board/km: remove kirkwood boards

These boards are out of maintenance and can be removed.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
Reviewed-by: Stefan Roese <sr@denx.de>

2 files changed, 0 insertions, 276 deletions

diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
deleted file mode 100644
index a91e5e8f86..0000000000
--- a/include/configs/km/km_arm.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2010-2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- */
-
-/*
- * for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
- */
-
-#ifndef _CONFIG_KM_ARM_H
-#define _CONFIG_KM_ARM_H
-
-#define CONFIG_NAND_ECC_BCH
-
-/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-
-/* Increase max size of compressed kernel */
-
-#include "asm/arch/config.h"
-
-/* architecture specific default bootargs */
-#define CONFIG_KM_DEF_BOOT_ARGS_CPU					\
-		"bootcountaddr=${bootcountaddr} ${mtdparts}"		\
-		" boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
-
-#define CONFIG_KM_DEF_ENV_CPU						\
-	"u-boot=" CONFIG_HOSTNAME "/u-boot.kwb\0"		\
-	CONFIG_KM_UPDATE_UBOOT						\
-	"set_fdthigh=setenv fdt_high ${kernelmem}\0"			\
-	"checkfdt="							\
-		"if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; "	\
-		"then true; else setenv cramfsloadfdt true; "		\
-		"setenv boot bootm ${load_addr_r}; "			\
-		"echo No FDT found, booting with the kernel "		\
-		"appended one; fi\0"					\
-	""
-
-/*
- * NAND Flash configuration
- */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-/*
- * Other required minimal configurations
- */
-
-/*
- * Ethernet Driver configuration
- */
-#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer autoneg timeout */
-#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0
-
-/*
- * I2C related stuff
- */
-#undef CONFIG_I2C_MVTWSI
-#define CONFIG_SYS_I2C_INIT_BOARD
-
-#define CONFIG_SYS_NUM_I2C_BUSES	6
-#define CONFIG_SYS_I2C_MAX_HOPS		1
-#define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
-				}
-
-#ifndef __ASSEMBLY__
-#include <asm/arch/gpio.h>
-#include <linux/delay.h>
-#include <linux/stringify.h>
-extern void __set_direction(unsigned pin, int high);
-#define KM_KIRKWOOD_SDA_PIN	8
-#define KM_KIRKWOOD_SCL_PIN	9
-#define KM_KIRKWOOD_SOFT_I2C_GPIOS	0x0300
-#define KM_KIRKWOOD_ENV_WP	38
-
-#define I2C_ACTIVE	__set_direction(KM_KIRKWOOD_SDA_PIN, 0)
-#define I2C_TRISTATE	__set_direction(KM_KIRKWOOD_SDA_PIN, 1)
-#define I2C_READ	(kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
-#define I2C_SDA(bit)	kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
-#define I2C_SCL(bit)	kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
-#endif
-
-#define I2C_DELAY	udelay(1)
-#define I2C_SOFT_DECLARATIONS
-
-/*
- *  Environment variables configurations
- */
-#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define CONFIG_ENV_TOTAL_SIZE		0x20000     /* no bracets! */
-#else
-#define CONFIG_SYS_EEPROM_WREN
-#define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
-#endif
-
-#define KM_FLASH_GPIO_PIN	16
-
-#define	CONFIG_KM_UPDATE_UBOOT						\
-	"update="							\
-		"sf probe 0;sf erase 0 +${filesize};"			\
-		"sf write ${load_addr_r} 0 ${filesize};\0"
-
-#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
-#define CONFIG_KM_NEW_ENV						\
-	"newenv=sf probe 0;"						\
-		"sf erase " __stringify(CONFIG_ENV_OFFSET) " "		\
-		__stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
-#else
-#define CONFIG_KM_NEW_ENV						\
-	"newenv=setenv addr 0x100000 && "				\
-		"i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; "  \
-		"mw.b ${addr} 0 4 && "					\
-		"eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR)	\
-		" ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && "	\
-		"eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR)	\
-		" ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
-#endif
-
-#ifndef CONFIG_KM_BOARD_EXTRA_ENV
-#define CONFIG_KM_BOARD_EXTRA_ENV       ""
-#endif
-
-/*
- * Default environment variables
- */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_KM_BOARD_EXTRA_ENV					\
-	CONFIG_KM_DEF_ENV						\
-	CONFIG_KM_NEW_ENV						\
-	"arch=arm\0"							\
-	""
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-
-/* address for the bootcount (taken from end of RAM) */
-#define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
-
-/* enable POST tests */
-#define CONFIG_POST	(CONFIG_SYS_POST_MEM_REGIONS)
-#define CONFIG_POST_SKIP_ENV_FLAGS
-#define CONFIG_POST_EXTERNAL_WORD_FUNCS
-
-#endif /* _CONFIG_KM_ARM_H */
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
deleted file mode 100644
index 01482d5319..0000000000
--- a/include/configs/km_kirkwood.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2011-2012
- * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
- * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
- */
-
-/*
- * for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
- */
-
-#ifndef _CONFIG_KM_KIRKWOOD_H
-#define _CONFIG_KM_KIRKWOOD_H
-
-/* KM_KIRKWOOD */
-#if defined(CONFIG_KM_KIRKWOOD)
-#define CONFIG_HOSTNAME			"km_kirkwood"
-
-/* KM_KIRKWOOD_PCI */
-#elif defined(CONFIG_KM_KIRKWOOD_PCI)
-#define CONFIG_HOSTNAME			"km_kirkwood_pci"
-#define CONFIG_KM_UBI_PART_BOOT_OPTS		",2048"
-#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-
-/* KM_KIRKWOOD_128M16 */
-#elif defined(CONFIG_KM_KIRKWOOD_128M16)
-#define CONFIG_HOSTNAME			"km_kirkwood_128m16"
-
-/* KM_NUSA */
-#elif defined(CONFIG_KM_NUSA)
-
-#define CONFIG_HOSTNAME			"kmnusa"
-
-/* KMCOGE5UN */
-#elif defined(CONFIG_KM_COGE5UN)
-#define CONFIG_HOSTNAME			"kmcoge5un"
-
-/* KM_SUSE2 */
-#elif defined(CONFIG_KM_SUSE2)
-#define CONFIG_HOSTNAME			"kmsuse2"
-#define CONFIG_KM_UBI_PART_BOOT_OPTS		",2048"
-#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
-#else
-#error ("Board unsupported")
-#endif
-
-/* include common defines/options for all arm based Keymile boards */
-#include "km/km_arm.h"
-
-#if defined(CONFIG_KM_PIGGY4_88E6352)
-/*
- * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
- * an Marvell 88E6352 simple switch.
- * In this case we have to change the default settings for the etherent mac.
- * There is NO ethernet phy. The ARM and Switch are conencted directly over
- * RGMII in MAC-MAC mode
- * In this case 1GBit full duplex and autoneg off
- */
-#define PORT_SERIAL_CONTROL_VALUE		( \
-	MVGBE_FORCE_LINK_PASS			    | \
-	MVGBE_DIS_AUTO_NEG_FOR_DUPLX		| \
-	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	| \
-	MVGBE_ADV_NO_FLOW_CTRL			    | \
-	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	| \
-	MVGBE_FORCE_BP_MODE_NO_JAM		    | \
-	(1 << 9) /* Reserved bit has to be 1 */	| \
-	MVGBE_DO_NOT_FORCE_LINK_FAIL		| \
-	MVGBE_DIS_AUTO_NEG_SPEED_GMII		| \
-	MVGBE_DTE_ADV_0				        | \
-	MVGBE_MIIPHY_MAC_MODE			    | \
-	MVGBE_AUTO_NEG_NO_CHANGE		    | \
-	MVGBE_MAX_RX_PACKET_1552BYTE		| \
-	MVGBE_CLR_EXT_LOOPBACK			    | \
-	MVGBE_SET_FULL_DUPLEX_MODE		    | \
-	MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	|\
-	MVGBE_SET_GMII_SPEED_TO_1000	    |\
-	MVGBE_SET_MII_SPEED_TO_100)
-
-#endif
-
-#ifdef CONFIG_KM_PIGGY4_88E6061
-/*
- * Some keymile boards like mgcoge5un have their PIGGY4 connected via
- * an Marvell 88E6061 simple switch.
- * In this case we have to change the default settings for the
- * ethernet phy connected to the kirkwood.
- * In this case 100MB full duplex and autoneg off
- */
-#define PORT_SERIAL_CONTROL_VALUE		( \
-	MVGBE_FORCE_LINK_PASS			| \
-	MVGBE_DIS_AUTO_NEG_FOR_DUPLX		| \
-	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	| \
-	MVGBE_ADV_NO_FLOW_CTRL			| \
-	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	| \
-	MVGBE_FORCE_BP_MODE_NO_JAM		| \
-	(1 << 9) /* Reserved bit has to be 1 */	| \
-	MVGBE_DO_NOT_FORCE_LINK_FAIL		| \
-	MVGBE_DIS_AUTO_NEG_SPEED_GMII		| \
-	MVGBE_DTE_ADV_0				| \
-	MVGBE_MIIPHY_MAC_MODE			| \
-	MVGBE_AUTO_NEG_NO_CHANGE		| \
-	MVGBE_MAX_RX_PACKET_1552BYTE		| \
-	MVGBE_CLR_EXT_LOOPBACK			| \
-	MVGBE_SET_FULL_DUPLEX_MODE		| \
-	MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	|\
-	MVGBE_SET_GMII_SPEED_TO_10_100	|\
-	MVGBE_SET_MII_SPEED_TO_100)
-#endif
-
-#endif /* _CONFIG_KM_KIRKWOOD */