arm: rpi: Switch to a text environment

Use the new environment format so we can drop most of the config.h file.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 100 deletions

diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 4160db2d8e..8e56bdc84a 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -13,8 +13,6 @@
 #include <asm/arch/base.h>
 #endif
 
-/* Architecture, CPU, etc.*/
-
 /* Use SoC timer for AArch32, but architected timer for AArch64 */
 #ifndef CONFIG_ARM64
 #define CFG_SYS_TIMER_RATE		1000000
@@ -33,102 +31,4 @@
  */
 #define CFG_SYS_SDRAM_SIZE		SZ_128M
 
-/* Devices */
-/* LCD */
-
-/* DFU over USB/UDC */
-#ifdef CONFIG_CMD_DFU
-#ifdef CONFIG_ARM64
-#define KERNEL_FILENAME		"Image"
-#else
-#define KERNEL_FILENAME		"zImage"
-#endif
-
-#define ENV_DFU_SETTINGS \
-	"dfu_alt_info=u-boot.bin fat 0 1;uboot.env fat 0 1;" \
-		      "config.txt fat 0 1;" \
-		      KERNEL_FILENAME " fat 0 1\0"
-#else
-#define ENV_DFU_SETTINGS ""
-#endif
-
-/* Console configuration */
-
-/* Environment */
-
-/* Shell */
-
-/* Environment */
-#define ENV_DEVICE_SETTINGS \
-	"stdin=serial,usbkbd\0" \
-	"stdout=serial,vidconsole\0" \
-	"stderr=serial,vidconsole\0"
-
-#ifdef CONFIG_ARM64
-#define FDT_HIGH "ffffffffffffffff"
-#define INITRD_HIGH "ffffffffffffffff"
-#else
-#define FDT_HIGH "ffffffff"
-#define INITRD_HIGH "ffffffff"
-#endif
-
-/*
- * Memory layout for where various images get loaded by boot scripts:
- *
- * I suspect address 0 is used as the SMP pen on the RPi2, so avoid this.
- *
- * Older versions of the boot firmware place the firmware-loaded DTB at 0x100,
- * newer versions place it in high memory. So prevent U-Boot from doing its own
- * DTB + initrd relocation so that we won't accidentally relocate the initrd
- * over the firmware-loaded DTB and generally try to lay out things starting
- * from the bottom of RAM.
- *
- * kernel_addr_r has different constraints on ARM and Aarch64.  For 32-bit ARM,
- * it must be within the first 128M of RAM in order for the kernel's
- * CONFIG_AUTO_ZRELADDR option to work. The kernel itself will be decompressed
- * to 0x8000 but the decompressor clobbers 0x4000-0x8000 as well. The
- * decompressor also likes to relocate itself to right past the end of the
- * decompressed kernel, so in total the sum of the compressed and and
- * decompressed kernel needs to be reserved.
- *
- *   For Aarch64, the kernel image is uncompressed and must be loaded at
- *   text_offset bytes (specified in the header of the Image) into a 2MB
- *   boundary. The 'booti' command relocates the image if necessary. Linux uses
- *   a default text_offset of 0x80000.  In summary, loading at 0x80000
- *   satisfies all these constraints and reserving memory up to 0x02400000
- *   permits fairly large (roughly 36M) kernels.
- *
- * scriptaddr and pxefile_addr_r can be pretty much anywhere that doesn't
- * conflict with something else. Reserving 1M for each of them at
- * 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty.
- *
- * On ARM, both the DTB and any possible initrd must be loaded such that they
- * fit inside the lowmem mapping in Linux. In practice, this usually means not
- * more than ~700M away from the start of the kernel image but this number can
- * be larger OR smaller depending on e.g. the 'vmalloc=xxxM' command line
- * parameter given to the kernel. So reserving memory from low to high
- * satisfies this constraint again. Reserving 1M at 0x02600000-0x02700000 for
- * the DTB leaves rest of the free RAM to the initrd starting at 0x02700000.
- * Even with the smallest possible CPU-GPU memory split of the CPU getting
- * only 64M, the remaining 25M starting at 0x02700000 should allow quite
- * large initrds before they start colliding with U-Boot.
- */
-#define ENV_MEM_LAYOUT_SETTINGS \
-	"fdt_high=" FDT_HIGH "\0" \
-	"initrd_high=" INITRD_HIGH "\0" \
-	"kernel_addr_r=0x00080000\0" \
-	"scriptaddr=0x02400000\0" \
-	"pxefile_addr_r=0x02500000\0" \
-	"fdt_addr_r=0x02600000\0" \
-	"ramdisk_addr_r=0x02700000\0"
-
-#define BOOT_TARGETS	"mmc usb pxe dhcp"
-
-#define CFG_EXTRA_ENV_SETTINGS \
-	"dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \
-	ENV_DEVICE_SETTINGS \
-	ENV_DFU_SETTINGS \
-	ENV_MEM_LAYOUT_SETTINGS \
-	"boot_targets=" BOOT_TARGETS "\0"
-
 #endif