diff options
author | Simon Glass <sjg@chromium.org> | 2019-08-24 16:22:48 +0300 |
---|---|---|
committer | Simon Glass <sjg@chromium.org> | 2019-10-15 17:40:02 +0300 |
commit | 2250ee6ee681564115d82f9f9c63497ccfb5fdd7 (patch) | |
tree | b991315ca7bfdbf6317f215aad47d2151e05ed6a /tools/binman | |
parent | 3da9ce8dd44399dfca4b0639101f5154dbbaa93f (diff) | |
download | u-boot-2250ee6ee681564115d82f9f9c63497ccfb5fdd7.tar.xz |
binman: Add support for an x86 'reset' section
At present binman has a single entry type for the 16-bit code code needed
to start up an x86 processor. This entry is intended to include both the
reset vector itself as well as the code to move to 32-bit mode.
However this is not very flexible since in some cases other data needs to
be included at the top of the SPI flash, in between these two pieces. For
example Intel requires that a FIT (Firmware Image Table) pointer be placed
0x40 bytes before the end of the ROM.
To deal with this, add a new reset entry for just the reset vector. A
subsequent change will adjust the existing 'start16' entry.
Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'tools/binman')
-rw-r--r-- | tools/binman/README.entries | 48 | ||||
-rw-r--r-- | tools/binman/etype/x86_reset16.py | 29 | ||||
-rw-r--r-- | tools/binman/etype/x86_reset16_spl.py | 29 | ||||
-rw-r--r-- | tools/binman/etype/x86_reset16_tpl.py | 29 | ||||
-rw-r--r-- | tools/binman/ftest.py | 30 | ||||
-rw-r--r-- | tools/binman/test/144_x86_reset16.dts | 13 | ||||
-rw-r--r-- | tools/binman/test/145_x86_reset16_spl.dts | 13 | ||||
-rw-r--r-- | tools/binman/test/146_x86_reset16_tpl.dts | 13 |
8 files changed, 203 insertions, 1 deletions
diff --git a/tools/binman/README.entries b/tools/binman/README.entries index 11c55fd8c8..55e3fa0dcc 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -937,6 +937,54 @@ and kernel are genuine. +Entry: x86-reset16: x86 16-bit reset code for U-Boot +---------------------------------------------------- + +Properties / Entry arguments: + - filename: Filename of u-boot-x86-reset16.bin (default + 'u-boot-x86-reset16.bin') + +x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code +must be placed at a particular address. This entry holds that code. It is +typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible +for jumping to the x86-start16 code, which continues execution. + +For 64-bit U-Boot, the 'x86_reset16_spl' entry type is used instead. + + + +Entry: x86-reset16-spl: x86 16-bit reset code for U-Boot +-------------------------------------------------------- + +Properties / Entry arguments: + - filename: Filename of u-boot-x86-reset16.bin (default + 'u-boot-x86-reset16.bin') + +x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code +must be placed at a particular address. This entry holds that code. It is +typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible +for jumping to the x86-start16 code, which continues execution. + +For 32-bit U-Boot, the 'x86_reset_spl' entry type is used instead. + + + +Entry: x86-reset16-tpl: x86 16-bit reset code for U-Boot +-------------------------------------------------------- + +Properties / Entry arguments: + - filename: Filename of u-boot-x86-reset16.bin (default + 'u-boot-x86-reset16.bin') + +x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code +must be placed at a particular address. This entry holds that code. It is +typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible +for jumping to the x86-start16 code, which continues execution. + +For 32-bit U-Boot, the 'x86_reset_tpl' entry type is used instead. + + + Entry: x86-start16: x86 16-bit start-up code for U-Boot ------------------------------------------------------- diff --git a/tools/binman/etype/x86_reset16.py b/tools/binman/etype/x86_reset16.py new file mode 100644 index 0000000000..54eb814ea3 --- /dev/null +++ b/tools/binman/etype/x86_reset16.py @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2016 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for the 16-bit x86 reset code for U-Boot +# + +from entry import Entry +from blob import Entry_blob + +class Entry_x86_reset16(Entry_blob): + """x86 16-bit reset code for U-Boot + + Properties / Entry arguments: + - filename: Filename of u-boot-x86-reset16.bin (default + 'u-boot-x86-reset16.bin') + + x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code + must be placed at a particular address. This entry holds that code. It is + typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible + for jumping to the x86-start16 code, which continues execution. + + For 64-bit U-Boot, the 'x86_reset16_spl' entry type is used instead. + """ + def __init__(self, section, etype, node): + Entry_blob.__init__(self, section, etype, node) + + def GetDefaultFilename(self): + return 'u-boot-x86-reset16.bin' diff --git a/tools/binman/etype/x86_reset16_spl.py b/tools/binman/etype/x86_reset16_spl.py new file mode 100644 index 0000000000..699a0c6bcb --- /dev/null +++ b/tools/binman/etype/x86_reset16_spl.py @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2016 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for the 16-bit x86 reset code for U-Boot +# + +from entry import Entry +from blob import Entry_blob + +class Entry_x86_reset16_spl(Entry_blob): + """x86 16-bit reset code for U-Boot + + Properties / Entry arguments: + - filename: Filename of u-boot-x86-reset16.bin (default + 'u-boot-x86-reset16.bin') + + x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code + must be placed at a particular address. This entry holds that code. It is + typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible + for jumping to the x86-start16 code, which continues execution. + + For 32-bit U-Boot, the 'x86_reset_spl' entry type is used instead. + """ + def __init__(self, section, etype, node): + Entry_blob.__init__(self, section, etype, node) + + def GetDefaultFilename(self): + return 'spl/u-boot-x86-reset16-spl.bin' diff --git a/tools/binman/etype/x86_reset16_tpl.py b/tools/binman/etype/x86_reset16_tpl.py new file mode 100644 index 0000000000..4eedb8d601 --- /dev/null +++ b/tools/binman/etype/x86_reset16_tpl.py @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2016 Google, Inc +# Written by Simon Glass <sjg@chromium.org> +# +# Entry-type module for the 16-bit x86 reset code for U-Boot +# + +from entry import Entry +from blob import Entry_blob + +class Entry_x86_reset16_tpl(Entry_blob): + """x86 16-bit reset code for U-Boot + + Properties / Entry arguments: + - filename: Filename of u-boot-x86-reset16.bin (default + 'u-boot-x86-reset16.bin') + + x86 CPUs start up in 16-bit mode, even if they are 32-bit CPUs. This code + must be placed at a particular address. This entry holds that code. It is + typically placed at offset CONFIG_RESET_VEC_LOC. The code is responsible + for jumping to the x86-start16 code, which continues execution. + + For 32-bit U-Boot, the 'x86_reset_tpl' entry type is used instead. + """ + def __init__(self, section, etype, node): + Entry_blob.__init__(self, section, etype, node) + + def GetDefaultFilename(self): + return 'tpl/u-boot-x86-reset16-tpl.bin' diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index acf361fa84..77445814a7 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -49,6 +49,9 @@ U_BOOT_TPL_DTB_DATA = b'tpldtb' X86_START16_DATA = b'start16' X86_START16_SPL_DATA = b'start16spl' X86_START16_TPL_DATA = b'start16tpl' +X86_RESET16_DATA = b'reset16' +X86_RESET16_SPL_DATA = b'reset16spl' +X86_RESET16_TPL_DATA = b'reset16tpl' PPC_MPC85XX_BR_DATA = b'ppcmpc85xxbr' U_BOOT_NODTB_DATA = b'nodtb with microcode pointer somewhere in here' U_BOOT_SPL_NODTB_DATA = b'splnodtb with microcode pointer somewhere in here' @@ -114,12 +117,22 @@ class TestFunctional(unittest.TestCase): TestFunctional._MakeInputFile('me.bin', ME_DATA) TestFunctional._MakeInputFile('vga.bin', VGA_DATA) cls._ResetDtbs() - TestFunctional._MakeInputFile('u-boot-x86-16bit.bin', X86_START16_DATA) + TestFunctional._MakeInputFile('u-boot-br.bin', PPC_MPC85XX_BR_DATA) + + TestFunctional._MakeInputFile('u-boot-x86-16bit.bin', X86_START16_DATA) TestFunctional._MakeInputFile('spl/u-boot-x86-16bit-spl.bin', X86_START16_SPL_DATA) TestFunctional._MakeInputFile('tpl/u-boot-x86-16bit-tpl.bin', X86_START16_TPL_DATA) + + TestFunctional._MakeInputFile('u-boot-x86-reset16.bin', + X86_RESET16_DATA) + TestFunctional._MakeInputFile('spl/u-boot-x86-reset16-spl.bin', + X86_RESET16_SPL_DATA) + TestFunctional._MakeInputFile('tpl/u-boot-x86-reset16-tpl.bin', + X86_RESET16_TPL_DATA) + TestFunctional._MakeInputFile('u-boot-nodtb.bin', U_BOOT_NODTB_DATA) TestFunctional._MakeInputFile('spl/u-boot-spl-nodtb.bin', U_BOOT_SPL_NODTB_DATA) @@ -3236,6 +3249,21 @@ class TestFunctional(unittest.TestCase): self.assertIn('Must specify exactly one entry path to write with -f', str(e.exception)) + def testPackReset16(self): + """Test that an image with an x86 reset16 region can be created""" + data = self._DoReadFile('144_x86_reset16.dts') + self.assertEqual(X86_RESET16_DATA, data[:len(X86_RESET16_DATA)]) + + def testPackReset16Spl(self): + """Test that an image with an x86 reset16-spl region can be created""" + data = self._DoReadFile('145_x86_reset16_spl.dts') + self.assertEqual(X86_RESET16_SPL_DATA, data[:len(X86_RESET16_SPL_DATA)]) + + def testPackReset16Tpl(self): + """Test that an image with an x86 reset16-tpl region can be created""" + data = self._DoReadFile('146_x86_reset16_tpl.dts') + self.assertEqual(X86_RESET16_TPL_DATA, data[:len(X86_RESET16_TPL_DATA)]) + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/test/144_x86_reset16.dts b/tools/binman/test/144_x86_reset16.dts new file mode 100644 index 0000000000..ba90333b27 --- /dev/null +++ b/tools/binman/test/144_x86_reset16.dts @@ -0,0 +1,13 @@ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + size = <16>; + + x86-reset16 { + }; + }; +}; diff --git a/tools/binman/test/145_x86_reset16_spl.dts b/tools/binman/test/145_x86_reset16_spl.dts new file mode 100644 index 0000000000..cc8d97a7e6 --- /dev/null +++ b/tools/binman/test/145_x86_reset16_spl.dts @@ -0,0 +1,13 @@ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + size = <16>; + + x86-reset16-spl { + }; + }; +}; diff --git a/tools/binman/test/146_x86_reset16_tpl.dts b/tools/binman/test/146_x86_reset16_tpl.dts new file mode 100644 index 0000000000..041b16f3de --- /dev/null +++ b/tools/binman/test/146_x86_reset16_tpl.dts @@ -0,0 +1,13 @@ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + size = <16>; + + x86-reset16-tpl { + }; + }; +}; |