summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.azure-pipelines.yml2
-rw-r--r--.gitignore3
-rw-r--r--.gitlab-ci.yml2
-rw-r--r--.travis.yml2
-rw-r--r--arch/arm/dts/k3-am65-wakeup.dtsi5
-rw-r--r--arch/arm/dts/k3-am654-base-board-u-boot.dtsi4
-rw-r--r--arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi4
-rw-r--r--arch/arm/dts/k3-j721e-mcu-wakeup.dtsi5
-rw-r--r--arch/arm/mach-k3/common.c48
-rw-r--r--arch/arm/mach-k3/common.h6
-rw-r--r--arch/arm/mach-k3/include/mach/hardware.h1
-rw-r--r--arch/arm/mach-snapdragon/clock-snapdragon.c2
-rw-r--r--arch/arm/mach-snapdragon/pinctrl-snapdragon.c2
-rw-r--r--arch/nios2/cpu/cpu.c8
-rw-r--r--arch/sandbox/dts/test.dts4
-rw-r--r--arch/x86/cpu/apollolake/cpu.c2
-rw-r--r--arch/x86/cpu/baytrail/cpu.c4
-rw-r--r--arch/x86/cpu/broadwell/cpu_full.c4
-rw-r--r--arch/x86/cpu/cpu_x86.c6
-rw-r--r--arch/x86/cpu/ivybridge/model_206ax.c5
-rw-r--r--arch/x86/cpu/qemu/cpu.c4
-rw-r--r--arch/x86/include/asm/cpu_x86.h6
-rw-r--r--board/renesas/rcar-common/common.c4
-rw-r--r--common/fdt_region.c2
-rw-r--r--common/fdt_support.c32
-rw-r--r--configs/am65x_evm_a53_defconfig2
-rw-r--r--configs/am65x_evm_r5_defconfig2
-rw-r--r--configs/am65x_hs_evm_a53_defconfig2
-rw-r--r--configs/am65x_hs_evm_r5_defconfig2
-rw-r--r--configs/j721e_evm_a72_defconfig2
-rw-r--r--configs/j721e_evm_r5_defconfig2
-rw-r--r--configs/j721e_hs_evm_a72_defconfig2
-rw-r--r--configs/j721e_hs_evm_r5_defconfig2
-rw-r--r--configs/sandbox64_defconfig1
-rw-r--r--configs/sandbox_defconfig1
-rw-r--r--configs/sandbox_flattree_defconfig1
-rw-r--r--configs/sandbox_spl_defconfig1
-rw-r--r--doc/driver-model/index.rst1
-rw-r--r--doc/driver-model/soc-framework.rst68
-rw-r--r--doc/mkimage.19
-rw-r--r--drivers/adc/exynos-adc.c2
-rw-r--r--drivers/ata/dwc_ahci.c2
-rw-r--r--drivers/clk/altera/clk-agilex.c2
-rw-r--r--drivers/clk/altera/clk-arria10.c2
-rw-r--r--drivers/clk/exynos/clk-exynos7420.c4
-rw-r--r--drivers/clk/renesas/clk-rcar-gen2.c2
-rw-r--r--drivers/clk/renesas/clk-rcar-gen3.c2
-rw-r--r--drivers/clk/uniphier/clk-uniphier-core.c2
-rw-r--r--drivers/core/device.c3
-rw-r--r--drivers/cpu/bmips_cpu.c8
-rw-r--r--drivers/cpu/cpu-uclass.c8
-rw-r--r--drivers/cpu/cpu_sandbox.c8
-rw-r--r--drivers/cpu/imx8_cpu.c8
-rw-r--r--drivers/cpu/mpc83xx_cpu.c26
-rw-r--r--drivers/cpu/riscv_cpu.c8
-rw-r--r--drivers/dma/ti-edma3.c2
-rw-r--r--drivers/gpio/altera_pio.c2
-rw-r--r--drivers/gpio/atmel_pio4.c2
-rw-r--r--drivers/gpio/bcm2835_gpio.c2
-rw-r--r--drivers/gpio/da8xx_gpio.c2
-rw-r--r--drivers/gpio/gpio-rcar.c2
-rw-r--r--drivers/gpio/gpio-rza1.c2
-rw-r--r--drivers/gpio/gpio-uniphier.c2
-rw-r--r--drivers/gpio/msm_gpio.c2
-rw-r--r--drivers/gpio/mvebu_gpio.c2
-rw-r--r--drivers/gpio/mxc_gpio.c2
-rw-r--r--drivers/gpio/mxs_gpio.c2
-rw-r--r--drivers/gpio/omap_gpio.c4
-rw-r--r--drivers/gpio/pm8916_gpio.c2
-rw-r--r--drivers/gpio/s5p_gpio.c4
-rw-r--r--drivers/gpio/sifive-gpio.c2
-rw-r--r--drivers/gpio/sunxi_gpio.c2
-rw-r--r--drivers/gpio/vybrid_gpio.c2
-rw-r--r--drivers/i2c/at91_i2c.c2
-rw-r--r--drivers/i2c/davinci_i2c.c2
-rw-r--r--drivers/i2c/exynos_hs_i2c.c2
-rw-r--r--drivers/i2c/i2c-uniphier-f.c2
-rw-r--r--drivers/i2c/i2c-uniphier.c2
-rw-r--r--drivers/i2c/imx_lpi2c.c2
-rw-r--r--drivers/i2c/iproc_i2c.c2
-rw-r--r--drivers/i2c/mxc_i2c.c2
-rw-r--r--drivers/i2c/omap24xx_i2c.c2
-rw-r--r--drivers/i2c/s3c24x0_i2c.c2
-rw-r--r--drivers/input/tegra-kbc.c2
-rw-r--r--drivers/mailbox/tegra-hsp.c2
-rw-r--r--drivers/misc/altera_sysid.c2
-rw-r--r--drivers/misc/imx8/scu.c2
-rw-r--r--drivers/misc/microchip_flexcom.c2
-rw-r--r--drivers/mmc/aspeed_sdhci.c2
-rw-r--r--drivers/mmc/atmel_sdhci.c2
-rw-r--r--drivers/mmc/bcm2835_sdhci.c2
-rw-r--r--drivers/mmc/bcm2835_sdhost.c2
-rw-r--r--drivers/mmc/bcmstb_sdhci.c2
-rw-r--r--drivers/mmc/ftsdc010_mci.c2
-rw-r--r--drivers/mmc/hi6220_dw_mmc.c2
-rw-r--r--drivers/mmc/iproc_sdhci.c2
-rw-r--r--drivers/mmc/jz_mmc.c2
-rw-r--r--drivers/mmc/meson_gx_mmc.c2
-rw-r--r--drivers/mmc/msm_sdhci.c2
-rw-r--r--drivers/mmc/mv_sdhci.c2
-rw-r--r--drivers/mmc/omap_hsmmc.c4
-rw-r--r--drivers/mmc/sdhci-cadence.c2
-rw-r--r--drivers/mmc/sh_mmcif.c2
-rw-r--r--drivers/mmc/sh_sdhi.c2
-rw-r--r--drivers/mmc/socfpga_dw_mmc.c2
-rw-r--r--drivers/mmc/sti_sdhci.c2
-rw-r--r--drivers/mmc/tangier_sdhci.c2
-rw-r--r--drivers/mmc/tmio-common.c2
-rw-r--r--drivers/mmc/xenon_sdhci.c2
-rw-r--r--drivers/net/ag7xxx.c2
-rw-r--r--drivers/net/dwc_eth_qos.c4
-rw-r--r--drivers/net/ethoc.c2
-rw-r--r--drivers/net/fec_mxc.c2
-rw-r--r--drivers/net/fsl_mcdmafec.c2
-rw-r--r--drivers/net/ftgmac100.c2
-rw-r--r--drivers/net/ftmac100.c2
-rw-r--r--drivers/net/ks8851_mll.c2
-rw-r--r--drivers/net/mcffec.c2
-rw-r--r--drivers/net/mtk_eth.c2
-rw-r--r--drivers/net/mvgbe.c2
-rw-r--r--drivers/net/mvneta.c2
-rw-r--r--drivers/net/ravb.c2
-rw-r--r--drivers/net/sh_eth.c2
-rw-r--r--drivers/net/smc911x.c2
-rw-r--r--drivers/net/sni_ave.c2
-rw-r--r--drivers/net/sun8i_emac.c2
-rw-r--r--drivers/net/sunxi_emac.c2
-rw-r--r--drivers/net/ti/keystone_net.c2
-rw-r--r--drivers/net/xilinx_axi_emac.c2
-rw-r--r--drivers/net/xilinx_emaclite.c2
-rw-r--r--drivers/pci_endpoint/pcie-cadence-ep.c2
-rw-r--r--drivers/pinctrl/ath79/pinctrl_ar933x.c2
-rw-r--r--drivers/pinctrl/ath79/pinctrl_qca953x.c2
-rw-r--r--drivers/pinctrl/exynos/pinctrl-exynos.c2
-rw-r--r--drivers/pinctrl/mvebu/pinctrl-armada-37xx.c2
-rw-r--r--drivers/pinctrl/pinctrl-at91-pio4.c2
-rw-r--r--drivers/pinctrl/renesas/pfc-r7s72100.c2
-rw-r--r--drivers/pinctrl/renesas/pfc.c2
-rw-r--r--drivers/pinctrl/uniphier/pinctrl-uniphier-core.c2
-rw-r--r--drivers/pwm/exynos_pwm.c2
-rw-r--r--drivers/pwm/pwm-imx.c2
-rw-r--r--drivers/pwm/pwm-mtk.c2
-rw-r--r--drivers/pwm/sunxi_pwm.c2
-rw-r--r--drivers/reset/reset-uniphier.c2
-rw-r--r--drivers/rtc/mvrtc.c2
-rw-r--r--drivers/serial/altera_jtag_uart.c2
-rw-r--r--drivers/serial/altera_uart.c2
-rw-r--r--drivers/serial/atmel_usart.c2
-rw-r--r--drivers/serial/serial_ar933x.c2
-rw-r--r--drivers/serial/serial_arc.c2
-rw-r--r--drivers/serial/serial_bcm283x_mu.c2
-rw-r--r--drivers/serial/serial_lpuart.c2
-rw-r--r--drivers/serial/serial_mcf.c2
-rw-r--r--drivers/serial/serial_meson.c2
-rw-r--r--drivers/serial/serial_msm.c2
-rw-r--r--drivers/serial/serial_mxc.c2
-rw-r--r--drivers/serial/serial_pl01x.c2
-rw-r--r--drivers/serial/serial_s5p.c2
-rw-r--r--drivers/serial/serial_sh.c2
-rw-r--r--drivers/serial/serial_sti_asc.c2
-rw-r--r--drivers/serial/serial_stm32.c2
-rw-r--r--drivers/serial/serial_uniphier.c2
-rw-r--r--drivers/serial/serial_xuartlite.c2
-rw-r--r--drivers/soc/Kconfig16
-rw-r--r--drivers/soc/Makefile3
-rw-r--r--drivers/soc/soc-uclass.c102
-rw-r--r--drivers/soc/soc_sandbox.c56
-rw-r--r--drivers/soc/soc_ti_k3.c124
-rw-r--r--drivers/spi/altera_spi.c2
-rw-r--r--drivers/spi/atcspi200_spi.c2
-rw-r--r--drivers/spi/ath79_spi.c2
-rw-r--r--drivers/spi/atmel_spi.c2
-rw-r--r--drivers/spi/cf_spi.c2
-rw-r--r--drivers/spi/davinci_spi.c2
-rw-r--r--drivers/spi/designware_spi.c2
-rw-r--r--drivers/spi/exynos_spi.c2
-rw-r--r--drivers/spi/fsl_dspi.c2
-rw-r--r--drivers/spi/kirkwood_spi.c2
-rw-r--r--drivers/spi/mtk_snfi_spi.c2
-rw-r--r--drivers/spi/mvebu_a3700_spi.c2
-rw-r--r--drivers/spi/mxc_spi.c2
-rw-r--r--drivers/spi/omap3_spi.c2
-rw-r--r--drivers/spi/spi-sunxi.c2
-rw-r--r--drivers/spi/tegra20_sflash.c2
-rw-r--r--drivers/spi/tegra20_slink.c2
-rw-r--r--drivers/spi/ti_qspi.c2
-rw-r--r--drivers/spi/zynq_spi.c2
-rw-r--r--drivers/spi/zynqmp_gqspi.c4
-rw-r--r--drivers/spmi/spmi-msm.c2
-rw-r--r--drivers/timer/ag101p_timer.c2
-rw-r--r--drivers/timer/altera_timer.c2
-rw-r--r--drivers/timer/atcpit100_timer.c2
-rw-r--r--drivers/timer/omap-timer.c2
-rw-r--r--drivers/usb/dwc3/dwc3-uniphier.c2
-rw-r--r--drivers/usb/host/ehci-atmel.c2
-rw-r--r--drivers/usb/host/ehci-exynos.c2
-rw-r--r--drivers/usb/host/ehci-fsl.c2
-rw-r--r--drivers/usb/host/ehci-marvell.c2
-rw-r--r--drivers/usb/host/ehci-mx5.c2
-rw-r--r--drivers/usb/host/ehci-mx6.c4
-rw-r--r--drivers/usb/host/ehci-omap.c2
-rw-r--r--drivers/usb/host/ehci-vf.c2
-rw-r--r--drivers/usb/host/ohci-da8xx.c2
-rw-r--r--drivers/usb/host/ohci-generic.c2
-rw-r--r--drivers/usb/host/xhci-exynos5.c2
-rw-r--r--drivers/usb/host/xhci-fsl.c2
-rw-r--r--drivers/usb/host/xhci-mvebu.c2
-rw-r--r--drivers/usb/host/xhci-rcar.c2
-rw-r--r--drivers/video/atmel_hlcdfb.c2
-rw-r--r--drivers/video/exynos/exynos_dp.c2
-rw-r--r--drivers/video/exynos/exynos_fb.c2
-rw-r--r--drivers/video/tegra.c2
-rw-r--r--drivers/w1/mxc_w1.c2
-rw-r--r--drivers/watchdog/omap_wdt.c2
-rw-r--r--drivers/watchdog/stm32mp_wdt.c2
-rw-r--r--include/cpu.h16
-rw-r--r--include/dm/uclass-id.h1
-rw-r--r--include/fdtdec.h39
-rw-r--r--include/soc.h145
-rw-r--r--lib/fdtdec.c29
-rw-r--r--scripts/dtc/pylibfdt/Makefile3
-rw-r--r--test/dm/Makefile1
-rw-r--r--test/dm/acpi.c3
-rw-r--r--test/dm/core.c10
-rw-r--r--test/dm/devres.c1
-rw-r--r--test/dm/soc.c120
-rw-r--r--test/dm/test-fdt.c2
-rw-r--r--test/dm/virtio.c7
-rwxr-xr-xtest/run2
-rw-r--r--tools/binman/README.entries76
-rw-r--r--tools/binman/cmdline.py2
-rw-r--r--tools/binman/control.py19
-rw-r--r--tools/binman/entry.py21
-rw-r--r--tools/binman/etype/_testing.py9
-rw-r--r--tools/binman/etype/blob.py2
-rw-r--r--tools/binman/etype/blob_dtb.py6
-rw-r--r--tools/binman/etype/blob_ext.py39
-rw-r--r--tools/binman/etype/blob_named_by_arg.py2
-rw-r--r--tools/binman/etype/cbfs.py16
-rw-r--r--tools/binman/etype/cros_ec_rw.py4
-rw-r--r--tools/binman/etype/fdtmap.py2
-rw-r--r--tools/binman/etype/files.py2
-rw-r--r--tools/binman/etype/fill.py4
-rw-r--r--tools/binman/etype/fit.py164
-rw-r--r--tools/binman/etype/fmap.py2
-rw-r--r--tools/binman/etype/gbb.py2
-rw-r--r--tools/binman/etype/image_header.py4
-rw-r--r--tools/binman/etype/intel_cmc.py7
-rw-r--r--tools/binman/etype/intel_descriptor.py15
-rw-r--r--tools/binman/etype/intel_fit.py8
-rw-r--r--tools/binman/etype/intel_fit_ptr.py8
-rw-r--r--tools/binman/etype/intel_fsp.py7
-rw-r--r--tools/binman/etype/intel_fsp_m.py7
-rw-r--r--tools/binman/etype/intel_fsp_s.py7
-rw-r--r--tools/binman/etype/intel_fsp_t.py7
-rw-r--r--tools/binman/etype/intel_ifwi.py25
-rw-r--r--tools/binman/etype/intel_me.py9
-rw-r--r--tools/binman/etype/intel_mrc.py7
-rw-r--r--tools/binman/etype/intel_refcode.py7
-rw-r--r--tools/binman/etype/intel_vbt.py7
-rw-r--r--tools/binman/etype/intel_vga.py7
-rw-r--r--tools/binman/etype/mkimage.py62
-rw-r--r--tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py5
-rw-r--r--tools/binman/etype/section.py58
-rw-r--r--tools/binman/etype/text.py2
-rw-r--r--tools/binman/etype/u_boot.py2
-rw-r--r--tools/binman/etype/u_boot_dtb.py2
-rw-r--r--tools/binman/etype/u_boot_dtb_with_ucode.py4
-rw-r--r--tools/binman/etype/u_boot_elf.py4
-rw-r--r--tools/binman/etype/u_boot_img.py2
-rw-r--r--tools/binman/etype/u_boot_nodtb.py2
-rw-r--r--tools/binman/etype/u_boot_spl.py2
-rw-r--r--tools/binman/etype/u_boot_spl_bss_pad.py2
-rw-r--r--tools/binman/etype/u_boot_spl_dtb.py2
-rw-r--r--tools/binman/etype/u_boot_spl_elf.py2
-rw-r--r--tools/binman/etype/u_boot_spl_nodtb.py2
-rw-r--r--tools/binman/etype/u_boot_spl_with_ucode_ptr.py2
-rw-r--r--tools/binman/etype/u_boot_tpl.py2
-rw-r--r--tools/binman/etype/u_boot_tpl_dtb.py2
-rw-r--r--tools/binman/etype/u_boot_tpl_dtb_with_ucode.py2
-rw-r--r--tools/binman/etype/u_boot_tpl_elf.py2
-rw-r--r--tools/binman/etype/u_boot_tpl_with_ucode_ptr.py2
-rw-r--r--tools/binman/etype/u_boot_ucode.py2
-rw-r--r--tools/binman/etype/u_boot_with_ucode_ptr.py2
-rw-r--r--tools/binman/etype/vblock.py2
-rw-r--r--tools/binman/etype/x86_reset16.py2
-rw-r--r--tools/binman/etype/x86_reset16_spl.py2
-rw-r--r--tools/binman/etype/x86_reset16_tpl.py2
-rw-r--r--tools/binman/etype/x86_start16.py2
-rw-r--r--tools/binman/etype/x86_start16_spl.py2
-rw-r--r--tools/binman/etype/x86_start16_tpl.py2
-rw-r--r--tools/binman/ftest.py140
-rw-r--r--tools/binman/image.py12
-rwxr-xr-xtools/binman/main.py18
-rw-r--r--tools/binman/test/156_mkimage.dts23
-rw-r--r--tools/binman/test/157_blob_ext.dts14
-rw-r--r--tools/binman/test/158_blob_ext_missing.dts16
-rw-r--r--tools/binman/test/159_blob_ext_missing_sect.dts23
-rw-r--r--tools/binman/test/160_pack_overlap_zero.dts18
-rw-r--r--tools/binman/test/161_fit.dts62
-rw-r--r--tools/binman/test/162_fit_external.dts64
-rw-r--r--tools/dtoc/fdt.py17
-rwxr-xr-xtools/dtoc/test_fdt.py4
-rw-r--r--tools/fit_image.c2
-rw-r--r--tools/imagetool.h1
-rw-r--r--tools/mkimage.c5
-rw-r--r--tools/patman/checkpatch.py6
-rw-r--r--tools/patman/commit.py14
-rw-r--r--tools/patman/control.py178
-rw-r--r--tools/patman/func_test.py169
-rw-r--r--tools/patman/gitutil.py48
-rwxr-xr-xtools/patman/main.py196
-rw-r--r--tools/patman/patchstream.py36
-rw-r--r--tools/patman/series.py2
-rw-r--r--tools/patman/settings.py10
-rw-r--r--tools/patman/terminal.py4
-rw-r--r--tools/patman/test_util.py21
-rw-r--r--tools/patman/tools.py12
-rw-r--r--tools/patman/tout.py6
319 files changed, 656 insertions, 2506 deletions
diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml
index 3e52f32890..97c89fc067 100644
--- a/.azure-pipelines.yml
+++ b/.azure-pipelines.yml
@@ -158,7 +158,7 @@ jobs:
./tools/binman/binman --toolpath ${UBOOT_TRAVIS_BUILD_DIR}/tools test
./tools/buildman/buildman -t
./tools/dtoc/dtoc -t
- ./tools/patman/patman test
+ ./tools/patman/patman --test
make O=${UBOOT_TRAVIS_BUILD_DIR} testconfig
EOF
cat build.sh
diff --git a/.gitignore b/.gitignore
index e66aa864da..2e1c8bf2bf 100644
--- a/.gitignore
+++ b/.gitignore
@@ -92,6 +92,3 @@ GTAGS
*.orig
*~
\#*#
-
-# Python cache
-__pycache__
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 6c8a323ad3..d2f864669d 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -169,7 +169,7 @@ Run binman, buildman, dtoc, Kconfig and patman testsuites:
./tools/binman/binman --toolpath ${UBOOT_TRAVIS_BUILD_DIR}/tools test;
./tools/buildman/buildman -t;
./tools/dtoc/dtoc -t;
- ./tools/patman/patman test;
+ ./tools/patman/patman --test;
make testconfig
Run tests for Nokia RX-51 (aka N900):
diff --git a/.travis.yml b/.travis.yml
index 9438bd13cf..1ff140855e 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -257,7 +257,7 @@ script:
export PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt";
export PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}";
./tools/binman/binman --toolpath ${UBOOT_TRAVIS_BUILD_DIR}/tools test &&
- ./tools/patman/patman test &&
+ ./tools/patman/patman --test &&
./tools/buildman/buildman -t &&
./tools/dtoc/dtoc -t &&
make testconfig;
diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
index 666c30d019..2676d6035b 100644
--- a/arch/arm/dts/k3-am65-wakeup.dtsi
+++ b/arch/arm/dts/k3-am65-wakeup.dtsi
@@ -62,9 +62,4 @@
clocks = <&k3_clks 115 1>;
power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
};
-
- chipid: chipid@43000014 {
- compatible = "ti,am654-chipid";
- reg = <0x43000014 0x4>;
- };
};
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index a30680d3e0..d9ff3ed47b 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -246,7 +246,3 @@
u-boot,dm-spl;
};
};
-
-&chipid {
- u-boot,dm-spl;
-};
diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
index cfb39325e9..6e748bfebb 100644
--- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
@@ -211,7 +211,3 @@
&mcu_fss0_ospi1_pins_default {
u-boot,dm-spl;
};
-
-&chipid {
- u-boot,dm-spl;
-};
diff --git a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
index 60695f5eb9..e6c99ab698 100644
--- a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi
@@ -316,9 +316,4 @@
ti,cpts-periodic-outputs = <2>;
};
};
-
- chipid: chipid@43000014 {
- compatible = "ti,am654-chipid";
- reg = <0x0 0x43000014 0x0 0x4>;
- };
};
diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index 4335f2877b..63bf060616 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -25,7 +25,6 @@
#include <fs.h>
#include <env.h>
#include <elf.h>
-#include <soc.h>
struct ti_sci_handle *get_ti_sci_handle(void)
{
@@ -309,27 +308,38 @@ void reset_cpu(ulong ignored)
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
- struct udevice *soc;
- char name[64];
- int ret;
-
- printf("SoC: ");
+ u32 soc, rev;
+ char *name;
- ret = soc_get(&soc);
- if (ret) {
- printf("UNKNOWN\n");
- return 0;
- }
+ soc = (readl(CTRLMMR_WKUP_JTAG_ID) &
+ JTAG_ID_PARTNO_MASK) >> JTAG_ID_PARTNO_SHIFT;
+ rev = (readl(CTRLMMR_WKUP_JTAG_ID) &
+ JTAG_ID_VARIANT_MASK) >> JTAG_ID_VARIANT_SHIFT;
- ret = soc_get_family(soc, name, 64);
- if (!ret) {
- printf("%s ", name);
- }
+ printf("SoC: ");
+ switch (soc) {
+ case AM65X:
+ name = "AM65x";
+ break;
+ case J721E:
+ name = "J721E";
+ break;
+ default:
+ name = "Unknown Silicon";
+ };
- ret = soc_get_revision(soc, name, 64);
- if (!ret) {
- printf("%s\n", name);
- }
+ printf("%s SR ", name);
+ switch (rev) {
+ case REV_PG1_0:
+ name = "1.0";
+ break;
+ case REV_PG2_0:
+ name = "2.0";
+ break;
+ default:
+ name = "Unknown Revision";
+ };
+ printf("%s\n", name);
return 0;
}
diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
index ba344c5bc9..94cdcb56ad 100644
--- a/arch/arm/mach-k3/common.h
+++ b/arch/arm/mach-k3/common.h
@@ -8,6 +8,12 @@
#include <asm/armv7_mpu.h>
+#define AM65X 0xbb5a
+#define J721E 0xbb64
+
+#define REV_PG1_0 0
+#define REV_PG2_0 1
+
struct fwl_data {
const char *name;
u16 fwl_id;
diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
index f2ca80af1a..0ad761418b 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -15,6 +15,7 @@
#endif
/* Assuming these addresses and definitions stay common across K3 devices */
+#define CTRLMMR_WKUP_JTAG_ID 0x43000014
#define JTAG_ID_VARIANT_SHIFT 28
#define JTAG_ID_VARIANT_MASK (0xf << 28)
#define JTAG_ID_PARTNO_SHIFT 12
diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.c b/arch/arm/mach-snapdragon/clock-snapdragon.c
index 69d65c82e3..85526186c6 100644
--- a/arch/arm/mach-snapdragon/clock-snapdragon.c
+++ b/arch/arm/mach-snapdragon/clock-snapdragon.c
@@ -114,7 +114,7 @@ static int msm_clk_probe(struct udevice *dev)
{
struct msm_clk_priv *priv = dev_get_priv(dev);
- priv->base = dev_read_addr(dev);
+ priv->base = devfdt_get_addr(dev);
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/arch/arm/mach-snapdragon/pinctrl-snapdragon.c b/arch/arm/mach-snapdragon/pinctrl-snapdragon.c
index 4c2af21308..442d236255 100644
--- a/arch/arm/mach-snapdragon/pinctrl-snapdragon.c
+++ b/arch/arm/mach-snapdragon/pinctrl-snapdragon.c
@@ -56,7 +56,7 @@ static int msm_pinctrl_probe(struct udevice *dev)
{
struct msm_pinctrl_priv *priv = dev_get_priv(dev);
- priv->base = dev_read_addr(dev);
+ priv->base = devfdt_get_addr(dev);
priv->data = (struct msm_pinctrl_data *)dev->driver_data;
return priv->base == FDT_ADDR_T_NONE ? -EINVAL : 0;
diff --git a/arch/nios2/cpu/cpu.c b/arch/nios2/cpu/cpu.c
index e7ca9882fc..7f5e731a0f 100644
--- a/arch/nios2/cpu/cpu.c
+++ b/arch/nios2/cpu/cpu.c
@@ -79,8 +79,7 @@ int arch_cpu_init_dm(void)
return 0;
}
-static int altera_nios2_get_desc(const struct udevice *dev, char *buf,
- int size)
+static int altera_nios2_get_desc(struct udevice *dev, char *buf, int size)
{
const char *cpu_name = "Nios-II";
@@ -91,8 +90,7 @@ static int altera_nios2_get_desc(const struct udevice *dev, char *buf,
return 0;
}
-static int altera_nios2_get_info(const struct udevice *dev,
- struct cpu_info *info)
+static int altera_nios2_get_info(struct udevice *dev, struct cpu_info *info)
{
info->cpu_freq = gd->cpu_clk;
info->features = (1 << CPU_FEAT_L1_CACHE) |
@@ -101,7 +99,7 @@ static int altera_nios2_get_info(const struct udevice *dev,
return 0;
}
-static int altera_nios2_get_count(const struct udevice *dev)
+static int altera_nios2_get_count(struct udevice *dev)
{
return 1;
}
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index 2ae4239721..3744a46603 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -521,10 +521,6 @@
};
};
- chipid: chipid {
- compatible = "sandbox,soc";
- };
-
i2s: i2s {
compatible = "sandbox,i2s";
#sound-dai-cells = <1>;
diff --git a/arch/x86/cpu/apollolake/cpu.c b/arch/x86/cpu/apollolake/cpu.c
index 0a6d2ad7a4..aa7a3dbd63 100644
--- a/arch/x86/cpu/apollolake/cpu.c
+++ b/arch/x86/cpu/apollolake/cpu.c
@@ -9,7 +9,7 @@
#include <asm/cpu_common.h>
#include <asm/cpu_x86.h>
-static int apl_get_info(const struct udevice *dev, struct cpu_info *info)
+static int apl_get_info(struct udevice *dev, struct cpu_info *info)
{
return cpu_intel_get_info(info, INTEL_BCLK_MHZ);
}
diff --git a/arch/x86/cpu/baytrail/cpu.c b/arch/x86/cpu/baytrail/cpu.c
index 309a50a116..18e48ffa53 100644
--- a/arch/x86/cpu/baytrail/cpu.c
+++ b/arch/x86/cpu/baytrail/cpu.c
@@ -150,7 +150,7 @@ static unsigned long tsc_freq(void)
return bclk * ((platform_info.lo >> 8) & 0xff);
}
-static int baytrail_get_info(const struct udevice *dev, struct cpu_info *info)
+static int baytrail_get_info(struct udevice *dev, struct cpu_info *info)
{
info->cpu_freq = tsc_freq();
info->features = 1 << CPU_FEAT_L1_CACHE | 1 << CPU_FEAT_MMU;
@@ -158,7 +158,7 @@ static int baytrail_get_info(const struct udevice *dev, struct cpu_info *info)
return 0;
}
-static int baytrail_get_count(const struct udevice *dev)
+static int baytrail_get_count(struct udevice *dev)
{
int ecx = 0;
diff --git a/arch/x86/cpu/broadwell/cpu_full.c b/arch/x86/cpu/broadwell/cpu_full.c
index 706f68f63d..64a1cd414f 100644
--- a/arch/x86/cpu/broadwell/cpu_full.c
+++ b/arch/x86/cpu/broadwell/cpu_full.c
@@ -626,12 +626,12 @@ void cpu_set_power_limits(int power_limit_1_time)
}
}
-static int broadwell_get_info(const struct udevice *dev, struct cpu_info *info)
+static int broadwell_get_info(struct udevice *dev, struct cpu_info *info)
{
return cpu_intel_get_info(info, INTEL_BCLK_MHZ);
}
-static int broadwell_get_count(const struct udevice *dev)
+static int broadwell_get_count(struct udevice *dev)
{
return 4;
}
diff --git a/arch/x86/cpu/cpu_x86.c b/arch/x86/cpu/cpu_x86.c
index 7e83051646..3f2ba0881e 100644
--- a/arch/x86/cpu/cpu_x86.c
+++ b/arch/x86/cpu/cpu_x86.c
@@ -26,7 +26,7 @@ int cpu_x86_bind(struct udevice *dev)
return 0;
}
-int cpu_x86_get_vendor(const struct udevice *dev, char *buf, int size)
+int cpu_x86_get_vendor(struct udevice *dev, char *buf, int size)
{
const char *vendor = cpu_vendor_name(gd->arch.x86_vendor);
@@ -38,7 +38,7 @@ int cpu_x86_get_vendor(const struct udevice *dev, char *buf, int size)
return 0;
}
-int cpu_x86_get_desc(const struct udevice *dev, char *buf, int size)
+int cpu_x86_get_desc(struct udevice *dev, char *buf, int size)
{
char *ptr;
@@ -52,7 +52,7 @@ int cpu_x86_get_desc(const struct udevice *dev, char *buf, int size)
return 0;
}
-int cpu_x86_get_count(const struct udevice *dev)
+int cpu_x86_get_count(struct udevice *dev)
{
int node, cpu;
int num = 0;
diff --git a/arch/x86/cpu/ivybridge/model_206ax.c b/arch/x86/cpu/ivybridge/model_206ax.c
index 55f7cc2b2e..5954a24873 100644
--- a/arch/x86/cpu/ivybridge/model_206ax.c
+++ b/arch/x86/cpu/ivybridge/model_206ax.c
@@ -410,15 +410,14 @@ static int model_206ax_init(struct udevice *dev)
return 0;
}
-static int model_206ax_get_info(const struct udevice *dev,
- struct cpu_info *info)
+static int model_206ax_get_info(struct udevice *dev, struct cpu_info *info)
{
return cpu_intel_get_info(info, INTEL_BCLK_MHZ);
return 0;
}
-static int model_206ax_get_count(const struct udevice *dev)
+static int model_206ax_get_count(struct udevice *dev)
{
return 4;
}
diff --git a/arch/x86/cpu/qemu/cpu.c b/arch/x86/cpu/qemu/cpu.c
index 9ce86b379c..f40fb4d087 100644
--- a/arch/x86/cpu/qemu/cpu.c
+++ b/arch/x86/cpu/qemu/cpu.c
@@ -10,7 +10,7 @@
#include <qfw.h>
#include <asm/cpu.h>
-int cpu_qemu_get_desc(const struct udevice *dev, char *buf, int size)
+int cpu_qemu_get_desc(struct udevice *dev, char *buf, int size)
{
if (size < CPU_MAX_NAME_LEN)
return -ENOSPC;
@@ -20,7 +20,7 @@ int cpu_qemu_get_desc(const struct udevice *dev, char *buf, int size)
return 0;
}
-static int cpu_qemu_get_count(const struct udevice *dev)
+static int cpu_qemu_get_count(struct udevice *dev)
{
return qemu_fwcfg_online_cpus();
}
diff --git a/arch/x86/include/asm/cpu_x86.h b/arch/x86/include/asm/cpu_x86.h
index 4fd5f03fdc..ae8f4dcd5d 100644
--- a/arch/x86/include/asm/cpu_x86.h
+++ b/arch/x86/include/asm/cpu_x86.h
@@ -28,7 +28,7 @@ int cpu_x86_bind(struct udevice *dev);
* @size: Size of string space
* @return: 0 if OK, -ENOSPC if buffer is too small, other -ve on error
*/
-int cpu_x86_get_desc(const struct udevice *dev, char *buf, int size);
+int cpu_x86_get_desc(struct udevice *dev, char *buf, int size);
/**
* cpu_x86_get_count() - Get the number of cores for an x86 CPU
@@ -40,7 +40,7 @@ int cpu_x86_get_desc(const struct udevice *dev, char *buf, int size);
* @return: Number of cores if successful,
* -ENOENT if not "/cpus" entry is found in the device tree
*/
-int cpu_x86_get_count(const struct udevice *dev);
+int cpu_x86_get_count(struct udevice *dev);
/**
* cpu_x86_get_vendor() - Get a vendor string for an x86 CPU
@@ -53,6 +53,6 @@ int cpu_x86_get_count(const struct udevice *dev);
* @size: Size of string space
* @return: 0 if OK, -ENOSPC if buffer is too small, other -ve on error
*/
-int cpu_x86_get_vendor(const struct udevice *dev, char *buf, int size);
+int cpu_x86_get_vendor(struct udevice *dev, char *buf, int size);
#endif /* _ASM_CPU_X86_H */
diff --git a/board/renesas/rcar-common/common.c b/board/renesas/rcar-common/common.c
index 83dd288847..9f50f36982 100644
--- a/board/renesas/rcar-common/common.c
+++ b/board/renesas/rcar-common/common.c
@@ -33,12 +33,12 @@ int fdtdec_board_setup(const void *fdt_blob)
int dram_init(void)
{
- return fdtdec_setup_mem_size_base();
+ return fdtdec_setup_mem_size_base_fdt(gd->fdt_blob);
}
int dram_init_banksize(void)
{
- fdtdec_setup_memory_banksize();
+ fdtdec_setup_memory_banksize_fdt(gd->fdt_blob);
return 0;
}
diff --git a/common/fdt_region.c b/common/fdt_region.c
index ff12c518e9..667659054a 100644
--- a/common/fdt_region.c
+++ b/common/fdt_region.c
@@ -65,8 +65,6 @@ int fdt_find_regions(const void *fdt, char * const inc[], int inc_count,
stop_at = offset;
prop = fdt_get_property_by_offset(fdt, offset, NULL);
str = fdt_string(fdt, fdt32_to_cpu(prop->nameoff));
- if (!str)
- return -FDT_ERR_BADSTRUCTURE;
if (str_in_list(str, exc_prop, exc_prop_count))
include = 0;
break;
diff --git a/common/fdt_support.c b/common/fdt_support.c
index a565b470f8..3778de5368 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -816,8 +816,8 @@ static int fdt_del_partitions(void *blob, int parent_offset)
return 0;
}
-static int fdt_node_set_part_info(void *blob, int parent_offset,
- struct mtd_device *dev)
+int fdt_node_set_part_info(void *blob, int parent_offset,
+ struct mtd_device *dev)
{
struct list_head *pentry;
struct part_info *part;
@@ -951,35 +951,27 @@ void fdt_fixup_mtdparts(void *blob, const struct node_info *node_info,
struct mtd_device *dev;
int i, idx;
int noff;
- bool inited = false;
+
+ if (mtdparts_init() != 0)
+ return;
for (i = 0; i < node_info_size; i++) {
idx = 0;
- noff = -1;
-
- while ((noff = fdt_node_offset_by_compatible(blob, noff,
- node_info[i].compat)) >= 0) {
- const char *prop;
-
- prop = fdt_getprop(blob, noff, "status", NULL);
- if (prop && !strcmp(prop, "disabled"))
- continue;
-
+ noff = fdt_node_offset_by_compatible(blob, -1,
+ node_info[i].compat);
+ while (noff != -FDT_ERR_NOTFOUND) {
debug("%s: %s, mtd dev type %d\n",
fdt_get_name(blob, noff, 0),
node_info[i].compat, node_info[i].type);
-
- if (!inited) {
- if (mtdparts_init() != 0)
- return;
- inited = true;
- }
-
dev = device_find(node_info[i].type, idx++);
if (dev) {
if (fdt_node_set_part_info(blob, noff, dev))
return; /* return on error */
}
+
+ /* Jump to next flash node */
+ noff = fdt_node_offset_by_compatible(blob, noff,
+ node_info[i].compat);
}
}
}
diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig
index e8f0adbec2..918ff4de0c 100644
--- a/configs/am65x_evm_a53_defconfig
+++ b/configs/am65x_evm_a53_defconfig
@@ -146,5 +146,3 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6162
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig
index 81ef413162..09c8b74aee 100644
--- a/configs/am65x_evm_r5_defconfig
+++ b/configs/am65x_evm_r5_defconfig
@@ -120,5 +120,3 @@ CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_OMAP_TIMER=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig
index b58381eb25..bc3da74509 100644
--- a/configs/am65x_hs_evm_a53_defconfig
+++ b/configs/am65x_hs_evm_a53_defconfig
@@ -148,5 +148,3 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6162
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
diff --git a/configs/am65x_hs_evm_r5_defconfig b/configs/am65x_hs_evm_r5_defconfig
index e24311aea6..ead4a59c38 100644
--- a/configs/am65x_hs_evm_r5_defconfig
+++ b/configs/am65x_hs_evm_r5_defconfig
@@ -121,5 +121,3 @@ CONFIG_TIMER=y
CONFIG_SPL_TIMER=y
CONFIG_OMAP_TIMER=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig
index e85abee695..09a73e590d 100644
--- a/configs/j721e_evm_a72_defconfig
+++ b/configs/j721e_evm_a72_defconfig
@@ -170,5 +170,3 @@ CONFIG_CADENCE_UFS=y
CONFIG_TI_J721E_UFS=y
CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig
index 488dae2bb3..a06fc7c3d2 100644
--- a/configs/j721e_evm_r5_defconfig
+++ b/configs/j721e_evm_r5_defconfig
@@ -135,5 +135,3 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x6163
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_FS_EXT4=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
diff --git a/configs/j721e_hs_evm_a72_defconfig b/configs/j721e_hs_evm_a72_defconfig
index fa928873dc..9b5bc6cf54 100644
--- a/configs/j721e_hs_evm_a72_defconfig
+++ b/configs/j721e_hs_evm_a72_defconfig
@@ -158,5 +158,3 @@ CONFIG_CADENCE_UFS=y
CONFIG_TI_J721E_UFS=y
CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT_OVERLAY=y
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
diff --git a/configs/j721e_hs_evm_r5_defconfig b/configs/j721e_hs_evm_r5_defconfig
index c8773aa6d0..1aa899e63c 100644
--- a/configs/j721e_hs_evm_r5_defconfig
+++ b/configs/j721e_hs_evm_r5_defconfig
@@ -116,5 +116,3 @@ CONFIG_SPL_TIMER=y
CONFIG_OMAP_TIMER=y
CONFIG_FS_EXT4=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
-CONFIG_SOC_DEVICE=y
-CONFIG_SOC_DEVICE_TI_K3=y
diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
index a3b7ff444f..dcf2f44b58 100644
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@@ -118,7 +118,6 @@ CONFIG_LED_GPIO=y
CONFIG_DM_MAILBOX=y
CONFIG_SANDBOX_MBOX=y
CONFIG_MISC=y
-CONFIG_SOC_DEVICE=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_LPC=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 17c9b332f5..6059d668af 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -139,7 +139,6 @@ CONFIG_LED_GPIO=y
CONFIG_DM_MAILBOX=y
CONFIG_SANDBOX_MBOX=y
CONFIG_MISC=y
-CONFIG_SOC_DEVICE=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_LPC=y
diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
index 93ab210ebb..4158b9b86d 100644
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@@ -103,7 +103,6 @@ CONFIG_LED_GPIO=y
CONFIG_DM_MAILBOX=y
CONFIG_SANDBOX_MBOX=y
CONFIG_MISC=y
-CONFIG_SOC_DEVICE=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_LPC=y
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index 25c974f6fe..b3274a93b4 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -120,7 +120,6 @@ CONFIG_LED_GPIO=y
CONFIG_DM_MAILBOX=y
CONFIG_SANDBOX_MBOX=y
CONFIG_MISC=y
-CONFIG_SOC_DEVICE=y
CONFIG_CROS_EC=y
CONFIG_CROS_EC_I2C=y
CONFIG_CROS_EC_LPC=y
diff --git a/doc/driver-model/index.rst b/doc/driver-model/index.rst
index f17c72ce69..b9df221627 100644
--- a/doc/driver-model/index.rst
+++ b/doc/driver-model/index.rst
@@ -19,6 +19,5 @@ Driver Model
pmic-framework
remoteproc-framework
serial-howto
- soc-framework
spi-howto
usb-info
diff --git a/doc/driver-model/soc-framework.rst b/doc/driver-model/soc-framework.rst
deleted file mode 100644
index 2609fda644..0000000000
--- a/doc/driver-model/soc-framework.rst
+++ /dev/null
@@ -1,68 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-.. (C) Copyright 2020
-.. Texas Instruments Incorporated - http://www.ti.com/
-
-SOC ID Framework
-================
-
-Introduction
-------------
-
-The driver-model SOC ID framework is able to provide identification
-information about a specific SoC in use at runtime, and also provide matching
-from a set of identification information from an array. This can be useful for
-enabling small quirks in drivers that exist between SoC variants that are
-impractical to implement using device tree flags. It is based on UCLASS_SOC.
-
-UCLASS_SOC:
- - drivers/soc/soc-uclass.c
- - include/soc.h
-
-Configuration:
- - CONFIG_SOC_DEVICE is selected by drivers as needed.
-
-Implementing a UCLASS_SOC provider
-----------------------------------
-
-The purpose of this framework is to allow UCLASS_SOC provider drivers to supply
-identification information about the SoC in use at runtime. The framework
-allows drivers to define soc_ops that return identification strings. All
-soc_ops need not be defined and can be left as NULL, in which case the
-framework will return -ENOSYS and not consider the value when doing an
-soc_device_match.
-
-It is left to the driver implementor to decide how the information returned is
-determined, but in general the same SOC should always return the same set of
-identifying information. Information returned must be in the form of a NULL
-terminated string.
-
-See include/soc.h for documentation of the available soc_ops and the intended
-meaning of the values that can be returned. See drivers/soc/soc_sandbox.c for
-an example UCLASS_SOC provider driver.
-
-Using a UCLASS_SOC driver
--------------------------
-
-The framework provides the ability to retrieve and use the identification
-strings directly. It also has the ability to return a match from a list of
-different sets of SoC data using soc_device_match.
-
-An array of 'struct soc_attr' can be defined, each containing ID information
-for a specific SoC, and when passed to soc_device_match, the identifier values
-for each entry in the list will be compared against the values provided by the
-UCLASS_SOC driver that is in use. The first entry in the list that matches all
-non-null values will be returned by soc_device_match.
-
-An example of various uses of the framework can be found at test/dm/soc.c.
-
-Describing the device using device tree
----------------------------------------
-
-.. code-block:: none
-
- chipid: chipid {
- compatible = "sandbox,soc";
- };
-
-All that is required in a DT node is a compatible for a corresponding
-UCLASS_SOC driver.
diff --git a/doc/mkimage.1 b/doc/mkimage.1
index fea5288784..3dcdcedcef 100644
--- a/doc/mkimage.1
+++ b/doc/mkimage.1
@@ -167,15 +167,6 @@ Specifies that keys used to sign the FIT are required. This means that they
must be verified for the image to boot. Without this option, the verification
will be optional (useful for testing but not for release).
-.TP
-.BI "\-t
-Update the timestamp in the FIT.
-
-Normally the FIT timestamp is created the first time mkimage is run on a FIT,
-when converting the source .its to the binary .fit file. This corresponds to
-using the -f flag. But if the original input to mkimage is a binary file
-(already compiled) then the timestamp is assumed to have been set previously.
-
.SH EXAMPLES
List image information:
diff --git a/drivers/adc/exynos-adc.c b/drivers/adc/exynos-adc.c
index b459b57050..12c49fc8ce 100644
--- a/drivers/adc/exynos-adc.c
+++ b/drivers/adc/exynos-adc.c
@@ -106,7 +106,7 @@ int exynos_adc_ofdata_to_platdata(struct udevice *dev)
struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev);
struct exynos_adc_priv *priv = dev_get_priv(dev);
- priv->regs = dev_read_addr_ptr(dev);
+ priv->regs = (struct exynos_adc_v2 *)devfdt_get_addr(dev);
if (priv->regs == (struct exynos_adc_v2 *)FDT_ADDR_T_NONE) {
pr_err("Dev: %s - can't get address!", dev->name);
return -ENODATA;
diff --git a/drivers/ata/dwc_ahci.c b/drivers/ata/dwc_ahci.c
index 825fe57f85..017650ae46 100644
--- a/drivers/ata/dwc_ahci.c
+++ b/drivers/ata/dwc_ahci.c
@@ -34,7 +34,7 @@ static int dwc_ahci_ofdata_to_platdata(struct udevice *dev)
struct dwc_ahci_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
- priv->base = map_physmem(dev_read_addr(dev), sizeof(void *),
+ priv->base = map_physmem(devfdt_get_addr(dev), sizeof(void *),
MAP_NOCACHE);
addr = devfdt_get_addr_index(dev, 1);
diff --git a/drivers/clk/altera/clk-agilex.c b/drivers/clk/altera/clk-agilex.c
index 9927ada201..0042958f4c 100644
--- a/drivers/clk/altera/clk-agilex.c
+++ b/drivers/clk/altera/clk-agilex.c
@@ -553,7 +553,7 @@ static int socfpga_clk_ofdata_to_platdata(struct udevice *dev)
struct socfpga_clk_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->regs = (void __iomem *)addr;
diff --git a/drivers/clk/altera/clk-arria10.c b/drivers/clk/altera/clk-arria10.c
index 732ed4d79b..ede0be299d 100644
--- a/drivers/clk/altera/clk-arria10.c
+++ b/drivers/clk/altera/clk-arria10.c
@@ -285,7 +285,7 @@ static int socfpga_a10_clk_probe(struct udevice *dev)
socfpga_a10_handoff_workaround(dev);
if (!fdt_node_check_compatible(fdt, offset, "altr,clk-mgr")) {
- plat->regs = dev_read_addr(dev);
+ plat->regs = devfdt_get_addr(dev);
} else {
pdev = dev_get_parent(dev);
if (!pdev)
diff --git a/drivers/clk/exynos/clk-exynos7420.c b/drivers/clk/exynos/clk-exynos7420.c
index 4a023ea736..aa86c7ca44 100644
--- a/drivers/clk/exynos/clk-exynos7420.c
+++ b/drivers/clk/exynos/clk-exynos7420.c
@@ -95,7 +95,7 @@ static int exynos7420_clk_topc_probe(struct udevice *dev)
fdt_addr_t base;
int ret;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
@@ -149,7 +149,7 @@ static int exynos7420_clk_top0_probe(struct udevice *dev)
if (!priv)
return -EINVAL;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/clk/renesas/clk-rcar-gen2.c b/drivers/clk/renesas/clk-rcar-gen2.c
index 16da10c8dd..3ed0aa92cb 100644
--- a/drivers/clk/renesas/clk-rcar-gen2.c
+++ b/drivers/clk/renesas/clk-rcar-gen2.c
@@ -283,7 +283,7 @@ int gen2_clk_probe(struct udevice *dev)
u32 cpg_mode;
int ret;
- priv->base = dev_read_addr_ptr(dev);
+ priv->base = (struct gen2_base *)devfdt_get_addr(dev);
if (!priv->base)
return -EINVAL;
diff --git a/drivers/clk/renesas/clk-rcar-gen3.c b/drivers/clk/renesas/clk-rcar-gen3.c
index 30a101fe86..15e3833756 100644
--- a/drivers/clk/renesas/clk-rcar-gen3.c
+++ b/drivers/clk/renesas/clk-rcar-gen3.c
@@ -359,7 +359,7 @@ int gen3_clk_probe(struct udevice *dev)
u32 cpg_mode;
int ret;
- priv->base = dev_read_addr_ptr(dev);
+ priv->base = (struct gen3_base *)devfdt_get_addr(dev);
if (!priv->base)
return -EINVAL;
diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c
index 4e25db354e..c9ec523080 100644
--- a/drivers/clk/uniphier/clk-uniphier-core.c
+++ b/drivers/clk/uniphier/clk-uniphier-core.c
@@ -253,7 +253,7 @@ static int uniphier_clk_probe(struct udevice *dev)
struct uniphier_clk_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev->parent);
+ addr = devfdt_get_addr(dev->parent);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/core/device.c b/drivers/core/device.c
index 355dbd147a..476133f172 100644
--- a/drivers/core/device.c
+++ b/drivers/core/device.c
@@ -82,8 +82,7 @@ static int device_bind_common(struct udevice *parent, const struct driver *drv,
* This is just a 'requested' sequence, and will be
* resolved (and ->seq updated) when the device is probed.
*/
- if (CONFIG_IS_ENABLED(OF_CONTROL) &&
- !CONFIG_IS_ENABLED(OF_PLATDATA)) {
+ if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
if (uc->uc_drv->name && ofnode_valid(node))
dev_read_alias_seq(dev, &dev->req_seq);
#if CONFIG_IS_ENABLED(OF_PRIOR_STAGE)
diff --git a/drivers/cpu/bmips_cpu.c b/drivers/cpu/bmips_cpu.c
index 421cc7a9a4..2649c5c6e9 100644
--- a/drivers/cpu/bmips_cpu.c
+++ b/drivers/cpu/bmips_cpu.c
@@ -379,7 +379,7 @@ static const struct bmips_cpu_hw bmips_cpu_bcm6838 = {
};
/* Generic CPU Ops */
-static int bmips_cpu_get_desc(const struct udevice *dev, char *buf, int size)
+static int bmips_cpu_get_desc(struct udevice *dev, char *buf, int size)
{
struct bmips_cpu_priv *priv = dev_get_priv(dev);
const struct bmips_cpu_hw *hw = priv->hw;
@@ -387,7 +387,7 @@ static int bmips_cpu_get_desc(const struct udevice *dev, char *buf, int size)
return hw->get_cpu_desc(priv, buf, size);
}
-static int bmips_cpu_get_info(const struct udevice *dev, struct cpu_info *info)
+static int bmips_cpu_get_info(struct udevice *dev, struct cpu_info *info)
{
struct bmips_cpu_priv *priv = dev_get_priv(dev);
const struct bmips_cpu_hw *hw = priv->hw;
@@ -400,7 +400,7 @@ static int bmips_cpu_get_info(const struct udevice *dev, struct cpu_info *info)
return 0;
}
-static int bmips_cpu_get_count(const struct udevice *dev)
+static int bmips_cpu_get_count(struct udevice *dev)
{
struct bmips_cpu_priv *priv = dev_get_priv(dev);
const struct bmips_cpu_hw *hw = priv->hw;
@@ -408,7 +408,7 @@ static int bmips_cpu_get_count(const struct udevice *dev)
return hw->get_cpu_count(priv);
}
-static int bmips_cpu_get_vendor(const struct udevice *dev, char *buf, int size)
+static int bmips_cpu_get_vendor(struct udevice *dev, char *buf, int size)
{
snprintf(buf, size, "Broadcom");
diff --git a/drivers/cpu/cpu-uclass.c b/drivers/cpu/cpu-uclass.c
index 37e3cf2d8f..cbb4419ec0 100644
--- a/drivers/cpu/cpu-uclass.c
+++ b/drivers/cpu/cpu-uclass.c
@@ -69,7 +69,7 @@ struct udevice *cpu_get_current_dev(void)
return cpu;
}
-int cpu_get_desc(const struct udevice *dev, char *buf, int size)
+int cpu_get_desc(struct udevice *dev, char *buf, int size)
{
struct cpu_ops *ops = cpu_get_ops(dev);
@@ -79,7 +79,7 @@ int cpu_get_desc(const struct udevice *dev, char *buf, int size)
return ops->get_desc(dev, buf, size);
}
-int cpu_get_info(const struct udevice *dev, struct cpu_info *info)
+int cpu_get_info(struct udevice *dev, struct cpu_info *info)
{
struct cpu_ops *ops = cpu_get_ops(dev);
@@ -92,7 +92,7 @@ int cpu_get_info(const struct udevice *dev, struct cpu_info *info)
return ops->get_info(dev, info);
}
-int cpu_get_count(const struct udevice *dev)
+int cpu_get_count(struct udevice *dev)
{
struct cpu_ops *ops = cpu_get_ops(dev);
@@ -102,7 +102,7 @@ int cpu_get_count(const struct udevice *dev)
return ops->get_count(dev);
}
-int cpu_get_vendor(const struct udevice *dev, char *buf, int size)
+int cpu_get_vendor(struct udevice *dev, char *buf, int size)
{
struct cpu_ops *ops = cpu_get_ops(dev);
diff --git a/drivers/cpu/cpu_sandbox.c b/drivers/cpu/cpu_sandbox.c
index caa26e50f2..30a12e5a53 100644
--- a/drivers/cpu/cpu_sandbox.c
+++ b/drivers/cpu/cpu_sandbox.c
@@ -8,14 +8,14 @@
#include <dm.h>
#include <cpu.h>
-int cpu_sandbox_get_desc(const struct udevice *dev, char *buf, int size)
+int cpu_sandbox_get_desc(struct udevice *dev, char *buf, int size)
{
snprintf(buf, size, "LEG Inc. SuperMegaUltraTurbo CPU No. 1");
return 0;
}
-int cpu_sandbox_get_info(const struct udevice *dev, struct cpu_info *info)
+int cpu_sandbox_get_info(struct udevice *dev, struct cpu_info *info)
{
info->cpu_freq = 42 * 42 * 42 * 42 * 42;
info->features = 0x42424242;
@@ -24,12 +24,12 @@ int cpu_sandbox_get_info(const struct udevice *dev, struct cpu_info *info)
return 0;
}
-int cpu_sandbox_get_count(const struct udevice *dev)
+int cpu_sandbox_get_count(struct udevice *dev)
{
return 42;
}
-int cpu_sandbox_get_vendor(const struct udevice *dev, char *buf, int size)
+int cpu_sandbox_get_vendor(struct udevice *dev, char *buf, int size)
{
snprintf(buf, size, "Languid Example Garbage Inc.");
diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c
index 502c8ebb43..6345cd0815 100644
--- a/drivers/cpu/imx8_cpu.c
+++ b/drivers/cpu/imx8_cpu.c
@@ -100,7 +100,7 @@ static int cpu_imx_get_temp(struct cpu_imx_platdata *plat)
}
#endif
-int cpu_imx_get_desc(const struct udevice *dev, char *buf, int size)
+int cpu_imx_get_desc(struct udevice *dev, char *buf, int size)
{
struct cpu_imx_platdata *plat = dev_get_platdata(dev);
int ret, temp;
@@ -126,7 +126,7 @@ int cpu_imx_get_desc(const struct udevice *dev, char *buf, int size)
return 0;
}
-static int cpu_imx_get_info(const struct udevice *dev, struct cpu_info *info)
+static int cpu_imx_get_info(struct udevice *dev, struct cpu_info *info)
{
struct cpu_imx_platdata *plat = dev_get_platdata(dev);
@@ -135,7 +135,7 @@ static int cpu_imx_get_info(const struct udevice *dev, struct cpu_info *info)
return 0;
}
-static int cpu_imx_get_count(const struct udevice *dev)
+static int cpu_imx_get_count(struct udevice *dev)
{
ofnode node;
int num = 0;
@@ -157,7 +157,7 @@ static int cpu_imx_get_count(const struct udevice *dev)
return num;
}
-static int cpu_imx_get_vendor(const struct udevice *dev, char *buf, int size)
+static int cpu_imx_get_vendor(struct udevice *dev, char *buf, int size)
{
snprintf(buf, size, "NXP");
return 0;
diff --git a/drivers/cpu/mpc83xx_cpu.c b/drivers/cpu/mpc83xx_cpu.c
index 5f1592f9ad..f8a84bae9d 100644
--- a/drivers/cpu/mpc83xx_cpu.c
+++ b/drivers/cpu/mpc83xx_cpu.c
@@ -60,7 +60,7 @@ static inline u32 get_spridr(void)
* determine_type() - Determine CPU family of MPC83xx device
* @dev: CPU device from which to read CPU family from
*/
-static inline void determine_family(const struct udevice *dev)
+static inline void determine_family(struct udevice *dev)
{
struct mpc83xx_cpu_priv *priv = dev_get_priv(dev);
/* Upper 12 bits of PARTID field (bits 0-23 in SPRIDR) */
@@ -95,7 +95,7 @@ static inline void determine_family(const struct udevice *dev)
* determine_type() - Determine CPU type of MPC83xx device
* @dev: CPU device from which to read CPU type from
*/
-static inline void determine_type(const struct udevice *dev)
+static inline void determine_type(struct udevice *dev)
{
struct mpc83xx_cpu_priv *priv = dev_get_priv(dev);
/* Upper 16 bits of PVR (Processor Version Register) */
@@ -169,7 +169,7 @@ static inline void determine_type(const struct udevice *dev)
* determine_e300_type() - Determine e300 core type of MPC83xx device
* @dev: CPU device from which to read e300 core type from
*/
-static inline void determine_e300_type(const struct udevice *dev)
+static inline void determine_e300_type(struct udevice *dev)
{
struct mpc83xx_cpu_priv *priv = dev_get_priv(dev);
/* Upper 16 bits of PVR (Processor Version Register) */
@@ -198,7 +198,7 @@ static inline void determine_e300_type(const struct udevice *dev)
* determine_revid() - Determine revision ID of CPU device
* @dev: CPU device from which to read revision ID
*/
-static inline void determine_revid(const struct udevice *dev)
+static inline void determine_revid(struct udevice *dev)
{
struct mpc83xx_cpu_priv *priv = dev_get_priv(dev);
u32 REVID_MAJOR_MASK;
@@ -221,7 +221,7 @@ static inline void determine_revid(const struct udevice *dev)
* determine_cpu_data() - Determine CPU information from hardware
* @dev: CPU device from which to read information
*/
-static void determine_cpu_data(const struct udevice *dev)
+static void determine_cpu_data(struct udevice *dev)
{
struct mpc83xx_cpu_priv *priv = dev_get_priv(dev);
const u32 E_FLAG_MASK = 0x00010000;
@@ -239,7 +239,7 @@ static void determine_cpu_data(const struct udevice *dev)
priv->is_e_processor = !bitfield_extract_by_mask(spridr, E_FLAG_MASK);
}
-static int mpc83xx_cpu_get_desc(const struct udevice *dev, char *buf, int size)
+static int mpc83xx_cpu_get_desc(struct udevice *dev, char *buf, int size)
{
struct mpc83xx_cpu_priv *priv = dev_get_priv(dev);
struct clk core_clk;
@@ -248,14 +248,14 @@ static int mpc83xx_cpu_get_desc(const struct udevice *dev, char *buf, int size)
char csb_freq[32];
int ret;
- ret = clk_get_by_index((struct udevice *)dev, 0, &core_clk);
+ ret = clk_get_by_index(dev, 0, &core_clk);
if (ret) {
debug("%s: Failed to get core clock (err = %d)\n",
dev->name, ret);
return ret;
}
- ret = clk_get_by_index((struct udevice *)dev, 1, &csb_clk);
+ ret = clk_get_by_index(dev, 1, &csb_clk);
if (ret) {
debug("%s: Failed to get CSB clock (err = %d)\n",
dev->name, ret);
@@ -278,14 +278,13 @@ static int mpc83xx_cpu_get_desc(const struct udevice *dev, char *buf, int size)
return 0;
}
-static int mpc83xx_cpu_get_info(const struct udevice *dev,
- struct cpu_info *info)
+static int mpc83xx_cpu_get_info(struct udevice *dev, struct cpu_info *info)
{
struct clk clock;
int ret;
ulong freq;
- ret = clk_get_by_index((struct udevice *)dev, 0, &clock);
+ ret = clk_get_by_index(dev, 0, &clock);
if (ret) {
debug("%s: Failed to get core clock (err = %d)\n",
dev->name, ret);
@@ -304,14 +303,13 @@ static int mpc83xx_cpu_get_info(const struct udevice *dev,
return 0;
}
-static int mpc83xx_cpu_get_count(const struct udevice *dev)
+static int mpc83xx_cpu_get_count(struct udevice *dev)
{
/* We have one e300cX core */
return 1;
}
-static int mpc83xx_cpu_get_vendor(const struct udevice *dev, char *buf,
- int size)
+static int mpc83xx_cpu_get_vendor(struct udevice *dev, char *buf, int size)
{
snprintf(buf, size, "NXP");
diff --git a/drivers/cpu/riscv_cpu.c b/drivers/cpu/riscv_cpu.c
index 93ce708f65..100fe5542e 100644
--- a/drivers/cpu/riscv_cpu.c
+++ b/drivers/cpu/riscv_cpu.c
@@ -17,7 +17,7 @@
DECLARE_GLOBAL_DATA_PTR;
-static int riscv_cpu_get_desc(const struct udevice *dev, char *buf, int size)
+static int riscv_cpu_get_desc(struct udevice *dev, char *buf, int size)
{
const char *isa;
@@ -30,7 +30,7 @@ static int riscv_cpu_get_desc(const struct udevice *dev, char *buf, int size)
return 0;
}
-static int riscv_cpu_get_info(const struct udevice *dev, struct cpu_info *info)
+static int riscv_cpu_get_info(struct udevice *dev, struct cpu_info *info)
{
int ret;
struct clk clk;
@@ -39,7 +39,7 @@ static int riscv_cpu_get_info(const struct udevice *dev, struct cpu_info *info)
u32 d_cache_size;
/* First try getting the frequency from the assigned clock */
- ret = clk_get_by_index((struct udevice *)dev, 0, &clk);
+ ret = clk_get_by_index(dev, 0, &clk);
if (!ret) {
ret = clk_get_rate(&clk);
if (!IS_ERR_VALUE(ret))
@@ -67,7 +67,7 @@ static int riscv_cpu_get_info(const struct udevice *dev, struct cpu_info *info)
return 0;
}
-static int riscv_cpu_get_count(const struct udevice *dev)
+static int riscv_cpu_get_count(struct udevice *dev)
{
ofnode node;
int num = 0;
diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c
index 13ab967089..77c4ba9530 100644
--- a/drivers/dma/ti-edma3.c
+++ b/drivers/dma/ti-edma3.c
@@ -546,7 +546,7 @@ static int ti_edma3_ofdata_to_platdata(struct udevice *dev)
{
struct ti_edma3_priv *priv = dev_get_priv(dev);
- priv->base = dev_read_addr(dev);
+ priv->base = devfdt_get_addr(dev);
return 0;
}
diff --git a/drivers/gpio/altera_pio.c b/drivers/gpio/altera_pio.c
index 75800d9f31..324f9c29a8 100644
--- a/drivers/gpio/altera_pio.c
+++ b/drivers/gpio/altera_pio.c
@@ -88,7 +88,7 @@ static int altera_pio_ofdata_to_platdata(struct udevice *dev)
{
struct altera_pio_platdata *plat = dev_get_platdata(dev);
- plat->regs = map_physmem(dev_read_addr(dev),
+ plat->regs = map_physmem(devfdt_get_addr(dev),
sizeof(struct altera_pio_regs),
MAP_NOCACHE);
plat->gpio_count = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
diff --git a/drivers/gpio/atmel_pio4.c b/drivers/gpio/atmel_pio4.c
index 18f365fa41..455944d547 100644
--- a/drivers/gpio/atmel_pio4.c
+++ b/drivers/gpio/atmel_pio4.c
@@ -299,7 +299,7 @@ static int atmel_pio4_probe(struct udevice *dev)
clk_free(&clk);
- addr_base = dev_read_addr(dev);
+ addr_base = devfdt_get_addr(dev);
if (addr_base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/gpio/bcm2835_gpio.c b/drivers/gpio/bcm2835_gpio.c
index 0dff9ac711..f4b67f1cf0 100644
--- a/drivers/gpio/bcm2835_gpio.c
+++ b/drivers/gpio/bcm2835_gpio.c
@@ -121,7 +121,7 @@ static int bcm2835_gpio_ofdata_to_platdata(struct udevice *dev)
struct bcm2835_gpio_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/gpio/da8xx_gpio.c b/drivers/gpio/da8xx_gpio.c
index f875888510..ab0a5cfd33 100644
--- a/drivers/gpio/da8xx_gpio.c
+++ b/drivers/gpio/da8xx_gpio.c
@@ -545,7 +545,7 @@ static int davinci_gpio_ofdata_to_platdata(struct udevice *dev)
struct davinci_gpio_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index a993fd4d70..c49a041059 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -148,7 +148,7 @@ static int rcar_gpio_probe(struct udevice *dev)
int node = dev_of_offset(dev);
int ret;
- priv->regs = dev_read_addr_ptr(dev);
+ priv->regs = (void __iomem *)devfdt_get_addr(dev);
uc_priv->bank_name = dev->name;
ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, node, "gpio-ranges",
diff --git a/drivers/gpio/gpio-rza1.c b/drivers/gpio/gpio-rza1.c
index 86804ac2f5..21a87d645c 100644
--- a/drivers/gpio/gpio-rza1.c
+++ b/drivers/gpio/gpio-rza1.c
@@ -112,7 +112,7 @@ static int r7s72100_gpio_probe(struct udevice *dev)
uc_priv->bank_name = dev->name;
dev = dev_get_parent(dev);
- addr_base = dev_read_addr(dev);
+ addr_base = devfdt_get_addr(dev);
if (addr_base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 54a38da0f1..30392bccaa 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -142,7 +142,7 @@ static int uniphier_gpio_probe(struct udevice *dev)
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/gpio/msm_gpio.c b/drivers/gpio/msm_gpio.c
index fe6b33e1df..ac5d20c1b9 100644
--- a/drivers/gpio/msm_gpio.c
+++ b/drivers/gpio/msm_gpio.c
@@ -96,7 +96,7 @@ static int msm_gpio_probe(struct udevice *dev)
{
struct msm_gpio_bank *priv = dev_get_priv(dev);
- priv->base = dev_read_addr(dev);
+ priv->base = devfdt_get_addr(dev);
return priv->base == FDT_ADDR_T_NONE ? -EINVAL : 0;
}
diff --git a/drivers/gpio/mvebu_gpio.c b/drivers/gpio/mvebu_gpio.c
index 65eaa71c20..770cbf6b60 100644
--- a/drivers/gpio/mvebu_gpio.c
+++ b/drivers/gpio/mvebu_gpio.c
@@ -90,7 +90,7 @@ static int mvebu_gpio_probe(struct udevice *dev)
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
struct mvebu_gpio_priv *priv = dev_get_priv(dev);
- priv->regs = dev_read_addr_ptr(dev);
+ priv->regs = (struct mvebu_gpio_regs *)devfdt_get_addr(dev);
uc_priv->gpio_count = MVEBU_GPIOS_PER_BANK;
priv->name[0] = 'A' + dev->req_seq;
uc_priv->bank_name = priv->name;
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index a16f5719ed..90d36fb87b 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -300,7 +300,7 @@ static int mxc_gpio_ofdata_to_platdata(struct udevice *dev)
fdt_addr_t addr;
struct mxc_gpio_plat *plat = dev_get_platdata(dev);
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/gpio/mxs_gpio.c b/drivers/gpio/mxs_gpio.c
index 2c16517e72..cb797261b7 100644
--- a/drivers/gpio/mxs_gpio.c
+++ b/drivers/gpio/mxs_gpio.c
@@ -275,7 +275,7 @@ static int mxs_ofdata_to_platdata(struct udevice *dev)
int node = dev_of_offset(dev);
int ret;
- plat->bank = dev_read_addr(dev);
+ plat->bank = devfdt_get_addr(dev);
if (plat->bank == FDT_ADDR_T_NONE) {
printf("%s: No 'reg' property defined!\n", __func__);
return -EINVAL;
diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c
index 6eaa0a08a2..c986ef0380 100644
--- a/drivers/gpio/omap_gpio.c
+++ b/drivers/gpio/omap_gpio.c
@@ -308,7 +308,7 @@ static int omap_gpio_bind(struct udevice *dev)
if (plat)
return 0;
- base_addr = dev_read_addr(dev);
+ base_addr = devfdt_get_addr(dev);
if (base_addr == FDT_ADDR_T_NONE)
return -EINVAL;
@@ -347,7 +347,7 @@ static int omap_gpio_ofdata_to_platdata(struct udevice *dev)
struct omap_gpio_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/gpio/pm8916_gpio.c b/drivers/gpio/pm8916_gpio.c
index 58f044678b..51df5367ea 100644
--- a/drivers/gpio/pm8916_gpio.c
+++ b/drivers/gpio/pm8916_gpio.c
@@ -256,7 +256,7 @@ static int pm8941_pwrkey_probe(struct udevice *dev)
struct pm8916_gpio_bank *priv = dev_get_priv(dev);
int reg;
- priv->pid = dev_read_addr(dev);
+ priv->pid = devfdt_get_addr(dev);
if (priv->pid == FDT_ADDR_T_NONE)
return log_msg_ret("bad address", -EINVAL);
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index c78227f4da..258f13395d 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -316,7 +316,7 @@ static int gpio_exynos_bind(struct udevice *parent)
if (plat)
return 0;
- base = dev_read_addr_ptr(parent);
+ base = (struct s5p_gpio_bank *)devfdt_get_addr(parent);
for (node = fdt_first_subnode(blob, dev_of_offset(parent)), bank = base;
node > 0;
node = fdt_next_subnode(blob, node), bank++) {
@@ -339,7 +339,7 @@ static int gpio_exynos_bind(struct udevice *parent)
dev_set_of_offset(dev, node);
- reg = dev_read_addr(dev);
+ reg = devfdt_get_addr(dev);
if (reg != FDT_ADDR_T_NONE)
bank = (struct s5p_gpio_bank *)((ulong)base + reg);
diff --git a/drivers/gpio/sifive-gpio.c b/drivers/gpio/sifive-gpio.c
index bf3537b76b..24da3b3c23 100644
--- a/drivers/gpio/sifive-gpio.c
+++ b/drivers/gpio/sifive-gpio.c
@@ -159,7 +159,7 @@ static int sifive_gpio_ofdata_to_platdata(struct udevice *dev)
struct sifive_gpio_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c
index 3efccf496f..9c3a4428e1 100644
--- a/drivers/gpio/sunxi_gpio.c
+++ b/drivers/gpio/sunxi_gpio.c
@@ -293,7 +293,7 @@ static int gpio_sunxi_bind(struct udevice *parent)
if (plat)
return 0;
- ctlr = dev_read_addr_ptr(parent);
+ ctlr = (struct sunxi_gpio_reg *)devfdt_get_addr(parent);
for (bank = 0; bank < soc_data->no_banks; bank++) {
struct sunxi_gpio_platdata *plat;
struct udevice *dev;
diff --git a/drivers/gpio/vybrid_gpio.c b/drivers/gpio/vybrid_gpio.c
index 4efff5c364..d2c1d7d859 100644
--- a/drivers/gpio/vybrid_gpio.c
+++ b/drivers/gpio/vybrid_gpio.c
@@ -109,7 +109,7 @@ static int vybrid_gpio_odata_to_platdata(struct udevice *dev)
struct vybrid_gpio_platdata *plat = dev_get_platdata(dev);
fdt_addr_t base_addr;
- base_addr = dev_read_addr(dev);
+ base_addr = devfdt_get_addr(dev);
if (base_addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/i2c/at91_i2c.c b/drivers/i2c/at91_i2c.c
index 9d6c6d80e2..c817ed6bf9 100644
--- a/drivers/i2c/at91_i2c.c
+++ b/drivers/i2c/at91_i2c.c
@@ -225,7 +225,7 @@ static int at91_i2c_ofdata_to_platdata(struct udevice *dev)
struct at91_i2c_bus *bus = dev_get_priv(dev);
int node = dev_of_offset(dev);
- bus->regs = dev_read_addr_ptr(dev);
+ bus->regs = (struct at91_i2c_regs *)devfdt_get_addr(dev);
bus->pdata = (struct at91_i2c_pdata *)dev_get_driver_data(dev);
bus->clock_frequency = fdtdec_get_int(blob, node,
"clock-frequency", 100000);
diff --git a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c
index a54f2151fd..f8e9d003e6 100644
--- a/drivers/i2c/davinci_i2c.c
+++ b/drivers/i2c/davinci_i2c.c
@@ -471,7 +471,7 @@ static int davinci_i2c_probe(struct udevice *dev)
struct i2c_bus *i2c_bus = dev_get_priv(dev);
i2c_bus->id = dev->seq;
- i2c_bus->regs = dev_read_addr_ptr(dev);
+ i2c_bus->regs = (struct i2c_regs *)devfdt_get_addr(dev);
i2c_bus->speed = 100000;
_davinci_i2c_init(i2c_bus->regs, i2c_bus->speed, 0);
diff --git a/drivers/i2c/exynos_hs_i2c.c b/drivers/i2c/exynos_hs_i2c.c
index 5785adedb6..4fc9d90580 100644
--- a/drivers/i2c/exynos_hs_i2c.c
+++ b/drivers/i2c/exynos_hs_i2c.c
@@ -525,7 +525,7 @@ static int s3c_i2c_ofdata_to_platdata(struct udevice *dev)
node = dev_of_offset(dev);
- i2c_bus->hsregs = dev_read_addr_ptr(dev);
+ i2c_bus->hsregs = (struct exynos5_hsi2c *)devfdt_get_addr(dev);
i2c_bus->id = pinmux_decode_periph_id(blob, node);
diff --git a/drivers/i2c/i2c-uniphier-f.c b/drivers/i2c/i2c-uniphier-f.c
index a110fe9e8d..d8b4a683bc 100644
--- a/drivers/i2c/i2c-uniphier-f.c
+++ b/drivers/i2c/i2c-uniphier-f.c
@@ -94,7 +94,7 @@ static int uniphier_fi2c_probe(struct udevice *dev)
fdt_addr_t addr;
struct uniphier_fi2c_priv *priv = dev_get_priv(dev);
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/i2c/i2c-uniphier.c b/drivers/i2c/i2c-uniphier.c
index e7f44e14e9..f06523ab99 100644
--- a/drivers/i2c/i2c-uniphier.c
+++ b/drivers/i2c/i2c-uniphier.c
@@ -50,7 +50,7 @@ static int uniphier_i2c_probe(struct udevice *dev)
fdt_addr_t addr;
struct uniphier_i2c_priv *priv = dev_get_priv(dev);
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/i2c/imx_lpi2c.c b/drivers/i2c/imx_lpi2c.c
index feeed1e9a2..b7b2aafc7f 100644
--- a/drivers/i2c/imx_lpi2c.c
+++ b/drivers/i2c/imx_lpi2c.c
@@ -447,7 +447,7 @@ static int imx_lpi2c_probe(struct udevice *bus)
i2c_bus->driver_data = dev_get_driver_data(bus);
- addr = dev_read_addr(bus);
+ addr = devfdt_get_addr(bus);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/i2c/iproc_i2c.c b/drivers/i2c/iproc_i2c.c
index b7e9ced898..a846e0a1fe 100644
--- a/drivers/i2c/iproc_i2c.c
+++ b/drivers/i2c/iproc_i2c.c
@@ -678,7 +678,7 @@ static int iproc_i2c_ofdata_to_platdata(struct udevice *bus)
int node = dev_of_offset(bus);
const void *blob = gd->fdt_blob;
- bus_prvdata->base = map_physmem(dev_read_addr(bus),
+ bus_prvdata->base = map_physmem(devfdt_get_addr(bus),
sizeof(void *),
MAP_NOCACHE);
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 1a1de67252..3b0d27e6cd 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -899,7 +899,7 @@ static int mxc_i2c_probe(struct udevice *bus)
i2c_bus->driver_data = dev_get_driver_data(bus);
- addr = dev_read_addr(bus);
+ addr = devfdt_get_addr(bus);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 0af4e333c4..8592a819c4 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -1067,7 +1067,7 @@ static int omap_i2c_ofdata_to_platdata(struct udevice *bus)
{
struct omap_i2c_platdata *plat = dev_get_platdata(bus);
- plat->base = dev_read_addr(bus);
+ plat->base = devfdt_get_addr(bus);
plat->speed = dev_read_u32_default(bus, "clock-frequency",
I2C_SPEED_STANDARD_RATE);
plat->ip_rev = dev_get_driver_data(bus);
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index cb45d3c100..5907217981 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -310,7 +310,7 @@ static int s3c_i2c_ofdata_to_platdata(struct udevice *dev)
node = dev_of_offset(dev);
- i2c_bus->regs = dev_read_addr_ptr(dev);
+ i2c_bus->regs = (struct s3c24x0_i2c *)devfdt_get_addr(dev);
i2c_bus->id = pinmux_decode_periph_id(blob, node);
diff --git a/drivers/input/tegra-kbc.c b/drivers/input/tegra-kbc.c
index f07a51dc30..3409bb61d5 100644
--- a/drivers/input/tegra-kbc.c
+++ b/drivers/input/tegra-kbc.c
@@ -291,7 +291,7 @@ static int tegra_kbd_probe(struct udevice *dev)
struct input_config *input = &uc_priv->input;
int ret;
- priv->kbc = dev_read_addr_ptr(dev);
+ priv->kbc = (struct kbc_tegra *)devfdt_get_addr(dev);
if ((fdt_addr_t)priv->kbc == FDT_ADDR_T_NONE) {
debug("%s: No keyboard register found\n", __func__);
return -EINVAL;
diff --git a/drivers/mailbox/tegra-hsp.c b/drivers/mailbox/tegra-hsp.c
index e91dac201d..f82e6d3d16 100644
--- a/drivers/mailbox/tegra-hsp.c
+++ b/drivers/mailbox/tegra-hsp.c
@@ -153,7 +153,7 @@ static int tegra_hsp_probe(struct udevice *dev)
debug("%s(dev=%p)\n", __func__, dev);
- thsp->regs = dev_read_addr(dev);
+ thsp->regs = devfdt_get_addr(dev);
if (thsp->regs == FDT_ADDR_T_NONE)
return -ENODEV;
diff --git a/drivers/misc/altera_sysid.c b/drivers/misc/altera_sysid.c
index c6502650b7..387c70b070 100644
--- a/drivers/misc/altera_sysid.c
+++ b/drivers/misc/altera_sysid.c
@@ -73,7 +73,7 @@ static int altera_sysid_ofdata_to_platdata(struct udevice *dev)
{
struct altera_sysid_platdata *plat = dev_get_platdata(dev);
- plat->regs = map_physmem(dev_read_addr(dev),
+ plat->regs = map_physmem(devfdt_get_addr(dev),
sizeof(struct altera_sysid_regs),
MAP_NOCACHE);
diff --git a/drivers/misc/imx8/scu.c b/drivers/misc/imx8/scu.c
index 223aac8518..ee635eb947 100644
--- a/drivers/misc/imx8/scu.c
+++ b/drivers/misc/imx8/scu.c
@@ -187,7 +187,7 @@ static int imx8_scu_probe(struct udevice *dev)
debug("%s(dev=%p) (plat=%p)\n", __func__, dev, plat);
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/misc/microchip_flexcom.c b/drivers/misc/microchip_flexcom.c
index 64cc4ae7b6..44a8b180a4 100644
--- a/drivers/misc/microchip_flexcom.c
+++ b/drivers/misc/microchip_flexcom.c
@@ -26,7 +26,7 @@ static int microchip_flexcom_ofdata_to_platdata(struct udevice *dev)
struct microchip_flexcom_platdata *plat = dev_get_platdata(dev);
int ret;
- plat->regs = map_physmem(dev_read_addr(dev),
+ plat->regs = map_physmem(devfdt_get_addr(dev),
sizeof(struct microchip_flexcom_regs),
MAP_NOCACHE);
diff --git a/drivers/mmc/aspeed_sdhci.c b/drivers/mmc/aspeed_sdhci.c
index 543c65a8e3..8929e603f3 100644
--- a/drivers/mmc/aspeed_sdhci.c
+++ b/drivers/mmc/aspeed_sdhci.c
@@ -34,7 +34,7 @@ static int aspeed_sdhci_probe(struct udevice *dev)
goto free;
host->name = dev->name;
- host->ioaddr = dev_read_addr_ptr(dev);
+ host->ioaddr = (void *)devfdt_get_addr(dev);
max_clk = clk_get_rate(&clk);
if (IS_ERR_VALUE(max_clk)) {
diff --git a/drivers/mmc/atmel_sdhci.c b/drivers/mmc/atmel_sdhci.c
index 0c53caf448..2b797c9bd4 100644
--- a/drivers/mmc/atmel_sdhci.c
+++ b/drivers/mmc/atmel_sdhci.c
@@ -69,7 +69,7 @@ static int atmel_sdhci_probe(struct udevice *dev)
return ret;
host->name = dev->name;
- host->ioaddr = dev_read_addr_ptr(dev);
+ host->ioaddr = (void *)devfdt_get_addr(dev);
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD;
host->bus_width = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c
index 7a410d1dd3..5cdf3c506f 100644
--- a/drivers/mmc/bcm2835_sdhci.c
+++ b/drivers/mmc/bcm2835_sdhci.c
@@ -182,7 +182,7 @@ static int bcm2835_sdhci_probe(struct udevice *dev)
int ret;
int clock_id = (int)dev_get_driver_data(dev);
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/mmc/bcm2835_sdhost.c b/drivers/mmc/bcm2835_sdhost.c
index b793028ab5..c4876e81f8 100644
--- a/drivers/mmc/bcm2835_sdhost.c
+++ b/drivers/mmc/bcm2835_sdhost.c
@@ -766,7 +766,7 @@ static int bcm2835_probe(struct udevice *dev)
upriv->mmc = &plat->mmc;
plat->cfg.name = dev->name;
- host->phys_addr = dev_read_addr(dev);
+ host->phys_addr = devfdt_get_addr(dev);
if (host->phys_addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/mmc/bcmstb_sdhci.c b/drivers/mmc/bcmstb_sdhci.c
index 5269aa77ce..c14f8289e6 100644
--- a/drivers/mmc/bcmstb_sdhci.c
+++ b/drivers/mmc/bcmstb_sdhci.c
@@ -62,7 +62,7 @@ static int sdhci_bcmstb_probe(struct udevice *dev)
fdt_addr_t base;
int ret;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c
index bc0d5ffed5..fb28f0166f 100644
--- a/drivers/mmc/ftsdc010_mci.c
+++ b/drivers/mmc/ftsdc010_mci.c
@@ -395,7 +395,7 @@ static int ftsdc010_mmc_ofdata_to_platdata(struct udevice *dev)
struct ftsdc_priv *priv = dev_get_priv(dev);
struct ftsdc010_chip *chip = &priv->chip;
chip->name = dev->name;
- chip->ioaddr = dev_read_addr_ptr(dev);
+ chip->ioaddr = (void *)devfdt_get_addr(dev);
chip->buswidth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"bus-width", 4);
chip->priv = dev;
diff --git a/drivers/mmc/hi6220_dw_mmc.c b/drivers/mmc/hi6220_dw_mmc.c
index 67d6a05b3b..6de7924383 100644
--- a/drivers/mmc/hi6220_dw_mmc.c
+++ b/drivers/mmc/hi6220_dw_mmc.c
@@ -33,7 +33,7 @@ static int hi6220_dwmmc_ofdata_to_platdata(struct udevice *dev)
struct dwmci_host *host = &priv->host;
host->name = dev->name;
- host->ioaddr = dev_read_addr_ptr(dev);
+ host->ioaddr = (void *)devfdt_get_addr(dev);
host->buswidth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"bus-width", 4);
diff --git a/drivers/mmc/iproc_sdhci.c b/drivers/mmc/iproc_sdhci.c
index 9f530638e3..91e2e3f0b8 100644
--- a/drivers/mmc/iproc_sdhci.c
+++ b/drivers/mmc/iproc_sdhci.c
@@ -188,7 +188,7 @@ static int iproc_sdhci_probe(struct udevice *dev)
iproc_host->shadow_blk = 0;
host->name = dev->name;
- host->ioaddr = dev_read_addr_ptr(dev);
+ host->ioaddr = (void *)devfdt_get_addr(dev);
host->voltages = MMC_VDD_165_195 |
MMC_VDD_32_33 | MMC_VDD_33_34;
host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B;
diff --git a/drivers/mmc/jz_mmc.c b/drivers/mmc/jz_mmc.c
index b33f085073..d3f1eddf45 100644
--- a/drivers/mmc/jz_mmc.c
+++ b/drivers/mmc/jz_mmc.c
@@ -450,7 +450,7 @@ static int jz_mmc_ofdata_to_platdata(struct udevice *dev)
struct mmc_config *cfg;
int ret;
- priv->regs = map_physmem(dev_read_addr(dev), 0x100, MAP_NOCACHE);
+ priv->regs = map_physmem(devfdt_get_addr(dev), 0x100, MAP_NOCACHE);
cfg = &plat->cfg;
cfg->name = "MSC";
diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
index 719dd1e5e5..b7f793cd04 100644
--- a/drivers/mmc/meson_gx_mmc.c
+++ b/drivers/mmc/meson_gx_mmc.c
@@ -228,7 +228,7 @@ static int meson_mmc_ofdata_to_platdata(struct udevice *dev)
struct meson_mmc_platdata *pdata = dev_get_platdata(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/mmc/msm_sdhci.c b/drivers/mmc/msm_sdhci.c
index 56c3e35c9e..da3ae2ec35 100644
--- a/drivers/mmc/msm_sdhci.c
+++ b/drivers/mmc/msm_sdhci.c
@@ -171,7 +171,7 @@ static int msm_ofdata_to_platdata(struct udevice *dev)
int node = dev_of_offset(dev);
host->name = strdup(dev->name);
- host->ioaddr = dev_read_addr_ptr(dev);
+ host->ioaddr = (void *)devfdt_get_addr(dev);
host->bus_width = fdtdec_get_int(gd->fdt_blob, node, "bus-width", 4);
host->index = fdtdec_get_uint(gd->fdt_blob, node, "index", 0);
priv->base = (void *)fdtdec_get_addr_size_auto_parent(gd->fdt_blob,
diff --git a/drivers/mmc/mv_sdhci.c b/drivers/mmc/mv_sdhci.c
index 9b3dfa13e6..f5f3e43247 100644
--- a/drivers/mmc/mv_sdhci.c
+++ b/drivers/mmc/mv_sdhci.c
@@ -112,7 +112,7 @@ static int mv_sdhci_probe(struct udevice *dev)
int ret;
host->name = MVSDH_NAME;
- host->ioaddr = dev_read_addr_ptr(dev);
+ host->ioaddr = (void *)devfdt_get_addr(dev);
host->quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_WAIT_SEND_CMD;
host->mmc = &plat->mmc;
host->mmc->dev = dev;
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 715eee0e3e..db1f85125f 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -1911,7 +1911,7 @@ static int omap_hsmmc_ofdata_to_platdata(struct udevice *dev)
int node = dev_of_offset(dev);
int ret;
- plat->base_addr = map_physmem(dev_read_addr(dev),
+ plat->base_addr = map_physmem(devfdt_get_addr(dev),
sizeof(struct hsmmc *),
MAP_NOCACHE);
@@ -1933,7 +1933,7 @@ static int omap_hsmmc_ofdata_to_platdata(struct udevice *dev)
plat->controller_flags |= of_data->controller_flags;
#ifdef CONFIG_OMAP54XX
- fixups = platform_fixups_mmc(dev_read_addr(dev));
+ fixups = platform_fixups_mmc(devfdt_get_addr(dev));
if (fixups) {
plat->hw_rev = fixups->hw_rev;
cfg->host_caps &= ~fixups->unsupported_caps;
diff --git a/drivers/mmc/sdhci-cadence.c b/drivers/mmc/sdhci-cadence.c
index cc99bebc30..7b5010b655 100644
--- a/drivers/mmc/sdhci-cadence.c
+++ b/drivers/mmc/sdhci-cadence.c
@@ -260,7 +260,7 @@ static int sdhci_cdns_probe(struct udevice *dev)
fdt_addr_t base;
int ret;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c
index ad386909e9..2e994d0178 100644
--- a/drivers/mmc/sh_mmcif.c
+++ b/drivers/mmc/sh_mmcif.c
@@ -680,7 +680,7 @@ static int sh_mmcif_dm_probe(struct udevice *dev)
fdt_addr_t base;
int ret;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/mmc/sh_sdhi.c b/drivers/mmc/sh_sdhi.c
index 315f95cce8..772fe943e4 100644
--- a/drivers/mmc/sh_sdhi.c
+++ b/drivers/mmc/sh_sdhi.c
@@ -834,7 +834,7 @@ static int sh_sdhi_dm_probe(struct udevice *dev)
fdt_addr_t base;
int ret;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/mmc/socfpga_dw_mmc.c b/drivers/mmc/socfpga_dw_mmc.c
index 0022f943bd..892222d27d 100644
--- a/drivers/mmc/socfpga_dw_mmc.c
+++ b/drivers/mmc/socfpga_dw_mmc.c
@@ -109,7 +109,7 @@ static int socfpga_dwmmc_ofdata_to_platdata(struct udevice *dev)
}
host->name = dev->name;
- host->ioaddr = dev_read_addr_ptr(dev);
+ host->ioaddr = (void *)devfdt_get_addr(dev);
host->buswidth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"bus-width", 4);
host->clksel = socfpga_dwmci_clksel;
diff --git a/drivers/mmc/sti_sdhci.c b/drivers/mmc/sti_sdhci.c
index 5578feebef..9bcd8ce5f6 100644
--- a/drivers/mmc/sti_sdhci.c
+++ b/drivers/mmc/sti_sdhci.c
@@ -116,7 +116,7 @@ static int sti_sdhci_ofdata_to_platdata(struct udevice *dev)
struct sdhci_host *host = dev_get_priv(dev);
host->name = strdup(dev->name);
- host->ioaddr = dev_read_addr_ptr(dev);
+ host->ioaddr = (void *)devfdt_get_addr(dev);
host->bus_width = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"bus-width", 4);
diff --git a/drivers/mmc/tangier_sdhci.c b/drivers/mmc/tangier_sdhci.c
index 879e2c98a2..0d6e5d6246 100644
--- a/drivers/mmc/tangier_sdhci.c
+++ b/drivers/mmc/tangier_sdhci.c
@@ -35,7 +35,7 @@ static int sdhci_tangier_probe(struct udevice *dev)
fdt_addr_t base;
int ret;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c
index c653973676..20cd237ef0 100644
--- a/drivers/mmc/tmio-common.c
+++ b/drivers/mmc/tmio-common.c
@@ -722,7 +722,7 @@ int tmio_sd_probe(struct udevice *dev, u32 quirks)
ulong mclk;
int ret;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/mmc/xenon_sdhci.c b/drivers/mmc/xenon_sdhci.c
index 356dd9846d..e765dd384a 100644
--- a/drivers/mmc/xenon_sdhci.c
+++ b/drivers/mmc/xenon_sdhci.c
@@ -455,7 +455,7 @@ static int xenon_sdhci_ofdata_to_platdata(struct udevice *dev)
const char *name;
host->name = dev->name;
- host->ioaddr = dev_read_addr_ptr(dev);
+ host->ioaddr = (void *)devfdt_get_addr(dev);
if (device_is_compatible(dev, "marvell,armada-3700-sdhci"))
priv->pad_ctrl_reg = (void *)devfdt_get_addr_index(dev, 1);
diff --git a/drivers/net/ag7xxx.c b/drivers/net/ag7xxx.c
index ccba3947ac..3b5d11f956 100644
--- a/drivers/net/ag7xxx.c
+++ b/drivers/net/ag7xxx.c
@@ -1256,7 +1256,7 @@ static int ag7xxx_eth_ofdata_to_platdata(struct udevice *dev)
const char *phy_mode;
int ret;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
pdata->phy_interface = -1;
/* Decoding of convoluted PHY wiring on Atheros MIPS. */
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 1d9eefbb3e..62941bb175 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -1995,9 +1995,9 @@ static int eqos_probe(struct udevice *dev)
eqos->dev = dev;
eqos->config = (void *)dev_get_driver_data(dev);
- eqos->regs = dev_read_addr(dev);
+ eqos->regs = devfdt_get_addr(dev);
if (eqos->regs == FDT_ADDR_T_NONE) {
- pr_err("dev_read_addr() failed");
+ pr_err("devfdt_get_addr() failed");
return -ENODEV;
}
eqos->mac_regs = (void *)(eqos->regs + EQOS_MAC_REGS_BASE);
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index b9d80a5b08..fd589a0764 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -690,7 +690,7 @@ static int ethoc_ofdata_to_platdata(struct udevice *dev)
struct ethoc_eth_pdata *pdata = dev_get_platdata(dev);
fdt_addr_t addr;
- pdata->eth_pdata.iobase = dev_read_addr(dev);
+ pdata->eth_pdata.iobase = devfdt_get_addr(dev);
addr = devfdt_get_addr_index(dev, 1);
if (addr != FDT_ADDR_T_NONE)
pdata->packet_base = addr;
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index bb55be9a26..b3d4acb106 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -1534,7 +1534,7 @@ static int fecmxc_ofdata_to_platdata(struct udevice *dev)
struct fec_priv *priv = dev_get_priv(dev);
const char *phy_mode;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
priv->eth = (struct ethernet_regs *)pdata->iobase;
pdata->phy_interface = -1;
diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c
index e27f7e5321..f33529cb67 100644
--- a/drivers/net/fsl_mcdmafec.c
+++ b/drivers/net/fsl_mcdmafec.c
@@ -570,7 +570,7 @@ static int mcdmafec_ofdata_to_platdata(struct udevice *dev)
struct eth_pdata *pdata = dev_get_platdata(dev);
const u32 *val;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
/* Default to 10Mbit/s */
pdata->max_speed = 10;
diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c
index 5676a5b3ba..e4d08f2ba0 100644
--- a/drivers/net/ftgmac100.c
+++ b/drivers/net/ftgmac100.c
@@ -517,7 +517,7 @@ static int ftgmac100_ofdata_to_platdata(struct udevice *dev)
struct ftgmac100_data *priv = dev_get_priv(dev);
const char *phy_mode;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
pdata->phy_interface = -1;
phy_mode = dev_read_string(dev, "phy-mode");
if (phy_mode)
diff --git a/drivers/net/ftmac100.c b/drivers/net/ftmac100.c
index 292690de96..79c64ec89a 100644
--- a/drivers/net/ftmac100.c
+++ b/drivers/net/ftmac100.c
@@ -398,7 +398,7 @@ static int ftmac100_ofdata_to_platdata(struct udevice *dev)
struct ftmac100_data *priv = dev_get_priv(dev);
struct eth_pdata *pdata = dev_get_platdata(dev);
const char *mac;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
priv->iobase = pdata->iobase;
mac = dtbmacaddr(0);
if (mac)
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index d22668446d..1773c7671f 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -642,7 +642,7 @@ static int ks8851_ofdata_to_platdata(struct udevice *dev)
struct ks_net *ks = dev_get_priv(dev);
struct eth_pdata *pdata = dev_get_platdata(dev);
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
ks->iobase = pdata->iobase;
return 0;
diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c
index f94a2d8123..1a8351be1c 100644
--- a/drivers/net/mcffec.c
+++ b/drivers/net/mcffec.c
@@ -589,7 +589,7 @@ static int mcffec_ofdata_to_platdata(struct udevice *dev)
struct eth_pdata *pdata = dev_get_platdata(dev);
const u32 *val;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
/* Default to 10Mbit/s */
pdata->max_speed = 10;
diff --git a/drivers/net/mtk_eth.c b/drivers/net/mtk_eth.c
index a06a15772c..86f1360ae3 100644
--- a/drivers/net/mtk_eth.c
+++ b/drivers/net/mtk_eth.c
@@ -1418,7 +1418,7 @@ static int mtk_eth_ofdata_to_platdata(struct udevice *dev)
priv->soc = dev_get_driver_data(dev);
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
/* get corresponding ethsys phandle */
ret = dev_read_phandle_with_args(dev, "mediatek,ethsys", NULL, 0, 0,
diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c
index 2f9464b961..86b1b8cee5 100644
--- a/drivers/net/mvgbe.c
+++ b/drivers/net/mvgbe.c
@@ -997,7 +997,7 @@ static int mvgbe_ofdata_to_platdata(struct udevice *dev)
int pnode;
unsigned long addr;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
pdata->phy_interface = -1;
pnode = fdt_node_offset_by_compatible(blob, node,
diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c
index 4c7d06ca40..092f619bd5 100644
--- a/drivers/net/mvneta.c
+++ b/drivers/net/mvneta.c
@@ -1796,7 +1796,7 @@ static int mvneta_ofdata_to_platdata(struct udevice *dev)
struct eth_pdata *pdata = dev_get_platdata(dev);
const char *phy_mode;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
/* Get phy-mode / phy_interface from DT */
pdata->phy_interface = -1;
diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c
index 886f53ee82..393ee9bb81 100644
--- a/drivers/net/ravb.c
+++ b/drivers/net/ravb.c
@@ -651,7 +651,7 @@ int ravb_ofdata_to_platdata(struct udevice *dev)
const fdt32_t *cell;
int ret = 0;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
pdata->phy_interface = -1;
phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
NULL);
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 4cbffb14c5..8823769edd 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -918,7 +918,7 @@ int sh_ether_ofdata_to_platdata(struct udevice *dev)
const fdt32_t *cell;
int ret = 0;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
pdata->phy_interface = -1;
phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
NULL);
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 09372d7f6b..9c5dc46483 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -612,7 +612,7 @@ static int smc911x_ofdata_to_platdata(struct udevice *dev)
struct smc911x_priv *priv = dev_get_priv(dev);
struct eth_pdata *pdata = dev_get_platdata(dev);
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
priv->iobase = pdata->iobase;
return 0;
diff --git a/drivers/net/sni_ave.c b/drivers/net/sni_ave.c
index 0f7ada8c3e..0784635689 100644
--- a/drivers/net/sni_ave.c
+++ b/drivers/net/sni_ave.c
@@ -746,7 +746,7 @@ static int ave_ofdata_to_platdata(struct udevice *dev)
if (!priv->data)
return -EINVAL;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
pdata->phy_interface = -1;
phy_mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "phy-mode",
NULL);
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index 546cc6ccb6..e2b05ace8f 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -919,7 +919,7 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
#endif
int ret;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
if (pdata->iobase == FDT_ADDR_T_NONE) {
debug("%s: Cannot find MAC base address\n", __func__);
return -EINVAL;
diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c
index df18ecc064..6364beb9f2 100644
--- a/drivers/net/sunxi_emac.c
+++ b/drivers/net/sunxi_emac.c
@@ -594,7 +594,7 @@ static int sunxi_emac_eth_ofdata_to_platdata(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
return 0;
}
diff --git a/drivers/net/ti/keystone_net.c b/drivers/net/ti/keystone_net.c
index 50f0d33a83..e3ac40ca0d 100644
--- a/drivers/net/ti/keystone_net.c
+++ b/drivers/net/ti/keystone_net.c
@@ -787,7 +787,7 @@ static int ks2_eth_ofdata_to_platdata(struct udevice *dev)
ks2_eth_parse_slave_interface(dev_of_offset(dev), gbe_0, priv, pdata);
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
return 0;
}
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
index 99d4d85c52..2cd5596768 100644
--- a/drivers/net/xilinx_axi_emac.c
+++ b/drivers/net/xilinx_axi_emac.c
@@ -722,7 +722,7 @@ static int axi_emac_ofdata_to_platdata(struct udevice *dev)
int offset = 0;
const char *phy_mode;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
priv->iobase = (struct axi_regs *)pdata->iobase;
offset = fdtdec_lookup_phandle(gd->fdt_blob, node,
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 64c18bae74..9bdb6798b6 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -599,7 +599,7 @@ static int emaclite_ofdata_to_platdata(struct udevice *dev)
struct xemaclite *emaclite = dev_get_priv(dev);
int offset = 0;
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
emaclite->regs = (struct emaclite_regs *)ioremap_nocache(pdata->iobase,
0x10000);
diff --git a/drivers/pci_endpoint/pcie-cadence-ep.c b/drivers/pci_endpoint/pcie-cadence-ep.c
index 74dfdde154..59231d340a 100644
--- a/drivers/pci_endpoint/pcie-cadence-ep.c
+++ b/drivers/pci_endpoint/pcie-cadence-ep.c
@@ -144,7 +144,7 @@ static int cdns_pci_ep_probe(struct udevice *dev)
{
struct cdns_pcie *pdata = dev_get_priv(dev);
- pdata->reg_base = dev_read_addr_ptr(dev);
+ pdata->reg_base = (void __iomem *)devfdt_get_addr(dev);
if (!pdata->reg_base)
return -ENOMEM;
diff --git a/drivers/pinctrl/ath79/pinctrl_ar933x.c b/drivers/pinctrl/ath79/pinctrl_ar933x.c
index 61e8081874..a0625d7c83 100644
--- a/drivers/pinctrl/ath79/pinctrl_ar933x.c
+++ b/drivers/pinctrl/ath79/pinctrl_ar933x.c
@@ -111,7 +111,7 @@ static int ar933x_pinctrl_probe(struct udevice *dev)
struct ar933x_pinctrl_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/pinctrl/ath79/pinctrl_qca953x.c b/drivers/pinctrl/ath79/pinctrl_qca953x.c
index 2d5a4a3ab2..c9f9608c92 100644
--- a/drivers/pinctrl/ath79/pinctrl_qca953x.c
+++ b/drivers/pinctrl/ath79/pinctrl_qca953x.c
@@ -131,7 +131,7 @@ static int qca953x_pinctrl_probe(struct udevice *dev)
struct qca953x_pinctrl_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/pinctrl/exynos/pinctrl-exynos.c b/drivers/pinctrl/exynos/pinctrl-exynos.c
index 4cdc071d55..e3ac5a6e49 100644
--- a/drivers/pinctrl/exynos/pinctrl-exynos.c
+++ b/drivers/pinctrl/exynos/pinctrl-exynos.c
@@ -127,7 +127,7 @@ int exynos_pinctrl_probe(struct udevice *dev)
if (!priv)
return -EINVAL;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index fb497803b9..2dee79af17 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -592,7 +592,7 @@ int armada_37xx_pinctrl_probe(struct udevice *dev)
info->data = (struct armada_37xx_pin_data *)dev_get_driver_data(dev);
pin_data = info->data;
- info->base = dev_read_addr_ptr(dev);
+ info->base = (void __iomem *)devfdt_get_addr(dev);
if (!info->base) {
pr_err("unable to find regmap\n");
return -ENODEV;
diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index fdb7920b55..801d14253c 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -158,7 +158,7 @@ static int atmel_pinctrl_probe(struct udevice *dev)
fdt_addr_t addr_base;
dev = dev_get_parent(dev);
- addr_base = dev_read_addr(dev);
+ addr_base = devfdt_get_addr(dev);
if (addr_base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/pinctrl/renesas/pfc-r7s72100.c b/drivers/pinctrl/renesas/pfc-r7s72100.c
index 9d7814a5f2..5055780bf7 100644
--- a/drivers/pinctrl/renesas/pfc-r7s72100.c
+++ b/drivers/pinctrl/renesas/pfc-r7s72100.c
@@ -112,7 +112,7 @@ static int r7s72100_pfc_probe(struct udevice *dev)
fdt_addr_t addr_base;
ofnode node;
- addr_base = dev_read_addr(dev);
+ addr_base = devfdt_get_addr(dev);
if (addr_base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/pinctrl/renesas/pfc.c b/drivers/pinctrl/renesas/pfc.c
index 340c8c0a74..1179afd2e7 100644
--- a/drivers/pinctrl/renesas/pfc.c
+++ b/drivers/pinctrl/renesas/pfc.c
@@ -817,7 +817,7 @@ static int sh_pfc_pinctrl_probe(struct udevice *dev)
enum sh_pfc_model model = dev_get_driver_data(dev);
fdt_addr_t base;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
index 631bb1f963..8545b9d070 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c
@@ -422,7 +422,7 @@ int uniphier_pinctrl_probe(struct udevice *dev,
struct uniphier_pinctrl_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev->parent);
+ addr = devfdt_get_addr(dev->parent);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/pwm/exynos_pwm.c b/drivers/pwm/exynos_pwm.c
index e55fcceafd..fed1583796 100644
--- a/drivers/pwm/exynos_pwm.c
+++ b/drivers/pwm/exynos_pwm.c
@@ -92,7 +92,7 @@ static int exynos_pwm_ofdata_to_platdata(struct udevice *dev)
{
struct exynos_pwm_priv *priv = dev_get_priv(dev);
- priv->regs = dev_read_addr_ptr(dev);
+ priv->regs = (struct s5p_timer *)devfdt_get_addr(dev);
return 0;
}
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 77a1907fd3..f5b9544cb8 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -130,7 +130,7 @@ static int imx_pwm_ofdata_to_platdata(struct udevice *dev)
{
struct imx_pwm_priv *priv = dev_get_priv(dev);
- priv->regs = dev_read_addr_ptr(dev);
+ priv->regs = (struct pwm_regs *)devfdt_get_addr(dev);
return 0;
}
diff --git a/drivers/pwm/pwm-mtk.c b/drivers/pwm/pwm-mtk.c
index 7bd82518d6..97ed477025 100644
--- a/drivers/pwm/pwm-mtk.c
+++ b/drivers/pwm/pwm-mtk.c
@@ -130,7 +130,7 @@ static int mtk_pwm_probe(struct udevice *dev)
int i;
priv->soc = (struct mtk_pwm_soc *)dev_get_driver_data(dev);
- priv->base = dev_read_addr_ptr(dev);
+ priv->base = (void __iomem *)devfdt_get_addr(dev);
if (!priv->base)
return -EINVAL;
ret = clk_get_by_name(dev, "top", &priv->top_clk);
diff --git a/drivers/pwm/sunxi_pwm.c b/drivers/pwm/sunxi_pwm.c
index e2ae1a8009..56215dbf6c 100644
--- a/drivers/pwm/sunxi_pwm.c
+++ b/drivers/pwm/sunxi_pwm.c
@@ -152,7 +152,7 @@ static int sunxi_pwm_ofdata_to_platdata(struct udevice *dev)
{
struct sunxi_pwm_priv *priv = dev_get_priv(dev);
- priv->regs = dev_read_addr_ptr(dev);
+ priv->regs = (struct sunxi_pwm *)devfdt_get_addr(dev);
return 0;
}
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index fe1bd5541b..06079d2a9c 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -247,7 +247,7 @@ static int uniphier_reset_probe(struct udevice *dev)
struct uniphier_reset_priv *priv = dev_get_priv(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev->parent);
+ addr = devfdt_get_addr(dev->parent);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/rtc/mvrtc.c b/drivers/rtc/mvrtc.c
index ed057f7bc4..6f49505d4e 100644
--- a/drivers/rtc/mvrtc.c
+++ b/drivers/rtc/mvrtc.c
@@ -172,7 +172,7 @@ static int mv_rtc_ofdata_to_platdata(struct udevice *dev)
{
struct mvrtc_pdata *pdata = dev_get_platdata(dev);
- pdata->iobase = dev_read_addr(dev);
+ pdata->iobase = devfdt_get_addr(dev);
return 0;
}
diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c
index 35b76f53f9..7a86161a0d 100644
--- a/drivers/serial/altera_jtag_uart.c
+++ b/drivers/serial/altera_jtag_uart.c
@@ -95,7 +95,7 @@ static int altera_jtaguart_ofdata_to_platdata(struct udevice *dev)
{
struct altera_jtaguart_platdata *plat = dev_get_platdata(dev);
- plat->regs = map_physmem(dev_read_addr(dev),
+ plat->regs = map_physmem(devfdt_get_addr(dev),
sizeof(struct altera_jtaguart_regs),
MAP_NOCACHE);
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index 0be5cd75c8..f88a293d56 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -87,7 +87,7 @@ static int altera_uart_ofdata_to_platdata(struct udevice *dev)
{
struct altera_uart_platdata *plat = dev_get_platdata(dev);
- plat->regs = map_physmem(dev_read_addr(dev),
+ plat->regs = map_physmem(devfdt_get_addr(dev),
sizeof(struct altera_uart_regs),
MAP_NOCACHE);
plat->uartclk = dev_read_u32_default(dev, "clock-frequency", 0);
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index f759ea8893..71cb31ff75 100644
--- a/drivers/serial/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
@@ -268,7 +268,7 @@ static int atmel_serial_probe(struct udevice *dev)
#if CONFIG_IS_ENABLED(OF_CONTROL)
fdt_addr_t addr_base;
- addr_base = dev_read_addr(dev);
+ addr_base = devfdt_get_addr(dev);
if (addr_base == FDT_ADDR_T_NONE)
return -ENODEV;
diff --git a/drivers/serial/serial_ar933x.c b/drivers/serial/serial_ar933x.c
index 9de94b69bd..382c3b3d34 100644
--- a/drivers/serial/serial_ar933x.c
+++ b/drivers/serial/serial_ar933x.c
@@ -150,7 +150,7 @@ static int ar933x_serial_probe(struct udevice *dev)
fdt_addr_t addr;
u32 val;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_arc.c b/drivers/serial/serial_arc.c
index 04063fbe39..70dbc6d6b5 100644
--- a/drivers/serial/serial_arc.c
+++ b/drivers/serial/serial_arc.c
@@ -114,7 +114,7 @@ static int arc_serial_ofdata_to_platdata(struct udevice *dev)
struct arc_serial_platdata *plat = dev_get_platdata(dev);
DECLARE_GLOBAL_DATA_PTR;
- plat->reg = dev_read_addr_ptr(dev);
+ plat->reg = (struct arc_serial_regs *)devfdt_get_addr(dev);
plat->uartclk = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
"clock-frequency", 0);
diff --git a/drivers/serial/serial_bcm283x_mu.c b/drivers/serial/serial_bcm283x_mu.c
index 8a4af87eb6..0102b10ed2 100644
--- a/drivers/serial/serial_bcm283x_mu.c
+++ b/drivers/serial/serial_bcm283x_mu.c
@@ -171,7 +171,7 @@ static int bcm283x_mu_serial_probe(struct udevice *dev)
* since we need the soc simple-bus to be probed so that the 'ranges'
* property is used.
*/
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
index 95cbe63b3d..0c63c41270 100644
--- a/drivers/serial/serial_lpuart.c
+++ b/drivers/serial/serial_lpuart.c
@@ -518,7 +518,7 @@ static int lpuart_serial_ofdata_to_platdata(struct udevice *dev)
int node = dev_of_offset(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_mcf.c b/drivers/serial/serial_mcf.c
index 402fd5343c..b599064b48 100644
--- a/drivers/serial/serial_mcf.c
+++ b/drivers/serial/serial_mcf.c
@@ -145,7 +145,7 @@ static int coldfire_ofdata_to_platdata(struct udevice *dev)
struct coldfire_serial_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr_base;
- addr_base = dev_read_addr(dev);
+ addr_base = devfdt_get_addr(dev);
if (addr_base == FDT_ADDR_T_NONE)
return -ENODEV;
diff --git a/drivers/serial/serial_meson.c b/drivers/serial/serial_meson.c
index 8cf849f8fe..439057b1b9 100644
--- a/drivers/serial/serial_meson.c
+++ b/drivers/serial/serial_meson.c
@@ -106,7 +106,7 @@ static int meson_serial_ofdata_to_platdata(struct udevice *dev)
struct meson_serial_platdata *plat = dev->platdata;
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_msm.c b/drivers/serial/serial_msm.c
index a1c9abcfbb..0cc1aadce4 100644
--- a/drivers/serial/serial_msm.c
+++ b/drivers/serial/serial_msm.c
@@ -219,7 +219,7 @@ static int msm_serial_ofdata_to_platdata(struct udevice *dev)
{
struct msm_serial_data *priv = dev_get_priv(dev);
- priv->base = dev_read_addr(dev);
+ priv->base = devfdt_get_addr(dev);
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index de6cefcd3a..42abb96a26 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -330,7 +330,7 @@ static int mxc_serial_ofdata_to_platdata(struct udevice *dev)
struct mxc_serial_platdata *plat = dev->platdata;
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index 2772c25f1d..6e5d81ce34 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -354,7 +354,7 @@ int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
fdt_addr_t addr;
int ret;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 9bb2be21e7..e3160cf1bd 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -181,7 +181,7 @@ static int s5p_serial_ofdata_to_platdata(struct udevice *dev)
struct s5p_serial_platdata *plat = dev->platdata;
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 13b179f03d..5f45d58e58 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -211,7 +211,7 @@ static int sh_serial_ofdata_to_platdata(struct udevice *dev)
fdt_addr_t addr;
int ret;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (!addr)
return -EINVAL;
diff --git a/drivers/serial/serial_sti_asc.c b/drivers/serial/serial_sti_asc.c
index 33ff396bff..5fbbfac820 100644
--- a/drivers/serial/serial_sti_asc.c
+++ b/drivers/serial/serial_sti_asc.c
@@ -171,7 +171,7 @@ static int sti_asc_serial_probe(struct udevice *dev)
unsigned long val;
fdt_addr_t base;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c
index cab0db2c96..e77b90670a 100644
--- a/drivers/serial/serial_stm32.c
+++ b/drivers/serial/serial_stm32.c
@@ -221,7 +221,7 @@ static int stm32_serial_ofdata_to_platdata(struct udevice *dev)
{
struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
- plat->base = dev_read_addr(dev);
+ plat->base = devfdt_get_addr(dev);
if (plat->base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c
index 4004cb8d48..ad691b66da 100644
--- a/drivers/serial/serial_uniphier.c
+++ b/drivers/serial/serial_uniphier.c
@@ -115,7 +115,7 @@ static int uniphier_serial_probe(struct udevice *dev)
fdt_addr_t base;
u32 tmp;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c
index 5116d13751..f29a9a0b56 100644
--- a/drivers/serial/serial_xuartlite.c
+++ b/drivers/serial/serial_xuartlite.c
@@ -85,7 +85,7 @@ static int uartlite_serial_ofdata_to_platdata(struct udevice *dev)
{
struct uartlite_platdata *plat = dev_get_platdata(dev);
- plat->regs = dev_read_addr_ptr(dev);
+ plat->regs = (struct uartlite *)devfdt_get_addr(dev);
return 0;
}
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 864d00a885..7b4e4d6130 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,21 +1,5 @@
menu "SOC (System On Chip) specific Drivers"
-config SOC_DEVICE
- bool "Enable SoC Device ID drivers using Driver Model"
- help
- This allows drivers to be provided for SoCs to help in identifying
- the SoC in use and matching SoC attributes for selecting SoC
- specific data. This is useful for other device drivers that may
- need different parameters or quirks enabled depending on the
- specific device variant in use.
-
-config SOC_DEVICE_TI_K3
- depends on SOC_DEVICE
- bool "Enable SoC Device ID driver for TI K3 SoCs"
- help
- This allows Texas Instruments Keystone 3 SoCs to identify
- specifics about the SoC in use.
-
source "drivers/soc/ti/Kconfig"
endmenu
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 9ef20ca506..ce253b7aa8 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -3,6 +3,3 @@
# Makefile for the U-Boot SOC specific device drivers.
obj-$(CONFIG_SOC_TI) += ti/
-obj-$(CONFIG_SOC_DEVICE) += soc-uclass.o
-obj-$(CONFIG_SOC_DEVICE_TI_K3) += soc_ti_k3.o
-obj-$(CONFIG_SANDBOX) += soc_sandbox.o
diff --git a/drivers/soc/soc-uclass.c b/drivers/soc/soc-uclass.c
deleted file mode 100644
index c32d647864..0000000000
--- a/drivers/soc/soc-uclass.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2020 - Texas Instruments Incorporated - http://www.ti.com/
- * Dave Gerlach <d-gerlach@ti.com>
- */
-
-#include <common.h>
-#include <soc.h>
-#include <dm.h>
-#include <errno.h>
-#include <dm/lists.h>
-#include <dm/root.h>
-
-int soc_get(struct udevice **devp)
-{
- return uclass_first_device_err(UCLASS_SOC, devp);
-}
-
-int soc_get_machine(struct udevice *dev, char *buf, int size)
-{
- struct soc_ops *ops = soc_get_ops(dev);
-
- if (!ops->get_machine)
- return -ENOSYS;
-
- return ops->get_machine(dev, buf, size);
-}
-
-int soc_get_family(struct udevice *dev, char *buf, int size)
-{
- struct soc_ops *ops = soc_get_ops(dev);
-
- if (!ops->get_family)
- return -ENOSYS;
-
- return ops->get_family(dev, buf, size);
-}
-
-int soc_get_revision(struct udevice *dev, char *buf, int size)
-{
- struct soc_ops *ops = soc_get_ops(dev);
-
- if (!ops->get_revision)
- return -ENOSYS;
-
- return ops->get_revision(dev, buf, size);
-}
-
-const struct soc_attr *
-soc_device_match(const struct soc_attr *matches)
-{
- bool match;
- struct udevice *soc;
- char str[SOC_MAX_STR_SIZE];
-
- if (!matches)
- return NULL;
-
- if (soc_get(&soc))
- return NULL;
-
- while (1) {
- if (!(matches->machine || matches->family ||
- matches->revision))
- break;
-
- match = true;
-
- if (matches->machine) {
- if (!soc_get_machine(soc, str, SOC_MAX_STR_SIZE)) {
- if (strcmp(matches->machine, str))
- match = false;
- }
- }
-
- if (matches->family) {
- if (!soc_get_family(soc, str, SOC_MAX_STR_SIZE)) {
- if (strcmp(matches->family, str))
- match = false;
- }
- }
-
- if (matches->revision) {
- if (!soc_get_revision(soc, str, SOC_MAX_STR_SIZE)) {
- if (strcmp(matches->revision, str))
- match = false;
- }
- }
-
- if (match)
- return matches;
-
- matches++;
- }
-
- return NULL;
-}
-
-UCLASS_DRIVER(soc) = {
- .id = UCLASS_SOC,
- .name = "soc",
-};
diff --git a/drivers/soc/soc_sandbox.c b/drivers/soc/soc_sandbox.c
deleted file mode 100644
index 5c82ad84fc..0000000000
--- a/drivers/soc/soc_sandbox.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Sandbox driver for the SOC uclass
- *
- * (C) Copyright 2020 - Texas Instruments Incorporated - http://www.ti.com/
- * Dave Gerlach <d-gerlach@ti.com>
- */
-
-#include <common.h>
-#include <dm.h>
-#include <soc.h>
-
-int soc_sandbox_get_family(struct udevice *dev, char *buf, int size)
-{
- snprintf(buf, size, "SANDBOX1xx");
-
- return 0;
-}
-
-int soc_sandbox_get_machine(struct udevice *dev, char *buf, int size)
-{
- snprintf(buf, size, "SANDBOX123");
-
- return 0;
-}
-
-int soc_sandbox_get_revision(struct udevice *dev, char *buf, int size)
-{
- snprintf(buf, size, "1.0");
-
- return 0;
-}
-
-static const struct soc_ops soc_sandbox_ops = {
- .get_family = soc_sandbox_get_family,
- .get_revision = soc_sandbox_get_revision,
- .get_machine = soc_sandbox_get_machine,
-};
-
-int soc_sandbox_probe(struct udevice *dev)
-{
- return 0;
-}
-
-static const struct udevice_id soc_sandbox_ids[] = {
- { .compatible = "sandbox,soc" },
- { }
-};
-
-U_BOOT_DRIVER(soc_sandbox) = {
- .name = "soc_sandbox",
- .id = UCLASS_SOC,
- .ops = &soc_sandbox_ops,
- .of_match = soc_sandbox_ids,
- .probe = soc_sandbox_probe,
-};
diff --git a/drivers/soc/soc_ti_k3.c b/drivers/soc/soc_ti_k3.c
deleted file mode 100644
index ae23ef7475..0000000000
--- a/drivers/soc/soc_ti_k3.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
- * Dave Gerlach <d-gerlach@ti.com>
- */
-
-#include <common.h>
-#include <dm.h>
-#include <soc.h>
-
-#include <asm/io.h>
-
-#define AM65X 0xbb5a
-#define J721E 0xbb64
-
-#define REV_SR1_0 0
-#define REV_SR2_0 1
-
-#define JTAG_ID_VARIANT_SHIFT 28
-#define JTAG_ID_VARIANT_MASK (0xf << 28)
-#define JTAG_ID_PARTNO_SHIFT 12
-#define JTAG_ID_PARTNO_MASK (0xffff << 12)
-
-struct soc_ti_k3_platdata {
- const char *family;
- const char *revision;
-};
-
-static const char *get_family_string(u32 idreg)
-{
- const char *family;
- u32 soc;
-
- soc = (idreg & JTAG_ID_PARTNO_MASK) >> JTAG_ID_PARTNO_SHIFT;
-
- switch (soc) {
- case AM65X:
- family = "AM65X";
- break;
- case J721E:
- family = "J721E";
- break;
- default:
- family = "Unknown Silicon";
- };
-
- return family;
-}
-
-static const char *get_rev_string(u32 idreg)
-{
- const char *revision;
- u32 rev;
-
- rev = (idreg & JTAG_ID_VARIANT_MASK) >> JTAG_ID_VARIANT_SHIFT;
-
- switch (rev) {
- case REV_SR1_0:
- revision = "1.0";
- break;
- case REV_SR2_0:
- revision = "2.0";
- break;
- default:
- revision = "Unknown Revision";
- };
-
- return revision;
-}
-
-static int soc_ti_k3_get_family(struct udevice *dev, char *buf, int size)
-{
- struct soc_ti_k3_platdata *plat = dev_get_platdata(dev);
-
- snprintf(buf, size, "%s", plat->family);
-
- return 0;
-}
-
-static int soc_ti_k3_get_revision(struct udevice *dev, char *buf, int size)
-{
- struct soc_ti_k3_platdata *plat = dev_get_platdata(dev);
-
- snprintf(buf, size, "SR%s", plat->revision);
-
- return 0;
-}
-
-static const struct soc_ops soc_ti_k3_ops = {
- .get_family = soc_ti_k3_get_family,
- .get_revision = soc_ti_k3_get_revision,
-};
-
-int soc_ti_k3_probe(struct udevice *dev)
-{
- struct soc_ti_k3_platdata *plat = dev_get_platdata(dev);
- u32 idreg;
- void *idreg_addr;
-
- idreg_addr = dev_read_addr_ptr(dev);
- if (!idreg_addr)
- return -EINVAL;
-
- idreg = readl(idreg_addr);
-
- plat->family = get_family_string(idreg);
- plat->revision = get_rev_string(idreg);
-
- return 0;
-}
-
-static const struct udevice_id soc_ti_k3_ids[] = {
- { .compatible = "ti,am654-chipid" },
- { }
-};
-
-U_BOOT_DRIVER(soc_ti_k3) = {
- .name = "soc_ti_k3",
- .id = UCLASS_SOC,
- .ops = &soc_ti_k3_ops,
- .of_match = soc_ti_k3_ids,
- .probe = soc_ti_k3_probe,
- .platdata_auto_alloc_size = sizeof(struct soc_ti_k3_platdata),
-};
diff --git a/drivers/spi/altera_spi.c b/drivers/spi/altera_spi.c
index 61372c52b0..3aa7a40b77 100644
--- a/drivers/spi/altera_spi.c
+++ b/drivers/spi/altera_spi.c
@@ -173,7 +173,7 @@ static int altera_spi_ofdata_to_platdata(struct udevice *bus)
{
struct altera_spi_platdata *plat = dev_get_platdata(bus);
- plat->regs = map_physmem(dev_read_addr(bus),
+ plat->regs = map_physmem(devfdt_get_addr(bus),
sizeof(struct altera_spi_regs),
MAP_NOCACHE);
diff --git a/drivers/spi/atcspi200_spi.c b/drivers/spi/atcspi200_spi.c
index 39c6e226ba..328b16c277 100644
--- a/drivers/spi/atcspi200_spi.c
+++ b/drivers/spi/atcspi200_spi.c
@@ -378,7 +378,7 @@ static int atcspi200_ofdata_to_platadata(struct udevice *bus)
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
- ns->regs = map_physmem(dev_read_addr(bus),
+ ns->regs = map_physmem(devfdt_get_addr(bus),
sizeof(struct atcspi200_spi_regs),
MAP_NOCACHE);
if (!ns->regs) {
diff --git a/drivers/spi/ath79_spi.c b/drivers/spi/ath79_spi.c
index 70bedc7fbe..f64a28c6e0 100644
--- a/drivers/spi/ath79_spi.c
+++ b/drivers/spi/ath79_spi.c
@@ -178,7 +178,7 @@ static int ath79_spi_probe(struct udevice *bus)
struct ath79_spi_priv *priv = dev_get_priv(bus);
fdt_addr_t addr;
- addr = dev_read_addr(bus);
+ addr = devfdt_get_addr(bus);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index c65733c87a..b120664661 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -351,7 +351,7 @@ static int atmel_spi_probe(struct udevice *bus)
if (ret)
return ret;
- bus_plat->regs = dev_read_addr_ptr(bus);
+ bus_plat->regs = (struct at91_spi *)devfdt_get_addr(bus);
#if CONFIG_IS_ENABLED(DM_GPIO)
struct atmel_spi_priv *priv = dev_get_priv(bus);
diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c
index 8fa6d35107..dec92df69b 100644
--- a/drivers/spi/cf_spi.c
+++ b/drivers/spi/cf_spi.c
@@ -392,7 +392,7 @@ static int coldfire_dspi_ofdata_to_platdata(struct udevice *bus)
int node = dev_of_offset(bus);
int *ctar, len;
- addr = dev_read_addr(bus);
+ addr = devfdt_get_addr(bus);
if (addr == FDT_ADDR_T_NONE)
return -ENOMEM;
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index a11433db1e..e1e9b45cc9 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -396,7 +396,7 @@ static int davinci_ofdata_to_platadata(struct udevice *bus)
struct davinci_spi_platdata *plat = bus->platdata;
fdt_addr_t addr;
- addr = dev_read_addr(bus);
+ addr = devfdt_get_addr(bus);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
index 2559aac2e9..c9b14f9029 100644
--- a/drivers/spi/designware_spi.c
+++ b/drivers/spi/designware_spi.c
@@ -157,7 +157,7 @@ static int dw_spi_ofdata_to_platdata(struct udevice *bus)
{
struct dw_spi_platdata *plat = bus->platdata;
- plat->regs = dev_read_addr_ptr(bus);
+ plat->regs = (struct dw_spi *)devfdt_get_addr(bus);
/* Use 500KHz as a suitable default */
plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c
index d338ff5a0b..746686a18a 100644
--- a/drivers/spi/exynos_spi.c
+++ b/drivers/spi/exynos_spi.c
@@ -257,7 +257,7 @@ static int exynos_spi_ofdata_to_platdata(struct udevice *bus)
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
- plat->regs = dev_read_addr_ptr(bus);
+ plat->regs = (struct exynos_spi *)devfdt_get_addr(bus);
plat->periph_id = pinmux_decode_periph_id(blob, node);
if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/fsl_dspi.c b/drivers/spi/fsl_dspi.c
index 9396c3826f..78ad61ca37 100644
--- a/drivers/spi/fsl_dspi.c
+++ b/drivers/spi/fsl_dspi.c
@@ -534,7 +534,7 @@ static int fsl_dspi_ofdata_to_platdata(struct udevice *bus)
plat->num_chipselect =
fdtdec_get_int(blob, node, "num-cs", FSL_DSPI_MAX_CHIPSELECT);
- addr = dev_read_addr(bus);
+ addr = devfdt_get_addr(bus);
if (addr == FDT_ADDR_T_NONE) {
debug("DSPI: Can't get base address or size\n");
return -ENOMEM;
diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
index dc7d2bc1f0..92dc2e13c5 100644
--- a/drivers/spi/kirkwood_spi.c
+++ b/drivers/spi/kirkwood_spi.c
@@ -236,7 +236,7 @@ static int mvebu_spi_ofdata_to_platdata(struct udevice *bus)
const struct mvebu_spi_dev *drvdata =
(struct mvebu_spi_dev *)dev_get_driver_data(bus);
- plat->spireg = dev_read_addr_ptr(bus);
+ plat->spireg = (struct kwspi_registers *)devfdt_get_addr(bus);
plat->is_errata_50mhz_ac = drvdata->is_errata_50mhz_ac;
return 0;
diff --git a/drivers/spi/mtk_snfi_spi.c b/drivers/spi/mtk_snfi_spi.c
index c30c8f4ff6..2a89476515 100644
--- a/drivers/spi/mtk_snfi_spi.c
+++ b/drivers/spi/mtk_snfi_spi.c
@@ -253,7 +253,7 @@ static int mtk_snfi_spi_probe(struct udevice *bus)
struct mtk_snfi_priv *priv = dev_get_priv(bus);
int ret;
- priv->base = dev_read_addr_ptr(bus);
+ priv->base = (void __iomem *)devfdt_get_addr(bus);
if (!priv->base)
return -EINVAL;
diff --git a/drivers/spi/mvebu_a3700_spi.c b/drivers/spi/mvebu_a3700_spi.c
index e860b9ec64..2302e62be4 100644
--- a/drivers/spi/mvebu_a3700_spi.c
+++ b/drivers/spi/mvebu_a3700_spi.c
@@ -255,7 +255,7 @@ static int mvebu_spi_ofdata_to_platdata(struct udevice *bus)
struct mvebu_spi_platdata *plat = dev_get_platdata(bus);
int ret;
- plat->spireg = dev_read_addr_ptr(bus);
+ plat->spireg = (struct spi_reg *)devfdt_get_addr(bus);
ret = clk_get_by_index(bus, 0, &plat->clk);
if (ret) {
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index e90a06a66d..aad3780365 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -537,7 +537,7 @@ static int mxc_spi_probe(struct udevice *bus)
}
}
- mxcs->base = dev_read_addr(bus);
+ mxcs->base = devfdt_get_addr(bus);
if (mxcs->base == FDT_ADDR_T_NONE)
return -ENODEV;
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index fbf9575851..39e6813469 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -488,7 +488,7 @@ static int omap3_spi_probe(struct udevice *dev)
struct omap2_mcspi_platform_config* data =
(struct omap2_mcspi_platform_config*)dev_get_driver_data(dev);
- priv->regs = (struct mcspi *)(dev_read_addr(dev) + data->regs_offset);
+ priv->regs = (struct mcspi *)(devfdt_get_addr(dev) + data->regs_offset);
if (fdtdec_get_bool(blob, node, "ti,pindir-d0-out-d1-in"))
priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
else
diff --git a/drivers/spi/spi-sunxi.c b/drivers/spi/spi-sunxi.c
index cd2e17bfd1..d2dccd67e5 100644
--- a/drivers/spi/spi-sunxi.c
+++ b/drivers/spi/spi-sunxi.c
@@ -519,7 +519,7 @@ static int sun4i_spi_ofdata_to_platdata(struct udevice *bus)
struct sun4i_spi_platdata *plat = dev_get_platdata(bus);
int node = dev_of_offset(bus);
- plat->base = dev_read_addr(bus);
+ plat->base = devfdt_get_addr(bus);
plat->variant = (struct sun4i_spi_variant *)dev_get_driver_data(bus);
plat->max_hz = fdtdec_get_int(gd->fdt_blob, node,
"spi-max-frequency",
diff --git a/drivers/spi/tegra20_sflash.c b/drivers/spi/tegra20_sflash.c
index 771744dfe4..22a0304bfc 100644
--- a/drivers/spi/tegra20_sflash.c
+++ b/drivers/spi/tegra20_sflash.c
@@ -93,7 +93,7 @@ static int tegra20_sflash_ofdata_to_platdata(struct udevice *bus)
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
- plat->base = dev_read_addr(bus);
+ plat->base = devfdt_get_addr(bus);
plat->periph_id = clock_decode_periph_id(bus);
if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/tegra20_slink.c b/drivers/spi/tegra20_slink.c
index f9846ee366..3679cf06a0 100644
--- a/drivers/spi/tegra20_slink.c
+++ b/drivers/spi/tegra20_slink.c
@@ -99,7 +99,7 @@ static int tegra30_spi_ofdata_to_platdata(struct udevice *bus)
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
- plat->base = dev_read_addr(bus);
+ plat->base = devfdt_get_addr(bus);
plat->periph_id = clock_decode_periph_id(bus);
if (plat->periph_id == PERIPH_ID_NONE) {
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index 5fdbb49442..0db0de8f1b 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -461,7 +461,7 @@ static int ti_qspi_ofdata_to_platdata(struct udevice *bus)
fdt_addr_t mmap_size;
priv->ctrl_mod_mmap = map_syscon_chipselects(bus);
- priv->base = map_physmem(dev_read_addr(bus),
+ priv->base = map_physmem(devfdt_get_addr(bus),
sizeof(struct ti_qspi_regs), MAP_NOCACHE);
mmap_addr = devfdt_get_addr_size_index(bus, 1, &mmap_size);
priv->memory_map = map_physmem(mmap_addr, mmap_size, MAP_NOCACHE);
diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index 9923931e36..78ffd3e2fe 100644
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -77,7 +77,7 @@ static int zynq_spi_ofdata_to_platdata(struct udevice *bus)
const void *blob = gd->fdt_blob;
int node = dev_of_offset(bus);
- plat->regs = dev_read_addr_ptr(bus);
+ plat->regs = (struct zynq_spi_regs *)devfdt_get_addr(bus);
/* FIXME: Use 250MHz as a suitable default */
plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
diff --git a/drivers/spi/zynqmp_gqspi.c b/drivers/spi/zynqmp_gqspi.c
index a72986be90..c3a5b3e301 100644
--- a/drivers/spi/zynqmp_gqspi.c
+++ b/drivers/spi/zynqmp_gqspi.c
@@ -181,10 +181,10 @@ static int zynqmp_qspi_ofdata_to_platdata(struct udevice *bus)
debug("%s\n", __func__);
- plat->regs = (struct zynqmp_qspi_regs *)(dev_read_addr(bus) +
+ plat->regs = (struct zynqmp_qspi_regs *)(devfdt_get_addr(bus) +
GQSPI_REG_OFFSET);
plat->dma_regs = (struct zynqmp_qspi_dma_regs *)
- (dev_read_addr(bus) + GQSPI_DMA_REG_OFFSET);
+ (devfdt_get_addr(bus) + GQSPI_DMA_REG_OFFSET);
return 0;
}
diff --git a/drivers/spmi/spmi-msm.c b/drivers/spmi/spmi-msm.c
index 2f430aed9c..ed93faffcb 100644
--- a/drivers/spmi/spmi-msm.c
+++ b/drivers/spmi/spmi-msm.c
@@ -156,7 +156,7 @@ static int msm_spmi_probe(struct udevice *dev)
bool is_v1;
int i;
- priv->arb_chnl = dev_read_addr(dev);
+ priv->arb_chnl = devfdt_get_addr(dev);
priv->spmi_core = fdtdec_get_addr_size_auto_parent(gd->fdt_blob,
dev_of_offset(parent), node, "reg", 1, NULL, false);
priv->spmi_obs = fdtdec_get_addr_size_auto_parent(gd->fdt_blob,
diff --git a/drivers/timer/ag101p_timer.c b/drivers/timer/ag101p_timer.c
index c011906b93..6e20b4fc33 100644
--- a/drivers/timer/ag101p_timer.c
+++ b/drivers/timer/ag101p_timer.c
@@ -92,7 +92,7 @@ static int atftmr_timer_probe(struct udevice *dev)
static int atftme_timer_ofdata_to_platdata(struct udevice *dev)
{
struct atftmr_timer_platdata *plat = dev_get_platdata(dev);
- plat->regs = map_physmem(dev_read_addr(dev),
+ plat->regs = map_physmem(devfdt_get_addr(dev),
sizeof(struct atftmr_timer_regs),
MAP_NOCACHE);
return 0;
diff --git a/drivers/timer/altera_timer.c b/drivers/timer/altera_timer.c
index 6cb2923e0b..6ca9501eb1 100644
--- a/drivers/timer/altera_timer.c
+++ b/drivers/timer/altera_timer.c
@@ -69,7 +69,7 @@ static int altera_timer_ofdata_to_platdata(struct udevice *dev)
{
struct altera_timer_platdata *plat = dev_get_platdata(dev);
- plat->regs = map_physmem(dev_read_addr(dev),
+ plat->regs = map_physmem(devfdt_get_addr(dev),
sizeof(struct altera_timer_regs),
MAP_NOCACHE);
diff --git a/drivers/timer/atcpit100_timer.c b/drivers/timer/atcpit100_timer.c
index 5d4ae68509..c5d43b4a4a 100644
--- a/drivers/timer/atcpit100_timer.c
+++ b/drivers/timer/atcpit100_timer.c
@@ -89,7 +89,7 @@ static int atcpit_timer_probe(struct udevice *dev)
static int atcpit_timer_ofdata_to_platdata(struct udevice *dev)
{
struct atcpit_timer_platdata *plat = dev_get_platdata(dev);
- plat->regs = map_physmem(dev_read_addr(dev), 0x100 , MAP_NOCACHE);
+ plat->regs = map_physmem(devfdt_get_addr(dev) , 0x100 , MAP_NOCACHE);
return 0;
}
diff --git a/drivers/timer/omap-timer.c b/drivers/timer/omap-timer.c
index cf3d27b96b..700c349f37 100644
--- a/drivers/timer/omap-timer.c
+++ b/drivers/timer/omap-timer.c
@@ -79,7 +79,7 @@ static int omap_timer_ofdata_to_platdata(struct udevice *dev)
{
struct omap_timer_priv *priv = dev_get_priv(dev);
- priv->regs = map_physmem(dev_read_addr(dev),
+ priv->regs = map_physmem(devfdt_get_addr(dev),
sizeof(struct omap_gptimer_regs), MAP_NOCACHE);
return 0;
diff --git a/drivers/usb/dwc3/dwc3-uniphier.c b/drivers/usb/dwc3/dwc3-uniphier.c
index 54b52dcd66..88317b19ac 100644
--- a/drivers/usb/dwc3/dwc3-uniphier.c
+++ b/drivers/usb/dwc3/dwc3-uniphier.c
@@ -70,7 +70,7 @@ static int uniphier_dwc3_probe(struct udevice *dev)
int (*init)(void __iomem *regs);
int ret;
- base = dev_read_addr(dev);
+ base = devfdt_get_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 3b208e8eb2..f9083d9a64 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -95,7 +95,7 @@ static int ehci_atmel_probe(struct udevice *dev)
/*
* Get the base address for EHCI controller from the device node
*/
- hcd_base = dev_read_addr(dev);
+ hcd_base = devfdt_get_addr(dev);
if (hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the EHCI register base address\n");
return -ENXIO;
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 6a37c5d982..0b0b2137c7 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -53,7 +53,7 @@ static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
/*
* Get the base address for XHCI controller from the device node
*/
- plat->hcd_base = dev_read_addr(dev);
+ plat->hcd_base = devfdt_get_addr(dev);
if (plat->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the XHCI register base address\n");
return -ENXIO;
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 5423d10abe..ac6c5b5845 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -105,7 +105,7 @@ static int ehci_fsl_probe(struct udevice *dev)
/*
* Get the base address for EHCI controller from the device node
*/
- priv->hcd_base = dev_read_addr(dev);
+ priv->hcd_base = devfdt_get_addr(dev);
if (priv->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the EHCI register base address\n");
return -ENXIO;
diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c
index 62414bb110..8fe685af26 100644
--- a/drivers/usb/host/ehci-marvell.c
+++ b/drivers/usb/host/ehci-marvell.c
@@ -109,7 +109,7 @@ static int ehci_mvebu_probe(struct udevice *dev)
/*
* Get the base address for EHCI controller from the device node
*/
- priv->hcd_base = dev_read_addr(dev);
+ priv->hcd_base = devfdt_get_addr(dev);
if (priv->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the EHCI register base address\n");
return -ENXIO;
diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c
index caafa68899..212b362332 100644
--- a/drivers/usb/host/ehci-mx5.c
+++ b/drivers/usb/host/ehci-mx5.c
@@ -306,7 +306,7 @@ static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
static int ehci_usb_probe(struct udevice *dev)
{
struct usb_platdata *plat = dev_get_platdata(dev);
- struct usb_ehci *ehci = dev_read_addr_ptr(dev);
+ struct usb_ehci *ehci = (struct usb_ehci *)devfdt_get_addr(dev);
struct ehci_mx5_priv_data *priv = dev_get_priv(dev);
enum usb_init_type type = plat->init_type;
struct ehci_hccr *hccr;
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 37b59758bb..5f84c7b91d 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -473,7 +473,7 @@ static const struct ehci_ops mx6_ehci_ops = {
static int ehci_usb_phy_mode(struct udevice *dev)
{
struct usb_platdata *plat = dev_get_platdata(dev);
- void *__iomem addr = dev_read_addr_ptr(dev);
+ void *__iomem addr = (void *__iomem)devfdt_get_addr(dev);
void *__iomem phy_ctrl, *__iomem phy_status;
const void *blob = gd->fdt_blob;
int offset = dev_of_offset(dev), phy_off;
@@ -580,7 +580,7 @@ static int ehci_usb_bind(struct udevice *dev)
static int ehci_usb_probe(struct udevice *dev)
{
struct usb_platdata *plat = dev_get_platdata(dev);
- struct usb_ehci *ehci = dev_read_addr_ptr(dev);
+ struct usb_ehci *ehci = (struct usb_ehci *)devfdt_get_addr(dev);
struct ehci_mx6_priv_data *priv = dev_get_priv(dev);
enum usb_init_type type = plat->init_type;
struct ehci_hccr *hccr;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 82b99eeef1..93ab83941d 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -382,7 +382,7 @@ static int omap_ehci_probe(struct udevice *dev)
struct ehci_hccr *hccr;
struct ehci_hcor *hcor;
- priv->ehci = dev_read_addr_ptr(dev);
+ priv->ehci = (struct omap_ehci *)devfdt_get_addr(dev);
priv->portnr = dev->seq;
priv->init_type = plat->init_type;
diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c
index 2768d40974..562207d3d2 100644
--- a/drivers/usb/host/ehci-vf.c
+++ b/drivers/usb/host/ehci-vf.c
@@ -224,7 +224,7 @@ static int vf_usb_ofdata_to_platdata(struct udevice *dev)
priv->portnr = dev->seq;
- priv->ehci = dev_read_addr_ptr(dev);
+ priv->ehci = (struct usb_ehci *)devfdt_get_addr(dev);
mode = fdt_getprop(dt_blob, node, "dr_mode", NULL);
if (mode) {
if (0 == strcmp(mode, "host")) {
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 22e7b565b5..692018243c 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -89,7 +89,7 @@ int usb_cpu_init_fail(void)
#if CONFIG_IS_ENABLED(DM_USB)
static int ohci_da8xx_probe(struct udevice *dev)
{
- struct ohci_regs *regs = dev_read_addr_ptr(dev);
+ struct ohci_regs *regs = (struct ohci_regs *)devfdt_get_addr(dev);
struct da8xx_ohci *priv = dev_get_priv(dev);
int i, err, ret, clock_nb;
diff --git a/drivers/usb/host/ohci-generic.c b/drivers/usb/host/ohci-generic.c
index b84bf8ac0f..631711a9e8 100644
--- a/drivers/usb/host/ohci-generic.c
+++ b/drivers/usb/host/ohci-generic.c
@@ -79,7 +79,7 @@ static int ohci_shutdown_phy(struct udevice *dev)
static int ohci_usb_probe(struct udevice *dev)
{
- struct ohci_regs *regs = dev_read_addr_ptr(dev);
+ struct ohci_regs *regs = (struct ohci_regs *)devfdt_get_addr(dev);
struct generic_ohci *priv = dev_get_priv(dev);
int i, err, ret, clock_nb, reset_nb;
diff --git a/drivers/usb/host/xhci-exynos5.c b/drivers/usb/host/xhci-exynos5.c
index 6fb7a7f6e0..1705accbde 100644
--- a/drivers/usb/host/xhci-exynos5.c
+++ b/drivers/usb/host/xhci-exynos5.c
@@ -62,7 +62,7 @@ static int xhci_usb_ofdata_to_platdata(struct udevice *dev)
/*
* Get the base address for XHCI controller from the device node
*/
- plat->hcd_base = dev_read_addr(dev);
+ plat->hcd_base = devfdt_get_addr(dev);
if (plat->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the XHCI register base address\n");
return -ENXIO;
diff --git a/drivers/usb/host/xhci-fsl.c b/drivers/usb/host/xhci-fsl.c
index 0a2da70e20..d8fb2c5345 100644
--- a/drivers/usb/host/xhci-fsl.c
+++ b/drivers/usb/host/xhci-fsl.c
@@ -120,7 +120,7 @@ static int xhci_fsl_probe(struct udevice *dev)
/*
* Get the base address for XHCI controller from the device node
*/
- priv->hcd_base = dev_read_addr(dev);
+ priv->hcd_base = devfdt_get_addr(dev);
if (priv->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the XHCI register base address\n");
return -ENXIO;
diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
index f2e338f6fb..5fb74848c2 100644
--- a/drivers/usb/host/xhci-mvebu.c
+++ b/drivers/usb/host/xhci-mvebu.c
@@ -72,7 +72,7 @@ static int xhci_usb_ofdata_to_platdata(struct udevice *dev)
/*
* Get the base address for XHCI controller from the device node
*/
- plat->hcd_base = dev_read_addr(dev);
+ plat->hcd_base = devfdt_get_addr(dev);
if (plat->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the XHCI register base address\n");
return -ENXIO;
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index 8fc51df3d1..4964697f27 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -136,7 +136,7 @@ static int xhci_rcar_ofdata_to_platdata(struct udevice *dev)
{
struct rcar_xhci_platdata *plat = dev_get_platdata(dev);
- plat->hcd_base = dev_read_addr(dev);
+ plat->hcd_base = devfdt_get_addr(dev);
if (plat->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the XHCI register base address\n");
return -ENXIO;
diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c
index 38def2816b..35a56a8eab 100644
--- a/drivers/video/atmel_hlcdfb.c
+++ b/drivers/video/atmel_hlcdfb.c
@@ -507,7 +507,7 @@ static int atmel_hlcdc_ofdata_to_platdata(struct udevice *dev)
const void *blob = gd->fdt_blob;
int node = dev_of_offset(dev);
- priv->regs = dev_read_addr_ptr(dev);
+ priv->regs = (struct atmel_hlcd_regs *)devfdt_get_addr(dev);
if (!priv->regs) {
debug("%s: No display controller address\n", __func__);
return -EINVAL;
diff --git a/drivers/video/exynos/exynos_dp.c b/drivers/video/exynos/exynos_dp.c
index 999ee1c14a..749bde862e 100644
--- a/drivers/video/exynos/exynos_dp.c
+++ b/drivers/video/exynos/exynos_dp.c
@@ -884,7 +884,7 @@ static int exynos_dp_ofdata_to_platdata(struct udevice *dev)
unsigned int node = dev_of_offset(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE) {
debug("Can't get the DP base address\n");
return -EINVAL;
diff --git a/drivers/video/exynos/exynos_fb.c b/drivers/video/exynos/exynos_fb.c
index 979b909182..d5b13a6723 100644
--- a/drivers/video/exynos/exynos_fb.c
+++ b/drivers/video/exynos/exynos_fb.c
@@ -486,7 +486,7 @@ int exynos_fb_ofdata_to_platdata(struct udevice *dev)
const void *blob = gd->fdt_blob;
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE) {
debug("Can't get the FIMD base address\n");
return -EINVAL;
diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
index 827ea13d13..1208d91286 100644
--- a/drivers/video/tegra.c
+++ b/drivers/video/tegra.c
@@ -346,7 +346,7 @@ static int tegra_lcd_ofdata_to_platdata(struct udevice *dev)
int rgb;
int ret;
- priv->disp = dev_read_addr_ptr(dev);
+ priv->disp = (struct disp_ctlr *)devfdt_get_addr(dev);
if (!priv->disp) {
debug("%s: No display controller address\n", __func__);
return -EINVAL;
diff --git a/drivers/w1/mxc_w1.c b/drivers/w1/mxc_w1.c
index 8e6372f0be..5bf08653a9 100644
--- a/drivers/w1/mxc_w1.c
+++ b/drivers/w1/mxc_w1.c
@@ -171,7 +171,7 @@ static int mxc_w1_ofdata_to_platdata(struct udevice *dev)
struct mxc_w1_pdata *pdata = dev_get_platdata(dev);
fdt_addr_t addr;
- addr = dev_read_addr(dev);
+ addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 9059a4c610..ed8b2199c2 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -237,7 +237,7 @@ static int omap3_wdt_probe(struct udevice *dev)
{
struct omap3_wdt_priv *priv = dev_get_priv(dev);
- priv->regs = dev_read_addr_ptr(dev);
+ priv->regs = (struct wd_timer *)devfdt_get_addr(dev);
if (!priv->regs)
return -EINVAL;
diff --git a/drivers/watchdog/stm32mp_wdt.c b/drivers/watchdog/stm32mp_wdt.c
index f673fce327..2d8bfc09a0 100644
--- a/drivers/watchdog/stm32mp_wdt.c
+++ b/drivers/watchdog/stm32mp_wdt.c
@@ -92,7 +92,7 @@ static int stm32mp_wdt_probe(struct udevice *dev)
debug("IWDG init\n");
- priv->base = dev_read_addr(dev);
+ priv->base = devfdt_get_addr(dev);
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
diff --git a/include/cpu.h b/include/cpu.h
index 78e88b9ed0..2f283fe244 100644
--- a/include/cpu.h
+++ b/include/cpu.h
@@ -61,7 +61,7 @@ struct cpu_ops {
* @size: Size of string space
* @return 0 if OK, -ENOSPC if buffer is too small, other -ve on error
*/
- int (*get_desc)(const struct udevice *dev, char *buf, int size);
+ int (*get_desc)(struct udevice *dev, char *buf, int size);
/**
* get_info() - Get information about a CPU
@@ -70,7 +70,7 @@ struct cpu_ops {
* @info: Returns CPU info
* @return 0 if OK, -ve on error
*/
- int (*get_info)(const struct udevice *dev, struct cpu_info *info);
+ int (*get_info)(struct udevice *dev, struct cpu_info *info);
/**
* get_count() - Get number of CPUs
@@ -78,7 +78,7 @@ struct cpu_ops {
* @dev: Device to check (UCLASS_CPU)
* @return CPU count if OK, -ve on error
*/
- int (*get_count)(const struct udevice *dev);
+ int (*get_count)(struct udevice *dev);
/**
* get_vendor() - Get vendor name of a CPU
@@ -88,7 +88,7 @@ struct cpu_ops {
* @size: Size of string space
* @return 0 if OK, -ENOSPC if buffer is too small, other -ve on error
*/
- int (*get_vendor)(const struct udevice *dev, char *buf, int size);
+ int (*get_vendor)(struct udevice *dev, char *buf, int size);
/**
* is_current() - Check if the CPU that U-Boot is currently running from
@@ -110,7 +110,7 @@ struct cpu_ops {
*
* Return: 0 if OK, -ENOSPC if buffer is too small, other -ve on error
*/
-int cpu_get_desc(const struct udevice *dev, char *buf, int size);
+int cpu_get_desc(struct udevice *dev, char *buf, int size);
/**
* cpu_get_info() - Get information about a CPU
@@ -119,7 +119,7 @@ int cpu_get_desc(const struct udevice *dev, char *buf, int size);
*
* Return: 0 if OK, -ve on error
*/
-int cpu_get_info(const struct udevice *dev, struct cpu_info *info);
+int cpu_get_info(struct udevice *dev, struct cpu_info *info);
/**
* cpu_get_count() - Get number of CPUs
@@ -127,7 +127,7 @@ int cpu_get_info(const struct udevice *dev, struct cpu_info *info);
*
* Return: CPU count if OK, -ve on error
*/
-int cpu_get_count(const struct udevice *dev);
+int cpu_get_count(struct udevice *dev);
/**
* cpu_get_vendor() - Get vendor name of a CPU
@@ -137,7 +137,7 @@ int cpu_get_count(const struct udevice *dev);
*
* Return: 0 if OK, -ENOSPC if buffer is too small, other -ve on error
*/
-int cpu_get_vendor(const struct udevice *dev, char *buf, int size);
+int cpu_get_vendor(struct udevice *dev, char *buf, int size);
/**
* cpu_probe_all() - Probe all available CPUs
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 690a8ed4df..7837d459f1 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -97,7 +97,6 @@ enum uclass_id {
UCLASS_SERIAL, /* Serial UART */
UCLASS_SIMPLE_BUS, /* Bus with child devices */
UCLASS_SMEM, /* Shared memory interface */
- UCLASS_SOC, /* SOC Device */
UCLASS_SOUND, /* Playing simple sounds */
UCLASS_SPI, /* SPI bus */
UCLASS_SPI_FLASH, /* SPI flash */
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 760b392bdf..abd6d42671 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -909,6 +909,26 @@ int fdtdec_decode_display_timing(const void *blob, int node, int index,
struct display_timing *config);
/**
+ * fdtdec_setup_mem_size_base_fdt() - decode and setup gd->ram_size and
+ * gd->ram_start
+ *
+ * Decode the /memory 'reg' property to determine the size and start of the
+ * first memory bank, populate the global data with the size and start of the
+ * first bank of memory.
+ *
+ * This function should be called from a boards dram_init(). This helper
+ * function allows for boards to query the device tree for DRAM size and start
+ * address instead of hard coding the value in the case where the memory size
+ * and start address cannot be detected automatically.
+ *
+ * @param blob FDT blob
+ *
+ * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or
+ * invalid
+ */
+int fdtdec_setup_mem_size_base_fdt(const void *blob);
+
+/**
* fdtdec_setup_mem_size_base() - decode and setup gd->ram_size and
* gd->ram_start
*
@@ -927,6 +947,25 @@ int fdtdec_decode_display_timing(const void *blob, int node, int index,
int fdtdec_setup_mem_size_base(void);
/**
+ * fdtdec_setup_memory_banksize_fdt() - decode and populate gd->bd->bi_dram
+ *
+ * Decode the /memory 'reg' property to determine the address and size of the
+ * memory banks. Use this data to populate the global data board info with the
+ * phys address and size of memory banks.
+ *
+ * This function should be called from a boards dram_init_banksize(). This
+ * helper function allows for boards to query the device tree for memory bank
+ * information instead of hard coding the information in cases where it cannot
+ * be detected automatically.
+ *
+ * @param blob FDT blob
+ *
+ * @return 0 if OK, -EINVAL if the /memory node or reg property is missing or
+ * invalid
+ */
+int fdtdec_setup_memory_banksize_fdt(const void *blob);
+
+/**
* fdtdec_setup_memory_banksize() - decode and populate gd->bd->bi_dram
*
* Decode the /memory 'reg' property to determine the address and size of the
diff --git a/include/soc.h b/include/soc.h
deleted file mode 100644
index a55eb1b572..0000000000
--- a/include/soc.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2020 - Texas Instruments Incorporated - http://www.ti.com/
- * Dave Gerlach <d-gerlach@ti.com>
- */
-
-#ifndef __SOC_H
-#define __SOC_H
-
-#define SOC_MAX_STR_SIZE 128
-
-/**
- * struct soc_attr - Contains SoC identify information to be used in
- * SoC matching. An array of these structs
- * representing different SoCs can be passed to
- * soc_device_match and the struct matching the SoC
- * in use will be returned.
- *
- * @family - Name of SoC family that can include multiple related SoC
- * variants. Example: am33
- * @machine - Name of a specific SoC. Example: am3352
- * @revision - Name of a specific SoC revision. Example: SR1.1
- * @data - A pointer to user data for the SoC variant
- */
-struct soc_attr {
- const char *family;
- const char *machine;
- const char *revision;
- const void *data;
-};
-
-struct soc_ops {
- /**
- * get_machine() - Get machine name of an SOC
- *
- * @dev: Device to check (UCLASS_SOC)
- * @buf: Buffer to place string
- * @size: Size of string space
- * @return 0 if OK, -ENOSPC if buffer is too small, other -ve on error
- */
- int (*get_machine)(struct udevice *dev, char *buf, int size);
-
- /**
- * get_revision() - Get revision name of a SOC
- *
- * @dev: Device to check (UCLASS_SOC)
- * @buf: Buffer to place string
- * @size: Size of string space
- * @return 0 if OK, -ENOSPC if buffer is too small, other -ve on error
- */
- int (*get_revision)(struct udevice *dev, char *buf, int size);
-
- /**
- * get_family() - Get family name of an SOC
- *
- * @dev: Device to check (UCLASS_SOC)
- * @buf: Buffer to place string
- * @size: Size of string space
- * @return 0 if OK, -ENOSPC if buffer is too small, other -ve on error
- */
- int (*get_family)(struct udevice *dev, char *buf, int size);
-};
-
-#define soc_get_ops(dev) ((struct soc_ops *)(dev)->driver->ops)
-
-#ifdef CONFIG_SOC_DEVICE
-/**
- * soc_get() - Return the soc device for the soc in use.
- * @devp: Pointer to structure to receive the soc device.
- *
- * Since there can only be at most one SOC instance, the API can supply a
- * function that returns the unique device.
- *
- * Return: 0 if OK, -ve on error.
- */
-int soc_get(struct udevice **devp);
-
-/**
- * soc_get_machine() - Get machine name of an SOC
- * @dev: Device to check (UCLASS_SOC)
- * @buf: Buffer to place string
- * @size: Size of string space
- *
- * Return: 0 if OK, -ENOSPC if buffer is too small, other -ve on error
- */
-int soc_get_machine(struct udevice *dev, char *buf, int size);
-
-/**
- * soc_get_revision() - Get revision name of an SOC
- * @dev: Device to check (UCLASS_SOC)
- * @buf: Buffer to place string
- * @size: Size of string space
- *
- * Return: 0 if OK, -ENOSPC if buffer is too small, other -ve on error
- */
-int soc_get_revision(struct udevice *dev, char *buf, int size);
-
-/**
- * soc_get_family() - Get family name of an SOC
- * @dev: Device to check (UCLASS_SOC)
- * @buf: Buffer to place string
- * @size: Size of string space
- *
- * Return: 0 if OK, -ENOSPC if buffer is too small, other -ve on error
- */
-int soc_get_family(struct udevice *dev, char *buf, int size);
-
-/**
- * soc_device_match() - Return match from an array of soc_attr
- * @matches: Array with any combination of family, revision or machine set
- *
- * Return: Pointer to struct from matches array with set attributes matching
- * those provided by the soc device, or NULL if no match found.
- */
-const struct soc_attr *
-soc_device_match(const struct soc_attr *matches);
-
-#else
-static inline int soc_get(struct udevice **devp)
-{
- return -ENOSYS;
-}
-
-static inline int soc_get_machine(struct udevice *dev, char *buf, int size)
-{
- return -ENOSYS;
-}
-
-static inline int soc_get_revision(struct udevice *dev, char *buf, int size)
-{
- return -ENOSYS;
-}
-
-static inline int soc_get_family(struct udevice *dev, char *buf, int size)
-{
- return -ENOSYS;
-}
-
-static inline const struct soc_attr *
-soc_device_match(const struct soc_attr *matches)
-{
- return NULL;
-}
-#endif
-#endif /* _SOC_H */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 78576b530f..934944d97f 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -1030,18 +1030,18 @@ int fdtdec_decode_display_timing(const void *blob, int parent, int index,
return ret;
}
-int fdtdec_setup_mem_size_base(void)
+int fdtdec_setup_mem_size_base_fdt(const void *blob)
{
int ret, mem;
struct fdt_resource res;
- mem = fdt_path_offset(gd->fdt_blob, "/memory");
+ mem = fdt_path_offset(blob, "/memory");
if (mem < 0) {
debug("%s: Missing /memory node\n", __func__);
return -EINVAL;
}
- ret = fdt_get_resource(gd->fdt_blob, mem, "reg", 0, &res);
+ ret = fdt_get_resource(blob, mem, "reg", 0, &res);
if (ret != 0) {
debug("%s: Unable to decode first memory bank\n", __func__);
return -EINVAL;
@@ -1055,38 +1055,43 @@ int fdtdec_setup_mem_size_base(void)
return 0;
}
+int fdtdec_setup_mem_size_base(void)
+{
+ return fdtdec_setup_mem_size_base_fdt(gd->fdt_blob);
+}
+
#if defined(CONFIG_NR_DRAM_BANKS)
static int get_next_memory_node(const void *blob, int mem)
{
do {
- mem = fdt_node_offset_by_prop_value(gd->fdt_blob, mem,
+ mem = fdt_node_offset_by_prop_value(blob, mem,
"device_type", "memory", 7);
} while (!fdtdec_get_is_enabled(blob, mem));
return mem;
}
-int fdtdec_setup_memory_banksize(void)
+int fdtdec_setup_memory_banksize_fdt(const void *blob)
{
int bank, ret, mem, reg = 0;
struct fdt_resource res;
- mem = get_next_memory_node(gd->fdt_blob, -1);
+ mem = get_next_memory_node(blob, -1);
if (mem < 0) {
debug("%s: Missing /memory node\n", __func__);
return -EINVAL;
}
for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res);
+ ret = fdt_get_resource(blob, mem, "reg", reg++, &res);
if (ret == -FDT_ERR_NOTFOUND) {
reg = 0;
- mem = get_next_memory_node(gd->fdt_blob, mem);
+ mem = get_next_memory_node(blob, mem);
if (mem == -FDT_ERR_NOTFOUND)
break;
- ret = fdt_get_resource(gd->fdt_blob, mem, "reg", reg++, &res);
+ ret = fdt_get_resource(blob, mem, "reg", reg++, &res);
if (ret == -FDT_ERR_NOTFOUND)
break;
}
@@ -1106,6 +1111,12 @@ int fdtdec_setup_memory_banksize(void)
return 0;
}
+
+int fdtdec_setup_memory_banksize(void)
+{
+ return fdtdec_setup_memory_banksize_fdt(gd->fdt_blob);
+
+}
#endif
#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
diff --git a/scripts/dtc/pylibfdt/Makefile b/scripts/dtc/pylibfdt/Makefile
index 80b6ad2ae7..42342c75bb 100644
--- a/scripts/dtc/pylibfdt/Makefile
+++ b/scripts/dtc/pylibfdt/Makefile
@@ -24,9 +24,6 @@ quiet_cmd_pymod = PYMOD $@
$(PYTHON3) $< --quiet build_ext --inplace
$(obj)/_libfdt.so: $(src)/setup.py $(PYLIBFDT_srcs) FORCE
- @# Remove the library since otherwise Python doesn't seem to regenerate
- @# the libfdt.py file if it is missing.
- rm -f $(obj)/_libfdt*.so
$(call if_changed,pymod)
always += _libfdt.so
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 839111791b..b03c96da06 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -68,7 +68,6 @@ obj-$(CONFIG_AXI) += axi.o
obj-$(CONFIG_MISC) += misc.o
obj-$(CONFIG_DM_SERIAL) += serial.o
obj-$(CONFIG_CPU) += cpu.o
-obj-$(CONFIG_SOC_DEVICE) += soc.o
obj-$(CONFIG_SOUND) += sound.o
obj-$(CONFIG_TEE) += tee.o
obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o
diff --git a/test/dm/acpi.c b/test/dm/acpi.c
index bb8550ffb1..b94c4ba4d1 100644
--- a/test/dm/acpi.c
+++ b/test/dm/acpi.c
@@ -190,10 +190,7 @@ DM_TEST(dm_test_acpi_get_table_revision,
static int dm_test_acpi_create_dmar(struct unit_test_state *uts)
{
struct acpi_dmar dmar;
- struct udevice *cpu;
- ut_assertok(uclass_first_device(UCLASS_CPU, &cpu));
- ut_assertnonnull(cpu);
ut_assertok(acpi_create_dmar(&dmar, DMAR_INTR_REMAP));
ut_asserteq(DMAR_INTR_REMAP, dmar.flags);
ut_asserteq(32 - 1, dmar.host_address_width);
diff --git a/test/dm/core.c b/test/dm/core.c
index d20c48443f..6a930ae31a 100644
--- a/test/dm/core.c
+++ b/test/dm/core.c
@@ -158,7 +158,7 @@ static int dm_test_autobind_uclass_pdata_alloc(struct unit_test_state *uts)
for (uclass_find_first_device(UCLASS_TEST, &dev);
dev;
uclass_find_next_device(&dev)) {
- ut_assertnonnull(dev);
+ ut_assert(dev);
uc_pdata = dev_get_uclass_platdata(dev);
ut_assert(uc_pdata);
@@ -181,7 +181,7 @@ static int dm_test_autobind_uclass_pdata_valid(struct unit_test_state *uts)
for (uclass_find_first_device(UCLASS_TEST, &dev);
dev;
uclass_find_next_device(&dev)) {
- ut_assertnonnull(dev);
+ ut_assert(dev);
uc_pdata = dev_get_uclass_platdata(dev);
ut_assert(uc_pdata);
@@ -747,11 +747,11 @@ static int dm_test_uclass_devices_find(struct unit_test_state *uts)
dev;
ret = uclass_find_next_device(&dev)) {
ut_assert(!ret);
- ut_assertnonnull(dev);
+ ut_assert(dev);
}
ut_assertok(uclass_find_first_device(UCLASS_TEST_DUMMY, &dev));
- ut_assertnull(dev);
+ ut_assert(!dev);
return 0;
}
@@ -778,7 +778,7 @@ static int dm_test_uclass_devices_find_by_name(struct unit_test_state *uts)
testdev;
ret = uclass_find_next_device(&testdev)) {
ut_assertok(ret);
- ut_assertnonnull(testdev);
+ ut_assert(testdev);
findret = uclass_find_device_by_name(UCLASS_TEST_FDT,
testdev->name,
diff --git a/test/dm/devres.c b/test/dm/devres.c
index 550787495d..b5de0cb191 100644
--- a/test/dm/devres.c
+++ b/test/dm/devres.c
@@ -153,7 +153,6 @@ static int dm_test_devres_phase(struct unit_test_state *uts)
* allocation created in the bind() method.
*/
ut_assertok(uclass_find_first_device(UCLASS_TEST_DEVRES, &dev));
- ut_assertnonnull(dev);
devres_get_stats(dev, &stats);
ut_asserteq(1, stats.allocs);
ut_asserteq(TEST_DEVRES_SIZE, stats.total_size);
diff --git a/test/dm/soc.c b/test/dm/soc.c
deleted file mode 100644
index 3ad0f561f2..0000000000
--- a/test/dm/soc.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Test for the SOC uclass
- *
- * (C) Copyright 2020 - Texas Instruments Incorporated - http://www.ti.com/
- * Dave Gerlach <d-gerlach@ti.com>
- */
-
-#include <common.h>
-#include <dm.h>
-#include <dm/test.h>
-#include <dm/uclass-internal.h>
-#include <soc.h>
-#include <test/ut.h>
-
-struct sb_soc_data {
- unsigned long param;
-};
-
-static int dm_test_soc(struct unit_test_state *uts)
-{
- struct udevice *dev;
- char text[128];
- const struct soc_attr *soc_data;
- const struct sb_soc_data *match_data;
-
- static const struct sb_soc_data soc_sandbox1_sr10_data = { 0x91919191 };
- static const struct sb_soc_data soc_sandbox123_data = { 0x84848484 };
-
- static const struct soc_attr sb_soc_devices_full[] = {
- {
- .family = "SANDBOX0xx",
- .machine = "SANDBOX012",
- .revision = "1.0",
- .data = NULL,
- },
- {
- .family = "SANDBOX1xx",
- .machine = "SANDBOX107",
- .revision = "1.0",
- .data = NULL,
- },
- {
- .family = "SANDBOX1xx",
- .machine = "SANDBOX123",
- .revision = "1.0",
- .data = &soc_sandbox123_data,
- },
- {
- .family = "SANDBOX1xx",
- .machine = "SANDBOX131",
- .revision = "2.0",
- .data = NULL,
- },
- { /* sentinel */ }
- };
-
- static const struct soc_attr sb_soc_devices_partial[] = {
- {
- .family = "SANDBOX0xx",
- .revision = "1.0",
- .data = NULL,
- },
- {
- .family = "SANDBOX1xx",
- .revision = "1.0",
- .data = &soc_sandbox1_sr10_data,
- },
- {
- .family = "SANDBOX1xx",
- .revision = "2.0",
- .data = NULL,
- },
- { /* sentinel */ }
- };
-
- static const struct soc_attr sb_soc_devices_nomatch[] = {
- {
- .family = "SANDBOX0xx",
- .revision = "1.0",
- .data = NULL,
- },
- {
- .family = "SANDBOX1xx",
- .revision = "2.0",
- .data = NULL,
- },
- { /* sentinel */ }
- };
-
- ut_assertok(soc_get(&dev));
-
- ut_assertok(soc_get_machine(dev, text, sizeof(text)));
- ut_assertok(strcmp(text, "SANDBOX123"));
-
- ut_assertok(soc_get_family(dev, text, sizeof(text)));
- ut_assertok(strcmp(text, "SANDBOX1xx"));
-
- ut_assertok(soc_get_revision(dev, text, sizeof(text)));
- ut_asserteq_str(text, "1.0");
-
- soc_data = soc_device_match(sb_soc_devices_full);
- ut_assert(soc_data);
-
- match_data = soc_data->data;
- ut_asserteq(match_data->param, 0x84848484);
-
- soc_data = soc_device_match(sb_soc_devices_partial);
- ut_assert(soc_data);
-
- match_data = soc_data->data;
- ut_asserteq(match_data->param, 0x91919191);
-
- soc_data = soc_device_match(sb_soc_devices_nomatch);
- ut_asserteq_ptr(soc_data, NULL);
-
- return 0;
-}
-
-DM_TEST(dm_test_soc, DM_TESTF_SCAN_FDT);
diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c
index 8ef7c7a88e..51f2547409 100644
--- a/test/dm/test-fdt.c
+++ b/test/dm/test-fdt.c
@@ -832,12 +832,10 @@ static int dm_test_fdt_phandle(struct unit_test_state *uts)
struct udevice *back, *dev, *dev2;
ut_assertok(uclass_find_first_device(UCLASS_PANEL_BACKLIGHT, &back));
- ut_assertnonnull(back);
ut_asserteq(-ENOENT, uclass_find_device_by_phandle(UCLASS_REGULATOR,
back, "missing", &dev));
ut_assertok(uclass_find_device_by_phandle(UCLASS_REGULATOR, back,
"power-supply", &dev));
- ut_assertnonnull(dev);
ut_asserteq(0, device_active(dev));
ut_asserteq_str("ldo1", dev->name);
ut_assertok(uclass_get_device_by_phandle(UCLASS_REGULATOR, back,
diff --git a/test/dm/virtio.c b/test/dm/virtio.c
index 4a0c0b23b8..4b317d2ec3 100644
--- a/test/dm/virtio.c
+++ b/test/dm/virtio.c
@@ -22,11 +22,9 @@ static int dm_test_virtio_base(struct unit_test_state *uts)
/* check probe success */
ut_assertok(uclass_first_device(UCLASS_VIRTIO, &bus));
- ut_assertnonnull(bus);
/* check the child virtio-blk device is bound */
ut_assertok(device_find_first_child(bus, &dev));
- ut_assertnonnull(dev);
ut_assertok(strcmp(dev->name, "virtio-blk#0"));
/* check driver status */
@@ -51,18 +49,15 @@ static int dm_test_virtio_all_ops(struct unit_test_state *uts)
/* check probe success */
ut_assertok(uclass_first_device(UCLASS_VIRTIO, &bus));
- ut_assertnonnull(bus);
/* check the child virtio-blk device is bound */
ut_assertok(device_find_first_child(bus, &dev));
- ut_assertnonnull(dev);
/*
* fake the virtio device probe by filling in uc_priv->vdev
* which is used by virtio_find_vqs/virtio_del_vqs.
*/
uc_priv = dev_get_uclass_priv(bus);
- ut_assertnonnull(uc_priv);
uc_priv->vdev = dev;
/* test virtio_xxx APIs */
@@ -111,11 +106,9 @@ static int dm_test_virtio_remove(struct unit_test_state *uts)
/* check probe success */
ut_assertok(uclass_first_device(UCLASS_VIRTIO, &bus));
- ut_assertnonnull(bus);
/* check the child virtio-blk device is bound */
ut_assertok(device_find_first_child(bus, &dev));
- ut_assertnonnull(dev);
/* set driver status to VIRTIO_CONFIG_S_DRIVER_OK */
ut_assertok(virtio_set_status(dev, VIRTIO_CONFIG_S_DRIVER_OK));
diff --git a/test/run b/test/run
index de87e7530b..27331a8e40 100755
--- a/test/run
+++ b/test/run
@@ -48,7 +48,7 @@ export DTC=${DTC_DIR}/dtc
TOOLS_DIR=build-sandbox_spl/tools
run_test "binman" ./tools/binman/binman --toolpath ${TOOLS_DIR} test
-run_test "patman" ./tools/patman/patman test
+run_test "patman" ./tools/patman/patman --test
run_test "buildman" ./tools/buildman/buildman -t ${skip}
run_test "fdt" ./tools/dtoc/test_fdt -t
diff --git a/tools/binman/README.entries b/tools/binman/README.entries
index bf8edce02b..6a816bba6b 100644
--- a/tools/binman/README.entries
+++ b/tools/binman/README.entries
@@ -42,19 +42,6 @@ obtained from the list of available device-tree files, managed by the
-Entry: blob-ext: Entry containing an externally built binary blob
------------------------------------------------------------------
-
-Note: This should not be used by itself. It is normally used as a parent
-class by other entry types.
-
-If the file providing this blob is missing, binman can optionally ignore it
-and produce a broken image with a warning.
-
-See 'blob' for Properties / Entry arguments.
-
-
-
Entry: blob-named-by-arg: A blob entry which gets its filename property from its subclass
-----------------------------------------------------------------------------------------
@@ -311,46 +298,6 @@ byte value of a region.
-Entry: fit: Entry containing a FIT
-----------------------------------
-
-This calls mkimage to create a FIT (U-Boot Flat Image Tree) based on the
-input provided.
-
-Nodes for the FIT should be written out in the binman configuration just as
-they would be in a file passed to mkimage.
-
-For example, this creates an image containing a FIT with U-Boot SPL:
-
- binman {
- fit {
- description = "Test FIT";
-
- images {
- kernel@1 {
- description = "SPL";
- os = "u-boot";
- type = "rkspi";
- arch = "arm";
- compression = "none";
- load = <0>;
- entry = <0>;
-
- u-boot-spl {
- };
- };
- };
- };
- };
-
-Properties:
- fit,external-offset: Indicates that the contents of the FIT are external
- and provides the external offset. This is passsed to mkimage via
- the -E and -p flags.
-
-
-
-
Entry: fmap: An entry which contains an Fmap section
----------------------------------------------------
@@ -640,29 +587,6 @@ See README.x86 for information about Intel binary blobs.
-Entry: mkimage: Entry containing a binary produced by mkimage
--------------------------------------------------------------
-
-Properties / Entry arguments:
- - datafile: Filename for -d argument
- - args: Other arguments to pass
-
-The data passed to mkimage is collected from subnodes of the mkimage node,
-e.g.:
-
- mkimage {
- args = "-n test -T imximage";
-
- u-boot-spl {
- };
- };
-
-This calls mkimage to create an imximage with u-boot-spl.bin as the input
-file. The output from mkimage then becomes part of the image produced by
-binman.
-
-
-
Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code for U-Boot
-----------------------------------------------------------------------------------------
diff --git a/tools/binman/cmdline.py b/tools/binman/cmdline.py
index bb4d9d1288..1e38593579 100644
--- a/tools/binman/cmdline.py
+++ b/tools/binman/cmdline.py
@@ -53,8 +53,6 @@ controlled by a description in the board device tree.'''
help='Add a path to the list of directories to use for input files')
build_parser.add_argument('-m', '--map', action='store_true',
default=False, help='Output a map file for each image')
- build_parser.add_argument('-M', '--allow-missing', action='store_true',
- default=False, help='Allow external blobs to be missing')
build_parser.add_argument('-O', '--outdir', type=str,
action='store', help='Path to directory to use for intermediate and '
'output files')
diff --git a/tools/binman/control.py b/tools/binman/control.py
index 343b0a0c35..dc1dd2a7dc 100644
--- a/tools/binman/control.py
+++ b/tools/binman/control.py
@@ -387,7 +387,7 @@ def PrepareImagesAndDtbs(dtb_fname, select_images, update_fdt):
def ProcessImage(image, update_fdt, write_map, get_contents=True,
- allow_resize=True, allow_missing=False):
+ allow_resize=True):
"""Perform all steps for this image, including checking and # writing it.
This means that errors found with a later image will be reported after
@@ -402,13 +402,8 @@ def ProcessImage(image, update_fdt, write_map, get_contents=True,
the contents is already present
allow_resize: True to allow entries to change size (this does a re-pack
of the entries), False to raise an exception
- allow_missing: Allow blob_ext objects to be missing
-
- Returns:
- True if one or more external blobs are missing, False if all are present
"""
if get_contents:
- image.SetAllowMissing(allow_missing)
image.GetEntryContents()
image.GetEntryOffsets()
@@ -453,12 +448,6 @@ def ProcessImage(image, update_fdt, write_map, get_contents=True,
image.BuildImage()
if write_map:
image.WriteMap()
- missing_list = []
- image.CheckMissing(missing_list)
- if missing_list:
- tout.Warning("Image '%s' is missing external blobs and is non-functional: %s" %
- (image.name, ' '.join([e.name for e in missing_list])))
- return bool(missing_list)
def Binman(args):
@@ -533,17 +522,13 @@ def Binman(args):
images = PrepareImagesAndDtbs(dtb_fname, args.image,
args.update_fdt)
- missing = False
for image in images.values():
- missing |= ProcessImage(image, args.update_fdt, args.map,
- allow_missing=args.allow_missing)
+ ProcessImage(image, args.update_fdt, args.map)
# Write the updated FDTs to our output files
for dtb_item in state.GetAllFdts():
tools.WriteFile(dtb_item._fname, dtb_item.GetContents())
- if missing:
- tout.Warning("Some images are invalid")
finally:
tools.FinaliseOutputDir()
finally:
diff --git a/tools/binman/entry.py b/tools/binman/entry.py
index 3434a3f804..90ffd27617 100644
--- a/tools/binman/entry.py
+++ b/tools/binman/entry.py
@@ -84,7 +84,6 @@ class Entry(object):
self.image_pos = None
self._expand_size = False
self.compress = 'none'
- self.missing = False
@staticmethod
def Lookup(node_path, etype):
@@ -795,23 +794,3 @@ features to produce new behaviours.
elif self == entries[-1]:
return 'end'
return 'middle'
-
- def SetAllowMissing(self, allow_missing):
- """Set whether a section allows missing external blobs
-
- Args:
- allow_missing: True if allowed, False if not allowed
- """
- # This is meaningless for anything other than sections
- pass
-
- def CheckMissing(self, missing_list):
- """Check if any entries in this section have missing external blobs
-
- If there are missing blobs, the entries are added to the list
-
- Args:
- missing_list: List of Entry objects to be added to
- """
- if self.missing:
- missing_list.append(self)
diff --git a/tools/binman/etype/_testing.py b/tools/binman/etype/_testing.py
index 0800c25899..ed718eed14 100644
--- a/tools/binman/etype/_testing.py
+++ b/tools/binman/etype/_testing.py
@@ -41,10 +41,10 @@ class Entry__testing(Entry):
data type (generating an error)
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
def ReadNode(self):
- super().ReadNode()
+ Entry.ReadNode(self)
self.return_invalid_entry = fdt_util.GetBool(self._node,
'return-invalid-entry')
self.return_unknown_contents = fdt_util.GetBool(self._node,
@@ -57,8 +57,6 @@ class Entry__testing(Entry):
'return-contents-once')
self.bad_update_contents_twice = fdt_util.GetBool(self._node,
'bad-update-contents-twice')
- self.return_contents_later = fdt_util.GetBool(self._node,
- 'return-contents-later')
# Set to True when the entry is ready to process the FDT.
self.process_fdt_ready = False
@@ -85,9 +83,6 @@ class Entry__testing(Entry):
def ObtainContents(self):
if self.return_unknown_contents or not self.return_contents:
return False
- if self.return_contents_later:
- self.return_contents_later = False
- return False
self.data = self.contents
self.contents_size = len(self.data)
if self.return_contents_once:
diff --git a/tools/binman/etype/blob.py b/tools/binman/etype/blob.py
index e507203709..ede7a7a68c 100644
--- a/tools/binman/etype/blob.py
+++ b/tools/binman/etype/blob.py
@@ -31,7 +31,7 @@ class Entry_blob(Entry):
data.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
self._filename = fdt_util.GetString(self._node, 'filename', self.etype)
self.compress = fdt_util.GetString(self._node, 'compress', 'none')
diff --git a/tools/binman/etype/blob_dtb.py b/tools/binman/etype/blob_dtb.py
index 724647a7bb..6c06943763 100644
--- a/tools/binman/etype/blob_dtb.py
+++ b/tools/binman/etype/blob_dtb.py
@@ -20,13 +20,13 @@ class Entry_blob_dtb(Entry_blob):
global state
from binman import state
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def ObtainContents(self):
"""Get the device-tree from the list held by the 'state' module"""
self._filename = self.GetDefaultFilename()
self._pathname, _ = state.GetFdtContents(self.GetFdtEtype())
- return super().ReadBlobContents()
+ return Entry_blob.ReadBlobContents(self)
def ProcessContents(self):
"""Re-read the DTB contents so that we get any calculated properties"""
@@ -57,7 +57,7 @@ class Entry_blob_dtb(Entry_blob):
return {self.GetFdtEtype(): [self, fname]}
def WriteData(self, data, decomp=True):
- ok = super().WriteData(data, decomp)
+ ok = Entry_blob.WriteData(self, data, decomp)
# Update the state module, since it has the authoritative record of the
# device trees used. If we don't do this, then state.GetFdtContents()
diff --git a/tools/binman/etype/blob_ext.py b/tools/binman/etype/blob_ext.py
deleted file mode 100644
index 8d641001a9..0000000000
--- a/tools/binman/etype/blob_ext.py
+++ /dev/null
@@ -1,39 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-# Copyright (c) 2016 Google, Inc
-# Written by Simon Glass <sjg@chromium.org>
-#
-# Entry-type module for external blobs, not built by U-Boot
-#
-
-import os
-
-from binman.etype.blob import Entry_blob
-from dtoc import fdt_util
-from patman import tools
-from patman import tout
-
-class Entry_blob_ext(Entry_blob):
- """Entry containing an externally built binary blob
-
- Note: This should not be used by itself. It is normally used as a parent
- class by other entry types.
-
- If the file providing this blob is missing, binman can optionally ignore it
- and produce a broken image with a warning.
-
- See 'blob' for Properties / Entry arguments.
- """
- def __init__(self, section, etype, node):
- Entry_blob.__init__(self, section, etype, node)
- self.external = True
-
- def ObtainContents(self):
- self._filename = self.GetDefaultFilename()
- self._pathname = tools.GetInputFilename(self._filename,
- self.section.GetAllowMissing())
- # Allow the file to be missing
- if not self._pathname:
- self.SetContents(b'')
- self.missing = True
- return True
- return super().ObtainContents()
diff --git a/tools/binman/etype/blob_named_by_arg.py b/tools/binman/etype/blob_named_by_arg.py
index e95dabe4d0..3b4593f071 100644
--- a/tools/binman/etype/blob_named_by_arg.py
+++ b/tools/binman/etype/blob_named_by_arg.py
@@ -29,6 +29,6 @@ class Entry_blob_named_by_arg(Entry_blob):
See cros_ec_rw for an example of this.
"""
def __init__(self, section, etype, node, blob_fname):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
self._filename, = self.GetEntryArgsOrProps(
[EntryArg('%s-path' % blob_fname, str)])
diff --git a/tools/binman/etype/cbfs.py b/tools/binman/etype/cbfs.py
index 650ab2c292..e9aed8310c 100644
--- a/tools/binman/etype/cbfs.py
+++ b/tools/binman/etype/cbfs.py
@@ -167,7 +167,7 @@ class Entry_cbfs(Entry):
global state
from binman import state
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
self._cbfs_arg = fdt_util.GetString(node, 'cbfs-arch', 'x86')
self._cbfs_entries = OrderedDict()
self._ReadSubnodes()
@@ -204,7 +204,7 @@ class Entry_cbfs(Entry):
return True
def _ReadSubnodes(self):
- """Read the subnodes to find out what should go in this CBFS"""
+ """Read the subnodes to find out what should go in this IFWI"""
for node in self._node.subnodes:
entry = Entry.Create(self, node)
entry.ReadNode()
@@ -226,7 +226,7 @@ class Entry_cbfs(Entry):
Args:
image_pos: Position of this entry in the image
"""
- super().SetImagePos(image_pos)
+ Entry.SetImagePos(self, image_pos)
# Now update the entries with info from the CBFS entries
for entry in self._cbfs_entries.values():
@@ -238,7 +238,7 @@ class Entry_cbfs(Entry):
entry.uncomp_size = cfile.memlen
def AddMissingProperties(self):
- super().AddMissingProperties()
+ Entry.AddMissingProperties(self)
for entry in self._cbfs_entries.values():
entry.AddMissingProperties()
if entry._cbfs_compress:
@@ -250,7 +250,7 @@ class Entry_cbfs(Entry):
def SetCalculatedProperties(self):
"""Set the value of device-tree properties calculated by binman"""
- super().SetCalculatedProperties()
+ Entry.SetCalculatedProperties(self)
for entry in self._cbfs_entries.values():
state.SetInt(entry._node, 'offset', entry.offset)
state.SetInt(entry._node, 'size', entry.size)
@@ -260,7 +260,7 @@ class Entry_cbfs(Entry):
def ListEntries(self, entries, indent):
"""Override this method to list all files in the section"""
- super().ListEntries(entries, indent)
+ Entry.ListEntries(self, entries, indent)
for entry in self._cbfs_entries.values():
entry.ListEntries(entries, indent + 1)
@@ -268,12 +268,12 @@ class Entry_cbfs(Entry):
return self._cbfs_entries
def ReadData(self, decomp=True):
- data = super().ReadData(True)
+ data = Entry.ReadData(self, True)
return data
def ReadChildData(self, child, decomp=True):
if not self.reader:
- data = super().ReadData(True)
+ data = Entry.ReadData(self, True)
self.reader = cbfs_util.CbfsReader(data)
reader = self.reader
cfile = reader.files.get(child.name)
diff --git a/tools/binman/etype/cros_ec_rw.py b/tools/binman/etype/cros_ec_rw.py
index 741372e1af..0dbe14b342 100644
--- a/tools/binman/etype/cros_ec_rw.py
+++ b/tools/binman/etype/cros_ec_rw.py
@@ -18,5 +18,5 @@ class Entry_cros_ec_rw(Entry_blob_named_by_arg):
updating the EC on startup via software sync.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node, 'cros-ec-rw')
- self.external = True
+ Entry_blob_named_by_arg.__init__(self, section, etype, node,
+ 'cros-ec-rw')
diff --git a/tools/binman/etype/fdtmap.py b/tools/binman/etype/fdtmap.py
index 6ca88a100e..aa8807990b 100644
--- a/tools/binman/etype/fdtmap.py
+++ b/tools/binman/etype/fdtmap.py
@@ -85,7 +85,7 @@ class Entry_fdtmap(Entry):
from binman import state
from dtoc.fdt import Fdt
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
def _GetFdtmap(self):
"""Build an FDT map from the entries in the current image
diff --git a/tools/binman/etype/files.py b/tools/binman/etype/files.py
index 9adb3afeb1..10ab585f0e 100644
--- a/tools/binman/etype/files.py
+++ b/tools/binman/etype/files.py
@@ -32,7 +32,7 @@ class Entry_files(Entry_section):
global state
from binman import state
- super().__init__(section, etype, node)
+ Entry_section.__init__(self, section, etype, node)
self._pattern = fdt_util.GetString(self._node, 'pattern')
if not self._pattern:
self.Raise("Missing 'pattern' property")
diff --git a/tools/binman/etype/fill.py b/tools/binman/etype/fill.py
index efb2d13e91..860410ed6e 100644
--- a/tools/binman/etype/fill.py
+++ b/tools/binman/etype/fill.py
@@ -22,10 +22,10 @@ class Entry_fill(Entry):
byte value of a region.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
def ReadNode(self):
- super().ReadNode()
+ Entry.ReadNode(self)
if self.size is None:
self.Raise("'fill' entry must have a size property")
self.fill_value = fdt_util.GetByte(self._node, 'fill-byte', 0)
diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py
deleted file mode 100644
index 75712f4409..0000000000
--- a/tools/binman/etype/fit.py
+++ /dev/null
@@ -1,164 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-# Copyright (c) 2016 Google, Inc
-# Written by Simon Glass <sjg@chromium.org>
-#
-# Entry-type module for producing a FIT
-#
-
-from collections import defaultdict, OrderedDict
-import libfdt
-
-from binman.entry import Entry
-from dtoc import fdt_util
-from dtoc.fdt import Fdt
-from patman import tools
-
-class Entry_fit(Entry):
- """Entry containing a FIT
-
- This calls mkimage to create a FIT (U-Boot Flat Image Tree) based on the
- input provided.
-
- Nodes for the FIT should be written out in the binman configuration just as
- they would be in a file passed to mkimage.
-
- For example, this creates an image containing a FIT with U-Boot SPL:
-
- binman {
- fit {
- description = "Test FIT";
-
- images {
- kernel@1 {
- description = "SPL";
- os = "u-boot";
- type = "rkspi";
- arch = "arm";
- compression = "none";
- load = <0>;
- entry = <0>;
-
- u-boot-spl {
- };
- };
- };
- };
- };
-
- Properties:
- fit,external-offset: Indicates that the contents of the FIT are external
- and provides the external offset. This is passsed to mkimage via
- the -E and -p flags.
-
- """
- def __init__(self, section, etype, node):
- """
- Members:
- _fit: FIT file being built
- _fit_content: dict:
- key: relative path to entry Node (from the base of the FIT)
- value: List of Entry objects comprising the contents of this
- node
- """
- super().__init__(section, etype, node)
- self._fit = None
- self._fit_content = defaultdict(list)
- self._fit_props = {}
-
- def ReadNode(self):
- self._ReadSubnodes()
- super().ReadNode()
-
- def _ReadSubnodes(self):
- def _AddNode(base_node, depth, node):
- """Add a node to the FIT
-
- Args:
- base_node: Base Node of the FIT (with 'description' property)
- depth: Current node depth (0 is the base node)
- node: Current node to process
-
- There are two cases to deal with:
- - hash and signature nodes which become part of the FIT
- - binman entries which are used to define the 'data' for each
- image
- """
- for pname, prop in node.props.items():
- if pname.startswith('fit,'):
- self._fit_props[pname] = prop
- else:
- fsw.property(pname, prop.bytes)
-
- rel_path = node.path[len(base_node.path):]
- has_images = depth == 2 and rel_path.startswith('/images/')
- for subnode in node.subnodes:
- if has_images and not (subnode.name.startswith('hash') or
- subnode.name.startswith('signature')):
- # This is a content node. We collect all of these together
- # and put them in the 'data' property. They do not appear
- # in the FIT.
- entry = Entry.Create(self.section, subnode)
- entry.ReadNode()
- self._fit_content[rel_path].append(entry)
- else:
- with fsw.add_node(subnode.name):
- _AddNode(base_node, depth + 1, subnode)
-
- # Build a new tree with all nodes and properties starting from the
- # entry node
- fsw = libfdt.FdtSw()
- fsw.finish_reservemap()
- with fsw.add_node(''):
- _AddNode(self._node, 0, self._node)
- fdt = fsw.as_fdt()
-
- # Pack this new FDT and scan it so we can add the data later
- fdt.pack()
- self._fdt = Fdt.FromData(fdt.as_bytearray())
- self._fdt.Scan()
-
- def ObtainContents(self):
- """Obtain the contents of the FIT
-
- This adds the 'data' properties to the input ITB (Image-tree Binary)
- then runs mkimage to process it.
- """
- data = self._BuildInput(self._fdt)
- if data == False:
- return False
- uniq = self.GetUniqueName()
- input_fname = tools.GetOutputFilename('%s.itb' % uniq)
- output_fname = tools.GetOutputFilename('%s.fit' % uniq)
- tools.WriteFile(input_fname, data)
- tools.WriteFile(output_fname, data)
-
- args = []
- ext_offset = self._fit_props.get('fit,external-offset')
- if ext_offset is not None:
- args += ['-E', '-p', '%x' % fdt_util.fdt32_to_cpu(ext_offset.value)]
- tools.Run('mkimage', '-t', '-F', output_fname, *args)
-
- self.SetContents(tools.ReadFile(output_fname))
- return True
-
- def _BuildInput(self, fdt):
- """Finish the FIT by adding the 'data' properties to it
-
- Arguments:
- fdt: FIT to update
-
- Returns:
- New fdt contents (bytes)
- """
- for path, entries in self._fit_content.items():
- node = fdt.GetNode(path)
- data = b''
- for entry in entries:
- if not entry.ObtainContents():
- return False
- data += entry.GetData()
- node.AddData('data', data)
-
- fdt.Sync(auto_resize=True)
- data = fdt.GetContents()
- return data
diff --git a/tools/binman/etype/fmap.py b/tools/binman/etype/fmap.py
index 3e9b815d11..a43fac38de 100644
--- a/tools/binman/etype/fmap.py
+++ b/tools/binman/etype/fmap.py
@@ -32,7 +32,7 @@ class Entry_fmap(Entry):
the sub-entries are ignored.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
def _GetFmap(self):
"""Build an FMAP from the entries in the current image
diff --git a/tools/binman/etype/gbb.py b/tools/binman/etype/gbb.py
index 41554eba8f..dd10599717 100644
--- a/tools/binman/etype/gbb.py
+++ b/tools/binman/etype/gbb.py
@@ -54,7 +54,7 @@ class Entry_gbb(Entry):
README.chromium for how to obtain the required keys and tools.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
self.hardware_id, self.keydir, self.bmpblk = self.GetEntryArgsOrProps(
[EntryArg('hardware-id', str),
EntryArg('keydir', str),
diff --git a/tools/binman/etype/image_header.py b/tools/binman/etype/image_header.py
index 2401188495..176bdeb29b 100644
--- a/tools/binman/etype/image_header.py
+++ b/tools/binman/etype/image_header.py
@@ -57,7 +57,7 @@ class Entry_image_header(Entry):
first/last in the entry list.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
self.location = fdt_util.GetString(self._node, 'location')
def _GetHeader(self):
@@ -101,7 +101,7 @@ class Entry_image_header(Entry):
else:
offset = image_size - IMAGE_HEADER_LEN
offset += self.section.GetStartOffset()
- return super().Pack(offset)
+ return Entry.Pack(self, offset)
def ProcessContents(self):
"""Write an updated version of the FDT map to this entry
diff --git a/tools/binman/etype/intel_cmc.py b/tools/binman/etype/intel_cmc.py
index 644fa421d3..5e6edbe4df 100644
--- a/tools/binman/etype/intel_cmc.py
+++ b/tools/binman/etype/intel_cmc.py
@@ -5,9 +5,10 @@
# Entry-type module for Intel Chip Microcode binary blob
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_cmc(Entry_blob_ext):
+class Entry_intel_cmc(Entry_blob):
"""Entry containing an Intel Chipset Micro Code (CMC) file
Properties / Entry arguments:
@@ -19,4 +20,4 @@ class Entry_intel_cmc(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
diff --git a/tools/binman/etype/intel_descriptor.py b/tools/binman/etype/intel_descriptor.py
index 7fe88a9ec1..d4d7a26901 100644
--- a/tools/binman/etype/intel_descriptor.py
+++ b/tools/binman/etype/intel_descriptor.py
@@ -8,7 +8,7 @@
import struct
from binman.entry import Entry
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.etype.blob import Entry_blob
FD_SIGNATURE = struct.pack('<L', 0x0ff0a55a)
MAX_REGIONS = 5
@@ -25,7 +25,7 @@ class Region:
self.limit = ((val & 0x0fff0000) >> 4) | 0xfff
self.size = self.limit - self.base + 1
-class Entry_intel_descriptor(Entry_blob_ext):
+class Entry_intel_descriptor(Entry_blob):
"""Intel flash descriptor block (4KB)
Properties / Entry arguments:
@@ -45,22 +45,16 @@ class Entry_intel_descriptor(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
self._regions = []
def Pack(self, offset):
"""Put this entry at the start of the image"""
if self.offset is None:
offset = self.section.GetStartOffset()
- return super().Pack(offset)
+ return Entry_blob.Pack(self, offset)
def GetOffsets(self):
- info = {}
- if self.missing:
- # Return zero offsets so that these entries get placed somewhere
- if self.HasSibling('intel-me'):
- info['intel-me'] = [0, None]
- return info
offset = self.data.find(FD_SIGNATURE)
if offset == -1:
self.Raise('Cannot find Intel Flash Descriptor (FD) signature')
@@ -72,6 +66,7 @@ class Entry_intel_descriptor(Entry_blob_ext):
# Set the offset for ME (Management Engine) and IFWI (Integrated
# Firmware Image), for now, since the others are not used.
+ info = {}
if self.HasSibling('intel-me'):
info['intel-me'] = [self._regions[REGION_ME].base,
self._regions[REGION_ME].size]
diff --git a/tools/binman/etype/intel_fit.py b/tools/binman/etype/intel_fit.py
index f1a10c55a6..ea482a6125 100644
--- a/tools/binman/etype/intel_fit.py
+++ b/tools/binman/etype/intel_fit.py
@@ -7,9 +7,9 @@
import struct
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.etype.blob import Entry_blob
-class Entry_intel_fit(Entry_blob_ext):
+class Entry_intel_fit(Entry_blob):
"""Intel Firmware Image Table (FIT)
This entry contains a dummy FIT as required by recent Intel CPUs. The FIT
@@ -19,11 +19,11 @@ class Entry_intel_fit(Entry_blob_ext):
At present binman only supports a basic FIT with no microcode.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def ReadNode(self):
"""Force 16-byte alignment as required by FIT pointer"""
- super().ReadNode()
+ Entry_blob.ReadNode(self)
self.align = 16
def ObtainContents(self):
diff --git a/tools/binman/etype/intel_fit_ptr.py b/tools/binman/etype/intel_fit_ptr.py
index 01f082281c..df118a68f2 100644
--- a/tools/binman/etype/intel_fit_ptr.py
+++ b/tools/binman/etype/intel_fit_ptr.py
@@ -7,16 +7,16 @@
import struct
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.etype.blob import Entry_blob
-class Entry_intel_fit_ptr(Entry_blob_ext):
+class Entry_intel_fit_ptr(Entry_blob):
"""Intel Firmware Image Table (FIT) pointer
This entry contains a pointer to the FIT. It is required to be at address
0xffffffc0 in the image.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
if self.HasSibling('intel-fit') is False:
self.Raise("'intel-fit-ptr' section must have an 'intel-fit' sibling")
@@ -38,4 +38,4 @@ class Entry_intel_fit_ptr(Entry_blob_ext):
def Pack(self, offset):
"""Special pack method to set the offset to the right place"""
- return super().Pack(0xffffffc0)
+ return Entry_blob.Pack(self, 0xffffffc0)
diff --git a/tools/binman/etype/intel_fsp.py b/tools/binman/etype/intel_fsp.py
index 2ac012bce1..7db3d96b43 100644
--- a/tools/binman/etype/intel_fsp.py
+++ b/tools/binman/etype/intel_fsp.py
@@ -5,9 +5,10 @@
# Entry-type module for Intel Firmware Support Package binary blob
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_fsp(Entry_blob_ext):
+class Entry_intel_fsp(Entry_blob):
"""Entry containing an Intel Firmware Support Package (FSP) file
Properties / Entry arguments:
@@ -23,4 +24,4 @@ class Entry_intel_fsp(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
diff --git a/tools/binman/etype/intel_fsp_m.py b/tools/binman/etype/intel_fsp_m.py
index 434b0f1856..51b4e7e1ac 100644
--- a/tools/binman/etype/intel_fsp_m.py
+++ b/tools/binman/etype/intel_fsp_m.py
@@ -5,9 +5,10 @@
# Entry-type module for Intel Firmware Support Package binary blob (M section)
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_fsp_m(Entry_blob_ext):
+class Entry_intel_fsp_m(Entry_blob):
"""Entry containing Intel Firmware Support Package (FSP) memory init
Properties / Entry arguments:
@@ -23,4 +24,4 @@ class Entry_intel_fsp_m(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
diff --git a/tools/binman/etype/intel_fsp_s.py b/tools/binman/etype/intel_fsp_s.py
index 564e1228bb..b3683e476a 100644
--- a/tools/binman/etype/intel_fsp_s.py
+++ b/tools/binman/etype/intel_fsp_s.py
@@ -5,9 +5,10 @@
# Entry-type module for Intel Firmware Support Package binary blob (S section)
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_fsp_s(Entry_blob_ext):
+class Entry_intel_fsp_s(Entry_blob):
"""Entry containing Intel Firmware Support Package (FSP) silicon init
Properties / Entry arguments:
@@ -23,4 +24,4 @@ class Entry_intel_fsp_s(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
diff --git a/tools/binman/etype/intel_fsp_t.py b/tools/binman/etype/intel_fsp_t.py
index df0c5fbee0..0f196f0f1c 100644
--- a/tools/binman/etype/intel_fsp_t.py
+++ b/tools/binman/etype/intel_fsp_t.py
@@ -5,9 +5,10 @@
# Entry-type module for Intel Firmware Support Package binary blob (T section)
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_fsp_t(Entry_blob_ext):
+class Entry_intel_fsp_t(Entry_blob):
"""Entry containing Intel Firmware Support Package (FSP) temp ram init
Properties / Entry arguments:
@@ -22,4 +23,4 @@ class Entry_intel_fsp_t(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
diff --git a/tools/binman/etype/intel_ifwi.py b/tools/binman/etype/intel_ifwi.py
index 76b3357c25..6a96f6be55 100644
--- a/tools/binman/etype/intel_ifwi.py
+++ b/tools/binman/etype/intel_ifwi.py
@@ -8,11 +8,11 @@
from collections import OrderedDict
from binman.entry import Entry
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.etype.blob import Entry_blob
from dtoc import fdt_util
from patman import tools
-class Entry_intel_ifwi(Entry_blob_ext):
+class Entry_intel_ifwi(Entry_blob):
"""Entry containing an Intel Integrated Firmware Image (IFWI) file
Properties / Entry arguments:
@@ -45,13 +45,13 @@ class Entry_intel_ifwi(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
self._convert_fit = fdt_util.GetBool(self._node, 'convert-fit')
self._ifwi_entries = OrderedDict()
def ReadNode(self):
self._ReadSubnodes()
- super().ReadNode()
+ Entry_blob.ReadNode(self)
def _BuildIfwi(self):
"""Build the contents of the IFWI and write it to the 'data' property"""
@@ -84,7 +84,7 @@ class Entry_intel_ifwi(Entry_blob_ext):
return True
def ObtainContents(self):
- """Get the contents for the IFWI
+ """Get the contects for the IFWI
Unfortunately we cannot create anything from scratch here, as Intel has
tools which create precursor binaries with lots of data and settings,
@@ -97,21 +97,13 @@ class Entry_intel_ifwi(Entry_blob_ext):
After that we delete the OBBP sub-partition and add each of the files
that we want in the IFWI file, one for each sub-entry of the IWFI node.
"""
- self._pathname = tools.GetInputFilename(self._filename,
- self.section.GetAllowMissing())
- # Allow the file to be missing
- if not self._pathname:
- self.SetContents(b'')
- self.missing = True
- return True
+ self._pathname = tools.GetInputFilename(self._filename)
for entry in self._ifwi_entries.values():
if not entry.ObtainContents():
return False
return self._BuildIfwi()
def ProcessContents(self):
- if self.missing:
- return True
orig_data = self.data
self._BuildIfwi()
same = orig_data == self.data
@@ -129,6 +121,5 @@ class Entry_intel_ifwi(Entry_blob_ext):
def WriteSymbols(self, section):
"""Write symbol values into binary files for access at run time"""
- if not self.missing:
- for entry in self._ifwi_entries.values():
- entry.WriteSymbols(self)
+ for entry in self._ifwi_entries.values():
+ entry.WriteSymbols(self)
diff --git a/tools/binman/etype/intel_me.py b/tools/binman/etype/intel_me.py
index a6fe5427f3..41c9c6b920 100644
--- a/tools/binman/etype/intel_me.py
+++ b/tools/binman/etype/intel_me.py
@@ -5,9 +5,10 @@
# Entry-type module for Intel Management Engine binary blob
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_me(Entry_blob_ext):
+class Entry_intel_me(Entry_blob):
"""Entry containing an Intel Management Engine (ME) file
Properties / Entry arguments:
@@ -15,7 +16,7 @@ class Entry_intel_me(Entry_blob_ext):
This file contains code used by the SoC that is required to make it work.
The Management Engine is like a background task that runs things that are
- not clearly documented, but may include keyboard, display and network
+ not clearly documented, but may include keyboard, deplay and network
access. For platform that use ME it is not possible to disable it. U-Boot
does not directly execute code in the ME binary.
@@ -26,4 +27,4 @@ class Entry_intel_me(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
diff --git a/tools/binman/etype/intel_mrc.py b/tools/binman/etype/intel_mrc.py
index ccbb046519..854a4dda61 100644
--- a/tools/binman/etype/intel_mrc.py
+++ b/tools/binman/etype/intel_mrc.py
@@ -5,9 +5,10 @@
# Entry-type module for Intel Memory Reference Code binary blob
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_mrc(Entry_blob_ext):
+class Entry_intel_mrc(Entry_blob):
"""Entry containing an Intel Memory Reference Code (MRC) file
Properties / Entry arguments:
@@ -20,7 +21,7 @@ class Entry_intel_mrc(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'mrc.bin'
diff --git a/tools/binman/etype/intel_refcode.py b/tools/binman/etype/intel_refcode.py
index 5ead08b2be..a1059f787e 100644
--- a/tools/binman/etype/intel_refcode.py
+++ b/tools/binman/etype/intel_refcode.py
@@ -5,9 +5,10 @@
# Entry-type module for Intel Memory Reference Code binary blob
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_refcode(Entry_blob_ext):
+class Entry_intel_refcode(Entry_blob):
"""Entry containing an Intel Reference Code file
Properties / Entry arguments:
@@ -20,7 +21,7 @@ class Entry_intel_refcode(Entry_blob_ext):
See README.x86 for information about x86 binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'refcode.bin'
diff --git a/tools/binman/etype/intel_vbt.py b/tools/binman/etype/intel_vbt.py
index 2a98c12368..4d465ad017 100644
--- a/tools/binman/etype/intel_vbt.py
+++ b/tools/binman/etype/intel_vbt.py
@@ -4,9 +4,10 @@
# Entry-type module for Intel Video BIOS Table binary blob
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_vbt(Entry_blob_ext):
+class Entry_intel_vbt(Entry_blob):
"""Entry containing an Intel Video BIOS Table (VBT) file
Properties / Entry arguments:
@@ -18,4 +19,4 @@ class Entry_intel_vbt(Entry_blob_ext):
See README.x86 for information about Intel binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
diff --git a/tools/binman/etype/intel_vga.py b/tools/binman/etype/intel_vga.py
index a103f1ce0e..04cd72f3dc 100644
--- a/tools/binman/etype/intel_vga.py
+++ b/tools/binman/etype/intel_vga.py
@@ -5,9 +5,10 @@
# Entry-type module for x86 VGA ROM binary blob
#
-from binman.etype.blob_ext import Entry_blob_ext
+from binman.entry import Entry
+from binman.etype.blob import Entry_blob
-class Entry_intel_vga(Entry_blob_ext):
+class Entry_intel_vga(Entry_blob):
"""Entry containing an Intel Video Graphics Adaptor (VGA) file
Properties / Entry arguments:
@@ -21,4 +22,4 @@ class Entry_intel_vga(Entry_blob_ext):
See README.x86 for information about Intel binary blobs.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
diff --git a/tools/binman/etype/mkimage.py b/tools/binman/etype/mkimage.py
deleted file mode 100644
index 8fddc88118..0000000000
--- a/tools/binman/etype/mkimage.py
+++ /dev/null
@@ -1,62 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-# Copyright (c) 2016 Google, Inc
-# Written by Simon Glass <sjg@chromium.org>
-#
-# Entry-type module for producing an image using mkimage
-#
-
-from collections import OrderedDict
-
-from binman.entry import Entry
-from dtoc import fdt_util
-from patman import tools
-
-class Entry_mkimage(Entry):
- """Entry containing a binary produced by mkimage
-
- Properties / Entry arguments:
- - datafile: Filename for -d argument
- - args: Other arguments to pass
-
- The data passed to mkimage is collected from subnodes of the mkimage node,
- e.g.:
-
- mkimage {
- args = "-n test -T imximage";
-
- u-boot-spl {
- };
- };
-
- This calls mkimage to create an imximage with u-boot-spl.bin as the input
- file. The output from mkimage then becomes part of the image produced by
- binman.
- """
- def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
- self._args = fdt_util.GetString(self._node, 'args').split(' ')
- self._mkimage_entries = OrderedDict()
- self._ReadSubnodes()
-
- def ObtainContents(self):
- data = b''
- for entry in self._mkimage_entries.values():
- # First get the input data and put it in a file. If not available,
- # try later.
- if not entry.ObtainContents():
- return False
- data += entry.GetData()
- uniq = self.GetUniqueName()
- input_fname = tools.GetOutputFilename('mkimage.%s' % uniq)
- tools.WriteFile(input_fname, data)
- output_fname = tools.GetOutputFilename('mkimage-out.%s' % uniq)
- tools.Run('mkimage', '-d', input_fname, *self._args, output_fname)
- self.SetContents(tools.ReadFile(output_fname))
- return True
-
- def _ReadSubnodes(self):
- """Read the subnodes to find out what should go in this image"""
- for node in self._node.subnodes:
- entry = Entry.Create(self, node)
- entry.ReadNode()
- self._mkimage_entries[entry.name] = entry
diff --git a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
index 3a92fa399f..cefd425a5d 100644
--- a/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
+++ b/tools/binman/etype/powerpc_mpc85xx_bootpg_resetvec.py
@@ -4,6 +4,7 @@
# Entry-type module for the PowerPC mpc85xx bootpg and resetvec code for U-Boot
#
+from binman.entry import Entry
from binman.etype.blob import Entry_blob
class Entry_powerpc_mpc85xx_bootpg_resetvec(Entry_blob):
@@ -12,13 +13,13 @@ class Entry_powerpc_mpc85xx_bootpg_resetvec(Entry_blob):
Properties / Entry arguments:
- filename: Filename of u-boot-br.bin (default 'u-boot-br.bin')
- This entry is valid for PowerPC mpc85xx cpus. This entry holds
+ This enrty is valid for PowerPC mpc85xx cpus. This entry holds
'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be
placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'u-boot-br.bin'
diff --git a/tools/binman/etype/section.py b/tools/binman/etype/section.py
index 73c5553c81..91b8e0c110 100644
--- a/tools/binman/etype/section.py
+++ b/tools/binman/etype/section.py
@@ -34,11 +34,6 @@ class Entry_section(Entry):
name-prefix: Adds a prefix to the name of every entry in the section
when writing out the map
- Properties:
- _allow_missing: True if this section permits external blobs to be
- missing their contents. The second will produce an image but of
- course it will not work.
-
Since a section is also an entry, it inherits all the properies of entries
too.
@@ -48,18 +43,16 @@ class Entry_section(Entry):
"""
def __init__(self, section, etype, node, test=False):
if not test:
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
self._entries = OrderedDict()
self._pad_byte = 0
self._sort = False
self._skip_at_start = None
self._end_4gb = False
- self._allow_missing = False
- self.missing = False
def ReadNode(self):
"""Read properties from the image node"""
- super().ReadNode()
+ Entry.ReadNode(self)
self._pad_byte = fdt_util.GetInt(self._node, 'pad-byte', 0)
self._sort = fdt_util.GetBool(self._node, 'sort-by-offset')
self._end_4gb = fdt_util.GetBool(self._node, 'end-at-4gb')
@@ -133,13 +126,13 @@ class Entry_section(Entry):
a section containing a list of files. Process these entries so that
this information is added to the device tree.
"""
- super().ExpandEntries()
+ Entry.ExpandEntries(self)
for entry in self._entries.values():
entry.ExpandEntries()
def AddMissingProperties(self):
"""Add new properties to the device tree as needed for this entry"""
- super().AddMissingProperties()
+ Entry.AddMissingProperties(self)
for entry in self._entries.values():
entry.AddMissingProperties()
@@ -175,14 +168,14 @@ class Entry_section(Entry):
def ResetForPack(self):
"""Reset offset/size fields so that packing can be done again"""
- super().ResetForPack()
+ Entry.ResetForPack(self)
for entry in self._entries.values():
entry.ResetForPack()
def Pack(self, offset):
"""Pack all entries into the section"""
self._PackEntries()
- return super().Pack(offset)
+ return Entry.Pack(self, offset)
def _PackEntries(self):
"""Pack all entries into the image"""
@@ -226,7 +219,7 @@ class Entry_section(Entry):
"at %#x (%d)" %
(entry.offset, entry.offset, self._skip_at_start,
self._skip_at_start))
- if entry.offset < offset and entry.size:
+ if entry.offset < offset:
entry.Raise("Offset %#x (%d) overlaps with previous entry '%s' "
"ending at %#x (%d)" %
(entry.offset, entry.offset, prev_name, offset, offset))
@@ -239,12 +232,12 @@ class Entry_section(Entry):
entry.WriteSymbols(self)
def SetCalculatedProperties(self):
- super().SetCalculatedProperties()
+ Entry.SetCalculatedProperties(self)
for entry in self._entries.values():
entry.SetCalculatedProperties()
def SetImagePos(self, image_pos):
- super().SetImagePos(image_pos)
+ Entry.SetImagePos(self, image_pos)
for entry in self._entries.values():
entry.SetImagePos(image_pos + self.offset)
@@ -442,8 +435,8 @@ class Entry_section(Entry):
if not entry:
self._Raise("Unable to set offset/size for unknown entry '%s'" %
name)
- entry.SetOffsetSize(self._skip_at_start + offset if offset is not None
- else None, size)
+ entry.SetOffsetSize(self._skip_at_start + offset if offset else None,
+ size)
def GetEntryOffsets(self):
"""Handle entries that want to set the offset/size of other entries
@@ -542,32 +535,3 @@ class Entry_section(Entry):
def WriteChildData(self, child):
return True
-
- def SetAllowMissing(self, allow_missing):
- """Set whether a section allows missing external blobs
-
- Args:
- allow_missing: True if allowed, False if not allowed
- """
- self._allow_missing = allow_missing
- for entry in self._entries.values():
- entry.SetAllowMissing(allow_missing)
-
- def GetAllowMissing(self):
- """Get whether a section allows missing external blobs
-
- Returns:
- True if allowed, False if not allowed
- """
- return self._allow_missing
-
- def CheckMissing(self, missing_list):
- """Check if any entries in this section have missing external blobs
-
- If there are missing blobs, the entries are added to the list
-
- Args:
- missing_list: List of Entry objects to be added to
- """
- for entry in self._entries.values():
- entry.CheckMissing(missing_list)
diff --git a/tools/binman/etype/text.py b/tools/binman/etype/text.py
index a69c2a4ec4..3577135adb 100644
--- a/tools/binman/etype/text.py
+++ b/tools/binman/etype/text.py
@@ -57,7 +57,7 @@ class Entry_text(Entry):
by setting the size of the entry to something larger than the text.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
value = fdt_util.GetString(self._node, 'text')
if value:
value = tools.ToBytes(value)
diff --git a/tools/binman/etype/u_boot.py b/tools/binman/etype/u_boot.py
index 4767197e13..ab1019b00c 100644
--- a/tools/binman/etype/u_boot.py
+++ b/tools/binman/etype/u_boot.py
@@ -26,7 +26,7 @@ class Entry_u_boot(Entry_blob):
in the binman README for more information.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'u-boot.bin'
diff --git a/tools/binman/etype/u_boot_dtb.py b/tools/binman/etype/u_boot_dtb.py
index 65e71291d2..e98350088f 100644
--- a/tools/binman/etype/u_boot_dtb.py
+++ b/tools/binman/etype/u_boot_dtb.py
@@ -22,7 +22,7 @@ class Entry_u_boot_dtb(Entry_blob_dtb):
binman to know which entries contain a device tree.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob_dtb.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'u-boot.dtb'
diff --git a/tools/binman/etype/u_boot_dtb_with_ucode.py b/tools/binman/etype/u_boot_dtb_with_ucode.py
index 66a9db55ca..aec145533e 100644
--- a/tools/binman/etype/u_boot_dtb_with_ucode.py
+++ b/tools/binman/etype/u_boot_dtb_with_ucode.py
@@ -28,7 +28,7 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob_dtb):
global state
from binman import state
- super().__init__(section, etype, node)
+ Entry_blob_dtb.__init__(self, section, etype, node)
self.ucode_data = b''
self.collate = False
self.ucode_offset = None
@@ -78,7 +78,7 @@ class Entry_u_boot_dtb_with_ucode(Entry_blob_dtb):
def ObtainContents(self):
# Call the base class just in case it does something important.
- super().ObtainContents()
+ Entry_blob_dtb.ObtainContents(self)
if self.ucode and not self.collate:
for node in self.ucode.subnodes:
data_prop = node.props.get('data')
diff --git a/tools/binman/etype/u_boot_elf.py b/tools/binman/etype/u_boot_elf.py
index 6614a75faf..5f906e520c 100644
--- a/tools/binman/etype/u_boot_elf.py
+++ b/tools/binman/etype/u_boot_elf.py
@@ -21,7 +21,7 @@ class Entry_u_boot_elf(Entry_blob):
relocated to any address for execution.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
self._strip = fdt_util.GetBool(self._node, 'strip')
def ReadBlobContents(self):
@@ -31,7 +31,7 @@ class Entry_u_boot_elf(Entry_blob):
tools.WriteFile(out_fname, tools.ReadFile(self._pathname))
tools.Run('strip', out_fname)
self._pathname = out_fname
- super().ReadBlobContents()
+ Entry_blob.ReadBlobContents(self)
return True
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_img.py b/tools/binman/etype/u_boot_img.py
index 8a739d8edb..50cc71d3ce 100644
--- a/tools/binman/etype/u_boot_img.py
+++ b/tools/binman/etype/u_boot_img.py
@@ -21,7 +21,7 @@ class Entry_u_boot_img(Entry_blob):
applications.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'u-boot.img'
diff --git a/tools/binman/etype/u_boot_nodtb.py b/tools/binman/etype/u_boot_nodtb.py
index e84df490f6..e8c0e1a1d6 100644
--- a/tools/binman/etype/u_boot_nodtb.py
+++ b/tools/binman/etype/u_boot_nodtb.py
@@ -21,7 +21,7 @@ class Entry_u_boot_nodtb(Entry_blob):
U-Boot and the device tree).
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'u-boot-nodtb.bin'
diff --git a/tools/binman/etype/u_boot_spl.py b/tools/binman/etype/u_boot_spl.py
index d66e46140b..a6fddbe8f1 100644
--- a/tools/binman/etype/u_boot_spl.py
+++ b/tools/binman/etype/u_boot_spl.py
@@ -32,7 +32,7 @@ class Entry_u_boot_spl(Entry_blob):
binman uses that to look up symbols to write into the SPL binary.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
self.elf_fname = 'spl/u-boot-spl'
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_spl_bss_pad.py b/tools/binman/etype/u_boot_spl_bss_pad.py
index 596b2bed97..a6a177a128 100644
--- a/tools/binman/etype/u_boot_spl_bss_pad.py
+++ b/tools/binman/etype/u_boot_spl_bss_pad.py
@@ -31,7 +31,7 @@ class Entry_u_boot_spl_bss_pad(Entry_blob):
binman uses that to look up the BSS address.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def ObtainContents(self):
fname = tools.GetInputFilename('spl/u-boot-spl')
diff --git a/tools/binman/etype/u_boot_spl_dtb.py b/tools/binman/etype/u_boot_spl_dtb.py
index eefc4a44aa..a0761eeacd 100644
--- a/tools/binman/etype/u_boot_spl_dtb.py
+++ b/tools/binman/etype/u_boot_spl_dtb.py
@@ -19,7 +19,7 @@ class Entry_u_boot_spl_dtb(Entry_blob_dtb):
to activate.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob_dtb.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-spl.dtb'
diff --git a/tools/binman/etype/u_boot_spl_elf.py b/tools/binman/etype/u_boot_spl_elf.py
index 7f1236bcbb..f99f74abab 100644
--- a/tools/binman/etype/u_boot_spl_elf.py
+++ b/tools/binman/etype/u_boot_spl_elf.py
@@ -18,7 +18,7 @@ class Entry_u_boot_spl_elf(Entry_blob):
be relocated to any address for execution.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-spl'
diff --git a/tools/binman/etype/u_boot_spl_nodtb.py b/tools/binman/etype/u_boot_spl_nodtb.py
index 6f4529396d..072b915ff3 100644
--- a/tools/binman/etype/u_boot_spl_nodtb.py
+++ b/tools/binman/etype/u_boot_spl_nodtb.py
@@ -22,7 +22,7 @@ class Entry_u_boot_spl_nodtb(Entry_blob):
both SPL and the device tree).
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-spl-nodtb.bin'
diff --git a/tools/binman/etype/u_boot_spl_with_ucode_ptr.py b/tools/binman/etype/u_boot_spl_with_ucode_ptr.py
index 72739a5eb6..b1543a5ef3 100644
--- a/tools/binman/etype/u_boot_spl_with_ucode_ptr.py
+++ b/tools/binman/etype/u_boot_spl_with_ucode_ptr.py
@@ -18,7 +18,7 @@ class Entry_u_boot_spl_with_ucode_ptr(Entry_u_boot_with_ucode_ptr):
process.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_u_boot_with_ucode_ptr.__init__(self, section, etype, node)
self.elf_fname = 'spl/u-boot-spl'
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_tpl.py b/tools/binman/etype/u_boot_tpl.py
index 02287ab327..6562457c9a 100644
--- a/tools/binman/etype/u_boot_tpl.py
+++ b/tools/binman/etype/u_boot_tpl.py
@@ -32,7 +32,7 @@ class Entry_u_boot_tpl(Entry_blob):
binman uses that to look up symbols to write into the TPL binary.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
self.elf_fname = 'tpl/u-boot-tpl'
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_tpl_dtb.py b/tools/binman/etype/u_boot_tpl_dtb.py
index 2ff1d7ced1..890155f271 100644
--- a/tools/binman/etype/u_boot_tpl_dtb.py
+++ b/tools/binman/etype/u_boot_tpl_dtb.py
@@ -19,7 +19,7 @@ class Entry_u_boot_tpl_dtb(Entry_blob_dtb):
to activate.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob_dtb.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-tpl.dtb'
diff --git a/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py b/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py
index 066f18dfef..ca1bf85ace 100644
--- a/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py
+++ b/tools/binman/etype/u_boot_tpl_dtb_with_ucode.py
@@ -16,7 +16,7 @@ class Entry_u_boot_tpl_dtb_with_ucode(Entry_u_boot_dtb_with_ucode):
process.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_u_boot_dtb_with_ucode.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-tpl.dtb'
diff --git a/tools/binman/etype/u_boot_tpl_elf.py b/tools/binman/etype/u_boot_tpl_elf.py
index 3f24d3aa7b..7fa8e96364 100644
--- a/tools/binman/etype/u_boot_tpl_elf.py
+++ b/tools/binman/etype/u_boot_tpl_elf.py
@@ -18,7 +18,7 @@ class Entry_u_boot_tpl_elf(Entry_blob):
be relocated to any address for execution.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-tpl'
diff --git a/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py b/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py
index c7f3f9dedb..7f7fab7105 100644
--- a/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py
+++ b/tools/binman/etype/u_boot_tpl_with_ucode_ptr.py
@@ -20,7 +20,7 @@ class Entry_u_boot_tpl_with_ucode_ptr(Entry_u_boot_with_ucode_ptr):
process.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_u_boot_with_ucode_ptr.__init__(self, section, etype, node)
self.elf_fname = 'tpl/u-boot-tpl'
def GetDefaultFilename(self):
diff --git a/tools/binman/etype/u_boot_ucode.py b/tools/binman/etype/u_boot_ucode.py
index 4462293618..d9e1a605ef 100644
--- a/tools/binman/etype/u_boot_ucode.py
+++ b/tools/binman/etype/u_boot_ucode.py
@@ -58,7 +58,7 @@ class Entry_u_boot_ucode(Entry_blob):
contents of this entry.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def ObtainContents(self):
# If the section does not need microcode, there is nothing to do
diff --git a/tools/binman/etype/u_boot_with_ucode_ptr.py b/tools/binman/etype/u_boot_with_ucode_ptr.py
index 92d2fc6853..06047b654d 100644
--- a/tools/binman/etype/u_boot_with_ucode_ptr.py
+++ b/tools/binman/etype/u_boot_with_ucode_ptr.py
@@ -29,7 +29,7 @@ class Entry_u_boot_with_ucode_ptr(Entry_blob):
complicated. Otherwise it is the same as the u_boot entry.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
self.elf_fname = 'u-boot'
self.target_offset = None
diff --git a/tools/binman/etype/vblock.py b/tools/binman/etype/vblock.py
index f734fbaec4..5753de7ec7 100644
--- a/tools/binman/etype/vblock.py
+++ b/tools/binman/etype/vblock.py
@@ -36,7 +36,7 @@ class Entry_vblock(Entry):
and kernel are genuine.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry.__init__(self, section, etype, node)
self.content = fdt_util.GetPhandleList(self._node, 'content')
if not self.content:
self.Raise("Vblock must have a 'content' property")
diff --git a/tools/binman/etype/x86_reset16.py b/tools/binman/etype/x86_reset16.py
index 5d49f16e21..ad864e5442 100644
--- a/tools/binman/etype/x86_reset16.py
+++ b/tools/binman/etype/x86_reset16.py
@@ -23,7 +23,7 @@ class Entry_x86_reset16(Entry_blob):
For 64-bit U-Boot, the 'x86_reset16_spl' entry type is used instead.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'u-boot-x86-reset16.bin'
diff --git a/tools/binman/etype/x86_reset16_spl.py b/tools/binman/etype/x86_reset16_spl.py
index 775b90699b..9a663f0ae2 100644
--- a/tools/binman/etype/x86_reset16_spl.py
+++ b/tools/binman/etype/x86_reset16_spl.py
@@ -23,7 +23,7 @@ class Entry_x86_reset16_spl(Entry_blob):
For 32-bit U-Boot, the 'x86_reset_spl' entry type is used instead.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-x86-reset16-spl.bin'
diff --git a/tools/binman/etype/x86_reset16_tpl.py b/tools/binman/etype/x86_reset16_tpl.py
index 52d3f4869a..864508f367 100644
--- a/tools/binman/etype/x86_reset16_tpl.py
+++ b/tools/binman/etype/x86_reset16_tpl.py
@@ -23,7 +23,7 @@ class Entry_x86_reset16_tpl(Entry_blob):
For 32-bit U-Boot, the 'x86_reset_tpl' entry type is used instead.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-x86-reset16-tpl.bin'
diff --git a/tools/binman/etype/x86_start16.py b/tools/binman/etype/x86_start16.py
index 18fdd95d37..d8345f6722 100644
--- a/tools/binman/etype/x86_start16.py
+++ b/tools/binman/etype/x86_start16.py
@@ -25,7 +25,7 @@ class Entry_x86_start16(Entry_blob):
For 64-bit U-Boot, the 'x86_start16_spl' entry type is used instead.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'u-boot-x86-start16.bin'
diff --git a/tools/binman/etype/x86_start16_spl.py b/tools/binman/etype/x86_start16_spl.py
index ac8e90f2e0..ad520d3c6d 100644
--- a/tools/binman/etype/x86_start16_spl.py
+++ b/tools/binman/etype/x86_start16_spl.py
@@ -25,7 +25,7 @@ class Entry_x86_start16_spl(Entry_blob):
For 32-bit U-Boot, the 'x86-start16' entry type is used instead.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'spl/u-boot-x86-start16-spl.bin'
diff --git a/tools/binman/etype/x86_start16_tpl.py b/tools/binman/etype/x86_start16_tpl.py
index 72d4608bb7..ccc8727d1d 100644
--- a/tools/binman/etype/x86_start16_tpl.py
+++ b/tools/binman/etype/x86_start16_tpl.py
@@ -26,7 +26,7 @@ class Entry_x86_start16_tpl(Entry_blob):
may be used instead.
"""
def __init__(self, section, etype, node):
- super().__init__(section, etype, node)
+ Entry_blob.__init__(self, section, etype, node)
def GetDefaultFilename(self):
return 'tpl/u-boot-x86-start16-tpl.bin'
diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py
index ea72eff8c5..5e24920088 100644
--- a/tools/binman/ftest.py
+++ b/tools/binman/ftest.py
@@ -6,12 +6,10 @@
#
# python -m unittest func_test.TestFunctional.testHelp
-import collections
import gzip
import hashlib
from optparse import OptionParser
import os
-import re
import shutil
import struct
import sys
@@ -162,7 +160,8 @@ class TestFunctional(unittest.TestCase):
tools.ReadFile(cls.ElfTestFile('u_boot_ucode_ptr')))
# Intel flash descriptor file
- cls._SetupDescriptor()
+ with open(cls.TestFile('descriptor.bin'), 'rb') as fd:
+ TestFunctional._MakeInputFile('descriptor.bin', fd.read())
shutil.copytree(cls.TestFile('files'),
os.path.join(cls._indir, 'files'))
@@ -286,7 +285,7 @@ class TestFunctional(unittest.TestCase):
def _DoTestFile(self, fname, debug=False, map=False, update_dtb=False,
entry_args=None, images=None, use_real_dtb=False,
- verbosity=None, allow_missing=False):
+ verbosity=None):
"""Run binman with a given test file
Args:
@@ -320,8 +319,6 @@ class TestFunctional(unittest.TestCase):
if entry_args:
for arg, value in entry_args.items():
args.append('-a%s=%s' % (arg, value))
- if allow_missing:
- args.append('-M')
if images:
for image in images:
args += ['-i', image]
@@ -509,11 +506,6 @@ class TestFunctional(unittest.TestCase):
tools.ReadFile(cls.ElfTestFile(src_fname)))
@classmethod
- def _SetupDescriptor(cls):
- with open(cls.TestFile('descriptor.bin'), 'rb') as fd:
- TestFunctional._MakeInputFile('descriptor.bin', fd.read())
-
- @classmethod
def TestFile(cls, fname):
return os.path.join(cls._binman_dir, 'test', fname)
@@ -939,14 +931,11 @@ class TestFunctional(unittest.TestCase):
def testPackX86RomMeNoDesc(self):
"""Test that an invalid Intel descriptor entry is detected"""
- try:
- TestFunctional._MakeInputFile('descriptor.bin', b'')
- with self.assertRaises(ValueError) as e:
- self._DoTestFile('031_x86_rom_me.dts')
- self.assertIn("Node '/binman/intel-descriptor': Cannot find Intel Flash Descriptor (FD) signature",
- str(e.exception))
- finally:
- self._SetupDescriptor()
+ TestFunctional._MakeInputFile('descriptor.bin', b'')
+ with self.assertRaises(ValueError) as e:
+ self._DoTestFile('031_x86_rom_me.dts')
+ self.assertIn("Node '/binman/intel-descriptor': Cannot find Intel Flash Descriptor (FD) signature",
+ str(e.exception))
def testPackX86RomBadDesc(self):
"""Test that the Intel requires a descriptor entry"""
@@ -3241,7 +3230,7 @@ class TestFunctional(unittest.TestCase):
with test_util.capture_sys_output() as (stdout, stderr):
control.ReplaceEntries(updated_fname, None, outdir, [])
self.assertIn("Skipping entry '/u-boot' from missing file",
- stderr.getvalue())
+ stdout.getvalue())
def testReplaceCmdMap(self):
"""Test replacing a file fron an image on the command line"""
@@ -3368,117 +3357,6 @@ class TestFunctional(unittest.TestCase):
data = self._DoReadFile('154_intel_fsp_t.dts')
self.assertEqual(FSP_T_DATA, data[:len(FSP_T_DATA)])
- def testMkimage(self):
- """Test using mkimage to build an image"""
- data = self._DoReadFile('156_mkimage.dts')
-
- # Just check that the data appears in the file somewhere
- self.assertIn(U_BOOT_SPL_DATA, data)
-
- def testExtblob(self):
- """Test an image with an external blob"""
- data = self._DoReadFile('157_blob_ext.dts')
- self.assertEqual(REFCODE_DATA, data)
-
- def testExtblobMissing(self):
- """Test an image with a missing external blob"""
- with self.assertRaises(ValueError) as e:
- self._DoReadFile('158_blob_ext_missing.dts')
- self.assertIn("Filename 'missing-file' not found in input path",
- str(e.exception))
-
- def testExtblobMissingOk(self):
- """Test an image with an missing external blob that is allowed"""
- with test_util.capture_sys_output() as (stdout, stderr):
- self._DoTestFile('158_blob_ext_missing.dts', allow_missing=True)
- err = stderr.getvalue()
- self.assertRegex(err, "Image 'main-section'.*missing.*: blob-ext")
-
- def testExtblobMissingOkSect(self):
- """Test an image with an missing external blob that is allowed"""
- with test_util.capture_sys_output() as (stdout, stderr):
- self._DoTestFile('159_blob_ext_missing_sect.dts',
- allow_missing=True)
- err = stderr.getvalue()
- self.assertRegex(err, "Image 'main-section'.*missing.*: "
- "blob-ext blob-ext2")
-
- def testPackX86RomMeMissingDesc(self):
- """Test that an missing Intel descriptor entry is allowed"""
- pathname = os.path.join(self._indir, 'descriptor.bin')
- os.remove(pathname)
- with test_util.capture_sys_output() as (stdout, stderr):
- self._DoTestFile('031_x86_rom_me.dts', allow_missing=True)
- err = stderr.getvalue()
- self.assertRegex(err,
- "Image 'main-section'.*missing.*: intel-descriptor")
-
- def testPackX86RomMissingIfwi(self):
- """Test that an x86 ROM with Integrated Firmware Image can be created"""
- self._SetupIfwi('fitimage.bin')
- pathname = os.path.join(self._indir, 'fitimage.bin')
- os.remove(pathname)
- with test_util.capture_sys_output() as (stdout, stderr):
- self._DoTestFile('111_x86_rom_ifwi.dts', allow_missing=True)
- err = stderr.getvalue()
- self.assertRegex(err, "Image 'main-section'.*missing.*: intel-ifwi")
-
- def testPackOverlap(self):
- """Test that zero-size overlapping regions are ignored"""
- self._DoTestFile('160_pack_overlap_zero.dts')
-
- def testSimpleFit(self):
- """Test an image with a FIT inside"""
- data = self._DoReadFile('161_fit.dts')
- self.assertEqual(U_BOOT_DATA, data[:len(U_BOOT_DATA)])
- self.assertEqual(U_BOOT_NODTB_DATA, data[-len(U_BOOT_NODTB_DATA):])
- fit_data = data[len(U_BOOT_DATA):-len(U_BOOT_NODTB_DATA)]
-
- # The data should be inside the FIT
- dtb = fdt.Fdt.FromData(fit_data)
- dtb.Scan()
- fnode = dtb.GetNode('/images/kernel')
- self.assertIn('data', fnode.props)
-
- fname = os.path.join(self._indir, 'fit_data.fit')
- tools.WriteFile(fname, fit_data)
- out = tools.Run('dumpimage', '-l', fname)
-
- # Check a few features to make sure the plumbing works. We don't need
- # to test the operation of mkimage or dumpimage here. First convert the
- # output into a dict where the keys are the fields printed by dumpimage
- # and the values are a list of values for each field
- lines = out.splitlines()
-
- # Converts "Compression: gzip compressed" into two groups:
- # 'Compression' and 'gzip compressed'
- re_line = re.compile(r'^ *([^:]*)(?:: *(.*))?$')
- vals = collections.defaultdict(list)
- for line in lines:
- mat = re_line.match(line)
- vals[mat.group(1)].append(mat.group(2))
-
- self.assertEquals('FIT description: test-desc', lines[0])
- self.assertIn('Created:', lines[1])
- self.assertIn('Image 0 (kernel)', vals)
- self.assertIn('Hash value', vals)
- data_sizes = vals.get('Data Size')
- self.assertIsNotNone(data_sizes)
- self.assertEqual(2, len(data_sizes))
- # Format is "4 Bytes = 0.00 KiB = 0.00 MiB" so take the first word
- self.assertEqual(len(U_BOOT_DATA), int(data_sizes[0].split()[0]))
- self.assertEqual(len(U_BOOT_SPL_DTB_DATA), int(data_sizes[1].split()[0]))
-
- def testFitExternal(self):
- """Test an image with an FIT"""
- data = self._DoReadFile('162_fit_external.dts')
- fit_data = data[len(U_BOOT_DATA):-2] # _testing is 2 bytes
-
- # The data should be outside the FIT
- dtb = fdt.Fdt.FromData(fit_data)
- dtb.Scan()
- fnode = dtb.GetNode('/images/kernel')
- self.assertNotIn('data', fnode.props)
if __name__ == "__main__":
unittest.main()
diff --git a/tools/binman/image.py b/tools/binman/image.py
index a8772c3763..523b274c31 100644
--- a/tools/binman/image.py
+++ b/tools/binman/image.py
@@ -45,7 +45,7 @@ class Image(section.Entry_section):
we create a section manually.
"""
def __init__(self, name, node, copy_to_orig=True, test=False):
- super().__init__(None, 'section', node, test=test)
+ section.Entry_section.__init__(self, None, 'section', node, test=test)
self.copy_to_orig = copy_to_orig
self.name = 'main-section'
self.image_name = name
@@ -57,7 +57,7 @@ class Image(section.Entry_section):
self.ReadNode()
def ReadNode(self):
- super().ReadNode()
+ section.Entry_section.ReadNode(self)
filename = fdt_util.GetString(self._node, 'filename')
if filename:
self._filename = filename
@@ -116,11 +116,11 @@ class Image(section.Entry_section):
def PackEntries(self):
"""Pack all entries into the image"""
- super().Pack(0)
+ section.Entry_section.Pack(self, 0)
def SetImagePos(self):
# This first section in the image so it starts at 0
- super().SetImagePos(0)
+ section.Entry_section.SetImagePos(self, 0)
def ProcessEntryContents(self):
"""Call the ProcessContents() method for each entry
@@ -139,7 +139,7 @@ class Image(section.Entry_section):
def WriteSymbols(self):
"""Write symbol values into binary files for access at run time"""
- super().WriteSymbols(self)
+ section.Entry_section.WriteSymbols(self, self)
def BuildImage(self):
"""Write the image to a file"""
@@ -161,7 +161,7 @@ class Image(section.Entry_section):
with open(fname, 'w') as fd:
print('%8s %8s %8s %s' % ('ImagePos', 'Offset', 'Size', 'Name'),
file=fd)
- super().WriteMap(fd, 0)
+ section.Entry_section.WriteMap(self, fd, 0)
return fname
def BuildEntryList(self):
diff --git a/tools/binman/main.py b/tools/binman/main.py
index e543a7d06a..efa7fa8386 100755
--- a/tools/binman/main.py
+++ b/tools/binman/main.py
@@ -26,7 +26,6 @@ from patman import test_util
# Bring in the libfdt module
sys.path.insert(2, 'scripts/dtc/pylibfdt')
-sys.path.insert(2, os.path.join(our_path, '../../scripts/dtc/pylibfdt'))
sys.path.insert(2, os.path.join(our_path,
'../../build-sandbox_spl/scripts/dtc/pylibfdt'))
@@ -89,18 +88,14 @@ def GetEntryModules(include_testing=True):
for item in glob_list
if include_testing or '_testing' not in item])
-def RunTestCoverage(toolpath):
+def RunTestCoverage():
"""Run the tests and check that we get 100% coverage"""
glob_list = GetEntryModules(False)
all_set = set([os.path.splitext(os.path.basename(item))[0]
for item in glob_list if '_testing' not in item])
- extra_args = ''
- if toolpath:
- for path in toolpath:
- extra_args += ' --toolpath %s' % path
test_util.RunTestCoverage('tools/binman/binman', None,
['*test*', '*main.py', 'tools/patman/*', 'tools/dtoc/*'],
- args.build_dir, all_set, extra_args or None)
+ args.build_dir, all_set)
def RunBinman(args):
"""Main entry point to binman once arguments are parsed
@@ -113,14 +108,9 @@ def RunBinman(args):
if not args.debug:
sys.tracebacklimit = 0
- # Provide a default toolpath in the hope of finding a mkimage built from
- # current source
- if not args.toolpath:
- args.toolpath = ['./tools', 'build-sandbox/tools']
-
if args.cmd == 'test':
if args.test_coverage:
- RunTestCoverage(args.toolpath)
+ RunTestCoverage()
else:
ret_code = RunTests(args.debug, args.verbosity, args.processes,
args.test_preserve_dirs, args.tests,
@@ -133,7 +123,7 @@ def RunBinman(args):
try:
ret_code = control.Binman(args)
except Exception as e:
- print('binman: %s' % e, file=sys.stderr)
+ print('binman: %s' % e)
if args.debug:
print()
traceback.print_exc()
diff --git a/tools/binman/test/156_mkimage.dts b/tools/binman/test/156_mkimage.dts
deleted file mode 100644
index 933b13143a..0000000000
--- a/tools/binman/test/156_mkimage.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- binman {
- size = <0x80>;
-
- mkimage {
- args = "-n test -T script";
-
- u-boot-spl {
- };
-
- _testing {
- return-contents-later;
- };
- };
- };
-};
diff --git a/tools/binman/test/157_blob_ext.dts b/tools/binman/test/157_blob_ext.dts
deleted file mode 100644
index 8afdd5339e..0000000000
--- a/tools/binman/test/157_blob_ext.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- binman {
- blob-ext {
- filename = "refcode.bin";
- };
- };
-};
diff --git a/tools/binman/test/158_blob_ext_missing.dts b/tools/binman/test/158_blob_ext_missing.dts
deleted file mode 100644
index d315e5592e..0000000000
--- a/tools/binman/test/158_blob_ext_missing.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- binman {
- size = <0x80>;
-
- blob-ext {
- filename = "missing-file";
- };
- };
-};
diff --git a/tools/binman/test/159_blob_ext_missing_sect.dts b/tools/binman/test/159_blob_ext_missing_sect.dts
deleted file mode 100644
index 5f14c54138..0000000000
--- a/tools/binman/test/159_blob_ext_missing_sect.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- binman {
- size = <0x80>;
-
- section {
- blob-ext {
- filename = "missing-file";
- };
- };
-
- blob-ext2 {
- type = "blob-ext";
- filename = "missing-file2";
- };
- };
-};
diff --git a/tools/binman/test/160_pack_overlap_zero.dts b/tools/binman/test/160_pack_overlap_zero.dts
deleted file mode 100644
index 731aa1cbe6..0000000000
--- a/tools/binman/test/160_pack_overlap_zero.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- binman {
- u-boot {
- };
-
- fill {
- size = <0>;
- offset = <3>;
- };
- };
-};
diff --git a/tools/binman/test/161_fit.dts b/tools/binman/test/161_fit.dts
deleted file mode 100644
index c52d760b73..0000000000
--- a/tools/binman/test/161_fit.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- binman {
- u-boot {
- };
- fit {
- description = "test-desc";
- #address-cells = <1>;
-
- images {
- kernel {
- description = "Vanilla Linux kernel";
- type = "kernel";
- arch = "ppc";
- os = "linux";
- compression = "gzip";
- load = <00000000>;
- entry = <00000000>;
- hash-1 {
- algo = "crc32";
- };
- hash-2 {
- algo = "sha1";
- };
- u-boot {
- };
- };
- fdt-1 {
- description = "Flattened Device Tree blob";
- type = "flat_dt";
- arch = "ppc";
- compression = "none";
- hash-1 {
- algo = "crc32";
- };
- hash-2 {
- algo = "sha1";
- };
- u-boot-spl-dtb {
- };
- };
- };
-
- configurations {
- default = "conf-1";
- conf-1 {
- description = "Boot Linux kernel with FDT blob";
- kernel = "kernel";
- fdt = "fdt-1";
- };
- };
- };
- u-boot-nodtb {
- };
- };
-};
diff --git a/tools/binman/test/162_fit_external.dts b/tools/binman/test/162_fit_external.dts
deleted file mode 100644
index 19518e05a5..0000000000
--- a/tools/binman/test/162_fit_external.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- binman {
- u-boot {
- };
- fit {
- fit,external-offset = <0>;
- description = "test-desc";
- #address-cells = <1>;
-
- images {
- kernel {
- description = "Vanilla Linux kernel";
- type = "kernel";
- arch = "ppc";
- os = "linux";
- compression = "gzip";
- load = <00000000>;
- entry = <00000000>;
- hash-1 {
- algo = "crc32";
- };
- hash-2 {
- algo = "sha1";
- };
- u-boot {
- };
- };
- fdt-1 {
- description = "Flattened Device Tree blob";
- type = "flat_dt";
- arch = "ppc";
- compression = "none";
- hash-1 {
- algo = "crc32";
- };
- hash-2 {
- algo = "sha1";
- };
- _testing {
- return-contents-later;
- };
- };
- };
-
- configurations {
- default = "conf-1";
- conf-1 {
- description = "Boot Linux kernel with FDT blob";
- kernel = "kernel";
- fdt = "fdt-1";
- };
- };
- };
- u-boot-nodtb {
- };
- };
-};
diff --git a/tools/dtoc/fdt.py b/tools/dtoc/fdt.py
index d058c59e92..188490b728 100644
--- a/tools/dtoc/fdt.py
+++ b/tools/dtoc/fdt.py
@@ -207,8 +207,7 @@ class Prop:
if auto_resize:
while fdt_obj.setprop(node.Offset(), self.name, self.bytes,
(libfdt.NOSPACE,)) == -libfdt.NOSPACE:
- fdt_obj.resize(fdt_obj.totalsize() + 1024 +
- len(self.bytes))
+ fdt_obj.resize(fdt_obj.totalsize() + 1024)
fdt_obj.setprop(node.Offset(), self.name, self.bytes)
else:
fdt_obj.setprop(node.Offset(), self.name, self.bytes)
@@ -411,18 +410,6 @@ class Node:
val = val.encode('utf-8')
self._CheckProp(prop_name).props[prop_name].SetData(val + b'\0')
- def AddData(self, prop_name, val):
- """Add a new property to a node
-
- The device tree is marked dirty so that the value will be written to
- the blob on the next sync.
-
- Args:
- prop_name: Name of property to add
- val: Bytes value of property
- """
- self.props[prop_name] = Prop(self, None, prop_name, val)
-
def AddString(self, prop_name, val):
"""Add a new string property to a node
@@ -435,7 +422,7 @@ class Node:
"""
if sys.version_info[0] >= 3: # pragma: no cover
val = bytes(val, 'utf-8')
- self.AddData(prop_name, val + b'\0')
+ self.props[prop_name] = Prop(self, None, prop_name, val + b'\0')
def AddSubnode(self, name):
"""Add a new subnode to the node
diff --git a/tools/dtoc/test_fdt.py b/tools/dtoc/test_fdt.py
index b4f9b7f498..375e906424 100755
--- a/tools/dtoc/test_fdt.py
+++ b/tools/dtoc/test_fdt.py
@@ -417,10 +417,6 @@ class TestProp(unittest.TestCase):
self.node.SetData('empty', b'123')
self.assertEqual(b'123', prop.bytes)
- # Trying adding a lot of data at once
- self.node.AddData('data', tools.GetBytes(65, 20000))
- self.dtb.Sync(auto_resize=True)
-
def testFromData(self):
dtb2 = fdt.Fdt.FromData(self.dtb.GetContents())
self.assertEqual(dtb2.GetContents(), self.dtb.GetContents())
diff --git a/tools/fit_image.c b/tools/fit_image.c
index df310b53da..a082d9386d 100644
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
@@ -53,7 +53,7 @@ static int fit_add_file_data(struct image_tool_params *params, size_t size_inc,
}
/* for first image creation, add a timestamp at offset 0 i.e., root */
- if (params->datafile || params->reset_timestamp) {
+ if (params->datafile) {
time_t time = imagetool_get_source_date(params->cmdname,
sbuf.st_mtime);
ret = fit_set_timestamp(ptr, 0, time);
diff --git a/tools/imagetool.h b/tools/imagetool.h
index acbc48e9be..f54809cd57 100644
--- a/tools/imagetool.h
+++ b/tools/imagetool.h
@@ -81,7 +81,6 @@ struct image_tool_params {
unsigned int external_offset; /* Add padding to external data */
int bl_len; /* Block length in byte for external data */
const char *engine_id; /* Engine to use for signing */
- bool reset_timestamp; /* Reset the timestamp on an existing image */
};
/*
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 43078d075c..7cb666d482 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -145,7 +145,7 @@ static void process_args(int argc, char **argv)
int opt;
while ((opt = getopt(argc, argv,
- "a:A:b:B:c:C:d:D:e:Ef:Fk:i:K:ln:N:p:O:rR:qstT:vVx")) != -1) {
+ "a:A:b:B:c:C:d:D:e:Ef:Fk:i:K:ln:N:p:O:rR:qsT:vVx")) != -1) {
switch (opt) {
case 'a':
params.addr = strtoull(optarg, &ptr, 16);
@@ -269,9 +269,6 @@ static void process_args(int argc, char **argv)
case 's':
params.skipcpy = 1;
break;
- case 't':
- params.reset_timestamp = 1;
- break;
case 'T':
if (strcmp(optarg, "list") == 0) {
show_valid_options(IH_TYPE);
diff --git a/tools/patman/checkpatch.py b/tools/patman/checkpatch.py
index 263bac3fc9..07c3e2739a 100644
--- a/tools/patman/checkpatch.py
+++ b/tools/patman/checkpatch.py
@@ -41,12 +41,6 @@ def FindCheckPatch():
def CheckPatch(fname, verbose=False, show_types=False):
"""Run checkpatch.pl on a file.
- Args:
- fname: Filename to check
- verbose: True to print out every line of the checkpatch output as it is
- parsed
- show_types: Tell checkpatch to show the type (number) of each message
-
Returns:
namedtuple containing:
ok: False=failure, True=ok
diff --git a/tools/patman/commit.py b/tools/patman/commit.py
index 8d583c4ed3..48d0529c53 100644
--- a/tools/patman/commit.py
+++ b/tools/patman/commit.py
@@ -2,7 +2,6 @@
# Copyright (c) 2011 The Chromium OS Authors.
#
-import collections
import re
# Separates a tag: at the beginning of the subject from the rest of it
@@ -24,9 +23,6 @@ class Commit:
notes: List of lines in the commit (not series) notes
change_id: the Change-Id: tag that was stripped from this commit
and can be used to generate the Message-Id.
- rtags: Response tags (e.g. Reviewed-by) collected by the commit, dict:
- key: rtag type (e.g. 'Reviewed-by')
- value: Set of people who gave that rtag, each a name/email string
"""
def __init__(self, hash):
self.hash = hash
@@ -37,7 +33,6 @@ class Commit:
self.signoff_set = set()
self.notes = []
self.change_id = None
- self.rtags = collections.defaultdict(set)
def AddChange(self, version, info):
"""Add a new change line to the change list for a version.
@@ -93,12 +88,3 @@ class Commit:
return False
self.signoff_set.add(signoff)
return True
-
- def AddRtag(self, rtag_type, who):
- """Add a response tag to a commit
-
- Args:
- key: rtag type (e.g. 'Reviewed-by')
- who: Person who gave that rtag, e.g. 'Fred Bloggs <fred@bloggs.org>'
- """
- self.rtags[rtag_type].add(who)
diff --git a/tools/patman/control.py b/tools/patman/control.py
deleted file mode 100644
index 67e8f397ef..0000000000
--- a/tools/patman/control.py
+++ /dev/null
@@ -1,178 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2020 Google LLC
-#
-"""Handles the main control logic of patman
-
-This module provides various functions called by the main program to implement
-the features of patman.
-"""
-
-import os
-import sys
-
-from patman import checkpatch
-from patman import gitutil
-from patman import patchstream
-from patman import terminal
-
-def setup():
- """Do required setup before doing anything"""
- gitutil.Setup()
-
-def prepare_patches(col, branch, count, start, end, ignore_binary):
- """Figure out what patches to generate, then generate them
-
- The patch files are written to the current directory, e.g. 0001_xxx.patch
- 0002_yyy.patch
-
- Args:
- col (terminal.Color): Colour output object
- branch (str): Branch to create patches from (None = current)
- count (int): Number of patches to produce, or -1 to produce patches for
- the current branch back to the upstream commit
- start (int): Start partch to use (0=first / top of branch)
- end (int): End patch to use (0=last one in series, 1=one before that,
- etc.)
- ignore_binary (bool): Don't generate patches for binary files
-
- Returns:
- Tuple:
- Series object for this series (set of patches)
- Filename of the cover letter as a string (None if none)
- patch_files: List of patch filenames, each a string, e.g.
- ['0001_xxx.patch', '0002_yyy.patch']
- """
- if count == -1:
- # Work out how many patches to send if we can
- count = (gitutil.CountCommitsToBranch(branch) - start)
-
- if not count:
- str = 'No commits found to process - please use -c flag, or run:\n' \
- ' git branch --set-upstream-to remote/branch'
- sys.exit(col.Color(col.RED, str))
-
- # Read the metadata from the commits
- to_do = count - end
- series = patchstream.GetMetaData(branch, start, to_do)
- cover_fname, patch_files = gitutil.CreatePatches(
- branch, start, to_do, ignore_binary, series)
-
- # Fix up the patch files to our liking, and insert the cover letter
- patchstream.FixPatches(series, patch_files)
- if cover_fname and series.get('cover'):
- patchstream.InsertCoverLetter(cover_fname, series, to_do)
- return series, cover_fname, patch_files
-
-def check_patches(series, patch_files, run_checkpatch, verbose):
- """Run some checks on a set of patches
-
- This santiy-checks the patman tags like Series-version and runs the patches
- through checkpatch
-
- Args:
- series (Series): Series object for this series (set of patches)
- patch_files (list): List of patch filenames, each a string, e.g.
- ['0001_xxx.patch', '0002_yyy.patch']
- run_checkpatch (bool): True to run checkpatch.pl
- verbose (bool): True to print out every line of the checkpatch output as
- it is parsed
-
- Returns:
- bool: True if the patches had no errors, False if they did
- """
- # Do a few checks on the series
- series.DoChecks()
-
- # Check the patches, and run them through 'git am' just to be sure
- if run_checkpatch:
- ok = checkpatch.CheckPatches(verbose, patch_files)
- else:
- ok = True
- return ok
-
-
-def email_patches(col, series, cover_fname, patch_files, process_tags, its_a_go,
- ignore_bad_tags, add_maintainers, limit, dry_run, in_reply_to,
- thread, smtp_server):
- """Email patches to the recipients
-
- This emails out the patches and cover letter using 'git send-email'. Each
- patch is copied to recipients identified by the patch tag and output from
- the get_maintainer.pl script. The cover letter is copied to all recipients
- of any patch.
-
- To make this work a CC file is created holding the recipients for each patch
- and the cover letter. See the main program 'cc_cmd' for this logic.
-
- Args:
- col (terminal.Color): Colour output object
- series (Series): Series object for this series (set of patches)
- cover_fname (str): Filename of the cover letter as a string (None if
- none)
- patch_files (list): List of patch filenames, each a string, e.g.
- ['0001_xxx.patch', '0002_yyy.patch']
- process_tags (bool): True to process subject tags in each patch, e.g.
- for 'dm: spi: Add SPI support' this would be 'dm' and 'spi'. The
- tags are looked up in the configured sendemail.aliasesfile and also
- in ~/.patman (see README)
- its_a_go (bool): True if we are going to actually send the patches,
- False if the patches have errors and will not be sent unless
- @ignore_errors
- ignore_bad_tags (bool): True to just print a warning for unknown tags,
- False to halt with an error
- add_maintainers (bool): Run the get_maintainer.pl script for each patch
- limit (int): Limit on the number of people that can be cc'd on a single
- patch or the cover letter (None if no limit)
- dry_run (bool): Don't actually email the patches, just print out what
- would be sent
- in_reply_to (str): If not None we'll pass this to git as --in-reply-to.
- Should be a message ID that this is in reply to.
- thread (bool): True to add --thread to git send-email (make all patches
- reply to cover-letter or first patch in series)
- smtp_server (str): SMTP server to use to send patches (None for default)
- """
- cc_file = series.MakeCcFile(process_tags, cover_fname, not ignore_bad_tags,
- add_maintainers, limit)
-
- # Email the patches out (giving the user time to check / cancel)
- cmd = ''
- if its_a_go:
- cmd = gitutil.EmailPatches(
- series, cover_fname, patch_files, dry_run, not ignore_bad_tags,
- cc_file, in_reply_to=in_reply_to, thread=thread,
- smtp_server=smtp_server)
- else:
- print(col.Color(col.RED, "Not sending emails due to errors/warnings"))
-
- # For a dry run, just show our actions as a sanity check
- if dry_run:
- series.ShowActions(patch_files, cmd, process_tags)
- if not its_a_go:
- print(col.Color(col.RED, "Email would not be sent"))
-
- os.remove(cc_file)
-
-def send(args):
- """Create, check and send patches by email
-
- Args:
- args (argparse.Namespace): Arguments to patman
- """
- setup()
- col = terminal.Color()
- series, cover_fname, patch_files = prepare_patches(
- col, args.branch, args.count, args.start, args.end,
- args.ignore_binary)
- ok = check_patches(series, patch_files, args.check_patch,
- args.verbose)
-
- ok = ok and gitutil.CheckSuppressCCConfig()
-
- its_a_go = ok or args.ignore_errors
- if its_a_go:
- email_patches(
- col, series, cover_fname, patch_files, args.process_tags,
- its_a_go, args.ignore_bad_tags, args.add_maintainers,
- args.limit, args.dry_run, args.in_reply_to, args.thread,
- args.smtp_server)
diff --git a/tools/patman/func_test.py b/tools/patman/func_test.py
index 810af9c604..dc30078cce 100644
--- a/tools/patman/func_test.py
+++ b/tools/patman/func_test.py
@@ -14,23 +14,15 @@ import unittest
from io import StringIO
-from patman import control
from patman import gitutil
from patman import patchstream
from patman import settings
-from patman import terminal
from patman import tools
-from patman.test_util import capture_sys_output
-
-try:
- import pygit2
- HAVE_PYGIT2= True
-except ModuleNotFoundError:
- HAVE_PYGIT2 = False
@contextlib.contextmanager
def capture():
+ import sys
oldout,olderr = sys.stdout, sys.stderr
try:
out=[StringIO(), StringIO()]
@@ -45,8 +37,6 @@ def capture():
class TestFunctional(unittest.TestCase):
def setUp(self):
self.tmpdir = tempfile.mkdtemp(prefix='patman.')
- self.gitdir = os.path.join(self.tmpdir, 'git')
- self.repo = None
def tearDown(self):
shutil.rmtree(self.tmpdir)
@@ -296,160 +286,3 @@ Changes in v2:
if expected:
expected = expected.splitlines()
self.assertEqual(expected, lines[start:(start+len(expected))])
-
- def make_commit_with_file(self, subject, body, fname, text):
- """Create a file and add it to the git repo with a new commit
-
- Args:
- subject (str): Subject for the commit
- body (str): Body text of the commit
- fname (str): Filename of file to create
- text (str): Text to put into the file
- """
- path = os.path.join(self.gitdir, fname)
- tools.WriteFile(path, text, binary=False)
- index = self.repo.index
- index.add(fname)
- author = pygit2.Signature('Test user', 'test@email.com')
- committer = author
- tree = index.write_tree()
- message = subject + '\n' + body
- self.repo.create_commit('HEAD', author, committer, message, tree,
- [self.repo.head.target])
-
- def make_git_tree(self):
- """Make a simple git tree suitable for testing
-
- It has three branches:
- 'base' has two commits: PCI, main
- 'first' has base as upstream and two more commits: I2C, SPI
- 'second' has base as upstream and three more: video, serial, bootm
-
- Returns:
- pygit2 repository
- """
- repo = pygit2.init_repository(self.gitdir)
- self.repo = repo
- new_tree = repo.TreeBuilder().write()
-
- author = pygit2.Signature('Test user', 'test@email.com')
- committer = author
- commit = repo.create_commit('HEAD', author, committer,
- 'Created master', new_tree, [])
-
- self.make_commit_with_file('Initial commit', '''
-Add a README
-
-''', 'README', '''This is the README file
-describing this project
-in very little detail''')
-
- self.make_commit_with_file('pci: PCI implementation', '''
-Here is a basic PCI implementation
-
-''', 'pci.c', '''This is a file
-it has some contents
-and some more things''')
- self.make_commit_with_file('main: Main program', '''
-Hello here is the second commit.
-''', 'main.c', '''This is the main file
-there is very little here
-but we can always add more later
-if we want to
-
-Series-to: u-boot
-Series-cc: Barry Crump <bcrump@whataroa.nz>
-''')
- base_target = repo.revparse_single('HEAD')
- self.make_commit_with_file('i2c: I2C things', '''
-This has some stuff to do with I2C
-''', 'i2c.c', '''And this is the file contents
-with some I2C-related things in it''')
- self.make_commit_with_file('spi: SPI fixes', '''
-SPI needs some fixes
-and here they are
-''', 'spi.c', '''Some fixes for SPI in this
-file to make SPI work
-better than before''')
- first_target = repo.revparse_single('HEAD')
-
- target = repo.revparse_single('HEAD~2')
- repo.reset(target.oid, pygit2.GIT_CHECKOUT_FORCE)
- self.make_commit_with_file('video: Some video improvements', '''
-Fix up the video so that
-it looks more purple. Purple is
-a very nice colour.
-''', 'video.c', '''More purple here
-Purple and purple
-Even more purple
-Could not be any more purple''')
- self.make_commit_with_file('serial: Add a serial driver', '''
-Here is the serial driver
-for my chip.
-
-Cover-letter:
-Series for my board
-This series implements support
-for my glorious board.
-END
-''', 'serial.c', '''The code for the
-serial driver is here''')
- self.make_commit_with_file('bootm: Make it boot', '''
-This makes my board boot
-with a fix to the bootm
-command
-''', 'bootm.c', '''Fix up the bootm
-command to make the code as
-complicated as possible''')
- second_target = repo.revparse_single('HEAD')
-
- repo.branches.local.create('first', first_target)
- repo.config.set_multivar('branch.first.remote', '', '.')
- repo.config.set_multivar('branch.first.merge', '', 'refs/heads/base')
-
- repo.branches.local.create('second', second_target)
- repo.config.set_multivar('branch.second.remote', '', '.')
- repo.config.set_multivar('branch.second.merge', '', 'refs/heads/base')
-
- repo.branches.local.create('base', base_target)
- return repo
-
- @unittest.skipIf(not HAVE_PYGIT2, 'Missing python3-pygit2')
- def testBranch(self):
- """Test creating patches from a branch"""
- repo = self.make_git_tree()
- target = repo.lookup_reference('refs/heads/first')
- self.repo.checkout(target, strategy=pygit2.GIT_CHECKOUT_FORCE)
- control.setup()
- try:
- orig_dir = os.getcwd()
- os.chdir(self.gitdir)
-
- # Check that it can detect the current branch
- self.assertEqual(2, gitutil.CountCommitsToBranch(None))
- col = terminal.Color()
- with capture_sys_output() as _:
- _, cover_fname, patch_files = control.prepare_patches(
- col, branch=None, count=-1, start=0, end=0,
- ignore_binary=False)
- self.assertIsNone(cover_fname)
- self.assertEqual(2, len(patch_files))
-
- # Check that it can detect a different branch
- self.assertEqual(3, gitutil.CountCommitsToBranch('second'))
- with capture_sys_output() as _:
- _, cover_fname, patch_files = control.prepare_patches(
- col, branch='second', count=-1, start=0, end=0,
- ignore_binary=False)
- self.assertIsNotNone(cover_fname)
- self.assertEqual(3, len(patch_files))
-
- # Check that it can skip patches at the end
- with capture_sys_output() as _:
- _, cover_fname, patch_files = control.prepare_patches(
- col, branch='second', count=-1, start=0, end=1,
- ignore_binary=False)
- self.assertIsNotNone(cover_fname)
- self.assertEqual(2, len(patch_files))
- finally:
- os.chdir(orig_dir)
diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py
index 192d8e69b3..5189840eab 100644
--- a/tools/patman/gitutil.py
+++ b/tools/patman/gitutil.py
@@ -49,24 +49,17 @@ def LogCmd(commit_range, git_dir=None, oneline=False, reverse=False,
cmd.append('--')
return cmd
-def CountCommitsToBranch(branch):
+def CountCommitsToBranch():
"""Returns number of commits between HEAD and the tracking branch.
This looks back to the tracking branch and works out the number of commits
since then.
- Args:
- branch: Branch to count from (None for current branch)
-
Return:
Number of patches that exist on top of the branch
"""
- if branch:
- us, msg = GetUpstream('.git', branch)
- rev_range = '%s..%s' % (us, branch)
- else:
- rev_range = '@{upstream}..'
- pipe = [LogCmd(rev_range, oneline=True), ['wc', '-l']]
+ pipe = [LogCmd('@{upstream}..', oneline=True),
+ ['wc', '-l']]
stdout = command.RunPipe(pipe, capture=True, oneline=True).stdout
patch_count = int(stdout)
return patch_count
@@ -259,20 +252,17 @@ def Fetch(git_dir=None, work_tree=None):
if result.return_code != 0:
raise OSError('git fetch: %s' % result.stderr)
-def CreatePatches(branch, start, count, ignore_binary, series):
+def CreatePatches(start, count, ignore_binary, series):
"""Create a series of patches from the top of the current branch.
The patch files are written to the current directory using
git format-patch.
Args:
- branch: Branch to create patches from (None for current branch)
start: Commit to start from: 0=HEAD, 1=next one, etc.
count: number of commits to include
- ignore_binary: Don't generate patches for binary files
- series: Series object for this series (set of patches)
Return:
- Filename of cover letter (None if none)
+ Filename of cover letter
List of filenames of patch files
"""
if series.get('version'):
@@ -285,8 +275,7 @@ def CreatePatches(branch, start, count, ignore_binary, series):
prefix = series.GetPatchPrefix()
if prefix:
cmd += ['--subject-prefix=%s' % prefix]
- brname = branch or 'HEAD'
- cmd += ['%s~%d..%s~%d' % (brname, start + count, brname, start)]
+ cmd += ['HEAD~%d..HEAD~%d' % (start + count, start)]
stdout = command.RunList(cmd)
files = stdout.splitlines()
@@ -344,31 +333,6 @@ def BuildEmailList(in_list, tag=None, alias=None, raise_on_error=True):
return ['%s %s%s%s' % (tag, quote, email, quote) for email in result]
return result
-def CheckSuppressCCConfig():
- """Check if sendemail.suppresscc is configured correctly.
-
- Returns:
- True if the option is configured correctly, False otherwise.
- """
- suppresscc = command.OutputOneLine('git', 'config', 'sendemail.suppresscc',
- raise_on_error=False)
-
- # Other settings should be fine.
- if suppresscc == 'all' or suppresscc == 'cccmd':
- col = terminal.Color()
-
- print((col.Color(col.RED, "error") +
- ": git config sendemail.suppresscc set to %s\n" % (suppresscc)) +
- " patman needs --cc-cmd to be run to set the cc list.\n" +
- " Please run:\n" +
- " git config --unset sendemail.suppresscc\n" +
- " Or read the man page:\n" +
- " git send-email --help\n" +
- " and set an option that runs --cc-cmd\n")
- return False
-
- return True
-
def EmailPatches(series, cover_fname, args, dry_run, raise_on_error, cc_fname,
self_only=False, alias=None, in_reply_to=None, thread=False,
smtp_server=None):
diff --git a/tools/patman/main.py b/tools/patman/main.py
index b96000807e..28a9a26087 100755
--- a/tools/patman/main.py
+++ b/tools/patman/main.py
@@ -6,11 +6,10 @@
"""See README for more information"""
-from argparse import ArgumentParser
+from optparse import OptionParser
import os
import re
import sys
-import traceback
import unittest
if __name__ == "__main__":
@@ -19,93 +18,76 @@ if __name__ == "__main__":
sys.path.append(os.path.join(our_path, '..'))
# Our modules
+from patman import checkpatch
from patman import command
-from patman import control
from patman import gitutil
+from patman import patchstream
from patman import project
from patman import settings
from patman import terminal
-from patman import test_util
from patman import test_checkpatch
-def AddCommonArgs(parser):
- parser.add_argument('-b', '--branch', type=str,
- help="Branch to process (by default, the current branch)")
- parser.add_argument('-c', '--count', dest='count', type=int,
- default=-1, help='Automatically create patches from top n commits')
- parser.add_argument('-e', '--end', type=int, default=0,
- help='Commits to skip at end of patch list')
- parser.add_argument('-D', '--debug', action='store_true',
- help='Enabling debugging (provides a full traceback on error)')
- parser.add_argument('-s', '--start', dest='start', type=int,
- default=0, help='Commit to start creating patches from (0 = HEAD)')
-
-epilog = '''Create patches from commits in a branch, check them and email them
-as specified by tags you place in the commits. Use -n to do a dry run first.'''
-
-parser = ArgumentParser(epilog=epilog)
-subparsers = parser.add_subparsers(dest='cmd')
-send = subparsers.add_parser('send')
-send.add_argument('-H', '--full-help', action='store_true', dest='full_help',
+
+parser = OptionParser()
+parser.add_option('-H', '--full-help', action='store_true', dest='full_help',
default=False, help='Display the README file')
-send.add_argument('-i', '--ignore-errors', action='store_true',
+parser.add_option('-c', '--count', dest='count', type='int',
+ default=-1, help='Automatically create patches from top n commits')
+parser.add_option('-i', '--ignore-errors', action='store_true',
dest='ignore_errors', default=False,
help='Send patches email even if patch errors are found')
-send.add_argument('-l', '--limit-cc', dest='limit', type=int, default=None,
- help='Limit the cc list to LIMIT entries [default: %(default)s]')
-send.add_argument('-m', '--no-maintainers', action='store_false',
+parser.add_option('-l', '--limit-cc', dest='limit', type='int',
+ default=None, help='Limit the cc list to LIMIT entries [default: %default]')
+parser.add_option('-m', '--no-maintainers', action='store_false',
dest='add_maintainers', default=True,
help="Don't cc the file maintainers automatically")
-send.add_argument('-n', '--dry-run', action='store_true', dest='dry_run',
+parser.add_option('-n', '--dry-run', action='store_true', dest='dry_run',
default=False, help="Do a dry run (create but don't email patches)")
-send.add_argument('-p', '--project', default=project.DetectProject(),
+parser.add_option('-p', '--project', default=project.DetectProject(),
help="Project name; affects default option values and "
- "aliases [default: %(default)s]")
-send.add_argument('-r', '--in-reply-to', type=str, action='store',
+ "aliases [default: %default]")
+parser.add_option('-r', '--in-reply-to', type='string', action='store',
help="Message ID that this series is in reply to")
-send.add_argument('-t', '--ignore-bad-tags', action='store_true',
+parser.add_option('-s', '--start', dest='start', type='int',
+ default=0, help='Commit to start creating patches from (0 = HEAD)')
+parser.add_option('-t', '--ignore-bad-tags', action='store_true',
default=False, help='Ignore bad tags / aliases')
-send.add_argument('-v', '--verbose', action='store_true', dest='verbose',
+parser.add_option('-v', '--verbose', action='store_true', dest='verbose',
default=False, help='Verbose output of errors and warnings')
-send.add_argument('-T', '--thread', action='store_true', dest='thread',
+parser.add_option('-T', '--thread', action='store_true', dest='thread',
default=False, help='Create patches as a single thread')
-send.add_argument('--cc-cmd', dest='cc_cmd', type=str, action='store',
+parser.add_option('--cc-cmd', dest='cc_cmd', type='string', action='store',
default=None, help='Output cc list for patch file (used by git)')
-send.add_argument('--no-binary', action='store_true', dest='ignore_binary',
+parser.add_option('--no-binary', action='store_true', dest='ignore_binary',
default=False,
help="Do not output contents of changes in binary files")
-send.add_argument('--no-check', action='store_false', dest='check_patch',
+parser.add_option('--no-check', action='store_false', dest='check_patch',
default=True,
help="Don't check for patch compliance")
-send.add_argument('--no-tags', action='store_false', dest='process_tags',
+parser.add_option('--no-tags', action='store_false', dest='process_tags',
default=True, help="Don't process subject tags as aliases")
-send.add_argument('--smtp-server', type=str,
+parser.add_option('--smtp-server', type='str',
help="Specify the SMTP server to 'git send-email'")
-AddCommonArgs(send)
+parser.add_option('--test', action='store_true', dest='test',
+ default=False, help='run tests')
+
+parser.usage += """
-send.add_argument('patchfiles', nargs='*')
+Create patches from commits in a branch, check them and email them as
+specified by tags you place in the commits. Use -n to do a dry run first."""
-test_parser = subparsers.add_parser('test', help='Run tests')
-AddCommonArgs(test_parser)
# Parse options twice: first to get the project and second to handle
# defaults properly (which depends on project).
-argv = sys.argv[1:]
-if len(argv) < 1 or argv[0].startswith('-'):
- argv = ['send'] + argv
-args = parser.parse_args(argv)
-if hasattr(args, 'project'):
- settings.Setup(gitutil, send, args.project, '')
- args = parser.parse_args(argv)
+(options, args) = parser.parse_args()
+settings.Setup(gitutil, parser, options.project, '')
+(options, args) = parser.parse_args()
if __name__ != "__main__":
pass
-if not args.debug:
- sys.tracebacklimit = 0
-
# Run our meagre tests
-if args.cmd == 'test':
+elif options.test:
import doctest
from patman import func_test
@@ -119,31 +101,87 @@ if args.cmd == 'test':
suite = doctest.DocTestSuite(module)
suite.run(result)
- sys.exit(test_util.ReportResult('patman', None, result))
+ # TODO: Surely we can just 'print' result?
+ print(result)
+ for test, err in result.errors:
+ print(err)
+ for test, err in result.failures:
+ print(err)
+
+# Called from git with a patch filename as argument
+# Printout a list of additional CC recipients for this patch
+elif options.cc_cmd:
+ fd = open(options.cc_cmd, 'r')
+ re_line = re.compile('(\S*) (.*)')
+ for line in fd.readlines():
+ match = re_line.match(line)
+ if match and match.group(1) == args[0]:
+ for cc in match.group(2).split('\0'):
+ cc = cc.strip()
+ if cc:
+ print(cc)
+ fd.close()
+
+elif options.full_help:
+ pager = os.getenv('PAGER')
+ if not pager:
+ pager = 'more'
+ fname = os.path.join(os.path.dirname(os.path.realpath(sys.argv[0])),
+ 'README')
+ command.Run(pager, fname)
# Process commits, produce patches files, check them, email them
-elif args.cmd == 'send':
- # Called from git with a patch filename as argument
- # Printout a list of additional CC recipients for this patch
- if args.cc_cmd:
- fd = open(args.cc_cmd, 'r')
- re_line = re.compile('(\S*) (.*)')
- for line in fd.readlines():
- match = re_line.match(line)
- if match and match.group(1) == args.patchfiles[0]:
- for cc in match.group(2).split('\0'):
- cc = cc.strip()
- if cc:
- print(cc)
- fd.close()
-
- elif args.full_help:
- pager = os.getenv('PAGER')
- if not pager:
- pager = 'more'
- fname = os.path.join(os.path.dirname(os.path.realpath(sys.argv[0])),
- 'README')
- command.Run(pager, fname)
-
+else:
+ gitutil.Setup()
+
+ if options.count == -1:
+ # Work out how many patches to send if we can
+ options.count = gitutil.CountCommitsToBranch() - options.start
+
+ col = terminal.Color()
+ if not options.count:
+ str = 'No commits found to process - please use -c flag'
+ sys.exit(col.Color(col.RED, str))
+
+ # Read the metadata from the commits
+ if options.count:
+ series = patchstream.GetMetaData(options.start, options.count)
+ cover_fname, args = gitutil.CreatePatches(options.start, options.count,
+ options.ignore_binary, series)
+
+ # Fix up the patch files to our liking, and insert the cover letter
+ patchstream.FixPatches(series, args)
+ if cover_fname and series.get('cover'):
+ patchstream.InsertCoverLetter(cover_fname, series, options.count)
+
+ # Do a few checks on the series
+ series.DoChecks()
+
+ # Check the patches, and run them through 'git am' just to be sure
+ if options.check_patch:
+ ok = checkpatch.CheckPatches(options.verbose, args)
else:
- control.send(args)
+ ok = True
+
+ cc_file = series.MakeCcFile(options.process_tags, cover_fname,
+ not options.ignore_bad_tags,
+ options.add_maintainers, options.limit)
+
+ # Email the patches out (giving the user time to check / cancel)
+ cmd = ''
+ its_a_go = ok or options.ignore_errors
+ if its_a_go:
+ cmd = gitutil.EmailPatches(series, cover_fname, args,
+ options.dry_run, not options.ignore_bad_tags, cc_file,
+ in_reply_to=options.in_reply_to, thread=options.thread,
+ smtp_server=options.smtp_server)
+ else:
+ print(col.Color(col.RED, "Not sending emails due to errors/warnings"))
+
+ # For a dry run, just show our actions as a sanity check
+ if options.dry_run:
+ series.ShowActions(args, cmd, options.process_tags)
+ if not its_a_go:
+ print(col.Color(col.RED, "Email would not be sent"))
+
+ os.remove(cc_file)
diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py
index ba0a13f632..4fe465e9ab 100644
--- a/tools/patman/patchstream.py
+++ b/tools/patman/patchstream.py
@@ -37,7 +37,7 @@ re_change_id = re.compile('^Change-Id: *(.*)')
re_commit_tag = re.compile('^Commit-([a-z-]*): *(.*)')
# Commit tags that we want to collect and keep
-re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Patch-cc|Fixes): (.*)')
+re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Patch-cc): (.*)')
# The start of a new commit in the git log
re_commit = re.compile('^commit ([0-9a-f]*)$')
@@ -112,15 +112,6 @@ class PatchStream:
self.in_section = 'commit-' + name
self.skip_blank = False
- def AddCommitRtag(self, rtag_type, who):
- """Add a response tag to the current commit
-
- Args:
- key: rtag type (e.g. 'Reviewed-by')
- who: Person who gave that rtag, e.g. 'Fred Bloggs <fred@bloggs.org>'
- """
- self.commit.AddRtag(rtag_type, who)
-
def CloseCommit(self):
"""Save the current commit into our commit list, and reset our state"""
if self.commit and self.is_log:
@@ -269,10 +260,6 @@ class PatchStream:
else:
self.section.append(line)
- # If we are not in a section, it is an unexpected END
- elif line == 'END':
- raise ValueError("'END' wihout section")
-
# Detect the commit subject
elif not is_blank and self.state == STATE_PATCH_SUBJECT:
self.commit.subject = line
@@ -351,9 +338,6 @@ class PatchStream:
elif name == 'changes':
self.in_change = 'Commit'
self.change_version = self.ParseVersion(value, line)
- else:
- self.warn.append('Line %d: Ignoring Commit-%s' %
- (self.linenum, name))
# Detect the start of a new commit
elif commit_match:
@@ -362,14 +346,12 @@ class PatchStream:
# Detect tags in the commit message
elif tag_match:
- rtag_type, who = tag_match.groups()
- self.AddCommitRtag(rtag_type, who)
# Remove Tested-by self, since few will take much notice
- if (rtag_type == 'Tested-by' and
- who.find(os.getenv('USER') + '@') != -1):
+ if (tag_match.group(1) == 'Tested-by' and
+ tag_match.group(2).find(os.getenv('USER') + '@') != -1):
self.warn.append("Ignoring %s" % line)
- elif rtag_type == 'Patch-cc':
- self.commit.AddCc(who.split(','))
+ elif tag_match.group(1) == 'Patch-cc':
+ self.commit.AddCc(tag_match.group(2).split(','))
else:
out = [line]
@@ -530,19 +512,17 @@ def GetMetaDataForList(commit_range, git_dir=None, count=None,
ps.Finalize()
return series
-def GetMetaData(branch, start, count):
+def GetMetaData(start, count):
"""Reads out patch series metadata from the commits
This does a 'git log' on the relevant commits and pulls out the tags we
are interested in.
Args:
- branch: Branch to use (None for current branch)
- start: Commit to start from: 0=branch HEAD, 1=next one, etc.
+ start: Commit to start from: 0=HEAD, 1=next one, etc.
count: Number of commits to list
"""
- return GetMetaDataForList('%s~%d' % (branch if branch else 'HEAD', start),
- None, count)
+ return GetMetaDataForList('HEAD~%d' % start, None, count)
def GetMetaDataForTest(text):
"""Process metadata from a file containing a git log. Used for tests
diff --git a/tools/patman/series.py b/tools/patman/series.py
index 9f885c8987..b7eef37d03 100644
--- a/tools/patman/series.py
+++ b/tools/patman/series.py
@@ -244,7 +244,7 @@ class Series(dict):
add_maintainers: Either:
True/False to call the get_maintainers to CC maintainers
List of maintainers to include (for testing)
- limit: Limit the length of the Cc list (None if no limit)
+ limit: Limit the length of the Cc list
Return:
Filename of temp file created
"""
diff --git a/tools/patman/settings.py b/tools/patman/settings.py
index 732bd40106..635561ac05 100644
--- a/tools/patman/settings.py
+++ b/tools/patman/settings.py
@@ -233,19 +233,17 @@ def _UpdateDefaults(parser, config):
config: An instance of _ProjectConfigParser that we will query
for settings.
"""
- defaults = parser.parse_known_args()[0]
- defaults = vars(defaults)
+ defaults = parser.get_default_values()
for name, val in config.items('settings'):
- if name in defaults:
- default_val = defaults[name]
+ if hasattr(defaults, name):
+ default_val = getattr(defaults, name)
if isinstance(default_val, bool):
val = config.getboolean('settings', name)
elif isinstance(default_val, int):
val = config.getint('settings', name)
- defaults[name] = val
+ parser.set_default(name, val)
else:
print("WARNING: Unknown setting %s" % name)
- parser.set_defaults(**defaults)
def _ReadAliasFile(fname):
"""Read in the U-Boot git alias file if it exists.
diff --git a/tools/patman/terminal.py b/tools/patman/terminal.py
index 60dbce3ce1..c709438bdc 100644
--- a/tools/patman/terminal.py
+++ b/tools/patman/terminal.py
@@ -122,7 +122,7 @@ def TrimAsciiLen(text, size):
return out
-def Print(text='', newline=True, colour=None, limit_to_line=False, bright=True):
+def Print(text='', newline=True, colour=None, limit_to_line=False):
"""Handle a line of output to the terminal.
In test mode this is recorded in a list. Otherwise it is output to the
@@ -140,7 +140,7 @@ def Print(text='', newline=True, colour=None, limit_to_line=False, bright=True):
else:
if colour:
col = Color()
- text = col.Color(colour, text, bright=bright)
+ text = col.Color(colour, text)
if newline:
print(text)
last_print_len = None
diff --git a/tools/patman/test_util.py b/tools/patman/test_util.py
index 4e261755dc..aac58fb72f 100644
--- a/tools/patman/test_util.py
+++ b/tools/patman/test_util.py
@@ -16,14 +16,12 @@ from io import StringIO
use_concurrent = True
try:
- from concurrencytest.concurrencytest import ConcurrentTestSuite
- from concurrencytest.concurrencytest import fork_for_tests
+ from concurrencytest import ConcurrentTestSuite, fork_for_tests
except:
use_concurrent = False
-def RunTestCoverage(prog, filter_fname, exclude_list, build_dir, required=None,
- extra_args=None):
+def RunTestCoverage(prog, filter_fname, exclude_list, build_dir, required=None):
"""Run tests and check that we get 100% coverage
Args:
@@ -36,8 +34,6 @@ def RunTestCoverage(prog, filter_fname, exclude_list, build_dir, required=None,
calculation
build_dir: Build directory, used to locate libfdt.py
required: List of modules which must be in the coverage report
- extra_args (str): Extra arguments to pass to the tool before the -t/test
- arg
Raises:
ValueError if the code coverage is not 100%
@@ -51,14 +47,13 @@ def RunTestCoverage(prog, filter_fname, exclude_list, build_dir, required=None,
glob_list = []
glob_list += exclude_list
glob_list += ['*libfdt.py', '*site-packages*', '*dist-packages*']
- glob_list += ['*concurrencytest*']
- test_cmd = 'test' if 'binman' in prog or 'patman' in prog else '-t'
+ test_cmd = 'test' if 'binman' in prog else '-t'
prefix = ''
if build_dir:
prefix = 'PYTHONPATH=$PYTHONPATH:%s/sandbox_spl/tools ' % build_dir
cmd = ('%spython3-coverage run '
- '--omit "%s" %s %s %s -P1' % (prefix, ','.join(glob_list),
- prog, extra_args or '', test_cmd))
+ '--omit "%s" %s %s -P1' % (prefix, ','.join(glob_list),
+ prog, test_cmd))
os.system(cmd)
stdout = command.Output('python3-coverage', 'report')
lines = stdout.splitlines()
@@ -128,12 +123,12 @@ def ReportResult(toolname:str, test_name: str, result: unittest.TestResult):
for test, err in result.failures:
print(err, result.failures)
if result.skipped:
- print('%d %s test%s SKIPPED:' % (len(result.skipped), toolname,
- 's' if len(result.skipped) > 1 else ''))
+ print('%d binman test%s SKIPPED:' %
+ (len(result.skipped), 's' if len(result.skipped) > 1 else ''))
for skip_info in result.skipped:
print('%s: %s' % (skip_info[0], skip_info[1]))
if result.errors or result.failures:
- print('%s tests FAILED' % toolname)
+ print('binman tests FAILED')
return 1
return 0
diff --git a/tools/patman/tools.py b/tools/patman/tools.py
index d41115a22c..b50370dfe8 100644
--- a/tools/patman/tools.py
+++ b/tools/patman/tools.py
@@ -114,16 +114,14 @@ def SetInputDirs(dirname):
indir = dirname
tout.Debug("Using input directories %s" % indir)
-def GetInputFilename(fname, allow_missing=False):
+def GetInputFilename(fname):
"""Return a filename for use as input.
Args:
fname: Filename to use for new file
- allow_missing: True if the filename can be missing
Returns:
- The full path of the filename, within the input directory, or
- None on error
+ The full path of the filename, within the input directory
"""
if not indir or fname[:1] == '/':
return fname
@@ -132,8 +130,6 @@ def GetInputFilename(fname, allow_missing=False):
if os.path.exists(pathname):
return pathname
- if allow_missing:
- return None
raise ValueError("Filename '%s' not found in input path (%s) (cwd='%s')" %
(fname, ','.join(indir), os.getcwd()))
@@ -274,7 +270,7 @@ def ReadFile(fname, binary=True):
#(fname, len(data), len(data)))
return data
-def WriteFile(fname, data, binary=True):
+def WriteFile(fname, data):
"""Write data into a file.
Args:
@@ -283,7 +279,7 @@ def WriteFile(fname, data, binary=True):
"""
#self._out.Info("Write file '%s' size %d (%#0x)" %
#(fname, len(data), len(data)))
- with open(Filename(fname), binary and 'wb' or 'w') as fd:
+ with open(Filename(fname), 'wb') as fd:
fd.write(data)
def GetBytes(byte, size):
diff --git a/tools/patman/tout.py b/tools/patman/tout.py
index 33305263d8..c7e3272096 100644
--- a/tools/patman/tout.py
+++ b/tools/patman/tout.py
@@ -83,10 +83,7 @@ def _Output(level, msg, color=None):
ClearProgress()
if color:
msg = _color.Color(color, msg)
- if level < NOTICE:
- print(msg, file=sys.stderr)
- else:
- print(msg)
+ print(msg)
def DoOutput(level, msg):
"""Output a message to the terminal.
@@ -171,7 +168,6 @@ def Init(_verbose=WARNING, stdout=sys.stdout):
# TODO(sjg): Move this into Chromite libraries when we have them
stdout_is_tty = hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()
- stderr_is_tty = hasattr(sys.stderr, 'isatty') and sys.stderr.isatty()
def Uninit():
ClearProgress()