summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--api/api_storage.c2
-rw-r--r--arch/arm/cpu/armv7/mx6/clock.c6
-rw-r--r--arch/arm/imx-common/Makefile2
-rw-r--r--arch/arm/imx-common/cpu.c2
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init.c2
-rw-r--r--board/advantech/dms-ba16/dms-ba16.c2
-rw-r--r--board/bachmann/ot1200/ot1200.c2
-rw-r--r--board/boundary/nitrogen6x/nitrogen6x.c2
-rw-r--r--board/congatec/cgtqmx6eval/cgtqmx6eval.c2
-rw-r--r--board/gateworks/gw_ventana/gw_ventana.c2
-rw-r--r--board/kosagi/novena/novena.c2
-rw-r--r--board/toradex/apalis_imx6/apalis_imx6.c2
-rw-r--r--board/toradex/colibri_imx6/colibri_imx6.c2
-rw-r--r--board/udoo/udoo.c2
-rw-r--r--board/wandboard/wandboard.c2
-rw-r--r--cmd/Kconfig1
-rw-r--r--common/Makefile2
-rw-r--r--common/splash_source.c2
-rw-r--r--drivers/block/Kconfig13
-rw-r--r--fs/fat/fat.c2
-rw-r--r--include/config_distro_bootcmd.h6
-rw-r--r--include/config_fallbacks.h2
22 files changed, 38 insertions, 24 deletions
diff --git a/api/api_storage.c b/api/api_storage.c
index 8bed2f3c91..6fc6f44925 100644
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -63,7 +63,7 @@ void dev_stor_init(void)
specs[ENUM_MMC].type = DEV_TYP_STOR | DT_STOR_MMC;
specs[ENUM_MMC].name = "mmc";
#endif
-#if defined(CONFIG_CMD_SATA)
+#if defined(CONFIG_SATA)
specs[ENUM_SATA].max_dev = CONFIG_SYS_SATA_MAX_DEVICE;
specs[ENUM_SATA].enum_started = 0;
specs[ENUM_SATA].enum_ended = 0;
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 84bc2134fe..1f2739e864 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -1042,7 +1042,7 @@ u32 imx_get_fecclk(void)
return mxc_get_clock(MXC_IPG_CLK);
}
-#if defined(CONFIG_CMD_SATA) || defined(CONFIG_PCIE_IMX)
+#if defined(CONFIG_SATA) || defined(CONFIG_PCIE_IMX)
static int enable_enet_pll(uint32_t en)
{
struct mxc_ccm_reg *const imx_ccm
@@ -1069,7 +1069,7 @@ static int enable_enet_pll(uint32_t en)
}
#endif
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
static void ungate_sata_clock(void)
{
struct mxc_ccm_reg *const imx_ccm =
@@ -1143,7 +1143,7 @@ int enable_pcie_clock(void)
clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);
/* Party time! Ungate the clock to the PCIe. */
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
ungate_sata_clock();
#endif
ungate_pcie_clock();
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index b7cb434bd7..fc69172b0b 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_SYSCOUNTER_TIMER) += syscounter.o
endif
ifeq ($(SOC),$(filter $(SOC),mx6 mx7))
obj-y += cache.o init.o
-obj-$(CONFIG_CMD_SATA) += sata.o
+obj-$(CONFIG_SATA) += sata.o
obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
obj-$(CONFIG_IMX_RDC) += rdc-sema.o
obj-$(CONFIG_IMX_BOOTAUX) += imx_bootaux.o
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index 74bdd24ed1..9e83b4221e 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -278,7 +278,7 @@ void arch_preboot_os(void)
#if defined(CONFIG_PCIE_IMX)
imx_pcie_remove();
#endif
-#if defined(CONFIG_CMD_SATA)
+#if defined(CONFIG_SATA)
sata_stop();
#if defined(CONFIG_MX6)
disable_sata_clock();
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index f5bf67c990..388fe2b4ef 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -1024,7 +1024,7 @@ void arch_preboot_os(void)
mtmsr(msr);
}
-#if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
+#if defined(CONFIG_SATA) && defined(CONFIG_FSL_SATA)
int sata_initialize(void)
{
if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
diff --git a/board/advantech/dms-ba16/dms-ba16.c b/board/advantech/dms-ba16/dms-ba16.c
index 91e96ab096..2dab906f44 100644
--- a/board/advantech/dms-ba16/dms-ba16.c
+++ b/board/advantech/dms-ba16/dms-ba16.c
@@ -609,7 +609,7 @@ int board_late_init(void)
pwm_enable(0);
#endif
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
setup_ba16_sata();
#endif
diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c
index c0a8b6423e..74f652e025 100644
--- a/board/bachmann/ot1200/ot1200.c
+++ b/board/bachmann/ot1200/ot1200.c
@@ -338,7 +338,7 @@ int board_init(void)
leds_on();
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
setup_sata();
#endif
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index ab8b2be19b..1145af53d7 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -903,7 +903,7 @@ int board_init(void)
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
setup_sata();
#endif
diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
index 24956a8a94..fe7db91dd8 100644
--- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c
+++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
@@ -702,7 +702,7 @@ int board_init(void)
else
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
setup_sata();
#endif
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 6b950eeb21..40ee1b61e9 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -633,7 +633,7 @@ int board_init(void)
#endif
setup_ventana_i2c();
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
setup_sata();
#endif
/* read Gateworks EEPROM into global struct (used later) */
diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c
index f6972c2d14..17c2b13ef2 100644
--- a/board/kosagi/novena/novena.c
+++ b/board/kosagi/novena/novena.c
@@ -167,7 +167,7 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
setup_sata();
#endif
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
index 7c49ddfc4b..166b93f0c5 100644
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -784,7 +784,7 @@ int board_init(void)
(void) pmic_init();
#endif
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
setup_sata();
#endif
diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c
index 69467ca895..87e24471ce 100644
--- a/board/toradex/colibri_imx6/colibri_imx6.c
+++ b/board/toradex/colibri_imx6/colibri_imx6.c
@@ -657,7 +657,7 @@ int board_init(void)
(void) pmic_init();
#endif
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
setup_sata();
#endif
diff --git a/board/udoo/udoo.c b/board/udoo/udoo.c
index eb7ab657ec..d2cbbaa23e 100644
--- a/board/udoo/udoo.c
+++ b/board/udoo/udoo.c
@@ -244,7 +244,7 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
if (is_cpu_type(MXC_CPU_MX6Q))
setup_sata();
#endif
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index 2c9dc8b7c5..438bc0e743 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -379,7 +379,7 @@ int board_early_init_f(void)
#if defined(CONFIG_VIDEO_IPUV3)
setup_display();
#endif
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
/* Only mx6q wandboard has SATA */
if (is_cpu_type(MXC_CPU_MX6Q))
setup_sata();
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 90d93379c3..c80ac364ea 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -736,6 +736,7 @@ config CMD_FDC
config CMD_SATA
bool "sata - Access SATA subsystem"
+ select SATA
help
SATA (Serial Advanced Technology Attachment) is a serial bus
standard for connecting to hard drives and other storage devices.
diff --git a/common/Makefile b/common/Makefile
index 8540fbc9fa..fdf5c31b1c 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -79,7 +79,7 @@ obj-$(CONFIG_LCD_ROTATION) += lcd_console_rotation.o
obj-$(CONFIG_LCD_DT_SIMPLEFB) += lcd_simplefb.o
obj-$(CONFIG_LYNXKDI) += lynxkdi.o
obj-$(CONFIG_MENU) += menu.o
-obj-$(CONFIG_CMD_SATA) += sata.o
+obj-$(CONFIG_SATA) += sata.o
obj-$(CONFIG_SCSI) += scsi.o
obj-$(CONFIG_UPDATE_TFTP) += update.o
obj-$(CONFIG_DFU_TFTP) += update.o
diff --git a/common/splash_source.c b/common/splash_source.c
index d1647c8300..ee055ddf15 100644
--- a/common/splash_source.c
+++ b/common/splash_source.c
@@ -162,7 +162,7 @@ static inline int splash_init_usb(void)
}
#endif
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
static int splash_init_sata(void)
{
return sata_initialize();
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 4c2aaa0a0b..ed7fa88bf5 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -19,6 +19,19 @@ config AHCI
operations at present. The block device interface has not been converted
to driver model.
+config SATA
+ bool "Support SATA controllers"
+ help
+ This enables support for SATA (Serial Advanced Technology
+ Attachment), a serial bus standard for connecting to hard drives and
+ other storage devices.
+
+ SATA replaces PATA (originally just ATA), which stands for Parallel AT
+ Attachment, where AT refers to an IBM AT (Advanced Technology)
+ computer released in 1984.
+
+ See also CMD_SATA which provides command-line support.
+
config SCSI
bool "Support SCSI controllers"
help
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index a71bad1cbc..9ad18f96ff 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -1251,7 +1251,7 @@ int file_fat_detectfs(void)
}
#if defined(CONFIG_IDE) || \
- defined(CONFIG_CMD_SATA) || \
+ defined(CONFIG_SATA) || \
defined(CONFIG_SCSI) || \
defined(CONFIG_CMD_USB) || \
defined(CONFIG_MMC)
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 4b2c493ae3..d8dab8e46a 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -149,16 +149,16 @@
#define SCAN_DEV_FOR_EFI
#endif
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
#define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata)
#define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_SHARED_SATA
#define BOOTENV_DEV_SATA \
- BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
#define BOOTENV_DEV_NAME_SATA \
- BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_SATA
#endif
#ifdef CONFIG_SCSI
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 2656c75b30..d1411f0550 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -48,7 +48,7 @@
/* Rather than repeat this expression each time, add a define for it */
#if defined(CONFIG_IDE) || \
- defined(CONFIG_CMD_SATA) || \
+ defined(CONFIG_SATA) || \
defined(CONFIG_SCSI) || \
defined(CONFIG_CMD_USB) || \
defined(CONFIG_CMD_PART) || \