summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/Synology/ds109/kwbimage.cfg27
1 files changed, 16 insertions, 11 deletions
diff --git a/board/Synology/ds109/kwbimage.cfg b/board/Synology/ds109/kwbimage.cfg
index 19d77e3a1f..d544af5361 100644
--- a/board/Synology/ds109/kwbimage.cfg
+++ b/board/Synology/ds109/kwbimage.cfg
@@ -19,7 +19,10 @@ BOOT_FROM spi
# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
# Configure RGMII-0/1 interface pad voltage to 1.8V
-DATA 0xFFD100e0 0x1b1b9b9b
+DATA 0xFFD100e0 0x1b1b1b9b
+
+DATA 0xFFD20134 0xbbbbbbbb
+DATA 0xFFD20138 0x00bbbbbb
#Dram initalization for SINGLE x16 CL=5 @ 400MHz
DATA 0xFFD01400 0x43000c30 # DDR Configuration register
@@ -30,7 +33,7 @@ DATA 0xFFD01400 0x43000c30 # DDR Configuration register
# bit29-26: zero
# bit31-30: 01
-DATA 0xFFD01404 0x37543000 # DDR Controller Control Low
+DATA 0xFFD01404 0x39543000 # DDR Controller Control Low
# bit 4: 0=addr/cmd in smame cycle
# bit 5: 0=clk is driven during self refresh, we don't care for APX
# bit 6: 0=use recommended falling edge of clk for addr/cmd
@@ -52,14 +55,14 @@ DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
# bit27-24: TRRD
# bit31-28: TRTP
-DATA 0xFFD0140C 0x00000a33 # DDR Timing (High)
+DATA 0xFFD0140C 0x00000833 # DDR Timing (High)
# bit6-0: TRFC
# bit8-7: TR2R
# bit10-9: TR2W
# bit12-11: TW2W
# bit31-13: zero required
-DATA 0xFFD01410 0x000000cc # DDR Address Control
+DATA 0xFFD01410 0x0000000d # DDR Address Control
# bit1-0: 01, Cs0width=x8
# bit3-2: 10, Cs0size=1Gb
# bit5-4: 01, Cs1width=x8
@@ -92,7 +95,7 @@ DATA 0xFFD0141C 0x00000C52 # DDR Mode
# bit12: 0, PD must be zero
# bit31-13: 0 required
-DATA 0xFFD01420 0x00000040 # DDR Extended Mode
+DATA 0xFFD01420 0x00000042 # DDR Extended Mode
# bit0: 0, DDR DLL enabled
# bit1: 0, DDR drive strenght normal
# bit2: 0, DDR ODT control lsd (disabled)
@@ -104,7 +107,7 @@ DATA 0xFFD01420 0x00000040 # DDR Extended Mode
# bit12: 0, DDR output buffer enabled
# bit31-13: 0 required
-DATA 0xFFD01424 0x0000F17F # DDR Controller Control High
+DATA 0xFFD01424 0x0000F1FF # DDR Controller Control High
# bit2-0: 111, required
# bit3 : 1 , MBUS Burst Chop disabled
# bit6-4: 111, required
@@ -120,26 +123,28 @@ DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values)
DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values)
DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
-DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size
+DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
# bit0: 1, Window enabled
# bit1: 0, Write Protect disabled
# bit3-2: 00, CS0 hit selected
# bit23-4: ones, required
-# bit31-24: 0x0F, Size (i.e. 256MB)
+# bit31-24: 0x07, Size (i.e. 128MB)
DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb
-DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1
+DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
+DATA 0xFFD01510 0x20000000 # CS[2]n Base address to 256Mb
DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xFFD01518 0x30000000 # CS[3]n Base address to 256Mb
DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
-DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low)
+DATA 0xFFD01494 0x003C0000 # DDR ODT Control (Low)
DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
# bit3-2: 01, ODT1 active NEVER!
# bit31-4: zero, required
-DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
+DATA 0xFFD0149C 0x0000F80F # CPU ODT Control
DATA 0xFFD01480 0x00000001 # DDR Initialization Control
#bit0=1, enable DDR init upon this register write