diff options
92 files changed, 3153 insertions, 492 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 6d1e8668e7..bb979550c4 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -620,12 +620,14 @@ dtb-y += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-mba6a.dtb \ + imx6dl-mba6b.dtb \ imx6dl-mamoj.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-pico.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabresd.dtb \ - imx6dl-wandboard-revb1.dtb \ + imx6dl-wandboard-revd1.dtb \ endif @@ -649,6 +651,8 @@ dtb-y += \ imx6q-icore-rqs.dtb \ imx6q-kp.dtb \ imx6q-logicpd.dtb \ + imx6q-mba6a.dtb \ + imx6q-mba6b.dtb \ imx6q-mccmon6.dtb\ imx6q-nitrogen6x.dtb \ imx6q-novena.dtb \ @@ -657,7 +661,7 @@ dtb-y += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-tbs2910.dtb \ - imx6q-wandboard-revb1.dtb \ + imx6q-wandboard-revd1.dtb \ imx6qp-sabreauto.dtb \ imx6qp-sabresd.dtb \ imx6qp-wandboard-revd1.dtb \ @@ -728,7 +732,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mq-evk.dtb \ imx8mp-evk.dtb -dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb +dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ + imxrt1020-evk.dtb dtb-$(CONFIG_RCAR_GEN2) += \ r8a7790-lager-u-boot.dtb \ diff --git a/arch/arm/dts/imx53-kp-u-boot.dtsi b/arch/arm/dts/imx53-kp-u-boot.dtsi index acab9b3657..a112db9d1a 100644 --- a/arch/arm/dts/imx53-kp-u-boot.dtsi +++ b/arch/arm/dts/imx53-kp-u-boot.dtsi @@ -5,6 +5,13 @@ * SPDX-License-Identifier: GPL-2.0+ or X11 */ +&fec { + fixed-link { /* RMII fixed link for both HSC|DDC */ + speed = <100>; + full-duplex; + }; +}; + &pmic { u-boot,i2c-transaction-bytes = <3>; }; diff --git a/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi new file mode 100644 index 0000000000..fc7dffea2a --- /dev/null +++ b/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2020 Harald Seiler <hws@denx.de> + */ + +#include "imx6qdl-dhcom-pdk2-u-boot.dtsi" diff --git a/arch/arm/dts/imx6dl-mba6.dtsi b/arch/arm/dts/imx6dl-mba6.dtsi new file mode 100644 index 0000000000..d74adf2b28 --- /dev/null +++ b/arch/arm/dts/imx6dl-mba6.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +ðphy { + rxdv-skew-ps = <180>; + txen-skew-ps = <0>; + rxd3-skew-ps = <180>; + rxd2-skew-ps = <180>; + rxd1-skew-ps = <180>; + rxd0-skew-ps = <180>; + txd3-skew-ps = <120>; + txd2-skew-ps = <0>; + txd1-skew-ps = <300>; + txd0-skew-ps = <120>; + txc-skew-ps = <1860>; + rxc-skew-ps = <1860>; +}; diff --git a/arch/arm/dts/imx6dl-mba6a.dts b/arch/arm/dts/imx6dl-mba6a.dts new file mode 100644 index 0000000000..fc9cc2c056 --- /dev/null +++ b/arch/arm/dts/imx6dl-mba6a.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6dl-tqma6a.dtsi" +#include "imx6qdl-mba6.dtsi" +#include "imx6qdl-mba6a.dtsi" +#include "imx6dl-mba6.dtsi" + +/ { + model = "TQ TQMa6S on MBa6x"; + compatible = "tq,mba6a", "tq,tqma6dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/dts/imx6dl-mba6b.dts b/arch/arm/dts/imx6dl-mba6b.dts new file mode 100644 index 0000000000..a3c8d9d4c6 --- /dev/null +++ b/arch/arm/dts/imx6dl-mba6b.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6dl-tqma6b.dtsi" +#include "imx6qdl-mba6.dtsi" +#include "imx6qdl-mba6b.dtsi" +#include "imx6dl-mba6.dtsi" + +/ { + model = "TQ TQMa6S on MBa6x"; + compatible = "tq,mba6b", "tq,tqma6dl", "fsl,imx6dl"; +}; diff --git a/arch/arm/dts/imx6dl-tqma6a.dtsi b/arch/arm/dts/imx6dl-tqma6a.dtsi new file mode 100644 index 0000000000..df87b381ca --- /dev/null +++ b/arch/arm/dts/imx6dl-tqma6a.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +#include "imx6dl.dtsi" +#include "imx6qdl-tqma6a.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory { + reg = <0x10000000 0x20000000>; + }; +}; + diff --git a/arch/arm/dts/imx6dl-tqma6b.dtsi b/arch/arm/dts/imx6dl-tqma6b.dtsi new file mode 100644 index 0000000000..47ffbc4d95 --- /dev/null +++ b/arch/arm/dts/imx6dl-tqma6b.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +#include "imx6dl.dtsi" +#include "imx6qdl-tqma6b.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory { + reg = <0x10000000 0x20000000>; + }; +}; + diff --git a/arch/arm/dts/imx6dl-wandboard-revb1.dts b/arch/arm/dts/imx6dl-wandboard-revd1.dts index c2946fbaa0..6d1d863c2e 100644 --- a/arch/arm/dts/imx6dl-wandboard-revb1.dts +++ b/arch/arm/dts/imx6dl-wandboard-revd1.dts @@ -6,10 +6,10 @@ */ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-wandboard-revb1.dtsi" +#include "imx6qdl-wandboard-revd1.dtsi" / { - model = "Wandboard i.MX6 Dual Lite Board rev B1"; + model = "Wandboard i.MX6 Dual Lite Board revD1"; compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; memory@10000000 { diff --git a/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi index b94231edb3..026342df5a 100644 --- a/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi +++ b/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi @@ -3,6 +3,8 @@ * Copyright (C) 2019 Claudius Heine <ch@denx.de> */ +#include "imx6qdl-dhcom-pdk2-u-boot.dtsi" + / { wdt-reboot { compatible = "wdt-reboot"; diff --git a/arch/arm/dts/imx6q-mba6.dtsi b/arch/arm/dts/imx6q-mba6.dtsi new file mode 100644 index 0000000000..76e8410f8e --- /dev/null +++ b/arch/arm/dts/imx6q-mba6.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +ðphy { + rxdv-skew-ps = <180>; + txen-skew-ps = <120>; + rxd3-skew-ps = <180>; + rxd2-skew-ps = <180>; + rxd1-skew-ps = <180>; + rxd0-skew-ps = <180>; + txd3-skew-ps = <120>; + txd2-skew-ps = <0>; + txd1-skew-ps = <180>; + txd0-skew-ps = <360>; + txc-skew-ps = <1860>; + rxc-skew-ps = <1860>; +}; diff --git a/arch/arm/dts/imx6q-mba6a.dts b/arch/arm/dts/imx6q-mba6a.dts new file mode 100644 index 0000000000..7983ad94f8 --- /dev/null +++ b/arch/arm/dts/imx6q-mba6a.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6q-tqma6a.dtsi" +#include "imx6qdl-mba6.dtsi" +#include "imx6qdl-mba6a.dtsi" +#include "imx6q-mba6.dtsi" + +/ { + model = "TQ TQMa6Q on MBa6x"; + compatible = "tq,mba6a", "fsl,imx6q"; +}; diff --git a/arch/arm/dts/imx6q-mba6b.dts b/arch/arm/dts/imx6q-mba6b.dts new file mode 100644 index 0000000000..9d117dd190 --- /dev/null +++ b/arch/arm/dts/imx6q-mba6b.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "imx6q-tqma6b.dtsi" +#include "imx6qdl-mba6.dtsi" +#include "imx6qdl-mba6b.dtsi" +#include "imx6q-mba6.dtsi" + +/ { + model = "TQ TQMa6Q on MBa6x"; + compatible = "tq,mba6b", "fsl,imx6q"; +}; diff --git a/arch/arm/dts/imx6q-tqma6a.dtsi b/arch/arm/dts/imx6q-tqma6a.dtsi new file mode 100644 index 0000000000..b252077f49 --- /dev/null +++ b/arch/arm/dts/imx6q-tqma6a.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +#include "imx6q.dtsi" +#include "imx6qdl-tqma6a.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory { + reg = <0x10000000 0x40000000>; + }; +}; + diff --git a/arch/arm/dts/imx6q-tqma6b.dtsi b/arch/arm/dts/imx6q-tqma6b.dtsi new file mode 100644 index 0000000000..107a9eb037 --- /dev/null +++ b/arch/arm/dts/imx6q-tqma6b.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +#include "imx6q.dtsi" +#include "imx6qdl-tqma6b.dtsi" +#include "imx6qdl-tqma6.dtsi" + +/ { + memory { + reg = <0x10000000 0x40000000>; + }; +}; + diff --git a/arch/arm/dts/imx6q-wandboard-revb1.dts b/arch/arm/dts/imx6q-wandboard-revd1.dts index f6ccbecff9..55331021d8 100644 --- a/arch/arm/dts/imx6q-wandboard-revb1.dts +++ b/arch/arm/dts/imx6q-wandboard-revd1.dts @@ -6,10 +6,10 @@ */ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-wandboard-revb1.dtsi" +#include "imx6qdl-wandboard-revd1.dtsi" / { - model = "Wandboard i.MX6 Quad Board rev B1"; + model = "Wandboard i.MX6 Quad Board revD1"; compatible = "wand,imx6q-wandboard", "fsl,imx6q"; memory@10000000 { diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi new file mode 100644 index 0000000000..32128d4d2a --- /dev/null +++ b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2020 Harald Seiler <hws@denx.de> + */ + +#include "imx6qdl-dhcom-u-boot.dtsi" + +/ { + fec_vio: regulator-fec { + compatible = "regulator-fixed"; + + regulator-name = "fec-vio"; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; +}; + +&fec { + phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-reset-post-delay = <10>; + + phy-supply = <&fec_vio>; +}; diff --git a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi new file mode 100644 index 0000000000..4c3b5e82d6 --- /dev/null +++ b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2020 Harald Seiler <hws@denx.de> + */ + +®_usb_otg_vbus { + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; +}; diff --git a/arch/arm/dts/imx6qdl-mba6.dtsi b/arch/arm/dts/imx6qdl-mba6.dtsi new file mode 100644 index 0000000000..874b68564a --- /dev/null +++ b/arch/arm/dts/imx6qdl-mba6.dtsi @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +/ { + aliases { + mmc1 = &usdhc2; + }; + + chosen { + linux,stdout-path = &uart2; + stdout-path = &uart2; + }; + + regulators { + reg_mba6_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6-3p3v"; + reg = <1>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_otgvbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_otgpwr>; + regulator-name = "otg-vbus-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin_supply = <®_3p3v>; + }; + }; +}; + +&fec { + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-reset-post-delay = <100>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <3>; + force-master; + max-speed = <1000>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + mba6 { + pinctrl_enet: enetgrp { + fsl,pins = < + /* FEC phy IRQ */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x00011008 + /* FEC phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b099 + /* DSE = 100, 100k up, SPEED = MED */ + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0xb0a0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0xb0a0 + /* DSE = 111, pull 100k up */ + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0xb038 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0xb038 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0xb038 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0xb038 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0xb038 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038 + /* DSE = 111, pull external */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x0038 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x0038 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x0038 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x0038 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x0038 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038 + /* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0f0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b099 /* LCD.PWR_EN */ + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0001b099 /* LCD.RESET */ + /* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099 + + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099 + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099 + + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099 + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099 + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099 + + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099 + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099 + + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099 + + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099 + + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099 + >; + }; + + pinctrl_reg_otgpwr: regotgpwrgrp { + fsl,pins = < + /* OTG_PWR */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0001b099 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + /* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */ + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00017071 + /* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */ + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059 + + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b099 /* usdhc2 CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0001b099 /* usdhc2 WP */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0001b0b0 + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x00017059 + >; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + vbus-supply = <®_otgvbus>; + status = "okay"; +}; + +&usdhc2 { /* Baseboard Slot */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_mba6_3p3v>; + bus-width = <4>; + no-1-8-v; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6qdl-mba6a.dtsi b/arch/arm/dts/imx6qdl-mba6a.dtsi new file mode 100644 index 0000000000..d8b4d00d85 --- /dev/null +++ b/arch/arm/dts/imx6qdl-mba6a.dtsi @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c1 { + sensor1: lm75@49 { + compatible = "lm75"; + reg = <0x49>; + }; + + eeprom1: m24c64@57 { + compatible = "st,24c64", "at24"; + reg = <0x57>; + pagesize = <32>; + }; + + rtc1: ds1339@68 { + compatible = "ds1339"; + reg = <0x68>; + }; +}; + +&iomuxc { + mba6 { + pinctrl_enet_fix: enetfixgrp { + fsl,pins = < + /* ENET ping patch */ + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + }; +}; diff --git a/arch/arm/dts/imx6qdl-mba6b.dtsi b/arch/arm/dts/imx6qdl-mba6b.dtsi new file mode 100644 index 0000000000..7489b48d82 --- /dev/null +++ b/arch/arm/dts/imx6qdl-mba6b.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c3 { + sensor1: lm75@49 { + compatible = "lm75"; + reg = <0x49>; + }; + + eeprom1: m24c64@57 { + compatible = "st,24c64", "at24"; + reg = <0x57>; + pagesize = <32>; + }; + + rtc1: ds1339@68 { + compatible = "ds1339"; + reg = <0x68>; + }; +}; + +&iomuxc { + mba6 { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899 + >; + }; + }; + +}; diff --git a/arch/arm/dts/imx6qdl-tqma6.dtsi b/arch/arm/dts/imx6qdl-tqma6.dtsi new file mode 100644 index 0000000000..85eb3d8da1 --- /dev/null +++ b/arch/arm/dts/imx6qdl-tqma6.dtsi @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +/ { + aliases { + mmc0 = &usdhc3; + /delete-property/ mmc1; + /delete-property/ mmc2; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "supply-3p3v"; + reg = <0>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 0>; + status = "okay"; + + flash: m25p80@0 { + status = "okay"; + compatible = "micron,n25q128a13", "n25q128a13"; + spi-max-frequency = <50000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + m25p,fast-read; + }; +}; + +&iomuxc { + tqma6 { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */ + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099 + /* eCSPI1 SS1 */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099 + >; + }; + + pinctrl_i2c1_tqma6: i2c1-tqma6grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899 + >; + }; + + pinctrl_i2c3_tqma6: i2c3-tqma6grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + }; +}; + +&pmic { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio6>; + interrupts = <10 8>; + + regulators { + reg_vddcore: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_vddsoc: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_gen_3v3: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_ddr_1v5a: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_1v5b: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5v_600mA: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-always-on; + }; + + reg_snvs_3v: vsnvs { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1_1v5: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + /* not used */ + }; + + reg_vgen2_1v2_eth: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + reg_vgen3_2v8: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen4_1v8: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5_1v8_eth: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6_3v3: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vmmc-supply = <®_3p3v>; + non-removable; + disable-wp; + bus-width = <8>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/dts/imx6qdl-tqma6a.dtsi b/arch/arm/dts/imx6qdl-tqma6a.dtsi new file mode 100644 index 0000000000..f94a5d80c2 --- /dev/null +++ b/arch/arm/dts/imx6qdl-tqma6a.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_tqma6>; + clock-frequency = <100000>; + status = "okay"; + + pmic: pf0100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + }; + + sensor0: lm75@48 { + compatible = "lm75"; + reg = <0x48>; + }; + + eeprom0: m24c64@50 { + compatible = "st,24c64", "at24"; + reg = <0x50>; + pagesize = <32>; + }; +}; + diff --git a/arch/arm/dts/imx6qdl-tqma6b.dtsi b/arch/arm/dts/imx6qdl-tqma6b.dtsi new file mode 100644 index 0000000000..682f553701 --- /dev/null +++ b/arch/arm/dts/imx6qdl-tqma6b.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2020 TQ-Systems GmbH + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_tqma6>; + clock-frequency = <100000>; + status = "okay"; + + pmic: pf0100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + }; + + sensor0: lm75@48 { + compatible = "lm75"; + reg = <0x48>; + }; + + eeprom0: m24c64@50 { + compatible = "st,24c64", "at24"; + reg = <0x50>; + pagesize = <32>; + }; +}; + diff --git a/arch/arm/dts/imxrt1020-evk-u-boot.dtsi b/arch/arm/dts/imxrt1020-evk-u-boot.dtsi new file mode 100644 index 0000000000..d32c98de9c --- /dev/null +++ b/arch/arm/dts/imxrt1020-evk-u-boot.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +/ { + chosen { + u-boot,dm-spl; + }; +}; + +&lpuart1 { /* console */ + u-boot,dm-spl; +}; + +&semc { + bank1: bank@0 { + u-boot,dm-spl; + }; +}; + +&iomuxc { + u-boot,dm-spl; + + imxrt1020-evk { + u-boot,dm-spl; + pinctrl_lpuart1: lpuart1grp { + u-boot,dm-spl; + }; + + pinctrl_semc: semcgrp { + u-boot,dm-spl; + }; + + pinctrl_usdhc0: usdhc0grp { + u-boot,dm-spl; + }; + }; +}; + +&usdhc1 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imxrt1020-evk.dts b/arch/arm/dts/imxrt1020-evk.dts new file mode 100644 index 0000000000..ece13601bd --- /dev/null +++ b/arch/arm/dts/imxrt1020-evk.dts @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +/dts-v1/; +#include "imxrt1020.dtsi" +#include "imxrt1020-evk-u-boot.dtsi" +#include <dt-bindings/pinctrl/pins-imxrt1020.h> + +/ { + model = "NXP IMXRT1020-evk board"; + compatible = "fsl,imxrt1020-evk", "fsl,imxrt1020"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x80000000 0x2000000>; + }; +}; + +&lpuart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&semc { + /* + * Memory configuration from sdram datasheet IS42S16160J-6TLI + */ + fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8 + MUX_CSX0_SDRAM_CS1 + 0 + 0 + 0 + 0>; + fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS + BL_8 + COL_9BITS + CL_3>; + fsl,sdram-timing = /bits/ 8 <0x2 + 0x2 + 0x9 + 0x1 + 0x5 + 0x6 + + 0x20 + 0x09 + 0x01 + 0x00 + + 0x04 + 0x0A + 0x21 + 0x50>; + + bank1: bank@0 { + fsl,base-address = <0x80000000>; + fsl,memory-size = <MEM_SIZE_32M>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + + imxrt1020-evk { + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MXRT1020_IOMUXC_GPIO_AD_B0_06_LPUART1_TX + 0xf1 + MXRT1020_IOMUXC_GPIO_AD_B0_07_LPUART1_RX + 0xf1 + >; + }; + + pinctrl_semc: semcgrp { + fsl,pins = < + MXRT1020_IOMUXC_GPIO_EMC_00_SEMC_DA00 + 0xf1 /* SEMC_D0 */ + MXRT1020_IOMUXC_GPIO_EMC_01_SEMC_DA01 + 0xf1 /* SEMC_D1 */ + MXRT1020_IOMUXC_GPIO_EMC_02_SEMC_DA02 + 0xf1 /* SEMC_D2 */ + MXRT1020_IOMUXC_GPIO_EMC_03_SEMC_DA03 + 0xf1 /* SEMC_D3 */ + MXRT1020_IOMUXC_GPIO_EMC_04_SEMC_DA04 + 0xf1 /* SEMC_D4 */ + MXRT1020_IOMUXC_GPIO_EMC_05_SEMC_DA05 + 0xf1 /* SEMC_D5 */ + MXRT1020_IOMUXC_GPIO_EMC_06_SEMC_DA06 + 0xf1 /* SEMC_D6 */ + MXRT1020_IOMUXC_GPIO_EMC_07_SEMC_DA07 + 0xf1 /* SEMC_D7 */ + MXRT1020_IOMUXC_GPIO_EMC_08_SEMC_DM00 + 0xf1 /* SEMC_DM0 */ + MXRT1020_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 + 0xf1 /* SEMC_A0 */ + MXRT1020_IOMUXC_GPIO_EMC_10_SEMC_CAS + 0xf1 /* SEMC_CAS */ + MXRT1020_IOMUXC_GPIO_EMC_11_SEMC_RAS + 0xf1 /* SEMC_RAS */ + MXRT1020_IOMUXC_GPIO_EMC_12_SEMC_CS0 + 0xf1 /* SEMC_CS0 */ + MXRT1020_IOMUXC_GPIO_EMC_13_SEMC_BA0 + 0xf1 /* SEMC_BA0 */ + MXRT1020_IOMUXC_GPIO_EMC_14_SEMC_BA1 + 0xf1 /* SEMC_BA1 */ + MXRT1020_IOMUXC_GPIO_EMC_15_SEMC_ADDR10 + 0xf1 /* SEMC_A10 */ + MXRT1020_IOMUXC_GPIO_EMC_16_SEMC_ADDR00 + 0xf1 /* SEMC_A0 */ + MXRT1020_IOMUXC_GPIO_EMC_17_SEMC_ADDR01 + 0xf1 /* SEMC_A1 */ + MXRT1020_IOMUXC_GPIO_EMC_18_SEMC_ADDR02 + 0xf1 /* SEMC_A2 */ + MXRT1020_IOMUXC_GPIO_EMC_19_SEMC_ADDR03 + 0xf1 /* SEMC_A3 */ + MXRT1020_IOMUXC_GPIO_EMC_20_SEMC_ADDR04 + 0xf1 /* SEMC_A4 */ + MXRT1020_IOMUXC_GPIO_EMC_21_SEMC_ADDR05 + 0xf1 /* SEMC_A5 */ + MXRT1020_IOMUXC_GPIO_EMC_22_SEMC_ADDR06 + 0xf1 /* SEMC_A6 */ + MXRT1020_IOMUXC_GPIO_EMC_23_SEMC_ADDR07 + 0xf1 /* SEMC_A7 */ + MXRT1020_IOMUXC_GPIO_EMC_24_SEMC_ADDR08 + 0xf1 /* SEMC_A8 */ + MXRT1020_IOMUXC_GPIO_EMC_25_SEMC_ADDR09 + 0xf1 /* SEMC_A9 */ + MXRT1020_IOMUXC_GPIO_EMC_26_SEMC_ADDR11 + 0xf1 /* SEMC_A11 */ + MXRT1020_IOMUXC_GPIO_EMC_27_SEMC_ADDR12 + 0xf1 /* SEMC_A12 */ + MXRT1020_IOMUXC_GPIO_EMC_28_SEMC_DQS + (IMX_PAD_SION | 0xf1) /* SEMC_DQS */ + MXRT1020_IOMUXC_GPIO_EMC_29_SEMC_CKE + 0xf1 /* SEMC_CKE */ + MXRT1020_IOMUXC_GPIO_EMC_30_SEMC_CLK + 0xf1 /* SEMC_CLK */ + MXRT1020_IOMUXC_GPIO_EMC_31_SEMC_DM01 + 0xf1 /* SEMC_DM01 */ + MXRT1020_IOMUXC_GPIO_EMC_32_SEMC_DATA08 + 0xf1 /* SEMC_D8 */ + MXRT1020_IOMUXC_GPIO_EMC_33_SEMC_DATA09 + 0xf1 /* SEMC_D9 */ + MXRT1020_IOMUXC_GPIO_EMC_34_SEMC_DATA10 + 0xf1 /* SEMC_D10 */ + MXRT1020_IOMUXC_GPIO_EMC_35_SEMC_DATA11 + 0xf1 /* SEMC_D11 */ + MXRT1020_IOMUXC_GPIO_EMC_36_SEMC_DATA12 + 0xf1 /* SEMC_D12 */ + MXRT1020_IOMUXC_GPIO_EMC_37_SEMC_DATA13 + 0xf1 /* SEMC_D13 */ + MXRT1020_IOMUXC_GPIO_EMC_38_SEMC_DATA14 + 0xf1 /* SEMC_D14 */ + MXRT1020_IOMUXC_GPIO_EMC_39_SEMC_DATA15 + 0xf1 /* SEMC_D15 */ + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1020_IOMUXC_GPIO_SD_B0_06_USDHC1_CD_B + 0x1B000 + MXRT1020_IOMUXC_GPIO_SD_B0_02_USDHC1_CMD + 0x17061 + MXRT1020_IOMUXC_GPIO_SD_B0_03_USDHC1_CLK + 0x17061 + MXRT1020_IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3 + 0x17061 + MXRT1020_IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2 + 0x17061 + MXRT1020_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1 + 0x17061 + MXRT1020_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0 + 0x17061 + >; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0>; + pinctrl-2 = <&pinctrl_usdhc0>; + pinctrl-3 = <&pinctrl_usdhc0>; + status = "okay"; + + cd-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/dts/imxrt1020.dtsi b/arch/arm/dts/imxrt1020.dtsi new file mode 100644 index 0000000000..97f3cec9f3 --- /dev/null +++ b/arch/arm/dts/imxrt1020.dtsi @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2020 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include "armv7-m.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/imxrt1020-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/memory/imxrt-sdram.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + mmc0 = &usdhc1; + serial0 = &lpuart1; + }; + + clocks { + u-boot,dm-spl; + ckil { + compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + ckih1 { + compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + osc { + u-boot,dm-spl; + compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; + + soc { + u-boot,dm-spl; + + semc: semc@402f0000 { + u-boot,dm-spl; + compatible = "fsl,imxrt-semc"; + reg = <0x402f0000 0x4000>; + clocks = <&clks IMXRT1020_CLK_SEMC>; + pinctrl-0 = <&pinctrl_semc>; + pinctrl-names = "default"; + status = "okay"; + }; + + lpuart1: serial@40184000 { + compatible = "fsl,imxrt-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMXRT1020_CLK_LPUART1>; + clock-names = "per"; + status = "disabled"; + }; + + iomuxc: iomuxc@401f8000 { + compatible = "fsl,imxrt-iomuxc"; + reg = <0x401f8000 0x4000>; + fsl,mux_mask = <0x7>; + }; + + clks: ccm@400fc000 { + u-boot,dm-spl; + compatible = "fsl,imxrt1020-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + }; + + usdhc1: usdhc@402c0000 { + u-boot,dm-spl; + compatible = "fsl,imxrt-usdhc"; + reg = <0x402c0000 0x10000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMXRT1020_CLK_USDHC1>; + clock-names = "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + gpio1: gpio@401b8000 { + u-boot,dm-spl; + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + reg = <0x401b8000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@401bc000 { + u-boot,dm-spl; + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + reg = <0x401bc000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@401c0000 { + u-boot,dm-spl; + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio"; + reg = <0x401c0000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/dts/imxrt1050-evk.dts b/arch/arm/dts/imxrt1050-evk.dts index 56b75986e2..b5e781275e 100644 --- a/arch/arm/dts/imxrt1050-evk.dts +++ b/arch/arm/dts/imxrt1050-evk.dts @@ -185,6 +185,33 @@ 0x17061 >; }; + + pinctrl_lcdif: lcdifgrp { + u-boot,dm-spl; + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069 + MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069 + >; + }; }; }; @@ -198,3 +225,36 @@ cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + display = <&display0>; + status = "okay"; + + assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + timing0: timing0 { + clock-frequency = <9300000>; + hactive = <480>; + vactive = <272>; + hback-porch = <4>; + hfront-porch = <8>; + vback-porch = <4>; + vfront-porch = <8>; + hsync-len = <41>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <0>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; +}; diff --git a/arch/arm/dts/imxrt1050.dtsi b/arch/arm/dts/imxrt1050.dtsi index b1d98e6feb..7cfe5f5c95 100644 --- a/arch/arm/dts/imxrt1050.dtsi +++ b/arch/arm/dts/imxrt1050.dtsi @@ -4,7 +4,6 @@ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/imxrt1050-clock.h> @@ -12,7 +11,11 @@ #include <dt-bindings/memory/imxrt-sdram.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { + display0 = &lcdif; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -142,5 +145,14 @@ interrupt-controller; #interrupt-cells = <2>; }; + + lcdif: lcdif@402b8000 { + compatible = "fsl,imxrt-lcdif"; + reg = <0x402b8000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMXRT1050_CLK_LCDIF>; + clock-names = "per"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/include/asm/arch-imxrt/imx-regs.h b/arch/arm/include/asm/arch-imxrt/imx-regs.h index 4f1d439f6f..44c95dcd11 100644 --- a/arch/arm/include/asm/arch-imxrt/imx-regs.h +++ b/arch/arm/include/asm/arch-imxrt/imx-regs.h @@ -17,4 +17,10 @@ #define ANATOP_BASE_ADDR 0x400d8000 +#define MXS_LCDIF_BASE 0x402b8000 + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/mach-imx/regs-lcdif.h> +#endif + #endif /* __ASM_ARCH_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h index e0fadb9b1c..dbc97b25df 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -306,6 +306,25 @@ struct mx6dq_iomux_grp_regs { u32 grp_b6ds; }; +/* + * NoC scheduler registers - only on IMX6DQP + */ +#define MX6DQP_NOC_SCHED_BASE 0x00bb0000 +struct mx6dqp_noc_sched_regs { + u32 coreid; + u32 revid; + u32 ddrconf; + u32 ddrtiming; + u32 ddrmode; + u32 rlat; + u32 res1[4]; + u32 ipu1; + u32 ipu2; + u32 res2[2]; + u32 activate; + u32 res3[16]; +}; + #define MX6SDL_IOM_DDR_BASE 0x020e0400 struct mx6sdl_iomux_ddr_regs { u32 res1[25]; diff --git a/arch/arm/include/asm/mach-imx/regs-lcdif.h b/arch/arm/include/asm/mach-imx/regs-lcdif.h index b4c430a35c..5874638796 100644 --- a/arch/arm/include/asm/mach-imx/regs-lcdif.h +++ b/arch/arm/include/asm/mach-imx/regs-lcdif.h @@ -22,7 +22,7 @@ struct mxs_lcdif_regs { defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ - defined(CONFIG_IMX8M) + defined(CONFIG_IMX8M) || defined(CONFIG_IMXRT) mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */ #endif mxs_reg_32(hw_lcdif_transfer_count) /* 0x20/0x30 */ @@ -49,7 +49,7 @@ struct mxs_lcdif_regs { mxs_reg_32(hw_lcdif_csc_coeffctrl2) /* 0x130 */ mxs_reg_32(hw_lcdif_csc_coeffctrl3) /* 0x140 */ mxs_reg_32(hw_lcdif_csc_coeffctrl4) /* 0x150 */ - mxs_reg_32(hw_lcdif_csc_offset) /* 0x160 */ + mxs_reg_32(hw_lcdif_csc_offset) /* 0x160 */ mxs_reg_32(hw_lcdif_csc_limit) /* 0x170 */ #if defined(CONFIG_MX23) @@ -61,7 +61,7 @@ struct mxs_lcdif_regs { defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) || \ defined(CONFIG_MX7) || defined(CONFIG_MX7ULP) || \ - defined(CONFIG_IMX8M) + defined(CONFIG_IMX8M) || defined(CONFIG_IMXRT) mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ #endif mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1d0/0x1b0 */ diff --git a/arch/arm/mach-imx/imxrt/Kconfig b/arch/arm/mach-imx/imxrt/Kconfig index e3aff11d48..d275fdf72e 100644 --- a/arch/arm/mach-imx/imxrt/Kconfig +++ b/arch/arm/mach-imx/imxrt/Kconfig @@ -3,6 +3,10 @@ if ARCH_IMXRT config IMXRT bool +config IMXRT1020 + bool + select IMXRT + config IMXRT1050 bool select IMXRT @@ -14,12 +18,17 @@ choice prompt "NXP i.MXRT board select" optional +config TARGET_IMXRT1020_EVK + bool "Support imxrt1020 EVK board" + select IMXRT1020 + config TARGET_IMXRT1050_EVK bool "Support imxrt1050 EVK board" select IMXRT1050 endchoice +source "board/freescale/imxrt1020-evk/Kconfig" source "board/freescale/imxrt1050-evk/Kconfig" endif diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index f9f576d403..fa6e1112e6 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -590,7 +590,18 @@ config TARGET_KP_IMX6Q_TPC config TARGET_TQMA6 bool "TQ Systems TQMa6 board" + select BOARD_EARLY_INIT_F select BOARD_LATE_INIT + select MXC_SPI + select SPI + imply DM + imply DM_GPIO + imply DM_MMC + imply DM_SPI + imply DM_SPI_FLASH + imply DM_I2C + imply CMD_SF + imply CMD_DM config TARGET_UDOO bool "udoo" diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c index 4396880b74..69fe756b0b 100644 --- a/arch/arm/mach-imx/mx6/ddr.c +++ b/arch/arm/mach-imx/mx6/ddr.c @@ -945,6 +945,27 @@ void mx6sdl_dram_iocfg(unsigned width, mmdc1->entry = value; \ } while (0) +/* see BOOT_CFG3 description Table 5-4. EIM Boot Fusemap */ +#define BOOT_CFG3_DDR_MASK 0x30 +#define BOOT_CFG3_EXT_DDR_MASK 0x33 + +#define DDR_MMAP_NOC_SINGLE 0 +#define DDR_MMAP_NOC_DUAL 0x31 + +/* NoC ACTIVATE shifts */ +#define NOC_RD_SHIFT 0 +#define NOC_FAW_PERIOD_SHIFT 4 +#define NOC_FAW_BANKS_SHIFT 10 + +/* NoC DdrTiming shifts */ +#define NOC_ACT_TO_ACT_SHIFT 0 +#define NOC_RD_TO_MISS_SHIFT 6 +#define NOC_WR_TO_MISS_SHIFT 12 +#define NOC_BURST_LEN_SHIFT 18 +#define NOC_RD_TO_WR_SHIFT 21 +#define NOC_WR_TO_RD_SHIFT 26 +#define NOC_BW_RATIO_SHIFT 31 + /* * According JESD209-2B-LPDDR2: Table 103 * WL: write latency @@ -1234,6 +1255,8 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, { volatile struct mmdc_p_regs *mmdc0; volatile struct mmdc_p_regs *mmdc1; + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + u8 soc_boot_cfg3 = (readl(&src_regs->sbmr1) >> 16) & 0xff; u32 val; u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd; u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl; @@ -1526,6 +1549,79 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, /* Step 12: Configure and activate periodic refresh */ mmdc0->mdref = (sysinfo->refsel << 14) | (sysinfo->refr << 11); + /* + * Step 13: i.MX6DQP only: If the NoC scheduler is enabled, + * configure it and disable MMDC arbitration/reordering (see EB828) + */ + if (is_mx6dqp() && + ((soc_boot_cfg3 & BOOT_CFG3_DDR_MASK) == DDR_MMAP_NOC_SINGLE || + (soc_boot_cfg3 & BOOT_CFG3_EXT_DDR_MASK) == DDR_MMAP_NOC_DUAL)) { + struct mx6dqp_noc_sched_regs *noc_sched = + (struct mx6dqp_noc_sched_regs *)MX6DQP_NOC_SCHED_BASE; + + /* + * These values are fixed based on integration parameters and + * should not be modified + */ + noc_sched->rlat = 0x00000040; + noc_sched->ipu1 = 0x00000020; + noc_sched->ipu2 = 0x00000020; + + noc_sched->activate = (1 << NOC_FAW_BANKS_SHIFT) | + (tfaw << NOC_FAW_PERIOD_SHIFT) | + (trrd << NOC_RD_SHIFT); + noc_sched->ddrtiming = (((sysinfo->dsize == 1) ? 1 : 0) + << NOC_BW_RATIO_SHIFT) | + ((tcwl + twtr) << NOC_WR_TO_RD_SHIFT) | + ((tcl - tcwl + 2) << NOC_RD_TO_WR_SHIFT) | + (4 << NOC_BURST_LEN_SHIFT) | /* BL8 */ + ((tcwl + twr + trp + trcd) + << NOC_WR_TO_MISS_SHIFT) | + ((trtp + trp + trcd - 4) + << NOC_RD_TO_MISS_SHIFT) | + (trc << NOC_ACT_TO_ACT_SHIFT); + + if (sysinfo->dsize == 2) { + if (ddr3_cfg->coladdr == 10) { + if (ddr3_cfg->rowaddr == 15 && + sysinfo->ncs == 2) + noc_sched->ddrconf = 4; + else + noc_sched->ddrconf = 0; + } else if (ddr3_cfg->coladdr == 11) { + noc_sched->ddrconf = 1; + } + } else { + if (ddr3_cfg->coladdr == 9) { + if (ddr3_cfg->rowaddr == 13) + noc_sched->ddrconf = 2; + else if (ddr3_cfg->rowaddr == 14) + noc_sched->ddrconf = 15; + } else if (ddr3_cfg->coladdr == 10) { + if (ddr3_cfg->rowaddr == 14 && + sysinfo->ncs == 2) + noc_sched->ddrconf = 14; + else if (ddr3_cfg->rowaddr == 15 && + sysinfo->ncs == 2) + noc_sched->ddrconf = 9; + else + noc_sched->ddrconf = 3; + } else if (ddr3_cfg->coladdr == 11) { + if (ddr3_cfg->rowaddr == 15 && + sysinfo->ncs == 2) + noc_sched->ddrconf = 4; + else + noc_sched->ddrconf = 0; + } else if (ddr3_cfg->coladdr == 12) { + if (ddr3_cfg->rowaddr == 14) + noc_sched->ddrconf = 1; + } + } + + /* Disable MMDC arbitration/reordering */ + mmdc0->maarcr = 0x14420000; + } + /* Step 13: Deassert config request - init complete */ mmdc0->mdscr = 0x00000000; diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c index 46484813d2..0d39dab7ea 100644 --- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -118,12 +118,26 @@ void init_wdog(void) disable_wdog(WDG2_RBASE); } +static bool ldo_mode_is_enabled(void) +{ + unsigned int reg; + + reg = readl(PMC0_BASE_ADDR + PMC0_CTRL); + if (reg & PMC0_CTRL_LDOEN) + return true; + else + return false; +} + #if !defined(CONFIG_SPL) || (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) #if defined(CONFIG_LDO_ENABLED_MODE) static void init_ldo_mode(void) { unsigned int reg; + if (ldo_mode_is_enabled()) + return; + /* Set LDOOKDIS */ setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_LDOOKDIS); @@ -193,21 +207,6 @@ const char *get_imx_type(u32 imxtype) return "7ULP"; } -#define PMC0_BASE_ADDR 0x410a1000 -#define PMC0_CTRL 0x28 -#define PMC0_CTRL_LDOEN BIT(31) - -static bool ldo_mode_is_enabled(void) -{ - unsigned int reg; - - reg = readl(PMC0_BASE_ADDR + PMC0_CTRL); - if (reg & PMC0_CTRL_LDOEN) - return true; - else - return false; -} - int print_cpuinfo(void) { u32 cpurev; diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c index 33ce7e8ff1..b6f8b11a10 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6.c +++ b/board/dhelectronics/dh_imx6/dh_imx6.c @@ -28,10 +28,7 @@ #include <fsl_esdhc_imx.h> #include <fuse.h> #include <i2c_eeprom.h> -#include <miiphy.h> #include <mmc.h> -#include <net.h> -#include <netdev.h> #include <usb.h> #include <usb/ehci-ci.h> @@ -52,24 +49,6 @@ int overwrite_console(void) return 1; } -#ifdef CONFIG_FEC_MXC -static void eth_phy_reset(void) -{ - /* Reset PHY */ - gpio_direction_output(IMX_GPIO_NR(5, 0) , 0); - udelay(500); - gpio_set_value(IMX_GPIO_NR(5, 0), 1); - - /* Enable VIO */ - gpio_direction_output(IMX_GPIO_NR(1, 7) , 0); - - /* - * KSZ9021 PHY needs at least 10 mSec after PHY reset - * is released to stabilize - */ - mdelay(10); -} - static int setup_fec_clock(void) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; @@ -80,34 +59,6 @@ static int setup_fec_clock(void) return enable_fec_anatop_clock(0, ENET_50MHZ); } -int board_eth_init(bd_t *bis) -{ - uint32_t base = IMX_FEC_BASE; - struct mii_dev *bus = NULL; - struct phy_device *phydev = NULL; - - gpio_request(IMX_GPIO_NR(5, 0), "PHY-reset"); - gpio_request(IMX_GPIO_NR(1, 7), "VIO"); - - setup_fec_clock(); - - eth_phy_reset(); - - bus = fec_get_miibus(base, -1); - if (!bus) - return -EINVAL; - - /* Scan PHY 0 */ - phydev = phy_find_by_mask(bus, 0xf, PHY_INTERFACE_MODE_RGMII); - if (!phydev) { - printf("Ethernet PHY not found!\n"); - return -EINVAL; - } - - return fec_probe(bis, -1, base, bus, phydev); -} -#endif - #ifdef CONFIG_USB_EHCI_MX6 static void setup_usb(void) { @@ -190,6 +141,8 @@ int board_init(void) setup_dhcom_mac_from_fuse(); + setup_fec_clock(); + return 0; } diff --git a/board/freescale/imx8mm_evk/imx8mm_evk.c b/board/freescale/imx8mm_evk/imx8mm_evk.c index c5fd940eeb..53ebb949df 100644 --- a/board/freescale/imx8mm_evk/imx8mm_evk.c +++ b/board/freescale/imx8mm_evk/imx8mm_evk.c @@ -15,7 +15,11 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { - gd->ram_size = PHYS_SDRAM_SIZE; + /* rom_pointer[1] contains the size of TEE occupies */ + if (rom_pointer[1]) + gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1]; + else + gd->ram_size = PHYS_SDRAM_SIZE; return 0; } diff --git a/board/freescale/imx8qxp_mek/spl.c b/board/freescale/imx8qxp_mek/spl.c index cb4006eb2a..e4e4cbe716 100644 --- a/board/freescale/imx8qxp_mek/spl.c +++ b/board/freescale/imx8qxp_mek/spl.c @@ -12,9 +12,24 @@ #include <dm/uclass-internal.h> #include <dm/device-internal.h> #include <dm/lists.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/arch/sci/sci.h> +#include <asm/arch/imx8-pins.h> +#include <asm/arch/iomux.h> DECLARE_GLOBAL_DATA_PTR; +#define GPIO_PAD_CTRL ((SC_PAD_CONFIG_NORMAL << PADRING_CONFIG_SHIFT) | \ + (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \ + (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \ + (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT)) + +#define USDHC2_SD_PWR IMX_GPIO_NR(4, 19) +static iomux_cfg_t usdhc2_sd_pwr[] = { + SC_P_USDHC1_RESET_B | MUX_PAD_CTRL(GPIO_PAD_CTRL), +}; + void spl_board_init(void) { struct udevice *dev; @@ -32,6 +47,9 @@ void spl_board_init(void) timer_init(); + imx8_iomux_setup_multiple_pads(usdhc2_sd_pwr, ARRAY_SIZE(usdhc2_sd_pwr)); + gpio_direction_output(USDHC2_SD_PWR, 0); + preloader_console_init(); puts("Normal Boot\n"); diff --git a/board/freescale/imxrt1020-evk/Kconfig b/board/freescale/imxrt1020-evk/Kconfig new file mode 100644 index 0000000000..d00cbff094 --- /dev/null +++ b/board/freescale/imxrt1020-evk/Kconfig @@ -0,0 +1,22 @@ +if TARGET_IMXRT1020_EVK + +config SYS_BOARD + string + default "imxrt1020-evk" + +config SYS_VENDOR + string + default "freescale" + +config SYS_SOC + string + default "imxrt1020" + +config SYS_CONFIG_NAME + string + default "imxrt1020-evk" + +config IMX_CONFIG + default "board/freescale/imxrt1020-evk/imximage.cfg" + +endif diff --git a/board/freescale/imxrt1020-evk/MAINTAINERS b/board/freescale/imxrt1020-evk/MAINTAINERS new file mode 100644 index 0000000000..05f017b2ba --- /dev/null +++ b/board/freescale/imxrt1020-evk/MAINTAINERS @@ -0,0 +1,6 @@ +IMXRT1020 EVALUATION KIT +M: Giulio Benetti <giulio.benetti@benettiengineering.com> +S: Maintained +F: board/freescale/imxrt1020-evk +F: include/configs/imxrt1020-evk.h +F: configs/imxrt1020-evk_defconfig diff --git a/board/freescale/imxrt1020-evk/Makefile b/board/freescale/imxrt1020-evk/Makefile new file mode 100644 index 0000000000..807dc7c35e --- /dev/null +++ b/board/freescale/imxrt1020-evk/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2020 +# Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + +obj-y := imxrt1020-evk.o diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README new file mode 100644 index 0000000000..3da72fdad2 --- /dev/null +++ b/board/freescale/imxrt1020-evk/README @@ -0,0 +1,31 @@ +How to use U-Boot on NXP i.MXRT1020 EVK +----------------------------------------------- + +- Build U-Boot for i.MXRT1020 EVK: + +$ make mrproper +$ make imxrt1020-evk_defconfig +$ make + +This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the micro SD card: + +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + +- Flash the u-boot.img image into the micro SD card: + +sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=128; sync + +- Jumper settings: + +SW8: 0 1 1 0 + +where 0 means bottom position and 1 means top position (from the +switch label numbers reference). + +- Connect the USB cable between the EVK and the PC for the console. +(The USB console connector is the one close the ethernet connector) + +- Insert the micro SD card in the board, power it up and U-Boot messages should +come up. diff --git a/board/freescale/imxrt1020-evk/imximage.cfg b/board/freescale/imxrt1020-evk/imximage.cfg new file mode 100644 index 0000000000..9bcc2c1590 --- /dev/null +++ b/board/freescale/imxrt1020-evk/imximage.cfg @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2020 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#define __ASSEMBLY__ +#include <config.h> + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi/sd/nand/onenand, qspi/nor + */ + +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* Set all FlexRAM as OCRAM(01b) */ +DATA 4 0x400AC044 0x00005555 +/* Use FLEXRAM_BANK_CFG to config FlexRAM */ +SET_BIT 4 0x400AC040 0x4 diff --git a/board/freescale/imxrt1020-evk/imxrt1020-evk.c b/board/freescale/imxrt1020-evk/imxrt1020-evk.c new file mode 100644 index 0000000000..06ad524d5d --- /dev/null +++ b/board/freescale/imxrt1020-evk/imxrt1020-evk.c @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include <common.h> +#include <dm.h> +#include <ram.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/armv7m.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ +#ifndef CONFIG_SUPPORT_SPL + int rv; + struct udevice *dev; + + rv = uclass_get_device(UCLASS_RAM, 0, &dev); + if (rv) { + debug("DRAM init failed: %d\n", rv); + return rv; + } + +#endif + return fdtdec_setup_mem_size_base(); +} + +int dram_init_banksize(void) +{ + return fdtdec_setup_memory_banksize(); +} + +#ifdef CONFIG_SPL_BUILD +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + debug("SPL: booting kernel\n"); + /* break into full u-boot on 'c' */ + return serial_tstc() && serial_getc() == 'c'; +} +#endif + +int spl_dram_init(void) +{ + struct udevice *dev; + int rv; + + rv = uclass_get_device(UCLASS_RAM, 0, &dev); + if (rv) + debug("DRAM init failed: %d\n", rv); + return rv; +} + +void spl_board_init(void) +{ + spl_dram_init(); + preloader_console_init(); + arch_cpu_init(); /* to configure mpu for sdram rw permissions */ +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_MMC1; +} +#endif + +u32 get_board_rev(void) +{ + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100; + + return 0; +} diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 9cb5b14f13..07941fb156 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -196,56 +196,6 @@ int board_ehci_hcd_init(int port) #endif #ifdef CONFIG_FEC_MXC -/* - * pin conflicts for fec1 and fec2, GPIO1_IO06 and GPIO1_IO07 can only - * be used for ENET1 or ENET2, cannot be used for both. - */ -static iomux_v3_cfg_t const fec1_pads[] = { - MX6_PAD_GPIO1_IO06__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL), - MX6_PAD_GPIO1_IO07__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), - MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), -}; - -static iomux_v3_cfg_t const fec2_pads[] = { - MX6_PAD_GPIO1_IO06__ENET2_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL), - MX6_PAD_GPIO1_IO07__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - - MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), - MX6_PAD_ENET2_TX_EN__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - - MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_RX_EN__ENET2_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_RX_ER__ENET2_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), -}; - -static void setup_iomux_fec(int fec_id) -{ - if (fec_id == 0) - imx_iomux_v3_setup_multiple_pads(fec1_pads, - ARRAY_SIZE(fec1_pads)); - else - imx_iomux_v3_setup_multiple_pads(fec2_pads, - ARRAY_SIZE(fec2_pads)); -} - -int board_eth_init(bd_t *bis) -{ - setup_iomux_fec(CONFIG_FEC_ENET_DEV); - - return fecmxc_initialize_multi(bis, CONFIG_FEC_ENET_DEV, - CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); -} - static int setup_fec(int fec_id) { struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; diff --git a/board/freescale/mx6ullevk/mx6ullevk.c b/board/freescale/mx6ullevk/mx6ullevk.c index e1eddbff95..3f1ecce10f 100644 --- a/board/freescale/mx6ullevk/mx6ullevk.c +++ b/board/freescale/mx6ullevk/mx6ullevk.c @@ -19,6 +19,7 @@ #include <fsl_esdhc_imx.h> #include <linux/sizes.h> #include <mmc.h> +#include <miiphy.h> DECLARE_GLOBAL_DATA_PTR; @@ -60,11 +61,57 @@ int board_early_init_f(void) return 0; } +#ifdef CONFIG_FEC_MXC +static int setup_fec(int fec_id) +{ + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; + int ret; + + if (fec_id == 0) { + /* + * Use 50MHz anatop loopback REF_CLK1 for ENET1, + * clear gpr1[13], set gpr1[17]. + */ + clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, + IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK); + } else { + /* + * Use 50MHz anatop loopback REF_CLK2 for ENET2, + * clear gpr1[14], set gpr1[18]. + */ + clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC2_MASK, + IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK); + } + + ret = enable_fec_anatop_clock(fec_id, ENET_50MHZ); + if (ret) + return ret; + + enable_enet_clk(1); + + return 0; +} + +int board_phy_config(struct phy_device *phydev) +{ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190); + + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} +#endif + int board_init(void) { /* Address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; +#ifdef CONFIG_FEC_MXC + setup_fec(CONFIG_FEC_ENET_DEV); +#endif + return 0; } diff --git a/board/k+p/kp_imx53/kp_imx53.c b/board/k+p/kp_imx53/kp_imx53.c index 2f57310e27..eb5b67d1e6 100644 --- a/board/k+p/kp_imx53/kp_imx53.c +++ b/board/k+p/kp_imx53/kp_imx53.c @@ -48,7 +48,7 @@ static int power_init(void) struct udevice *dev; int ret; - ret = pmic_get("mc34708", &dev); + ret = pmic_get("mc34708@8", &dev); if (ret) { printf("%s: mc34708 not found !\n", __func__); return ret; diff --git a/board/toradex/verdin-imx8mm/verdin-imx8mm.c b/board/toradex/verdin-imx8mm/verdin-imx8mm.c index 16b9fa1ec1..cb9b4e3b0a 100644 --- a/board/toradex/verdin-imx8mm/verdin-imx8mm.c +++ b/board/toradex/verdin-imx8mm/verdin-imx8mm.c @@ -5,6 +5,7 @@ #include <common.h> #include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> #include <miiphy.h> #include <netdev.h> @@ -13,7 +14,11 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { - gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + /* rom_pointer[1] contains the size of TEE occupies */ + if (rom_pointer[1]) + gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1]; + else + gd->ram_size = PHYS_SDRAM_SIZE; return 0; } diff --git a/board/tqc/tqma6/Kconfig b/board/tqc/tqma6/Kconfig index 6df4134286..084fdb5230 100644 --- a/board/tqc/tqma6/Kconfig +++ b/board/tqc/tqma6/Kconfig @@ -63,6 +63,17 @@ choice config MBA6 bool "TQMa6 on MBa6 Starterkit" + select DM_ETH + select USB + select DM_USB + select CMD_USB + select USB_STORAGE + select USB_HOST_ETHER + select USB_ETHER_SMSC95XX + select PHYLIB + select PHY_MICREL + select PHY_MICREL_KSZ90X1 + select MXC_UART help Select the MBa6 starterkit. This features a GigE Phy, USB, SD-Card etc. @@ -74,6 +85,10 @@ config WRU4 endchoice +config SYS_TEXT_BASE + default 0x2fc00000 if TQMA6S + default 0x4fc00000 if TQMA6Q || TQMA6DL + config IMX_CONFIG default "board/tqc/tqma6/tqma6q.cfg" if TQMA6Q default "board/tqc/tqma6/tqma6dl.cfg" if TQMA6DL diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c index c8ddc2c1f8..675341abdd 100644 --- a/board/tqc/tqma6/tqma6.c +++ b/board/tqc/tqma6/tqma6.c @@ -60,6 +60,7 @@ int dram_init(void) static const uint16_t tqma6_emmc_dsr = 0x0100; +#ifndef CONFIG_DM_MMC /* eMMC on USDHCI3 always present */ static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = { NEW_PAD_CTRL(MX6_PAD_SD3_CLK__SD3_CLK, USDHC_PAD_CTRL), @@ -132,7 +133,9 @@ int board_mmc_init(bd_t *bis) return 0; } +#endif +#ifndef CONFIG_DM_SPI static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = { /* SS1 */ NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL), @@ -164,7 +167,9 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs) (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1; } #endif +#endif +#ifdef CONFIG_SYS_I2C static struct i2c_pads_info tqma6_i2c3_pads = { /* I2C3: on board LM75, M24C64, */ .scl = { @@ -194,6 +199,7 @@ static void tqma6_setup_i2c(void) if (ret) printf("setup I2C3 failed: %d\n", ret); } +#endif int board_early_init_f(void) { @@ -205,8 +211,12 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; +#ifndef CONFIG_DM_SPI tqma6_iomuxc_spi(); +#endif +#ifdef CONFIG_SYS_I2C tqma6_setup_i2c(); +#endif tqma6_bb_board_init(); @@ -235,6 +245,7 @@ static const char *tqma6_get_boardname(void) }; } +#ifdef CONFIG_POWER /* setup board specific PMIC */ int power_init_board(void) { @@ -251,6 +262,7 @@ int power_init_board(void) return 0; } +#endif int board_late_init(void) { diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c index 154ea0e925..a5b7587737 100644 --- a/board/tqc/tqma6/tqma6_mba6.c +++ b/board/tqc/tqma6/tqma6_mba6.c @@ -68,13 +68,6 @@ #endif -#define ENET_RX_PAD_CTRL (PAD_CTL_DSE_34ohm) -#define ENET_TX_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_34ohm) -#define ENET_CLK_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \ - PAD_CTL_DSE_34ohm) -#define ENET_MDIO_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_60ohm) - /* disable on die termination for RGMII */ #define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM_DISABLE 0x00000000 /* optimised drive strength for 1.0 .. 1.3 V signal on RGMII */ @@ -82,34 +75,6 @@ /* optimised drive strength for 1.3 .. 2.5 V signal on RGMII */ #define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII_1P5V 0x000C0000 -#define ENET_PHY_RESET_GPIO IMX_GPIO_NR(1, 25) - -static iomux_v3_cfg_t const mba6_enet_pads[] = { - NEW_PAD_CTRL(MX6_PAD_ENET_MDIO__ENET_MDIO, ENET_MDIO_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_ENET_MDC__ENET_MDC, ENET_MDIO_PAD_CTRL), - - NEW_PAD_CTRL(MX6_PAD_RGMII_TXC__RGMII_TXC, ENET_TX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_TD0__RGMII_TD0, ENET_TX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_TD1__RGMII_TD1, ENET_TX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_TD2__RGMII_TD2, ENET_TX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_TD3__RGMII_TD3, ENET_TX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL, - ENET_TX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_ENET_REF_CLK__ENET_TX_CLK, ENET_CLK_PAD_CTRL), - /* - * these pins are also used for config strapping by phy - */ - NEW_PAD_CTRL(MX6_PAD_RGMII_RD0__RGMII_RD0, ENET_RX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_RD1__RGMII_RD1, ENET_RX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_RD2__RGMII_RD2, ENET_RX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_RD3__RGMII_RD3, ENET_RX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_RXC__RGMII_RXC, ENET_RX_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL, - ENET_RX_PAD_CTRL), - /* KSZ9031 PHY Reset */ - NEW_PAD_CTRL(MX6_PAD_ENET_CRS_DV__GPIO1_IO25, GPIO_OUT_PAD_CTRL), -}; - static void mba6_setup_iomuxc_enet(void) { struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; @@ -121,22 +86,6 @@ static void mba6_setup_iomuxc_enet(void) (void *)IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM); __raw_writel(IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII_1P5V, (void *)IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII); - - imx_iomux_v3_setup_multiple_pads(mba6_enet_pads, - ARRAY_SIZE(mba6_enet_pads)); - - /* Reset PHY */ - gpio_direction_output(ENET_PHY_RESET_GPIO , 0); - /* Need delay 10ms after power on according to KSZ9031 spec */ - mdelay(10); - gpio_set_value(ENET_PHY_RESET_GPIO, 1); - /* - * KSZ9031 manual: 100 usec wait time after reset before communication - * over MDIO - * BUGBUG: hardware has an RC const that needs > 10 msec from 0->1 on - * reset before the phy sees a high level - */ - mdelay(15); } static iomux_v3_cfg_t const mba6_uart2_pads[] = { @@ -150,91 +99,14 @@ static void mba6_setup_iomuxc_uart(void) ARRAY_SIZE(mba6_uart2_pads)); } -#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4) -#define USDHC2_WP_GPIO IMX_GPIO_NR(1, 2) - -int tqma6_bb_board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - if (cfg->esdhc_base == USDHC2_BASE_ADDR) - ret = !gpio_get_value(USDHC2_CD_GPIO); - - return ret; -} - -int tqma6_bb_board_mmc_getwp(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - if (cfg->esdhc_base == USDHC2_BASE_ADDR) - ret = gpio_get_value(USDHC2_WP_GPIO); - - return ret; -} - -static struct fsl_esdhc_cfg mba6_usdhc_cfg = { - .esdhc_base = USDHC2_BASE_ADDR, - .max_bus_width = 4, -}; - -static iomux_v3_cfg_t const mba6_usdhc2_pads[] = { - NEW_PAD_CTRL(MX6_PAD_SD2_CLK__SD2_CLK, USDHC_CLK_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD2_CMD__SD2_CMD, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD2_DAT0__SD2_DATA0, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD2_DAT1__SD2_DATA1, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD2_DAT2__SD2_DATA2, USDHC_PAD_CTRL), - NEW_PAD_CTRL(MX6_PAD_SD2_DAT3__SD2_DATA3, USDHC_PAD_CTRL), - /* CD */ - NEW_PAD_CTRL(MX6_PAD_GPIO_4__GPIO1_IO04, GPIO_IN_PAD_CTRL), - /* WP */ - NEW_PAD_CTRL(MX6_PAD_GPIO_2__GPIO1_IO02, GPIO_IN_PAD_CTRL), -}; - -int tqma6_bb_board_mmc_init(bd_t *bis) -{ - imx_iomux_v3_setup_multiple_pads(mba6_usdhc2_pads, - ARRAY_SIZE(mba6_usdhc2_pads)); - gpio_direction_input(USDHC2_CD_GPIO); - gpio_direction_input(USDHC2_WP_GPIO); - - mba6_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - if (fsl_esdhc_initialize(bis, &mba6_usdhc_cfg)) - puts("Warning: failed to initialize SD\n"); - - return 0; -} - -static struct i2c_pads_info mba6_i2c1_pads = { -/* I2C1: MBa6x */ - .scl = { - .i2c_mode = NEW_PAD_CTRL(MX6_PAD_CSI0_DAT9__I2C1_SCL, - I2C_PAD_CTRL), - .gpio_mode = NEW_PAD_CTRL(MX6_PAD_CSI0_DAT9__GPIO5_IO27, - I2C_PAD_CTRL), - .gp = IMX_GPIO_NR(5, 27) - }, - .sda = { - .i2c_mode = NEW_PAD_CTRL(MX6_PAD_CSI0_DAT8__I2C1_SDA, - I2C_PAD_CTRL), - .gpio_mode = NEW_PAD_CTRL(MX6_PAD_CSI0_DAT8__GPIO5_IO26, - I2C_PAD_CTRL), - .gp = IMX_GPIO_NR(5, 26) - } -}; - -static void mba6_setup_i2c(void) +int board_mmc_get_env_dev(int devno) { - int ret; /* - * use logical index for bus, e.g. I2C1 -> 0 - * warn on error + * This assumes that the baseboard registered + * the boot device first ... + * Note: SDHC3 == idx2 */ - ret = setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mba6_i2c1_pads); - if (ret) - printf("setup I2C1 failed: %d\n", ret); + return (2 == devno) ? 0 : 1; } int board_phy_config(struct phy_device *phydev) @@ -284,37 +156,6 @@ int board_phy_config(struct phy_device *phydev) return 0; } -int board_eth_init(bd_t *bis) -{ - uint32_t base = IMX_FEC_BASE; - struct mii_dev *bus = NULL; - struct phy_device *phydev = NULL; - int ret; - - bus = fec_get_miibus(base, -1); - if (!bus) - return -EINVAL; - /* scan phy */ - phydev = phy_find_by_mask(bus, (0xf << CONFIG_FEC_MXC_PHYADDR), - PHY_INTERFACE_MODE_RGMII); - - if (!phydev) { - ret = -EINVAL; - goto free_bus; - } - ret = fec_probe(bis, -1, base, bus, phydev); - if (ret) - goto free_phydev; - - return 0; - -free_phydev: - free(phydev); -free_bus: - free(bus); - return ret; -} - int tqma6_bb_board_early_init_f(void) { mba6_setup_iomuxc_uart(); @@ -324,8 +165,6 @@ int tqma6_bb_board_early_init_f(void) int tqma6_bb_board_init(void) { - mba6_setup_i2c(); - /* do it here - to have reset completed */ mba6_setup_iomuxc_enet(); return 0; diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 5725c5816c..fb2f3c1fd2 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -369,7 +369,7 @@ int power_init_board(void) reg = pmic_reg_read(dev, PFUZE100_DEVICEID); if (reg < 0) { - printf("pmic_reg_read() ret %d\n", reg); + debug("pmic_reg_read() ret %d\n", reg); return 0; } printf("PMIC: PFUZE100 ID=0x%02x\n", reg); @@ -404,6 +404,7 @@ static const struct boot_mode board_boot_modes[] = { static bool is_revc1(void) { SETUP_IOMUX_PADS(rev_detection_pad); + gpio_request(REV_DETECTION, "REV_DETECT"); gpio_direction_input(REV_DETECTION); if (gpio_get_value(REV_DETECTION)) @@ -442,6 +443,14 @@ int board_late_init(void) env_set("board_name", "B1"); #endif setup_iomux_enet(); + + if (is_revd1()) + puts("Board: Wandboard rev D1\n"); + else if (is_revc1()) + puts("Board: Wandboard rev C1\n"); + else + puts("Board: Wandboard rev B1\n"); + return 0; } @@ -466,31 +475,17 @@ int board_init(void) return 0; } -int checkboard(void) -{ - gpio_request(REV_DETECTION, "REV_DETECT"); - - if (is_revd1()) - puts("Board: Wandboard rev D1\n"); - else if (is_revc1()) - puts("Board: Wandboard rev C1\n"); - else - puts("Board: Wandboard rev B1\n"); - - return 0; -} - #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { if (is_mx6dq()) { - if (!strcmp(name, "imx6q-wandboard-revb1")) + if (!strcmp(name, "imx6q-wandboard-revd1")) return 0; } else if (is_mx6dqp()) { if (!strcmp(name, "imx6qp-wandboard-revd1")) return 0; } else if (is_mx6dl() || is_mx6solo()) { - if (!strcmp(name, "imx6dl-wandboard-revb1")) + if (!strcmp(name, "imx6dl-wandboard-revd1")) return 0; } diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index cbfc3c394e..40de1d8203 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -74,6 +74,8 @@ CONFIG_SPI_FLASH_MTD=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y diff --git a/configs/imxrt1020-evk_defconfig b/configs/imxrt1020-evk_defconfig new file mode 100644 index 0000000000..2f35df1896 --- /dev/null +++ b/configs/imxrt1020-evk_defconfig @@ -0,0 +1,67 @@ +CONFIG_ARM=y +CONFIG_ARCH_IMXRT=y +CONFIG_SYS_TEXT_BASE=0x80002000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_ENV_OFFSET=0x80000 +CONFIG_DM_GPIO=y +CONFIG_TARGET_IMXRT1020_EVK=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_SIZE_LIMIT=131072 +CONFIG_SPL=y +CONFIG_SPL_TEXT_BASE=0x20209000 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_SD_BOOT=y +# CONFIG_USE_BOOTCOMMAND is not set +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_SPL_BOARD_INIT=y +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100 +# CONFIG_SPL_CRC32_SUPPORT is not set +# CONFIG_SPL_DM_GPIO is not set +# CONFIG_BOOTM_NETBSD is not set +# CONFIG_BOOTM_PLAN9 is not set +# CONFIG_BOOTM_RTEMS is not set +# CONFIG_BOOTM_VXWORKS is not set +# CONFIG_CMD_MII is not set +# CONFIG_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imxrt1020-evk" +CONFIG_ENV_IS_NOWHERE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_TFTP_BLOCKSIZE=512 +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +# CONFIG_OF_TRANSLATE is not set +CONFIG_SPL_CLK_COMPOSITE_CCF=y +CONFIG_CLK_COMPOSITE_CCF=y +CONFIG_SPL_CLK_IMXRT1020=y +CONFIG_CLK_IMXRT1020=y +CONFIG_MXC_GPIO=y +# CONFIG_INPUT is not set +CONFIG_DM_MMC=y +CONFIG_FSL_USDHC=y +CONFIG_DM_ETH=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMXRT=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_IMXRT_SDRAM=y +CONFIG_FSL_LPUART=y +CONFIG_TIMER=y +CONFIG_SPL_TIMER=y +CONFIG_SHA1=y +CONFIG_SHA256=y +CONFIG_HEXDUMP=y diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig index 71970552c0..25d0ba191c 100644 --- a/configs/imxrt1050-evk_defconfig +++ b/configs/imxrt1050-evk_defconfig @@ -1,4 +1,6 @@ CONFIG_ARM=y +CONFIG_SYS_DCACHE_OFF=y +# CONFIG_SPL_SYS_DCACHE_OFF is not set CONFIG_ARCH_IMXRT=y CONFIG_SYS_TEXT_BASE=0x80002000 CONFIG_SPL_GPIO_SUPPORT=y @@ -17,6 +19,7 @@ CONFIG_SPL_TEXT_BASE=0x20209000 CONFIG_DISTRO_DEFAULTS=y CONFIG_SD_BOOT=y # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set @@ -62,6 +65,9 @@ CONFIG_IMXRT_SDRAM=y CONFIG_FSL_LPUART=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y +CONFIG_DM_VIDEO=y +CONFIG_BACKLIGHT_GPIO=y +CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SHA1=y CONFIG_SHA256=y CONFIG_HEXDUMP=y diff --git a/configs/kp_imx53_defconfig b/configs/kp_imx53_defconfig index f29dec0161..096ba53236 100644 --- a/configs/kp_imx53_defconfig +++ b/configs/kp_imx53_defconfig @@ -40,6 +40,7 @@ CONFIG_FSL_ESDHC_IMX=y CONFIG_MTD=y CONFIG_PHYLIB=y CONFIG_PHY_SMSC=y +CONFIG_PHY_FIXED=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig index 53ff67c2bd..2a7f5fddf4 100644 --- a/configs/mx6ul_14x14_evk_defconfig +++ b/configs/mx6ul_14x14_evk_defconfig @@ -56,6 +56,7 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ8XXX=y +CONFIG_FEC_MXC=y CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_PINCTRL=y diff --git a/configs/mx6ull_14x14_evk_defconfig b/configs/mx6ull_14x14_evk_defconfig index 2c69d8d6de..c16ecfab49 100644 --- a/configs/mx6ull_14x14_evk_defconfig +++ b/configs/mx6ull_14x14_evk_defconfig @@ -38,9 +38,17 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=40000000 CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHYLIB=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ8XXX=y +CONFIG_FEC_MXC=y +CONFIG_DM_ETH=y +CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_QSPI=y diff --git a/configs/mx6ulz_14x14_evk_defconfig b/configs/mx6ulz_14x14_evk_defconfig index b854c36c77..92d73a85c8 100644 --- a/configs/mx6ulz_14x14_evk_defconfig +++ b/configs/mx6ulz_14x14_evk_defconfig @@ -29,6 +29,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6ulz-14x14-evk" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +# CONFIG_NET is not set CONFIG_DM_74X164=y CONFIG_DM_I2C=y CONFIG_DM_MMC=y diff --git a/configs/tqma6dl_mba6_mmc_defconfig b/configs/tqma6dl_mba6_mmc_defconfig index a4facb6719..d002187209 100644 --- a/configs/tqma6dl_mba6_mmc_defconfig +++ b/configs/tqma6dl_mba6_mmc_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x4fc00000 CONFIG_TARGET_TQMA6=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 @@ -13,16 +12,13 @@ CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -32,21 +28,26 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mba6b" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_SYS_I2C_MXC=y CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_MII=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_OF_LIBFDT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set diff --git a/configs/tqma6dl_mba6_spi_defconfig b/configs/tqma6dl_mba6_spi_defconfig index e21b421977..7554c3d969 100644 --- a/configs/tqma6dl_mba6_spi_defconfig +++ b/configs/tqma6dl_mba6_spi_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x4fc00000 CONFIG_TARGET_TQMA6=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x10000 @@ -16,16 +15,13 @@ CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -35,22 +31,27 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mba6b" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_SYS_I2C_MXC=y CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_MII=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_OF_LIBFDT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set diff --git a/configs/tqma6q_mba6_mmc_defconfig b/configs/tqma6q_mba6_mmc_defconfig index 521eff6c61..5c61b75f49 100644 --- a/configs/tqma6q_mba6_mmc_defconfig +++ b/configs/tqma6q_mba6_mmc_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x4fc00000 CONFIG_TARGET_TQMA6=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 @@ -12,16 +11,13 @@ CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DEFAULT_FDT_FILE="imx6q-mba6x.dtb" CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -31,21 +27,26 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6q-mba6b" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_SYS_I2C_MXC=y CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_MII=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_OF_LIBFDT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set diff --git a/configs/tqma6q_mba6_spi_defconfig b/configs/tqma6q_mba6_spi_defconfig index 648bc64cbd..745bf17082 100644 --- a/configs/tqma6q_mba6_spi_defconfig +++ b/configs/tqma6q_mba6_spi_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x4fc00000 CONFIG_TARGET_TQMA6=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x10000 @@ -15,16 +14,13 @@ CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DEFAULT_FDT_FILE="imx6q-mba6x.dtb" CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -34,22 +30,27 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6q-mba6b" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_SYS_I2C_MXC=y CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_MII=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_OF_LIBFDT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set diff --git a/configs/tqma6s_mba6_mmc_defconfig b/configs/tqma6s_mba6_mmc_defconfig index eef63c9e4c..fc60e9a2d1 100644 --- a/configs/tqma6s_mba6_mmc_defconfig +++ b/configs/tqma6s_mba6_mmc_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x2fc00000 CONFIG_TARGET_TQMA6=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 @@ -13,16 +12,13 @@ CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -32,21 +28,26 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mba6b" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_SYS_I2C_MXC=y CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_MII=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_OF_LIBFDT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set diff --git a/configs/tqma6s_mba6_spi_defconfig b/configs/tqma6s_mba6_spi_defconfig index bfe0425991..23e3f1abc3 100644 --- a/configs/tqma6s_mba6_spi_defconfig +++ b/configs/tqma6s_mba6_spi_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x2fc00000 CONFIG_TARGET_TQMA6=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_SECT_SIZE=0x10000 @@ -16,16 +15,13 @@ CONFIG_BOOTDELAY=3 CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DEFAULT_FDT_FILE="imx6dl-mba6x.dtb" CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_EEPROM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -35,22 +31,27 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-mba6b" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_SYS_I2C_MXC=y CONFIG_FSL_USDHC=y -CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_MII=y -CONFIG_SPI=y -CONFIG_MXC_SPI=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_OF_LIBFDT=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set diff --git a/configs/tqma6s_wru4_mmc_defconfig b/configs/tqma6s_wru4_mmc_defconfig index 3a351301a1..49dcdec949 100644 --- a/configs/tqma6s_wru4_mmc_defconfig +++ b/configs/tqma6s_wru4_mmc_defconfig @@ -1,7 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y -CONFIG_SYS_TEXT_BASE=0x2fc00000 CONFIG_TARGET_TQMA6=y +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x100000 CONFIG_TQMA6S=y @@ -16,7 +18,6 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DEFAULT_FDT_FILE="imx6s-wru4.dtb" CONFIG_MISC_INIT_R=y CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Enter password in %d seconds to stop autoboot\n" @@ -40,7 +41,9 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_DM is not set CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_I2C_MXC=y CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y CONFIG_LED_STATUS_BIT=0 @@ -66,6 +69,8 @@ CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_PHYLIB=y CONFIG_MII=y +# CONFIG_SPECIFY_CONSOLE_INDEX is not set +CONFIG_MXC_UART=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_HOST_ETHER=y diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index 82e517b90f..f9a5fe479b 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -29,7 +29,6 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOUNCE_BUFFER=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_SEPARATE_BSS=y @@ -46,8 +45,8 @@ CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="imx6dl-wandboard-revb1" -CONFIG_OF_LIST="imx6q-wandboard-revb1 imx6qp-wandboard-revd1 imx6dl-wandboard-revb1" +CONFIG_DEFAULT_DEVICE_TREE="imx6dl-wandboard-revd1" +CONFIG_OF_LIST="imx6q-wandboard-revd1 imx6qp-wandboard-revd1 imx6dl-wandboard-revd1" CONFIG_MULTI_DTB_FIT=y CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig index 059bc2fbb9..96721bcbf3 100644 --- a/drivers/clk/imx/Kconfig +++ b/drivers/clk/imx/Kconfig @@ -69,6 +69,22 @@ config CLK_IMX8MP help This enables support clock driver for i.MX8MP platforms. +config SPL_CLK_IMXRT1020 + bool "SPL clock support for i.MXRT1020" + depends on ARCH_IMXRT && SPL + select SPL_CLK + select SPL_CLK_CCF + help + This enables SPL DM/DTS support for clock driver in i.MXRT1020 + +config CLK_IMXRT1020 + bool "Clock support for i.MXRT1020" + depends on ARCH_IMXRT + select CLK + select CLK_CCF + help + This enables support clock driver for i.MXRT1020 platforms. + config SPL_CLK_IMXRT1050 bool "SPL clock support for i.MXRT1050" depends on ARCH_IMXRT && SPL diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile index 1e8a49d0f3..01bbbdf3ae 100644 --- a/drivers/clk/imx/Makefile +++ b/drivers/clk/imx/Makefile @@ -17,4 +17,5 @@ obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MN) += clk-imx8mn.o clk-pll14xx.o \ obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MP) += clk-imx8mp.o clk-pll14xx.o \ clk-composite-8m.o +obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1020) += clk-imxrt1020.o obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1050) += clk-imxrt1050.o diff --git a/drivers/clk/imx/clk-imxrt1020.c b/drivers/clk/imx/clk-imxrt1020.c new file mode 100644 index 0000000000..840f783940 --- /dev/null +++ b/drivers/clk/imx/clk-imxrt1020.c @@ -0,0 +1,227 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright(C) 2020 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include <common.h> +#include <clk.h> +#include <clk-uclass.h> +#include <dm.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <dt-bindings/clock/imxrt1020-clock.h> + +#include "clk.h" + +static ulong imxrt1020_clk_get_rate(struct clk *clk) +{ + struct clk *c; + int ret; + + debug("%s(#%lu)\n", __func__, clk->id); + + ret = clk_get_by_id(clk->id, &c); + if (ret) + return ret; + + return clk_get_rate(c); +} + +static ulong imxrt1020_clk_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *c; + int ret; + + debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate); + + ret = clk_get_by_id(clk->id, &c); + if (ret) + return ret; + + return clk_set_rate(c, rate); +} + +static int __imxrt1020_clk_enable(struct clk *clk, bool enable) +{ + struct clk *c; + int ret; + + debug("%s(#%lu) en: %d\n", __func__, clk->id, enable); + + ret = clk_get_by_id(clk->id, &c); + if (ret) + return ret; + + if (enable) + ret = clk_enable(c); + else + ret = clk_disable(c); + + return ret; +} + +static int imxrt1020_clk_disable(struct clk *clk) +{ + return __imxrt1020_clk_enable(clk, 0); +} + +static int imxrt1020_clk_enable(struct clk *clk) +{ + return __imxrt1020_clk_enable(clk, 1); +} + +static struct clk_ops imxrt1020_clk_ops = { + .set_rate = imxrt1020_clk_set_rate, + .get_rate = imxrt1020_clk_get_rate, + .enable = imxrt1020_clk_enable, + .disable = imxrt1020_clk_disable, +}; + +static const char * const pll2_bypass_sels[] = {"pll2_sys", "osc", }; +static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "osc", }; + +static const char *const pre_periph_sels[] = { "pll2_sys", "pll2_pfd3_297m", "pll3_pfd3_454_74m", "arm_podf", }; +static const char *const periph_sels[] = { "pre_periph_sel", "todo", }; +static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *const lpuart_sels[] = { "pll3_80m", "osc", }; +static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; +static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; + +static int imxrt1020_clk_probe(struct udevice *dev) +{ + void *base; + + /* Anatop clocks */ + base = (void *)ANATOP_BASE_ADDR; + + clk_dm(IMXRT1020_CLK_PLL2_SYS, + imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_sys", "osc", + base + 0x30, 0x1)); + clk_dm(IMXRT1020_CLK_PLL3_USB_OTG, + imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", + base + 0x10, 0x1)); + + /* PLL bypass out */ + clk_dm(IMXRT1020_CLK_PLL2_BYPASS, + imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, + pll2_bypass_sels, + ARRAY_SIZE(pll2_bypass_sels), + CLK_SET_RATE_PARENT)); + clk_dm(IMXRT1020_CLK_PLL3_BYPASS, + imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, + pll3_bypass_sels, + ARRAY_SIZE(pll3_bypass_sels), + CLK_SET_RATE_PARENT)); + + clk_dm(IMXRT1020_CLK_PLL3_80M, + imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6)); + + clk_dm(IMXRT1020_CLK_PLL2_PFD0_352M, + imx_clk_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0)); + clk_dm(IMXRT1020_CLK_PLL2_PFD1_594M, + imx_clk_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1)); + clk_dm(IMXRT1020_CLK_PLL2_PFD2_396M, + imx_clk_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2)); + clk_dm(IMXRT1020_CLK_PLL2_PFD3_297M, + imx_clk_pfd("pll2_pfd3_297m", "pll2_sys", base + 0x100, 3)); + clk_dm(IMXRT1020_CLK_PLL3_PFD1_664_62M, + imx_clk_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, 1)); + clk_dm(IMXRT1020_CLK_PLL3_PFD3_454_74M, + imx_clk_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, 3)); + + /* CCM clocks */ + base = dev_read_addr_ptr(dev); + if (base == (void *)FDT_ADDR_T_NONE) + return -EINVAL; + + clk_dm(IMXRT1020_CLK_PRE_PERIPH_SEL, + imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, + pre_periph_sels, ARRAY_SIZE(pre_periph_sels))); + clk_dm(IMXRT1020_CLK_PERIPH_SEL, + imx_clk_mux("periph_sel", base + 0x14, 25, 1, + periph_sels, ARRAY_SIZE(periph_sels))); + clk_dm(IMXRT1020_CLK_USDHC1_SEL, + imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, + usdhc_sels, ARRAY_SIZE(usdhc_sels))); + clk_dm(IMXRT1020_CLK_USDHC2_SEL, + imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, + usdhc_sels, ARRAY_SIZE(usdhc_sels))); + clk_dm(IMXRT1020_CLK_LPUART_SEL, + imx_clk_mux("lpuart_sel", base + 0x24, 6, 1, + lpuart_sels, ARRAY_SIZE(lpuart_sels))); + clk_dm(IMXRT1020_CLK_SEMC_ALT_SEL, + imx_clk_mux("semc_alt_sel", base + 0x14, 7, 1, + semc_alt_sels, ARRAY_SIZE(semc_alt_sels))); + clk_dm(IMXRT1020_CLK_SEMC_SEL, + imx_clk_mux("semc_sel", base + 0x14, 6, 1, + semc_sels, ARRAY_SIZE(semc_sels))); + + clk_dm(IMXRT1020_CLK_AHB_PODF, + imx_clk_divider("ahb_podf", "periph_sel", + base + 0x14, 10, 3)); + clk_dm(IMXRT1020_CLK_USDHC1_PODF, + imx_clk_divider("usdhc1_podf", "usdhc1_sel", + base + 0x24, 11, 3)); + clk_dm(IMXRT1020_CLK_USDHC2_PODF, + imx_clk_divider("usdhc2_podf", "usdhc2_sel", + base + 0x24, 16, 3)); + clk_dm(IMXRT1020_CLK_LPUART_PODF, + imx_clk_divider("lpuart_podf", "lpuart_sel", + base + 0x24, 0, 6)); + clk_dm(IMXRT1020_CLK_SEMC_PODF, + imx_clk_divider("semc_podf", "semc_sel", + base + 0x14, 16, 3)); + + clk_dm(IMXRT1020_CLK_USDHC1, + imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2)); + clk_dm(IMXRT1020_CLK_USDHC2, + imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4)); + clk_dm(IMXRT1020_CLK_LPUART1, + imx_clk_gate2("lpuart1", "lpuart_podf", base + 0x7c, 24)); + clk_dm(IMXRT1020_CLK_SEMC, + imx_clk_gate2("semc", "semc_podf", base + 0x74, 4)); + +#ifdef CONFIG_SPL_BUILD + struct clk *clk, *clk1; + + clk_get_by_id(IMXRT1020_CLK_SEMC_SEL, &clk1); + clk_get_by_id(IMXRT1020_CLK_SEMC_ALT_SEL, &clk); + clk_set_parent(clk1, clk); + + /* Configure PLL3_USB_OTG to 480MHz */ + clk_get_by_id(IMXRT1020_CLK_PLL3_USB_OTG, &clk); + clk_enable(clk); + clk_set_rate(clk, 480000000UL); + + clk_get_by_id(IMXRT1020_CLK_PLL3_BYPASS, &clk1); + clk_set_parent(clk1, clk); + + clk_get_by_id(IMXRT1020_CLK_PLL2_PFD3_297M, &clk); + clk_set_rate(clk, 297000000UL); + + clk_get_by_id(IMXRT1020_CLK_PLL2_SYS, &clk); + clk_enable(clk); + clk_set_rate(clk, 528000000UL); + + clk_get_by_id(IMXRT1020_CLK_PLL2_BYPASS, &clk1); + clk_set_parent(clk1, clk); + +#endif + + return 0; +} + +static const struct udevice_id imxrt1020_clk_ids[] = { + { .compatible = "fsl,imxrt1020-ccm" }, + { }, +}; + +U_BOOT_DRIVER(imxrt1020_clk) = { + .name = "clk_imxrt1020", + .id = UCLASS_CLK, + .of_match = imxrt1020_clk_ids, + .ops = &imxrt1020_clk_ops, + .probe = imxrt1020_clk_probe, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/clk/imx/clk-imxrt1050.c b/drivers/clk/imx/clk-imxrt1050.c index 44ca52c013..329f4580c5 100644 --- a/drivers/clk/imx/clk-imxrt1050.c +++ b/drivers/clk/imx/clk-imxrt1050.c @@ -71,11 +71,30 @@ static int imxrt1050_clk_enable(struct clk *clk) return __imxrt1050_clk_enable(clk, 1); } +static int imxrt1050_clk_set_parent(struct clk *clk, struct clk *parent) +{ + struct clk *c, *cp; + int ret; + + debug("%s(#%lu), parent: %lu\n", __func__, clk->id, parent->id); + + ret = clk_get_by_id(clk->id, &c); + if (ret) + return ret; + + ret = clk_get_by_id(parent->id, &cp); + if (ret) + return ret; + + return clk_set_parent(c, cp); +} + static struct clk_ops imxrt1050_clk_ops = { .set_rate = imxrt1050_clk_set_rate, .get_rate = imxrt1050_clk_get_rate, .enable = imxrt1050_clk_enable, .disable = imxrt1050_clk_disable, + .set_parent = imxrt1050_clk_set_parent, }; static const char * const pll_ref_sels[] = {"osc", "dummy", }; @@ -90,7 +109,7 @@ static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *const lpuart_sels[] = { "pll3_80m", "osc", }; static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; -static const char *const lcdif_sels[] = { "pll2_sys", "pll3_pfd3_454_74m", "pll5_video:", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_664_62m"}; +static const char *const lcdif_sels[] = { "pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_664_62m"}; static int imxrt1050_clk_probe(struct udevice *dev) { @@ -238,9 +257,9 @@ static int imxrt1050_clk_probe(struct udevice *dev) clk_dm(IMXRT1050_CLK_LCDIF, imx_clk_gate2("lcdif", "lcdif_podf", base + 0x70, 28)); -#ifdef CONFIG_SPL_BUILD struct clk *clk, *clk1; +#ifdef CONFIG_SPL_BUILD /* bypass pll1 before setting its rate */ clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk); clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1); @@ -271,7 +290,14 @@ static int imxrt1050_clk_probe(struct udevice *dev) clk_get_by_id(IMXRT1050_CLK_PLL3_BYPASS, &clk1); clk_set_parent(clk1, clk); +#else + /* Set PLL5 for LCDIF to its default 650Mhz */ + clk_get_by_id(IMXRT1050_CLK_PLL5_VIDEO, &clk); + clk_enable(clk); + clk_set_rate(clk, 650000000UL); + clk_get_by_id(IMXRT1050_CLK_PLL5_BYPASS, &clk1); + clk_set_parent(clk1, clk); #endif return 0; diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c index 525442debf..b4a9d587e1 100644 --- a/drivers/clk/imx/clk-pllv3.c +++ b/drivers/clk/imx/clk-pllv3.c @@ -25,6 +25,7 @@ #define PLL_DENOM_OFFSET 0x20 #define BM_PLL_POWER (0x1 << 12) +#define BM_PLL_ENABLE (0x1 << 13) #define BM_PLL_LOCK (0x1 << 31) struct clk_pllv3 { @@ -32,6 +33,7 @@ struct clk_pllv3 { void __iomem *base; u32 power_bit; bool powerup_set; + u32 enable_bit; u32 div_mask; u32 div_shift; }; @@ -83,6 +85,9 @@ static int clk_pllv3_generic_enable(struct clk *clk) val |= pll->power_bit; else val &= ~pll->power_bit; + + val |= pll->enable_bit; + writel(val, pll->base); return 0; @@ -98,6 +103,9 @@ static int clk_pllv3_generic_disable(struct clk *clk) val &= ~pll->power_bit; else val |= pll->power_bit; + + val &= ~pll->enable_bit; + writel(val, pll->base); return 0; @@ -238,6 +246,7 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, return ERR_PTR(-ENOMEM); pll->power_bit = BM_PLL_POWER; + pll->enable_bit = BM_PLL_ENABLE; switch (type) { case IMX_PLLV3_GENERIC: diff --git a/drivers/power/pmic/pfuze100.c b/drivers/power/pmic/pfuze100.c index 6cf5f35f0f..db630f3ad0 100644 --- a/drivers/power/pmic/pfuze100.c +++ b/drivers/power/pmic/pfuze100.c @@ -41,7 +41,7 @@ static int pfuze100_write(struct udevice *dev, uint reg, const uint8_t *buff, static int pfuze100_read(struct udevice *dev, uint reg, uint8_t *buff, int len) { if (dm_i2c_read(dev, reg, buff, len)) { - pr_err("read error from device: %p register: %#x!\n", dev, reg); + debug("read error from device: %p register: %#x!\n", dev, reg); return -EIO; } diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 585af3d571..8a5a61c9fb 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -5,6 +5,7 @@ * Copyright (C) 2011-2013 Marek Vasut <marex@denx.de> */ #include <common.h> +#include <clk.h> #include <dm.h> #include <env.h> #include <dm/device_compat.h> @@ -52,14 +53,34 @@ __weak void mxsfb_system_setup(void) * le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0 */ -static void mxs_lcd_init(u32 fb_addr, struct ctfb_res_modes *mode, int bpp) +static void mxs_lcd_init(struct udevice *dev, u32 fb_addr, + struct display_timing *timings, int bpp) { struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; + const enum display_flags flags = timings->flags; uint32_t word_len = 0, bus_width = 0; uint8_t valid_data = 0; + uint32_t vdctrl0; +#if CONFIG_IS_ENABLED(CLK) + struct clk per_clk; + int ret; + + ret = clk_get_by_name(dev, "per", &per_clk); + if (ret) { + dev_err(dev, "Failed to get mxs clk: %d\n", ret); + return; + } + + ret = clk_set_rate(&per_clk, timings->pixelclock.typ); + if (ret < 0) { + dev_err(dev, "Failed to set mxs clk: %d\n", ret); + return; + } +#else /* Kick in the LCDIF clock */ - mxs_set_lcdclk(MXS_LCDIF_BASE, PS2KHZ(mode->pixclock)); + mxs_set_lcdclk(MXS_LCDIF_BASE, timings->pixelclock.typ / 1000); +#endif /* Restart the LCDIF block */ mxs_reset_block(®s->hw_lcdif_ctrl_reg); @@ -96,25 +117,36 @@ static void mxs_lcd_init(u32 fb_addr, struct ctfb_res_modes *mode, int bpp) mxsfb_system_setup(); - writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres, - ®s->hw_lcdif_transfer_count); - - writel(LCDIF_VDCTRL0_ENABLE_PRESENT | LCDIF_VDCTRL0_ENABLE_POL | - LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT | - LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT | - mode->vsync_len, ®s->hw_lcdif_vdctrl0); - writel(mode->upper_margin + mode->lower_margin + - mode->vsync_len + mode->yres, + writel((timings->vactive.typ << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | + timings->hactive.typ, ®s->hw_lcdif_transfer_count); + + vdctrl0 = LCDIF_VDCTRL0_ENABLE_PRESENT | LCDIF_VDCTRL0_ENABLE_POL | + LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT | + LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT | + timings->vsync_len.typ; + + if(flags & DISPLAY_FLAGS_HSYNC_HIGH) + vdctrl0 |= LCDIF_VDCTRL0_HSYNC_POL; + if(flags & DISPLAY_FLAGS_VSYNC_HIGH) + vdctrl0 |= LCDIF_VDCTRL0_VSYNC_POL; + if(flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) + vdctrl0 |= LCDIF_VDCTRL0_DOTCLK_POL; + if(flags & DISPLAY_FLAGS_DE_HIGH) + vdctrl0 |= LCDIF_VDCTRL0_ENABLE_POL; + + writel(vdctrl0, ®s->hw_lcdif_vdctrl0); + writel(timings->vback_porch.typ + timings->vfront_porch.typ + + timings->vsync_len.typ + timings->vactive.typ, ®s->hw_lcdif_vdctrl1); - writel((mode->hsync_len << LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET) | - (mode->left_margin + mode->right_margin + - mode->hsync_len + mode->xres), + writel((timings->hsync_len.typ << LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET) | + (timings->hback_porch.typ + timings->hfront_porch.typ + + timings->hsync_len.typ + timings->hactive.typ), ®s->hw_lcdif_vdctrl2); - writel(((mode->left_margin + mode->hsync_len) << + writel(((timings->hback_porch.typ + timings->hsync_len.typ) << LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET) | - (mode->upper_margin + mode->vsync_len), + (timings->vback_porch.typ + timings->vsync_len.typ), ®s->hw_lcdif_vdctrl3); - writel((0 << LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET) | mode->xres, + writel((0 << LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET) | timings->hactive.typ, ®s->hw_lcdif_vdctrl4); writel(fb_addr, ®s->hw_lcdif_cur_buf); @@ -135,10 +167,11 @@ static void mxs_lcd_init(u32 fb_addr, struct ctfb_res_modes *mode, int bpp) writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set); } -static int mxs_probe_common(struct ctfb_res_modes *mode, int bpp, u32 fb) +static int mxs_probe_common(struct udevice *dev, struct display_timing *timings, + int bpp, u32 fb) { /* Start framebuffer */ - mxs_lcd_init(fb, mode, bpp); + mxs_lcd_init(dev, fb, timings, bpp); #ifdef CONFIG_VIDEO_MXS_MODE_SYSTEM /* @@ -204,6 +237,7 @@ void *video_hw_init(void) char *penv; void *fb = NULL; struct ctfb_res_modes mode; + struct display_timing timings; puts("Video: "); @@ -260,7 +294,9 @@ void *video_hw_init(void) printf("%s\n", panel.modeIdent); - ret = mxs_probe_common(&mode, bpp, (u32)fb); + video_ctfb_mode_to_display_timing(&mode, &timings); + + ret = mxs_probe_common(NULL, &timings, bpp, (u32)fb); if (ret) goto dealloc_fb; @@ -314,7 +350,6 @@ static int mxs_video_probe(struct udevice *dev) struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); struct video_priv *uc_priv = dev_get_uclass_priv(dev); - struct ctfb_res_modes mode; struct display_timing timings; u32 bpp = 0; u32 fb_start, fb_end; @@ -327,17 +362,7 @@ static int mxs_video_probe(struct udevice *dev) if (ret) return ret; - mode.xres = timings.hactive.typ; - mode.yres = timings.vactive.typ; - mode.left_margin = timings.hback_porch.typ; - mode.right_margin = timings.hfront_porch.typ; - mode.upper_margin = timings.vback_porch.typ; - mode.lower_margin = timings.vfront_porch.typ; - mode.hsync_len = timings.hsync_len.typ; - mode.vsync_len = timings.vsync_len.typ; - mode.pixclock = HZ2PS(timings.pixelclock.typ); - - ret = mxs_probe_common(&mode, bpp, plat->base); + ret = mxs_probe_common(dev, &timings, bpp, plat->base); if (ret) return ret; @@ -358,8 +383,8 @@ static int mxs_video_probe(struct udevice *dev) return -EINVAL; } - uc_priv->xsize = mode.xres; - uc_priv->ysize = mode.yres; + uc_priv->xsize = timings.hactive.typ; + uc_priv->ysize = timings.vactive.typ; /* Enable dcache for the frame buffer */ fb_start = plat->base & ~(MMU_SECTION_SIZE - 1); @@ -420,6 +445,7 @@ static const struct udevice_id mxs_video_ids[] = { { .compatible = "fsl,imx23-lcdif" }, { .compatible = "fsl,imx28-lcdif" }, { .compatible = "fsl,imx7ulp-lcdif" }, + { .compatible = "fsl,imxrt-lcdif" }, { /* sentinel */ } }; diff --git a/drivers/video/sunxi/sunxi_display.c b/drivers/video/sunxi/sunxi_display.c index 4e1720ef7e..40ee009f62 100644 --- a/drivers/video/sunxi/sunxi_display.c +++ b/drivers/video/sunxi/sunxi_display.c @@ -615,35 +615,6 @@ static void sunxi_lcdc_backlight_enable(void) gpio_direction_output(pin, PWM_ON); } -static void sunxi_ctfb_mode_to_display_timing(const struct ctfb_res_modes *mode, - struct display_timing *timing) -{ - timing->pixelclock.typ = mode->pixclock_khz * 1000; - - timing->hactive.typ = mode->xres; - timing->hfront_porch.typ = mode->right_margin; - timing->hback_porch.typ = mode->left_margin; - timing->hsync_len.typ = mode->hsync_len; - - timing->vactive.typ = mode->yres; - timing->vfront_porch.typ = mode->lower_margin; - timing->vback_porch.typ = mode->upper_margin; - timing->vsync_len.typ = mode->vsync_len; - - timing->flags = 0; - - if (mode->sync & FB_SYNC_HOR_HIGH_ACT) - timing->flags |= DISPLAY_FLAGS_HSYNC_HIGH; - else - timing->flags |= DISPLAY_FLAGS_HSYNC_LOW; - if (mode->sync & FB_SYNC_VERT_HIGH_ACT) - timing->flags |= DISPLAY_FLAGS_VSYNC_HIGH; - else - timing->flags |= DISPLAY_FLAGS_VSYNC_LOW; - if (mode->vmode == FB_VMODE_INTERLACED) - timing->flags |= DISPLAY_FLAGS_INTERLACED; -} - static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode, bool for_ext_vga_dac) { @@ -673,7 +644,7 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode, lcdc_pll_set(ccm, 0, mode->pixclock_khz, &clk_div, &clk_double, sunxi_is_composite()); - sunxi_ctfb_mode_to_display_timing(mode, &timing); + video_ctfb_mode_to_display_timing(mode, &timing); lcdc_tcon0_mode_set(lcdc, &timing, clk_div, for_ext_vga_dac, sunxi_display.depth, CONFIG_VIDEO_LCD_DCLK_PHASE); } @@ -689,7 +660,7 @@ static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode, (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct display_timing timing; - sunxi_ctfb_mode_to_display_timing(mode, &timing); + video_ctfb_mode_to_display_timing(mode, &timing); lcdc_tcon1_mode_set(lcdc, &timing, use_portd_hvsync, sunxi_is_composite()); diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c index ac25b45f81..89003eea72 100644 --- a/drivers/video/videomodes.c +++ b/drivers/video/videomodes.c @@ -444,3 +444,32 @@ int video_edid_dtd_to_ctfb_res_modes(struct edid_detailed_timing *t, return 0; } + +void video_ctfb_mode_to_display_timing(const struct ctfb_res_modes *mode, + struct display_timing *timing) +{ + timing->pixelclock.typ = mode->pixclock_khz * 1000; + + timing->hactive.typ = mode->xres; + timing->hfront_porch.typ = mode->right_margin; + timing->hback_porch.typ = mode->left_margin; + timing->hsync_len.typ = mode->hsync_len; + + timing->vactive.typ = mode->yres; + timing->vfront_porch.typ = mode->lower_margin; + timing->vback_porch.typ = mode->upper_margin; + timing->vsync_len.typ = mode->vsync_len; + + timing->flags = 0; + + if (mode->sync & FB_SYNC_HOR_HIGH_ACT) + timing->flags |= DISPLAY_FLAGS_HSYNC_HIGH; + else + timing->flags |= DISPLAY_FLAGS_HSYNC_LOW; + if (mode->sync & FB_SYNC_VERT_HIGH_ACT) + timing->flags |= DISPLAY_FLAGS_VSYNC_HIGH; + else + timing->flags |= DISPLAY_FLAGS_VSYNC_LOW; + if (mode->vmode == FB_VMODE_INTERLACED) + timing->flags |= DISPLAY_FLAGS_INTERLACED; +} diff --git a/drivers/video/videomodes.h b/drivers/video/videomodes.h index 29a3db4ae3..aefe4ef94a 100644 --- a/drivers/video/videomodes.h +++ b/drivers/video/videomodes.h @@ -92,3 +92,14 @@ int video_get_option_int(const char *options, const char *name, int def); int video_edid_dtd_to_ctfb_res_modes(struct edid_detailed_timing *t, struct ctfb_res_modes *mode); +/** + * video_ctfb_mode_to_display_timing() - Convert a ctfb(Cathode Tube Frame + * Buffer)_res_modes struct to a + * display_timing struct. + * + * @mode: Input ctfb_res_modes structure pointer to be converted + * from + * @timing: Output display_timing structure pointer to be converted to + */ +void video_ctfb_mode_to_display_timing(const struct ctfb_res_modes *mode, + struct display_timing *timing); diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index d2ff7e9534..fb0037444f 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -146,8 +146,6 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x20000000\0" \ "fdt_addr_r=0x12100000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x11000000\0" \ "pxefile_addr_r=0x17100000\0" \ "ramdisk_addr_r=0x12200000\0" \ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index ea5ba6bfce..2a76f576a8 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -40,8 +40,6 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x82100000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x81000000\0" \ "pxefile_addr_r=0x87100000\0" \ "ramdisk_addr_r=0x82200000\0" \ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index cbc7501bcc..4cdd3c53af 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -134,8 +134,6 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x12100000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x11000000\0" \ "pxefile_addr_r=0x17100000\0" \ "ramdisk_addr_r=0x12200000\0" \ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 603ea3a053..7c00f78ef1 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -108,8 +108,6 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x82000000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x81000000\0" \ "ramdisk_addr_r=0x82100000\0" \ "scriptaddr=0x82500000\0" diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 1478ea844e..b03ccaf094 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -51,8 +51,6 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ "fdt_addr_r=0x82000000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x81000000\0" \ "pxefile_addr_r=0x87100000\0" \ "ramdisk_addr_r=0x82100000\0" \ diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h new file mode 100644 index 0000000000..8e54565f1a --- /dev/null +++ b/include/configs/imxrt1020-evk.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2020 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#ifndef __IMXRT1020_EVK_H +#define __IMXRT1020_EVK_H + +#include <asm/arch/imx-regs.h> + +#define CONFIG_SYS_INIT_SP_ADDR 0x20240000 + +#ifdef CONFIG_SUPPORT_SPL +#define CONFIG_SYS_LOAD_ADDR 0x20209000 +#else +#define CONFIG_SYS_LOAD_ADDR 0x80000000 +#define CONFIG_LOADADDR 0x80000000 +#endif + +#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 +#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 + +#define PHYS_SDRAM 0x80000000 +#define PHYS_SDRAM_SIZE (32 * 1024 * 1024) + +#define DMAMEM_SZ_ALL (1 * 1024 * 1024) +#define DMAMEM_BASE (PHYS_SDRAM + PHYS_SDRAM_SIZE - \ + DMAMEM_SZ_ALL) + +#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ + +/* + * Configuration of the external SDRAM memory + */ +#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) + +/* For SPL */ +#ifdef CONFIG_SUPPORT_SPL +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SYS_SPL_LEN 0x00008000 +#define CONFIG_SYS_UBOOT_START 0x800023FD +#endif +/* For SPL ends */ + +#endif /* __IMXRT1020_EVK_H */ diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index cdec657fb0..3a6b972d9a 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -30,6 +30,21 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */ +#ifdef CONFIG_DM_VIDEO +#define CONFIG_VIDEO_MXS +#define CONFIG_VIDEO_LOGO +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial,vidconsole\0" \ + "stderr=serial,vidconsole\0" +#endif + /* * Configuration of the external SDRAM memory */ diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index f347eeb39f..a30d2c0879 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -172,7 +172,6 @@ #endif #ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC #define CONFIG_FEC_ENET_DEV 1 #if (CONFIG_FEC_ENET_DEV == 0) diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index 7cce911314..af335bcfff 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -166,4 +166,13 @@ #define FSL_QSPI_FLASH_SIZE SZ_32M #endif +#ifdef CONFIG_CMD_NET +#define CONFIG_FEC_ENET_DEV 1 +#if (CONFIG_FEC_ENET_DEV == 0) +#define CONFIG_ETHPRIME "eth0" +#elif (CONFIG_FEC_ENET_DEV == 1) +#define CONFIG_ETHPRIME "eth1" +#endif +#endif + #endif diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 1ea6332878..895cd0324e 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -28,18 +28,11 @@ #define PHYS_SDRAM_SIZE (SZ_1G) #endif -#define CONFIG_MXC_UART - /* SPI Flash */ #define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K /* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_I2C_SPEED 100000 @@ -49,11 +42,13 @@ #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS 5 /* 32 Bytes */ #define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS 20 +#if !defined(CONFIG_DM_PMIC) #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_PFUZE100 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 #define TQMA6_PFUZE100_I2C_BUS 2 +#endif /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h index 0af52e5565..13b87e9b52 100644 --- a/include/configs/tqma6_wru4.h +++ b/include/configs/tqma6_wru4.h @@ -30,4 +30,7 @@ /* Bootcounter */ #define CONFIG_SYS_BOOTCOUNT_BE +/* I2C */ +#define CONFIG_SYS_I2C + #endif /* __CONFIG_TQMA6_WRU4_H */ diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index dc0a2efec6..82bff3608c 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -66,6 +66,12 @@ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "kernel_image=Image\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ + "\0" \ + "nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \ + "tftp ${fdt_addr} verdin/${fdtfile}; " \ + "booti ${loadaddr} - ${fdt_addr}\0" \ "setup=setenv setupargs console=${console},${baudrate} " \ "console=tty1 consoleblank=0 earlycon\0" \ "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \ diff --git a/include/dt-bindings/clock/imxrt1020-clock.h b/include/dt-bindings/clock/imxrt1020-clock.h new file mode 100644 index 0000000000..836244358b --- /dev/null +++ b/include/dt-bindings/clock/imxrt1020-clock.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright(C) 2020 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#ifndef __DT_BINDINGS_CLOCK_IMXRT1020_H +#define __DT_BINDINGS_CLOCK_IMXRT1020_H + +#define IMXRT1020_CLK_DUMMY 0 +#define IMXRT1020_CLK_CKIL 1 +#define IMXRT1020_CLK_CKIH 2 +#define IMXRT1020_CLK_OSC 3 +#define IMXRT1020_CLK_PLL2_PFD0_352M 4 +#define IMXRT1020_CLK_PLL2_PFD1_594M 5 +#define IMXRT1020_CLK_PLL2_PFD2_396M 6 +#define IMXRT1020_CLK_PLL2_PFD3_297M 7 +#define IMXRT1020_CLK_PLL3_PFD0_720M 8 +#define IMXRT1020_CLK_PLL3_PFD1_664_62M 9 +#define IMXRT1020_CLK_PLL3_PFD2_508_24M 10 +#define IMXRT1020_CLK_PLL3_PFD3_454_74M 11 +#define IMXRT1020_CLK_PLL2_198M 12 +#define IMXRT1020_CLK_PLL3_120M 13 +#define IMXRT1020_CLK_PLL3_80M 14 +#define IMXRT1020_CLK_PLL3_60M 15 +#define IMXRT1020_CLK_PLL2_BYPASS 16 +#define IMXRT1020_CLK_PLL3_BYPASS 17 +#define IMXRT1020_CLK_PLL6_BYPASS 18 +#define IMXRT1020_CLK_PRE_PERIPH_SEL 19 +#define IMXRT1020_CLK_PERIPH_SEL 20 +#define IMXRT1020_CLK_SEMC_ALT_SEL 21 +#define IMXRT1020_CLK_SEMC_SEL 22 +#define IMXRT1020_CLK_USDHC1_SEL 23 +#define IMXRT1020_CLK_USDHC2_SEL 24 +#define IMXRT1020_CLK_LPUART_SEL 25 +#define IMXRT1020_CLK_ARM_PODF 26 +#define IMXRT1020_CLK_LPUART_PODF 27 +#define IMXRT1020_CLK_USDHC1_PODF 28 +#define IMXRT1020_CLK_USDHC2_PODF 29 +#define IMXRT1020_CLK_SEMC_PODF 30 +#define IMXRT1020_CLK_AHB_PODF 31 +#define IMXRT1020_CLK_USDHC1 32 +#define IMXRT1020_CLK_USDHC2 33 +#define IMXRT1020_CLK_LPUART1 34 +#define IMXRT1020_CLK_SEMC 35 +#define IMXRT1020_CLK_PLL2_SYS 36 +#define IMXRT1020_CLK_PLL3_USB_OTG 37 +#define IMXRT1020_CLK_PLL4_AUDIO 38 +#define IMXRT1020_CLK_PLL6_ENET 39 +#define IMXRT1020_CLK_END 40 + +#endif /* __DT_BINDINGS_CLOCK_IMXRT1020_H */ diff --git a/include/dt-bindings/pinctrl/pins-imxrt1020.h b/include/dt-bindings/pinctrl/pins-imxrt1020.h new file mode 100644 index 0000000000..c6bacb7378 --- /dev/null +++ b/include/dt-bindings/pinctrl/pins-imxrt1020.h @@ -0,0 +1,763 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2020 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#ifndef _DT_BINDINGS_PINCTRL_IMXRT1020_PINFUNC_H +#define _DT_BINDINGS_PINCTRL_IMXRT1020_PINFUNC_H + +/* TODO: continue from LPI2C4_SDA_SELECT_INPUT */ + +#define IMX_PAD_SION 0x40000000 + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define MXRT1020_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x188 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_00_QTIMER2_TIMER0 0x014 0x188 0x420 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_00_LPUART4_CTS_B 0x014 0x188 0x3E0 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_00_SPDIF_SR_CLK 0x014 0x188 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x188 0x3B0 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_00_GPIO2_IO00 0x014 0x188 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_00_FLEXCAN1_TX 0x014 0x188 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_00_PIT_TRIGGER02 0x014 0x188 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x18C 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_01_QTIMER2_TIMER1 0x018 0x18C 0x424 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_01_LPUART4_RTS_B 0x018 0x18C 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_01_SPDIF_OUT 0x018 0x18C 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x18C 0x3AC 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_01_GPIO2_IO01 0x018 0x18C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_01_FLEXCAN1_RX 0x018 0x18C 0x320 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_01_PIT_TRIGGER03 0x018 0x18C 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_02_SEMC_DA02 0x01C 0x190 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_02_QTIMER2_TIMER2 0x01C 0x190 0x428 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_02_LPUART4_TX 0x01C 0x190 0x3E8 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_02_SPDIF_LOCK 0x01C 0x190 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_02_LPSPI2_SDO 0x01C 0x190 0x3B8 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_02_GPIO2_IO02 0x01C 0x190 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_02_LPI2C1_SCL 0x01C 0x190 0x37C 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_03_SEMC_DA03 0x020 0x194 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_03_QTIMER2_TIMER3 0x020 0x194 0x42C 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_03_LPUART4_RX 0x020 0x194 0x3E4 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_03_SPDIF_EXT_CLK 0x020 0x194 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_03_LPSPI2_SDI 0x020 0x194 0x3B4 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_03_GPIO2_IO03 0x020 0x194 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_03_LPI2C1_SDA 0x020 0x194 0x380 0x6 0x1 + +#define MXRT1020_IOMUXC_GPIO_EMC_04_SEMC_DA04 0x024 0x198 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_04_XBAR1_INOUT04 0x024 0x198 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_04_SPDIF_OUT 0x024 0x198 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_04_SAI2_TX_BCLK 0x024 0x198 0x464 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_04_FLEXIO1_FLEXIO16 0x024 0x198 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_04_GPIO2_IO04 0x024 0x198 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_05_SEMC_DA05 0x028 0x19C 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_05_XBAR1_INOUT05 0x028 0x19C 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_05_SPDIF_IN 0x028 0x19C 0x488 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_05_SAI2_TX_SYNC 0x028 0x19C 0x468 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_05_FLEXIO1_FLEXIO17 0x028 0x19C 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_05_GPIO2_IO05 0x028 0x19C 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_06_SEMC_DA06 0x02C 0x1A0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_06_XBAR1_INOUT06 0x02C 0x1A0 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_06_LPUART3_TX 0x02C 0x1A0 0x3DC 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_06_SAI2_TX_DATA 0x02C 0x1A0 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_06_FLEXIO1_FLEXIO18 0x02C 0x1A0 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_06_GPIO2_IO06 0x02C 0x1A0 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_07_SEMC_DA07 0x030 0x1A4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_07_XBAR1_INOUT07 0x030 0x1A4 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_07_LPUART3_RX 0x030 0x1A4 0x3D8 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_07_SAI2_RX_SYNC 0x030 0x1A4 0x460 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_07_FLEXIO1_FLEXIO19 0x030 0x1A4 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_07_GPIO2_IO07 0x030 0x1A4 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_08_SEMC_DM00 0x034 0x1A8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_08_XBAR1_INOUT08 0x034 0x1A8 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_08_FLEXCAN2_TX 0x034 0x1A8 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_08_SAI2_RX_DATA 0x034 0x1A8 0x45C 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_08_FLEXIO1_FLEXIO20 0x034 0x1A8 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_08_GPIO2_IO08 0x034 0x1A8 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 0x038 0x1AC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_09_XBAR1_INOUT09 0x038 0x1AC 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_09_FLEXCAN2_RX 0x038 0x1AC 0x324 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_09_SAI2_RX_BCLK 0x038 0x1AC 0x458 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_09_FLEXIO1_FLEXIO21 0x038 0x1AC 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_09_GPIO2_IO09 0x038 0x1AC 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_10_SEMC_CAS 0x03C 0x1B0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_10_XBAR1_INOUT10 0x03C 0x1B0 0x4B0 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_10_LPI2C4_SDA 0x03C 0x1B0 0x398 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_10_SAI1_TX_SYNC 0x03C 0x1B0 0x450 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_10_LPSPI2_SCK 0x03C 0x1B0 0x3B0 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_10_GPIO2_IO10 0x03C 0x1B0 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_10_FLEXPWM2_PWMX00 0x03C 0x1B0 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_11_SEMC_RAS 0x040 0x1B4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_11_XBAR1_INOUT11 0x040 0x1B4 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_11_LPI2C4_SCL 0x040 0x1B4 0x394 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_11_SAI1_TX_BCLK 0x040 0x1B4 0x44C 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_11_LPSPI2_PCS0 0x040 0x1B4 0x3AC 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_11_GPIO2_IO11 0x040 0x1B4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_11_FLEXPWM2_PWMX01 0x040 0x1B4 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_12_SEMC_CS0 0x044 0x1B8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_12_XBAR1_INOUT12 0x044 0x1B8 0x4B4 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_12_LPUART6_TX 0x044 0x1B8 0x3F8 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_12_SAI1_TX_DATA00 0x044 0x1B8 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_12_LPSPI2_SDO 0x044 0x1B8 0x3B8 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_12_GPIO2_IO12 0x044 0x1B8 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_12_FLEXPWM2_PWMX02 0x044 0x1B8 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_13_SEMC_BA0 0x048 0x1BC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_13_XBAR1_INOUT13 0x048 0x1BC 0x4B8 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_13_LPUART6_RX 0x048 0x1BC 0x3F4 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_13_SAI1_RX_DATA00 0x048 0x1BC 0x438 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_13_LPSPI2_SDI 0x048 0x1BC 0x3B4 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_13_GPIO2_IO13 0x048 0x1BC 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_13_FLEXPWM2_PWMX03 0x048 0x1BC 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_13_CCM_PMIC_RDY 0x048 0x1BC 0x300 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_14_SEMC_BA1 0x04C 0x1C0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_14_XBAR1_INOUT14 0x04C 0x1C0 0x4A0 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_14_LPUART6_CTS_B 0x04C 0x1C0 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_14_SAI1_RX_BCLK 0x04C 0x1C0 0x434 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_14_LPSPI2_PCS1 0x04C 0x1C0 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_14_GPIO2_IO14 0x04C 0x1C0 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_14_FLEXCAN1_TX 0x04C 0x1C0 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_15_SEMC_ADDR10 0x050 0x1C4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_15_XBAR1_INOUT15 0x050 0x1C4 0x4A4 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_15_LPUART6_RTS_B 0x050 0x1C4 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_15_SAI1_RX_SYNC 0x050 0x1C4 0x448 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_15_WDOG1_B 0x050 0x1C4 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_15_GPIO2_IO15 0x050 0x1C4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_15_FLEXCAN1_RX 0x050 0x1C4 0x320 0x6 0x3 + +#define MXRT1020_IOMUXC_GPIO_EMC_16_SEMC_ADDR00 0x054 0x1C8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_16_MQS_RIGHT 0x054 0x1C8 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_16_SAI2_MCLK 0x054 0x1C8 0x454 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_16_GPIO2_IO16 0x054 0x1C8 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_16_SRC_BOOT_MODE00 0x054 0x1C8 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_17_SEMC_ADDR01 0x058 0x1CC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_17_MQS_LEFT 0x058 0x1CC 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_17_SAI3_MCLK 0x058 0x1CC 0x46C 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_17_GPIO2_IO17 0x058 0x1CC 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_17_SRC_BOOT_MODE01 0x058 0x1CC 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_18_SEMC_ADDR02 0x05C 0x1D0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_18_XBAR1_INOUT16 0x05C 0x1D0 0x4A8 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_18_LPI2C2_SDA 0x05C 0x1D0 0x388 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_18_SAI1_RX_SYNC 0x05C 0x1D0 0x448 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_18_FLEXIO1_FLEXIO22 0x05C 0x1D0 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_18_GPIO2_IO18 0x05C 0x1D0 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_18_SRC_BT_CFG00 0x05C 0x1D0 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_19_SEMC_ADDR03 0x060 0x1D4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_19_XBAR1_INOUT17 0x060 0x1D4 0x4AC 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_19_LPI2C2_SCL 0x060 0x1D4 0x384 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_19_SAI1_RX_BCLK 0x060 0x1D4 0x434 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_19_FLEXIO1_FLEXIO23 0x060 0x1D4 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_19_GPIO2_IO19 0x060 0x1D4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_19_SRC_BT_CFG01 0x060 0x1D4 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_20_SEMC_ADDR04 0x064 0x1D8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_20_FLEXPWM1_PWMA03 0x064 0x1D8 0x334 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_20_LPUART2_CTS_B 0x064 0x1D8 0x3CC 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_20_SAI1_MCLK 0x064 0x1D8 0x430 0x3 0x3 +#define MXRT1020_IOMUXC_GPIO_EMC_20_FLEXIO1_FLEXIO24 0x064 0x1D8 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_20_GPIO2_IO20 0x064 0x1D8 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_20_SRC_BT_CFG02 0x064 0x1D8 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_21_SEMC_ADDR05 0x068 0x1DC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_21_FLEXPWM1_PWMB03 0x068 0x1DC 0x344 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_21_LPUART2_RTS_B 0x068 0x1DC 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_21_SAI1_RX_DATA00 0x068 0x1DC 0x438 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_21_FLEXIO1_FLEXIO25 0x068 0x1DC 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_21_GPIO2_IO21 0x068 0x1DC 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_21_SRC_BT_CFG03 0x068 0x1DC 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_22_SEMC_ADDR06 0x06C 0x1E0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_22_FLEXPWM1_PWMA02 0x06C 0x1E0 0x330 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_22_LPUART2_TX 0x06C 0x1E0 0x3D4 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_22_SAI1_TX_DATA03 0x06C 0x1E0 0x43C 0x3 0x1 + +#define MXRT1020_IOMUXC_GPIO_EMC_22_FLEXIO1_FLEXIO26 0x06C 0x1E0 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_22_GPIO2_IO22 0x06C 0x1E0 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_22_SRC_BT_CFG04 0x06C 0x1E0 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_23_SEMC_ADDR07 0x070 0x1E4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_23_FLEXPWM1_PWMB02 0x070 0x1E4 0x340 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_23_LPUART2_RX 0x070 0x1E4 0x3D0 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_23_SAI1_TX_DATA02 0x070 0x1E4 0x440 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_23_FLEXIO1_FLEXIO27 0x070 0x1E4 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_23_GPIO2_IO23 0x070 0x1E4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_23_SRC_BT_CFG05 0x070 0x1E4 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_24_SEMC_ADDR08 0x074 0x1E8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_24_FLEXPWM1_PWMA01 0x074 0x1E8 0x32C 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_24_LPUART8_CTS_B 0x074 0x1E8 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_24_SAI1_TX_DATA01 0x074 0x1E8 0x444 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_24_FLEXIO1_FLEXIO28 0x074 0x1E8 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_24_GPIO2_IO24 0x074 0x1E8 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_24_SRC_BT_CFG06 0x074 0x1E8 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_25_SEMC_ADDR09 0x078 0x1EC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_25_FLEXPWM1_PWMB01 0x078 0x1EC 0x33C 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_25_LPUART8_RTS_B 0x078 0x1EC 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_25_SAI1_TX_DATA00 0x078 0x1EC 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_25_FLEXIO1_FLEXIO29 0x078 0x1EC 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_25_GPIO2_IO25 0x078 0x1EC 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_25_SRC_BT_CFG07 0x078 0x1EC 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_26_SEMC_ADDR11 0x07C 0x1F0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_26_FLEXPWM1_PWMA00 0x07C 0x1F0 0x328 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_26_LPUART8_TX 0x07C 0x1F0 0x408 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_26_SAI1_TX_BCLK 0x07C 0x1F0 0x44C 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_26_FLEXIO1_FLEXIO30 0x07C 0x1F0 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_26_GPIO2_IO26 0x07C 0x1F0 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_26_SRC_BT_CFG08 0x07C 0x1F0 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_27_SEMC_ADDR12 0x080 0x1F4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_27_FLEXPWM1_PWMB00 0x080 0x1F4 0x338 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_27_LPUART8_RX 0x080 0x1F4 0x404 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_27_SAI1_TX_SYNC 0x080 0x1F4 0x450 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_27_FLEXIO1_FLEXIO31 0x080 0x1F4 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_27_GPIO2_IO27 0x080 0x1F4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_27_SRC_BT_CFG09 0x080 0x1F4 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_28_SEMC_DQS 0x084 0x1F8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_28_FLEXPWM2_PWMA03 0x084 0x1F8 0x354 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_28_XBAR1_INOUT18 0x084 0x1F8 0x4BC 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_28_SAI3_MCLK 0x084 0x1F8 0x46C 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_28_EWM_OUT_B 0x084 0x1F8 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_28_GPIO2_IO28 0x084 0x1F8 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_28_GPT2_CAPTURE2 0x084 0x1F8 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_28_FLEXPWM1_PWMX00 0x084 0x1F8 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_29_SEMC_CKE 0x088 0x1FC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_29_FLEXPWM2_PWMB03 0x088 0x1FC 0x364 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_29_XBAR1_INOUT19 0x088 0x1FC 0x4C0 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_29_SAI3_RX_BCLK 0x088 0x1FC 0x470 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_29_WDOG2_RST_B_DEB 0x088 0x1FC 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_29_GPIO2_IO29 0x088 0x1FC 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_29_GPT2_COMPARE2 0x088 0x1FC 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_29_FLEXPWM1_PWMX01 0x088 0x1FC 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_30_SEMC_CLK 0x08C 0x200 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_30_FLEXPWM2_PWMA02 0x08C 0x200 0x350 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_30_LPUART4_CTS_B 0x08C 0x200 0x3E0 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_30_SAI3_RX_SYNC 0x08C 0x200 0x478 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_30_WDOG1_RST_B_DEB 0x08C 0x200 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_30_GPIO2_IO30 0x08C 0x200 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_30_GPT2_COMPARE3 0x08C 0x200 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_30_FLEXPWM1_PWMX02 0x08C 0x200 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_31_SEMC_DM01 0x090 0x204 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_31_FLEXPWM2_PWMB02 0x090 0x204 0x360 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_31_LPUART4_RTS_B 0x090 0x204 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_31_SAI3_RX_DATA 0x090 0x204 0x474 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_31_WDOG2_B 0x090 0x204 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_31_GPIO2_IO31 0x090 0x204 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_31_GPT2_CLK 0x090 0x204 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_31_FLEXPWM1_PWMX03 0x090 0x204 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_32_SEMC_DATA08 0x094 0x208 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_32_QTIMER1_TIMER0 0x094 0x208 0x410 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_32_LPUART4_TX 0x094 0x208 0x3E8 0x2 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_32_SAI3_TX_DATA 0x094 0x208 0x000 0x3 0x4 +#define MXRT1020_IOMUXC_GPIO_EMC_32_LPSPI4_SCK 0x094 0x208 0x3C0 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_32_GPIO3_IO00 0x094 0x208 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_32_REF_24M_OUT 0x094 0x208 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_33_SEMC_DATA09 0x098 0x20C 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_33_QTIMER1_TIMER1 0x098 0x20C 0x414 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_33_LPUART4_RX 0x098 0x20C 0x3E4 0x2 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_33_SAI3_TX_BCLK 0x098 0x20C 0x47C 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_33_LPSPI4_PCS0 0x098 0x20C 0x3BC 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_33_GPIO3_IO01 0x098 0x20C 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_34_SEMC_DATA10 0x09C 0x210 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_34_QTIMER1_TIMER2 0x09C 0x210 0x418 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_34_LPUART7_TX 0x09C 0x210 0x400 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_34_SAI3_TX_SYNC 0x09C 0x210 0x480 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_34_LPSPI4_SDO 0x09C 0x210 0x3C8 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_34_GPIO3_IO02 0x09C 0x210 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_34_ENET_CRS 0x09C 0x210 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_35_SEMC_DATA11 0x0A0 0x214 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_35_QTIMER1_TIMER3 0x0A0 0x214 0x41C 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_35_LPUART7_RX 0x0A0 0x214 0x3FC 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_35_USDHC2_WP 0x0A0 0x214 0x49C 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_35_LPSPI4_SDI 0x0A0 0x214 0x3C4 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_35_GPIO3_IO03 0x0A0 0x214 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_35_ENET_COL 0x0A0 0x214 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_36_SEMC_DATA12 0x0A4 0x218 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_36_FLEXPWM2_PWMA01 0x0A4 0x218 0x34C 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_36_LPUART5_CTS_B 0x0A4 0x218 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_36_CCM_PMIC_RDY 0x0A4 0x218 0x300 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_36_LPSPI4_PCS1 0x0A4 0x218 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_36_GPIO3_IO04 0x0A4 0x218 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_36_ENET_RX_CLK 0x0A4 0x218 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_36_USDHC1_WP 0x0A4 0x218 0x494 0x7 0x4 + +#define MXRT1020_IOMUXC_GPIO_EMC_37_SEMC_DATA13 0x0A8 0x21C 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_37_FLEXPWM2_PWMB01 0x0A8 0x21C 0x35C 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_37_LPUART5_RTS_B 0x0A8 0x21C 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_37_MQS_RIGHT 0x0A8 0x21C 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_37_LPSPI4_PCS2 0x0A8 0x21C 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_37_GPIO3_IO05 0x0A8 0x21C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_37_ENET_RDATA03 0x0A8 0x21C 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_37_USDHC1_VSELECT 0x0A8 0x21C 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_38_SEMC_DATA14 0x0AC 0x220 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_38_FLEXPWM2_PWMA00 0x0AC 0x220 0x348 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_38_LPUART5_TX 0x0AC 0x220 0x3F0 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_38_MQS_LEFT 0x0AC 0x220 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_38_LPSPI4_PCS3 0x0AC 0x220 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_38_GPIO3_IO06 0x0AC 0x220 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_38_ENET_RDATA02 0x0AC 0x220 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_38_USDHC1_CD_B 0x0AC 0x220 0x490 0x7 0x3 + +#define MXRT1020_IOMUXC_GPIO_EMC_39_SEMC_DATA15 0x0B0 0x224 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_39_FLEXPWM2_PWMB00 0x0B0 0x224 0x358 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_39_LPUART5_RX 0x0B0 0x224 0x3EC 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_39_USB_OTG1_OC 0x0B0 0x224 0x48C 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_39_WDOG1_B 0x0B0 0x224 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_39_GPIO3_IO07 0x0B0 0x224 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_39_ENET_TX_ER 0x0B0 0x224 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_39_GPT1_CLK 0x0B0 0x224 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_40_SEMC_CSX00 0x0B4 0x228 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_40_XBAR1_INOUT18 0x0B4 0x228 0x4BC 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_40_SPDIF_OUT 0x0B4 0x228 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_40_USB_OTG1_ID 0x0B4 0x228 0x2FC 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_40_ENET_MDIO 0x0B4 0x228 0x308 0x4 0x2 +#define MXRT1020_IOMUXC_GPIO_EMC_40_GPIO3_IO08 0x0B4 0x228 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_40_ENET_TDATA03 0x0B4 0x228 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_40_GPT1_COMPARE3 0x0B4 0x228 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_EMC_41_SEMC_READY 0x0B8 0x22C 0x484 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_41_XBAR1_INOUT19 0x0B8 0x22C 0x4C0 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_41_SPDIF_IN 0x0B8 0x22C 0x488 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_41_USB_OTG1_PWR 0x0B8 0x22C 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_41_ENET_MDC 0x0B8 0x22C 0x000 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_EMC_41_GPIO3_IO09 0x0B8 0x22C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_41_ENET_TDATA02 0x0B8 0x22C 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_EMC_41_GPT1_COMPARE2 0x0B8 0x22C 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_00_JTAG_TMS 0x0BC 0x230 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_00_GPIO1_IO00 0x0BC 0x230 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_00_GPT1_COMPARE1 0x0BC 0x230 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_01_JTAG_TCK 0x0C0 0x234 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_01_GPIO1_IO01 0x0C0 0x234 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_01_GPT1_CAPTURE2 0x0C0 0x234 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_02_JTAG_MOD 0x0C4 0x238 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0C4 0x238 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_02_GPT1_CAPTURE1 0x0C4 0x238 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_03_JTAG_TDI 0x0C8 0x23C 0x000 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_03_USDHC2_CD_B 0x0C8 0x23C 0x498 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_03_WDOG1_B 0x0C8 0x23C 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_03_SAI1_MCLK 0x0C8 0x23C 0x430 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_03_USDHC1_WP 0x0C8 0x23C 0x494 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_03_GPIO1_IO03 0x0C8 0x23C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_03_USB_OTG1_OC 0x0C8 0x23C 0x48C 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_03_CCM_PMIC_RDY 0x0C8 0x23C 0x300 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_04_JTAG_TDO 0x0CC 0x240 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_04_FLEXCAN1_TX 0x0CC 0x240 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_04_USDHC1_WP 0x0CC 0x240 0x494 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_04_QTIMER2_TIMER0 0x0CC 0x240 0x420 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_04_ENET_MDIO 0x0CC 0x240 0x308 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_04_GPIO1_IO04 0x0CC 0x240 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_04_USB_OTG1_PWR 0x0CC 0x240 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_04_EWM_OUT_B 0x0CC 0x240 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_05_JTAG_TRSTB 0x0D0 0x244 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_05_FLEXCAN1_RX 0x0D0 0x244 0x320 0x1 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B0_05_USDHC1_CD_B 0x0D0 0x244 0x490 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_05_QTIMER2_TIMER1 0x0D0 0x244 0x424 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_05_ENET_MDC 0x0D0 0x244 0x000 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_05_GPIO1_IO05 0x0D0 0x244 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_05_USB_OTG1_ID 0x0D0 0x244 0x2FC 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_05_NMI_GLUE_NMI 0x0D0 0x244 0x40C 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_06_PIT_TRIGGER00 0x0D4 0x248 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_06_MQS_RIGHT 0x0D4 0x248 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_06_LPUART1_TX 0x0D4 0x248 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_06_QTIMER2_TIMER2 0x0D4 0x248 0x428 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_06_FLEXPWM2_PWMA03 0x0D4 0x248 0x354 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_06_GPIO1_IO06 0x0D4 0x248 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_06_REF_32K_OUT 0x0D4 0x248 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_07_PIT_TRIGGER01 0x0D8 0x24C 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_07_MQS_LEFT 0x0D8 0x24C 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_07_LPUART1_RX 0x0D8 0x24C 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_07_QTIMER2_TIMER3 0x0D8 0x24C 0x42C 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_07_FLEXPWM2_PWMB03 0x0D8 0x24C 0x364 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_07_GPIO1_IO07 0x0D8 0x24C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_07_REF_24M_OUT 0x0D8 0x24C 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_08_ENET_TX_CLK 0x0DC 0x250 0x31C 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_08_LPI2C3_SCL 0x0DC 0x250 0x38C 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_08_LPUART1_CTS_B 0x0DC 0x250 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_08_KPP_COL00 0x0DC 0x250 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_08_ENET_REF_CLK1 0x0DC 0x250 0x304 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_08_GPIO1_IO08 0x0DC 0x250 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_08_ARM_CM7_TXEV 0x0DC 0x250 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_09_ENET_RDATA01 0x0E0 0x254 0x310 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_09_LPI2C3_SDA 0x0E0 0x254 0x390 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_09_LPUART1_RTS_B 0x0E0 0x254 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_09_KPP_ROW00 0x0E0 0x254 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 0x0E0 0x254 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_09_ARM_CM7_RXEV 0x0E0 0x254 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_10_ENET_RDATA00 0x0E4 0x258 0x30C 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_10_LPSPI1_SCK 0x0E4 0x258 0x3A0 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_10_LPUART5_TX 0x0E4 0x258 0x3F0 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_10_KPP_COL01 0x0E4 0x258 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_10_FLEXPWM2_PWMA02 0x0E4 0x258 0x350 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_10_GPIO1_IO10 0x0E4 0x258 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_10_ARM_CM7_TRACE_CLK 0x0E4 0x258 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_11_ENET_RX_EN 0x0E8 0x25C 0x314 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_11_LPSPI1_PCS0 0x0E8 0x25C 0x39C 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_11_LPUART5_RX 0x0E8 0x25C 0x3EC 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_11_KPP_ROW01 0x0E8 0x25C 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_11_FLEXPWM2_PWMB02 0x0E8 0x25C 0x360 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_11_GPIO1_IO11 0x0E8 0x25C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_11_ARM_CM7_TRACE_SWO 0x0E8 0x25C 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_12_ENET_RX_ER 0x0EC 0x260 0x318 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_12_LPSPI1_SDO 0x0EC 0x260 0x3A8 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_12_LPUART3_CTS_B 0x0EC 0x260 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_12_KPP_COL02 0x0EC 0x260 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_12_FLEXPWM2_PWMA01 0x0EC 0x260 0x34C 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_12_GPIO1_IO12 0x0EC 0x260 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_12_ARM_CM7_TRACE00 0x0EC 0x260 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_12_SNVS_HP_VIO_5_CTL 0x0EC 0x260 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_13_ENET_TX_EN 0x0F0 0x264 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_13_LPSPI1_SDI 0x0F0 0x264 0x3A4 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_13_LPUART3_RTS_B 0x0F0 0x264 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_13_KPP_ROW02 0x0F0 0x264 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_13_FLEXPWM2_PWMB01 0x0F0 0x264 0x35C 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_13_GPIO1_IO13 0x0F0 0x264 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_13_ARM_CM7_TRACE01 0x0F0 0x264 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_13_SNVS_HP_VIO_5_B 0x0F0 0x264 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_14_ENET_TDATA00 0x0F4 0x268 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX 0x0F4 0x268 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_14_LPUART3_TX 0x0F4 0x268 0x3DC 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_14_KPP_COL03 0x0F4 0x268 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_14_FLEXPWM2_PWMA00 0x0F4 0x268 0x348 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_14_GPIO1_IO14 0x0F4 0x268 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_14_ARM_CM7_TRACE02 0x0F4 0x268 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_14_WDOG1_ANY 0x0F4 0x268 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B0_15_ENET_TDATA01 0x0F8 0x26C 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX 0x0F8 0x26C 0x324 0x1 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B0_15_LPUART3_RX 0x0F8 0x26C 0x3D8 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B0_15_KPP_ROW03 0x0F8 0x26C 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_15_FLEXPWM2_PWMB00 0x0F8 0x26C 0x358 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_15_GPIO1_IO15 0x0F8 0x26C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B0_15_ARM_CM7_TRACE03 0x0F8 0x26C 0x000 0x6 0x2 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_00_SEMC_READY 0x0FC 0x270 0x484 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_00_FLEXSPI_A_DATA03 0x0FC 0x270 0x374 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_00_FLEXCAN2_TX 0x0FC 0x270 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_00_SAI1_MCLK 0x0FC 0x270 0x430 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B1_00_FLEXIO1_FLEXIO15 0x0FC 0x270 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_00_GPIO1_IO16 0x0FC 0x270 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_00_ENET_1588_EVENT2_OUT 0x0FC 0x270 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_00_KPP_COL04 0x0FC 0x270 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_01_SEMC_CSX00 0x100 0x274 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_01_FLEXSPI_A_SCLK 0x100 0x274 0x378 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_01_FLEXCAN2_RX 0x100 0x274 0x324 0x2 0x3 +#define MXRT1020_IOMUXC_GPIO_AD_B1_01_SAI1_TX_BCLK 0x100 0x274 0x44C 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B1_01_FLEXIO1_FLEXIO14 0x100 0x274 0x000 0x4 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B1_01_GPIO1_IO17 0x100 0x274 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_01_ENET_1588_EVENT2_IN 0x100 0x274 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_01_KPP_ROW04 0x100 0x274 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_02_SEMC_CSX01 0x104 0x278 0x000 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_02_FLEXSPI_A_DATA00 0x104 0x278 0x368 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_02_LPSPI4_SCK 0x104 0x278 0x3C0 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_02_SAI1_TX_SYNC 0x104 0x278 0x450 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B1_02_FLEXIO1_FLEXIO13 0x104 0x278 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_02_GPIO1_IO18 0x104 0x278 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_02_ENET_1588_EVENT3_OUT 0x104 0x278 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_02_KPP_COL05 0x104 0x278 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_03_SEMC_CSX02 0x108 0x27C 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_03_FLEXSPI_A_DATA02 0x108 0x27C 0x370 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_03_LPSPI4_PCS0 0x108 0x27C 0x3BC 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_03_SAI1_TX_DATA00 0x108 0x27C 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_03_FLEXIO1_FLEXIO12 0x108 0x27C 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_03_GPIO1_IO19 0x108 0x27C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_03_ENET_1588_EVENT3_IN 0x108 0x27C 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_03_KPP_ROW05 0x108 0x27C 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_04_SEMC_CSX03 0x10C 0x280 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_04_FLEXSPI_A_DATA01 0x10C 0x280 0x36C 0x1 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_04_LPSPI4_SDO 0x10C 0x280 0x3C8 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_04_SAI1_RX_SYNC 0x10C 0x280 0x448 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_04_FLEXIO1_FLEXIO11 0x10C 0x280 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_04_GPIO1_IO20 0x10C 0x280 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_04_LPSPI1_PCS1 0x10C 0x280 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_04_KPP_COL06 0x10C 0x280 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_05_USDHC1_WP 0x110 0x284 0x494 0x0 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B1_05_FLEXSPI_A_SS0_B 0x110 0x284 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_05_LPSPI4_SDI 0x110 0x284 0x3C4 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_05_SAI1_RX_DATA00 0x110 0x284 0x438 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_05_FLEXIO1_FLEXIO10 0x110 0x284 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_05_GPIO1_IO21 0x110 0x284 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_05_LPSPI1_PCS2 0x110 0x284 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_05_KPP_ROW06 0x110 0x284 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_06_USDHC1_RESET_B 0x114 0x288 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_06_FLEXPWM1_PWMA00 0x114 0x288 0x328 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_06_LPUART2_CTS_B 0x114 0x288 0x3CC 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_06_SAI1_RX_BCLK 0x114 0x288 0x434 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_06_FLEXIO1_FLEXIO09 0x114 0x288 0x000 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_06_GPIO1_IO22 0x114 0x288 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_06_LPSPI1_PCS3 0x114 0x288 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_06_KPP_COL07 0x114 0x288 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_07_USDHC1_VSELECT 0x118 0x28C 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_07_FLEXPWM1_PWMB00 0x118 0x28C 0x338 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_07_LPUART2_RTS_B 0x118 0x28C 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_07_SAI1_TX_DATA01 0x118 0x28C 0x444 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_07_FLEXIO1_FLEXIO08 0x118 0x28C 0x000 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_07_GPIO1_IO23 0x118 0x28C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_07_LPSPI3_PCS3 0x118 0x28C 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_07_KPP_ROW07 0x118 0x28C 0x000 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_08_LPI2C2_SCL 0x11C 0x290 0x384 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_08_FLEXPWM1_PWMA01 0x11C 0x290 0x32C 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_08_LPUART2_TX 0x11C 0x290 0x3D4 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_08_SAI1_TX_DATA02 0x11C 0x290 0x440 0x3 0x3 +#define MXRT1020_IOMUXC_GPIO_AD_B1_08_FLEXIO1_FLEXIO07 0x11C 0x290 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_08_GPIO1_IO24 0x11C 0x290 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_08_LPSPI3_PCS2 0x11C 0x290 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_08_XBAR1_INOUT12 0x11C 0x290 0x4B4 0x7 0x1 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_09_LPI2C2_SDA 0x120 0x294 0x388 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_09_FLEXPWM1_PWMB01 0x120 0x294 0x33C 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_09_LPUART2_RX 0x120 0x294 0x3D0 0x2 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B1_09_SAI1_TX_DATA03 0x120 0x294 0x43C 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_09_FLEXIO1_FLEXIO26 0x120 0x294 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_09_GPIO1_IO25 0x120 0x294 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_09_LPSPI3_PCS1 0x120 0x294 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_09_XBAR1_INOUT13 0x120 0x294 0x4B8 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_10_USB_OTG1_PWR 0x124 0x298 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_10_FLEXPWM1_PWMA02 0x124 0x298 0x330 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_10_LPUART4_TX 0x124 0x298 0x3E8 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_10_USDHC1_CD_B 0x124 0x298 0x490 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B1_10_FLEXIO1_FLEXIO05 0x124 0x298 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_10_GPIO1_IO26 0x124 0x298 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_10_GPT2_CAPTURE1 0x124 0x298 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_11_USB_OTG1_ID 0x128 0x29C 0x2FC 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_11_FLEXPWM1_PWMB02 0x128 0x29C 0x340 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_11_LPUART4_RX 0x128 0x29C 0x3E4 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_11_USDHC1_WP 0x128 0x29C 0x494 0x3 0x3 +#define MXRT1020_IOMUXC_GPIO_AD_B1_11_FLEXIO1_FLEXIO04 0x128 0x29C 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_11_GPIO1_IO27 0x128 0x29C 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_11_GPT2_COMPARE1 0x128 0x29C 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_12_USB_OTG1_OC 0x12C 0x2A0 0x48C 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_12_ACMP1_OUT 0x12C 0x2A0 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_12_LPSPI3_SCK 0x12C 0x2A0 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_12_USDHC2_CD_B 0x12C 0x2A0 0x498 0x3 0x2 +#define MXRT1020_IOMUXC_GPIO_AD_B1_12_FLEXIO1_FLEXIO03 0x12C 0x2A0 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_12_GPIO1_IO28 0x12C 0x2A0 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_12_FLEXPWM1_PWMA03 0x12C 0x2A0 0x334 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_13_LPI2C1_HREQ 0x130 0x2A4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_13_ACMP2_OUT 0x130 0x2A4 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_13_LPSPI3_PCS0 0x130 0x2A4 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_13_USDHC2_WP 0x130 0x2A4 0x49C 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_13_FLEXIO1_FLEXIO02 0x130 0x2A4 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_13_GPIO1_IO29 0x130 0x2A4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_13_FLEXPWM1_PWMB03 0x130 0x2A4 0x344 0x6 0x1 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_14_LPI2C1_SCL 0x134 0x2A8 0x37C 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_14_ACMP3_OUT 0x134 0x2A8 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO 0x134 0x2A8 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_14_ENET_1588_EVENT0_OUT 0x134 0x2A8 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_14_FLEXIO1_FLEXIO01 0x134 0x2A8 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_14_GPIO1_IO30 0x134 0x2A8 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_AD_B1_15_LPI2C1_SDA 0x138 0x2AC 0x380 0x0 0x1 +#define MXRT1020_IOMUXC_GPIO_AD_B1_15_ACMP4_OUT 0x138 0x2AC 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_15_LPSPI3_SDI 0x138 0x2AC 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_15_ENET_1588_EVENT0_IN 0x138 0x2AC 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_15_FLEXIO1_FLEXIO00 0x138 0x2AC 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_AD_B1_15_GPIO1_IO31 0x138 0x2AC 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2 0x13C 0x2B0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_00_QTIMER1_TIMER0 0x13C 0x2B0 0x410 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_00_SAI1_MCLK 0x13C 0x2B0 0x430 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_00_SAI2_MCLK 0x13C 0x2B0 0x454 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_00_LPI2C3_SCL 0x13C 0x2B0 0x38C 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_00_GPIO3_IO13 0x13C 0x2B0 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_00_FLEXSPI_A_SS1_B 0x13C 0x2B0 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_00_XBAR1_INOUT14 0x13C 0x2B0 0x4A0 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3 0x140 0x2B4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_01_QTIMER1_TIMER1 0x140 0x2B4 0x414 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_01_REF_24M_OUT 0x140 0x2B4 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_01_SAI2_RX_SYNC 0x140 0x2B4 0x460 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_01_LPI2C3_SDA 0x140 0x2B4 0x390 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_01_GPIO3_IO14 0x140 0x2B4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_01_FLEXSPI_B_SS1_B 0x140 0x2B4 0x000 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_01_XBAR1_INOUT15 0x140 0x2B4 0x4A4 0x7 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B0_02_USDHC1_CMD 0x144 0x2B8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_02_QTIMER1_TIMER2 0x144 0x2B8 0x418 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_02_LPUART7_CTS_B 0x144 0x2B8 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_02_SAI2_RX_BCLK 0x144 0x2B8 0x458 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_02_LPSPI1_SCK 0x144 0x2B8 0x3A0 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_02_GPIO3_IO15 0x144 0x2B8 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_02_ENET_MDIO 0x144 0x2B8 0x308 0x6 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_02_XBAR1_INOUT16 0x144 0x2B8 0x4A8 0x7 0x1 + +#define MXRT1020_IOMUXC_GPIO_SD_B0_03_USDHC1_CLK 0x148 0x2BC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_03_QTIMER1_TIMER3 0x148 0x2BC 0x41C 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_03_LPUART7_RTS_B 0x148 0x2BC 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_03_SAI2_RX_DATA 0x148 0x2BC 0x45C 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_03_LPSPI1_PCS0 0x148 0x2BC 0x39C 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_03_GPIO3_IO16 0x148 0x2BC 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_03_ENET_MDC 0x148 0x2BC 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0 0x14C 0x2C0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_04_FLEXCAN2_TX 0x14C 0x2C0 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_04_LPUART7_TX 0x14C 0x2C0 0x400 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_04_SAI2_TX_DATA 0x14C 0x2C0 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_04_LPSPI1_SDO 0x14C 0x2C0 0x3A8 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_04_GPIO3_IO17 0x14C 0x2C0 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_04_FLEXSPI_B_SS0_B 0x14C 0x2C0 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1 0x150 0x2C4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_05_FLEXCAN2_RX 0x150 0x2C4 0x324 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_05_LPUART7_RX 0x150 0x2C4 0x3FC 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_05_SAI2_TX_BCLK 0x150 0x2C4 0x464 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_05_LPSPI1_SDI 0x150 0x2C4 0x3A4 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_05_GPIO3_IO18 0x150 0x2C4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_05_FLEXSPI_B_DQS 0x150 0x2C4 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B0_06_USDHC1_CD_B 0x154 0x2C8 0x490 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_06_USDHC1_RESET_B 0x154 0x2C8 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_06_REF_32K_OUT 0x154 0x2C8 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_06_SAI2_TX_SYNC 0x154 0x2C8 0x468 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_06_WDOG1_B 0x154 0x2C8 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_06_GPIO3_IO19 0x154 0x2C8 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B0_06_XBAR1_INOUT17 0x154 0x2C8 0x4AC 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_00_USDHC2_DATA2 0x158 0x2CC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA03 0x158 0x2CC 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_00_LPUART6_TX 0x158 0x2CC 0x3F8 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_SD_B1_00_XBAR1_INOUT10 0x158 0x2CC 0x4B0 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_SD_B1_00_FLEXCAN1_TX 0x158 0x2CC 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_00_GPIO3_IO20 0x158 0x2CC 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_01_USDHC2_DATA3 0x15C 0x2D0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_SCLK 0x15C 0x2D0 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_01_LPUART6_RX 0x15C 0x2D0 0x3F4 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_SD_B1_01_FLEXSPI_A_SS1_B 0x15C 0x2D0 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_01_FLEXCAN1_RX 0x15C 0x2D0 0x320 0x4 0x1 +#define MXRT1020_IOMUXC_GPIO_SD_B1_01_GPIO3_IO21 0x15C 0x2D0 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_02_USDHC2_CMD 0x160 0x2D4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA00 0x160 0x2D4 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_02_LPUART8_TX 0x160 0x2D4 0x408 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_02_LPI2C4_SCL 0x160 0x2D4 0x394 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_02_ENET_1588_EVENT1_OUT 0x160 0x2D4 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_02_GPIO3_IO22 0x160 0x2D4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_02_CCM_CLKO1 0x160 0x2D4 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_03_USDHC2_CLK 0x164 0x2D8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA02 0x164 0x2D8 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_03_LPUART8_RX 0x164 0x2D8 0x404 0x2 0x1 +#define MXRT1020_IOMUXC_GPIO_SD_B1_03_LPI2C4_SDA 0x164 0x2D8 0x398 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_SD_B1_03_ENET_1588_EVENT1_IN 0x164 0x2D8 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_03_GPIO3_IO23 0x164 0x2D8 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_03_CCM_CLKO2 0x164 0x2D8 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_04_USDHC2_DATA0 0x168 0x2DC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_DATA01 0x168 0x2DC 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_04_ENET_TX_CLK 0x168 0x2DC 0x31C 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_04_ENET_REF_CLK1 0x168 0x2DC 0x304 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_04_EWM_OUT_B 0x168 0x2DC 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_04_GPIO3_IO24 0x168 0x2DC 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_04_CCM_WAIT 0x168 0x2DC 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_05_USDHC2_DATA1 0x16C 0x2E0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS 0x16C 0x2E0 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_05_ENET_RDATA01 0x16C 0x2E0 0x310 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_05_SAI3_MCLK 0x16C 0x2E0 0x46C 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_05_FLEXSPI_B_SS0_B 0x16C 0x2E0 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_05_GPIO3_IO25 0x16C 0x2E0 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_05_CCM_PMIC_RDY 0x16C 0x2E0 0x300 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_06_USDHC2_CD_B 0x170 0x2E4 0x498 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_DATA03 0x170 0x2E4 0x374 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_06_ENET_RDATA00 0x170 0x2E4 0x30C 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_06_SAI3_TX_BCLK 0x170 0x2E4 0x47C 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_06_LPSPI2_PCS0 0x170 0x2E4 0x3AC 0x4 0x2 +#define MXRT1020_IOMUXC_GPIO_SD_B1_06_GPIO3_IO26 0x170 0x2E4 0x000 0x5 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_06_CCM_STOP 0x170 0x2E4 0x000 0x6 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_07_USDHC2_RESET_B 0x174 0x2E8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK 0x174 0x2E8 0x378 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_07_ENET_RX_EN 0x174 0x2E8 0x314 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_07_SAI3_TX_SYNC 0x174 0x2E8 0x480 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_07_LPSPI2_SCK 0x174 0x2E8 0x3B0 0x4 0x2 +#define MXRT1020_IOMUXC_GPIO_SD_B1_07_GPIO3_IO27 0x174 0x2E8 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_08_USDHC2_DATA4 0x178 0x2EC 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00 0x178 0x2EC 0x368 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_08_ENET_RX_ER 0x178 0x2EC 0x318 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_08_SAI3_TX_DATA 0x178 0x2EC 0x000 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_08_LPSPI2_SDO 0x178 0x2EC 0x3B8 0x4 0x2 +#define MXRT1020_IOMUXC_GPIO_SD_B1_08_GPIO3_IO28 0x178 0x2EC 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_09_USDHC2_DATA5 0x17C 0x2F0 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA02 0x17C 0x2F0 0x370 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_09_ENET_TX_EN 0x17C 0x2F0 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_09_SAI3_RX_BCLK 0x17C 0x2F0 0x470 0x3 0x1 +#define MXRT1020_IOMUXC_GPIO_SD_B1_09_LPSPI2_SDI 0x17C 0x2F0 0x3B4 0x4 0x2 +#define MXRT1020_IOMUXC_GPIO_SD_B1_09_GPIO3_IO29 0x17C 0x2F0 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_10_USDHC2_DATA6 0x180 0x2F4 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA01 0x180 0x2F4 0x36C 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_10_ENET_TDATA00 0x180 0x2F4 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_10_SAI3_RX_SYNC 0x180 0x2F4 0x478 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_10_LPSPI2_PCS2 0x180 0x2F4 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_10_GPIO3_IO30 0x180 0x2F4 0x000 0x5 0x0 + +#define MXRT1020_IOMUXC_GPIO_SD_B1_11_USDHC2_DATA7 0x184 0x2F8 0x000 0x0 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_SS0_B 0x184 0x2F8 0x000 0x1 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_11_ENET_TDATA01 0x184 0x2F8 0x000 0x2 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_11_SAI3_RX_DATA 0x184 0x2F8 0x474 0x3 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_11_LPSPI2_PCS3 0x184 0x2F8 0x000 0x4 0x0 +#define MXRT1020_IOMUXC_GPIO_SD_B1_11_GPIO3_IO31 0x184 0x2F8 0x000 0x5 0x0 + +#endif /* _DT_BINDINGS_PINCTRL_IMXRT1020_PINFUNC_H */ |