diff options
-rw-r--r-- | board/freescale/imx8mm_evk/README | 2 | ||||
-rw-r--r-- | board/freescale/imx8mn_evk/README | 2 | ||||
-rw-r--r-- | board/freescale/imx8mp_evk/README | 2 | ||||
-rw-r--r-- | board/freescale/imx8mq_evk/README | 2 | ||||
-rw-r--r-- | board/freescale/imx8qxp_mek/README | 2 | ||||
-rw-r--r-- | board/freescale/imxrt1020-evk/README | 4 | ||||
-rw-r--r-- | board/freescale/imxrt1050-evk/README | 4 | ||||
-rw-r--r-- | board/freescale/mx6sabreauto/README | 8 | ||||
-rw-r--r-- | board/freescale/mx6sabresd/README | 12 | ||||
-rw-r--r-- | board/freescale/mx6ul_14x14_evk/README | 4 | ||||
-rw-r--r-- | board/freescale/mx6ullevk/README | 2 |
11 files changed, 22 insertions, 22 deletions
diff --git a/board/freescale/imx8mm_evk/README b/board/freescale/imx8mm_evk/README index fa3f079f31..3307711d5d 100644 --- a/board/freescale/imx8mm_evk/README +++ b/board/freescale/imx8mm_evk/README @@ -30,7 +30,7 @@ $ export ATF_LOAD_ADDR=0x920000 $ make flash.bin Burn the flash.bin to MicroSD card offset 33KB -$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 +$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc Boot ==== diff --git a/board/freescale/imx8mn_evk/README b/board/freescale/imx8mn_evk/README index ff3d15c02b..ec007afb25 100644 --- a/board/freescale/imx8mn_evk/README +++ b/board/freescale/imx8mn_evk/README @@ -30,7 +30,7 @@ $ export ATF_LOAD_ADDR=0x960000 $ make flash.bin Burn the flash.bin to MicroSD card offset 32KB -$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 +$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc Boot ==== diff --git a/board/freescale/imx8mp_evk/README b/board/freescale/imx8mp_evk/README index 7dd3a9352a..3c64979be9 100644 --- a/board/freescale/imx8mp_evk/README +++ b/board/freescale/imx8mp_evk/README @@ -33,7 +33,7 @@ $ export ATF_LOAD_ADDR=0x960000 $ make flash.bin Burn the flash.bin to the MicroSD card at offset 32KB -$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32; sync +$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync Boot ==== diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README index 859f852255..2689459b9f 100644 --- a/board/freescale/imx8mq_evk/README +++ b/board/freescale/imx8mq_evk/README @@ -30,7 +30,7 @@ $ make imx8mq_evk_defconfig $ make flash.bin Burn the flash.bin to MicroSD card offset 33KB -$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 +$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc Boot ==== diff --git a/board/freescale/imx8qxp_mek/README b/board/freescale/imx8qxp_mek/README index 6e4eb5996b..6f99d0e13e 100644 --- a/board/freescale/imx8qxp_mek/README +++ b/board/freescale/imx8qxp_mek/README @@ -43,7 +43,7 @@ Flash the binary into the SD card Burn the flash.bin binary to SD card offset 32KB: -$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 +$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc Boot ==== diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README index abee7ca5f3..9bc5bc00bc 100644 --- a/board/freescale/imxrt1020-evk/README +++ b/board/freescale/imxrt1020-evk/README @@ -11,11 +11,11 @@ This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: -sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync +sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync - Flash the u-boot.img image into the micro SD card: -sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync +sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync - Jumper settings: diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README index a7e68fa9b3..f321300246 100644 --- a/board/freescale/imxrt1050-evk/README +++ b/board/freescale/imxrt1050-evk/README @@ -11,11 +11,11 @@ This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: -sudo dd if=SPL of=/dev/sdX bs=1k seek=1; sync +sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync - Flash the u-boot.img image into the micro SD card: -sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128; sync +sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync - Jumper settings: diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README index 4c0fda1a2d..710026a05e 100644 --- a/board/freescale/mx6sabreauto/README +++ b/board/freescale/mx6sabreauto/README @@ -13,11 +13,11 @@ This will generate the SPL and u-boot-dtb.img binaries. - Flash the SPL binary into the SD card: -$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync +$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync - Flash the u-boot-dtb.img binary into the SD card: -$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync Booting via Falcon mode ----------------------- @@ -36,11 +36,11 @@ This will generate the SPL image called SPL and the u-boot-dtb.img. - Flash the SPL image into the SD card: -$ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync +$ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 conv=notrunc && sync - Flash the u-boot-dtb.img image into the SD card: -$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 && sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdb bs=1K seek=69 conv=notrunc && sync Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there: diff --git a/board/freescale/mx6sabresd/README b/board/freescale/mx6sabresd/README index 4ea4454b9f..974b0be175 100644 --- a/board/freescale/mx6sabresd/README +++ b/board/freescale/mx6sabresd/README @@ -25,11 +25,11 @@ This will generate the SPL and u-boot-dtb.img binaries. - Flash the SPL binary into the SD card: -$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync +$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync - Flash the u-boot-dtb.img binary into the SD card: -$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync 2. Booting from eMMC @@ -53,8 +53,8 @@ Mount the eMMC in the host PC: - Flash SPL and u-boot-dtb.img binaries into the eMMC: -$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync -$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 && sync +$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 conv=notrunc && sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 conv=notrunc && sync Set SW6 to eMMC 8-bit boot: 11010110 @@ -69,11 +69,11 @@ This will generate the SPL image called SPL and the u-boot-dtb.img. - Flash the SPL image into the SD card: -$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none && sync +$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 oflag=sync status=none conv=notrunc && sync - Flash the u-boot-dtb.img image into the SD card: -$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none && sync +$ sudo dd if=u-boot-dtb.img of=/dev/sdX bs=1K seek=69 oflag=sync status=none conv=notrunc && sync Create a partition for root file system and extract it there: diff --git a/board/freescale/mx6ul_14x14_evk/README b/board/freescale/mx6ul_14x14_evk/README index e101abe48c..70eb86efba 100644 --- a/board/freescale/mx6ul_14x14_evk/README +++ b/board/freescale/mx6ul_14x14_evk/README @@ -14,11 +14,11 @@ This will generate the SPL image called SPL and the u-boot.img. - Flash the SPL image into the micro SD card: -sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1 conv=notrunc; sync - Flash the u-boot.img image into the micro SD card: -sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync +sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69 conv=notrunc; sync - Jumper settings: diff --git a/board/freescale/mx6ullevk/README b/board/freescale/mx6ullevk/README index d5c8770863..47a35f61a2 100644 --- a/board/freescale/mx6ullevk/README +++ b/board/freescale/mx6ullevk/README @@ -15,7 +15,7 @@ This generates the u-boot-dtb.imx image in the current directory. - Flash the u-boot-dtb.imx image into the micro SD card: -$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 && sync +$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync - Jumper settings: |