summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS14
-rw-r--r--README4
-rw-r--r--arch/arm/dts/Makefile5
-rw-r--r--arch/arm/dts/fsl-imx8dx.dtsi64
-rw-r--r--arch/arm/dts/imx28-pinfunc.h506
-rw-r--r--arch/arm/dts/imx28-u-boot.dtsi28
-rw-r--r--arch/arm/dts/imx28.dtsi1330
-rw-r--r--arch/arm/dts/imx53-m53menlo-u-boot.dtsi5
-rw-r--r--arch/arm/dts/imx6dl-dhcom-pdk2.dts14
-rw-r--r--arch/arm/dts/imx6q-dhcom-pdk2.dts141
-rw-r--r--arch/arm/dts/imx6q-display5-u-boot.dtsi44
-rw-r--r--arch/arm/dts/imx6q-display5.dts352
-rw-r--r--arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi142
-rw-r--r--arch/arm/dts/imx6qdl-dhcom.dtsi (renamed from arch/arm/dts/imx6q-dhcom-som.dtsi)3
-rw-r--r--arch/arm/dts/imx7d-pico.dtsi2
-rw-r--r--arch/arm/dts/mxs-pinfunc.h31
-rw-r--r--arch/arm/include/asm/arch-imx8/sci/sci.h2
-rw-r--r--arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h1
-rw-r--r--arch/arm/include/asm/arch-imx8/sys_proto.h3
-rw-r--r--arch/arm/include/asm/mach-imx/imx-nandbcb.h111
-rw-r--r--arch/arm/mach-imx/Kconfig11
-rw-r--r--arch/arm/mach-imx/Makefile1
-rw-r--r--arch/arm/mach-imx/cmd_nandbcb.c369
-rw-r--r--arch/arm/mach-imx/cpu.c6
-rw-r--r--arch/arm/mach-imx/imx8/Makefile2
-rw-r--r--arch/arm/mach-imx/imx8/misc.c39
-rw-r--r--arch/arm/mach-imx/mx6/soc.c5
-rw-r--r--arch/arm/mach-imx/spl.c8
-rw-r--r--arch/sandbox/dts/test.dts10
-rw-r--r--board/armadeus/opos6uldev/board.c21
-rw-r--r--board/dhelectronics/dh_imx6/dh_imx6.c147
-rw-r--r--board/dhelectronics/dh_imx6/dh_imx6_spl.c9
-rw-r--r--board/engicam/common/board.c2
-rw-r--r--board/freescale/imx8qm_mek/imx8qm_mek.c29
-rw-r--r--board/freescale/imx8qxp_mek/imx8qxp_mek.c29
-rw-r--r--board/freescale/mx6sxsabresd/imximage.cfg7
-rw-r--r--board/freescale/mx7ulp_evk/imximage.cfg17
-rw-r--r--board/freescale/mx7ulp_evk/plugin.S23
-rw-r--r--board/liebherr/display5/common.c2
-rw-r--r--board/liebherr/display5/display5.c9
-rw-r--r--board/logicpd/imx6/imx6logic.c12
-rw-r--r--board/technexion/pico-imx7d/pico-imx7d.c13
-rw-r--r--board/toradex/apalis-imx8/apalis-imx8.c30
-rw-r--r--board/toradex/colibri-imx8x/colibri-imx8x.c29
-rw-r--r--board/toradex/common/tdx-cfg-block.c66
-rw-r--r--cmd/Kconfig12
-rw-r--r--cmd/eeprom.c2
-rw-r--r--common/board_r.c2
-rw-r--r--common/spl/Kconfig1
-rw-r--r--common/spl/spl.c2
-rw-r--r--configs/apalis_imx6_defconfig2
-rw-r--r--configs/aristainetos2_defconfig1
-rw-r--r--configs/aristainetos2b_defconfig1
-rw-r--r--configs/aristainetos_defconfig1
-rw-r--r--configs/colibri-imx6ull_defconfig1
-rw-r--r--configs/colibri_imx6_defconfig2
-rw-r--r--configs/colibri_imx7_emmc_defconfig5
-rw-r--r--configs/dh_imx6_defconfig10
-rw-r--r--configs/display5_defconfig3
-rw-r--r--configs/dms-ba16-1g_defconfig1
-rw-r--r--configs/dms-ba16_defconfig1
-rw-r--r--configs/ge_bx50v3_defconfig1
-rw-r--r--configs/imx6q_logic_defconfig6
-rw-r--r--configs/imx6qdl_icore_mmc_defconfig1
-rw-r--r--configs/imx6qdl_icore_nand_defconfig1
-rw-r--r--configs/imx8qxp_mek_defconfig2
-rw-r--r--configs/kp_imx53_defconfig2
-rw-r--r--configs/m53menlo_defconfig2
-rw-r--r--configs/mccmon6_nor_defconfig2
-rw-r--r--configs/mccmon6_sd_defconfig2
-rw-r--r--configs/mt7629_rfb_defconfig2
-rw-r--r--configs/mx53ppd_defconfig1
-rw-r--r--configs/pico-hobbit-imx7d_defconfig1
-rw-r--r--configs/pico-imx7d_bl33_defconfig1
-rw-r--r--configs/pico-imx7d_defconfig1
-rw-r--r--configs/pico-pi-imx7d_defconfig1
-rw-r--r--configs/sandbox_defconfig1
-rw-r--r--configs/sandbox_flattree_defconfig1
-rw-r--r--configs/vining_2000_defconfig1
-rw-r--r--configs/warp7_bl33_defconfig9
-rw-r--r--doc/README.falcon2
-rw-r--r--doc/imx/clk/ccf.txt101
-rw-r--r--doc/imx/common/imx6.txt74
-rw-r--r--drivers/clk/Kconfig22
-rw-r--r--drivers/clk/Makefile3
-rw-r--r--drivers/clk/clk-divider.c155
-rw-r--r--drivers/clk/clk-fixed-factor.c80
-rw-r--r--drivers/clk/clk-mux.c172
-rw-r--r--drivers/clk/clk-uclass.c60
-rw-r--r--drivers/clk/clk.c57
-rw-r--r--drivers/clk/clk_fixed_factor.c3
-rw-r--r--drivers/clk/clk_fixed_rate.c8
-rw-r--r--drivers/clk/clk_sandbox_ccf.c185
-rw-r--r--drivers/clk/imx/Kconfig16
-rw-r--r--drivers/clk/imx/Makefile2
-rw-r--r--drivers/clk/imx/clk-gate2.c103
-rw-r--r--drivers/clk/imx/clk-imx6q.c179
-rw-r--r--drivers/clk/imx/clk-pfd.c90
-rw-r--r--drivers/clk/imx/clk-pllv3.c82
-rw-r--r--drivers/clk/imx/clk.h69
-rw-r--r--drivers/gpio/mxc_gpio.c2
-rw-r--r--drivers/gpio/mxs_gpio.c148
-rw-r--r--drivers/misc/imx8/scu_api.c28
-rw-r--r--drivers/mmc/mmc_spi.c4
-rw-r--r--drivers/mtd/nand/raw/mxs_nand.c2
-rw-r--r--drivers/mtd/nand/raw/mxs_nand_dt.c2
-rw-r--r--drivers/mtd/nand/raw/mxs_nand_spl.c2
-rw-r--r--drivers/mtd/spi/spi-nor-ids.c4
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/net/fec_mxc.c1
-rw-r--r--drivers/pinctrl/nxp/Kconfig10
-rw-r--r--drivers/pinctrl/nxp/Makefile1
-rw-r--r--drivers/pinctrl/nxp/pinctrl-mxs.c190
-rw-r--r--drivers/pinctrl/nxp/pinctrl-mxs.h61
-rw-r--r--drivers/power/pmic/bd71837.c32
-rw-r--r--drivers/power/regulator/Kconfig17
-rw-r--r--drivers/power/regulator/Makefile1
-rw-r--r--drivers/power/regulator/bd71837.c468
-rw-r--r--drivers/pwm/Kconfig5
-rw-r--r--drivers/pwm/pwm-imx.c110
-rw-r--r--drivers/serial/serial_mxc.c4
-rw-r--r--drivers/spi/Kconfig21
-rw-r--r--drivers/spi/Makefile3
-rw-r--r--drivers/spi/fsl_qspi.c18
-rw-r--r--drivers/spi/mtk_qspi.c359
-rw-r--r--drivers/spi/mtk_snfi_spi.c318
-rw-r--r--drivers/spi/mxs_spi.c400
-rw-r--r--drivers/spi/spi-mem.c8
-rw-r--r--drivers/spi/spi-sifive.c370
-rw-r--r--drivers/thermal/Kconfig9
-rw-r--r--drivers/thermal/Makefile1
-rw-r--r--drivers/thermal/imx_scu_thermal.c203
-rw-r--r--drivers/watchdog/Kconfig9
-rw-r--r--drivers/watchdog/Makefile2
-rw-r--r--drivers/watchdog/imx_watchdog.c119
-rw-r--r--include/asm-generic/global_data.h2
-rw-r--r--include/clk.h37
-rw-r--r--include/configs/advantech_dms-ba16.h1
-rw-r--r--include/configs/apalis_imx6.h22
-rw-r--r--include/configs/aristainetos-common.h1
-rw-r--r--include/configs/aristainetos2.h3
-rw-r--r--include/configs/aristainetos2b.h3
-rw-r--r--include/configs/colibri-imx6ull.h2
-rw-r--r--include/configs/colibri_imx6.h20
-rw-r--r--include/configs/colibri_imx7.h44
-rw-r--r--include/configs/dh_imx6.h8
-rw-r--r--include/configs/display5.h5
-rw-r--r--include/configs/ge_bx50v3.h1
-rw-r--r--include/configs/m53menlo.h5
-rw-r--r--include/configs/mccmon6.h8
-rw-r--r--include/configs/mx53ppd.h1
-rw-r--r--include/configs/vining_2000.h1
-rw-r--r--include/configs/warp7.h20
-rw-r--r--include/linux/clk-provider.h132
-rw-r--r--include/mxs_nand.h (renamed from drivers/mtd/nand/raw/mxs_nand.h)0
-rw-r--r--include/power/bd71837.h147
-rw-r--r--include/sandbox-clk.h76
-rw-r--r--include/wdt.h2
-rw-r--r--lib/optee/Kconfig2
-rw-r--r--scripts/config_whitelist.txt1
-rw-r--r--test/dm/Makefile2
-rw-r--r--test/dm/clk_ccf.c62
162 files changed, 7640 insertions, 1148 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index a72ccd0b58..4285d56626 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -205,7 +205,7 @@ F: drivers/mmc/mtk-sd.c
F: drivers/pinctrl/mediatek/
F: drivers/power/domain/mtk-power-domain.c
F: drivers/ram/mediatek/
-F: drivers/spi/mtk_qspi.c
+F: drivers/spi/mtk_snfi_spi.c
F: drivers/timer/mtk_timer.c
F: drivers/watchdog/mtk_wdt.c
F: drivers/net/mtk_eth.c
@@ -445,6 +445,13 @@ T: git https://gitlab.denx.de/u-boot/custodians/u-boot-cfi-flash.git
F: drivers/mtd/cfi_flash.c
F: drivers/mtd/jedec_flash.c
+CLOCK
+M: Lukasz Majewski <lukma@denx.de>
+S: Maintained
+T: git git://git.denx.de/u-boot-dfu.git
+F: drivers/clk/
+F: drivers/clk/imx/
+
COLDFIRE
M: Huan Wang <alison.wang@nxp.com>
M: Angelo Dureghello <angelo@sysam.it>
@@ -778,6 +785,11 @@ F: drivers/tee/
F: include/tee.h
F: include/tee/
+TEE-lib
+M: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+S: Maintained
+F: lib/optee
+
UBI
M: Kyungmin Park <kmpark@infradead.org>
M: Heiko Schocher <hs@denx.de>
diff --git a/README b/README
index 8f816ad2af..7e610a8ebd 100644
--- a/README
+++ b/README
@@ -960,10 +960,6 @@ The following options need to be configured:
CONFIG_SH_ETHER_CACHE_WRITEBACK
If this option is set, the driver enables cache flush.
-- PWM Support:
- CONFIG_PWM_IMX
- Support for PWM module on the imx6.
-
- TPM Support:
CONFIG_TPM
Support TPM devices.
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 77d1b6021b..49d1faef32 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -551,6 +551,7 @@ dtb-$(CONFIG_MX6Q) += \
imx6q-tbs2910.dtb
dtb-$(CONFIG_MX6QDL) += \
+ imx6dl-dhcom-pdk2.dtb \
imx6dl-icore.dtb \
imx6dl-icore-mipi.dtb \
imx6dl-icore-rqs.dtb \
@@ -559,6 +560,7 @@ dtb-$(CONFIG_MX6QDL) += \
imx6dl-sabresd.dtb \
imx6dl-wandboard-revb1.dtb \
imx6q-cm-fx6.dtb \
+ imx6q-dhcom-pdk2.dtb \
imx6q-icore.dtb \
imx6q-icore-mipi.dtb \
imx6q-icore-rqs.dtb \
@@ -599,8 +601,7 @@ dtb-$(CONFIG_MX6ULL) += \
dtb-$(CONFIG_ARCH_MX6) += \
imx6-apalis.dtb \
- imx6-colibri.dtb \
- imx6q-dhcom-pdk2.dtb
+ imx6-colibri.dtb
dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \
imx7d-sdb-qspi.dtb \
diff --git a/arch/arm/dts/fsl-imx8dx.dtsi b/arch/arm/dts/fsl-imx8dx.dtsi
index 715abb413d..0c33eee6d2 100644
--- a/arch/arm/dts/fsl-imx8dx.dtsi
+++ b/arch/arm/dts/fsl-imx8dx.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/pads-imx8qxp.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
model = "Freescale i.MX8DX";
@@ -30,6 +31,14 @@
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &gpio5;
+ gpio6 = &gpio6;
+ gpio7 = &gpio7;
};
memory@80000000 {
@@ -543,6 +552,61 @@
power-domains = <&pd_conn_enet1>;
status = "disabled";
};
+
+ tsens: thermal-sensor {
+ compatible = "nxp,imx8qxp-sc-tsens";
+ /* number of the temp sensor on the chip */
+ tsens-num = <2>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ thermal_zones: thermal-zones {
+ /* cpu thermal */
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ /*the slope and offset of the temp sensor */
+ thermal-sensors = <&tsens 0>;
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit0: trip1 {
+ temperature = <127000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ drc-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tsens 1>;
+ status = "disabled";
+ trips {
+ drc_alert0: trip0 {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ drc_crit0: trip1 {
+ temperature = <127000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
};
&A35_0 {
diff --git a/arch/arm/dts/imx28-pinfunc.h b/arch/arm/dts/imx28-pinfunc.h
new file mode 100644
index 0000000000..e11f69ba0f
--- /dev/null
+++ b/arch/arm/dts/imx28-pinfunc.h
@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0 0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1 0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2 0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3 0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4 0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5 0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6 0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7 0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N 0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N 0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N 0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N 0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0 0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1 0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2 0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3 0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN 0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN 0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE 0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE 0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN 0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0 0x1000
+#define MX28_PAD_LCD_D01__LCD_D1 0x1010
+#define MX28_PAD_LCD_D02__LCD_D2 0x1020
+#define MX28_PAD_LCD_D03__LCD_D3 0x1030
+#define MX28_PAD_LCD_D04__LCD_D4 0x1040
+#define MX28_PAD_LCD_D05__LCD_D5 0x1050
+#define MX28_PAD_LCD_D06__LCD_D6 0x1060
+#define MX28_PAD_LCD_D07__LCD_D7 0x1070
+#define MX28_PAD_LCD_D08__LCD_D8 0x1080
+#define MX28_PAD_LCD_D09__LCD_D9 0x1090
+#define MX28_PAD_LCD_D10__LCD_D10 0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11 0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12 0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13 0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14 0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15 0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16 0x1100
+#define MX28_PAD_LCD_D17__LCD_D17 0x1110
+#define MX28_PAD_LCD_D18__LCD_D18 0x1120
+#define MX28_PAD_LCD_D19__LCD_D19 0x1130
+#define MX28_PAD_LCD_D20__LCD_D20 0x1140
+#define MX28_PAD_LCD_D21__LCD_D21 0x1150
+#define MX28_PAD_LCD_D22__LCD_D22 0x1160
+#define MX28_PAD_LCD_D23__LCD_D23 0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E 0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN 0x1190
+#define MX28_PAD_LCD_RS__LCD_RS 0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS 0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC 0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC 0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK 0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE 0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0 0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1 0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2 0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3 0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4 0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5 0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6 0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7 0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD 0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT 0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK 0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK 0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD 0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0 0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3 0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK 0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD 0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0 0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3 0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4 0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5 0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK 0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD 0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0 0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3 0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX 0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX 0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS 0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS 0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX 0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX 0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS 0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS 0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX 0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX 0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS 0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS 0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX 0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX 0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS 0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS 0x30f0
+#define MX28_PAD_PWM0__PWM_0 0x3100
+#define MX28_PAD_PWM1__PWM_1 0x3110
+#define MX28_PAD_PWM2__PWM_2 0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK 0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK 0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK 0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL 0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA 0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX 0x31b0
+#define MX28_PAD_PWM3__PWM_3 0x31c0
+#define MX28_PAD_PWM4__PWM_4 0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET 0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC 0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO 0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN 0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK 0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN 0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK 0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL 0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS 0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET 0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK 0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0 0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1 0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2 0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3 0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4 0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5 0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6 0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7 0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8 0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9 0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10 0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11 0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12 0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13 0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14 0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15 0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0 0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0 0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1 0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1 0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK 0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK 0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0 0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1 0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN 0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0 0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1 0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2 0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3 0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4 0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5 0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6 0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7 0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8 0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9 0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10 0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11 0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12 0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13 0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14 0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0 0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1 0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2 0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN 0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN 0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN 0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N 0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N 0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE 0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0 0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1 0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2 0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3 0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4 0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5 0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6 0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7 0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0 0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3 0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX 0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX 0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT 0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD 0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX 0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX 0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK 0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK 0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1 0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2 0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD 0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8 0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9 0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3 0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4 0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT 0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN 0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT 0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN 0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC 0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC 0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK 0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE 0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK 0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0 0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3 0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD 0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK 0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1 0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2 0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6 0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7 0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX 0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX 0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX 0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX 0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1 0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2 0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX 0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX 0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS 0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS 0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL 0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA 0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX 0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX 0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT 0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT 0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT 0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID 0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1 0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2 0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL 0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA 0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX 0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX 0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX 0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX 0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL 0x3101
+#define MX28_PAD_PWM1__I2C1_SDA 0x3111
+#define MX28_PAD_PWM2__USB0_ID 0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3 0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4 0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5 0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6 0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA 0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB 0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7 0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC 0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N 0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N 0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N 0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N 0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4 0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER 0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6 0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7 0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER 0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN 0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN 0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER 0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK 0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID 0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER 0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER 0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4 0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5 0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0 0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1 0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2 0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3 0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4 0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5 0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6 0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7 0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8 0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9 0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10 0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11 0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12 0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13 0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14 0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15 0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7 0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6 0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5 0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4 0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3 0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2 0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1 0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0 0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL 0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK 0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL 0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK 0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT 0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN 0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT 0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN 0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT 0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT 0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT 0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN 0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT 0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN 0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS 0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS 0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX 0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX 0x3032
+#define MX28_PAD_AUART1_RX__PWM_0 0x3042
+#define MX28_PAD_AUART1_TX__PWM_1 0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA 0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB 0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4 0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5 0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK 0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK 0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT 0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN 0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT 0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN 0x30f2
+#define MX28_PAD_PWM0__DUART_RX 0x3102
+#define MX28_PAD_PWM1__DUART_TX 0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT 0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS 0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS 0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX 0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX 0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX 0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX 0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER 0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT 0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT 0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN 0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT 0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN 0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN 0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT 0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN 0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0 0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1 0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2 0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3 0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4 0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5 0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6 0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7 0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16 0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17 0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18 0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19 0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20 0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21 0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22 0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23 0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24 0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25 0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26 0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27 0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28 0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0 0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1 0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2 0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3 0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4 0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5 0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6 0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7 0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8 0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9 0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10 0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11 0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12 0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13 0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14 0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15 0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16 0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17 0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18 0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19 0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20 0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21 0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22 0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23 0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24 0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26 0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27 0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28 0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29 0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31 0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0 0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1 0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2 0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3 0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4 0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5 0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6 0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7 0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8 0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9 0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10 0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12 0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13 0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14 0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15 0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16 0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17 0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18 0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19 0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20 0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21 0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24 0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25 0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26 0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27 0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0 0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1 0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2 0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3 0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4 0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5 0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6 0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7 0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8 0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9 0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10 0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11 0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12 0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13 0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14 0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15 0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16 0x3103
+#define MX28_PAD_PWM1__GPIO_3_17 0x3113
+#define MX28_PAD_PWM2__GPIO_3_18 0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24 0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25 0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27 0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28 0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29 0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30 0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0 0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1 0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3 0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4 0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7 0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8 0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9 0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10 0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11 0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12 0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14 0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15 0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16 0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20 0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/arch/arm/dts/imx28-u-boot.dtsi b/arch/arm/dts/imx28-u-boot.dtsi
new file mode 100644
index 0000000000..d545b402a7
--- /dev/null
+++ b/arch/arm/dts/imx28-u-boot.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ */
+#include "imx28.dtsi"
+
+&gpio0 {
+ gpio-ranges = <&pinctrl 0 0 29>;
+};
+
+&gpio1 {
+ gpio-ranges = <&pinctrl 0 29 32>;
+};
+
+&gpio2 {
+ gpio-ranges = <&pinctrl 0 61 28>;
+};
+
+&gpio3 {
+ gpio-ranges = <&pinctrl 0 89 31>;
+};
+
+&gpio4 {
+ gpio-ranges = <&pinctrl 0 120 21>;
+};
diff --git a/arch/arm/dts/imx28.dtsi b/arch/arm/dts/imx28.dtsi
new file mode 100644
index 0000000000..e14d8ef015
--- /dev/null
+++ b/arch/arm/dts/imx28.dtsi
@@ -0,0 +1,1330 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28-pinfunc.h"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&icoll>;
+ /*
+ * The decompressor and also some bootloaders rely on a
+ * pre-existing /chosen node to be available to insert the
+ * command line and merge other ATAGS info.
+ */
+ chosen {};
+
+ aliases {
+ ethernet0 = &mac0;
+ ethernet1 = &mac1;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ saif0 = &saif0;
+ saif1 = &saif1;
+ serial0 = &auart0;
+ serial1 = &auart1;
+ serial2 = &auart2;
+ serial3 = &auart3;
+ serial4 = &auart4;
+ spi0 = &ssp1;
+ spi1 = &ssp2;
+ usbphy0 = &usbphy0;
+ usbphy1 = &usbphy1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ apb@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x80000>;
+ ranges;
+
+ apbh@80000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x3c900>;
+ ranges;
+
+ icoll: interrupt-controller@80000000 {
+ compatible = "fsl,imx28-icoll", "fsl,icoll";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x80000000 0x2000>;
+ };
+
+ hsadc: hsadc@80002000 {
+ reg = <0x80002000 0x2000>;
+ interrupts = <13>;
+ dmas = <&dma_apbh 12>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ dma_apbh: dma-apbh@80004000 {
+ compatible = "fsl,imx28-dma-apbh";
+ reg = <0x80004000 0x2000>;
+ interrupts = <82 83 84 85
+ 88 88 88 88
+ 88 88 88 88
+ 87 86 0 0>;
+ interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+ "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+ "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+ "hsadc", "lcdif", "empty", "empty";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ clocks = <&clks 25>;
+ };
+
+ perfmon: perfmon@80006000 {
+ reg = <0x80006000 0x800>;
+ interrupts = <27>;
+ status = "disabled";
+ };
+
+ gpmi: gpmi-nand@8000c000 {
+ compatible = "fsl,imx28-gpmi-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+ reg-names = "gpmi-nand", "bch";
+ interrupts = <41>;
+ interrupt-names = "bch";
+ clocks = <&clks 50>;
+ clock-names = "gpmi_io";
+ dmas = <&dma_apbh 4>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ ssp0: spi@80010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80010000 0x2000>;
+ interrupts = <96>;
+ clocks = <&clks 46>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ ssp1: spi@80012000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80012000 0x2000>;
+ interrupts = <97>;
+ clocks = <&clks 47>;
+ dmas = <&dma_apbh 1>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ ssp2: spi@80014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80014000 0x2000>;
+ interrupts = <98>;
+ clocks = <&clks 48>;
+ dmas = <&dma_apbh 2>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ ssp3: spi@80016000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x80016000 0x2000>;
+ interrupts = <99>;
+ clocks = <&clks 49>;
+ dmas = <&dma_apbh 3>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@80018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-pinctrl", "simple-bus";
+ reg = <0x80018000 0x2000>;
+
+ gpio0: gpio@0 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <0>;
+ interrupts = <127>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@1 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <1>;
+ interrupts = <126>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@2 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <2>;
+ interrupts = <125>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@3 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <3>;
+ interrupts = <124>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@4 {
+ compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <4>;
+ interrupts = <123>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ duart_pins_a: duart@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM0__DUART_RX
+ MX28_PAD_PWM1__DUART_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ duart_pins_b: duart@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_CTS__DUART_RX
+ MX28_PAD_AUART0_RTS__DUART_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ duart_4pins_a: duart-4pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_CTS__DUART_RX
+ MX28_PAD_AUART0_RTS__DUART_TX
+ MX28_PAD_AUART0_RX__DUART_CTS
+ MX28_PAD_AUART0_TX__DUART_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ gpmi_pins_a: gpmi-nand@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D00__GPMI_D0
+ MX28_PAD_GPMI_D01__GPMI_D1
+ MX28_PAD_GPMI_D02__GPMI_D2
+ MX28_PAD_GPMI_D03__GPMI_D3
+ MX28_PAD_GPMI_D04__GPMI_D4
+ MX28_PAD_GPMI_D05__GPMI_D5
+ MX28_PAD_GPMI_D06__GPMI_D6
+ MX28_PAD_GPMI_D07__GPMI_D7
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N
+ MX28_PAD_GPMI_RDY0__GPMI_READY0
+ MX28_PAD_GPMI_RDN__GPMI_RDN
+ MX28_PAD_GPMI_WRN__GPMI_WRN
+ MX28_PAD_GPMI_ALE__GPMI_ALE
+ MX28_PAD_GPMI_CLE__GPMI_CLE
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ gpmi_status_cfg: gpmi-status-cfg@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_RDN__GPMI_RDN
+ MX28_PAD_GPMI_WRN__GPMI_WRN
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ };
+
+ auart0_pins_a: auart0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_RX__AUART0_RX
+ MX28_PAD_AUART0_TX__AUART0_TX
+ MX28_PAD_AUART0_CTS__AUART0_CTS
+ MX28_PAD_AUART0_RTS__AUART0_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart0_2pins_a: auart0-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_RX__AUART0_RX
+ MX28_PAD_AUART0_TX__AUART0_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart1_pins_a: auart1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RX__AUART1_RX
+ MX28_PAD_AUART1_TX__AUART1_TX
+ MX28_PAD_AUART1_CTS__AUART1_CTS
+ MX28_PAD_AUART1_RTS__AUART1_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart1_2pins_a: auart1-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RX__AUART1_RX
+ MX28_PAD_AUART1_TX__AUART1_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart2_2pins_a: auart2-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__AUART2_RX
+ MX28_PAD_SSP2_MOSI__AUART2_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart2_2pins_b: auart2-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__AUART2_RX
+ MX28_PAD_AUART2_TX__AUART2_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart2_pins_a: auart2-pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__AUART2_RX
+ MX28_PAD_AUART2_TX__AUART2_TX
+ MX28_PAD_AUART2_CTS__AUART2_CTS
+ MX28_PAD_AUART2_RTS__AUART2_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart3_pins_a: auart3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART3_RX__AUART3_RX
+ MX28_PAD_AUART3_TX__AUART3_TX
+ MX28_PAD_AUART3_CTS__AUART3_CTS
+ MX28_PAD_AUART3_RTS__AUART3_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart3_2pins_a: auart3-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_MISO__AUART3_RX
+ MX28_PAD_SSP2_SS0__AUART3_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart3_2pins_b: auart3-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART3_RX__AUART3_RX
+ MX28_PAD_AUART3_TX__AUART3_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart4_2pins_a: auart4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP3_SCK__AUART4_TX
+ MX28_PAD_SSP3_MOSI__AUART4_RX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ auart4_2pins_b: auart4@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_CTS__AUART4_RX
+ MX28_PAD_AUART0_RTS__AUART4_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mac0_pins_a: mac0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_ENET0_MDC__ENET0_MDC
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mac0_pins_b: mac0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_ENET0_MDC__ENET0_MDC
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1
+ MX28_PAD_ENET0_RXD2__ENET0_RXD2
+ MX28_PAD_ENET0_RXD3__ENET0_RXD3
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1
+ MX28_PAD_ENET0_TXD2__ENET0_TXD2
+ MX28_PAD_ENET0_TXD3__ENET0_TXD3
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET
+ MX28_PAD_ENET0_COL__ENET0_COL
+ MX28_PAD_ENET0_CRS__ENET0_CRS
+ MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
+ MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mac1_pins_a: mac1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1
+ MX28_PAD_ENET0_COL__ENET1_TX_EN
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc0_8bit_pins_a: mmc0-8bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA0__SSP0_D0
+ MX28_PAD_SSP0_DATA1__SSP0_D1
+ MX28_PAD_SSP0_DATA2__SSP0_D2
+ MX28_PAD_SSP0_DATA3__SSP0_D3
+ MX28_PAD_SSP0_DATA4__SSP0_D4
+ MX28_PAD_SSP0_DATA5__SSP0_D5
+ MX28_PAD_SSP0_DATA6__SSP0_D6
+ MX28_PAD_SSP0_DATA7__SSP0_D7
+ MX28_PAD_SSP0_CMD__SSP0_CMD
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+ MX28_PAD_SSP0_SCK__SSP0_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc0_4bit_pins_a: mmc0-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA0__SSP0_D0
+ MX28_PAD_SSP0_DATA1__SSP0_D1
+ MX28_PAD_SSP0_DATA2__SSP0_D2
+ MX28_PAD_SSP0_DATA3__SSP0_D3
+ MX28_PAD_SSP0_CMD__SSP0_CMD
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+ MX28_PAD_SSP0_SCK__SSP0_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc0_cd_cfg: mmc0-cd-cfg@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+ >;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc0_sck_cfg: mmc0-sck-cfg@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_SCK__SSP0_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc1_4bit_pins_a: mmc1-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_D00__SSP1_D0
+ MX28_PAD_GPMI_D01__SSP1_D1
+ MX28_PAD_GPMI_D02__SSP1_D2
+ MX28_PAD_GPMI_D03__SSP1_D3
+ MX28_PAD_GPMI_RDY1__SSP1_CMD
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+ MX28_PAD_GPMI_WRN__SSP1_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc1_cd_cfg: mmc1-cd-cfg@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+ >;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc1_sck_cfg: mmc1-sck-cfg@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_WRN__SSP1_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+
+ mmc2_4bit_pins_a: mmc2-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA4__SSP2_D0
+ MX28_PAD_SSP1_SCK__SSP2_D1
+ MX28_PAD_SSP1_CMD__SSP2_D2
+ MX28_PAD_SSP0_DATA5__SSP2_D3
+ MX28_PAD_SSP0_DATA6__SSP2_CMD
+ MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+ MX28_PAD_SSP0_DATA7__SSP2_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc2_4bit_pins_b: mmc2-4bit@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__SSP2_SCK
+ MX28_PAD_SSP2_MOSI__SSP2_CMD
+ MX28_PAD_SSP2_MISO__SSP2_D0
+ MX28_PAD_SSP2_SS0__SSP2_D3
+ MX28_PAD_SSP2_SS1__SSP2_D1
+ MX28_PAD_SSP2_SS2__SSP2_D2
+ MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc2_cd_cfg: mmc2-cd-cfg@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+ >;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA7__SSP2_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__SSP2_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ i2c0_pins_a: i2c0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_I2C0_SCL__I2C0_SCL
+ MX28_PAD_I2C0_SDA__I2C0_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ i2c0_pins_b: i2c0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART0_RX__I2C0_SCL
+ MX28_PAD_AUART0_TX__I2C0_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM0__I2C1_SCL
+ MX28_PAD_PWM1__I2C1_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ i2c1_pins_b: i2c1@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_CTS__I2C1_SCL
+ MX28_PAD_AUART2_RTS__I2C1_SDA
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ saif0_pins_a: saif0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+ MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+ MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ saif0_pins_b: saif0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+ MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+ MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ saif1_pins_a: saif1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ pwm0_pins_a: pwm0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM0__PWM_0
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ pwm2_pins_a: pwm2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__PWM_2
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ pwm3_pins_a: pwm3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM3__PWM_3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ pwm3_pins_b: pwm3@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SAIF0_MCLK__PWM_3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ pwm4_pins_a: pwm4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM4__PWM_4
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_24bit_pins_a: lcdif-24bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D00__LCD_D0
+ MX28_PAD_LCD_D01__LCD_D1
+ MX28_PAD_LCD_D02__LCD_D2
+ MX28_PAD_LCD_D03__LCD_D3
+ MX28_PAD_LCD_D04__LCD_D4
+ MX28_PAD_LCD_D05__LCD_D5
+ MX28_PAD_LCD_D06__LCD_D6
+ MX28_PAD_LCD_D07__LCD_D7
+ MX28_PAD_LCD_D08__LCD_D8
+ MX28_PAD_LCD_D09__LCD_D9
+ MX28_PAD_LCD_D10__LCD_D10
+ MX28_PAD_LCD_D11__LCD_D11
+ MX28_PAD_LCD_D12__LCD_D12
+ MX28_PAD_LCD_D13__LCD_D13
+ MX28_PAD_LCD_D14__LCD_D14
+ MX28_PAD_LCD_D15__LCD_D15
+ MX28_PAD_LCD_D16__LCD_D16
+ MX28_PAD_LCD_D17__LCD_D17
+ MX28_PAD_LCD_D18__LCD_D18
+ MX28_PAD_LCD_D19__LCD_D19
+ MX28_PAD_LCD_D20__LCD_D20
+ MX28_PAD_LCD_D21__LCD_D21
+ MX28_PAD_LCD_D22__LCD_D22
+ MX28_PAD_LCD_D23__LCD_D23
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_18bit_pins_a: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D00__LCD_D0
+ MX28_PAD_LCD_D01__LCD_D1
+ MX28_PAD_LCD_D02__LCD_D2
+ MX28_PAD_LCD_D03__LCD_D3
+ MX28_PAD_LCD_D04__LCD_D4
+ MX28_PAD_LCD_D05__LCD_D5
+ MX28_PAD_LCD_D06__LCD_D6
+ MX28_PAD_LCD_D07__LCD_D7
+ MX28_PAD_LCD_D08__LCD_D8
+ MX28_PAD_LCD_D09__LCD_D9
+ MX28_PAD_LCD_D10__LCD_D10
+ MX28_PAD_LCD_D11__LCD_D11
+ MX28_PAD_LCD_D12__LCD_D12
+ MX28_PAD_LCD_D13__LCD_D13
+ MX28_PAD_LCD_D14__LCD_D14
+ MX28_PAD_LCD_D15__LCD_D15
+ MX28_PAD_LCD_D16__LCD_D16
+ MX28_PAD_LCD_D17__LCD_D17
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_16bit_pins_a: lcdif-16bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D00__LCD_D0
+ MX28_PAD_LCD_D01__LCD_D1
+ MX28_PAD_LCD_D02__LCD_D2
+ MX28_PAD_LCD_D03__LCD_D3
+ MX28_PAD_LCD_D04__LCD_D4
+ MX28_PAD_LCD_D05__LCD_D5
+ MX28_PAD_LCD_D06__LCD_D6
+ MX28_PAD_LCD_D07__LCD_D7
+ MX28_PAD_LCD_D08__LCD_D8
+ MX28_PAD_LCD_D09__LCD_D9
+ MX28_PAD_LCD_D10__LCD_D10
+ MX28_PAD_LCD_D11__LCD_D11
+ MX28_PAD_LCD_D12__LCD_D12
+ MX28_PAD_LCD_D13__LCD_D13
+ MX28_PAD_LCD_D14__LCD_D14
+ MX28_PAD_LCD_D15__LCD_D15
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_sync_pins_a: lcdif-sync@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_RS__LCD_DOTCLK
+ MX28_PAD_LCD_CS__LCD_ENABLE
+ MX28_PAD_LCD_RD_E__LCD_VSYNC
+ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ can0_pins_a: can0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_RDY2__CAN0_TX
+ MX28_PAD_GPMI_RDY3__CAN0_RX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ can1_pins_a: can1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_GPMI_CE2N__CAN1_TX
+ MX28_PAD_GPMI_CE3N__CAN1_RX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ spi2_pins_a: spi2@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SCK__SSP2_SCK
+ MX28_PAD_SSP2_MOSI__SSP2_CMD
+ MX28_PAD_SSP2_MISO__SSP2_D0
+ MX28_PAD_SSP2_SS0__SSP2_D3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ spi3_pins_a: spi3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__SSP3_D4
+ MX28_PAD_AUART2_TX__SSP3_D5
+ MX28_PAD_SSP3_SCK__SSP3_SCK
+ MX28_PAD_SSP3_MOSI__SSP3_CMD
+ MX28_PAD_SSP3_MISO__SSP3_D0
+ MX28_PAD_SSP3_SS0__SSP3_D3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ spi3_pins_b: spi3@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP3_SCK__SSP3_SCK
+ MX28_PAD_SSP3_MOSI__SSP3_CMD
+ MX28_PAD_SSP3_MISO__SSP3_D0
+ MX28_PAD_SSP3_SS0__SSP3_D3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ usb0_pins_a: usb0@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ usb0_pins_b: usb0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ usb1_pins_a: usb1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ usb0_id_pins_a: usb0id@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RTS__USB0_ID
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ usb0_id_pins_b: usb0id1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__USB0_ID
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ };
+
+ digctl: digctl@8001c000 {
+ compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
+ reg = <0x8001c000 0x2000>;
+ interrupts = <89>;
+ status = "disabled";
+ };
+
+ etm: etm@80022000 {
+ reg = <0x80022000 0x2000>;
+ status = "disabled";
+ };
+
+ dma_apbx: dma-apbx@80024000 {
+ compatible = "fsl,imx28-dma-apbx";
+ reg = <0x80024000 0x2000>;
+ interrupts = <78 79 66 0
+ 80 81 68 69
+ 70 71 72 73
+ 74 75 76 77>;
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
+ "saif0", "saif1", "i2c0", "i2c1",
+ "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+ "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ clocks = <&clks 26>;
+ };
+
+ dcp: dcp@80028000 {
+ compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
+ reg = <0x80028000 0x2000>;
+ interrupts = <52 53 54>;
+ status = "okay";
+ };
+
+ pxp: pxp@8002a000 {
+ reg = <0x8002a000 0x2000>;
+ interrupts = <39>;
+ status = "disabled";
+ };
+
+ ocotp: ocotp@8002c000 {
+ compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x8002c000 0x2000>;
+ clocks = <&clks 25>;
+ };
+
+ axi-ahb@8002e000 {
+ reg = <0x8002e000 0x2000>;
+ status = "disabled";
+ };
+
+ lcdif: lcdif@80030000 {
+ compatible = "fsl,imx28-lcdif";
+ reg = <0x80030000 0x2000>;
+ interrupts = <38>;
+ clocks = <&clks 55>;
+ dmas = <&dma_apbh 13>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
+ can0: can@80032000 {
+ compatible = "fsl,imx28-flexcan";
+ reg = <0x80032000 0x2000>;
+ interrupts = <8>;
+ clocks = <&clks 58>, <&clks 58>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can1: can@80034000 {
+ compatible = "fsl,imx28-flexcan";
+ reg = <0x80034000 0x2000>;
+ interrupts = <9>;
+ clocks = <&clks 59>, <&clks 59>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ simdbg: simdbg@8003c000 {
+ reg = <0x8003c000 0x200>;
+ status = "disabled";
+ };
+
+ simgpmisel: simgpmisel@8003c200 {
+ reg = <0x8003c200 0x100>;
+ status = "disabled";
+ };
+
+ simsspsel: simsspsel@8003c300 {
+ reg = <0x8003c300 0x100>;
+ status = "disabled";
+ };
+
+ simmemsel: simmemsel@8003c400 {
+ reg = <0x8003c400 0x100>;
+ status = "disabled";
+ };
+
+ gpiomon: gpiomon@8003c500 {
+ reg = <0x8003c500 0x100>;
+ status = "disabled";
+ };
+
+ simenet: simenet@8003c700 {
+ reg = <0x8003c700 0x100>;
+ status = "disabled";
+ };
+
+ armjtag: armjtag@8003c800 {
+ reg = <0x8003c800 0x100>;
+ status = "disabled";
+ };
+ };
+
+ apbx@80040000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80040000 0x40000>;
+ ranges;
+
+ clks: clkctrl@80040000 {
+ compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+ reg = <0x80040000 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ saif0: saif@80042000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx28-saif";
+ reg = <0x80042000 0x2000>;
+ interrupts = <59>;
+ #clock-cells = <0>;
+ clocks = <&clks 53>;
+ dmas = <&dma_apbx 4>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ power: power@80044000 {
+ reg = <0x80044000 0x2000>;
+ status = "disabled";
+ };
+
+ saif1: saif@80046000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx28-saif";
+ reg = <0x80046000 0x2000>;
+ interrupts = <58>;
+ clocks = <&clks 54>;
+ dmas = <&dma_apbx 5>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ lradc: lradc@80050000 {
+ compatible = "fsl,imx28-lradc";
+ reg = <0x80050000 0x2000>;
+ interrupts = <10 14 15 16 17 18 19
+ 20 21 22 23 24 25>;
+ status = "disabled";
+ clocks = <&clks 41>;
+ #io-channel-cells = <1>;
+ };
+
+ spdif: spdif@80054000 {
+ reg = <0x80054000 0x2000>;
+ interrupts = <45>;
+ dmas = <&dma_apbx 2>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
+ mxs_rtc: rtc@80056000 {
+ compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+ reg = <0x80056000 0x2000>;
+ interrupts = <29>;
+ };
+
+ i2c0: i2c@80058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-i2c";
+ reg = <0x80058000 0x2000>;
+ interrupts = <111>;
+ clock-frequency = <100000>;
+ dmas = <&dma_apbx 6>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ i2c1: i2c@8005a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-i2c";
+ reg = <0x8005a000 0x2000>;
+ interrupts = <110>;
+ clock-frequency = <100000>;
+ dmas = <&dma_apbx 7>;
+ dma-names = "rx-tx";
+ status = "disabled";
+ };
+
+ pwm: pwm@80064000 {
+ compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+ reg = <0x80064000 0x2000>;
+ clocks = <&clks 44>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <8>;
+ status = "disabled";
+ };
+
+ timer: timrot@80068000 {
+ compatible = "fsl,imx28-timrot", "fsl,timrot";
+ reg = <0x80068000 0x2000>;
+ interrupts = <48 49 50 51>;
+ clocks = <&clks 26>;
+ };
+
+ auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ auart1: serial@8006c000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006c000 0x2000>;
+ interrupts = <113>;
+ dmas = <&dma_apbx 10>, <&dma_apbx 11>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ auart2: serial@8006e000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006e000 0x2000>;
+ interrupts = <114>;
+ dmas = <&dma_apbx 12>, <&dma_apbx 13>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ auart3: serial@80070000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x80070000 0x2000>;
+ interrupts = <115>;
+ dmas = <&dma_apbx 14>, <&dma_apbx 15>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ auart4: serial@80072000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x80072000 0x2000>;
+ interrupts = <116>;
+ dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ status = "disabled";
+ };
+
+ duart: serial@80074000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80074000 0x1000>;
+ interrupts = <47>;
+ clocks = <&clks 45>, <&clks 26>;
+ clock-names = "uart", "apb_pclk";
+ status = "disabled";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+ reg = <0x8007c000 0x2000>;
+ clocks = <&clks 62>;
+ status = "disabled";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+ reg = <0x8007e000 0x2000>;
+ clocks = <&clks 63>;
+ status = "disabled";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80080000 0x80000>;
+ ranges;
+
+ usb0: usb@80080000 {
+ compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+ reg = <0x80080000 0x10000>;
+ interrupts = <93>;
+ clocks = <&clks 60>;
+ fsl,usbphy = <&usbphy0>;
+ status = "disabled";
+ };
+
+ usb1: usb@80090000 {
+ compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+ reg = <0x80090000 0x10000>;
+ interrupts = <92>;
+ clocks = <&clks 61>;
+ fsl,usbphy = <&usbphy1>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ dflpt: dflpt@800c0000 {
+ reg = <0x800c0000 0x10000>;
+ status = "disabled";
+ };
+
+ mac0: ethernet@800f0000 {
+ compatible = "fsl,imx28-fec";
+ reg = <0x800f0000 0x4000>;
+ interrupts = <101>;
+ clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+ clock-names = "ipg", "ahb", "enet_out";
+ status = "disabled";
+ };
+
+ mac1: ethernet@800f4000 {
+ compatible = "fsl,imx28-fec";
+ reg = <0x800f4000 0x4000>;
+ interrupts = <102>;
+ clocks = <&clks 57>, <&clks 57>;
+ clock-names = "ipg", "ahb";
+ status = "disabled";
+ };
+
+ etn_switch: switch@800f8000 {
+ reg = <0x800f8000 0x8000>;
+ status = "disabled";
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&lradc 8>;
+ };
+};
diff --git a/arch/arm/dts/imx53-m53menlo-u-boot.dtsi b/arch/arm/dts/imx53-m53menlo-u-boot.dtsi
index 329fa3b5e2..bc4b3483a6 100644
--- a/arch/arm/dts/imx53-m53menlo-u-boot.dtsi
+++ b/arch/arm/dts/imx53-m53menlo-u-boot.dtsi
@@ -11,6 +11,11 @@
u-boot,dm-pre-reloc;
};
};
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ };
};
&gpio1 {
diff --git a/arch/arm/dts/imx6dl-dhcom-pdk2.dts b/arch/arm/dts/imx6dl-dhcom-pdk2.dts
new file mode 100644
index 0000000000..a0b51bcf38
--- /dev/null
+++ b/arch/arm/dts/imx6dl-dhcom-pdk2.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2019 DH electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Duallite/Solo DHCOM Premium Developer Kit (2)";
+ compatible = "dh,imx6dl-dhcom-pdk2", "dh,imx6dl-dhcom", "fsl,imx6dl";
+};
diff --git a/arch/arm/dts/imx6q-dhcom-pdk2.dts b/arch/arm/dts/imx6q-dhcom-pdk2.dts
index 9c61e3be2d..5bab2db656 100644
--- a/arch/arm/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/dts/imx6q-dhcom-pdk2.dts
@@ -1,151 +1,20 @@
// SPDX-License-Identifier: (GPL-2.0+)
/*
- * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2015-2019 DH electronics GmbH
* Copyright (C) 2018 Marek Vasut <marex@denx.de>
*/
/dts-v1/;
-#include "imx6q-dhcom-som.dtsi"
+#include "imx6q.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
/ {
- model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)";
- compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q";
-
- chosen {
- stdout-path = &uart1;
- };
-
- clk_ext_audio_codec: clock-codec {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- };
-
- sound {
- compatible = "fsl,imx-audio-sgtl5000";
- model = "imx-sgtl5000";
- ssi-controller = <&ssi1>;
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "LINE_IN", "Line In Jack",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <1>;
- mux-ext-port = <3>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_ext>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c2>;
- status = "okay";
-};
-
-&i2c2 {
- sgtl5000: codec@a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- #sound-dai-cells = <0>;
- clocks = <&clk_ext_audio_codec>;
- VDDA-supply = <&reg_3p3v>;
- VDDIO-supply = <&reg_3p3v>;
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
-
- pinctrl_hog: hog-grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0
- MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0
- MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0
- MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0
- MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0
- MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0
- MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0
- MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0
- MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0
- MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0
- MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0
- MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0
- MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0
- MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0
- MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0
- MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0
- MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0
- MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0
- MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0
- MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0
- MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0
- >;
- };
-
- pinctrl_audmux_ext: audmux-ext-grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
- MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
- MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
- MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
- >;
- };
-
- pinctrl_enet_1G: enet-1G-grp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0
- MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1
- MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1
- >;
- };
-
- pinctrl_pcie: pcie-grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1
- >;
- };
-};
-
-&pcie {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcie>;
- reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&ssi1 {
- status = "okay";
+ model = "Freescale i.MX6 Quad/Dual DHCOM Premium Developer Kit (2)";
+ compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom", "fsl,imx6q";
};
&sata {
status = "okay";
};
-&usdhc3 {
- status = "okay";
-};
diff --git a/arch/arm/dts/imx6q-display5-u-boot.dtsi b/arch/arm/dts/imx6q-display5-u-boot.dtsi
new file mode 100644
index 0000000000..b942218b7a
--- /dev/null
+++ b/arch/arm/dts/imx6q-display5-u-boot.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ */
+
+/*
+ * The minimal augmentation DTS U-Boot file to allow UART5
+ * configuration in the pre-relocation stage of U-Boot
+ * proper.
+ *
+ * As the same UART is already configured in SPL, we don't need
+ * setup pinmux for it again.
+ */
+
+/ {
+ aliases {
+ mmc0 = &usdhc4;
+ };
+
+ soc {
+ u-boot,dm-pre-reloc;
+
+ aips-bus@2100000 {
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+};
+
+&i2c3 {
+ at24@50 {
+ u-boot,i2c-offset-len = <2>;
+ };
+};
+
+&uart5 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/imx6q-display5.dts b/arch/arm/dts/imx6q-display5.dts
index 50347ff26b..4e2aa363ed 100644
--- a/arch/arm/dts/imx6q-display5.dts
+++ b/arch/arm/dts/imx6q-display5.dts
@@ -10,9 +10,361 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"
/ {
model = "Liebherr (LWN) display5 i.MX6 Quad Board";
compatible = "lwn,display5", "fsl,imx6q";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
+ status = "okay";
+
+ s25fl256s: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "SPL (spi)";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+ partition@1 {
+ label = "u-boot (spi)";
+ reg = <0x20000 0x100000>;
+ read-only;
+ };
+ partition@2 {
+ label = "uboot-env (spi)";
+ reg = <0x120000 0x10000>;
+ };
+ partition@3 {
+ label = "uboot-envr (spi)";
+ reg = <0x130000 0x10000>;
+ };
+ partition@4 {
+ label = "linux-recovery (spi)";
+ reg = <0x140000 0x800000>;
+ };
+ partition@5 {
+ label = "swupdate-fitImg (spi)";
+ reg = <0x940000 0x400000>;
+ };
+ partition@6 {
+ label = "swupdate-initramfs (spi)";
+ reg = <0xD40000 0x800000>;
+ };
+ };
+};
+
+&ecspi3 {
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-handle = <&ethernet_phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet_phy0: ethernet-phy@0 {
+ compatible = "marvell,88E1510";
+ device_type = "ethernet-phy";
+ /* Set LED0 control: */
+ /* On - Link, Blink - Activity, Off - No Link */
+ marvell,reg-init = <3 0x10 0 0x1011>;
+ max-speed = <100>;
+ reg = <0>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ codec: tfa9879@6c {
+ #sound-dai-cells = <0>;
+ compatible = "nxp,tfa9879";
+ reg = <0x6C>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ at24@50 {
+ compatible = "atmel,24c256";
+ pagesize = <64>;
+ reg = <0x50>;
+ };
+
+ pfuze100: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi2_cs: ecspi2csgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi2_flwp: ecspi2flwpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi3_cs: ecspi3csgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x17059
+ >;
+ };
};
diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
new file mode 100644
index 0000000000..af4719aaeb
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+)
+/*
+ * Copyright (C) 2015-2019 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx6qdl-dhcom.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ clk_ext_audio_codec: clock-codec {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "imx-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_ext>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c2 {
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ #sound-dai-cells = <0>;
+ clocks = <&clk_ext_audio_codec>;
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
+
+ pinctrl_hog: hog-grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0
+ MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0
+ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0
+ MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0
+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0
+ MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0
+ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0
+ MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0
+ >;
+ };
+
+ pinctrl_audmux_ext: audmux-ext-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_enet_1G: enet-1G-grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1
+ >;
+ };
+
+ pinctrl_pcie: pcie-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1
+ >;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&usdhc3 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx6q-dhcom-som.dtsi b/arch/arm/dts/imx6qdl-dhcom.dtsi
index 524cd287c6..1141b6a562 100644
--- a/arch/arm/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/dts/imx6qdl-dhcom.dtsi
@@ -1,10 +1,9 @@
// SPDX-License-Identifier: (GPL-2.0+)
/*
- * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2015-2019 DH electronics GmbH
* Copyright (C) 2018 Marek Vasut <marex@denx.de>
*/
-#include "imx6q.dtsi"
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>
diff --git a/arch/arm/dts/imx7d-pico.dtsi b/arch/arm/dts/imx7d-pico.dtsi
index 9f1fe683db..7cd8be24c8 100644
--- a/arch/arm/dts/imx7d-pico.dtsi
+++ b/arch/arm/dts/imx7d-pico.dtsi
@@ -10,6 +10,7 @@
/ {
aliases {
mmc0 = &usdhc3;
+ usb0 = &usbotg1;
};
/* Will be filled by the bootloader */
@@ -296,6 +297,7 @@
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
+ dr_mode = "peripheral";
status = "okay";
};
diff --git a/arch/arm/dts/mxs-pinfunc.h b/arch/arm/dts/mxs-pinfunc.h
new file mode 100644
index 0000000000..c6da987b20
--- /dev/null
+++ b/arch/arm/dts/mxs-pinfunc.h
@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA 0
+#define MXS_DRIVE_8mA 1
+#define MXS_DRIVE_12mA 2
+#define MXS_DRIVE_16mA 3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW 0
+#define MXS_VOLTAGE_HIGH 1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE 0
+#define MXS_PULL_ENABLE 1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/arch/arm/include/asm/arch-imx8/sci/sci.h b/arch/arm/include/asm/arch-imx8/sci/sci.h
index 97377697f0..901b90d705 100644
--- a/arch/arm/include/asm/arch-imx8/sci/sci.h
+++ b/arch/arm/include/asm/arch-imx8/sci/sci.h
@@ -72,6 +72,8 @@ void sc_misc_get_boot_dev(sc_ipc_t ipc, sc_rsrc_t *boot_dev);
void sc_misc_boot_status(sc_ipc_t ipc, sc_misc_boot_status_t status);
void sc_misc_build_info(sc_ipc_t ipc, u32 *build, u32 *commit);
int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val);
+int sc_misc_get_temp(sc_ipc_t ipc, sc_rsrc_t resource, sc_misc_temp_t temp,
+ s16 *celsius, s8 *tenths);
/* RM API */
sc_bool_t sc_rm_is_memreg_owned(sc_ipc_t ipc, sc_rm_mr_t mr);
diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h
index 5d17b553d7..3629eb68d7 100644
--- a/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h
+++ b/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h
@@ -26,5 +26,6 @@
#define SC_MISC_REL_CONTAINER 2U /* Release container */
typedef u8 sc_misc_boot_status_t;
+typedef u8 sc_misc_temp_t;
#endif /* SC_MISC_API_H */
diff --git a/arch/arm/include/asm/arch-imx8/sys_proto.h b/arch/arm/include/asm/arch-imx8/sys_proto.h
index 73ffaba7d5..b8d2a0b8f0 100644
--- a/arch/arm/include/asm/arch-imx8/sys_proto.h
+++ b/arch/arm/include/asm/arch-imx8/sys_proto.h
@@ -3,6 +3,7 @@
* Copyright 2018 NXP
*/
+#include <asm/arch/sci/sci.h>
#include <asm/mach-imx/sys_proto.h>
#include <linux/types.h>
@@ -15,5 +16,7 @@ struct pass_over_info_t {
u32 g_ap_mu;
};
+void build_info(void);
enum boot_device get_boot_device(void);
int print_bootinfo(void);
+int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate);
diff --git a/arch/arm/include/asm/mach-imx/imx-nandbcb.h b/arch/arm/include/asm/mach-imx/imx-nandbcb.h
new file mode 100644
index 0000000000..033659a038
--- /dev/null
+++ b/arch/arm/include/asm/mach-imx/imx-nandbcb.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _IMX_NAND_BCB_H_
+#define _IMX_NAND_BCB_H_
+
+#define FCB_FINGERPRINT 0x20424346 /* 'FCB' */
+#define FCB_VERSION_1 0x01000000
+
+#define DBBT_FINGERPRINT2 0x54424244 /* 'DBBT' */
+#define DBBT_VERSION_1 0x01000000
+
+struct dbbt_block {
+ u32 checksum; /* reserved on i.MX6 */
+ u32 fingerprint;
+ u32 version;
+ u32 numberbb; /* reserved on i.MX6 */
+ u32 dbbtpages;
+};
+
+struct fcb_block {
+ u32 checksum; /* First fingerprint in first byte */
+ u32 fingerprint; /* 2nd fingerprint at byte 4 */
+ u32 version; /* 3rd fingerprint at byte 8 */
+ u8 datasetup;
+ u8 datahold;
+ u8 addr_setup;
+ u8 dsample_time;
+
+ /* These are for application use only and not for ROM. */
+ u8 nandtiming;
+ u8 rea;
+ u8 rloh;
+ u8 rhoh;
+ u32 pagesize; /* 2048 for 2K pages, 4096 for 4K pages */
+ u32 oob_pagesize; /* 2112 for 2K pages, 4314 for 4K pages */
+ u32 sectors; /* Number of 2K sections per block */
+ u32 nr_nand; /* Total Number of NANDs - not used by ROM */
+ u32 nr_die; /* Number of separate chips in this NAND */
+ u32 celltype; /* MLC or SLC */
+ u32 ecc_type; /* Type of ECC, can be one of BCH-0-20 */
+ u32 ecc_nr; /* Number of bytes for Block0 - BCH */
+
+ /* Block size in bytes for all blocks other than Block0 - BCH */
+ u32 ecc_size;
+ u32 ecc_level; /* Ecc level for Block 0 - BCH */
+ u32 meta_size; /* Metadata size - BCH */
+ /* Number of blocks per page for ROM use - BCH */
+ u32 nr_blocks;
+ u32 ecc_type_sdk; /* Type of ECC, can be one of BCH-0-20 */
+ u32 ecc_nr_sdk; /* Number of bytes for Block0 - BCH */
+ /* Block size in bytes for all blocks other than Block0 - BCH */
+ u32 ecc_size_sdk;
+ u32 ecc_level_sdk; /* Ecc level for Block 0 - BCH */
+ /* Number of blocks per page for SDK use - BCH */
+ u32 nr_blocks_sdk;
+ u32 meta_size_sdk; /* Metadata size - BCH */
+ u32 erase_th; /* To set into BCH_MODE register */
+
+ /*
+ * 0: normal boot
+ * 1: to load patch starting next to FCB
+ */
+ u32 bootpatch;
+ u32 patch_size; /* Size of patch in sectors */
+ u32 fw1_start; /* Firmware image starts on this sector */
+ u32 fw2_start; /* Secondary FW Image starting Sector */
+ u32 fw1_pages; /* Number of sectors in firmware image */
+ u32 fw2_pages; /* Number of sector in secondary FW image */
+ u32 dbbt_start; /* Page address where dbbt search area begins */
+
+ /*
+ * Byte in page data that have manufacturer marked bad block marker,
+ * this will be swapped with metadata[0] to complete page data.
+ */
+ u32 bb_byte;
+
+ /*
+ * For BCH ECC sizes other than 8 and 16 the bad block marker does not
+ * start at 0th bit of bb_byte. This field is used to get to
+ * the start bit of bad block marker byte with in bb_byte
+ */
+ u32 bb_start_bit;
+
+ /*
+ * FCB value that gives byte offset for
+ * bad block marker on physical NAND page
+ */
+ u32 phy_offset;
+ u32 bchtype;
+
+ u32 readlatency;
+ u32 predelay;
+ u32 cedelay;
+ u32 postdelay;
+ u32 cmdaddpause;
+ u32 datapause;
+ u32 tmspeed;
+ u32 busytimeout;
+
+ /* the flag to enable (1)/disable(0) bi swap */
+ u32 disbbm;
+
+ /* The swap position of main area in spare area */
+ u32 spare_offset;
+};
+
+#endif /* _IMX_NAND_BCB_H_ */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index b6fd1595f0..aeb5493488 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -71,6 +71,17 @@ config CMD_HDMIDETECT
This enables the 'hdmidet' command which detects if an HDMI monitor
is connected.
+config CMD_NANDBCB
+ bool "i.MX6 NAND Boot Control Block(BCB) command"
+ depends on NAND && CMD_MTDPARTS
+ default y if ARCH_MX6 && NAND_MXS
+ help
+ Unlike normal 'nand write/erase' commands, this command update
+ Boot Control Block(BCB) for i.MX6 platform NAND IP's.
+
+ This is similar to kobs-ng, which is used in Linux as separate
+ rootfs package.
+
config NXP_BOARD_REVISION
bool "Read NXP board revision from fuses"
depends on ARCH_MX6 || ARCH_MX7
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 898478fc4a..08ee52edbf 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -59,6 +59,7 @@ ifneq ($(CONFIG_SPL_BUILD),y)
obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
+obj-$(CONFIG_CMD_NANDBCB) += cmd_nandbcb.o
endif
PLUGIN = board/$(BOARDDIR)/plugin
diff --git a/arch/arm/mach-imx/cmd_nandbcb.c b/arch/arm/mach-imx/cmd_nandbcb.c
new file mode 100644
index 0000000000..065b814b2e
--- /dev/null
+++ b/arch/arm/mach-imx/cmd_nandbcb.c
@@ -0,0 +1,369 @@
+/*
+ * i.MX6 nand boot control block(bcb).
+ *
+ * Based on the common/imx-bbu-nand-fcb.c from barebox and imx kobs-ng
+ *
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ * Copyright (C) 2016 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <nand.h>
+
+#include <asm/io.h>
+#include <jffs2/jffs2.h>
+#include <linux/mtd/mtd.h>
+
+#include <asm/mach-imx/imx-nandbcb.h>
+#include <asm/mach-imx/imximage.cfg>
+#include <mxs_nand.h>
+#include <linux/mtd/mtd.h>
+#include <nand.h>
+
+#define BF_VAL(v, bf) (((v) & bf##_MASK) >> bf##_OFFSET)
+#define GETBIT(v, n) (((v) >> (n)) & 0x1)
+
+static u8 calculate_parity_13_8(u8 d)
+{
+ u8 p = 0;
+
+ p |= (GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 3) ^ GETBIT(d, 2)) << 0;
+ p |= (GETBIT(d, 7) ^ GETBIT(d, 5) ^ GETBIT(d, 4) ^ GETBIT(d, 2) ^
+ GETBIT(d, 1)) << 1;
+ p |= (GETBIT(d, 7) ^ GETBIT(d, 6) ^ GETBIT(d, 5) ^ GETBIT(d, 1) ^
+ GETBIT(d, 0)) << 2;
+ p |= (GETBIT(d, 7) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 0)) << 3;
+ p |= (GETBIT(d, 6) ^ GETBIT(d, 4) ^ GETBIT(d, 3) ^ GETBIT(d, 2) ^
+ GETBIT(d, 1) ^ GETBIT(d, 0)) << 4;
+
+ return p;
+}
+
+static void encode_hamming_13_8(void *_src, void *_ecc, size_t size)
+{
+ int i;
+ u8 *src = _src;
+ u8 *ecc = _ecc;
+
+ for (i = 0; i < size; i++)
+ ecc[i] = calculate_parity_13_8(src[i]);
+}
+
+static u32 calc_chksum(void *buf, size_t size)
+{
+ u32 chksum = 0;
+ u8 *bp = buf;
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ chksum += bp[i];
+
+ return ~chksum;
+}
+
+static void fill_fcb(struct fcb_block *fcb, struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct mxs_nand_info *nand_info = nand_get_controller_data(chip);
+
+ fcb->fingerprint = FCB_FINGERPRINT;
+ fcb->version = FCB_VERSION_1;
+ fcb->pagesize = mtd->writesize;
+ fcb->oob_pagesize = mtd->writesize + mtd->oobsize;
+ fcb->sectors = mtd->erasesize / mtd->writesize;
+
+ /* Divide ECC strength by two and save the value into FCB structure. */
+ fcb->ecc_level = nand_info->bch_geometry.ecc_strength >> 1;
+
+ fcb->ecc_type = fcb->ecc_level;
+
+ /* Also hardcoded in kobs-ng */
+ fcb->ecc_nr = 0x00000200;
+ fcb->ecc_size = 0x00000200;
+ fcb->datasetup = 80;
+ fcb->datahold = 60;
+ fcb->addr_setup = 25;
+ fcb->dsample_time = 6;
+ fcb->meta_size = 10;
+
+ /* DBBT search area starts at second page on first block */
+ fcb->dbbt_start = 1;
+
+ fcb->bb_byte = nand_info->bch_geometry.block_mark_byte_offset;
+ fcb->bb_start_bit = nand_info->bch_geometry.block_mark_bit_offset;
+
+ fcb->phy_offset = mtd->writesize;
+
+ fcb->nr_blocks = mtd->writesize / fcb->ecc_nr - 1;
+
+ fcb->checksum = calc_chksum((void *)fcb + 4, sizeof(*fcb) - 4);
+}
+
+static int dbbt_fill_data(struct mtd_info *mtd, void *buf, int num_blocks)
+{
+ int n, n_bad_blocks = 0;
+ u32 *bb = buf + 0x8;
+ u32 *n_bad_blocksp = buf + 0x4;
+
+ for (n = 0; n < num_blocks; n++) {
+ loff_t offset = n * mtd->erasesize;
+ if (mtd_block_isbad(mtd, offset)) {
+ n_bad_blocks++;
+ *bb = n;
+ bb++;
+ }
+ }
+
+ *n_bad_blocksp = n_bad_blocks;
+
+ return n_bad_blocks;
+}
+
+static int nandbcb_update(struct mtd_info *mtd, loff_t off, size_t size,
+ size_t maxsize, const u_char *buf)
+{
+ nand_erase_options_t opts;
+ struct fcb_block *fcb;
+ struct dbbt_block *dbbt;
+ loff_t fw1_off;
+ void *fwbuf, *fcb_raw_page, *dbbt_page, *dbbt_data_page;
+ int nr_blks, nr_blks_fcb, fw1_blk;
+ size_t fwsize, dummy;
+ int i, ret;
+
+ /* erase */
+ memset(&opts, 0, sizeof(opts));
+ opts.offset = off;
+ opts.length = maxsize - 1;
+ ret = nand_erase_opts(mtd, &opts);
+ if (ret) {
+ printf("%s: erase failed (ret = %d)\n", __func__, ret);
+ return ret;
+ }
+
+ /*
+ * Reference documentation from i.MX6DQRM section 8.5.2.2
+ *
+ * Nand Boot Control Block(BCB) contains two data structures,
+ * - Firmware Configuration Block(FCB)
+ * - Discovered Bad Block Table(DBBT)
+ *
+ * FCB contains,
+ * - nand timings
+ * - DBBT search page address,
+ * - start page address of primary firmware
+ * - start page address of secondary firmware
+ *
+ * setup fcb:
+ * - number of blocks = mtd partition size / mtd erasesize
+ * - two firmware blocks, primary and secondary
+ * - first 4 block for FCB/DBBT
+ * - rest split in half for primary and secondary firmware
+ * - same firmware will write two times
+ */
+ nr_blks_fcb = 2;
+ nr_blks = maxsize / mtd->erasesize;
+ fw1_blk = nr_blks_fcb;
+
+ /* write fw */
+ fwsize = ALIGN(size + FLASH_OFFSET_STANDARD + mtd->writesize,
+ mtd->writesize);
+ fwbuf = kzalloc(fwsize, GFP_KERNEL);
+ if (!fwbuf) {
+ debug("failed to allocate fwbuf\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ memcpy(fwbuf + FLASH_OFFSET_STANDARD, buf, size);
+ fw1_off = fw1_blk * mtd->erasesize;
+ ret = nand_write_skip_bad(mtd, fw1_off, &fwsize, NULL, maxsize,
+ (u_char *)fwbuf, WITH_WR_VERIFY);
+ printf("NAND fw write: 0x%llx offset, 0x%x bytes written: %s\n",
+ fw1_off, fwsize, ret ? "ERROR" : "OK");
+ if (ret)
+ goto fwbuf_err;
+
+ /* fill fcb */
+ fcb = kzalloc(sizeof(*fcb), GFP_KERNEL);
+ if (!fcb) {
+ debug("failed to allocate fcb\n");
+ ret = -ENOMEM;
+ goto fwbuf_err;
+ }
+
+ fcb->fw1_start = (fw1_blk * mtd->erasesize) / mtd->writesize;
+ fcb->fw1_pages = size / mtd->writesize + 1;
+ fill_fcb(fcb, mtd);
+
+ /* fill dbbt */
+ dbbt_page = kzalloc(mtd->writesize, GFP_KERNEL);
+ if (!dbbt_page) {
+ debug("failed to allocate dbbt_page\n");
+ ret = -ENOMEM;
+ goto fcb_err;
+ }
+
+ dbbt_data_page = kzalloc(mtd->writesize, GFP_KERNEL);
+ if (!dbbt_data_page) {
+ debug("failed to allocate dbbt_data_page\n");
+ ret = -ENOMEM;
+ goto dbbt_page_err;
+ }
+
+ dbbt = dbbt_page;
+ dbbt->checksum = 0;
+ dbbt->fingerprint = DBBT_FINGERPRINT2;
+ dbbt->version = DBBT_VERSION_1;
+ ret = dbbt_fill_data(mtd, dbbt_data_page, nr_blks);
+ if (ret < 0)
+ goto dbbt_data_page_err;
+ else if (ret > 0)
+ dbbt->dbbtpages = 1;
+
+ /* write fcb/dbbt */
+ fcb_raw_page = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
+ if (!fcb_raw_page) {
+ debug("failed to allocate fcb_raw_page\n");
+ ret = -ENOMEM;
+ goto dbbt_data_page_err;
+ }
+
+ memcpy(fcb_raw_page + 12, fcb, sizeof(struct fcb_block));
+ encode_hamming_13_8(fcb_raw_page + 12, fcb_raw_page + 12 + 512, 512);
+ /*
+ * Set the first and second byte of OOB data to 0xFF, not 0x00. These
+ * bytes are used as the Manufacturers Bad Block Marker (MBBM). Since
+ * the FCB is mostly written to the first page in a block, a scan for
+ * factory bad blocks will detect these blocks as bad, e.g. when
+ * function nand_scan_bbt() is executed to build a new bad block table.
+ */
+ memset(fcb_raw_page + mtd->writesize, 0xFF, 2);
+
+ for (i = 0; i < nr_blks_fcb; i++) {
+ if (mtd_block_isbad(mtd, off)) {
+ printf("Block %d is bad, skipped\n", i);
+ continue;
+ }
+
+ /* raw write */
+ mtd_oob_ops_t ops = {
+ .datbuf = (u8 *)fcb_raw_page,
+ .oobbuf = ((u8 *)fcb_raw_page) + mtd->writesize,
+ .len = mtd->writesize,
+ .ooblen = mtd->oobsize,
+ .mode = MTD_OPS_RAW
+ };
+
+ ret = mtd_write_oob(mtd, mtd->erasesize * i, &ops);
+ if (ret)
+ goto fcb_raw_page_err;
+ debug("NAND fcb write: 0x%x offset, 0x%x bytes written: %s\n",
+ mtd->erasesize * i, ops.len, ret ? "ERROR" : "OK");
+
+ ret = mtd_write(mtd, mtd->erasesize * i + mtd->writesize,
+ mtd->writesize, &dummy, dbbt_page);
+ if (ret)
+ goto fcb_raw_page_err;
+ debug("NAND dbbt write: 0x%x offset, 0x%x bytes written: %s\n",
+ mtd->erasesize * i + mtd->writesize, dummy,
+ ret ? "ERROR" : "OK");
+
+ /* dbbtpages == 0 if no bad blocks */
+ if (dbbt->dbbtpages > 0) {
+ loff_t to = (mtd->erasesize * i + mtd->writesize * 5);
+
+ ret = mtd_write(mtd, to, mtd->writesize, &dummy,
+ dbbt_data_page);
+ if (ret)
+ goto fcb_raw_page_err;
+ }
+ }
+
+fcb_raw_page_err:
+ kfree(fcb_raw_page);
+dbbt_data_page_err:
+ kfree(dbbt_data_page);
+dbbt_page_err:
+ kfree(dbbt_page);
+fcb_err:
+ kfree(fcb);
+fwbuf_err:
+ kfree(fwbuf);
+err:
+ return ret;
+}
+
+static int do_nandbcb_update(int argc, char * const argv[])
+{
+ struct mtd_info *mtd;
+ loff_t addr, offset, size, maxsize;
+ char *endp;
+ u_char *buf;
+ int dev;
+ int ret;
+
+ if (argc != 4)
+ return CMD_RET_USAGE;
+
+ dev = nand_curr_device;
+ if (dev < 0) {
+ printf("failed to get nand_curr_device, run nand device");
+ return CMD_RET_FAILURE;
+ }
+
+ addr = simple_strtoul(argv[1], &endp, 16);
+ if (*argv[1] == 0 || *endp != 0)
+ return CMD_RET_FAILURE;
+
+ mtd = get_nand_dev_by_index(dev);
+ if (mtd_arg_off_size(argc - 2, argv + 2, &dev, &offset, &size,
+ &maxsize, MTD_DEV_TYPE_NAND, mtd->size))
+ return CMD_RET_FAILURE;
+
+ buf = map_physmem(addr, size, MAP_WRBACK);
+ if (!buf) {
+ puts("failed to map physical memory\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = nandbcb_update(mtd, offset, size, maxsize, buf);
+
+ return ret == 0 ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
+}
+
+static int do_nandbcb(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ const char *cmd;
+ int ret = 0;
+
+ if (argc < 5)
+ goto usage;
+
+ cmd = argv[1];
+ --argc;
+ ++argv;
+
+ if (strcmp(cmd, "update") == 0) {
+ ret = do_nandbcb_update(argc, argv);
+ goto done;
+ }
+
+done:
+ if (ret != -1)
+ return ret;
+usage:
+ return CMD_RET_USAGE;
+}
+
+static char nandbcb_help_text[] =
+ "update addr off|partition len - update 'len' bytes starting at\n"
+ " 'off|part' to memory address 'addr', skipping bad blocks";
+
+U_BOOT_CMD(nandbcb, 5, 1, do_nandbcb,
+ "i.MX6 Nand BCB",
+ nandbcb_help_text
+);
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index 3a8cf30c06..6e9a175210 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -289,10 +289,12 @@ void arch_preboot_os(void)
imx_pcie_remove();
#endif
#if defined(CONFIG_SATA)
- sata_remove(0);
+ if (!is_mx6sdl()) {
+ sata_remove(0);
#if defined(CONFIG_MX6)
- disable_sata_clock();
+ disable_sata_clock();
#endif
+ }
#endif
#if defined(CONFIG_VIDEO_IPUV3)
/* disable video before launching O/S */
diff --git a/arch/arm/mach-imx/imx8/Makefile b/arch/arm/mach-imx/imx8/Makefile
index 31ad169ccf..92b5c56acb 100644
--- a/arch/arm/mach-imx/imx8/Makefile
+++ b/arch/arm/mach-imx/imx8/Makefile
@@ -4,4 +4,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += cpu.o iomux.o
+obj-y += cpu.o iomux.o misc.o
diff --git a/arch/arm/mach-imx/imx8/misc.c b/arch/arm/mach-imx/imx8/misc.c
new file mode 100644
index 0000000000..fe73e29eee
--- /dev/null
+++ b/arch/arm/mach-imx/imx8/misc.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <common.h>
+#include <asm/arch/sci/sci.h>
+
+int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
+{
+ sc_pm_clock_rate_t rate = clk_rate;
+ int ret;
+
+ /* Power up UARTn */
+ ret = sc_pm_set_resource_power_mode(-1, uart_rsrc, SC_PM_PW_MODE_ON);
+ if (ret)
+ return ret;
+
+ /* Set UARTn clock root to 'rate' MHz */
+ ret = sc_pm_set_clock_rate(-1, uart_rsrc, SC_PM_CLK_PER, &rate);
+ if (ret)
+ return ret;
+
+ /* Enable UARTn clock root */
+ ret = sc_pm_clock_enable(-1, uart_rsrc, SC_PM_CLK_PER, true, false);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+void build_info(void)
+{
+ u32 sc_build = 0, sc_commit = 0;
+
+ /* Get SCFW build and commit id */
+ sc_misc_build_info(-1, &sc_build, &sc_commit);
+ if (!sc_build) {
+ printf("SCFW does not support build info\n");
+ sc_commit = 0; /* Display 0 if build info not supported */
+ }
+ printf("Build: SCFW %x\n", sc_commit);
+}
diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c
index e80f1d484b..4084ab7672 100644
--- a/arch/arm/mach-imx/mx6/soc.c
+++ b/arch/arm/mach-imx/mx6/soc.c
@@ -95,6 +95,11 @@ u32 get_cpu_rev(void)
type = MXC_CPU_MX6DP;
}
reg &= 0xff; /* mx6 silicon revision */
+
+ /* For 6DQ, the value 0x00630005 is Silicon revision 1.3*/
+ if (((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D)) && (reg == 0x5))
+ reg = 0x3;
+
return (type << 12) | (reg + (0x10 * (major + 1)));
}
diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
index 9f1e0f6a72..1f230aca33 100644
--- a/arch/arm/mach-imx/spl.c
+++ b/arch/arm/mach-imx/spl.c
@@ -24,6 +24,7 @@ u32 spl_boot_device(void)
{
unsigned int bmode = readl(&src_base->sbmr2);
u32 reg = imx6_src_get_boot_mode();
+ u32 mmc_index = ((reg >> 11) & 0x03);
/*
* Check for BMODE if serial downloader is enabled
@@ -84,11 +85,12 @@ u32 spl_boot_device(void)
/* SD/eSD: 8.5.3, Table 8-15 */
case IMX6_BMODE_SD:
case IMX6_BMODE_ESD:
- return BOOT_DEVICE_MMC1;
- /* MMC/eMMC: 8.5.3 */
case IMX6_BMODE_MMC:
case IMX6_BMODE_EMMC:
- return BOOT_DEVICE_MMC1;
+ if (mmc_index == 1)
+ return BOOT_DEVICE_MMC2;
+ else
+ return BOOT_DEVICE_MMC1;
/* NAND Flash: 8.5.2, Table 8-10 */
case IMX6_BMODE_NAND_MIN ... IMX6_BMODE_NAND_MAX:
return BOOT_DEVICE_NAND;
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index a05414e294..27b0baab27 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -211,6 +211,12 @@
clock-mult = <2>;
clocks = <&clk_fixed>;
};
+
+ osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <20000000>;
+ };
};
clk_sandbox: clk-sbox {
@@ -226,6 +232,10 @@
clock-names = "fixed", "i2c", "spi";
};
+ ccf: clk-ccf {
+ compatible = "sandbox,clk-ccf";
+ };
+
eth@10002000 {
compatible = "sandbox,eth";
reg = <0x10002000 0x1000>;
diff --git a/board/armadeus/opos6uldev/board.c b/board/armadeus/opos6uldev/board.c
index aed334f8fb..cbf40d5c4a 100644
--- a/board/armadeus/opos6uldev/board.c
+++ b/board/armadeus/opos6uldev/board.c
@@ -70,27 +70,6 @@ int setup_lcd(void)
}
#endif
-#ifdef CONFIG_USB_EHCI_MX6
-#define USB_OTHERREGS_OFFSET 0x800
-#define UCTRL_PWR_POL (1 << 9)
-
-int board_ehci_hcd_init(int port)
-{
- u32 *usbnc_usb_ctrl;
-
- if (port > 1)
- return -EINVAL;
-
- usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
- port * 4);
-
- /* Set Power polarity */
- setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
-
- return 0;
-}
-#endif
-
int opos6ul_board_late_init(void)
{
#ifdef CONFIG_VIDEO_MXS
diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c
index 1d41690c0c..40cc2a854e 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6.c
@@ -18,7 +18,6 @@
#include <asm/io.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/sata.h>
#include <ahci.h>
#include <dwc_ahsata.h>
@@ -26,7 +25,7 @@
#include <errno.h>
#include <fsl_esdhc_imx.h>
#include <fuse.h>
-#include <i2c.h>
+#include <i2c_eeprom.h>
#include <miiphy.h>
#include <mmc.h>
#include <net.h>
@@ -36,92 +35,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#define I2C_PAD_CTRL \
- (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
- PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define EEPROM_I2C_ADDRESS 0x50
-
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-
-static struct i2c_pads_info dh6sdl_i2c_pad_info0 = {
- .scl = {
- .i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
- .gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
- .gp = IMX_GPIO_NR(3, 21)
- },
- .sda = {
- .i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
- .gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
- .gp = IMX_GPIO_NR(3, 28)
- }
-};
-
-static struct i2c_pads_info dh6sdl_i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
- .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
- .gp = IMX_GPIO_NR(4, 12)
- },
- .sda = {
- .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
- .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
- .gp = IMX_GPIO_NR(4, 13)
- }
-};
-
-static struct i2c_pads_info dh6sdl_i2c_pad_info2 = {
- .scl = {
- .i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
- .gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
- .gp = IMX_GPIO_NR(1, 3)
- },
- .sda = {
- .i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC,
- .gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC,
- .gp = IMX_GPIO_NR(1, 6)
- }
-};
-
-static struct i2c_pads_info dh6dq_i2c_pad_info0 = {
- .scl = {
- .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
- .gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
- .gp = IMX_GPIO_NR(3, 21)
- },
- .sda = {
- .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
- .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
- .gp = IMX_GPIO_NR(3, 28)
- }
-};
-
-static struct i2c_pads_info dh6dq_i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
- .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
- .gp = IMX_GPIO_NR(4, 12)
- },
- .sda = {
- .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
- .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
- .gp = IMX_GPIO_NR(4, 13)
- }
-};
-
-static struct i2c_pads_info dh6dq_i2c_pad_info2 = {
- .scl = {
- .i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
- .gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
- .gp = IMX_GPIO_NR(1, 3)
- },
- .sda = {
- .i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC,
- .gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC,
- .gp = IMX_GPIO_NR(1, 6)
- }
-};
-
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
@@ -196,7 +109,6 @@ int board_eth_init(bd_t *bis)
#ifdef CONFIG_USB_EHCI_MX6
static void setup_usb(void)
{
- gpio_request(IMX_GPIO_NR(3, 31), "USB-VBUS");
/*
* Set daisy chain for otg_pin_id on MX6Q.
* For MX6DL, this bit is reserved.
@@ -211,26 +123,12 @@ int board_usb_phy_mode(int port)
else
return USB_INIT_DEVICE;
}
-
-int board_ehci_power(int port, int on)
-{
- switch (port) {
- case 0:
- break;
- case 1:
- gpio_direction_output(IMX_GPIO_NR(3, 31), !!on);
- break;
- default:
- printf("MXC USB port %d not yet supported\n", port);
- return -EINVAL;
- }
-
- return 0;
-}
#endif
static int setup_dhcom_mac_from_fuse(void)
{
+ struct udevice *dev;
+ ofnode eeprom;
unsigned char enetaddr[6];
int ret;
@@ -245,13 +143,19 @@ static int setup_dhcom_mac_from_fuse(void)
return 0;
}
- ret = i2c_set_bus_num(2);
+ eeprom = ofnode_path("/soc/aips-bus@2100000/i2c@21a8000/eeprom@50");
+ if (!ofnode_valid(eeprom)) {
+ printf("Invalid hardware path to EEPROM!\n");
+ return -ENODEV;
+ }
+
+ ret = uclass_get_device_by_ofnode(UCLASS_I2C_EEPROM, eeprom, &dev);
if (ret) {
- printf("Error switching I2C bus!\n");
+ printf("Cannot find EEPROM!\n");
return ret;
}
- ret = i2c_read(EEPROM_I2C_ADDRESS, 0xfa, 0x1, enetaddr, 0x6);
+ ret = i2c_eeprom_read(dev, 0xfa, enetaddr, 0x6);
if (ret) {
printf("Error reading configuration EEPROM!\n");
return ret;
@@ -282,18 +186,6 @@ int board_init(void)
/* Enable eim_slow clocks */
setbits_le32(&mxc_ccm->CCGR6, 0x1 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET);
-#ifdef CONFIG_SYS_I2C_MXC
- if (is_mx6dq()) {
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info0);
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info1);
- setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6dq_i2c_pad_info2);
- } else {
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info0);
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info1);
- setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &dh6sdl_i2c_pad_info2);
- }
-#endif
-
setup_dhcom_mac_from_fuse();
return 0;
@@ -372,3 +264,18 @@ int checkboard(void)
puts("Board: DHCOM i.MX6\n");
return 0;
}
+
+#ifdef CONFIG_MULTI_DTB_FIT
+int board_fit_config_name_match(const char *name)
+{
+ if (is_mx6dq()) {
+ if (!strcmp(name, "imx6q-dhcom-pdk2"))
+ return 0;
+ } else if (is_mx6sdl()) {
+ if (!strcmp(name, "imx6dl-dhcom-pdk2"))
+ return 0;
+ }
+
+ return -1;
+}
+#endif
diff --git a/board/dhelectronics/dh_imx6/dh_imx6_spl.c b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
index b492961042..1b7acc8df7 100644
--- a/board/dhelectronics/dh_imx6/dh_imx6_spl.c
+++ b/board/dhelectronics/dh_imx6/dh_imx6_spl.c
@@ -440,8 +440,13 @@ static void setup_iomux_sd(void)
/* SPI */
static iomux_v3_cfg_t const ecspi1_pads[] = {
- /* SS0 */
- IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+ /* SS0 - SS of boot flash */
+ IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30 |
+ MUX_PAD_CTRL(SPI_PAD_CTRL | PAD_CTL_PUS_100K_UP)),
+ /* SS2 - SS of DHCOM SPI1 */
+ IOMUX_PADS(PAD_KEY_ROW2__GPIO4_IO11 |
+ MUX_PAD_CTRL(SPI_PAD_CTRL | PAD_CTL_PUS_100K_UP)),
+
IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
diff --git a/board/engicam/common/board.c b/board/engicam/common/board.c
index 7486f0ac2d..567b9f63e5 100644
--- a/board/engicam/common/board.c
+++ b/board/engicam/common/board.c
@@ -53,8 +53,6 @@ static void setenv_fdt_file(void)
env_set("fdt_file", "imx6dl-icore-rqs.dtb");
} else if (!strcmp(cmp_dtb, "imx6ul-geam"))
env_set("fdt_file", "imx6ul-geam.dtb");
- else if (!strcmp(cmp_dtb, "imx6ul-isiot-mmc"))
- env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
else if (!strcmp(cmp_dtb, "imx6ul-isiot-emmc"))
env_set("fdt_file", "imx6ul-isiot-emmc.dtb");
else if (!strcmp(cmp_dtb, "imx6ul-isiot-nand"))
diff --git a/board/freescale/imx8qm_mek/imx8qm_mek.c b/board/freescale/imx8qm_mek/imx8qm_mek.c
index e69efc4dd6..b7a609b097 100644
--- a/board/freescale/imx8qm_mek/imx8qm_mek.c
+++ b/board/freescale/imx8qm_mek/imx8qm_mek.c
@@ -34,21 +34,11 @@ static void setup_iomux_uart(void)
int board_early_init_f(void)
{
+ sc_pm_clock_rate_t rate = SC_80MHZ;
int ret;
- /* Set UART0 clock root to 80 MHz */
- sc_pm_clock_rate_t rate = 80000000;
-
- /* Power up UART0 */
- ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
- if (ret)
- return ret;
- ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
- if (ret)
- return ret;
-
- /* Enable UART0 clock root */
- ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+ /* Set UART0 clock root to 80 MHz */
+ ret = sc_pm_setup_uart(SC_R_UART_0, rate);
if (ret)
return ret;
@@ -88,19 +78,6 @@ int board_phy_config(struct phy_device *phydev)
}
#endif
-void build_info(void)
-{
- u32 sc_build = 0, sc_commit = 0;
-
- /* Get SCFW build and commit id */
- sc_misc_build_info(-1, &sc_build, &sc_commit);
- if (!sc_build) {
- printf("SCFW does not support build info\n");
- sc_commit = 0; /* Display 0 when the build info is not supported*/
- }
- printf("Build: SCFW %x\n", sc_commit);
-}
-
int checkboard(void)
{
puts("Board: iMX8QM MEK\n");
diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
index 120731422c..3cf73e1ab6 100644
--- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
+++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
@@ -40,21 +40,11 @@ static void setup_iomux_uart(void)
int board_early_init_f(void)
{
+ sc_pm_clock_rate_t rate = SC_80MHZ;
int ret;
- /* Set UART0 clock root to 80 MHz */
- sc_pm_clock_rate_t rate = 80000000;
-
- /* Power up UART0 */
- ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
- if (ret)
- return ret;
- ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
- if (ret)
- return ret;
-
- /* Enable UART0 clock root */
- ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+ /* Set UART0 clock root to 80 MHz */
+ ret = sc_pm_setup_uart(SC_R_UART_0, rate);
if (ret)
return ret;
@@ -104,19 +94,6 @@ int board_phy_config(struct phy_device *phydev)
}
#endif
-void build_info(void)
-{
- u32 sc_build = 0, sc_commit = 0;
-
- /* Get SCFW build and commit id */
- sc_misc_build_info(-1, &sc_build, &sc_commit);
- if (!sc_build) {
- printf("SCFW does not support build info\n");
- sc_commit = 0; /* Display 0 when the build info is not supported */
- }
- printf("Build: SCFW %x\n", sc_commit);
-}
-
int checkboard(void)
{
puts("Board: iMX8QXP MEK\n");
diff --git a/board/freescale/mx6sxsabresd/imximage.cfg b/board/freescale/mx6sxsabresd/imximage.cfg
index 3e94f6ab66..0354bb36e2 100644
--- a/board/freescale/mx6sxsabresd/imximage.cfg
+++ b/board/freescale/mx6sxsabresd/imximage.cfg
@@ -18,6 +18,13 @@ IMAGE_VERSION 2
BOOT_FROM sd
/*
+ * Secure boot support
+ */
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
diff --git a/board/freescale/mx7ulp_evk/imximage.cfg b/board/freescale/mx7ulp_evk/imximage.cfg
index a6e18d9440..43ebc23091 100644
--- a/board/freescale/mx7ulp_evk/imximage.cfg
+++ b/board/freescale/mx7ulp_evk/imximage.cfg
@@ -45,12 +45,12 @@ DATA 4 0x403f00dc 0x00000000
DATA 4 0x403e0040 0x01000020
DATA 4 0x403e0500 0x01000000
DATA 4 0x403e050c 0x80808080
-DATA 4 0x403e0508 0x00140000
-DATA 4 0x403E0510 0x00000004
-DATA 4 0x403E0514 0x00000002
+DATA 4 0x403e0508 0x00160002
+DATA 4 0x403E0510 0x00000001
+DATA 4 0x403E0514 0x00000014
DATA 4 0x403e0500 0x00000001
CHECK_BITS_SET 4 0x403e0500 0x01000000
-DATA 4 0x403e050c 0x8080801E
+DATA 4 0x403e050c 0x8080801B
CHECK_BITS_SET 4 0x403e050c 0x00000040
DATA 4 0x403E0030 0x00000001
DATA 4 0x403e0040 0x11000020
@@ -94,11 +94,6 @@ DATA 4 0x40AB0820 0x33333333
DATA 4 0x40AB0824 0x33333333
DATA 4 0x40AB0828 0x33333333
-DATA 4 0x40AB082C 0xf3333333
-DATA 4 0x40AB0830 0xf3333333
-DATA 4 0x40AB0834 0xf3333333
-DATA 4 0x40AB0838 0xf3333333
-
DATA 4 0x40AB08C0 0x24922492
DATA 4 0x40AB08B8 0x00000800
@@ -113,8 +108,8 @@ DATA 4 0x40AB0030 0x009F0E10
DATA 4 0x40AB0040 0x0000003F
DATA 4 0x40AB0000 0xC3190000
-DATA 4 0x40AB001C 0x00008050
-DATA 4 0x40AB001C 0x00008058
+DATA 4 0x40AB001C 0x00008010
+DATA 4 0x40AB001C 0x00008018
DATA 4 0x40AB001C 0x003F8030
DATA 4 0x40AB001C 0x003F8038
DATA 4 0x40AB001C 0xFF0A8030
diff --git a/board/freescale/mx7ulp_evk/plugin.S b/board/freescale/mx7ulp_evk/plugin.S
index 082b2beaa3..2cc93dbdd5 100644
--- a/board/freescale/mx7ulp_evk/plugin.S
+++ b/board/freescale/mx7ulp_evk/plugin.S
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
*/
#include <config.h>
@@ -15,13 +16,14 @@
str r3, [r2, #0x40]
ldr r3, =0x01000000
str r3, [r2, #0x500]
+
ldr r3, =0x80808080
str r3, [r2, #0x50c]
- ldr r3, =0x00140000
+ ldr r3, =0x00160002
str r3, [r2, #0x508]
- ldr r3, =0x00000004
+ ldr r3, =0x00000001
str r3, [r2, #0x510]
- ldr r3, =0x00000002
+ ldr r3, =0x00000014
str r3, [r2, #0x514]
ldr r3, =0x00000001
str r3, [r2, #0x500]
@@ -33,7 +35,7 @@ wait1:
cmp r4, r3
bne wait1
- ldr r3, =0x8080801E
+ ldr r3, =0x8080801B
str r3, [r2, #0x50c]
ldr r3, =0x00000040
@@ -132,15 +134,6 @@ wait2:
ldr r1, =0x33333333
str r1, [r0, #0x828]
- ldr r1, =0xf3333333
- str r1, [r0, #0x82c]
- ldr r1, =0xf3333333
- str r1, [r0, #0x830]
- ldr r1, =0xf3333333
- str r1, [r0, #0x834]
- ldr r1, =0xf3333333
- str r1, [r0, #0x838]
-
ldr r1, =0x24922492
str r1, [r0, #0x8c0]
ldr r1, =0x00000800
@@ -168,9 +161,9 @@ wait2:
ldr r1, =0xC3190000
str r1, [r0, #0x0]
- ldr r1, =0x00008050
+ ldr r1, =0x00008010
str r1, [r0, #0x1c]
- ldr r1, =0x00008058
+ ldr r1, =0x00008018
str r1, [r0, #0x1c]
ldr r1, =0x003F8030
str r1, [r0, #0x1c]
diff --git a/board/liebherr/display5/common.c b/board/liebherr/display5/common.c
index 7b89d16970..8390d9a0f3 100644
--- a/board/liebherr/display5/common.c
+++ b/board/liebherr/display5/common.c
@@ -68,7 +68,7 @@ iomux_v3_cfg_t const ecspi2_pads[] = {
int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
{
- if (bus != 1 || cs != (IMX_GPIO_NR(5, 29) << 8))
+ if (bus != 1 || cs != 0)
return -EINVAL;
return IMX_GPIO_NR(5, 29);
diff --git a/board/liebherr/display5/display5.c b/board/liebherr/display5/display5.c
index 6b7ff0acb6..ea49b7197f 100644
--- a/board/liebherr/display5/display5.c
+++ b/board/liebherr/display5/display5.c
@@ -413,12 +413,3 @@ int misc_init_r(void)
return 0;
}
-
-static struct mxc_serial_platdata mxc_serial_plat = {
- .reg = (struct mxc_uart *)UART5_BASE,
-};
-
-U_BOOT_DEVICE(mxc_serial) = {
- .name = "serial_mxc",
- .platdata = &mxc_serial_plat,
-};
diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c
index e48b3beb16..6e3ffa72d7 100644
--- a/board/logicpd/imx6/imx6logic.c
+++ b/board/logicpd/imx6/imx6logic.c
@@ -223,25 +223,15 @@ int board_mmc_init(bd_t *bis)
switch (reg) {
case 0:
SETUP_IOMUX_PADS(usdhc1_pads);
- usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
break;
case 1:
SETUP_IOMUX_PADS(usdhc2_pads);
- usdhc_cfg[1].esdhc_base = USDHC2_BASE_ADDR;
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- gd->arch.sdhc_clk = usdhc_cfg[1].sdhc_clk;
break;
}
- return fsl_esdhc_initialize(bis, &usdhc_cfg[reg]);
+ return 0;
}
-int board_mmc_getcd(struct mmc *mmc)
-{
- return 1;
-}
#endif
static void ccgr_init(void)
diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c
index e3d75e549a..216475c8de 100644
--- a/board/technexion/pico-imx7d/pico-imx7d.c
+++ b/board/technexion/pico-imx7d/pico-imx7d.c
@@ -16,7 +16,6 @@
#include <i2c.h>
#include <miiphy.h>
#include <netdev.h>
-#include <usb.h>
#include <power/pmic.h>
#include <power/pfuze3000_pmic.h>
#include "../../freescale/common/pfuze.h"
@@ -328,15 +327,3 @@ int board_ehci_hcd_init(int port)
return 0;
}
-int board_usb_phy_mode(int port)
-{
- switch (port) {
- case 0:
- return USB_INIT_DEVICE;
- case 1:
- return USB_INIT_HOST;
- default:
- return -EINVAL;
- }
- return 0;
-}
diff --git a/board/toradex/apalis-imx8/apalis-imx8.c b/board/toradex/apalis-imx8/apalis-imx8.c
index f516e546a8..5433c7581b 100644
--- a/board/toradex/apalis-imx8/apalis-imx8.c
+++ b/board/toradex/apalis-imx8/apalis-imx8.c
@@ -37,22 +37,11 @@ static void setup_iomux_uart(void)
int board_early_init_f(void)
{
- sc_pm_clock_rate_t rate;
+ sc_pm_clock_rate_t rate = SC_80MHZ;
sc_err_t err = 0;
- /* Power up UART1 */
- err = sc_pm_set_resource_power_mode(-1, SC_R_UART_1, SC_PM_PW_MODE_ON);
- if (err != SC_ERR_NONE)
- return 0;
-
- /* Set UART3 clock root to 80 MHz */
- rate = 80000000;
- err = sc_pm_set_clock_rate(-1, SC_R_UART_1, SC_PM_CLK_PER, &rate);
- if (err != SC_ERR_NONE)
- return 0;
-
- /* Enable UART1 clock root */
- err = sc_pm_clock_enable(-1, SC_R_UART_1, SC_PM_CLK_PER, true, false);
+ /* Set UART1 clock root to 80 MHz and enable it */
+ err = sc_pm_setup_uart(SC_R_UART_1, rate);
if (err != SC_ERR_NONE)
return 0;
@@ -82,19 +71,6 @@ int board_phy_config(struct phy_device *phydev)
}
#endif
-void build_info(void)
-{
- u32 sc_build = 0, sc_commit = 0;
-
- /* Get SCFW build and commit id */
- sc_misc_build_info(-1, &sc_build, &sc_commit);
- if (!sc_build) {
- printf("SCFW does not support build info\n");
- sc_commit = 0; /* Display 0 if build info not supported */
- }
- printf("Build: SCFW %x\n", sc_commit);
-}
-
int checkboard(void)
{
puts("Model: Toradex Apalis iMX8\n");
diff --git a/board/toradex/colibri-imx8x/colibri-imx8x.c b/board/toradex/colibri-imx8x/colibri-imx8x.c
index aa8eaa0ea1..8c725b7593 100644
--- a/board/toradex/colibri-imx8x/colibri-imx8x.c
+++ b/board/toradex/colibri-imx8x/colibri-imx8x.c
@@ -51,19 +51,9 @@ int board_early_init_f(void)
if (err != SC_ERR_NONE)
return 0;
- /* Power up UART3 */
- err = sc_pm_set_resource_power_mode(-1, SC_R_UART_3, SC_PM_PW_MODE_ON);
- if (err != SC_ERR_NONE)
- return 0;
-
- /* Set UART3 clock root to 80 MHz */
- rate = 80000000;
- err = sc_pm_set_clock_rate(-1, SC_R_UART_3, SC_PM_CLK_PER, &rate);
- if (err != SC_ERR_NONE)
- return 0;
-
- /* Enable UART3 clock root */
- err = sc_pm_clock_enable(-1, SC_R_UART_3, SC_PM_CLK_PER, true, false);
+ /* Set UART3 clock root to 80 MHz and enable it */
+ rate = SC_80MHZ;
+ err = sc_pm_setup_uart(SC_R_UART_3, rate);
if (err != SC_ERR_NONE)
return 0;
@@ -93,19 +83,6 @@ int board_phy_config(struct phy_device *phydev)
}
#endif
-void build_info(void)
-{
- u32 sc_build = 0, sc_commit = 0;
-
- /* Get SCFW build and commit id */
- sc_misc_build_info(-1, &sc_build, &sc_commit);
- if (!sc_build) {
- printf("SCFW does not support build info\n");
- sc_commit = 0; /* Display 0 if build info not supported */
- }
- printf("Build: SCFW %x\n", sc_commit);
-}
-
int checkboard(void)
{
puts("Model: Toradex Colibri iMX8X\n");
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index f69c4433b2..c19d7611c2 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -7,8 +7,9 @@
#include "tdx-cfg-block.h"
#if defined(CONFIG_TARGET_APALIS_IMX6) || \
+ defined(CONFIG_TARGET_APALIS_IMX8) || \
defined(CONFIG_TARGET_COLIBRI_IMX6) || \
- defined(CONFIG_TARGET_COLIBRI_IMX8QXP)
+ defined(CONFIG_TARGET_COLIBRI_IMX8X)
#include <asm/arch/sys_proto.h>
#else
#define is_cpu_type(cpu) (0)
@@ -129,6 +130,10 @@ static int tdx_cfg_block_mmc_storage(u8 *config_block, int write)
ret = -ENODEV;
goto out;
}
+ if (mmc_init(mmc)) {
+ puts("MMC init failed\n");
+ return -EINVAL;
+ }
if (part != mmc_get_blk_desc(mmc)->hwpart) {
if (blk_select_hwpart_devnum(IF_TYPE_MMC, dev, part)) {
puts("MMC partition switch failed\n");
@@ -287,6 +292,7 @@ static int get_cfgblock_interactive(void)
char message[CONFIG_SYS_CBSIZE];
char *soc;
char it = 'n';
+ char wb = 'n';
int len;
/* Unknown module by default */
@@ -296,10 +302,17 @@ static int get_cfgblock_interactive(void)
sprintf(message, "Is the module the 312 MHz version? [y/N] ");
else
sprintf(message, "Is the module an IT version? [y/N] ");
-
len = cli_readline(message);
it = console_buffer[0];
+#if defined(CONFIG_TARGET_APALIS_IMX8) || \
+ defined(CONFIG_TARGET_COLIBRI_IMX6ULL) || \
+ defined(CONFIG_TARGET_COLIBRI_IMX8X)
+ sprintf(message, "Does the module have Wi-Fi / Bluetooth? [y/N] ");
+ len = cli_readline(message);
+ wb = console_buffer[0];
+#endif
+
soc = env_get("soc");
if (!strcmp("mx6", soc)) {
#ifdef CONFIG_TARGET_APALIS_IMX6
@@ -327,12 +340,6 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.prodid = COLIBRI_IMX6S;
}
#elif CONFIG_TARGET_COLIBRI_IMX6ULL
- char wb = 'n';
-
- sprintf(message, "Does the module have Wi-Fi / Bluetooth? " \
- "[y/N] ");
- len = cli_readline(message);
- wb = console_buffer[0];
if (it == 'y' || it == 'Y') {
if (wb == 'y' || wb == 'Y')
tdx_hw_tag.prodid = COLIBRI_IMX6ULL_WIFI_BT_IT;
@@ -349,9 +356,31 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.prodid = COLIBRI_IMX7D;
else if (!strcmp("imx7s", soc))
tdx_hw_tag.prodid = COLIBRI_IMX7S;
- else if (is_cpu_type(MXC_CPU_IMX8QXP))
- tdx_hw_tag.prodid = COLIBRI_IMX8QXP_WIFI_BT_IT;
- else if (!strcmp("tegra20", soc)) {
+ else if (is_cpu_type(MXC_CPU_IMX8QM)) {
+ if (it == 'y' || it == 'Y') {
+ if (wb == 'y' || wb == 'Y')
+ tdx_hw_tag.prodid = APALIS_IMX8QM_WIFI_BT_IT;
+ else
+ tdx_hw_tag.prodid = APALIS_IMX8QM_IT;
+ } else {
+ if (wb == 'y' || wb == 'Y')
+ tdx_hw_tag.prodid = APALIS_IMX8QP_WIFI_BT;
+ else
+ tdx_hw_tag.prodid = APALIS_IMX8QP;
+ }
+ } else if (is_cpu_type(MXC_CPU_IMX8QXP)) {
+ if (it == 'y' || it == 'Y') {
+ if (wb == 'y' || wb == 'Y')
+ tdx_hw_tag.prodid = COLIBRI_IMX8QXP_WIFI_BT_IT;
+ else
+ tdx_hw_tag.prodid = COLIBRI_IMX8QXP_IT;
+ } else {
+ if (wb == 'y' || wb == 'Y')
+ tdx_hw_tag.prodid = COLIBRI_IMX8DX_WIFI_BT;
+ else
+ tdx_hw_tag.prodid = COLIBRI_IMX8DX;
+ }
+ } else if (!strcmp("tegra20", soc)) {
if (it == 'y' || it == 'Y')
if (gd->ram_size == 0x10000000)
tdx_hw_tag.prodid = COLIBRI_T20_256MB_IT;
@@ -482,8 +511,7 @@ static int do_cfgblock_create(cmd_tbl_t *cmdtp, int flag, int argc,
* On NAND devices, recreation is only allowed if the page is
* empty (config block invalid...)
*/
- printf("NAND erase block %d need to be erased before creating" \
- " a Toradex config block\n",
+ printf("NAND erase block %d need to be erased before creating a Toradex config block\n",
CONFIG_TDX_CFG_BLOCK_OFFSET /
get_nand_dev_by_index(0)->erasesize);
goto out;
@@ -492,8 +520,7 @@ static int do_cfgblock_create(cmd_tbl_t *cmdtp, int flag, int argc,
* On NOR devices, recreation is only allowed if the sector is
* empty and write protection is off (config block invalid...)
*/
- printf("NOR sector at offset 0x%02x need to be erased and " \
- "unprotected before creating a Toradex config block\n",
+ printf("NOR sector at offset 0x%02x need to be erased and unprotected before creating a Toradex config block\n",
CONFIG_TDX_CFG_BLOCK_OFFSET);
goto out;
#else
@@ -604,9 +631,8 @@ static int do_cfgblock(cmd_tbl_t *cmdtp, int flag, int argc,
return CMD_RET_USAGE;
}
-U_BOOT_CMD(
- cfgblock, 4, 0, do_cfgblock,
- "Toradex config block handling commands",
- "create [-y] [barcode] - (Re-)create Toradex config block\n"
- "cfgblock reload - Reload Toradex config block from flash"
+U_BOOT_CMD(cfgblock, 4, 0, do_cfgblock,
+ "Toradex config block handling commands",
+ "create [-y] [barcode] - (Re-)create Toradex config block\n"
+ "cfgblock reload - Reload Toradex config block from flash"
);
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 9e66cc110d..16cb5c2956 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -325,8 +325,8 @@ config CMD_SPL
command.
config CMD_SPL_NAND_OFS
- hex "Offset of OS command line args for Falcon-mode NAND boot"
- depends on CMD_SPL
+ hex "Offset of OS args or dtb for Falcon-mode NAND boot"
+ depends on CMD_SPL && (TPL_NAND_SUPPORT || SPL_NAND_SUPPORT)
default 0
help
This provides the offset of the command line arguments for Linux
@@ -334,6 +334,14 @@ config CMD_SPL_NAND_OFS
for full information about how to use this option (and also see
board/gateworks/gw_ventana/README for an example).
+config CMD_SPL_NOR_OFS
+ hex "Offset of OS args or dtb for Falcon-mode NOR boot"
+ depends on CMD_SPL && SPL_NOR_SUPPORT
+ default 0
+ help
+ This provides the offset of the command line arguments or dtb for
+ Linux when booting from NOR in Falcon mode.
+
config CMD_SPL_WRITE_SIZE
hex "Size of argument area"
depends on CMD_SPL
diff --git a/cmd/eeprom.c b/cmd/eeprom.c
index 7b1f81477f..19953df082 100644
--- a/cmd/eeprom.c
+++ b/cmd/eeprom.c
@@ -108,7 +108,7 @@ static int eeprom_len(unsigned offset, unsigned end)
/*
* For a FRAM device there is no limit on the number of the
- * bytes that can be ccessed with the single read or write
+ * bytes that can be accessed with the single read or write
* operation.
*/
#if !defined(CONFIG_SYS_I2C_FRAM)
diff --git a/common/board_r.c b/common/board_r.c
index abc31b17b8..ee4dcedd5f 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -700,7 +700,7 @@ static init_fnc_t init_sequence_r[] = {
stdio_init_tables,
initr_serial,
initr_announce,
-#if defined(CONFIG_WDT)
+#if CONFIG_IS_ENABLED(WDT)
initr_watchdog,
#endif
INIT_FUNC_WATCHDOG_RESET
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 5d6da5db89..54154b93c9 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1075,6 +1075,7 @@ endif
config SPL_WATCHDOG_SUPPORT
bool "Support watchdog drivers"
+ imply SPL_WDT if !HW_WATCHDOG
help
Enable support for watchdog drivers in SPL. A watchdog is
typically a hardware peripheral which can reset the system when it
diff --git a/common/spl/spl.c b/common/spl/spl.c
index d5e3f680f4..c182705b3f 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -603,7 +603,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
spl_board_init();
#endif
-#if defined(CONFIG_SPL_WATCHDOG_SUPPORT) && defined(CONFIG_WDT)
+#if defined(CONFIG_SPL_WATCHDOG_SUPPORT) && CONFIG_IS_ENABLED(WDT)
initr_watchdog();
#endif
diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index cad3f1a69c..b76c4c1b85 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -37,7 +37,6 @@ CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
@@ -56,7 +55,6 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_BLOCKSIZE=4096
CONFIG_DWC_AHSATA=y
-CONFIG_DFU_MMC=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig
index 49dd9bb755..33e40cd7d3 100644
--- a/configs/aristainetos2_defconfig
+++ b/configs/aristainetos2_defconfig
@@ -50,6 +50,7 @@ CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
+CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
diff --git a/configs/aristainetos2b_defconfig b/configs/aristainetos2b_defconfig
index 06c05f7e22..34a6cde1ee 100644
--- a/configs/aristainetos2b_defconfig
+++ b/configs/aristainetos2b_defconfig
@@ -48,6 +48,7 @@ CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_MII=y
+CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
diff --git a/configs/aristainetos_defconfig b/configs/aristainetos_defconfig
index e645055afa..cb361daafb 100644
--- a/configs/aristainetos_defconfig
+++ b/configs/aristainetos_defconfig
@@ -49,6 +49,7 @@ CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_MII=y
+CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index c28a167f5b..2b57b5e41e 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -47,7 +47,6 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_BLOCKSIZE=16352
-CONFIG_DFU_MMC=y
CONFIG_DFU_NAND=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index b343178b9c..f792a9ef5c 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -36,7 +36,6 @@ CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
-CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
@@ -55,7 +54,6 @@ CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_BLOCKSIZE=16352
-CONFIG_DFU_MMC=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig
index aaab4c82f0..0c3a898aab 100644
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@@ -24,10 +24,9 @@ CONFIG_SYS_PROMPT="Colibri iMX7 # "
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_DFU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
-# CONFIG_RANDOM_UUID is not set
+CONFIG_RANDOM_UUID=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
@@ -43,13 +42,13 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_IP_DEFRAG=y
CONFIG_TFTP_BLOCKSIZE=16352
CONFIG_FSL_CAAM=y
-CONFIG_DFU_MMC=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_BUF_SIZE=0x10000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig
index 3b24dd326e..3022a187cc 100644
--- a/configs/dh_imx6_defconfig
+++ b/configs/dh_imx6_defconfig
@@ -16,13 +16,13 @@ CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
+CONFIG_SPL_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_BOOTDELAY=3
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_BOUNCE_BUFFER=y
CONFIG_SPL_TEXT_BASE=0x00908000
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_CMD_MEMTEST=y
@@ -41,10 +41,16 @@ CONFIG_CMD_TIME=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-dhcom-pdk2"
+CONFIG_OF_LIST="imx6q-dhcom-pdk2 imx6dl-dhcom-pdk2"
+CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DWC_AHSATA=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_DM_SPI_FLASH=y
@@ -64,6 +70,8 @@ CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_SCSI=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
diff --git a/configs/display5_defconfig b/configs/display5_defconfig
index 938414c3dd..2275ee7d1b 100644
--- a/configs/display5_defconfig
+++ b/configs/display5_defconfig
@@ -4,16 +4,19 @@ CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x1000
CONFIG_MX6_DDRCAL=y
CONFIG_TARGET_DISPLAY5=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_BOARD_SETUP=y
diff --git a/configs/dms-ba16-1g_defconfig b/configs/dms-ba16-1g_defconfig
index 4231adb6a7..91b6a7424f 100644
--- a/configs/dms-ba16-1g_defconfig
+++ b/configs/dms-ba16-1g_defconfig
@@ -41,6 +41,7 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHYLIB=y
CONFIG_MII=y
+CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
diff --git a/configs/dms-ba16_defconfig b/configs/dms-ba16_defconfig
index f98088deb7..fbf1f89ece 100644
--- a/configs/dms-ba16_defconfig
+++ b/configs/dms-ba16_defconfig
@@ -40,6 +40,7 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_PHYLIB=y
CONFIG_MII=y
+CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_USB=y
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index 60bdcd67a0..54197f7541 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -55,6 +55,7 @@ CONFIG_CMD_E1000=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_PWM_IMX=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
index cf6964bd9a..b95c9783a4 100644
--- a/configs/imx6q_logic_defconfig
+++ b/configs/imx6q_logic_defconfig
@@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_MX6LOGICPD=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
@@ -54,12 +55,16 @@ CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),16m(kernel),1m(dtb),-(fs)"
CONFIG_CMD_UBI=y
+CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-logicpd"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_ENV_FAT_INTERFACE="mmc"
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_OF_TRANSLATE=y
CONFIG_PCF8575_GPIO=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
@@ -82,6 +87,7 @@ CONFIG_DM_REGULATOR_GPIO=y
CONFIG_MXC_UART=y
CONFIG_USB=y
CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index b15c547e37..353582a6c7 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -14,6 +14,7 @@ CONFIG_DEBUG_UART_BASE=0x021f0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_LIBDISK_SUPPORT=y
# CONFIG_CMD_BMODE is not set
+CONFIG_CMD_NANDBCB=y
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig
index 4ea0803ab5..4672563ff9 100644
--- a/configs/imx6qdl_icore_nand_defconfig
+++ b/configs/imx6qdl_icore_nand_defconfig
@@ -8,6 +8,7 @@ CONFIG_TARGET_MX6Q_ENGICAM=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
# CONFIG_CMD_BMODE is not set
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index 39e5f5e71d..cf83a671f7 100644
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -78,5 +78,7 @@ CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPL_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_SCU_THERMAL=y
CONFIG_SPL_TINY_MEMSET=y
# CONFIG_EFI_LOADER is not set
diff --git a/configs/kp_imx53_defconfig b/configs/kp_imx53_defconfig
index 86d672784c..ea6f8f6d31 100644
--- a/configs/kp_imx53_defconfig
+++ b/configs/kp_imx53_defconfig
@@ -47,3 +47,5 @@ CONFIG_MXC_UART=y
CONFIG_USB=y
CONFIG_USB_EHCI_MX5=y
CONFIG_USB_STORAGE=y
+CONFIG_HEXDUMP=y
+# CONFIG_EFI_LOADER is not set
diff --git a/configs/m53menlo_defconfig b/configs/m53menlo_defconfig
index 3a5fa26bcd..c551ea2daa 100644
--- a/configs/m53menlo_defconfig
+++ b/configs/m53menlo_defconfig
@@ -72,6 +72,8 @@ CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_RTC_M41T62=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_MX5=y
diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig
index 781620048d..cd78c5cb33 100644
--- a/configs/mccmon6_nor_defconfig
+++ b/configs/mccmon6_nor_defconfig
@@ -20,7 +20,6 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
@@ -50,5 +49,4 @@ CONFIG_MII=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y
-CONFIG_USB=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig
index 522207afca..17947860ee 100644
--- a/configs/mccmon6_sd_defconfig
+++ b/configs/mccmon6_sd_defconfig
@@ -21,7 +21,6 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
@@ -51,5 +50,4 @@ CONFIG_MII=y
CONFIG_SPI=y
CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y
-CONFIG_USB=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/mt7629_rfb_defconfig b/configs/mt7629_rfb_defconfig
index d6a7c84df3..c0a586f248 100644
--- a/configs/mt7629_rfb_defconfig
+++ b/configs/mt7629_rfb_defconfig
@@ -64,7 +64,7 @@ CONFIG_DM_SERIAL=y
CONFIG_MTK_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
-CONFIG_MTK_QSPI=y
+CONFIG_MTK_SNFI_SPI=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
CONFIG_SYSRESET_WATCHDOG=y
diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig
index a88af15760..cad798a416 100644
--- a/configs/mx53ppd_defconfig
+++ b/configs/mx53ppd_defconfig
@@ -43,6 +43,7 @@ CONFIG_FSL_ESDHC_IMX=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX5=y
+CONFIG_PWM_IMX=y
CONFIG_RTC_S35392A=y
CONFIG_USB=y
CONFIG_USB_EHCI_MX5=y
diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig
index bc34e995e3..263f8f29a0 100644
--- a/configs/pico-hobbit-imx7d_defconfig
+++ b/configs/pico-hobbit-imx7d_defconfig
@@ -51,6 +51,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_PHYLIB=y
diff --git a/configs/pico-imx7d_bl33_defconfig b/configs/pico-imx7d_bl33_defconfig
index b609b6d7b9..7c559cfec4 100644
--- a/configs/pico-imx7d_bl33_defconfig
+++ b/configs/pico-imx7d_bl33_defconfig
@@ -43,6 +43,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DFU_MMC=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_PHYLIB=y
CONFIG_MII=y
diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig
index f23bbf7814..09b81e485e 100644
--- a/configs/pico-imx7d_defconfig
+++ b/configs/pico-imx7d_defconfig
@@ -51,6 +51,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_PHYLIB=y
diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig
index 14c0817127..7689242716 100644
--- a/configs/pico-pi-imx7d_defconfig
+++ b/configs/pico-pi-imx7d_defconfig
@@ -51,6 +51,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
CONFIG_DM_GPIO=y
CONFIG_DM_MMC=y
+CONFIG_DM_USB=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_PHYLIB=y
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 11cc097cd5..62594e3c21 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -93,6 +93,7 @@ CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DM_BOOTCOUNT=y
CONFIG_DM_BOOTCOUNT_RTC=y
CONFIG_CLK=y
+CONFIG_SANDBOX_CLK_CCF=y
CONFIG_CPU=y
CONFIG_DM_DEMO=y
CONFIG_DM_DEMO_SIMPLE=y
diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig
index af335285c9..2429ae4621 100644
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@@ -66,6 +66,7 @@ CONFIG_DEBUG_DEVRES=y
CONFIG_ADC=y
CONFIG_ADC_SANDBOX=y
CONFIG_CLK=y
+CONFIG_SANDBOX_CLK_CCF=y
CONFIG_CPU=y
CONFIG_DM_DEMO=y
CONFIG_DM_DEMO_SIMPLE=y
diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig
index 7364c67cd7..6b9691ad3e 100644
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@@ -45,6 +45,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_PHYLIB=y
CONFIG_MII=y
+CONFIG_PWM_IMX=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_PINCTRL=y
diff --git a/configs/warp7_bl33_defconfig b/configs/warp7_bl33_defconfig
index 8a4e29419c..0f28d5881d 100644
--- a/configs/warp7_bl33_defconfig
+++ b/configs/warp7_bl33_defconfig
@@ -54,4 +54,11 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_ETHER=y
CONFIG_USB_ETH_CDC=y
CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
-CONFIG_OPTEE_TZDRAM_SIZE=0x2000000
+CONFIG_OPTEE=y
+CONFIG_OPTEE_TZDRAM_BASE=0x9e000000
+CONFIG_OPTEE_TZDRAM_SIZE=0x02000000
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_LIBFDT=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/doc/README.falcon b/doc/README.falcon
index 9a7f0bc235..713d7063a1 100644
--- a/doc/README.falcon
+++ b/doc/README.falcon
@@ -67,6 +67,8 @@ CONFIG_SYS_NAND_SPL_KERNEL_OFFS Offset in NAND where the kernel is stored
CONFIG_CMD_SPL_NAND_OFS Offset in NAND where the parameters area was saved.
+CONFIG_CMD_SPL_NOR_OFS Offset in NOR where the parameters area was saved.
+
CONFIG_CMD_SPL_WRITE_SIZE Size of the parameters area to be copied
CONFIG_SPL_OS_BOOT Activate Falcon Mode.
diff --git a/doc/imx/clk/ccf.txt b/doc/imx/clk/ccf.txt
new file mode 100644
index 0000000000..36b60dc438
--- /dev/null
+++ b/doc/imx/clk/ccf.txt
@@ -0,0 +1,101 @@
+Introduction:
+=============
+
+This documentation entry describes the Common Clock Framework [CCF]
+port from Linux kernel (v5.1.12) to U-Boot.
+
+This code is supposed to bring CCF to IMX based devices (imx6q, imx7
+imx8). Moreover, it also provides some common clock code, which would
+allow easy porting of CCF Linux code to other platforms.
+
+Design decisions:
+=================
+
+* U-Boot's driver model [DM] for clk differs from Linux CCF. The most
+ notably difference is the lack of support for hierarchical clocks and
+ "clock as a manager driver" (single clock DTS node acts as a starting
+ point for all other clocks).
+
+* The clk_get_rate() caches the previously read data if CLK_GET_RATE_NOCACHE
+ is not set (no need for recursive access).
+
+* On purpose the "manager" clk driver (clk-imx6q.c) is not using large
+ table to store pointers to clocks - e.g. clk[IMX6QDL_CLK_USDHC2_SEL] = ....
+ Instead we use udevice's linked list for the same class (UCLASS_CLK).
+
+ Rationale:
+ ----------
+ When porting the code as is from Linux, one would need ~1KiB of RAM to
+ store it. This is way too much if we do plan to use this driver in SPL.
+
+* The "central" structure of this patch series is struct udevice and its
+ uclass_priv field contains the struct clk pointer (to the originally created
+ one).
+
+* Up till now U-Boot's driver model (DM) CLK operates on udevice (main
+ access to clock is by udevice ops)
+ In the CCF the access to struct clk (embodying pointer to *dev) is
+ possible via dev_get_clk_ptr() (it is a wrapper on dev_get_uclass_priv()).
+
+* To keep things simple the struct udevice's uclass_priv pointer is used to
+ store back pointer to corresponding struct clk. However, it is possible to
+ modify clk-uclass.c file and add there struct uc_clk_priv, which would have
+ clock related members (like pointer to clk). As of this writing there is no
+ such need, so to avoid extra allocations (as it can be auto allocated by
+ setting .per_device_auto_alloc_size = sizeof(struct uc_clk_priv)) the
+ uclass_priv stores the pointer to struct clk.
+
+* It is advised to add common clock code (like already added rate and flags) to
+ the struct clk, which is a top level description of the clock.
+
+* U-Boot's driver model already provides the facility to automatically allocate
+ (via private_alloc_size) device private data (accessible via dev->priv).
+ It may look appealing to use this feature to allocate private structures for
+ CCF clk devices e.g. divider (struct clk_divider *divider) for IMX6Q clock.
+
+ The above feature had not been used for following reasons:
+ - The original CCF Linux kernel driver is the "manager" for clocks - it
+ decides when clock is instantiated (and when memory for it is allocated).
+
+ - Using it would change the original structure of the CCF code.
+
+ - To bind (via clk_register()) the clock device with U-Boot driver model we
+ first need udevice for it (the "chicken and egg problem").
+
+* I've added the clk_get_parent(), which reads parent's dev->uclass_priv to
+ provide parent's struct clk pointer. This seems the easiest way to get
+ child/parent relationship for struct clk in U-Boot's udevice based clocks.
+
+* Linux's CCF 'struct clk_core' corresponds to U-Boot's udevice in 'struct clk'.
+ Clock IP block agnostic flags from 'struct clk_core' (e.g. NOCACHE) have been
+ moved from this struct one level up to 'struct clk'.
+
+* For tests the new ./test/dm/clk_ccf.c and ./drivers/clk/clk_sandbox_ccf.c
+ files have been introduced. The latter setups the CCF clock structure for
+ sandbox by reusing, if possible, generic clock primitives - like divier
+ and mux. The former file provides code to tests this setup.
+
+ For sandbox new CONFIG_SANDBOX_CLK_CCF Kconfig define has been introduced.
+ All new primitives added for new architectures must have corresponding test
+ in the two aforementioned files.
+
+
+Testing (sandbox):
+==================
+
+make mrproper; make sandbox_defconfig; make -j4
+./u-boot -i -d arch/sandbox/dts/test.dtb
+=> ut dm clk
+
+or in a more "scriptable" way (with -v to print debug output):
+./u-boot --fdt arch/sandbox/dts/test.dtb --command "ut dm clk_ccf" -v
+
+To do:
+------
+
+* Use of OF_PLATDATA in the SPL setup for CCF - as it is now - the SPL grows
+ considerably and using CCF in boards with tiny resources (OCRAM) is
+ problematic.
+
+* On demand port other parts of CCF to U-Boot - as now only features _really_
+ needed by DM/DTS converted drivers are used.
diff --git a/doc/imx/common/imx6.txt b/doc/imx/common/imx6.txt
index eab88353f6..0b5061128c 100644
--- a/doc/imx/common/imx6.txt
+++ b/doc/imx/common/imx6.txt
@@ -88,3 +88,77 @@ Reading bank 4:
Word 0x00000002: 9f027772 00000004
+NAND Boot on i.MX6 with SPL support
+--------------------------------------
+
+Writing/updating boot image in nand device is not straight forward in
+i.MX6 platform and it requires boot control block(BCB) to be configured.
+
+BCB contains two data structures, Firmware Configuration Block(FCB) and
+Discovered Bad Block Table(DBBT). FCB has nand timings, DBBT search area,
+and firmware. See IMX6DQRM Section 8.5.2.2
+for more information.
+
+We can't use 'nand write' command to write SPL/firmware image directly
+like other platforms does. So we need special setup to write BCB block
+as per IMX6QDL reference manual 'nandbcb update' command do that job.
+
+for nand boot, up on reset bootrom look for FCB structure in
+first block's if FCB found the nand timings are loaded for
+further reads. once FCB read done, DTTB will be loaded and
+finally firmware will be loaded which is boot image.
+
+cmd_nandbcb will create FCB these structures
+by taking mtd partition as an example.
+- initial code will erase entire partition
+- followed by FCB setup, like first 2 blocks for FCB/DBBT write,
+ and next block for FW1/SPL
+- write firmware at FW1 block and
+- finally write fcb/dttb in first 2 block.
+
+Typical NAND BCB layout:
+=======================
+
+ no.of blocks = partition size / erasesize
+ no.of fcb/dbbt blocks = 2
+ FW1 offset = no.of fcb/dbbt
+
+block 0 1 2
+ -------------------------------
+ |FCB/DBBT 0|FCB/DBBT 1| FW 1 |
+ --------------------------------
+
+On summary, nandbcb update will
+- erase the entire partition
+- create BCB by creating 2 FCB/BDDT block followed by
+ 1 FW blocks based on partition size and erasesize.
+- fill FCB/DBBT structures
+- write FW/SPL in FW1
+- write FCB/DBBT in first 2 blocks
+
+step-1: write SPL
+
+icorem6qdl> ext4load mmc 0:1 $loadaddr SPL
+39936 bytes read in 10 ms (3.8 MiB/s)
+
+icorem6qdl> nandbcb update $loadaddr spl $filesize
+device 0 offset 0x0, size 0x9c00
+Erasing at 0x1c0000 -- 100% complete.
+NAND fw write: 0x80000 offset, 0xb000 bytes written: OK
+
+step-2: write u-boot-dtb.img
+
+icorem6qdl> nand erase.part uboot
+
+NAND erase.part: device 0 offset 0x200000, size 0x200000
+Erasing at 0x3c0000 -- 100% complete.
+OK
+
+icorem6qdl> ext4load mmc 0:1 $loadaddr u-boot-dtb.img
+589094 bytes read in 37 ms (15.2 MiB/s)
+
+icorem6qdl> nand write ${loadaddr} uboot ${filesize}
+
+NAND write: device 0 offset 0x200000, size 0x8fd26
+ 589094 bytes written: OK
+icorem6qdl>
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 7b81eacf50..5e92446c18 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -46,6 +46,20 @@ config CLK_BOSTON
help
Enable this to support the clocks
+config SPL_CLK_CCF
+ bool "SPL Common Clock Framework [CCF] support "
+ depends on SPL_CLK_IMX6Q
+ help
+ Enable this option if you want to (re-)use the Linux kernel's Common
+ Clock Framework [CCF] code in U-Boot's SPL.
+
+config CLK_CCF
+ bool "Common Clock Framework [CCF] support "
+ depends on CLK_IMX6Q || SANDBOX_CLK_CCF
+ help
+ Enable this option if you want to (re-)use the Linux kernel's Common
+ Clock Framework [CCF] code in U-Boot's clock driver.
+
config CLK_STM32F
bool "Enable clock driver support for STM32F family"
depends on CLK && (STM32F7 || STM32F4)
@@ -125,4 +139,12 @@ config CLK_MPC83XX
help
Support for the clock driver of the MPC83xx series of SoCs.
+config SANDBOX_CLK_CCF
+ bool "Sandbox Common Clock Framework [CCF] support "
+ depends on SANDBOX
+ select CLK_CCF
+ help
+ Enable this option if you want to test the Linux kernel's Common
+ Clock Framework [CCF] code in U-Boot's Sandbox clock driver.
+
endmenu
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f0ced49e5a..b7fec605c6 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -7,6 +7,8 @@
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk_fixed_rate.o
obj-$(CONFIG_$(SPL_TPL_)CLK) += clk_fixed_factor.o
+obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk.o clk-divider.o clk-mux.o
+obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk-fixed-factor.o
obj-y += analogbits/
obj-y += imx/
@@ -37,5 +39,6 @@ obj-$(CONFIG_ICS8N3QV01) += ics8n3qv01.o
obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
obj-$(CONFIG_SANDBOX) += clk_sandbox.o
obj-$(CONFIG_SANDBOX) += clk_sandbox_test.o
+obj-$(CONFIG_SANDBOX_CLK_CCF) += clk_sandbox_ccf.o
obj-$(CONFIG_STM32H7) += clk_stm32h7.o
obj-$(CONFIG_CLK_TI_SCI) += clk-ti-sci.o
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
new file mode 100644
index 0000000000..6921c76a48
--- /dev/null
+++ b/drivers/clk/clk-divider.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * Copyright (C) 2011 Richard Zhao, Linaro <richard.zhao@linaro.org>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <clk-uclass.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <dm/lists.h>
+#include <dm/device-internal.h>
+#include <linux/clk-provider.h>
+#include <div64.h>
+#include <clk.h>
+#include "clk.h"
+
+#define UBOOT_DM_CLK_CCF_DIVIDER "ccf_clk_divider"
+
+static unsigned int _get_table_div(const struct clk_div_table *table,
+ unsigned int val)
+{
+ const struct clk_div_table *clkt;
+
+ for (clkt = table; clkt->div; clkt++)
+ if (clkt->val == val)
+ return clkt->div;
+ return 0;
+}
+
+static unsigned int _get_div(const struct clk_div_table *table,
+ unsigned int val, unsigned long flags, u8 width)
+{
+ if (flags & CLK_DIVIDER_ONE_BASED)
+ return val;
+ if (flags & CLK_DIVIDER_POWER_OF_TWO)
+ return 1 << val;
+ if (flags & CLK_DIVIDER_MAX_AT_ZERO)
+ return val ? val : clk_div_mask(width) + 1;
+ if (table)
+ return _get_table_div(table, val);
+ return val + 1;
+}
+
+unsigned long divider_recalc_rate(struct clk *hw, unsigned long parent_rate,
+ unsigned int val,
+ const struct clk_div_table *table,
+ unsigned long flags, unsigned long width)
+{
+ unsigned int div;
+
+ div = _get_div(table, val, flags, width);
+ if (!div) {
+ WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO),
+ "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
+ clk_hw_get_name(hw));
+ return parent_rate;
+ }
+
+ return DIV_ROUND_UP_ULL((u64)parent_rate, div);
+}
+
+static ulong clk_divider_recalc_rate(struct clk *clk)
+{
+ struct clk_divider *divider =
+ to_clk_divider(dev_get_clk_ptr(clk->dev));
+ unsigned long parent_rate = clk_get_parent_rate(clk);
+ unsigned int val;
+
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ val = divider->io_divider_val;
+#else
+ val = readl(divider->reg);
+#endif
+ val >>= divider->shift;
+ val &= clk_div_mask(divider->width);
+
+ return divider_recalc_rate(clk, parent_rate, val, divider->table,
+ divider->flags, divider->width);
+}
+
+const struct clk_ops clk_divider_ops = {
+ .get_rate = clk_divider_recalc_rate,
+};
+
+static struct clk *_register_divider(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags, const struct clk_div_table *table)
+{
+ struct clk_divider *div;
+ struct clk *clk;
+ int ret;
+
+ if (clk_divider_flags & CLK_DIVIDER_HIWORD_MASK) {
+ if (width + shift > 16) {
+ pr_warn("divider value exceeds LOWORD field\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ /* allocate the divider */
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+
+ /* struct clk_divider assignments */
+ div->reg = reg;
+ div->shift = shift;
+ div->width = width;
+ div->flags = clk_divider_flags;
+ div->table = table;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ div->io_divider_val = *(u32 *)reg;
+#endif
+
+ /* register the clock */
+ clk = &div->clk;
+
+ ret = clk_register(clk, UBOOT_DM_CLK_CCF_DIVIDER, name, parent_name);
+ if (ret) {
+ kfree(div);
+ return ERR_PTR(ret);
+ }
+
+ return clk;
+}
+
+struct clk *clk_register_divider(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags)
+{
+ struct clk *clk;
+
+ clk = _register_divider(dev, name, parent_name, flags, reg, shift,
+ width, clk_divider_flags, NULL);
+ if (IS_ERR(clk))
+ return ERR_CAST(clk);
+ return clk;
+}
+
+U_BOOT_DRIVER(ccf_clk_divider) = {
+ .name = UBOOT_DM_CLK_CCF_DIVIDER,
+ .id = UCLASS_CLK,
+ .ops = &clk_divider_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
new file mode 100644
index 0000000000..711b0588bc
--- /dev/null
+++ b/drivers/clk/clk-fixed-factor.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ */
+#include <common.h>
+#include <malloc.h>
+#include <clk-uclass.h>
+#include <dm/device.h>
+#include <linux/clk-provider.h>
+#include <div64.h>
+#include <clk.h>
+#include "clk.h"
+
+#define UBOOT_DM_CLK_IMX_FIXED_FACTOR "ccf_clk_fixed_factor"
+
+static ulong clk_factor_recalc_rate(struct clk *clk)
+{
+ struct clk_fixed_factor *fix =
+ to_clk_fixed_factor(dev_get_clk_ptr(clk->dev));
+ unsigned long parent_rate = clk_get_parent_rate(clk);
+ unsigned long long int rate;
+
+ rate = (unsigned long long int)parent_rate * fix->mult;
+ do_div(rate, fix->div);
+ return (ulong)rate;
+}
+
+const struct clk_ops ccf_clk_fixed_factor_ops = {
+ .get_rate = clk_factor_recalc_rate,
+};
+
+struct clk *clk_hw_register_fixed_factor(struct device *dev,
+ const char *name, const char *parent_name, unsigned long flags,
+ unsigned int mult, unsigned int div)
+{
+ struct clk_fixed_factor *fix;
+ struct clk *clk;
+ int ret;
+
+ fix = kzalloc(sizeof(*fix), GFP_KERNEL);
+ if (!fix)
+ return ERR_PTR(-ENOMEM);
+
+ /* struct clk_fixed_factor assignments */
+ fix->mult = mult;
+ fix->div = div;
+ clk = &fix->clk;
+
+ ret = clk_register(clk, UBOOT_DM_CLK_IMX_FIXED_FACTOR, name,
+ parent_name);
+ if (ret) {
+ kfree(fix);
+ return ERR_PTR(ret);
+ }
+
+ return clk;
+}
+
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ unsigned int mult, unsigned int div)
+{
+ struct clk *clk;
+
+ clk = clk_hw_register_fixed_factor(dev, name, parent_name, flags, mult,
+ div);
+ if (IS_ERR(clk))
+ return ERR_CAST(clk);
+ return clk;
+}
+
+U_BOOT_DRIVER(imx_clk_fixed_factor) = {
+ .name = UBOOT_DM_CLK_IMX_FIXED_FACTOR,
+ .id = UCLASS_CLK,
+ .ops = &ccf_clk_fixed_factor_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
new file mode 100644
index 0000000000..3c075aa09e
--- /dev/null
+++ b/drivers/clk/clk-mux.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * Copyright (C) 2011 Richard Zhao, Linaro <richard.zhao@linaro.org>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * Simple multiplexer clock implementation
+ */
+
+/*
+ * U-Boot CCF porting node:
+ *
+ * The Linux kernel - as of tag: 5.0-rc3 is using also the imx_clk_fixup_mux()
+ * version of CCF mux. It is used on e.g. imx6q to provide fixes (like
+ * imx_cscmr1_fixup) for broken HW.
+ *
+ * At least for IMX6Q (but NOT IMX6QP) it is important when we set the parent
+ * clock.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <clk-uclass.h>
+#include <dm/device.h>
+#include <linux/clk-provider.h>
+#include <clk.h>
+#include "clk.h"
+
+#define UBOOT_DM_CLK_CCF_MUX "ccf_clk_mux"
+
+int clk_mux_val_to_index(struct clk *clk, u32 *table, unsigned int flags,
+ unsigned int val)
+{
+ struct clk_mux *mux = to_clk_mux(clk);
+ int num_parents = mux->num_parents;
+
+ if (table) {
+ int i;
+
+ for (i = 0; i < num_parents; i++)
+ if (table[i] == val)
+ return i;
+ return -EINVAL;
+ }
+
+ if (val && (flags & CLK_MUX_INDEX_BIT))
+ val = ffs(val) - 1;
+
+ if (val && (flags & CLK_MUX_INDEX_ONE))
+ val--;
+
+ if (val >= num_parents)
+ return -EINVAL;
+
+ return val;
+}
+
+static u8 clk_mux_get_parent(struct clk *clk)
+{
+ struct clk_mux *mux = to_clk_mux(clk);
+ u32 val;
+
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ val = mux->io_mux_val;
+#else
+ val = readl(mux->reg);
+#endif
+ val >>= mux->shift;
+ val &= mux->mask;
+
+ return clk_mux_val_to_index(clk, mux->table, mux->flags, val);
+}
+
+const struct clk_ops clk_mux_ops = {
+ .get_rate = clk_generic_get_rate,
+};
+
+struct clk *clk_hw_register_mux_table(struct device *dev, const char *name,
+ const char * const *parent_names, u8 num_parents,
+ unsigned long flags,
+ void __iomem *reg, u8 shift, u32 mask,
+ u8 clk_mux_flags, u32 *table)
+{
+ struct clk_mux *mux;
+ struct clk *clk;
+ u8 width = 0;
+ int ret;
+
+ if (clk_mux_flags & CLK_MUX_HIWORD_MASK) {
+ width = fls(mask) - ffs(mask) + 1;
+ if (width + shift > 16) {
+ pr_err("mux value exceeds LOWORD field\n");
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ /* allocate the mux */
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ /* U-boot specific assignments */
+ mux->parent_names = parent_names;
+ mux->num_parents = num_parents;
+
+ /* struct clk_mux assignments */
+ mux->reg = reg;
+ mux->shift = shift;
+ mux->mask = mask;
+ mux->flags = clk_mux_flags;
+ mux->table = table;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ mux->io_mux_val = *(u32 *)reg;
+#endif
+
+ clk = &mux->clk;
+
+ /*
+ * Read the current mux setup - so we assign correct parent.
+ *
+ * Changing parent would require changing internals of udevice struct
+ * for the corresponding clock (to do that define .set_parent() method.
+ */
+ ret = clk_register(clk, UBOOT_DM_CLK_CCF_MUX, name,
+ parent_names[clk_mux_get_parent(clk)]);
+ if (ret) {
+ kfree(mux);
+ return ERR_PTR(ret);
+ }
+
+ return clk;
+}
+
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
+ const char * const *parent_names, u8 num_parents,
+ unsigned long flags,
+ void __iomem *reg, u8 shift, u32 mask,
+ u8 clk_mux_flags, u32 *table)
+{
+ struct clk *clk;
+
+ clk = clk_hw_register_mux_table(dev, name, parent_names, num_parents,
+ flags, reg, shift, mask, clk_mux_flags,
+ table);
+ if (IS_ERR(clk))
+ return ERR_CAST(clk);
+ return clk;
+}
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+ const char * const *parent_names, u8 num_parents,
+ unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_mux_flags)
+{
+ u32 mask = BIT(width) - 1;
+
+ return clk_register_mux_table(dev, name, parent_names, num_parents,
+ flags, reg, shift, mask, clk_mux_flags,
+ NULL);
+}
+
+U_BOOT_DRIVER(ccf_clk_mux) = {
+ .name = UBOOT_DM_CLK_CCF_MUX,
+ .id = UCLASS_CLK,
+ .ops = &clk_mux_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index 06a8258d5f..85dfe712f5 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -13,6 +13,7 @@
#include <dm/read.h>
#include <dt-structs.h>
#include <errno.h>
+#include <linux/clk-provider.h>
static inline const struct clk_ops *clk_dev_ops(struct udevice *dev)
{
@@ -381,6 +382,43 @@ ulong clk_get_rate(struct clk *clk)
return ops->get_rate(clk);
}
+struct clk *clk_get_parent(struct clk *clk)
+{
+ struct udevice *pdev;
+ struct clk *pclk;
+
+ debug("%s(clk=%p)\n", __func__, clk);
+
+ pdev = dev_get_parent(clk->dev);
+ pclk = dev_get_clk_ptr(pdev);
+ if (!pclk)
+ return ERR_PTR(-ENODEV);
+
+ return pclk;
+}
+
+long long clk_get_parent_rate(struct clk *clk)
+{
+ const struct clk_ops *ops;
+ struct clk *pclk;
+
+ debug("%s(clk=%p)\n", __func__, clk);
+
+ pclk = clk_get_parent(clk);
+ if (IS_ERR(pclk))
+ return -ENODEV;
+
+ ops = clk_dev_ops(pclk->dev);
+ if (!ops->get_rate)
+ return -ENOSYS;
+
+ /* Read the 'rate' if not already set or if proper flag set*/
+ if (!pclk->rate || pclk->flags & CLK_GET_RATE_NOCACHE)
+ pclk->rate = clk_get_rate(pclk);
+
+ return pclk->rate;
+}
+
ulong clk_set_rate(struct clk *clk, ulong rate)
{
const struct clk_ops *ops = clk_dev_ops(clk->dev);
@@ -455,6 +493,28 @@ int clk_disable_bulk(struct clk_bulk *bulk)
return 0;
}
+int clk_get_by_id(ulong id, struct clk **clkp)
+{
+ struct udevice *dev;
+ struct uclass *uc;
+ int ret;
+
+ ret = uclass_get(UCLASS_CLK, &uc);
+ if (ret)
+ return ret;
+
+ uclass_foreach_dev(dev, uc) {
+ struct clk *clk = dev_get_clk_ptr(dev);
+
+ if (clk && clk->id == id) {
+ *clkp = clk;
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
UCLASS_DRIVER(clk) = {
.id = UCLASS_CLK,
.name = "clk",
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
new file mode 100644
index 0000000000..7d748c9fc7
--- /dev/null
+++ b/drivers/clk/clk.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <dm/lists.h>
+#include <dm/device-internal.h>
+#include <clk.h>
+
+int clk_register(struct clk *clk, const char *drv_name,
+ const char *name, const char *parent_name)
+{
+ struct udevice *parent;
+ struct driver *drv;
+ int ret;
+
+ ret = uclass_get_device_by_name(UCLASS_CLK, parent_name, &parent);
+ if (ret)
+ printf("%s: UCLASS parent: 0x%p\n", __func__, parent);
+
+ debug("%s: name: %s parent: %s [0x%p]\n", __func__, name, parent->name,
+ parent);
+
+ drv = lists_driver_lookup_name(drv_name);
+ if (!drv) {
+ printf("%s: %s is not a valid driver name\n",
+ __func__, drv_name);
+ return -ENOENT;
+ }
+
+ ret = device_bind(parent, drv, name, NULL, -1, &clk->dev);
+ if (ret) {
+ printf("%s: CLK: %s driver bind error [%d]!\n", __func__, name,
+ ret);
+ return ret;
+ }
+
+ /* Store back pointer to clk from udevice */
+ clk->dev->uclass_priv = clk;
+
+ return 0;
+}
+
+ulong clk_generic_get_rate(struct clk *clk)
+{
+ return clk_get_parent_rate(clk);
+}
+
+const char *clk_hw_get_name(const struct clk *hw)
+{
+ return hw->dev->name;
+}
diff --git a/drivers/clk/clk_fixed_factor.c b/drivers/clk/clk_fixed_factor.c
index 5fa20a84db..dcdb6ddf5c 100644
--- a/drivers/clk/clk_fixed_factor.c
+++ b/drivers/clk/clk_fixed_factor.c
@@ -24,9 +24,6 @@ static ulong clk_fixed_factor_get_rate(struct clk *clk)
uint64_t rate;
struct clk_fixed_factor *ff = to_clk_fixed_factor(clk->dev);
- if (clk->id != 0)
- return -EINVAL;
-
rate = clk_get_rate(&ff->parent);
if (IS_ERR_VALUE(rate))
return rate;
diff --git a/drivers/clk/clk_fixed_rate.c b/drivers/clk/clk_fixed_rate.c
index d8d9f86c86..1fdf8c4e54 100644
--- a/drivers/clk/clk_fixed_rate.c
+++ b/drivers/clk/clk_fixed_rate.c
@@ -8,6 +8,7 @@
#include <dm.h>
struct clk_fixed_rate {
+ struct clk clk;
unsigned long fixed_rate;
};
@@ -15,9 +16,6 @@ struct clk_fixed_rate {
static ulong clk_fixed_rate_get_rate(struct clk *clk)
{
- if (clk->id != 0)
- return -EINVAL;
-
return to_clk_fixed_rate(clk->dev)->fixed_rate;
}
@@ -27,10 +25,14 @@ const struct clk_ops clk_fixed_rate_ops = {
static int clk_fixed_rate_ofdata_to_platdata(struct udevice *dev)
{
+ struct clk *clk = &to_clk_fixed_rate(dev)->clk;
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
to_clk_fixed_rate(dev)->fixed_rate =
dev_read_u32_default(dev, "clock-frequency", 0);
#endif
+ /* Make fixed rate clock accessible from higher level struct clk */
+ dev->uclass_priv = clk;
+ clk->dev = dev;
return 0;
}
diff --git a/drivers/clk/clk_sandbox_ccf.c b/drivers/clk/clk_sandbox_ccf.c
new file mode 100644
index 0000000000..edeb0f2cf3
--- /dev/null
+++ b/drivers/clk/clk_sandbox_ccf.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * Common Clock Framework [CCF] driver for Sandbox
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <clk.h>
+#include <asm/clk.h>
+#include <clk-uclass.h>
+#include <linux/clk-provider.h>
+#include <sandbox-clk.h>
+
+/*
+ * Sandbox implementation of CCF primitives necessary for clk-uclass testing
+ *
+ * --- Sandbox PLLv3 ---
+ */
+struct clk_pllv3 {
+ struct clk clk;
+ u32 div_mask;
+ u32 div_shift;
+};
+
+static ulong clk_pllv3_get_rate(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_parent_rate(clk);
+
+ return parent_rate * 24;
+}
+
+static const struct clk_ops clk_pllv3_generic_ops = {
+ .get_rate = clk_pllv3_get_rate,
+};
+
+struct clk *sandbox_clk_pllv3(enum sandbox_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base,
+ u32 div_mask)
+{
+ struct clk_pllv3 *pll;
+ struct clk *clk;
+ char *drv_name = "sandbox_clk_pllv3";
+ int ret;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->div_mask = div_mask;
+ clk = &pll->clk;
+
+ ret = clk_register(clk, drv_name, name, parent_name);
+ if (ret) {
+ kfree(pll);
+ return ERR_PTR(ret);
+ }
+
+ return clk;
+}
+
+U_BOOT_DRIVER(sandbox_clk_pll_generic) = {
+ .name = "sandbox_clk_pllv3",
+ .id = UCLASS_CLK,
+ .ops = &clk_pllv3_generic_ops,
+};
+
+/* --- Sandbox PLLv3 --- */
+/* --- Sandbox Gate --- */
+struct clk_gate2 {
+ struct clk clk;
+ bool state;
+};
+
+#define to_clk_gate2(_clk) container_of(_clk, struct clk_gate2, clk)
+
+static int clk_gate2_enable(struct clk *clk)
+{
+ struct clk_gate2 *gate = to_clk_gate2(dev_get_clk_ptr(clk->dev));
+
+ gate->state = 1;
+ return 0;
+}
+
+static int clk_gate2_disable(struct clk *clk)
+{
+ struct clk_gate2 *gate = to_clk_gate2(dev_get_clk_ptr(clk->dev));
+
+ gate->state = 0;
+ return 0;
+}
+
+static const struct clk_ops clk_gate2_ops = {
+ .enable = clk_gate2_enable,
+ .disable = clk_gate2_disable,
+ .get_rate = clk_generic_get_rate,
+};
+
+struct clk *sandbox_clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ u8 bit_idx, u8 cgr_val,
+ u8 clk_gate2_flags)
+{
+ struct clk_gate2 *gate;
+ struct clk *clk;
+ int ret;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ gate->state = 0;
+ clk = &gate->clk;
+
+ ret = clk_register(clk, "sandbox_clk_gate2", name, parent_name);
+ if (ret) {
+ kfree(gate);
+ return ERR_PTR(ret);
+ }
+
+ return clk;
+}
+
+U_BOOT_DRIVER(sandbox_clk_gate2) = {
+ .name = "sandbox_clk_gate2",
+ .id = UCLASS_CLK,
+ .ops = &clk_gate2_ops,
+};
+
+/* --- Sandbox Gate --- */
+/* The CCF core driver itself */
+static const struct udevice_id sandbox_clk_ccf_test_ids[] = {
+ { .compatible = "sandbox,clk-ccf" },
+ { }
+};
+
+static const char *const usdhc_sels[] = { "pll3_60m", "pll3_80m", };
+
+static int sandbox_clk_ccf_probe(struct udevice *dev)
+{
+ void *base = NULL;
+ u32 reg;
+
+ clk_dm(SANDBOX_CLK_PLL3,
+ sandbox_clk_pllv3(SANDBOX_PLLV3_USB, "pll3_usb_otg", "osc",
+ base + 0x10, 0x3));
+
+ clk_dm(SANDBOX_CLK_PLL3_60M,
+ sandbox_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8));
+
+ clk_dm(SANDBOX_CLK_PLL3_80M,
+ sandbox_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6));
+
+ /* The HW adds +1 to the divider value (2+1) is the divider */
+ reg = (2 << 19);
+ clk_dm(SANDBOX_CLK_ECSPI_ROOT,
+ sandbox_clk_divider("ecspi_root", "pll3_60m", &reg, 19, 6));
+
+ clk_dm(SANDBOX_CLK_ECSPI1,
+ sandbox_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0));
+
+ /* Select 'pll3_60m' */
+ reg = 0;
+ clk_dm(SANDBOX_CLK_USDHC1_SEL,
+ sandbox_clk_mux("usdhc1_sel", &reg, 16, 1, usdhc_sels,
+ ARRAY_SIZE(usdhc_sels)));
+
+ /* Select 'pll3_80m' */
+ reg = BIT(17);
+ clk_dm(SANDBOX_CLK_USDHC2_SEL,
+ sandbox_clk_mux("usdhc2_sel", &reg, 17, 1, usdhc_sels,
+ ARRAY_SIZE(usdhc_sels)));
+
+ return 0;
+}
+
+U_BOOT_DRIVER(sandbox_clk_ccf) = {
+ .name = "sandbox_clk_ccf",
+ .id = UCLASS_CLK,
+ .probe = sandbox_clk_ccf_probe,
+ .of_match = sandbox_clk_ccf_test_ids,
+};
diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig
index a6fb58d6cf..3e6a980c8c 100644
--- a/drivers/clk/imx/Kconfig
+++ b/drivers/clk/imx/Kconfig
@@ -1,3 +1,19 @@
+config SPL_CLK_IMX6Q
+ bool "SPL clock support for i.MX6Q"
+ depends on ARCH_MX6 && SPL
+ select SPL_CLK
+ select SPL_CLK_CCF
+ help
+ This enables SPL DM/DTS support for clock driver in i.MX6Q platforms.
+
+config CLK_IMX6Q
+ bool "Clock support for i.MX6Q"
+ depends on ARCH_MX6
+ select CLK
+ select CLK_CCF
+ help
+ This enables DM/DTS support for clock driver in i.MX6Q platforms.
+
config CLK_IMX8
bool "Clock support for i.MX8"
depends on ARCH_IMX8
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index eb379c188a..105a58ca90 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -2,6 +2,8 @@
#
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk-gate2.o clk-pllv3.o clk-pfd.o
+obj-$(CONFIG_$(SPL_TPL_)CLK_IMX6Q) += clk-imx6q.o
obj-$(CONFIG_CLK_IMX8) += clk-imx8.o
ifdef CONFIG_CLK_IMX8
diff --git a/drivers/clk/imx/clk-gate2.c b/drivers/clk/imx/clk-gate2.c
new file mode 100644
index 0000000000..571be32088
--- /dev/null
+++ b/drivers/clk/imx/clk-gate2.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <clk-uclass.h>
+#include <dm/device.h>
+#include <linux/clk-provider.h>
+#include <clk.h>
+#include "clk.h"
+
+#define UBOOT_DM_CLK_IMX_GATE2 "imx_clk_gate2"
+
+struct clk_gate2 {
+ struct clk clk;
+ void __iomem *reg;
+ u8 bit_idx;
+ u8 cgr_val;
+ u8 flags;
+};
+
+#define to_clk_gate2(_clk) container_of(_clk, struct clk_gate2, clk)
+
+static int clk_gate2_enable(struct clk *clk)
+{
+ struct clk_gate2 *gate = to_clk_gate2(dev_get_clk_ptr(clk->dev));
+ u32 reg;
+
+ reg = readl(gate->reg);
+ reg &= ~(3 << gate->bit_idx);
+ reg |= gate->cgr_val << gate->bit_idx;
+ writel(reg, gate->reg);
+
+ return 0;
+}
+
+static int clk_gate2_disable(struct clk *clk)
+{
+ struct clk_gate2 *gate = to_clk_gate2(dev_get_clk_ptr(clk->dev));
+ u32 reg;
+
+ reg = readl(gate->reg);
+ reg &= ~(3 << gate->bit_idx);
+ writel(reg, gate->reg);
+
+ return 0;
+}
+
+static const struct clk_ops clk_gate2_ops = {
+ .enable = clk_gate2_enable,
+ .disable = clk_gate2_disable,
+ .get_rate = clk_generic_get_rate,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx, u8 cgr_val,
+ u8 clk_gate2_flags)
+{
+ struct clk_gate2 *gate;
+ struct clk *clk;
+ int ret;
+
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ gate->reg = reg;
+ gate->bit_idx = bit_idx;
+ gate->cgr_val = cgr_val;
+ gate->flags = clk_gate2_flags;
+
+ clk = &gate->clk;
+
+ ret = clk_register(clk, UBOOT_DM_CLK_IMX_GATE2, name, parent_name);
+ if (ret) {
+ kfree(gate);
+ return ERR_PTR(ret);
+ }
+
+ return clk;
+}
+
+U_BOOT_DRIVER(clk_gate2) = {
+ .name = UBOOT_DM_CLK_IMX_GATE2,
+ .id = UCLASS_CLK,
+ .ops = &clk_gate2_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
new file mode 100644
index 0000000000..92e9337d44
--- /dev/null
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+#include "clk.h"
+
+static int imx6q_check_id(ulong id)
+{
+ if (id < IMX6QDL_CLK_DUMMY || id >= IMX6QDL_CLK_END) {
+ printf("%s: Invalid clk ID #%lu\n", __func__, id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static ulong imx6q_clk_get_rate(struct clk *clk)
+{
+ struct clk *c;
+ int ret;
+
+ debug("%s(#%lu)\n", __func__, clk->id);
+
+ ret = imx6q_check_id(clk->id);
+ if (ret)
+ return ret;
+
+ ret = clk_get_by_id(clk->id, &c);
+ if (ret)
+ return ret;
+
+ return clk_get_rate(c);
+}
+
+static ulong imx6q_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate);
+
+ return rate;
+}
+
+static int __imx6q_clk_enable(struct clk *clk, bool enable)
+{
+ struct clk *c;
+ int ret = 0;
+
+ debug("%s(#%lu) en: %d\n", __func__, clk->id, enable);
+
+ ret = imx6q_check_id(clk->id);
+ if (ret)
+ return ret;
+
+ ret = clk_get_by_id(clk->id, &c);
+ if (ret)
+ return ret;
+
+ if (enable)
+ ret = clk_enable(c);
+ else
+ ret = clk_disable(c);
+
+ return ret;
+}
+
+static int imx6q_clk_disable(struct clk *clk)
+{
+ return __imx6q_clk_enable(clk, 0);
+}
+
+static int imx6q_clk_enable(struct clk *clk)
+{
+ return __imx6q_clk_enable(clk, 1);
+}
+
+static struct clk_ops imx6q_clk_ops = {
+ .set_rate = imx6q_clk_set_rate,
+ .get_rate = imx6q_clk_get_rate,
+ .enable = imx6q_clk_enable,
+ .disable = imx6q_clk_disable,
+};
+
+static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+
+static int imx6q_clk_probe(struct udevice *dev)
+{
+ void *base;
+
+ /* Anatop clocks */
+ base = (void *)ANATOP_BASE_ADDR;
+
+ clk_dm(IMX6QDL_CLK_PLL2,
+ imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc",
+ base + 0x30, 0x1));
+ clk_dm(IMX6QDL_CLK_PLL3_USB_OTG,
+ imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc",
+ base + 0x10, 0x3));
+ clk_dm(IMX6QDL_CLK_PLL3_60M,
+ imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8));
+ clk_dm(IMX6QDL_CLK_PLL2_PFD0_352M,
+ imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0));
+ clk_dm(IMX6QDL_CLK_PLL2_PFD2_396M,
+ imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2));
+
+ /* CCM clocks */
+ base = dev_read_addr_ptr(dev);
+ if (base == (void *)FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ clk_dm(IMX6QDL_CLK_USDHC1_SEL,
+ imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1,
+ usdhc_sels, ARRAY_SIZE(usdhc_sels)));
+ clk_dm(IMX6QDL_CLK_USDHC2_SEL,
+ imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1,
+ usdhc_sels, ARRAY_SIZE(usdhc_sels)));
+ clk_dm(IMX6QDL_CLK_USDHC3_SEL,
+ imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1,
+ usdhc_sels, ARRAY_SIZE(usdhc_sels)));
+ clk_dm(IMX6QDL_CLK_USDHC4_SEL,
+ imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1,
+ usdhc_sels, ARRAY_SIZE(usdhc_sels)));
+
+ clk_dm(IMX6QDL_CLK_USDHC1_PODF,
+ imx_clk_divider("usdhc1_podf", "usdhc1_sel",
+ base + 0x24, 11, 3));
+ clk_dm(IMX6QDL_CLK_USDHC2_PODF,
+ imx_clk_divider("usdhc2_podf", "usdhc2_sel",
+ base + 0x24, 16, 3));
+ clk_dm(IMX6QDL_CLK_USDHC3_PODF,
+ imx_clk_divider("usdhc3_podf", "usdhc3_sel",
+ base + 0x24, 19, 3));
+ clk_dm(IMX6QDL_CLK_USDHC4_PODF,
+ imx_clk_divider("usdhc4_podf", "usdhc4_sel",
+ base + 0x24, 22, 3));
+
+ clk_dm(IMX6QDL_CLK_ECSPI_ROOT,
+ imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6));
+
+ clk_dm(IMX6QDL_CLK_ECSPI1,
+ imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0));
+ clk_dm(IMX6QDL_CLK_ECSPI2,
+ imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2));
+ clk_dm(IMX6QDL_CLK_ECSPI3,
+ imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4));
+ clk_dm(IMX6QDL_CLK_ECSPI4,
+ imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6));
+ clk_dm(IMX6QDL_CLK_USDHC1,
+ imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2));
+ clk_dm(IMX6QDL_CLK_USDHC2,
+ imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4));
+ clk_dm(IMX6QDL_CLK_USDHC3,
+ imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6));
+ clk_dm(IMX6QDL_CLK_USDHC4,
+ imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8));
+
+ return 0;
+}
+
+static const struct udevice_id imx6q_clk_ids[] = {
+ { .compatible = "fsl,imx6q-ccm" },
+ { },
+};
+
+U_BOOT_DRIVER(imx6q_clk) = {
+ .name = "clk_imx6q",
+ .id = UCLASS_CLK,
+ .of_match = imx6q_clk_ids,
+ .ops = &imx6q_clk_ops,
+ .probe = imx6q_clk_probe,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/imx/clk-pfd.c b/drivers/clk/imx/clk-pfd.c
new file mode 100644
index 0000000000..188b2b3b90
--- /dev/null
+++ b/drivers/clk/imx/clk-pfd.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <clk-uclass.h>
+#include <dm/device.h>
+#include <linux/clk-provider.h>
+#include <div64.h>
+#include <clk.h>
+#include "clk.h"
+
+#define UBOOT_DM_CLK_IMX_PFD "imx_clk_pfd"
+
+struct clk_pfd {
+ struct clk clk;
+ void __iomem *reg;
+ u8 idx;
+};
+
+#define to_clk_pfd(_clk) container_of(_clk, struct clk_pfd, clk)
+
+#define SET 0x4
+#define CLR 0x8
+#define OTG 0xc
+
+static unsigned long clk_pfd_recalc_rate(struct clk *clk)
+{
+ struct clk_pfd *pfd =
+ to_clk_pfd(dev_get_clk_ptr(clk->dev));
+ unsigned long parent_rate = clk_get_parent_rate(clk);
+ u64 tmp = parent_rate;
+ u8 frac = (readl(pfd->reg) >> (pfd->idx * 8)) & 0x3f;
+
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static const struct clk_ops clk_pfd_ops = {
+ .get_rate = clk_pfd_recalc_rate,
+};
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx)
+{
+ struct clk_pfd *pfd;
+ struct clk *clk;
+ int ret;
+
+ pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
+ if (!pfd)
+ return ERR_PTR(-ENOMEM);
+
+ pfd->reg = reg;
+ pfd->idx = idx;
+
+ /* register the clock */
+ clk = &pfd->clk;
+
+ ret = clk_register(clk, UBOOT_DM_CLK_IMX_PFD, name, parent_name);
+ if (ret) {
+ kfree(pfd);
+ return ERR_PTR(ret);
+ }
+
+ return clk;
+}
+
+U_BOOT_DRIVER(clk_pfd) = {
+ .name = UBOOT_DM_CLK_IMX_PFD,
+ .id = UCLASS_CLK,
+ .ops = &clk_pfd_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
new file mode 100644
index 0000000000..fbb7b24d5e
--- /dev/null
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <clk-uclass.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <clk.h>
+#include "clk.h"
+
+#define UBOOT_DM_CLK_IMX_PLLV3 "imx_clk_pllv3"
+
+struct clk_pllv3 {
+ struct clk clk;
+ void __iomem *base;
+ u32 div_mask;
+ u32 div_shift;
+};
+
+#define to_clk_pllv3(_clk) container_of(_clk, struct clk_pllv3, clk)
+
+static ulong clk_pllv3_get_rate(struct clk *clk)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(dev_get_clk_ptr(clk->dev));
+ unsigned long parent_rate = clk_get_parent_rate(clk);
+
+ u32 div = (readl(pll->base) >> pll->div_shift) & pll->div_mask;
+
+ return (div == 1) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static const struct clk_ops clk_pllv3_generic_ops = {
+ .get_rate = clk_pllv3_get_rate,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base,
+ u32 div_mask)
+{
+ struct clk_pllv3 *pll;
+ struct clk *clk;
+ char *drv_name;
+ int ret;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ switch (type) {
+ case IMX_PLLV3_GENERIC:
+ case IMX_PLLV3_USB:
+ drv_name = UBOOT_DM_CLK_IMX_PLLV3;
+ break;
+ default:
+ kfree(pll);
+ return ERR_PTR(-ENOTSUPP);
+ }
+
+ pll->base = base;
+ pll->div_mask = div_mask;
+ clk = &pll->clk;
+
+ ret = clk_register(clk, drv_name, name, parent_name);
+ if (ret) {
+ kfree(pll);
+ return ERR_PTR(ret);
+ }
+
+ return clk;
+}
+
+U_BOOT_DRIVER(clk_pllv3_generic) = {
+ .name = UBOOT_DM_CLK_IMX_PLLV3,
+ .id = UCLASS_CLK,
+ .ops = &clk_pllv3_generic_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
new file mode 100644
index 0000000000..e6d51830e8
--- /dev/null
+++ b/drivers/clk/imx/clk.h
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+#ifndef __MACH_IMX_CLK_H
+#define __MACH_IMX_CLK_H
+
+#include <linux/clk-provider.h>
+
+enum imx_pllv3_type {
+ IMX_PLLV3_GENERIC,
+ IMX_PLLV3_SYS,
+ IMX_PLLV3_USB,
+ IMX_PLLV3_USB_VF610,
+ IMX_PLLV3_AV,
+ IMX_PLLV3_ENET,
+ IMX_PLLV3_ENET_IMX7,
+ IMX_PLLV3_SYS_VF610,
+ IMX_PLLV3_DDR_IMX7,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx, u8 cgr_val,
+ u8 clk_gate_flags);
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base,
+ u32 div_mask);
+
+static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0x3, 0);
+}
+
+static inline struct clk *imx_clk_fixed_factor(const char *name,
+ const char *parent, unsigned int mult, unsigned int div)
+{
+ return clk_register_fixed_factor(NULL, name, parent,
+ CLK_SET_RATE_PARENT, mult, div);
+}
+
+static inline struct clk *imx_clk_divider(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width)
+{
+ return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+ reg, shift, width, 0);
+}
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx);
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char * const *parents,
+ int num_parents, void (*fixup)(u32 *val));
+
+static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char * const *parents,
+ int num_parents)
+{
+ return clk_register_mux(NULL, name, parents, num_parents,
+ CLK_SET_RATE_NO_REPARENT, reg, shift,
+ width, 0);
+}
+
+#endif /* __MACH_IMX_CLK_H */
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 8bd30c75b2..64ab7a303f 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -31,7 +31,7 @@ struct mxc_bank_info {
};
#ifndef CONFIG_DM_GPIO
-#define GPIO_TO_PORT(n) (n / 32)
+#define GPIO_TO_PORT(n) ((n) / 32)
/* GPIO port description */
static unsigned long gpio_ports[] = {
diff --git a/drivers/gpio/mxs_gpio.c b/drivers/gpio/mxs_gpio.c
index c2c8a25886..b2451fdda8 100644
--- a/drivers/gpio/mxs_gpio.c
+++ b/drivers/gpio/mxs_gpio.c
@@ -51,6 +51,7 @@ void mxs_gpio_init(void)
}
}
+#if !CONFIG_IS_ENABLED(DM_GPIO)
int gpio_get_value(unsigned gpio)
{
uint32_t bank = PAD_BANK(gpio);
@@ -127,3 +128,150 @@ int name_to_gpio(const char *name)
return (bank << MXS_PAD_BANK_SHIFT) | (pin << MXS_PAD_PIN_SHIFT);
}
+#else /* CONFIG_DM_GPIO */
+#include <dm.h>
+#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
+#define MXS_MAX_GPIO_PER_BANK 32
+
+DECLARE_GLOBAL_DATA_PTR;
+/*
+ * According to i.MX28 Reference Manual:
+ * 'i.MX28 Applications Processor Reference Manual, Rev. 1, 2010'
+ * The i.MX28 has following number of GPIOs available:
+ * Bank 0: 0-28 -> 29 PINS
+ * Bank 1: 0-31 -> 32 PINS
+ * Bank 2: 0-27 -> 28 PINS
+ * Bank 3: 0-30 -> 31 PINS
+ * Bank 4: 0-20 -> 21 PINS
+ */
+
+struct mxs_gpio_priv {
+ unsigned int bank;
+};
+
+static int mxs_gpio_get_value(struct udevice *dev, unsigned offset)
+{
+ struct mxs_gpio_priv *priv = dev_get_priv(dev);
+ struct mxs_register_32 *reg =
+ (struct mxs_register_32 *)(MXS_PINCTRL_BASE +
+ PINCTRL_DIN(priv->bank));
+
+ return (readl(&reg->reg) >> offset) & 1;
+}
+
+static int mxs_gpio_set_value(struct udevice *dev, unsigned offset,
+ int value)
+{
+ struct mxs_gpio_priv *priv = dev_get_priv(dev);
+ struct mxs_register_32 *reg =
+ (struct mxs_register_32 *)(MXS_PINCTRL_BASE +
+ PINCTRL_DOUT(priv->bank));
+ if (value)
+ writel(BIT(offset), &reg->reg_set);
+ else
+ writel(BIT(offset), &reg->reg_clr);
+
+ return 0;
+}
+
+static int mxs_gpio_direction_input(struct udevice *dev, unsigned offset)
+{
+ struct mxs_gpio_priv *priv = dev_get_priv(dev);
+ struct mxs_register_32 *reg =
+ (struct mxs_register_32 *)(MXS_PINCTRL_BASE +
+ PINCTRL_DOE(priv->bank));
+
+ writel(BIT(offset), &reg->reg_clr);
+
+ return 0;
+}
+
+static int mxs_gpio_direction_output(struct udevice *dev, unsigned offset,
+ int value)
+{
+ struct mxs_gpio_priv *priv = dev_get_priv(dev);
+ struct mxs_register_32 *reg =
+ (struct mxs_register_32 *)(MXS_PINCTRL_BASE +
+ PINCTRL_DOE(priv->bank));
+
+ mxs_gpio_set_value(dev, offset, value);
+
+ writel(BIT(offset), &reg->reg_set);
+
+ return 0;
+}
+
+static int mxs_gpio_get_function(struct udevice *dev, unsigned offset)
+{
+ struct mxs_gpio_priv *priv = dev_get_priv(dev);
+ struct mxs_register_32 *reg =
+ (struct mxs_register_32 *)(MXS_PINCTRL_BASE +
+ PINCTRL_DOE(priv->bank));
+ bool is_output = !!(readl(&reg->reg) >> offset);
+
+ return is_output ? GPIOF_OUTPUT : GPIOF_INPUT;
+}
+
+static const struct dm_gpio_ops gpio_mxs_ops = {
+ .direction_input = mxs_gpio_direction_input,
+ .direction_output = mxs_gpio_direction_output,
+ .get_value = mxs_gpio_get_value,
+ .set_value = mxs_gpio_set_value,
+ .get_function = mxs_gpio_get_function,
+};
+
+static int mxs_gpio_probe(struct udevice *dev)
+{
+ struct mxs_gpio_priv *priv = dev_get_priv(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct fdtdec_phandle_args args;
+ int node = dev_of_offset(dev);
+ char name[16], *str;
+ fdt_addr_t addr;
+ int ret;
+
+ addr = devfdt_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE) {
+ printf("%s: No 'reg' property defined!\n", __func__);
+ return -EINVAL;
+ }
+
+ priv->bank = (unsigned int)addr;
+
+ snprintf(name, sizeof(name), "GPIO%d_", priv->bank);
+ str = strdup(name);
+ if (!str)
+ return -ENOMEM;
+
+ uc_priv->bank_name = str;
+
+ ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, node, "gpio-ranges",
+ NULL, 3, 0, &args);
+ if (ret)
+ printf("%s: 'gpio-ranges' not defined - using default!\n",
+ __func__);
+
+ uc_priv->gpio_count = ret == 0 ? args.args[2] : MXS_MAX_GPIO_PER_BANK;
+
+ debug("%s: %s: %d pins\n", __func__, uc_priv->bank_name,
+ uc_priv->gpio_count);
+
+ return 0;
+}
+
+static const struct udevice_id mxs_gpio_ids[] = {
+ { .compatible = "fsl,imx23-gpio" },
+ { .compatible = "fsl,imx28-gpio" },
+ { }
+};
+
+U_BOOT_DRIVER(gpio_mxs) = {
+ .name = "gpio_mxs",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_mxs_ops,
+ .probe = mxs_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct mxs_gpio_priv),
+ .of_match = mxs_gpio_ids,
+};
+#endif /* CONFIG_DM_GPIO */
diff --git a/drivers/misc/imx8/scu_api.c b/drivers/misc/imx8/scu_api.c
index d9c4d5d784..031bc0048b 100644
--- a/drivers/misc/imx8/scu_api.c
+++ b/drivers/misc/imx8/scu_api.c
@@ -273,6 +273,34 @@ int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val)
return 0;
}
+int sc_misc_get_temp(sc_ipc_t ipc, sc_rsrc_t resource, sc_misc_temp_t temp,
+ s16 *celsius, s8 *tenths)
+{
+ struct udevice *dev = gd->arch.scu_dev;
+ int size = sizeof(struct sc_rpc_msg_s);
+ struct sc_rpc_msg_s msg;
+ int ret;
+
+ RPC_VER(&msg) = SC_RPC_VERSION;
+ RPC_SVC(&msg) = (u8)SC_RPC_SVC_MISC;
+ RPC_FUNC(&msg) = (u8)MISC_FUNC_GET_TEMP;
+ RPC_U16(&msg, 0U) = (u16)resource;
+ RPC_U8(&msg, 2U) = (u8)temp;
+ RPC_SIZE(&msg) = 2U;
+
+ ret = misc_call(dev, SC_FALSE, &msg, size, &msg, size);
+ if (ret < 0)
+ return ret;
+
+ if (celsius)
+ *celsius = RPC_I16(&msg, 0U);
+
+ if (tenths)
+ *tenths = RPC_I8(&msg, 2U);
+
+ return 0;
+}
+
/* RM */
sc_bool_t sc_rm_is_memreg_owned(sc_ipc_t ipc, sc_rm_mr_t mr)
{
diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c
index f3d687ae80..350812a04b 100644
--- a/drivers/mmc/mmc_spi.c
+++ b/drivers/mmc/mmc_spi.c
@@ -84,7 +84,7 @@ static int mmc_spi_sendcmd(struct udevice *dev,
cmdo[4] = cmdarg >> 8;
cmdo[5] = cmdarg;
cmdo[6] = (crc7(0, &cmdo[1], 5) << 1) | 0x01;
- ret = dm_spi_xfer(dev, sizeof(cmdo) * 8, cmdo, NULL, 0);
+ ret = dm_spi_xfer(dev, sizeof(cmdo) * 8, cmdo, NULL, SPI_XFER_BEGIN);
if (ret)
return ret;
@@ -360,6 +360,8 @@ static int dm_mmc_spi_request(struct udevice *dev, struct mmc_cmd *cmd,
}
done:
+ dm_spi_xfer(dev, 0, NULL, NULL, SPI_XFER_END);
+
dm_spi_release_bus(dev);
return ret;
diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c
index b93d77a395..a41b9620d0 100644
--- a/drivers/mtd/nand/raw/mxs_nand.c
+++ b/drivers/mtd/nand/raw/mxs_nand.c
@@ -25,7 +25,7 @@
#include <asm/mach-imx/regs-bch.h>
#include <asm/mach-imx/regs-gpmi.h>
#include <asm/arch/sys_proto.h>
-#include "mxs_nand.h"
+#include <mxs_nand.h>
#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4
diff --git a/drivers/mtd/nand/raw/mxs_nand_dt.c b/drivers/mtd/nand/raw/mxs_nand_dt.c
index 44dec5dedf..8ad7d618c6 100644
--- a/drivers/mtd/nand/raw/mxs_nand_dt.c
+++ b/drivers/mtd/nand/raw/mxs_nand_dt.c
@@ -15,7 +15,7 @@
#include <linux/ioport.h>
#include <linux/printk.h>
-#include "mxs_nand.h"
+#include <mxs_nand.h>
struct mxs_nand_dt_data {
unsigned int max_ecc_strength_supported;
diff --git a/drivers/mtd/nand/raw/mxs_nand_spl.c b/drivers/mtd/nand/raw/mxs_nand_spl.c
index ee7d9cb957..975a91a37d 100644
--- a/drivers/mtd/nand/raw/mxs_nand_spl.c
+++ b/drivers/mtd/nand/raw/mxs_nand_spl.c
@@ -6,7 +6,7 @@
#include <common.h>
#include <nand.h>
#include <malloc.h>
-#include "mxs_nand.h"
+#include <mxs_nand.h>
static struct mtd_info *mtd;
static struct nand_chip nand_chip;
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index ec929760ee..a3920ba520 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -163,11 +163,15 @@ const struct flash_info spi_nor_ids[] = {
{ INFO("n25q128a13", 0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
{ INFO("n25q256a", 0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ INFO("n25q256ax1", 0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { INFO6("mt25qu512a", 0x20bb20, 0x104400, 64 * 1024, 1024,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ INFO("n25q512a", 0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ INFO("n25q512ax3", 0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ INFO("n25q00", 0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ INFO("n25q00a", 0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ INFO("mt25qu02g", 0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
+ { INFO("mt35xu512aba", 0x2c5b1a, 0, 128 * 1024, 512, USE_FSR | SPI_NOR_4B_OPCODES) },
+ { INFO("mt35xu02g", 0x2c5b1c, 0, 128 * 1024, 2048, USE_FSR | SPI_NOR_4B_OPCODES) },
#endif
#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
/* Spansion/Cypress -- single (large) sector size only, at least
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 883b849b78..0a1d228a88 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -235,7 +235,7 @@ config FEC_MXC_MDIO_BASE
config FEC_MXC
bool "FEC Ethernet controller"
- depends on MX5 || MX6 || MX7 || IMX8 || VF610
+ depends on MX28 || MX5 || MX6 || MX7 || IMX8 || VF610
help
This driver supports the 10/100 Fast Ethernet controller for
NXP i.MX processors.
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index d7c080943a..96e3ad9a1a 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -1485,6 +1485,7 @@ static int fecmxc_ofdata_to_platdata(struct udevice *dev)
}
static const struct udevice_id fecmxc_ids[] = {
+ { .compatible = "fsl,imx28-fec" },
{ .compatible = "fsl,imx6q-fec" },
{ .compatible = "fsl,imx6sl-fec" },
{ .compatible = "fsl,imx6sx-fec" },
diff --git a/drivers/pinctrl/nxp/Kconfig b/drivers/pinctrl/nxp/Kconfig
index 61f93be42d..f2e67ca231 100644
--- a/drivers/pinctrl/nxp/Kconfig
+++ b/drivers/pinctrl/nxp/Kconfig
@@ -89,6 +89,16 @@ config PINCTRL_IMX8M
only parses the 'fsl,pins' property and configure related
registers.
+config PINCTRL_MXS
+ bool "NXP MXS pinctrl driver"
+ depends on ARCH_MX28 && PINCTRL_FULL
+ help
+ Say Y here to enable the i.MX mxs pinctrl driver
+
+ This option provides a simple pinctrl driver for i.MX mxs SoC
+ familiy, e.g. i.MX28. This feature depends on device tree
+ configuration.
+
config PINCTRL_VYBRID
bool "Vybrid (vf610) pinctrl driver"
depends on ARCH_VF610 && PINCTRL_FULL
diff --git a/drivers/pinctrl/nxp/Makefile b/drivers/pinctrl/nxp/Makefile
index b340d9448a..b86448aac9 100644
--- a/drivers/pinctrl/nxp/Makefile
+++ b/drivers/pinctrl/nxp/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_PINCTRL_IMX7ULP) += pinctrl-imx7ulp.o
obj-$(CONFIG_PINCTRL_IMX_SCU) += pinctrl-scu.o
obj-$(CONFIG_PINCTRL_IMX8) += pinctrl-imx8.o
obj-$(CONFIG_PINCTRL_IMX8M) += pinctrl-imx8m.o
+obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o
obj-$(CONFIG_PINCTRL_VYBRID) += pinctrl-vf610.o
diff --git a/drivers/pinctrl/nxp/pinctrl-mxs.c b/drivers/pinctrl/nxp/pinctrl-mxs.c
new file mode 100644
index 0000000000..6f6ca84674
--- /dev/null
+++ b/drivers/pinctrl/nxp/pinctrl-mxs.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+#include <common.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <dm.h>
+#include <dm/pinctrl.h>
+#include <dm/read.h>
+#include "pinctrl-mxs.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct mxs_pinctrl_priv {
+ void __iomem *base;
+ const struct mxs_regs *regs;
+};
+
+static unsigned long mxs_dt_node_to_map(struct udevice *conf)
+{
+ unsigned long config = 0;
+ int ret;
+ u32 val;
+
+ ret = dev_read_u32(conf, "fsl,drive-strength", &val);
+ if (!ret)
+ config = val | MA_PRESENT;
+
+ ret = dev_read_u32(conf, "fsl,voltage", &val);
+ if (!ret)
+ config |= val << VOL_SHIFT | VOL_PRESENT;
+
+ ret = dev_read_u32(conf, "fsl,pull-up", &val);
+ if (!ret)
+ config |= val << PULL_SHIFT | PULL_PRESENT;
+
+ return config;
+}
+
+static int mxs_pinctrl_set_mux(struct udevice *dev, u32 val, int bank, int pin)
+{
+ struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
+ int muxsel = MUXID_TO_MUXSEL(val), shift;
+ void __iomem *reg;
+
+ reg = iomux->base + iomux->regs->muxsel;
+ reg += bank * 0x20 + pin / 16 * 0x10;
+ shift = pin % 16 * 2;
+
+ mxs_pinctrl_rmwl(muxsel, 0x3, shift, reg);
+ debug(" mux %d,", muxsel);
+
+ return 0;
+}
+
+static int mxs_pinctrl_set_state(struct udevice *dev, struct udevice *conf)
+{
+ struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
+ u32 *pin_data, val, ma, vol, pull;
+ int npins, size, i, ret;
+ unsigned long config;
+
+ debug("\n%s: set state: %s\n", __func__, conf->name);
+
+ size = dev_read_size(conf, "fsl,pinmux-ids");
+ if (size < 0)
+ return size;
+
+ if (!size || size % sizeof(int)) {
+ dev_err(dev, "Invalid fsl,pinmux-ids property in %s\n",
+ conf->name);
+ return -EINVAL;
+ }
+
+ npins = size / sizeof(int);
+
+ pin_data = devm_kzalloc(dev, size, 0);
+ if (!pin_data)
+ return -ENOMEM;
+
+ ret = dev_read_u32_array(conf, "fsl,pinmux-ids", pin_data, npins);
+ if (ret) {
+ dev_err(dev, "Error reading pin data.\n");
+ devm_kfree(dev, pin_data);
+ return -EINVAL;
+ }
+
+ config = mxs_dt_node_to_map(conf);
+
+ ma = CONFIG_TO_MA(config);
+ vol = CONFIG_TO_VOL(config);
+ pull = CONFIG_TO_PULL(config);
+
+ for (i = 0; i < npins; i++) {
+ int pinid, bank, pin, shift;
+ void __iomem *reg;
+
+ val = pin_data[i];
+
+ pinid = MUXID_TO_PINID(val);
+ bank = PINID_TO_BANK(pinid);
+ pin = PINID_TO_PIN(pinid);
+
+ debug("(val: 0x%x) pin %d,", val, pinid);
+ /* Setup pinmux */
+ mxs_pinctrl_set_mux(dev, val, bank, pin);
+
+ debug(" ma: %d, vol: %d, pull: %d\n", ma, vol, pull);
+
+ /* drive */
+ reg = iomux->base + iomux->regs->drive;
+ reg += bank * 0x40 + pin / 8 * 0x10;
+
+ /* mA */
+ if (config & MA_PRESENT) {
+ shift = pin % 8 * 4;
+ mxs_pinctrl_rmwl(ma, 0x3, shift, reg);
+ }
+
+ /* vol */
+ if (config & VOL_PRESENT) {
+ shift = pin % 8 * 4 + 2;
+ if (vol)
+ writel(1 << shift, reg + SET);
+ else
+ writel(1 << shift, reg + CLR);
+ }
+
+ /* pull */
+ if (config & PULL_PRESENT) {
+ reg = iomux->base + iomux->regs->pull;
+ reg += bank * 0x10;
+ shift = pin;
+ if (pull)
+ writel(1 << shift, reg + SET);
+ else
+ writel(1 << shift, reg + CLR);
+ }
+ }
+
+ devm_kfree(dev, pin_data);
+ return 0;
+}
+
+static struct pinctrl_ops mxs_pinctrl_ops = {
+ .set_state = mxs_pinctrl_set_state,
+};
+
+static int mxs_pinctrl_probe(struct udevice *dev)
+{
+ struct mxs_pinctrl_priv *iomux = dev_get_priv(dev);
+
+ iomux->base = dev_read_addr_ptr(dev);
+ iomux->regs = (struct mxs_regs *)dev_get_driver_data(dev);
+
+ return 0;
+}
+
+static const struct mxs_regs imx23_regs = {
+ .muxsel = 0x100,
+ .drive = 0x200,
+ .pull = 0x400,
+};
+
+static const struct mxs_regs imx28_regs = {
+ .muxsel = 0x100,
+ .drive = 0x300,
+ .pull = 0x600,
+};
+
+static const struct udevice_id mxs_pinctrl_match[] = {
+ { .compatible = "fsl,imx23-pinctrl", .data = (ulong)&imx23_regs },
+ { .compatible = "fsl,imx28-pinctrl", .data = (ulong)&imx28_regs },
+ { /* sentinel */ }
+};
+
+U_BOOT_DRIVER(mxs_pinctrl) = {
+ .name = "mxs-pinctrl",
+ .id = UCLASS_PINCTRL,
+ .of_match = of_match_ptr(mxs_pinctrl_match),
+ .probe = mxs_pinctrl_probe,
+#if !CONFIG_IS_ENABLED(OF_PLATDATA)
+ .bind = dm_scan_fdt_dev,
+#endif
+ .priv_auto_alloc_size = sizeof(struct mxs_pinctrl_priv),
+ .ops = &mxs_pinctrl_ops,
+};
diff --git a/drivers/pinctrl/nxp/pinctrl-mxs.h b/drivers/pinctrl/nxp/pinctrl-mxs.h
new file mode 100644
index 0000000000..a398e43cbe
--- /dev/null
+++ b/drivers/pinctrl/nxp/pinctrl-mxs.h
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __PINCTRL_MXS_H
+#define __PINCTRL_MXS_H
+
+#include <dm/pinctrl.h>
+
+#define SET 0x4
+#define CLR 0x8
+#define TOG 0xc
+
+#define MXS_PINCTRL_PIN(pin) PINCTRL_PIN(pin, #pin)
+#define PINID(bank, pin) ((bank) * 32 + (pin))
+
+/*
+ * pinmux-id bit field definitions
+ *
+ * bank: 15..12 (4)
+ * pin: 11..4 (8)
+ * muxsel: 3..0 (4)
+ */
+#define MUXID_TO_PINID(m) PINID((m) >> 12 & 0xf, (m) >> 4 & 0xff)
+#define MUXID_TO_MUXSEL(m) ((m) & 0xf)
+
+#define PINID_TO_BANK(p) ((p) >> 5)
+#define PINID_TO_PIN(p) ((p) % 32)
+
+/*
+ * pin config bit field definitions
+ *
+ * pull-up: 6..5 (2)
+ * voltage: 4..3 (2)
+ * mA: 2..0 (3)
+ *
+ * MSB of each field is presence bit for the config.
+ */
+#define PULL_PRESENT (1 << 6)
+#define PULL_SHIFT 5
+#define VOL_PRESENT (1 << 4)
+#define VOL_SHIFT 3
+#define MA_PRESENT (1 << 2)
+#define MA_SHIFT 0
+#define CONFIG_TO_PULL(c) ((c) >> PULL_SHIFT & 0x1)
+#define CONFIG_TO_VOL(c) ((c) >> VOL_SHIFT & 0x1)
+#define CONFIG_TO_MA(c) ((c) >> MA_SHIFT & 0x3)
+
+struct mxs_regs {
+ u16 muxsel;
+ u16 drive;
+ u16 pull;
+};
+
+static inline void mxs_pinctrl_rmwl(u32 value, u32 mask, u8 shift,
+ void __iomem *reg)
+{
+ clrsetbits_le32(reg, mask << shift, value << shift);
+}
+#endif /* __PINCTRL_MXS_H */
diff --git a/drivers/power/pmic/bd71837.c b/drivers/power/pmic/bd71837.c
index 24d9f7fab7..e292d42a8c 100644
--- a/drivers/power/pmic/bd71837.c
+++ b/drivers/power/pmic/bd71837.c
@@ -3,6 +3,8 @@
* Copyright 2018 NXP
*/
+#define DEBUG
+
#include <common.h>
#include <errno.h>
#include <dm.h>
@@ -15,15 +17,15 @@ DECLARE_GLOBAL_DATA_PTR;
static const struct pmic_child_info pmic_children_info[] = {
/* buck */
- { .prefix = "b", .driver = BD71837_REGULATOR_DRIVER},
+ { .prefix = "b", .driver = BD718XX_REGULATOR_DRIVER},
/* ldo */
- { .prefix = "l", .driver = BD71837_REGULATOR_DRIVER},
+ { .prefix = "l", .driver = BD718XX_REGULATOR_DRIVER},
{ },
};
static int bd71837_reg_count(struct udevice *dev)
{
- return BD71837_REG_NUM;
+ return BD718XX_MAX_REGISTER - 1;
}
static int bd71837_write(struct udevice *dev, uint reg, const uint8_t *buff,
@@ -54,7 +56,7 @@ static int bd71837_bind(struct udevice *dev)
regulators_node = dev_read_subnode(dev, "regulators");
if (!ofnode_valid(regulators_node)) {
- debug("%s: %s regulators subnode not found!", __func__,
+ debug("%s: %s regulators subnode not found!\n", __func__,
dev->name);
return -ENXIO;
}
@@ -69,6 +71,24 @@ static int bd71837_bind(struct udevice *dev)
return 0;
}
+static int bd718x7_probe(struct udevice *dev)
+{
+ int ret;
+ uint8_t mask = BD718XX_REGLOCK_PWRSEQ | BD718XX_REGLOCK_VREG;
+
+ /* Unlock the PMIC regulator control before probing the children */
+ ret = pmic_clrsetbits(dev, BD718XX_REGLOCK, mask, 0);
+ if (ret) {
+ debug("%s: %s Failed to unlock regulator control\n", __func__,
+ dev->name);
+ return ret;
+ }
+ debug("%s: '%s' - BD718x7 PMIC registers unlocked\n", __func__,
+ dev->name);
+
+ return 0;
+}
+
static struct dm_pmic_ops bd71837_ops = {
.reg_count = bd71837_reg_count,
.read = bd71837_read,
@@ -76,7 +96,8 @@ static struct dm_pmic_ops bd71837_ops = {
};
static const struct udevice_id bd71837_ids[] = {
- { .compatible = "rohm,bd71837", .data = 0x4b, },
+ { .compatible = "rohm,bd71837", .data = ROHM_CHIP_TYPE_BD71837, },
+ { .compatible = "rohm,bd71847", .data = ROHM_CHIP_TYPE_BD71847, },
{ }
};
@@ -85,5 +106,6 @@ U_BOOT_DRIVER(pmic_bd71837) = {
.id = UCLASS_PMIC,
.of_match = bd71837_ids,
.bind = bd71837_bind,
+ .probe = bd718x7_probe,
.ops = &bd71837_ops,
};
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index 337e9e7471..9aa00fad42 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -43,6 +43,23 @@ config REGULATOR_AS3722
but does not yet support change voltages. Currently this must be
done using direct register writes to the PMIC.
+config DM_REGULATOR_BD71837
+ bool "Enable Driver Model for ROHM BD71837/BD71847 regulators"
+ depends on DM_REGULATOR && DM_PMIC_BD71837
+ help
+ This config enables implementation of driver-model regulator uclass
+ features for regulators on ROHM BD71837 and BD71847 PMICs.
+ BD71837 contains 8 bucks and 7 LDOS. BD71847 is reduced version
+ containing 6 bucks and 6 LDOs. The driver implements get/set api for
+ value and enable.
+
+config SPL_DM_REGULATOR_BD71837
+ bool "Enable Driver Model for ROHM BD71837/BD71847 regulators in SPL"
+ depends on DM_REGULATOR_BD71837
+ help
+ This config enables implementation of driver-model regulator uclass
+ features for regulators on ROHM BD71837 and BD71847 in SPL.
+
config DM_REGULATOR_PFUZE100
bool "Enable Driver Model for REGULATOR PFUZE100"
depends on DM_REGULATOR && DM_PMIC_PFUZE100
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index e728b73aee..6a3d4bbee4 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722_regulator.o
obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
+obj-$(CONFIG_$(SPL_)DM_REGULATOR_BD71837) += bd71837.o
obj-$(CONFIG_$(SPL_)REGULATOR_PWM) += pwm_regulator.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_$(SPL_)DM_REGULATOR_COMMON) += regulator_common.o
diff --git a/drivers/power/regulator/bd71837.c b/drivers/power/regulator/bd71837.c
new file mode 100644
index 0000000000..575429aa2d
--- /dev/null
+++ b/drivers/power/regulator/bd71837.c
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2019 ROHM Semiconductors
+ *
+ * ROHM BD71837 regulator driver
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <power/bd71837.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+
+#define HW_STATE_CONTROL 0
+#define DEBUG
+
+/**
+ * struct bd71837_vrange - describe linear range of voltages
+ *
+ * @min_volt: smallest voltage in range
+ * @step: how much voltage changes at each selector step
+ * @min_sel: smallest selector in the range
+ * @max_sel: maximum selector in the range
+ * @rangeval: register value used to select this range if selectible
+ * ranges are supported
+ */
+struct bd71837_vrange {
+ unsigned int min_volt;
+ unsigned int step;
+ u8 min_sel;
+ u8 max_sel;
+ u8 rangeval;
+};
+
+/**
+ * struct bd71837_platdata - describe regulator control registers
+ *
+ * @name: name of the regulator. Used for matching the dt-entry
+ * @enable_reg: register address used to enable/disable regulator
+ * @enablemask: register mask used to enable/disable regulator
+ * @volt_reg: register address used to configure regulator voltage
+ * @volt_mask: register mask used to configure regulator voltage
+ * @ranges: pointer to ranges of regulator voltages and matching register
+ * values
+ * @numranges: number of voltage ranges pointed by ranges
+ * @rangemask: mask for selecting used ranges if multiple ranges are supported
+ * @sel_mask: bit to toggle in order to transfer the register control to SW
+ * @dvs: whether the voltage can be changed when regulator is enabled
+ */
+struct bd71837_platdata {
+ const char *name;
+ u8 enable_reg;
+ u8 enablemask;
+ u8 volt_reg;
+ u8 volt_mask;
+ struct bd71837_vrange *ranges;
+ unsigned int numranges;
+ u8 rangemask;
+ u8 sel_mask;
+ bool dvs;
+};
+
+#define BD_RANGE(_min, _vstep, _sel_low, _sel_hi, _range_sel) \
+{ \
+ .min_volt = (_min), .step = (_vstep), .min_sel = (_sel_low), \
+ .max_sel = (_sel_hi), .rangeval = (_range_sel) \
+}
+
+#define BD_DATA(_name, enreg, enmask, vreg, vmask, _range, rmask, _dvs, sel) \
+{ \
+ .name = (_name), .enable_reg = (enreg), .enablemask = (enmask), \
+ .volt_reg = (vreg), .volt_mask = (vmask), .ranges = (_range), \
+ .numranges = ARRAY_SIZE(_range), .rangemask = (rmask), .dvs = (_dvs), \
+ .sel_mask = (sel) \
+}
+
+static struct bd71837_vrange dvs_buck_vranges[] = {
+ BD_RANGE(700000, 10000, 0, 0x3c, 0),
+ BD_RANGE(1300000, 0, 0x3d, 0x3f, 0),
+};
+
+static struct bd71837_vrange bd71847_buck3_vranges[] = {
+ BD_RANGE(700000, 100000, 0x00, 0x03, 0),
+ BD_RANGE(1050000, 50000, 0x04, 0x05, 0),
+ BD_RANGE(1200000, 150000, 0x06, 0x07, 0),
+ BD_RANGE(550000, 50000, 0x0, 0x7, 0x40),
+ BD_RANGE(675000, 100000, 0x0, 0x3, 0x80),
+ BD_RANGE(1025000, 50000, 0x4, 0x5, 0x80),
+ BD_RANGE(1175000, 150000, 0x6, 0x7, 0x80),
+};
+
+static struct bd71837_vrange bd71847_buck4_vranges[] = {
+ BD_RANGE(3000000, 100000, 0x00, 0x03, 0),
+ BD_RANGE(2600000, 100000, 0x00, 0x03, 40),
+};
+
+static struct bd71837_vrange bd71837_buck5_vranges[] = {
+ BD_RANGE(700000, 100000, 0, 0x3, 0),
+ BD_RANGE(1050000, 50000, 0x04, 0x05, 0),
+ BD_RANGE(1200000, 150000, 0x06, 0x07, 0),
+ BD_RANGE(675000, 100000, 0x0, 0x3, 0x80),
+ BD_RANGE(1025000, 50000, 0x04, 0x05, 0x80),
+ BD_RANGE(1175000, 150000, 0x06, 0x07, 0x80),
+};
+
+static struct bd71837_vrange bd71837_buck6_vranges[] = {
+ BD_RANGE(3000000, 100000, 0x00, 0x03, 0),
+};
+
+static struct bd71837_vrange nodvs_buck3_vranges[] = {
+ BD_RANGE(1605000, 90000, 0, 1, 0),
+ BD_RANGE(1755000, 45000, 2, 4, 0),
+ BD_RANGE(1905000, 45000, 5, 7, 0),
+};
+
+static struct bd71837_vrange nodvs_buck4_vranges[] = {
+ BD_RANGE(800000, 10000, 0x00, 0x3C, 0),
+};
+
+static struct bd71837_vrange ldo1_vranges[] = {
+ BD_RANGE(3000000, 100000, 0x00, 0x03, 0),
+ BD_RANGE(1600000, 100000, 0x00, 0x03, 0x20),
+};
+
+static struct bd71837_vrange ldo2_vranges[] = {
+ BD_RANGE(900000, 0, 0, 0, 0),
+ BD_RANGE(800000, 0, 1, 1, 0),
+};
+
+static struct bd71837_vrange ldo3_vranges[] = {
+ BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
+};
+
+static struct bd71837_vrange ldo4_vranges[] = {
+ BD_RANGE(900000, 100000, 0x00, 0x09, 0),
+};
+
+static struct bd71837_vrange bd71837_ldo5_vranges[] = {
+ BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
+};
+
+static struct bd71837_vrange bd71847_ldo5_vranges[] = {
+ BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
+ BD_RANGE(800000, 100000, 0x00, 0x0f, 0x20),
+};
+
+static struct bd71837_vrange ldo6_vranges[] = {
+ BD_RANGE(900000, 100000, 0x00, 0x09, 0),
+};
+
+static struct bd71837_vrange ldo7_vranges[] = {
+ BD_RANGE(1800000, 100000, 0x00, 0x0f, 0),
+};
+
+/*
+ * We use enable mask 'HW_STATE_CONTROL' to indicate that this regulator
+ * must not be enabled or disabled by SW. The typical use-case for BD71837
+ * is powering NXP i.MX8. In this use-case we (for now) only allow control
+ * for BUCK3 and BUCK4 which are not boot critical.
+ */
+static struct bd71837_platdata bd71837_reg_data[] = {
+/* Bucks 1-4 which support dynamic voltage scaling */
+ BD_DATA("BUCK1", BD718XX_BUCK1_CTRL, HW_STATE_CONTROL,
+ BD718XX_BUCK1_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
+ true, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK2", BD718XX_BUCK2_CTRL, HW_STATE_CONTROL,
+ BD718XX_BUCK2_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
+ true, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK3", BD71837_BUCK3_CTRL, BD718XX_BUCK_EN,
+ BD71837_BUCK3_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
+ true, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK4", BD71837_BUCK4_CTRL, BD718XX_BUCK_EN,
+ BD71837_BUCK4_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
+ true, BD718XX_BUCK_SEL),
+/* Bucks 5-8 which do not support dynamic voltage scaling */
+ BD_DATA("BUCK5", BD718XX_1ST_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
+ BD718XX_1ST_NODVS_BUCK_VOLT, BD718XX_1ST_NODVS_BUCK_MASK,
+ bd71837_buck5_vranges, 0x80, false, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK6", BD718XX_2ND_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
+ BD718XX_2ND_NODVS_BUCK_VOLT, BD71837_BUCK6_MASK,
+ bd71837_buck6_vranges, 0, false, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK7", BD718XX_3RD_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
+ BD718XX_3RD_NODVS_BUCK_VOLT, BD718XX_3RD_NODVS_BUCK_MASK,
+ nodvs_buck3_vranges, 0, false, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK8", BD718XX_4TH_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
+ BD718XX_4TH_NODVS_BUCK_VOLT, BD718XX_4TH_NODVS_BUCK_MASK,
+ nodvs_buck4_vranges, 0, false, BD718XX_BUCK_SEL),
+/* LDOs */
+ BD_DATA("LDO1", BD718XX_LDO1_VOLT, HW_STATE_CONTROL, BD718XX_LDO1_VOLT,
+ BD718XX_LDO1_MASK, ldo1_vranges, 0x20, false, BD718XX_LDO_SEL),
+ BD_DATA("LDO2", BD718XX_LDO2_VOLT, HW_STATE_CONTROL, BD718XX_LDO2_VOLT,
+ BD718XX_LDO2_MASK, ldo2_vranges, 0, false, BD718XX_LDO_SEL),
+ BD_DATA("LDO3", BD718XX_LDO3_VOLT, HW_STATE_CONTROL, BD718XX_LDO3_VOLT,
+ BD718XX_LDO3_MASK, ldo3_vranges, 0, false, BD718XX_LDO_SEL),
+ BD_DATA("LDO4", BD718XX_LDO4_VOLT, HW_STATE_CONTROL, BD718XX_LDO4_VOLT,
+ BD718XX_LDO4_MASK, ldo4_vranges, 0, false, BD718XX_LDO_SEL),
+ BD_DATA("LDO5", BD718XX_LDO5_VOLT, HW_STATE_CONTROL, BD718XX_LDO5_VOLT,
+ BD71837_LDO5_MASK, bd71837_ldo5_vranges, 0, false,
+ BD718XX_LDO_SEL),
+ BD_DATA("LDO6", BD718XX_LDO6_VOLT, HW_STATE_CONTROL, BD718XX_LDO6_VOLT,
+ BD718XX_LDO6_MASK, ldo6_vranges, 0, false, BD718XX_LDO_SEL),
+ BD_DATA("LDO7", BD71837_LDO7_VOLT, HW_STATE_CONTROL, BD71837_LDO7_VOLT,
+ BD71837_LDO7_MASK, ldo7_vranges, 0, false, BD718XX_LDO_SEL),
+};
+
+static struct bd71837_platdata bd71847_reg_data[] = {
+/* Bucks 1 and 2 which support dynamic voltage scaling */
+ BD_DATA("BUCK1", BD718XX_BUCK1_CTRL, HW_STATE_CONTROL,
+ BD718XX_BUCK1_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
+ true, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK2", BD718XX_BUCK2_CTRL, HW_STATE_CONTROL,
+ BD718XX_BUCK2_VOLT_RUN, DVS_BUCK_RUN_MASK, dvs_buck_vranges, 0,
+ true, BD718XX_BUCK_SEL),
+/* Bucks 3-6 which do not support dynamic voltage scaling */
+ BD_DATA("BUCK3", BD718XX_1ST_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
+ BD718XX_1ST_NODVS_BUCK_VOLT, BD718XX_1ST_NODVS_BUCK_MASK,
+ bd71847_buck3_vranges, 0xc0, false, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK4", BD718XX_2ND_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
+ BD718XX_2ND_NODVS_BUCK_VOLT, BD71837_BUCK6_MASK,
+ bd71847_buck4_vranges, 0x40, false, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK5", BD718XX_3RD_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
+ BD718XX_3RD_NODVS_BUCK_VOLT, BD718XX_3RD_NODVS_BUCK_MASK,
+ nodvs_buck3_vranges, 0, false, BD718XX_BUCK_SEL),
+ BD_DATA("BUCK6", BD718XX_4TH_NODVS_BUCK_CTRL, HW_STATE_CONTROL,
+ BD718XX_4TH_NODVS_BUCK_VOLT, BD718XX_4TH_NODVS_BUCK_MASK,
+ nodvs_buck4_vranges, 0, false, BD718XX_BUCK_SEL),
+/* LDOs */
+ BD_DATA("LDO1", BD718XX_LDO1_VOLT, HW_STATE_CONTROL, BD718XX_LDO1_VOLT,
+ BD718XX_LDO1_MASK, ldo1_vranges, 0x20, false, BD718XX_LDO_SEL),
+ BD_DATA("LDO2", BD718XX_LDO2_VOLT, HW_STATE_CONTROL, BD718XX_LDO2_VOLT,
+ BD718XX_LDO2_MASK, ldo2_vranges, 0, false, BD718XX_LDO_SEL),
+ BD_DATA("LDO3", BD718XX_LDO3_VOLT, HW_STATE_CONTROL, BD718XX_LDO3_VOLT,
+ BD718XX_LDO3_MASK, ldo3_vranges, 0, false, BD718XX_LDO_SEL),
+ BD_DATA("LDO4", BD718XX_LDO4_VOLT, HW_STATE_CONTROL, BD718XX_LDO4_VOLT,
+ BD718XX_LDO4_MASK, ldo4_vranges, 0, false, BD718XX_LDO_SEL),
+ BD_DATA("LDO5", BD718XX_LDO5_VOLT, HW_STATE_CONTROL, BD718XX_LDO5_VOLT,
+ BD71847_LDO5_MASK, bd71847_ldo5_vranges, 0x20, false,
+ BD718XX_LDO_SEL),
+ BD_DATA("LDO6", BD718XX_LDO6_VOLT, HW_STATE_CONTROL, BD718XX_LDO6_VOLT,
+ BD718XX_LDO6_MASK, ldo6_vranges, 0, false, BD718XX_LDO_SEL),
+};
+
+static int vrange_find_value(struct bd71837_vrange *r, unsigned int sel,
+ unsigned int *val)
+{
+ if (!val || sel < r->min_sel || sel > r->max_sel)
+ return -EINVAL;
+
+ *val = r->min_volt + r->step * (sel - r->min_sel);
+ return 0;
+}
+
+static int vrange_find_selector(struct bd71837_vrange *r, int val,
+ unsigned int *sel)
+{
+ int ret = -EINVAL;
+ int num_vals = r->max_sel - r->min_sel + 1;
+
+ if (val >= r->min_volt &&
+ val <= r->min_volt + r->step * (num_vals - 1)) {
+ if (r->step) {
+ *sel = r->min_sel + ((val - r->min_volt) / r->step);
+ ret = 0;
+ } else {
+ *sel = r->min_sel;
+ ret = 0;
+ }
+ }
+ return ret;
+}
+
+static int bd71837_get_enable(struct udevice *dev)
+{
+ int val;
+ struct bd71837_platdata *plat = dev_get_platdata(dev);
+
+ /*
+ * boot critical regulators on bd71837 must not be controlled by sw
+ * due to the 'feature' which leaves power rails down if bd71837 is
+ * reseted to snvs state. hence we can't get the state here.
+ *
+ * if we are alive it means we probably are on run state and
+ * if the regulator can't be controlled we can assume it is
+ * enabled.
+ */
+ if (plat->enablemask == HW_STATE_CONTROL)
+ return 1;
+
+ val = pmic_reg_read(dev->parent, plat->enable_reg);
+ if (val < 0)
+ return val;
+
+ return (val & plat->enablemask);
+}
+
+static int bd71837_set_enable(struct udevice *dev, bool enable)
+{
+ int val = 0;
+ struct bd71837_platdata *plat = dev_get_platdata(dev);
+
+ /*
+ * boot critical regulators on bd71837 must not be controlled by sw
+ * due to the 'feature' which leaves power rails down if bd71837 is
+ * reseted to snvs state. Hence we can't set the state here.
+ */
+ if (plat->enablemask == HW_STATE_CONTROL)
+ return -EINVAL;
+
+ if (enable)
+ val = plat->enablemask;
+
+ return pmic_clrsetbits(dev->parent, plat->enable_reg, plat->enablemask,
+ val);
+}
+
+static int bd71837_set_value(struct udevice *dev, int uvolt)
+{
+ unsigned int sel;
+ unsigned int range;
+ int i;
+ int found = 0;
+ struct bd71837_platdata *plat = dev_get_platdata(dev);
+
+ /*
+ * An under/overshooting may occur if voltage is changed for other
+ * regulators but buck 1,2,3 or 4 when regulator is enabled. Prevent
+ * change to protect the HW
+ */
+ if (!plat->dvs)
+ if (bd71837_get_enable(dev)) {
+ pr_err("Only DVS bucks can be changed when enabled\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < plat->numranges; i++) {
+ struct bd71837_vrange *r = &plat->ranges[i];
+
+ found = !vrange_find_selector(r, uvolt, &sel);
+ if (found) {
+ unsigned int tmp;
+
+ /*
+ * We require exactly the requested value to be
+ * supported - this can be changed later if needed
+ */
+ range = r->rangeval;
+ found = !vrange_find_value(r, sel, &tmp);
+ if (found && tmp == uvolt)
+ break;
+ found = 0;
+ }
+ }
+
+ if (!found)
+ return -EINVAL;
+
+ sel <<= ffs(plat->volt_mask) - 1;
+
+ if (plat->rangemask)
+ sel |= range;
+
+ return pmic_clrsetbits(dev->parent, plat->volt_reg, plat->volt_mask |
+ plat->rangemask, sel);
+}
+
+static int bd71837_get_value(struct udevice *dev)
+{
+ unsigned int reg, range;
+ unsigned int tmp;
+ struct bd71837_platdata *plat = dev_get_platdata(dev);
+ int i;
+
+ reg = pmic_reg_read(dev->parent, plat->volt_reg);
+ if (((int)reg) < 0)
+ return reg;
+
+ range = reg & plat->rangemask;
+
+ reg &= plat->volt_mask;
+ reg >>= ffs(plat->volt_mask) - 1;
+
+ for (i = 0; i < plat->numranges; i++) {
+ struct bd71837_vrange *r = &plat->ranges[i];
+
+ if (plat->rangemask && ((plat->rangemask & range) !=
+ r->rangeval))
+ continue;
+
+ if (!vrange_find_value(r, reg, &tmp))
+ return tmp;
+ }
+
+ pr_err("Unknown voltage value read from pmic\n");
+
+ return -EINVAL;
+}
+
+static int bd71837_regulator_probe(struct udevice *dev)
+{
+ struct bd71837_platdata *plat = dev_get_platdata(dev);
+ int i, ret;
+ struct dm_regulator_uclass_platdata *uc_pdata;
+ int type;
+ struct bd71837_platdata *init_data;
+ int data_amnt;
+
+ type = dev_get_driver_data(dev_get_parent(dev));
+
+ switch (type) {
+ case ROHM_CHIP_TYPE_BD71837:
+ init_data = bd71837_reg_data;
+ data_amnt = ARRAY_SIZE(bd71837_reg_data);
+ break;
+ case ROHM_CHIP_TYPE_BD71847:
+ init_data = bd71847_reg_data;
+ data_amnt = ARRAY_SIZE(bd71847_reg_data);
+ break;
+ default:
+ debug("Unknown PMIC type\n");
+ init_data = NULL;
+ data_amnt = 0;
+ break;
+ }
+
+ for (i = 0; i < data_amnt; i++) {
+ if (!strcmp(dev->name, init_data[i].name)) {
+ *plat = init_data[i];
+ if (plat->enablemask != HW_STATE_CONTROL) {
+ /*
+ * Take the regulator under SW control. Ensure
+ * the initial state matches dt flags and then
+ * write the SEL bit
+ */
+ uc_pdata = dev_get_uclass_platdata(dev);
+ ret = bd71837_set_enable(dev,
+ !!(uc_pdata->boot_on ||
+ uc_pdata->always_on));
+ if (ret)
+ return ret;
+
+ return pmic_clrsetbits(dev->parent,
+ plat->enable_reg,
+ plat->sel_mask,
+ plat->sel_mask);
+ }
+ return 0;
+ }
+ }
+
+ pr_err("Unknown regulator '%s'\n", dev->name);
+
+ return -ENOENT;
+}
+
+static const struct dm_regulator_ops bd71837_regulator_ops = {
+ .get_value = bd71837_get_value,
+ .set_value = bd71837_set_value,
+ .get_enable = bd71837_get_enable,
+ .set_enable = bd71837_set_enable,
+};
+
+U_BOOT_DRIVER(bd71837_regulator) = {
+ .name = BD718XX_REGULATOR_DRIVER,
+ .id = UCLASS_REGULATOR,
+ .ops = &bd71837_regulator_ops,
+ .probe = bd71837_regulator_probe,
+ .platdata_auto_alloc_size = sizeof(struct bd71837_platdata),
+};
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 2984b79766..1f36fc78fa 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -18,6 +18,11 @@ config PWM_EXYNOS
used. It provides 5 channels which can be independently
programmed. Channel 4 (the last) is normally used as a timer.
+config PWM_IMX
+ bool "Enable support for i.MX27 and later PWM"
+ help
+ This PWM is found i.MX27 and later i.MX SoCs.
+
config PWM_ROCKCHIP
bool "Enable support for the Rockchip PWM"
depends on DM_PWM
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 83c1bfa820..8d8f3e6f9f 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -8,6 +8,7 @@
#include <common.h>
#include <div64.h>
+#include <dm.h>
#include <pwm.h>
#include <asm/arch/imx-regs.h>
#include <asm/io.h>
@@ -24,18 +25,12 @@ int pwm_init(int pwm_id, int div, int invert)
return 0;
}
-int pwm_config(int pwm_id, int duty_ns, int period_ns)
+int pwm_config_internal(struct pwm_regs *pwm, unsigned long period_cycles,
+ unsigned long duty_cycles, unsigned long prescale)
{
- struct pwm_regs *pwm = (struct pwm_regs *)pwm_id_to_reg(pwm_id);
- unsigned long period_cycles, duty_cycles, prescale;
u32 cr;
- if (!pwm)
- return -1;
-
- pwm_imx_get_parms(period_ns, duty_ns, &period_cycles, &duty_cycles,
- &prescale);
-
+ writel(0, &pwm->ir);
cr = PWMCR_PRESCALER(prescale) |
PWMCR_DOZEEN | PWMCR_WAITEN |
PWMCR_DBGEN | PWMCR_CLKSRC_IPG_HIGH;
@@ -48,6 +43,20 @@ int pwm_config(int pwm_id, int duty_ns, int period_ns)
return 0;
}
+int pwm_config(int pwm_id, int duty_ns, int period_ns)
+{
+ struct pwm_regs *pwm = (struct pwm_regs *)pwm_id_to_reg(pwm_id);
+ unsigned long period_cycles, duty_cycles, prescale;
+
+ if (!pwm)
+ return -1;
+
+ pwm_imx_get_parms(period_ns, duty_ns, &period_cycles, &duty_cycles,
+ &prescale);
+
+ return pwm_config_internal(pwm, period_cycles, duty_cycles, prescale);
+}
+
int pwm_enable(int pwm_id)
{
struct pwm_regs *pwm = (struct pwm_regs *)pwm_id_to_reg(pwm_id);
@@ -68,3 +77,86 @@ void pwm_disable(int pwm_id)
clrbits_le32(&pwm->cr, PWMCR_EN);
}
+
+#if defined(CONFIG_DM_PWM)
+struct imx_pwm_priv {
+ struct pwm_regs *regs;
+ bool invert;
+};
+
+static int imx_pwm_set_invert(struct udevice *dev, uint channel,
+ bool polarity)
+{
+ struct imx_pwm_priv *priv = dev_get_priv(dev);
+
+ debug("%s: polarity=%u\n", __func__, polarity);
+ priv->invert = polarity;
+
+ return 0;
+}
+
+static int imx_pwm_set_config(struct udevice *dev, uint channel,
+ uint period_ns, uint duty_ns)
+{
+ struct imx_pwm_priv *priv = dev_get_priv(dev);
+ struct pwm_regs *regs = priv->regs;
+ unsigned long period_cycles, duty_cycles, prescale;
+
+ debug("%s: Config '%s' channel: %d\n", __func__, dev->name, channel);
+
+ pwm_imx_get_parms(period_ns, duty_ns, &period_cycles, &duty_cycles,
+ &prescale);
+
+ return pwm_config_internal(regs, period_cycles, duty_cycles, prescale);
+};
+
+static int imx_pwm_set_enable(struct udevice *dev, uint channel, bool enable)
+{
+ struct imx_pwm_priv *priv = dev_get_priv(dev);
+ struct pwm_regs *regs = priv->regs;
+
+ debug("%s: Enable '%s' state: %d\n", __func__, dev->name, enable);
+
+ if (enable)
+ setbits_le32(&regs->cr, PWMCR_EN);
+ else
+ clrbits_le32(&regs->cr, PWMCR_EN);
+
+ return 0;
+};
+
+static int imx_pwm_ofdata_to_platdata(struct udevice *dev)
+{
+ struct imx_pwm_priv *priv = dev_get_priv(dev);
+
+ priv->regs = (struct pwm_regs *)devfdt_get_addr(dev);
+
+ return 0;
+}
+
+static int imx_pwm_probe(struct udevice *dev)
+{
+ return 0;
+}
+
+static const struct pwm_ops imx_pwm_ops = {
+ .set_invert = imx_pwm_set_invert,
+ .set_config = imx_pwm_set_config,
+ .set_enable = imx_pwm_set_enable,
+};
+
+static const struct udevice_id imx_pwm_ids[] = {
+ { .compatible = "fsl,imx27-pwm" },
+ { }
+};
+
+U_BOOT_DRIVER(imx_pwm) = {
+ .name = "imx_pwm",
+ .id = UCLASS_PWM,
+ .of_match = imx_pwm_ids,
+ .ops = &imx_pwm_ops,
+ .ofdata_to_platdata = imx_pwm_ofdata_to_platdata,
+ .probe = imx_pwm_probe,
+ .priv_auto_alloc_size = sizeof(struct imx_pwm_priv),
+};
+#endif
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index a435e68005..42abb96a26 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -342,6 +342,8 @@ static int mxc_serial_ofdata_to_platdata(struct udevice *dev)
}
static const struct udevice_id mxc_serial_ids[] = {
+ { .compatible = "fsl,imx21-uart" },
+ { .compatible = "fsl,imx53-uart" },
{ .compatible = "fsl,imx6sx-uart" },
{ .compatible = "fsl,imx6ul-uart" },
{ .compatible = "fsl,imx7d-uart" },
@@ -360,9 +362,7 @@ U_BOOT_DRIVER(serial_mxc) = {
#endif
.probe = mxc_serial_probe,
.ops = &mxc_serial_ops,
-#if !CONFIG_IS_ENABLED(OF_CONTROL)
.flags = DM_FLAG_PRE_RELOC,
-#endif
};
#endif
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index cc174dd036..f459c0a411 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -158,13 +158,14 @@ config MT7621_SPI
the SPI NOR flash on platforms embedding this Ralink / MediaTek
SPI core, like MT7621/7628/7688.
-config MTK_QSPI
- bool "Mediatek QSPI driver"
- imply SPI_FLASH_BAR
+config MTK_SNFI_SPI
+ bool "Mediatek SPI memory controller driver"
+ depends on SPI_MEM
help
- Enable the Mediatek QSPI driver. This driver can be
- used to access the SPI NOR flash on platforms embedding this
- Mediatek QSPI IP core.
+ Enable the Mediatek SPI memory controller driver. This driver is
+ originally based on the MediaTek SNFI IP core. It can only be
+ used to access SPI memory devices like SPI-NOR or SPI-NAND on
+ platforms embedding this IP core, like MT7622/M7629.
config MVEBU_A3700_SPI
bool "Marvell Armada 3700 SPI driver"
@@ -232,6 +233,14 @@ config SANDBOX_SPI
};
};
+config SPI_SIFIVE
+ bool "SiFive SPI driver"
+ help
+ This driver supports the SiFive SPI IP. If unsure say N.
+ Enable the SiFive SPI controller driver.
+
+ The SiFive SPI controller driver is found on various SiFive SoCs.
+
config SPI_SUNXI
bool "Allwinner SoC SPI controllers"
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index ab84122f08..ae4f2958f8 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -37,7 +37,7 @@ obj-$(CONFIG_LPC32XX_SSP) += lpc32xx_ssp.o
obj-$(CONFIG_MESON_SPIFC) += meson_spifc.o
obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o
obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
-obj-$(CONFIG_MTK_QSPI) += mtk_qspi.o
+obj-$(CONFIG_MTK_SNFI_SPI) += mtk_snfi_spi.o
obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o
obj-$(CONFIG_MSCC_BB_SPI) += mscc_bb_spi.o
obj-$(CONFIG_MVEBU_A3700_SPI) += mvebu_a3700_spi.o
@@ -50,6 +50,7 @@ obj-$(CONFIG_PL022_SPI) += pl022_spi.o
obj-$(CONFIG_RENESAS_RPC_SPI) += renesas_rpc_spi.o
obj-$(CONFIG_ROCKCHIP_SPI) += rk_spi.o
obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o
+obj-$(CONFIG_SPI_SIFIVE) += spi-sifive.o
obj-$(CONFIG_SPI_SUNXI) += spi-sunxi.o
obj-$(CONFIG_SH_SPI) += sh_spi.o
obj-$(CONFIG_SH_QSPI) += sh_qspi.o
diff --git a/drivers/spi/fsl_qspi.c b/drivers/spi/fsl_qspi.c
index 1598c4f698..41abe1996f 100644
--- a/drivers/spi/fsl_qspi.c
+++ b/drivers/spi/fsl_qspi.c
@@ -10,6 +10,7 @@
#include <spi.h>
#include <asm/io.h>
#include <linux/sizes.h>
+#include <linux/iopoll.h>
#include <dm.h>
#include <errno.h>
#include <watchdog.h>
@@ -150,20 +151,13 @@ static void qspi_write32(u32 flags, u32 *addr, u32 val)
static inline int is_controller_busy(const struct fsl_qspi_priv *priv)
{
u32 val;
- const u32 mask = QSPI_SR_BUSY_MASK | QSPI_SR_AHB_ACC_MASK |
- QSPI_SR_IP_ACC_MASK;
- unsigned int retry = 5;
+ u32 mask = QSPI_SR_BUSY_MASK | QSPI_SR_AHB_ACC_MASK |
+ QSPI_SR_IP_ACC_MASK;
- do {
- val = qspi_read32(priv->flags, &priv->regs->sr);
+ if (priv->flags & QSPI_FLAG_REGMAP_ENDIAN_BIG)
+ mask = (u32)cpu_to_be32(mask);
- if ((~val & mask) == mask)
- return 0;
-
- udelay(1);
- } while (--retry);
-
- return -ETIMEDOUT;
+ return readl_poll_timeout(&priv->regs->sr, val, !(val & mask), 1000);
}
/* QSPI support swapping the flash read/write data
diff --git a/drivers/spi/mtk_qspi.c b/drivers/spi/mtk_qspi.c
deleted file mode 100644
index b510733e92..0000000000
--- a/drivers/spi/mtk_qspi.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018 MediaTek, Inc.
- * Author : Guochun.Mao@mediatek.com
- */
-
-#include <common.h>
-#include <dm.h>
-#include <malloc.h>
-#include <spi.h>
-#include <asm/io.h>
-#include <linux/iopoll.h>
-#include <linux/ioport.h>
-
-/* Register Offset */
-struct mtk_qspi_regs {
- u32 cmd;
- u32 cnt;
- u32 rdsr;
- u32 rdata;
- u32 radr[3];
- u32 wdata;
- u32 prgdata[6];
- u32 shreg[10];
- u32 cfg[2];
- u32 shreg10;
- u32 mode_mon;
- u32 status[4];
- u32 flash_time;
- u32 flash_cfg;
- u32 reserved_0[3];
- u32 sf_time;
- u32 pp_dw_data;
- u32 reserved_1;
- u32 delsel_0[2];
- u32 intrstus;
- u32 intren;
- u32 reserved_2;
- u32 cfg3;
- u32 reserved_3;
- u32 chksum;
- u32 aaicmd;
- u32 wrprot;
- u32 radr3;
- u32 dual;
- u32 delsel_1[3];
-};
-
-struct mtk_qspi_platdata {
- fdt_addr_t reg_base;
- fdt_addr_t mem_base;
-};
-
-struct mtk_qspi_priv {
- struct mtk_qspi_regs *regs;
- unsigned long *mem_base;
- u8 op;
- u8 tx[3]; /* only record max 3 bytes paras, when it's address. */
- u32 txlen; /* dout buffer length - op code length */
- u8 *rx;
- u32 rxlen;
-};
-
-#define MTK_QSPI_CMD_POLLINGREG_US 500000
-#define MTK_QSPI_WRBUF_SIZE 256
-#define MTK_QSPI_COMMAND_ENABLE 0x30
-
-/* NOR flash controller commands */
-#define MTK_QSPI_RD_TRIGGER BIT(0)
-#define MTK_QSPI_READSTATUS BIT(1)
-#define MTK_QSPI_PRG_CMD BIT(2)
-#define MTK_QSPI_WR_TRIGGER BIT(4)
-#define MTK_QSPI_WRITESTATUS BIT(5)
-#define MTK_QSPI_AUTOINC BIT(7)
-
-#define MTK_QSPI_MAX_RX_TX_SHIFT 0x6
-#define MTK_QSPI_MAX_SHIFT 0x8
-
-#define MTK_QSPI_WR_BUF_ENABLE 0x1
-#define MTK_QSPI_WR_BUF_DISABLE 0x0
-
-static int mtk_qspi_execute_cmd(struct mtk_qspi_priv *priv, u8 cmd)
-{
- u8 tmp;
- u8 val = cmd & ~MTK_QSPI_AUTOINC;
-
- writeb(cmd, &priv->regs->cmd);
-
- return readb_poll_timeout(&priv->regs->cmd, tmp, !(val & tmp),
- MTK_QSPI_CMD_POLLINGREG_US);
-}
-
-static int mtk_qspi_tx_rx(struct mtk_qspi_priv *priv)
-{
- int len = 1 + priv->txlen + priv->rxlen;
- int i, ret, idx;
-
- if (len > MTK_QSPI_MAX_SHIFT)
- return -ERR_INVAL;
-
- writeb(len * 8, &priv->regs->cnt);
-
- /* start at PRGDATA5, go down to PRGDATA0 */
- idx = MTK_QSPI_MAX_RX_TX_SHIFT - 1;
-
- /* opcode */
- writeb(priv->op, &priv->regs->prgdata[idx]);
- idx--;
-
- /* program TX data */
- for (i = 0; i < priv->txlen; i++, idx--)
- writeb(priv->tx[i], &priv->regs->prgdata[idx]);
-
- /* clear out rest of TX registers */
- while (idx >= 0) {
- writeb(0, &priv->regs->prgdata[idx]);
- idx--;
- }
-
- ret = mtk_qspi_execute_cmd(priv, MTK_QSPI_PRG_CMD);
- if (ret)
- return ret;
-
- /* restart at first RX byte */
- idx = priv->rxlen - 1;
-
- /* read out RX data */
- for (i = 0; i < priv->rxlen; i++, idx--)
- priv->rx[i] = readb(&priv->regs->shreg[idx]);
-
- return 0;
-}
-
-static int mtk_qspi_read(struct mtk_qspi_priv *priv,
- u32 addr, u8 *buf, u32 len)
-{
- memcpy(buf, (u8 *)priv->mem_base + addr, len);
- return 0;
-}
-
-static void mtk_qspi_set_addr(struct mtk_qspi_priv *priv, u32 addr)
-{
- int i;
-
- for (i = 0; i < 3; i++) {
- writeb(addr & 0xff, &priv->regs->radr[i]);
- addr >>= 8;
- }
-}
-
-static int mtk_qspi_write_single_byte(struct mtk_qspi_priv *priv,
- u32 addr, u32 length, const u8 *data)
-{
- int i, ret;
-
- mtk_qspi_set_addr(priv, addr);
-
- for (i = 0; i < length; i++) {
- writeb(*data++, &priv->regs->wdata);
- ret = mtk_qspi_execute_cmd(priv, MTK_QSPI_WR_TRIGGER);
- if (ret < 0)
- return ret;
- }
- return 0;
-}
-
-static int mtk_qspi_write_buffer(struct mtk_qspi_priv *priv, u32 addr,
- const u8 *buf)
-{
- int i, data;
-
- mtk_qspi_set_addr(priv, addr);
-
- for (i = 0; i < MTK_QSPI_WRBUF_SIZE; i += 4) {
- data = buf[i + 3] << 24 | buf[i + 2] << 16 |
- buf[i + 1] << 8 | buf[i];
- writel(data, &priv->regs->pp_dw_data);
- }
-
- return mtk_qspi_execute_cmd(priv, MTK_QSPI_WR_TRIGGER);
-}
-
-static int mtk_qspi_write(struct mtk_qspi_priv *priv,
- u32 addr, const u8 *buf, u32 len)
-{
- int ret;
-
- /* setting pre-fetch buffer for page program */
- writel(MTK_QSPI_WR_BUF_ENABLE, &priv->regs->cfg[1]);
- while (len >= MTK_QSPI_WRBUF_SIZE) {
- ret = mtk_qspi_write_buffer(priv, addr, buf);
- if (ret < 0)
- return ret;
-
- len -= MTK_QSPI_WRBUF_SIZE;
- addr += MTK_QSPI_WRBUF_SIZE;
- buf += MTK_QSPI_WRBUF_SIZE;
- }
- /* disable pre-fetch buffer for page program */
- writel(MTK_QSPI_WR_BUF_DISABLE, &priv->regs->cfg[1]);
-
- if (len)
- return mtk_qspi_write_single_byte(priv, addr, len, buf);
-
- return 0;
-}
-
-static int mtk_qspi_claim_bus(struct udevice *dev)
-{
- /* nothing to do */
- return 0;
-}
-
-static int mtk_qspi_release_bus(struct udevice *dev)
-{
- /* nothing to do */
- return 0;
-}
-
-static int mtk_qspi_transfer(struct mtk_qspi_priv *priv, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
-{
- u32 bytes = DIV_ROUND_UP(bitlen, 8);
- u32 addr;
-
- if (!bytes)
- return -ERR_INVAL;
-
- if (dout) {
- if (flags & SPI_XFER_BEGIN) {
- /* parse op code and potential paras first */
- priv->op = *(u8 *)dout;
- if (bytes > 1)
- memcpy(priv->tx, (u8 *)dout + 1,
- bytes <= 4 ? bytes - 1 : 3);
- priv->txlen = bytes - 1;
- }
-
- if (flags == SPI_XFER_ONCE) {
- /* operations without receiving or sending data.
- * for example: erase, write flash register or write
- * enable...
- */
- priv->rx = NULL;
- priv->rxlen = 0;
- return mtk_qspi_tx_rx(priv);
- }
-
- if (flags & SPI_XFER_END) {
- /* here, dout should be data to be written.
- * and priv->tx should be filled 3Bytes address.
- */
- addr = priv->tx[0] << 16 | priv->tx[1] << 8 |
- priv->tx[2];
- return mtk_qspi_write(priv, addr, (u8 *)dout, bytes);
- }
- }
-
- if (din) {
- if (priv->txlen >= 3) {
- /* if run to here, priv->tx[] should be the address
- * where read data from,
- * and, din is the buf to receive data.
- */
- addr = priv->tx[0] << 16 | priv->tx[1] << 8 |
- priv->tx[2];
- return mtk_qspi_read(priv, addr, (u8 *)din, bytes);
- }
-
- /* should be reading flash's register */
- priv->rx = (u8 *)din;
- priv->rxlen = bytes;
- return mtk_qspi_tx_rx(priv);
- }
-
- return 0;
-}
-
-static int mtk_qspi_xfer(struct udevice *dev, unsigned int bitlen,
- const void *dout, void *din, unsigned long flags)
-{
- struct udevice *bus = dev->parent;
- struct mtk_qspi_priv *priv = dev_get_priv(bus);
-
- return mtk_qspi_transfer(priv, bitlen, dout, din, flags);
-}
-
-static int mtk_qspi_set_speed(struct udevice *bus, uint speed)
-{
- /* nothing to do */
- return 0;
-}
-
-static int mtk_qspi_set_mode(struct udevice *bus, uint mode)
-{
- /* nothing to do */
- return 0;
-}
-
-static int mtk_qspi_ofdata_to_platdata(struct udevice *bus)
-{
- struct resource res_reg, res_mem;
- struct mtk_qspi_platdata *plat = bus->platdata;
- int ret;
-
- ret = dev_read_resource_byname(bus, "reg_base", &res_reg);
- if (ret) {
- debug("can't get reg_base resource(ret = %d)\n", ret);
- return -ENOMEM;
- }
-
- ret = dev_read_resource_byname(bus, "mem_base", &res_mem);
- if (ret) {
- debug("can't get map_base resource(ret = %d)\n", ret);
- return -ENOMEM;
- }
-
- plat->mem_base = res_mem.start;
- plat->reg_base = res_reg.start;
-
- return 0;
-}
-
-static int mtk_qspi_probe(struct udevice *bus)
-{
- struct mtk_qspi_platdata *plat = dev_get_platdata(bus);
- struct mtk_qspi_priv *priv = dev_get_priv(bus);
-
- priv->regs = (struct mtk_qspi_regs *)plat->reg_base;
- priv->mem_base = (unsigned long *)plat->mem_base;
-
- writel(MTK_QSPI_COMMAND_ENABLE, &priv->regs->wrprot);
-
- return 0;
-}
-
-static const struct dm_spi_ops mtk_qspi_ops = {
- .claim_bus = mtk_qspi_claim_bus,
- .release_bus = mtk_qspi_release_bus,
- .xfer = mtk_qspi_xfer,
- .set_speed = mtk_qspi_set_speed,
- .set_mode = mtk_qspi_set_mode,
-};
-
-static const struct udevice_id mtk_qspi_ids[] = {
- { .compatible = "mediatek,mt7629-qspi" },
- { }
-};
-
-U_BOOT_DRIVER(mtk_qspi) = {
- .name = "mtk_qspi",
- .id = UCLASS_SPI,
- .of_match = mtk_qspi_ids,
- .ops = &mtk_qspi_ops,
- .ofdata_to_platdata = mtk_qspi_ofdata_to_platdata,
- .platdata_auto_alloc_size = sizeof(struct mtk_qspi_platdata),
- .priv_auto_alloc_size = sizeof(struct mtk_qspi_priv),
- .probe = mtk_qspi_probe,
-};
diff --git a/drivers/spi/mtk_snfi_spi.c b/drivers/spi/mtk_snfi_spi.c
new file mode 100644
index 0000000000..2a89476515
--- /dev/null
+++ b/drivers/spi/mtk_snfi_spi.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 MediaTek Inc. All Rights Reserved.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <errno.h>
+#include <spi.h>
+#include <spi-mem.h>
+#include <stdbool.h>
+#include <watchdog.h>
+#include <dm/pinctrl.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#define SNFI_MAC_CTL 0x500
+#define MAC_XIO_SEL BIT(4)
+#define SF_MAC_EN BIT(3)
+#define SF_TRIG BIT(2)
+#define WIP_READY BIT(1)
+#define WIP BIT(0)
+
+#define SNFI_MAC_OUTL 0x504
+#define SNFI_MAC_INL 0x508
+
+#define SNFI_MISC_CTL 0x538
+#define SW_RST BIT(28)
+#define FIFO_RD_LTC_SHIFT 25
+#define FIFO_RD_LTC GENMASK(26, 25)
+#define LATCH_LAT_SHIFT 8
+#define LATCH_LAT GENMASK(9, 8)
+#define CS_DESELECT_CYC_SHIFT 0
+#define CS_DESELECT_CYC GENMASK(4, 0)
+
+#define SNF_STA_CTL1 0x550
+#define SPI_STATE GENMASK(3, 0)
+
+#define SNFI_GPRAM_OFFSET 0x800
+#define SNFI_GPRAM_SIZE 0x80
+
+#define SNFI_POLL_INTERVAL 500000
+#define SNFI_RST_POLL_INTERVAL 1000000
+
+struct mtk_snfi_priv {
+ void __iomem *base;
+
+ struct clk nfi_clk;
+ struct clk pad_clk;
+};
+
+static int mtk_snfi_adjust_op_size(struct spi_slave *slave,
+ struct spi_mem_op *op)
+{
+ u32 nbytes;
+
+ /*
+ * When there is input data, it will be appended after the output
+ * data in the GPRAM. So the total size of either pure output data
+ * or the output+input data must not exceed the GPRAM size.
+ */
+
+ nbytes = sizeof(op->cmd.opcode) + op->addr.nbytes +
+ op->dummy.nbytes;
+
+ if (nbytes + op->data.nbytes <= SNFI_GPRAM_SIZE)
+ return 0;
+
+ if (nbytes >= SNFI_GPRAM_SIZE)
+ return -ENOTSUPP;
+
+ op->data.nbytes = SNFI_GPRAM_SIZE - nbytes;
+
+ return 0;
+}
+
+static bool mtk_snfi_supports_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ if (op->cmd.buswidth > 1 || op->addr.buswidth > 1 ||
+ op->dummy.buswidth > 1 || op->data.buswidth > 1)
+ return false;
+
+ return true;
+}
+
+static int mtk_snfi_mac_trigger(struct mtk_snfi_priv *priv,
+ struct udevice *bus, u32 outlen, u32 inlen)
+{
+ int ret;
+ u32 val;
+
+#ifdef CONFIG_PINCTRL
+ pinctrl_select_state(bus, "snfi");
+#endif
+
+ writel(SF_MAC_EN, priv->base + SNFI_MAC_CTL);
+ writel(outlen, priv->base + SNFI_MAC_OUTL);
+ writel(inlen, priv->base + SNFI_MAC_INL);
+
+ writel(SF_MAC_EN | SF_TRIG, priv->base + SNFI_MAC_CTL);
+
+ ret = readl_poll_timeout(priv->base + SNFI_MAC_CTL, val,
+ val & WIP_READY, SNFI_POLL_INTERVAL);
+ if (ret) {
+ printf("%s: timed out waiting for WIP_READY\n", __func__);
+ goto cleanup;
+ }
+
+ ret = readl_poll_timeout(priv->base + SNFI_MAC_CTL, val,
+ !(val & WIP), SNFI_POLL_INTERVAL);
+ if (ret)
+ printf("%s: timed out waiting for WIP cleared\n", __func__);
+
+ writel(0, priv->base + SNFI_MAC_CTL);
+
+cleanup:
+#ifdef CONFIG_PINCTRL
+ pinctrl_select_state(bus, "default");
+#endif
+
+ return ret;
+}
+
+static int mtk_snfi_mac_reset(struct mtk_snfi_priv *priv)
+{
+ int ret;
+ u32 val;
+
+ setbits_32(priv->base + SNFI_MISC_CTL, SW_RST);
+
+ ret = readl_poll_timeout(priv->base + SNF_STA_CTL1, val,
+ !(val & SPI_STATE), SNFI_POLL_INTERVAL);
+ if (ret)
+ printf("%s: failed to reset snfi mac\n", __func__);
+
+ writel((2 << FIFO_RD_LTC_SHIFT) |
+ (10 << CS_DESELECT_CYC_SHIFT),
+ priv->base + SNFI_MISC_CTL);
+
+ return ret;
+}
+
+static void mtk_snfi_copy_to_gpram(struct mtk_snfi_priv *priv,
+ const void *data, size_t len)
+{
+ void __iomem *gpram = priv->base + SNFI_GPRAM_OFFSET;
+ size_t i, n = (len + sizeof(u32) - 1) / sizeof(u32);
+ const u32 *buff = data;
+
+ /*
+ * The output data will always be copied to the beginning of
+ * the GPRAM. Uses word write for better performace.
+ *
+ * Trailing bytes in the last word are not cared.
+ */
+
+ for (i = 0; i < n; i++)
+ writel(buff[i], gpram + i * sizeof(u32));
+}
+
+static void mtk_snfi_copy_from_gpram(struct mtk_snfi_priv *priv, u8 *cache,
+ void *data, size_t pos, size_t len)
+{
+ void __iomem *gpram = priv->base + SNFI_GPRAM_OFFSET;
+ u32 *buff = (u32 *)cache;
+ size_t i, off, end;
+
+ /* Start position in the buffer */
+ off = pos & (sizeof(u32) - 1);
+
+ /* End position for copy */
+ end = (len + pos + sizeof(u32) - 1) & (~(sizeof(u32) - 1));
+
+ /* Start position for copy */
+ pos &= ~(sizeof(u32) - 1);
+
+ /*
+ * Read aligned data from GPRAM to buffer first.
+ * Uses word read for better performace.
+ */
+ i = 0;
+ while (pos < end) {
+ buff[i++] = readl(gpram + pos);
+ pos += sizeof(u32);
+ }
+
+ /* Copy rx data */
+ memcpy(data, cache + off, len);
+}
+
+static int mtk_snfi_exec_op(struct spi_slave *slave,
+ const struct spi_mem_op *op)
+{
+ struct udevice *bus = dev_get_parent(slave->dev);
+ struct mtk_snfi_priv *priv = dev_get_priv(bus);
+ u8 gpram_cache[SNFI_GPRAM_SIZE];
+ u32 i, len = 0, inlen = 0;
+ int addr_sh;
+ int ret;
+
+ WATCHDOG_RESET();
+
+ ret = mtk_snfi_mac_reset(priv);
+ if (ret)
+ return ret;
+
+ /* Put opcode */
+ gpram_cache[len++] = op->cmd.opcode;
+
+ /* Put address */
+ addr_sh = (op->addr.nbytes - 1) * 8;
+ while (addr_sh >= 0) {
+ gpram_cache[len++] = (op->addr.val >> addr_sh) & 0xff;
+ addr_sh -= 8;
+ }
+
+ /* Put dummy bytes */
+ for (i = 0; i < op->dummy.nbytes; i++)
+ gpram_cache[len++] = 0;
+
+ /* Put output data */
+ if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT) {
+ memcpy(gpram_cache + len, op->data.buf.out, op->data.nbytes);
+ len += op->data.nbytes;
+ }
+
+ /* Copy final output data to GPRAM */
+ mtk_snfi_copy_to_gpram(priv, gpram_cache, len);
+
+ /* Start one SPI transaction */
+ if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_IN)
+ inlen = op->data.nbytes;
+
+ ret = mtk_snfi_mac_trigger(priv, bus, len, inlen);
+ if (ret)
+ return ret;
+
+ /* Copy input data from GPRAM */
+ if (inlen)
+ mtk_snfi_copy_from_gpram(priv, gpram_cache, op->data.buf.in,
+ len, inlen);
+
+ return 0;
+}
+
+static int mtk_snfi_spi_probe(struct udevice *bus)
+{
+ struct mtk_snfi_priv *priv = dev_get_priv(bus);
+ int ret;
+
+ priv->base = (void __iomem *)devfdt_get_addr(bus);
+ if (!priv->base)
+ return -EINVAL;
+
+ ret = clk_get_by_name(bus, "nfi_clk", &priv->nfi_clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_get_by_name(bus, "pad_clk", &priv->pad_clk);
+ if (ret < 0)
+ return ret;
+
+ clk_enable(&priv->nfi_clk);
+ clk_enable(&priv->pad_clk);
+
+ return 0;
+}
+
+static int mtk_snfi_set_speed(struct udevice *bus, uint speed)
+{
+ /*
+ * The SNFI does not have a bus clock divider.
+ * The bus clock is set in dts (pad_clk, UNIVPLL2_D8 = 50MHz).
+ */
+
+ return 0;
+}
+
+static int mtk_snfi_set_mode(struct udevice *bus, uint mode)
+{
+ /* The SNFI supports only mode 0 */
+
+ if (mode)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct spi_controller_mem_ops mtk_snfi_mem_ops = {
+ .adjust_op_size = mtk_snfi_adjust_op_size,
+ .supports_op = mtk_snfi_supports_op,
+ .exec_op = mtk_snfi_exec_op,
+};
+
+static const struct dm_spi_ops mtk_snfi_spi_ops = {
+ .mem_ops = &mtk_snfi_mem_ops,
+ .set_speed = mtk_snfi_set_speed,
+ .set_mode = mtk_snfi_set_mode,
+};
+
+static const struct udevice_id mtk_snfi_spi_ids[] = {
+ { .compatible = "mediatek,mtk-snfi-spi" },
+ { }
+};
+
+U_BOOT_DRIVER(mtk_snfi_spi) = {
+ .name = "mtk_snfi_spi",
+ .id = UCLASS_SPI,
+ .of_match = mtk_snfi_spi_ids,
+ .ops = &mtk_snfi_spi_ops,
+ .priv_auto_alloc_size = sizeof(struct mtk_snfi_priv),
+ .probe = mtk_snfi_spi_probe,
+};
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
index 5065e407f8..3a9756fbf1 100644
--- a/drivers/spi/mxs_spi.c
+++ b/drivers/spi/mxs_spi.c
@@ -2,6 +2,9 @@
/*
* Freescale i.MX28 SPI driver
*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
@@ -27,6 +30,19 @@
#define MXSSSP_SMALL_TRANSFER 512
+static void mxs_spi_start_xfer(struct mxs_ssp_regs *ssp_regs)
+{
+ writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
+ writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
+}
+
+static void mxs_spi_end_xfer(struct mxs_ssp_regs *ssp_regs)
+{
+ writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
+ writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
+}
+
+#if !CONFIG_IS_ENABLED(DM_SPI)
struct mxs_spi_slave {
struct spi_slave slave;
uint32_t max_khz;
@@ -38,94 +54,38 @@ static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave)
{
return container_of(slave, struct mxs_spi_slave, slave);
}
+#else
+#include <dm.h>
+#include <errno.h>
+struct mxs_spi_platdata {
+ s32 frequency; /* Default clock frequency, -1 for none */
+ fdt_addr_t base; /* SPI IP block base address */
+ int num_cs; /* Number of CSes supported */
+ int dma_id; /* ID of the DMA channel */
+ int clk_id; /* ID of the SSP clock */
+};
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- /* MXS SPI: 4 ports and 3 chip selects maximum */
- if (!mxs_ssp_bus_id_valid(bus) || cs > 2)
- return 0;
- else
- return 1;
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct mxs_spi_slave *mxs_slave;
-
- if (!spi_cs_is_valid(bus, cs)) {
- printf("mxs_spi: invalid bus %d / chip select %d\n", bus, cs);
- return NULL;
- }
-
- mxs_slave = spi_alloc_slave(struct mxs_spi_slave, bus, cs);
- if (!mxs_slave)
- return NULL;
-
- if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus))
- goto err_init;
-
- mxs_slave->max_khz = max_hz / 1000;
- mxs_slave->mode = mode;
- mxs_slave->regs = mxs_ssp_regs_by_bus(bus);
-
- return &mxs_slave->slave;
-
-err_init:
- free(mxs_slave);
- return NULL;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
- free(mxs_slave);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
- struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
- uint32_t reg = 0;
-
- mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
-
- writel((slave->cs << MXS_SSP_CHIPSELECT_SHIFT) |
- SSP_CTRL0_BUS_WIDTH_ONE_BIT,
- &ssp_regs->hw_ssp_ctrl0);
-
- reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
- reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
- reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
- writel(reg, &ssp_regs->hw_ssp_ctrl1);
-
- writel(0, &ssp_regs->hw_ssp_cmd0);
-
- mxs_set_ssp_busclock(slave->bus, mxs_slave->max_khz);
-
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-}
-
-static void mxs_spi_start_xfer(struct mxs_ssp_regs *ssp_regs)
-{
- writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
- writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
-}
-
-static void mxs_spi_end_xfer(struct mxs_ssp_regs *ssp_regs)
-{
- writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
- writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
-}
+struct mxs_spi_priv {
+ struct mxs_ssp_regs *regs;
+ unsigned int dma_channel;
+ unsigned int max_freq;
+ unsigned int clk_id;
+ unsigned int mode;
+};
+#endif
+#if !CONFIG_IS_ENABLED(DM_SPI)
static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
char *data, int length, int write, unsigned long flags)
{
struct mxs_ssp_regs *ssp_regs = slave->regs;
+#else
+static int mxs_spi_xfer_pio(struct mxs_spi_priv *priv,
+ char *data, int length, int write,
+ unsigned long flags)
+{
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+#endif
if (flags & SPI_XFER_BEGIN)
mxs_spi_start_xfer(ssp_regs);
@@ -181,12 +141,19 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave,
return 0;
}
+#if !CONFIG_IS_ENABLED(DM_SPI)
static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
char *data, int length, int write, unsigned long flags)
{
+ struct mxs_ssp_regs *ssp_regs = slave->regs;
+#else
+static int mxs_spi_xfer_dma(struct mxs_spi_priv *priv,
+ char *data, int length, int write,
+ unsigned long flags)
+{ struct mxs_ssp_regs *ssp_regs = priv->regs;
+#endif
const int xfer_max_sz = 0xff00;
const int desc_count = DIV_ROUND_UP(length, xfer_max_sz) + 1;
- struct mxs_ssp_regs *ssp_regs = slave->regs;
struct mxs_dma_desc *dp;
uint32_t ctrl0;
uint32_t cache_data_count;
@@ -225,7 +192,11 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
/* Invalidate the area, so no writeback into the RAM races with DMA */
invalidate_dcache_range(dstart, dstart + cache_data_count);
+#if !CONFIG_IS_ENABLED(DM_SPI)
dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + slave->slave.bus;
+#else
+ dmach = priv->dma_channel;
+#endif
dp = desc;
while (length) {
@@ -302,11 +273,20 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave,
return ret;
}
+#if !CONFIG_IS_ENABLED(DM_SPI)
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
+#else
+int mxs_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct mxs_spi_priv *priv = dev_get_priv(bus);
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+#endif
int len = bitlen / 8;
char dummy;
int write = 0;
@@ -350,9 +330,263 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
if (!dma || (len < MXSSSP_SMALL_TRANSFER)) {
writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr);
+#if !CONFIG_IS_ENABLED(DM_SPI)
return mxs_spi_xfer_pio(mxs_slave, data, len, write, flags);
+#else
+ return mxs_spi_xfer_pio(priv, data, len, write, flags);
+#endif
} else {
writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set);
+#if !CONFIG_IS_ENABLED(DM_SPI)
return mxs_spi_xfer_dma(mxs_slave, data, len, write, flags);
+#else
+ return mxs_spi_xfer_dma(priv, data, len, write, flags);
+#endif
}
}
+
+#if !CONFIG_IS_ENABLED(DM_SPI)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ /* MXS SPI: 4 ports and 3 chip selects maximum */
+ if (!mxs_ssp_bus_id_valid(bus) || cs > 2)
+ return 0;
+ else
+ return 1;
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct mxs_spi_slave *mxs_slave;
+
+ if (!spi_cs_is_valid(bus, cs)) {
+ printf("mxs_spi: invalid bus %d / chip select %d\n", bus, cs);
+ return NULL;
+ }
+
+ mxs_slave = spi_alloc_slave(struct mxs_spi_slave, bus, cs);
+ if (!mxs_slave)
+ return NULL;
+
+ if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus))
+ goto err_init;
+
+ mxs_slave->max_khz = max_hz / 1000;
+ mxs_slave->mode = mode;
+ mxs_slave->regs = mxs_ssp_regs_by_bus(bus);
+
+ return &mxs_slave->slave;
+
+err_init:
+ free(mxs_slave);
+ return NULL;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
+
+ free(mxs_slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
+ struct mxs_ssp_regs *ssp_regs = mxs_slave->regs;
+ u32 reg = 0;
+
+ mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
+
+ writel((slave->cs << MXS_SSP_CHIPSELECT_SHIFT) |
+ SSP_CTRL0_BUS_WIDTH_ONE_BIT,
+ &ssp_regs->hw_ssp_ctrl0);
+
+ reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
+ reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
+ reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
+ writel(reg, &ssp_regs->hw_ssp_ctrl1);
+
+ writel(0, &ssp_regs->hw_ssp_cmd0);
+
+ mxs_set_ssp_busclock(slave->bus, mxs_slave->max_khz);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+#else /* CONFIG_DM_SPI */
+/* Base numbers of i.MX2[38] clk for ssp0 IP block */
+#define MXS_SSP_IMX23_CLKID_SSP0 33
+#define MXS_SSP_IMX28_CLKID_SSP0 46
+
+static int mxs_spi_probe(struct udevice *bus)
+{
+ struct mxs_spi_platdata *plat = dev_get_platdata(bus);
+ struct mxs_spi_priv *priv = dev_get_priv(bus);
+ int ret;
+
+ debug("%s: probe\n", __func__);
+ priv->regs = (struct mxs_ssp_regs *)plat->base;
+ priv->max_freq = plat->frequency;
+
+ priv->dma_channel = plat->dma_id;
+ priv->clk_id = plat->clk_id;
+
+ ret = mxs_dma_init_channel(priv->dma_channel);
+ if (ret) {
+ printf("%s: DMA init channel error %d\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mxs_spi_claim_bus(struct udevice *dev)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct mxs_spi_priv *priv = dev_get_priv(bus);
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+ int cs = spi_chip_select(dev);
+
+ /*
+ * i.MX28 supports up to 3 CS (SSn0, SSn1, SSn2)
+ * To set them it uses following tuple (WAIT_FOR_IRQ,WAIT_FOR_CMD),
+ * where:
+ *
+ * WAIT_FOR_IRQ is bit 21 of HW_SSP_CTRL0
+ * WAIT_FOR_CMD is bit 20 (#defined as MXS_SSP_CHIPSELECT_SHIFT here) of
+ * HW_SSP_CTRL0
+ * SSn0 b00
+ * SSn1 b01
+ * SSn2 b10 (which require setting WAIT_FOR_IRQ)
+ *
+ * However, for now i.MX28 SPI driver will support up till 2 CSes
+ * (SSn0, and SSn1).
+ */
+
+ /* Ungate SSP clock and set active CS */
+ clrsetbits_le32(&ssp_regs->hw_ssp_ctrl0,
+ BIT(MXS_SSP_CHIPSELECT_SHIFT) |
+ SSP_CTRL0_CLKGATE, (cs << MXS_SSP_CHIPSELECT_SHIFT));
+
+ return 0;
+}
+
+static int mxs_spi_release_bus(struct udevice *dev)
+{
+ struct udevice *bus = dev_get_parent(dev);
+ struct mxs_spi_priv *priv = dev_get_priv(bus);
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+
+ /* Gate SSP clock */
+ setbits_le32(&ssp_regs->hw_ssp_ctrl0, SSP_CTRL0_CLKGATE);
+
+ return 0;
+}
+
+static int mxs_spi_set_speed(struct udevice *bus, uint speed)
+{
+ struct mxs_spi_priv *priv = dev_get_priv(bus);
+#ifdef CONFIG_MX28
+ int clkid = priv->clk_id - MXS_SSP_IMX28_CLKID_SSP0;
+#else /* CONFIG_MX23 */
+ int clkid = priv->clk_id - MXS_SSP_IMX23_CLKID_SSP0;
+#endif
+ if (speed > priv->max_freq)
+ speed = priv->max_freq;
+
+ debug("%s speed: %u [Hz] clkid: %d\n", __func__, speed, clkid);
+ mxs_set_ssp_busclock(clkid, speed / 1000);
+
+ return 0;
+}
+
+static int mxs_spi_set_mode(struct udevice *bus, uint mode)
+{
+ struct mxs_spi_priv *priv = dev_get_priv(bus);
+ struct mxs_ssp_regs *ssp_regs = priv->regs;
+ u32 reg;
+
+ priv->mode = mode;
+ debug("%s: mode 0x%x\n", __func__, mode);
+
+ reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
+ reg |= (priv->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
+ reg |= (priv->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
+ writel(reg, &ssp_regs->hw_ssp_ctrl1);
+
+ /* Single bit SPI support */
+ writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0);
+
+ return 0;
+}
+
+static const struct dm_spi_ops mxs_spi_ops = {
+ .claim_bus = mxs_spi_claim_bus,
+ .release_bus = mxs_spi_release_bus,
+ .xfer = mxs_spi_xfer,
+ .set_speed = mxs_spi_set_speed,
+ .set_mode = mxs_spi_set_mode,
+ /*
+ * cs_info is not needed, since we require all chip selects to be
+ * in the device tree explicitly
+ */
+};
+
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+static int mxs_ofdata_to_platdata(struct udevice *bus)
+{
+ struct mxs_spi_platdata *plat = bus->platdata;
+ u32 prop[2];
+ int ret;
+
+ plat->base = dev_read_addr(bus);
+ plat->frequency =
+ dev_read_u32_default(bus, "spi-max-frequency", 40000000);
+ plat->num_cs = dev_read_u32_default(bus, "num-cs", 2);
+
+ ret = dev_read_u32_array(bus, "dmas", prop, ARRAY_SIZE(prop));
+ if (ret) {
+ printf("%s: Reading 'dmas' property failed!\n", __func__);
+ return ret;
+ }
+ plat->dma_id = prop[1];
+
+ ret = dev_read_u32_array(bus, "clocks", prop, ARRAY_SIZE(prop));
+ if (ret) {
+ printf("%s: Reading 'clocks' property failed!\n", __func__);
+ return ret;
+ }
+ plat->clk_id = prop[1];
+
+ debug("%s: base=0x%x, max-frequency=%d num-cs=%d dma_id=%d clk_id=%d\n",
+ __func__, (uint)plat->base, plat->frequency, plat->num_cs,
+ plat->dma_id, plat->clk_id);
+
+ return 0;
+}
+#endif
+
+static const struct udevice_id mxs_spi_ids[] = {
+ { .compatible = "fsl,imx23-spi" },
+ { .compatible = "fsl,imx28-spi" },
+ { }
+};
+
+U_BOOT_DRIVER(mxs_spi) = {
+ .name = "mxs_spi",
+ .id = UCLASS_SPI,
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+ .of_match = mxs_spi_ids,
+ .ofdata_to_platdata = mxs_ofdata_to_platdata,
+#endif
+ .priv_auto_alloc_size = sizeof(struct mxs_spi_platdata),
+ .ops = &mxs_spi_ops,
+ .priv_auto_alloc_size = sizeof(struct mxs_spi_priv),
+ .probe = mxs_spi_probe,
+};
+#endif
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 7aabebeff5..7788ab9953 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -430,12 +430,14 @@ int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op)
if (slave->max_write_size && len > slave->max_write_size)
return -EINVAL;
- if (op->data.dir == SPI_MEM_DATA_IN && slave->max_read_size)
- op->data.nbytes = min(op->data.nbytes,
+ if (op->data.dir == SPI_MEM_DATA_IN) {
+ if (slave->max_read_size)
+ op->data.nbytes = min(op->data.nbytes,
slave->max_read_size);
- else if (slave->max_write_size)
+ } else if (slave->max_write_size) {
op->data.nbytes = min(op->data.nbytes,
slave->max_write_size - len);
+ }
if (!op->data.nbytes)
return -EINVAL;
diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
new file mode 100644
index 0000000000..969bd4b75c
--- /dev/null
+++ b/drivers/spi/spi-sifive.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 SiFive, Inc.
+ * Copyright 2019 Bhargav Shah <bhargavshah1988@gmail.com>
+ *
+ * SiFive SPI controller driver (master mode only)
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <linux/log2.h>
+#include <clk.h>
+
+#define SIFIVE_SPI_MAX_CS 32
+
+#define SIFIVE_SPI_DEFAULT_DEPTH 8
+#define SIFIVE_SPI_DEFAULT_BITS 8
+
+/* register offsets */
+#define SIFIVE_SPI_REG_SCKDIV 0x00 /* Serial clock divisor */
+#define SIFIVE_SPI_REG_SCKMODE 0x04 /* Serial clock mode */
+#define SIFIVE_SPI_REG_CSID 0x10 /* Chip select ID */
+#define SIFIVE_SPI_REG_CSDEF 0x14 /* Chip select default */
+#define SIFIVE_SPI_REG_CSMODE 0x18 /* Chip select mode */
+#define SIFIVE_SPI_REG_DELAY0 0x28 /* Delay control 0 */
+#define SIFIVE_SPI_REG_DELAY1 0x2c /* Delay control 1 */
+#define SIFIVE_SPI_REG_FMT 0x40 /* Frame format */
+#define SIFIVE_SPI_REG_TXDATA 0x48 /* Tx FIFO data */
+#define SIFIVE_SPI_REG_RXDATA 0x4c /* Rx FIFO data */
+#define SIFIVE_SPI_REG_TXMARK 0x50 /* Tx FIFO watermark */
+#define SIFIVE_SPI_REG_RXMARK 0x54 /* Rx FIFO watermark */
+#define SIFIVE_SPI_REG_FCTRL 0x60 /* SPI flash interface control */
+#define SIFIVE_SPI_REG_FFMT 0x64 /* SPI flash instruction format */
+#define SIFIVE_SPI_REG_IE 0x70 /* Interrupt Enable Register */
+#define SIFIVE_SPI_REG_IP 0x74 /* Interrupt Pendings Register */
+
+/* sckdiv bits */
+#define SIFIVE_SPI_SCKDIV_DIV_MASK 0xfffU
+
+/* sckmode bits */
+#define SIFIVE_SPI_SCKMODE_PHA BIT(0)
+#define SIFIVE_SPI_SCKMODE_POL BIT(1)
+#define SIFIVE_SPI_SCKMODE_MODE_MASK (SIFIVE_SPI_SCKMODE_PHA | \
+ SIFIVE_SPI_SCKMODE_POL)
+
+/* csmode bits */
+#define SIFIVE_SPI_CSMODE_MODE_AUTO 0U
+#define SIFIVE_SPI_CSMODE_MODE_HOLD 2U
+#define SIFIVE_SPI_CSMODE_MODE_OFF 3U
+
+/* delay0 bits */
+#define SIFIVE_SPI_DELAY0_CSSCK(x) ((u32)(x))
+#define SIFIVE_SPI_DELAY0_CSSCK_MASK 0xffU
+#define SIFIVE_SPI_DELAY0_SCKCS(x) ((u32)(x) << 16)
+#define SIFIVE_SPI_DELAY0_SCKCS_MASK (0xffU << 16)
+
+/* delay1 bits */
+#define SIFIVE_SPI_DELAY1_INTERCS(x) ((u32)(x))
+#define SIFIVE_SPI_DELAY1_INTERCS_MASK 0xffU
+#define SIFIVE_SPI_DELAY1_INTERXFR(x) ((u32)(x) << 16)
+#define SIFIVE_SPI_DELAY1_INTERXFR_MASK (0xffU << 16)
+
+/* fmt bits */
+#define SIFIVE_SPI_FMT_PROTO_SINGLE 0U
+#define SIFIVE_SPI_FMT_PROTO_DUAL 1U
+#define SIFIVE_SPI_FMT_PROTO_QUAD 2U
+#define SIFIVE_SPI_FMT_PROTO_MASK 3U
+#define SIFIVE_SPI_FMT_ENDIAN BIT(2)
+#define SIFIVE_SPI_FMT_DIR BIT(3)
+#define SIFIVE_SPI_FMT_LEN(x) ((u32)(x) << 16)
+#define SIFIVE_SPI_FMT_LEN_MASK (0xfU << 16)
+
+/* txdata bits */
+#define SIFIVE_SPI_TXDATA_DATA_MASK 0xffU
+#define SIFIVE_SPI_TXDATA_FULL BIT(31)
+
+/* rxdata bits */
+#define SIFIVE_SPI_RXDATA_DATA_MASK 0xffU
+#define SIFIVE_SPI_RXDATA_EMPTY BIT(31)
+
+/* ie and ip bits */
+#define SIFIVE_SPI_IP_TXWM BIT(0)
+#define SIFIVE_SPI_IP_RXWM BIT(1)
+
+struct sifive_spi {
+ void *regs; /* base address of the registers */
+ u32 fifo_depth;
+ u32 bits_per_word;
+ u32 cs_inactive; /* Level of the CS pins when inactive*/
+ u32 freq;
+ u32 num_cs;
+};
+
+static void sifive_spi_prep_device(struct sifive_spi *spi,
+ struct dm_spi_slave_platdata *slave)
+{
+ /* Update the chip select polarity */
+ if (slave->mode & SPI_CS_HIGH)
+ spi->cs_inactive &= ~BIT(slave->cs);
+ else
+ spi->cs_inactive |= BIT(slave->cs);
+ writel(spi->cs_inactive, spi->regs + SIFIVE_SPI_REG_CSDEF);
+
+ /* Select the correct device */
+ writel(slave->cs, spi->regs + SIFIVE_SPI_REG_CSID);
+}
+
+static int sifive_spi_set_cs(struct sifive_spi *spi,
+ struct dm_spi_slave_platdata *slave)
+{
+ u32 cs_mode = SIFIVE_SPI_CSMODE_MODE_HOLD;
+
+ if (slave->mode & SPI_CS_HIGH)
+ cs_mode = SIFIVE_SPI_CSMODE_MODE_AUTO;
+
+ writel(cs_mode, spi->regs + SIFIVE_SPI_REG_CSMODE);
+
+ return 0;
+}
+
+static void sifive_spi_clear_cs(struct sifive_spi *spi)
+{
+ writel(SIFIVE_SPI_CSMODE_MODE_AUTO, spi->regs + SIFIVE_SPI_REG_CSMODE);
+}
+
+static void sifive_spi_prep_transfer(struct sifive_spi *spi,
+ bool is_rx_xfer,
+ struct dm_spi_slave_platdata *slave)
+{
+ u32 cr;
+
+ /* Modify the SPI protocol mode */
+ cr = readl(spi->regs + SIFIVE_SPI_REG_FMT);
+
+ /* Bits per word ? */
+ cr &= ~SIFIVE_SPI_FMT_LEN_MASK;
+ cr |= SIFIVE_SPI_FMT_LEN(spi->bits_per_word);
+
+ /* LSB first? */
+ cr &= ~SIFIVE_SPI_FMT_ENDIAN;
+ if (slave->mode & SPI_LSB_FIRST)
+ cr |= SIFIVE_SPI_FMT_ENDIAN;
+
+ /* Number of wires ? */
+ cr &= ~SIFIVE_SPI_FMT_PROTO_MASK;
+ if ((slave->mode & SPI_TX_QUAD) || (slave->mode & SPI_RX_QUAD))
+ cr |= SIFIVE_SPI_FMT_PROTO_QUAD;
+ else if ((slave->mode & SPI_TX_DUAL) || (slave->mode & SPI_RX_DUAL))
+ cr |= SIFIVE_SPI_FMT_PROTO_DUAL;
+ else
+ cr |= SIFIVE_SPI_FMT_PROTO_SINGLE;
+
+ /* SPI direction in/out ? */
+ cr &= ~SIFIVE_SPI_FMT_DIR;
+ if (!is_rx_xfer)
+ cr |= SIFIVE_SPI_FMT_DIR;
+
+ writel(cr, spi->regs + SIFIVE_SPI_REG_FMT);
+}
+
+static void sifive_spi_rx(struct sifive_spi *spi, u8 *rx_ptr)
+{
+ u32 data;
+
+ do {
+ data = readl(spi->regs + SIFIVE_SPI_REG_RXDATA);
+ } while (data & SIFIVE_SPI_RXDATA_EMPTY);
+
+ if (rx_ptr)
+ *rx_ptr = data & SIFIVE_SPI_RXDATA_DATA_MASK;
+}
+
+static void sifive_spi_tx(struct sifive_spi *spi, const u8 *tx_ptr)
+{
+ u32 data;
+ u8 tx_data = (tx_ptr) ? *tx_ptr & SIFIVE_SPI_TXDATA_DATA_MASK :
+ SIFIVE_SPI_TXDATA_DATA_MASK;
+
+ do {
+ data = readl(spi->regs + SIFIVE_SPI_REG_TXDATA);
+ } while (data & SIFIVE_SPI_TXDATA_FULL);
+
+ writel(tx_data, spi->regs + SIFIVE_SPI_REG_TXDATA);
+}
+
+static int sifive_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct udevice *bus = dev->parent;
+ struct sifive_spi *spi = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
+ const unsigned char *tx_ptr = dout;
+ u8 *rx_ptr = din;
+ u32 remaining_len;
+ int ret;
+
+ if (flags & SPI_XFER_BEGIN) {
+ sifive_spi_prep_device(spi, slave);
+
+ ret = sifive_spi_set_cs(spi, slave);
+ if (ret)
+ return ret;
+ }
+
+ sifive_spi_prep_transfer(spi, true, slave);
+
+ remaining_len = bitlen / 8;
+
+ while (remaining_len) {
+ int n_words, tx_words, rx_words;
+
+ n_words = min(remaining_len, spi->fifo_depth);
+
+ /* Enqueue n_words for transmission */
+ if (tx_ptr) {
+ for (tx_words = 0; tx_words < n_words; ++tx_words) {
+ sifive_spi_tx(spi, tx_ptr);
+ sifive_spi_rx(spi, NULL);
+ tx_ptr++;
+ }
+ }
+
+ /* Read out all the data from the RX FIFO */
+ if (rx_ptr) {
+ for (rx_words = 0; rx_words < n_words; ++rx_words) {
+ sifive_spi_tx(spi, NULL);
+ sifive_spi_rx(spi, rx_ptr);
+ rx_ptr++;
+ }
+ }
+
+ remaining_len -= n_words;
+ }
+
+ if (flags & SPI_XFER_END)
+ sifive_spi_clear_cs(spi);
+
+ return 0;
+}
+
+static int sifive_spi_set_speed(struct udevice *bus, uint speed)
+{
+ struct sifive_spi *spi = dev_get_priv(bus);
+ u32 scale;
+
+ if (speed > spi->freq)
+ speed = spi->freq;
+
+ /* Cofigure max speed */
+ scale = (DIV_ROUND_UP(spi->freq >> 1, speed) - 1)
+ & SIFIVE_SPI_SCKDIV_DIV_MASK;
+ writel(scale, spi->regs + SIFIVE_SPI_REG_SCKDIV);
+
+ return 0;
+}
+
+static int sifive_spi_set_mode(struct udevice *bus, uint mode)
+{
+ struct sifive_spi *spi = dev_get_priv(bus);
+ u32 cr;
+
+ /* Switch clock mode bits */
+ cr = readl(spi->regs + SIFIVE_SPI_REG_SCKMODE) &
+ ~SIFIVE_SPI_SCKMODE_MODE_MASK;
+ if (mode & SPI_CPHA)
+ cr |= SIFIVE_SPI_SCKMODE_PHA;
+ if (mode & SPI_CPOL)
+ cr |= SIFIVE_SPI_SCKMODE_POL;
+
+ writel(cr, spi->regs + SIFIVE_SPI_REG_SCKMODE);
+
+ return 0;
+}
+
+static int sifive_spi_cs_info(struct udevice *bus, uint cs,
+ struct spi_cs_info *info)
+{
+ struct sifive_spi *spi = dev_get_priv(bus);
+
+ if (cs >= spi->num_cs)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void sifive_spi_init_hw(struct sifive_spi *spi)
+{
+ u32 cs_bits;
+
+ /* probe the number of CS lines */
+ spi->cs_inactive = readl(spi->regs + SIFIVE_SPI_REG_CSDEF);
+ writel(0xffffffffU, spi->regs + SIFIVE_SPI_REG_CSDEF);
+ cs_bits = readl(spi->regs + SIFIVE_SPI_REG_CSDEF);
+ writel(spi->cs_inactive, spi->regs + SIFIVE_SPI_REG_CSDEF);
+ if (!cs_bits) {
+ printf("Could not auto probe CS lines\n");
+ return;
+ }
+
+ spi->num_cs = ilog2(cs_bits) + 1;
+ if (spi->num_cs > SIFIVE_SPI_MAX_CS) {
+ printf("Invalid number of spi slaves\n");
+ return;
+ }
+
+ /* Watermark interrupts are disabled by default */
+ writel(0, spi->regs + SIFIVE_SPI_REG_IE);
+
+ /* Set CS/SCK Delays and Inactive Time to defaults */
+ writel(SIFIVE_SPI_DELAY0_CSSCK(1) | SIFIVE_SPI_DELAY0_SCKCS(1),
+ spi->regs + SIFIVE_SPI_REG_DELAY0);
+ writel(SIFIVE_SPI_DELAY1_INTERCS(1) | SIFIVE_SPI_DELAY1_INTERXFR(0),
+ spi->regs + SIFIVE_SPI_REG_DELAY1);
+
+ /* Exit specialized memory-mapped SPI flash mode */
+ writel(0, spi->regs + SIFIVE_SPI_REG_FCTRL);
+}
+
+static int sifive_spi_probe(struct udevice *bus)
+{
+ struct sifive_spi *spi = dev_get_priv(bus);
+ struct clk clkdev;
+ int ret;
+
+ spi->regs = (void *)(ulong)dev_remap_addr(bus);
+ if (!spi->regs)
+ return -ENODEV;
+
+ spi->fifo_depth = dev_read_u32_default(bus,
+ "sifive,fifo-depth",
+ SIFIVE_SPI_DEFAULT_DEPTH);
+
+ spi->bits_per_word = dev_read_u32_default(bus,
+ "sifive,max-bits-per-word",
+ SIFIVE_SPI_DEFAULT_BITS);
+
+ ret = clk_get_by_index(bus, 0, &clkdev);
+ if (ret)
+ return ret;
+ spi->freq = clk_get_rate(&clkdev);
+
+ /* init the sifive spi hw */
+ sifive_spi_init_hw(spi);
+
+ return 0;
+}
+
+static const struct dm_spi_ops sifive_spi_ops = {
+ .xfer = sifive_spi_xfer,
+ .set_speed = sifive_spi_set_speed,
+ .set_mode = sifive_spi_set_mode,
+ .cs_info = sifive_spi_cs_info,
+};
+
+static const struct udevice_id sifive_spi_ids[] = {
+ { .compatible = "sifive,spi0" },
+ { }
+};
+
+U_BOOT_DRIVER(sifive_spi) = {
+ .name = "sifive_spi",
+ .id = UCLASS_SPI,
+ .of_match = sifive_spi_ids,
+ .ops = &sifive_spi_ops,
+ .priv_auto_alloc_size = sizeof(struct sifive_spi),
+ .probe = sifive_spi_probe,
+};
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index a71b9be5fb..bdf8dc6fef 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -17,6 +17,15 @@ config IMX_THERMAL
cpufreq is used as the cooling device to throttle CPUs when the
passive trip is crossed.
+config IMX_SCU_THERMAL
+ bool "Temperature sensor driver for NXP i.MX8"
+ depends on ARCH_IMX8
+ help
+ Support for Temperature sensors on NXP i.MX8.
+ It supports one critical trip point and one passive trip point. The
+ boot is hold to the cool device to throttle CPUs when the passive
+ trip is crossed
+
config TI_DRA7_THERMAL
bool "Temperature sensor driver for TI dra7xx SOCs"
help
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index cc75e387e4..ef2929d180 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -5,4 +5,5 @@
obj-$(CONFIG_DM_THERMAL) += thermal-uclass.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
+obj-$(CONFIG_IMX_SCU_THERMAL) += imx_scu_thermal.o
obj-$(CONFIG_TI_DRA7_THERMAL) += ti-bandgap.o
diff --git a/drivers/thermal/imx_scu_thermal.c b/drivers/thermal/imx_scu_thermal.c
new file mode 100644
index 0000000000..7e17377b69
--- /dev/null
+++ b/drivers/thermal/imx_scu_thermal.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <config.h>
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <thermal.h>
+#include <dm/device-internal.h>
+#include <dm/device.h>
+#include <asm/arch/sci/sci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct imx_sc_thermal_plat {
+ int critical;
+ int alert;
+ int polling_delay;
+ int id;
+ bool zone_node;
+};
+
+static int read_temperature(struct udevice *dev, int *temp)
+{
+ s16 celsius;
+ s8 tenths;
+ int ret;
+
+ sc_rsrc_t *sensor_rsrc = (sc_rsrc_t *)dev_get_driver_data(dev);
+
+ struct imx_sc_thermal_plat *pdata = dev_get_platdata(dev);
+
+ if (!temp)
+ return -EINVAL;
+
+ ret = sc_misc_get_temp(-1, sensor_rsrc[pdata->id], SC_C_TEMP,
+ &celsius, &tenths);
+ if (ret) {
+ printf("Error: get temperature failed! (error = %d)\n", ret);
+ return ret;
+ }
+
+ *temp = celsius * 1000 + tenths * 100;
+
+ return 0;
+}
+
+int imx_sc_thermal_get_temp(struct udevice *dev, int *temp)
+{
+ struct imx_sc_thermal_plat *pdata = dev_get_platdata(dev);
+ int cpu_temp = 0;
+ int ret;
+
+ ret = read_temperature(dev, &cpu_temp);
+ if (ret)
+ return ret;
+
+ while (cpu_temp >= pdata->alert) {
+ printf("CPU Temperature (%dC) has beyond alert (%dC), close to critical (%dC)",
+ cpu_temp, pdata->alert, pdata->critical);
+ puts(" waiting...\n");
+ mdelay(pdata->polling_delay);
+ ret = read_temperature(dev, &cpu_temp);
+ if (ret)
+ return ret;
+ }
+
+ *temp = cpu_temp / 1000;
+
+ return 0;
+}
+
+static const struct dm_thermal_ops imx_sc_thermal_ops = {
+ .get_temp = imx_sc_thermal_get_temp,
+};
+
+static int imx_sc_thermal_probe(struct udevice *dev)
+{
+ debug("%s dev name %s\n", __func__, dev->name);
+ return 0;
+}
+
+static int imx_sc_thermal_bind(struct udevice *dev)
+{
+ struct imx_sc_thermal_plat *pdata = dev_get_platdata(dev);
+ int reg, ret;
+ int offset;
+ const char *name;
+ const void *prop;
+
+ debug("%s dev name %s\n", __func__, dev->name);
+
+ prop = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "compatible",
+ NULL);
+ if (!prop)
+ return 0;
+
+ pdata->zone_node = 1;
+
+ reg = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "tsens-num", 0);
+ if (reg == 0) {
+ printf("%s: no temp sensor number provided!\n", __func__);
+ return -EINVAL;
+ }
+
+ offset = fdt_subnode_offset(gd->fdt_blob, 0, "thermal-zones");
+ fdt_for_each_subnode(offset, gd->fdt_blob, offset) {
+ /* Bind the subnode to this driver */
+ name = fdt_get_name(gd->fdt_blob, offset, NULL);
+
+ ret = device_bind_with_driver_data(dev, dev->driver, name,
+ dev->driver_data,
+ offset_to_ofnode(offset),
+ NULL);
+ if (ret)
+ printf("Error binding driver '%s': %d\n",
+ dev->driver->name, ret);
+ }
+ return 0;
+}
+
+static int imx_sc_thermal_ofdata_to_platdata(struct udevice *dev)
+{
+ struct imx_sc_thermal_plat *pdata = dev_get_platdata(dev);
+ struct fdtdec_phandle_args args;
+ const char *type;
+ int ret;
+ int trips_np;
+
+ debug("%s dev name %s\n", __func__, dev->name);
+
+ if (pdata->zone_node)
+ return 0;
+
+ ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev_of_offset(dev),
+ "thermal-sensors",
+ "#thermal-sensor-cells",
+ 0, 0, &args);
+ if (ret)
+ return ret;
+
+ if (args.node != dev_of_offset(dev->parent))
+ return -EFAULT;
+
+ if (args.args_count >= 1)
+ pdata->id = args.args[0];
+ else
+ pdata->id = 0;
+
+ debug("args.args_count %d, id %d\n", args.args_count, pdata->id);
+
+ pdata->polling_delay = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
+ "polling-delay", 1000);
+
+ trips_np = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(dev),
+ "trips");
+ fdt_for_each_subnode(trips_np, gd->fdt_blob, trips_np) {
+ type = fdt_getprop(gd->fdt_blob, trips_np, "type", NULL);
+ if (type) {
+ if (strcmp(type, "critical") == 0) {
+ pdata->critical = fdtdec_get_int(gd->fdt_blob,
+ trips_np,
+ "temperature",
+ 85);
+ } else if (strcmp(type, "passive") == 0) {
+ pdata->alert = fdtdec_get_int(gd->fdt_blob,
+ trips_np,
+ "temperature",
+ 80);
+ }
+ }
+ }
+
+ debug("id %d polling_delay %d, critical %d, alert %d\n", pdata->id,
+ pdata->polling_delay, pdata->critical, pdata->alert);
+
+ return 0;
+}
+
+static const sc_rsrc_t imx8qxp_sensor_rsrc[] = {
+ SC_R_SYSTEM, SC_R_DRC_0, SC_R_PMIC_0,
+ SC_R_PMIC_1, SC_R_PMIC_2,
+};
+
+static const struct udevice_id imx_sc_thermal_ids[] = {
+ { .compatible = "nxp,imx8qxp-sc-tsens", .data =
+ (ulong)&imx8qxp_sensor_rsrc, },
+ { }
+};
+
+U_BOOT_DRIVER(imx_sc_thermal) = {
+ .name = "imx_sc_thermal",
+ .id = UCLASS_THERMAL,
+ .ops = &imx_sc_thermal_ops,
+ .of_match = imx_sc_thermal_ids,
+ .bind = imx_sc_thermal_bind,
+ .probe = imx_sc_thermal_probe,
+ .ofdata_to_platdata = imx_sc_thermal_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct imx_sc_thermal_plat),
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ee0ddffe73..ccda432f49 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -28,7 +28,7 @@ config BCM2835_WDT
config IMX_WATCHDOG
bool "Enable Watchdog Timer support for IMX and LSCH2 of NXP"
- select HW_WATCHDOG
+ select HW_WATCHDOG if !WDT
help
Select this to enable the IMX and LSCH2 of Layerscape watchdog
driver.
@@ -169,4 +169,11 @@ config WDT_TANGIER
Intel Tangier SoC. If you're using a board with Intel Tangier
SoC, say Y here.
+config SPL_WDT
+ bool "Enable driver model for watchdog timer drivers in SPL"
+ depends on SPL_DM
+ help
+ Enable driver model for watchdog timer in SPL.
+ This is similar to CONFIG_WDT in U-Boot.
+
endmenu
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 68c989aa0b..97aa6a836c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o
-obj-$(CONFIG_WDT) += wdt-uclass.o
+obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o
obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
diff --git a/drivers/watchdog/imx_watchdog.c b/drivers/watchdog/imx_watchdog.c
index 14cc618074..53a3e9f5c7 100644
--- a/drivers/watchdog/imx_watchdog.c
+++ b/drivers/watchdog/imx_watchdog.c
@@ -5,7 +5,9 @@
*/
#include <common.h>
+#include <dm.h>
#include <asm/io.h>
+#include <wdt.h>
#include <watchdog.h>
#include <asm/arch/imx-regs.h>
#ifdef CONFIG_FSL_LSCH2
@@ -13,20 +15,40 @@
#endif
#include <fsl_wdog.h>
-#ifdef CONFIG_IMX_WATCHDOG
-void hw_watchdog_reset(void)
+static void imx_watchdog_expire_now(struct watchdog_regs *wdog)
+{
+ clrsetbits_le16(&wdog->wcr, WCR_WT_MSK, WCR_WDE);
+
+ writew(0x5555, &wdog->wsr);
+ writew(0xaaaa, &wdog->wsr); /* load minimum 1/2 second timeout */
+ while (1) {
+ /*
+ * spin for .5 seconds before reset
+ */
+ }
+}
+
+#if !defined(CONFIG_IMX_WATCHDOG) || \
+ (defined(CONFIG_IMX_WATCHDOG) && !CONFIG_IS_ENABLED(WDT))
+void __attribute__((weak)) reset_cpu(ulong addr)
{
-#ifndef CONFIG_WATCHDOG_RESET_DISABLE
struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+ imx_watchdog_expire_now(wdog);
+}
+#endif
+
+#if defined(CONFIG_IMX_WATCHDOG)
+static void imx_watchdog_reset(struct watchdog_regs *wdog)
+{
+#ifndef CONFIG_WATCHDOG_RESET_DISABLE
writew(0x5555, &wdog->wsr);
writew(0xaaaa, &wdog->wsr);
#endif /* CONFIG_WATCHDOG_RESET_DISABLE*/
}
-void hw_watchdog_init(void)
+static void imx_watchdog_init(struct watchdog_regs *wdog)
{
- struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
u16 timeout;
/*
@@ -44,21 +66,86 @@ void hw_watchdog_init(void)
writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT | WCR_SRS |
WCR_WDA | SET_WCR_WT(timeout), &wdog->wcr);
#endif /* CONFIG_FSL_LSCH2*/
- hw_watchdog_reset();
+ imx_watchdog_reset(wdog);
}
-#endif
-void __attribute__((weak)) reset_cpu(ulong addr)
+#if !CONFIG_IS_ENABLED(WDT)
+void hw_watchdog_reset(void)
{
struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
- clrsetbits_le16(&wdog->wcr, WCR_WT_MSK, WCR_WDE);
+ imx_watchdog_reset(wdog);
+}
- writew(0x5555, &wdog->wsr);
- writew(0xaaaa, &wdog->wsr); /* load minimum 1/2 second timeout */
- while (1) {
- /*
- * spin for .5 seconds before reset
- */
- }
+void hw_watchdog_init(void)
+{
+ struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+
+ imx_watchdog_init(wdog);
+}
+#else
+struct imx_wdt_priv {
+ void __iomem *base;
+};
+
+static int imx_wdt_reset(struct udevice *dev)
+{
+ struct imx_wdt_priv *priv = dev_get_priv(dev);
+
+ imx_watchdog_reset(priv->base);
+
+ return 0;
+}
+
+static int imx_wdt_expire_now(struct udevice *dev, ulong flags)
+{
+ struct imx_wdt_priv *priv = dev_get_priv(dev);
+
+ imx_watchdog_expire_now(priv->base);
+ hang();
+
+ return 0;
+}
+
+static int imx_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
+{
+ struct imx_wdt_priv *priv = dev_get_priv(dev);
+
+ imx_watchdog_init(priv->base);
+
+ return 0;
+}
+
+static int imx_wdt_probe(struct udevice *dev)
+{
+ struct imx_wdt_priv *priv = dev_get_priv(dev);
+
+ priv->base = dev_read_addr_ptr(dev);
+ if (!priv->base)
+ return -ENOENT;
+
+ return 0;
}
+
+static const struct wdt_ops imx_wdt_ops = {
+ .start = imx_wdt_start,
+ .reset = imx_wdt_reset,
+ .expire_now = imx_wdt_expire_now,
+};
+
+static const struct udevice_id imx_wdt_ids[] = {
+ { .compatible = "fsl,imx21-wdt" },
+ {}
+};
+
+U_BOOT_DRIVER(imx_wdt) = {
+ .name = "imx_wdt",
+ .id = UCLASS_WDT,
+ .of_match = imx_wdt_ids,
+ .probe = imx_wdt_probe,
+ .ops = &imx_wdt_ops,
+ .priv_auto_alloc_size = sizeof(struct imx_wdt_priv),
+ .flags = DM_FLAG_PRE_RELOC,
+};
+#endif
+#endif
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 02a3ed6838..7c2220643b 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -137,7 +137,7 @@ typedef struct global_data {
#if defined(CONFIG_TRANSLATION_OFFSET)
fdt_addr_t translation_offset; /* optional translation offset */
#endif
-#if defined(CONFIG_WDT)
+#if CONFIG_IS_ENABLED(WDT)
struct udevice *watchdog_dev;
#endif
} gd_t;
diff --git a/include/clk.h b/include/clk.h
index d24e99713a..f8f56d9cf0 100644
--- a/include/clk.h
+++ b/include/clk.h
@@ -20,7 +20,7 @@
* clock provider. This API provides a standard means for drivers to enable and
* disable clocks, and to set the rate at which they oscillate.
*
- * A driver that implements UCLASS_CLOCK is a clock provider. A provider will
+ * A driver that implements UCLASS_CLK is a clock provider. A provider will
* often implement multiple separate clocks, since the hardware it manages
* often has this capability. clk-uclass.h describes the interface which
* clock providers must implement.
@@ -40,6 +40,10 @@ struct udevice;
* other clock APIs to identify which clock signal to operate upon.
*
* @dev: The device which implements the clock signal.
+ * @rate: The clock rate (in HZ).
+ * @flags: Flags used across common clock structure (e.g. CLK_)
+ * Clock IP blocks specific flags (i.e. mux, div, gate, etc) are defined
+ * in struct's for those devices (e.g. struct clk_mux).
* @id: The clock signal ID within the provider.
* @data: An optional data field for scenarios where a single integer ID is not
* sufficient. If used, it can be populated through an .of_xlate op and
@@ -55,6 +59,8 @@ struct udevice;
*/
struct clk {
struct udevice *dev;
+ long long rate; /* in HZ */
+ u32 flags;
/*
* Written by of_xlate. In the future, we might add more fields here.
*/
@@ -253,6 +259,24 @@ int clk_free(struct clk *clk);
ulong clk_get_rate(struct clk *clk);
/**
+ * clk_get_parent() - Get current clock's parent.
+ *
+ * @clk: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @return pointer to parent's struct clk, or error code passed as pointer
+ */
+struct clk *clk_get_parent(struct clk *clk);
+
+/**
+ * clk_get_parent_rate() - Get parent of current clock rate.
+ *
+ * @clk: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @return clock rate in Hz, or -ve error code.
+ */
+long long clk_get_parent_rate(struct clk *clk);
+
+/**
* clk_set_rate() - Set current clock rate.
*
* @clk: A clock struct that was previously successfully requested by
@@ -321,4 +345,15 @@ static inline bool clk_valid(struct clk *clk)
{
return !!clk->dev;
}
+
+/**
+ * clk_get_by_id() - Get the clock by its ID
+ *
+ * @id: The clock ID to search for
+ *
+ * @clkp: A pointer to clock struct that has been found among added clocks
+ * to UCLASS_CLK
+ * @return zero on success, or -ENOENT on error
+ */
+int clk_get_by_id(ulong id, struct clk **clkp);
#endif
diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h
index 22d1e41bc8..a037349162 100644
--- a/include/configs/advantech_dms-ba16.h
+++ b/include/configs/advantech_dms-ba16.h
@@ -223,7 +223,6 @@
#define CONFIG_IMX_VIDEO_SKIP
#endif
-#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#ifdef CONFIG_CMD_PCI
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index db37fa7b73..974571df43 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -176,27 +176,6 @@
"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
"sdrootpart=2\0"
-
-#define USB_BOOTCMD \
- "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro,noatime " \
- "rootfstype=ext4 rootwait\0" \
- "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
- "setenv bootargs ${defargs} ${setupargs} " \
- "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
- "run usbdtbload; load usb " \
- "${usbdev}:${usbbootpart} ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} ${dtbparam}\0" \
- "usbbootpart=1\0" \
- "usbdev=0\0" \
- "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} "\
- "${fdt_addr_r} " \
- "${fdt_file} && setenv dtbparam \" - " \
- "${fdt_addr_r}\" && true\0" \
- "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
- "usbrootpart=2\0"
-
-
#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
#define FDT_FILE "imx6q-apalis-eval.dtb"
#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
@@ -219,7 +198,6 @@
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
SD_BOOTCMD \
- USB_BOOTCMD \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"flash_eth.img && source ${loadaddr}\0" \
diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h
index a24814673c..e998d9b1b2 100644
--- a/include/configs/aristainetos-common.h
+++ b/include/configs/aristainetos-common.h
@@ -196,7 +196,6 @@
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#endif /* __ARISTAINETOS_COMMON_CONFIG_H */
diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h
index 00e5667499..361e6ac654 100644
--- a/include/configs/aristainetos2.h
+++ b/include/configs/aristainetos2.h
@@ -45,9 +45,6 @@
#define CONFIG_LG4573_BUS 0
#define CONFIG_LG4573_CS 0
-#define CONFIG_PWM_IMX
-#define CONFIG_IMX6_PWM_PER_CLK 66000000
-
#include "aristainetos-common.h"
#endif /* __ARISTAINETOS2_CONFIG_H */
diff --git a/include/configs/aristainetos2b.h b/include/configs/aristainetos2b.h
index cfe0e053b6..cdeb7a3b03 100644
--- a/include/configs/aristainetos2b.h
+++ b/include/configs/aristainetos2b.h
@@ -45,9 +45,6 @@
#define CONFIG_LG4573_BUS 0
#define CONFIG_LG4573_CS 1
-#define CONFIG_PWM_IMX
-#define CONFIG_IMX6_PWM_PER_CLK 66000000
-
#include "aristainetos-common.h"
#endif /* __ARISTAINETOS2B_CONFIG_H */
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 21d9a3da01..2c43862800 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -123,7 +123,7 @@
"${board}/flash_blk.img && source ${loadaddr}\0" \
"splashpos=m,m\0" \
"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
- "vidargs=video=mxsfb:640x480-16@60"
+ "vidargs=video=mxsfb:640x480M-16@60"
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x08000000)
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 86f3f0d4fa..147f801353 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -165,25 +165,6 @@
"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
"sdrootpart=2\0"
-#define USB_BOOTCMD \
- "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} rw,noatime " \
- "rootfstype=ext4 rootwait\0" \
- "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
- "setenv bootargs ${defargs} ${setupargs} " \
- "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
- "run usbdtbload; " \
- "load usb ${usbdev}:${usbbootpart} ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} ${dtbparam}\0" \
- "usbbootpart=1\0" \
- "usbdev=0\0" \
- "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
- "${fdt_addr_r} " \
- "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && " \
- "true\0" \
- "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
- "usbrootpart=2\0"
-
#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
@@ -201,7 +182,6 @@
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
SD_BOOTCMD \
- USB_BOOTCMD \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"flash_eth.img && source ${loadaddr}\0" \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 40173b18fa..49cdd61038 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -46,6 +46,46 @@
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
+#ifndef PARTS_DEFAULT
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+ /* Android partitions */ \
+ "partitions_android=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=boot,start=1M,size=32M,uuid=${uuid_gpt_boot};" \
+ "name=environment,size=4M,uuid=${uuid_gpt_environment};" \
+ "name=recovery,size=16M,uuid=${uuid_gpt_recovery};" \
+ "name=system,size=1536M,uuid=${uuid_gpt_system};" \
+ "name=cache,size=512M,uuid=${uuid_gpt_cache};" \
+ "name=device,size=8M,uuid=${uuid_gpt_device};" \
+ "name=misc,size=4M,uuid=${uuid_gpt_misc};" \
+ "name=datafooter,size=2M,uuid=${uuid_gpt_datafooter};" \
+ "name=metadata,size=2M,uuid=${uuid_gpt_metadata};" \
+ "name=persistdata,size=2M,uuid=${uuid_gpt_persistdata};" \
+ "name=userdata,size=128M,uuid=${uuid_gpt_userdata};" \
+ "name=fbmisc,size=-,uuid=${uuid_gpt_fbmisc}\0"
+#endif /* PARTS_DEFAULT */
+
+#define EMMC_ANDROID_BOOTCMD \
+ "android_args=androidboot.storage_type=emmc\0" \
+ PARTS_DEFAULT \
+ "android_fdt_addr=0x83700000\0" \
+ "android_mmc_dev=0\0" \
+ "m4binary=rpmsg_imu_freertos.elf\0" \
+ "androidboot=ext4load mmc 0:a ${loadaddr} media/0/${m4binary}; "\
+ "bootaux ${loadaddr}; " \
+ "setenv loadaddr 0x88000000; " \
+ "setenv bootm_boot_mode sec;" \
+ "setenv bootargs androidboot.serialno=${serial#} " \
+ "$android_args; " \
+ "part start mmc ${android_mmc_dev} boot boot_start; " \
+ "part size mmc ${android_mmc_dev} boot boot_size; " \
+ "mmc read ${loadaddr} ${boot_start} ${boot_size}; " \
+ "part start mmc ${android_mmc_dev} environment env_start; " \
+ "part size mmc ${android_mmc_dev} environment env_size; " \
+ "mmc read ${android_fdt_addr} ${env_start} ${env_size}; " \
+ "bootm ${loadaddr} ${loadaddr} ${android_fdt_addr}\0 "
+
#define EMMC_BOOTCMD \
"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \
"rootfstype=ext4 rootwait\0" \
@@ -63,7 +103,6 @@
"emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \
"emmcrootpart=2\0"
-
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82000000\0" \
@@ -125,7 +164,8 @@
"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
#define MODULE_EXTRA_ENV_SETTINGS \
"variant=-emmc\0" \
- EMMC_BOOTCMD
+ EMMC_BOOTCMD \
+ EMMC_ANDROID_BOOTCMD
#endif
#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 3b1d0a99a1..7d2e573846 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -48,14 +48,6 @@
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_ARP_TIMEOUT 200UL
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED 100000
-
/* MMC Configs */
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
diff --git a/include/configs/display5.h b/include/configs/display5.h
index 8829cbad91..1d3334ff12 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -55,11 +55,8 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
-/*#define CONFIG_MXC_UART*/
#define CONFIG_MXC_UART_BASE UART5_BASE
-/* SPI NOR Flash */
-
/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
@@ -358,8 +355,6 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/* Commands */
-
/* Watchdog */
#define CONFIG_WATCHDOG_TIMEOUT_MSECS 15000
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 0481ed06a9..31214a6aa7 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -198,7 +198,6 @@
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_CMD_BMP
-#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#define CONFIG_PCI
diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h
index 7b68c1c0a1..e98dbfbb7e 100644
--- a/include/configs/m53menlo.h
+++ b/include/configs/m53menlo.h
@@ -242,4 +242,9 @@
"fi ; " \
"fi\0"
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_WATCHDOG
+#define CONFIG_HW_WATCHDOG
+#endif
+
#endif /* __M53MENLO_CONFIG_H__ */
diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h
index a1774c027a..667dac7340 100644
--- a/include/configs/mccmon6.h
+++ b/include/configs/mccmon6.h
@@ -65,13 +65,6 @@
#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) }
-/* MTD support */
-
-/* USB Configs */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-
/* Ethernet Configuration */
#define CONFIG_FEC_MXC
#define IMX_FEC_BASE ENET_BASE_ADDR
@@ -85,6 +78,7 @@
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"boot_os=yes\0" \
+ "disable_giga=yes\0" \
"download_kernel=" \
"tftpboot ${kernel_addr} ${kernel_file};" \
"tftpboot ${fdt_addr} ${fdtfile};\0" \
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index 2d6715cba2..d5b54dfa15 100644
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -211,7 +211,6 @@
#define CONFIG_BCH
/* Backlight Control */
-#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66666000
#endif /* __CONFIG_H */
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index d4db9b4a56..33f06c00b1 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -83,7 +83,6 @@
#define CONFIG_IMX_THERMAL
-#define CONFIG_PWM_IMX
#define CONFIG_IMX6_PWM_PER_CLK 66000000
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 8ceaa0c6c6..73541fe176 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -27,10 +27,23 @@
#define CONFIG_DFU_ENV_SETTINGS \
"dfu_alt_info=boot raw 0x2 0x1000 mmcpart 1\0" \
+/* When booting with FIT specify the node entry containing boot.scr */
+#if defined(CONFIG_FIT)
+#define BOOT_SCR_STRING "source ${bootscriptaddr}:${bootscr_fitimage_name}\0"
+#else
+#define BOOT_SCR_STRING "source ${bootscriptaddr}\0"
+#endif
+
+#ifndef CONFIG_OPTEE_LOAD_ADDR
+#define CONFIG_OPTEE_LOAD_ADDR 0
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_DFU_ENV_SETTINGS \
"script=boot.scr\0" \
+ "bootscr_fitimage_name=bootscr\0" \
"script_signed=boot.scr.imx-signed\0" \
+ "bootscriptaddr=0x83200000\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
"ethact=usb_ether\0" \
@@ -38,6 +51,7 @@
"initrd_high=0xffffffff\0" \
"fdt_file=imx7s-warp.dtb\0" \
"fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \
+ "fdtovaddr=0x83100000\0" \
"optee_addr=" __stringify(CONFIG_OPTEE_LOAD_ADDR)"\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
@@ -51,16 +65,16 @@
"warp7_auth_or_fail=hab_auth_img_or_fail ${hab_ivt_addr} ${filesize} 0;\0" \
"do_bootscript_hab=" \
"if test ${hab_enabled} -eq 1; then " \
- "setexpr hab_ivt_addr ${loadaddr} - ${ivt_offset}; " \
+ "setexpr hab_ivt_addr ${bootscriptaddr} - ${ivt_offset}; " \
"setenv script ${script_signed}; " \
"load mmc ${mmcdev}:${mmcpart} ${hab_ivt_addr} ${script}; " \
"run warp7_auth_or_fail; " \
"run bootscript; "\
"fi;\0" \
"loadbootscript=" \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
+ BOOT_SCR_STRING \
"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
new file mode 100644
index 0000000000..43a25e9c6a
--- /dev/null
+++ b/include/linux/clk-provider.h
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 DENX Software Engineering
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org>
+ */
+#ifndef __LINUX_CLK_PROVIDER_H
+#define __LINUX_CLK_PROVIDER_H
+
+static inline void clk_dm(ulong id, struct clk *clk)
+{
+ if (!IS_ERR(clk))
+ clk->id = id;
+}
+
+/*
+ * flags used across common struct clk. these flags should only affect the
+ * top-level framework. custom flags for dealing with hardware specifics
+ * belong in struct clk_foo
+ *
+ * Please update clk_flags[] in drivers/clk/clk.c when making changes here!
+ */
+#define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */
+#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */
+#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */
+#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
+ /* unused */
+#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */
+#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */
+#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */
+#define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */
+#define CLK_RECALC_NEW_RATES BIT(9) /* recalc rates after notifications */
+#define CLK_SET_RATE_UNGATE BIT(10) /* clock needs to run to set rate */
+#define CLK_IS_CRITICAL BIT(11) /* do not gate, ever */
+/* parents need enable during gate/ungate, set rate and re-parent */
+#define CLK_OPS_PARENT_ENABLE BIT(12)
+/* duty cycle call may be forwarded to the parent clock */
+#define CLK_DUTY_CYCLE_PARENT BIT(13)
+
+#define CLK_MUX_INDEX_ONE BIT(0)
+#define CLK_MUX_INDEX_BIT BIT(1)
+#define CLK_MUX_HIWORD_MASK BIT(2)
+#define CLK_MUX_READ_ONLY BIT(3) /* mux can't be changed */
+#define CLK_MUX_ROUND_CLOSEST BIT(4)
+
+struct clk_mux {
+ struct clk clk;
+ void __iomem *reg;
+ u32 *table;
+ u32 mask;
+ u8 shift;
+ u8 flags;
+
+ /*
+ * Fields from struct clk_init_data - this struct has been
+ * omitted to avoid too deep level of CCF for bootloader
+ */
+ const char * const *parent_names;
+ u8 num_parents;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ u32 io_mux_val;
+#endif
+
+};
+
+#define to_clk_mux(_clk) container_of(_clk, struct clk_mux, clk)
+
+struct clk_div_table {
+ unsigned int val;
+ unsigned int div;
+};
+
+struct clk_divider {
+ struct clk clk;
+ void __iomem *reg;
+ u8 shift;
+ u8 width;
+ u8 flags;
+ const struct clk_div_table *table;
+#if CONFIG_IS_ENABLED(SANDBOX_CLK_CCF)
+ u32 io_divider_val;
+#endif
+};
+
+#define clk_div_mask(width) ((1 << (width)) - 1)
+#define to_clk_divider(_clk) container_of(_clk, struct clk_divider, clk)
+
+#define CLK_DIVIDER_ONE_BASED BIT(0)
+#define CLK_DIVIDER_POWER_OF_TWO BIT(1)
+#define CLK_DIVIDER_ALLOW_ZERO BIT(2)
+#define CLK_DIVIDER_HIWORD_MASK BIT(3)
+#define CLK_DIVIDER_ROUND_CLOSEST BIT(4)
+#define CLK_DIVIDER_READ_ONLY BIT(5)
+#define CLK_DIVIDER_MAX_AT_ZERO BIT(6)
+
+struct clk_fixed_factor {
+ struct clk clk;
+ unsigned int mult;
+ unsigned int div;
+};
+
+#define to_clk_fixed_factor(_clk) container_of(_clk, struct clk_fixed_factor,\
+ clk)
+
+int clk_register(struct clk *clk, const char *drv_name, const char *name,
+ const char *parent_name);
+
+struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ unsigned int mult, unsigned int div);
+
+struct clk *clk_register_divider(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_divider_flags);
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+ const char * const *parent_names, u8 num_parents,
+ unsigned long flags,
+ void __iomem *reg, u8 shift, u8 width,
+ u8 clk_mux_flags);
+
+const char *clk_hw_get_name(const struct clk *hw);
+ulong clk_generic_get_rate(struct clk *clk);
+
+static inline struct clk *dev_get_clk_ptr(struct udevice *dev)
+{
+ return (struct clk *)dev_get_uclass_priv(dev);
+}
+#endif /* __LINUX_CLK_PROVIDER_H */
diff --git a/drivers/mtd/nand/raw/mxs_nand.h b/include/mxs_nand.h
index 4bd65cded9..4bd65cded9 100644
--- a/drivers/mtd/nand/raw/mxs_nand.h
+++ b/include/mxs_nand.h
diff --git a/include/power/bd71837.h b/include/power/bd71837.h
index 38c69b2b90..75e07e1de3 100644
--- a/include/power/bd71837.h
+++ b/include/power/bd71837.h
@@ -1,62 +1,103 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
/* Copyright (C) 2018 ROHM Semiconductors */
-#ifndef BD71837_H_
-#define BD71837_H_
+#ifndef BD718XX_H_
+#define BD718XX_H_
-#define BD71837_REGULATOR_DRIVER "bd71837_regulator"
+#define BD718XX_REGULATOR_DRIVER "bd718x7_regulator"
enum {
- BD71837_REV = 0x00,
- BD71837_SWRESET = 0x01,
- BD71837_I2C_DEV = 0x02,
- BD71837_PWRCTRL0 = 0x03,
- BD71837_PWRCTRL1 = 0x04,
- BD71837_BUCK1_CTRL = 0x05,
- BD71837_BUCK2_CTRL = 0x06,
- BD71837_BUCK3_CTRL = 0x07,
- BD71837_BUCK4_CTRL = 0x08,
- BD71837_BUCK5_CTRL = 0x09,
- BD71837_BUCK6_CTRL = 0x0a,
- BD71837_BUCK7_CTRL = 0x0b,
- BD71837_BUCK8_CTRL = 0x0c,
- BD71837_BUCK1_VOLT_RUN = 0x0d,
- BD71837_BUCK1_VOLT_IDLE = 0x0e,
- BD71837_BUCK1_VOLT_SUSP = 0x0f,
- BD71837_BUCK2_VOLT_RUN = 0x10,
- BD71837_BUCK2_VOLT_IDLE = 0x11,
- BD71837_BUCK3_VOLT_RUN = 0x12,
- BD71837_BUCK4_VOLT_RUN = 0x13,
- BD71837_BUCK5_VOLT = 0x14,
- BD71837_BUCK6_VOLT = 0x15,
- BD71837_BUCK7_VOLT = 0x16,
- BD71837_BUCK8_VOLT = 0x17,
- BD71837_LDO1_VOLT = 0x18,
- BD71837_LDO2_VOLT = 0x19,
- BD71837_LDO3_VOLT = 0x1a,
- BD71837_LDO4_VOLT = 0x1b,
- BD71837_LDO5_VOLT = 0x1c,
- BD71837_LDO6_VOLT = 0x1d,
- BD71837_LDO7_VOLT = 0x1e,
- BD71837_TRANS_COND0 = 0x1f,
- BD71837_TRANS_COND1 = 0x20,
- BD71837_VRFAULTEN = 0x21,
- BD71837_MVRFLTMASK0 = 0x22,
- BD71837_MVRFLTMASK1 = 0x23,
- BD71837_MVRFLTMASK2 = 0x24,
- BD71837_RCVCFG = 0x25,
- BD71837_RCVNUM = 0x26,
- BD71837_PWRONCONFIG0 = 0x27,
- BD71837_PWRONCONFIG1 = 0x28,
- BD71837_RESETSRC = 0x29,
- BD71837_MIRQ = 0x2a,
- BD71837_IRQ = 0x2b,
- BD71837_IN_MON = 0x2c,
- BD71837_POW_STATE = 0x2d,
- BD71837_OUT32K = 0x2e,
- BD71837_REGLOCK = 0x2f,
- BD71837_MUXSW_EN = 0x30,
- BD71837_REG_NUM,
+ ROHM_CHIP_TYPE_BD71837 = 0,
+ ROHM_CHIP_TYPE_BD71847,
+ ROHM_CHIP_TYPE_BD70528,
+ ROHM_CHIP_TYPE_AMOUNT
};
+enum {
+ BD718XX_REV = 0x00,
+ BD718XX_SWRESET = 0x01,
+ BD718XX_I2C_DEV = 0x02,
+ BD718XX_PWRCTRL0 = 0x03,
+ BD718XX_PWRCTRL1 = 0x04,
+ BD718XX_BUCK1_CTRL = 0x05,
+ BD718XX_BUCK2_CTRL = 0x06,
+ BD71837_BUCK3_CTRL = 0x07,
+ BD71837_BUCK4_CTRL = 0x08,
+ BD718XX_1ST_NODVS_BUCK_CTRL = 0x09,
+ BD718XX_2ND_NODVS_BUCK_CTRL = 0x0a,
+ BD718XX_3RD_NODVS_BUCK_CTRL = 0x0b,
+ BD718XX_4TH_NODVS_BUCK_CTRL = 0x0c,
+ BD718XX_BUCK1_VOLT_RUN = 0x0d,
+ BD718XX_BUCK1_VOLT_IDLE = 0x0e,
+ BD718XX_BUCK1_VOLT_SUSP = 0x0f,
+ BD718XX_BUCK2_VOLT_RUN = 0x10,
+ BD718XX_BUCK2_VOLT_IDLE = 0x11,
+ BD71837_BUCK3_VOLT_RUN = 0x12,
+ BD71837_BUCK4_VOLT_RUN = 0x13,
+ BD718XX_1ST_NODVS_BUCK_VOLT = 0x14,
+ BD718XX_2ND_NODVS_BUCK_VOLT = 0x15,
+ BD718XX_3RD_NODVS_BUCK_VOLT = 0x16,
+ BD718XX_4TH_NODVS_BUCK_VOLT = 0x17,
+ BD718XX_LDO1_VOLT = 0x18,
+ BD718XX_LDO2_VOLT = 0x19,
+ BD718XX_LDO3_VOLT = 0x1a,
+ BD718XX_LDO4_VOLT = 0x1b,
+ BD718XX_LDO5_VOLT = 0x1c,
+ BD718XX_LDO6_VOLT = 0x1d,
+ BD71837_LDO7_VOLT = 0x1e,
+ BD718XX_TRANS_COND0 = 0x1f,
+ BD718XX_TRANS_COND1 = 0x20,
+ BD718XX_VRFAULTEN = 0x21,
+ BD718XX_MVRFLTMASK0 = 0x22,
+ BD718XX_MVRFLTMASK1 = 0x23,
+ BD718XX_MVRFLTMASK2 = 0x24,
+ BD718XX_RCVCFG = 0x25,
+ BD718XX_RCVNUM = 0x26,
+ BD718XX_PWRONCONFIG0 = 0x27,
+ BD718XX_PWRONCONFIG1 = 0x28,
+ BD718XX_RESETSRC = 0x29,
+ BD718XX_MIRQ = 0x2a,
+ BD718XX_IRQ = 0x2b,
+ BD718XX_IN_MON = 0x2c,
+ BD718XX_POW_STATE = 0x2d,
+ BD718XX_OUT32K = 0x2e,
+ BD718XX_REGLOCK = 0x2f,
+ BD718XX_MUXSW_EN = 0x30,
+ BD718XX_REG_OTPVER = 0xff,
+ BD718XX_MAX_REGISTER = 0x100,
+};
+
+#define BD718XX_REGLOCK_PWRSEQ 0x1
+#define BD718XX_REGLOCK_VREG 0x10
+
+#define BD718XX_BUCK_EN 0x01
+#define BD718XX_LDO_EN 0x40
+#define BD718XX_BUCK_SEL 0x02
+#define BD718XX_LDO_SEL 0x80
+
+#define DVS_BUCK_RUN_MASK 0x3f
+#define BD718XX_1ST_NODVS_BUCK_MASK 0x07
+#define BD718XX_3RD_NODVS_BUCK_MASK 0x07
+#define BD718XX_4TH_NODVS_BUCK_MASK 0x3f
+
+#define BD71847_BUCK3_MASK 0x07
+#define BD71847_BUCK3_RANGE_MASK 0xc0
+#define BD71847_BUCK4_MASK 0x03
+#define BD71847_BUCK4_RANGE_MASK 0x40
+
+#define BD71837_BUCK5_RANGE_MASK 0x80
+#define BD71837_BUCK6_MASK 0x03
+
+#define BD718XX_LDO1_MASK 0x03
+#define BD718XX_LDO1_RANGE_MASK 0x20
+#define BD718XX_LDO2_MASK 0x20
+#define BD718XX_LDO3_MASK 0x0f
+#define BD718XX_LDO4_MASK 0x0f
+#define BD718XX_LDO6_MASK 0x0f
+
+#define BD71837_LDO5_MASK 0x0f
+#define BD71847_LDO5_MASK 0x0f
+#define BD71847_LDO5_RANGE_MASK 0x20
+#define BD71837_LDO7_MASK 0x0f
+
#endif
diff --git a/include/sandbox-clk.h b/include/sandbox-clk.h
new file mode 100644
index 0000000000..37c9838f76
--- /dev/null
+++ b/include/sandbox-clk.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+#ifndef __SANDBOX_CLK_H__
+#define __SANDBOX_CLK_H__
+
+#include <linux/clk-provider.h>
+
+enum {
+ SANDBOX_CLK_PLL2 = 1,
+ SANDBOX_CLK_PLL3,
+ SANDBOX_CLK_PLL3_60M,
+ SANDBOX_CLK_PLL3_80M,
+ SANDBOX_CLK_ECSPI_ROOT,
+ SANDBOX_CLK_ECSPI0,
+ SANDBOX_CLK_ECSPI1,
+ SANDBOX_CLK_USDHC1_SEL,
+ SANDBOX_CLK_USDHC2_SEL,
+};
+
+enum sandbox_pllv3_type {
+ SANDBOX_PLLV3_GENERIC,
+ SANDBOX_PLLV3_USB,
+};
+
+struct clk *sandbox_clk_pllv3(enum sandbox_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base,
+ u32 div_mask);
+
+static inline struct clk *sandbox_clk_fixed_factor(const char *name,
+ const char *parent,
+ unsigned int mult,
+ unsigned int div)
+{
+ return clk_register_fixed_factor(NULL, name, parent,
+ CLK_SET_RATE_PARENT, mult, div);
+}
+
+static inline struct clk *sandbox_clk_divider(const char *name,
+ const char *parent,
+ void __iomem *reg, u8 shift,
+ u8 width)
+{
+ return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+ reg, shift, width, 0);
+}
+
+struct clk *sandbox_clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 cgr_val, u8 clk_gate_flags);
+
+static inline struct clk *sandbox_clk_gate2(const char *name,
+ const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return sandbox_clk_register_gate2(NULL, name, parent,
+ CLK_SET_RATE_PARENT, reg, shift,
+ 0x3, 0);
+}
+
+static inline struct clk *sandbox_clk_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width,
+ const char * const *parents,
+ int num_parents)
+{
+ return clk_register_mux(NULL, name, parents, num_parents,
+ CLK_SET_RATE_NO_REPARENT, reg, shift,
+ width, 0);
+}
+
+#endif /* __SANDBOX_CLK_H__ */
diff --git a/include/wdt.h b/include/wdt.h
index aa77d3e9b4..5bcff24ab3 100644
--- a/include/wdt.h
+++ b/include/wdt.h
@@ -106,7 +106,7 @@ struct wdt_ops {
int (*expire_now)(struct udevice *dev, ulong flags);
};
-#if defined(CONFIG_WDT)
+#if CONFIG_IS_ENABLED(WDT)
#ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
#define CONFIG_WATCHDOG_TIMEOUT_MSECS (60 * 1000)
#endif
diff --git a/lib/optee/Kconfig b/lib/optee/Kconfig
index 3773d89c31..c398f9b953 100644
--- a/lib/optee/Kconfig
+++ b/lib/optee/Kconfig
@@ -17,6 +17,7 @@ config OPTEE_LOAD_ADDR
config OPTEE_TZDRAM_SIZE
hex "Amount of Trust-Zone RAM for the OPTEE image"
default 0x0000000
+ depends on OPTEE
help
The size of pre-allocated Trust Zone DRAM to allocate for the OPTEE
runtime.
@@ -24,6 +25,7 @@ config OPTEE_TZDRAM_SIZE
config OPTEE_TZDRAM_BASE
hex "Base address of Trust-Zone RAM for the OPTEE image"
default 0x00000000
+ depends on OPTEE
help
The base address of pre-allocated Trust Zone DRAM for
the OPTEE runtime.
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e616f7229b..495988cdcf 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1459,7 +1459,6 @@ CONFIG_PROOF_POINTS
CONFIG_PRPMC_PCI_ALIAS
CONFIG_PSRAM_SCFG
CONFIG_PWM
-CONFIG_PWM_IMX
CONFIG_PXA_LCD
CONFIG_PXA_MMC_GENERIC
CONFIG_PXA_PWR_I2C
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 7b4dd6e12e..55a7940053 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_SOUND) += audio.o
obj-$(CONFIG_BLK) += blk.o
obj-$(CONFIG_BOARD) += board.o
obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o
-obj-$(CONFIG_CLK) += clk.o
+obj-$(CONFIG_CLK) += clk.o clk_ccf.o
obj-$(CONFIG_DM_ETH) += eth.o
obj-$(CONFIG_FIRMWARE) += firmware.o
obj-$(CONFIG_DM_GPIO) += gpio.o
diff --git a/test/dm/clk_ccf.c b/test/dm/clk_ccf.c
new file mode 100644
index 0000000000..8d397593a3
--- /dev/null
+++ b/test/dm/clk_ccf.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <asm/clk.h>
+#include <dm/test.h>
+#include <dm/uclass.h>
+#include <linux/err.h>
+#include <test/ut.h>
+#include <sandbox-clk.h>
+
+/* Tests for Common Clock Framework driver */
+static int dm_test_clk_ccf(struct unit_test_state *uts)
+{
+ struct clk *clk, *pclk;
+ struct udevice *dev;
+ long long rate;
+ int ret;
+
+ /* Get the device using the clk device */
+ ut_assertok(uclass_get_device_by_name(UCLASS_CLK, "clk-ccf", &dev));
+
+ /* Test for clk_get_by_id() */
+ ret = clk_get_by_id(SANDBOX_CLK_ECSPI_ROOT, &clk);
+ ut_assertok(ret);
+ ut_asserteq_str("ecspi_root", clk->dev->name);
+
+ /* Test for clk_get_parent_rate() */
+ ret = clk_get_by_id(SANDBOX_CLK_ECSPI1, &clk);
+ ut_assertok(ret);
+ ut_asserteq_str("ecspi1", clk->dev->name);
+
+ rate = clk_get_parent_rate(clk);
+ ut_asserteq(rate, 20000000);
+
+ /* Test the mux of CCF */
+ ret = clk_get_by_id(SANDBOX_CLK_USDHC1_SEL, &clk);
+ ut_assertok(ret);
+ ut_asserteq_str("usdhc1_sel", clk->dev->name);
+
+ rate = clk_get_parent_rate(clk);
+ ut_asserteq(rate, 60000000);
+
+ ret = clk_get_by_id(SANDBOX_CLK_USDHC2_SEL, &clk);
+ ut_assertok(ret);
+ ut_asserteq_str("usdhc2_sel", clk->dev->name);
+
+ rate = clk_get_parent_rate(clk);
+ ut_asserteq(rate, 80000000);
+
+ pclk = clk_get_parent(clk);
+ ut_asserteq_str("pll3_80m", pclk->dev->name);
+
+ return 1;
+}
+
+DM_TEST(dm_test_clk_ccf, DM_TESTF_SCAN_FDT);