diff options
-rw-r--r-- | board/amcc/canyonlands/init.S | 2 | ||||
-rw-r--r-- | board/amcc/luan/luan.c | 23 | ||||
-rw-r--r-- | board/esd/pci405/cmd_pci405.c | 871 | ||||
-rw-r--r-- | board/esd/pci405/pci405.c | 51 | ||||
-rw-r--r-- | board/ml2/u-boot.lds | 1 | ||||
-rw-r--r-- | board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes | 55 | ||||
-rw-r--r-- | board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld | 52 | ||||
-rw-r--r-- | board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl | 325 | ||||
-rw-r--r-- | cpu/ppc4xx/start.S | 70 | ||||
-rw-r--r-- | include/asm-ppc/ppc4xx-isram.h | 75 | ||||
-rw-r--r-- | include/configs/PCI405.h | 57 | ||||
-rw-r--r-- | include/configs/canyonlands.h | 2 | ||||
-rw-r--r-- | include/configs/katmai.h | 8 | ||||
-rw-r--r-- | include/ppc440.h | 54 |
14 files changed, 167 insertions, 1479 deletions
diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S index 51b46d7107..0b667968ac 100644 --- a/board/amcc/canyonlands/init.S +++ b/board/amcc/canyonlands/init.S @@ -89,7 +89,7 @@ tlbtab: #endif /* TLB-entry for OCM */ - tlbentry(CONFIG_SYS_OCM_BASE, SZ_16K, 0x00040000, 4, AC_R|AC_W|AC_X|SA_I) + tlbentry(CONFIG_SYS_OCM_BASE, SZ_1M, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) /* TLB-entry for Local Configuration registers => peripherals */ tlbentry(CONFIG_SYS_LOCAL_CONF_REGS, SZ_16M, CONFIG_SYS_LOCAL_CONF_REGS, 4, AC_R|AC_W|AC_X|SA_G|SA_I) diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index b28ebf98e9..de3e3d8b92 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -25,6 +25,7 @@ #include <command.h> #include <ppc4xx.h> #include <asm/processor.h> +#include <asm/ppc4xx-isram.h> #include <spd_sdram.h> #include "epld.h" @@ -255,7 +256,7 @@ static int on_off( const char *s ) ************************************************************************/ static void l2cache_disable(void) { - mtdcr( l2_cache_cfg, 0 ); + mtdcr( L2_CACHE_CFG, 0 ); } @@ -265,24 +266,24 @@ static void l2cache_disable(void) ************************************************************************/ static void l2cache_enable(void) /* see p258 7.4.1 Enabling L2 Cache */ { - mtdcr( l2_cache_cfg, 0x80000000 ); /* enable L2_MODE L2_CFG[L2M] */ + mtdcr( L2_CACHE_CFG, 0x80000000 ); /* enable L2_MODE L2_CFG[L2M] */ - mtdcr( l2_cache_addr, 0 ); /* set L2_ADDR with all zeros */ + mtdcr( L2_CACHE_ADDR, 0 ); /* set L2_ADDR with all zeros */ - mtdcr( l2_cache_cmd, 0x80000000 ); /* issue HCLEAR command via L2_CMD */ + mtdcr( L2_CACHE_CMD, 0x80000000 ); /* issue HCLEAR command via L2_CMD */ - while (!(mfdcr( l2_cache_stat ) & 0x80000000 )) ;; /* poll L2_SR for completion */ + while (!(mfdcr( L2_CACHE_STAT ) & 0x80000000 )) ;; /* poll L2_SR for completion */ - mtdcr( l2_cache_cmd, 0x10000000 ); /* clear cache errors L2_CMD[CCP] */ + mtdcr( L2_CACHE_CMD, 0x10000000 ); /* clear cache errors L2_CMD[CCP] */ - mtdcr( l2_cache_cmd, 0x08000000 ); /* clear tag errors L2_CMD[CTE] */ + mtdcr( L2_CACHE_CMD, 0x08000000 ); /* clear tag errors L2_CMD[CTE] */ - mtdcr( l2_cache_snp0, 0 ); /* snoop registers */ - mtdcr( l2_cache_snp1, 0 ); + mtdcr( L2_CACHE_SNP0, 0 ); /* snoop registers */ + mtdcr( L2_CACHE_SNP1, 0 ); __asm__ volatile ("sync"); /* msync */ - mtdcr( l2_cache_cfg, 0xe0000000 ); /* inst and data use L2 */ + mtdcr( L2_CACHE_CFG, 0xe0000000 ); /* inst and data use L2 */ __asm__ volatile ("sync"); } @@ -294,7 +295,7 @@ static void l2cache_enable(void) /* see p258 7.4.1 Enabling L2 Cache */ ************************************************************************/ static int l2cache_status(void) { - return (mfdcr( l2_cache_cfg ) & 0x60000000) != 0; + return (mfdcr( L2_CACHE_CFG ) & 0x60000000) != 0; } diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c index 5c717e253d..f558a2bc63 100644 --- a/board/esd/pci405/cmd_pci405.c +++ b/board/esd/pci405/cmd_pci405.c @@ -32,13 +32,9 @@ #include "pci405.h" - #if defined(CONFIG_CMD_BSP) extern int do_bootm (cmd_tbl_t *, int, int, char *[]); -extern int do_bootvx (cmd_tbl_t *, int, int, char *[]); -unsigned long get_dcr(unsigned short); - /* * Command loadpci: wait for signal from host and boot image. @@ -97,33 +93,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } else { sprintf(addr, "%08x", *ptr); -#if 0 - /* - * Boot image - */ - if (*ptr & 0x00000001) { - /* - * Boot VxWorks image via bootvx - */ - addr[strlen(addr)-1] = '0'; - printf("\nBooting VxWorks-Image at addr 0x%s ...\n", addr); - setenv("loadaddr", addr); - - local_args[0] = argv[0]; - local_args[1] = NULL; - status = do_bootvx (cmdtp, 0, 1, local_args); - } else { - /* - * Boot image via bootm (normally Linux) - */ - printf("\nBooting Image at addr 0x%s ...\n", addr); - setenv("loadaddr", addr); - - local_args[0] = argv[0]; - local_args[1] = NULL; - status = do_bootm (cmdtp, 0, 1, local_args); - } -#else /* * Boot image via bootm */ @@ -133,7 +102,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) local_args[0] = argv[0]; local_args[1] = NULL; status = do_bootm (cmdtp, 0, 1, local_args); -#endif } return 0; @@ -143,843 +111,4 @@ U_BOOT_CMD( "loadpci - Wait for pci-image and boot it\n", NULL ); - -#endif - -#if 1 /* test-only */ -int do_getpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int val; - int i; - - printf("\nPCI Configuration Regs for PPC405GP:"); - for (i=0; i<0x64; i+=4) { - pci_read_config_dword(PCIDEVID_405GP, i, &val); - if (!(i % 0x10)) { - printf("\n%02x: ", i); - } - printf("%08x ", val); - } - printf("\n"); - - return 0; -} -U_BOOT_CMD( - getpci, 1, 1, do_getpci, - "getpci - Print own pci configuration registers\n", - NULL -); - -int do_setpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int addr; - unsigned int val; - - addr = simple_strtol (argv[1], NULL, 16); - val = simple_strtol (argv[2], NULL, 16); - - printf("\nWriting %08x to PCI reg %08x.\n", val, addr); - pci_write_config_dword(PCIDEVID_405GP, addr, val); - - return 0; -} -U_BOOT_CMD( - setpci, 3, 1, do_setpci, - "setpci - Set one pci configuration lword\n", - "<addr> <val>\n" - " - Write pci configuration lword <val> to <addr>.\n" -); - -int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - int i; - - printf("\nDevice Configuration Registers (DCR's) for PPC405GP:"); - for (i=0; i<=0x1e0; i++) { - if (!(i % 0x8)) { - printf("\n%04x ", i); - } - printf("%08lx ", get_dcr(i)); - } - printf("\n"); - - return 0; -} -U_BOOT_CMD( - dumpdcr, 1, 1, do_dumpdcr, - "dumpdcr - Dump all DCR registers\n", - NULL -); - - -int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - printf("\nSpecial Purpose Registers (SPR's) for PPC405GP:"); - printf("\n%04x %08x ", 947, mfspr(947)); - printf("\n%04x %08x ", 9, mfspr(9)); - printf("\n%04x %08x ", 1014, mfspr(1014)); - printf("\n%04x %08x ", 1015, mfspr(1015)); - printf("\n%04x %08x ", 1010, mfspr(1010)); - printf("\n%04x %08x ", 957, mfspr(957)); - printf("\n%04x %08x ", 1008, mfspr(1008)); - printf("\n%04x %08x ", 1018, mfspr(1018)); - printf("\n%04x %08x ", 954, mfspr(954)); - printf("\n%04x %08x ", 950, mfspr(950)); - printf("\n%04x %08x ", 951, mfspr(951)); - printf("\n%04x %08x ", 981, mfspr(981)); - printf("\n%04x %08x ", 980, mfspr(980)); - printf("\n%04x %08x ", 982, mfspr(982)); - printf("\n%04x %08x ", 1012, mfspr(1012)); - printf("\n%04x %08x ", 1013, mfspr(1013)); - printf("\n%04x %08x ", 948, mfspr(948)); - printf("\n%04x %08x ", 949, mfspr(949)); - printf("\n%04x %08x ", 1019, mfspr(1019)); - printf("\n%04x %08x ", 979, mfspr(979)); - printf("\n%04x %08x ", 8, mfspr(8)); - printf("\n%04x %08x ", 945, mfspr(945)); - printf("\n%04x %08x ", 987, mfspr(987)); - printf("\n%04x %08x ", 287, mfspr(287)); - printf("\n%04x %08x ", 953, mfspr(953)); - printf("\n%04x %08x ", 955, mfspr(955)); - printf("\n%04x %08x ", 272, mfspr(272)); - printf("\n%04x %08x ", 273, mfspr(273)); - printf("\n%04x %08x ", 274, mfspr(274)); - printf("\n%04x %08x ", 275, mfspr(275)); - printf("\n%04x %08x ", 260, mfspr(260)); - printf("\n%04x %08x ", 276, mfspr(276)); - printf("\n%04x %08x ", 261, mfspr(261)); - printf("\n%04x %08x ", 277, mfspr(277)); - printf("\n%04x %08x ", 262, mfspr(262)); - printf("\n%04x %08x ", 278, mfspr(278)); - printf("\n%04x %08x ", 263, mfspr(263)); - printf("\n%04x %08x ", 279, mfspr(279)); - printf("\n%04x %08x ", 26, mfspr(26)); - printf("\n%04x %08x ", 27, mfspr(27)); - printf("\n%04x %08x ", 990, mfspr(990)); - printf("\n%04x %08x ", 991, mfspr(991)); - printf("\n%04x %08x ", 956, mfspr(956)); - printf("\n%04x %08x ", 284, mfspr(284)); - printf("\n%04x %08x ", 285, mfspr(285)); - printf("\n%04x %08x ", 986, mfspr(986)); - printf("\n%04x %08x ", 984, mfspr(984)); - printf("\n%04x %08x ", 256, mfspr(256)); - printf("\n%04x %08x ", 1, mfspr(1)); - printf("\n%04x %08x ", 944, mfspr(944)); - printf("\n"); - - return 0; -} -U_BOOT_CMD( - dumpspr, 1, 1, do_dumpspr, - "dumpspr - Dump all SPR registers\n", - NULL -); - - -#define PCI0_BRDGOPT1 0x4a -#define plb0_acr 0x87 - -int do_getplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned short val; - - printf("PLB0_ACR=%08lx\n", get_dcr(0x87)); - pci_read_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, &val); - printf("PCI0_BRDGOPT1=%04x\n", val); - printf("CCR0=%08x\n", mfspr(ccr0)); - - return 0; -} -U_BOOT_CMD( - getplb, 1, 1, do_getplb, - "getplb - Dump all plb arbiter registers\n", - NULL -); - -int do_setplb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int my_acr; - unsigned int my_brdgopt1; - unsigned int my_ccr0; - - my_acr = simple_strtol (argv[1], NULL, 16); - my_brdgopt1 = simple_strtol (argv[2], NULL, 16); - my_ccr0 = simple_strtol (argv[3], NULL, 16); - - mtdcr(plb0_acr, my_acr); - pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, my_brdgopt1); - mtspr(ccr0, my_ccr0); - - return 0; -} -U_BOOT_CMD( - setplb, 4, 1, do_setplb, - "setplb - Set all plb arbiter registers\n", - "PLB0_ACR PCI0_BRDGOPT1 CCR0\n" - " - Set all plb arbiter registers\n" -); - - -/*********************************************************************** - * - * The following code is only for test purposes!!!! - * Please ignore this ugly stuff!!!!!!!!!!!!!!!!!!! - * - ***********************************************************************/ - -#define PCI_ADDR 0xc0000000 - -int do_writepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int addr; - unsigned int size; - unsigned int countmax; - int i; - int max; - volatile unsigned long *ptr; - volatile unsigned long val; - int loopcount = 0; - int test_pci_read = 0; - int test_pci_cfg_write = 0; - int test_sync = 0; - int test_pci_pre_read = 0; - - addr = simple_strtol (argv[1], NULL, 16); - size = simple_strtol (argv[2], NULL, 16); - countmax = simple_strtol (argv[3], NULL, 16); - if (countmax == 0) - countmax = 1000; - - do_getplb(NULL, 0, 0, NULL); - -#if 0 - out32r(PMM0LA, 0); - out32r(PMM0PCILA, 0); - out32r(PMM0PCIHA, 0); - out32r(PMM0MA, 0); - out32r(PMM1LA, PCI_ADDR); - out32r(PMM1PCILA, addr & 0xff000000); - out32r(PMM1PCIHA, 0x00000000); - out32r(PMM1MA, 0xff000001); -#endif - - printf("PMM1LA =%08lx\n", in32r(PMM1LA)); - printf("PMM1MA =%08lx\n", in32r(PMM1MA)); - printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA)); - printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA)); - - addr = PCI_ADDR | (addr & 0x00ffffff); - printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); - - max = size >> 2; - - pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ - - val = *(ulong *)0x00000000; - if (val & 0x00000008) { - test_pci_pre_read = 1; - printf("Running test with pre pci-memory-read access!\n"); - } - if (val & 0x00000004) { - test_sync = 1; - printf("Running test with sync instruction!\n"); - } - if (val & 0x00000001) { - test_pci_read = 1; - printf("Running test with pci-memory-read access!\n"); - } - if (val & 0x00000002) { - test_pci_cfg_write = 1; - printf("Running test with pci-config-write access!\n"); - } - - while (1) { - - if (test_pci_pre_read) { - /* - * Read one value back - */ - ptr = (volatile unsigned long *)addr; - val = *ptr; - } - - /* - * Write some values to host via pci busmastering - */ - ptr = (volatile unsigned long *)addr; - for (i=0; i<max; i++) { - *ptr++ = i; - } - - if (test_sync) { - /* - * Sync previous writes - */ - ppcSync(); - } - - if (test_pci_read) { - /* - * Read one value back - */ - ptr = (volatile unsigned long *)addr; - val = *ptr; - } - - if (test_pci_cfg_write) { - /* - * Generate IRQ to host via config regs - */ - pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); - } - - if (loopcount++ > countmax) { - /* Abort if ctrl-c was pressed */ - if (ctrlc()) { - puts("\nAbort\n"); - return 0; - } - - putc('.'); - - loopcount = 0; - } - } - - return 0; -} -U_BOOT_CMD( - writepci, 4, 1, do_writepci, - "writepci - Write some data to pcibus\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - -#define PCI_CFGADDR 0xeec00000 -#define PCI_CFGDATA 0xeec00004 - -int ibmPciConfigWrite -( - int offset, /* offset into the configuration space */ - int width, /* data width */ - unsigned int data /* data to be written */ - ) -{ - /* - * Write config register address to the PCI config address register - * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation) - */ - out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC)); - -#if 0 /* test-only */ - ppcSync(); -#endif - - /* - * Write value to be written to the PCI config data register - */ - switch ( width ) { - case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF)); - break; - case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF)); - break; - case 4: out32r(PCI_CFGDATA | (offset & 0x3), data); - break; - } - - return (0); -} - -int do_writepci2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int addr; - unsigned int size; - unsigned int countmax; - int max; - volatile unsigned long *ptr; - volatile unsigned long val; - int loopcount = 0; - - addr = simple_strtol (argv[1], NULL, 16); - size = simple_strtol (argv[2], NULL, 16); - countmax = simple_strtol (argv[3], NULL, 16); - if (countmax == 0) - countmax = 1000; - - do_getplb(NULL, 0, 0, NULL); - -#if 0 - out32r(PMM0LA, 0); - out32r(PMM0PCILA, 0); - out32r(PMM0PCIHA, 0); - out32r(PMM0MA, 0); - out32r(PMM1LA, PCI_ADDR); - out32r(PMM1PCILA, addr & 0xff000000); - out32r(PMM1PCIHA, 0x00000000); - out32r(PMM1MA, 0xff000001); -#endif - - printf("PMM1LA =%08lx\n", in32r(PMM1LA)); - printf("PMM1MA =%08lx\n", in32r(PMM1MA)); - printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA)); - printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA)); - - addr = PCI_ADDR | (addr & 0x00ffffff); - printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); - - max = size >> 2; - - pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ - - while (1) { - - /* - * Write one values to host via pci busmastering - */ - ptr = (volatile unsigned long *)addr; - *ptr = 0x01234567; - - /* - * Read one value back - */ - ptr = (volatile unsigned long *)addr; - val = *ptr; - - /* - * One pci config write - */ -/* pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */ -/* ibmPciConfigWrite(0x44, 1, 0x00); */ - ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */ - - if (loopcount++ > countmax) { - /* Abort if ctrl-c was pressed */ - if (ctrlc()) { - puts("\nAbort\n"); - return 0; - } - - putc('.'); - - loopcount = 0; - } - } - - return 0; -} -U_BOOT_CMD( - writepci2, 4, 1, do_writepci2, - "writepci2- Write some data to pcibus\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - -int do_writepci22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int addr; - unsigned int size; - unsigned int countmax = 0; - volatile unsigned long *ptr; - volatile unsigned long val; - - addr = simple_strtol (argv[1], NULL, 16); - size = simple_strtol (argv[2], NULL, 16); - - addr = PCI_ADDR | (addr & 0x00ffffff); - printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); - pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ - - while (1) { - - /* - * Write one values to host via pci busmastering - */ - ptr = (volatile unsigned long *)addr; - *ptr = 0x01234567; - - /* - * Read one value back - */ - ptr = (volatile unsigned long *)addr; - val = *ptr; - - /* - * One pci config write - */ - ibmPciConfigWrite(0x2e, 2, 0x1234); /* subsystem id */ - } - - return 0; -} -U_BOOT_CMD( - writepci22, 4, 1, do_writepci22, - "writepci22- Write some data to pcibus\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - -int ibmPciConfigWrite3 -( - int offset, /* offset into the configuration space */ - int width, /* data width */ - unsigned int data /* data to be written */ - ) -{ - /* - * Write config register address to the PCI config address register - * bit 31 must be 1 and bits 1:0 must be 0 (note LE bit notation) - */ - out32r(PCI_CFGADDR, 0x80000000 | (offset & 0xFFFFFFFC)); - -#if 1 /* test-only */ - ppcSync(); -#endif - - /* - * Write value to be written to the PCI config data register - */ - switch ( width ) { - case 1: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned char)(data & 0xFF)); - break; - case 2: out32r(PCI_CFGDATA | (offset & 0x3), (unsigned short)(data & 0xFFFF)); - break; - case 4: out32r(PCI_CFGDATA | (offset & 0x3), data); - break; - } - - return (0); -} - -int do_writepci3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int addr; - unsigned int size; - unsigned int countmax; - int max; - volatile unsigned long *ptr; - volatile unsigned long val; - int loopcount = 0; - - addr = simple_strtol (argv[1], NULL, 16); - size = simple_strtol (argv[2], NULL, 16); - countmax = simple_strtol (argv[3], NULL, 16); - if (countmax == 0) - countmax = 1000; - - do_getplb(NULL, 0, 0, NULL); - -#if 0 - out32r(PMM0LA, 0); - out32r(PMM0PCILA, 0); - out32r(PMM0PCIHA, 0); - out32r(PMM0MA, 0); - out32r(PMM1LA, PCI_ADDR); - out32r(PMM1PCILA, addr & 0xff000000); - out32r(PMM1PCIHA, 0x00000000); - out32r(PMM1MA, 0xff000001); -#endif - - printf("PMM1LA =%08lx\n", in32r(PMM1LA)); - printf("PMM1MA =%08lx\n", in32r(PMM1MA)); - printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA)); - printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA)); - - addr = PCI_ADDR | (addr & 0x00ffffff); - printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); - - max = size >> 2; - - pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ - - while (1) { - - /* - * Write one values to host via pci busmastering - */ - ptr = (volatile unsigned long *)addr; - *ptr = 0x01234567; - - /* - * Read one value back - */ - ptr = (volatile unsigned long *)addr; - val = *ptr; - - /* - * One pci config write - */ -/* pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */ -/* ibmPciConfigWrite(0x44, 1, 0x00); */ - ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */ - - if (loopcount++ > countmax) { - /* Abort if ctrl-c was pressed */ - if (ctrlc()) { - puts("\nAbort\n"); - return 0; - } - - putc('.'); - - loopcount = 0; - } - } - - return 0; -} -U_BOOT_CMD( - writepci3, 4, 1, do_writepci3, - "writepci3- Write some data to pcibus\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - - -#define SECTOR_SIZE 32 /* 32 byte cache line */ -#define SECTOR_MASK 0x1F - -void my_flush_dcache(ulong lcl_addr, ulong count) -{ - unsigned int lcl_target; - - /* promote to nearest cache sector */ - lcl_target = (lcl_addr + count + SECTOR_SIZE - 1) & ~SECTOR_MASK; - lcl_addr &= ~SECTOR_MASK; - while (lcl_addr != lcl_target) - { - /* ppcDcbf((void *)lcl_addr);*/ - __asm__("dcbf 0,%0": :"r" (lcl_addr)); - lcl_addr += SECTOR_SIZE; - } - __asm__("sync"); /* Always flush prefetch queue in any case */ -} - -int do_writepci_cache(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int addr; - unsigned int size; - unsigned int countmax; - int i; - volatile unsigned long *ptr; - volatile unsigned long val; - int loopcount = 0; - - addr = simple_strtol (argv[1], NULL, 16); - size = simple_strtol (argv[2], NULL, 16); - countmax = simple_strtol (argv[3], NULL, 16); - if (countmax == 0) - countmax = 1000; - - do_getplb(NULL, 0, 0, NULL); - -#if 0 - out32r(PMM0LA, 0); - out32r(PMM0PCILA, 0); - out32r(PMM0PCIHA, 0); - out32r(PMM0MA, 0); - out32r(PMM1LA, PCI_ADDR); - out32r(PMM1PCILA, addr & 0xff000000); - out32r(PMM1PCIHA, 0x00000000); - out32r(PMM1MA, 0xff000001); -#endif - - printf("PMM1LA =%08lx\n", in32r(PMM1LA)); - printf("PMM1MA =%08lx\n", in32r(PMM1MA)); - printf("PMM1PCILA =%08lx\n", in32r(PMM1PCILA)); - printf("PMM1PCIHA =%08lx\n", in32r(PMM1PCIHA)); - - addr = PCI_ADDR | (addr & 0x00ffffff); - printf("\nWriting at addr %08x, size %08x (countmax=%x)\n", addr, size, countmax); - - pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ - - i = 0; - - /* - * Set pci region as cachable - */ - ppcSync(); - __asm__ volatile (" addis 4,0,0x0000 "); - __asm__ volatile (" addi 4,4,0x0080 "); - __asm__ volatile (" mtdccr 4 "); - ppcSync(); - - while (1) { - - /* - * Write one values to host via pci busmastering - */ - ptr = (volatile unsigned long *)addr; - printf("A\n"); /* test-only */ - *ptr++ = i++; - *ptr++ = i++; - *ptr++ = i++; - *ptr++ = i++; - *ptr++ = i++; - *ptr++ = i++; - *ptr++ = i++; - *ptr++ = i++; - printf("B\n"); /* test-only */ - my_flush_dcache(addr, 32); - printf("C\n"); /* test-only */ - - /* - * Read one value back - */ - ptr = (volatile unsigned long *)addr; - val = *ptr; - printf("D\n"); /* test-only */ - - /* - * One pci config write - */ -/* pci_write_config_byte(PCIDEVID_405GP, 0x44, 0x00); */ -/* ibmPciConfigWrite(0x44, 1, 0x00); */ - ibmPciConfigWrite3(0x2e, 2, 0x1234); /* subsystem id */ - printf("E\n"); /* test-only */ - - if (loopcount++ > countmax) { - /* Abort if ctrl-c was pressed */ - if (ctrlc()) { - puts("\nAbort\n"); - return 0; - } - - putc('.'); - - loopcount = 0; - } - } - - return 0; -} -U_BOOT_CMD( - writepci_cache, 4, 1, do_writepci_cache, - "writepci_cache - Write some data to pcibus\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - -int do_savepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int *ptr; - int i; - - /* - * Save own pci configuration in PRAM - */ - memset((char *)PCI_REGS_ADDR, 0, PCI_REGS_LEN); - ptr = (unsigned int *)PCI_REGS_ADDR + 1; - for (i=0; i<0x40; i+=4) { - pci_read_config_dword(PCIDEVID_405GP, i, ptr++); - } - ptr = (unsigned int *)PCI_REGS_ADDR; - *ptr = crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4); - - printf("\nStoring PCI Configuration Regs...\n"); - - return 0; -} -U_BOOT_CMD( - savepci, 4, 1, do_savepci, - "savepci - Save all pci regs\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - -int do_restorepci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - unsigned int *ptr; - int i; - - /* - * Rewrite pci config regs (only after soft-reset with magic set) - */ - ptr = (unsigned int *)PCI_REGS_ADDR; - if (crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4) == *ptr) { - puts("Restoring PCI Configurations Regs!\n"); - ptr = (unsigned int *)PCI_REGS_ADDR + 1; - for (i=0; i<0x40; i+=4) { - pci_write_config_dword(PCIDEVID_405GP, i, *ptr++); - } - } - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - - return 0; -} -U_BOOT_CMD( - restorepci, 4, 1, do_restorepci, - "restorepci - Restore all pci regs\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - - -extern void write_without_sync(void); -extern void write_with_sync(void); -extern void write_with_less_sync(void); -extern void write_with_more_sync(void); - -/* - * code from IBM-PPCSUPP - */ -int do_writeibm1(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ - - write_without_sync(); - - return 0; -} -U_BOOT_CMD( - writeibm1, 4, 1, do_writeibm1, - "writeibm1- Write some data to pcibus (without sync)\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - -int do_writeibm2(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ - - write_with_sync(); - - return 0; -} -U_BOOT_CMD( - writeibm2, 4, 1, do_writeibm2, - "writeibm2- Write some data to pcibus (with sync)\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - -int do_writeibm22(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ - - write_with_less_sync(); - - return 0; -} -U_BOOT_CMD( - writeibm22, 4, 1, do_writeibm22, - "writeibm22- Write some data to pcibus (with less sync)\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); - -int do_writeibm3(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - pci_write_config_word(PCIDEVID_405GP, 0x04, 0x0106); /* write command reg */ - - write_with_more_sync(); - - return 0; -} -U_BOOT_CMD( - writeibm3, 4, 1, do_writeibm3, - "writeibm3- Write some data to pcibus (with more sync)\n", - "<addr> <size>\n" - " - Write some data to pcibus.\n" -); #endif diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 9112788981..42774ad209 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -27,6 +27,7 @@ #include <malloc.h> #include <pci.h> #include <asm/4xx_pci.h> +#include <asm/io.h> #include "pci405.h" @@ -34,7 +35,7 @@ DECLARE_GLOBAL_DATA_PTR; /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); -int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);/*cmd_boot.c*/ +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); unsigned long fpga_done_state(void); unsigned long fpga_init_state(void); @@ -57,11 +58,11 @@ const unsigned char fpgadata[] = */ #include "../common/fpga.c" -#define FPGA_DONE_STATE_V11 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_DONE) -#define FPGA_DONE_STATE_V12 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12) +#define FPGA_DONE_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE) +#define FPGA_DONE_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12) -#define FPGA_INIT_STATE_V11 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_INIT) -#define FPGA_INIT_STATE_V12 (in32(GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12) +#define FPGA_INIT_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT) +#define FPGA_INIT_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12) int board_revision(void) @@ -78,10 +79,10 @@ int board_revision(void) */ cntrl0Reg = mfdcr(cntrl0); mtdcr(cntrl0, cntrl0Reg | 0x03000000); - out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00100200); - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00100200); + out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00100200); + out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00100200); udelay(1000); /* wait some time before reading input */ - value = in32(GPIO0_IR) & 0x00100200; /* get config bits */ + value = in_be32((void*)GPIO0_IR) & 0x00100200; /* get config bits */ /* * Restore GPIO settings @@ -137,10 +138,10 @@ int board_early_init_f (void) /* * First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board) */ - out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ - out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */ - out32(GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */ - out32(GPIO0_OR, 0); /* pull prg low */ + out_be32((void*)GPIO0_ODR, 0x00000000); /* no open drain pins */ + out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */ + out_be32((void*)GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */ + out_be32((void*)GPIO0_OR, 0); /* pull prg low */ /* * IRQ 0-15 405GP internally generated; active high; level sensitive @@ -181,15 +182,6 @@ int board_early_init_f (void) return 0; } - -/* ------------------------------------------------------------------------- */ - -int misc_init_f (void) -{ - return 0; /* dummy implementation */ -} - - int misc_init_r (void) { unsigned char *dst; @@ -284,13 +276,11 @@ int misc_init_r (void) *magic = 0; /* clear pci reconfig magic again */ } -#if 1 /* test-only */ /* * Decrease PLB latency timeout and reduce priority of the PCI bridge master */ #define PCI0_BRDGOPT1 0x4a pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20); -/* pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f60); */ #define plb0_acr 0x87 /* @@ -298,14 +288,6 @@ int misc_init_r (void) */ mtdcr(plb0_acr, 0x98000000); -#if 0 /* test-only */ - printf("CCR0=%08x\n", mfspr(ccr0)); /* test-only */ -/* mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00100000); */ - mtspr(ccr0, (mfspr(ccr0) & 0xff8fffff) | 0x00000000); -#endif -/* printf("CCR0=%08x\n", mfspr(ccr0)); */ /* test-only */ -#endif - free(dst); return (0); } @@ -314,7 +296,6 @@ int misc_init_r (void) /* * Check Board Identity: */ - int checkboard (void) { char str[64]; @@ -340,10 +321,10 @@ int checkboard (void) */ cntrl0Reg = mfdcr(cntrl0); mtdcr(cntrl0, cntrl0Reg & ~0x08000000); - out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x40000000); - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x40000000); + out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x40000000); + out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x40000000); udelay(1000); /* wait some time before reading input */ - value = in32(GPIO0_IR) & 0x40000000; /* get config bits */ + value = in_be32((void*)GPIO0_IR) & 0x40000000; /* get config bits */ if (value) { puts(", 33 MHz PCI"); } else { diff --git a/board/ml2/u-boot.lds b/board/ml2/u-boot.lds index 28c654619e..13ceea0429 100644 --- a/board/ml2/u-boot.lds +++ b/board/ml2/u-boot.lds @@ -63,7 +63,6 @@ SECTIONS cpu/ppc4xx/4xx_uart.o (.text) cpu/ppc4xx/cpu_init.o (.text) cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) common/dlmalloc.o (.text) lib_generic/crc32.o (.text) lib_ppc/extable.o (.text) diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes deleted file mode 100644 index 9daf147096..0000000000 --- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash - -if [ $# -ne 1 ] -then - echo "usage: Ltypes filename" >&2 - exit 2 -fi - -FILE="$1" -#TMPFILE='mktemp "${FILE}.XXXXXX"' || exit 1 -TMPFILE=${FILE}.`date "+%s"` -touch $TMPFILE || exit 1 - -# Change all the Xilinx types to Linux types and put the result into a temp file -sed \ - -e 's/\bXTRUE\b/TRUE/g' \ - -e 's/\bXFALSE\b/FALSE/g' \ - -e 's/\bXNULL\b/NULL/g' \ - -e 's/"xenv.h"/<asm\/delay.h>/g' \ - -e 's/\bXENV_USLEEP\b/udelay/g' \ - -e 's/\bXuint8\b/u8/g' \ - -e 's/\bXuint16\b/u16/g' \ - -e 's/\bXuint32\b/u32/g' \ - -e 's/\bXint8\b/s8/g' \ - -e 's/\bXint16\b/s16/g' \ - -e 's/\bXint32\b/s32/g' \ - -e 's/\bXboolean\b/u32/g' \ - "${FILE}" > "${TMPFILE}" - -# Overlay the original file with the temp file -mv "${TMPFILE}" "${FILE}" - -# Are we doing xbasic_types.h? -if [ "${FILE##*/}" = xbasic_types.h ] -then - # Remember as you're reading this that we've already gone through the prior - # sed script. We need to do some other things to xbasic_types.h: - # 1) Add ifndefs around TRUE and FALSE defines - # 2) Remove definition of NULL as NULL - # 3) Replace most of the primitive types section with a #include - sed \ - -e '/u32 true/,/#define false/Ic\ -#ifndef TRUE\ -#define TRUE 1\ -#endif\ -#ifndef FALSE\ -#define FALSE 0\ -#endif' \ - -e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' \ - -e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\ -#include <linux/types.h>' \ - "${FILE}" > "${TMPFILE}" - - mv "${TMPFILE}" "${FILE}" -fi diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld deleted file mode 100644 index 516924126d..0000000000 --- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld +++ /dev/null @@ -1,52 +0,0 @@ -# (c) Copyright 2004 Xilinx Inc. -# Author: Xilinx, Inc. -# -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation; either version 2 of the License, or (at your -# option) any later version. -# -# -# XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A -# COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS -# ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, -# XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE -# FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING -# ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. -# XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO -# THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY -# WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM -# CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND -# FITNESS FOR A PARTICULAR PURPOSE. -# -# -# Xilinx hardware products are not intended for use in life support -# appliances, devices, or systems. Use in such applications is -# expressly prohibited. -# -# -# (c) Copyright 2002-2004 Xilinx Inc. -# All rights reserved. -# -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 675 Mass Ave, Cambridge, MA 02139, USA. - -OPTION psf_version = 2.1; - -BEGIN LIBRARY uboot OPTION DRC = uboot_drc; - -BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot"; -PROPERTY size = 0; -PARAM name = periph_name, desc = "Name of Peripheral connected", type = string; -END ARRAY - PARAMETER name = TARGET_DIR, desc = "Target Directory for U-Boot BSP", type = string; - -# location of persistent storage in the IIC EEPROM (defaults are set for ML300) -PARAMETER name = IIC_PERSISTENT_BASEADDR, desc = "Start of persistent storage block in the EEPROM address space", type = int, default = 1024; -PARAMETER name = IIC_PERSISTENT_HIGHADDR, desc = "End of persistent storage block in the EEPROM address space", type = int, default = 2047; -PARAMETER name = IIC_PERSISTENT_EEPROMADDR, desc = "Address of the EEPROM on the IIC bus", type = int, default = 0xA0; - -END LIBRARY diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl deleted file mode 100644 index 9d44f4493d..0000000000 --- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl +++ /dev/null @@ -1,325 +0,0 @@ -# -# Author: Xilinx, Inc. -# -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation; either version 2 of the License, or (at your -# option) any later version. -# -# -# XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A -# COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS -# ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, -# XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE -# FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING -# ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. -# XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO -# THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY -# WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM -# CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND -# FITNESS FOR A PARTICULAR PURPOSE. -# -# -# Xilinx hardware products are not intended for use in life support -# appliances, devices, or systems. Use in such applications is -# expressly prohibited. -# -# -# (c) Copyright 2002-2004 Xilinx Inc. -# All rights reserved. -# -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 675 Mass Ave, Cambridge, MA 02139, USA. -# -# Globals -lappend drvlist -set ltypes "../../../sw_services/uboot_v1_00_a/data/Ltypes" - -proc uboot_drc {lib_handle} { - puts "U-Boot DRC..." -} - -proc generate {libname} { - - global drvlist - - # Get list of peripherals connected to uboot - set conn_periphs [xget_handle $libname "ARRAY" "connected_periphs"] - #lappend drvlist - if {[string compare -nocase $conn_periphs ""] != 0} { - set conn_periphs_elems [xget_handle $conn_periphs "ELEMENTS" "*"] - # For each periph - foreach periph_elem $conn_periphs_elems { - set periph [xget_value $periph_elem "PARAMETER" "periph_name"] - # 1. Get driver - set drv [xget_swhandle $periph] - set posn [lsearch -exact $drvlist $drv] - if {$posn == -1} { - lappend drvlist $drv - } - } - - set file_handle [xopen_include_file "xparameters.h"] - puts $file_handle "\n/******************************************************************/\n" - puts $file_handle "/* U-Boot Redefines */" - puts $file_handle "\n/******************************************************************/\n" - close $file_handle - - foreach drv $drvlist { - set drvname [xget_value $drv "NAME"] - - #Redefines xparameters.h - if {[string compare -nocase $drvname "uartns550"] == 0} { - xredefine_uartns550 $drv "xparameters.h" - } elseif {[string compare -nocase $drvname "emac"] == 0} { - xredefine_emac $drv "xparameters.h" - } elseif {[string compare -nocase $drvname "iic"] == 0} { - xredefine_iic $drv "xparameters.h" - } - } - } - - # define core_clock - xredefine_params $libname "xparameters.h" "CORE_CLOCK_FREQ_HZ" - - # define the values for the persistent storage in IIC - xredefine_params $libname "xparameters.h" "IIC_PERSISTENT_BASEADDR" "IIC_PERSISTENT_HIGHADDR" "IIC_PERSISTENT_EEPROMADDR" - -} - -proc xget_corefreq {} { - set processor [xget_processor] - set name [xget_value $processor "NAME"] - puts "procname : $name" - set processor_driver [xget_swhandle [xget_value $processor "NAME"]] - puts "procdrv : $processor_driver" - if {[string compare -nocase $processor_driver ""] != 0} { - set arg "CORE_CLOCK_FREQ_HZ" - #set retval [xget_value $processor_driver "PARAMETER" $arg] - set retval [xget_dname [xget_value $processor_driver "NAME"] $arg] - return $retval - } -} - -# procedure that adds # defines to xparameters.h as XPAR_argument -proc xredefine_params {handle file_name args} { - - puts "xredfine ..." - # Open include file - set file_handle [xopen_include_file $file_name] - puts "args : $args" - - foreach arg $args { - if {[string compare -nocase $arg "CORE_CLOCK_FREQ_HZ"] == 0} { - set value [xget_corefreq] - puts "corefreq : $value" - } else { - set value [xget_value $handle "PARAMETER" $arg] - puts "value : $value" - } - - if {$value != ""} { - set value [xformat_addr_string $value $arg] - - if {[string compare -nocase $arg "IIC_PERSISTENT_BASEADDR"] == 0} { - set name "PERSISTENT_0_IIC_0_BASEADDR" - } elseif {[string compare -nocase $arg "IIC_PERSISTENT_HIGHADDR"] == 0} { - set name "PERSISTENT_0_IIC_0_HIGHADDR" - } elseif {[string compare -nocase $arg "IIC_PERSISTENT_EEPROMADDR"] == 0} { - set name "PERSISTENT_0_IIC_0_EEPROMADDR" - } else { - set name [string toupper $arg] - } - set name [format "XPAR_%s" $name] - puts $file_handle "#define $name $value" - } - } - - puts $file_handle "\n/******************************************************************/\n" - close $file_handle -} - -# uart redefines... -proc xredefine_uartns550 {drvhandle file_name} { - - xredefine_include_file $drvhandle $file_name "uartns550" "C_BASEADDR" "C_HIGHADDR" "CLOCK_HZ" "DEVICE_ID" - -} - -proc xredefine_emac {drvhandle file_name} { - - xredefine_include_file $drvhandle $file_name "emac" "C_BASEADDR" "C_HIGHADDR" "C_DMA_PRESENT" "C_MII_EXIST" "C_ERR_COUNT_EXIST" "DEVICE_ID" - -} - -proc xredefine_iic {drvhandle file_name} { - xredefine_include_file $drvhandle $file_name "iic" "C_BASEADDR" "C_HIGHADDR" "C_TEN_BIT_ADR" "DEVICE_ID" - -} - -####################### - -proc xredefine_include_file {drv_handle file_name drv_string args} { - - # Open include file - set file_handle [xopen_include_file $file_name] - - # Get all peripherals connected to this driver - set periphs [xget_periphs $drv_handle] - - set pname [format "XPAR_%s_" [string toupper $drv_string]] - - # Print all parameters for all peripherals - set device_id 0 - set sub_periphs 1 - foreach periph $periphs { - puts "$periph : $drv_string : $sub_periphs" - - for {set i 0} {$i < $sub_periphs} {incr i} { - foreach arg $args { - set name "${pname}${device_id}_" - - if {[string compare -nocase "CLOCK_HZ" $arg] == 0} { - set xdrv_string [format "%s%s" "X" $drv_string] - set value [xget_dname $xdrv_string $arg] - set name "${name}CLOCK_FREQ_HZ" - } else { - if {[string match C_* $arg]} { - set name [format "%s%s" $name [string range $arg 2 end]] - } else { - set name "${name}${arg}" - } - set value [xget_name $periph $arg] - } - - if {[string compare -nocase "uartns550" $drv_string] == 0} { - if {[string compare -nocase "C_BASEADDR" $arg] == 0} { - set value [format "(%s%s%s)" $value "+" "0x1000"] - } - } - - puts $file_handle "#define $name $value" - if {[string compare -nocase "DEVICE_ID" $arg] == 0} { - incr device_id - } - } - } - } - puts $file_handle "\n/******************************************************************/\n" - close $file_handle -} - -################################################## -# procedure post_generate -# This generates the drivers directory for uboot -# and runs the ltypes script -################################################## - -proc post_generate {lib_handle} { - - global drvlist - - # Create U-Boot tree structure - set pwd [pwd] - set common_dir "uboot/board/xilinx/common" - set xilinx_enet_dir "uboot/board/xilinx/xilinx_enet" - set ml300_dir "uboot/board/xilinx/ml300" - - exec bash -c "mkdir -p $common_dir $xilinx_enet_dir $ml300_dir" - - # Copy files for xilinx_ocp - xcopy_commonfiles - - foreach drv $drvlist { - set drvname [xget_value $drv "NAME"] - set ver [xget_value $drv "PARAMETER" "DRIVER_VER"] - set ver [string map {. _} $ver] - set dirname [format "%s_v%s" $drvname $ver] - - if {[string compare -nocase $drvname "emac"] == 0} { - xcopy_emac $drv $dirname - } elseif {[string compare -nocase $drvname "iic"] == 0} { - xcopy_iic $drv $dirname - } - } - - # Call Ltypes Script here - set uboot "uboot" - xltype_file $uboot - - # Move xparameters.h around - exec bash -c "cp ../../include/xparameters.h $ml300_dir" - - # copy the whole U-Boot BSP to its final destination - set value [xget_value $lib_handle "PARAMETER" TARGET_DIR] - puts "TARGET_DIR : $value" - - if {$value != ""} { - if {[file isdirectory $value] == 0} { - exec bash -c "mkdir -p $value" - } - exec bash -c "cp -Rp uboot/* $value" - } -} - -proc xcopy_commonfiles {} { - - global drvlist - - set common_dir "uboot/board/xilinx/common" - - foreach drv $drvlist { - set depends [xget_value $drv "OPTION" "DEPENDS"] - foreach dep $depends { - puts "dep : $dep" - if {[file isdirectory "../$dep"] == 1} { - exec bash -c "cp -f ../$dep/src/*.c $common_dir" - exec bash -c "cp -f ../$dep/src/*.h $common_dir" - } - } - } - -} - -proc xcopy_emac {drv_handle dirname} { - set emac "board/xilinx/xilinx_enet" - xcopy_dir $dirname $emac -} - -proc xcopy_iic {drv_handle dirname} { - set iic "board/xilinx/xilinx_iic" - xcopy_dir $dirname $iic -} - -proc xcopy_dir {srcdir dstdir} { - - set dstdirname [format "%s%s" "uboot/" $dstdir] - if {[file isdirectory "../$srcdir"] == 1} { - # Copy files from src to dst - exec bash -c "mkdir -p $dstdirname" - exec bash -c "cp -f ../$srcdir/src/*.c $dstdirname" - exec bash -c "cp -f ../$srcdir/src/*.h $dstdirname" - } else { - puts "$srcdir does not exist ..." - } -} - - -proc xltype_file {filename} { - - global ltypes - - puts $filename - - if {[file isdirectory $filename]} { - foreach entry [glob -nocomplain [file join $filename *]] { - xltype_file $entry - } - } else { - exec bash -c "$ltypes $filename" - } - -} diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 882ef219a5..e68cf9b6db 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -72,6 +72,7 @@ #include <asm/cache.h> #include <asm/mmu.h> +#include <asm/ppc4xx-isram.h> #ifndef CONFIG_IDENT_STRING #define CONFIG_IDENT_STRING "" @@ -677,67 +678,80 @@ _start: /* not all PPC's have internal SRAM usable as L2-cache */ #if defined(CONFIG_440GX) || \ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_460SX) - mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */ + mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */ +#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) + lis r1, 0x0000 + ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */ + mtdcr L2_CACHE_CFG,r1 #endif lis r2,0x7fff ori r2,r2,0xffff - mfdcr r1,isram0_dpc + mfdcr r1,ISRAM0_DPC and r1,r1,r2 /* Disable parity check */ - mtdcr isram0_dpc,r1 - mfdcr r1,isram0_pmeg + mtdcr ISRAM0_DPC,r1 + mfdcr r1,ISRAM0_PMEG and r1,r1,r2 /* Disable pwr mgmt */ - mtdcr isram0_pmeg,r1 + mtdcr ISRAM0_PMEG,r1 lis r1,0x8000 /* BAS = 8000_0000 */ #if defined(CONFIG_440GX) || defined(CONFIG_440SP) ori r1,r1,0x0980 /* first 64k */ - mtdcr isram0_sb0cr,r1 + mtdcr ISRAM0_SB0CR,r1 lis r1,0x8001 ori r1,r1,0x0980 /* second 64k */ - mtdcr isram0_sb1cr,r1 + mtdcr ISRAM0_SB1CR,r1 lis r1, 0x8002 ori r1,r1, 0x0980 /* third 64k */ - mtdcr isram0_sb2cr,r1 + mtdcr ISRAM0_SB2CR,r1 lis r1, 0x8003 ori r1,r1, 0x0980 /* fourth 64k */ - mtdcr isram0_sb3cr,r1 -#elif defined(CONFIG_440SPE) - lis r1,0x0000 /* BAS = 0000_0000 */ + mtdcr ISRAM0_SB3CR,r1 +#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT) + lis r1,0x0000 /* BAS = X_0000_0000 */ ori r1,r1,0x0984 /* first 64k */ - mtdcr isram0_sb0cr,r1 + mtdcr ISRAM0_SB0CR,r1 lis r1,0x0001 ori r1,r1,0x0984 /* second 64k */ - mtdcr isram0_sb1cr,r1 + mtdcr ISRAM0_SB1CR,r1 lis r1, 0x0002 ori r1,r1, 0x0984 /* third 64k */ - mtdcr isram0_sb2cr,r1 + mtdcr ISRAM0_SB2CR,r1 lis r1, 0x0003 ori r1,r1, 0x0984 /* fourth 64k */ - mtdcr isram0_sb3cr,r1 -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) - lis r1,0x4000 /* BAS = 8000_0000 */ - ori r1,r1,0x4580 /* 16k */ - mtdcr isram0_sb0cr,r1 + mtdcr ISRAM0_SB3CR,r1 +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) + lis r2,0x7fff + ori r2,r2,0xffff + mfdcr r1,ISRAM1_DPC + and r1,r1,r2 /* Disable parity check */ + mtdcr ISRAM1_DPC,r1 + mfdcr r1,ISRAM1_PMEG + and r1,r1,r2 /* Disable pwr mgmt */ + mtdcr ISRAM1_PMEG,r1 + + lis r1,0x0004 /* BAS = 4_0004_0000 */ + ori r1,r1,0x0984 /* 64k */ + mtdcr ISRAM1_SB0CR,r1 +#endif #elif defined(CONFIG_460SX) lis r1,0x0000 /* BAS = 0000_0000 */ ori r1,r1,0x0B84 /* first 128k */ - mtdcr isram0_sb0cr,r1 + mtdcr ISRAM0_SB0CR,r1 lis r1,0x0001 ori r1,r1,0x0B84 /* second 128k */ - mtdcr isram0_sb1cr,r1 + mtdcr ISRAM0_SB1CR,r1 lis r1, 0x0002 ori r1,r1, 0x0B84 /* third 128k */ - mtdcr isram0_sb2cr,r1 + mtdcr ISRAM0_SB2CR,r1 lis r1, 0x0003 ori r1,r1, 0x0B84 /* fourth 128k */ - mtdcr isram0_sb3cr,r1 + mtdcr ISRAM0_SB3CR,r1 #elif defined(CONFIG_440GP) ori r1,r1,0x0380 /* 8k rw */ - mtdcr isram0_sb0cr,r1 - mtdcr isram0_sb1cr,r0 /* Disable bank 1 */ + mtdcr ISRAM0_SB0CR,r1 + mtdcr ISRAM0_SB1CR,r0 /* Disable bank 1 */ #endif #endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */ @@ -1440,6 +1454,10 @@ relocate_code: dccci 0,0 /* Invalidate data cache, now no longer our stack */ sync isync + + /* Clear all potential pending exceptions */ + mfspr r1,mcsr + mtspr mcsr,r1 #ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */ #else diff --git a/include/asm-ppc/ppc4xx-isram.h b/include/asm-ppc/ppc4xx-isram.h new file mode 100644 index 0000000000..d6d17ac961 --- /dev/null +++ b/include/asm-ppc/ppc4xx-isram.h @@ -0,0 +1,75 @@ + +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _PPC4xx_ISRAM_H_ +#define _PPC4xx_ISRAM_H_ + +/* + * Internal SRAM + */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define ISRAM0_DCR_BASE 0x380 +#else +#define ISRAM0_DCR_BASE 0x020 +#endif +#define ISRAM0_SB0CR (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/ +#define ISRAM0_SB1CR (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/ +#define ISRAM0_SB2CR (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/ +#define ISRAM0_SB3CR (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/ +#define ISRAM0_BEAR (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */ +#define ISRAM0_BESR0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */ +#define ISRAM0_BESR1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */ +#define ISRAM0_PMEG (ISRAM0_DCR_BASE+0x07) /* SRAM power management */ +#define ISRAM0_CID (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */ +#define ISRAM0_REVID (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */ +#define ISRAM0_DPC (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */ + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define ISRAM1_DCR_BASE 0x0B0 +#define ISRAM1_SB0CR (ISRAM1_DCR_BASE+0x00) /* SRAM1 bank config 0*/ +#define ISRAM1_BEAR (ISRAM1_DCR_BASE+0x04) /* SRAM1 bus error addr reg */ +#define ISRAM1_BESR0 (ISRAM1_DCR_BASE+0x05) /* SRAM1 bus error status reg 0 */ +#define ISRAM1_BESR1 (ISRAM1_DCR_BASE+0x06) /* SRAM1 bus error status reg 1 */ +#define ISRAM1_PMEG (ISRAM1_DCR_BASE+0x07) /* SRAM1 power management */ +#define ISRAM1_CID (ISRAM1_DCR_BASE+0x08) /* SRAM1 bus core id reg */ +#define ISRAM1_REVID (ISRAM1_DCR_BASE+0x09) /* SRAM1 bus revision id reg */ +#define ISRAM1_DPC (ISRAM1_DCR_BASE+0x0a) /* SRAM1 data parity check reg */ +#endif /* CONFIG_460EX || CONFIG_460GT */ + +/* + * L2 Cache + */ +#if defined (CONFIG_440GX) || \ + defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_460SX) +#define L2_CACHE_BASE 0x030 +#define L2_CACHE_CFG (L2_CACHE_BASE+0x00) /* L2 Cache Config */ +#define L2_CACHE_CMD (L2_CACHE_BASE+0x01) /* L2 Cache Command */ +#define L2_CACHE_ADDR (L2_CACHE_BASE+0x02) /* L2 Cache Address */ +#define L2_CACHE_DATA (L2_CACHE_BASE+0x03) /* L2 Cache Data */ +#define L2_CACHE_STAT (L2_CACHE_BASE+0x04) /* L2 Cache Status */ +#define L2_CACHE_CVER (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */ +#define L2_CACHE_SNP0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */ +#define L2_CACHE_SNP1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */ +#endif /* CONFIG_440GX */ + +#endif /* _PPC4xx_ISRAM_H_ */ diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 0393366b5c..d0a37d7bc5 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -60,39 +60,24 @@ #define CONFIG_PREBOOT /* enable preboot variable */ -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ - -#define CONFIG_RTC_M48T35A 1 /* ST Electronics M48 timekeeper */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - /* * Command line configuration. */ #include <config_cmd_default.h> +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_ITEST +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + #define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ #define CONFIG_CMD_ELF -#define CONFIG_CMD_DATE #define CONFIG_CMD_I2C #define CONFIG_CMD_BSP #define CONFIG_CMD_EEPROM - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -102,7 +87,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ @@ -166,15 +150,9 @@ #define CONFIG_SYS_PCI_PTM1MS 0xff000001 /* 16MB, enable hard-wired to 1 */ #define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#if 0 /* test-only */ -#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ -#else #define CONFIG_SYS_PCI_PTM2LA 0xef600000 /* point to internal regs */ #define CONFIG_SYS_PCI_PTM2MS 0xffe00001 /* 2MB, enable */ #define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ -#endif /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -215,22 +193,10 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#if 0 /* Use NVRAM for environment variables */ -/*----------------------------------------------------------------------- - * NVRAM organization - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#define CONFIG_ENV_SIZE 0x0ff8 /* Size of Environment vars */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-(CONFIG_ENV_SIZE+8)) /* Env */ - -#else /* Use EEPROM for environment variables */ - #define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ #define CONFIG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars*/ /* total size of a CAT24WC08 is 1024 bytes */ -#endif #define CONFIG_SYS_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */ #define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */ @@ -327,14 +293,6 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in data cache) */ -#if 0 /* test-only */ -#define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#else /* use on chip memory ( OCM ) for temperary stack until sdram is tested */ #define CONFIG_SYS_TEMP_STACK_OCM 1 /* On Chip Memory location */ @@ -346,7 +304,6 @@ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#endif /* * Internal Definitions diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index f8e880181b..faf630496d 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -102,7 +102,7 @@ #define CONFIG_SYS_FLASH_BASE_PHYS (((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) | \ (u64)CONFIG_SYS_FLASH_BASE_PHYS_L) -#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 16k */ +#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */ #define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */ #define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000 diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 58694cca4b..ea6cf0d23f 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -53,6 +53,13 @@ #define CONFIG_HOSTNAME katmai #include "amcc-common.h" +/* + * For booting 256K-paged Linux we should have 16MB of memory + * for Linux initial memory map + */ +#undef CONFIG_SYS_BOOTMAPSZ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) + #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #undef CONFIG_SHOW_BOOT_PROGRESS @@ -189,6 +196,7 @@ /* * Commands additional to the ones defined in amcc-common.h */ +#define CONFIG_CMD_EXT2 #define CONFIG_CMD_DATE #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM diff --git a/include/ppc440.h b/include/ppc440.h index ea0ac86d08..01f6eaf35e 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -169,18 +169,9 @@ #define sdr_ecid1 0x0081 #define sdr_ecid2 0x0082 #define sdr_jtag 0x00c0 -#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) -#define sdr_ddrdl 0x00e0 -#else -#define sdr_cfg 0x00e0 -#define SDR_CFG_LT2_MASK 0x01000000 /* Leakage test 2*/ -#define SDR_CFG_64_32BITS_MASK 0x01000000 /* Switch DDR 64 bits or 32 bits */ -#define SDR_CFG_32BITS 0x00000000 /* 32 bits */ -#define SDR_CFG_64BITS 0x01000000 /* 64 bits */ -#define SDR_CFG_MC_V2518_MASK 0x02000000 /* Low VDD2518 (2.5 or 1.8V) */ -#define SDR_CFG_MC_V25 0x00000000 /* 2.5 V */ -#define SDR_CFG_MC_V18 0x02000000 /* 1.8 V */ -#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define SDR0_DDRCFG 0x00e0 +#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */ #define sdr_ebc 0x0100 #define sdr_uart0 0x0120 /* UART0 Config */ #define sdr_uart1 0x0121 /* UART1 Config */ @@ -616,45 +607,6 @@ #endif /* 440EP || 440GR || 440EPX || 440GRX */ -/*----------------------------------------------------------------------------- - | L2 Cache - +----------------------------------------------------------------------------*/ -#if defined (CONFIG_440GX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) -#define L2_CACHE_BASE 0x030 -#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */ -#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */ -#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */ -#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */ -#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */ -#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */ -#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */ -#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */ - -#endif /* CONFIG_440GX */ - -/*----------------------------------------------------------------------------- - | Internal SRAM - +----------------------------------------------------------------------------*/ -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define ISRAM0_DCR_BASE 0x380 -#else -#define ISRAM0_DCR_BASE 0x020 -#endif -#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/ -#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/ -#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/ -#define isram0_sb3cr (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/ -#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */ -#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */ -#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */ -#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */ -#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */ -#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */ -#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */ - #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) |