diff options
151 files changed, 3318 insertions, 998 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2298e6e7d7..cefa8f40d0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -846,6 +846,7 @@ config ARCH_SUNXI select CMD_GPIO select CMD_MMC if MMC select CMD_USB if DISTRO_DEFAULTS + select CLK select DM select DM_ETH select DM_GPIO diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ce5e845a2c..5c3225bcbf 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -399,6 +399,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN50I_H5) += \ + sun50i-h5-emlid-neutis-n5-devboard.dtb \ sun50i-h5-libretech-all-h3-cc.dtb \ sun50i-h5-nanopi-neo2.dtb \ sun50i-h5-nanopi-neo-plus2.dtb \ diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts new file mode 100644 index 0000000000..493947c9b1 --- /dev/null +++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-h5-emlid-neutis-n5.dtsi" + +/ { + model = "Emlid Neutis N5 Developer board"; + compatible = "emlid,emlid-neutis-n5-devboard", + "emlid,emlid-neutis-n5", + "allwinner,sun50i-h5"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + status = "okay"; + }; + + vdd_cpux: gpio-regulator { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "Mic", + "MIC2", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&emac { + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi new file mode 100644 index 0000000000..8e1e37db27 --- /dev/null +++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dtsi @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-h5.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ + post-power-on-delay-ms = <200>; + }; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun9i-a80-cubieboard4.dts b/arch/arm/dts/sun9i-a80-cubieboard4.dts index 1526b41c70..85da85faf8 100644 --- a/arch/arm/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts @@ -47,7 +47,6 @@ #include "sun9i-a80.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Cubietech Cubieboard4"; @@ -63,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard4>; green { label = "cubieboard4:green:usr"; @@ -76,18 +73,96 @@ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ }; }; + + vga-connector { + compatible = "vga-connector"; + label = "vga"; + ddc-i2c-bus = <&i2c3>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_dac_out>; + }; + }; + }; + + vga-dac { + compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; + vdd-supply = <®_dcdc1>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vga_dac_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + vga_dac_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; +}; + +&de { + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; }; &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ - cd-inverted; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH18 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_cldo3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; status = "okay"; }; +&mmc1_pins { + bias-pull-up; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -100,23 +175,12 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; }; -&pio { - led_pins_cubieboard4: led-pins@0 { - allwinner,pins = "PH6", "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; +&osc32k { + /* osc32k input is from AC100 */ + clocks = <&ac100_rtc 0>; }; &r_ir { @@ -248,14 +312,166 @@ reg_rtc_ldo: rtc_ldo { regulator-name = "vcc-rtc-vdd1v8-io"; }; + + sw { + /* unused */ + }; + }; + }; + + axp806: pmic@745 { + compatible = "x-powers,axp806"; + reg = <0x745>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + bldoin-supply = <®_dcdce>; + + regulators { + reg_s_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + aldo2 { + /* + * unused, but use a different name to + * avoid name clash with axp809's aldo's + */ + regulator-name = "s_aldo2"; + }; + + aldo3 { + /* + * unused, but use a different name to + * avoid name clash with axp809's aldo's + */ + regulator-name = "s_aldo3"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-name = "vcc18-efuse-adc-display-csi"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-name = + "vdd18-drampll-vcc18-pll-cpvdd"; + }; + + bldo3 { + /* unused */ + }; + + reg_bldo4: bldo4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vcc12-hsic"; + }; + + reg_cldo1: cldo1 { + /* + * This was 3V in the original design, but + * 3.3V is the recommended supply voltage + * for the Ethernet PHY. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-gmac-phy"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "afvcc-cam"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io-wifi-codec-io2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-vpu"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + regulator-name = "vcc-bldo-codec-ldoin"; + }; + + sw { + /* + * unused, but use a different name to + * avoid name clash with axp809's sw + */ + regulator-name = "s_sw"; + }; + }; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; }; }; }; #include "axp809.dtsi" +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd0_rgb888_pins>; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_dac_in>; + }; +}; + &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun9i-a80-cx-a99.dts b/arch/arm/dts/sun9i-a80-cx-a99.dts index a30b6fec56..cf126bbd2c 100644 --- a/arch/arm/dts/sun9i-a80-cx-a99.dts +++ b/arch/arm/dts/sun9i-a80-cx-a99.dts @@ -365,7 +365,7 @@ */ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts index 7fd22e8886..58a199b0e4 100644 --- a/arch/arm/dts/sun9i-a80-optimus.dts +++ b/arch/arm/dts/sun9i-a80-optimus.dts @@ -46,7 +46,6 @@ #include "sun9i-a80.dtsi" #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> / { model = "Merrii A80 Optimus Board"; @@ -63,11 +62,8 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>; /* The LED names match those found on the board */ - led2 { label = "optimus:led2:usr"; gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; @@ -87,8 +83,6 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_optimus>; - regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -98,13 +92,19 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_pin_optimus>; - regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &ehci0 { @@ -112,7 +112,8 @@ }; &ehci1 { - status = "okay"; + /* Enable if HSIC peripheral is connected */ + status = "disabled"; }; &ehci2 { @@ -121,14 +122,28 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ - cd-inverted; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; /* PH8 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_cldo3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; status = "okay"; }; +&mmc1_pins { + bias-pull-up; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -141,7 +156,7 @@ &mmc2_8bit_pins { /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; + drive-strength = <40>; }; &ohci0 { @@ -152,49 +167,15 @@ status = "okay"; }; -&pio { - led_pins_optimus: led-pins@0 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_optimus: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb1_vbus_pin_optimus: usb1_vbus_pin@1 { - allwinner,pins = "PH4"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb3_vbus_pin_optimus: usb3_vbus_pin@1 { - allwinner,pins = "PH5"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&osc32k { + /* osc32k input is from AC100 */ + clocks = <&ac100_rtc 0>; }; &r_ir { status = "okay"; }; -&r_pio { - led_r_pins_optimus: led-pins@1 { - allwinner,pins = "PM15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - &r_rsb { status = "okay"; @@ -320,6 +301,146 @@ reg_rtc_ldo: rtc_ldo { regulator-name = "vcc-rtc-vdd1v8-io"; }; + + sw { + /* unused */ + }; + }; + }; + + axp806: pmic@745 { + compatible = "x-powers,axp806"; + reg = <0x745>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + bldoin-supply = <®_dcdce>; + + regulators { + reg_s_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + aldo2 { + /* + * unused, but use a different name to + * avoid name clash with axp809's aldo's + */ + regulator-name = "s_aldo2"; + }; + + aldo3 { + /* + * unused, but use a different name to + * avoid name clash with axp809's aldo's + */ + regulator-name = "s_aldo3"; + }; + + reg_bldo1: bldo1 { + regulator-always-on; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-name = "vcc18-efuse-adc-display-csi"; + }; + + reg_bldo2: bldo2 { + regulator-always-on; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-name = + "vdd18-drampll-vcc18-pll-cpvdd"; + }; + + bldo3 { + /* unused */ + }; + + reg_bldo4: bldo4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vcc12-hsic"; + }; + + reg_cldo1: cldo1 { + /* + * This was 3V in the original design, but + * 3.3V is the recommended supply voltage + * for the Ethernet PHY. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-gmac-phy"; + }; + + reg_cldo2: cldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "afvcc-cam"; + }; + + reg_cldo3: cldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io-wifi-codec-io2"; + }; + + reg_dcdca: dcdca { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpub"; + }; + + reg_dcdcd: dcdcd { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-vpu"; + }; + + reg_dcdce: dcdce { + regulator-always-on; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + regulator-name = "vcc-bldo-codec-ldoin"; + }; + + sw { + /* + * unused, but use a different name to + * avoid name clash with axp809's sw + */ + regulator-name = "s_sw"; + }; + }; + }; + + ac100: codec@e89 { + compatible = "x-powers,ac100"; + reg = <0xe89>; + + ac100_codec: codec { + compatible = "x-powers,ac100-codec"; + interrupt-parent = <&r_pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */ + #clock-cells = <0>; + clock-output-names = "4M_adda"; + }; + + ac100_rtc: rtc { + compatible = "x-powers,ac100-rtc"; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + clocks = <&ac100_codec>; + #clock-cells = <1>; + clock-output-names = "cko1_rtc", + "cko2_rtc", + "cko3_rtc"; }; }; }; @@ -328,7 +449,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; @@ -338,7 +459,9 @@ }; &usbphy2 { - status = "okay"; + phy-supply = <®_bldo4>; + /* Enable if HSIC peripheral is connected */ + status = "disabled"; }; &usbphy3 { diff --git a/arch/arm/dts/sun9i-a80.dtsi b/arch/arm/dts/sun9i-a80.dtsi index 92412b2ac1..25591d6883 100644 --- a/arch/arm/dts/sun9i-a80.dtsi +++ b/arch/arm/dts/sun9i-a80.dtsi @@ -42,13 +42,18 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton64.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/clock/sun9i-a80-ccu.h> +#include <dt-bindings/clock/sun9i-a80-de.h> +#include <dt-bindings/clock/sun9i-a80-usb.h> +#include <dt-bindings/reset/sun9i-a80-ccu.h> +#include <dt-bindings/reset/sun9i-a80-de.h> +#include <dt-bindings/reset/sun9i-a80-usb.h> / { + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; cpus { @@ -58,57 +63,76 @@ cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x0>; }; cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x1>; }; cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x2>; }; cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; + cci-control-port = <&cci_control0>; + clock-frequency = <12000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x3>; }; cpu4: cpu@100 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x100>; }; cpu5: cpu@101 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x101>; }; cpu6: cpu@102 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x102>; }; cpu7: cpu@103 { compatible = "arm,cortex-a15"; device_type = "cpu"; + cci-control-port = <&cci_control1>; + clock-frequency = <18000000>; + enable-method = "allwinner,sun9i-a80-smp"; reg = <0x103>; }; }; - memory { - /* 8GB max. with LPAE */ - reg = <0 0x20000000 0x02 0>; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -139,7 +163,7 @@ * would also throw all the PLL clock rates off, or just the * downstream clocks in the PRCM. */ - osc24M: osc24M_clk { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -148,244 +172,28 @@ /* * The 32k clock is from an external source, normally the - * AC100 codec/RTC chip. This clock is by default enabled - * and clocked at 32768 Hz, from the oscillator connected - * to the AC100. It is configurable, but no such driver or - * bindings exist yet. + * AC100 codec/RTC chip. This serves as a placeholder for + * board dts files to specify the source. */ - osc32k: osc32k_clk { + osc32k: clk-32k { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; clock-output-names = "osc32k"; }; - usb_mod_clk: clk@00a08000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun9i-a80-usb-mod-clk"; - reg = <0x00a08000 0x4>; - clocks = <&ahb1_gates 1>; - clock-output-names = "usb0_ahb", "usb_ohci0", - "usb1_ahb", "usb_ohci1", - "usb2_ahb", "usb_ohci2"; - }; - - usb_phy_clk: clk@00a08004 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun9i-a80-usb-phy-clk"; - reg = <0x00a08004 0x4>; - clocks = <&ahb1_gates 1>; - clock-output-names = "usb_phy0", "usb_hsic1_480M", - "usb_phy1", "usb_hsic2_480M", - "usb_phy2", "usb_hsic_12M"; - }; - - pll3: clk@06000008 { - /* placeholder until implemented */ - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-rate = <0>; - clock-output-names = "pll3"; - }; - - pll4: clk@0600000c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-pll4-clk"; - reg = <0x0600000c 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll12: clk@0600002c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-pll4-clk"; - reg = <0x0600002c 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll12"; - }; - - gt_clk: clk@0600005c { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-gt-clk"; - reg = <0x0600005c 0x4>; - clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "gt"; - }; - - ahb0: clk@06000060 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000060 0x4>; - clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb0"; - }; - - ahb1: clk@06000064 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000064 0x4>; - clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb1"; - }; - - ahb2: clk@06000068 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-ahb-clk"; - reg = <0x06000068 0x4>; - clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "ahb2"; - }; - - apb0: clk@06000070 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-apb0-clk"; - reg = <0x06000070 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "apb0"; - }; - - apb1: clk@06000074 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-apb1-clk"; - reg = <0x06000074 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "apb1"; - }; - - cci400_clk: clk@06000078 { - #clock-cells = <0>; - compatible = "allwinner,sun9i-a80-gt-clk"; - reg = <0x06000078 0x4>; - clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>; - clock-output-names = "cci400"; - }; - - mmc0_clk: clk@06000410 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000410 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc0", "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@06000414 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000414 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc1", "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@06000418 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x06000418 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc2", "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@0600041c { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-mmc-clk"; - reg = <0x0600041c 0x4>; - clocks = <&osc24M>, <&pll4>; - clock-output-names = "mmc3", "mmc3_output", - "mmc3_sample"; - }; - - ahb0_gates: clk@06000580 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; - reg = <0x06000580 0x4>; - clocks = <&ahb0>; - clock-indices = <0>, <1>, <3>, - <5>, <8>, <12>, - <13>, <14>, - <15>, <16>, <18>, - <20>, <21>, <22>, - <23>; - clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", - "ahb0_ss", "ahb0_sd", "ahb0_nand1", - "ahb0_nand0", "ahb0_sdram", - "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", - "ahb0_spi0", "ahb0_spi1", "ahb0_spi2", - "ahb0_spi3"; - }; - - ahb1_gates: clk@06000584 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; - reg = <0x06000584 0x4>; - clocks = <&ahb1>; - clock-indices = <0>, <1>, - <17>, <21>, - <22>, <23>, - <24>; - clock-output-names = "ahb1_usbotg", "ahb1_usbhci", - "ahb1_gmac", "ahb1_msgbox", - "ahb1_spinlock", "ahb1_hstimer", - "ahb1_dma"; - }; - - ahb2_gates: clk@06000588 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; - reg = <0x06000588 0x4>; - clocks = <&ahb2>; - clock-indices = <0>, <1>, - <2>, <4>, <5>, - <7>, <8>, <11>; - clock-output-names = "ahb2_lcd0", "ahb2_lcd1", - "ahb2_edp", "ahb2_csi", "ahb2_hdmi", - "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; - }; - - apb0_gates: clk@06000590 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-apb0-gates-clk"; - reg = <0x06000590 0x4>; - clocks = <&apb0>; - clock-indices = <1>, <5>, - <11>, <12>, <13>, - <15>, <17>, <18>, - <19>; - clock-output-names = "apb0_spdif", "apb0_pio", - "apb0_ac97", "apb0_i2s0", "apb0_i2s1", - "apb0_lradc", "apb0_gpadc", "apb0_twd", - "apb0_cirtx"; - }; - - apb1_gates: clk@06000594 { - #clock-cells = <1>; - compatible = "allwinner,sun9i-a80-apb1-gates-clk"; - reg = <0x06000594 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <1>, - <2>, <3>, <4>, - <16>, <17>, - <18>, <19>, - <20>, <21>; - clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", - "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3", - "apb1_uart4", "apb1_uart5"; - }; - - cpus_clk: clk@08001410 { + cpus_clk: clk@8001410 { compatible = "allwinner,sun9i-a80-cpus-clk"; reg = <0x08001410 0x4>; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>; + clocks = <&osc32k>, <&osc24M>, + <&ccu CLK_PLL_PERIPH0>, + <&ccu CLK_PLL_AUDIO>; clock-output-names = "cpus"; }; - ahbs: ahbs_clk { + ahbs: clk-ahbs { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; @@ -394,7 +202,7 @@ clock-output-names = "ahbs"; }; - apbs: clk@0800141c { + apbs: clk@800141c { compatible = "allwinner,sun8i-a23-apb0-clk"; reg = <0x0800141c 0x4>; #clock-cells = <0>; @@ -402,7 +210,7 @@ clock-output-names = "apbs"; }; - apbs_gates: clk@08001428 { + apbs_gates: clk@8001428 { compatible = "allwinner,sun9i-a80-apbs-gates-clk"; reg = <0x08001428 0x4>; #clock-cells = <1>; @@ -423,7 +231,7 @@ "apbs_i2s1", "apbs_twd"; }; - r_1wire_clk: clk@08001450 { + r_1wire_clk: clk@8001450 { reg = <0x08001450 0x4>; #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -431,7 +239,7 @@ clock-output-names = "r_1wire"; }; - r_ir_clk: clk@08001454 { + r_ir_clk: clk@8001454 { reg = <0x08001454 0x4>; #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -440,6 +248,12 @@ }; }; + de: display-engine { + compatible = "allwinner,sun9i-a80-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -450,103 +264,149 @@ */ ranges = <0 0 0 0x20000000>; - ehci0: usb@00a00000 { + sram_b: sram@20000 { + /* 256 KiB secure SRAM at 0x20000 */ + compatible = "mmio-sram"; + reg = <0x00020000 0x40000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00020000 0x40000>; + + smp-sram@1000 { + /* + * This is checked by BROM to determine if + * cpu0 should jump to SMP entry vector + */ + compatible = "allwinner,sun9i-a80-smp-sram"; + reg = <0x1000 0x8>; + }; + }; + + ehci0: usb@a00000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a00000 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 1>; - resets = <&usb_mod_clk 17>; + clocks = <&usb_clocks CLK_BUS_HCI0>; + resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; }; - ohci0: usb@00a00400 { + ohci0: usb@a00400 { compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a00400 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>; - resets = <&usb_mod_clk 17>; + clocks = <&usb_clocks CLK_BUS_HCI0>, + <&usb_clocks CLK_USB_OHCI0>; + resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; }; - usbphy1: phy@00a00800 { + usbphy1: phy@a00800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a00800 0x4>; - clocks = <&usb_phy_clk 1>; + clocks = <&usb_clocks CLK_USB0_PHY>; clock-names = "phy"; - resets = <&usb_phy_clk 17>; + resets = <&usb_clocks RST_USB0_PHY>; reset-names = "phy"; status = "disabled"; #phy-cells = <0>; }; - ehci1: usb@00a01000 { + ehci1: usb@a01000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a01000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 3>; - resets = <&usb_mod_clk 18>; + clocks = <&usb_clocks CLK_BUS_HCI1>; + resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; phy-names = "usb"; status = "disabled"; }; - usbphy2: phy@00a01800 { + usbphy2: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; - clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, - <&usb_phy_clk 3>; - clock-names = "hsic_480M", "hsic_12M", "phy"; - resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; - reset-names = "hsic", "phy"; + clocks = <&usb_clocks CLK_USB1_HSIC>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB1_PHY>; + clock-names = "hsic_480M", + "hsic_12M", + "phy"; + resets = <&usb_clocks RST_USB1_HSIC>, + <&usb_clocks RST_USB1_PHY>; + reset-names = "hsic", + "phy"; status = "disabled"; #phy-cells = <0>; /* usb1 is always used with HSIC */ phy_type = "hsic"; }; - ehci2: usb@00a02000 { + ehci2: usb@a02000 { compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; reg = <0x00a02000 0x100>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 5>; - resets = <&usb_mod_clk 19>; + clocks = <&usb_clocks CLK_BUS_HCI2>; + resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; phy-names = "usb"; status = "disabled"; }; - ohci2: usb@00a02400 { + ohci2: usb@a02400 { compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; reg = <0x00a02400 0x100>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>; - resets = <&usb_mod_clk 19>; + clocks = <&usb_clocks CLK_BUS_HCI2>, + <&usb_clocks CLK_USB_OHCI2>; + resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; phy-names = "usb"; status = "disabled"; }; - usbphy3: phy@00a02800 { + usbphy3: phy@a02800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a02800 0x4>; - clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>, - <&usb_phy_clk 5>; - clock-names = "hsic_480M", "hsic_12M", "phy"; - resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>; - reset-names = "hsic", "phy"; + clocks = <&usb_clocks CLK_USB2_HSIC>, + <&usb_clocks CLK_USB_HSIC>, + <&usb_clocks CLK_USB2_PHY>; + clock-names = "hsic_480M", + "hsic_12M", + "phy"; + resets = <&usb_clocks RST_USB2_HSIC>, + <&usb_clocks RST_USB2_PHY>; + reset-names = "hsic", + "phy"; status = "disabled"; #phy-cells = <0>; }; - mmc0: mmc@01c0f000 { + usb_clocks: clock@a08000 { + compatible = "allwinner,sun9i-a80-usb-clks"; + reg = <0x00a08000 0x8>; + clocks = <&ccu CLK_BUS_USB>, <&osc24M>; + clock-names = "bus", "hosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cpucfg@1700000 { + compatible = "allwinner,sun9i-a80-cpucfg"; + reg = <0x01700000 0x100>; + }; + + mmc0: mmc@1c0f000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>, - <&mmc0_clk 1>, <&mmc0_clk 2>; + clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 0>; reset-names = "ahb"; @@ -556,11 +416,12 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>, - <&mmc1_clk 1>, <&mmc1_clk 2>; + clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 1>; reset-names = "ahb"; @@ -570,11 +431,12 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>, - <&mmc2_clk 1>, <&mmc2_clk 2>; + clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 2>; reset-names = "ahb"; @@ -584,11 +446,12 @@ #size-cells = <0>; }; - mmc3: mmc@01c12000 { + mmc3: mmc@1c12000 { compatible = "allwinner,sun9i-a80-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>, - <&mmc3_clk 1>, <&mmc3_clk 2>; + clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; resets = <&mmc_config_clk 3>; reset-names = "ahb"; @@ -598,12 +461,12 @@ #size-cells = <0>; }; - mmc_config_clk: clk@01c13000 { + mmc_config_clk: clk@1c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; - clocks = <&ahb0_gates 8>; + clocks = <&ccu CLK_BUS_MMC>; clock-names = "ahb"; - resets = <&ahb0_resets 8>; + resets = <&ccu RST_BUS_MMC>; reset-names = "ahb"; #clock-cells = <1>; #reset-cells = <1>; @@ -611,10 +474,10 @@ "mmc2_config", "mmc3_config"; }; - gic: interrupt-controller@01c41000 { + gic: interrupt-controller@1c41000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c41000 0x1000>, - <0x01c42000 0x1000>, + <0x01c42000 0x2000>, <0x01c44000 0x2000>, <0x01c46000 0x2000>; interrupt-controller; @@ -622,37 +485,435 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - ahb0_resets: reset@060005a0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a0 0x4>; + cci: cci@1c90000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c90000 0x1000>; + ranges = <0x0 0x01c90000 0x10000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1"; + reg = <0x9000 0x5000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + }; }; - ahb1_resets: reset@060005a4 { + de_clocks: clock@3000000 { + compatible = "allwinner,sun9i-a80-de-clks"; + reg = <0x03000000 0x30>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_SDRAM>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "dram", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a4 0x4>; }; - ahb2_resets: reset@060005a8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005a8 0x4>; + fe0: display-frontend@3100000 { + compatible = "allwinner,sun9i-a80-display-frontend"; + reg = <0x03100000 0x40000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>, + <&de_clocks CLK_DRAM_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_deu0: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu0_in_fe0>; + }; + }; + }; }; - apb0_resets: reset@060005b0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005b0 0x4>; + fe1: display-frontend@3140000 { + compatible = "allwinner,sun9i-a80-display-frontend"; + reg = <0x03140000 0x40000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>, + <&de_clocks CLK_DRAM_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_deu1: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu1_in_fe1>; + }; + }; + }; + }; + + be0: display-backend@3200000 { + compatible = "allwinner,sun9i-a80-display-backend"; + reg = <0x03200000 0x40000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>, + <&de_clocks CLK_DRAM_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_deu0: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu0_out_be0>; + }; + + be0_in_deu1: endpoint@1 { + reg = <1>; + remote-endpoint = <&deu1_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + be1: display-backend@3240000 { + compatible = "allwinner,sun9i-a80-display-backend"; + reg = <0x03240000 0x40000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>, + <&de_clocks CLK_DRAM_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_clocks RST_BE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_deu0: endpoint@0 { + reg = <0>; + remote-endpoint = <&deu0_out_be1>; + }; + + be1_in_deu1: endpoint@1 { + reg = <1>; + remote-endpoint = <&deu1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_in_be1>; + }; + }; + }; + }; + + deu0: deu@3300000 { + compatible = "allwinner,sun9i-a80-deu"; + reg = <0x03300000 0x40000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DEU0>, + <&de_clocks CLK_IEP_DEU0>, + <&de_clocks CLK_DRAM_DEU0>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DEU0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + deu0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + deu0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_deu0>; + }; + }; + + deu0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + deu0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_deu0>; + }; + + deu0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_deu0>; + }; + }; + }; + }; + + deu1: deu@3340000 { + compatible = "allwinner,sun9i-a80-deu"; + reg = <0x03340000 0x40000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DEU1>, + <&de_clocks CLK_IEP_DEU1>, + <&de_clocks CLK_DRAM_DEU1>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DEU1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + deu1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + deu1_in_fe1: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe1_out_deu1>; + }; + }; + + deu1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + deu1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_deu1>; + }; + + deu1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_deu1>; + }; + }; + }; + }; + + drc0: drc@3400000 { + compatible = "allwinner,sun9i-a80-drc"; + reg = <0x03400000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DRC0>, + <&de_clocks CLK_IEP_DRC0>, + <&de_clocks CLK_DRAM_DRC0>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DRC0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + + drc1: drc@3440000 { + compatible = "allwinner,sun9i-a80-drc"; + reg = <0x03440000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&de_clocks CLK_BUS_DRC1>, + <&de_clocks CLK_IEP_DRC1>, + <&de_clocks CLK_DRAM_DRC1>; + clock-names = "ahb", + "mod", + "ram"; + resets = <&de_clocks RST_DRC1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc1_in_be1: endpoint@0 { + reg = <0>; + remote-endpoint = <&be1_out_drc1>; + }; + }; + + drc1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc1_out_tcon1: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon1_in_drc1>; + }; + }; + }; + }; + + tcon0: lcd-controller@3c00000 { + compatible = "allwinner,sun9i-a80-tcon-lcd"; + reg = <0x03c00000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>; + clock-names = "ahb", "tcon-ch0"; + resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; + reset-names = "lcd", "edp"; + clock-output-names = "tcon0-pixel-clock"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; }; - apb1_resets: reset@060005b4 { + tcon1: lcd-controller@3c10000 { + compatible = "allwinner,sun9i-a80-tcon-tv"; + reg = <0x03c10000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>; + reset-names = "lcd", "edp"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_drc1: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + ccu: clock@6000000 { + compatible = "allwinner,sun9i-a80-ccu"; + reg = <0x06000000 0x800>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x060005b4 0x4>; }; - timer@06000c00 { + timer@6000c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x06000c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, @@ -665,13 +926,13 @@ clocks = <&osc24M>; }; - wdt: watchdog@06000ca0 { + wdt: watchdog@6000ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x06000ca0 0x20>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; }; - pio: pinctrl@06000800 { + pio: pinctrl@6000800 { compatible = "allwinner,sun9i-a80-pinctrl"; reg = <0x06000800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, @@ -679,195 +940,206 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 5>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #size-cells = <0>; #gpio-cells = <3>; - i2c3_pins_a: i2c3@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "i2c3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + i2c3_pins: i2c3-pins { + pins = "PG10", "PG11"; + function = "i2c3"; + }; + + lcd0_rgb888_pins: lcd0-rgb888-pins { + pins = "PD0", "PD1", "PD2", "PD3", + "PD4", "PD5", "PD6", "PD7", + "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD14", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; - mmc0_pins: mmc0 { - allwinner,pins = "PF0", "PF1" ,"PF2", "PF3", - "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1" ,"PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; - mmc1_pins: mmc1 { - allwinner,pins = "PG0", "PG1" ,"PG2", "PG3", + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1" ,"PG2", "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; - mmc2_8bit_pins: mmc2_8bit { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", - "PC13", "PC14", "PC15", - "PC16"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + mmc2_8bit_pins: mmc2-8bit-pins { + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart0_ph_pins: uart0-ph-pins { + pins = "PH12", "PH13"; + function = "uart0"; }; - uart4_pins_a: uart4@0 { - allwinner,pins = "PG12", "PG13", "PG14", "PG15"; - allwinner,function = "uart4"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart4_pins: uart4-pins { + pins = "PG12", "PG13", "PG14", "PG15"; + function = "uart4"; }; }; - uart0: serial@07000000 { + uart0: serial@7000000 { compatible = "snps,dw-apb-uart"; reg = <0x07000000 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 16>; - resets = <&apb1_resets 16>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; - uart1: serial@07000400 { + uart1: serial@7000400 { compatible = "snps,dw-apb-uart"; reg = <0x07000400 0x400>; interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 17>; - resets = <&apb1_resets 17>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; - uart2: serial@07000800 { + uart2: serial@7000800 { compatible = "snps,dw-apb-uart"; reg = <0x07000800 0x400>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 18>; - resets = <&apb1_resets 18>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; - uart3: serial@07000c00 { + uart3: serial@7000c00 { compatible = "snps,dw-apb-uart"; reg = <0x07000c00 0x400>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 19>; - resets = <&apb1_resets 19>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; - uart4: serial@07001000 { + uart4: serial@7001000 { compatible = "snps,dw-apb-uart"; reg = <0x07001000 0x400>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 20>; - resets = <&apb1_resets 20>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; status = "disabled"; }; - uart5: serial@07001400 { + uart5: serial@7001400 { compatible = "snps,dw-apb-uart"; reg = <0x07001400 0x400>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb1_gates 21>; - resets = <&apb1_resets 21>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; status = "disabled"; }; - i2c0: i2c@07002800 { + i2c0: i2c@7002800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002800 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 0>; - resets = <&apb1_resets 0>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c1: i2c@07002c00 { + i2c1: i2c@7002c00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07002c00 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 1>; - resets = <&apb1_resets 1>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c2: i2c@07003000 { + i2c2: i2c@7003000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003000 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 2>; - resets = <&apb1_resets 2>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c3: i2c@07003400 { + i2c3: i2c@7003400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003400 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 3>; - resets = <&apb1_resets 3>; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c4: i2c@07003800 { + i2c4: i2c@7003800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x07003800 0x400>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 4>; - resets = <&apb1_resets 4>; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - r_wdt: watchdog@08001000 { + r_wdt: watchdog@8001000 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x08001000 0x20>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; }; - apbs_rst: reset@080014b0 { + prcm@8001400 { + compatible = "allwinner,sun9i-a80-prcm"; + reg = <0x08001400 0x200>; + }; + + apbs_rst: reset@80014b0 { reg = <0x080014b0 0x4>; compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; - nmi_intc: interrupt-controller@080015a0 { + nmi_intc: interrupt-controller@80015a0 { compatible = "allwinner,sun9i-a80-nmi"; interrupt-controller; #interrupt-cells = <2>; @@ -875,7 +1147,7 @@ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; - r_ir: ir@08002000 { + r_ir: ir@8002000 { compatible = "allwinner,sun5i-a13-ir"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; @@ -887,7 +1159,7 @@ status = "disabled"; }; - r_uart: serial@08002800 { + r_uart: serial@8002800 { compatible = "snps,dw-apb-uart"; reg = <0x08002800 0x400>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -898,35 +1170,33 @@ status = "disabled"; }; - r_pio: pinctrl@08002c00 { + r_pio: pinctrl@8002c00 { compatible = "allwinner,sun9i-a80-r-pinctrl"; reg = <0x08002c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apbs_gates 0>; + clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apbs_rst 0>; gpio-controller; interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; + #interrupt-cells = <3>; #gpio-cells = <3>; - r_ir_pins: r_ir { - allwinner,pins = "PL6"; - allwinner,function = "s_cir_rx"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + r_ir_pins: r-ir-pins { + pins = "PL6"; + function = "s_cir_rx"; }; - r_rsb_pins: r_rsb { - allwinner,pins = "PN0", "PN1"; - allwinner,function = "s_rsb"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + r_rsb_pins: r-rsb-pins { + pins = "PN0", "PN1"; + function = "s_rsb"; + drive-strength = <20>; + bias-pull-up; }; }; - r_rsb: i2c@08003400 { + r_rsb: i2c@8003400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x08003400 0x400>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/include/asm/arch-sunxi/ccu.h b/arch/arm/include/asm/arch-sunxi/ccu.h new file mode 100644 index 0000000000..5dd97ab227 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/ccu.h @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#ifndef _ASM_ARCH_CCU_H +#define _ASM_ARCH_CCU_H + +/** + * enum ccu_flags - ccu clock/reset flags + * + * @CCU_CLK_F_IS_VALID: is given clock gate is valid? + * @CCU_RST_F_IS_VALID: is given reset control is valid? + */ +enum ccu_flags { + CCU_CLK_F_IS_VALID = BIT(0), + CCU_RST_F_IS_VALID = BIT(1), +}; + +/** + * struct ccu_clk_gate - ccu clock gate + * @off: gate offset + * @bit: gate bit + * @flags: ccu clock gate flags + */ +struct ccu_clk_gate { + u16 off; + u32 bit; + enum ccu_flags flags; +}; + +#define GATE(_off, _bit) { \ + .off = _off, \ + .bit = _bit, \ + .flags = CCU_CLK_F_IS_VALID, \ +} + +/** + * struct ccu_reset - ccu reset + * @off: reset offset + * @bit: reset bit + * @flags: ccu reset control flags + */ +struct ccu_reset { + u16 off; + u32 bit; + enum ccu_flags flags; +}; + +#define RESET(_off, _bit) { \ + .off = _off, \ + .bit = _bit, \ + .flags = CCU_RST_F_IS_VALID, \ +} + +/** + * struct ccu_desc - clock control unit descriptor + * + * @gates: clock gates + * @resets: reset unit + */ +struct ccu_desc { + const struct ccu_clk_gate *gates; + const struct ccu_reset *resets; +}; + +/** + * struct ccu_priv - sunxi clock control unit + * + * @base: base address + * @desc: ccu descriptor + */ +struct ccu_priv { + void *base; + const struct ccu_desc *desc; +}; + +/** + * sunxi_clk_probe - common sunxi clock probe + * @dev: clock device + */ +int sunxi_clk_probe(struct udevice *dev); + +extern struct clk_ops sunxi_clk_ops; + +/** + * sunxi_reset_bind() - reset binding + * + * @dev: reset device + * @count: reset count + * @return 0 success, or error value + */ +int sunxi_reset_bind(struct udevice *dev, ulong count); + +#endif /* _ASM_ARCH_CCU_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 2daf23f6f5..40a3f845d0 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -176,6 +176,7 @@ enum sunxi_gpio_number { #define SUN5I_GPE_SDC2 3 #define SUN8I_GPE_TWI2 3 +#define SUN50I_GPE_TWI2 3 #define SUNXI_GPF_SDC0 2 #define SUNXI_GPF_UART0 4 @@ -193,8 +194,10 @@ enum sunxi_gpio_number { #define SUN4I_GPH_SDC1 5 #define SUN6I_GPH_TWI0 2 #define SUN8I_GPH_TWI0 2 +#define SUN50I_GPH_TWI0 2 #define SUN6I_GPH_TWI1 2 #define SUN8I_GPH_TWI1 2 +#define SUN50I_GPH_TWI1 2 #define SUN6I_GPH_TWI2 2 #define SUN6I_GPH_UART0 2 #define SUN9I_GPH_UART0 2 diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 9b6e0c4c21..608a86be49 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -182,6 +182,11 @@ M: Chen-Yu Tsai <wens@csie.org> S: Maintained F: configs/Cubietruck_plus_defconfig +EMLID NEUTIS N5 DEV BOARD +M: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> +S: Maintained +F: configs/emlid_neutis_n5_devboard_defconfig + GEMEI-G9 TABLET M: Priit Laes <plaes@plaes.org> S: Maintained diff --git a/board/sunxi/board.c b/board/sunxi/board.c index f022f365e9..ad14837291 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -98,6 +98,10 @@ void i2c_init_board(void) sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0); sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0); clock_twi_onoff(0, 1); +#elif defined(CONFIG_MACH_SUN50I) + sunxi_gpio_set_cfgpin(SUNXI_GPH(0), SUN50I_GPH_TWI0); + sunxi_gpio_set_cfgpin(SUNXI_GPH(1), SUN50I_GPH_TWI0); + clock_twi_onoff(0, 1); #endif #endif @@ -120,6 +124,10 @@ void i2c_init_board(void) sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1); sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1); clock_twi_onoff(1, 1); +#elif defined(CONFIG_MACH_SUN50I) + sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN50I_GPH_TWI1); + sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN50I_GPH_TWI1); + clock_twi_onoff(1, 1); #endif #endif @@ -142,6 +150,10 @@ void i2c_init_board(void) sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2); sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2); clock_twi_onoff(2, 1); +#elif defined(CONFIG_MACH_SUN50I) + sunxi_gpio_set_cfgpin(SUNXI_GPE(14), SUN50I_GPE_TWI2); + sunxi_gpio_set_cfgpin(SUNXI_GPE(15), SUN50I_GPE_TWI2); + clock_twi_onoff(2, 1); #endif #endif diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 55134a9002..9b8891eed5 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -22,5 +22,6 @@ CONFIG_SUN4I_EMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index d0fb4d7860..fcf4890c3a 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -18,5 +18,6 @@ CONFIG_MII=y CONFIG_SUN4I_EMAC=y CONFIG_AXP152_POWER=y CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 88374551e3..aedb0c3f0a 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -19,5 +19,6 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro" CONFIG_SUNXI_NO_PMIC=y CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 7b836ddf9c..eb76bf8fea 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -26,6 +26,7 @@ CONFIG_DFU_RAM=y CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig index 3e9f57446c..d74afd5959 100644 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -31,6 +31,7 @@ CONFIG_AXP_ALDO3_VOLT_SLOPE_08=y CONFIG_AXP_ALDO3_INRUSH_QUIRK=y CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index e7ca33576a..a10cc0bd97 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -30,6 +30,7 @@ CONFIG_AXP_ALDO3_VOLT_SLOPE_08=y CONFIG_AXP_ALDO3_INRUSH_QUIRK=y CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index 91f5210762..9e13792f1a 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -21,5 +21,6 @@ CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A20-OLinuXino_MICRO-eMMC_defconfig b/configs/A20-OLinuXino_MICRO-eMMC_defconfig index 20964c5546..73e6f7c4e0 100644 --- a/configs/A20-OLinuXino_MICRO-eMMC_defconfig +++ b/configs/A20-OLinuXino_MICRO-eMMC_defconfig @@ -24,5 +24,6 @@ CONFIG_SUN7I_GMAC_FORCE_TXERR=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index cf9bf3347b..bd68511d6b 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -25,5 +25,6 @@ CONFIG_SUN7I_GMAC_FORCE_TXERR=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index a31f96ce14..c38025a9c2 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -26,5 +26,6 @@ CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig index c9e9475215..778c2ee72b 100644 --- a/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig +++ b/configs/A20-Olimex-SOM204-EVB-eMMC_defconfig @@ -30,6 +30,7 @@ CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/A20-Olimex-SOM204-EVB_defconfig b/configs/A20-Olimex-SOM204-EVB_defconfig index 1181832b2e..e853c9301c 100644 --- a/configs/A20-Olimex-SOM204-EVB_defconfig +++ b/configs/A20-Olimex-SOM204-EVB_defconfig @@ -29,6 +29,7 @@ CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO3_VOLT=2800 CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig index a693cfdd41..c2a681c569 100644 --- a/configs/Auxtek-T003_defconfig +++ b/configs/Auxtek-T003_defconfig @@ -15,5 +15,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003" CONFIG_AXP152_POWER=y CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index 5c88b2bec0..bc5fc8cee8 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -13,5 +13,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004" CONFIG_AXP152_POWER=y CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 41cb9fc225..67daec6d7f 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -21,5 +21,6 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Bananapi_m2m_defconfig b/configs/Bananapi_m2m_defconfig index 990c791b76..c8dfa7d51f 100644 --- a/configs/Bananapi_m2m_defconfig +++ b/configs/Bananapi_m2m_defconfig @@ -15,6 +15,7 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-bananapi-m2m" CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_FUNCTION_MASS_STORAGE=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 41fc6a6eee..cd5d8b6cdd 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -24,5 +24,6 @@ CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO4_VOLT=2500 CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig index ffdffcdb06..67fe58b21f 100644 --- a/configs/CHIP_defconfig +++ b/configs/CHIP_defconfig @@ -17,6 +17,7 @@ CONFIG_DFU_RAM=y CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_AXP_ALDO4_VOLT=3300 CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig index c607adb65b..618f113ff6 100644 --- a/configs/CHIP_pro_defconfig +++ b/configs/CHIP_pro_defconfig @@ -22,6 +22,7 @@ CONFIG_SYS_NAND_OOBSIZE=0x100 CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_AXP_ALDO4_VOLT=3300 CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index ffc64d6aa4..9036ffc96a 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -16,6 +16,7 @@ CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 77c7e9ee29..cb65647c7a 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -26,5 +26,6 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO1_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 366f55b815..7fe5b83fa2 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -18,5 +18,6 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index efc3e2567a..ccb612a9c7 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -17,5 +17,6 @@ CONFIG_SCSI_AHCI=y CONFIG_MII=y CONFIG_SUN4I_EMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 86bef3d54f..3beb515075 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -28,6 +28,7 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig index 2f43bbd947..cecb428b02 100644 --- a/configs/Cubietruck_plus_defconfig +++ b/configs/Cubietruck_plus_defconfig @@ -23,6 +23,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus" CONFIG_AXP_DLDO3_VOLT=2500 CONFIG_AXP_DLDO4_VOLT=3300 CONFIG_AXP_FLDO1_VOLT=1200 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index b3e9d0a530..0f0b1c2251 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -18,5 +18,6 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO1_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Itead_Ibox_A20_defconfig b/configs/Itead_Ibox_A20_defconfig index 721bc87677..784c4de384 100644 --- a/configs/Itead_Ibox_A20_defconfig +++ b/configs/Itead_Ibox_A20_defconfig @@ -18,5 +18,6 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index 9eb3c08cb8..88f8a1577b 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -23,5 +23,6 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig index 09aae78205..72d9b03929 100644 --- a/configs/Linksprite_pcDuino3_Nano_defconfig +++ b/configs/Linksprite_pcDuino3_Nano_defconfig @@ -21,5 +21,6 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index 00a49d1077..9156f132d1 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -20,5 +20,6 @@ CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y CONFIG_DM_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index 81dbb72c75..21cfea133d 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -13,5 +13,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" CONFIG_MII=y CONFIG_SUN4I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig index f634ac894a..367a164554 100644 --- a/configs/MK808C_defconfig +++ b/configs/MK808C_defconfig @@ -10,5 +10,6 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c" +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index ae7c26615f..c40e452aa4 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -14,5 +14,6 @@ CONFIG_MII=y CONFIG_SUN4I_EMAC=y CONFIG_SUNXI_NO_PMIC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index a2c613521e..feabbbf244 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -19,6 +19,7 @@ CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_AXP_DLDO4_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 49672092e2..9375c5d424 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -17,5 +17,6 @@ CONFIG_SCSI_AHCI=y CONFIG_MII=y CONFIG_SUN4I_EMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index aac4fa12b2..eecf89b76e 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -18,5 +18,6 @@ CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_AXP_DLDO4_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index acd98bc960..9738f8ba81 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -17,5 +17,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3" CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig index e473da772e..c76bc9f91f 100644 --- a/configs/Mele_M5_defconfig +++ b/configs/Mele_M5_defconfig @@ -19,5 +19,6 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index 63bf3fd5b2..d3136c67cb 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -18,5 +18,6 @@ CONFIG_AXP_DCDC1_VOLT=3300 CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_AXP_DLDO4_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 161feea519..54b40d5696 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -12,5 +12,6 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index 3ea1d03d96..dae821a8d2 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -23,5 +23,6 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index 737c7a958e..e1cbbbd4e9 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -25,5 +25,6 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig index dbc8c08e57..efa3b86b1f 100644 --- a/configs/Sinlinx_SinA31s_defconfig +++ b/configs/Sinlinx_SinA31s_defconfig @@ -19,5 +19,6 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index df078c4b64..b92d62117c 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_DFU=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-sinlinx-sina33" CONFIG_DFU_RAM=y CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Sinovoip_BPI_M2_Plus_defconfig b/configs/Sinovoip_BPI_M2_Plus_defconfig index 35c4718e2d..c2025ee0a4 100644 --- a/configs/Sinovoip_BPI_M2_Plus_defconfig +++ b/configs/Sinovoip_BPI_M2_Plus_defconfig @@ -14,6 +14,7 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig index 83ef4b4dce..fd69ac5170 100644 --- a/configs/Sinovoip_BPI_M2_defconfig +++ b/configs/Sinovoip_BPI_M2_defconfig @@ -18,5 +18,6 @@ CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_AXP_ALDO2_VOLT=1800 CONFIG_AXP_DLDO1_VOLT=3000 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig index 9f04731543..ec59feb4e4 100644 --- a/configs/Sinovoip_BPI_M3_defconfig +++ b/configs/Sinovoip_BPI_M3_defconfig @@ -24,6 +24,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3" CONFIG_AXP_DCDC5_VOLT=1200 CONFIG_AXP_DLDO3_VOLT=2500 CONFIG_AXP_SW_ON=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig index 58c65b72bb..a2351dc925 100644 --- a/configs/Wexler_TAB7200_defconfig +++ b/configs/Wexler_TAB7200_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200" +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig index 1fc7a4dbb0..cc8ba5810c 100644 --- a/configs/Wits_Pro_A20_DKT_defconfig +++ b/configs/Wits_Pro_A20_DKT_defconfig @@ -23,5 +23,6 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/Wobo_i5_defconfig b/configs/Wobo_i5_defconfig index a0dca6aa67..17f03c8579 100644 --- a/configs/Wobo_i5_defconfig +++ b/configs/Wobo_i5_defconfig @@ -15,5 +15,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-wobo-i5" CONFIG_AXP_ALDO3_VOLT=3300 CONFIG_AXP_ALDO4_VOLT=3300 CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/a64-olinuxino_defconfig b/configs/a64-olinuxino_defconfig index 01fcb86599..94ac94c6ab 100644 --- a/configs/a64-olinuxino_defconfig +++ b/configs/a64-olinuxino_defconfig @@ -11,5 +11,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index 846fab2f5f..76a980e60f 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -16,6 +16,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox" CONFIG_MII=y CONFIG_SUN4I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/bananapi_m1_plus_defconfig b/configs/bananapi_m1_plus_defconfig index 7286d2160b..46baf346c5 100644 --- a/configs/bananapi_m1_plus_defconfig +++ b/configs/bananapi_m1_plus_defconfig @@ -21,4 +21,5 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_SCSI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig index aa0ad3c5f4..7dc768ff9f 100644 --- a/configs/bananapi_m64_defconfig +++ b/configs/bananapi_m64_defconfig @@ -12,6 +12,7 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/emlid_neutis_n5_devboard_defconfig b/configs/emlid_neutis_n5_devboard_defconfig new file mode 100644 index 0000000000..3df0ca13f0 --- /dev/null +++ b/configs/emlid_neutis_n5_devboard_defconfig @@ -0,0 +1,13 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I_H5=y +CONFIG_DRAM_CLK=408 +CONFIG_DRAM_ZQ=3881977 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-emlid-neutis-n5-devboard" diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 4c88285e24..0049982407 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -23,6 +23,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1" CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_CONS_INDEX=5 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/h8_homlet_v2_defconfig b/configs/h8_homlet_v2_defconfig index 7aad6f0cdf..6e1cc00357 100644 --- a/configs/h8_homlet_v2_defconfig +++ b/configs/h8_homlet_v2_defconfig @@ -16,6 +16,7 @@ CONFIG_CONSOLE_MUX=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-allwinner-h8homlet-v2" CONFIG_AXP_DLDO4_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index 4b3a8a3d50..fea490d74d 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -15,5 +15,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox" CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/icnova-a20-swac_defconfig b/configs/icnova-a20-swac_defconfig index 07c89a41e7..99cc7e889f 100644 --- a/configs/icnova-a20-swac_defconfig +++ b/configs/icnova-a20-swac_defconfig @@ -22,5 +22,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-icnova-swac" CONFIG_ETH_DESIGNWARE=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig index 79e594bc15..b5b94d9c95 100644 --- a/configs/inet1_defconfig +++ b/configs/inet1_defconfig @@ -19,6 +19,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet1" +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/inet_q972_defconfig b/configs/inet_q972_defconfig index d15f71ae7a..7f3d04db6d 100644 --- a/configs/inet_q972_defconfig +++ b/configs/inet_q972_defconfig @@ -20,6 +20,7 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-inet-q972" CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index ce485376f3..e6f90c09f2 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -15,6 +15,7 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" CONFIG_MII=y CONFIG_SUN4I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/libretech_all_h3_cc_h2_plus_defconfig b/configs/libretech_all_h3_cc_h2_plus_defconfig index 2c7a3ff9ef..9c2e28f1e8 100644 --- a/configs/libretech_all_h3_cc_h2_plus_defconfig +++ b/configs/libretech_all_h3_cc_h2_plus_defconfig @@ -13,5 +13,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-libretech-all-h3-cc" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/libretech_all_h3_cc_h3_defconfig b/configs/libretech_all_h3_cc_h3_defconfig index bd2c7083b0..9130a5980b 100644 --- a/configs/libretech_all_h3_cc_h3_defconfig +++ b/configs/libretech_all_h3_cc_h3_defconfig @@ -13,5 +13,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-libretech-all-h3-cc" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/libretech_all_h3_cc_h5_defconfig b/configs/libretech_all_h3_cc_h5_defconfig index 001f53d0fe..eb0d5dc7af 100644 --- a/configs/libretech_all_h3_cc_h5_defconfig +++ b/configs/libretech_all_h3_cc_h5_defconfig @@ -13,5 +13,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-cc" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 9ebb55c678..55d06497c9 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -18,5 +18,6 @@ CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y CONFIG_AXP_ALDO1_VOLT=3300 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig index 3fba55e70f..5a0b502145 100644 --- a/configs/mk802_a10s_defconfig +++ b/configs/mk802_a10s_defconfig @@ -14,5 +14,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802" CONFIG_AXP152_POWER=y CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 1b59348f94..14f8feee20 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -10,5 +10,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802" CONFIG_SUNXI_NO_PMIC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index 7a3f3d1f74..abd261db2f 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -9,5 +9,6 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii" +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/nanopi_a64_defconfig b/configs/nanopi_a64_defconfig index cd3b59f2dc..4dfd36ee3c 100644 --- a/configs/nanopi_a64_defconfig +++ b/configs/nanopi_a64_defconfig @@ -10,5 +10,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-nanopi-a64" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/nanopi_m1_defconfig b/configs/nanopi_m1_defconfig index bf4e874b12..c8efce81e4 100644 --- a/configs/nanopi_m1_defconfig +++ b/configs/nanopi_m1_defconfig @@ -11,5 +11,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-m1" +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/nanopi_m1_plus_defconfig b/configs/nanopi_m1_plus_defconfig index 66e90916f7..79b1c6913e 100644 --- a/configs/nanopi_m1_plus_defconfig +++ b/configs/nanopi_m1_plus_defconfig @@ -13,5 +13,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-m1-plus" +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/nanopi_neo2_defconfig b/configs/nanopi_neo2_defconfig index ee693be1a8..8892f6cd83 100644 --- a/configs/nanopi_neo2_defconfig +++ b/configs/nanopi_neo2_defconfig @@ -11,5 +11,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo2" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig index 8c362fa885..149530416b 100644 --- a/configs/nanopi_neo_air_defconfig +++ b/configs/nanopi_neo_air_defconfig @@ -13,5 +13,6 @@ CONFIG_CONSOLE_MUX=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air" +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig index ffb854b4b8..b963a28ecc 100644 --- a/configs/nanopi_neo_defconfig +++ b/configs/nanopi_neo_defconfig @@ -14,5 +14,6 @@ CONFIG_CONSOLE_MUX=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig index 331dc6a8f7..efb1737a75 100644 --- a/configs/nanopi_neo_plus2_defconfig +++ b/configs/nanopi_neo_plus2_defconfig @@ -13,4 +13,5 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo-plus2" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_2_defconfig b/configs/orangepi_2_defconfig index b86c0ab380..3ad13cb307 100644 --- a/configs/orangepi_2_defconfig +++ b/configs/orangepi_2_defconfig @@ -16,5 +16,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-2" CONFIG_SUN8I_EMAC=y CONFIG_SY8106A_POWER=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_lite_defconfig b/configs/orangepi_lite_defconfig index de08a8a2c6..e30df9be26 100644 --- a/configs/orangepi_lite_defconfig +++ b/configs/orangepi_lite_defconfig @@ -11,5 +11,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-lite" +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_one_defconfig b/configs/orangepi_one_defconfig index 003f2cc7cb..346a55f1d1 100644 --- a/configs/orangepi_one_defconfig +++ b/configs/orangepi_one_defconfig @@ -12,5 +12,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-one" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig index 7f7e6d3264..a74fedda3f 100644 --- a/configs/orangepi_pc2_defconfig +++ b/configs/orangepi_pc2_defconfig @@ -13,6 +13,7 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-pc2" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig index fd41e1a45b..14fcb66113 100644 --- a/configs/orangepi_pc_defconfig +++ b/configs/orangepi_pc_defconfig @@ -14,5 +14,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-pc" CONFIG_SUN8I_EMAC=y CONFIG_SY8106A_POWER=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_pc_plus_defconfig b/configs/orangepi_pc_plus_defconfig index 1f0bf73149..0e7b4d3b1b 100644 --- a/configs/orangepi_pc_plus_defconfig +++ b/configs/orangepi_pc_plus_defconfig @@ -15,5 +15,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-pc-plus" CONFIG_SUN8I_EMAC=y CONFIG_SY8106A_POWER=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_plus2e_defconfig b/configs/orangepi_plus2e_defconfig index 9baccdef78..3e79c848c3 100644 --- a/configs/orangepi_plus2e_defconfig +++ b/configs/orangepi_plus2e_defconfig @@ -16,5 +16,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus2e" CONFIG_SUN8I_EMAC=y CONFIG_SY8106A_POWER=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig index 0588799b59..26bd9c439a 100644 --- a/configs/orangepi_plus_defconfig +++ b/configs/orangepi_plus_defconfig @@ -18,5 +18,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus" CONFIG_SUN8I_EMAC=y CONFIG_SY8106A_POWER=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig index 7e10ebe796..d2429b767b 100644 --- a/configs/orangepi_prime_defconfig +++ b/configs/orangepi_prime_defconfig @@ -11,6 +11,7 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-prime" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_r1_defconfig b/configs/orangepi_r1_defconfig index f587bec2ec..cd3355153c 100644 --- a/configs/orangepi_r1_defconfig +++ b/configs/orangepi_r1_defconfig @@ -13,5 +13,6 @@ CONFIG_CONSOLE_MUX=y # CONFIG_CMD_FLASH is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig index ab889ea8f5..78c55326c6 100644 --- a/configs/orangepi_win_defconfig +++ b/configs/orangepi_win_defconfig @@ -11,5 +11,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-orangepi-win" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig index 0da9c65093..e5a4c1d9fc 100644 --- a/configs/orangepi_zero_defconfig +++ b/configs/orangepi_zero_defconfig @@ -13,5 +13,6 @@ CONFIG_CONSOLE_MUX=y # CONFIG_CMD_FLASH is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-zero" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig index 3c6ee03a53..7ae922774c 100644 --- a/configs/orangepi_zero_plus2_defconfig +++ b/configs/orangepi_zero_plus2_defconfig @@ -13,5 +13,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus2" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/orangepi_zero_plus_defconfig b/configs/orangepi_zero_plus_defconfig index 5d783c5981..74133fa03b 100644 --- a/configs/orangepi_zero_plus_defconfig +++ b/configs/orangepi_zero_plus_defconfig @@ -13,5 +13,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/parrot_r16_defconfig b/configs/parrot_r16_defconfig index a6071612c4..80c1bf1fbe 100644 --- a/configs/parrot_r16_defconfig +++ b/configs/parrot_r16_defconfig @@ -18,6 +18,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_DEFAULT_DEVICE_TREE="sun8i-r16-parrot" CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_CONS_INDEX=5 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index a5b87b9063..ded4d134f1 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -14,5 +14,6 @@ CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" CONFIG_PHY_REALTEK=y CONFIG_RTL8211E_PINE64_GIGABIT_FIX=y CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig index 5294dbd2eb..935644dfaf 100644 --- a/configs/pinebook_defconfig +++ b/configs/pinebook_defconfig @@ -15,6 +15,7 @@ CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_PWM=y CONFIG_PWM_SUNXI=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y # CONFIG_USB_GADGET is not set diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index 9c797c5512..d993b5d256 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -13,5 +13,6 @@ CONFIG_SPL_I2C_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle" CONFIG_AXP152_POWER=y CONFIG_CONS_INDEX=2 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/sopine_baseboard_defconfig b/configs/sopine_baseboard_defconfig index 9ede081c08..0a189fc03d 100644 --- a/configs/sopine_baseboard_defconfig +++ b/configs/sopine_baseboard_defconfig @@ -16,5 +16,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-sopine-baseboard" CONFIG_SUN8I_EMAC=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig index 70c4072e22..563275b65f 100644 --- a/configs/sun8i_a23_evb_defconfig +++ b/configs/sun8i_a23_evb_defconfig @@ -14,5 +14,6 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-evb" CONFIG_CONS_INDEX=5 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index e07d7c7d9e..06a07df051 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -16,5 +16,6 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9" +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/configs/tbs_a711_defconfig b/configs/tbs_a711_defconfig index b2bcf3be57..103ce9be46 100644 --- a/configs/tbs_a711_defconfig +++ b/configs/tbs_a711_defconfig @@ -19,6 +19,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-tbs-a711" CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_AXP_DCDC5_VOLT=1200 +CONFIG_USB_OHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_USB_FUNCTION_MASS_STORAGE=y diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index eadf7f8250..51c931b906 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -104,6 +104,7 @@ source "drivers/clk/imx/Kconfig" source "drivers/clk/mvebu/Kconfig" source "drivers/clk/owl/Kconfig" source "drivers/clk/renesas/Kconfig" +source "drivers/clk/sunxi/Kconfig" source "drivers/clk/tegra/Kconfig" source "drivers/clk/uniphier/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 9acbb1a650..6a4ff9143b 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_CLK_HSDK) += clk-hsdk-cgu.o obj-$(CONFIG_CLK_MPC83XX) += mpc83xx_clk.o obj-$(CONFIG_CLK_OWL) += owl/ obj-$(CONFIG_CLK_RENESAS) += renesas/ +obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_CLK_STM32F) += clk_stm32f.o obj-$(CONFIG_CLK_STM32MP1) += clk_stm32mp1.o obj-$(CONFIG_CLK_UNIPHIER) += uniphier/ diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig new file mode 100644 index 0000000000..5ff101b993 --- /dev/null +++ b/drivers/clk/sunxi/Kconfig @@ -0,0 +1,89 @@ +config CLK_SUNXI + bool "Clock support for Allwinner SoCs" + depends on CLK && ARCH_SUNXI + select DM_RESET + default y + help + This enables support for common clock driver API on Allwinner + SoCs. + +if CLK_SUNXI + +config CLK_SUN4I_A10 + bool "Clock driver for Allwinner A10/A20" + default MACH_SUN4I || MACH_SUN7I + help + This enables common clock driver support for platforms based + on Allwinner A10/A20 SoC. + +config CLK_SUN5I_A10S + bool "Clock driver for Allwinner A10s/A13" + default MACH_SUN5I + help + This enables common clock driver support for platforms based + on Allwinner A10s/A13 SoC. + +config CLK_SUN6I_A31 + bool "Clock driver for Allwinner A31/A31s" + default MACH_SUN6I + help + This enables common clock driver support for platforms based + on Allwinner A31/A31s SoC. + +config CLK_SUN8I_A23 + bool "Clock driver for Allwinner A23/A33" + default MACH_SUN8I_A23 || MACH_SUN8I_A33 + help + This enables common clock driver support for platforms based + on Allwinner A23/A33 SoC. + +config CLK_SUN8I_A83T + bool "Clock driver for Allwinner A83T" + default MACH_SUN8I_A83T + help + This enables common clock driver support for platforms based + on Allwinner A83T SoC. + +config CLK_SUN8I_R40 + bool "Clock driver for Allwinner R40" + default MACH_SUN8I_R40 + help + This enables common clock driver support for platforms based + on Allwinner R40 SoC. + +config CLK_SUN8I_V3S + bool "Clock driver for Allwinner V3S" + default MACH_SUN8I_V3S + help + This enables common clock driver support for platforms based + on Allwinner V3S SoC. + +config CLK_SUN9I_A80 + bool "Clock driver for Allwinner A80" + default MACH_SUN9I + help + This enables common clock driver support for platforms based + on Allwinner A80 SoC. + +config CLK_SUN8I_H3 + bool "Clock driver for Allwinner H3/H5" + default MACH_SUNXI_H3_H5 + help + This enables common clock driver support for platforms based + on Allwinner H3/H5 SoC. + +config CLK_SUN50I_H6 + bool "Clock driver for Allwinner H6" + default MACH_SUN50I_H6 + help + This enables common clock driver support for platforms based + on Allwinner H6 SoC. + +config CLK_SUN50I_A64 + bool "Clock driver for Allwinner A64" + default MACH_SUN50I + help + This enables common clock driver support for platforms based + on Allwinner A64 SoC. + +endif # CLK_SUNXI diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile new file mode 100644 index 0000000000..36fb2aeb56 --- /dev/null +++ b/drivers/clk/sunxi/Makefile @@ -0,0 +1,19 @@ +# +# Copyright (C) 2018 Amarula Solutions. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_CLK_SUNXI) += clk_sunxi.o + +obj-$(CONFIG_CLK_SUN4I_A10) += clk_a10.o +obj-$(CONFIG_CLK_SUN5I_A10S) += clk_a10s.o +obj-$(CONFIG_CLK_SUN6I_A31) += clk_a31.o +obj-$(CONFIG_CLK_SUN8I_A23) += clk_a23.o +obj-$(CONFIG_CLK_SUN8I_A83T) += clk_a83t.o +obj-$(CONFIG_CLK_SUN8I_R40) += clk_r40.o +obj-$(CONFIG_CLK_SUN8I_V3S) += clk_v3s.o +obj-$(CONFIG_CLK_SUN9I_A80) += clk_a80.o +obj-$(CONFIG_CLK_SUN8I_H3) += clk_h3.o +obj-$(CONFIG_CLK_SUN50I_H6) += clk_h6.o +obj-$(CONFIG_CLK_SUN50I_A64) += clk_a64.o diff --git a/drivers/clk/sunxi/clk_a10.c b/drivers/clk/sunxi/clk_a10.c new file mode 100644 index 0000000000..b00f51af8b --- /dev/null +++ b/drivers/clk/sunxi/clk_a10.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun4i-a10-ccu.h> +#include <dt-bindings/reset/sun4i-a10-ccu.h> + +static struct ccu_clk_gate a10_gates[] = { + [CLK_AHB_OTG] = GATE(0x060, BIT(0)), + [CLK_AHB_EHCI0] = GATE(0x060, BIT(1)), + [CLK_AHB_OHCI0] = GATE(0x060, BIT(2)), + [CLK_AHB_EHCI1] = GATE(0x060, BIT(3)), + [CLK_AHB_OHCI1] = GATE(0x060, BIT(4)), + + [CLK_APB1_UART0] = GATE(0x06c, BIT(16)), + [CLK_APB1_UART1] = GATE(0x06c, BIT(17)), + [CLK_APB1_UART2] = GATE(0x06c, BIT(18)), + [CLK_APB1_UART3] = GATE(0x06c, BIT(19)), + [CLK_APB1_UART4] = GATE(0x06c, BIT(20)), + [CLK_APB1_UART5] = GATE(0x06c, BIT(21)), + [CLK_APB1_UART6] = GATE(0x06c, BIT(22)), + [CLK_APB1_UART7] = GATE(0x06c, BIT(23)), + + [CLK_USB_OHCI0] = GATE(0x0cc, BIT(6)), + [CLK_USB_OHCI1] = GATE(0x0cc, BIT(7)), + [CLK_USB_PHY] = GATE(0x0cc, BIT(8)), +}; + +static struct ccu_reset a10_resets[] = { + [RST_USB_PHY0] = RESET(0x0cc, BIT(0)), + [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), + [RST_USB_PHY2] = RESET(0x0cc, BIT(2)), +}; + +static const struct ccu_desc a10_ccu_desc = { + .gates = a10_gates, + .resets = a10_resets, +}; + +static int a10_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(a10_resets)); +} + +static const struct udevice_id a10_ccu_ids[] = { + { .compatible = "allwinner,sun4i-a10-ccu", + .data = (ulong)&a10_ccu_desc }, + { .compatible = "allwinner,sun7i-a20-ccu", + .data = (ulong)&a10_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun4i_a10) = { + .name = "sun4i_a10_ccu", + .id = UCLASS_CLK, + .of_match = a10_ccu_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = a10_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_a10s.c b/drivers/clk/sunxi/clk_a10s.c new file mode 100644 index 0000000000..aa904ce067 --- /dev/null +++ b/drivers/clk/sunxi/clk_a10s.c @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun5i-ccu.h> +#include <dt-bindings/reset/sun5i-ccu.h> + +static struct ccu_clk_gate a10s_gates[] = { + [CLK_AHB_OTG] = GATE(0x060, BIT(0)), + [CLK_AHB_EHCI] = GATE(0x060, BIT(1)), + [CLK_AHB_OHCI] = GATE(0x060, BIT(2)), + + [CLK_APB1_UART0] = GATE(0x06c, BIT(16)), + [CLK_APB1_UART1] = GATE(0x06c, BIT(17)), + [CLK_APB1_UART2] = GATE(0x06c, BIT(18)), + [CLK_APB1_UART3] = GATE(0x06c, BIT(19)), + + [CLK_USB_OHCI] = GATE(0x0cc, BIT(6)), + [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), + [CLK_USB_PHY1] = GATE(0x0cc, BIT(9)), +}; + +static struct ccu_reset a10s_resets[] = { + [RST_USB_PHY0] = RESET(0x0cc, BIT(0)), + [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), +}; + +static const struct ccu_desc a10s_ccu_desc = { + .gates = a10s_gates, + .resets = a10s_resets, +}; + +static int a10s_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(a10s_resets)); +} + +static const struct udevice_id a10s_ccu_ids[] = { + { .compatible = "allwinner,sun5i-a10s-ccu", + .data = (ulong)&a10s_ccu_desc }, + { .compatible = "allwinner,sun5i-a13-ccu", + .data = (ulong)&a10s_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun5i_a10s) = { + .name = "sun5i_a10s_ccu", + .id = UCLASS_CLK, + .of_match = a10s_ccu_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = a10s_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_a23.c b/drivers/clk/sunxi/clk_a23.c new file mode 100644 index 0000000000..854259bf81 --- /dev/null +++ b/drivers/clk/sunxi/clk_a23.c @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun8i-a23-a33-ccu.h> +#include <dt-bindings/reset/sun8i-a23-a33-ccu.h> + +static struct ccu_clk_gate a23_gates[] = { + [CLK_BUS_OTG] = GATE(0x060, BIT(24)), + [CLK_BUS_EHCI] = GATE(0x060, BIT(26)), + [CLK_BUS_OHCI] = GATE(0x060, BIT(29)), + + [CLK_BUS_UART0] = GATE(0x06c, BIT(16)), + [CLK_BUS_UART1] = GATE(0x06c, BIT(17)), + [CLK_BUS_UART2] = GATE(0x06c, BIT(18)), + [CLK_BUS_UART3] = GATE(0x06c, BIT(19)), + [CLK_BUS_UART4] = GATE(0x06c, BIT(20)), + + [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), + [CLK_USB_PHY1] = GATE(0x0cc, BIT(9)), + [CLK_USB_HSIC] = GATE(0x0cc, BIT(10)), + [CLK_USB_HSIC_12M] = GATE(0x0cc, BIT(11)), + [CLK_USB_OHCI] = GATE(0x0cc, BIT(16)), +}; + +static struct ccu_reset a23_resets[] = { + [RST_USB_PHY0] = RESET(0x0cc, BIT(0)), + [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), + [RST_USB_HSIC] = RESET(0x0cc, BIT(2)), + + [RST_BUS_OTG] = RESET(0x2c0, BIT(24)), + [RST_BUS_EHCI] = RESET(0x2c0, BIT(26)), + [RST_BUS_OHCI] = RESET(0x2c0, BIT(29)), + + [RST_BUS_UART0] = RESET(0x2d8, BIT(16)), + [RST_BUS_UART1] = RESET(0x2d8, BIT(17)), + [RST_BUS_UART2] = RESET(0x2d8, BIT(18)), + [RST_BUS_UART3] = RESET(0x2d8, BIT(19)), + [RST_BUS_UART4] = RESET(0x2d8, BIT(20)), +}; + +static const struct ccu_desc a23_ccu_desc = { + .gates = a23_gates, + .resets = a23_resets, +}; + +static int a23_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(a23_resets)); +} + +static const struct udevice_id a23_clk_ids[] = { + { .compatible = "allwinner,sun8i-a23-ccu", + .data = (ulong)&a23_ccu_desc }, + { .compatible = "allwinner,sun8i-a33-ccu", + .data = (ulong)&a23_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun8i_a23) = { + .name = "sun8i_a23_ccu", + .id = UCLASS_CLK, + .of_match = a23_clk_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = a23_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_a31.c b/drivers/clk/sunxi/clk_a31.c new file mode 100644 index 0000000000..a38d76cb7c --- /dev/null +++ b/drivers/clk/sunxi/clk_a31.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun6i-a31-ccu.h> +#include <dt-bindings/reset/sun6i-a31-ccu.h> + +static struct ccu_clk_gate a31_gates[] = { + [CLK_AHB1_OTG] = GATE(0x060, BIT(24)), + [CLK_AHB1_EHCI0] = GATE(0x060, BIT(26)), + [CLK_AHB1_EHCI1] = GATE(0x060, BIT(27)), + [CLK_AHB1_OHCI0] = GATE(0x060, BIT(29)), + [CLK_AHB1_OHCI1] = GATE(0x060, BIT(30)), + [CLK_AHB1_OHCI2] = GATE(0x060, BIT(31)), + + [CLK_APB2_UART0] = GATE(0x06c, BIT(16)), + [CLK_APB2_UART1] = GATE(0x06c, BIT(17)), + [CLK_APB2_UART2] = GATE(0x06c, BIT(18)), + [CLK_APB2_UART3] = GATE(0x06c, BIT(19)), + [CLK_APB2_UART4] = GATE(0x06c, BIT(20)), + [CLK_APB2_UART5] = GATE(0x06c, BIT(21)), + + [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), + [CLK_USB_PHY1] = GATE(0x0cc, BIT(9)), + [CLK_USB_PHY2] = GATE(0x0cc, BIT(10)), + [CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)), + [CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)), + [CLK_USB_OHCI2] = GATE(0x0cc, BIT(18)), +}; + +static struct ccu_reset a31_resets[] = { + [RST_USB_PHY0] = RESET(0x0cc, BIT(0)), + [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), + [RST_USB_PHY2] = RESET(0x0cc, BIT(2)), + + [RST_AHB1_OTG] = RESET(0x2c0, BIT(24)), + [RST_AHB1_EHCI0] = RESET(0x2c0, BIT(26)), + [RST_AHB1_EHCI1] = RESET(0x2c0, BIT(27)), + [RST_AHB1_OHCI0] = RESET(0x2c0, BIT(29)), + [RST_AHB1_OHCI1] = RESET(0x2c0, BIT(30)), + [RST_AHB1_OHCI2] = RESET(0x2c0, BIT(31)), + + [RST_APB2_UART0] = RESET(0x2d8, BIT(16)), + [RST_APB2_UART1] = RESET(0x2d8, BIT(17)), + [RST_APB2_UART2] = RESET(0x2d8, BIT(18)), + [RST_APB2_UART3] = RESET(0x2d8, BIT(19)), + [RST_APB2_UART4] = RESET(0x2d8, BIT(20)), + [RST_APB2_UART5] = RESET(0x2d8, BIT(21)), +}; + +static const struct ccu_desc a31_ccu_desc = { + .gates = a31_gates, + .resets = a31_resets, +}; + +static int a31_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(a31_resets)); +} + +static const struct udevice_id a31_clk_ids[] = { + { .compatible = "allwinner,sun6i-a31-ccu", + .data = (ulong)&a31_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun6i_a31) = { + .name = "sun6i_a31_ccu", + .id = UCLASS_CLK, + .of_match = a31_clk_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = a31_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_a64.c b/drivers/clk/sunxi/clk_a64.c new file mode 100644 index 0000000000..a2ba6eefc5 --- /dev/null +++ b/drivers/clk/sunxi/clk_a64.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun50i-a64-ccu.h> +#include <dt-bindings/reset/sun50i-a64-ccu.h> + +static const struct ccu_clk_gate a64_gates[] = { + [CLK_BUS_OTG] = GATE(0x060, BIT(23)), + [CLK_BUS_EHCI0] = GATE(0x060, BIT(24)), + [CLK_BUS_EHCI1] = GATE(0x060, BIT(25)), + [CLK_BUS_OHCI0] = GATE(0x060, BIT(28)), + [CLK_BUS_OHCI1] = GATE(0x060, BIT(29)), + + [CLK_BUS_UART0] = GATE(0x06c, BIT(16)), + [CLK_BUS_UART1] = GATE(0x06c, BIT(17)), + [CLK_BUS_UART2] = GATE(0x06c, BIT(18)), + [CLK_BUS_UART3] = GATE(0x06c, BIT(19)), + [CLK_BUS_UART4] = GATE(0x06c, BIT(20)), + + [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), + [CLK_USB_PHY1] = GATE(0x0cc, BIT(9)), + [CLK_USB_HSIC] = GATE(0x0cc, BIT(10)), + [CLK_USB_HSIC_12M] = GATE(0x0cc, BIT(11)), + [CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)), + [CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)), +}; + +static const struct ccu_reset a64_resets[] = { + [RST_USB_PHY0] = RESET(0x0cc, BIT(0)), + [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), + [RST_USB_HSIC] = RESET(0x0cc, BIT(2)), + + [RST_BUS_OTG] = RESET(0x2c0, BIT(23)), + [RST_BUS_EHCI0] = RESET(0x2c0, BIT(24)), + [RST_BUS_EHCI1] = RESET(0x2c0, BIT(25)), + [RST_BUS_OHCI0] = RESET(0x2c0, BIT(28)), + [RST_BUS_OHCI1] = RESET(0x2c0, BIT(29)), + + [RST_BUS_UART0] = RESET(0x2d8, BIT(16)), + [RST_BUS_UART1] = RESET(0x2d8, BIT(17)), + [RST_BUS_UART2] = RESET(0x2d8, BIT(18)), + [RST_BUS_UART3] = RESET(0x2d8, BIT(19)), + [RST_BUS_UART4] = RESET(0x2d8, BIT(20)), +}; + +static const struct ccu_desc a64_ccu_desc = { + .gates = a64_gates, + .resets = a64_resets, +}; + +static int a64_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(a64_resets)); +} + +static const struct udevice_id a64_ccu_ids[] = { + { .compatible = "allwinner,sun50i-a64-ccu", + .data = (ulong)&a64_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun50i_a64) = { + .name = "sun50i_a64_ccu", + .id = UCLASS_CLK, + .of_match = a64_ccu_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = a64_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_a80.c b/drivers/clk/sunxi/clk_a80.c new file mode 100644 index 0000000000..d6dd6a1fa1 --- /dev/null +++ b/drivers/clk/sunxi/clk_a80.c @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun9i-a80-ccu.h> +#include <dt-bindings/reset/sun9i-a80-ccu.h> + +static const struct ccu_clk_gate a80_gates[] = { + [CLK_BUS_UART0] = GATE(0x594, BIT(16)), + [CLK_BUS_UART1] = GATE(0x594, BIT(17)), + [CLK_BUS_UART2] = GATE(0x594, BIT(18)), + [CLK_BUS_UART3] = GATE(0x594, BIT(19)), + [CLK_BUS_UART4] = GATE(0x594, BIT(20)), + [CLK_BUS_UART5] = GATE(0x594, BIT(21)), +}; + +static const struct ccu_reset a80_resets[] = { + [RST_BUS_UART0] = RESET(0x5b4, BIT(16)), + [RST_BUS_UART1] = RESET(0x5b4, BIT(17)), + [RST_BUS_UART2] = RESET(0x5b4, BIT(18)), + [RST_BUS_UART3] = RESET(0x5b4, BIT(19)), + [RST_BUS_UART4] = RESET(0x5b4, BIT(20)), + [RST_BUS_UART5] = RESET(0x5b4, BIT(21)), +}; + +static const struct ccu_desc a80_ccu_desc = { + .gates = a80_gates, + .resets = a80_resets, +}; + +static int a80_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(a80_resets)); +} + +static const struct udevice_id a80_ccu_ids[] = { + { .compatible = "allwinner,sun9i-a80-ccu", + .data = (ulong)&a80_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun9i_a80) = { + .name = "sun9i_a80_ccu", + .id = UCLASS_CLK, + .of_match = a80_ccu_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = a80_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_a83t.c b/drivers/clk/sunxi/clk_a83t.c new file mode 100644 index 0000000000..1ef6ac5b25 --- /dev/null +++ b/drivers/clk/sunxi/clk_a83t.c @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun8i-a83t-ccu.h> +#include <dt-bindings/reset/sun8i-a83t-ccu.h> + +static struct ccu_clk_gate a83t_gates[] = { + [CLK_BUS_OTG] = GATE(0x060, BIT(24)), + [CLK_BUS_EHCI0] = GATE(0x060, BIT(26)), + [CLK_BUS_EHCI1] = GATE(0x060, BIT(27)), + [CLK_BUS_OHCI0] = GATE(0x060, BIT(29)), + + [CLK_BUS_UART0] = GATE(0x06c, BIT(16)), + [CLK_BUS_UART1] = GATE(0x06c, BIT(17)), + [CLK_BUS_UART2] = GATE(0x06c, BIT(18)), + [CLK_BUS_UART3] = GATE(0x06c, BIT(19)), + [CLK_BUS_UART4] = GATE(0x06c, BIT(20)), + + [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), + [CLK_USB_PHY1] = GATE(0x0cc, BIT(9)), + [CLK_USB_HSIC] = GATE(0x0cc, BIT(10)), + [CLK_USB_HSIC_12M] = GATE(0x0cc, BIT(11)), + [CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)), +}; + +static struct ccu_reset a83t_resets[] = { + [RST_USB_PHY0] = RESET(0x0cc, BIT(0)), + [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), + [RST_USB_HSIC] = RESET(0x0cc, BIT(2)), + + [RST_BUS_OTG] = RESET(0x2c0, BIT(24)), + [RST_BUS_EHCI0] = RESET(0x2c0, BIT(26)), + [RST_BUS_EHCI1] = RESET(0x2c0, BIT(27)), + [RST_BUS_OHCI0] = RESET(0x2c0, BIT(29)), + + [RST_BUS_UART0] = RESET(0x2d8, BIT(16)), + [RST_BUS_UART1] = RESET(0x2d8, BIT(17)), + [RST_BUS_UART2] = RESET(0x2d8, BIT(18)), + [RST_BUS_UART3] = RESET(0x2d8, BIT(19)), + [RST_BUS_UART4] = RESET(0x2d8, BIT(20)), +}; + +static const struct ccu_desc a83t_ccu_desc = { + .gates = a83t_gates, + .resets = a83t_resets, +}; + +static int a83t_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(a83t_resets)); +} + +static const struct udevice_id a83t_clk_ids[] = { + { .compatible = "allwinner,sun8i-a83t-ccu", + .data = (ulong)&a83t_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun8i_a83t) = { + .name = "sun8i_a83t_ccu", + .id = UCLASS_CLK, + .of_match = a83t_clk_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = a83t_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_h3.c b/drivers/clk/sunxi/clk_h3.c new file mode 100644 index 0000000000..f82949b3b6 --- /dev/null +++ b/drivers/clk/sunxi/clk_h3.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun8i-h3-ccu.h> +#include <dt-bindings/reset/sun8i-h3-ccu.h> + +static struct ccu_clk_gate h3_gates[] = { + [CLK_BUS_OTG] = GATE(0x060, BIT(23)), + [CLK_BUS_EHCI0] = GATE(0x060, BIT(24)), + [CLK_BUS_EHCI1] = GATE(0x060, BIT(25)), + [CLK_BUS_EHCI2] = GATE(0x060, BIT(26)), + [CLK_BUS_EHCI3] = GATE(0x060, BIT(27)), + [CLK_BUS_OHCI0] = GATE(0x060, BIT(28)), + [CLK_BUS_OHCI1] = GATE(0x060, BIT(29)), + [CLK_BUS_OHCI2] = GATE(0x060, BIT(30)), + [CLK_BUS_OHCI3] = GATE(0x060, BIT(31)), + + [CLK_BUS_UART0] = GATE(0x06c, BIT(16)), + [CLK_BUS_UART1] = GATE(0x06c, BIT(17)), + [CLK_BUS_UART2] = GATE(0x06c, BIT(18)), + [CLK_BUS_UART3] = GATE(0x06c, BIT(19)), + + [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), + [CLK_USB_PHY1] = GATE(0x0cc, BIT(9)), + [CLK_USB_PHY2] = GATE(0x0cc, BIT(10)), + [CLK_USB_PHY3] = GATE(0x0cc, BIT(11)), + [CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)), + [CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)), + [CLK_USB_OHCI2] = GATE(0x0cc, BIT(18)), + [CLK_USB_OHCI3] = GATE(0x0cc, BIT(19)), +}; + +static struct ccu_reset h3_resets[] = { + [RST_USB_PHY0] = RESET(0x0cc, BIT(0)), + [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), + [RST_USB_PHY2] = RESET(0x0cc, BIT(2)), + [RST_USB_PHY3] = RESET(0x0cc, BIT(3)), + + [RST_BUS_OTG] = RESET(0x2c0, BIT(23)), + [RST_BUS_EHCI0] = RESET(0x2c0, BIT(24)), + [RST_BUS_EHCI1] = RESET(0x2c0, BIT(25)), + [RST_BUS_EHCI2] = RESET(0x2c0, BIT(26)), + [RST_BUS_EHCI3] = RESET(0x2c0, BIT(27)), + [RST_BUS_OHCI0] = RESET(0x2c0, BIT(28)), + [RST_BUS_OHCI1] = RESET(0x2c0, BIT(29)), + [RST_BUS_OHCI2] = RESET(0x2c0, BIT(30)), + [RST_BUS_OHCI3] = RESET(0x2c0, BIT(31)), + + [RST_BUS_UART0] = RESET(0x2d8, BIT(16)), + [RST_BUS_UART1] = RESET(0x2d8, BIT(17)), + [RST_BUS_UART2] = RESET(0x2d8, BIT(18)), + [RST_BUS_UART3] = RESET(0x2d8, BIT(19)), +}; + +static const struct ccu_desc h3_ccu_desc = { + .gates = h3_gates, + .resets = h3_resets, +}; + +static int h3_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(h3_resets)); +} + +static const struct udevice_id h3_ccu_ids[] = { + { .compatible = "allwinner,sun8i-h3-ccu", + .data = (ulong)&h3_ccu_desc }, + { .compatible = "allwinner,sun50i-h5-ccu", + .data = (ulong)&h3_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun8i_h3) = { + .name = "sun8i_h3_ccu", + .id = UCLASS_CLK, + .of_match = h3_ccu_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = h3_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_h6.c b/drivers/clk/sunxi/clk_h6.c new file mode 100644 index 0000000000..0da3a40e3d --- /dev/null +++ b/drivers/clk/sunxi/clk_h6.c @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun50i-h6-ccu.h> +#include <dt-bindings/reset/sun50i-h6-ccu.h> + +static struct ccu_clk_gate h6_gates[] = { + [CLK_BUS_UART0] = GATE(0x90c, BIT(0)), + [CLK_BUS_UART1] = GATE(0x90c, BIT(1)), + [CLK_BUS_UART2] = GATE(0x90c, BIT(2)), + [CLK_BUS_UART3] = GATE(0x90c, BIT(3)), +}; + +static struct ccu_reset h6_resets[] = { + [RST_BUS_UART0] = RESET(0x90c, BIT(16)), + [RST_BUS_UART1] = RESET(0x90c, BIT(17)), + [RST_BUS_UART2] = RESET(0x90c, BIT(18)), + [RST_BUS_UART3] = RESET(0x90c, BIT(19)), +}; + +static const struct ccu_desc h6_ccu_desc = { + .gates = h6_gates, + .resets = h6_resets, +}; + +static int h6_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(h6_resets)); +} + +static const struct udevice_id h6_ccu_ids[] = { + { .compatible = "allwinner,sun50i-h6-ccu", + .data = (ulong)&h6_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun50i_h6) = { + .name = "sun50i_h6_ccu", + .id = UCLASS_CLK, + .of_match = h6_ccu_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = h6_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_r40.c b/drivers/clk/sunxi/clk_r40.c new file mode 100644 index 0000000000..fd7aae97ea --- /dev/null +++ b/drivers/clk/sunxi/clk_r40.c @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun8i-r40-ccu.h> +#include <dt-bindings/reset/sun8i-r40-ccu.h> + +static struct ccu_clk_gate r40_gates[] = { + [CLK_BUS_OTG] = GATE(0x060, BIT(25)), + [CLK_BUS_EHCI0] = GATE(0x060, BIT(26)), + [CLK_BUS_EHCI1] = GATE(0x060, BIT(27)), + [CLK_BUS_EHCI2] = GATE(0x060, BIT(28)), + [CLK_BUS_OHCI0] = GATE(0x060, BIT(29)), + [CLK_BUS_OHCI1] = GATE(0x060, BIT(30)), + [CLK_BUS_OHCI2] = GATE(0x060, BIT(31)), + + [CLK_BUS_UART0] = GATE(0x06c, BIT(16)), + [CLK_BUS_UART1] = GATE(0x06c, BIT(17)), + [CLK_BUS_UART2] = GATE(0x06c, BIT(18)), + [CLK_BUS_UART3] = GATE(0x06c, BIT(19)), + [CLK_BUS_UART4] = GATE(0x06c, BIT(20)), + [CLK_BUS_UART5] = GATE(0x06c, BIT(21)), + [CLK_BUS_UART6] = GATE(0x06c, BIT(22)), + [CLK_BUS_UART7] = GATE(0x06c, BIT(23)), + + [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), + [CLK_USB_PHY1] = GATE(0x0cc, BIT(9)), + [CLK_USB_PHY2] = GATE(0x0cc, BIT(10)), + [CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)), + [CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)), + [CLK_USB_OHCI2] = GATE(0x0cc, BIT(18)), +}; + +static struct ccu_reset r40_resets[] = { + [RST_USB_PHY0] = RESET(0x0cc, BIT(0)), + [RST_USB_PHY1] = RESET(0x0cc, BIT(1)), + [RST_USB_PHY2] = RESET(0x0cc, BIT(2)), + + [RST_BUS_OTG] = RESET(0x2c0, BIT(25)), + [RST_BUS_EHCI0] = RESET(0x2c0, BIT(26)), + [RST_BUS_EHCI1] = RESET(0x2c0, BIT(27)), + [RST_BUS_EHCI2] = RESET(0x2c0, BIT(28)), + [RST_BUS_OHCI0] = RESET(0x2c0, BIT(29)), + [RST_BUS_OHCI1] = RESET(0x2c0, BIT(30)), + [RST_BUS_OHCI2] = RESET(0x2c0, BIT(31)), + + [RST_BUS_UART0] = RESET(0x2d8, BIT(16)), + [RST_BUS_UART1] = RESET(0x2d8, BIT(17)), + [RST_BUS_UART2] = RESET(0x2d8, BIT(18)), + [RST_BUS_UART3] = RESET(0x2d8, BIT(19)), + [RST_BUS_UART4] = RESET(0x2d8, BIT(20)), + [RST_BUS_UART5] = RESET(0x2d8, BIT(21)), + [RST_BUS_UART6] = RESET(0x2d8, BIT(22)), + [RST_BUS_UART7] = RESET(0x2d8, BIT(23)), +}; + +static const struct ccu_desc r40_ccu_desc = { + .gates = r40_gates, + .resets = r40_resets, +}; + +static int r40_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(r40_resets)); +} + +static const struct udevice_id r40_clk_ids[] = { + { .compatible = "allwinner,sun8i-r40-ccu", + .data = (ulong)&r40_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun8i_r40) = { + .name = "sun8i_r40_ccu", + .id = UCLASS_CLK, + .of_match = r40_clk_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = r40_clk_bind, +}; diff --git a/drivers/clk/sunxi/clk_sunxi.c b/drivers/clk/sunxi/clk_sunxi.c new file mode 100644 index 0000000000..62ce2994e4 --- /dev/null +++ b/drivers/clk/sunxi/clk_sunxi.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/ccu.h> +#include <linux/log2.h> + +static const struct ccu_clk_gate *priv_to_gate(struct ccu_priv *priv, + unsigned long id) +{ + return &priv->desc->gates[id]; +} + +static int sunxi_set_gate(struct clk *clk, bool on) +{ + struct ccu_priv *priv = dev_get_priv(clk->dev); + const struct ccu_clk_gate *gate = priv_to_gate(priv, clk->id); + u32 reg; + + if (!(gate->flags & CCU_CLK_F_IS_VALID)) { + printf("%s: (CLK#%ld) unhandled\n", __func__, clk->id); + return 0; + } + + debug("%s: (CLK#%ld) off#0x%x, BIT(%d)\n", __func__, + clk->id, gate->off, ilog2(gate->bit)); + + reg = readl(priv->base + gate->off); + if (on) + reg |= gate->bit; + else + reg &= ~gate->bit; + + writel(reg, priv->base + gate->off); + + return 0; +} + +static int sunxi_clk_enable(struct clk *clk) +{ + return sunxi_set_gate(clk, true); +} + +static int sunxi_clk_disable(struct clk *clk) +{ + return sunxi_set_gate(clk, false); +} + +struct clk_ops sunxi_clk_ops = { + .enable = sunxi_clk_enable, + .disable = sunxi_clk_disable, +}; + +int sunxi_clk_probe(struct udevice *dev) +{ + struct ccu_priv *priv = dev_get_priv(dev); + + priv->base = dev_read_addr_ptr(dev); + if (!priv->base) + return -ENOMEM; + + priv->desc = (const struct ccu_desc *)dev_get_driver_data(dev); + if (!priv->desc) + return -EINVAL; + + return 0; +} diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c new file mode 100644 index 0000000000..25ad87500e --- /dev/null +++ b/drivers/clk/sunxi/clk_v3s.c @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <clk-uclass.h> +#include <dm.h> +#include <errno.h> +#include <asm/arch/ccu.h> +#include <dt-bindings/clock/sun8i-v3s-ccu.h> +#include <dt-bindings/reset/sun8i-v3s-ccu.h> + +static struct ccu_clk_gate v3s_gates[] = { + [CLK_BUS_OTG] = GATE(0x060, BIT(24)), + + [CLK_BUS_UART0] = GATE(0x06c, BIT(16)), + [CLK_BUS_UART1] = GATE(0x06c, BIT(17)), + [CLK_BUS_UART2] = GATE(0x06c, BIT(18)), + + [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), +}; + +static struct ccu_reset v3s_resets[] = { + [RST_USB_PHY0] = RESET(0x0cc, BIT(0)), + + [RST_BUS_OTG] = RESET(0x2c0, BIT(24)), + + [RST_BUS_UART0] = RESET(0x2d8, BIT(16)), + [RST_BUS_UART1] = RESET(0x2d8, BIT(17)), + [RST_BUS_UART2] = RESET(0x2d8, BIT(18)), +}; + +static const struct ccu_desc v3s_ccu_desc = { + .gates = v3s_gates, + .resets = v3s_resets, +}; + +static int v3s_clk_bind(struct udevice *dev) +{ + return sunxi_reset_bind(dev, ARRAY_SIZE(v3s_resets)); +} + +static const struct udevice_id v3s_clk_ids[] = { + { .compatible = "allwinner,sun8i-v3s-ccu", + .data = (ulong)&v3s_ccu_desc }, + { } +}; + +U_BOOT_DRIVER(clk_sun8i_v3s) = { + .name = "sun8i_v3s_ccu", + .id = UCLASS_CLK, + .of_match = v3s_clk_ids, + .priv_auto_alloc_size = sizeof(struct ccu_priv), + .ops = &sunxi_clk_ops, + .probe = sunxi_clk_probe, + .bind = v3s_clk_bind, +}; diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index a7d7e3f044..f206fa3f5d 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -11,10 +11,12 @@ */ #include <common.h> +#include <clk.h> #include <dm.h> #include <dm/device.h> #include <generic-phy.h> #include <phy-sun4i-usb.h> +#include <reset.h> #include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/clock.h> @@ -80,6 +82,7 @@ struct sun4i_usb_phy_cfg { enum sun4i_usb_phy_type type; u32 disc_thresh; u8 phyctl_offset; + bool dedicated_clocks; bool enable_pmu_unk1; bool phy0_dual_route; }; @@ -88,30 +91,21 @@ struct sun4i_usb_phy_info { const char *gpio_vbus; const char *gpio_vbus_det; const char *gpio_id_det; - int rst_mask; } phy_info[] = { { .gpio_vbus = CONFIG_USB0_VBUS_PIN, .gpio_vbus_det = CONFIG_USB0_VBUS_DET, .gpio_id_det = CONFIG_USB0_ID_DET, - .rst_mask = (CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK), }, { .gpio_vbus = CONFIG_USB1_VBUS_PIN, .gpio_vbus_det = NULL, .gpio_id_det = NULL, - .rst_mask = (CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK), }, { .gpio_vbus = CONFIG_USB2_VBUS_PIN, .gpio_vbus_det = NULL, .gpio_id_det = NULL, -#ifdef CONFIG_MACH_SUN8I_A83T - .rst_mask = (CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK | - CCM_USB_CTRL_12M_CLK), -#else - .rst_mask = (CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK), -#endif }, { .gpio_vbus = CONFIG_USB3_VBUS_PIN, @@ -126,13 +120,13 @@ struct sun4i_usb_phy_plat { int gpio_vbus; int gpio_vbus_det; int gpio_id_det; - int rst_mask; + struct clk clocks; + struct reset_ctl resets; int id; }; struct sun4i_usb_phy_data { void __iomem *base; - struct sunxi_ccm_reg *ccm; const struct sun4i_usb_phy_cfg *cfg; struct sun4i_usb_phy_plat *usb_phy; }; @@ -266,8 +260,19 @@ static int sun4i_usb_phy_init(struct phy *phy) struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev); struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id]; u32 val; + int ret; - setbits_le32(&data->ccm->usb_clk_cfg, usb_phy->rst_mask); + ret = clk_enable(&usb_phy->clocks); + if (ret) { + dev_err(dev, "failed to enable usb_%ldphy clock\n", phy->id); + return ret; + } + + ret = reset_deassert(&usb_phy->resets); + if (ret) { + dev_err(dev, "failed to deassert usb_%ldreset reset\n", phy->id); + return ret; + } if (data->cfg->type == sun8i_a83t_phy) { if (phy->id == 0) { @@ -308,6 +313,7 @@ static int sun4i_usb_phy_exit(struct phy *phy) { struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev); struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id]; + int ret; if (phy->id == 0) { if (data->cfg->type == sun8i_a83t_phy) { @@ -320,7 +326,17 @@ static int sun4i_usb_phy_exit(struct phy *phy) sun4i_usb_phy_passby(phy, false); - clrbits_le32(&data->ccm->usb_clk_cfg, usb_phy->rst_mask); + ret = clk_disable(&usb_phy->clocks); + if (ret) { + dev_err(dev, "failed to disable usb_%ldphy clock\n", phy->id); + return ret; + } + + ret = reset_assert(&usb_phy->resets); + if (ret) { + dev_err(dev, "failed to assert usb_%ldreset reset\n", phy->id); + return ret; + } return 0; } @@ -407,10 +423,6 @@ static int sun4i_usb_phy_probe(struct udevice *dev) if (IS_ERR(data->base)) return PTR_ERR(data->base); - data->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - if (IS_ERR(data->ccm)) - return PTR_ERR(data->ccm); - data->usb_phy = plat; for (i = 0; i < data->cfg->num_phys; i++) { struct sun4i_usb_phy_plat *phy = &plat[i]; @@ -448,6 +460,24 @@ static int sun4i_usb_phy_probe(struct udevice *dev) sunxi_gpio_set_pull(phy->gpio_id_det, SUNXI_GPIO_PULL_UP); } + if (data->cfg->dedicated_clocks) + snprintf(name, sizeof(name), "usb%d_phy", i); + else + strlcpy(name, "usb_phy", sizeof(name)); + + ret = clk_get_by_name(dev, name, &phy->clocks); + if (ret) { + dev_err(dev, "failed to get usb%d_phy clock phandle\n", i); + return ret; + } + + snprintf(name, sizeof(name), "usb%d_reset", i); + ret = reset_get_by_name(dev, name, &phy->resets); + if (ret) { + dev_err(dev, "failed to get usb%d_reset reset phandle\n", i); + return ret; + } + if (i || data->cfg->phy0_dual_route) { snprintf(name, sizeof(name), "pmu%d", i); phy->pmu = (void __iomem *)devfdt_get_addr_name(dev, name); @@ -456,9 +486,6 @@ static int sun4i_usb_phy_probe(struct udevice *dev) } phy->id = i; - phy->rst_mask = info->rst_mask; - if ((data->cfg->type == sun8i_h3_phy) && (phy->id == 3)) - phy->rst_mask = (BIT(3) | BIT(11)); }; debug("Allwinner Sun4I USB PHY driver loaded\n"); @@ -470,6 +497,7 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { .type = sun4i_a10_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = false, .enable_pmu_unk1 = false, }; @@ -478,6 +506,7 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { .type = sun4i_a10_phy, .disc_thresh = 2, .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = false, .enable_pmu_unk1 = false, }; @@ -486,6 +515,7 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { .type = sun6i_a31_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = true, .enable_pmu_unk1 = false, }; @@ -494,6 +524,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { .type = sun4i_a10_phy, .disc_thresh = 2, .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = false, .enable_pmu_unk1 = false, }; @@ -502,6 +533,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { .type = sun4i_a10_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = true, .enable_pmu_unk1 = false, }; @@ -510,6 +542,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { .type = sun8i_a33_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, .enable_pmu_unk1 = false, }; @@ -517,6 +550,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = { .num_phys = 3, .type = sun8i_a83t_phy, .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, }; static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { @@ -524,6 +558,7 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { .type = sun8i_h3_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, .enable_pmu_unk1 = true, .phy0_dual_route = true, }; @@ -533,6 +568,7 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { .type = sun8i_v3s_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, .enable_pmu_unk1 = true, .phy0_dual_route = true, }; @@ -542,6 +578,7 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { .type = sun50i_a64_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, + .dedicated_clocks = true, .enable_pmu_unk1 = true, .phy0_dual_route = true, }; diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 3a6d61f440..a81e767696 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -113,4 +113,12 @@ config RESET_MEDIATEK help Support for reset controller on MediaTek SoCs. +config RESET_SUNXI + bool "RESET support for Allwinner SoCs" + depends on DM_RESET && ARCH_SUNXI + default y + help + This enables support for common reset driver for + Allwinner SoCs. + endmenu diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 8a4dcab8f6..4fad7d4129 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_RESET_ROCKCHIP) += reset-rockchip.o obj-$(CONFIG_RESET_MESON) += reset-meson.o obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o obj-$(CONFIG_RESET_MEDIATEK) += reset-mediatek.o +obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c new file mode 100644 index 0000000000..364dc52fb7 --- /dev/null +++ b/drivers/reset/reset-sunxi.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Amarula Solutions. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <reset-uclass.h> +#include <asm/io.h> +#include <dm/lists.h> +#include <linux/log2.h> +#include <asm/arch/ccu.h> + +struct sunxi_reset_priv { + void *base; + ulong count; + const struct ccu_desc *desc; +}; + +static const struct ccu_reset *priv_to_reset(struct sunxi_reset_priv *priv, + unsigned long id) +{ + return &priv->desc->resets[id]; +} + +static int sunxi_reset_request(struct reset_ctl *reset_ctl) +{ + struct sunxi_reset_priv *priv = dev_get_priv(reset_ctl->dev); + + debug("%s: (RST#%ld)\n", __func__, reset_ctl->id); + + if (reset_ctl->id >= priv->count) + return -EINVAL; + + return 0; +} + +static int sunxi_reset_free(struct reset_ctl *reset_ctl) +{ + debug("%s: (RST#%ld)\n", __func__, reset_ctl->id); + + return 0; +} + +static int sunxi_set_reset(struct reset_ctl *reset_ctl, bool on) +{ + struct sunxi_reset_priv *priv = dev_get_priv(reset_ctl->dev); + const struct ccu_reset *reset = priv_to_reset(priv, reset_ctl->id); + u32 reg; + + if (!(reset->flags & CCU_RST_F_IS_VALID)) { + printf("%s: (RST#%ld) unhandled\n", __func__, reset_ctl->id); + return 0; + } + + debug("%s: (RST#%ld) off#0x%x, BIT(%d)\n", __func__, + reset_ctl->id, reset->off, ilog2(reset->bit)); + + reg = readl(priv->base + reset->off); + if (on) + reg |= reset->bit; + else + reg &= ~reset->bit; + + writel(reg, priv->base + reset->off); + + return 0; +} + +static int sunxi_reset_assert(struct reset_ctl *reset_ctl) +{ + return sunxi_set_reset(reset_ctl, false); +} + +static int sunxi_reset_deassert(struct reset_ctl *reset_ctl) +{ + return sunxi_set_reset(reset_ctl, true); +} + +struct reset_ops sunxi_reset_ops = { + .request = sunxi_reset_request, + .free = sunxi_reset_free, + .rst_assert = sunxi_reset_assert, + .rst_deassert = sunxi_reset_deassert, +}; + +static int sunxi_reset_probe(struct udevice *dev) +{ + struct sunxi_reset_priv *priv = dev_get_priv(dev); + + priv->base = dev_read_addr_ptr(dev); + + return 0; +} + +int sunxi_reset_bind(struct udevice *dev, ulong count) +{ + struct udevice *rst_dev; + struct sunxi_reset_priv *priv; + int ret; + + ret = device_bind_driver_to_node(dev, "sunxi_reset", "reset", + dev_ofnode(dev), &rst_dev); + if (ret) { + debug("failed to bind sunxi_reset driver (ret=%d)\n", ret); + return ret; + } + priv = malloc(sizeof(struct sunxi_reset_priv)); + priv->count = count; + priv->desc = (const struct ccu_desc *)dev_get_driver_data(dev); + rst_dev->priv = priv; + + return 0; +} + +U_BOOT_DRIVER(sunxi_reset) = { + .name = "sunxi_reset", + .id = UCLASS_RESET, + .ops = &sunxi_reset_ops, + .probe = sunxi_reset_probe, + .priv_auto_alloc_size = sizeof(struct sunxi_reset_priv), +}; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a213c918bc..60f37f40fd 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -190,6 +190,7 @@ config USB_EHCI_GENERIC bool "Support for generic EHCI USB controller" depends on OF_CONTROL depends on DM_USB + default ARCH_SUNXI default n ---help--- Enables support for generic EHCI controller. @@ -220,6 +221,7 @@ config USB_OHCI_GENERIC bool "Support for generic OHCI USB controller" depends on OF_CONTROL depends on DM_USB + default ARCH_SUNXI select USB_HOST ---help--- Enables support for generic OHCI controller. diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 948683a52b..6aa574f6f7 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o obj-$(CONFIG_USB_SL811HS) += sl811-hcd.o obj-$(CONFIG_USB_OHCI_EP93XX) += ohci-ep93xx.o -obj-$(CONFIG_USB_OHCI_SUNXI) += ohci-sunxi.o obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o @@ -37,7 +36,6 @@ obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o -obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c deleted file mode 100644 index 7a79931a97..0000000000 --- a/drivers/usb/host/ehci-sunxi.c +++ /dev/null @@ -1,204 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Sunxi ehci glue - * - * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> - * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com> - * - * Based on code from - * Allwinner Technology Co., Ltd. <www.allwinnertech.com> - */ - -#include <common.h> -#include <asm/arch/clock.h> -#include <asm/io.h> -#include <dm.h> -#include "ehci.h" -#include <generic-phy.h> - -#ifdef CONFIG_SUNXI_GEN_SUN4I -#define BASE_DIST 0x8000 -#define AHB_CLK_DIST 2 -#else -#define BASE_DIST 0x1000 -#define AHB_CLK_DIST 1 -#endif - -#define SUN6I_AHB_RESET0_CFG_OFFSET 0x2c0 -#define SUN9I_AHB_RESET0_CFG_OFFSET 0x5a0 - -struct ehci_sunxi_cfg { - bool has_reset; - u32 extra_ahb_gate_mask; - u32 reset0_cfg_offset; -}; - -struct ehci_sunxi_priv { - struct ehci_ctrl ehci; - struct sunxi_ccm_reg *ccm; - u32 *reset0_cfg; - int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */ - struct phy phy; - const struct ehci_sunxi_cfg *cfg; -}; - -static int ehci_usb_probe(struct udevice *dev) -{ - struct usb_platdata *plat = dev_get_platdata(dev); - struct ehci_sunxi_priv *priv = dev_get_priv(dev); - struct ehci_hccr *hccr = (struct ehci_hccr *)devfdt_get_addr(dev); - struct ehci_hcor *hcor; - int extra_ahb_gate_mask = 0; - u8 reg_mask = 0; - int phys, ret; - - priv->cfg = (const struct ehci_sunxi_cfg *)dev_get_driver_data(dev); - priv->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - if (IS_ERR(priv->ccm)) - return PTR_ERR(priv->ccm); - - priv->reset0_cfg = (void *)priv->ccm + - priv->cfg->reset0_cfg_offset; - - phys = dev_count_phandle_with_args(dev, "phys", "#phy-cells"); - if (phys < 0) { - phys = 0; - goto no_phy; - } - - ret = generic_phy_get_by_name(dev, "usb", &priv->phy); - if (ret) { - pr_err("failed to get %s usb PHY\n", dev->name); - return ret; - } - - ret = generic_phy_init(&priv->phy); - if (ret) { - pr_err("failed to init %s USB PHY\n", dev->name); - return ret; - } - - ret = generic_phy_power_on(&priv->phy); - if (ret) { - pr_err("failed to power on %s USB PHY\n", dev->name); - return ret; - } - -no_phy: - /* - * This should go away once we've moved to the driver model for - * clocks resp. phys. - */ - reg_mask = ((uintptr_t)hccr - SUNXI_USB1_BASE) / BASE_DIST; - priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0; - extra_ahb_gate_mask = priv->cfg->extra_ahb_gate_mask; - priv->ahb_gate_mask <<= reg_mask * AHB_CLK_DIST; - extra_ahb_gate_mask <<= reg_mask * AHB_CLK_DIST; - - setbits_le32(&priv->ccm->ahb_gate0, - priv->ahb_gate_mask | extra_ahb_gate_mask); - if (priv->cfg->has_reset) - setbits_le32(priv->reset0_cfg, - priv->ahb_gate_mask | extra_ahb_gate_mask); - - hcor = (struct ehci_hcor *)((uintptr_t)hccr + - HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - - return ehci_register(dev, hccr, hcor, NULL, 0, plat->init_type); -} - -static int ehci_usb_remove(struct udevice *dev) -{ - struct ehci_sunxi_priv *priv = dev_get_priv(dev); - int ret; - - if (generic_phy_valid(&priv->phy)) { - ret = generic_phy_exit(&priv->phy); - if (ret) { - pr_err("failed to exit %s USB PHY\n", dev->name); - return ret; - } - } - - ret = ehci_deregister(dev); - if (ret) - return ret; - - if (priv->cfg->has_reset) - clrbits_le32(priv->reset0_cfg, priv->ahb_gate_mask); - clrbits_le32(&priv->ccm->ahb_gate0, priv->ahb_gate_mask); - - return 0; -} - -static const struct ehci_sunxi_cfg sun4i_a10_cfg = { - .has_reset = false, -}; - -static const struct ehci_sunxi_cfg sun6i_a31_cfg = { - .has_reset = true, - .reset0_cfg_offset = SUN6I_AHB_RESET0_CFG_OFFSET, -}; - -static const struct ehci_sunxi_cfg sun8i_h3_cfg = { - .has_reset = true, - .extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0, - .reset0_cfg_offset = SUN6I_AHB_RESET0_CFG_OFFSET, -}; - -static const struct ehci_sunxi_cfg sun9i_a80_cfg = { - .has_reset = true, - .reset0_cfg_offset = SUN9I_AHB_RESET0_CFG_OFFSET, -}; - -static const struct udevice_id ehci_usb_ids[] = { - { - .compatible = "allwinner,sun4i-a10-ehci", - .data = (ulong)&sun4i_a10_cfg, - }, - { - .compatible = "allwinner,sun5i-a13-ehci", - .data = (ulong)&sun4i_a10_cfg, - }, - { - .compatible = "allwinner,sun6i-a31-ehci", - .data = (ulong)&sun6i_a31_cfg, - }, - { - .compatible = "allwinner,sun7i-a20-ehci", - .data = (ulong)&sun4i_a10_cfg, - }, - { - .compatible = "allwinner,sun8i-a23-ehci", - .data = (ulong)&sun6i_a31_cfg, - }, - { - .compatible = "allwinner,sun8i-a83t-ehci", - .data = (ulong)&sun6i_a31_cfg, - }, - { - .compatible = "allwinner,sun8i-h3-ehci", - .data = (ulong)&sun8i_h3_cfg, - }, - { - .compatible = "allwinner,sun9i-a80-ehci", - .data = (ulong)&sun9i_a80_cfg, - }, - { - .compatible = "allwinner,sun50i-a64-ehci", - .data = (ulong)&sun8i_h3_cfg, - }, - { /* sentinel */ } -}; - -U_BOOT_DRIVER(ehci_sunxi) = { - .name = "ehci_sunxi", - .id = UCLASS_USB, - .of_match = ehci_usb_ids, - .probe = ehci_usb_probe, - .remove = ehci_usb_remove, - .ops = &ehci_usb_ops, - .platdata_auto_alloc_size = sizeof(struct usb_platdata), - .priv_auto_alloc_size = sizeof(struct ehci_sunxi_priv), - .flags = DM_FLAG_ALLOC_PRIV_DMA, -}; diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c deleted file mode 100644 index bb3c2475df..0000000000 --- a/drivers/usb/host/ohci-sunxi.c +++ /dev/null @@ -1,233 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Sunxi ohci glue - * - * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> - * - * Based on code from - * Allwinner Technology Co., Ltd. <www.allwinnertech.com> - */ - -#include <common.h> -#include <asm/arch/clock.h> -#include <asm/io.h> -#include <dm.h> -#include <usb.h> -#include "ohci.h" -#include <generic-phy.h> - -#ifdef CONFIG_SUNXI_GEN_SUN4I -#define BASE_DIST 0x8000 -#define AHB_CLK_DIST 2 -#else -#define BASE_DIST 0x1000 -#define AHB_CLK_DIST 1 -#endif - -#define SUN6I_AHB_RESET0_CFG_OFFSET 0x2c0 -#define SUN9I_AHB_RESET0_CFG_OFFSET 0x5a0 - -struct ohci_sunxi_cfg { - bool has_reset; - u32 extra_ahb_gate_mask; - u32 extra_usb_gate_mask; - u32 reset0_cfg_offset; -}; - -struct ohci_sunxi_priv { - ohci_t ohci; - struct sunxi_ccm_reg *ccm; - u32 *reset0_cfg; - int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */ - int usb_gate_mask; /* Mask of usb_clk_cfg clk gate bits for this hcd */ - struct phy phy; - const struct ohci_sunxi_cfg *cfg; -}; - -static fdt_addr_t last_ohci_addr = 0; - -static int ohci_usb_probe(struct udevice *dev) -{ - struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev); - struct ohci_sunxi_priv *priv = dev_get_priv(dev); - struct ohci_regs *regs = (struct ohci_regs *)devfdt_get_addr(dev); - int extra_ahb_gate_mask = 0; - u8 reg_mask = 0; - int phys, ret; - - if ((fdt_addr_t)regs > last_ohci_addr) - last_ohci_addr = (fdt_addr_t)regs; - - priv->cfg = (const struct ohci_sunxi_cfg *)dev_get_driver_data(dev); - priv->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - if (IS_ERR(priv->ccm)) - return PTR_ERR(priv->ccm); - - priv->reset0_cfg = (void *)priv->ccm + - priv->cfg->reset0_cfg_offset; - - phys = dev_count_phandle_with_args(dev, "phys", "#phy-cells"); - if (phys < 0) { - phys = 0; - goto no_phy; - } - - ret = generic_phy_get_by_name(dev, "usb", &priv->phy); - if (ret) { - pr_err("failed to get %s usb PHY\n", dev->name); - return ret; - } - - ret = generic_phy_init(&priv->phy); - if (ret) { - pr_err("failed to init %s USB PHY\n", dev->name); - return ret; - } - - ret = generic_phy_power_on(&priv->phy); - if (ret) { - pr_err("failed to power on %s USB PHY\n", dev->name); - return ret; - } - -no_phy: - bus_priv->companion = true; - - /* - * This should go away once we've moved to the driver model for - * clocks resp. phys. - */ - reg_mask = ((uintptr_t)regs - (SUNXI_USB1_BASE + 0x400)) / BASE_DIST; - priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0; - extra_ahb_gate_mask = priv->cfg->extra_ahb_gate_mask; - priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK; - priv->ahb_gate_mask <<= reg_mask * AHB_CLK_DIST; - extra_ahb_gate_mask <<= reg_mask * AHB_CLK_DIST; - priv->usb_gate_mask <<= reg_mask; - - setbits_le32(&priv->ccm->ahb_gate0, - priv->ahb_gate_mask | extra_ahb_gate_mask); - setbits_le32(&priv->ccm->usb_clk_cfg, - priv->usb_gate_mask | priv->cfg->extra_usb_gate_mask); - if (priv->cfg->has_reset) - setbits_le32(priv->reset0_cfg, - priv->ahb_gate_mask | extra_ahb_gate_mask); - - return ohci_register(dev, regs); -} - -static int ohci_usb_remove(struct udevice *dev) -{ - struct ohci_sunxi_priv *priv = dev_get_priv(dev); - fdt_addr_t base_addr = devfdt_get_addr(dev); - int ret; - - if (generic_phy_valid(&priv->phy)) { - ret = generic_phy_exit(&priv->phy); - if (ret) { - pr_err("failed to exit %s USB PHY\n", dev->name); - return ret; - } - } - - ret = ohci_deregister(dev); - if (ret) - return ret; - - if (priv->cfg->has_reset) - clrbits_le32(priv->reset0_cfg, priv->ahb_gate_mask); - /* - * On the A64 CLK_USB_OHCI0 is the parent of CLK_USB_OHCI1, so - * we have to wait with bringing down any clock until the last - * OHCI controller is removed. - */ - if (!priv->cfg->extra_usb_gate_mask || base_addr == last_ohci_addr) { - u32 usb_gate_mask = priv->usb_gate_mask; - - usb_gate_mask |= priv->cfg->extra_usb_gate_mask; - clrbits_le32(&priv->ccm->usb_clk_cfg, usb_gate_mask); - } - - clrbits_le32(&priv->ccm->ahb_gate0, priv->ahb_gate_mask); - - return 0; -} - -static const struct ohci_sunxi_cfg sun4i_a10_cfg = { - .has_reset = false, -}; - -static const struct ohci_sunxi_cfg sun6i_a31_cfg = { - .has_reset = true, - .reset0_cfg_offset = SUN6I_AHB_RESET0_CFG_OFFSET, -}; - -static const struct ohci_sunxi_cfg sun8i_h3_cfg = { - .has_reset = true, - .extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0, - .reset0_cfg_offset = SUN6I_AHB_RESET0_CFG_OFFSET, -}; - -static const struct ohci_sunxi_cfg sun9i_a80_cfg = { - .has_reset = true, - .reset0_cfg_offset = SUN9I_AHB_RESET0_CFG_OFFSET, -}; - -static const struct ohci_sunxi_cfg sun50i_a64_cfg = { - .has_reset = true, - .extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0, - .extra_usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK, - .reset0_cfg_offset = SUN6I_AHB_RESET0_CFG_OFFSET, -}; - -static const struct udevice_id ohci_usb_ids[] = { - { - .compatible = "allwinner,sun4i-a10-ohci", - .data = (ulong)&sun4i_a10_cfg, - }, - { - .compatible = "allwinner,sun5i-a13-ohci", - .data = (ulong)&sun4i_a10_cfg, - }, - { - .compatible = "allwinner,sun6i-a31-ohci", - .data = (ulong)&sun6i_a31_cfg, - }, - { - .compatible = "allwinner,sun7i-a20-ohci", - .data = (ulong)&sun4i_a10_cfg, - }, - { - .compatible = "allwinner,sun8i-a23-ohci", - .data = (ulong)&sun6i_a31_cfg, - }, - { - .compatible = "allwinner,sun8i-a83t-ohci", - .data = (ulong)&sun6i_a31_cfg, - }, - { - .compatible = "allwinner,sun8i-h3-ohci", - .data = (ulong)&sun8i_h3_cfg, - }, - { - .compatible = "allwinner,sun9i-a80-ohci", - .data = (ulong)&sun9i_a80_cfg, - }, - { - .compatible = "allwinner,sun50i-a64-ohci", - .data = (ulong)&sun50i_a64_cfg, - }, - { /* sentinel */ } -}; - -U_BOOT_DRIVER(usb_ohci) = { - .name = "ohci_sunxi", - .id = UCLASS_USB, - .of_match = ohci_usb_ids, - .probe = ohci_usb_probe, - .remove = ohci_usb_remove, - .ops = &ohci_usb_ops, - .platdata_auto_alloc_size = sizeof(struct usb_platdata), - .priv_auto_alloc_size = sizeof(struct ohci_sunxi_priv), - .flags = DM_FLAG_ALLOC_PRIV_DMA, -}; diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index f542a181fa..45eecfeee6 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -16,9 +16,11 @@ * This file is part of the Inventra Controller Driver for Linux. */ #include <common.h> +#include <clk.h> #include <dm.h> #include <generic-phy.h> #include <phy-sun4i-usb.h> +#include <reset.h> #include <asm/arch/cpu.h> #include <asm/arch/clock.h> #include <asm/arch/gpio.h> @@ -80,16 +82,12 @@ struct sunxi_musb_config { struct musb_hdrc_config *config; - bool has_reset; - u8 rst_bit; - u8 clkgate_bit; - u32 off_reset0; }; struct sunxi_glue { struct musb_host_data mdata; - struct sunxi_ccm_reg *ccm; - u32 *reg_reset0; + struct clk clk; + struct reset_ctl rst; struct sunxi_musb_config *cfg; struct device dev; struct phy phy; @@ -296,24 +294,27 @@ static int sunxi_musb_init(struct musb *musb) pr_debug("%s():\n", __func__); - ret = generic_phy_init(&glue->phy); + ret = clk_enable(&glue->clk); if (ret) { - pr_err("failed to init USB PHY\n"); + dev_err(dev, "failed to enable clock\n"); return ret; } - musb->isr = sunxi_musb_interrupt; - - setbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0)); - if (glue->cfg->clkgate_bit) - setbits_le32(&glue->ccm->ahb_gate0, - BIT(glue->cfg->clkgate_bit)); + if (reset_valid(&glue->rst)) { + ret = reset_deassert(&glue->rst); + if (ret) { + dev_err(dev, "failed to deassert reset\n"); + goto err_clk; + } + } - if (glue->cfg->has_reset) - setbits_le32(glue->reg_reset0, BIT(AHB_GATE_OFFSET_USB0)); + ret = generic_phy_init(&glue->phy); + if (ret) { + dev_err(dev, "failed to init USB PHY\n"); + goto err_rst; + } - if (glue->cfg->rst_bit) - setbits_le32(glue->reg_reset0, BIT(glue->cfg->rst_bit)); + musb->isr = sunxi_musb_interrupt; USBC_ConfigFIFO_Base(); USBC_EnableDpDmPullUp(musb->mregs); @@ -329,6 +330,13 @@ static int sunxi_musb_init(struct musb *musb) USBC_ForceVbusValidToHigh(musb->mregs); return 0; + +err_rst: + if (reset_valid(&glue->rst)) + reset_assert(&glue->rst); +err_clk: + clk_disable(&glue->clk); + return ret; } static int sunxi_musb_exit(struct musb *musb) @@ -344,16 +352,9 @@ static int sunxi_musb_exit(struct musb *musb) } } - if (glue->cfg->has_reset) - clrbits_le32(glue->reg_reset0, BIT(AHB_GATE_OFFSET_USB0)); - - if (glue->cfg->rst_bit) - clrbits_le32(glue->reg_reset0, BIT(glue->cfg->rst_bit)); - - clrbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0)); - if (glue->cfg->clkgate_bit) - clrbits_le32(&glue->ccm->ahb_gate0, - BIT(glue->cfg->clkgate_bit)); + if (reset_valid(&glue->rst)) + reset_assert(&glue->rst); + clk_disable(&glue->clk); return 0; } @@ -450,11 +451,17 @@ static int musb_usb_probe(struct udevice *dev) if (!glue->cfg) return -EINVAL; - glue->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - if (IS_ERR(glue->ccm)) - return PTR_ERR(glue->ccm); + ret = clk_get_by_index(dev, 0, &glue->clk); + if (ret) { + dev_err(dev, "failed to get clock\n"); + return ret; + } - glue->reg_reset0 = (void *)glue->ccm + glue->cfg->off_reset0; + ret = reset_get_by_index(dev, 0, &glue->rst); + if (ret && ret != -ENOENT) { + dev_err(dev, "failed to get reset\n"); + return ret; + } ret = generic_phy_get_by_name(dev, "usb", &glue->phy); if (ret) { @@ -462,7 +469,6 @@ static int musb_usb_probe(struct udevice *dev) return ret; } - memset(&pdata, 0, sizeof(pdata)); pdata.power = 250; pdata.platform_ops = &sunxi_musb_ops; @@ -505,21 +511,14 @@ static int musb_usb_remove(struct udevice *dev) static const struct sunxi_musb_config sun4i_a10_cfg = { .config = &musb_config, - .has_reset = false, }; static const struct sunxi_musb_config sun6i_a31_cfg = { .config = &musb_config, - .has_reset = true, - .off_reset0 = OFF_SUN6I_AHB_RESET0, }; static const struct sunxi_musb_config sun8i_h3_cfg = { .config = &musb_config_h3, - .has_reset = true, - .rst_bit = 23, - .clkgate_bit = 23, - .off_reset0 = OFF_SUN6I_AHB_RESET0, }; static const struct udevice_id sunxi_musb_ids[] = { diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index af079a71ee..6033760583 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -11,10 +11,6 @@ * A10 specific configuration */ -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_SUNXI -#endif - /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun50i.h b/include/configs/sun50i.h index 2d73c75b8c..e050a5299f 100644 --- a/include/configs/sun50i.h +++ b/include/configs/sun50i.h @@ -10,11 +10,6 @@ * A64 specific configuration */ -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_SUNXI -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#endif - #ifndef CONFIG_MACH_SUN50I_H6 #define GICD_BASE 0x1c81000 #define GICC_BASE 0x1c82000 diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index c3692caa73..ee42af80d4 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -11,10 +11,6 @@ * High Level Configuration Options */ -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_SUNXI -#endif - /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 1523684fad..1e490daac1 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -14,10 +14,6 @@ * A31 specific configuration */ -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_SUNXI -#endif - #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE #define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index bb8f217b25..d2fd586672 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -12,10 +12,6 @@ * A20 specific configuration */ -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_SUNXI -#endif - #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE #define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */ diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 7dc8693b76..9b4675e4c3 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -12,10 +12,6 @@ * A23 specific configuration */ -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_SUNXI -#endif - /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 9819d9980c..ed0cfc24f5 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -295,7 +295,6 @@ extern int soft_i2c_gpio_scl; #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_OHCI_SUNXI #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 #endif diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h index 370c0a0473..d66432c6e6 100644 --- a/include/dt-bindings/clock/sun50i-a64-ccu.h +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -43,6 +43,8 @@ #ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ #define _DT_BINDINGS_CLK_SUN50I_A64_H_ +#define CLK_PLL_PERIPH0 11 + #define CLK_BUS_MIPI_DSI 28 #define CLK_BUS_CE 29 #define CLK_BUS_DMA 30 diff --git a/include/dt-bindings/clock/sun9i-a80-ccu.h b/include/dt-bindings/clock/sun9i-a80-ccu.h new file mode 100644 index 0000000000..6ea1492a73 --- /dev/null +++ b/include/dt-bindings/clock/sun9i-a80-ccu.h @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_CCU_H_ +#define _DT_BINDINGS_CLOCK_SUN9I_A80_CCU_H_ + +#define CLK_PLL_AUDIO 2 +#define CLK_PLL_PERIPH0 3 + +#define CLK_C0CPUX 12 +#define CLK_C1CPUX 13 + +#define CLK_OUT_A 27 +#define CLK_OUT_B 28 + +#define CLK_NAND0_0 29 +#define CLK_NAND0_1 30 +#define CLK_NAND1_0 31 +#define CLK_NAND1_1 32 +#define CLK_MMC0 33 +#define CLK_MMC0_SAMPLE 34 +#define CLK_MMC0_OUTPUT 35 +#define CLK_MMC1 36 +#define CLK_MMC1_SAMPLE 37 +#define CLK_MMC1_OUTPUT 38 +#define CLK_MMC2 39 +#define CLK_MMC2_SAMPLE 40 +#define CLK_MMC2_OUTPUT 41 +#define CLK_MMC3 42 +#define CLK_MMC3_SAMPLE 43 +#define CLK_MMC3_OUTPUT 44 +#define CLK_TS 45 +#define CLK_SS 46 +#define CLK_SPI0 47 +#define CLK_SPI1 48 +#define CLK_SPI2 49 +#define CLK_SPI3 50 +#define CLK_I2S0 51 +#define CLK_I2S1 52 +#define CLK_SPDIF 53 +#define CLK_SDRAM 54 +#define CLK_DE 55 +#define CLK_EDP 56 +#define CLK_MP 57 +#define CLK_LCD0 58 +#define CLK_LCD1 59 +#define CLK_MIPI_DSI0 60 +#define CLK_MIPI_DSI1 61 +#define CLK_HDMI 62 +#define CLK_HDMI_SLOW 63 +#define CLK_MIPI_CSI 64 +#define CLK_CSI_ISP 65 +#define CLK_CSI_MISC 66 +#define CLK_CSI0_MCLK 67 +#define CLK_CSI1_MCLK 68 +#define CLK_FD 69 +#define CLK_VE 70 +#define CLK_AVS 71 +#define CLK_GPU_CORE 72 +#define CLK_GPU_MEMORY 73 +#define CLK_GPU_AXI 74 +#define CLK_SATA 75 +#define CLK_AC97 76 +#define CLK_MIPI_HSI 77 +#define CLK_GPADC 78 +#define CLK_CIR_TX 79 + +#define CLK_BUS_FD 80 +#define CLK_BUS_VE 81 +#define CLK_BUS_GPU_CTRL 82 +#define CLK_BUS_SS 83 +#define CLK_BUS_MMC 84 +#define CLK_BUS_NAND0 85 +#define CLK_BUS_NAND1 86 +#define CLK_BUS_SDRAM 87 +#define CLK_BUS_MIPI_HSI 88 +#define CLK_BUS_SATA 89 +#define CLK_BUS_TS 90 +#define CLK_BUS_SPI0 91 +#define CLK_BUS_SPI1 92 +#define CLK_BUS_SPI2 93 +#define CLK_BUS_SPI3 94 + +#define CLK_BUS_OTG 95 +#define CLK_BUS_USB 96 +#define CLK_BUS_GMAC 97 +#define CLK_BUS_MSGBOX 98 +#define CLK_BUS_SPINLOCK 99 +#define CLK_BUS_HSTIMER 100 +#define CLK_BUS_DMA 101 + +#define CLK_BUS_LCD0 102 +#define CLK_BUS_LCD1 103 +#define CLK_BUS_EDP 104 +#define CLK_BUS_CSI 105 +#define CLK_BUS_HDMI 106 +#define CLK_BUS_DE 107 +#define CLK_BUS_MP 108 +#define CLK_BUS_MIPI_DSI 109 + +#define CLK_BUS_SPDIF 110 +#define CLK_BUS_PIO 111 +#define CLK_BUS_AC97 112 +#define CLK_BUS_I2S0 113 +#define CLK_BUS_I2S1 114 +#define CLK_BUS_LRADC 115 +#define CLK_BUS_GPADC 116 +#define CLK_BUS_TWD 117 +#define CLK_BUS_CIR_TX 118 + +#define CLK_BUS_I2C0 119 +#define CLK_BUS_I2C1 120 +#define CLK_BUS_I2C2 121 +#define CLK_BUS_I2C3 122 +#define CLK_BUS_I2C4 123 +#define CLK_BUS_UART0 124 +#define CLK_BUS_UART1 125 +#define CLK_BUS_UART2 126 +#define CLK_BUS_UART3 127 +#define CLK_BUS_UART4 128 +#define CLK_BUS_UART5 129 + +#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_CCU_H_ */ diff --git a/include/dt-bindings/clock/sun9i-a80-de.h b/include/dt-bindings/clock/sun9i-a80-de.h new file mode 100644 index 0000000000..3dad6c3cd1 --- /dev/null +++ b/include/dt-bindings/clock/sun9i-a80-de.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_ +#define _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_ + +#define CLK_FE0 0 +#define CLK_FE1 1 +#define CLK_FE2 2 +#define CLK_IEP_DEU0 3 +#define CLK_IEP_DEU1 4 +#define CLK_BE0 5 +#define CLK_BE1 6 +#define CLK_BE2 7 +#define CLK_IEP_DRC0 8 +#define CLK_IEP_DRC1 9 +#define CLK_MERGE 10 + +#define CLK_DRAM_FE0 11 +#define CLK_DRAM_FE1 12 +#define CLK_DRAM_FE2 13 +#define CLK_DRAM_DEU0 14 +#define CLK_DRAM_DEU1 15 +#define CLK_DRAM_BE0 16 +#define CLK_DRAM_BE1 17 +#define CLK_DRAM_BE2 18 +#define CLK_DRAM_DRC0 19 +#define CLK_DRAM_DRC1 20 + +#define CLK_BUS_FE0 21 +#define CLK_BUS_FE1 22 +#define CLK_BUS_FE2 23 +#define CLK_BUS_DEU0 24 +#define CLK_BUS_DEU1 25 +#define CLK_BUS_BE0 26 +#define CLK_BUS_BE1 27 +#define CLK_BUS_BE2 28 +#define CLK_BUS_DRC0 29 +#define CLK_BUS_DRC1 30 + +#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_ */ diff --git a/include/dt-bindings/clock/sun9i-a80-usb.h b/include/dt-bindings/clock/sun9i-a80-usb.h new file mode 100644 index 0000000000..783a60d2cc --- /dev/null +++ b/include/dt-bindings/clock/sun9i-a80-usb.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_USB_H_ +#define _DT_BINDINGS_CLOCK_SUN9I_A80_USB_H_ + +#define CLK_BUS_HCI0 0 +#define CLK_USB_OHCI0 1 +#define CLK_BUS_HCI1 2 +#define CLK_BUS_HCI2 3 +#define CLK_USB_OHCI2 4 + +#define CLK_USB0_PHY 5 +#define CLK_USB1_HSIC 6 +#define CLK_USB1_PHY 7 +#define CLK_USB2_HSIC 8 +#define CLK_USB2_PHY 9 +#define CLK_USB_HSIC 10 + +#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_USB_H_ */ diff --git a/include/dt-bindings/reset/sun9i-a80-ccu.h b/include/dt-bindings/reset/sun9i-a80-ccu.h new file mode 100644 index 0000000000..4b8df4b367 --- /dev/null +++ b/include/dt-bindings/reset/sun9i-a80-ccu.h @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RESET_SUN9I_A80_CCU_H_ +#define _DT_BINDINGS_RESET_SUN9I_A80_CCU_H_ + +#define RST_BUS_FD 0 +#define RST_BUS_VE 1 +#define RST_BUS_GPU_CTRL 2 +#define RST_BUS_SS 3 +#define RST_BUS_MMC 4 +#define RST_BUS_NAND0 5 +#define RST_BUS_NAND1 6 +#define RST_BUS_SDRAM 7 +#define RST_BUS_SATA 8 +#define RST_BUS_TS 9 +#define RST_BUS_SPI0 10 +#define RST_BUS_SPI1 11 +#define RST_BUS_SPI2 12 +#define RST_BUS_SPI3 13 + +#define RST_BUS_OTG 14 +#define RST_BUS_OTG_PHY 15 +#define RST_BUS_MIPI_HSI 16 +#define RST_BUS_GMAC 17 +#define RST_BUS_MSGBOX 18 +#define RST_BUS_SPINLOCK 19 +#define RST_BUS_HSTIMER 20 +#define RST_BUS_DMA 21 + +#define RST_BUS_LCD0 22 +#define RST_BUS_LCD1 23 +#define RST_BUS_EDP 24 +#define RST_BUS_LVDS 25 +#define RST_BUS_CSI 26 +#define RST_BUS_HDMI0 27 +#define RST_BUS_HDMI1 28 +#define RST_BUS_DE 29 +#define RST_BUS_MP 30 +#define RST_BUS_GPU 31 +#define RST_BUS_MIPI_DSI 32 + +#define RST_BUS_SPDIF 33 +#define RST_BUS_AC97 34 +#define RST_BUS_I2S0 35 +#define RST_BUS_I2S1 36 +#define RST_BUS_LRADC 37 +#define RST_BUS_GPADC 38 +#define RST_BUS_CIR_TX 39 + +#define RST_BUS_I2C0 40 +#define RST_BUS_I2C1 41 +#define RST_BUS_I2C2 42 +#define RST_BUS_I2C3 43 +#define RST_BUS_I2C4 44 +#define RST_BUS_UART0 45 +#define RST_BUS_UART1 46 +#define RST_BUS_UART2 47 +#define RST_BUS_UART3 48 +#define RST_BUS_UART4 49 +#define RST_BUS_UART5 50 + +#endif /* _DT_BINDINGS_RESET_SUN9I_A80_CCU_H_ */ diff --git a/include/dt-bindings/reset/sun9i-a80-de.h b/include/dt-bindings/reset/sun9i-a80-de.h new file mode 100644 index 0000000000..2050727701 --- /dev/null +++ b/include/dt-bindings/reset/sun9i-a80-de.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RESET_SUN9I_A80_DE_H_ +#define _DT_BINDINGS_RESET_SUN9I_A80_DE_H_ + +#define RST_FE0 0 +#define RST_FE1 1 +#define RST_FE2 2 +#define RST_DEU0 3 +#define RST_DEU1 4 +#define RST_BE0 5 +#define RST_BE1 6 +#define RST_BE2 7 +#define RST_DRC0 8 +#define RST_DRC1 9 +#define RST_MERGE 10 + +#endif /* _DT_BINDINGS_RESET_SUN9I_A80_DE_H_ */ diff --git a/include/dt-bindings/reset/sun9i-a80-usb.h b/include/dt-bindings/reset/sun9i-a80-usb.h new file mode 100644 index 0000000000..ee492864c2 --- /dev/null +++ b/include/dt-bindings/reset/sun9i-a80-usb.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RESET_SUN9I_A80_USB_H_ +#define _DT_BINDINGS_RESET_SUN9I_A80_USB_H_ + +#define RST_USB0_HCI 0 +#define RST_USB1_HCI 1 +#define RST_USB2_HCI 2 + +#define RST_USB0_PHY 3 +#define RST_USB1_HSIC 4 +#define RST_USB1_PHY 5 +#define RST_USB2_HSIC 6 +#define RST_USB2_PHY 7 + +#endif /* _DT_BINDINGS_RESET_SUN9I_A80_USB_H_ */ diff --git a/include/reset.h b/include/reset.h index bc495a90c2..65aa7a4ce5 100644 --- a/include/reset.h +++ b/include/reset.h @@ -306,4 +306,15 @@ static inline int reset_release_bulk(struct reset_ctl_bulk *bulk) } #endif +/** + * reset_valid() - check if reset is valid + * + * @reset_ctl: the reset to check + * @return TRUE if valid, or FALSE + */ +static inline bool reset_valid(struct reset_ctl *reset_ctl) +{ + return !!reset_ctl->dev; +} + #endif diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index d03ddd876f..8c88031546 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4535,7 +4535,6 @@ CONFIG_USB_EHCI_MX5 CONFIG_USB_EHCI_MXC CONFIG_USB_EHCI_MXS CONFIG_USB_EHCI_SPEAR -CONFIG_USB_EHCI_SUNXI CONFIG_USB_EHCI_TEGRA CONFIG_USB_EHCI_TXFIFO_THRESH CONFIG_USB_EHCI_VCT @@ -4573,7 +4572,6 @@ CONFIG_USB_MUSB_TUSB6010 CONFIG_USB_OHCI_EP93XX CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW -CONFIG_USB_OHCI_SUNXI CONFIG_USB_OTG CONFIG_USB_OTG_BLACKLIST_HUB CONFIG_USB_PHY_TYPE |