diff options
548 files changed, 19614 insertions, 5850 deletions
diff --git a/.gitignore b/.gitignore index b78e2ac681..2e6fde8161 100644 --- a/.gitignore +++ b/.gitignore @@ -79,3 +79,6 @@ cscope.* /onenand_ipl/onenand-ipl* /onenand_ipl/board/*/onenand* /onenand_ipl/board/*/*.S + +# spl ais files +/spl/*.ais diff --git a/MAINTAINERS b/MAINTAINERS index 9b2057481b..4aabcffeff 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -255,12 +255,6 @@ Klaus Heydeck <heydeck@kieback-peter.de> KUP4K MPC855 KUP4X MPC859 -Ilko Iliev <iliev@ronetix.at> - - PM9261 AT91SAM9261 - PM9263 AT91SAM9263 - PM9G45 ARM926EJS (AT91SAM9G45 SoC) - Gary Jennejohn <garyj@denx.de> quad100hd PPC405EP @@ -624,7 +618,6 @@ Rishi Bhattacharya <rishi@ti.com> Andreas Bießmann <andreas.devel@gmail.com> at91rm9200ek at91rm9200 - grasshopper avr32 Cliff Brake <cliff.brake@gmail.com> @@ -667,7 +660,7 @@ Daniel Gorsulowski <daniel.gorsulowski@esd.eu> meesc ARM926EJS (AT91SAM9263 SoC) otc570 ARM926EJS (AT91SAM9263 SoC) -Sedji Gaouaou<sedji.gaouaou@atmel.com> +Bo Shen<voice.shen@atmel.com> at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC) at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC) @@ -690,10 +683,20 @@ Vaibhav Hiremath <hvaibhav@ti.com> am3517_evm ARM ARMV7 (AM35x SoC) +Markus Hubig <mhubig@imko.de> + + STAMP9G20 ARM926EJS + Grazvydas Ignotas <notasas@gmail.com> omap3_pandora ARM ARMV7 (OMAP3xx SoC) +Ilko Iliev <iliev@ronetix.at> + + PM9261 AT91SAM9261 + PM9263 AT91SAM9263 + PM9G45 ARM926EJS (AT91SAM9G45 SoC) + Michael Jones <michael.jones@matrix-vision.de> omap3_mvblx ARM ARMV7 (OMAP3xx SoC) @@ -793,6 +796,10 @@ Linus Walleij <linus.walleij@linaro.org> integratorap various integratorcp various +Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> + + apx4devkit i.MX28 + Luka Perkov <uboot@lukaperkov.net> ib62x0 ARM926EJS @@ -801,6 +808,10 @@ Dave Peverley <dpeverley@mpc-data.co.uk> omap730p2 ARM926EJS +Mathieu Poirier <mathieu.poirier@linaro.org> + + snowball ARM ARMV7 (u8500 SoC) + Stelian Pop <stelian@popies.net> at91sam9260ek ARM926EJS (AT91SAM9260 SoC) @@ -820,9 +831,9 @@ Sricharan R <r.sricharan@ti.com> Thierry Reding <thierry.reding@avionic-design.de> - plutux Tegra2 (ARM7 & A9 Dual Core) - medcom Tegra2 (ARM7 & A9 Dual Core) - tec Tegra2 (ARM7 & A9 Dual Core) + plutux Tegra20 (ARM7 & A9 Dual Core) + medcom Tegra20 (ARM7 & A9 Dual Core) + tec Tegra20 (ARM7 & A9 Dual Core) Christian Riesch <christian.riesch@omicron.at> Manfred Rudigier <manfred.rudigier@omicron.at> @@ -875,6 +886,14 @@ Michael Schwingen <michael@schwingen.org> actux4 xscale/ixp dvlhost xscale/ixp +Matt Sealey <matt@genesi-usa.com> + + efikamx i.MX51 + efikasb i.MX51 + +Bo Shen <voice.shen@atmel.com> + at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC) + Nick Thompson <nick.thompson@gefanuc.com> da830evm ARM926EJS (DA830/OMAP-L137) @@ -900,8 +919,7 @@ Marek Vasut <marek.vasut@gmail.com> vpac270 xscale/pxa zipitz2 xscale/pxa m28evk i.MX28 - efikamx i.MX51 - efikasb i.MX51 + sc_sps_1 i.MX28 Hugo Villeneuve <hugo.villeneuve@lyrtech.com> @@ -926,16 +944,20 @@ Michael Walle <michael@walle.cc> Tom Warren <twarren@nvidia.com> - harmony Tegra2 (ARM7 & A9 Dual Core) - seaboard Tegra2 (ARM7 & A9 Dual Core) + harmony Tegra20 (ARM7 & A9 Dual Core) + seaboard Tegra20 (ARM7 & A9 Dual Core) Tom Warren <twarren@nvidia.com> Stephen Warren <swarren@nvidia.com> - ventana Tegra2 (ARM7 & A9 Dual Core) - paz00 Tegra2 (ARM7 & A9 Dual Core) - trimslice Tegra2 (ARM7 & A9 Dual Core) - whistler Tegra2 (ARM7 & A9 Dual Core) + ventana Tegra20 (ARM7 & A9 Dual Core) + paz00 Tegra20 (ARM7 & A9 Dual Core) + trimslice Tegra20 (ARM7 & A9 Dual Core) + whistler Tegra20 (ARM7 & A9 Dual Core) + +Stephen Warren <swarren@wwwdotorg.org> + + rpi_b BCM2835 (ARM1176) Thomas Weber <weber@corscience.de> @@ -1088,6 +1110,9 @@ Wolfgang Wegner <w.wegner@astro-kom.de> # Board CPU # ######################################################################### +Andreas Bießmann <andreas.devel@googlemail.com> + grasshopper AT32AP7000 + Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> FAVR-32-EZKIT AT32AP7000 @@ -87,9 +87,9 @@ while true ; do -c|--cpu) # echo "Option CPU: argument \`$2'" if [ "$opt_c" ] ; then - opt_c="${opt_c%)} || \$3 == \"$2\")" + opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)" else - opt_c="(\$3 == \"$2\")" + opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)" fi SELECTED='y' shift 2 ;; @@ -211,14 +211,17 @@ RC=0 # Helper funcs for parsing boards.cfg boards_by_field() { + FS="[ \t]+" + [ -n "$3" ] && FS="$3" awk \ -v field="$1" \ -v select="$2" \ + -F "$FS" \ '($1 !~ /^#/ && $field == select) { print $1 }' \ boards.cfg } boards_by_arch() { boards_by_field 2 "$@" ; } -boards_by_cpu() { boards_by_field 3 "$@" ; } +boards_by_cpu() { boards_by_field 3 "$@" "[: \t]+" ; } boards_by_soc() { boards_by_field 6 "$@" ; } ######################################################################### @@ -320,6 +320,9 @@ endif ifeq ($(SOC),exynos) LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o endif +ifeq ($(SOC),tegra20) +LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o +endif LIBS := $(addprefix $(obj),$(sort $(LIBS-y))) .PHONY : $(LIBS) @@ -379,6 +382,15 @@ ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin +# enable combined SPL/u-boot/dtb rules for tegra +ifeq ($(SOC),tegra20) +ifeq ($(CONFIG_OF_SEPARATE),y) +ALL-y += $(obj)u-boot-dtb-tegra.bin +else +ALL-y += $(obj)u-boot-nodtb-tegra.bin +endif +endif + all: $(ALL-y) $(SUBDIR_EXAMPLES) $(obj)u-boot.dtb: $(obj)u-boot @@ -439,7 +451,8 @@ $(obj)u-boot.ubl: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin rm $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin - $(obj)tools/mkimage -s -n /dev/null -T aisimage \ + $(obj)tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(CONFIG_AIS_CONFIG_FILE),"/dev/null") \ + -T aisimage \ -e $(CONFIG_SPL_TEXT_BASE) \ -d $(obj)spl/u-boot-spl.bin \ $(obj)spl/u-boot-spl.ais @@ -448,10 +461,12 @@ $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)spl/u-boot-spl.ais $(obj)spl/u-boot-spl-pad.ais cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.bin > \ $(obj)u-boot.ais - rm $(obj)spl/u-boot-spl{,-pad}.ais + +# Specify the target for use in elftosb call +ELFTOSB_TARGET-$(CONFIG_MX28) = imx28 $(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin - elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd \ + elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \ -o $(obj)u-boot.sb # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. @@ -470,6 +485,20 @@ $(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin conv=notrunc 2>/dev/null cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@ +ifeq ($(SOC),tegra20) +ifeq ($(CONFIG_OF_SEPARATE),y) +$(obj)u-boot-dtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin + cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@ + rm $(obj)spl/u-boot-spl-pad.bin +else +$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin + cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ + rm $(obj)spl/u-boot-spl-pad.bin +endif +endif + ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \ @@ -798,6 +827,7 @@ clobber: tidy @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f @rm -f $(obj)dts/*.tmp + @rm -f $(obj)spl/u-boot-spl{,-pad}.ais mrproper \ distclean: clobber unconfig @@ -744,8 +744,8 @@ The following options need to be configured: - Monitor Functions: Monitor commands can be included or excluded from the build by using the #include files - "config_cmd_all.h" and #undef'ing unwanted - commands, or using "config_cmd_default.h" + <config_cmd_all.h> and #undef'ing unwanted + commands, or using <config_cmd_default.h> and augmenting with additional #define's for wanted commands. @@ -3377,6 +3377,13 @@ Low Level (hardware related) configuration options: Disable PCI-Express on systems where it is supported but not required. +- CONFIG_PCI_ENUM_ONLY + Only scan through and get the devices on the busses. + Don't do any setup work, presumably because someone or + something has already done it, and we don't need to do it + a second time. Useful for platforms that are pre-booted + by coreboot or similar. + - CONFIG_SYS_SRIO: Chip has SRIO or not diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index 986b1f9463..d435e8af69 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -30,6 +30,9 @@ #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#ifdef CONFIG_FSL_ESDHC +#include <fsl_esdhc.h> +#endif #include <netdev.h> #define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel)) @@ -205,7 +208,7 @@ u32 imx_get_uartclk(void) return freq; } -unsigned int mxc_get_main_clock(enum mxc_main_clocks clk) +unsigned int mxc_get_main_clock(enum mxc_main_clock clk) { u32 nfc_pdf, hsp_podf; u32 pll, ret_val = 0, usb_prdf, usb_podf; @@ -270,7 +273,7 @@ unsigned int mxc_get_main_clock(enum mxc_main_clocks clk) return ret_val; } -unsigned int mxc_get_peri_clock(enum mxc_peri_clocks clk) +unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk) { u32 ret_val = 0, pdf, pre_pdf, clk_sel; struct ccm_regs *ccm = @@ -463,7 +466,6 @@ int print_cpuinfo(void) * Initializes on-chip ethernet controllers. * to override, implement board_eth_init() */ - int cpu_eth_init(bd_t *bis) { int rc = -ENODEV; @@ -475,6 +477,17 @@ int cpu_eth_init(bd_t *bis) return rc; } +#ifdef CONFIG_FSL_ESDHC +/* + * Initializes on-chip MMC controllers. + * to override, implement board_mmc_init() + */ +int cpu_mmc_init(bd_t *bis) +{ + return fsl_esdhc_mmc_init(bis); +} +#endif + int get_clocks(void) { #ifdef CONFIG_FSL_ESDHC diff --git a/arch/arm/cpu/arm1136/mx35/iomux.c b/arch/arm/cpu/arm1136/mx35/iomux.c index f93191daef..a302575eda 100644 --- a/arch/arm/cpu/arm1136/mx35/iomux.c +++ b/arch/arm/cpu/arm1136/mx35/iomux.c @@ -44,8 +44,6 @@ enum iomux_reg_addr { #define MUX_INPUT_NUM_MUX \ (((IOMUXSW_INPUT_END - IOMUXSW_INPUT_CTL) >> 2) + 1) -#define PIN_TO_IOMUX_INDEX(pin) ((PIN_TO_IOMUX_PAD(pin) - 0x328) >> 2) - /* * Request ownership for an IO pin. This function has to be the first one * being called before that pin is used. diff --git a/arch/arm/cpu/arm1176/bcm2835/Makefile b/arch/arm/cpu/arm1176/bcm2835/Makefile new file mode 100644 index 0000000000..4ea6d6b89f --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/Makefile @@ -0,0 +1,37 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# version 2 as published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +SOBJS := lowlevel_init.o +COBJS := reset.o timer.o + +SRCS := $(SOBJS:.o=.c) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm1176/bcm2835/config.mk b/arch/arm/cpu/arm1176/bcm2835/config.mk new file mode 100644 index 0000000000..b87ce244c3 --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/config.mk @@ -0,0 +1,19 @@ +# +# (C) Copyright 2012 Stephen Warren +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# version 2 as published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# Don't attempt to override the target CPU/ABI options; +# the Raspberry Pi toolchain does the right thing by default. +PLATFORM_RELFLAGS := $(filter-out -msoft-float,$(PLATFORM_RELFLAGS)) +PLATFORM_CPPFLAGS := $(filter-out -march=armv5t,$(PLATFORM_CPPFLAGS)) diff --git a/arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S b/arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S new file mode 100644 index 0000000000..c7b0843281 --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S @@ -0,0 +1,19 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +.globl lowlevel_init +lowlevel_init: + mov pc, lr diff --git a/arch/arm/cpu/arm1176/bcm2835/reset.c b/arch/arm/cpu/arm1176/bcm2835/reset.c new file mode 100644 index 0000000000..8c37ad9fd4 --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/reset.c @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/wdog.h> + +#define RESET_TIMEOUT 10 + +void reset_cpu(ulong addr) +{ + struct bcm2835_wdog_regs *regs = + (struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR; + uint32_t rstc; + + rstc = readl(®s->rstc); + rstc &= ~BCM2835_WDOG_RSTC_WRCFG_MASK; + rstc |= BCM2835_WDOG_RSTC_WRCFG_FULL_RESET; + + writel(BCM2835_WDOG_PASSWORD | RESET_TIMEOUT, ®s->wdog); + writel(BCM2835_WDOG_PASSWORD | rstc, ®s->rstc); +} diff --git a/arch/arm/cpu/arm1176/bcm2835/timer.c b/arch/arm/cpu/arm1176/bcm2835/timer.c new file mode 100644 index 0000000000..d232d7e067 --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/timer.c @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/timer.h> + +int timer_init(void) +{ + return 0; +} + +ulong get_timer(ulong base) +{ + struct bcm2835_timer_regs *regs = + (struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR; + + return readl(®s->clo) - base; +} + +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} + +void __udelay(unsigned long usec) +{ + ulong endtime; + signed long diff; + + endtime = get_timer(0) + usec; + + do { + ulong now = get_timer(0); + diff = endtime - now; + } while (diff >= 0); +} diff --git a/arch/arm/cpu/arm1176/cpu.c b/arch/arm/cpu/arm1176/cpu.c index c0fd114e16..532a90b546 100644 --- a/arch/arm/cpu/arm1176/cpu.c +++ b/arch/arm/cpu/arm1176/cpu.c @@ -65,3 +65,10 @@ static void cache_flush (void) /* mem barrier to sync things */ asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (0)); } + +int arch_cpu_init(void) +{ + icache_enable(); + + return 0; +} diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c index 974f2880a4..ce7b3c9c24 100644 --- a/arch/arm/cpu/arm720t/cpu.c +++ b/arch/arm/cpu/arm720t/cpu.c @@ -51,6 +51,8 @@ int cleanup_before_linux (void) /* Nothing more needed */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No cleanup before linux for IntegratorAP/CM720T as yet */ +#elif defined(CONFIG_TEGRA) + /* No cleanup before linux for tegra as yet */ #else #error No cleanup_before_linux() defined for this CPU type #endif diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index 464dd30466..c2f898f2cc 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -180,6 +180,9 @@ int timer_init (void) PUT32(T0TC, 0); PUT32(T0TCR, 1); /* enable timer0 */ +#elif defined(CONFIG_TEGRA) + /* No timer routines for tegra as yet */ + lastdec = 0; #else #error No timer_init() defined for this CPU type #endif @@ -282,6 +285,8 @@ void __udelay (unsigned long usec) #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* No timer routines for IntegratorAP/CM720T as yet */ +#elif defined(CONFIG_TEGRA) + /* No timer routines for tegra as yet */ #else #error Timer routines not defined for this CPU type #endif diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 3b97e804a6..2f914e9b4e 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -51,6 +51,16 @@ _start: b reset ldr pc, _irq ldr pc, _fiq +#ifdef CONFIG_SPL_BUILD +_undefined_instruction: .word _undefined_instruction +_software_interrupt: .word _software_interrupt +_prefetch_abort: .word _prefetch_abort +_data_abort: .word _data_abort +_not_used: .word _not_used +_irq: .word _irq +_fiq: .word _fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +#else _undefined_instruction: .word undefined_instruction _software_interrupt: .word software_interrupt _prefetch_abort: .word prefetch_abort @@ -58,6 +68,8 @@ _data_abort: .word data_abort _not_used: .word not_used _irq: .word irq _fiq: .word fiq +_pad: .word 0x12345678 /* now 16*4=64 */ +#endif /* CONFIG_SPL_BUILD */ .balignl 16,0xdeadbeef @@ -77,7 +89,11 @@ _fiq: .word fiq .globl _TEXT_BASE _TEXT_BASE: +#ifdef CONFIG_SPL_BUILD + .word CONFIG_SPL_TEXT_BASE +#else .word CONFIG_SYS_TEXT_BASE +#endif /* * These are defined in the board-specific linker script. @@ -167,6 +183,7 @@ stack_setup: adr r0, _start cmp r0, r6 + moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs @@ -398,6 +415,8 @@ lock_loop: ldr r0, VPBDIV_ADR mov r1, #0x01 /* VPB clock is same as process clock */ str r1, [r0] +#elif defined(CONFIG_TEGRA) + /* No cpu_init_crit for tegra as yet */ #else #error No cpu_init_crit() defined for current CPU type #endif @@ -413,7 +432,7 @@ lock_loop: str r1, [r0] #endif -#ifndef CONFIG_LPC2292 +#if !defined(CONFIG_LPC2292) && !defined(CONFIG_TEGRA) mov ip, lr /* * before relocating, we have to setup RAM timing @@ -427,6 +446,7 @@ lock_loop: mov pc, lr +#ifndef CONFIG_SPL_BUILD /* ************************************************************************* * @@ -589,6 +609,7 @@ fiq: bl do_fiq #endif +#endif /* CONFIG_SPL_BUILD */ #if defined(CONFIG_NETARM) .align 5 @@ -620,6 +641,8 @@ reset_cpu: .globl reset_cpu reset_cpu: mov pc, r0 +#elif defined(CONFIG_TEGRA) + /* No specific reset actions for tegra as yet */ #else #error No reset_cpu() defined for current CPU type #endif diff --git a/arch/arm/cpu/arm720t/tegra20/Makefile b/arch/arm/cpu/arm720t/tegra20/Makefile new file mode 100644 index 0000000000..6e484756dd --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra20/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2010,2011 Nvidia Corporation. +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-y += cpu.o +COBJS-$(CONFIG_SPL_BUILD) += spl.o + +SRCS := $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm720t/tegra20/board.h b/arch/arm/cpu/arm720t/tegra20/board.h new file mode 100644 index 0000000000..61b91c005f --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra20/board.h @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2010-2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +void board_init_uart_f(void); +void gpio_config_uart(void); diff --git a/board/isee/igep0030/config.mk b/arch/arm/cpu/arm720t/tegra20/config.mk index 059a8787f3..62a31d8a62 100644 --- a/board/isee/igep0030/config.mk +++ b/arch/arm/cpu/arm720t/tegra20/config.mk @@ -1,9 +1,9 @@ # -# (C) Copyright 2009 -# ISEE 2007 SL, <www.iseebcn.com> +# (C) Copyright 2010,2011 +# NVIDIA Corporation <www.nvidia.com> # -# IGEP0030 uses OMAP3 (ARM-CortexA8) cpu -# see http://www.ti.com/ for more information on Texas Instruments +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> # # See file CREDITS for list of people who contributed to this # project. @@ -23,11 +23,4 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# Physical Address: -# 8000'0000 (bank0) -# A000/0000 (bank1) -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) - -# For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80008000 +USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c b/arch/arm/cpu/arm720t/tegra20/cpu.c index 1aad3879ee..6d4d66bced 100644 --- a/arch/arm/cpu/armv7/tegra2/ap20.c +++ b/arch/arm/cpu/arm720t/tegra20/cpu.c @@ -22,54 +22,17 @@ */ #include <asm/io.h> -#include <asm/arch/tegra2.h> -#include <asm/arch/ap20.h> +#include <asm/arch/tegra20.h> #include <asm/arch/clk_rst.h> #include <asm/arch/clock.h> -#include <asm/arch/fuse.h> -#include <asm/arch/gp_padctrl.h> #include <asm/arch/pmc.h> #include <asm/arch/pinmux.h> #include <asm/arch/scu.h> -#include <asm/arch/warmboot.h> #include <common.h> - -int tegra_get_chip_type(void) -{ - struct apb_misc_gp_ctlr *gp; - struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE; - uint tegra_sku_id, rev; - - /* - * This is undocumented, Chip ID is bits 15:8 of the register - * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for - * Tegra30 - */ - gp = (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; - rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; - - tegra_sku_id = readl(&fuse->sku_info) & 0xff; - - switch (rev) { - case CHIPID_TEGRA2: - switch (tegra_sku_id) { - case SKU_ID_T20: - return TEGRA_SOC_T20; - case SKU_ID_T25SE: - case SKU_ID_AP25: - case SKU_ID_T25: - case SKU_ID_AP25E: - case SKU_ID_T25E: - return TEGRA_SOC_T25; - } - break; - } - /* unknown sku id */ - return TEGRA_SOC_UNKNOWN; -} +#include "cpu.h" /* Returns 1 if the current CPU executing is a Cortex-A9, else 0 */ -static int ap20_cpu_is_cortexa9(void) +int ap20_cpu_is_cortexa9(void) { u32 id = readb(NV_PA_PG_UP_BASE + PG_UP_TAG_0); return id == (PG_UP_TAG_0_PID_CPU & 0xff); @@ -77,10 +40,8 @@ static int ap20_cpu_is_cortexa9(void) void init_pllx(void) { - struct clk_rst_ctlr *clkrst = - (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; - struct clk_pll_simple *pll = - &clkrst->crc_pll_simple[CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE]; + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_XCPU]; u32 reg; /* If PLLX is already enabled, just return */ @@ -144,14 +105,14 @@ static void enable_cpu_clock(int enable) static int is_cpu_powered(void) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0; } static void remove_cpu_io_clamps(void) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; u32 reg; /* Remove the clamps on the CPU I/O signals */ @@ -165,7 +126,7 @@ static void remove_cpu_io_clamps(void) static void powerup_cpu(void) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; u32 reg; int timeout = IO_STABILIZATION_DELAY; @@ -196,7 +157,7 @@ static void powerup_cpu(void) static void enable_cpu_power_rail(void) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; u32 reg; reg = readl(&pmc->pmc_cntrl); @@ -295,94 +256,3 @@ void halt_avp(void) FLOW_CTLR_HALT_COP_EVENTS); } } - -void enable_scu(void) -{ - struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; - u32 reg; - - /* If SCU already setup/enabled, return */ - if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE) - return; - - /* Invalidate all ways for all processors */ - writel(0xFFFF, &scu->scu_inv_all); - - /* Enable SCU - bit 0 */ - reg = readl(&scu->scu_ctrl); - reg |= SCU_CTRL_ENABLE; - writel(reg, &scu->scu_ctrl); -} - -static u32 get_odmdata(void) -{ - /* - * ODMDATA is stored in the BCT in IRAM by the BootROM. - * The BCT start and size are stored in the BIT in IRAM. - * Read the data @ bct_start + (bct_size - 12). This works - * on T20 and T30 BCTs, which are locked down. If this changes - * in new chips (T114, etc.), we can revisit this algorithm. - */ - - u32 bct_start, odmdata; - - bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR); - odmdata = readl(bct_start + BCT_ODMDATA_OFFSET); - - return odmdata; -} - -void init_pmc_scratch(void) -{ - struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; - u32 odmdata; - int i; - - /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */ - for (i = 0; i < 23; i++) - writel(0, &pmc->pmc_scratch1+i); - - /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */ - odmdata = get_odmdata(); - writel(odmdata, &pmc->pmc_scratch20); - -#ifdef CONFIG_TEGRA2_LP0 - /* save Sdram params to PMC 2, 4, and 24 for WB0 */ - warmboot_save_sdram_params(); -#endif -} - -void tegra2_start(void) -{ - struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; - - /* If we are the AVP, start up the first Cortex-A9 */ - if (!ap20_cpu_is_cortexa9()) { - /* enable JTAG */ - writel(0xC0, &pmt->pmt_cfg_ctl); - - /* - * If we are ARM7 - give it a different stack. We are about to - * start up the A9 which will want to use this one. - */ - asm volatile("mov sp, %0\n" - : : "r"(AVP_EARLY_BOOT_STACK_LIMIT)); - - start_cpu((u32)_start); - halt_avp(); - /* not reached */ - } - - /* Init PMC scratch memory */ - init_pmc_scratch(); - - enable_scu(); - - /* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */ - asm volatile( - "mrc p15, 0, r0, c1, c0, 1\n" - "orr r0, r0, #0x41\n" - "mcr p15, 0, r0, c1, c0, 1\n"); - - /* FIXME: should have ap20's L2 disabled too? */ -} diff --git a/arch/arm/cpu/arm720t/tegra20/cpu.h b/arch/arm/cpu/arm720t/tegra20/cpu.h new file mode 100644 index 0000000000..6804cd7a3d --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra20/cpu.h @@ -0,0 +1,100 @@ +/* + * (C) Copyright 2010-2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <asm/types.h> + +/* Stabilization delays, in usec */ +#define PLL_STABILIZATION_DELAY (300) +#define IO_STABILIZATION_DELAY (1000) + +#define NVBL_PLLP_KHZ (216000) + +#define PLLX_ENABLED (1 << 30) +#define CCLK_BURST_POLICY 0x20008888 +#define SUPER_CCLK_DIVIDER 0x80000000 + +/* Calculate clock fractional divider value from ref and target frequencies */ +#define CLK_DIVIDER(REF, FREQ) ((((REF) * 2) / FREQ) - 2) + +/* Calculate clock frequency value from reference and clock divider value */ +#define CLK_FREQUENCY(REF, REG) (((REF) * 2) / (REG + 2)) + +/* AVP/CPU ID */ +#define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */ +#define PG_UP_TAG_0 0x0 + +#define CORESIGHT_UNLOCK 0xC5ACCE55; + +/* AP20-Specific Base Addresses */ + +/* AP20 Base physical address of SDRAM. */ +#define AP20_BASE_PA_SDRAM 0x00000000 +/* AP20 Base physical address of internal SRAM. */ +#define AP20_BASE_PA_SRAM 0x40000000 +/* AP20 Size of internal SRAM (256KB). */ +#define AP20_BASE_PA_SRAM_SIZE 0x00040000 +/* AP20 Base physical address of flash. */ +#define AP20_BASE_PA_NOR_FLASH 0xD0000000 +/* AP20 Base physical address of boot information table. */ +#define AP20_BASE_PA_BOOT_INFO AP20_BASE_PA_SRAM + +/* + * Super-temporary stacks for EXTREMELY early startup. The values chosen for + * these addresses must be valid on ALL SOCs because this value is used before + * we are able to differentiate between the SOC types. + * + * NOTE: The since CPU's stack will eventually be moved from IRAM to SDRAM, its + * stack is placed below the AVP stack. Once the CPU stack has been moved, + * the AVP is free to use the IRAM the CPU stack previously occupied if + * it should need to do so. + * + * NOTE: In multi-processor CPU complex configurations, each processor will have + * its own stack of size CPU_EARLY_BOOT_STACK_SIZE. CPU 0 will have a + * limit of CPU_EARLY_BOOT_STACK_LIMIT. Each successive CPU will have a + * stack limit that is CPU_EARLY_BOOT_STACK_SIZE less then the previous + * CPU. + */ + +/* Common AVP early boot stack limit */ +#define AVP_EARLY_BOOT_STACK_LIMIT \ + (AP20_BASE_PA_SRAM + (AP20_BASE_PA_SRAM_SIZE/2)) +/* Common AVP early boot stack size */ +#define AVP_EARLY_BOOT_STACK_SIZE 0x1000 +/* Common CPU early boot stack limit */ +#define CPU_EARLY_BOOT_STACK_LIMIT \ + (AVP_EARLY_BOOT_STACK_LIMIT - AVP_EARLY_BOOT_STACK_SIZE) +/* Common CPU early boot stack size */ +#define CPU_EARLY_BOOT_STACK_SIZE 0x1000 + +#define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100) +#define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0) +#define CSITE_CPU_DBG1_LAR (NV_PA_CSITE_BASE + 0x12FB0) + +#define FLOW_CTLR_HALT_COP_EVENTS (NV_PA_FLOW_BASE + 4) +#define FLOW_MODE_STOP 2 +#define HALT_COP_EVENT_JTAG (1 << 28) +#define HALT_COP_EVENT_IRQ_1 (1 << 11) +#define HALT_COP_EVENT_FIQ_1 (1 << 9) + +void start_cpu(u32 reset_vector); +int ap20_cpu_is_cortexa9(void); +void halt_avp(void) __attribute__ ((noreturn)); diff --git a/arch/arm/cpu/arm720t/tegra20/spl.c b/arch/arm/cpu/arm720t/tegra20/spl.c new file mode 100644 index 0000000000..6c16dce299 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra20/spl.c @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2012 + * NVIDIA Inc, <www.nvidia.com> + * + * Allen Martin <amartin@nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/u-boot.h> +#include <asm/utils.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> +#include <nand.h> +#include <mmc.h> +#include <fat.h> +#include <version.h> +#include <i2c.h> +#include <image.h> +#include <malloc.h> +#include <linux/compiler.h> +#include "board.h" +#include "cpu.h" + +#include <asm/io.h> +#include <asm/arch/tegra20.h> +#include <asm/arch/clk_rst.h> +#include <asm/arch/clock.h> +#include <asm/arch/pmc.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/scu.h> +#include <common.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Define global data structure pointer to it*/ +static gd_t gdata __attribute__ ((section(".data"))); +static bd_t bdata __attribute__ ((section(".data"))); + +inline void hang(void) +{ + puts("### ERROR ### Please RESET the board ###\n"); + for (;;) + ; +} + +void board_init_f(ulong dummy) +{ + board_init_uart_f(); + + /* Initialize periph GPIOs */ +#ifdef CONFIG_SPI_UART_SWITCH + gpio_early_init_uart(); +#else + gpio_config_uart(); +#endif + + /* + * We call relocate_code() with relocation target same as the + * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting + * skipped. Instead, only .bss initialization will happen. That's + * all we need + */ + debug(">>board_init_f()\n"); + relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE); +} + +/* This requires UART clocks to be enabled */ +static void preloader_console_init(void) +{ + const char *u_boot_rev = U_BOOT_VERSION; + + gd = &gdata; + gd->bd = &bdata; + gd->flags |= GD_FLG_RELOC; + gd->baudrate = CONFIG_BAUDRATE; + + serial_init(); /* serial communications setup */ + + gd->have_console = 1; + + /* Avoid a second "U-Boot" coming from this string */ + u_boot_rev = &u_boot_rev[7]; + + printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE, + U_BOOT_TIME); +} + +void board_init_r(gd_t *id, ulong dummy) +{ + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + + /* enable JTAG */ + writel(0xC0, &pmt->pmt_cfg_ctl); + + debug(">>spl:board_init_r()\n"); + + mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, + CONFIG_SYS_SPL_MALLOC_SIZE); + +#ifdef CONFIG_SPL_BOARD_INIT + spl_board_init(); +#endif + + clock_early_init(); + serial_init(); + preloader_console_init(); + + start_cpu((u32)CONFIG_SYS_TEXT_BASE); + halt_avp(); + /* not reached */ +} + +int board_usb_init(const void *blob) +{ + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile index f333753c71..346e58faee 100644 --- a/arch/arm/cpu/arm926ejs/at91/Makefile +++ b/arch/arm/cpu/arm926ejs/at91/Makefile @@ -35,6 +35,7 @@ COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o +COBJS-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o COBJS-$(CONFIG_AT91_EFLASH) += eflash.o COBJS-$(CONFIG_AT91_LED) += led.o COBJS-y += clock.o diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index 62f76fa8e3..19ec615c72 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -158,6 +158,10 @@ void at91_spi1_hw_init(unsigned long cs_mask) #ifdef CONFIG_MACB void at91_macb_hw_init(void) { + /* Enable EMAC clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* ETXCK_EREFCK */ at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* ERXDV */ at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* ERX0 */ diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c new file mode 100644 index 0000000000..6d77219d0d --- /dev/null +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -0,0 +1,232 @@ +/* + * Copyright (C) 2012 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> + +unsigned int get_chip_id(void) +{ + /* The 0x40 is the offset of cidr in DBGU */ + return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK; +} + +unsigned int get_extension_chip_id(void) +{ + /* The 0x44 is the offset of exid in DBGU */ + return readl(ATMEL_BASE_DBGU + 0x44); +} + +unsigned int has_emac1() +{ + return cpu_is_at91sam9x25(); +} + +unsigned int has_emac0() +{ + return !(cpu_is_at91sam9g15()); +} + +unsigned int has_lcdc() +{ + return cpu_is_at91sam9g15() || cpu_is_at91sam9g35() + || cpu_is_at91sam9x35(); +} + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_at91sam9x5()) { + switch (extension_id) { + case ARCH_EXID_AT91SAM9G15: + return CONFIG_SYS_AT91_G15_CPU_NAME; + case ARCH_EXID_AT91SAM9G25: + return CONFIG_SYS_AT91_G25_CPU_NAME; + case ARCH_EXID_AT91SAM9G35: + return CONFIG_SYS_AT91_G35_CPU_NAME; + case ARCH_EXID_AT91SAM9X25: + return CONFIG_SYS_AT91_X25_CPU_NAME; + case ARCH_EXID_AT91SAM9X35: + return CONFIG_SYS_AT91_X35_CPU_NAME; + default: + return CONFIG_SYS_AT91_UNKNOWN_CPU; + } + } else { + return CONFIG_SYS_AT91_UNKNOWN_CPU; + } +} + +void at91_seriald_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +void at91_serial0_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */ + + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +#ifdef CONFIG_ATMEL_SPI +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); + if (cs_mask & (1 << 1)) + at91_set_b_periph(AT91_PIO_PORTA, 7, 0); + if (cs_mask & (1 << 2)) + at91_set_b_periph(AT91_PIO_PORTA, 1, 0); + if (cs_mask & (1 << 3)) + at91_set_b_periph(AT91_PIO_PORTB, 3, 0); + if (cs_mask & (1 << 4)) + at91_set_pio_output(AT91_PIO_PORTA, 14, 0); + if (cs_mask & (1 << 5)) + at91_set_pio_output(AT91_PIO_PORTA, 7, 0); + if (cs_mask & (1 << 6)) + at91_set_pio_output(AT91_PIO_PORTA, 1, 0); + if (cs_mask & (1 << 7)) + at91_set_pio_output(AT91_PIO_PORTB, 3, 0); +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_b_periph(AT91_PIO_PORTA, 8, 0); + if (cs_mask & (1 << 1)) + at91_set_b_periph(AT91_PIO_PORTA, 0, 0); + if (cs_mask & (1 << 2)) + at91_set_b_periph(AT91_PIO_PORTA, 31, 0); + if (cs_mask & (1 << 3)) + at91_set_b_periph(AT91_PIO_PORTA, 30, 0); + if (cs_mask & (1 << 4)) + at91_set_pio_output(AT91_PIO_PORTA, 8, 0); + if (cs_mask & (1 << 5)) + at91_set_pio_output(AT91_PIO_PORTA, 0, 0); + if (cs_mask & (1 << 6)) + at91_set_pio_output(AT91_PIO_PORTA, 31, 0); + if (cs_mask & (1 << 7)) + at91_set_pio_output(AT91_PIO_PORTA, 30, 0); +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + + if (has_emac0()) { + /* Enable EMAC0 clock */ + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + /* EMAC0 pins setup */ + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */ + } + + if (has_emac1()) { + /* Enable EMAC1 clock */ + writel(1 << ATMEL_ID_EMAC1, &pmc->pcer); + /* EMAC1 pins setup */ + at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */ + at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */ + at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */ + at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */ + at91_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */ + at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */ + at91_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */ + at91_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */ + at91_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */ + at91_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */ + } + +#ifndef CONFIG_RMII + /* Only emac0 support MII */ + if (has_emac0()) { + at91_set_b_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ + at91_set_b_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ + at91_set_b_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ + at91_set_b_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ + at91_set_b_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ + at91_set_b_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ + at91_set_b_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ + at91_set_b_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ + } +#endif +} +#endif diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c index a7085deac0..dc5c6c4b0b 100644 --- a/arch/arm/cpu/arm926ejs/at91/clock.c +++ b/arch/arm/cpu/arm926ejs/at91/clock.c @@ -154,7 +154,8 @@ int at91_clock_init(unsigned long main_clock) * For now, assume this parentage won't change. */ mckr = readl(&pmc->mckr); -#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ + || defined(CONFIG_AT91SAM9X5) /* plla divisor by 2 */ gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); #endif @@ -168,7 +169,14 @@ int at91_clock_init(unsigned long main_clock) freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq; if (mckr & AT91_PMC_MCKR_MDIV_MASK) freq /= 2; /* processor clock division */ -#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ + || defined(CONFIG_AT91SAM9X5) + /* mdiv <==> divisor + * 0 <==> 1 + * 1 <==> 2 + * 2 <==> 4 + * 3 <==> 3 + */ gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4) ? freq / 3 diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile index da7efac085..c91928e71d 100644 --- a/arch/arm/cpu/arm926ejs/davinci/Makefile +++ b/arch/arm/cpu/arm926ejs/davinci/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS-y += cpu.o misc.o timer.o psc.o pinmux.o +COBJS-y += cpu.o misc.o timer.o psc.o pinmux.o reset.o COBJS-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o COBJS-$(CONFIG_SOC_DM355) += dm355.o COBJS-$(CONFIG_SOC_DM365) += dm365.o @@ -42,8 +42,6 @@ COBJS-$(CONFIG_SOC_DM365) += dm365_lowlevel.o COBJS-$(CONFIG_SOC_DA8XX) += da850_lowlevel.o endif -SOBJS = reset.o - ifndef CONFIG_SKIP_LOWLEVEL_INIT SOBJS += lowlevel_init.o endif diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c index 6cb857aef5..b31add8deb 100644 --- a/arch/arm/cpu/arm926ejs/davinci/cpu.c +++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c @@ -117,6 +117,17 @@ int clk_get(enum davinci_clk_ids id) out: return pll_out; } + +int set_cpu_clk_info(void) +{ + gd->bd->bi_arm_freq = clk_get(DAVINCI_ARM_CLKID) / 1000000; + /* DDR PHY uses an x2 input clock */ + gd->bd->bi_ddr_freq = cpu_is_da830() ? 0 : + (clk_get(DAVINCI_DDR_CLKID) / 1000000); + gd->bd->bi_dsp_freq = 0; + return 0; +} + #else /* CONFIG_SOC_DA8XX */ static unsigned pll_div(volatile void *pllbase, unsigned offset) @@ -187,16 +198,9 @@ unsigned int davinci_clk_get(unsigned int div) return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, div) * 1000000; } #endif -#endif /* !CONFIG_SOC_DA8XX */ int set_cpu_clk_info(void) { -#ifdef CONFIG_SOC_DA8XX - gd->bd->bi_arm_freq = clk_get(DAVINCI_ARM_CLKID) / 1000000; - /* DDR PHY uses an x2 input clock */ - gd->bd->bi_ddr_freq = clk_get(0x10001) / 1000000; -#else - unsigned int pllbase = DAVINCI_PLL_CNTRL0_BASE; #if defined(CONFIG_SOC_DM365) pllbase = DAVINCI_PLL_CNTRL1_BASE; @@ -215,10 +219,12 @@ int set_cpu_clk_info(void) pllbase = DAVINCI_PLL_CNTRL0_BASE; #endif gd->bd->bi_ddr_freq = pll_sysclk_mhz(pllbase, DDR_PLLDIV) / 2; -#endif + return 0; } +#endif /* !CONFIG_SOC_DA8XX */ + /* * Initializes on-chip ethernet controllers. * to override, implement board_eth_init() diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c index df7d6a24ba..ff2e2e33df 100644 --- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c +++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c @@ -190,13 +190,21 @@ int da850_ddr_setup(void) setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK); setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); - - setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN); } - + setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN); writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); - clrbits_le32(&davinci_syscfg1_regs->ddr_slew, - (1 << DDR_SLEW_CMOSEN_BIT)); + + if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) { + /* DDR2 */ + clrbits_le32(&davinci_syscfg1_regs->ddr_slew, + (1 << DDR_SLEW_DDR_PDENA_BIT) | + (1 << DDR_SLEW_CMOSEN_BIT)); + } else { + /* MOBILE DDR */ + setbits_le32(&davinci_syscfg1_regs->ddr_slew, + (1 << DDR_SLEW_DDR_PDENA_BIT) | + (1 << DDR_SLEW_CMOSEN_BIT)); + } /* * SDRAM Configuration Register (SDCR): @@ -216,7 +224,11 @@ int da850_ddr_setup(void) writel(tmp, &dv_ddr2_regs_ctrl->sdbcr); /* write memory configuration and timing */ - writel(CONFIG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2); + if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) { + /* MOBILE DDR only*/ + writel(CONFIG_SYS_DA850_DDR2_SDBCR2, + &dv_ddr2_regs_ctrl->sdbcr2); + } writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); @@ -240,7 +252,7 @@ int da850_ddr_setup(void) /* disable self refresh */ clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, - DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_LPMODEN); + DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN); writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); return 0; diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c index fa07fb591f..133265e5b0 100644 --- a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c +++ b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c @@ -35,6 +35,11 @@ const struct pinmux_config spi1_pins_scs0[] = { }; /* UART pin muxer settings */ +const struct pinmux_config uart0_pins_txrx[] = { + { pinmux(3), 2, 4 }, /* UART0_RXD */ + { pinmux(3), 2, 5 }, /* UART0_TXD */ +}; + const struct pinmux_config uart1_pins_txrx[] = { { pinmux(4), 2, 6 }, /* UART1_RXD */ { pinmux(4), 2, 7 }, /* UART1_TXD */ @@ -169,3 +174,14 @@ const struct pinmux_config emifa_pins_nor[] = { { pinmux(12), 1, 6 }, /* EMA_A[1] */ { pinmux(12), 1, 7 }, /* EMA_A[0] */ }; + +/* MMC0 pin muxer settings */ +const struct pinmux_config mmc0_pins[] = { + { pinmux(10), 2, 0 }, /* MMCSD0_CLK */ + { pinmux(10), 2, 1 }, /* MMCSD0_CMD */ + { pinmux(10), 2, 2 }, /* MMCSD0_DAT_0 */ + { pinmux(10), 2, 3 }, /* MMCSD0_DAT_1 */ + { pinmux(10), 2, 4 }, /* MMCSD0_DAT_2 */ + { pinmux(10), 2, 5 }, /* MMCSD0_DAT_3 */ + /* DA850 supports only 4-bit mode, remaining pins are not configured */ +}; diff --git a/arch/arm/cpu/arm926ejs/davinci/psc.c b/arch/arm/cpu/arm926ejs/davinci/psc.c index 3e925181ea..2ffb42abca 100644 --- a/arch/arm/cpu/arm926ejs/davinci/psc.c +++ b/arch/arm/cpu/arm926ejs/davinci/psc.c @@ -128,6 +128,11 @@ void lpsc_syncreset(unsigned int id) lpsc_transition(id, 0x01); } +void lpsc_disable(unsigned int id) +{ + lpsc_transition(id, 0x0); +} + /* Not all DaVinci chips have a DSP power domain. */ #ifdef CONFIG_SOC_DM644X diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.S b/arch/arm/cpu/arm926ejs/davinci/reset.S deleted file mode 100644 index ba0a7c3b4b..0000000000 --- a/arch/arm/cpu/arm926ejs/davinci/reset.S +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Processor reset using WDT for TI TMS320DM644x SoC. - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * ----------------------------------------------------- - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -.globl reset_cpu -reset_cpu: - ldr r0, WDT_TGCR - mov r1, $0x08 - str r1, [r0] - ldr r1, [r0] - orr r1, r1, $0x03 - str r1, [r0] - mov r1, $0 - ldr r0, WDT_TIM12 - str r1, [r0] - ldr r0, WDT_TIM34 - str r1, [r0] - ldr r0, WDT_PRD12 - str r1, [r0] - ldr r0, WDT_PRD34 - str r1, [r0] - ldr r0, WDT_TCR - ldr r1, [r0] - orr r1, r1, $0x40 - str r1, [r0] - ldr r0, WDT_WDTCR - ldr r1, [r0] - orr r1, r1, $0x4000 - str r1, [r0] - ldr r1, WDTCR_VAL1 - str r1, [r0] - ldr r1, WDTCR_VAL2 - str r1, [r0] - /* Write an invalid value to the WDKEY field to trigger - * an immediate watchdog reset */ - mov r1, $0x4000 - str r1, [r0] - nop - nop - nop - nop -reset_cpu_loop: - b reset_cpu_loop - -WDT_TGCR: - .word 0x01c21c24 -WDT_TIM12: - .word 0x01c21c10 -WDT_TIM34: - .word 0x01c21c14 -WDT_PRD12: - .word 0x01c21c18 -WDT_PRD34: - .word 0x01c21c1c -WDT_TCR: - .word 0x01c21c20 -WDT_WDTCR: - .word 0x01c21c28 -WDTCR_VAL1: - .word 0xa5c64000 -WDTCR_VAL2: - .word 0xda7e4000 diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.c b/arch/arm/cpu/arm926ejs/davinci/reset.c new file mode 100644 index 0000000000..968fb035c8 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/davinci/reset.c @@ -0,0 +1,33 @@ +/* + * Processor reset using WDT. + * + * Copyright (C) 2012 Dmitry Bondar <bond@inmys.ru> + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. +*/ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/timer_defs.h> +#include <asm/arch/hardware.h> + +void reset_cpu(unsigned long a) +{ + struct davinci_timer *const wdttimer = + (struct davinci_timer *)DAVINCI_TIMER1_BASE; + writel(0x08, &wdttimer->tgcr); + writel(readl(&wdttimer->tgcr) | 0x03, &wdttimer->tgcr); + writel(0, &wdttimer->tim12); + writel(0, &wdttimer->tim34); + writel(0, &wdttimer->prd12); + writel(0, &wdttimer->prd34); + writel(readl(&wdttimer->tcr) | 0x40, &wdttimer->tcr); + writel(readl(&wdttimer->wdtcr) | 0x4000, &wdttimer->wdtcr); + writel(0xa5c64000, &wdttimer->wdtcr); + writel(0xda7e4000, &wdttimer->wdtcr); + writel(0x4000, &wdttimer->wdtcr); + while (1) + /*nothing*/; +} diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c index 74632e5161..03c85c87fb 100644 --- a/arch/arm/cpu/arm926ejs/davinci/spl.c +++ b/arch/arm/cpu/arm926ejs/davinci/spl.c @@ -28,6 +28,7 @@ #include <ns16550.h> #include <malloc.h> #include <spi_flash.h> +#include <mmc.h> #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT @@ -74,12 +75,7 @@ void board_init_f(ulong dummy) void board_init_r(gd_t *id, ulong dummy) { -#ifdef CONFIG_SPL_NAND_LOAD - nand_init(); - puts("Nand boot...\n"); - nand_boot(); -#endif -#ifdef CONFIG_SPL_SPI_LOAD +#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN); @@ -90,7 +86,19 @@ void board_init_r(gd_t *id, ulong dummy) serial_init(); /* serial communications setup */ gd->have_console = 1; +#endif + +#ifdef CONFIG_SPL_NAND_LOAD + nand_init(); + puts("Nand boot...\n"); + nand_boot(); +#endif +#ifdef CONFIG_SPL_SPI_LOAD puts("SPI boot...\n"); spi_boot(); #endif +#ifdef CONFIG_SPL_MMC_LOAD + puts("MMC boot...\n"); + spl_mmc_load(); +#endif } diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c index 8b07dae2b9..a412a8fe20 100644 --- a/arch/arm/cpu/arm926ejs/mx25/generic.c +++ b/arch/arm/cpu/arm926ejs/mx25/generic.c @@ -186,6 +186,14 @@ int print_cpuinfo(void) } #endif +void enable_caches(void) +{ +#ifndef CONFIG_SYS_DCACHE_OFF + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +#endif +} + int cpu_eth_init(bd_t *bis) { #if defined(CONFIG_FEC_MXC) diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c index 65c4813784..41bb84bb6e 100644 --- a/arch/arm/cpu/arm926ejs/mx27/generic.c +++ b/arch/arm/cpu/arm926ejs/mx27/generic.c @@ -24,6 +24,7 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> +#include <asm/arch/gpio.h> #ifdef CONFIG_MXC_MMC #include <asm/arch/mxcmmc.h> #endif @@ -209,7 +210,7 @@ int cpu_mmc_init(bd_t *bis) void imx_gpio_mode(int gpio_mode) { - struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE; + struct gpio_port_regs *regs = (struct gpio_port_regs *)IMX_GPIO_BASE; unsigned int pin = gpio_mode & GPIO_PIN_MASK; unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; @@ -228,11 +229,11 @@ void imx_gpio_mode(int gpio_mode) /* Data direction */ if (gpio_mode & GPIO_OUT) { - writel(readl(®s->port[port].ddir) | 1 << pin, - ®s->port[port].ddir); + writel(readl(®s->port[port].gpio_dir) | 1 << pin, + ®s->port[port].gpio_dir); } else { - writel(readl(®s->port[port].ddir) & ~(1 << pin), - ®s->port[port].ddir); + writel(readl(®s->port[port].gpio_dir) & ~(1 << pin), + ®s->port[port].gpio_dir); } /* Primary / alternate function */ diff --git a/arch/arm/cpu/arm926ejs/mx28/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile index 674a3af1be..eeecf89f8b 100644 --- a/arch/arm/cpu/arm926ejs/mx28/Makefile +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = clock.o mx28.o iomux.o timer.o +COBJS = clock.o mxs.o iomux.o timer.o ifdef CONFIG_SPL_BUILD COBJS += spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o diff --git a/arch/arm/cpu/arm926ejs/mx28/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c index 0439f9c0ea..bfea6abeb0 100644 --- a/arch/arm/cpu/arm926ejs/mx28/clock.c +++ b/arch/arm/cpu/arm926ejs/mxs/clock.c @@ -43,8 +43,8 @@ static uint32_t mx28_get_pclk(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clkctrl, clkseq, div; uint8_t clkfrac, frac; @@ -75,8 +75,8 @@ static uint32_t mx28_get_pclk(void) static uint32_t mx28_get_hclk(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t div; uint32_t clkctrl; @@ -93,8 +93,8 @@ static uint32_t mx28_get_hclk(void) static uint32_t mx28_get_emiclk(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clkctrl, clkseq, div; uint8_t clkfrac, frac; @@ -118,8 +118,8 @@ static uint32_t mx28_get_emiclk(void) static uint32_t mx28_get_gpmiclk(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clkctrl, clkseq, div; uint8_t clkfrac, frac; @@ -145,8 +145,8 @@ static uint32_t mx28_get_gpmiclk(void) */ void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t div; int io_reg; @@ -178,8 +178,8 @@ void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq) */ static uint32_t mx28_get_ioclk(enum mxs_ioclock io) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint8_t ret; int io_reg; @@ -199,15 +199,15 @@ static uint32_t mx28_get_ioclk(enum mxs_ioclock io) */ void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clk, clkreg; if (ssp > MXC_SSPCLK3) return; clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + - (ssp * sizeof(struct mx28_register_32)); + (ssp * sizeof(struct mxs_register_32)); clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE); while (readl(clkreg) & CLKCTRL_SSP_CLKGATE) @@ -243,8 +243,8 @@ void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal) */ static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; uint32_t clkreg; uint32_t clk, tmp; @@ -256,7 +256,7 @@ static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp) return XTAL_FREQ_KHZ; clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + - (ssp * sizeof(struct mx28_register_32)); + (ssp * sizeof(struct mxs_register_32)); tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK; @@ -273,12 +273,12 @@ static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp) */ void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq) { - struct mx28_ssp_regs *ssp_regs; + struct mxs_ssp_regs *ssp_regs; const uint32_t sspclk = mx28_get_sspclk(bus); uint32_t reg; uint32_t divide, rate, tgtclk; - ssp_regs = (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000)); + ssp_regs = (struct mxs_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000)); /* * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)), diff --git a/arch/arm/cpu/arm926ejs/mx28/iomux.c b/arch/arm/cpu/arm926ejs/mxs/iomux.c index 12916b6d60..73f1446907 100644 --- a/arch/arm/cpu/arm926ejs/mx28/iomux.c +++ b/arch/arm/cpu/arm926ejs/mxs/iomux.c @@ -43,7 +43,7 @@ int mxs_iomux_setup_pad(iomux_cfg_t pad) { u32 reg, ofs, bp, bm; void *iomux_base = (void *)MXS_PINCTRL_BASE; - struct mx28_register_32 *mxs_reg; + struct mxs_register_32 *mxs_reg; /* muxsel */ ofs = 0x100; @@ -70,7 +70,7 @@ int mxs_iomux_setup_pad(iomux_cfg_t pad) /* vol */ if (PAD_VOL_VALID(pad)) { bp = PAD_PIN(pad) % 8 * 4 + 2; - mxs_reg = (struct mx28_register_32 *)(iomux_base + ofs); + mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs); if (PAD_VOL(pad)) writel(1 << bp, &mxs_reg->reg_set); else @@ -82,7 +82,7 @@ int mxs_iomux_setup_pad(iomux_cfg_t pad) ofs = PULL_OFFSET; ofs += PAD_BANK(pad) * 0x10; bp = PAD_PIN(pad); - mxs_reg = (struct mx28_register_32 *)(iomux_base + ofs); + mxs_reg = (struct mxs_register_32 *)(iomux_base + ofs); if (PAD_PULL(pad)) writel(1 << bp, &mxs_reg->reg_set); else diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c index ff25772099..6ce8019b83 100644 --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c @@ -41,8 +41,8 @@ DECLARE_GLOBAL_DATA_PTR; /* 1 second delay should be plenty of time for block reset. */ #define RESET_MAX_TIMEOUT 1000000 -#define MX28_BLOCK_SFTRST (1 << 31) -#define MX28_BLOCK_CLKGATE (1 << 30) +#define MXS_BLOCK_SFTRST (1 << 31) +#define MXS_BLOCK_CLKGATE (1 << 30) /* Lowlevel init isn't used on i.MX28, so just have a dummy here */ inline void lowlevel_init(void) {} @@ -51,10 +51,10 @@ void reset_cpu(ulong ignored) __attribute__((noreturn)); void reset_cpu(ulong ignored) { - struct mx28_rtc_regs *rtc_regs = - (struct mx28_rtc_regs *)MXS_RTC_BASE; - struct mx28_lcdif_regs *lcdif_regs = - (struct mx28_lcdif_regs *)MXS_LCDIF_BASE; + struct mxs_rtc_regs *rtc_regs = + (struct mxs_rtc_regs *)MXS_RTC_BASE; + struct mxs_lcdif_regs *lcdif_regs = + (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; /* * Shut down the LCD controller as it interferes with BootROM boot mode @@ -81,7 +81,8 @@ void enable_caches(void) #endif } -int mx28_wait_mask_set(struct mx28_register_32 *reg, uint32_t mask, int timeout) +int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned + int timeout) { while (--timeout) { if ((readl(®->reg) & mask) == mask) @@ -92,7 +93,8 @@ int mx28_wait_mask_set(struct mx28_register_32 *reg, uint32_t mask, int timeout) return !timeout; } -int mx28_wait_mask_clr(struct mx28_register_32 *reg, uint32_t mask, int timeout) +int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned + int timeout) { while (--timeout) { if ((readl(®->reg) & mask) == 0) @@ -103,34 +105,34 @@ int mx28_wait_mask_clr(struct mx28_register_32 *reg, uint32_t mask, int timeout) return !timeout; } -int mx28_reset_block(struct mx28_register_32 *reg) +int mxs_reset_block(struct mxs_register_32 *reg) { /* Clear SFTRST */ - writel(MX28_BLOCK_SFTRST, ®->reg_clr); + writel(MXS_BLOCK_SFTRST, ®->reg_clr); - if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) return 1; /* Clear CLKGATE */ - writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + writel(MXS_BLOCK_CLKGATE, ®->reg_clr); /* Set SFTRST */ - writel(MX28_BLOCK_SFTRST, ®->reg_set); + writel(MXS_BLOCK_SFTRST, ®->reg_set); /* Wait for CLKGATE being set */ - if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + if (mxs_wait_mask_set(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) return 1; /* Clear SFTRST */ - writel(MX28_BLOCK_SFTRST, ®->reg_clr); + writel(MXS_BLOCK_SFTRST, ®->reg_clr); - if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) return 1; /* Clear CLKGATE */ - writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + writel(MXS_BLOCK_CLKGATE, ®->reg_clr); - if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + if (mxs_wait_mask_clr(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) return 1; return 0; @@ -155,8 +157,8 @@ int arch_misc_init(void) int arch_cpu_init(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; extern uint32_t _start; mx28_fixup_vt((uint32_t)&_start); @@ -188,14 +190,48 @@ int arch_cpu_init(void) } #if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) +static const char *get_cpu_type(void) { - struct mx28_spl_data *data = (struct mx28_spl_data *) - ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf); + struct mxs_digctl_regs *digctl_regs = + (struct mxs_digctl_regs *)MXS_DIGCTL_BASE; + + switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) { + case HW_DIGCTL_CHIPID_MX28: + return "28"; + default: + return "??"; + } +} - printf("Freescale i.MX28 family at %d MHz\n", - mxc_get_clock(MXC_ARM_CLK) / 1000000); - printf("BOOT: %s\n", mx28_boot_modes[data->boot_mode_idx].mode); +static const char *get_cpu_rev(void) +{ + struct mxs_digctl_regs *digctl_regs = + (struct mxs_digctl_regs *)MXS_DIGCTL_BASE; + uint8_t rev = readl(&digctl_regs->hw_digctl_chipid) & 0x000000FF; + + switch (readl(&digctl_regs->hw_digctl_chipid) & HW_DIGCTL_CHIPID_MASK) { + case HW_DIGCTL_CHIPID_MX28: + switch (rev) { + case 0x1: + return "1.2"; + default: + return "??"; + } + default: + return "??"; + } +} + +int print_cpuinfo(void) +{ + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); + + printf("CPU: Freescale i.MX%s rev%s at %d MHz\n", + get_cpu_type(), + get_cpu_rev(), + mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("BOOT: %s\n", mxs_boot_modes[data->boot_mode_idx].mode); return 0; } #endif @@ -212,11 +248,11 @@ int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) /* * Initializes on-chip ethernet controllers. */ -#ifdef CONFIG_CMD_NET +#if defined(CONFIG_MX28) && defined(CONFIG_CMD_NET) int cpu_eth_init(bd_t *bis) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; /* Turn on ENET clocks */ clrbits_le32(&clkctrl_regs->hw_clkctrl_enet, @@ -257,15 +293,15 @@ void mx28_adjust_mac(int dev_id, unsigned char *mac) #define MXS_OCOTP_MAX_TIMEOUT 1000000 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { - struct mx28_ocotp_regs *ocotp_regs = - (struct mx28_ocotp_regs *)MXS_OCOTP_BASE; + struct mxs_ocotp_regs *ocotp_regs = + (struct mxs_ocotp_regs *)MXS_OCOTP_BASE; uint32_t data; memset(mac, 0, 6); writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set); - if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY, + if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY, MXS_OCOTP_MAX_TIMEOUT)) { printf("MXS FEC: Can't get MAC from OCOTP\n"); return; @@ -286,13 +322,13 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) } #endif -int mx28_dram_init(void) +int mxs_dram_init(void) { - struct mx28_spl_data *data = (struct mx28_spl_data *) - ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf); + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); if (data->mem_dram_size == 0) { - printf("MX28:\n" + printf("MXS:\n" "Error, the RAM size passed up from SPL is 0!\n"); hang(); } diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28_init.h b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h index e3a4493fbd..2ddc5bc0c6 100644 --- a/arch/arm/cpu/arm926ejs/mx28/mx28_init.h +++ b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h @@ -28,18 +28,18 @@ void early_delay(int delay); -void mx28_power_init(void); +void mxs_power_init(void); #ifdef CONFIG_SPL_MX28_PSWITCH_WAIT -void mx28_power_wait_pswitch(void); +void mxs_power_wait_pswitch(void); #else -static inline void mx28_power_wait_pswitch(void) { } +static inline void mxs_power_wait_pswitch(void) { } #endif -void mx28_mem_init(void); -uint32_t mx28_mem_get_size(void); +void mxs_mem_init(void); +uint32_t mxs_mem_get_size(void); -void mx28_lradc_init(void); -void mx28_lradc_enable_batt_measurement(void); +void mxs_lradc_init(void); +void mxs_lradc_enable_batt_measurement(void); #endif /* __M28_INIT_H__ */ diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index a6dfca3f51..ddafddbf2b 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -26,12 +26,11 @@ #include <common.h> #include <config.h> #include <asm/io.h> -#include <asm/arch/iomux-mx28.h> #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> #include <asm/gpio.h> -#include "mx28_init.h" +#include "mxs_init.h" /* * This delay function is intended to be used only in early stage of boot, where @@ -58,7 +57,7 @@ const iomux_cfg_t iomux_boot[] = { MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, }; -uint8_t mx28_get_bootmode_index(void) +uint8_t mxs_get_bootmode_index(void) { uint8_t bootmode = 0; int i; @@ -83,31 +82,31 @@ uint8_t mx28_get_bootmode_index(void) bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; - for (i = 0; i < ARRAY_SIZE(mx28_boot_modes); i++) { - masked = bootmode & mx28_boot_modes[i].boot_mask; - if (masked == mx28_boot_modes[i].boot_pads) + for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) { + masked = bootmode & mxs_boot_modes[i].boot_mask; + if (masked == mxs_boot_modes[i].boot_pads) break; } return i; } -void mx28_common_spl_init(const iomux_cfg_t *iomux_setup, +void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, const unsigned int iomux_size) { - struct mx28_spl_data *data = (struct mx28_spl_data *) - ((CONFIG_SYS_TEXT_BASE - sizeof(struct mx28_spl_data)) & ~0xf); - uint8_t bootmode = mx28_get_bootmode_index(); + struct mxs_spl_data *data = (struct mxs_spl_data *) + ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); + uint8_t bootmode = mxs_get_bootmode_index(); mxs_iomux_setup_multiple_pads(iomux_setup, iomux_size); - mx28_power_init(); + mxs_power_init(); - mx28_mem_init(); - data->mem_dram_size = mx28_mem_get_size(); + mxs_mem_init(); + data->mem_dram_size = mxs_mem_get_size(); data->boot_mode_idx = bootmode; - mx28_power_wait_pswitch(); + mxs_power_wait_pswitch(); } /* Support aparatus */ diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c index 88a603c11d..d90f0a1310 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c @@ -28,11 +28,11 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include "mx28_init.h" +#include "mxs_init.h" -void mx28_lradc_init(void) +void mxs_lradc_init(void) { - struct mx28_lradc_regs *regs = (struct mx28_lradc_regs *)MXS_LRADC_BASE; + struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; writel(LRADC_CTRL0_SFTRST, ®s->hw_lradc_ctrl0_clr); writel(LRADC_CTRL0_CLKGATE, ®s->hw_lradc_ctrl0_clr); @@ -49,9 +49,9 @@ void mx28_lradc_init(void) LRADC_CTRL4_LRADC6SELECT_CHANNEL10); } -void mx28_lradc_enable_batt_measurement(void) +void mxs_lradc_enable_batt_measurement(void) { - struct mx28_lradc_regs *regs = (struct mx28_lradc_regs *)MXS_LRADC_BASE; + struct mxs_lradc_regs *regs = (struct mxs_lradc_regs *)MXS_LRADC_BASE; /* Check if the channel is present at all. */ if (!(readl(®s->hw_lradc_status) & LRADC_STATUS_CHANNEL7_PRESENT)) diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index e17a4d7c7f..e693145b90 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -26,12 +26,11 @@ #include <common.h> #include <config.h> #include <asm/io.h> -#include <asm/arch/iomux-mx28.h> #include <asm/arch/imx-regs.h> -#include "mx28_init.h" +#include "mxs_init.h" -uint32_t dram_vals[] = { +static uint32_t mx28_dram_vals[] = { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, @@ -82,26 +81,26 @@ uint32_t dram_vals[] = { 0x00000000, 0x00010001 }; -void __mx28_adjust_memory_params(uint32_t *dram_vals) +void __mxs_adjust_memory_params(uint32_t *dram_vals) { } -void mx28_adjust_memory_params(uint32_t *dram_vals) - __attribute__((weak, alias("__mx28_adjust_memory_params"))); +void mxs_adjust_memory_params(uint32_t *dram_vals) + __attribute__((weak, alias("__mxs_adjust_memory_params"))); -void init_m28_200mhz_ddr2(void) +void init_mx28_200mhz_ddr2(void) { int i; - mx28_adjust_memory_params(dram_vals); + mxs_adjust_memory_params(mx28_dram_vals); - for (i = 0; i < ARRAY_SIZE(dram_vals); i++) - writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); + for (i = 0; i < ARRAY_SIZE(mx28_dram_vals); i++) + writel(mx28_dram_vals[i], MXS_DRAM_BASE + (4 * i)); } -void mx28_mem_init_clock(void) +void mxs_mem_init_clock(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; /* Gate EMI clock */ writeb(CLKCTRL_FRAC_CLKGATE, @@ -129,10 +128,10 @@ void mx28_mem_init_clock(void) early_delay(10000); } -void mx28_mem_setup_cpu_and_hbus(void) +void mxs_mem_setup_cpu_and_hbus(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; /* Set fractional divider for ref_cpu to 480 * 18 / 19 = 454MHz * and ungate CPU clock */ @@ -161,10 +160,10 @@ void mx28_mem_setup_cpu_and_hbus(void) early_delay(15000); } -void mx28_mem_setup_vdda(void) +void mxs_mem_setup_vdda(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; writel((0xc << POWER_VDDACTRL_TRG_OFFSET) | (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) | @@ -172,10 +171,10 @@ void mx28_mem_setup_vdda(void) &power_regs->hw_power_vddactrl); } -void mx28_mem_setup_vddd(void) +void mxs_mem_setup_vddd(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) | (0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) | @@ -183,7 +182,7 @@ void mx28_mem_setup_vddd(void) &power_regs->hw_power_vdddctrl); } -uint32_t mx28_mem_get_size(void) +uint32_t mxs_mem_get_size(void) { uint32_t sz, da; uint32_t *vt = (uint32_t *)0x20; @@ -202,12 +201,12 @@ uint32_t mx28_mem_get_size(void) return sz; } -void mx28_mem_init(void) +void mxs_mem_init(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; - struct mx28_pinctrl_regs *pinctrl_regs = - (struct mx28_pinctrl_regs *)MXS_PINCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_pinctrl_regs *pinctrl_regs = + (struct mxs_pinctrl_regs *)MXS_PINCTRL_BASE; /* Set DDR2 mode */ writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2, @@ -219,9 +218,9 @@ void mx28_mem_init(void) early_delay(11000); - mx28_mem_init_clock(); + mxs_mem_init_clock(); - mx28_mem_setup_vdda(); + mxs_mem_setup_vdda(); /* * Configure the DRAM registers @@ -230,7 +229,7 @@ void mx28_mem_init(void) /* Clear START bit from DRAM_CTL16 */ clrbits_le32(MXS_DRAM_BASE + 0x40, 1); - init_m28_200mhz_ddr2(); + init_mx28_200mhz_ddr2(); /* Clear SREFRESH bit from DRAM_CTL17 */ clrbits_le32(MXS_DRAM_BASE + 0x44, 1); @@ -242,9 +241,9 @@ void mx28_mem_init(void) while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20))) ; - mx28_mem_setup_vddd(); + mxs_mem_setup_vddd(); early_delay(10000); - mx28_mem_setup_cpu_and_hbus(); + mxs_mem_setup_cpu_and_hbus(); } diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index 4b09b0c3ba..4b917bd186 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -28,22 +28,22 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include "mx28_init.h" +#include "mxs_init.h" -void mx28_power_clock2xtal(void) +void mxs_power_clock2xtal(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; /* Set XTAL as CPU reference clock */ writel(CLKCTRL_CLKSEQ_BYPASS_CPU, &clkctrl_regs->hw_clkctrl_clkseq_set); } -void mx28_power_clock2pll(void) +void mxs_power_clock2pll(void) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0, CLKCTRL_PLL0CTRL0_POWER); @@ -52,10 +52,10 @@ void mx28_power_clock2pll(void) CLKCTRL_CLKSEQ_BYPASS_CPU); } -void mx28_power_clear_auto_restart(void) +void mxs_power_clear_auto_restart(void) { - struct mx28_rtc_regs *rtc_regs = - (struct mx28_rtc_regs *)MXS_RTC_BASE; + struct mxs_rtc_regs *rtc_regs = + (struct mxs_rtc_regs *)MXS_RTC_BASE; writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr); while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST) @@ -85,10 +85,10 @@ void mx28_power_clear_auto_restart(void) ; } -void mx28_power_set_linreg(void) +void mxs_power_set_linreg(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Set linear regulator 25mV below switching converter */ clrsetbits_le32(&power_regs->hw_power_vdddctrl, @@ -104,10 +104,10 @@ void mx28_power_set_linreg(void) POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); } -int mx28_get_batt_volt(void) +int mxs_get_batt_volt(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t volt = readl(&power_regs->hw_power_battmonitor); volt &= POWER_BATTMONITOR_BATT_VAL_MASK; volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET; @@ -115,16 +115,16 @@ int mx28_get_batt_volt(void) return volt; } -int mx28_is_batt_ready(void) +int mxs_is_batt_ready(void) { - return (mx28_get_batt_volt() >= 3600); + return (mxs_get_batt_volt() >= 3600); } -int mx28_is_batt_good(void) +int mxs_is_batt_good(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; - uint32_t volt = mx28_get_batt_volt(); + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + uint32_t volt = mxs_get_batt_volt(); if ((volt >= 2400) && (volt <= 4300)) return 1; @@ -145,7 +145,7 @@ int mx28_is_batt_good(void) early_delay(500000); - volt = mx28_get_batt_volt(); + volt = mxs_get_batt_volt(); if (volt >= 3500) return 0; @@ -160,10 +160,10 @@ int mx28_is_batt_good(void) return 0; } -void mx28_power_setup_5v_detect(void) +void mxs_power_setup_5v_detect(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Start 5V detection */ clrsetbits_le32(&power_regs->hw_power_5vctrl, @@ -172,10 +172,10 @@ void mx28_power_setup_5v_detect(void) POWER_5VCTRL_PWRUP_VBUS_CMPS); } -void mx28_src_power_init(void) +void mxs_src_power_init(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Improve efficieny and reduce transient ripple */ writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST | @@ -203,10 +203,10 @@ void mx28_src_power_init(void) clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); } -void mx28_power_init_4p2_params(void) +void mxs_power_init_4p2_params(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Setup 4P2 parameters */ clrsetbits_le32(&power_regs->hw_power_dcdc4p2, @@ -227,10 +227,10 @@ void mx28_power_init_4p2_params(void) 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } -void mx28_enable_4p2_dcdc_input(int xfer) +void mxs_enable_4p2_dcdc_input(int xfer) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo; uint32_t prev_5v_brnout, prev_5v_droop; @@ -323,10 +323,10 @@ void mx28_enable_4p2_dcdc_input(int xfer) POWER_CTRL_ENIRQ_VDD5V_DROOP); } -void mx28_power_init_4p2_regulator(void) +void mxs_power_init_4p2_regulator(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp, tmp2; setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2); @@ -346,7 +346,7 @@ void mx28_power_init_4p2_regulator(void) * gradually to avoid large inrush current from the 5V cable which can * cause transients/problems */ - mx28_enable_4p2_dcdc_input(0); + mxs_enable_4p2_dcdc_input(0); if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { /* @@ -407,17 +407,17 @@ void mx28_power_init_4p2_regulator(void) writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); } -void mx28_power_init_dcdc_4p2_source(void) +void mxs_power_init_dcdc_4p2_source(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; if (!(readl(&power_regs->hw_power_dcdc4p2) & POWER_DCDC4P2_ENABLE_DCDC)) { hang(); } - mx28_enable_4p2_dcdc_input(1); + mxs_enable_4p2_dcdc_input(1); if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) { clrbits_le32(&power_regs->hw_power_dcdc4p2, @@ -429,10 +429,10 @@ void mx28_power_init_dcdc_4p2_source(void) } } -void mx28_power_enable_4p2(void) +void mxs_power_enable_4p2(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t vdddctrl, vddactrl, vddioctrl; uint32_t tmp; @@ -451,11 +451,11 @@ void mx28_power_enable_4p2(void) setbits_le32(&power_regs->hw_power_vddioctrl, POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT); - mx28_power_init_4p2_params(); - mx28_power_init_4p2_regulator(); + mxs_power_init_4p2_params(); + mxs_power_init_4p2_regulator(); /* Shutdown battery (none present) */ - if (!mx28_is_batt_ready()) { + if (!mxs_is_batt_ready()) { clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK); writel(POWER_CTRL_DCDC4P2_BO_IRQ, @@ -464,7 +464,7 @@ void mx28_power_enable_4p2(void) &power_regs->hw_power_ctrl_clr); } - mx28_power_init_dcdc_4p2_source(); + mxs_power_init_dcdc_4p2_source(); writel(vdddctrl, &power_regs->hw_power_vdddctrl); early_delay(20); @@ -488,10 +488,10 @@ void mx28_power_enable_4p2(void) &power_regs->hw_power_charge_clr); } -void mx28_boot_valid_5v(void) +void mxs_boot_valid_5v(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V @@ -508,22 +508,22 @@ void mx28_boot_valid_5v(void) writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ, &power_regs->hw_power_ctrl_clr); - mx28_power_enable_4p2(); + mxs_power_enable_4p2(); } -void mx28_powerdown(void) +void mxs_powerdown(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset); writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF, &power_regs->hw_power_reset); } -void mx28_batt_boot(void) +void mxs_batt_boot(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT); clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC); @@ -542,7 +542,7 @@ void mx28_batt_boot(void) clrsetbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS); - mx28_power_set_linreg(); + mxs_power_set_linreg(); clrbits_le32(&power_regs->hw_power_vdddctrl, POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG); @@ -564,10 +564,10 @@ void mx28_batt_boot(void) 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } -void mx28_handle_5v_conflict(void) +void mxs_handle_5v_conflict(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp; setbits_le32(&power_regs->hw_power_vddioctrl, @@ -577,52 +577,56 @@ void mx28_handle_5v_conflict(void) tmp = readl(&power_regs->hw_power_sts); if (tmp & POWER_STS_VDDIO_BO) { - mx28_powerdown(); + /* + * VDDIO has a brownout, then the VDD5V_GT_VDDIO becomes + * unreliable + */ + mxs_powerdown(); break; } if (tmp & POWER_STS_VDD5V_GT_VDDIO) { - mx28_boot_valid_5v(); + mxs_boot_valid_5v(); break; } else { - mx28_powerdown(); + mxs_powerdown(); break; } if (tmp & POWER_STS_PSWITCH_MASK) { - mx28_batt_boot(); + mxs_batt_boot(); break; } } } -void mx28_5v_boot(void) +void mxs_5v_boot(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID, * but their implementation always returns 1 so we omit it here. */ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { - mx28_boot_valid_5v(); + mxs_boot_valid_5v(); return; } early_delay(1000); if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { - mx28_boot_valid_5v(); + mxs_boot_valid_5v(); return; } - mx28_handle_5v_conflict(); + mxs_handle_5v_conflict(); } -void mx28_init_batt_bo(void) +void mxs_init_batt_bo(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; /* Brownout at 3V */ clrsetbits_le32(&power_regs->hw_power_battmonitor, @@ -633,10 +637,10 @@ void mx28_init_batt_bo(void) writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr); } -void mx28_switch_vddd_to_dcdc_source(void) +void mxs_switch_vddd_to_dcdc_source(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; clrsetbits_le32(&power_regs->hw_power_vdddctrl, POWER_VDDDCTRL_LINREG_OFFSET_MASK, @@ -647,51 +651,48 @@ void mx28_switch_vddd_to_dcdc_source(void) POWER_VDDDCTRL_DISABLE_STEPPING); } -void mx28_power_configure_power_source(void) +void mxs_power_configure_power_source(void) { int batt_ready, batt_good; - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; - struct mx28_lradc_regs *lradc_regs = - (struct mx28_lradc_regs *)MXS_LRADC_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; + struct mxs_lradc_regs *lradc_regs = + (struct mxs_lradc_regs *)MXS_LRADC_BASE; - mx28_src_power_init(); - - batt_ready = mx28_is_batt_ready(); + mxs_src_power_init(); if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { - batt_good = mx28_is_batt_good(); + batt_ready = mxs_is_batt_ready(); if (batt_ready) { /* 5V source detected, good battery detected. */ - mx28_batt_boot(); + mxs_batt_boot(); } else { - if (batt_good) { - /* 5V source detected, low battery detceted. */ - } else { + batt_good = mxs_is_batt_good(); + if (!batt_good) { /* 5V source detected, bad battery detected. */ writel(LRADC_CONVERSION_AUTOMATIC, &lradc_regs->hw_lradc_conversion_clr); clrbits_le32(&power_regs->hw_power_battmonitor, POWER_BATTMONITOR_BATT_VAL_MASK); } - mx28_5v_boot(); + mxs_5v_boot(); } } else { /* 5V not detected, booting from battery. */ - mx28_batt_boot(); + mxs_batt_boot(); } - mx28_power_clock2pll(); + mxs_power_clock2pll(); - mx28_init_batt_bo(); + mxs_init_batt_bo(); - mx28_switch_vddd_to_dcdc_source(); + mxs_switch_vddd_to_dcdc_source(); } -void mx28_enable_output_rail_protection(void) +void mxs_enable_output_rail_protection(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr); @@ -706,17 +707,17 @@ void mx28_enable_output_rail_protection(void) POWER_VDDIOCTRL_PWDN_BRNOUT); } -int mx28_get_vddio_power_source_off(void) +int mxs_get_vddio_power_source_off(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp; if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) { tmp = readl(&power_regs->hw_power_vddioctrl); if (tmp & POWER_VDDIOCTRL_DISABLE_FET) { if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == - POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) { return 1; } } @@ -724,7 +725,7 @@ int mx28_get_vddio_power_source_off(void) if (!(readl(&power_regs->hw_power_5vctrl) & POWER_5VCTRL_ENABLE_DCDC)) { if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) == - POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) { + POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS) { return 1; } } @@ -734,10 +735,10 @@ int mx28_get_vddio_power_source_off(void) } -int mx28_get_vddd_power_source_off(void) +int mxs_get_vddd_power_source_off(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t tmp; tmp = readl(&power_regs->hw_power_vdddctrl); @@ -765,21 +766,21 @@ int mx28_get_vddd_power_source_off(void) return 0; } -void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout) +void mxs_power_set_vddio(uint32_t new_target, uint32_t new_brownout) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t cur_target, diff, bo_int = 0; uint32_t powered_by_linreg = 0; - new_brownout = new_target - new_brownout; + new_brownout = (new_target - new_brownout + 25) / 50; cur_target = readl(&power_regs->hw_power_vddioctrl); cur_target &= POWER_VDDIOCTRL_TRG_MASK; cur_target *= 50; /* 50 mV step*/ cur_target += 2800; /* 2800 mV lowest */ - powered_by_linreg = mx28_get_vddio_power_source_off(); + powered_by_linreg = mxs_get_vddio_power_source_off(); if (new_target > cur_target) { if (powered_by_linreg) { @@ -858,25 +859,25 @@ void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout) } clrsetbits_le32(&power_regs->hw_power_vddioctrl, - POWER_VDDDCTRL_BO_OFFSET_MASK, - new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET); + POWER_VDDIOCTRL_BO_OFFSET_MASK, + new_brownout << POWER_VDDIOCTRL_BO_OFFSET_OFFSET); } -void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout) +void mxs_power_set_vddd(uint32_t new_target, uint32_t new_brownout) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; uint32_t cur_target, diff, bo_int = 0; uint32_t powered_by_linreg = 0; - new_brownout = new_target - new_brownout; + new_brownout = (new_target - new_brownout + 12) / 25; cur_target = readl(&power_regs->hw_power_vdddctrl); cur_target &= POWER_VDDDCTRL_TRG_MASK; cur_target *= 25; /* 25 mV step*/ cur_target += 800; /* 800 mV lowest */ - powered_by_linreg = mx28_get_vddd_power_source_off(); + powered_by_linreg = mxs_get_vddd_power_source_off(); if (new_target > cur_target) { if (powered_by_linreg) { bo_int = readl(&power_regs->hw_power_vdddctrl); @@ -959,31 +960,31 @@ void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout) new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET); } -void mx28_setup_batt_detect(void) +void mxs_setup_batt_detect(void) { - mx28_lradc_init(); - mx28_lradc_enable_batt_measurement(); + mxs_lradc_init(); + mxs_lradc_enable_batt_measurement(); early_delay(10); } -void mx28_power_init(void) +void mxs_power_init(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; - mx28_power_clock2xtal(); - mx28_power_clear_auto_restart(); - mx28_power_set_linreg(); - mx28_power_setup_5v_detect(); + mxs_power_clock2xtal(); + mxs_power_clear_auto_restart(); + mxs_power_set_linreg(); + mxs_power_setup_5v_detect(); - mx28_setup_batt_detect(); + mxs_setup_batt_detect(); - mx28_power_configure_power_source(); - mx28_enable_output_rail_protection(); + mxs_power_configure_power_source(); + mxs_enable_output_rail_protection(); - mx28_power_set_vddio(3300, 3150); + mxs_power_set_vddio(3300, 3150); - mx28_power_set_vddd(1350, 1200); + mxs_power_set_vddd(1350, 1200); writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ | @@ -996,10 +997,10 @@ void mx28_power_init(void) } #ifdef CONFIG_SPL_MX28_PSWITCH_WAIT -void mx28_power_wait_pswitch(void) +void mxs_power_wait_pswitch(void) { - struct mx28_power_regs *power_regs = - (struct mx28_power_regs *)MXS_POWER_BASE; + struct mxs_power_regs *power_regs = + (struct mxs_power_regs *)MXS_POWER_BASE; while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK)) ; diff --git a/arch/arm/cpu/arm926ejs/mx28/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index e572b786bb..7ccd337174 100644 --- a/arch/arm/cpu/arm926ejs/mx28/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -180,14 +180,6 @@ _reset: orr r0,r0,#0xd3 msr cpsr,r0 - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - bl board_init_ll /* @@ -207,40 +199,6 @@ _reset: pop {r0-r12,r14} bx lr -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -cpu_init_crit: - /* - * flush v4 I/D caches - */ - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ - bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */ - orr r0, r0, #0x00000002 /* set bit 2 (A) Align */ - orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ - mcr p15, 0, r0, c1, c0, 0 - - mov pc, lr /* back to my caller */ - - .align 5 -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - _hang: ldr sp, _TEXT_BASE /* switch to abort stack */ 1: diff --git a/arch/arm/cpu/arm926ejs/mx28/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c index 5b73f4a2b3..4ed75e604c 100644 --- a/arch/arm/cpu/arm926ejs/mx28/timer.c +++ b/arch/arm/cpu/arm926ejs/mxs/timer.c @@ -62,11 +62,11 @@ static inline unsigned long us_to_tick(unsigned long us) int timer_init(void) { - struct mx28_timrot_regs *timrot_regs = - (struct mx28_timrot_regs *)MXS_TIMROT_BASE; + struct mxs_timrot_regs *timrot_regs = + (struct mxs_timrot_regs *)MXS_TIMROT_BASE; /* Reset Timers and Rotary Encoder module */ - mx28_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); + mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); /* Set fixed_count to 0 */ writel(0, &timrot_regs->hw_timrot_fixed_count0); @@ -84,8 +84,8 @@ int timer_init(void) unsigned long long get_ticks(void) { - struct mx28_timrot_regs *timrot_regs = - (struct mx28_timrot_regs *)MXS_TIMROT_BASE; + struct mxs_timrot_regs *timrot_regs = + (struct mxs_timrot_regs *)MXS_TIMROT_BASE; /* Current tick value */ uint32_t now = readl(&timrot_regs->hw_timrot_running_count0); diff --git a/board/denx/m28evk/u-boot.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd index c60615a456..c60615a456 100644 --- a/board/denx/m28evk/u-boot.bd +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd diff --git a/arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds index 0fccd52968..f8ea38c03d 100644 --- a/arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -37,7 +37,7 @@ SECTIONS . = ALIGN(4); .text : { - arch/arm/cpu/arm926ejs/mx28/start.o (.text) + arch/arm/cpu/arm926ejs/mxs/start.o (.text) *(.text) } diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 6b2addca11..4fdbee4bc0 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -32,8 +32,12 @@ COBJS += cache_v7.o COBJS += cpu.o COBJS += syslib.o +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20),) +SOBJS += lowlevel_init.o +endif + SRCS := $(START:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) START := $(addprefix $(obj),$(START)) all: $(obj).depend $(START) $(LIB) diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 71309a7f47..b387ac27ec 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -17,15 +17,22 @@ */ #include <common.h> +#include <errno.h> #include <asm/arch/cpu.h> #include <asm/arch/hardware.h> #include <asm/arch/omap.h> #include <asm/arch/ddr_defs.h> #include <asm/arch/clock.h> +#include <asm/arch/gpio.h> #include <asm/arch/mmc_host_def.h> -#include <asm/arch/common_def.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> #include <asm/omap_common.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> DECLARE_GLOBAL_DATA_PTR; @@ -33,6 +40,78 @@ struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE; struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; +static const struct gpio_bank gpio_bank_am33xx[4] = { + { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; + +/* MII mode defines */ +#define MII_MODE_ENABLE 0x0 +#define RGMII_MODE_ENABLE 0xA + +/* GPIO that controls power to DDR on EVM-SK */ +#define GPIO_DDR_VTT_EN 7 + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static struct am335x_baseboard_id __attribute__((section (".data"))) header; + +static inline int board_is_bone(void) +{ + return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); +} + +static inline int board_is_evm_sk(void) +{ + return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); +} + +/* + * Read header information from EEPROM into global structure. + */ +static int read_eeprom(void) +{ + /* Check if baseboard eeprom is available */ + if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + puts("Could not probe the EEPROM; something fundamentally " + "wrong on the I2C bus.\n"); + return -ENODEV; + } + + /* read the eeprom using i2c */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, + sizeof(header))) { + puts("Could not read the EEPROM; something fundamentally" + " wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + /* + * read the eeprom using i2c again, + * but use only a 1 byte address + */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, + (uchar *)&header, sizeof(header))) { + puts("Could not read the EEPROM; something " + "fundamentally wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + printf("Incorrect magic number (0x%x) in EEPROM\n", + header.magic); + return -EINVAL; + } + } + + return 0; +} + /* UART Defines */ #ifdef CONFIG_SPL_BUILD #define UART_RESET (0x1 << 1) @@ -57,6 +136,18 @@ static void init_timer(void) #endif /* + * Determine what type of DDR we have. + */ +static short inline board_memory_type(void) +{ + /* The following boards are known to use DDR3. */ + if (board_is_evm_sk()) + return EMIF_REG_SDRAM_TYPE_DDR3; + + return EMIF_REG_SDRAM_TYPE_DDR2; +} + +/* * early system init of muxing and clocks. */ void s_init(void) @@ -97,17 +188,36 @@ void s_init(void) preloader_console_init(); - config_ddr(); -#endif + /* Initalize the board header */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + enable_board_pin_mux(&header); + if (board_is_evm_sk()) { + /* + * EVM SK 1.2A and later use gpio0_7 to enable DDR3. + * This is safe enough to do on older revs. + */ + gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); + gpio_direction_output(GPIO_DDR_VTT_EN, 1); + } - /* Enable MMC0 */ - enable_mmc0_pin_mux(); + config_ddr(board_memory_type()); +#endif } #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + int ret; + + ret = omap_mmc_init(0, 0, 0); + if (ret) + return ret; + + return omap_mmc_init(1, 0, 0); } #endif @@ -116,3 +226,93 @@ void setup_clocks_for_console(void) /* Not yet implemented */ return; } + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_CPSW +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 1, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = AM335X_CPSW_MDIO_BASE, + .cpsw_base = AM335X_CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + debug("<ethaddr> not set. Reading from E-fuse\n"); + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + else + return -1; + } + + if (board_is_bone()) { + writel(MII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_MII; + } else { + writel(RGMII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_RGMII; + } + + return cpsw_register(&cpsw_data); +} +#endif diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index bbb9c1353f..2b19506a34 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -24,6 +24,7 @@ #define PRCM_MOD_EN 0x2 #define PRCM_FORCE_WAKEUP 0x2 +#define PRCM_FUNCTL 0x0 #define PRCM_EMIF_CLK_ACTIVITY BIT(2) #define PRCM_L3_GCLK_ACTIVITY BIT(4) @@ -38,7 +39,7 @@ #define CLK_MODE_SEL 0x7 #define CLK_MODE_MASK 0xfffffff8 #define CLK_DIV_SEL 0xFFFFFFE0 - +#define CPGMAC0_IDLE 0x30000 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; @@ -70,6 +71,10 @@ static void enable_interface_clocks(void) writel(PRCM_MOD_EN, &cmper->l4hsclkctrl); while (readl(&cmper->l4hsclkctrl) != PRCM_MOD_EN) ; + + writel(PRCM_MOD_EN, &cmwkup->wkgpio0clkctrl); + while (readl(&cmwkup->wkgpio0clkctrl) != PRCM_MOD_EN) + ; } /* @@ -118,6 +123,36 @@ static void enable_per_clocks(void) writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl); while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN) ; + + /* gpio1 module */ + writel(PRCM_MOD_EN, &cmper->gpio1clkctrl); + while (readl(&cmper->gpio1clkctrl) != PRCM_MOD_EN) + ; + + /* gpio2 module */ + writel(PRCM_MOD_EN, &cmper->gpio2clkctrl); + while (readl(&cmper->gpio2clkctrl) != PRCM_MOD_EN) + ; + + /* gpio3 module */ + writel(PRCM_MOD_EN, &cmper->gpio3clkctrl); + while (readl(&cmper->gpio3clkctrl) != PRCM_MOD_EN) + ; + + /* i2c1 */ + writel(PRCM_MOD_EN, &cmper->i2c1clkctrl); + while (readl(&cmper->i2c1clkctrl) != PRCM_MOD_EN) + ; + + /* Ethernet */ + writel(PRCM_MOD_EN, &cmper->cpgmac0clkctrl); + while ((readl(&cmper->cpgmac0clkctrl) & CPGMAC0_IDLE) != PRCM_FUNCTL) + ; + + /* spi0 */ + writel(PRCM_MOD_EN, &cmper->spi0clkctrl); + while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN) + ; } static void mpu_pll_config(void) @@ -216,7 +251,7 @@ static void per_pll_config(void) ; } -static void ddr_pll_config(void) +void ddr_pll_config(unsigned int ddrpll_m) { u32 clkmode, clksel, div_m2; @@ -234,7 +269,7 @@ static void ddr_pll_config(void) ; clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((DDRPLL_M << CLK_SEL_SHIFT) | DDRPLL_N); + clksel = clksel | ((ddrpll_m << CLK_SEL_SHIFT) | DDRPLL_N); writel(clksel, &cmwkup->clkseldpllddr); div_m2 = div_m2 & CLK_DIV_SEL; @@ -255,11 +290,6 @@ void enable_emif_clocks(void) writel(PRCM_MOD_EN, &cmper->emiffwclkctrl); /* Enable EMIF0 Clock */ writel(PRCM_MOD_EN, &cmper->emifclkctrl); - /* Poll for emif_gclk & L3_G clock are active */ - while ((readl(&cmper->l3clkstctrl) & (PRCM_EMIF_CLK_ACTIVITY | - PRCM_L3_GCLK_ACTIVITY)) != (PRCM_EMIF_CLK_ACTIVITY | - PRCM_L3_GCLK_ACTIVITY)) - ; /* Poll if module is functional */ while ((readl(&cmper->emifclkctrl)) != PRCM_MOD_EN) ; @@ -273,7 +303,6 @@ void pll_init() mpu_pll_config(); core_pll_config(); per_pll_config(); - ddr_pll_config(); /* Enable the required interconnect clocks */ enable_interface_clocks(); diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c index ed982c11e8..fd9fc4a720 100644 --- a/arch/arm/cpu/armv7/am33xx/ddr.c +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -17,13 +17,15 @@ http://www.ti.com/ #include <asm/arch/cpu.h> #include <asm/arch/ddr_defs.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> +#include <asm/emif.h> /** * Base address for EMIF instances */ -static struct emif_regs *emif_reg = { - (struct emif_regs *)EMIF4_0_CFG_BASE}; +static struct emif_reg_struct *emif_reg = { + (struct emif_reg_struct *)EMIF4_0_CFG_BASE}; /** * Base address for DDR instance @@ -39,109 +41,79 @@ static struct ddr_cmdtctrl *ioctrl_reg = { (struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR}; /** - * As a convention, all functions here return 0 on success - * -1 on failure. - */ - -/** * Configure SDRAM */ -int config_sdram(struct sdram_config *cfg) +void config_sdram(const struct emif_regs *regs) { - writel(cfg->sdrcr, &emif_reg->sdrcr); - writel(cfg->sdrcr2, &emif_reg->sdrcr2); - writel(cfg->refresh, &emif_reg->sdrrcr); - writel(cfg->refresh_sh, &emif_reg->sdrrcsr); - - return 0; + writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl); + writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw); + if (regs->zq_config){ + writel(regs->zq_config, &emif_reg->emif_zq_config); + writel(regs->sdram_config, &cstat->secure_emif_sdram_config); + } + writel(regs->sdram_config, &emif_reg->emif_sdram_config); } /** * Set SDRAM timings */ -int set_sdram_timings(struct sdram_timing *t) +void set_sdram_timings(const struct emif_regs *regs) { - writel(t->time1, &emif_reg->sdrtim1); - writel(t->time1_sh, &emif_reg->sdrtim1sr); - writel(t->time2, &emif_reg->sdrtim2); - writel(t->time2_sh, &emif_reg->sdrtim2sr); - writel(t->time3, &emif_reg->sdrtim3); - writel(t->time3_sh, &emif_reg->sdrtim3sr); - - return 0; + writel(regs->sdram_tim1, &emif_reg->emif_sdram_tim_1); + writel(regs->sdram_tim1, &emif_reg->emif_sdram_tim_1_shdw); + writel(regs->sdram_tim2, &emif_reg->emif_sdram_tim_2); + writel(regs->sdram_tim2, &emif_reg->emif_sdram_tim_2_shdw); + writel(regs->sdram_tim3, &emif_reg->emif_sdram_tim_3); + writel(regs->sdram_tim3, &emif_reg->emif_sdram_tim_3_shdw); } /** * Configure DDR PHY */ -int config_ddr_phy(struct ddr_phy_control *p) +void config_ddr_phy(const struct emif_regs *regs) { - writel(p->reg, &emif_reg->ddrphycr); - writel(p->reg_sh, &emif_reg->ddrphycsr); - - return 0; + writel(regs->emif_ddr_phy_ctlr_1, &emif_reg->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif_reg->emif_ddr_phy_ctrl_1_shdw); } /** * Configure DDR CMD control registers */ -int config_cmd_ctrl(struct cmd_control *cmd) +void config_cmd_ctrl(const struct cmd_control *cmd) { writel(cmd->cmd0csratio, &ddr_reg[0]->cm0csratio); - writel(cmd->cmd0csforce, &ddr_reg[0]->cm0csforce); - writel(cmd->cmd0csdelay, &ddr_reg[0]->cm0csdelay); writel(cmd->cmd0dldiff, &ddr_reg[0]->cm0dldiff); writel(cmd->cmd0iclkout, &ddr_reg[0]->cm0iclkout); writel(cmd->cmd1csratio, &ddr_reg[0]->cm1csratio); - writel(cmd->cmd1csforce, &ddr_reg[0]->cm1csforce); - writel(cmd->cmd1csdelay, &ddr_reg[0]->cm1csdelay); writel(cmd->cmd1dldiff, &ddr_reg[0]->cm1dldiff); writel(cmd->cmd1iclkout, &ddr_reg[0]->cm1iclkout); writel(cmd->cmd2csratio, &ddr_reg[0]->cm2csratio); - writel(cmd->cmd2csforce, &ddr_reg[0]->cm2csforce); - writel(cmd->cmd2csdelay, &ddr_reg[0]->cm2csdelay); writel(cmd->cmd2dldiff, &ddr_reg[0]->cm2dldiff); writel(cmd->cmd2iclkout, &ddr_reg[0]->cm2iclkout); - - return 0; } /** * Configure DDR DATA registers */ -int config_ddr_data(int macrono, struct ddr_data *data) +void config_ddr_data(int macrono, const struct ddr_data *data) { writel(data->datardsratio0, &ddr_reg[macrono]->dt0rdsratio0); - writel(data->datardsratio1, &ddr_reg[macrono]->dt0rdsratio1); - writel(data->datawdsratio0, &ddr_reg[macrono]->dt0wdsratio0); - writel(data->datawdsratio1, &ddr_reg[macrono]->dt0wdsratio1); - writel(data->datawiratio0, &ddr_reg[macrono]->dt0wiratio0); - writel(data->datawiratio1, &ddr_reg[macrono]->dt0wiratio1); writel(data->datagiratio0, &ddr_reg[macrono]->dt0giratio0); - writel(data->datagiratio1, &ddr_reg[macrono]->dt0giratio1); - writel(data->datafwsratio0, &ddr_reg[macrono]->dt0fwsratio0); - writel(data->datafwsratio1, &ddr_reg[macrono]->dt0fwsratio1); - writel(data->datawrsratio0, &ddr_reg[macrono]->dt0wrsratio0); - writel(data->datawrsratio1, &ddr_reg[macrono]->dt0wrsratio1); - + writel(data->datauserank0delay, &ddr_reg[macrono]->dt0rdelays0); writel(data->datadldiff0, &ddr_reg[macrono]->dt0dldiff0); - - return 0; } -int config_io_ctrl(struct ddr_ioctrl *ioctrl) +void config_io_ctrl(unsigned long val) { - writel(ioctrl->cmd1ctl, &ioctrl_reg->cm0ioctl); - writel(ioctrl->cmd2ctl, &ioctrl_reg->cm1ioctl); - writel(ioctrl->cmd3ctl, &ioctrl_reg->cm2ioctl); - writel(ioctrl->data1ctl, &ioctrl_reg->dt0ioctl); - writel(ioctrl->data2ctl, &ioctrl_reg->dt1ioctl); - - return 0; + writel(val, &ioctrl_reg->cm0ioctl); + writel(val, &ioctrl_reg->cm1ioctl); + writel(val, &ioctrl_reg->cm2ioctl); + writel(val, &ioctrl_reg->dt0ioctl); + writel(val, &ioctrl_reg->dt1ioctl); } diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 2f4164df82..b2d7c0d956 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -21,15 +21,12 @@ #include <asm/arch/ddr_defs.h> #include <asm/arch/hardware.h> #include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> #include <asm/io.h> +#include <asm/emif.h> DECLARE_GLOBAL_DATA_PTR; -struct ddr_regs *ddrregs = (struct ddr_regs *)DDR_PHY_BASE_ADDR; -struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR; -struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; - - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -47,58 +44,80 @@ void dram_init_banksize(void) #ifdef CONFIG_SPL_BUILD -static void data_macro_config(int dataMacroNum) -{ - struct ddr_data data; - - data.datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20) - |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)); - data.datardsratio1 = DDR2_RD_DQS>>2; - data.datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20) - |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)); - data.datawdsratio1 = DDR2_WR_DQS>>2; - data.datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20) - |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)); - data.datawiratio1 = DDR2_PHY_WRLVL>>2; - data.datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20) - |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)); - data.datagiratio1 = DDR2_PHY_GATELVL>>2; - data.datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20) - |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)); - data.datafwsratio1 = DDR2_PHY_FIFO_WE>>2; - data.datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) - |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)); - data.datawrsratio1 = DDR2_PHY_WR_DATA>>2; - data.datadldiff0 = PHY_DLL_LOCK_DIFF; - - config_ddr_data(dataMacroNum, &data); -} - -static void cmd_macro_config(void) -{ - struct cmd_control cmd; - - cmd.cmd0csratio = DDR2_RATIO; - cmd.cmd0csforce = CMD_FORCE; - cmd.cmd0csdelay = CMD_DELAY; - cmd.cmd0dldiff = DDR2_DLL_LOCK_DIFF; - cmd.cmd0iclkout = DDR2_INVERT_CLKOUT; - - cmd.cmd1csratio = DDR2_RATIO; - cmd.cmd1csforce = CMD_FORCE; - cmd.cmd1csdelay = CMD_DELAY; - cmd.cmd1dldiff = DDR2_DLL_LOCK_DIFF; - cmd.cmd1iclkout = DDR2_INVERT_CLKOUT; - - cmd.cmd2csratio = DDR2_RATIO; - cmd.cmd2csforce = CMD_FORCE; - cmd.cmd2csdelay = CMD_DELAY; - cmd.cmd2dldiff = DDR2_DLL_LOCK_DIFF; - cmd.cmd2iclkout = DDR2_INVERT_CLKOUT; - - config_cmd_ctrl(&cmd); - -} +static struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR; +static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; + +static const struct ddr_data ddr2_data = { + .datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20) + |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)), + .datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20) + |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)), + .datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20) + |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)), + .datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20) + |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)), + .datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20) + |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)), + .datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) + |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)), + .datauserank0delay = DDR2_PHY_RANK0_DELAY, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr2_cmd_ctrl_data = { + .cmd0csratio = DDR2_RATIO, + .cmd0dldiff = DDR2_DLL_LOCK_DIFF, + .cmd0iclkout = DDR2_INVERT_CLKOUT, + + .cmd1csratio = DDR2_RATIO, + .cmd1dldiff = DDR2_DLL_LOCK_DIFF, + .cmd1iclkout = DDR2_INVERT_CLKOUT, + + .cmd2csratio = DDR2_RATIO, + .cmd2dldiff = DDR2_DLL_LOCK_DIFF, + .cmd2iclkout = DDR2_INVERT_CLKOUT, +}; + +static const struct emif_regs ddr2_emif_reg_data = { + .sdram_config = DDR2_EMIF_SDCFG, + .ref_ctrl = DDR2_EMIF_SDREF, + .sdram_tim1 = DDR2_EMIF_TIM1, + .sdram_tim2 = DDR2_EMIF_TIM2, + .sdram_tim3 = DDR2_EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = DDR2_EMIF_READ_LATENCY, +}; + +static const struct ddr_data ddr3_data = { + .datardsratio0 = DDR3_RD_DQS, + .datawdsratio0 = DDR3_WR_DQS, + .datafwsratio0 = DDR3_PHY_FIFO_WE, + .datawrsratio0 = DDR3_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = DDR3_RATIO, + .cmd0dldiff = DDR3_DLL_LOCK_DIFF, + .cmd0iclkout = DDR3_INVERT_CLKOUT, + + .cmd1csratio = DDR3_RATIO, + .cmd1dldiff = DDR3_DLL_LOCK_DIFF, + .cmd1iclkout = DDR3_INVERT_CLKOUT, + + .cmd2csratio = DDR3_RATIO, + .cmd2dldiff = DDR3_DLL_LOCK_DIFF, + .cmd2iclkout = DDR3_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = DDR3_EMIF_SDCFG, + .ref_ctrl = DDR3_EMIF_SDREF, + .sdram_tim1 = DDR3_EMIF_TIM1, + .sdram_tim2 = DDR3_EMIF_TIM2, + .sdram_tim3 = DDR3_EMIF_TIM3, + .zq_config = DDR3_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = DDR3_EMIF_READ_LATENCY, +}; static void config_vtp(void) { @@ -115,87 +134,46 @@ static void config_vtp(void) ; } -static void config_emif_ddr2(void) -{ - int i; - int ret; - struct sdram_config cfg; - struct sdram_timing tmg; - struct ddr_phy_control phyc; - - /*Program EMIF0 CFG Registers*/ - phyc.reg = EMIF_READ_LATENCY; - phyc.reg_sh = EMIF_READ_LATENCY; - phyc.reg2 = EMIF_READ_LATENCY; - - tmg.time1 = EMIF_TIM1; - tmg.time1_sh = EMIF_TIM1; - tmg.time2 = EMIF_TIM2; - tmg.time2_sh = EMIF_TIM2; - tmg.time3 = EMIF_TIM3; - tmg.time3_sh = EMIF_TIM3; - - cfg.sdrcr = EMIF_SDCFG; - cfg.sdrcr2 = EMIF_SDCFG; - cfg.refresh = 0x00004650; - cfg.refresh_sh = 0x00004650; - - /* Program EMIF instance */ - ret = config_ddr_phy(&phyc); - if (ret < 0) - printf("Couldn't configure phyc\n"); - - ret = config_sdram(&cfg); - if (ret < 0) - printf("Couldn't configure SDRAM\n"); - - ret = set_sdram_timings(&tmg); - if (ret < 0) - printf("Couldn't configure timings\n"); - - /* Delay */ - for (i = 0; i < 5000; i++) - ; - - cfg.refresh = EMIF_SDREF; - cfg.refresh_sh = EMIF_SDREF; - cfg.sdrcr = EMIF_SDCFG; - cfg.sdrcr2 = EMIF_SDCFG; - - ret = config_sdram(&cfg); - if (ret < 0) - printf("Couldn't configure SDRAM\n"); -} - -void config_ddr(void) +void config_ddr(short ddr_type) { - int data_macro_0 = 0; - int data_macro_1 = 1; - struct ddr_ioctrl ioctrl; + int ddr_pll, ioctrl_val; + const struct emif_regs *emif_regs; + const struct ddr_data *ddr_data; + const struct cmd_control *cmd_ctrl_data; + + if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) { + ddr_pll = 266; + cmd_ctrl_data = &ddr2_cmd_ctrl_data; + ddr_data = &ddr2_data; + ioctrl_val = DDR2_IOCTRL_VALUE; + emif_regs = &ddr2_emif_reg_data; + } else if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR3) { + ddr_pll = 303; + cmd_ctrl_data = &ddr3_cmd_ctrl_data; + ddr_data = &ddr3_data; + ioctrl_val = DDR3_IOCTRL_VALUE; + emif_regs = &ddr3_emif_reg_data; + } else { + puts("Unknown memory type"); + hang(); + } enable_emif_clocks(); - + ddr_pll_config(ddr_pll); config_vtp(); + config_cmd_ctrl(cmd_ctrl_data); - cmd_macro_config(); - - data_macro_config(data_macro_0); - data_macro_config(data_macro_1); + config_ddr_data(0, ddr_data); + config_ddr_data(1, ddr_data); - writel(PHY_RANK0_DELAY, &ddrregs->dt0rdelays0); - writel(PHY_RANK0_DELAY, &ddrregs->dt1rdelays0); + config_io_ctrl(ioctrl_val); - ioctrl.cmd1ctl = DDR_IOCTRL_VALUE; - ioctrl.cmd2ctl = DDR_IOCTRL_VALUE; - ioctrl.cmd3ctl = DDR_IOCTRL_VALUE; - ioctrl.data1ctl = DDR_IOCTRL_VALUE; - ioctrl.data2ctl = DDR_IOCTRL_VALUE; + /* Set CKE to be controlled by EMIF/DDR PHY */ + writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl); - config_io_ctrl(&ioctrl); - - writel(readl(&ddrctrl->ddrioctrl) & 0xefffffff, &ddrctrl->ddrioctrl); - writel(readl(&ddrctrl->ddrckectrl) | 0x00000001, &ddrctrl->ddrckectrl); - - config_emif_ddr2(); + /* Program EMIF instance */ + config_ddr_phy(emif_regs); + set_sdram_timings(emif_regs); + config_sdram(emif_regs); } #endif diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index 560c084dc9..5407cb68a8 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -26,8 +26,6 @@ PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float # supported by more tool-chains PF_CPPFLAGS_ARMV7 := $(call cc-option, -march=armv7-a, -march=armv5) PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV7) -PF_CPPFLAGS_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) -PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_NO_UNALIGNED) # ========================================================================= # diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c index c6fa8ef136..39a80237cd 100644 --- a/arch/arm/cpu/armv7/cpu.c +++ b/arch/arm/cpu/armv7/cpu.c @@ -36,13 +36,9 @@ #include <asm/system.h> #include <asm/cache.h> #include <asm/armv7.h> +#include <linux/compiler.h> -void save_boot_params_default(u32 r0, u32 r1, u32 r2, u32 r3) -{ -} - -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) - __attribute__((weak, alias("save_boot_params_default"))); +void __weak cpu_cache_initialization(void){} int cleanup_before_linux(void) { @@ -81,5 +77,10 @@ int cleanup_before_linux(void) */ invalidate_dcache_all(); + /* + * Some CPU need more cache attention before starting the kernel. + */ + cpu_cache_initialization(); + return 0; } diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index f7829b2cc7..4f3b451be9 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -98,7 +98,7 @@ static unsigned long exynos5_get_pll_clk(int pllreg) struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); unsigned long r, m, p, s, k = 0, mask, fout; - unsigned int freq; + unsigned int freq, pll_div2_sel, fout_sel; switch (pllreg) { case APLL: @@ -115,6 +115,9 @@ static unsigned long exynos5_get_pll_clk(int pllreg) r = readl(&clk->vpll_con0); k = readl(&clk->vpll_con1); break; + case BPLL: + r = readl(&clk->bpll_con0); + break; default: printf("Unsupported PLL (%d)\n", pllreg); return 0; @@ -125,8 +128,9 @@ static unsigned long exynos5_get_pll_clk(int pllreg) * MPLL_CON: MIDV [25:16] * EPLL_CON: MIDV [24:16] * VPLL_CON: MIDV [24:16] + * BPLL_CON: MIDV [25:16] */ - if (pllreg == APLL || pllreg == MPLL) + if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) mask = 0x3ff; else mask = 0x1ff; @@ -155,6 +159,29 @@ static unsigned long exynos5_get_pll_clk(int pllreg) fout = m * (freq / (p * (1 << (s - 1)))); } + /* According to the user manual, in EVT1 MPLL and BPLL always gives + * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/ + if (pllreg == MPLL || pllreg == BPLL) { + pll_div2_sel = readl(&clk->pll_div2_sel); + + switch (pllreg) { + case MPLL: + fout_sel = (pll_div2_sel >> MPLL_FOUT_SEL_SHIFT) + & MPLL_FOUT_SEL_MASK; + break; + case BPLL: + fout_sel = (pll_div2_sel >> BPLL_FOUT_SEL_SHIFT) + & BPLL_FOUT_SEL_MASK; + break; + default: + fout_sel = -1; + break; + } + + if (fout_sel == 0) + fout /= 2; + } + return fout; } @@ -456,6 +483,48 @@ static unsigned long exynos4_get_lcd_clk(void) return pclk; } +/* get_lcd_clk: return lcd clock frequency */ +static unsigned long exynos5_get_lcd_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long pclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + */ + sel = readl(&clk->src_disp1_0); + sel = sel & 0xf; + + /* + * 0x6: SCLK_MPLL + * 0x7: SCLK_EPLL + * 0x8: SCLK_VPLL + */ + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + */ + ratio = readl(&clk->div_disp1_0); + ratio = ratio & 0xf; + + pclk = sclk / (ratio + 1); + + return pclk; +} + void exynos4_set_lcd_clk(void) { struct exynos4_clock *clk = @@ -518,6 +587,68 @@ void exynos4_set_lcd_clk(void) writel(cfg, &clk->div_lcd0); } +void exynos5_set_lcd_clk(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int cfg = 0; + + /* + * CLK_GATE_BLOCK + * CLK_CAM [0] + * CLK_TV [1] + * CLK_MFC [2] + * CLK_G3D [3] + * CLK_LCD0 [4] + * CLK_LCD1 [5] + * CLK_GPS [7] + */ + cfg = readl(&clk->gate_block); + cfg |= 1 << 4; + writel(cfg, &clk->gate_block); + + /* + * CLK_SRC_LCD0 + * FIMD0_SEL [3:0] + * MDNIE0_SEL [7:4] + * MDNIE_PWM0_SEL [8:11] + * MIPI0_SEL [12:15] + * set lcd0 src clock 0x6: SCLK_MPLL + */ + cfg = readl(&clk->src_disp1_0); + cfg &= ~(0xf); + cfg |= 0x8; + writel(cfg, &clk->src_disp1_0); + + /* + * CLK_GATE_IP_LCD0 + * CLK_FIMD0 [0] + * CLK_MIE0 [1] + * CLK_MDNIE0 [2] + * CLK_DSIM0 [3] + * CLK_SMMUFIMD0 [4] + * CLK_PPMULCD0 [5] + * Gating all clocks for FIMD0 + */ + cfg = readl(&clk->gate_ip_disp1); + cfg |= 1 << 0; + writel(cfg, &clk->gate_ip_disp1); + + /* + * CLK_DIV_LCD0 + * FIMD0_RATIO [3:0] + * MDNIE0_RATIO [7:4] + * MDNIE_PWM0_RATIO [11:8] + * MDNIE_PWM_PRE_RATIO [15:12] + * MIPI0_RATIO [19:16] + * MIPI0_PRE_RATIO [23:20] + * set fimd ratio + */ + cfg &= ~(0xf); + cfg |= 0x0; + writel(cfg, &clk->div_disp1_0); +} + void exynos4_set_mipi_clk(void) { struct exynos4_clock *clk = @@ -656,13 +787,15 @@ unsigned long get_lcd_clk(void) if (cpu_is_exynos4()) return exynos4_get_lcd_clk(); else - return 0; + return exynos5_get_lcd_clk(); } void set_lcd_clk(void) { if (cpu_is_exynos4()) exynos4_set_lcd_clk(); + else + exynos5_set_lcd_clk(); } void set_mipi_clk(void) diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index d28f05557f..7776add9db 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -40,8 +40,8 @@ static void exynos5_uart_config(int peripheral) count = 4; break; case PERIPH_ID_UART1: - bank = &gpio1->a0; - start = 4; + bank = &gpio1->d0; + start = 0; count = 4; break; case PERIPH_ID_UART2: @@ -66,23 +66,27 @@ static int exynos5_mmc_config(int peripheral, int flags) struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); struct s5p_gpio_bank *bank, *bank_ext; - int i; + int i, start = 0, gpio_func = 0; switch (peripheral) { case PERIPH_ID_SDMMC0: bank = &gpio1->c0; bank_ext = &gpio1->c1; + start = 0; + gpio_func = GPIO_FUNC(0x2); break; case PERIPH_ID_SDMMC1: - bank = &gpio1->c1; + bank = &gpio1->c2; bank_ext = NULL; break; case PERIPH_ID_SDMMC2: - bank = &gpio1->c2; - bank_ext = &gpio1->c3; + bank = &gpio1->c3; + bank_ext = &gpio1->c4; + start = 3; + gpio_func = GPIO_FUNC(0x3); break; case PERIPH_ID_SDMMC3: - bank = &gpio1->c3; + bank = &gpio1->c4; bank_ext = NULL; break; } @@ -92,8 +96,8 @@ static int exynos5_mmc_config(int peripheral, int flags) return -1; } if (flags & PINMUX_FLAG_8BIT_MODE) { - for (i = 3; i <= 6; i++) { - s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); + for (i = start; i <= (start + 3); i++) { + s5p_gpio_cfg_pin(bank_ext, i, gpio_func); s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP); s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); } diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c index 4116781a36..d4bce6d4dd 100644 --- a/arch/arm/cpu/armv7/exynos/power.c +++ b/arch/arm/cpu/armv7/exynos/power.c @@ -74,3 +74,24 @@ void set_usbhost_phy_ctrl(unsigned int enable) if (cpu_is_exynos5()) exynos5_set_usbhost_phy_ctrl(enable); } + +static void exynos5_dp_phy_control(unsigned int enable) +{ + unsigned int cfg; + struct exynos5_power *power = + (struct exynos5_power *)samsung_get_base_power(); + + cfg = readl(&power->dptx_phy_control); + if (enable) + cfg |= EXYNOS_DP_PHY_ENABLE; + else + cfg &= ~EXYNOS_DP_PHY_ENABLE; + + writel(cfg, &power->dptx_phy_control); +} + +void set_dp_phy_ctrl(unsigned int enable) +{ + if (cpu_is_exynos5()) + exynos5_dp_phy_control(enable); +} diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c index dcfcec22dc..ab65b8d3a8 100644 --- a/arch/arm/cpu/armv7/exynos/soc.c +++ b/arch/arm/cpu/armv7/exynos/soc.c @@ -28,3 +28,11 @@ void reset_cpu(ulong addr) { writel(0x1, samsung_get_base_swreset()); } + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/system.c b/arch/arm/cpu/armv7/exynos/system.c index 4426611d1b..8424c57e95 100644 --- a/arch/arm/cpu/armv7/exynos/system.c +++ b/arch/arm/cpu/armv7/exynos/system.c @@ -62,8 +62,26 @@ static void exynos4_set_system_display(void) writel(cfg, &sysreg->display_ctrl); } +static void exynos5_set_system_display(void) +{ + struct exynos5_sysreg *sysreg = + (struct exynos5_sysreg *)samsung_get_base_sysreg(); + unsigned int cfg = 0; + + /* + * system register path set + * 0: MIE/MDNIE + * 1: FIMD Bypass + */ + cfg = readl(&sysreg->disp1blk_cfg); + cfg |= (1 << 15); + writel(cfg, &sysreg->disp1blk_cfg); +} + void set_system_display_ctrl(void) { if (cpu_is_exynos4()) exynos4_set_system_display(); + else + exynos5_set_system_display(); } diff --git a/arch/arm/cpu/armv7/imx-common/Makefile b/arch/arm/cpu/armv7/imx-common/Makefile index bf36be5767..16fba8da93 100644 --- a/arch/arm/cpu/armv7/imx-common/Makefile +++ b/arch/arm/cpu/armv7/imx-common/Makefile @@ -29,6 +29,7 @@ LIB = $(obj)libimx-common.o COBJS-y = iomux-v3.o timer.o cpu.o speed.o COBJS-$(CONFIG_I2C_MXC) += i2c.o +COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o COBJS := $(sort $(COBJS-y)) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/imx-common/cmd_bmode.c b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c new file mode 100644 index 0000000000..02fe72ed7f --- /dev/null +++ b/arch/arm/cpu/armv7/imx-common/cmd_bmode.c @@ -0,0 +1,119 @@ +/* + * Copyright (C) 2012 Boundary Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/imx-common/boot_mode.h> +#include <malloc.h> + +static const struct boot_mode *modes[2]; + +static const struct boot_mode *search_modes(char *arg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(modes); i++) { + const struct boot_mode *p = modes[i]; + if (p) { + while (p->name) { + if (!strcmp(p->name, arg)) + return p; + p++; + } + } + } + return NULL; +} + +static int create_usage(char *dest) +{ + int i; + int size = 0; + + for (i = 0; i < ARRAY_SIZE(modes); i++) { + const struct boot_mode *p = modes[i]; + if (p) { + while (p->name) { + int len = strlen(p->name); + if (dest) { + memcpy(dest, p->name, len); + dest += len; + *dest++ = '|'; + } + size += len + 1; + p++; + } + } + } + if (dest) + memcpy(dest - 1, " [noreset]", 11); /* include trailing 0 */ + size += 10; + return size; +} + +static int do_boot_mode(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + const struct boot_mode *p; + int reset_requested = 1; + + if (argc < 2) + return CMD_RET_USAGE; + p = search_modes(argv[1]); + if (!p) + return CMD_RET_USAGE; + if (argc == 3) { + if (strcmp(argv[2], "noreset")) + return CMD_RET_USAGE; + reset_requested = 0; + } + + boot_mode_apply(p->cfg_val); + if (reset_requested && p->cfg_val) + do_reset(NULL, 0, 0, NULL); + return 0; +} + +U_BOOT_CMD( + bmode, 3, 0, do_boot_mode, + NULL, + ""); + +void add_board_boot_modes(const struct boot_mode *p) +{ + int size; + char *dest; + + if (__u_boot_cmd_bmode.usage) { + free(__u_boot_cmd_bmode.usage); + __u_boot_cmd_bmode.usage = NULL; + } + + modes[0] = p; + modes[1] = soc_boot_modes; + size = create_usage(NULL); + dest = malloc(size); + if (dest) { + create_usage(dest); + __u_boot_cmd_bmode.usage = dest; + } +} diff --git a/arch/arm/cpu/armv7/imx-common/cpu.c b/arch/arm/cpu/armv7/imx-common/cpu.c index b3195dd6fb..fa1d468041 100644 --- a/arch/arm/cpu/armv7/imx-common/cpu.c +++ b/arch/arm/cpu/armv7/imx-common/cpu.c @@ -66,7 +66,7 @@ char *get_reset_cause(void) #if defined(CONFIG_DISPLAY_CPUINFO) -static char *get_imx_type(u32 imxtype) +static const char *get_imx_type(u32 imxtype) { switch (imxtype) { case 0x63: @@ -80,7 +80,7 @@ static char *get_imx_type(u32 imxtype) case 0x53: return "53"; default: - return "unknown"; + return "??"; } } @@ -111,18 +111,16 @@ int cpu_eth_init(bd_t *bis) return rc; } +#ifdef CONFIG_FSL_ESDHC /* * Initializes on-chip MMC controllers. * to override, implement board_mmc_init() */ int cpu_mmc_init(bd_t *bis) { -#ifdef CONFIG_FSL_ESDHC return fsl_esdhc_mmc_init(bis); -#else - return 0; -#endif } +#endif void reset_cpu(ulong addr) { diff --git a/arch/arm/cpu/armv7/imx-common/timer.c b/arch/arm/cpu/armv7/imx-common/timer.c index 1645ff83f4..e2725e1a64 100644 --- a/arch/arm/cpu/armv7/imx-common/timer.c +++ b/arch/arm/cpu/armv7/imx-common/timer.c @@ -61,7 +61,7 @@ static inline unsigned long long tick_to_time(unsigned long long tick) static inline unsigned long long us_to_tick(unsigned long long usec) { - usec *= CLK_32KHZ; + usec = usec * CLK_32KHZ + 999999; do_div(usec, 1000000); return usec; diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S new file mode 100644 index 0000000000..0d45528e99 --- /dev/null +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -0,0 +1,51 @@ +/* + * A lowlevel_init function that sets up the stack to call a C function to + * perform further init. + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm-offsets.h> +#include <config.h> +#include <linux/linkage.h> + +ENTRY(lowlevel_init) + /* + * Setup a temporary stack + */ + ldr sp, =CONFIG_SYS_INIT_SP_ADDR + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + + /* + * Save the old lr(passed in ip) and the current lr to stack + */ + push {ip, lr} + + /* + * go setup pll, mux, memory + */ + bl s_init + pop {ip, pc} +ENDPROC(lowlevel_init) diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 683a7b53af..a40b84feeb 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -36,9 +36,9 @@ /* reconfigure L2 cache aux control reg */ mov r0, #0xC0 /* tag RAM */ add r0, r0, #0x4 /* data RAM */ - orr r0, r0, #(1 << 24) /* disable write allocate delay */ - orr r0, r0, #(1 << 23) /* disable write allocate combine */ - orr r0, r0, #(1 << 22) /* disable write allocate */ + orr r0, r0, #1 << 24 /* disable write allocate delay */ + orr r0, r0, #1 << 23 /* disable write allocate combine */ + orr r0, r0, #1 << 22 /* disable write allocate */ #if defined(CONFIG_MX51) ldr r1, =0x0 @@ -46,7 +46,7 @@ cmp r3, #0x10 /* disable write combine for TO 2 and lower revs */ - orrls r0, r0, #(1 << 25) + orrls r0, r0, #1 << 25 #endif mcr 15, 1, r0, c9, c0, 2 @@ -247,9 +247,9 @@ movhi r1, #0 #else mov r1, #0 - #endif str r1, [r0, #CLKCTL_CACRR] + /* Switch ARM back to PLL 1 */ mov r1, #0 str r1, [r0, #CLKCTL_CCSR] @@ -288,9 +288,9 @@ /* Switch peripheral to PLL2 */ ldr r0, =CCM_BASE_ADDR ldr r1, =0x00808145 - orr r1, r1, #(2 << 10) - orr r1, r1, #(0 << 16) - orr r1, r1, #(1 << 19) + orr r1, r1, #2 << 10 + orr r1, r1, #0 << 16 + orr r1, r1, #1 << 19 str r1, [r0, #CLKCTL_CBCDR] ldr r1, =0x00016154 @@ -331,10 +331,10 @@ ENTRY(lowlevel_init) #if defined(CONFIG_MX51) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] - orr r1, r1, #(1 << 23) + orr r1, r1, #1 << 23 str r1, [r0, #0x0] ldr r1, [r0, #0x4] - orr r1, r1, #(1 << 23) + orr r1, r1, #1 << 23 str r1, [r0, #0x4] #endif @@ -351,16 +351,16 @@ ENTRY(lowlevel_init) ENDPROC(lowlevel_init) /* Board level setting value */ -W_DP_OP_864: .word DP_OP_864 -W_DP_MFD_864: .word DP_MFD_864 -W_DP_MFN_864: .word DP_MFN_864 -W_DP_MFN_800_DIT: .word DP_MFN_800_DIT -W_DP_OP_800: .word DP_OP_800 -W_DP_MFD_800: .word DP_MFD_800 -W_DP_MFN_800: .word DP_MFN_800 -W_DP_OP_665: .word DP_OP_665 -W_DP_MFD_665: .word DP_MFD_665 -W_DP_MFN_665: .word DP_MFN_665 -W_DP_OP_216: .word DP_OP_216 -W_DP_MFD_216: .word DP_MFD_216 -W_DP_MFN_216: .word DP_MFN_216 +W_DP_OP_864: .word DP_OP_864 +W_DP_MFD_864: .word DP_MFD_864 +W_DP_MFN_864: .word DP_MFN_864 +W_DP_MFN_800_DIT: .word DP_MFN_800_DIT +W_DP_OP_800: .word DP_OP_800 +W_DP_MFD_800: .word DP_MFD_800 +W_DP_MFN_800: .word DP_MFN_800 +W_DP_OP_665: .word DP_OP_665 +W_DP_MFD_665: .word DP_MFD_665 +W_DP_MFN_665: .word DP_MFN_665 +W_DP_OP_216: .word DP_OP_216 +W_DP_MFD_216: .word DP_MFD_216 +W_DP_MFN_216: .word DP_MFN_216 diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index 3f5a4f726c..263658aa4b 100644 --- a/arch/arm/cpu/armv7/mx5/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -30,6 +30,7 @@ #include <asm/errno.h> #include <asm/io.h> +#include <asm/imx-common/boot_mode.h> #if !(defined(CONFIG_MX51) || defined(CONFIG_MX53)) #error "CPU_TYPE not defined" @@ -71,6 +72,14 @@ u32 get_cpu_rev(void) return system_rev; } +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif + #if defined(CONFIG_FEC_MXC) void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { @@ -115,3 +124,33 @@ void set_chipselect_size(int const cs_size) writel(reg, &iomuxc_regs->gpr1); } + +#ifdef CONFIG_MX53 +void boot_mode_apply(unsigned cfg_val) +{ + writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr); +} +/* + * cfg_val will be used for + * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * + * If bit 28 of LPGR is set upon watchdog reset, + * bits[25:0] of LPGR will move to SBMR. + */ +const struct boot_mode soc_boot_modes[] = { + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, + /* usb or serial download */ + {"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)}, + {"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)}, + {"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)}, + {"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)}, + {"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)}, + {"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)}, + /* 4 bit bus width */ + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)}, + {"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)}, + {"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)}, + {"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)}, + {NULL, 0}, +}; +#endif diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 84b458c7eb..7380ffe46c 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -29,6 +29,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> u32 get_cpu_rev(void) { @@ -141,3 +142,38 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) } #endif + +void boot_mode_apply(unsigned cfg_val) +{ + unsigned reg; + struct src_regs *psrc = (struct src_regs *)SRC_BASE_ADDR; + writel(cfg_val, &psrc->gpr9); + reg = readl(&psrc->gpr10); + if (cfg_val) + reg |= 1 << 28; + else + reg &= ~(1 << 28); + writel(reg, &psrc->gpr10); +} +/* + * cfg_val will be used for + * Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0] + * After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0] + * to SBMR1, which will determine the boot device. + */ +const struct boot_mode soc_boot_modes[] = { + {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, + /* reserved value should start rom usb */ + {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)}, + {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, + {"escpi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)}, + {"escpi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)}, + {"escpi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)}, + {"escpi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)}, + /* 4 bit bus width */ + {"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, + {"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, + {"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {NULL, 0}, +}; diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 2a6625f1c4..d37b22d98a 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -29,9 +29,6 @@ SOBJS := reset.o COBJS := timer.o COBJS += utils.o -ifdef CONFIG_OMAP -COBJS += gpio.o -endif ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) COBJS += hwinit-common.o diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index ccc6bb6b85..1ece073630 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -78,24 +78,6 @@ ENTRY(save_boot_params) bx lr ENDPROC(save_boot_params) -ENTRY(lowlevel_init) - /* - * Setup a temporary stack - */ - ldr sp, =LOW_LEVEL_SRAM_STACK - - /* - * Save the old lr(passed in ip) and the current lr to stack - */ - push {ip, lr} - - /* - * go setup pll, mux, memory - */ - bl s_init - pop {ip, pc} -ENDPROC(lowlevel_init) - ENTRY(set_pl310_ctrl_reg) PUSH {r4-r11, lr} @ save registers - ROM code may pollute @ our registers diff --git a/arch/arm/cpu/armv7/s5p-common/pwm.c b/arch/arm/cpu/armv7/s5p-common/pwm.c index 58d279e003..44d7bc360e 100644 --- a/arch/arm/cpu/armv7/s5p-common/pwm.c +++ b/arch/arm/cpu/armv7/s5p-common/pwm.c @@ -170,7 +170,7 @@ int pwm_init(int pwm_id, int div, int invert) timer_rate_hz = get_pwm_clk() / ((prescaler + 1) * (div + 1)); - timer_rate_hz = timer_rate_hz / 100; + timer_rate_hz = timer_rate_hz / CONFIG_SYS_HZ; /* set count value */ offset = pwm_id * 3; diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c index 359c21f5e0..bb0e795e66 100644 --- a/arch/arm/cpu/armv7/s5p-common/timer.c +++ b/arch/arm/cpu/armv7/s5p-common/timer.c @@ -31,6 +31,8 @@ DECLARE_GLOBAL_DATA_PTR; +unsigned long get_current_tick(void); + /* macro to read the 16 bit timer */ static inline struct s5p_timer *s5p_get_base_timer(void) { @@ -44,6 +46,8 @@ int timer_init(void) pwm_config(4, 0, 0); pwm_enable(4); + reset_timer_masked(); + return 0; } @@ -72,16 +76,16 @@ void __udelay(unsigned long usec) * 3. finish normalize. */ tmo = usec / 1000; - tmo *= (CONFIG_SYS_HZ * count_value / 10); + tmo *= (CONFIG_SYS_HZ * count_value); tmo /= 1000; } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CONFIG_SYS_HZ * count_value / 10; + tmo = usec * CONFIG_SYS_HZ * count_value; tmo /= (1000 * 1000); } /* get current timestamp */ - tmp = get_timer(0); + tmp = get_current_tick(); /* if setting this fordward will roll time stamp */ /* reset "advancing" timestamp to 0, set lastinc value */ @@ -92,7 +96,7 @@ void __udelay(unsigned long usec) tmo += tmp; /* loop till event */ - while (get_timer_masked() < tmo) + while (get_current_tick() < tmo) ; /* nop */ } @@ -108,6 +112,14 @@ void reset_timer_masked(void) unsigned long get_timer_masked(void) { struct s5p_timer *const timer = s5p_get_base_timer(); + unsigned long count_value = readl(&timer->tcntb4); + + return get_current_tick() / count_value; +} + +unsigned long get_current_tick(void) +{ + struct s5p_timer *const timer = s5p_get_base_timer(); unsigned long now = readl(&timer->tcnto4); unsigned long count_value = readl(&timer->tcntb4); diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index aee27fdc4d..32658eb7a5 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -133,7 +133,6 @@ reset: orr r0, r0, #0xd3 msr cpsr,r0 -#if !defined(CONFIG_TEGRA2) /* * Setup vector: * (OMAP4 spl TEXT_BASE is not 32 byte aligned. @@ -149,7 +148,6 @@ reset: ldr r0, =_start mcr p15, 0, r0, c12, c0, 0 @Set VBAR #endif -#endif /* !Tegra2 */ /* the mask ROM code should have PLL and others stable */ #ifndef CONFIG_SKIP_LOWLEVEL_INIT @@ -282,14 +280,14 @@ jump_2_ram: /* * Move vector table */ -#if !defined(CONFIG_TEGRA2) +#if !defined(CONFIG_TEGRA20) #if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) /* Set vector address in CP15 VBAR register */ ldr r0, =_start add r0, r0, r9 mcr p15, 0, r0, c12, c0, 0 @Set VBAR #endif -#endif /* !Tegra2 */ +#endif /* !Tegra20 */ ldr r0, _board_init_r_ofs adr r1, _start @@ -307,6 +305,20 @@ ENDPROC(relocate_code) /************************************************************************* * + * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) + * __attribute__((weak)); + * + * Stack pointer is not yet initialized at this moment + * Don't save anything to stack even if compiled with -O0 + * + *************************************************************************/ +ENTRY(save_boot_params) + bx lr @ back to my caller +ENDPROC(save_boot_params) + .weak save_boot_params + +/************************************************************************* + * * cpu_init_cp15 * * Setup CP15 registers (cache, MMU, TLBs). The I-cache is turned on unless diff --git a/arch/arm/cpu/armv7/tegra2/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile index 80da4536d3..5f4035d79c 100644 --- a/arch/arm/cpu/armv7/tegra2/Makefile +++ b/arch/arm/cpu/armv7/tegra20/Makefile @@ -23,27 +23,16 @@ # MA 02111-1307 USA # -# The AVP is ARMv4T architecture so we must use special compiler -# flags for any startup files it might use. -CFLAGS_arch/arm/cpu/armv7/tegra2/ap20.o += -march=armv4t -CFLAGS_arch/arm/cpu/armv7/tegra2/clock.o += -march=armv4t -CFLAGS_arch/arm/cpu/armv7/tegra2/warmboot_avp.o += -march=armv4t - include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -SOBJS := lowlevel_init.o -COBJS-y := ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o -COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o -COBJS-$(CONFIG_TEGRA_PMU) += pmu.o COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o -COBJS-$(CONFIG_TEGRA2_LP0) += crypto.o warmboot.o warmboot_avp.o COBJS-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o COBJS := $(COBJS-y) -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) all: $(obj).depend $(LIB) diff --git a/arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c b/arch/arm/cpu/armv7/tegra20/cmd_enterrcm.c index 2fcd107df5..75cadb03ec 100644 --- a/arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c +++ b/arch/arm/cpu/armv7/tegra20/cmd_enterrcm.c @@ -40,13 +40,13 @@ */ #include <common.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/pmc.h> static int do_enterrcm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; puts("Entering RCM...\n"); udelay(50000); diff --git a/arch/arm/cpu/armv7/tegra2/config.mk b/arch/arm/cpu/armv7/tegra20/config.mk index 4dd8cb8442..6432e754e8 100644 --- a/arch/arm/cpu/armv7/tegra2/config.mk +++ b/arch/arm/cpu/armv7/tegra20/config.mk @@ -23,16 +23,4 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # - -# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build these -# files with compatible flags -ifdef CONFIG_TEGRA2 -CFLAGS_arch/arm/lib/board.o += -march=armv4t -CFLAGS_arch/arm/lib/memset.o += -march=armv4t -CFLAGS_lib/string.o += -march=armv4t -CFLAGS_common/cmd_nvedit.o += -march=armv4t -endif - -USE_PRIVATE_LIBGCC = yes - CONFIG_ARCH_DEVICE_TREE := tegra20 diff --git a/arch/arm/cpu/armv7/tegra2/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c index 5f2b243750..178bb130c2 100644 --- a/arch/arm/cpu/armv7/tegra2/usb.c +++ b/arch/arm/cpu/armv7/tegra20/usb.c @@ -24,7 +24,7 @@ #include <common.h> #include <asm/io.h> #include <asm-generic/gpio.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/clk_rst.h> #include <asm/arch/clock.h> #include <asm/arch/gpio.h> diff --git a/arch/arm/cpu/armv7/u8500/Makefile b/arch/arm/cpu/armv7/u8500/Makefile index 270aa40c88..ce8af96038 100644 --- a/arch/arm/cpu/armv7/u8500/Makefile +++ b/arch/arm/cpu/armv7/u8500/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = timer.o clock.o +COBJS = timer.o clock.o prcmu.o cpu.o SOBJS = lowlevel.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/u8500/clock.c b/arch/arm/cpu/armv7/u8500/clock.c index 9e3b87394d..fcfd61a1f4 100644 --- a/arch/arm/cpu/armv7/u8500/clock.c +++ b/arch/arm/cpu/armv7/u8500/clock.c @@ -54,3 +54,37 @@ void u8500_clock_enable(int periph, int cluster, int kern) if (cluster != -1) writel(1 << cluster, &clkrst->pcken); } + +void db8500_clocks_init(void) +{ + /* + * Enable all clocks. This is u-boot, we can enable it all. There is no + * powersave in u-boot. + */ + + u8500_clock_enable(1, 9, -1); /* GPIO0 */ + u8500_clock_enable(2, 11, -1);/* GPIO1 */ + u8500_clock_enable(3, 8, -1); /* GPIO2 */ + u8500_clock_enable(5, 1, -1); /* GPIO3 */ + u8500_clock_enable(3, 6, 6); /* UART2 */ + u8500_clock_enable(3, 3, 3); /* I2C0 */ + u8500_clock_enable(1, 5, 5); /* SDI0 */ + u8500_clock_enable(2, 4, 2); /* SDI4 */ + u8500_clock_enable(6, 6, -1); /* MTU0 */ + u8500_clock_enable(3, 4, 4); /* SDI2 */ + + /* + * Enabling clocks for all devices which are AMBA devices in the + * kernel. Otherwise they will not get probe()'d because the + * peripheral ID register will not be powered. + */ + + /* XXX: some of these differ between ED/V1 */ + + u8500_clock_enable(1, 1, 1); /* UART1 */ + u8500_clock_enable(1, 0, 0); /* UART0 */ + u8500_clock_enable(3, 2, 2); /* SSP1 */ + u8500_clock_enable(3, 1, 1); /* SSP0 */ + u8500_clock_enable(2, 8, -1); /* SPI0 */ + u8500_clock_enable(2, 5, 3); /* MSP2 */ +} diff --git a/arch/arm/cpu/armv7/u8500/cpu.c b/arch/arm/cpu/armv7/u8500/cpu.c new file mode 100644 index 0000000000..6f95c30673 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/cpu.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) 2012 Linaro Limited + * Mathieu Poirier <mathieu.poirier@linaro.org> + * + * Based on original code from Joakim Axelsson at ST-Ericsson + * (C) Copyright 2010 ST-Ericsson + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/prcmu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> + +#include <asm/arch/hardware.h> + +#define CPUID_DB8500V1 0x411fc091 +#define CPUID_DB8500V2 0x412fc091 +#define ASICID_DB8500V11 0x008500A1 + +#define CACHE_CONTR_BASE 0xA0412000 +/* Cache controller register offsets + * as found in ARM's technical reference manual + */ +#define CACHE_INVAL_BY_WAY (CACHE_CONTR_BASE + 0x77C) +#define CACHE_LOCKDOWN_BY_D (CACHE_CONTR_BASE + 0X900) +#define CACHE_LOCKDOWN_BY_I (CACHE_CONTR_BASE + 0X904) + +static unsigned int read_asicid(void); + +static inline unsigned int read_cpuid(void) +{ + unsigned int val; + + /* Main ID register (MIDR) */ + asm("mrc p15, 0, %0, c0, c0, 0" + : "=r" (val) + : + : "cc"); + + return val; +} + +static int cpu_is_u8500v11(void) +{ + return read_asicid() == ASICID_DB8500V11; +} + +static int cpu_is_u8500v2(void) +{ + return read_cpuid() == CPUID_DB8500V2; +} + +static unsigned int read_asicid(void) +{ + unsigned int *address; + + if (cpu_is_u8500v2()) + address = (void *) U8500_ASIC_ID_LOC_V2; + else + address = (void *) U8500_ASIC_ID_LOC_ED_V1; + + return readl(address); +} + +void cpu_cache_initialization(void) +{ + unsigned int value; + /* invalidate all cache entries */ + writel(0xFFFF, CACHE_INVAL_BY_WAY); + + /* ways are set to '0' when they are totally + * cleaned and invalidated + */ + do { + value = readl(CACHE_INVAL_BY_WAY); + } while (value & 0xFF); + + /* Invalidate register 9 D and I lockdown */ + writel(0xFF, CACHE_LOCKDOWN_BY_D); + writel(0xFF, CACHE_LOCKDOWN_BY_I); +} + +#ifdef CONFIG_ARCH_CPU_INIT +/* + * SOC specific cpu init + */ +int arch_cpu_init(void) +{ + db8500_prcmu_init(); + db8500_clocks_init(); + + return 0; +} +#endif /* CONFIG_ARCH_CPU_INIT */ + +#ifdef CONFIG_MMC + +int u8500_mmc_power_init(void) +{ + int ret; + int enable, voltage; + int ab8500_revision; + + if (!cpu_is_u8500v11() && !cpu_is_u8500v2()) + return 0; + + /* Get AB8500 revision */ + ret = ab8500_read(AB8500_MISC, AB8500_REV_REG); + if (ret < 0) + goto out; + + ab8500_revision = ret; + + /* + * On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD + * card to work. This is done by enabling the regulators in the AB8500 + * via PRCMU I2C transactions. + * + * This code is derived from the handling of AB8500_LDO_VAUX3 in + * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux. + * + * Turn off and delay is required to have it work across soft reboots. + */ + + /* Turn off (read-modify-write) */ + ret = ab8500_read(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG); + if (ret < 0) + goto out; + + enable = ret; + + /* Turn off */ + ret = ab8500_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG, + enable & ~LDO_VAUX3_ENABLE_MASK); + if (ret < 0) + goto out; + + udelay(10 * 1000); + + /* Set the voltage to 2.91 V or 2.9 V without overriding VRF1 value */ + ret = ab8500_read(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_SEL_REG); + if (ret < 0) + goto out; + + voltage = ret; + + if (ab8500_revision < 0x20) { + voltage &= ~LDO_VAUX3_SEL_MASK; + voltage |= LDO_VAUX3_SEL_2V9; + } else { + voltage &= ~LDO_VAUX3_V2_SEL_MASK; + voltage |= LDO_VAUX3_V2_SEL_2V91; + } + + ret = ab8500_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_SEL_REG, voltage); + if (ret < 0) + goto out; + + /* Turn on the supply */ + enable &= ~LDO_VAUX3_ENABLE_MASK; + enable |= LDO_VAUX3_ENABLE_VAL; + + ret = ab8500_write(AB8500_REGU_CTRL2, + AB8500_REGU_VRF1VAUX3_REGU_REG, enable); + +out: + return ret; +} +#endif /* CONFIG_MMC */ diff --git a/board/st-ericsson/u8500/prcmu.c b/arch/arm/cpu/armv7/u8500/prcmu.c index 6f9302f4ab..934428fb89 100644 --- a/board/st-ericsson/u8500/prcmu.c +++ b/arch/arm/cpu/armv7/u8500/prcmu.c @@ -33,13 +33,15 @@ #include <asm/types.h> #include <asm/io.h> #include <asm/errno.h> - -#include "prcmu-fw.h" +#include <asm/arch/prcmu.h> /* CPU mailbox registers */ -#define PRCM_MBOX_CPU_VAL (U8500_PRCMU_BASE + 0x0fc) -#define PRCM_MBOX_CPU_SET (U8500_PRCMU_BASE + 0x100) -#define PRCM_MBOX_CPU_CLR (U8500_PRCMU_BASE + 0x104) +#define PRCMU_I2C_WRITE(slave) \ + (((slave) << 1) | I2CWRITE | (1 << 6)) +#define PRCMU_I2C_READ(slave) \ + (((slave) << 1) | I2CREAD | (1 << 6)) + +#define I2C_MBOX_BIT (1 << 5) static int prcmu_is_ready(void) { @@ -49,26 +51,39 @@ static int prcmu_is_ready(void) return ready; } -static int _wait_for_req_complete(int num) +static int wait_for_i2c_mbx_rdy(void) { - int timeout = 1000; + int timeout = 10000; - /* checking any already on-going transaction */ - while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--) - ; + if (readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) { + printf("prcmu: warning i2c mailbox was not acked\n"); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + } - timeout = 1000; + /* check any already on-going transaction */ + while ((readl(PRCM_MBOX_CPU_VAL) & I2C_MBOX_BIT) && timeout) + timeout--; + + if (timeout == 0) + return -1; + + return 0; +} + +static int wait_for_i2c_req_done(void) +{ + int timeout = 10000; /* Set an interrupt to XP70 */ - writel(1 << num, PRCM_MBOX_CPU_SET); + writel(I2C_MBOX_BIT, PRCM_MBOX_CPU_SET); - while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--) - ; + /* wait for mailbox 5 (i2c) ack */ + while (!(readl(PRCM_ARM_IT1_VAL) & I2C_MBOX_BIT) && timeout) + timeout--; - if (!timeout) { - printf("PRCMU operation timed out\n"); + if (timeout == 0) return -1; - } return 0; } @@ -83,6 +98,7 @@ int prcmu_i2c_read(u8 reg, u16 slave) { uint8_t i2c_status; uint8_t i2c_val; + int ret; if (!prcmu_is_ready()) return -1; @@ -90,13 +106,23 @@ int prcmu_i2c_read(u8 reg, u16 slave) debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n", reg, slave); + ret = wait_for_i2c_mbx_rdy(); + if (ret) { + printf("prcmu_i2c_read: mailbox became not ready\n"); + return ret; + } + /* prepare the data for mailbox 5 */ - writeb((reg << 1) | I2CREAD, PRCM_REQ_MB5_I2COPTYPE_REG); + writeb(PRCMU_I2C_READ(reg), PRCM_REQ_MB5_I2COPTYPE_REG); writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); writeb(slave, PRCM_REQ_MB5_I2CSLAVE); writeb(0, PRCM_REQ_MB5_I2CVAL); - _wait_for_req_complete(REQ_MB5); + ret = wait_for_i2c_req_done(); + if (ret) { + printf("prcmu_i2c_read: mailbox request timed out\n"); + return ret; + } /* retrieve values */ debug("ack-mb5:transfer status = %x\n", @@ -108,16 +134,14 @@ int prcmu_i2c_read(u8 reg, u16 slave) i2c_status = readb(PRCM_ACK_MB5_STATUS); i2c_val = readb(PRCM_ACK_MB5_VAL); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); if (i2c_status == I2C_RD_OK) return i2c_val; - else { - - printf("prcmu_i2c_read:read return status= %d\n", - i2c_status); - return -1; - } + printf("prcmu_i2c_read:read return status= %d\n", i2c_status); + return -1; } /** @@ -130,6 +154,7 @@ int prcmu_i2c_read(u8 reg, u16 slave) int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data) { uint8_t i2c_status; + int ret; if (!prcmu_is_ready()) return -1; @@ -137,14 +162,23 @@ int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data) debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n", reg, slave); + ret = wait_for_i2c_mbx_rdy(); + if (ret) { + printf("prcmu_i2c_write: mailbox became not ready\n"); + return ret; + } + /* prepare the data for mailbox 5 */ - writeb((reg << 1) | I2CWRITE, PRCM_REQ_MB5_I2COPTYPE_REG); + writeb(PRCMU_I2C_WRITE(reg), PRCM_REQ_MB5_I2COPTYPE_REG); writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS); writeb(slave, PRCM_REQ_MB5_I2CSLAVE); writeb(reg_data, PRCM_REQ_MB5_I2CVAL); - debug("\ncpu_is_u8500v11\n"); - _wait_for_req_complete(REQ_MB5); + ret = wait_for_i2c_req_done(); + if (ret) { + printf("prcmu_i2c_write: mailbox request timed out\n"); + return ret; + } /* retrieve values */ debug("ack-mb5:transfer status = %x\n", @@ -156,10 +190,40 @@ int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data) i2c_status = readb(PRCM_ACK_MB5_STATUS); debug("\ni2c_status = %x\n", i2c_status); + /* clear mailbox 5 ack irq */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); + if (i2c_status == I2C_WR_OK) return 0; - else { - printf("ape-i2c: i2c_status : 0x%x\n", i2c_status); - return -1; - } + + printf("%s: i2c_status : 0x%x\n", __func__, i2c_status); + return -1; +} + +void u8500_prcmu_enable(u32 *reg) +{ + writel(readl(reg) | (1 << 8), reg); +} + +void db8500_prcmu_init(void) +{ + /* Enable timers */ + writel(1 << 17, PRCM_TCR); + + u8500_prcmu_enable((u32 *)PRCM_PER1CLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_PER2CLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_PER3CLK_MGT_REG); + /* PER4CLK does not exist */ + u8500_prcmu_enable((u32 *)PRCM_PER5CLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_PER6CLK_MGT_REG); + /* Only exists in ED but is always ok to write to */ + u8500_prcmu_enable((u32 *)PRCM_PER7CLK_MGT_REG); + + u8500_prcmu_enable((u32 *)PRCM_UARTCLK_MGT_REG); + u8500_prcmu_enable((u32 *)PRCM_I2CCLK_MGT_REG); + + u8500_prcmu_enable((u32 *)PRCM_SDMMCCLK_MGT_REG); + + /* Clean up the mailbox interrupts after pre-u-boot code. */ + writel(I2C_MBOX_BIT, PRCM_ARM_IT1_CLEAR); } diff --git a/arch/arm/cpu/tegra20-common/Makefile b/arch/arm/cpu/tegra20-common/Makefile new file mode 100644 index 0000000000..43c96c6864 --- /dev/null +++ b/arch/arm/cpu/tegra20-common/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2010,2011 Nvidia Corporation. +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +# The AVP is ARMv4T architecture so we must use special compiler +# flags for any startup files it might use. +CFLAGS_arch/arm/cpu/tegra20-common/warmboot_avp.o += -march=armv4t + +LIB = $(obj)lib$(SOC)-common.o + +SOBJS += lowlevel_init.o +COBJS-y += ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o +COBJS-$(CONFIG_TEGRA20_LP0) += warmboot.o crypto.o warmboot_avp.o +COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o +COBJS-$(CONFIG_TEGRA_PMU) += pmu.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/tegra20-common/ap20.c b/arch/arm/cpu/tegra20-common/ap20.c new file mode 100644 index 0000000000..00588dae52 --- /dev/null +++ b/arch/arm/cpu/tegra20-common/ap20.c @@ -0,0 +1,131 @@ +/* +* (C) Copyright 2010-2011 +* NVIDIA Corporation <www.nvidia.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ +#include <asm/io.h> +#include <asm/arch/ap20.h> +#include <asm/arch/fuse.h> +#include <asm/arch/gp_padctrl.h> +#include <asm/arch/pmc.h> +#include <asm/arch/scu.h> +#include <asm/arch/warmboot.h> +#include <common.h> + +int tegra_get_chip_type(void) +{ + struct apb_misc_gp_ctlr *gp; + struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE; + uint tegra_sku_id, rev; + + /* + * This is undocumented, Chip ID is bits 15:8 of the register + * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for + * Tegra30 + */ + gp = (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE; + rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; + + tegra_sku_id = readl(&fuse->sku_info) & 0xff; + + switch (rev) { + case CHIPID_TEGRA20: + switch (tegra_sku_id) { + case SKU_ID_T20: + return TEGRA_SOC_T20; + case SKU_ID_T25SE: + case SKU_ID_AP25: + case SKU_ID_T25: + case SKU_ID_AP25E: + case SKU_ID_T25E: + return TEGRA_SOC_T25; + } + break; + } + /* unknown sku id */ + return TEGRA_SOC_UNKNOWN; +} + +static void enable_scu(void) +{ + struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; + u32 reg; + + /* If SCU already setup/enabled, return */ + if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE) + return; + + /* Invalidate all ways for all processors */ + writel(0xFFFF, &scu->scu_inv_all); + + /* Enable SCU - bit 0 */ + reg = readl(&scu->scu_ctrl); + reg |= SCU_CTRL_ENABLE; + writel(reg, &scu->scu_ctrl); +} + +static u32 get_odmdata(void) +{ + /* + * ODMDATA is stored in the BCT in IRAM by the BootROM. + * The BCT start and size are stored in the BIT in IRAM. + * Read the data @ bct_start + (bct_size - 12). This works + * on T20 and T30 BCTs, which are locked down. If this changes + * in new chips (T114, etc.), we can revisit this algorithm. + */ + + u32 bct_start, odmdata; + + bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR); + odmdata = readl(bct_start + BCT_ODMDATA_OFFSET); + + return odmdata; +} + +static void init_pmc_scratch(void) +{ + struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; + u32 odmdata; + int i; + + /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */ + for (i = 0; i < 23; i++) + writel(0, &pmc->pmc_scratch1+i); + + /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */ + odmdata = get_odmdata(); + writel(odmdata, &pmc->pmc_scratch20); +} + +void s_init(void) +{ + /* Init PMC scratch memory */ + init_pmc_scratch(); + + enable_scu(); + + /* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */ + asm volatile( + "mrc p15, 0, r0, c1, c0, 1\n" + "orr r0, r0, #0x41\n" + "mcr p15, 0, r0, c1, c0, 1\n"); + + /* FIXME: should have ap20's L2 disabled too? */ +} diff --git a/arch/arm/cpu/armv7/tegra2/board.c b/arch/arm/cpu/tegra20-common/board.c index 923678d063..598023aba9 100644 --- a/arch/arm/cpu/armv7/tegra2/board.c +++ b/arch/arm/cpu/tegra20-common/board.c @@ -23,12 +23,12 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/ap20.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pmc.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> +#include <asm/arch/warmboot.h> DECLARE_GLOBAL_DATA_PTR; @@ -47,7 +47,7 @@ enum { unsigned int query_sdram_size(void) { - struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; u32 reg; reg = readl(&pmc->pmc_scratch20); @@ -80,33 +80,12 @@ int checkboard(void) } #endif /* CONFIG_DISPLAY_BOARDINFO */ -#ifdef CONFIG_ARCH_CPU_INIT -/* - * Note this function is executed by the ARM7TDMI AVP. It does not return - * in this case. It is also called once the A9 starts up, but does nothing in - * that case. - */ -int arch_cpu_init(void) -{ - /* Fire up the Cortex A9 */ - tegra2_start(); - - /* We didn't do this init in start.S, so do it now */ - cpu_init_cp15(); - - /* Initialize essential common plls */ - clock_early_init(); - - return 0; -} -#endif - static int uart_configs[] = { -#if defined(CONFIG_TEGRA2_UARTA_UAA_UAB) +#if defined(CONFIG_TEGRA20_UARTA_UAA_UAB) FUNCMUX_UART1_UAA_UAB, -#elif defined(CONFIG_TEGRA2_UARTA_GPU) +#elif defined(CONFIG_TEGRA20_UARTA_GPU) FUNCMUX_UART1_GPU, -#elif defined(CONFIG_TEGRA2_UARTA_SDIO1) +#elif defined(CONFIG_TEGRA20_UARTA_SDIO1) FUNCMUX_UART1_SDIO1, #else FUNCMUX_UART1_IRRX_IRTX, @@ -146,13 +125,13 @@ void board_init_uart_f(void) { int uart_ids = 0; /* bit mask of which UART ids to enable */ -#ifdef CONFIG_TEGRA2_ENABLE_UARTA +#ifdef CONFIG_TEGRA20_ENABLE_UARTA uart_ids |= UARTA; #endif -#ifdef CONFIG_TEGRA2_ENABLE_UARTB +#ifdef CONFIG_TEGRA20_ENABLE_UARTB uart_ids |= UARTB; #endif -#ifdef CONFIG_TEGRA2_ENABLE_UARTD +#ifdef CONFIG_TEGRA20_ENABLE_UARTD uart_ids |= UARTD; #endif setup_uarts(uart_ids); diff --git a/arch/arm/cpu/armv7/tegra2/clock.c b/arch/arm/cpu/tegra20-common/clock.c index 602589cde0..24038745bd 100644 --- a/arch/arm/cpu/armv7/tegra2/clock.c +++ b/arch/arm/cpu/tegra20-common/clock.c @@ -19,13 +19,13 @@ * MA 02111-1307 USA */ -/* Tegra2 Clock control functions */ +/* Tegra20 Clock control functions */ #include <asm/io.h> #include <asm/arch/clk_rst.h> #include <asm/arch/clock.h> #include <asm/arch/timer.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <common.h> #include <div64.h> #include <fdtdec.h> @@ -49,7 +49,7 @@ static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = { }; /* - * Clock types that we can use as a source. The Tegra2 has muxes for the + * Clock types that we can use as a source. The Tegra20 has muxes for the * peripheral clocks, and in most cases there are four options for the clock * source. This gives us a clock 'type' and exploits what commonality exists * in the device. @@ -848,7 +848,7 @@ void reset_cmplx_set_enable(int cpu, int which, int reset) (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; u32 mask; - /* Form the mask, which depends on the cpu chosen. Tegra2 has 2 */ + /* Form the mask, which depends on the cpu chosen. Tegra20 has 2 */ assert(cpu >= 0 && cpu < 2); mask = which << cpu; @@ -976,7 +976,7 @@ void clock_ll_start_uart(enum periph_id periph_id) * the same but we are very cautious so we check that a valid clock ID is * provided. * - * @param clk_id Clock ID according to tegra2 device tree binding + * @param clk_id Clock ID according to tegra20 device tree binding * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid */ static enum periph_id clk_id_to_periph_id(int clk_id) diff --git a/arch/arm/cpu/armv7/tegra2/crypto.c b/arch/arm/cpu/tegra20-common/crypto.c index 5f0b240e27..5f0b240e27 100644 --- a/arch/arm/cpu/armv7/tegra2/crypto.c +++ b/arch/arm/cpu/tegra20-common/crypto.c diff --git a/arch/arm/cpu/armv7/tegra2/crypto.h b/arch/arm/cpu/tegra20-common/crypto.h index aff67e77b0..aff67e77b0 100644 --- a/arch/arm/cpu/armv7/tegra2/crypto.h +++ b/arch/arm/cpu/tegra20-common/crypto.h diff --git a/arch/arm/cpu/armv7/tegra2/emc.c b/arch/arm/cpu/tegra20-common/emc.c index c0e5c565f1..ffc05e453a 100644 --- a/arch/arm/cpu/armv7/tegra2/emc.c +++ b/arch/arm/cpu/tegra20-common/emc.c @@ -27,7 +27,7 @@ #include <asm/arch/apb_misc.h> #include <asm/arch/clock.h> #include <asm/arch/emc.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> /* * The EMC registers have shadow registers. When the EMC clock is updated diff --git a/arch/arm/cpu/armv7/tegra2/funcmux.c b/arch/arm/cpu/tegra20-common/funcmux.c index 4a31a4cf0c..8cfed645ce 100644 --- a/arch/arm/cpu/armv7/tegra2/funcmux.c +++ b/arch/arm/cpu/tegra20-common/funcmux.c @@ -19,7 +19,7 @@ * MA 02111-1307 USA */ -/* Tegra2 high-level function multiplexing */ +/* Tegra20 high-level function multiplexing */ #include <common.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> diff --git a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S b/arch/arm/cpu/tegra20-common/lowlevel_init.S index d117f23a62..d117f23a62 100644 --- a/arch/arm/cpu/armv7/tegra2/lowlevel_init.S +++ b/arch/arm/cpu/tegra20-common/lowlevel_init.S diff --git a/arch/arm/cpu/armv7/tegra2/pinmux.c b/arch/arm/cpu/tegra20-common/pinmux.c index b053f90608..70e84dfa17 100644 --- a/arch/arm/cpu/armv7/tegra2/pinmux.c +++ b/arch/arm/cpu/tegra20-common/pinmux.c @@ -19,10 +19,10 @@ * MA 02111-1307 USA */ -/* Tegra2 pin multiplexing functions */ +/* Tegra20 pin multiplexing functions */ #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/pinmux.h> #include <common.h> diff --git a/arch/arm/cpu/armv7/tegra2/pmu.c b/arch/arm/cpu/tegra20-common/pmu.c index 46738023ff..53505e9c50 100644 --- a/arch/arm/cpu/armv7/tegra2/pmu.c +++ b/arch/arm/cpu/tegra20-common/pmu.c @@ -25,7 +25,7 @@ #include <tps6586x.h> #include <asm/io.h> #include <asm/arch/ap20.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/tegra_i2c.h> #include <asm/arch/sys_proto.h> diff --git a/arch/arm/cpu/armv7/tegra2/sys_info.c b/arch/arm/cpu/tegra20-common/sys_info.c index 6d11dc16bf..1a0bb561a7 100644 --- a/arch/arm/cpu/armv7/tegra2/sys_info.c +++ b/arch/arm/cpu/tegra20-common/sys_info.c @@ -27,7 +27,7 @@ /* Print CPU information */ int print_cpuinfo(void) { - puts("TEGRA2\n"); + puts("TEGRA20\n"); /* TBD: Add printf of major/minor rev info, stepping, etc. */ return 0; diff --git a/arch/arm/cpu/armv7/tegra2/timer.c b/arch/arm/cpu/tegra20-common/timer.c index b12b12cc30..562e414012 100644 --- a/arch/arm/cpu/armv7/tegra2/timer.c +++ b/arch/arm/cpu/tegra20-common/timer.c @@ -37,7 +37,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/timer.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/cpu/armv7/tegra2/warmboot.c b/arch/arm/cpu/tegra20-common/warmboot.c index 25d896888a..809ea0133e 100644 --- a/arch/arm/cpu/armv7/tegra2/warmboot.c +++ b/arch/arm/cpu/tegra20-common/warmboot.c @@ -29,7 +29,7 @@ #include <asm/arch/clock.h> #include <asm/arch/pmc.h> #include <asm/arch/pinmux.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/fuse.h> #include <asm/arch/emc.h> #include <asm/arch/gp_padctrl.h> @@ -39,7 +39,7 @@ DECLARE_GLOBAL_DATA_PTR; #ifndef CONFIG_TEGRA_CLOCK_SCALING -#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA2_LP0" +#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA20_LP0" #endif /* @@ -139,9 +139,9 @@ int warmboot_save_sdram_params(void) u32 ram_code; struct sdram_params sdram; struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; + (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE; struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob); union scratch2_reg scratch2; union scratch4_reg scratch4; @@ -205,7 +205,7 @@ static u32 get_major_version(void) { u32 major_id; struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; + (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE; major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >> HIDREV_MAJORPREV_SHIFT; @@ -229,7 +229,7 @@ static int is_failure_analysis_mode(struct fuse_regs *fuse) static int ap20_is_odm_production_mode(void) { - struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE; + struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE; if (!is_failure_analysis_mode(fuse) && is_odm_production_mode_fuse_set(fuse)) @@ -240,7 +240,7 @@ static int ap20_is_odm_production_mode(void) static int ap20_is_production_mode(void) { - struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE; + struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE; if (get_major_version() == 0) return 1; @@ -257,11 +257,11 @@ static enum fuse_operating_mode fuse_get_operation_mode(void) { u32 chip_id; struct apb_misc_gp_ctlr *gp = - (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; + (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE; chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; - if (chip_id == CHIPID_TEGRA2) { + if (chip_id == CHIPID_TEGRA20) { if (ap20_is_odm_production_mode()) { printf("!! odm_production_mode is not supported !!\n"); return MODE_UNDEFINED; diff --git a/arch/arm/cpu/armv7/tegra2/warmboot_avp.c b/arch/arm/cpu/tegra20-common/warmboot_avp.c index 70bcd8e5f3..cd01908a46 100644 --- a/arch/arm/cpu/armv7/tegra2/warmboot_avp.c +++ b/arch/arm/cpu/tegra20-common/warmboot_avp.c @@ -29,7 +29,7 @@ #include <asm/arch/flow.h> #include <asm/arch/pinmux.h> #include <asm/arch/pmc.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/warmboot.h> #include "warmboot_avp.h" @@ -38,7 +38,7 @@ void wb_start(void) { struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; - struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; diff --git a/arch/arm/cpu/armv7/tegra2/warmboot_avp.h b/arch/arm/cpu/tegra20-common/warmboot_avp.h index 4b71c07843..4b71c07843 100644 --- a/arch/arm/cpu/armv7/tegra2/warmboot_avp.h +++ b/arch/arm/cpu/tegra20-common/warmboot_avp.h diff --git a/arch/arm/include/asm/arch-am33xx/common_def.h b/arch/arm/include/asm/arch-am33xx/common_def.h deleted file mode 100644 index aa3b554536..0000000000 --- a/arch/arm/include/asm/arch-am33xx/common_def.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * common_def.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __COMMON_DEF_H__ -#define __COMMON_DEF_H__ - -extern void enable_uart0_pin_mux(void); -extern void enable_mmc0_pin_mux(void); -extern void enable_i2c0_pin_mux(void); - -#endif/*__COMMON_DEF_H__ */ diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index a027e3128f..6cfbef76a7 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -234,6 +234,39 @@ struct vtp_reg { struct ctrl_stat { unsigned int resv1[16]; unsigned int statusreg; /* ofset 0x40 */ + unsigned int resv2[51]; + unsigned int secure_emif_sdram_config; /* offset 0x0110 */ +}; + +/* AM33XX GPIO registers */ +#define OMAP_GPIO_REVISION 0x0000 +#define OMAP_GPIO_SYSCONFIG 0x0010 +#define OMAP_GPIO_SYSSTATUS 0x0114 +#define OMAP_GPIO_IRQSTATUS1 0x002c +#define OMAP_GPIO_IRQSTATUS2 0x0030 +#define OMAP_GPIO_CTRL 0x0130 +#define OMAP_GPIO_OE 0x0134 +#define OMAP_GPIO_DATAIN 0x0138 +#define OMAP_GPIO_DATAOUT 0x013c +#define OMAP_GPIO_LEVELDETECT0 0x0140 +#define OMAP_GPIO_LEVELDETECT1 0x0144 +#define OMAP_GPIO_RISINGDETECT 0x0148 +#define OMAP_GPIO_FALLINGDETECT 0x014c +#define OMAP_GPIO_DEBOUNCE_EN 0x0150 +#define OMAP_GPIO_DEBOUNCE_VAL 0x0154 +#define OMAP_GPIO_CLEARDATAOUT 0x0190 +#define OMAP_GPIO_SETDATAOUT 0x0194 + +/* Control Device Register */ +struct ctrl_dev { + unsigned int deviceid; /* offset 0x00 */ + unsigned int resv1[11]; + unsigned int macid0l; /* offset 0x30 */ + unsigned int macid0h; /* offset 0x34 */ + unsigned int macid1l; /* offset 0x38 */ + unsigned int macid1h; /* offset 0x3c */ + unsigned int resv2[4]; + unsigned int miisel; /* offset 0x50 */ }; #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 388336f9d7..6b22c45f77 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -20,158 +20,104 @@ #define _DDR_DEFS_H #include <asm/arch/hardware.h> +#include <asm/emif.h> /* AM335X EMIF Register values */ -#define EMIF_SDMGT 0x80000000 -#define EMIF_SDRAM 0x00004650 -#define EMIF_PHYCFG 0x2 -#define DDR_PHY_RESET (0x1 << 10) -#define DDR_FUNCTIONAL_MODE_EN 0x1 -#define DDR_PHY_READY (0x1 << 2) #define VTP_CTRL_READY (0x1 << 5) #define VTP_CTRL_ENABLE (0x1 << 6) -#define VTP_CTRL_LOCK_EN (0x1 << 4) #define VTP_CTRL_START_EN (0x1) -#define DDR2_RATIO 0x80 -#define CMD_FORCE 0x00 -#define CMD_DELAY 0x00 - -#define EMIF_READ_LATENCY 0x05 -#define EMIF_TIM1 0x0666B3D6 -#define EMIF_TIM2 0x143731DA -#define EMIF_TIM3 0x00000347 -#define EMIF_SDCFG 0x43805332 -#define EMIF_SDREF 0x0000081a +#define PHY_DLL_LOCK_DIFF 0x0 +#define DDR_CKE_CTRL_NORMAL 0x1 + +#define DDR2_EMIF_READ_LATENCY 0x100005 /* Enable Dynamic Power Down */ +#define DDR2_EMIF_TIM1 0x0666B3C9 +#define DDR2_EMIF_TIM2 0x243631CA +#define DDR2_EMIF_TIM3 0x0000033F +#define DDR2_EMIF_SDCFG 0x41805332 +#define DDR2_EMIF_SDREF 0x0000081a #define DDR2_DLL_LOCK_DIFF 0x0 -#define DDR2_RD_DQS 0x12 -#define DDR2_PHY_FIFO_WE 0x80 - +#define DDR2_RATIO 0x80 #define DDR2_INVERT_CLKOUT 0x00 +#define DDR2_RD_DQS 0x12 #define DDR2_WR_DQS 0x00 #define DDR2_PHY_WRLVL 0x00 #define DDR2_PHY_GATELVL 0x00 #define DDR2_PHY_WR_DATA 0x40 -#define PHY_RANK0_DELAY 0x01 -#define PHY_DLL_LOCK_DIFF 0x0 -#define DDR_IOCTRL_VALUE 0x18B - -/** - * This structure represents the EMIF registers on AM33XX devices. - */ -struct emif_regs { - unsigned int sdrrev; /* offset 0x00 */ - unsigned int sdrstat; /* offset 0x04 */ - unsigned int sdrcr; /* offset 0x08 */ - unsigned int sdrcr2; /* offset 0x0C */ - unsigned int sdrrcr; /* offset 0x10 */ - unsigned int sdrrcsr; /* offset 0x14 */ - unsigned int sdrtim1; /* offset 0x18 */ - unsigned int sdrtim1sr; /* offset 0x1C */ - unsigned int sdrtim2; /* offset 0x20 */ - unsigned int sdrtim2sr; /* offset 0x24 */ - unsigned int sdrtim3; /* offset 0x28 */ - unsigned int sdrtim3sr; /* offset 0x2C */ - unsigned int res1[2]; - unsigned int sdrmcr; /* offset 0x38 */ - unsigned int sdrmcsr; /* offset 0x3C */ - unsigned int res2[8]; - unsigned int sdritr; /* offset 0x60 */ - unsigned int res3[32]; - unsigned int ddrphycr; /* offset 0xE4 */ - unsigned int ddrphycsr; /* offset 0xE8 */ - unsigned int ddrphycr2; /* offset 0xEC */ -}; - -/** - * Encapsulates DDR PHY control and corresponding shadow registers. - */ -struct ddr_phy_control { - unsigned long reg; - unsigned long reg_sh; - unsigned long reg2; -}; - -/** - * Encapsulates SDRAM timing and corresponding shadow registers. - */ -struct sdram_timing { - unsigned long time1; - unsigned long time1_sh; - unsigned long time2; - unsigned long time2_sh; - unsigned long time3; - unsigned long time3_sh; -}; - -/** - * Encapsulates SDRAM configuration. - * (Includes refresh control registers) */ -struct sdram_config { - unsigned long sdrcr; - unsigned long sdrcr2; - unsigned long refresh; - unsigned long refresh_sh; -}; +#define DDR2_PHY_FIFO_WE 0x80 +#define DDR2_PHY_RANK0_DELAY 0x1 +#define DDR2_IOCTRL_VALUE 0x18B + +/* Micron MT41J128M16JT-125 */ +#define DDR3_EMIF_READ_LATENCY 0x06 +#define DDR3_EMIF_TIM1 0x0888A39B +#define DDR3_EMIF_TIM2 0x26337FDA +#define DDR3_EMIF_TIM3 0x501F830F +#define DDR3_EMIF_SDCFG 0x61C04AB2 +#define DDR3_EMIF_SDREF 0x0000093B +#define DDR3_ZQ_CFG 0x50074BE4 +#define DDR3_DLL_LOCK_DIFF 0x1 +#define DDR3_RATIO 0x40 +#define DDR3_INVERT_CLKOUT 0x1 +#define DDR3_RD_DQS 0x3B +#define DDR3_WR_DQS 0x85 +#define DDR3_PHY_WR_DATA 0xC1 +#define DDR3_PHY_FIFO_WE 0x100 +#define DDR3_IOCTRL_VALUE 0x18B /** * Configure SDRAM */ -int config_sdram(struct sdram_config *cfg); +void config_sdram(const struct emif_regs *regs); /** * Set SDRAM timings */ -int set_sdram_timings(struct sdram_timing *val); +void set_sdram_timings(const struct emif_regs *regs); /** * Configure DDR PHY */ -int config_ddr_phy(struct ddr_phy_control *cfg); +void config_ddr_phy(const struct emif_regs *regs); /** * This structure represents the DDR registers on AM33XX devices. + * We make use of DDR_PHY_BASE_ADDR2 to address the DATA1 registers that + * correspond to DATA1 registers defined here. */ struct ddr_regs { unsigned int resv0[7]; unsigned int cm0csratio; /* offset 0x01C */ - unsigned int cm0csforce; /* offset 0x020 */ - unsigned int cm0csdelay; /* offset 0x024 */ + unsigned int resv1[2]; unsigned int cm0dldiff; /* offset 0x028 */ unsigned int cm0iclkout; /* offset 0x02C */ - unsigned int resv1[8]; + unsigned int resv2[8]; unsigned int cm1csratio; /* offset 0x050 */ - unsigned int cm1csforce; /* offset 0x054 */ - unsigned int cm1csdelay; /* offset 0x058 */ + unsigned int resv3[2]; unsigned int cm1dldiff; /* offset 0x05C */ unsigned int cm1iclkout; /* offset 0x060 */ - unsigned int resv2[8]; + unsigned int resv4[8]; unsigned int cm2csratio; /* offset 0x084 */ - unsigned int cm2csforce; /* offset 0x088 */ - unsigned int cm2csdelay; /* offset 0x08C */ + unsigned int resv5[2]; unsigned int cm2dldiff; /* offset 0x090 */ unsigned int cm2iclkout; /* offset 0x094 */ - unsigned int resv3[12]; + unsigned int resv6[12]; unsigned int dt0rdsratio0; /* offset 0x0C8 */ - unsigned int dt0rdsratio1; /* offset 0x0CC */ - unsigned int resv4[3]; + unsigned int resv7[4]; unsigned int dt0wdsratio0; /* offset 0x0DC */ - unsigned int dt0wdsratio1; /* offset 0x0E0 */ - unsigned int resv5[3]; + unsigned int resv8[4]; unsigned int dt0wiratio0; /* offset 0x0F0 */ - unsigned int dt0wiratio1; /* offset 0x0F4 */ + unsigned int resv9; + unsigned int dt0wimode0; /* offset 0x0F8 */ unsigned int dt0giratio0; /* offset 0x0FC */ - unsigned int dt0giratio1; /* offset 0x100 */ - unsigned int resv6[1]; + unsigned int resv10; + unsigned int dt0gimode0; /* offset 0x104 */ unsigned int dt0fwsratio0; /* offset 0x108 */ - unsigned int dt0fwsratio1; /* offset 0x10C */ - unsigned int resv7[4]; + unsigned int resv11[4]; + unsigned int dt0dqoffset; /* offset 0x11C */ unsigned int dt0wrsratio0; /* offset 0x120 */ - unsigned int dt0wrsratio1; /* offset 0x124 */ - unsigned int resv8[3]; + unsigned int resv12[4]; unsigned int dt0rdelays0; /* offset 0x134 */ unsigned int dt0dldiff0; /* offset 0x138 */ - unsigned int resv9[39]; - unsigned int dt1rdelays0; /* offset 0x1D8 */ }; /** @@ -200,29 +146,24 @@ struct cmd_control { */ struct ddr_data { unsigned long datardsratio0; - unsigned long datardsratio1; unsigned long datawdsratio0; - unsigned long datawdsratio1; unsigned long datawiratio0; - unsigned long datawiratio1; unsigned long datagiratio0; - unsigned long datagiratio1; unsigned long datafwsratio0; - unsigned long datafwsratio1; unsigned long datawrsratio0; - unsigned long datawrsratio1; + unsigned long datauserank0delay; unsigned long datadldiff0; }; /** * Configure DDR CMD control registers */ -int config_cmd_ctrl(struct cmd_control *cmd); +void config_cmd_ctrl(const struct cmd_control *cmd); /** * Configure DDR DATA registers */ -int config_ddr_data(int data_macrono, struct ddr_data *data); +void config_ddr_data(int data_macrono, const struct ddr_data *data); /** * This structure represents the DDR io control on AM33XX devices. @@ -238,20 +179,9 @@ struct ddr_cmdtctrl { }; /** - * Encapsulates DDR CMD & DATA io control registers. - */ -struct ddr_ioctrl { - unsigned long cmd1ctl; - unsigned long cmd2ctl; - unsigned long cmd3ctl; - unsigned long data1ctl; - unsigned long data2ctl; -}; - -/** * Configure DDR io control registers */ -int config_io_ctrl(struct ddr_ioctrl *ioctrl); +void config_io_ctrl(unsigned long val); struct ddr_ctrl { unsigned int ddrioctrl; @@ -259,6 +189,6 @@ struct ddr_ctrl { unsigned int ddrckectrl; }; -void config_ddr(void); +void config_ddr(short ddr_type); #endif /* _DDR_DEFS_H */ diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h new file mode 100644 index 0000000000..1a211e95e8 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/gpio.h @@ -0,0 +1,29 @@ +/* + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#ifndef _GPIO_AM33xx_H +#define _GPIO_AM33xx_H + +#include <asm/omap_gpio.h> + +#define AM33XX_GPIO0_BASE 0x44E07000 +#define AM33XX_GPIO1_BASE 0x4804C000 +#define AM33XX_GPIO2_BASE 0x481AC000 +#define AM33XX_GPIO3_BASE 0x481AE000 + +#endif /* _GPIO_AM33xx_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 0ec22eb918..62332f2ded 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -19,8 +19,9 @@ #ifndef __AM33XX_HARDWARE_H #define __AM33XX_HARDWARE_H +#include <asm/arch/omap.h> + /* Module base addresses */ -#define LOW_LEVEL_SRAM_STACK 0x4030B7FC #define UART0_BASE 0x44E09000 /* DM Timer base addresses */ @@ -46,6 +47,7 @@ /* Control Module Base Address */ #define CTRL_BASE 0x44E10000 +#define CTRL_DEVICE_BASE 0x44E10600 /* PRCM Base Address */ #define PRCM_BASE 0x44E00000 @@ -53,7 +55,6 @@ /* EMIF Base address */ #define EMIF4_0_CFG_BASE 0x4C000000 #define EMIF4_1_CFG_BASE 0x4D000000 -#define DMM_BASE 0x4E000000 /* PLL related registers */ #define CM_PER 0x44E00000 @@ -78,4 +79,8 @@ #define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400) #define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE +/* CPSW Config space */ +#define AM335X_CPSW_BASE 0x4A100000 +#define AM335X_CPSW_MDIO_BASE 0x4A101000 + #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index 26cc300e70..1f597c0eec 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -20,8 +20,7 @@ * OMAP HSMMC register definitions */ #define OMAP_HSMMC1_BASE 0x48060100 -#define OMAP_HSMMC2_BASE 0x481D8000 -#define OMAP_HSMMC3_BASE 0x47C24000 +#define OMAP_HSMMC2_BASE 0x481D8100 typedef struct hsmmc { unsigned char res1[0x10]; diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index fc2b7a5a28..850f8a551d 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -30,7 +30,6 @@ */ #define NON_SECURE_SRAM_START 0x40304000 #define NON_SECURE_SRAM_END 0x4030E000 -#define LOW_LEVEL_SRAM_STACK 0x4030B7FC /* ROM code defines */ /* Boot device */ diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 6c58f1b30f..819ea650f0 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -19,6 +19,24 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ +/* + * AM335x parts define a system EEPROM that defines certain sub-fields. + * We use these fields to in turn see what board we are on, and what + * that might require us to set or not set. + */ +#define HDR_NO_OF_MAC_ADDR 3 +#define HDR_ETH_ALEN 6 +#define HDR_NAME_LEN 8 + +struct am335x_baseboard_id { + unsigned int magic; + char name[HDR_NAME_LEN]; + char version[4]; + char serial[12]; + char config[32]; + char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; +}; + #define BOARD_REV_ID 0x0 u32 get_cpu_rev(void); @@ -28,6 +46,18 @@ u32 get_sysboot_value(void); int print_cpuinfo(void); #endif +extern struct ctrl_stat *cstat; u32 get_device_type(void); void setup_clocks_for_console(void); +void ddr_pll_config(unsigned int ddrpll_M); + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(struct am335x_baseboard_id *header); #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h index 6d97189d27..b9a93b0c8f 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h @@ -23,6 +23,8 @@ #include <asm/arch/at91cap9_matrix.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) #include <asm/arch/at91sam9g45_matrix.h> +#elif defined(CONFIG_AT91SAM9X5) +#include <asm/arch/at91sam9x5_matrix.h> #else #error "Unsupported AT91SAM9/CAP9 processor" #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h new file mode 100644 index 0000000000..0e728c96dc --- /dev/null +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -0,0 +1,170 @@ +/* + * Chip-specific header file for the AT91SAM9x5 family + * + * Copyright (C) 2012 Atmel Corporation. + * + * Definitions for the SoC: + * AT91SAM9x5 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __AT91SAM9X5_H__ +#define __AT91SAM9X5_H__ + +/* + * Peripheral identifiers/interrupts. + */ +#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define ATMEL_ID_SYS 1 /* System Controller Interrupt */ +#define ATMEL_ID_PIOAB 2 /* Parallel I/O Controller A and B */ +#define ATMEL_ID_PIOCD 3 /* Parallel I/O Controller C and D */ +#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD) */ +#define ATMEL_ID_USART0 5 /* USART 0 */ +#define ATMEL_ID_USART1 6 /* USART 1 */ +#define ATMEL_ID_USART2 7 /* USART 2 */ +#define ATMEL_ID_TWI0 9 /* Two-Wire Interface 0 */ +#define ATMEL_ID_TWI1 10 /* Two-Wire Interface 1 */ +#define ATMEL_ID_TWI2 11 /* Two-Wire Interface 2 */ +#define ATMEL_ID_HSMCI0 12 /* High Speed Multimedia Card Interface 0 */ +#define ATMEL_ID_SPI0 13 /* Serial Peripheral Interface 0 */ +#define ATMEL_ID_SPI1 14 /* Serial Peripheral Interface 1 */ +#define ATMEL_ID_UART0 15 /* UART 0 */ +#define ATMEL_ID_UART1 16 /* UART 1 */ +#define ATMEL_ID_TC01 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ +#define ATMEL_ID_PWM 18 /* Pulse Width Modulation Controller */ +#define ATMEL_ID_ADC 19 /* ADC Controller */ +#define ATMEL_ID_DMAC0 20 /* DMA Controller 0 */ +#define ATMEL_ID_DMAC1 21 /* DMA Controller 1 */ +#define ATMEL_ID_UHPHS 22 /* USB Host High Speed */ +#define ATMEL_ID_UDPHS 23 /* USB Device High Speed */ +#define ATMEL_ID_EMAC0 24 /* Ethernet MAC0 */ +#define ATMEL_ID_LCDC 25 /* LCD Controller */ +#define ATMEL_ID_HSMCI1 26 /* High Speed Multimedia Card Interface 1 */ +#define ATMEL_ID_EMAC1 27 /* Ethernet MAC1 */ +#define ATMEL_ID_SSC 28 /* Synchronous Serial Controller */ +#define ATMEL_ID_IRQ 31 /* Advanced Interrupt Controller */ + +/* + * User Peripheral physical base addresses. + */ +#define ATMEL_BASE_SPI0 0xf0000000 +#define ATMEL_BASE_SPI1 0xf0004000 +#define ATMEL_BASE_HSMCI0 0xf0008000 +#define ATMEL_BASE_HSMCI1 0xf000c000 +#define ATMEL_BASE_SSC 0xf0010000 +#define ATMEL_BASE_CAN0 0xf8000000 +#define ATMEL_BASE_CAN1 0xf8004000 +#define ATMEL_BASE_TC0 0xf8008000 +#define ATMEL_BASE_TC1 0xf8008040 +#define ATMEL_BASE_TC2 0xf8008080 +#define ATMEL_BASE_TC3 0xf800c000 +#define ATMEL_BASE_TC4 0xf800c040 +#define ATMEL_BASE_TC5 0xf800c080 +#define ATMEL_BASE_TWI0 0xf8010000 +#define ATMEL_BASE_TWI1 0xf8014000 +#define ATMEL_BASE_TWI2 0xf8018000 +#define ATMEL_BASE_USART0 0xf801c000 +#define ATMEL_BASE_USART1 0xf8020000 +#define ATMEL_BASE_USART2 0xf8024000 +#define ATMEL_BASE_USART3 0xf8028000 +#define ATMEL_BASE_EMAC0 0xf802c000 +#define ATMEL_BASE_EMAC1 0xf8030000 +#define ATMEL_BASE_PWM 0xf8034000 +#define ATMEL_BASE_LCDC 0xf8038000 +#define ATMEL_BASE_UDPHS 0xf803c000 +#define ATMEL_BASE_UART0 0xf8040000 +#define ATMEL_BASE_UART1 0xf8044000 +#define ATMEL_BASE_ISI 0xf8048000 +#define ATMEL_BASE_ADC 0xf804c000 +#define ATMEL_BASE_SYS 0xffffc000 + +/* + * System Peripherals + */ +#define ATMEL_BASE_MATRIX 0xffffde00 +#define ATMEL_BASE_PMECC 0xffffe000 +#define ATMEL_BASE_PMERRLOC 0xffffe600 +#define ATMEL_BASE_DDRSDRC 0xffffe800 +#define ATMEL_BASE_SMC 0xffffea00 +#define ATMEL_BASE_DMAC0 0xffffec00 +#define ATMEL_BASE_DMAC1 0xffffee00 +#define ATMEL_BASE_AIC 0xfffff000 +#define ATMEL_BASE_DBGU 0xfffff200 +#define ATMEL_BASE_PIOA 0xfffff400 +#define ATMEL_BASE_PIOB 0xfffff600 +#define ATMEL_BASE_PIOC 0xfffff800 +#define ATMEL_BASE_PIOD 0xfffffa00 +#define ATMEL_BASE_PMC 0xfffffc00 +#define ATMEL_BASE_RSTC 0xfffffe00 +#define ATMEL_BASE_SHDWC 0xfffffe10 +#define ATMEL_BASE_PIT 0xfffffe30 +#define ATMEL_BASE_WDT 0xfffffe40 +#define ATMEL_BASE_GPBR 0xfffffe60 +#define ATMEL_BASE_RTC 0xfffffeb0 + +/* + * Internal Memory. + */ +#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */ +#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */ +#define ATMEL_BASE_SMD 0x00400000 /* SMD Controller */ +#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */ +#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */ +#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */ + +/* 9x5 series chip id definitions */ +#define ARCH_ID_AT91SAM9X5 0x819a05a0 +#define ARCH_ID_VERSION_MASK 0x1f +#define ARCH_EXID_AT91SAM9G15 0x00000000 +#define ARCH_EXID_AT91SAM9G35 0x00000001 +#define ARCH_EXID_AT91SAM9X35 0x00000002 +#define ARCH_EXID_AT91SAM9G25 0x00000003 +#define ARCH_EXID_AT91SAM9X25 0x00000004 + +#define cpu_is_at91sam9x5() (get_chip_id() == ARCH_ID_AT91SAM9X5) +#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G15)) +#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G25)) +#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G35)) +#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9X25)) +#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \ + (get_extension_chip_id() == ARCH_EXID_AT91SAM9X35)) + +/* + * Cpu Name + */ +#define CONFIG_SYS_AT91_G15_CPU_NAME "AT91SAM9G15" +#define CONFIG_SYS_AT91_G25_CPU_NAME "AT91SAM9G25" +#define CONFIG_SYS_AT91_G35_CPU_NAME "AT91SAM9G35" +#define CONFIG_SYS_AT91_X25_CPU_NAME "AT91SAM9X25" +#define CONFIG_SYS_AT91_X35_CPU_NAME "AT91SAM9X35" +#define CONFIG_SYS_AT91_UNKNOWN_CPU "Unknown CPU type" +#define ATMEL_CPU_NAME get_cpu_name() + +/* + * Other misc defines + */ +#define ATMEL_PIO_PORTS 4 +#define CPU_HAS_PIO3 +#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ + +/* + * at91sam9x5 specific prototypes + */ +#ifndef __ASSEMBLY__ +unsigned int get_chip_id(void); +unsigned int get_extension_chip_id(void); +unsigned int has_emac1(void); +unsigned int has_emac0(void); +unsigned int has_lcdc(void); +char *get_cpu_name(void); +#endif + +#endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h new file mode 100644 index 0000000000..d6ce6fad55 --- /dev/null +++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h @@ -0,0 +1,91 @@ +/* + * Matrix-centric header file for the AT91SAM9X5 family + * + * Copyright (C) 2012 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9X5 preliminary datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __AT91SAM9X5_MATRIX_H__ +#define __AT91SAM9X5_MATRIX_H__ + +#ifndef __ASSEMBLY__ + +struct at91_matrix { + u32 mcfg[16]; + u32 scfg[16]; + u32 pras[16][2]; + u32 mrcr; /* 0x100 Master Remap Control */ + u32 filler[7]; + u32 ebicsa; + u32 filler4[47]; + u32 wpmr; + u32 wpsr; +}; + +#endif /* __ASSEMBLY__ */ + +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) +#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) +#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) +#define AT91_MATRIX_ULBT_128 (7 << 0) + +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18 + +#define AT91_MATRIX_M0PR_SHIFT 0 +#define AT91_MATRIX_M1PR_SHIFT 4 +#define AT91_MATRIX_M2PR_SHIFT 8 +#define AT91_MATRIX_M3PR_SHIFT 12 +#define AT91_MATRIX_M4PR_SHIFT 16 +#define AT91_MATRIX_M5PR_SHIFT 20 +#define AT91_MATRIX_M6PR_SHIFT 24 +#define AT91_MATRIX_M7PR_SHIFT 28 + +#define AT91_MATRIX_M8PR_SHIFT 0 /* register B */ +#define AT91_MATRIX_M9PR_SHIFT 4 /* register B */ +#define AT91_MATRIX_M10PR_SHIFT 8 /* register B */ +#define AT91_MATRIX_M11PR_SHIFT 12 /* register B */ + +#define AT91_MATRIX_RCB0 (1 << 0) +#define AT91_MATRIX_RCB1 (1 << 1) +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) + +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) +#define AT91_MATRIX_EBI_DBPD_ON (0 << 9) +#define AT91_MATRIX_EBI_DBPD_OFF (1 << 9) +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) +#define AT91_MATRIX_NFD0_ON_D0 (0 << 24) +#define AT91_MATRIX_NFD0_ON_D16 (1 << 24) +#define AT91_MATRIX_MP_OFF (0 << 25) +#define AT91_MATRIX_MP_ON (1 << 25) + +#endif diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h index 85c2889e5c..4c4ee703a6 100644 --- a/arch/arm/include/asm/arch-at91/hardware.h +++ b/arch/arm/include/asm/arch-at91/hardware.h @@ -37,6 +37,8 @@ # include <asm/arch/at91sam9rl.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) # include <asm/arch/at91sam9g45.h> +#elif defined(CONFIG_AT91SAM9X5) +# include <asm/arch/at91sam9x5.h> #elif defined(CONFIG_AT91CAP9) # include <asm/arch/at91cap9.h> #elif defined(CONFIG_AT91X40) diff --git a/arch/arm/include/asm/arch-bcm2835/gpio.h b/arch/arm/include/asm/arch-bcm2835/gpio.h new file mode 100644 index 0000000000..0e708560a6 --- /dev/null +++ b/arch/arm/include/asm/arch-bcm2835/gpio.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Vikram Narayananan + * <vikram186@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BCM2835_GPIO_H_ +#define _BCM2835_GPIO_H_ + +#define BCM2835_GPIO_BASE 0x20200000 +#define BCM2835_GPIO_COUNT 54 + +#define BCM2835_GPIO_FSEL_MASK 0x7 +#define BCM2835_GPIO_INPUT 0x0 +#define BCM2835_GPIO_OUTPUT 0x1 +#define BCM2835_GPIO_ALT0 0x4 +#define BCM2835_GPIO_ALT1 0x5 +#define BCM2835_GPIO_ALT2 0x6 +#define BCM2835_GPIO_ALT3 0x7 +#define BCM2835_GPIO_ALT4 0x3 +#define BCM2835_GPIO_ALT5 0x2 + +#define BCM2835_GPIO_COMMON_BANK(gpio) ((gpio < 32) ? 0 : 1) +#define BCM2835_GPIO_COMMON_SHIFT(gpio) (gpio & 0x1f) + +#define BCM2835_GPIO_FSEL_BANK(gpio) (gpio / 10) +#define BCM2835_GPIO_FSEL_SHIFT(gpio) ((gpio % 10) * 3) + +struct bcm2835_gpio_regs { + u32 gpfsel[6]; + u32 reserved1; + u32 gpset[2]; + u32 reserved2; + u32 gpclr[2]; + u32 reserved3; + u32 gplev[2]; + u32 reserved4; + u32 gpeds[2]; + u32 reserved5; + u32 gpren[2]; + u32 reserved6; + u32 gpfen[2]; + u32 reserved7; + u32 gphen[2]; + u32 reserved8; + u32 gplen[2]; + u32 reserved9; + u32 gparen[2]; + u32 reserved10; + u32 gppud; + u32 gppudclk[2]; +}; + +#endif /* _BCM2835_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-bcm2835/timer.h b/arch/arm/include/asm/arch-bcm2835/timer.h new file mode 100644 index 0000000000..30c70e03df --- /dev/null +++ b/arch/arm/include/asm/arch-bcm2835/timer.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BCM2835_TIMER_H +#define _BCM2835_TIMER_H + +#define BCM2835_TIMER_PHYSADDR 0x20003000 + +struct bcm2835_timer_regs { + u32 cs; + u32 clo; + u32 chi; + u32 c0; + u32 c1; + u32 c2; + u32 c3; +}; + +#define BCM2835_TIMER_CS_M3 (1 << 3) +#define BCM2835_TIMER_CS_M2 (1 << 2) +#define BCM2835_TIMER_CS_M1 (1 << 1) +#define BCM2835_TIMER_CS_M0 (1 << 0) + +#endif diff --git a/arch/arm/include/asm/arch-bcm2835/wdog.h b/arch/arm/include/asm/arch-bcm2835/wdog.h new file mode 100644 index 0000000000..303a65f32e --- /dev/null +++ b/arch/arm/include/asm/arch-bcm2835/wdog.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BCM2835_TIMER_H +#define _BCM2835_TIMER_H + +#define BCM2835_WDOG_PHYSADDR 0x20100000 + +struct bcm2835_wdog_regs { + u32 unknown0[7]; + u32 rstc; + u32 unknown1; + u32 wdog; +}; + +#define BCM2835_WDOG_PASSWORD 0x5a000000 + +#define BCM2835_WDOG_RSTC_WRCFG_MASK 0x00000030 +#define BCM2835_WDOG_RSTC_WRCFG_FULL_RESET 0x00000020 + +#define BCM2835_WDOG_WDOG_TIMEOUT_MASK 0x0000ffff + +#endif diff --git a/drivers/usb/musb/da8xx.h b/arch/arm/include/asm/arch-davinci/da8xx-usb.h index be1cdaf1dc..eb79bf8b90 100644 --- a/drivers/usb/musb/da8xx.h +++ b/arch/arm/include/asm/arch-davinci/da8xx-usb.h @@ -1,5 +1,5 @@ /* - * da8xx.h -- TI's DA8xx platform specific usb wrapper definitions. + * da8xx-usb.h -- TI's DA8xx platform specific usb wrapper definitions. * * Author: Ajay Kumar Gupta <ajay.gupta@ti.com> * @@ -26,7 +26,6 @@ #include <asm/arch/hardware.h> #include <asm/arch/gpio.h> -#include "musb_core.h" /* Base address of da8xx usb0 wrapper */ #define DA8XX_USB_OTG_BASE 0x01E00000 @@ -99,4 +98,8 @@ struct da8xx_usb_regs { #define CFGCHIP2_REFFREQ_48MHZ (3 << 0) #define DA8XX_USB_VBUS_GPIO (1 << 15) + +int usb_phy_on(void); +void usb_phy_off(void); + #endif /* __DA8XX_MUSB_H__ */ diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index b145c6e7f1..6eed6c95a7 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -306,6 +306,7 @@ typedef volatile unsigned int * dv_reg_p; void lpsc_on(unsigned int id); void lpsc_syncreset(unsigned int id); +void lpsc_disable(unsigned int id); void dsp_on(void); void davinci_enable_uart0(void); @@ -441,21 +442,51 @@ struct davinci_pllc_regs { #define davinci_pllc1_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL1_BASE) #define DAVINCI_PLLC_DIV_MASK 0x1f -#define ASYNC3 get_async3_src() -#define PLL1_SYSCLK2 ((1 << 16) | 0x2) -#define DAVINCI_SPI1_CLKID (cpu_is_da830() ? 2 : ASYNC3) -/* Clock IDs */ +/* + * A clock ID is a 32-bit number where bit 16 represents the PLL controller + * (clear is PLLC0, set is PLLC1) and the low 16 bits represent the divisor, + * counting from 1. Clock IDs may be passed to clk_get(). + */ + +/* flags to select PLL controller */ +#define DAVINCI_PLLC0_FLAG (0) +#define DAVINCI_PLLC1_FLAG (1 << 16) + enum davinci_clk_ids { - DAVINCI_SPI0_CLKID = 2, - DAVINCI_UART2_CLKID = 2, - DAVINCI_MMC_CLKID = 2, - DAVINCI_MDIO_CLKID = 4, - DAVINCI_ARM_CLKID = 6, - DAVINCI_PLLM_CLKID = 0xff, - DAVINCI_PLLC_CLKID = 0x100, - DAVINCI_AUXCLK_CLKID = 0x101 + /* + * Clock IDs for PLL outputs. Each may be switched on/off + * independently, and each may map to one or more peripherals. + */ + DAVINCI_PLL0_SYSCLK2 = DAVINCI_PLLC0_FLAG | 2, + DAVINCI_PLL0_SYSCLK4 = DAVINCI_PLLC0_FLAG | 4, + DAVINCI_PLL0_SYSCLK6 = DAVINCI_PLLC0_FLAG | 6, + DAVINCI_PLL1_SYSCLK1 = DAVINCI_PLLC1_FLAG | 1, + DAVINCI_PLL1_SYSCLK2 = DAVINCI_PLLC1_FLAG | 2, + + /* map peripherals to clock IDs */ + DAVINCI_ARM_CLKID = DAVINCI_PLL0_SYSCLK6, + DAVINCI_DDR_CLKID = DAVINCI_PLL1_SYSCLK1, + DAVINCI_MDIO_CLKID = DAVINCI_PLL0_SYSCLK4, + DAVINCI_MMC_CLKID = DAVINCI_PLL0_SYSCLK2, + DAVINCI_SPI0_CLKID = DAVINCI_PLL0_SYSCLK2, + DAVINCI_MMCSD_CLKID = DAVINCI_PLL0_SYSCLK2, + + /* special clock ID - output of PLL multiplier */ + DAVINCI_PLLM_CLKID = 0x0FF, + + /* special clock ID - output of PLL post divisor */ + DAVINCI_PLLC_CLKID = 0x100, + + /* special clock ID - PLL bypass */ + DAVINCI_AUXCLK_CLKID = 0x101, }; +#define DAVINCI_UART2_CLKID (cpu_is_da830() ? DAVINCI_PLL0_SYSCLK2 \ + : get_async3_src()) + +#define DAVINCI_SPI1_CLKID (cpu_is_da830() ? DAVINCI_PLL0_SYSCLK2 \ + : get_async3_src()) + int clk_get(enum davinci_clk_ids id); /* Boot config */ @@ -505,6 +536,7 @@ struct davinci_syscfg1_regs { ((struct davinci_syscfg1_regs *)DAVINCI_SYSCFG1_BASE) #define DDR_SLEW_CMOSEN_BIT 4 +#define DDR_SLEW_DDR_PDENA_BIT 5 #define VTP_POWERDWN (1 << 6) #define VTP_LOCK (1 << 7) @@ -570,10 +602,10 @@ static inline int cpu_is_da850(void) return ((part_no == 0xb7d1) ? 1 : 0); } -static inline int get_async3_src(void) +static inline enum davinci_clk_ids get_async3_src(void) { return (REG(&davinci_syscfg_regs->cfgchip3) & 0x10) ? - PLL1_SYSCLK2 : 2; + DAVINCI_PLL1_SYSCLK2 : DAVINCI_PLL0_SYSCLK2; } #endif /* CONFIG_SOC_DA8XX */ diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h index 07aceaab03..a851f1f50f 100644 --- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h +++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h @@ -28,6 +28,7 @@ extern const struct pinmux_config spi1_pins_base[3]; extern const struct pinmux_config spi1_pins_scs0[1]; /* UART pin muxer settings */ +extern const struct pinmux_config uart0_pins_txrx[2]; extern const struct pinmux_config uart1_pins_txrx[2]; extern const struct pinmux_config uart2_pins_txrx[2]; extern const struct pinmux_config uart2_pins_rtscts[2]; @@ -48,4 +49,7 @@ extern const struct pinmux_config emifa_pins_cs4[1]; extern const struct pinmux_config emifa_pins_nand[12]; extern const struct pinmux_config emifa_pins_nor[43]; +/* MMC pin muxer settings */ +extern const struct pinmux_config mmc0_pins[6]; + #endif diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 72dc655ec1..552902573f 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -27,6 +27,7 @@ #define EPLL 2 #define HPLL 3 #define VPLL 4 +#define BPLL 5 unsigned long get_pll_clk(int pllreg); unsigned long get_arm_clk(void); diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index 50da958034..fce38efbb2 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -273,8 +273,7 @@ struct exynos5_clock { unsigned int clkout_cmu_cpu_div_stat; unsigned char res8[0x5f8]; unsigned int armclk_stopctrl; - unsigned int atclk_stopctrl; - unsigned char res9[0x8]; + unsigned char res9[0x0c]; unsigned int parityfail_status; unsigned int parityfail_clear; unsigned char res10[0x8]; @@ -323,259 +322,283 @@ struct exynos5_clock { unsigned char res19[0xf8]; unsigned int div_core0; unsigned int div_core1; - unsigned char res20[0xf8]; + unsigned int div_sysrgt; + unsigned char res20[0xf4]; unsigned int div_stat_core0; unsigned int div_stat_core1; - unsigned char res21[0x2f8]; + unsigned int div_stat_sysrgt; + unsigned char res21[0x2f4]; unsigned int gate_ip_core; - unsigned char res22[0xfc]; + unsigned int gate_ip_sysrgt; + unsigned char res22[0x8]; + unsigned int c2c_monitor; + unsigned char res23[0xec]; unsigned int clkout_cmu_core; unsigned int clkout_cmu_core_div_stat; - unsigned char res23[0x5f8]; + unsigned char res24[0x5f8]; unsigned int dcgidx_map0; unsigned int dcgidx_map1; unsigned int dcgidx_map2; - unsigned char res24[0x14]; + unsigned char res25[0x14]; unsigned int dcgperf_map0; unsigned int dcgperf_map1; - unsigned char res25[0x18]; + unsigned char res26[0x18]; unsigned int dvcidx_map; - unsigned char res26[0x1c]; + unsigned char res27[0x1c]; unsigned int freq_cpu; unsigned int freq_dpm; - unsigned char res27[0x18]; + unsigned char res28[0x18]; unsigned int dvsemclk_en; unsigned int maxperf; - unsigned char res28[0x3478]; + unsigned char res29[0xf78]; + unsigned int c2c_config; + unsigned char res30[0x24fc]; unsigned int div_acp; - unsigned char res29[0xfc]; + unsigned char res31[0xfc]; unsigned int div_stat_acp; - unsigned char res30[0x1fc]; + unsigned char res32[0x1fc]; unsigned int gate_ip_acp; - unsigned char res31[0x1fc]; + unsigned char res33[0xfc]; + unsigned int div_syslft; + unsigned char res34[0xc]; + unsigned int div_stat_syslft; + unsigned char res35[0x1c]; + unsigned int gate_ip_syslft; + unsigned char res36[0xcc]; unsigned int clkout_cmu_acp; unsigned int clkout_cmu_acp_div_stat; - unsigned char res32[0x38f8]; + unsigned char res37[0x8]; + unsigned int ufmc_config; + unsigned char res38[0x38ec]; unsigned int div_isp0; unsigned int div_isp1; unsigned int div_isp2; - unsigned char res33[0xf4]; + unsigned char res39[0xf4]; unsigned int div_stat_isp0; unsigned int div_stat_isp1; unsigned int div_stat_isp2; - unsigned char res34[0x3f4]; + unsigned char res40[0x3f4]; unsigned int gate_ip_isp0; unsigned int gate_ip_isp1; - unsigned char res35[0xf8]; + unsigned char res41[0xf8]; unsigned int gate_sclk_isp; - unsigned char res36[0xc]; + unsigned char res42[0xc]; unsigned int mcuisp_pwr_ctrl; - unsigned char res37[0xec]; + unsigned char res43[0xec]; unsigned int clkout_cmu_isp; unsigned int clkout_cmu_isp_div_stat; - unsigned char res38[0x3618]; + unsigned char res44[0x3618]; unsigned int cpll_lock; - unsigned char res39[0xc]; + unsigned char res45[0xc]; unsigned int epll_lock; - unsigned char res40[0xc]; + unsigned char res46[0xc]; unsigned int vpll_lock; - unsigned char res41[0xdc]; + unsigned char res47[0xc]; + unsigned int gpll_lock; + unsigned char res48[0xcc]; unsigned int cpll_con0; unsigned int cpll_con1; - unsigned char res42[0x8]; + unsigned char res49[0x8]; unsigned int epll_con0; unsigned int epll_con1; unsigned int epll_con2; - unsigned char res43[0x4]; + unsigned char res50[0x4]; unsigned int vpll_con0; unsigned int vpll_con1; unsigned int vpll_con2; - unsigned char res44[0xc4]; + unsigned char res51[0x4]; + unsigned int gpll_con0; + unsigned int gpll_con1; + unsigned char res52[0xb8]; unsigned int src_top0; unsigned int src_top1; unsigned int src_top2; unsigned int src_top3; unsigned int src_gscl; - unsigned int src_disp0_0; - unsigned int src_disp0_1; + unsigned char res53[0x8]; unsigned int src_disp1_0; - unsigned int src_disp1_1; - unsigned char res46[0xc]; + unsigned char res54[0x10]; unsigned int src_mau; unsigned int src_fsys; - unsigned char res47[0x8]; + unsigned int src_gen; + unsigned char res55[0x4]; unsigned int src_peric0; unsigned int src_peric1; - unsigned char res48[0x18]; + unsigned char res56[0x18]; unsigned int sclk_src_isp; - unsigned char res49[0x9c]; + unsigned char res57[0x9c]; unsigned int src_mask_top; - unsigned char res50[0xc]; + unsigned char res58[0xc]; unsigned int src_mask_gscl; - unsigned int src_mask_disp0_0; - unsigned int src_mask_disp0_1; + unsigned char res59[0x8]; unsigned int src_mask_disp1_0; - unsigned int src_mask_disp1_1; - unsigned int src_mask_maudio; - unsigned char res52[0x8]; + unsigned char res60[0x4]; + unsigned int src_mask_mau; + unsigned char res61[0x8]; unsigned int src_mask_fsys; - unsigned char res53[0xc]; + unsigned int src_mask_gen; + unsigned char res62[0x8]; unsigned int src_mask_peric0; unsigned int src_mask_peric1; - unsigned char res54[0x18]; + unsigned char res63[0x18]; unsigned int src_mask_isp; - unsigned char res55[0x9c]; + unsigned char res67[0x9c]; unsigned int mux_stat_top0; unsigned int mux_stat_top1; unsigned int mux_stat_top2; unsigned int mux_stat_top3; - unsigned char res56[0xf0]; + unsigned char res68[0xf0]; unsigned int div_top0; unsigned int div_top1; - unsigned char res57[0x8]; + unsigned char res69[0x8]; unsigned int div_gscl; - unsigned int div_disp0_0; - unsigned int div_disp0_1; + unsigned char res70[0x8]; unsigned int div_disp1_0; - unsigned int div_disp1_1; - unsigned char res59[0x8]; + unsigned char res71[0xc]; unsigned int div_gen; - unsigned char res60[0x4]; + unsigned char res72[0x4]; unsigned int div_mau; unsigned int div_fsys0; unsigned int div_fsys1; unsigned int div_fsys2; - unsigned int div_fsys3; + unsigned char res73[0x4]; unsigned int div_peric0; unsigned int div_peric1; unsigned int div_peric2; unsigned int div_peric3; unsigned int div_peric4; unsigned int div_peric5; - unsigned char res61[0x10]; + unsigned char res74[0x10]; unsigned int sclk_div_isp; - unsigned char res62[0xc]; + unsigned char res75[0xc]; unsigned int div2_ratio0; unsigned int div2_ratio1; - unsigned char res63[0x8]; + unsigned char res76[0x8]; unsigned int div4_ratio; - unsigned char res64[0x6c]; + unsigned char res77[0x6c]; unsigned int div_stat_top0; unsigned int div_stat_top1; - unsigned char res65[0x8]; + unsigned char res78[0x8]; unsigned int div_stat_gscl; - unsigned int div_stat_disp0_0; - unsigned int div_stat_disp0_1; + unsigned char res79[0x8]; unsigned int div_stat_disp1_0; - unsigned int div_stat_disp1_1; - unsigned char res67[0x8]; + unsigned char res80[0xc]; unsigned int div_stat_gen; - unsigned char res68[0x4]; - unsigned int div_stat_maudio; + unsigned char res81[0x4]; + unsigned int div_stat_mau; unsigned int div_stat_fsys0; unsigned int div_stat_fsys1; unsigned int div_stat_fsys2; - unsigned int div_stat_fsys3; + unsigned char res82[0x4]; unsigned int div_stat_peric0; unsigned int div_stat_peric1; unsigned int div_stat_peric2; unsigned int div_stat_peric3; unsigned int div_stat_peric4; unsigned int div_stat_peric5; - unsigned char res69[0x10]; + unsigned char res83[0x10]; unsigned int sclk_div_stat_isp; - unsigned char res70[0xc]; + unsigned char res84[0xc]; unsigned int div2_stat0; unsigned int div2_stat1; - unsigned char res71[0x8]; + unsigned char res85[0x8]; unsigned int div4_stat; - unsigned char res72[0x180]; - unsigned int gate_top_sclk_disp0; + unsigned char res86[0x184]; unsigned int gate_top_sclk_disp1; unsigned int gate_top_sclk_gen; - unsigned char res74[0xc]; + unsigned char res87[0xc]; unsigned int gate_top_sclk_mau; unsigned int gate_top_sclk_fsys; - unsigned char res75[0xc]; + unsigned char res88[0xc]; unsigned int gate_top_sclk_peric; - unsigned char res76[0x1c]; + unsigned char res89[0x1c]; unsigned int gate_top_sclk_isp; - unsigned char res77[0xac]; + unsigned char res90[0xac]; unsigned int gate_ip_gscl; - unsigned int gate_ip_disp0; + unsigned char res91[0x4]; unsigned int gate_ip_disp1; unsigned int gate_ip_mfc; unsigned int gate_ip_g3d; unsigned int gate_ip_gen; - unsigned char res79[0xc]; + unsigned char res92[0xc]; unsigned int gate_ip_fsys; - unsigned char res80[0x4]; - unsigned int gate_ip_gps; + unsigned char res93[0x8]; unsigned int gate_ip_peric; - unsigned char res81[0xc]; + unsigned char res94[0xc]; unsigned int gate_ip_peris; - unsigned char res82[0x1c]; + unsigned char res95[0x1c]; unsigned int gate_block; - unsigned char res83[0x7c]; + unsigned char res96[0x1c]; + unsigned int mcuiop_pwr_ctrl; + unsigned char res97[0x5c]; unsigned int clkout_cmu_top; unsigned int clkout_cmu_top_div_stat; - unsigned char res84[0x37f8]; + unsigned char res98[0x37f8]; unsigned int src_lex; - unsigned char res85[0x2fc]; + unsigned char res99[0x1fc]; + unsigned int mux_stat_lex; + unsigned char res100[0xfc]; unsigned int div_lex; - unsigned char res86[0xfc]; + unsigned char res101[0xfc]; unsigned int div_stat_lex; - unsigned char res87[0x1fc]; + unsigned char res102[0x1fc]; unsigned int gate_ip_lex; - unsigned char res88[0x1fc]; + unsigned char res103[0x1fc]; unsigned int clkout_cmu_lex; unsigned int clkout_cmu_lex_div_stat; - unsigned char res89[0x3af8]; + unsigned char res104[0x3af8]; unsigned int div_r0x; - unsigned char res90[0xfc]; + unsigned char res105[0xfc]; unsigned int div_stat_r0x; - unsigned char res91[0x1fc]; + unsigned char res106[0x1fc]; unsigned int gate_ip_r0x; - unsigned char res92[0x1fc]; + unsigned char res107[0x1fc]; unsigned int clkout_cmu_r0x; unsigned int clkout_cmu_r0x_div_stat; - unsigned char res94[0x3af8]; + unsigned char res108[0x3af8]; unsigned int div_r1x; - unsigned char res95[0xfc]; + unsigned char res109[0xfc]; unsigned int div_stat_r1x; - unsigned char res96[0x1fc]; + unsigned char res110[0x1fc]; unsigned int gate_ip_r1x; - unsigned char res97[0x1fc]; + unsigned char res111[0x1fc]; unsigned int clkout_cmu_r1x; unsigned int clkout_cmu_r1x_div_stat; - unsigned char res98[0x3608]; + unsigned char res112[0x3608]; unsigned int bpll_lock; - unsigned char res99[0xfc]; + unsigned char res113[0xfc]; unsigned int bpll_con0; unsigned int bpll_con1; - unsigned char res100[0xe8]; + unsigned char res114[0xe8]; unsigned int src_cdrex; - unsigned char res101[0x1fc]; + unsigned char res115[0x1fc]; unsigned int mux_stat_cdrex; - unsigned char res102[0xfc]; + unsigned char res116[0xfc]; unsigned int div_cdrex; - unsigned int div_cdrex2; - unsigned char res103[0xf8]; + unsigned char res117[0xfc]; unsigned int div_stat_cdrex; - unsigned char res104[0x2fc]; + unsigned char res118[0x2fc]; unsigned int gate_ip_cdrex; - unsigned char res105[0xc]; - unsigned int c2c_monitor; - unsigned int dmc_pwr_ctrl; - unsigned char res106[0x4]; + unsigned char res119[0x10]; + unsigned int dmc_freq_ctrl; + unsigned char res120[0x4]; unsigned int drex2_pause; - unsigned char res107[0xe0]; + unsigned char res121[0xe0]; unsigned int clkout_cmu_cdrex; unsigned int clkout_cmu_cdrex_div_stat; - unsigned char res108[0x8]; + unsigned char res122[0x8]; unsigned int lpddr3phy_ctrl; - unsigned char res109[0xf5f8]; + unsigned int lpddr3phy_con0; + unsigned int lpddr3phy_con1; + unsigned int lpddr3phy_con2; + unsigned int lpddr3phy_con3; + unsigned int pll_div2_sel; + unsigned char res123[0xf5d8]; }; #endif +#define MPLL_FOUT_SEL_SHIFT 4 +#define MPLL_FOUT_SEL_MASK 0x1 +#define BPLL_FOUT_SEL_SHIFT 0 +#define BPLL_FOUT_SEL_MASK 0x1 #endif diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 0e6ea87079..2cd4ae1526 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -56,6 +56,7 @@ #define EXYNOS4_USBPHY_CONTROL 0x10020704 #define EXYNOS4_GPIO_PART4_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 */ #define EXYNOS5_I2C_SPACING 0x10000 @@ -83,6 +84,7 @@ #define EXYNOS5_PWMTIMER_BASE 0x12DD0000 #define EXYNOS5_GPIO_PART2_BASE 0x13400000 #define EXYNOS5_FIMD_BASE 0x14400000 +#define EXYNOS5_DP_BASE 0x145B0000 #define EXYNOS5_ADC_BASE DEVICE_NOT_AVAILABLE #define EXYNOS5_MODEM_BASE DEVICE_NOT_AVAILABLE @@ -150,6 +152,7 @@ static inline unsigned int samsung_get_base_##device(void) \ SAMSUNG_BASE(adc, ADC_BASE) SAMSUNG_BASE(clock, CLOCK_BASE) +SAMSUNG_BASE(dp, DP_BASE) SAMSUNG_BASE(sysreg, SYSREG_BASE) SAMSUNG_BASE(fimd, FIMD_BASE) SAMSUNG_BASE(i2c, I2C_BASE) diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h index bd52d16c9d..f65c676cc5 100644 --- a/arch/arm/include/asm/arch-exynos/dmc.h +++ b/arch/arm/include/asm/arch-exynos/dmc.h @@ -251,5 +251,70 @@ struct exynos5_phy_control { unsigned int phy_con41; unsigned int phy_con42; }; + +enum ddr_mode { + DDR_MODE_DDR2, + DDR_MODE_DDR3, + DDR_MODE_LPDDR2, + DDR_MODE_LPDDR3, + + DDR_MODE_COUNT, +}; + +enum mem_manuf { + MEM_MANUF_AUTODETECT, + MEM_MANUF_ELPIDA, + MEM_MANUF_SAMSUNG, + + MEM_MANUF_COUNT, +}; + +/* CONCONTROL register fields */ +#define CONCONTROL_DFI_INIT_START_SHIFT 28 +#define CONCONTROL_RD_FETCH_SHIFT 12 +#define CONCONTROL_RD_FETCH_MASK (0x7 << CONCONTROL_RD_FETCH_SHIFT) +#define CONCONTROL_AREF_EN_SHIFT 5 + +/* PRECHCONFIG register field */ +#define PRECHCONFIG_TP_CNT_SHIFT 24 + +/* PWRDNCONFIG register field */ +#define PWRDNCONFIG_DPWRDN_CYC_SHIFT 0 +#define PWRDNCONFIG_DSREF_CYC_SHIFT 16 + +/* PHY_CON0 register fields */ +#define PHY_CON0_T_WRRDCMD_SHIFT 17 +#define PHY_CON0_T_WRRDCMD_MASK (0x7 << PHY_CON0_T_WRRDCMD_SHIFT) +#define PHY_CON0_CTRL_DDR_MODE_SHIFT 11 + +/* PHY_CON1 register fields */ +#define PHY_CON1_RDLVL_RDDATA_ADJ_SHIFT 0 + +/* PHY_CON12 register fields */ +#define PHY_CON12_CTRL_START_POINT_SHIFT 24 +#define PHY_CON12_CTRL_INC_SHIFT 16 +#define PHY_CON12_CTRL_FORCE_SHIFT 8 +#define PHY_CON12_CTRL_START_SHIFT 6 +#define PHY_CON12_CTRL_START_MASK (1 << PHY_CON12_CTRL_START_SHIFT) +#define PHY_CON12_CTRL_DLL_ON_SHIFT 5 +#define PHY_CON12_CTRL_DLL_ON_MASK (1 << PHY_CON12_CTRL_DLL_ON_SHIFT) +#define PHY_CON12_CTRL_REF_SHIFT 1 + +/* PHY_CON16 register fields */ +#define PHY_CON16_ZQ_MODE_DDS_SHIFT 24 +#define PHY_CON16_ZQ_MODE_DDS_MASK (0x7 << PHY_CON16_ZQ_MODE_DDS_SHIFT) + +#define PHY_CON16_ZQ_MODE_TERM_SHIFT 21 +#define PHY_CON16_ZQ_MODE_TERM_MASK (0x7 << PHY_CON16_ZQ_MODE_TERM_SHIFT) + +#define PHY_CON16_ZQ_MODE_NOTERM_MASK (1 << 19) + +/* PHY_CON42 register fields */ +#define PHY_CON42_CTRL_BSTLEN_SHIFT 8 +#define PHY_CON42_CTRL_BSTLEN_MASK (0xff << PHY_CON42_CTRL_BSTLEN_SHIFT) + +#define PHY_CON42_CTRL_RDLAT_SHIFT 0 +#define PHY_CON42_CTRL_RDLAT_MASK (0x1f << PHY_CON42_CTRL_RDLAT_SHIFT) + #endif #endif diff --git a/arch/arm/include/asm/arch-exynos/dp.h b/arch/arm/include/asm/arch-exynos/dp.h new file mode 100644 index 0000000000..69c65f7a76 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/dp.h @@ -0,0 +1,751 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_ARCH_DP_H_ +#define __ASM_ARM_ARCH_DP_H_ + +#ifndef __ASSEMBLY__ + +struct exynos_dp { + unsigned char res1[0x10]; + unsigned int tx_version; + unsigned int tx_sw_reset; + unsigned int func_en1; + unsigned int func_en2; + unsigned int video_ctl1; + unsigned int video_ctl2; + unsigned int video_ctl3; + unsigned int video_ctl4; + unsigned int color_blue_cb; + unsigned int color_green_y; + unsigned int color_red_cr; + unsigned int video_ctl8; + unsigned char res2[0x4]; + unsigned int video_ctl10; + unsigned int total_ln_cfg_l; + unsigned int total_ln_cfg_h; + unsigned int active_ln_cfg_l; + unsigned int active_ln_cfg_h; + unsigned int vfp_cfg; + unsigned int vsw_cfg; + unsigned int vbp_cfg; + unsigned int total_pix_cfg_l; + unsigned int total_pix_cfg_h; + unsigned int active_pix_cfg_l; + unsigned int active_pix_cfg_h; + unsigned int hfp_cfg_l; + unsigned int hfp_cfg_h; + unsigned int hsw_cfg_l; + unsigned int hsw_cfg_h; + unsigned int hbp_cfg_l; + unsigned int hbp_cfg_h; + unsigned int video_status; + unsigned int total_ln_sta_l; + unsigned int total_ln_sta_h; + unsigned int active_ln_sta_l; + unsigned int active_ln_sta_h; + + unsigned int vfp_sta; + unsigned int vsw_sta; + unsigned int vbp_sta; + + unsigned int total_pix_sta_l; + unsigned int total_pix_sta_h; + unsigned int active_pix_sta_l; + unsigned int active_pix_sta_h; + + unsigned int hfp_sta_l; + unsigned int hfp_sta_h; + unsigned int hsw_sta_l; + unsigned int hsw_sta_h; + unsigned int hbp_sta_l; + unsigned int hbp_sta_h; + + unsigned char res3[0x288]; + + unsigned int lane_map; + unsigned char res4[0x10]; + unsigned int analog_ctl1; + unsigned int analog_ctl2; + unsigned int analog_ctl3; + + unsigned int pll_filter_ctl1; + unsigned int amp_tuning_ctl; + unsigned char res5[0xc]; + + unsigned int aux_hw_retry_ctl; + unsigned char res6[0x2c]; + unsigned int int_state; + unsigned int common_int_sta1; + unsigned int common_int_sta2; + unsigned int common_int_sta3; + unsigned int common_int_sta4; + unsigned char res7[0x8]; + + unsigned int int_sta; + unsigned char res8[0x1c]; + unsigned int int_ctl; + unsigned char res9[0x200]; + unsigned int sys_ctl1; + unsigned int sys_ctl2; + unsigned int sys_ctl3; + unsigned int sys_ctl4; + unsigned int vid_ctl; + unsigned char res10[0x2c]; + unsigned int pkt_send_ctl; + unsigned char res[0x4]; + unsigned int hdcp_ctl; + unsigned char res11[0x34]; + unsigned int link_bw_set; + + unsigned int lane_count_set; + unsigned int training_ptn_set; + unsigned int ln0_link_training_ctl; + unsigned int ln1_link_training_ctl; + unsigned int ln2_link_training_ctl; + unsigned int ln3_link_training_ctl; + unsigned int dn_spread_ctl; + unsigned int hw_link_training_ctl; + unsigned char res12[0x1c]; + + unsigned int debug_ctl; + unsigned int hpd_deglitch_l; + unsigned int hpd_deglitch_h; + + unsigned char res13[0x14]; + unsigned int link_debug_ctl; + + unsigned char res14[0x1c]; + + unsigned int m_vid0; + unsigned int m_vid1; + unsigned int m_vid2; + unsigned int n_vid0; + unsigned int n_vid1; + unsigned int n_vid2; + unsigned int m_vid_mon; + unsigned int pll_ctl; + unsigned int phy_pd; + unsigned int phy_test; + unsigned char res15[0x8]; + + unsigned int video_fifo_thrd; + unsigned char res16[0x8]; + unsigned int audio_margin; + + unsigned int dn_spread_ctl1; + unsigned int dn_spread_ctl2; + unsigned char res17[0x18]; + unsigned int m_cal_ctl; + unsigned int m_vid_gen_filter_th; + unsigned char res18[0x10]; + unsigned int m_aud_gen_filter_th; + unsigned char res50[0x4]; + + unsigned int aux_ch_sta; + unsigned int aux_err_num; + unsigned int aux_ch_defer_ctl; + unsigned int aux_rx_comm; + unsigned int buffer_data_ctl; + + unsigned int aux_ch_ctl1; + unsigned int aux_addr_7_0; + unsigned int aux_addr_15_8; + unsigned int aux_addr_19_16; + unsigned int aux_ch_ctl2; + unsigned char res19[0x18]; + unsigned int buf_data0; + unsigned char res20[0x3c]; + + unsigned int soc_general_ctl; + unsigned char res21[0x8c]; + unsigned int crc_con; + unsigned int crc_result; + unsigned char res22[0x8]; + + unsigned int common_int_mask1; + unsigned int common_int_mask2; + unsigned int common_int_mask3; + unsigned int common_int_mask4; + unsigned int int_sta_mask1; + unsigned int int_sta_mask2; + unsigned int int_sta_mask3; + unsigned int int_sta_mask4; + unsigned int int_sta_mask; + unsigned int crc_result2; + unsigned int scrambler_reset_cnt; + + unsigned int pn_inv; + unsigned int psr_config; + unsigned int psr_command0; + unsigned int psr_command1; + unsigned int psr_crc_mon0; + unsigned int psr_crc_mon1; + + unsigned char res24[0x30]; + unsigned int phy_bist_ctrl; + unsigned char res25[0xc]; + unsigned int phy_ctrl; + unsigned char res26[0x1c]; + unsigned int test_pattern_gen_en; + unsigned int test_pattern_gen_ctrl; +}; + +#endif /* __ASSEMBLY__ */ + +/* For DP VIDEO CTL 1 */ +#define VIDEO_EN_MASK (0x01 << 7) +#define VIDEO_MUTE_MASK (0x01 << 6) + +/* For DP VIDEO CTL 4 */ +#define VIDEO_BIST_MASK (0x1 << 3) + +/* EXYNOS_DP_ANALOG_CTL_1 */ +#define SEL_BG_NEW_BANDGAP (0x0 << 6) +#define SEL_BG_INTERNAL_RESISTOR (0x1 << 6) +#define TX_TERMINAL_CTRL_73_OHM (0x0 << 4) +#define TX_TERMINAL_CTRL_61_OHM (0x1 << 4) +#define TX_TERMINAL_CTRL_50_OHM (0x2 << 4) +#define TX_TERMINAL_CTRL_45_OHM (0x3 << 4) +#define SWING_A_30PER_G_INCREASE (0x1 << 3) +#define SWING_A_30PER_G_NORMAL (0x0 << 3) + +/* EXYNOS_DP_ANALOG_CTL_2 */ +#define CPREG_BLEED (0x1 << 4) +#define SEL_24M (0x1 << 3) +#define TX_DVDD_BIT_1_0000V (0x3 << 0) +#define TX_DVDD_BIT_1_0625V (0x4 << 0) +#define TX_DVDD_BIT_1_1250V (0x5 << 0) + +/* EXYNOS_DP_ANALOG_CTL_3 */ +#define DRIVE_DVDD_BIT_1_0000V (0x3 << 5) +#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5) +#define DRIVE_DVDD_BIT_1_1250V (0x5 << 5) +#define SEL_CURRENT_DEFAULT (0x0 << 3) +#define VCO_BIT_000_MICRO (0x0 << 0) +#define VCO_BIT_200_MICRO (0x1 << 0) +#define VCO_BIT_300_MICRO (0x2 << 0) +#define VCO_BIT_400_MICRO (0x3 << 0) +#define VCO_BIT_500_MICRO (0x4 << 0) +#define VCO_BIT_600_MICRO (0x5 << 0) +#define VCO_BIT_700_MICRO (0x6 << 0) +#define VCO_BIT_900_MICRO (0x7 << 0) + +/* EXYNOS_DP_PLL_FILTER_CTL_1 */ +#define PD_RING_OSC (0x1 << 6) +#define AUX_TERMINAL_CTRL_52_OHM (0x3 << 4) +#define AUX_TERMINAL_CTRL_69_OHM (0x2 << 4) +#define AUX_TERMINAL_CTRL_102_OHM (0x1 << 4) +#define AUX_TERMINAL_CTRL_200_OHM (0x0 << 4) +#define TX_CUR1_1X (0x0 << 2) +#define TX_CUR1_2X (0x1 << 2) +#define TX_CUR1_3X (0x2 << 2) +#define TX_CUR_1_MA (0x0 << 0) +#define TX_CUR_2_MA (0x1 << 0) +#define TX_CUR_3_MA (0x2 << 0) +#define TX_CUR_4_MA (0x3 << 0) + +/* EXYNOS_DP_PLL_FILTER_CTL_2 */ +#define CH3_AMP_0_MV (0x3 << 12) +#define CH2_AMP_0_MV (0x3 << 8) +#define CH1_AMP_0_MV (0x3 << 4) +#define CH0_AMP_0_MV (0x3 << 0) + +/* EXYNOS_DP_PLL_CTL */ +#define DP_PLL_PD (0x1 << 7) +#define DP_PLL_RESET (0x1 << 6) +#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4) +#define DP_PLL_REF_BIT_1_1250V (0x5 << 0) +#define DP_PLL_REF_BIT_1_2500V (0x7 << 0) + +/* EXYNOS_DP_INT_CTL */ +#define SOFT_INT_CTRL (0x1 << 2) +#define INT_POL (0x1 << 0) + +/* DP TX SW RESET */ +#define RESET_DP_TX (0x01 << 0) + +/* DP FUNC_EN_1 */ +#define MASTER_VID_FUNC_EN_N (0x1 << 7) +#define SLAVE_VID_FUNC_EN_N (0x1 << 5) +#define AUD_FIFO_FUNC_EN_N (0x1 << 4) +#define AUD_FUNC_EN_N (0x1 << 3) +#define HDCP_FUNC_EN_N (0x1 << 2) +#define CRC_FUNC_EN_N (0x1 << 1) +#define SW_FUNC_EN_N (0x1 << 0) + +/* DP FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) + +/* EXYNOS_DP_PHY_PD */ +#define PHY_PD (0x1 << 5) +#define AUX_PD (0x1 << 4) +#define CH3_PD (0x1 << 3) +#define CH2_PD (0x1 << 2) +#define CH1_PD (0x1 << 1) +#define CH0_PD (0x1 << 0) + +/* EXYNOS_DP_COMMON_INT_STA_1 */ +#define VSYNC_DET (0x1 << 7) +#define PLL_LOCK_CHG (0x1 << 6) +#define SPDIF_ERR (0x1 << 5) +#define SPDIF_UNSTBL (0x1 << 4) +#define VID_FORMAT_CHG (0x1 << 3) +#define AUD_CLK_CHG (0x1 << 2) +#define VID_CLK_CHG (0x1 << 1) +#define SW_INT (0x1 << 0) + +/* EXYNOS_DP_DEBUG_CTL */ +#define PLL_LOCK (0x1 << 4) +#define F_PLL_LOCK (0x1 << 3) +#define PLL_LOCK_CTRL (0x1 << 2) + +/* EXYNOS_DP_FUNC_EN_2 */ +#define SSC_FUNC_EN_N (0x1 << 7) +#define AUX_FUNC_EN_N (0x1 << 2) +#define SERDES_FIFO_FUNC_EN_N (0x1 << 1) +#define LS_CLK_DOMAIN_FUNC_EN_N (0x1 << 0) + +/* EXYNOS_DP_COMMON_INT_STA_4 */ +#define PSR_ACTIVE (0x1 << 7) +#define PSR_INACTIVE (0x1 << 6) +#define SPDIF_BI_PHASE_ERR (0x1 << 5) +#define HOTPLUG_CHG (0x1 << 2) +#define HPD_LOST (0x1 << 1) +#define PLUG (0x1 << 0) + +/* EXYNOS_DP_INT_STA */ +#define INT_HPD (0x1 << 6) +#define HW_TRAINING_FINISH (0x1 << 5) +#define RPLY_RECEIV (0x1 << 1) +#define AUX_ERR (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0) + +/* EXYNOS_DP_AUX_HW_RETRY_CTL */ +#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8) +#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3) +#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3) +#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3) +#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3) +#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3) +#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0) + +/* EXYNOS_DP_AUX_CH_DEFER_CTL */ +#define DEFER_CTRL_EN (0x1 << 7) +#define DEFER_COUNT(x) (((x) & 0x7f) << 0) + +#define COMMON_INT_MASK_1 (0) +#define COMMON_INT_MASK_2 (0) +#define COMMON_INT_MASK_3 (0) +#define COMMON_INT_MASK_4 (0) +#define INT_STA_MASK (0) + +/* EXYNOS_DP_BUFFER_DATA_CTL */ +#define BUF_CLR (0x1 << 7) +#define BUF_DATA_COUNT(x) (((x) & 0x1f) << 0) + +/* EXYNOS_DP_AUX_ADDR_7_0 */ +#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff) + +/* EXYNOS_DP_AUX_ADDR_15_8 */ +#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff) + +/* EXYNOS_DP_AUX_ADDR_19_16 */ +#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f) + +/* EXYNOS_DP_AUX_CH_CTL_1 */ +#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4) +#define AUX_TX_COMM_MASK (0xf << 0) +#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3) +#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3) +#define AUX_TX_COMM_MOT (0x1 << 2) +#define AUX_TX_COMM_WRITE (0x0 << 0) +#define AUX_TX_COMM_READ (0x1 << 0) + +/* EXYNOS_DP_AUX_CH_CTL_2 */ +#define ADDR_ONLY (0x1 << 1) +#define AUX_EN (0x1 << 0) + +/* EXYNOS_DP_AUX_CH_STA */ +#define AUX_BUSY (0x1 << 4) +#define AUX_STATUS_MASK (0xf << 0) + +/* EXYNOS_DP_AUX_RX_COMM */ +#define AUX_RX_COMM_I2C_DEFER (0x2 << 2) +#define AUX_RX_COMM_AUX_DEFER (0x2 << 0) + +/* EXYNOS_DP_PHY_TEST */ +#define MACRO_RST (0x1 << 5) +#define CH1_TEST (0x1 << 1) +#define CH0_TEST (0x1 << 0) + +/* EXYNOS_DP_TRAINING_PTN_SET */ +#define SCRAMBLER_TYPE (0x1 << 9) +#define HW_LINK_TRAINING_PATTERN (0x1 << 8) +#define SCRAMBLING_DISABLE (0x1 << 5) +#define SCRAMBLING_ENABLE (0x0 << 5) +#define LINK_QUAL_PATTERN_SET_MASK (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2) +#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2) +#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0) +#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0) +#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0) +#define SW_TRAINING_PATTERN_SET_NORMAL (0x0 << 0) + +/* EXYNOS_DP_TOTAL_LINE_CFG */ +#define TOTAL_LINE_CFG_L(x) ((x) & 0xff) +#define TOTAL_LINE_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_LINE_CFG_L(x) ((x) & 0xff) +#define ACTIVE_LINE_CFG_H(x) (((x) >> 8) & 0xff) +#define TOTAL_PIXEL_CFG_L(x) ((x) & 0xff) +#define TOTAL_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) +#define ACTIVE_PIXEL_CFG_L(x) ((x) & 0xff) +#define ACTIVE_PIXEL_CFG_H(x) ((((x) >> 8)) & 0xff) + +#define H_F_PORCH_CFG_L(x) ((x) & 0xff) +#define H_F_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_SYNC_PORCH_CFG_L(x) ((x) & 0xff) +#define H_SYNC_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) +#define H_B_PORCH_CFG_L(x) ((x) & 0xff) +#define H_B_PORCH_CFG_H(x) ((((x) >> 8)) & 0xff) + +/* EXYNOS_DP_LN0_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_0 (0x1 << 5) +#define PRE_EMPHASIS_SET_0_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_0_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_0_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_0_SHIFT (3) +#define PRE_EMPHASIS_SET_0_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_0_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_0 (0x1 << 2) +#define DRIVE_CURRENT_SET_0_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_0_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_0_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_0_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_0_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN1_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_1 (0x1 << 5) +#define PRE_EMPHASIS_SET_1_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_1_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_1_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_1_SHIFT (3) +#define PRE_EMPHASIS_SET_1_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_1_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_1 (0x1 << 2) +#define DRIVE_CURRENT_SET_1_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_1_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_1_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_1_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_1_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN2_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_2 (0x1 << 5) +#define PRE_EMPHASIS_SET_2_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_2_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_2_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_2_SHIFT (3) +#define PRE_EMPHASIS_SET_2_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_2_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_2 (0x1 << 2) +#define DRIVE_CURRENT_SET_2_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_2_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_2_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_2_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_2_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_LN3_LINK_TRAINING_CTL */ +#define MAX_PRE_EMPHASIS_REACH_3 (0x1 << 5) +#define PRE_EMPHASIS_SET_3_SET(x) (((x) & 0x3) << 3) +#define PRE_EMPHASIS_SET_3_GET(x) (((x) >> 3) & 0x3) +#define PRE_EMPHASIS_SET_3_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_3_SHIFT (3) +#define PRE_EMPHASIS_SET_3_LEVEL_3 (0x3 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_2 (0x2 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_1 (0x1 << 3) +#define PRE_EMPHASIS_SET_3_LEVEL_0 (0x0 << 3) +#define MAX_DRIVE_CURRENT_REACH_3 (0x1 << 2) +#define DRIVE_CURRENT_SET_3_MASK (0x3 << 0) +#define DRIVE_CURRENT_SET_3_SET(x) (((x) & 0x3) << 0) +#define DRIVE_CURRENT_SET_3_GET(x) (((x) >> 0) & 0x3) +#define DRIVE_CURRENT_SET_3_LEVEL_3 (0x3 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_2 (0x2 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_1 (0x1 << 0) +#define DRIVE_CURRENT_SET_3_LEVEL_0 (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_10 */ +#define FORMAT_SEL (0x1 << 4) +#define INTERACE_SCAN_CFG (0x1 << 2) +#define INTERACE_SCAN_CFG_SHIFT (2) +#define VSYNC_POLARITY_CFG (0x1 << 1) +#define V_S_POLARITY_CFG_SHIFT (1) +#define HSYNC_POLARITY_CFG (0x1 << 0) +#define H_S_POLARITY_CFG_SHIFT (0) + +/* EXYNOS_DP_SOC_GENERAL_CTL */ +#define AUDIO_MODE_SPDIF_MODE (0x1 << 8) +#define AUDIO_MODE_MASTER_MODE (0x0 << 8) +#define MASTER_VIDEO_INTERLACE_EN (0x1 << 4) +#define VIDEO_MASTER_CLK_SEL (0x1 << 2) +#define VIDEO_MASTER_MODE_EN (0x1 << 1) +#define VIDEO_MODE_MASK (0x1 << 0) +#define VIDEO_MODE_SLAVE_MODE (0x1 << 0) +#define VIDEO_MODE_MASTER_MODE (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_1 */ +#define VIDEO_EN (0x1 << 7) +#define HDCP_VIDEO_MUTE (0x1 << 6) + +/* EXYNOS_DP_VIDEO_CTL_2 */ +#define IN_D_RANGE_MASK (0x1 << 7) +#define IN_D_RANGE_SHIFT (7) +#define IN_D_RANGE_CEA (0x1 << 7) +#define IN_D_RANGE_VESA (0x0 << 7) +#define IN_BPC_MASK (0x7 << 4) +#define IN_BPC_SHIFT (4) +#define IN_BPC_12_BITS (0x3 << 4) +#define IN_BPC_10_BITS (0x2 << 4) +#define IN_BPC_8_BITS (0x1 << 4) +#define IN_BPC_6_BITS (0x0 << 4) +#define IN_COLOR_F_MASK (0x3 << 0) +#define IN_COLOR_F_SHIFT (0) +#define IN_COLOR_F_YCBCR444 (0x2 << 0) +#define IN_COLOR_F_YCBCR422 (0x1 << 0) +#define IN_COLOR_F_RGB (0x0 << 0) + +/* EXYNOS_DP_VIDEO_CTL_3 */ +#define IN_YC_COEFFI_MASK (0x1 << 7) +#define IN_YC_COEFFI_SHIFT (7) +#define IN_YC_COEFFI_ITU709 (0x1 << 7) +#define IN_YC_COEFFI_ITU601 (0x0 << 7) +#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_SHIFT (4) +#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4) + +/* EXYNOS_DP_TEST_PATTERN_GEN_EN */ +#define TEST_PATTERN_GEN_EN (0x1 << 0) +#define TEST_PATTERN_GEN_DIS (0x0 << 0) + +/* EXYNOS_DP_TEST_PATTERN_GEN_CTRL */ +#define TEST_PATTERN_MODE_COLOR_SQUARE (0x3 << 0) +#define TEST_PATTERN_MODE_BALCK_WHITE_V_LINES (0x2 << 0) +#define TEST_PATTERN_MODE_COLOR_RAMP (0x1 << 0) + +/* EXYNOS_DP_VIDEO_CTL_4 */ +#define BIST_EN (0x1 << 3) +#define BIST_WIDTH_MASK (0x1 << 2) +#define BIST_WIDTH_BAR_32_PIXEL (0x0 << 2) +#define BIST_WIDTH_BAR_64_PIXEL (0x1 << 2) +#define BIST_TYPE_MASK (0x3 << 0) +#define BIST_TYPE_COLOR_BAR (0x0 << 0) +#define BIST_TYPE_WHITE_GRAY_BLACK_BAR (0x1 << 0) +#define BIST_TYPE_MOBILE_WHITE_BAR (0x2 << 0) + +/* EXYNOS_DP_SYS_CTL_1 */ +#define DET_STA (0x1 << 2) +#define FORCE_DET (0x1 << 1) +#define DET_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_2 */ +#define CHA_CRI(x) (((x) & 0xf) << 4) +#define CHA_STA (0x1 << 2) +#define FORCE_CHA (0x1 << 1) +#define CHA_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_3 */ +#define HPD_STATUS (0x1 << 6) +#define F_HPD (0x1 << 5) +#define HPD_CTRL (0x1 << 4) +#define HDCP_RDY (0x1 << 3) +#define STRM_VALID (0x1 << 2) +#define F_VALID (0x1 << 1) +#define VALID_CTRL (0x1 << 0) + +/* EXYNOS_DP_SYS_CTL_4 */ +#define FIX_M_AUD (0x1 << 4) +#define ENHANCED (0x1 << 3) +#define FIX_M_VID (0x1 << 2) +#define M_VID_UPDATE_CTRL (0x3 << 0) + +/* EXYNOS_M_VID_X */ +#define M_VID0_CFG(x) ((x) & 0xff) +#define M_VID1_CFG(x) (((x) >> 8) & 0xff) +#define M_VID2_CFG(x) (((x) >> 16) & 0xff) + +/* EXYNOS_M_VID_X */ +#define N_VID0_CFG(x) ((x) & 0xff) +#define N_VID1_CFG(x) (((x) >> 8) & 0xff) +#define N_VID2_CFG(x) (((x) >> 16) & 0xff) + +/* DPCD_TRAINING_PATTERN_SET */ +#define DPCD_SCRAMBLING_DISABLED (0x1 << 5) +#define DPCD_SCRAMBLING_ENABLED (0x0 << 5) +#define DPCD_TRAINING_PATTERN_2 (0x2 << 0) +#define DPCD_TRAINING_PATTERN_1 (0x1 << 0) +#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0) + +/* Definition for DPCD Register */ +#define DPCD_DPCD_REV (0x0000) +#define DPCD_MAX_LINK_RATE (0x0001) +#define DPCD_MAX_LANE_COUNT (0x0002) +#define DPCD_LINK_BW_SET (0x0100) +#define DPCD_LANE_COUNT_SET (0x0101) +#define DPCD_TRAINING_PATTERN_SET (0x0102) +#define DPCD_TRAINING_LANE0_SET (0x0103) +#define DPCD_LANE0_1_STATUS (0x0202) +#define DPCD_LN_ALIGN_UPDATED (0x0204) +#define DPCD_ADJUST_REQUEST_LANE0_1 (0x0206) +#define DPCD_ADJUST_REQUEST_LANE2_3 (0x0207) +#define DPCD_TEST_REQUEST (0x0218) +#define DPCD_TEST_RESPONSE (0x0260) +#define DPCD_TEST_EDID_CHECKSUM (0x0261) +#define DPCD_SINK_POWER_STATE (0x0600) + +/* DPCD_TEST_REQUEST */ +#define DPCD_TEST_EDID_READ (0x1 << 2) + +/* DPCD_TEST_RESPONSE */ +#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2) + +/* DPCD_SINK_POWER_STATE */ +#define DPCD_SET_POWER_STATE_D0 (0x1 << 0) +#define DPCD_SET_POWER_STATE_D4 (0x2 << 0) + +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR (0x50) +#define I2C_E_EDID_DEVICE_ADDR (0x30) +#define EDID_BLOCK_LENGTH (0x80) +#define EDID_HEADER_PATTERN (0x00) +#define EDID_EXTENSION_FLAG (0x7e) +#define EDID_CHECKSUM (0x7f) + +/* DPCD_LANE0_1_STATUS */ +#define DPCD_LANE1_SYMBOL_LOCKED (0x1 << 6) +#define DPCD_LANE1_CHANNEL_EQ_DONE (0x1 << 5) +#define DPCD_LANE1_CR_DONE (0x1 << 4) +#define DPCD_LANE0_SYMBOL_LOCKED (0x1 << 2) +#define DPCD_LANE0_CHANNEL_EQ_DONE (0x1 << 1) +#define DPCD_LANE0_CR_DONE (0x1 << 0) + +/* DPCD_ADJUST_REQUEST_LANE0_1 */ +#define DPCD_PRE_EMPHASIS_LANE1_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE1_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE1_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE1_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE0_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE0_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE0_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE0_LEVEL_0 (0x0 << 0) + +/* DPCD_ADJUST_REQUEST_LANE2_3 */ +#define DPCD_PRE_EMPHASIS_LANE2_MASK (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2(x) (((x) >> 6) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_3 (0x3 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_2 (0x2 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_1 (0x1 << 6) +#define DPCD_PRE_EMPHASIS_LANE2_LEVEL_0 (0x0 << 6) +#define DPCD_VOLTAGE_SWING_LANE2_MASK (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2(x) (((x) >> 4) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_3 (0x3 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_2 (0x2 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_1 (0x1 << 4) +#define DPCD_VOLTAGE_SWING_LANE2_LEVEL_0 (0x0 << 4) +#define DPCD_PRE_EMPHASIS_LANE3_MASK (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3(x) (((x) >> 2) & 0x3) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_3 (0x3 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_2 (0x2 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_1 (0x1 << 2) +#define DPCD_PRE_EMPHASIS_LANE3_LEVEL_0 (0x0 << 2) +#define DPCD_VOLTAGE_SWING_LANE3_MASK (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_LANE3_LEVEL_0 (0x0 << 0) + +/* DPCD_LANE_COUNT_SET */ +#define DPCD_ENHANCED_FRAME_EN (0x1 << 7) +#define DPCD_LN_COUNT_SET(x) ((x) & 0x1f) + +/* DPCD_LANE_ALIGN__STATUS_UPDATED */ +#define DPCD_LINK_STATUS_UPDATED (0x1 << 7) +#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6) +#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0) + +/* DPCD_TRAINING_LANE0_SET */ +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_3 (0x3 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_2 (0x2 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_1 (0x1 << 3) +#define DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 (0x0 << 3) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_3 (0x3 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_2 (0x2 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_1 (0x1 << 0) +#define DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0 (0x0 << 0) + +#define DPCD_REQ_ADJ_SWING (0x00) +#define DPCD_REQ_ADJ_EMPHASIS (0x01) + +#define DP_LANE_STAT_CR_DONE (0x01 << 0) +#define DP_LANE_STAT_CE_DONE (0x01 << 1) +#define DP_LANE_STAT_SYM_LOCK (0x01 << 2) + +#endif diff --git a/arch/arm/include/asm/arch-exynos/dp_info.h b/arch/arm/include/asm/arch-exynos/dp_info.h new file mode 100644 index 0000000000..35694980fa --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/dp_info.h @@ -0,0 +1,214 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _DP_INFO_H +#define _DP_INFO_H + +#define msleep(a) udelay(a * 1000) + +#define DP_TIMEOUT_LOOP_COUNT 100 +#define MAX_CR_LOOP 5 +#define MAX_EQ_LOOP 4 + +#define EXYNOS_DP_SUCCESS 0 + +enum { + DP_DISABLE, + DP_ENABLE, +}; + +struct edp_disp_info { + char *name; + unsigned int h_total; + unsigned int h_res; + unsigned int h_sync_width; + unsigned int h_back_porch; + unsigned int h_front_porch; + unsigned int v_total; + unsigned int v_res; + unsigned int v_sync_width; + unsigned int v_back_porch; + unsigned int v_front_porch; + + unsigned int v_sync_rate; +}; + +struct edp_link_train_info { + unsigned int lt_status; + + unsigned int ep_loop; + unsigned int cr_loop[4]; + +}; + +struct edp_video_info { + unsigned int master_mode; + unsigned int bist_mode; + unsigned int bist_pattern; + + unsigned int h_sync_polarity; + unsigned int v_sync_polarity; + unsigned int interlaced; + + unsigned int color_space; + unsigned int dynamic_range; + unsigned int ycbcr_coeff; + unsigned int color_depth; +}; + +struct edp_device_info { + struct edp_disp_info disp_info; + struct edp_link_train_info lt_info; + struct edp_video_info video_info; + + /*below info get from panel during training*/ + unsigned char lane_bw; + unsigned char lane_cnt; + unsigned char dpcd_rev; + /*support enhanced frame cap */ + unsigned char dpcd_efc; +}; + +enum analog_power_block { + AUX_BLOCK, + CH0_BLOCK, + CH1_BLOCK, + CH2_BLOCK, + CH3_BLOCK, + ANALOG_TOTAL, + POWER_ALL +}; + +enum pll_status { + PLL_UNLOCKED = 0, + PLL_LOCKED +}; + +enum { + COLOR_RGB, + COLOR_YCBCR422, + COLOR_YCBCR444 +}; + +enum { + VESA, + CEA +}; + +enum { + COLOR_YCBCR601, + COLOR_YCBCR709 +}; + +enum { + COLOR_6, + COLOR_8, + COLOR_10, + COLOR_12 +}; + +enum { + DP_LANE_BW_1_62 = 0x06, + DP_LANE_BW_2_70 = 0x0a, +}; + +enum { + DP_LANE_CNT_1 = 1, + DP_LANE_CNT_2 = 2, + DP_LANE_CNT_4 = 4, +}; + +enum { + DP_DPCD_REV_10 = 0x10, + DP_DPCD_REV_11 = 0x11, +}; + +enum { + DP_LT_NONE, + DP_LT_START, + DP_LT_CR, + DP_LT_ET, + DP_LT_FINISHED, + DP_LT_FAIL, +}; + +enum { + PRE_EMPHASIS_LEVEL_0, + PRE_EMPHASIS_LEVEL_1, + PRE_EMPHASIS_LEVEL_2, + PRE_EMPHASIS_LEVEL_3, +}; + +enum { + PRBS7, + D10_2, + TRAINING_PTN1, + TRAINING_PTN2, + DP_NONE +}; + +enum { + VOLTAGE_LEVEL_0, + VOLTAGE_LEVEL_1, + VOLTAGE_LEVEL_2, + VOLTAGE_LEVEL_3, +}; + +enum pattern_type { + NO_PATTERN, + COLOR_RAMP, + BALCK_WHITE_V_LINES, + COLOR_SQUARE, + INVALID_PATTERN, + COLORBAR_32, + COLORBAR_64, + WHITE_GRAY_BALCKBAR_32, + WHITE_GRAY_BALCKBAR_64, + MOBILE_WHITEBAR_32, + MOBILE_WHITEBAR_64 +}; + +enum { + CALCULATED_M, + REGISTER_M +}; + +enum { + VIDEO_TIMING_FROM_CAPTURE, + VIDEO_TIMING_FROM_REGISTER +}; + + +struct exynos_dp_platform_data { + struct edp_device_info *edp_dev_info; + void (*phy_enable)(unsigned int); +}; + +#ifdef CONFIG_EXYNOS_DP +unsigned int exynos_init_dp(void); +#else +unsigned int exynos_init_dp(void) +{ + return 0; +} +#endif + +#endif /* _DP_INFO_H */ diff --git a/arch/arm/include/asm/arch-exynos/fb.h b/arch/arm/include/asm/arch-exynos/fb.h index b10b0da07e..01445afde9 100644 --- a/arch/arm/include/asm/arch-exynos/fb.h +++ b/arch/arm/include/asm/arch-exynos/fb.h @@ -23,7 +23,7 @@ #define __ASM_ARM_ARCH_FB_H_ #ifndef __ASSEMBLY__ -struct exynos4_fb { +struct exynos_fb { unsigned int vidcon0; unsigned int vidcon1; unsigned int vidcon2; @@ -151,9 +151,23 @@ struct exynos4_fb { unsigned char res15[156]; unsigned int dualrgb; + unsigned char res16[16]; + unsigned int dp_mie_clkcon; }; #endif +/* LCD IF register offset */ +#define EXYNOS4_LCD_IF_BASE_OFFSET 0x0 +#define EXYNOS5_LCD_IF_BASE_OFFSET 0x20000 + +static inline unsigned int exynos_fimd_get_base_offset(void) +{ + if (cpu_is_exynos5()) + return EXYNOS5_LCD_IF_BASE_OFFSET; + else + return EXYNOS4_LCD_IF_BASE_OFFSET; +} + /* * Register offsets */ @@ -253,6 +267,8 @@ struct exynos4_fb { /* VIDTCON2 */ #define EXYNOS_VIDTCON2_LINEVAL(x) (((x) & 0x7ff) << 11) #define EXYNOS_VIDTCON2_HOZVAL(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDTCON2_LINEVAL_E(x) ((((x) & 0x800) >> 11) << 23) +#define EXYNOS_VIDTCON2_HOZVAL_E(x) ((((x) & 0x800) >> 11) << 22) /* Window 0~4 Control - WINCONx */ #define EXYNOS_WINCON_DATAPATH_DMA (0 << 22) @@ -330,6 +346,8 @@ struct exynos4_fb { #define EXYNOS_VIDOSD_TOP_Y(x) (((x) & 0x7ff) << 0) #define EXYNOS_VIDOSD_RIGHT_X(x) (((x) & 0x7ff) << 11) #define EXYNOS_VIDOSD_BOTTOM_Y(x) (((x) & 0x7ff) << 0) +#define EXYNOS_VIDOSD_RIGHT_X_E(x) (((x) & 0x1) << 23) +#define EXYNOS_VIDOSD_BOTTOM_Y_E(x) (((x) & 0x1) << 22) /* VIDOSD0C, VIDOSDxD */ #define EXYNOS_VIDOSD_SIZE(x) (((x) & 0xffffff) << 0) @@ -354,6 +372,8 @@ struct exynos4_fb { /* Buffer Size */ #define EXYNOS_VIDADDR_OFFSIZE(x) (((x) & 0x1fff) << 13) #define EXYNOS_VIDADDR_PAGEWIDTH(x) (((x) & 0x1fff) << 0) +#define EXYNOS_VIDADDR_OFFSIZE_E(x) ((((x) & 0x2000) >> 13) << 27) +#define EXYNOS_VIDADDR_PAGEWIDTH_E(x) ((((x) & 0x2000) >> 13) << 26) /* WIN Color Map */ #define EXYNOS_WINMAP_COLOR(x) ((x) & 0xffffff) @@ -443,4 +463,9 @@ struct exynos4_fb { #define EXYNOS_I80START_TRIG (1 << 1) #define EXYNOS_I80STATUS_TRIG_DONE (1 << 2) +/* DP_MIE_CLKCON */ +#define EXYNOS_DP_MIE_DISABLE (0 << 0) +#define EXYNOS_DP_CLK_ENABLE (1 << 1) +#define EXYNOS_MIE_CLK_ENABLE (3 << 0) + #endif /* _REGS_FB_H */ diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 7a9bb90a0c..97be4eac05 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -100,7 +100,9 @@ struct exynos5_gpio_part1 { struct s5p_gpio_bank y4; struct s5p_gpio_bank y5; struct s5p_gpio_bank y6; - struct s5p_gpio_bank res1[0x980]; + struct s5p_gpio_bank res1[0x3]; + struct s5p_gpio_bank c4; + struct s5p_gpio_bank res2[0x48]; struct s5p_gpio_bank x0; struct s5p_gpio_bank x1; struct s5p_gpio_bank x2; @@ -122,9 +124,10 @@ struct exynos5_gpio_part2 { struct exynos5_gpio_part3 { struct s5p_gpio_bank v0; struct s5p_gpio_bank v1; + struct s5p_gpio_bank res1[0x1]; struct s5p_gpio_bank v2; struct s5p_gpio_bank v3; - struct s5p_gpio_bank res1[0x20]; + struct s5p_gpio_bank res2[0x1]; struct s5p_gpio_bank v4; }; diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index e5467e242d..d2fdb59817 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -859,4 +859,9 @@ void set_usbhost_phy_ctrl(unsigned int enable); #define POWER_USB_HOST_PHY_CTRL_EN (1 << 0) #define POWER_USB_HOST_PHY_CTRL_DISABLE (0 << 0) + +void set_dp_phy_ctrl(unsigned int enable); + +#define EXYNOS_DP_PHY_ENABLE (1 << 0) + #endif diff --git a/arch/arm/include/asm/arch-exynos/pwm_backlight.h b/arch/arm/include/asm/arch-exynos/pwm_backlight.h new file mode 100644 index 0000000000..368ffc5cd7 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/pwm_backlight.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _PWM_BACKLIGHT_H_ +#define _PWM_BACKLIGHT_H_ + +struct pwm_backlight_data { + int pwm_id; + int period; + int max_brightness; + int brightness; +}; + +extern int exynos_pwm_backlight_init(struct pwm_backlight_data *pd); + +#endif /* _PWM_BACKLIGHT_H_ */ diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h new file mode 100644 index 0000000000..306b41d825 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/spl.h @@ -0,0 +1,97 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_EXYNOS_SPL_H__ +#define __ASM_ARCH_EXYNOS_SPL_H__ + +#include <asm/arch-exynos/dmc.h> + +enum boot_mode { + /* + * Assign the OM pin values for respective boot modes. + * Exynos4 does not support spi boot and the mmc boot OM + * pin values are the same across Exynos4 and Exynos5. + */ + BOOT_MODE_MMC = 4, + BOOT_MODE_SERIAL = 20, + /* Boot based on Operating Mode pin settings */ + BOOT_MODE_OM = 32, + BOOT_MODE_USB, /* Boot using USB download */ +}; + +#ifndef __ASSEMBLY__ +/* Parameters of early board initialization in SPL */ +struct spl_machine_param { + /* Add fields as and when required */ + u32 signature; + u32 version; /* Version number */ + u32 size; /* Size of block */ + /** + * Parameters we expect, in order, terminated with \0. Each parameter + * is a single character representing one 32-bit word in this + * structure. + * + * Valid characters in this string are: + * + * Code Name + * v mem_iv_size + * m mem_type + * u uboot_size + * b boot_source + * f frequency_mhz (memory frequency in MHz) + * a ARM clock frequency in MHz + * s serial base address + * i i2c base address for early access (meant for PMIC) + * r board rev GPIO numbers used to read board revision + * (lower halfword=bit 0, upper=bit 1) + * M Memory Manufacturer name + * \0 termination + */ + char params[12]; /* Length must be word-aligned */ + u32 mem_iv_size; /* Memory channel interleaving size */ + enum ddr_mode mem_type; /* Type of on-board memory */ + /* + * U-boot size - The iROM mmc copy function used by the SPL takes a + * block count paramter to describe the u-boot size unlike the spi + * boot copy function which just uses the u-boot size directly. Align + * the u-boot size to block size (512 bytes) when populating the SPL + * table only for mmc boot. + */ + u32 uboot_size; + enum boot_mode boot_source; /* Boot device */ + enum mem_manuf mem_manuf; /* Memory Manufacturer */ + unsigned frequency_mhz; /* Frequency of memory in MHz */ + unsigned arm_freq_mhz; /* ARM Frequency in MHz */ + u32 serial_base; /* Serial base address */ + u32 i2c_base; /* i2c base address */ +} __attribute__((__packed__)); +#endif + +/** + * Validate signature and return a pointer to the parameter table. If the + * signature is invalid, call panic() and never return. + * + * @return pointer to the parameter table if signature matched or never return. + */ +struct spl_machine_param *spl_get_machine_params(void); + +#endif /* __ASM_ARCH_EXYNOS_SPL_H__ */ diff --git a/arch/arm/include/asm/arch-imx/imx-regs.h b/arch/arm/include/asm/arch-imx/imx-regs.h index ec94ba913f..4de0779d28 100644 --- a/arch/arm/include/asm/arch-imx/imx-regs.h +++ b/arch/arm/include/asm/arch-imx/imx-regs.h @@ -1,5 +1,8 @@ #ifndef _IMX_REGS_H #define _IMX_REGS_H + +#define ARCH_MXC + /* ------------------------------------------------------------------------ * Motorola IMX system registers * ------------------------------------------------------------------------ diff --git a/arch/arm/include/asm/arch-mx25/gpio.h b/arch/arm/include/asm/arch-mx25/gpio.h index dc6edc7c85..61c0b0d723 100644 --- a/arch/arm/include/asm/arch-mx25/gpio.h +++ b/arch/arm/include/asm/arch-mx25/gpio.h @@ -25,21 +25,6 @@ #ifndef __ASM_ARCH_MX25_GPIO_H #define __ASM_ARCH_MX25_GPIO_H -/* Converts a GPIO port number and the internal bit position - * to the GPIO number - */ -#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit & 0x1f)) - -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; /* data */ - u32 gpio_dir; /* direction */ - u32 psr; /* pad satus */ - u32 icr1; /* interrupt config 1 */ - u32 icr2; /* interrupt config 2 */ - u32 imr; /* interrupt mask */ - u32 isr; /* interrupt status */ - u32 edge_sel; /* edge select */ -}; +#include <asm/imx-common/gpio.h> #endif diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index cf925d70d5..672f9d74b8 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -172,6 +172,8 @@ struct aips_regs { #endif +#define ARCH_MXC + /* AIPS 1 */ #define IMX_AIPS1_BASE (0x43F00000) #define IMX_MAX_BASE (0x43F04000) diff --git a/arch/arm/include/asm/arch-mx27/gpio.h b/arch/arm/include/asm/arch-mx27/gpio.h new file mode 100644 index 0000000000..4b4eb0d5c0 --- /dev/null +++ b/arch/arm/include/asm/arch-mx27/gpio.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2012 + * Philippe Reynes <tremyfr@yahoo.fr> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __ASM_ARCH_MX27_GPIO_H +#define __ASM_ARCH_MX27_GPIO_H + +/* GPIO registers */ +struct gpio_regs { + u32 gpio_dir; /* DDIR */ + u32 ocr1; + u32 ocr2; + u32 iconfa1; + u32 iconfa2; + u32 iconfb1; + u32 iconfb2; + u32 gpio_dr; /* DR */ + u32 gius; + u32 gpio_psr; /* SSR */ + u32 icr1; + u32 icr2; + u32 imr; + u32 isr; + u32 gpr; + u32 swr; + u32 puen; + u32 res[0x2f]; +}; + +/* This structure is used by the function imx_gpio_mode */ +struct gpio_port_regs { + struct gpio_regs port[6]; +}; + +#endif diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h index ced5b2a38c..2f6c823722 100644 --- a/arch/arm/include/asm/arch-mx27/imx-regs.h +++ b/arch/arm/include/asm/arch-mx27/imx-regs.h @@ -24,6 +24,8 @@ #ifndef _IMX_REGS_H #define _IMX_REGS_H +#include <asm/arch/regs-rtc.h> + #ifndef __ASSEMBLY__ extern void imx_gpio_mode (int gpio_mode); @@ -162,29 +164,6 @@ struct gpt_regs { #define PORTE 4 #define PORTF 5 -struct gpio_regs { - struct { - u32 ddir; - u32 ocr1; - u32 ocr2; - u32 iconfa1; - u32 iconfa2; - u32 iconfb1; - u32 iconfb2; - u32 dr; - u32 gius; - u32 ssr; - u32 icr1; - u32 icr2; - u32 imr; - u32 isr; - u32 gpr; - u32 swr; - u32 puen; - u32 res[0x2f]; - } port[6]; -}; - /* IIM Control Registers */ struct iim_regs { u32 iim_stat; @@ -217,6 +196,8 @@ struct fuse_bank0_regs { #endif +#define ARCH_MXC + #define IMX_IO_BASE 0x10000000 #define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) @@ -224,6 +205,7 @@ struct fuse_bank0_regs { #define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE) #define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE) #define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE) +#define IMX_RTC_BASE (0x07000 + IMX_IO_BASE) #define UART1_BASE (0x0a000 + IMX_IO_BASE) #define UART2_BASE (0x0b000 + IMX_IO_BASE) #define UART3_BASE (0x0c000 + IMX_IO_BASE) @@ -471,6 +453,13 @@ struct fuse_bank0_regs { #define TSTAT_CAPT (1 << 1) /* Capture event */ #define TSTAT_COMP 1 /* Compare event */ +#define GPIO1_BASE_ADDR 0x10015000 +#define GPIO2_BASE_ADDR 0x10015100 +#define GPIO3_BASE_ADDR 0x10015200 +#define GPIO4_BASE_ADDR 0x10015300 +#define GPIO5_BASE_ADDR 0x10015400 +#define GPIO6_BASE_ADDR 0x10015500 + #define GPIO_PIN_MASK 0x1f #define GPIO_PORT_SHIFT 5 diff --git a/arch/arm/include/asm/arch-mx27/regs-rtc.h b/arch/arm/include/asm/arch-mx27/regs-rtc.h new file mode 100644 index 0000000000..4f92d0f8f5 --- /dev/null +++ b/arch/arm/include/asm/arch-mx27/regs-rtc.h @@ -0,0 +1,40 @@ +/* + * Freescale i.MX27 RTC Register Definitions + * + * Copyright (C) 2012 Philippe Reynes <tremyfr@yahoo.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MX27_REGS_RTC_H__ +#define __MX27_REGS_RTC_H__ + +#ifndef __ASSEMBLY__ +struct rtc_regs { + u32 hourmin; + u32 seconds; + u32 alrm_hm; + u32 alrm_sec; + u32 rtcctl; + u32 rtcisr; + u32 rtcienr; + u32 stpwch; + u32 dayr; + u32 dayalarm; +}; +#endif /* __ASSEMBLY__*/ + +#endif /* __MX28_REGS_RTC_H__ */ diff --git a/arch/arm/include/asm/arch-mx31/gpio.h b/arch/arm/include/asm/arch-mx31/gpio.h index 95b73bfc34..55c0afa809 100644 --- a/arch/arm/include/asm/arch-mx31/gpio.h +++ b/arch/arm/include/asm/arch-mx31/gpio.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MX31_GPIO_H #define __ASM_ARCH_MX31_GPIO_H -/* GPIO Registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; +#include <asm/imx-common/gpio.h> #endif diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 7ddbbd627c..1dd952c55f 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -541,6 +541,8 @@ struct esdc_regs { #endif +#define ARCH_MXC + #define __REG(x) (*((volatile u32 *)(x))) #define __REG16(x) (*((volatile u16 *)(x))) #define __REG8(x) (*((volatile u8 *)(x))) @@ -669,7 +671,7 @@ struct esdc_regs { #define IPU_CONF_PF_EN (1<<3) #define IPU_CONF_ROT_EN (1<<2) #define IPU_CONF_IC_EN (1<<1) -#define IPU_CONF_SCI_EN (1<<0) +#define IPU_CONF_CSI_EN (1<<0) #define ARM_PPMRR 0x40000015 diff --git a/arch/arm/include/asm/arch-mx35/clock.h b/arch/arm/include/asm/arch-mx35/clock.h index 4c0ddfd440..e94f124479 100644 --- a/arch/arm/include/asm/arch-mx35/clock.h +++ b/arch/arm/include/asm/arch-mx35/clock.h @@ -25,7 +25,7 @@ #define __ASM_ARCH_CLOCK_H enum mxc_clock { - MXC_ARM_CLK = 0, + MXC_ARM_CLK, MXC_AHB_CLK, MXC_IPG_CLK, MXC_IPG_PERCLK, @@ -36,7 +36,31 @@ enum mxc_clock { MXC_FEC_CLK, }; -unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref); +enum mxc_main_clock { + CPU_CLK, + AHB_CLK, + IPG_CLK, + IPG_PER_CLK, + NFC_CLK, + USB_CLK, + HSP_CLK, +}; + +enum mxc_peri_clock { + UART1_BAUD, + UART2_BAUD, + UART3_BAUD, + SSI1_BAUD, + SSI2_BAUD, + CSI_BAUD, + MSHC_CLK, + ESDHC1_CLK, + ESDHC2_CLK, + ESDHC3_CLK, + SPDIF_CLK, + SPI1_CLK, + SPI2_CLK, +}; u32 imx_get_uartclk(void); u32 imx_get_fecclk(void); diff --git a/arch/arm/include/asm/arch-mx35/crm_regs.h b/arch/arm/include/asm/arch-mx35/crm_regs.h index e903cf1c4c..7a2d1bbbf1 100644 --- a/arch/arm/include/asm/arch-mx35/crm_regs.h +++ b/arch/arm/include/asm/arch-mx35/crm_regs.h @@ -158,8 +158,8 @@ #define MXC_CCM_CGR0_CSPI2_MASK (0x3 << 12) #define MXC_CCM_CGR0_ECT_OFFSET 14 #define MXC_CCM_CGR0_ECT_MASK (0x3 << 14) -#define MXC_CCM_CGR0_EDI0_OFFSET 16 -#define MXC_CCM_CGR0_EDI0_MASK (0x3 << 16) +#define MXC_CCM_CGR0_EDIO_OFFSET 16 +#define MXC_CCM_CGR0_EDIO_MASK (0x3 << 16) #define MXC_CCM_CGR0_EMI_OFFSET 18 #define MXC_CCM_CGR0_EMI_MASK (0x3 << 18) #define MXC_CCM_CGR0_EPIT1_OFFSET 20 diff --git a/arch/arm/include/asm/arch-mx35/gpio.h b/arch/arm/include/asm/arch-mx35/gpio.h index 7bcc3e8688..1deb2927a0 100644 --- a/arch/arm/include/asm/arch-mx35/gpio.h +++ b/arch/arm/include/asm/arch-mx35/gpio.h @@ -25,16 +25,6 @@ #ifndef __ASM_ARCH_MX35_GPIO_H #define __ASM_ARCH_MX35_GPIO_H -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; /* data */ - u32 gpio_dir; /* direction */ - u32 psr; /* pad satus */ - u32 icr1; /* interrupt config 1 */ - u32 icr2; /* interrupt config 2 */ - u32 imr; /* interrupt mask */ - u32 isr; /* interrupt status */ - u32 edge_sel; /* edge select */ -}; +#include <asm/imx-common/gpio.h> #endif diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index 314600621c..2c6e59c324 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -25,6 +25,8 @@ #ifndef __ASM_ARCH_MX35_H #define __ASM_ARCH_MX35_H +#define ARCH_MXC + /* * IRAM */ @@ -72,7 +74,6 @@ #define MMC_SDHC2_BASE_ADDR 0x53FB8000 #define MMC_SDHC3_BASE_ADDR 0x53FBC000 #define IPU_CTRL_BASE_ADDR 0x53FC0000 -#define GPIO3_BASE_ADDR 0x53FA4000 #define GPIO1_BASE_ADDR 0x53FCC000 #define GPIO2_BASE_ADDR 0x53FD0000 #define SDMA_BASE_ADDR 0x53FD4000 @@ -177,7 +178,7 @@ #define IPU_CONF_PF_EN (1<<3) #define IPU_CONF_ROT_EN (1<<2) #define IPU_CONF_IC_EN (1<<1) -#define IPU_CONF_SCI_EN (1<<0) +#define IPU_CONF_CSI_EN (1<<0) /* * CSPI register definitions @@ -216,32 +217,6 @@ #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> -enum mxc_main_clocks { - CPU_CLK, - AHB_CLK, - IPG_CLK, - IPG_PER_CLK, - NFC_CLK, - USB_CLK, - HSP_CLK, -}; - -enum mxc_peri_clocks { - UART1_BAUD, - UART2_BAUD, - UART3_BAUD, - SSI1_BAUD, - SSI2_BAUD, - CSI_BAUD, - MSHC_CLK, - ESDHC1_CLK, - ESDHC2_CLK, - ESDHC3_CLK, - SPDIF_CLK, - SPI1_CLK, - SPI2_CLK, -}; - /* Clock Control Module (CCM) registers */ struct ccm_regs { u32 ccmr; /* Control */ diff --git a/arch/arm/include/asm/arch-mx35/mx35_pins.h b/arch/arm/include/asm/arch-mx35/mx35_pins.h index 8c38139118..00e5e75835 100644 --- a/arch/arm/include/asm/arch-mx35/mx35_pins.h +++ b/arch/arm/include/asm/arch-mx35/mx35_pins.h @@ -347,9 +347,6 @@ typedef enum iomux_pins { MX35_PIN_FEC_TDATA2 = _MXC_BUILD_GPIO_PIN(2, 21, 0x31C, 0x780), MX35_PIN_FEC_RDATA3 = _MXC_BUILD_GPIO_PIN(2, 22, 0x320, 0x784), MX35_PIN_FEC_TDATA3 = _MXC_BUILD_GPIO_PIN(2, 23, 0x324, 0x788), - - MX35_PIN_RTS2_UART3_RXD_MUX = _MXC_BUILD_NON_GPIO_PIN(0x1a0, 0x5e4), - MX35_PIN_CTS2_UART3_TXD_MUX = _MXC_BUILD_NON_GPIO_PIN(0x1a4, 0x5e8), } iomux_pin_name_t; #endif diff --git a/arch/arm/include/asm/arch-mx35/sys_proto.h b/arch/arm/include/asm/arch-mx35/sys_proto.h index 422eb520aa..9c0d51321d 100644 --- a/arch/arm/include/asm/arch-mx35/sys_proto.h +++ b/arch/arm/include/asm/arch-mx35/sys_proto.h @@ -26,6 +26,5 @@ u32 get_cpu_rev(void); #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) -void sdelay(unsigned long); #endif diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h index 36ea03082f..8d8fa18fc5 100644 --- a/arch/arm/include/asm/arch-mx5/clock.h +++ b/arch/arm/include/asm/arch-mx5/clock.h @@ -38,8 +38,6 @@ enum mxc_clock { MXC_PERIPH_CLK, }; -unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref); - u32 imx_get_uartclk(void); u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); diff --git a/arch/arm/include/asm/arch-mx5/gpio.h b/arch/arm/include/asm/arch-mx5/gpio.h index 1dc34e9164..b1b1218083 100644 --- a/arch/arm/include/asm/arch-mx5/gpio.h +++ b/arch/arm/include/asm/arch-mx5/gpio.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MX5_GPIO_H #define __ASM_ARCH_MX5_GPIO_H -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; +#include <asm/imx-common/gpio.h> #endif diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 7f66b61b3c..d1ef15d043 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -23,6 +23,8 @@ #ifndef __ASM_ARCH_MX5_IMX_REGS_H__ #define __ASM_ARCH_MX5_IMX_REGS_H__ +#define ARCH_MXC + #if defined(CONFIG_MX51) #define IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ #define IPU_SOC_BASE_ADDR 0x40000000 @@ -459,6 +461,24 @@ struct src { u32 simr; }; +struct srtc_regs { + u32 lpscmr; /* 0x00 */ + u32 lpsclr; /* 0x04 */ + u32 lpsar; /* 0x08 */ + u32 lpsmcr; /* 0x0c */ + u32 lpcr; /* 0x10 */ + u32 lpsr; /* 0x14 */ + u32 lppdr; /* 0x18 */ + u32 lpgr; /* 0x1c */ + u32 hpcmr; /* 0x20 */ + u32 hpclr; /* 0x24 */ + u32 hpamr; /* 0x28 */ + u32 hpalr; /* 0x2c */ + u32 hpcr; /* 0x30 */ + u32 hpisr; /* 0x34 */ + u32 hpienr; /* 0x38 */ +}; + /* CSPI registers */ struct cspi_regs { u32 rxdata; diff --git a/arch/arm/include/asm/arch-mx5/iomux-mx51.h b/arch/arm/include/asm/arch-mx5/iomux-mx51.h new file mode 100644 index 0000000000..4f37295994 --- /dev/null +++ b/arch/arm/include/asm/arch-mx5/iomux-mx51.h @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2009-2012 Genesi USA, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The vast majority of this file is taken from the Linux kernel at + * commit 5d23b39 + */ + +#ifndef __IOMUX_MX51_H__ +#define __IOMUX_MX51_H__ + +#include <asm/imx-common/iomux-v3.h> + +#define PAD_CTL_DVS (1 << 13) +#define PAD_CTL_INPUT_DDR (1 << 9) +#define PAD_CTL_HYS (1 << 8) + +#define PAD_CTL_PKE (1 << 7) +#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) +#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) + +#define PAD_CTL_ODE (1 << 3) + +#define PAD_CTL_DSE_LOW (0 << 1) +#define PAD_CTL_DSE_MED (1 << 1) +#define PAD_CTL_DSE_HIGH (2 << 1) +#define PAD_CTL_DSE_MAX (3 << 1) + +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) + +/* Pad control groupings */ +#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_HYS | PAD_CTL_SRE_FAST) +#define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS) +#define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS) +#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \ + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_HYS | PAD_CTL_PUE) +#define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \ + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) +#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \ + PAD_CTL_SRE_FAST | PAD_CTL_DVS) +#define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST) + +#define __NA_ 0x000 + +/* + * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num> + * See also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ +enum { + MX51_PAD_EIM_D16__USBH2_DATA0 = IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D17__USBH2_DATA1 = IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D18__USBH2_DATA2 = IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D19__USBH2_DATA3 = IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D20__USBH2_DATA4 = IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D21__USBH2_DATA5 = IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D22__USBH2_DATA6 = IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D23__USBH2_DATA7 = IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D27__GPIO2_9 = IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_A24__USBH2_CLK = IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_A25__USBH2_DIR = IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_A26__GPIO2_20 = IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_A26__USBH2_STP = IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_A27__USBH2_NXT = IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_CS0__GPIO2_25 = IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_CS2__SD1_CD = IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_EIM_CS3__GPIO2_28 = IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_CS4__GPIO2_29 = IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_NANDF_WE_B__PATA_DIOW = IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RE_B__PATA_DIOR = IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_ALE__PATA_BUFFER_EN = IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CLE__PATA_RESET_B = IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_WP_B__PATA_DMACK = IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RB0__PATA_DMARQ = IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RB1__PATA_IORDY = IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_GPIO_NAND__PATA_INTRQ = IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS2__PATA_CS_0 = IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS3__PATA_CS_1 = IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS4__PATA_DA_0 = IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS5__PATA_DA_1 = IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS6__PATA_DA_2 = IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D15__PATA_DATA15 = IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D14__PATA_DATA14 = IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D13__PATA_DATA13 = IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D12__PATA_DATA12 = IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D11__PATA_DATA11 = IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D10__PATA_DATA10 = IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D9__PATA_DATA9 = IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D8__PATA_DATA8 = IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D7__PATA_DATA7 = IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D6__PATA_DATA6 = IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D5__PATA_DATA5 = IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D4__PATA_DATA4 = IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D3__PATA_DATA3 = IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D2__PATA_DATA2 = IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D1__PATA_DATA1 = IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D0__PATA_DATA0 = IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI = IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_CSPI1_MISO__ECSPI1_MISO = IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_CSPI1_SS0__GPIO4_24 = IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_SS1__GPIO4_25 = IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK = IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL), + MX51_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL), + MX51_PAD_UART1_RTS__UART1_RTS = IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL), + MX51_PAD_UART1_CTS__UART1_CTS = IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL), + MX51_PAD_USBH1_CLK__USBH1_CLK = IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DIR__USBH1_DIR = IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_STP__USBH1_STP = IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_STP__GPIO1_27 = IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_USBH1_NXT__USBH1_NXT = IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA0__USBH1_DATA0 = IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA1__USBH1_DATA1 = IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA2__USBH1_DATA2 = IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA3__USBH1_DATA3 = IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA4__USBH1_DATA4 = IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA5__USBH1_DATA5 = IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA6__USBH1_DATA6 = IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_DATA7__USBH1_DATA7 = IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS), + MX51_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_GPIO1_0__SD1_CD = IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_GPIO1_1__SD1_WP = IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_SD2_CMD__SD2_CMD = IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_CLK__SD2_CLK = IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS), + MX51_PAD_SD2_DATA0__SD2_DATA0 = IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_DATA1__SD2_DATA1 = IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_DATA2__SD2_DATA2 = IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_SD2_DATA3__SD2_DATA3 = IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_GPIO1_3__GPIO1_3 = IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_5__GPIO1_5 = IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_6__GPIO1_6 = IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_7__SD2_WP = IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_GPIO1_8__SD2_CD = IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL), +}; + +#endif /* __IOMUX_MX51_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/gpio.h b/arch/arm/include/asm/arch-mx6/gpio.h index 20c4e57484..24c10f8bce 100644 --- a/arch/arm/include/asm/arch-mx6/gpio.h +++ b/arch/arm/include/asm/arch-mx6/gpio.h @@ -25,11 +25,6 @@ #ifndef __ASM_ARCH_MX6_GPIO_H #define __ASM_ARCH_MX6_GPIO_H -/* GPIO registers */ -struct gpio_regs { - u32 gpio_dr; - u32 gpio_dir; - u32 gpio_psr; -}; +#include <asm/imx-common/gpio.h> #endif /* __ASM_ARCH_MX6_GPIO_H */ diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 5d77603ebf..8834c59dcc 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -19,6 +19,8 @@ #ifndef __ASM_ARCH_MX6_IMX_REGS_H__ #define __ASM_ARCH_MX6_IMX_REGS_H__ +#define ARCH_MXC + #define CONFIG_SYS_CACHELINE_SIZE 32 #define ROMCP_ARB_BASE_ADDR 0x00000000 @@ -172,8 +174,6 @@ #define IMX_IIM_BASE OCOTP_BASE_ADDR #define FEC_QUIRK_ENET_MAC -#define GPIO_NUMBER(port, index) ((((port)-1)*32)+((index)&31)) - #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> @@ -448,5 +448,26 @@ struct iomuxc_base_regs { u32 daisy[104]; /* 0x7b0..94c */ }; +struct src_regs { + u32 scr; /* 0x00 */ + u32 sbmr1; /* 0x04 */ + u32 srsr; /* 0x08 */ + u32 reserved1; /* 0x0c */ + u32 reserved2; /* 0x10 */ + u32 sisr; /* 0x14 */ + u32 simr; /* 0x18 */ + u32 sbmr2; /* 0x1c */ + u32 gpr1; /* 0x20 */ + u32 gpr2; /* 0x24 */ + u32 gpr3; /* 0x28 */ + u32 gpr4; /* 0x2c */ + u32 gpr5; /* 0x30 */ + u32 gpr6; /* 0x34 */ + u32 gpr7; /* 0x38 */ + u32 gpr8; /* 0x3c */ + u32 gpr9; /* 0x40 */ + u32 gpr10; /* 0x44 */ +}; + #endif /* __ASSEMBLER__*/ #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h new file mode 100644 index 0000000000..a1255f9bd5 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -0,0 +1,129 @@ +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_IOMUX_H__ +#define __ASM_ARCH_IOMUX_H__ +/* + * IOMUXC_GPR13 bit fields + */ +#define IOMUXC_GPR13_SDMA_STOP_REQ (1<<30) +#define IOMUXC_GPR13_CAN2_STOP_REQ (1<<29) +#define IOMUXC_GPR13_CAN1_STOP_REQ (1<<28) +#define IOMUXC_GPR13_ENET_STOP_REQ (1<<27) +#define IOMUXC_GPR13_SATA_PHY_8_MASK (7<<24) +#define IOMUXC_GPR13_SATA_PHY_7_MASK (0x1f<<19) +#define IOMUXC_GPR13_SATA_PHY_6_SHIFT 16 +#define IOMUXC_GPR13_SATA_PHY_6_MASK (7<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) +#define IOMUXC_GPR13_SATA_SPEED_MASK (1<<15) +#define IOMUXC_GPR13_SATA_PHY_5_MASK (1<<14) +#define IOMUXC_GPR13_SATA_PHY_4_MASK (7<<11) +#define IOMUXC_GPR13_SATA_PHY_3_MASK (0x1f<<7) +#define IOMUXC_GPR13_SATA_PHY_2_MASK (0x1f<<2) +#define IOMUXC_GPR13_SATA_PHY_1_MASK (3<<0) + +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0b000<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (0b001<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (0b010<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB (0b011<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB (0b100<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB (0b101<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB (0b110<<24) +#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB (0b111<<24) + +#define IOMUXC_GPR13_SATA_PHY_7_SATA1I (0b10000<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA1M (0b10000<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA1X (0b11010<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA2I (0b10010<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA2M (0b10010<<19) +#define IOMUXC_GPR13_SATA_PHY_7_SATA2X (0b11010<<19) + +#define IOMUXC_GPR13_SATA_SPEED_1P5G (0<<15) +#define IOMUXC_GPR13_SATA_SPEED_3G (1<<15) + +#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED (0<<14) +#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_ENABLED (1<<14) + +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_16_16 (0<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_14_16 (1<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_12_16 (2<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_10_16 (3<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 (4<<11) +#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_8_16 (5<<11) + +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB (0b0000<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB (0b0001<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB (0b0010<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB (0b0011<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB (0b0100<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB (0b0101<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB (0b0110<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB (0b0111<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB (0b1000<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB (0b1001<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB (0b1010<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB (0b1011<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB (0b1100<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB (0b1101<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB (0b1110<<7) +#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB (0b1111<<7) + +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V (0b00000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V (0b00001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V (0b00010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V (0b00011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V (0b00100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V (0b00101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V (0b00110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V (0b00111<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V (0b01000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V (0b01001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V (0b01010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V (0b01011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V (0b01100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V (0b01101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V (0b01110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V (0b01111<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V (0b10000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V (0b10001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V (0b10010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V (0b10011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V (0b10100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V (0b10101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V (0b10110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V (0b10111<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V (0b11000<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V (0b11001<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V (0b11010<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V (0b11011<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V (0b11100<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V (0b11101<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V (0b11110<<2) +#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V (0b11111<<2) + +#define IOMUXC_GPR13_SATA_PHY_1_FAST 0 +#define IOMUXC_GPR13_SATA_PHY_1_MEDIUM 1 +#define IOMUXC_GPR13_SATA_PHY_1_SLOW 2 + +#define IOMUXC_GPR13_SATA_MASK (IOMUXC_GPR13_SATA_PHY_8_MASK \ + |IOMUXC_GPR13_SATA_PHY_7_MASK \ + |IOMUXC_GPR13_SATA_PHY_6_MASK \ + |IOMUXC_GPR13_SATA_SPEED_MASK \ + |IOMUXC_GPR13_SATA_PHY_5_MASK \ + |IOMUXC_GPR13_SATA_PHY_4_MASK \ + |IOMUXC_GPR13_SATA_PHY_3_MASK \ + |IOMUXC_GPR13_SATA_PHY_2_MASK \ + |IOMUXC_GPR13_SATA_PHY_1_MASK) +#endif /* __ASM_ARCH_IOMUX_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/clock.h b/arch/arm/include/asm/arch-mxs/clock.h index 1700fe3915..1700fe3915 100644 --- a/arch/arm/include/asm/arch-mx28/clock.h +++ b/arch/arm/include/asm/arch-mxs/clock.h diff --git a/arch/arm/include/asm/arch-mx28/dma.h b/arch/arm/include/asm/arch-mxs/dma.h index 4a1820bdee..a0a0ea5010 100644 --- a/arch/arm/include/asm/arch-mx28/dma.h +++ b/arch/arm/include/asm/arch-mxs/dma.h @@ -27,6 +27,7 @@ #define __DMA_H__ #include <linux/list.h> +#include <linux/compiler.h> #ifndef CONFIG_ARCH_DMA_PIO_WORDS #define DMA_PIO_WORDS 15 @@ -109,7 +110,7 @@ struct mxs_dma_desc { dma_addr_t address; void *buffer; struct list_head node; -}; +} __aligned(MXS_DMA_ALIGNMENT); /** * MXS DMA channel diff --git a/arch/arm/include/asm/arch-mx28/gpio.h b/arch/arm/include/asm/arch-mxs/gpio.h index be1c944eb7..be1c944eb7 100644 --- a/arch/arm/include/asm/arch-mx28/gpio.h +++ b/arch/arm/include/asm/arch-mxs/gpio.h diff --git a/arch/arm/include/asm/arch-mx28/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h index 37d0a93768..5e1901e6c4 100644 --- a/arch/arm/include/asm/arch-mx28/imx-regs.h +++ b/arch/arm/include/asm/arch-mxs/imx-regs.h @@ -26,7 +26,7 @@ #include <asm/arch/regs-apbh.h> #include <asm/arch/regs-base.h> #include <asm/arch/regs-bch.h> -#include <asm/arch/regs-clkctrl.h> +#include <asm/arch/regs-clkctrl-mx28.h> #include <asm/arch/regs-digctl.h> #include <asm/arch/regs-gpmi.h> #include <asm/arch/regs-i2c.h> diff --git a/arch/arm/include/asm/arch-mx28/iomux-mx28.h b/arch/arm/include/asm/arch-mxs/iomux-mx28.h index b42820de74..b42820de74 100644 --- a/arch/arm/include/asm/arch-mx28/iomux-mx28.h +++ b/arch/arm/include/asm/arch-mxs/iomux-mx28.h diff --git a/arch/arm/include/asm/arch-mx28/iomux.h b/arch/arm/include/asm/arch-mxs/iomux.h index 7abdf58b8b..7abdf58b8b 100644 --- a/arch/arm/include/asm/arch-mx28/iomux.h +++ b/arch/arm/include/asm/arch-mxs/iomux.h diff --git a/arch/arm/include/asm/arch-mx28/regs-apbh.h b/arch/arm/include/asm/arch-mxs/regs-apbh.h index 91d7bc8400..e18e677e33 100644 --- a/arch/arm/include/asm/arch-mx28/regs-apbh.h +++ b/arch/arm/include/asm/arch-mxs/regs-apbh.h @@ -29,143 +29,143 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_apbh_regs { - mx28_reg_32(hw_apbh_ctrl0) - mx28_reg_32(hw_apbh_ctrl1) - mx28_reg_32(hw_apbh_ctrl2) - mx28_reg_32(hw_apbh_channel_ctrl) - mx28_reg_32(hw_apbh_devsel) - mx28_reg_32(hw_apbh_dma_burst_size) - mx28_reg_32(hw_apbh_debug) +struct mxs_apbh_regs { + mxs_reg_32(hw_apbh_ctrl0) + mxs_reg_32(hw_apbh_ctrl1) + mxs_reg_32(hw_apbh_ctrl2) + mxs_reg_32(hw_apbh_channel_ctrl) + mxs_reg_32(hw_apbh_devsel) + mxs_reg_32(hw_apbh_dma_burst_size) + mxs_reg_32(hw_apbh_debug) uint32_t reserved[36]; union { struct { - mx28_reg_32(hw_apbh_ch_curcmdar) - mx28_reg_32(hw_apbh_ch_nxtcmdar) - mx28_reg_32(hw_apbh_ch_cmd) - mx28_reg_32(hw_apbh_ch_bar) - mx28_reg_32(hw_apbh_ch_sema) - mx28_reg_32(hw_apbh_ch_debug1) - mx28_reg_32(hw_apbh_ch_debug2) + mxs_reg_32(hw_apbh_ch_curcmdar) + mxs_reg_32(hw_apbh_ch_nxtcmdar) + mxs_reg_32(hw_apbh_ch_cmd) + mxs_reg_32(hw_apbh_ch_bar) + mxs_reg_32(hw_apbh_ch_sema) + mxs_reg_32(hw_apbh_ch_debug1) + mxs_reg_32(hw_apbh_ch_debug2) } ch[16]; struct { - mx28_reg_32(hw_apbh_ch0_curcmdar) - mx28_reg_32(hw_apbh_ch0_nxtcmdar) - mx28_reg_32(hw_apbh_ch0_cmd) - mx28_reg_32(hw_apbh_ch0_bar) - mx28_reg_32(hw_apbh_ch0_sema) - mx28_reg_32(hw_apbh_ch0_debug1) - mx28_reg_32(hw_apbh_ch0_debug2) - mx28_reg_32(hw_apbh_ch1_curcmdar) - mx28_reg_32(hw_apbh_ch1_nxtcmdar) - mx28_reg_32(hw_apbh_ch1_cmd) - mx28_reg_32(hw_apbh_ch1_bar) - mx28_reg_32(hw_apbh_ch1_sema) - mx28_reg_32(hw_apbh_ch1_debug1) - mx28_reg_32(hw_apbh_ch1_debug2) - mx28_reg_32(hw_apbh_ch2_curcmdar) - mx28_reg_32(hw_apbh_ch2_nxtcmdar) - mx28_reg_32(hw_apbh_ch2_cmd) - mx28_reg_32(hw_apbh_ch2_bar) - mx28_reg_32(hw_apbh_ch2_sema) - mx28_reg_32(hw_apbh_ch2_debug1) - mx28_reg_32(hw_apbh_ch2_debug2) - mx28_reg_32(hw_apbh_ch3_curcmdar) - mx28_reg_32(hw_apbh_ch3_nxtcmdar) - mx28_reg_32(hw_apbh_ch3_cmd) - mx28_reg_32(hw_apbh_ch3_bar) - mx28_reg_32(hw_apbh_ch3_sema) - mx28_reg_32(hw_apbh_ch3_debug1) - mx28_reg_32(hw_apbh_ch3_debug2) - mx28_reg_32(hw_apbh_ch4_curcmdar) - mx28_reg_32(hw_apbh_ch4_nxtcmdar) - mx28_reg_32(hw_apbh_ch4_cmd) - mx28_reg_32(hw_apbh_ch4_bar) - mx28_reg_32(hw_apbh_ch4_sema) - mx28_reg_32(hw_apbh_ch4_debug1) - mx28_reg_32(hw_apbh_ch4_debug2) - mx28_reg_32(hw_apbh_ch5_curcmdar) - mx28_reg_32(hw_apbh_ch5_nxtcmdar) - mx28_reg_32(hw_apbh_ch5_cmd) - mx28_reg_32(hw_apbh_ch5_bar) - mx28_reg_32(hw_apbh_ch5_sema) - mx28_reg_32(hw_apbh_ch5_debug1) - mx28_reg_32(hw_apbh_ch5_debug2) - mx28_reg_32(hw_apbh_ch6_curcmdar) - mx28_reg_32(hw_apbh_ch6_nxtcmdar) - mx28_reg_32(hw_apbh_ch6_cmd) - mx28_reg_32(hw_apbh_ch6_bar) - mx28_reg_32(hw_apbh_ch6_sema) - mx28_reg_32(hw_apbh_ch6_debug1) - mx28_reg_32(hw_apbh_ch6_debug2) - mx28_reg_32(hw_apbh_ch7_curcmdar) - mx28_reg_32(hw_apbh_ch7_nxtcmdar) - mx28_reg_32(hw_apbh_ch7_cmd) - mx28_reg_32(hw_apbh_ch7_bar) - mx28_reg_32(hw_apbh_ch7_sema) - mx28_reg_32(hw_apbh_ch7_debug1) - mx28_reg_32(hw_apbh_ch7_debug2) - mx28_reg_32(hw_apbh_ch8_curcmdar) - mx28_reg_32(hw_apbh_ch8_nxtcmdar) - mx28_reg_32(hw_apbh_ch8_cmd) - mx28_reg_32(hw_apbh_ch8_bar) - mx28_reg_32(hw_apbh_ch8_sema) - mx28_reg_32(hw_apbh_ch8_debug1) - mx28_reg_32(hw_apbh_ch8_debug2) - mx28_reg_32(hw_apbh_ch9_curcmdar) - mx28_reg_32(hw_apbh_ch9_nxtcmdar) - mx28_reg_32(hw_apbh_ch9_cmd) - mx28_reg_32(hw_apbh_ch9_bar) - mx28_reg_32(hw_apbh_ch9_sema) - mx28_reg_32(hw_apbh_ch9_debug1) - mx28_reg_32(hw_apbh_ch9_debug2) - mx28_reg_32(hw_apbh_ch10_curcmdar) - mx28_reg_32(hw_apbh_ch10_nxtcmdar) - mx28_reg_32(hw_apbh_ch10_cmd) - mx28_reg_32(hw_apbh_ch10_bar) - mx28_reg_32(hw_apbh_ch10_sema) - mx28_reg_32(hw_apbh_ch10_debug1) - mx28_reg_32(hw_apbh_ch10_debug2) - mx28_reg_32(hw_apbh_ch11_curcmdar) - mx28_reg_32(hw_apbh_ch11_nxtcmdar) - mx28_reg_32(hw_apbh_ch11_cmd) - mx28_reg_32(hw_apbh_ch11_bar) - mx28_reg_32(hw_apbh_ch11_sema) - mx28_reg_32(hw_apbh_ch11_debug1) - mx28_reg_32(hw_apbh_ch11_debug2) - mx28_reg_32(hw_apbh_ch12_curcmdar) - mx28_reg_32(hw_apbh_ch12_nxtcmdar) - mx28_reg_32(hw_apbh_ch12_cmd) - mx28_reg_32(hw_apbh_ch12_bar) - mx28_reg_32(hw_apbh_ch12_sema) - mx28_reg_32(hw_apbh_ch12_debug1) - mx28_reg_32(hw_apbh_ch12_debug2) - mx28_reg_32(hw_apbh_ch13_curcmdar) - mx28_reg_32(hw_apbh_ch13_nxtcmdar) - mx28_reg_32(hw_apbh_ch13_cmd) - mx28_reg_32(hw_apbh_ch13_bar) - mx28_reg_32(hw_apbh_ch13_sema) - mx28_reg_32(hw_apbh_ch13_debug1) - mx28_reg_32(hw_apbh_ch13_debug2) - mx28_reg_32(hw_apbh_ch14_curcmdar) - mx28_reg_32(hw_apbh_ch14_nxtcmdar) - mx28_reg_32(hw_apbh_ch14_cmd) - mx28_reg_32(hw_apbh_ch14_bar) - mx28_reg_32(hw_apbh_ch14_sema) - mx28_reg_32(hw_apbh_ch14_debug1) - mx28_reg_32(hw_apbh_ch14_debug2) - mx28_reg_32(hw_apbh_ch15_curcmdar) - mx28_reg_32(hw_apbh_ch15_nxtcmdar) - mx28_reg_32(hw_apbh_ch15_cmd) - mx28_reg_32(hw_apbh_ch15_bar) - mx28_reg_32(hw_apbh_ch15_sema) - mx28_reg_32(hw_apbh_ch15_debug1) - mx28_reg_32(hw_apbh_ch15_debug2) + mxs_reg_32(hw_apbh_ch0_curcmdar) + mxs_reg_32(hw_apbh_ch0_nxtcmdar) + mxs_reg_32(hw_apbh_ch0_cmd) + mxs_reg_32(hw_apbh_ch0_bar) + mxs_reg_32(hw_apbh_ch0_sema) + mxs_reg_32(hw_apbh_ch0_debug1) + mxs_reg_32(hw_apbh_ch0_debug2) + mxs_reg_32(hw_apbh_ch1_curcmdar) + mxs_reg_32(hw_apbh_ch1_nxtcmdar) + mxs_reg_32(hw_apbh_ch1_cmd) + mxs_reg_32(hw_apbh_ch1_bar) + mxs_reg_32(hw_apbh_ch1_sema) + mxs_reg_32(hw_apbh_ch1_debug1) + mxs_reg_32(hw_apbh_ch1_debug2) + mxs_reg_32(hw_apbh_ch2_curcmdar) + mxs_reg_32(hw_apbh_ch2_nxtcmdar) + mxs_reg_32(hw_apbh_ch2_cmd) + mxs_reg_32(hw_apbh_ch2_bar) + mxs_reg_32(hw_apbh_ch2_sema) + mxs_reg_32(hw_apbh_ch2_debug1) + mxs_reg_32(hw_apbh_ch2_debug2) + mxs_reg_32(hw_apbh_ch3_curcmdar) + mxs_reg_32(hw_apbh_ch3_nxtcmdar) + mxs_reg_32(hw_apbh_ch3_cmd) + mxs_reg_32(hw_apbh_ch3_bar) + mxs_reg_32(hw_apbh_ch3_sema) + mxs_reg_32(hw_apbh_ch3_debug1) + mxs_reg_32(hw_apbh_ch3_debug2) + mxs_reg_32(hw_apbh_ch4_curcmdar) + mxs_reg_32(hw_apbh_ch4_nxtcmdar) + mxs_reg_32(hw_apbh_ch4_cmd) + mxs_reg_32(hw_apbh_ch4_bar) + mxs_reg_32(hw_apbh_ch4_sema) + mxs_reg_32(hw_apbh_ch4_debug1) + mxs_reg_32(hw_apbh_ch4_debug2) + mxs_reg_32(hw_apbh_ch5_curcmdar) + mxs_reg_32(hw_apbh_ch5_nxtcmdar) + mxs_reg_32(hw_apbh_ch5_cmd) + mxs_reg_32(hw_apbh_ch5_bar) + mxs_reg_32(hw_apbh_ch5_sema) + mxs_reg_32(hw_apbh_ch5_debug1) + mxs_reg_32(hw_apbh_ch5_debug2) + mxs_reg_32(hw_apbh_ch6_curcmdar) + mxs_reg_32(hw_apbh_ch6_nxtcmdar) + mxs_reg_32(hw_apbh_ch6_cmd) + mxs_reg_32(hw_apbh_ch6_bar) + mxs_reg_32(hw_apbh_ch6_sema) + mxs_reg_32(hw_apbh_ch6_debug1) + mxs_reg_32(hw_apbh_ch6_debug2) + mxs_reg_32(hw_apbh_ch7_curcmdar) + mxs_reg_32(hw_apbh_ch7_nxtcmdar) + mxs_reg_32(hw_apbh_ch7_cmd) + mxs_reg_32(hw_apbh_ch7_bar) + mxs_reg_32(hw_apbh_ch7_sema) + mxs_reg_32(hw_apbh_ch7_debug1) + mxs_reg_32(hw_apbh_ch7_debug2) + mxs_reg_32(hw_apbh_ch8_curcmdar) + mxs_reg_32(hw_apbh_ch8_nxtcmdar) + mxs_reg_32(hw_apbh_ch8_cmd) + mxs_reg_32(hw_apbh_ch8_bar) + mxs_reg_32(hw_apbh_ch8_sema) + mxs_reg_32(hw_apbh_ch8_debug1) + mxs_reg_32(hw_apbh_ch8_debug2) + mxs_reg_32(hw_apbh_ch9_curcmdar) + mxs_reg_32(hw_apbh_ch9_nxtcmdar) + mxs_reg_32(hw_apbh_ch9_cmd) + mxs_reg_32(hw_apbh_ch9_bar) + mxs_reg_32(hw_apbh_ch9_sema) + mxs_reg_32(hw_apbh_ch9_debug1) + mxs_reg_32(hw_apbh_ch9_debug2) + mxs_reg_32(hw_apbh_ch10_curcmdar) + mxs_reg_32(hw_apbh_ch10_nxtcmdar) + mxs_reg_32(hw_apbh_ch10_cmd) + mxs_reg_32(hw_apbh_ch10_bar) + mxs_reg_32(hw_apbh_ch10_sema) + mxs_reg_32(hw_apbh_ch10_debug1) + mxs_reg_32(hw_apbh_ch10_debug2) + mxs_reg_32(hw_apbh_ch11_curcmdar) + mxs_reg_32(hw_apbh_ch11_nxtcmdar) + mxs_reg_32(hw_apbh_ch11_cmd) + mxs_reg_32(hw_apbh_ch11_bar) + mxs_reg_32(hw_apbh_ch11_sema) + mxs_reg_32(hw_apbh_ch11_debug1) + mxs_reg_32(hw_apbh_ch11_debug2) + mxs_reg_32(hw_apbh_ch12_curcmdar) + mxs_reg_32(hw_apbh_ch12_nxtcmdar) + mxs_reg_32(hw_apbh_ch12_cmd) + mxs_reg_32(hw_apbh_ch12_bar) + mxs_reg_32(hw_apbh_ch12_sema) + mxs_reg_32(hw_apbh_ch12_debug1) + mxs_reg_32(hw_apbh_ch12_debug2) + mxs_reg_32(hw_apbh_ch13_curcmdar) + mxs_reg_32(hw_apbh_ch13_nxtcmdar) + mxs_reg_32(hw_apbh_ch13_cmd) + mxs_reg_32(hw_apbh_ch13_bar) + mxs_reg_32(hw_apbh_ch13_sema) + mxs_reg_32(hw_apbh_ch13_debug1) + mxs_reg_32(hw_apbh_ch13_debug2) + mxs_reg_32(hw_apbh_ch14_curcmdar) + mxs_reg_32(hw_apbh_ch14_nxtcmdar) + mxs_reg_32(hw_apbh_ch14_cmd) + mxs_reg_32(hw_apbh_ch14_bar) + mxs_reg_32(hw_apbh_ch14_sema) + mxs_reg_32(hw_apbh_ch14_debug1) + mxs_reg_32(hw_apbh_ch14_debug2) + mxs_reg_32(hw_apbh_ch15_curcmdar) + mxs_reg_32(hw_apbh_ch15_nxtcmdar) + mxs_reg_32(hw_apbh_ch15_cmd) + mxs_reg_32(hw_apbh_ch15_bar) + mxs_reg_32(hw_apbh_ch15_sema) + mxs_reg_32(hw_apbh_ch15_debug1) + mxs_reg_32(hw_apbh_ch15_debug2) }; }; - mx28_reg_32(hw_apbh_version) + mxs_reg_32(hw_apbh_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-base.h b/arch/arm/include/asm/arch-mxs/regs-base.h index dbdcc2b5bd..dbdcc2b5bd 100644 --- a/arch/arm/include/asm/arch-mx28/regs-base.h +++ b/arch/arm/include/asm/arch-mxs/regs-base.h diff --git a/arch/arm/include/asm/arch-mx28/regs-bch.h b/arch/arm/include/asm/arch-mxs/regs-bch.h index 9243bdd1c0..40baa4d1f9 100644 --- a/arch/arm/include/asm/arch-mx28/regs-bch.h +++ b/arch/arm/include/asm/arch-mxs/regs-bch.h @@ -29,31 +29,31 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_bch_regs { - mx28_reg_32(hw_bch_ctrl) - mx28_reg_32(hw_bch_status0) - mx28_reg_32(hw_bch_mode) - mx28_reg_32(hw_bch_encodeptr) - mx28_reg_32(hw_bch_dataptr) - mx28_reg_32(hw_bch_metaptr) +struct mxs_bch_regs { + mxs_reg_32(hw_bch_ctrl) + mxs_reg_32(hw_bch_status0) + mxs_reg_32(hw_bch_mode) + mxs_reg_32(hw_bch_encodeptr) + mxs_reg_32(hw_bch_dataptr) + mxs_reg_32(hw_bch_metaptr) uint32_t reserved[4]; - mx28_reg_32(hw_bch_layoutselect) - mx28_reg_32(hw_bch_flash0layout0) - mx28_reg_32(hw_bch_flash0layout1) - mx28_reg_32(hw_bch_flash1layout0) - mx28_reg_32(hw_bch_flash1layout1) - mx28_reg_32(hw_bch_flash2layout0) - mx28_reg_32(hw_bch_flash2layout1) - mx28_reg_32(hw_bch_flash3layout0) - mx28_reg_32(hw_bch_flash3layout1) - mx28_reg_32(hw_bch_dbgkesread) - mx28_reg_32(hw_bch_dbgcsferead) - mx28_reg_32(hw_bch_dbgsyndegread) - mx28_reg_32(hw_bch_dbgahbmread) - mx28_reg_32(hw_bch_blockname) - mx28_reg_32(hw_bch_version) + mxs_reg_32(hw_bch_layoutselect) + mxs_reg_32(hw_bch_flash0layout0) + mxs_reg_32(hw_bch_flash0layout1) + mxs_reg_32(hw_bch_flash1layout0) + mxs_reg_32(hw_bch_flash1layout1) + mxs_reg_32(hw_bch_flash2layout0) + mxs_reg_32(hw_bch_flash2layout1) + mxs_reg_32(hw_bch_flash3layout0) + mxs_reg_32(hw_bch_flash3layout1) + mxs_reg_32(hw_bch_dbgkesread) + mxs_reg_32(hw_bch_dbgcsferead) + mxs_reg_32(hw_bch_dbgsyndegread) + mxs_reg_32(hw_bch_dbgahbmread) + mxs_reg_32(hw_bch_blockname) + mxs_reg_32(hw_bch_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h index 3c4947df26..b662fbe440 100644 --- a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h +++ b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h @@ -29,39 +29,39 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_clkctrl_regs { - mx28_reg_32(hw_clkctrl_pll0ctrl0) /* 0x00 */ - mx28_reg_32(hw_clkctrl_pll0ctrl1) /* 0x10 */ - mx28_reg_32(hw_clkctrl_pll1ctrl0) /* 0x20 */ - mx28_reg_32(hw_clkctrl_pll1ctrl1) /* 0x30 */ - mx28_reg_32(hw_clkctrl_pll2ctrl0) /* 0x40 */ - mx28_reg_32(hw_clkctrl_cpu) /* 0x50 */ - mx28_reg_32(hw_clkctrl_hbus) /* 0x60 */ - mx28_reg_32(hw_clkctrl_xbus) /* 0x70 */ - mx28_reg_32(hw_clkctrl_xtal) /* 0x80 */ - mx28_reg_32(hw_clkctrl_ssp0) /* 0x90 */ - mx28_reg_32(hw_clkctrl_ssp1) /* 0xa0 */ - mx28_reg_32(hw_clkctrl_ssp2) /* 0xb0 */ - mx28_reg_32(hw_clkctrl_ssp3) /* 0xc0 */ - mx28_reg_32(hw_clkctrl_gpmi) /* 0xd0 */ - mx28_reg_32(hw_clkctrl_spdif) /* 0xe0 */ - mx28_reg_32(hw_clkctrl_emi) /* 0xf0 */ - mx28_reg_32(hw_clkctrl_saif0) /* 0x100 */ - mx28_reg_32(hw_clkctrl_saif1) /* 0x110 */ - mx28_reg_32(hw_clkctrl_lcdif) /* 0x120 */ - mx28_reg_32(hw_clkctrl_etm) /* 0x130 */ - mx28_reg_32(hw_clkctrl_enet) /* 0x140 */ - mx28_reg_32(hw_clkctrl_hsadc) /* 0x150 */ - mx28_reg_32(hw_clkctrl_flexcan) /* 0x160 */ +struct mxs_clkctrl_regs { + mxs_reg_32(hw_clkctrl_pll0ctrl0) /* 0x00 */ + mxs_reg_32(hw_clkctrl_pll0ctrl1) /* 0x10 */ + mxs_reg_32(hw_clkctrl_pll1ctrl0) /* 0x20 */ + mxs_reg_32(hw_clkctrl_pll1ctrl1) /* 0x30 */ + mxs_reg_32(hw_clkctrl_pll2ctrl0) /* 0x40 */ + mxs_reg_32(hw_clkctrl_cpu) /* 0x50 */ + mxs_reg_32(hw_clkctrl_hbus) /* 0x60 */ + mxs_reg_32(hw_clkctrl_xbus) /* 0x70 */ + mxs_reg_32(hw_clkctrl_xtal) /* 0x80 */ + mxs_reg_32(hw_clkctrl_ssp0) /* 0x90 */ + mxs_reg_32(hw_clkctrl_ssp1) /* 0xa0 */ + mxs_reg_32(hw_clkctrl_ssp2) /* 0xb0 */ + mxs_reg_32(hw_clkctrl_ssp3) /* 0xc0 */ + mxs_reg_32(hw_clkctrl_gpmi) /* 0xd0 */ + mxs_reg_32(hw_clkctrl_spdif) /* 0xe0 */ + mxs_reg_32(hw_clkctrl_emi) /* 0xf0 */ + mxs_reg_32(hw_clkctrl_saif0) /* 0x100 */ + mxs_reg_32(hw_clkctrl_saif1) /* 0x110 */ + mxs_reg_32(hw_clkctrl_lcdif) /* 0x120 */ + mxs_reg_32(hw_clkctrl_etm) /* 0x130 */ + mxs_reg_32(hw_clkctrl_enet) /* 0x140 */ + mxs_reg_32(hw_clkctrl_hsadc) /* 0x150 */ + mxs_reg_32(hw_clkctrl_flexcan) /* 0x160 */ uint32_t reserved[16]; - mx28_reg_8(hw_clkctrl_frac0) /* 0x1b0 */ - mx28_reg_8(hw_clkctrl_frac1) /* 0x1c0 */ - mx28_reg_32(hw_clkctrl_clkseq) /* 0x1d0 */ - mx28_reg_32(hw_clkctrl_reset) /* 0x1e0 */ - mx28_reg_32(hw_clkctrl_status) /* 0x1f0 */ - mx28_reg_32(hw_clkctrl_version) /* 0x200 */ + mxs_reg_8(hw_clkctrl_frac0) /* 0x1b0 */ + mxs_reg_8(hw_clkctrl_frac1) /* 0x1c0 */ + mxs_reg_32(hw_clkctrl_clkseq) /* 0x1d0 */ + mxs_reg_32(hw_clkctrl_reset) /* 0x1e0 */ + mxs_reg_32(hw_clkctrl_status) /* 0x1f0 */ + mxs_reg_32(hw_clkctrl_version) /* 0x200 */ }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-common.h b/arch/arm/include/asm/arch-mxs/regs-common.h index d2e19538af..bcea419f99 100644 --- a/arch/arm/include/asm/arch-mx28/regs-common.h +++ b/arch/arm/include/asm/arch-mxs/regs-common.h @@ -1,5 +1,5 @@ /* - * Freescale i.MX28 Register Accessors + * Freescale i.MXS Register Accessors * * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> * on behalf of DENX Software Engineering GmbH @@ -20,11 +20,11 @@ * */ -#ifndef __MX28_REGS_COMMON_H__ -#define __MX28_REGS_COMMON_H__ +#ifndef __MXS_REGS_COMMON_H__ +#define __MXS_REGS_COMMON_H__ /* - * The i.MX28 has interesting feature when it comes to register access. There + * The i.MXS has interesting feature when it comes to register access. There * are four kinds of access to one particular register. Those are: * * 1) Common read/write access. To use this mode, just write to the address of @@ -47,36 +47,36 @@ * */ -#define __mx28_reg_8(name) \ +#define __mxs_reg_8(name) \ uint8_t name[4]; \ uint8_t name##_set[4]; \ uint8_t name##_clr[4]; \ uint8_t name##_tog[4]; \ -#define __mx28_reg_32(name) \ +#define __mxs_reg_32(name) \ uint32_t name; \ uint32_t name##_set; \ uint32_t name##_clr; \ uint32_t name##_tog; -struct mx28_register_8 { - __mx28_reg_8(reg) +struct mxs_register_8 { + __mxs_reg_8(reg) }; -struct mx28_register_32 { - __mx28_reg_32(reg) +struct mxs_register_32 { + __mxs_reg_32(reg) }; -#define mx28_reg_8(name) \ +#define mxs_reg_8(name) \ union { \ - struct { __mx28_reg_8(name) }; \ - struct mx28_register_8 name##_reg; \ + struct { __mxs_reg_8(name) }; \ + struct mxs_register_8 name##_reg; \ }; -#define mx28_reg_32(name) \ +#define mxs_reg_32(name) \ union { \ - struct { __mx28_reg_32(name) }; \ - struct mx28_register_32 name##_reg; \ + struct { __mxs_reg_32(name) }; \ + struct mxs_register_32 name##_reg; \ }; -#endif /* __MX28_REGS_COMMON_H__ */ +#endif /* __MXS_REGS_COMMON_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-digctl.h b/arch/arm/include/asm/arch-mxs/regs-digctl.h index 9a63594d04..e7cc4b45d5 100644 --- a/arch/arm/include/asm/arch-mx28/regs-digctl.h +++ b/arch/arm/include/asm/arch-mxs/regs-digctl.h @@ -25,17 +25,17 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_digctl_regs { - mx28_reg_32(hw_digctl_ctrl) /* 0x000 */ - mx28_reg_32(hw_digctl_status) /* 0x010 */ - mx28_reg_32(hw_digctl_hclkcount) /* 0x020 */ - mx28_reg_32(hw_digctl_ramctrl) /* 0x030 */ - mx28_reg_32(hw_digctl_emi_status) /* 0x040 */ - mx28_reg_32(hw_digctl_read_margin) /* 0x050 */ +struct mxs_digctl_regs { + mxs_reg_32(hw_digctl_ctrl) /* 0x000 */ + mxs_reg_32(hw_digctl_status) /* 0x010 */ + mxs_reg_32(hw_digctl_hclkcount) /* 0x020 */ + mxs_reg_32(hw_digctl_ramctrl) /* 0x030 */ + mxs_reg_32(hw_digctl_emi_status) /* 0x040 */ + mxs_reg_32(hw_digctl_read_margin) /* 0x050 */ uint32_t hw_digctl_writeonce; /* 0x060 */ uint32_t reserved_writeonce[3]; - mx28_reg_32(hw_digctl_bist_ctl) /* 0x070 */ - mx28_reg_32(hw_digctl_bist_status) /* 0x080 */ + mxs_reg_32(hw_digctl_bist_ctl) /* 0x070 */ + mxs_reg_32(hw_digctl_bist_status) /* 0x080 */ uint32_t hw_digctl_entropy; /* 0x090 */ uint32_t reserved_entropy[3]; uint32_t hw_digctl_entropy_latched; /* 0x0a0 */ @@ -43,7 +43,7 @@ struct mx28_digctl_regs { uint32_t reserved1[4]; - mx28_reg_32(hw_digctl_microseconds) /* 0x0c0 */ + mxs_reg_32(hw_digctl_microseconds) /* 0x0c0 */ uint32_t hw_digctl_dbgrd; /* 0x0d0 */ uint32_t reserved_hw_digctl_dbgrd[3]; uint32_t hw_digctl_dbg; /* 0x0e0 */ @@ -51,21 +51,21 @@ struct mx28_digctl_regs { uint32_t reserved2[4]; - mx28_reg_32(hw_digctl_usb_loopback) /* 0x100 */ - mx28_reg_32(hw_digctl_ocram_status0) /* 0x110 */ - mx28_reg_32(hw_digctl_ocram_status1) /* 0x120 */ - mx28_reg_32(hw_digctl_ocram_status2) /* 0x130 */ - mx28_reg_32(hw_digctl_ocram_status3) /* 0x140 */ - mx28_reg_32(hw_digctl_ocram_status4) /* 0x150 */ - mx28_reg_32(hw_digctl_ocram_status5) /* 0x160 */ - mx28_reg_32(hw_digctl_ocram_status6) /* 0x170 */ - mx28_reg_32(hw_digctl_ocram_status7) /* 0x180 */ - mx28_reg_32(hw_digctl_ocram_status8) /* 0x190 */ - mx28_reg_32(hw_digctl_ocram_status9) /* 0x1a0 */ - mx28_reg_32(hw_digctl_ocram_status10) /* 0x1b0 */ - mx28_reg_32(hw_digctl_ocram_status11) /* 0x1c0 */ - mx28_reg_32(hw_digctl_ocram_status12) /* 0x1d0 */ - mx28_reg_32(hw_digctl_ocram_status13) /* 0x1e0 */ + mxs_reg_32(hw_digctl_usb_loopback) /* 0x100 */ + mxs_reg_32(hw_digctl_ocram_status0) /* 0x110 */ + mxs_reg_32(hw_digctl_ocram_status1) /* 0x120 */ + mxs_reg_32(hw_digctl_ocram_status2) /* 0x130 */ + mxs_reg_32(hw_digctl_ocram_status3) /* 0x140 */ + mxs_reg_32(hw_digctl_ocram_status4) /* 0x150 */ + mxs_reg_32(hw_digctl_ocram_status5) /* 0x160 */ + mxs_reg_32(hw_digctl_ocram_status6) /* 0x170 */ + mxs_reg_32(hw_digctl_ocram_status7) /* 0x180 */ + mxs_reg_32(hw_digctl_ocram_status8) /* 0x190 */ + mxs_reg_32(hw_digctl_ocram_status9) /* 0x1a0 */ + mxs_reg_32(hw_digctl_ocram_status10) /* 0x1b0 */ + mxs_reg_32(hw_digctl_ocram_status11) /* 0x1c0 */ + mxs_reg_32(hw_digctl_ocram_status12) /* 0x1d0 */ + mxs_reg_32(hw_digctl_ocram_status13) /* 0x1e0 */ uint32_t reserved3[36]; @@ -75,7 +75,7 @@ struct mx28_digctl_regs { uint32_t reserved_hw_digctl_scratch1[3]; uint32_t hw_digctl_armcache; /* 0x2a0 */ uint32_t reserved_hw_digctl_armcache[3]; - mx28_reg_32(hw_digctl_debug_trap) /* 0x2b0 */ + mxs_reg_32(hw_digctl_debug_trap) /* 0x2b0 */ uint32_t hw_digctl_debug_trap_l0_addr_low; /* 0x2c0 */ uint32_t reserved_hw_digctl_debug_trap_l0_addr_low[3]; uint32_t hw_digctl_debug_trap_l0_addr_high; /* 0x2d0 */ @@ -152,4 +152,8 @@ struct mx28_digctl_regs { }; #endif +/* Product code identification */ +#define HW_DIGCTL_CHIPID_MASK (0xffff << 16) +#define HW_DIGCTL_CHIPID_MX28 (0x2800 << 16) + #endif /* __MX28_REGS_DIGCTL_H__ */ diff --git a/arch/arm/include/asm/arch-mx28/regs-gpmi.h b/arch/arm/include/asm/arch-mxs/regs-gpmi.h index 1b487f46c6..624d618560 100644 --- a/arch/arm/include/asm/arch-mx28/regs-gpmi.h +++ b/arch/arm/include/asm/arch-mxs/regs-gpmi.h @@ -29,23 +29,23 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_gpmi_regs { - mx28_reg_32(hw_gpmi_ctrl0) - mx28_reg_32(hw_gpmi_compare) - mx28_reg_32(hw_gpmi_eccctrl) - mx28_reg_32(hw_gpmi_ecccount) - mx28_reg_32(hw_gpmi_payload) - mx28_reg_32(hw_gpmi_auxiliary) - mx28_reg_32(hw_gpmi_ctrl1) - mx28_reg_32(hw_gpmi_timing0) - mx28_reg_32(hw_gpmi_timing1) +struct mxs_gpmi_regs { + mxs_reg_32(hw_gpmi_ctrl0) + mxs_reg_32(hw_gpmi_compare) + mxs_reg_32(hw_gpmi_eccctrl) + mxs_reg_32(hw_gpmi_ecccount) + mxs_reg_32(hw_gpmi_payload) + mxs_reg_32(hw_gpmi_auxiliary) + mxs_reg_32(hw_gpmi_ctrl1) + mxs_reg_32(hw_gpmi_timing0) + mxs_reg_32(hw_gpmi_timing1) uint32_t reserved[4]; - mx28_reg_32(hw_gpmi_data) - mx28_reg_32(hw_gpmi_stat) - mx28_reg_32(hw_gpmi_debug) - mx28_reg_32(hw_gpmi_version) + mxs_reg_32(hw_gpmi_data) + mxs_reg_32(hw_gpmi_stat) + mxs_reg_32(hw_gpmi_debug) + mxs_reg_32(hw_gpmi_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-i2c.h b/arch/arm/include/asm/arch-mxs/regs-i2c.h index 2e2e81453d..067cfd3947 100644 --- a/arch/arm/include/asm/arch-mx28/regs-i2c.h +++ b/arch/arm/include/asm/arch-mxs/regs-i2c.h @@ -26,21 +26,21 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_i2c_regs { - mx28_reg_32(hw_i2c_ctrl0) - mx28_reg_32(hw_i2c_timing0) - mx28_reg_32(hw_i2c_timing1) - mx28_reg_32(hw_i2c_timing2) - mx28_reg_32(hw_i2c_ctrl1) - mx28_reg_32(hw_i2c_stat) - mx28_reg_32(hw_i2c_queuectrl) - mx28_reg_32(hw_i2c_queuestat) - mx28_reg_32(hw_i2c_queuecmd) - mx28_reg_32(hw_i2c_queuedata) - mx28_reg_32(hw_i2c_data) - mx28_reg_32(hw_i2c_debug0) - mx28_reg_32(hw_i2c_debug1) - mx28_reg_32(hw_i2c_version) +struct mxs_i2c_regs { + mxs_reg_32(hw_i2c_ctrl0) + mxs_reg_32(hw_i2c_timing0) + mxs_reg_32(hw_i2c_timing1) + mxs_reg_32(hw_i2c_timing2) + mxs_reg_32(hw_i2c_ctrl1) + mxs_reg_32(hw_i2c_stat) + mxs_reg_32(hw_i2c_queuectrl) + mxs_reg_32(hw_i2c_queuestat) + mxs_reg_32(hw_i2c_queuecmd) + mxs_reg_32(hw_i2c_queuedata) + mxs_reg_32(hw_i2c_data) + mxs_reg_32(hw_i2c_debug0) + mxs_reg_32(hw_i2c_debug1) + mxs_reg_32(hw_i2c_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-lcdif.h b/arch/arm/include/asm/arch-mxs/regs-lcdif.h index cb47e41fdc..b90b2d437a 100644 --- a/arch/arm/include/asm/arch-mx28/regs-lcdif.h +++ b/arch/arm/include/asm/arch-mxs/regs-lcdif.h @@ -29,39 +29,39 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_lcdif_regs { - mx28_reg_32(hw_lcdif_ctrl) /* 0x00 */ - mx28_reg_32(hw_lcdif_ctrl1) /* 0x10 */ - mx28_reg_32(hw_lcdif_ctrl2) /* 0x20 */ - mx28_reg_32(hw_lcdif_transfer_count) /* 0x30 */ - mx28_reg_32(hw_lcdif_cur_buf) /* 0x40 */ - mx28_reg_32(hw_lcdif_next_buf) /* 0x50 */ - mx28_reg_32(hw_lcdif_timing) /* 0x60 */ - mx28_reg_32(hw_lcdif_vdctrl0) /* 0x70 */ - mx28_reg_32(hw_lcdif_vdctrl1) /* 0x80 */ - mx28_reg_32(hw_lcdif_vdctrl2) /* 0x90 */ - mx28_reg_32(hw_lcdif_vdctrl3) /* 0xa0 */ - mx28_reg_32(hw_lcdif_vdctrl4) /* 0xb0 */ - mx28_reg_32(hw_lcdif_dvictrl0) /* 0xc0 */ - mx28_reg_32(hw_lcdif_dvictrl1) /* 0xd0 */ - mx28_reg_32(hw_lcdif_dvictrl2) /* 0xe0 */ - mx28_reg_32(hw_lcdif_dvictrl3) /* 0xf0 */ - mx28_reg_32(hw_lcdif_dvictrl4) /* 0x100 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl0) /* 0x110 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl1) /* 0x120 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl2) /* 0x130 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl3) /* 0x140 */ - mx28_reg_32(hw_lcdif_csc_coeffctrl4) /* 0x150 */ - mx28_reg_32(hw_lcdif_csc_offset) /* 0x160 */ - mx28_reg_32(hw_lcdif_csc_limit) /* 0x170 */ - mx28_reg_32(hw_lcdif_data) /* 0x180 */ - mx28_reg_32(hw_lcdif_bm_error_stat) /* 0x190 */ - mx28_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ - mx28_reg_32(hw_lcdif_lcdif_stat) /* 0x1b0 */ - mx28_reg_32(hw_lcdif_version) /* 0x1c0 */ - mx28_reg_32(hw_lcdif_debug0) /* 0x1d0 */ - mx28_reg_32(hw_lcdif_debug1) /* 0x1e0 */ - mx28_reg_32(hw_lcdif_debug2) /* 0x1f0 */ +struct mxs_lcdif_regs { + mxs_reg_32(hw_lcdif_ctrl) /* 0x00 */ + mxs_reg_32(hw_lcdif_ctrl1) /* 0x10 */ + mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */ + mxs_reg_32(hw_lcdif_transfer_count) /* 0x30 */ + mxs_reg_32(hw_lcdif_cur_buf) /* 0x40 */ + mxs_reg_32(hw_lcdif_next_buf) /* 0x50 */ + mxs_reg_32(hw_lcdif_timing) /* 0x60 */ + mxs_reg_32(hw_lcdif_vdctrl0) /* 0x70 */ + mxs_reg_32(hw_lcdif_vdctrl1) /* 0x80 */ + mxs_reg_32(hw_lcdif_vdctrl2) /* 0x90 */ + mxs_reg_32(hw_lcdif_vdctrl3) /* 0xa0 */ + mxs_reg_32(hw_lcdif_vdctrl4) /* 0xb0 */ + mxs_reg_32(hw_lcdif_dvictrl0) /* 0xc0 */ + mxs_reg_32(hw_lcdif_dvictrl1) /* 0xd0 */ + mxs_reg_32(hw_lcdif_dvictrl2) /* 0xe0 */ + mxs_reg_32(hw_lcdif_dvictrl3) /* 0xf0 */ + mxs_reg_32(hw_lcdif_dvictrl4) /* 0x100 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl0) /* 0x110 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl1) /* 0x120 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl2) /* 0x130 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl3) /* 0x140 */ + mxs_reg_32(hw_lcdif_csc_coeffctrl4) /* 0x150 */ + mxs_reg_32(hw_lcdif_csc_offset) /* 0x160 */ + mxs_reg_32(hw_lcdif_csc_limit) /* 0x170 */ + mxs_reg_32(hw_lcdif_data) /* 0x180 */ + mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x190 */ + mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ + mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1b0 */ + mxs_reg_32(hw_lcdif_version) /* 0x1c0 */ + mxs_reg_32(hw_lcdif_debug0) /* 0x1d0 */ + mxs_reg_32(hw_lcdif_debug1) /* 0x1e0 */ + mxs_reg_32(hw_lcdif_debug2) /* 0x1f0 */ }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-lradc.h b/arch/arm/include/asm/arch-mxs/regs-lradc.h index 16e2bbf4cb..28d8382422 100644 --- a/arch/arm/include/asm/arch-mx28/regs-lradc.h +++ b/arch/arm/include/asm/arch-mxs/regs-lradc.h @@ -29,31 +29,31 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_lradc_regs { - mx28_reg_32(hw_lradc_ctrl0); - mx28_reg_32(hw_lradc_ctrl1); - mx28_reg_32(hw_lradc_ctrl2); - mx28_reg_32(hw_lradc_ctrl3); - mx28_reg_32(hw_lradc_status); - mx28_reg_32(hw_lradc_ch0); - mx28_reg_32(hw_lradc_ch1); - mx28_reg_32(hw_lradc_ch2); - mx28_reg_32(hw_lradc_ch3); - mx28_reg_32(hw_lradc_ch4); - mx28_reg_32(hw_lradc_ch5); - mx28_reg_32(hw_lradc_ch6); - mx28_reg_32(hw_lradc_ch7); - mx28_reg_32(hw_lradc_delay0); - mx28_reg_32(hw_lradc_delay1); - mx28_reg_32(hw_lradc_delay2); - mx28_reg_32(hw_lradc_delay3); - mx28_reg_32(hw_lradc_debug0); - mx28_reg_32(hw_lradc_debug1); - mx28_reg_32(hw_lradc_conversion); - mx28_reg_32(hw_lradc_ctrl4); - mx28_reg_32(hw_lradc_treshold0); - mx28_reg_32(hw_lradc_treshold1); - mx28_reg_32(hw_lradc_version); +struct mxs_lradc_regs { + mxs_reg_32(hw_lradc_ctrl0); + mxs_reg_32(hw_lradc_ctrl1); + mxs_reg_32(hw_lradc_ctrl2); + mxs_reg_32(hw_lradc_ctrl3); + mxs_reg_32(hw_lradc_status); + mxs_reg_32(hw_lradc_ch0); + mxs_reg_32(hw_lradc_ch1); + mxs_reg_32(hw_lradc_ch2); + mxs_reg_32(hw_lradc_ch3); + mxs_reg_32(hw_lradc_ch4); + mxs_reg_32(hw_lradc_ch5); + mxs_reg_32(hw_lradc_ch6); + mxs_reg_32(hw_lradc_ch7); + mxs_reg_32(hw_lradc_delay0); + mxs_reg_32(hw_lradc_delay1); + mxs_reg_32(hw_lradc_delay2); + mxs_reg_32(hw_lradc_delay3); + mxs_reg_32(hw_lradc_debug0); + mxs_reg_32(hw_lradc_debug1); + mxs_reg_32(hw_lradc_conversion); + mxs_reg_32(hw_lradc_ctrl4); + mxs_reg_32(hw_lradc_treshold0); + mxs_reg_32(hw_lradc_treshold1); + mxs_reg_32(hw_lradc_version); }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-ocotp.h b/arch/arm/include/asm/arch-mxs/regs-ocotp.h index 2738035519..3269892f99 100644 --- a/arch/arm/include/asm/arch-mx28/regs-ocotp.h +++ b/arch/arm/include/asm/arch-mxs/regs-ocotp.h @@ -29,50 +29,50 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_ocotp_regs { - mx28_reg_32(hw_ocotp_ctrl) /* 0x0 */ - mx28_reg_32(hw_ocotp_data) /* 0x10 */ - mx28_reg_32(hw_ocotp_cust0) /* 0x20 */ - mx28_reg_32(hw_ocotp_cust1) /* 0x30 */ - mx28_reg_32(hw_ocotp_cust2) /* 0x40 */ - mx28_reg_32(hw_ocotp_cust3) /* 0x50 */ - mx28_reg_32(hw_ocotp_crypto0) /* 0x60 */ - mx28_reg_32(hw_ocotp_crypto1) /* 0x70 */ - mx28_reg_32(hw_ocotp_crypto2) /* 0x80 */ - mx28_reg_32(hw_ocotp_crypto3) /* 0x90 */ - mx28_reg_32(hw_ocotp_hwcap0) /* 0xa0 */ - mx28_reg_32(hw_ocotp_hwcap1) /* 0xb0 */ - mx28_reg_32(hw_ocotp_hwcap2) /* 0xc0 */ - mx28_reg_32(hw_ocotp_hwcap3) /* 0xd0 */ - mx28_reg_32(hw_ocotp_hwcap4) /* 0xe0 */ - mx28_reg_32(hw_ocotp_hwcap5) /* 0xf0 */ - mx28_reg_32(hw_ocotp_swcap) /* 0x100 */ - mx28_reg_32(hw_ocotp_custcap) /* 0x110 */ - mx28_reg_32(hw_ocotp_lock) /* 0x120 */ - mx28_reg_32(hw_ocotp_ops0) /* 0x130 */ - mx28_reg_32(hw_ocotp_ops1) /* 0x140 */ - mx28_reg_32(hw_ocotp_ops2) /* 0x150 */ - mx28_reg_32(hw_ocotp_ops3) /* 0x160 */ - mx28_reg_32(hw_ocotp_un0) /* 0x170 */ - mx28_reg_32(hw_ocotp_un1) /* 0x180 */ - mx28_reg_32(hw_ocotp_un2) /* 0x190 */ - mx28_reg_32(hw_ocotp_rom0) /* 0x1a0 */ - mx28_reg_32(hw_ocotp_rom1) /* 0x1b0 */ - mx28_reg_32(hw_ocotp_rom2) /* 0x1c0 */ - mx28_reg_32(hw_ocotp_rom3) /* 0x1d0 */ - mx28_reg_32(hw_ocotp_rom4) /* 0x1e0 */ - mx28_reg_32(hw_ocotp_rom5) /* 0x1f0 */ - mx28_reg_32(hw_ocotp_rom6) /* 0x200 */ - mx28_reg_32(hw_ocotp_rom7) /* 0x210 */ - mx28_reg_32(hw_ocotp_srk0) /* 0x220 */ - mx28_reg_32(hw_ocotp_srk1) /* 0x230 */ - mx28_reg_32(hw_ocotp_srk2) /* 0x240 */ - mx28_reg_32(hw_ocotp_srk3) /* 0x250 */ - mx28_reg_32(hw_ocotp_srk4) /* 0x260 */ - mx28_reg_32(hw_ocotp_srk5) /* 0x270 */ - mx28_reg_32(hw_ocotp_srk6) /* 0x280 */ - mx28_reg_32(hw_ocotp_srk7) /* 0x290 */ - mx28_reg_32(hw_ocotp_version) /* 0x2a0 */ +struct mxs_ocotp_regs { + mxs_reg_32(hw_ocotp_ctrl) /* 0x0 */ + mxs_reg_32(hw_ocotp_data) /* 0x10 */ + mxs_reg_32(hw_ocotp_cust0) /* 0x20 */ + mxs_reg_32(hw_ocotp_cust1) /* 0x30 */ + mxs_reg_32(hw_ocotp_cust2) /* 0x40 */ + mxs_reg_32(hw_ocotp_cust3) /* 0x50 */ + mxs_reg_32(hw_ocotp_crypto0) /* 0x60 */ + mxs_reg_32(hw_ocotp_crypto1) /* 0x70 */ + mxs_reg_32(hw_ocotp_crypto2) /* 0x80 */ + mxs_reg_32(hw_ocotp_crypto3) /* 0x90 */ + mxs_reg_32(hw_ocotp_hwcap0) /* 0xa0 */ + mxs_reg_32(hw_ocotp_hwcap1) /* 0xb0 */ + mxs_reg_32(hw_ocotp_hwcap2) /* 0xc0 */ + mxs_reg_32(hw_ocotp_hwcap3) /* 0xd0 */ + mxs_reg_32(hw_ocotp_hwcap4) /* 0xe0 */ + mxs_reg_32(hw_ocotp_hwcap5) /* 0xf0 */ + mxs_reg_32(hw_ocotp_swcap) /* 0x100 */ + mxs_reg_32(hw_ocotp_custcap) /* 0x110 */ + mxs_reg_32(hw_ocotp_lock) /* 0x120 */ + mxs_reg_32(hw_ocotp_ops0) /* 0x130 */ + mxs_reg_32(hw_ocotp_ops1) /* 0x140 */ + mxs_reg_32(hw_ocotp_ops2) /* 0x150 */ + mxs_reg_32(hw_ocotp_ops3) /* 0x160 */ + mxs_reg_32(hw_ocotp_un0) /* 0x170 */ + mxs_reg_32(hw_ocotp_un1) /* 0x180 */ + mxs_reg_32(hw_ocotp_un2) /* 0x190 */ + mxs_reg_32(hw_ocotp_rom0) /* 0x1a0 */ + mxs_reg_32(hw_ocotp_rom1) /* 0x1b0 */ + mxs_reg_32(hw_ocotp_rom2) /* 0x1c0 */ + mxs_reg_32(hw_ocotp_rom3) /* 0x1d0 */ + mxs_reg_32(hw_ocotp_rom4) /* 0x1e0 */ + mxs_reg_32(hw_ocotp_rom5) /* 0x1f0 */ + mxs_reg_32(hw_ocotp_rom6) /* 0x200 */ + mxs_reg_32(hw_ocotp_rom7) /* 0x210 */ + mxs_reg_32(hw_ocotp_srk0) /* 0x220 */ + mxs_reg_32(hw_ocotp_srk1) /* 0x230 */ + mxs_reg_32(hw_ocotp_srk2) /* 0x240 */ + mxs_reg_32(hw_ocotp_srk3) /* 0x250 */ + mxs_reg_32(hw_ocotp_srk4) /* 0x260 */ + mxs_reg_32(hw_ocotp_srk5) /* 0x270 */ + mxs_reg_32(hw_ocotp_srk6) /* 0x280 */ + mxs_reg_32(hw_ocotp_srk7) /* 0x290 */ + mxs_reg_32(hw_ocotp_version) /* 0x2a0 */ }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-pinctrl.h b/arch/arm/include/asm/arch-mxs/regs-pinctrl.h index 80dcdf6619..d5841709c4 100644 --- a/arch/arm/include/asm/arch-mx28/regs-pinctrl.h +++ b/arch/arm/include/asm/arch-mxs/regs-pinctrl.h @@ -29,130 +29,130 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_pinctrl_regs { - mx28_reg_32(hw_pinctrl_ctrl) /* 0x0 */ +struct mxs_pinctrl_regs { + mxs_reg_32(hw_pinctrl_ctrl) /* 0x0 */ uint32_t reserved1[60]; - mx28_reg_32(hw_pinctrl_muxsel0) /* 0x100 */ - mx28_reg_32(hw_pinctrl_muxsel1) /* 0x110 */ - mx28_reg_32(hw_pinctrl_muxsel2) /* 0x120 */ - mx28_reg_32(hw_pinctrl_muxsel3) /* 0x130 */ - mx28_reg_32(hw_pinctrl_muxsel4) /* 0x140 */ - mx28_reg_32(hw_pinctrl_muxsel5) /* 0x150 */ - mx28_reg_32(hw_pinctrl_muxsel6) /* 0x160 */ - mx28_reg_32(hw_pinctrl_muxsel7) /* 0x170 */ - mx28_reg_32(hw_pinctrl_muxsel8) /* 0x180 */ - mx28_reg_32(hw_pinctrl_muxsel9) /* 0x190 */ - mx28_reg_32(hw_pinctrl_muxsel10) /* 0x1a0 */ - mx28_reg_32(hw_pinctrl_muxsel11) /* 0x1b0 */ - mx28_reg_32(hw_pinctrl_muxsel12) /* 0x1c0 */ - mx28_reg_32(hw_pinctrl_muxsel13) /* 0x1d0 */ + mxs_reg_32(hw_pinctrl_muxsel0) /* 0x100 */ + mxs_reg_32(hw_pinctrl_muxsel1) /* 0x110 */ + mxs_reg_32(hw_pinctrl_muxsel2) /* 0x120 */ + mxs_reg_32(hw_pinctrl_muxsel3) /* 0x130 */ + mxs_reg_32(hw_pinctrl_muxsel4) /* 0x140 */ + mxs_reg_32(hw_pinctrl_muxsel5) /* 0x150 */ + mxs_reg_32(hw_pinctrl_muxsel6) /* 0x160 */ + mxs_reg_32(hw_pinctrl_muxsel7) /* 0x170 */ + mxs_reg_32(hw_pinctrl_muxsel8) /* 0x180 */ + mxs_reg_32(hw_pinctrl_muxsel9) /* 0x190 */ + mxs_reg_32(hw_pinctrl_muxsel10) /* 0x1a0 */ + mxs_reg_32(hw_pinctrl_muxsel11) /* 0x1b0 */ + mxs_reg_32(hw_pinctrl_muxsel12) /* 0x1c0 */ + mxs_reg_32(hw_pinctrl_muxsel13) /* 0x1d0 */ uint32_t reserved2[72]; - mx28_reg_32(hw_pinctrl_drive0) /* 0x300 */ - mx28_reg_32(hw_pinctrl_drive1) /* 0x310 */ - mx28_reg_32(hw_pinctrl_drive2) /* 0x320 */ - mx28_reg_32(hw_pinctrl_drive3) /* 0x330 */ - mx28_reg_32(hw_pinctrl_drive4) /* 0x340 */ - mx28_reg_32(hw_pinctrl_drive5) /* 0x350 */ - mx28_reg_32(hw_pinctrl_drive6) /* 0x360 */ - mx28_reg_32(hw_pinctrl_drive7) /* 0x370 */ - mx28_reg_32(hw_pinctrl_drive8) /* 0x380 */ - mx28_reg_32(hw_pinctrl_drive9) /* 0x390 */ - mx28_reg_32(hw_pinctrl_drive10) /* 0x3a0 */ - mx28_reg_32(hw_pinctrl_drive11) /* 0x3b0 */ - mx28_reg_32(hw_pinctrl_drive12) /* 0x3c0 */ - mx28_reg_32(hw_pinctrl_drive13) /* 0x3d0 */ - mx28_reg_32(hw_pinctrl_drive14) /* 0x3e0 */ - mx28_reg_32(hw_pinctrl_drive15) /* 0x3f0 */ - mx28_reg_32(hw_pinctrl_drive16) /* 0x400 */ - mx28_reg_32(hw_pinctrl_drive17) /* 0x410 */ - mx28_reg_32(hw_pinctrl_drive18) /* 0x420 */ - mx28_reg_32(hw_pinctrl_drive19) /* 0x430 */ + mxs_reg_32(hw_pinctrl_drive0) /* 0x300 */ + mxs_reg_32(hw_pinctrl_drive1) /* 0x310 */ + mxs_reg_32(hw_pinctrl_drive2) /* 0x320 */ + mxs_reg_32(hw_pinctrl_drive3) /* 0x330 */ + mxs_reg_32(hw_pinctrl_drive4) /* 0x340 */ + mxs_reg_32(hw_pinctrl_drive5) /* 0x350 */ + mxs_reg_32(hw_pinctrl_drive6) /* 0x360 */ + mxs_reg_32(hw_pinctrl_drive7) /* 0x370 */ + mxs_reg_32(hw_pinctrl_drive8) /* 0x380 */ + mxs_reg_32(hw_pinctrl_drive9) /* 0x390 */ + mxs_reg_32(hw_pinctrl_drive10) /* 0x3a0 */ + mxs_reg_32(hw_pinctrl_drive11) /* 0x3b0 */ + mxs_reg_32(hw_pinctrl_drive12) /* 0x3c0 */ + mxs_reg_32(hw_pinctrl_drive13) /* 0x3d0 */ + mxs_reg_32(hw_pinctrl_drive14) /* 0x3e0 */ + mxs_reg_32(hw_pinctrl_drive15) /* 0x3f0 */ + mxs_reg_32(hw_pinctrl_drive16) /* 0x400 */ + mxs_reg_32(hw_pinctrl_drive17) /* 0x410 */ + mxs_reg_32(hw_pinctrl_drive18) /* 0x420 */ + mxs_reg_32(hw_pinctrl_drive19) /* 0x430 */ uint32_t reserved3[112]; - mx28_reg_32(hw_pinctrl_pull0) /* 0x600 */ - mx28_reg_32(hw_pinctrl_pull1) /* 0x610 */ - mx28_reg_32(hw_pinctrl_pull2) /* 0x620 */ - mx28_reg_32(hw_pinctrl_pull3) /* 0x630 */ - mx28_reg_32(hw_pinctrl_pull4) /* 0x640 */ - mx28_reg_32(hw_pinctrl_pull5) /* 0x650 */ - mx28_reg_32(hw_pinctrl_pull6) /* 0x660 */ + mxs_reg_32(hw_pinctrl_pull0) /* 0x600 */ + mxs_reg_32(hw_pinctrl_pull1) /* 0x610 */ + mxs_reg_32(hw_pinctrl_pull2) /* 0x620 */ + mxs_reg_32(hw_pinctrl_pull3) /* 0x630 */ + mxs_reg_32(hw_pinctrl_pull4) /* 0x640 */ + mxs_reg_32(hw_pinctrl_pull5) /* 0x650 */ + mxs_reg_32(hw_pinctrl_pull6) /* 0x660 */ uint32_t reserved4[36]; - mx28_reg_32(hw_pinctrl_dout0) /* 0x700 */ - mx28_reg_32(hw_pinctrl_dout1) /* 0x710 */ - mx28_reg_32(hw_pinctrl_dout2) /* 0x720 */ - mx28_reg_32(hw_pinctrl_dout3) /* 0x730 */ - mx28_reg_32(hw_pinctrl_dout4) /* 0x740 */ + mxs_reg_32(hw_pinctrl_dout0) /* 0x700 */ + mxs_reg_32(hw_pinctrl_dout1) /* 0x710 */ + mxs_reg_32(hw_pinctrl_dout2) /* 0x720 */ + mxs_reg_32(hw_pinctrl_dout3) /* 0x730 */ + mxs_reg_32(hw_pinctrl_dout4) /* 0x740 */ uint32_t reserved5[108]; - mx28_reg_32(hw_pinctrl_din0) /* 0x900 */ - mx28_reg_32(hw_pinctrl_din1) /* 0x910 */ - mx28_reg_32(hw_pinctrl_din2) /* 0x920 */ - mx28_reg_32(hw_pinctrl_din3) /* 0x930 */ - mx28_reg_32(hw_pinctrl_din4) /* 0x940 */ + mxs_reg_32(hw_pinctrl_din0) /* 0x900 */ + mxs_reg_32(hw_pinctrl_din1) /* 0x910 */ + mxs_reg_32(hw_pinctrl_din2) /* 0x920 */ + mxs_reg_32(hw_pinctrl_din3) /* 0x930 */ + mxs_reg_32(hw_pinctrl_din4) /* 0x940 */ uint32_t reserved6[108]; - mx28_reg_32(hw_pinctrl_doe0) /* 0xb00 */ - mx28_reg_32(hw_pinctrl_doe1) /* 0xb10 */ - mx28_reg_32(hw_pinctrl_doe2) /* 0xb20 */ - mx28_reg_32(hw_pinctrl_doe3) /* 0xb30 */ - mx28_reg_32(hw_pinctrl_doe4) /* 0xb40 */ + mxs_reg_32(hw_pinctrl_doe0) /* 0xb00 */ + mxs_reg_32(hw_pinctrl_doe1) /* 0xb10 */ + mxs_reg_32(hw_pinctrl_doe2) /* 0xb20 */ + mxs_reg_32(hw_pinctrl_doe3) /* 0xb30 */ + mxs_reg_32(hw_pinctrl_doe4) /* 0xb40 */ uint32_t reserved7[300]; - mx28_reg_32(hw_pinctrl_pin2irq0) /* 0x1000 */ - mx28_reg_32(hw_pinctrl_pin2irq1) /* 0x1010 */ - mx28_reg_32(hw_pinctrl_pin2irq2) /* 0x1020 */ - mx28_reg_32(hw_pinctrl_pin2irq3) /* 0x1030 */ - mx28_reg_32(hw_pinctrl_pin2irq4) /* 0x1040 */ + mxs_reg_32(hw_pinctrl_pin2irq0) /* 0x1000 */ + mxs_reg_32(hw_pinctrl_pin2irq1) /* 0x1010 */ + mxs_reg_32(hw_pinctrl_pin2irq2) /* 0x1020 */ + mxs_reg_32(hw_pinctrl_pin2irq3) /* 0x1030 */ + mxs_reg_32(hw_pinctrl_pin2irq4) /* 0x1040 */ uint32_t reserved8[44]; - mx28_reg_32(hw_pinctrl_irqen0) /* 0x1100 */ - mx28_reg_32(hw_pinctrl_irqen1) /* 0x1110 */ - mx28_reg_32(hw_pinctrl_irqen2) /* 0x1120 */ - mx28_reg_32(hw_pinctrl_irqen3) /* 0x1130 */ - mx28_reg_32(hw_pinctrl_irqen4) /* 0x1140 */ + mxs_reg_32(hw_pinctrl_irqen0) /* 0x1100 */ + mxs_reg_32(hw_pinctrl_irqen1) /* 0x1110 */ + mxs_reg_32(hw_pinctrl_irqen2) /* 0x1120 */ + mxs_reg_32(hw_pinctrl_irqen3) /* 0x1130 */ + mxs_reg_32(hw_pinctrl_irqen4) /* 0x1140 */ uint32_t reserved9[44]; - mx28_reg_32(hw_pinctrl_irqlevel0) /* 0x1200 */ - mx28_reg_32(hw_pinctrl_irqlevel1) /* 0x1210 */ - mx28_reg_32(hw_pinctrl_irqlevel2) /* 0x1220 */ - mx28_reg_32(hw_pinctrl_irqlevel3) /* 0x1230 */ - mx28_reg_32(hw_pinctrl_irqlevel4) /* 0x1240 */ + mxs_reg_32(hw_pinctrl_irqlevel0) /* 0x1200 */ + mxs_reg_32(hw_pinctrl_irqlevel1) /* 0x1210 */ + mxs_reg_32(hw_pinctrl_irqlevel2) /* 0x1220 */ + mxs_reg_32(hw_pinctrl_irqlevel3) /* 0x1230 */ + mxs_reg_32(hw_pinctrl_irqlevel4) /* 0x1240 */ uint32_t reserved10[44]; - mx28_reg_32(hw_pinctrl_irqpol0) /* 0x1300 */ - mx28_reg_32(hw_pinctrl_irqpol1) /* 0x1310 */ - mx28_reg_32(hw_pinctrl_irqpol2) /* 0x1320 */ - mx28_reg_32(hw_pinctrl_irqpol3) /* 0x1330 */ - mx28_reg_32(hw_pinctrl_irqpol4) /* 0x1340 */ + mxs_reg_32(hw_pinctrl_irqpol0) /* 0x1300 */ + mxs_reg_32(hw_pinctrl_irqpol1) /* 0x1310 */ + mxs_reg_32(hw_pinctrl_irqpol2) /* 0x1320 */ + mxs_reg_32(hw_pinctrl_irqpol3) /* 0x1330 */ + mxs_reg_32(hw_pinctrl_irqpol4) /* 0x1340 */ uint32_t reserved11[44]; - mx28_reg_32(hw_pinctrl_irqstat0) /* 0x1400 */ - mx28_reg_32(hw_pinctrl_irqstat1) /* 0x1410 */ - mx28_reg_32(hw_pinctrl_irqstat2) /* 0x1420 */ - mx28_reg_32(hw_pinctrl_irqstat3) /* 0x1430 */ - mx28_reg_32(hw_pinctrl_irqstat4) /* 0x1440 */ + mxs_reg_32(hw_pinctrl_irqstat0) /* 0x1400 */ + mxs_reg_32(hw_pinctrl_irqstat1) /* 0x1410 */ + mxs_reg_32(hw_pinctrl_irqstat2) /* 0x1420 */ + mxs_reg_32(hw_pinctrl_irqstat3) /* 0x1430 */ + mxs_reg_32(hw_pinctrl_irqstat4) /* 0x1440 */ uint32_t reserved12[380]; - mx28_reg_32(hw_pinctrl_emi_odt_ctrl) /* 0x1a40 */ + mxs_reg_32(hw_pinctrl_emi_odt_ctrl) /* 0x1a40 */ uint32_t reserved13[76]; - mx28_reg_32(hw_pinctrl_emi_ds_ctrl) /* 0x1b80 */ + mxs_reg_32(hw_pinctrl_emi_ds_ctrl) /* 0x1b80 */ }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-power.h b/arch/arm/include/asm/arch-mxs/regs-power.h index 8eadc6d552..a46a372682 100644 --- a/arch/arm/include/asm/arch-mx28/regs-power.h +++ b/arch/arm/include/asm/arch-mxs/regs-power.h @@ -25,11 +25,11 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_power_regs { - mx28_reg_32(hw_power_ctrl) - mx28_reg_32(hw_power_5vctrl) - mx28_reg_32(hw_power_minpwr) - mx28_reg_32(hw_power_charge) +struct mxs_power_regs { + mxs_reg_32(hw_power_ctrl) + mxs_reg_32(hw_power_5vctrl) + mxs_reg_32(hw_power_minpwr) + mxs_reg_32(hw_power_charge) uint32_t hw_power_vdddctrl; uint32_t reserved_vddd[3]; uint32_t hw_power_vddactrl; @@ -44,23 +44,23 @@ struct mx28_power_regs { uint32_t reserved_misc[3]; uint32_t hw_power_dclimits; uint32_t reserved_dclimits[3]; - mx28_reg_32(hw_power_loopctrl) + mxs_reg_32(hw_power_loopctrl) uint32_t hw_power_sts; uint32_t reserved_sts[3]; - mx28_reg_32(hw_power_speed) + mxs_reg_32(hw_power_speed) uint32_t hw_power_battmonitor; uint32_t reserved_battmonitor[3]; uint32_t reserved[4]; - mx28_reg_32(hw_power_reset) - mx28_reg_32(hw_power_debug) - mx28_reg_32(hw_power_thermal) - mx28_reg_32(hw_power_usb1ctrl) - mx28_reg_32(hw_power_special) - mx28_reg_32(hw_power_version) - mx28_reg_32(hw_power_anaclkctrl) - mx28_reg_32(hw_power_refctrl) + mxs_reg_32(hw_power_reset) + mxs_reg_32(hw_power_debug) + mxs_reg_32(hw_power_thermal) + mxs_reg_32(hw_power_usb1ctrl) + mxs_reg_32(hw_power_special) + mxs_reg_32(hw_power_version) + mxs_reg_32(hw_power_anaclkctrl) + mxs_reg_32(hw_power_refctrl) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-rtc.h b/arch/arm/include/asm/arch-mxs/regs-rtc.h index e605a03953..6b2dd332e3 100644 --- a/arch/arm/include/asm/arch-mx28/regs-rtc.h +++ b/arch/arm/include/asm/arch-mxs/regs-rtc.h @@ -26,21 +26,21 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_rtc_regs { - mx28_reg_32(hw_rtc_ctrl) - mx28_reg_32(hw_rtc_stat) - mx28_reg_32(hw_rtc_milliseconds) - mx28_reg_32(hw_rtc_seconds) - mx28_reg_32(hw_rtc_rtc_alarm) - mx28_reg_32(hw_rtc_watchdog) - mx28_reg_32(hw_rtc_persistent0) - mx28_reg_32(hw_rtc_persistent1) - mx28_reg_32(hw_rtc_persistent2) - mx28_reg_32(hw_rtc_persistent3) - mx28_reg_32(hw_rtc_persistent4) - mx28_reg_32(hw_rtc_persistent5) - mx28_reg_32(hw_rtc_debug) - mx28_reg_32(hw_rtc_version) +struct mxs_rtc_regs { + mxs_reg_32(hw_rtc_ctrl) + mxs_reg_32(hw_rtc_stat) + mxs_reg_32(hw_rtc_milliseconds) + mxs_reg_32(hw_rtc_seconds) + mxs_reg_32(hw_rtc_rtc_alarm) + mxs_reg_32(hw_rtc_watchdog) + mxs_reg_32(hw_rtc_persistent0) + mxs_reg_32(hw_rtc_persistent1) + mxs_reg_32(hw_rtc_persistent2) + mxs_reg_32(hw_rtc_persistent3) + mxs_reg_32(hw_rtc_persistent4) + mxs_reg_32(hw_rtc_persistent5) + mxs_reg_32(hw_rtc_debug) + mxs_reg_32(hw_rtc_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h index be71d48947..cf52a28c3b 100644 --- a/arch/arm/include/asm/arch-mx28/regs-ssp.h +++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h @@ -28,27 +28,27 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_ssp_regs { - mx28_reg_32(hw_ssp_ctrl0) - mx28_reg_32(hw_ssp_cmd0) - mx28_reg_32(hw_ssp_cmd1) - mx28_reg_32(hw_ssp_xfer_size) - mx28_reg_32(hw_ssp_block_size) - mx28_reg_32(hw_ssp_compref) - mx28_reg_32(hw_ssp_compmask) - mx28_reg_32(hw_ssp_timing) - mx28_reg_32(hw_ssp_ctrl1) - mx28_reg_32(hw_ssp_data) - mx28_reg_32(hw_ssp_sdresp0) - mx28_reg_32(hw_ssp_sdresp1) - mx28_reg_32(hw_ssp_sdresp2) - mx28_reg_32(hw_ssp_sdresp3) - mx28_reg_32(hw_ssp_ddr_ctrl) - mx28_reg_32(hw_ssp_dll_ctrl) - mx28_reg_32(hw_ssp_status) - mx28_reg_32(hw_ssp_dll_sts) - mx28_reg_32(hw_ssp_debug) - mx28_reg_32(hw_ssp_version) +struct mxs_ssp_regs { + mxs_reg_32(hw_ssp_ctrl0) + mxs_reg_32(hw_ssp_cmd0) + mxs_reg_32(hw_ssp_cmd1) + mxs_reg_32(hw_ssp_xfer_size) + mxs_reg_32(hw_ssp_block_size) + mxs_reg_32(hw_ssp_compref) + mxs_reg_32(hw_ssp_compmask) + mxs_reg_32(hw_ssp_timing) + mxs_reg_32(hw_ssp_ctrl1) + mxs_reg_32(hw_ssp_data) + mxs_reg_32(hw_ssp_sdresp0) + mxs_reg_32(hw_ssp_sdresp1) + mxs_reg_32(hw_ssp_sdresp2) + mxs_reg_32(hw_ssp_sdresp3) + mxs_reg_32(hw_ssp_ddr_ctrl) + mxs_reg_32(hw_ssp_dll_ctrl) + mxs_reg_32(hw_ssp_status) + mxs_reg_32(hw_ssp_dll_sts) + mxs_reg_32(hw_ssp_debug) + mxs_reg_32(hw_ssp_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h index 3e8dfe782f..529a3bcdd1 100644 --- a/arch/arm/include/asm/arch-mx28/regs-timrot.h +++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h @@ -28,26 +28,26 @@ #include <asm/arch/regs-common.h> #ifndef __ASSEMBLY__ -struct mx28_timrot_regs { - mx28_reg_32(hw_timrot_rotctrl) - mx28_reg_32(hw_timrot_rotcount) - mx28_reg_32(hw_timrot_timctrl0) - mx28_reg_32(hw_timrot_running_count0) - mx28_reg_32(hw_timrot_fixed_count0) - mx28_reg_32(hw_timrot_match_count0) - mx28_reg_32(hw_timrot_timctrl1) - mx28_reg_32(hw_timrot_running_count1) - mx28_reg_32(hw_timrot_fixed_count1) - mx28_reg_32(hw_timrot_match_count1) - mx28_reg_32(hw_timrot_timctrl2) - mx28_reg_32(hw_timrot_running_count2) - mx28_reg_32(hw_timrot_fixed_count2) - mx28_reg_32(hw_timrot_match_count2) - mx28_reg_32(hw_timrot_timctrl3) - mx28_reg_32(hw_timrot_running_count3) - mx28_reg_32(hw_timrot_fixed_count3) - mx28_reg_32(hw_timrot_match_count3) - mx28_reg_32(hw_timrot_version) +struct mxs_timrot_regs { + mxs_reg_32(hw_timrot_rotctrl) + mxs_reg_32(hw_timrot_rotcount) + mxs_reg_32(hw_timrot_timctrl0) + mxs_reg_32(hw_timrot_running_count0) + mxs_reg_32(hw_timrot_fixed_count0) + mxs_reg_32(hw_timrot_match_count0) + mxs_reg_32(hw_timrot_timctrl1) + mxs_reg_32(hw_timrot_running_count1) + mxs_reg_32(hw_timrot_fixed_count1) + mxs_reg_32(hw_timrot_match_count1) + mxs_reg_32(hw_timrot_timctrl2) + mxs_reg_32(hw_timrot_running_count2) + mxs_reg_32(hw_timrot_fixed_count2) + mxs_reg_32(hw_timrot_match_count2) + mxs_reg_32(hw_timrot_timctrl3) + mxs_reg_32(hw_timrot_running_count3) + mxs_reg_32(hw_timrot_fixed_count3) + mxs_reg_32(hw_timrot_match_count3) + mxs_reg_32(hw_timrot_version) }; #endif diff --git a/arch/arm/include/asm/arch-mx28/regs-usb.h b/arch/arm/include/asm/arch-mxs/regs-usb.h index ea61de80d8..d8bcd77d4d 100644 --- a/arch/arm/include/asm/arch-mx28/regs-usb.h +++ b/arch/arm/include/asm/arch-mxs/regs-usb.h @@ -23,7 +23,7 @@ #ifndef __REGS_USB_H__ #define __REGS_USB_H__ -struct mx28_usb_regs { +struct mxs_usb_regs { uint32_t hw_usbctrl_id; /* 0x000 */ uint32_t hw_usbctrl_hwgeneral; /* 0x004 */ uint32_t hw_usbctrl_hwhost; /* 0x008 */ diff --git a/arch/arm/include/asm/arch-mx28/regs-usbphy.h b/arch/arm/include/asm/arch-mxs/regs-usbphy.h index 0291d815c6..288e8fa6d0 100644 --- a/arch/arm/include/asm/arch-mx28/regs-usbphy.h +++ b/arch/arm/include/asm/arch-mxs/regs-usbphy.h @@ -23,17 +23,17 @@ #ifndef __REGS_USBPHY_H__ #define __REGS_USBPHY_H__ -struct mx28_usbphy_regs { - mx28_reg_32(hw_usbphy_pwd) - mx28_reg_32(hw_usbphy_tx) - mx28_reg_32(hw_usbphy_rx) - mx28_reg_32(hw_usbphy_ctrl) - mx28_reg_32(hw_usbphy_status) - mx28_reg_32(hw_usbphy_debug) - mx28_reg_32(hw_usbphy_debug0_status) - mx28_reg_32(hw_usbphy_debug1) - mx28_reg_32(hw_usbphy_version) - mx28_reg_32(hw_usbphy_ip) +struct mxs_usbphy_regs { + mxs_reg_32(hw_usbphy_pwd) + mxs_reg_32(hw_usbphy_tx) + mxs_reg_32(hw_usbphy_rx) + mxs_reg_32(hw_usbphy_ctrl) + mxs_reg_32(hw_usbphy_status) + mxs_reg_32(hw_usbphy_debug) + mxs_reg_32(hw_usbphy_debug0_status) + mxs_reg_32(hw_usbphy_debug1) + mxs_reg_32(hw_usbphy_version) + mxs_reg_32(hw_usbphy_ip) }; #define USBPHY_PWD_RXPWDRX (1 << 20) diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index e701c6409e..9bddc12d4d 100644 --- a/arch/arm/include/asm/arch-mx28/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -1,5 +1,5 @@ /* - * Freescale i.MX28 MX28 specific functions + * Freescale i.MX23/i.MX28 specific functions * * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> * on behalf of DENX Software Engineering GmbH @@ -20,32 +20,32 @@ * */ -#ifndef __MX28_H__ -#define __MX28_H__ +#ifndef __SYS_PROTO_H__ +#define __SYS_PROTO_H__ -int mx28_reset_block(struct mx28_register_32 *reg); -int mx28_wait_mask_set(struct mx28_register_32 *reg, +int mxs_reset_block(struct mxs_register_32 *reg); +int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, - int timeout); -int mx28_wait_mask_clr(struct mx28_register_32 *reg, + unsigned int timeout); +int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, - int timeout); + unsigned int timeout); int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)); #ifdef CONFIG_SPL_BUILD #include <asm/arch/iomux-mx28.h> -void mx28_common_spl_init(const iomux_cfg_t *iomux_setup, +void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, const unsigned int iomux_size); #endif -struct mx28_pair { +struct mxs_pair { uint8_t boot_pads; uint8_t boot_mask; const char *mode; }; -static const struct mx28_pair mx28_boot_modes[] = { +static const struct mxs_pair mxs_boot_modes[] = { { 0x00, 0x0f, "USB #0" }, { 0x01, 0x1f, "I2C #0, master, 3V3" }, { 0x11, 0x1f, "I2C #0, master, 1V8" }, @@ -64,11 +64,11 @@ static const struct mx28_pair mx28_boot_modes[] = { { 0x00, 0x00, "Reserved/Unknown/Wrong" }, }; -struct mx28_spl_data { +struct mxs_spl_data { uint8_t boot_mode_idx; uint32_t mem_dram_size; }; -int mx28_dram_init(void); +int mxs_dram_init(void); -#endif /* __MX28_H__ */ +#endif /* __SYS_PROTO_H__ */ diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 9f6992a121..12dcf4ed1e 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -294,6 +294,35 @@ enum { #define NUMONYX_RASWIDTH_165 15 #define NUMONYX_V_MCFG_165(size) MCFG((size), NUMONYX_RASWIDTH_165) +/* NUMONYX part of IGEP v2 (200MHz optimized) 5 ns */ +#define NUMONYX_TDAL_200 6 /* Twr/Tck + Trp/tck */ + /* 15/5 + 15/5 = 3 + 3 -> 6 */ +#define NUMONYX_TDPL_200 3 /* 15/5 = 3 -> 3 (Twr) */ +#define NUMONYX_TRRD_200 2 /* 10/5 = 2 */ +#define NUMONYX_TRCD_200 4 /* 16.2/5 = 3.24 -> 4 */ +#define NUMONYX_TRP_200 3 /* 15/5 = 3 */ +#define NUMONYX_TRAS_200 8 /* 40/5 = 8 */ +#define NUMONYX_TRC_200 11 /* 55/5 = 11 */ +#define NUMONYX_TRFC_200 28 /* 140/5 = 28 */ + +#define NUMONYX_V_ACTIMA_200 \ + ACTIM_CTRLA(NUMONYX_TRFC_200, NUMONYX_TRC_200, \ + NUMONYX_TRAS_200, NUMONYX_TRP_200, \ + NUMONYX_TRCD_200, NUMONYX_TRRD_200, \ + NUMONYX_TDPL_200, NUMONYX_TDAL_200) + +#define NUMONYX_TWTR_200 2 +#define NUMONYX_TCKE_200 2 +#define NUMONYX_TXP_200 3 +#define NUMONYX_XSR_200 40 + +#define NUMONYX_V_ACTIMB_200 \ + ACTIM_CTRLB(NUMONYX_TWTR_200, NUMONYX_TCKE_200, \ + NUMONYX_TXP_200, NUMONYX_XSR_200) + +#define NUMONYX_RASWIDTH_200 15 +#define NUMONYX_V_MCFG_200(size) MCFG((size), NUMONYX_RASWIDTH_200) + /* * GPMC settings - * Definitions is as per the following format diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 03bd923145..d4b5076108 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -172,7 +172,6 @@ struct control_lpddr2io_regs { /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000 /* Temporary SRAM stack used while low level init is done */ -#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END #define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START /* SRAM scratch space entries */ #define OMAP4_SRAM_SCRATCH_OMAP4_REV SRAM_SCRATCH_SPACE_ADDR diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 7f05cb5b4a..9dce49ac4b 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -262,8 +262,6 @@ struct omap_sys_ctrl_regs { #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 -/* Temporary SRAM stack used while low level init is done */ -#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END #define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START /* diff --git a/arch/arm/include/asm/arch-tegra2/ap20.h b/arch/arm/include/asm/arch-tegra20/ap20.h index d222c44233..c84d22f97b 100644 --- a/arch/arm/include/asm/arch-tegra2/ap20.h +++ b/arch/arm/include/asm/arch-tegra20/ap20.h @@ -95,8 +95,8 @@ #define HALT_COP_EVENT_IRQ_1 (1 << 11) #define HALT_COP_EVENT_FIQ_1 (1 << 9) -/* Start up the tegra2 SOC */ -void tegra2_start(void); +/* Start up the tegra20 SOC */ +void tegra20_start(void); /* This is the main entry into U-Boot, used by the Cortex-A9 */ extern void _start(void); diff --git a/arch/arm/include/asm/arch-tegra2/apb_misc.h b/arch/arm/include/asm/arch-tegra20/apb_misc.h index eb69d18d01..eb69d18d01 100644 --- a/arch/arm/include/asm/arch-tegra2/apb_misc.h +++ b/arch/arm/include/asm/arch-tegra20/apb_misc.h diff --git a/arch/arm/include/asm/arch-tegra2/board.h b/arch/arm/include/asm/arch-tegra20/board.h index a90d36c708..a90d36c708 100644 --- a/arch/arm/include/asm/arch-tegra2/board.h +++ b/arch/arm/include/asm/arch-tegra20/board.h diff --git a/arch/arm/include/asm/arch-tegra2/clk_rst.h b/arch/arm/include/asm/arch-tegra20/clk_rst.h index 8c3be91514..8c3be91514 100644 --- a/arch/arm/include/asm/arch-tegra2/clk_rst.h +++ b/arch/arm/include/asm/arch-tegra20/clk_rst.h diff --git a/arch/arm/include/asm/arch-tegra2/clock.h b/arch/arm/include/asm/arch-tegra20/clock.h index ff83bbf293..ff83bbf293 100644 --- a/arch/arm/include/asm/arch-tegra2/clock.h +++ b/arch/arm/include/asm/arch-tegra20/clock.h diff --git a/arch/arm/include/asm/arch-tegra2/emc.h b/arch/arm/include/asm/arch-tegra20/emc.h index deb3d36ed2..deb3d36ed2 100644 --- a/arch/arm/include/asm/arch-tegra2/emc.h +++ b/arch/arm/include/asm/arch-tegra20/emc.h diff --git a/arch/arm/include/asm/arch-tegra2/flow.h b/arch/arm/include/asm/arch-tegra20/flow.h index cce6cbf7d0..cce6cbf7d0 100644 --- a/arch/arm/include/asm/arch-tegra2/flow.h +++ b/arch/arm/include/asm/arch-tegra20/flow.h diff --git a/arch/arm/include/asm/arch-tegra2/funcmux.h b/arch/arm/include/asm/arch-tegra20/funcmux.h index dcd512f084..258f7b641a 100644 --- a/arch/arm/include/asm/arch-tegra2/funcmux.h +++ b/arch/arm/include/asm/arch-tegra20/funcmux.h @@ -19,7 +19,7 @@ * MA 02111-1307 USA */ -/* Tegra2 high-level function multiplexing */ +/* Tegra20 high-level function multiplexing */ #ifndef __FUNCMUX_H #define __FUNCMUX_H diff --git a/arch/arm/include/asm/arch-tegra2/fuse.h b/arch/arm/include/asm/arch-tegra20/fuse.h index b7e3808a4f..b7e3808a4f 100644 --- a/arch/arm/include/asm/arch-tegra2/fuse.h +++ b/arch/arm/include/asm/arch-tegra20/fuse.h diff --git a/arch/arm/include/asm/arch-tegra2/gp_padctrl.h b/arch/arm/include/asm/arch-tegra20/gp_padctrl.h index 1755ab2eaa..865af5bc79 100644 --- a/arch/arm/include/asm/arch-tegra2/gp_padctrl.h +++ b/arch/arm/include/asm/arch-tegra20/gp_padctrl.h @@ -68,6 +68,6 @@ struct apb_misc_gp_ctlr { #define HIDREV_MAJORPREV_MASK (0xf << HIDREV_MAJORPREV_SHIFT) /* CHIPID field returned from APB_MISC_GP_HIDREV register */ -#define CHIPID_TEGRA2 0x20 +#define CHIPID_TEGRA20 0x20 #endif diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h b/arch/arm/include/asm/arch-tegra20/gpio.h index 40ddb02565..06be4c28be 100644 --- a/arch/arm/include/asm/arch-tegra2/gpio.h +++ b/arch/arm/include/asm/arch-tegra20/gpio.h @@ -281,7 +281,7 @@ enum gpio_pin { }; /* - * Tegra2-specific GPIO API + * Tegra20-specific GPIO API */ void gpio_info(void); diff --git a/arch/arm/include/asm/arch-tegra20/hardware.h b/arch/arm/include/asm/arch-tegra20/hardware.h new file mode 100644 index 0000000000..8c47578338 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/hardware.h @@ -0,0 +1,29 @@ +/* +* (C) Copyright 2010-2011 +* NVIDIA Corporation <www.nvidia.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __TEGRA2_HW_H +#define __TEGRA2_HW_H + +/* include tegra specific hardware definitions */ + +#endif /* __TEGRA2_HW_H */ diff --git a/arch/arm/include/asm/arch-tegra2/mmc.h b/arch/arm/include/asm/arch-tegra20/mmc.h index c1f12dbe49..916a353a97 100644 --- a/arch/arm/include/asm/arch-tegra2/mmc.h +++ b/arch/arm/include/asm/arch-tegra20/mmc.h @@ -19,9 +19,9 @@ * MA 02111-1307 USA */ -#ifndef _TEGRA2_MMC_H_ -#define _TEGRA2_MMC_H_ +#ifndef _TEGRA20_MMC_H_ +#define _TEGRA20_MMC_H_ -int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio); +int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio); -#endif /* TEGRA2_MMC_H_ */ +#endif /* TEGRA20_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra2/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h index 03fa7ca643..03fa7ca643 100644 --- a/arch/arm/include/asm/arch-tegra2/pinmux.h +++ b/arch/arm/include/asm/arch-tegra20/pinmux.h diff --git a/arch/arm/include/asm/arch-tegra2/pmc.h b/arch/arm/include/asm/arch-tegra20/pmc.h index b1d47cd2e3..b1d47cd2e3 100644 --- a/arch/arm/include/asm/arch-tegra2/pmc.h +++ b/arch/arm/include/asm/arch-tegra20/pmc.h diff --git a/arch/arm/include/asm/arch-tegra2/pmu.h b/arch/arm/include/asm/arch-tegra20/pmu.h index 390815fc24..390815fc24 100644 --- a/arch/arm/include/asm/arch-tegra2/pmu.h +++ b/arch/arm/include/asm/arch-tegra20/pmu.h diff --git a/arch/arm/include/asm/arch-tegra2/scu.h b/arch/arm/include/asm/arch-tegra20/scu.h index 787ded0fe0..787ded0fe0 100644 --- a/arch/arm/include/asm/arch-tegra2/scu.h +++ b/arch/arm/include/asm/arch-tegra20/scu.h diff --git a/arch/arm/include/asm/arch-tegra2/sdram_param.h b/arch/arm/include/asm/arch-tegra20/sdram_param.h index 6c427d0841..6c427d0841 100644 --- a/arch/arm/include/asm/arch-tegra2/sdram_param.h +++ b/arch/arm/include/asm/arch-tegra20/sdram_param.h diff --git a/arch/arm/include/asm/arch-tegra2/sys_proto.h b/arch/arm/include/asm/arch-tegra20/sys_proto.h index c11534e585..643d5424b8 100644 --- a/arch/arm/include/asm/arch-tegra2/sys_proto.h +++ b/arch/arm/include/asm/arch-tegra20/sys_proto.h @@ -24,12 +24,12 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -struct tegra2_sysinfo { +struct tegra20_sysinfo { char *board_string; }; void invalidate_dcache(void); -extern const struct tegra2_sysinfo sysinfo; +extern const struct tegra20_sysinfo sysinfo; #endif diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h b/arch/arm/include/asm/arch-tegra20/tegra20.h index 13d68c017c..6750754bae 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra2.h +++ b/arch/arm/include/asm/arch-tegra20/tegra20.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef _TEGRA2_H_ -#define _TEGRA2_H_ +#ifndef _TEGRA20_H_ +#define _TEGRA20_H_ #define NV_PA_SDRAM_BASE 0x00000000 #define NV_PA_ARM_PERIPHBASE 0x50040000 @@ -33,21 +33,21 @@ #define NV_PA_GPIO_BASE 0x6000D000 #define NV_PA_EVP_BASE 0x6000F000 #define NV_PA_APB_MISC_BASE 0x70000000 -#define TEGRA2_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800) +#define TEGRA20_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800) #define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000) #define NV_PA_APB_UARTB_BASE (NV_PA_APB_MISC_BASE + 0x6040) #define NV_PA_APB_UARTC_BASE (NV_PA_APB_MISC_BASE + 0x6200) #define NV_PA_APB_UARTD_BASE (NV_PA_APB_MISC_BASE + 0x6300) #define NV_PA_APB_UARTE_BASE (NV_PA_APB_MISC_BASE + 0x6400) -#define TEGRA2_SPI_BASE (NV_PA_APB_MISC_BASE + 0xC380) -#define TEGRA2_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400) -#define TEGRA2_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800) +#define TEGRA20_SPI_BASE (NV_PA_APB_MISC_BASE + 0xC380) +#define TEGRA20_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400) +#define TEGRA20_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800) #define NV_PA_CSITE_BASE 0x70040000 #define TEGRA_USB1_BASE 0xC5000000 #define TEGRA_USB3_BASE 0xC5008000 #define TEGRA_USB_ADDR_MASK 0xFFFFC000 -#define TEGRA2_SDRC_CS0 NV_PA_SDRAM_BASE +#define TEGRA20_SDRC_CS0 NV_PA_SDRAM_BASE #define LOW_LEVEL_SRAM_STACK 0x4000FFFC #define EARLY_AVP_STACK (NV_PA_SDRAM_BASE + 0x20000) #define EARLY_CPU_STACK (EARLY_AVP_STACK - 4096) @@ -85,7 +85,7 @@ enum { }; #else /* __ASSEMBLY__ */ -#define PRM_RSTCTRL TEGRA2_PMC_BASE +#define PRM_RSTCTRL TEGRA20_PMC_BASE #endif -#endif /* TEGRA2_H */ +#endif /* TEGRA20_H */ diff --git a/arch/arm/include/asm/arch-tegra2/tegra_i2c.h b/arch/arm/include/asm/arch-tegra20/tegra_i2c.h index cfb136c466..6abfe4e80b 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra_i2c.h +++ b/arch/arm/include/asm/arch-tegra20/tegra_i2c.h @@ -1,5 +1,5 @@ /* - * NVIDIA Tegra2 I2C controller + * NVIDIA Tegra20 I2C controller * * Copyright 2010-2011 NVIDIA Corporation * diff --git a/arch/arm/include/asm/arch-tegra2/tegra_spi.h b/arch/arm/include/asm/arch-tegra20/tegra_spi.h index 892d90c00b..8978beacc5 100644 --- a/arch/arm/include/asm/arch-tegra2/tegra_spi.h +++ b/arch/arm/include/asm/arch-tegra20/tegra_spi.h @@ -1,5 +1,5 @@ /* - * NVIDIA Tegra2 SPI-FLASH controller + * NVIDIA Tegra20 SPI-FLASH controller * * Copyright 2010-2012 NVIDIA Corporation * @@ -70,6 +70,6 @@ struct spi_tegra { #define SPI_STAT_CUR_BLKCNT (1 << 15) #define SPI_TIMEOUT 1000 -#define TEGRA2_SPI_MAX_FREQ 52000000 +#define TEGRA20_SPI_MAX_FREQ 52000000 #endif /* _TEGRA_SPI_H_ */ diff --git a/arch/arm/include/asm/arch-tegra2/timer.h b/arch/arm/include/asm/arch-tegra20/timer.h index adefa2c6c1..43f7ab4efa 100644 --- a/arch/arm/include/asm/arch-tegra2/timer.h +++ b/arch/arm/include/asm/arch-tegra20/timer.h @@ -19,10 +19,10 @@ * MA 02111-1307 USA */ -/* Tegra2 timer functions */ +/* Tegra20 timer functions */ -#ifndef _TEGRA2_TIMER_H -#define _TEGRA2_TIMER_H +#ifndef _TEGRA20_TIMER_H +#define _TEGRA20_TIMER_H /* returns the current monotonic timer value in microseconds */ unsigned long timer_get_us(void); diff --git a/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h b/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h index 82ac180acd..82ac180acd 100644 --- a/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h +++ b/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h diff --git a/arch/arm/include/asm/arch-tegra2/uart.h b/arch/arm/include/asm/arch-tegra20/uart.h index aea29a7588..aea29a7588 100644 --- a/arch/arm/include/asm/arch-tegra2/uart.h +++ b/arch/arm/include/asm/arch-tegra20/uart.h diff --git a/arch/arm/include/asm/arch-tegra2/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h index 638033be50..638033be50 100644 --- a/arch/arm/include/asm/arch-tegra2/usb.h +++ b/arch/arm/include/asm/arch-tegra20/usb.h diff --git a/arch/arm/include/asm/arch-tegra2/warmboot.h b/arch/arm/include/asm/arch-tegra20/warmboot.h index 99ac2e7d23..99ac2e7d23 100644 --- a/arch/arm/include/asm/arch-tegra2/warmboot.h +++ b/arch/arm/include/asm/arch-tegra20/warmboot.h diff --git a/arch/arm/include/asm/arch-u8500/clock.h b/arch/arm/include/asm/arch-u8500/clock.h index b00ab0d215..2a14784093 100644 --- a/arch/arm/include/asm/arch-u8500/clock.h +++ b/arch/arm/include/asm/arch-u8500/clock.h @@ -64,9 +64,6 @@ struct prcmu { extern void u8500_clock_enable(int periph, int kern, int cluster); -static inline void u8500_prcmu_enable(unsigned int *reg) -{ - writel(readl(reg) | (1 << 8), reg); -} +void db8500_clocks_init(void); #endif /* __ASM_ARCH_CLOCK */ diff --git a/arch/arm/include/asm/arch-u8500/db8500_gpio.h b/arch/arm/include/asm/arch-u8500/db8500_gpio.h new file mode 100644 index 0000000000..7c85a89172 --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/db8500_gpio.h @@ -0,0 +1,42 @@ +/* + * Structures and registers for GPIO access in the Nomadik SoC + * + * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. + * The purpose is that GPIO config found in kernel should work by simply + * copy-paste it to U-boot. + * + * Ported to U-boot by: + * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> + * Copyright (C) 2008 STMicroelectronics + * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> + * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __DB8500_GPIO_H__ +#define __DB8500_GPIO_H__ + +/* Alternate functions: function C is set in hw by setting both A and B */ +enum db8500_gpio_alt { + DB8500_GPIO_ALT_GPIO = 0, + DB8500_GPIO_ALT_A = 1, + DB8500_GPIO_ALT_B = 2, + DB8500_GPIO_ALT_C = (DB8500_GPIO_ALT_A | DB8500_GPIO_ALT_B) +}; + +enum db8500_gpio_pull { + DB8500_GPIO_PULL_NONE, + DB8500_GPIO_PULL_UP, + DB8500_GPIO_PULL_DOWN +}; + +void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull); +void db8500_gpio_make_input(unsigned gpio); +int db8500_gpio_get_input(unsigned gpio); +void db8500_gpio_make_output(unsigned gpio, int val); +void db8500_gpio_set_output(unsigned gpio, int val); + +#endif /* __DB8500_GPIO_H__ */ diff --git a/arch/arm/include/asm/arch-u8500/db8500_pincfg.h b/arch/arm/include/asm/arch-u8500/db8500_pincfg.h new file mode 100644 index 0000000000..64957016c1 --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/db8500_pincfg.h @@ -0,0 +1,170 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. + * The purpose is that GPIO config found in kernel should work by simply + * copy-paste it to U-boot. Ported 2010 to U-boot by: + * Author: Joakim Axelsson <joakim.axelsson AT stericsson.com> + * + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * + * + * Based on arch/arm/mach-pxa/include/mach/mfp.h: + * Copyright (C) 2007 Marvell International Ltd. + * eric miao <eric.miao@marvell.com> + */ + +#ifndef __DB8500_PINCFG_H +#define __DB8500_PINCFG_H + +#include "db8500_gpio.h" + +/* + * U-boot info: + * SLPM (sleep mode) config will be ignored by U-boot but it is still + * possible to configure it in order to keep cut-n-paste compability + * with Linux kernel config. + * + * pin configurations are represented by 32-bit integers: + * + * bit 0.. 8 - Pin Number (512 Pins Maximum) + * bit 9..10 - Alternate Function Selection + * bit 11..12 - Pull up/down state + * bit 13 - Sleep mode behaviour (not used in U-boot) + * bit 14 - Direction + * bit 15 - Value (if output) + * bit 16..18 - SLPM pull up/down state (not used in U-boot) + * bit 19..20 - SLPM direction (not used in U-boot) + * bit 21..22 - SLPM Value (if output) (not used in U-boot) + * + * to facilitate the definition, the following macros are provided + * + * PIN_CFG_DEFAULT - default config (0): + * pull up/down = disabled + * sleep mode = input/wakeup + * direction = input + * value = low + * SLPM direction = same as normal + * SLPM pull = same as normal + * SLPM value = same as normal + * + * PIN_CFG - default config with alternate function + * PIN_CFG_PULL - default config with alternate function and pull up/down + */ + +/* Sleep mode */ +enum db8500_gpio_slpm { + DB8500_GPIO_SLPM_INPUT, + DB8500_GPIO_SLPM_WAKEUP_ENABLE = DB8500_GPIO_SLPM_INPUT, + DB8500_GPIO_SLPM_NOCHANGE, + DB8500_GPIO_SLPM_WAKEUP_DISABLE = DB8500_GPIO_SLPM_NOCHANGE, +}; + +#define PIN_NUM_MASK 0x1ff +#define PIN_NUM(x) ((x) & PIN_NUM_MASK) + +#define PIN_ALT_SHIFT 9 +#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) +#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) +#define PIN_GPIO (DB8500_GPIO_ALT_GPIO << PIN_ALT_SHIFT) +#define PIN_ALT_A (DB8500_GPIO_ALT_A << PIN_ALT_SHIFT) +#define PIN_ALT_B (DB8500_GPIO_ALT_B << PIN_ALT_SHIFT) +#define PIN_ALT_C (DB8500_GPIO_ALT_C << PIN_ALT_SHIFT) + +#define PIN_PULL_SHIFT 11 +#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) +#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) +#define PIN_PULL_NONE (DB8500_GPIO_PULL_NONE << PIN_PULL_SHIFT) +#define PIN_PULL_UP (DB8500_GPIO_PULL_UP << PIN_PULL_SHIFT) +#define PIN_PULL_DOWN (DB8500_GPIO_PULL_DOWN << PIN_PULL_SHIFT) + +#define PIN_SLPM_SHIFT 13 +#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) +#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) +#define PIN_SLPM_MAKE_INPUT (DB8500_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_NOCHANGE (DB8500_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) +/* These two replace the above in DB8500v2+ */ +#define PIN_SLPM_WAKEUP_ENABLE \ + (DB8500_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_WAKEUP_DISABLE \ + (DB8500_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) + +#define PIN_DIR_SHIFT 14 +#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) +#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) +#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) +#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) + +#define PIN_VAL_SHIFT 15 +#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) +#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) +#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) +#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) + +#define PIN_SLPM_PULL_SHIFT 16 +#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL(x) \ + (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_NONE \ + ((1 + DB8500_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_UP \ + ((1 + DB8500_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_DOWN \ + ((1 + DB8500_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) + +#define PIN_SLPM_DIR_SHIFT 19 +#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR(x) \ + (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) + +#define PIN_SLPM_VAL_SHIFT 21 +#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL(x) \ + (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) + +/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ +#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) +#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) +#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) +#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) +#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) + +#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) +#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) +#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) +#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) +#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) + +#define PIN_CFG_DEFAULT (0) + +#define PIN_CFG(num, alt) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt)) + +#define PIN_CFG_INPUT(num, alt, pull) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) + +#define PIN_CFG_OUTPUT(num, alt, val) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) + +#define PIN_CFG_PULL(num, alt, pull) \ + ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ + (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) + +/** + * db8500_gpio_config_pins - configure several pins at once + * @cfgs: array of pin configurations + * @num: number of elments in the array + * + * Configures several GPIO pins. + */ +void db8500_gpio_config_pins(unsigned long *cfgs, size_t num); + +#endif diff --git a/arch/arm/include/asm/arch-u8500/hardware.h b/arch/arm/include/asm/arch-u8500/hardware.h index 6bb95ec070..ee0341932c 100644 --- a/arch/arm/include/asm/arch-u8500/hardware.h +++ b/arch/arm/include/asm/arch-u8500/hardware.h @@ -62,7 +62,7 @@ /* Per4 */ #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) /* Per3 */ #define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) @@ -77,7 +77,34 @@ #define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) /* Last page of Boot ROM */ -#define U8500_BOOTROM_BASE 0x9001f000 -#define U8500_BOOTROM_ASIC_ID_OFFSET 0x0ff4 +#define U8500_BOOTROM_BASE 0x90000000 +#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOTROM_BASE + 0x1FFF4) +#define U8500_ASIC_ID_LOC_V2 (U8500_BOOTROM_BASE + 0x1DBF4) + +/* AB8500 specifics */ + +/* address bank */ +#define AB8500_REGU_CTRL2 0x0004 +#define AB8500_MISC 0x0010 + +/* registers */ +#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A +#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421 +#define AB8500_REV_REG 0x1080 + +#define AB8500_GPIO_SEL2_REG 0x1001 +#define AB8500_GPIO_DIR2_REG 0x1011 +#define AB8500_GPIO_DIR4_REG 0x1013 +#define AB8500_GPIO_SEL4_REG 0x1003 +#define AB8500_GPIO_OUT2_REG 0x1021 +#define AB8500_GPIO_OUT4_REG 0x1023 + +#define LDO_VAUX3_ENABLE_MASK 0x3 +#define LDO_VAUX3_ENABLE_VAL 0x1 +#define LDO_VAUX3_SEL_MASK 0xf +#define LDO_VAUX3_SEL_2V9 0xd +#define LDO_VAUX3_V2_SEL_MASK 0x7 +#define LDO_VAUX3_V2_SEL_2V91 0x7 + #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/board/st-ericsson/u8500/prcmu-fw.h b/arch/arm/include/asm/arch-u8500/prcmu.h index 0836983fae..e9dcc9325c 100644 --- a/board/st-ericsson/u8500/prcmu-fw.h +++ b/arch/arm/include/asm/arch-u8500/prcmu.h @@ -27,12 +27,27 @@ #define I2C_RD_OK 2 #define I2CWRITE 0 -#define _PRCMU_TCDM_BASE U8500_PRCMU_TCDM_BASE -#define PRCM_XP70_CUR_PWR_STATE (_PRCMU_TCDM_BASE + 0xFFC) /* 4 BYTES */ - -#define PRCM_REQ_MB5 (_PRCMU_TCDM_BASE + 0xE44) /* 4 bytes */ -#define PRCM_ACK_MB5 (_PRCMU_TCDM_BASE + 0xDF4) /* 4 bytes */ +#define PRCMU_BASE U8500_PRCMU_BASE +#define PRCMU_BASE_TCDM U8500_PRCMU_TCDM_BASE +#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018) +#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C) +#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020) +#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024) +#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C) +#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030) +#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034) +#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038) +#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C) +#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040) +#define PRCM_MBOX_CPU_VAL (PRCMU_BASE + 0x0FC) +#define PRCM_MBOX_CPU_SET (PRCMU_BASE + 0x100) +#define PRCM_ARM_IT1_CLEAR (PRCMU_BASE + 0x48C) +#define PRCM_ARM_IT1_VAL (PRCMU_BASE + 0x494) +#define PRCM_TCR (PRCMU_BASE + 0x1C8) +#define PRCM_REQ_MB5 (PRCMU_BASE_TCDM + 0xE44) +#define PRCM_ACK_MB5 (PRCMU_BASE_TCDM + 0xDF4) +#define PRCM_XP70_CUR_PWR_STATE (PRCMU_BASE_TCDM + 0xFFC) /* Mailbox 5 Requests */ #define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0) #define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1) @@ -49,7 +64,13 @@ #define REQ_MB5 5 -extern int prcmu_i2c_read(u8 reg, u16 slave); -extern int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data); +#define ab8500_read prcmu_i2c_read +#define ab8500_write prcmu_i2c_write + +int prcmu_i2c_read(u8 reg, u16 slave); +int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data); + +void u8500_prcmu_enable(u32 *reg); +void db8500_prcmu_init(void); #endif /* __MACH_PRCMU_FW_V1_H */ diff --git a/arch/arm/include/asm/arch-u8500/sys_proto.h b/arch/arm/include/asm/arch-u8500/sys_proto.h index bac5e79990..a8ef9e5f44 100644 --- a/arch/arm/include/asm/arch-u8500/sys_proto.h +++ b/arch/arm/include/asm/arch-u8500/sys_proto.h @@ -23,5 +23,6 @@ #define _SYS_PROTO_H_ void gpio_init(void); +int u8500_mmc_power_init(void); #endif /* _SYS_PROTO_H_ */ diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 674c3de661..ed251ec8ec 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -19,7 +19,7 @@ #define EMIF1_BASE 0x4c000000 #define EMIF2_BASE 0x4d000000 -/* Registers shifts and masks */ +/* Registers shifts, masks and values */ /* EMIF_MOD_ID_REV */ #define EMIF_REG_SCHEME_SHIFT 30 @@ -46,6 +46,12 @@ /* SDRAM_CONFIG */ #define EMIF_REG_SDRAM_TYPE_SHIFT 29 #define EMIF_REG_SDRAM_TYPE_MASK (0x7 << 29) +#define EMIF_REG_SDRAM_TYPE_DDR1 0 +#define EMIF_REG_SDRAM_TYPE_LPDDR1 1 +#define EMIF_REG_SDRAM_TYPE_DDR2 2 +#define EMIF_REG_SDRAM_TYPE_DDR3 3 +#define EMIF_REG_SDRAM_TYPE_LPDDR2_S4 4 +#define EMIF_REG_SDRAM_TYPE_LPDDR2_S2 5 #define EMIF_REG_IBANK_POS_SHIFT 27 #define EMIF_REG_IBANK_POS_MASK (0x3 << 27) #define EMIF_REG_DDR_TERM_SHIFT 24 diff --git a/arch/arm/include/asm/imx-common/boot_mode.h b/arch/arm/include/asm/imx-common/boot_mode.h new file mode 100644 index 0000000000..6d2df7411b --- /dev/null +++ b/arch/arm/include/asm/imx-common/boot_mode.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2012 Boundary Devices Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_BOOT_MODE_H +#define _ASM_BOOT_MODE_H +#define MAKE_CFGVAL(cfg1, cfg2, cfg3, cfg4) \ + ((cfg4) << 24) | ((cfg3) << 16) | ((cfg2) << 8) | (cfg1) + +struct boot_mode { + const char *name; + unsigned cfg_val; +}; + +void add_board_boot_modes(const struct boot_mode *p); +void boot_mode_apply(unsigned cfg_val); +extern const struct boot_mode soc_boot_modes[]; +#endif diff --git a/arch/arm/include/asm/imx-common/gpio.h b/arch/arm/include/asm/imx-common/gpio.h new file mode 100644 index 0000000000..65226d9b44 --- /dev/null +++ b/arch/arm/include/asm/imx-common/gpio.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, <sbabic@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __ASM_ARCH_IMX_GPIO_H +#define __ASM_ARCH_IMX_GPIO_H + +#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +/* GPIO registers */ +struct gpio_regs { + u32 gpio_dr; /* data */ + u32 gpio_dir; /* direction */ + u32 gpio_psr; /* pad satus */ +}; +#endif + +#define IMX_GPIO_NR(port, index) ((((port)-1)*32)+((index)&31)) + +#endif diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index 788b413219..4558f4fba2 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -100,115 +100,4 @@ typedef u64 iomux_v3_cfg_t; int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count); -/* - * IOMUXC_GPR13 bit fields - */ -#define IOMUXC_GPR13_SDMA_STOP_REQ (1<<30) -#define IOMUXC_GPR13_CAN2_STOP_REQ (1<<29) -#define IOMUXC_GPR13_CAN1_STOP_REQ (1<<28) -#define IOMUXC_GPR13_ENET_STOP_REQ (1<<27) -#define IOMUXC_GPR13_SATA_PHY_8_MASK (7<<24) -#define IOMUXC_GPR13_SATA_PHY_7_MASK (0x1f<<19) -#define IOMUXC_GPR13_SATA_PHY_6_SHIFT 16 -#define IOMUXC_GPR13_SATA_PHY_6_MASK (7<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) -#define IOMUXC_GPR13_SATA_SPEED_MASK (1<<15) -#define IOMUXC_GPR13_SATA_PHY_5_MASK (1<<14) -#define IOMUXC_GPR13_SATA_PHY_4_MASK (7<<11) -#define IOMUXC_GPR13_SATA_PHY_3_MASK (0x1f<<7) -#define IOMUXC_GPR13_SATA_PHY_2_MASK (0x1f<<2) -#define IOMUXC_GPR13_SATA_PHY_1_MASK (3<<0) - -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0b000<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (0b001<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (0b010<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P0DB (0b011<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_2P5DB (0b100<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB (0b101<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P5DB (0b110<<24) -#define IOMUXC_GPR13_SATA_PHY_8_RXEQ_4P0DB (0b111<<24) - -#define IOMUXC_GPR13_SATA_PHY_7_SATA1I (0b10000<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA1M (0b10000<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA1X (0b11010<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA2I (0b10010<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA2M (0b10010<<19) -#define IOMUXC_GPR13_SATA_PHY_7_SATA2X (0b11010<<19) - -#define IOMUXC_GPR13_SATA_SPEED_1P5G (0<<15) -#define IOMUXC_GPR13_SATA_SPEED_3G (1<<15) - -#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED (0<<14) -#define IOMUXC_GPR13_SATA_SATA_PHY_5_SS_ENABLED (1<<14) - -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_16_16 (0<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_14_16 (1<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_12_16 (2<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_10_16 (3<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 (4<<11) -#define IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_8_16 (5<<11) - -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB (0b0000<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P37_DB (0b0001<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P74_DB (0b0010<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P11_DB (0b0011<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P48_DB (0b0100<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_1P85_DB (0b0101<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P22_DB (0b0110<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P59_DB (0b0111<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_2P96_DB (0b1000<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P33_DB (0b1001<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_3P70_DB (0b1010<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P07_DB (0b1011<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P44_DB (0b1100<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_4P81_DB (0b1101<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P28_DB (0b1110<<7) -#define IOMUXC_GPR13_SATA_PHY_3_TXBOOST_5P75_DB (0b1111<<7) - -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P937V (0b00000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P947V (0b00001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P957V (0b00010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P966V (0b00011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P976V (0b00100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P986V (0b00101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_0P996V (0b00110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P005V (0b00111<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P015V (0b01000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P025V (0b01001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P035V (0b01010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P045V (0b01011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P054V (0b01100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P064V (0b01101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P074V (0b01110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P084V (0b01111<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P094V (0b10000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P104V (0b10001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P113V (0b10010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P123V (0b10011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P133V (0b10100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P143V (0b10101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P152V (0b10110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P162V (0b10111<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P172V (0b11000<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P182V (0b11001<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P191V (0b11010<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P201V (0b11011<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P211V (0b11100<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P221V (0b11101<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P230V (0b11110<<2) -#define IOMUXC_GPR13_SATA_PHY_2_TX_1P240V (0b11111<<2) - -#define IOMUXC_GPR13_SATA_PHY_1_FAST 0 -#define IOMUXC_GPR13_SATA_PHY_1_MEDIUM 1 -#define IOMUXC_GPR13_SATA_PHY_1_SLOW 2 - -#define IOMUXC_GPR13_SATA_MASK (IOMUXC_GPR13_SATA_PHY_8_MASK \ - |IOMUXC_GPR13_SATA_PHY_7_MASK \ - |IOMUXC_GPR13_SATA_PHY_6_MASK \ - |IOMUXC_GPR13_SATA_SPEED_MASK \ - |IOMUXC_GPR13_SATA_PHY_5_MASK \ - |IOMUXC_GPR13_SATA_PHY_4_MASK \ - |IOMUXC_GPR13_SATA_PHY_3_MASK \ - |IOMUXC_GPR13_SATA_PHY_2_MASK \ - |IOMUXC_GPR13_SATA_PHY_1_MASK) - #endif /* __MACH_IOMUX_V3_H__*/ diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 4e95eee59b..71ef9b077f 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -67,7 +67,7 @@ void preloader_console_init(void); #elif defined(CONFIG_AM33XX) /* AM33XX */ #define BOOT_DEVICE_NAND 5 #define BOOT_DEVICE_MMC1 8 -#define BOOT_DEVICE_MMC2 0 +#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ #define BOOT_DEVICE_UART 65 #define BOOT_DEVICE_MMC2_2 0xFF #endif diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 39a9550376..bd3b77f2e6 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(ARCH).o LIBGCC = $(obj)libgcc.o -ifndef CONFIG_SPL_BUILD GLSOBJS += _ashldi3.o GLSOBJS += _ashrdi3.o GLSOBJS += _divsi3.o @@ -37,6 +36,7 @@ GLSOBJS += _umodsi3.o GLCOBJS += div0.o +ifndef CONFIG_SPL_BUILD COBJS-y += board.o COBJS-y += bootm.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c index 54f9b64389..776226fcb3 100644 --- a/board/BuS/eb_cpux9k2/cpux9k2.c +++ b/board/BuS/eb_cpux9k2/cpux9k2.c @@ -59,8 +59,6 @@ DECLARE_GLOBAL_DATA_PTR; int board_init(void) { at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - /* Enable Ctrlc */ - console_init_f(); /* Correct IRDA resistor problem / Set PA23_TXD in Output */ writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer); diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c index 62ed6fb432..84b2060aed 100644 --- a/board/BuS/vl_ma2sc/vl_ma2sc.c +++ b/board/BuS/vl_ma2sc/vl_ma2sc.c @@ -244,9 +244,6 @@ int board_init(void) writel(pin, &pio->piod.odr); writel(pin, &pio->piod.owdr); - /* Enable Ctrlc */ - console_init_f(); - gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC; /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c index 34ede87ff4..f2b4284267 100644 --- a/board/CarMediaLab/flea3/flea3.c +++ b/board/CarMediaLab/flea3/flea3.c @@ -165,8 +165,8 @@ static void board_setup_sdram(void) static void setup_iomux_uart3(void) { - mxc_request_iomux(MX35_PIN_RTS2_UART3_RXD_MUX, MUX_CONFIG_ALT7); - mxc_request_iomux(MX35_PIN_CTS2_UART3_TXD_MUX, MUX_CONFIG_ALT7); + mxc_request_iomux(MX35_PIN_RTS2, MUX_CONFIG_ALT7); + mxc_request_iomux(MX35_PIN_CTS2, MUX_CONFIG_ALT7); } static void setup_iomux_i2c(void) @@ -247,7 +247,7 @@ int board_early_init_f(void) /* enable clocks */ writel(readl(&ccm->cgr0) | MXC_CCM_CGR0_EMI_MASK | - MXC_CCM_CGR0_EDI0_MASK | + MXC_CCM_CGR0_EDIO_MASK | MXC_CCM_CGR0_EPIT1_MASK, &ccm->cgr0); diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/ca9x4_ct_vxp.c index 0b36d1280a..d5e109ec06 100644 --- a/board/armltd/vexpress/ca9x4_ct_vxp.c +++ b/board/armltd/vexpress/ca9x4_ct_vxp.c @@ -33,6 +33,8 @@ * MA 02111-1307 USA */ #include <common.h> +#include <malloc.h> +#include <errno.h> #include <netdev.h> #include <asm/io.h> #include <asm/arch/systimer.h> @@ -90,8 +92,25 @@ int board_eth_init(bd_t *bis) int cpu_mmc_init(bd_t *bis) { int rc = 0; + (void) bis; #ifdef CONFIG_ARM_PL180_MMCI - rc = arm_pl180_mmci_init(); + struct pl180_mmc_host *host; + + host = malloc(sizeof(struct pl180_mmc_host)); + if (!host) + return -ENOMEM; + memset(host, 0, sizeof(*host)); + + strcpy(host->name, "MMC"); + host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; + host->pwr_init = INIT_PWR; + host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN; + host->voltages = VOLTAGE_WINDOW_MMC; + host->caps = 0; + host->clock_in = ARM_MCLK; + host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1)); + host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; + rc = arm_pl180_mmci_init(host); #endif return rc; } diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 47ab83967d..d30a1eeef6 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -242,9 +242,6 @@ void lcd_show_board_info(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - #ifdef CONFIG_AT91SAM9G10EK /* arch number of AT91SAM9G10EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK; diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 60ff1c0cd3..abae93d54c 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -260,9 +260,6 @@ int board_early_init_f(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* arch number of AT91SAM9263EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK; /* adress of boot parameters */ diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index 5a042749fe..d02312cd57 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -258,9 +258,6 @@ int board_early_init_f(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* arch number of AT91SAM9M10G45EK-Board */ #ifdef CONFIG_AT91SAM9M10G45EK gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK; diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index ef0ddd780b..e92ec6e6b7 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -192,9 +192,6 @@ int board_early_init_f(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* arch number of AT91SAM9RLEK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK; /* adress of boot parameters */ diff --git a/board/atmel/at91sam9x5ek/Makefile b/board/atmel/at91sam9x5ek/Makefile new file mode 100644 index 0000000000..458d9a0ea4 --- /dev/null +++ b/board/atmel/at91sam9x5ek/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian@popies.net> +# Lead Tech Design <www.leadtechdesign.com> +# +# (C) Copyright 2012 +# Bo Shen <voice.shen@atmel.com> +# Atmel corporation <www.atmel.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += at91sam9x5ek.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c new file mode 100644 index 0000000000..ae408bc9db --- /dev/null +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -0,0 +1,295 @@ +/* + * Copyright (C) 2012 Atmel Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91sam9x5_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/clk.h> +#include <lcd.h> +#include <atmel_hlcdc.h> +#ifdef CONFIG_MACB +#include <net.h> +#endif +#include <netdev.h> +#ifdef CONFIG_LCD_INFO +#include <nand.h> +#include <version.h> +#endif +#ifdef CONFIG_ATMEL_SPI +#include <spi.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ +#ifdef CONFIG_CMD_NAND +static void at91sam9x5ek_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + unsigned long csa; + + /* Enable CS3 */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA; + /* NAND flash on D16 */ + csa |= AT91_MATRIX_NFD0_ON_D16; + writel(csa, &matrix->ebicsa); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) | + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(6), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(6), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_MODE_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_MODE_DBW_8 | +#endif + AT91_SMC_MODE_TDF_CYCLE(1), + &smc->cs[3].mode); + + writel(1 << ATMEL_ID_PIOCD, &pmc->pcer); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + + at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ + at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ + at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */ + at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */ + at91_set_a_periph(AT91_PIO_PORTD, 6, 1); + at91_set_a_periph(AT91_PIO_PORTD, 7, 1); + at91_set_a_periph(AT91_PIO_PORTD, 8, 1); + at91_set_a_periph(AT91_PIO_PORTD, 9, 1); + at91_set_a_periph(AT91_PIO_PORTD, 10, 1); + at91_set_a_periph(AT91_PIO_PORTD, 11, 1); + at91_set_a_periph(AT91_PIO_PORTD, 12, 1); + at91_set_a_periph(AT91_PIO_PORTD, 13, 1); +} +#endif + +int board_eth_init(bd_t *bis) +{ + int rc = 0; + +#ifdef CONFIG_MACB + if (has_emac0()) + rc = macb_eth_initialize(0, + (void *)ATMEL_BASE_EMAC0, 0x00); + if (has_emac1()) + rc = macb_eth_initialize(1, + (void *)ATMEL_BASE_EMAC1, 0x00); +#endif + return rc; +} + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + .vl_col = 800, + .vl_row = 480, + .vl_clk = 24000000, + .vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL, + .vl_bpix = LCD_BPP, + .vl_tft = 1, + .vl_clk_pol = 1, + .vl_hsync_len = 128, + .vl_left_margin = 64, + .vl_right_margin = 64, + .vl_vsync_len = 2, + .vl_upper_margin = 22, + .vl_lower_margin = 21, + .mmio = ATMEL_BASE_LCDC, +}; + +void lcd_enable(void) +{ + if (has_lcdc()) + at91_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */ +} + +void lcd_disable(void) +{ + if (has_lcdc()) + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */ +} + +static void at91sam9x5ek_lcd_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + if (has_lcdc()) { + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */ + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */ + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */ + + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ + at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ + at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ + at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ + + writel(1 << ATMEL_ID_LCDC, &pmc->pcer); + } +} + +#ifdef CONFIG_LCD_INFO +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + if (has_lcdc()) { + lcd_printf("%s\n", U_BOOT_VERSION); + lcd_printf("(C) 2012 ATMEL Corp\n"); + lcd_printf("at91support@atmel.com\n"); + lcd_printf("%s CPU at %s MHz\n", + get_cpu_name(), + strmhz(temp, get_cpu_clk_rate())); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + lcd_printf(" %ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, + nand_size >> 20); + } +} +#endif /* CONFIG_LCD_INFO */ +#endif /* CONFIG_LCD */ + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs < 2; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 1: + at91_set_pio_output(AT91_PIO_PORTA, 7, 0); + break; + case 0: + default: + at91_set_pio_output(AT91_PIO_PORTA, 14, 0); + break; + } +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 1: + at91_set_pio_output(AT91_PIO_PORTA, 7, 1); + break; + case 0: + default: + at91_set_pio_output(AT91_PIO_PORTA, 14, 1); + break; + } +} +#endif /* CONFIG_ATMEL_SPI */ + +int board_early_init_f(void) +{ + at91_seriald_hw_init(); + return 0; +} + +int board_init(void) +{ + /* arch number of AT91SAM9X5EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_CMD_NAND + at91sam9x5ek_nand_hw_init(); +#endif + +#ifdef CONFIG_ATMEL_SPI + at91_spi0_hw_init(1 << 0); + at91_spi0_hw_init(1 << 4); +#endif + +#ifdef CONFIG_MACB + at91_macb_hw_init(); +#endif + +#ifdef CONFIG_LCD + at91sam9x5ek_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} diff --git a/board/atmel/at91sam9x5ek/config.mk b/board/atmel/at91sam9x5ek/config.mk new file mode 100644 index 0000000000..6589a12a93 --- /dev/null +++ b/board/atmel/at91sam9x5ek/config.mk @@ -0,0 +1 @@ +CONFIG_SYS_TEXT_BASE = 0x26f00000 diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c index 2c14462eb6..a0a4d1d07d 100644 --- a/board/avionic-design/common/tamonten.c +++ b/board/avionic-design/common/tamonten.c @@ -28,7 +28,7 @@ #include <asm/io.h> #include <asm/gpio.h> #include <asm/arch/board.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/sys_proto.h> #include <asm/arch/clk_rst.h> #include <asm/arch/clock.h> @@ -78,7 +78,7 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); /* init dev 0, SD slot, with 4-bit bus */ - tegra2_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); + tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); return 0; } diff --git a/board/avionic-design/dts/tegra2-medcom.dts b/board/avionic-design/dts/tegra20-medcom.dts index fc52f9ce4e..fc52f9ce4e 100644 --- a/board/avionic-design/dts/tegra2-medcom.dts +++ b/board/avionic-design/dts/tegra20-medcom.dts diff --git a/board/avionic-design/dts/tegra2-plutux.dts b/board/avionic-design/dts/tegra20-plutux.dts index cef49ad804..cef49ad804 100644 --- a/board/avionic-design/dts/tegra2-plutux.dts +++ b/board/avionic-design/dts/tegra20-plutux.dts diff --git a/board/avionic-design/dts/tegra2-tec.dts b/board/avionic-design/dts/tegra20-tec.dts index 9faebd8bc6..9faebd8bc6 100644 --- a/board/avionic-design/dts/tegra2-tec.dts +++ b/board/avionic-design/dts/tegra20-tec.dts diff --git a/board/avionic-design/medcom/Makefile b/board/avionic-design/medcom/Makefile index d96d04306c..864bc0ec01 100644 --- a/board/avionic-design/medcom/Makefile +++ b/board/avionic-design/medcom/Makefile @@ -25,9 +25,7 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) -endif LIB = $(obj)lib$(BOARD).o diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile index d96d04306c..864bc0ec01 100644 --- a/board/avionic-design/plutux/Makefile +++ b/board/avionic-design/plutux/Makefile @@ -25,9 +25,7 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) -endif LIB = $(obj)lib$(BOARD).o diff --git a/board/avionic-design/tec/Makefile b/board/avionic-design/tec/Makefile index d96d04306c..864bc0ec01 100644 --- a/board/avionic-design/tec/Makefile +++ b/board/avionic-design/tec/Makefile @@ -25,9 +25,7 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) -endif LIB = $(obj)lib$(BOARD).o diff --git a/board/bluegiga/apx4devkit/Makefile b/board/bluegiga/apx4devkit/Makefile new file mode 100644 index 0000000000..68ab8f30f3 --- /dev/null +++ b/board/bluegiga/apx4devkit/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +ifndef CONFIG_SPL_BUILD +COBJS := apx4devkit.o +else +COBJS := spl_boot.o +endif + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/bluegiga/apx4devkit/apx4devkit.c b/board/bluegiga/apx4devkit/apx4devkit.c new file mode 100644 index 0000000000..ae48ab58f8 --- /dev/null +++ b/board/bluegiga/apx4devkit/apx4devkit.c @@ -0,0 +1,150 @@ +/* + * Bluegiga APX4 Development Kit + * + * Copyright (C) 2012 Bluegiga Technologies Oy + * + * Authors: + * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> + * Lauri Hintsala <lauri.hintsala@bluegiga.com> + * + * Based on m28evk.c: + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux-mx28.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <linux/mii.h> +#include <miiphy.h> +#include <netdev.h> +#include <errno.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Functions */ +int board_early_init_f(void) +{ + /* IO0 clock at 480MHz */ + mx28_set_ioclk(MXC_IOCLK0, 480000); + /* IO1 clock at 480MHz */ + mx28_set_ioclk(MXC_IOCLK1, 480000); + + /* SSP0 clock at 96MHz */ + mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); + + return 0; +} + +int dram_init(void) +{ + return mxs_dram_init(); +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + return mxsmmc_initialize(bis, 0, NULL); +} +#endif + + +#ifdef CONFIG_CMD_NET + +#define MII_PHY_CTRL2 0x1f +int fecmxc_mii_postcall(int phy) +{ + /* change PHY RMII clock to 50MHz */ + miiphy_write("FEC", 0, MII_PHY_CTRL2, 0x8180); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int ret; + struct eth_device *dev; + + ret = cpu_eth_init(bis); + if (ret) { + printf("FEC MXS: Unable to init FEC clocks\n"); + return ret; + } + + ret = fecmxc_initialize(bis); + if (ret) { + printf("FEC MXS: Unable to init FEC\n"); + return ret; + } + + dev = eth_get_dev_by_name("FEC"); + if (!dev) { + printf("FEC MXS: Unable to get FEC device entry\n"); + return -EINVAL; + } + + ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall); + if (ret) { + printf("FEC MXS: Unable to register FEC MII postcall\n"); + return ret; + } + + return ret; +} +#endif + +#ifdef CONFIG_SERIAL_TAG +#define MXS_OCOTP_MAX_TIMEOUT 1000000 +void get_board_serial(struct tag_serialnr *serialnr) +{ + struct mxs_ocotp_regs *ocotp_regs = + (struct mxs_ocotp_regs *)MXS_OCOTP_BASE; + + serialnr->high = 0; + serialnr->low = 0; + + writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set); + + if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY, + MXS_OCOTP_MAX_TIMEOUT)) { + printf("MXS: Can't get serial number from OCOTP\n"); + return; + } + + serialnr->low = readl(&ocotp_regs->hw_ocotp_cust3); +} +#endif + +#ifdef CONFIG_REVISION_TAG +u32 get_board_rev(void) +{ + if (getenv("revision#") != NULL) + return simple_strtoul(getenv("revision#"), NULL, 10); + return 0; +} +#endif diff --git a/board/bluegiga/apx4devkit/spl_boot.c b/board/bluegiga/apx4devkit/spl_boot.c new file mode 100644 index 0000000000..f7dbe41a33 --- /dev/null +++ b/board/bluegiga/apx4devkit/spl_boot.c @@ -0,0 +1,164 @@ +/* + * Bluegiga APX4 Development Kit + * + * Copyright (C) 2012 Bluegiga Technologies Oy + * + * Authors: + * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> + * Lauri Hintsala <lauri.hintsala@bluegiga.com> + * + * Based on spl_boot.c: + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <config.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/iomux-mx28.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) +#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) + +const iomux_cfg_t iomux_setup[] = { + /* DUART */ + MX28_PAD_PWM0__DUART_RX, + MX28_PAD_PWM1__DUART_TX, + + /* LED */ + MX28_PAD_PWM3__GPIO_3_28, + + /* MMC0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* GPMI NAND */ + MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_RDN__GPMI_RDN | + (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP), + MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI, + MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI, + + /* FEC0 */ + MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET, + + /* I2C */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* EMI */ + MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI, + MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI, + MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI, + + MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, + MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, + MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, + MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, + MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, + MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, +}; + +void board_init_ll(void) +{ + mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); + + /* switch LED on */ + gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0); +} + +void mxs_adjust_memory_params(uint32_t *dram_vals) +{ + /* + * All address lines are routed from CPU to memory chip. + * ADDR_PINS field is set to zero. + */ + dram_vals[0x74 >> 2] = 0x0f02000a; + + /* Used memory has 4 banks. EIGHT_BANK_MODE bit is disabled. */ + dram_vals[0x7c >> 2] = 0x00000101; +} diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c index b6c8791f04..d3b368451b 100644 --- a/board/calao/sbc35_a9g20/sbc35_a9g20.c +++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c @@ -149,9 +149,6 @@ static void sbc35_a9g20_macb_hw_init(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c index 31074d0e21..86e7e65caf 100644 --- a/board/calao/tny_a9260/tny_a9260.c +++ b/board/calao/tny_a9260/tny_a9260.c @@ -83,9 +83,6 @@ static void tny_a9260_nand_hw_init(void) int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); - /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c index 700c184944..6c2e95b1d4 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/cm_t35/cm_t35.c @@ -74,7 +74,7 @@ static u32 gpmc_nand_config[GPMC_MAX_REG] = { /* * Routine: board_init - * Description: Early hardware init. + * Description: hardware init. */ int board_init(void) { @@ -438,7 +438,7 @@ int board_eth_init(bd_t *bis) rc1 = handle_mac_address(); if (rc1) - printf("CM-T3x: No MAC address found\n"); + printf("No MAC address found! "); rc1 = smc911x_initialize(0, CM_T3X_SMC911X_BASE); if (rc1 > 0) diff --git a/board/compal/dts/tegra2-paz00.dts b/board/compal/dts/tegra20-paz00.dts index 9e3e169069..9e3e169069 100644 --- a/board/compal/dts/tegra2-paz00.dts +++ b/board/compal/dts/tegra20-paz00.dts diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile index 488e381016..7f7287ee9a 100644 --- a/board/compal/paz00/Makefile +++ b/board/compal/paz00/Makefile @@ -16,9 +16,7 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) $(shell mkdir -p $(obj)../../nvidia/common) -endif LIB = $(obj)lib$(BOARD).o diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index ec678746d3..cd684f2926 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -16,7 +16,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/pinmux.h> #include <asm/arch/mmc.h> #include <asm/gpio.h> @@ -70,11 +70,11 @@ int board_mmc_init(bd_t *bd) debug("board_mmc_init: init eMMC\n"); /* init dev 0, eMMC chip, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra2_mmc_init(0, 4, -1, -1); + tegra20_mmc_init(0, 4, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 3, SD slot, with 4-bit bus */ - tegra2_mmc_init(3, 4, GPIO_PV1, GPIO_PV5); + tegra20_mmc_init(3, 4, GPIO_PV1, GPIO_PV5); return 0; } diff --git a/board/compulab/dts/tegra2-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts index db79e7796d..db79e7796d 100644 --- a/board/compulab/dts/tegra2-trimslice.dts +++ b/board/compulab/dts/tegra20-trimslice.dts diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile index bf624f41a2..ff0787967d 100644 --- a/board/compulab/trimslice/Makefile +++ b/board/compulab/trimslice/Makefile @@ -24,9 +24,7 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) $(shell mkdir -p $(obj)../../nvidia/common) -endif LIB = $(obj)lib$(BOARD).o diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 1ac15f8da5..5dae15b962 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -24,7 +24,7 @@ #include <common.h> #include <i2c.h> #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> @@ -69,10 +69,10 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); /* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */ - tegra2_mmc_init(0, 4, -1, GPIO_PP1); + tegra20_mmc_init(0, 4, -1, GPIO_PP1); /* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */ - tegra2_mmc_init(3, 4, -1, -1); + tegra20_mmc_init(3, 4, -1, -1); return 0; } diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 004d5ad6d4..0c7aabb134 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -36,6 +36,11 @@ #include <asm/errno.h> #include <hwconfig.h> +#ifdef CONFIG_DAVINCI_MMC +#include <mmc.h> +#include <asm/arch/sdmmc_defs.h> +#endif + DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_DRIVER_TI_EMAC @@ -204,11 +209,32 @@ int misc_init_r(void) return 0; } +#ifdef CONFIG_DAVINCI_MMC +static struct davinci_mmc mmc_sd0 = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, + .host_caps = MMC_MODE_4BIT, /* DA850 supports only 4-bit SD/MMC */ + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .version = MMC_CTLR_VERSION_2, +}; + +int board_mmc_init(bd_t *bis) +{ + mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID); + + /* Add slot-0 to mmc subsystem */ + return davinci_mmc_init(bis, &mmc_sd0); +} +#endif + static const struct pinmux_config gpio_pins[] = { #ifdef CONFIG_USE_NOR /* GP0[11] is required for NOR to work on Rev 3 EVMs */ { pinmux(0), 8, 4 }, /* GP0[11] */ #endif +#ifdef CONFIG_DAVINCI_MMC + /* GP0[11] is required for SD to work on Rev 3 EVMs */ + { pinmux(0), 8, 4 }, /* GP0[11] */ +#endif }; const struct pinmux_resource pinmuxes[] = { @@ -236,6 +262,9 @@ const struct pinmux_resource pinmuxes[] = { PINMUX_ITEM(emifa_pins_nor), #endif PINMUX_ITEM(gpio_pins), +#ifdef CONFIG_DAVINCI_MMC + PINMUX_ITEM(mmc0_pins), +#endif }; const int pinmuxes_size = ARRAY_SIZE(pinmuxes); @@ -246,6 +275,9 @@ const struct lpsc_resource lpsc[] = { { DAVINCI_LPSC_EMAC }, /* image download */ { DAVINCI_LPSC_UART2 }, /* console */ { DAVINCI_LPSC_GPIO }, +#ifdef CONFIG_DAVINCI_MMC + { DAVINCI_LPSC_MMC_SD }, +#endif }; const int lpsc_size = ARRAY_SIZE(lpsc); @@ -303,7 +335,7 @@ int board_early_init_f(void) int board_init(void) { -#ifdef CONFIG_USE_NOR +#if defined(CONFIG_USE_NOR) || defined(CONFIG_DAVINCI_MMC) u32 val; #endif @@ -316,11 +348,11 @@ int board_init(void) * NAND CS setup - cycle counts based on da850evm NAND timings in the * Linux kernel @ 25MHz EMIFA */ - writel((DAVINCI_ABCR_WSETUP(0) | - DAVINCI_ABCR_WSTROBE(1) | - DAVINCI_ABCR_WHOLD(0) | - DAVINCI_ABCR_RSETUP(0) | - DAVINCI_ABCR_RSTROBE(1) | + writel((DAVINCI_ABCR_WSETUP(2) | + DAVINCI_ABCR_WSTROBE(2) | + DAVINCI_ABCR_WHOLD(1) | + DAVINCI_ABCR_RSETUP(1) | + DAVINCI_ABCR_RSTROBE(4) | DAVINCI_ABCR_RHOLD(0) | DAVINCI_ABCR_TA(1) | DAVINCI_ABCR_ASIZE_8BIT), @@ -354,6 +386,16 @@ int board_init(void) writel(val, GPIO_BANK0_REG_CLR_ADDR); #endif +#ifdef CONFIG_DAVINCI_MMC + /* Set the GPIO direction as output */ + clrbits_le32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11)); + + /* Set the output as high */ + val = readl(GPIO_BANK0_REG_SET_ADDR); + val |= (0x01 << 11); + writel(val, GPIO_BANK0_REG_SET_ADDR); +#endif + #ifdef CONFIG_DRIVER_TI_EMAC davinci_emac_mii_mode_sel(HAS_RMII); #endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/board/davinci/da8xxevm/hawkboard-ais-nand.cfg b/board/davinci/da8xxevm/hawkboard-ais-nand.cfg new file mode 100644 index 0000000000..2b12b6c08a --- /dev/null +++ b/board/davinci/da8xxevm/hawkboard-ais-nand.cfg @@ -0,0 +1,4 @@ +# PLL0CFG0 PLL0CFG1 +PLL0 0x00180001 0x00000205 +# PLL1CFG0 PLL1CFG1 DRPYC1R SDCR SDTIMR1 SDTIMR2 SDRCR CLK2XSRC +DDR2 0x15010001 0x00000002 0x00000043 0x00134632 0x26492a09 0x7d13c722 0x00000249 0x00000000 diff --git a/board/davinci/da8xxevm/hawkboard.c b/board/davinci/da8xxevm/hawkboard.c index b6942589f4..156cb7f4ca 100644 --- a/board/davinci/da8xxevm/hawkboard.c +++ b/board/davinci/da8xxevm/hawkboard.c @@ -4,6 +4,7 @@ * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc. <nsekhar@ti.com> * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * Copyright (C) 2004 Texas Instruments. + * Copyright (C) 2012 Sughosh Ganu <urwithsughosh@gmail.com>. * * ---------------------------------------------------------------------------- * This program is free software; you can redistribute it and/or modify @@ -28,6 +29,7 @@ #include <asm/io.h> #include <asm/arch/davinci_misc.h> #include <asm/arch/pinmux_defs.h> +#include <asm/arch/da8xx-usb.h> #include <ns16550.h> DECLARE_GLOBAL_DATA_PTR; @@ -89,3 +91,42 @@ int misc_init_r(void) return 0; } + +int usb_phy_on(void) +{ + u32 timeout; + u32 cfgchip2; + + cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2); + + cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | + CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ | + CFGCHIP2_USB1PHYCLKMUX); + cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON | + CFGCHIP2_REFFREQ_24MHZ | CFGCHIP2_USB2PHYCLKMUX | + CFGCHIP2_USB1SUSPENDM; + + writel(cfgchip2, &davinci_syscfg_regs->cfgchip2); + + /* wait until the usb phy pll locks */ + timeout = DA8XX_USB_OTG_TIMEOUT; + while (timeout--) + if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD) + return 1; + + /* USB phy was not turned on */ + return 0; +} + +void usb_phy_off(void) +{ + u32 cfgchip2; + + /* + * Power down the on-chip PHY. + */ + cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2); + cfgchip2 &= ~(CFGCHIP2_PHY_PLLON | CFGCHIP2_USB1SUSPENDM); + cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_RESET; + writel(cfgchip2, &davinci_syscfg_regs->cfgchip2); +} diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c index 3d28ea84de..9d6db65f1f 100644 --- a/board/denx/m28evk/m28evk.c +++ b/board/denx/m28evk/m28evk.c @@ -49,8 +49,8 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); - /* SSP2 clock at 96MHz */ - mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); + /* SSP2 clock at 160MHz */ + mx28_set_sspclk(MXC_SSPCLK2, 160000, 0); #ifdef CONFIG_CMD_USB mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT); @@ -72,7 +72,7 @@ int board_init(void) int dram_init(void) { - return mx28_dram_init(); + return mxs_dram_init(); } #ifdef CONFIG_CMD_MMC @@ -122,8 +122,8 @@ int fecmxc_mii_postcall(int phy) int board_eth_init(bd_t *bis) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; struct eth_device *dev; int ret; diff --git a/board/denx/m28evk/spl_boot.c b/board/denx/m28evk/spl_boot.c index 7a125925de..49e8a75c1c 100644 --- a/board/denx/m28evk/spl_boot.c +++ b/board/denx/m28evk/spl_boot.c @@ -218,5 +218,5 @@ const iomux_cfg_t iomux_setup[] = { void board_init_ll(void) { - mx28_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); + mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); } diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c deleted file mode 100644 index e88b2edfa1..0000000000 --- a/board/efikamx/efikamx.c +++ /dev/null @@ -1,735 +0,0 @@ -/* - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> -#include <asm/arch/iomux.h> -#include <asm/gpio.h> -#include <asm/errno.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/crm_regs.h> -#include <i2c.h> -#include <mmc.h> -#include <fsl_esdhc.h> -#include <pmic.h> -#include <fsl_pmic.h> -#include <mc13892.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Compile-time error checking - */ -#ifndef CONFIG_MXC_SPI -#error "CONFIG_MXC_SPI not set, this is essential for board's operation!" -#endif - -/* - * Shared variables / local defines - */ -/* LED */ -#define EFIKAMX_LED_BLUE 0x1 -#define EFIKAMX_LED_GREEN 0x2 -#define EFIKAMX_LED_RED 0x4 - -void efikamx_toggle_led(uint32_t mask); - -/* Board revisions */ -#define EFIKAMX_BOARD_REV_11 0x1 -#define EFIKAMX_BOARD_REV_12 0x2 -#define EFIKAMX_BOARD_REV_13 0x3 -#define EFIKAMX_BOARD_REV_14 0x4 - -#define EFIKASB_BOARD_REV_13 0x1 -#define EFIKASB_BOARD_REV_20 0x2 - -/* - * Board identification - */ -u32 get_efikamx_rev(void) -{ - u32 rev = 0; - /* - * Retrieve board ID: - * rev1.1: 1,1,1 - * rev1.2: 1,1,0 - * rev1.3: 1,0,1 - * rev1.4: 1,0,0 - */ - mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO); - /* set to 1 in order to get correct value on board rev1.1 */ - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1); - - mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS0, PAD_CTL_100K_PU); - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0)); - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0; - - mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS1, PAD_CTL_100K_PU); - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1)); - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1; - - mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, PAD_CTL_100K_PU); - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3)); - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2; - - return (~rev & 0x7) + 1; -} - -inline u32 get_efikasb_rev(void) -{ - u32 rev = 0; - - mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_EIM_CS3, PAD_CTL_100K_PU); - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3)); - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3))) << 0; - - mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_EIM_CS4, PAD_CTL_100K_PU); - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4)); - rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4))) << 1; - - return rev; -} - -inline uint32_t get_efika_rev(void) -{ - if (machine_is_efikamx()) - return get_efikamx_rev(); - else - return get_efikasb_rev(); -} - -u32 get_board_rev(void) -{ - return get_cpu_rev() | (get_efika_rev() << 8); -} - -/* - * DRAM initialization - */ -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, - PHYS_SDRAM_1_SIZE); - return 0; -} - -/* - * UART configuration - */ -static void setup_iomux_uart(void) -{ - unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; - - mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); - mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); -} - -/* - * SPI configuration - */ -#ifdef CONFIG_MXC_SPI -static void setup_iomux_spi(void) -{ - /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - - /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - - /* Configure SS0 as a GPIO */ - mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO); - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0); - - /* Configure SS1 as a GPIO */ - mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO); - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1); - - /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); -} -#else -static inline void setup_iomux_spi(void) { } -#endif - -/* - * PMIC configuration - */ -#ifdef CONFIG_MXC_SPI -static void power_init(void) -{ - unsigned int val; - struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; - struct pmic *p; - - pmic_init(); - p = get_pmic(); - - /* Write needed to Power Gate 2 register */ - pmic_reg_read(p, REG_POWER_MISC, &val); - val &= ~PWGT2SPIEN; - pmic_reg_write(p, REG_POWER_MISC, val); - - /* Externally powered */ - pmic_reg_read(p, REG_CHARGE, &val); - val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; - pmic_reg_write(p, REG_CHARGE, val); - - /* power up the system first */ - pmic_reg_write(p, REG_POWER_MISC, PWUP); - - /* Set core voltage to 1.1V */ - pmic_reg_read(p, REG_SW_0, &val); - val = (val & ~SWx_VOLT_MASK) | SWx_1_200V; - pmic_reg_write(p, REG_SW_0, val); - - /* Setup VCC (SW2) to 1.25 */ - pmic_reg_read(p, REG_SW_1, &val); - val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; - pmic_reg_write(p, REG_SW_1, val); - - /* Setup 1V2_DIG1 (SW3) to 1.25 */ - pmic_reg_read(p, REG_SW_2, &val); - val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; - pmic_reg_write(p, REG_SW_2, val); - udelay(50); - - /* Raise the core frequency to 800MHz */ - writel(0x0, &mxc_ccm->cacrr); - - /* Set switchers in Auto in NORMAL mode & STANDBY mode */ - /* Setup the switcher mode for SW1 & SW2*/ - pmic_reg_read(p, REG_SW_4, &val); - val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | - (SWMODE_MASK << SWMODE2_SHIFT))); - val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | - (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); - pmic_reg_write(p, REG_SW_4, val); - - /* Setup the switcher mode for SW3 & SW4 */ - pmic_reg_read(p, REG_SW_5, &val); - val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) | - (SWMODE_MASK << SWMODE4_SHIFT))); - val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) | - (SWMODE_AUTO_AUTO << SWMODE4_SHIFT); - pmic_reg_write(p, REG_SW_5, val); - - /* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */ - pmic_reg_read(p, REG_SETTING_0, &val); - val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK); - val |= VDIG_1_8 | VGEN3_1_8 | VCAM_2_6; - pmic_reg_write(p, REG_SETTING_0, val); - - /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ - pmic_reg_read(p, REG_SETTING_1, &val); - val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); - val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775 | VGEN1_1_2 | VGEN2_3_15; - pmic_reg_write(p, REG_SETTING_1, val); - - /* Enable VGEN1, VGEN2, VDIG, VPLL */ - pmic_reg_read(p, REG_MODE_0, &val); - val |= VGEN1EN | VDIGEN | VGEN2EN | VPLLEN; - pmic_reg_write(p, REG_MODE_0, val); - - /* Configure VGEN3 and VCAM regulators to use external PNP */ - val = VGEN3CONFIG | VCAMCONFIG; - pmic_reg_write(p, REG_MODE_1, val); - udelay(200); - - /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ - val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | - VVIDEOEN | VAUDIOEN | VSDEN; - pmic_reg_write(p, REG_MODE_1, val); - - pmic_reg_read(p, REG_POWER_CTL2, &val); - val |= WDIRESET; - pmic_reg_write(p, REG_POWER_CTL2, val); - - udelay(2500); -} -#else -static inline void power_init(void) { } -#endif - -/* - * MMC configuration - */ -#ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR, 1}, - {MMC_SDHC2_BASE_ADDR, 1}, -}; - -static inline uint32_t efika_mmc_cd(void) -{ - if (machine_is_efikamx()) - return MX51_PIN_GPIO1_0; - else - return MX51_PIN_EIM_CS2; -} - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - uint32_t cd = efika_mmc_cd(); - int ret; - - if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - ret = !gpio_get_value(IOMUX_TO_GPIO(cd)); - else - ret = !gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ - int ret; - uint32_t cd = efika_mmc_cd(); - - /* SDHC1 is used on all revisions, setup control pins first */ - mxc_request_iomux(cd, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(cd, - PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE | - PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_NONE | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_GPIO1_1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_1, - PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE | - PAD_CTL_SRE_FAST); - - gpio_direction_input(IOMUX_TO_GPIO(cd)); - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1)); - - /* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */ - if (machine_is_efikasb() || (machine_is_efikamx() && - (get_efika_rev() < EFIKAMX_BOARD_REV_12))) { - /* SDHC1 IOMUX */ - mxc_request_iomux(MX51_PIN_SD1_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CMD, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CLK, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, - PAD_CTL_PUE_KEEPER | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_HIGH | PAD_CTL_47K_PU | PAD_CTL_SRE_FAST); - - /* SDHC2 IOMUX */ - mxc_request_iomux(MX51_PIN_SD2_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD2_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD2_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_DATA0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_DATA1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_DATA2, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD2_DATA3, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - /* SDHC2 Control lines IOMUX */ - mxc_request_iomux(MX51_PIN_GPIO1_7, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_7, - PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE | - PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_NONE | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_GPIO1_8, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_8, - PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE | - PAD_CTL_SRE_FAST); - - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); - gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7)); - - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); - if (!ret) - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]); - } else { /* New boards use only SDHC1 */ - /* SDHC1 IOMUX */ - mxc_request_iomux(MX51_PIN_SD1_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - mxc_request_iomux(MX51_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | PAD_CTL_SRE_FAST); - - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); - } - - return ret; -} -#endif - -/* - * ATA - */ -#ifdef CONFIG_MX51_PATA -#define ATA_PAD_CONFIG (PAD_CTL_DRV_HIGH | PAD_CTL_DRV_VOT_HIGH) -void setup_iomux_ata(void) -{ - mxc_request_iomux(MX51_PIN_NANDF_ALE, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_ALE, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_RE_B, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RE_B, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_WE_B, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_WE_B, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_CLE, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_CLE, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_RB0, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB0, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_WP_B, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_WP_B, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_GPIO_NAND, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_GPIO_NAND, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_RB1, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB1, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D0, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D0, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D1, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D1, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D2, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D2, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D3, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D3, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D4, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D4, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D5, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D5, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D6, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D6, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D7, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D7, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D8, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D9, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D10, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D11, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D12, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D12, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D13, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D14, ATA_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_D15, ATA_PAD_CONFIG); -} -#else -static inline void setup_iomux_ata(void) { } -#endif - -/* - * EHCI USB - */ -#ifdef CONFIG_CMD_USB -extern void setup_iomux_usb(void); -#else -static inline void setup_iomux_usb(void) { } -#endif - -/* - * LED configuration - */ -void setup_iomux_led(void) -{ - if (machine_is_efikamx()) { - /* Blue LED */ - mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3); - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0); - - /* Green LED */ - mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3); - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0); - - /* Red LED */ - mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3); - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0); - } else { - /* CAPS-LOCK LED */ - mxc_request_iomux(MX51_PIN_EIM_CS0, IOMUX_CONFIG_GPIO); - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0), 0); - - /* ALARM-LED LED */ - mxc_request_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_GPIO); - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), 0); - } -} - -void efikamx_toggle_led(uint32_t mask) -{ - if (machine_is_efikamx()) { - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), - mask & EFIKAMX_LED_BLUE); - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), - mask & EFIKAMX_LED_GREEN); - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), - mask & EFIKAMX_LED_RED); - } else { - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0), - mask & EFIKAMX_LED_BLUE); - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), - !(mask & EFIKAMX_LED_GREEN)); - } -} - -/* - * Board initialization - */ -static void init_drive_strength(void) -{ - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS, - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS, - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM); - - /* Setting pad options */ - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); -} - -int board_early_init_f(void) -{ - init_drive_strength(); - - setup_iomux_uart(); - setup_iomux_spi(); - setup_iomux_led(); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - return 0; -} - -int board_late_init(void) -{ - setup_iomux_spi(); - - power_init(); - - setup_iomux_led(); - setup_iomux_ata(); - setup_iomux_usb(); - - if (machine_is_efikasb()) - setenv("preboot", "usb reset ; setenv stdin usbkbd\0"); - - setup_iomux_led(); - - efikamx_toggle_led(EFIKAMX_LED_BLUE); - - return 0; -} - -int checkboard(void) -{ - u32 rev = get_efika_rev(); - - if (machine_is_efikamx()) { - printf("Board: Efika MX, rev1.%i\n", rev & 0xf); - return 0; - } else { - switch (rev) { - case EFIKASB_BOARD_REV_13: - printf("Board: Efika SB rev1.3\n"); - break; - case EFIKASB_BOARD_REV_20: - printf("Board: Efika SB rev2.0\n"); - break; - default: - printf("Board: Efika SB, rev Unknown\n"); - break; - } - } - - return 0; -} diff --git a/board/enbw/enbw_cmc/enbw_cmc.c b/board/enbw/enbw_cmc/enbw_cmc.c index 67d5d4d6e5..3d2fe73a44 100644 --- a/board/enbw/enbw_cmc/enbw_cmc.c +++ b/board/enbw/enbw_cmc/enbw_cmc.c @@ -451,25 +451,15 @@ static char *enbw_cmc_getvalue(char *ptr, int *value) return ptr; } -static int enbw_cmc_config_switch(unsigned long addr) +static struct spi_slave *enbw_cmc_init_spi(void) { struct spi_slave *spi; - char *ptr = (char *)addr; - int value, reg; int ret; - int bus, cs, max_hz, spi_mode; - - debug("configure switch with file on addr: 0x%lx\n", addr); - bus = 0; - cs = 0; - max_hz = 1000000; - spi_mode = 0; - - spi = spi_setup_slave(bus, cs, max_hz, spi_mode); + spi = spi_setup_slave(0, 0, 1000000, 0); if (!spi) { printf("Failed to set up slave\n"); - return -EINVAL; + return NULL; } ret = spi_claim_bus(spi); @@ -480,25 +470,45 @@ static int enbw_cmc_config_switch(unsigned long addr) ret = enbw_cmc_switch_read_ident(spi); if (ret) - goto err_claim_bus; + goto err_read; + + return spi; +err_read: + spi_release_bus(spi); +err_claim_bus: + spi_free_slave(spi); + return NULL; +} + +static int enbw_cmc_config_switch(unsigned long addr) +{ + struct spi_slave *spi; + char *ptr = (char *)addr; + int value, reg; + int ret = 0; + + debug("configure switch with file on addr: 0x%lx\n", addr); + + spi = enbw_cmc_init_spi(); + if (!spi) + return -EINVAL; - ptr = (char *)addr; while (ptr != NULL) { ptr = enbw_cmc_getvalue(ptr, ®); if (ptr != NULL) { ptr = enbw_cmc_getvalue(ptr, &value); if ((ptr != NULL) && (value >= 0)) - if (enbw_cmc_switch_write(spi, reg, value)) - goto err_read; + if (enbw_cmc_switch_write(spi, reg, value)) { + /* error writing to switch */ + ptr = NULL; + ret = -EINVAL; + } } } - return 0; -err_read: spi_release_bus(spi); -err_claim_bus: spi_free_slave(spi); - return -EINVAL; + return ret; } static int do_switch(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) @@ -524,8 +534,10 @@ U_BOOT_CMD(switch, 3, 1, do_switch, */ int board_eth_init(bd_t *bis) { + struct spi_slave *spi; const char *s; - size_t len; + size_t len = 0; + int config = 1; davinci_emac_mii_mode_sel(0); @@ -534,25 +546,49 @@ int board_eth_init(bd_t *bis) if (len) { unsigned long addr = simple_strtoul(s, NULL, 16); - enbw_cmc_config_switch(addr); + config = enbw_cmc_config_switch(addr); } + if (config) { + /* + * no valid config file -> do we have some args in + * hwconfig ? + */ + if ((hwconfig_subarg("switch", "lan", &len)) || + (hwconfig_subarg("switch", "lmn", &len))) { + /* If so start switch */ + spi = enbw_cmc_init_spi(); + if (spi) { + if (enbw_cmc_switch_write(spi, 1, 0)) + config = 0; + udelay(10000); + if (enbw_cmc_switch_write(spi, 1, 1)) + config = 0; + spi_release_bus(spi); + spi_free_slave(spi); + } + } else { + config = 0; + } + } if (!davinci_emac_initialize()) { printf("Error: Ethernet init failed!\n"); return -1; } - if (hwconfig_subarg_cmp("switch", "lan", "on")) - /* Switch port lan on */ - enbw_cmc_switch(1, 1); - else - enbw_cmc_switch(1, 0); + if (config) { + if (hwconfig_subarg_cmp("switch", "lan", "on")) + /* Switch port lan on */ + enbw_cmc_switch(1, 1); + else + enbw_cmc_switch(1, 0); - if (hwconfig_subarg_cmp("switch", "pwl", "on")) - /* Switch port pwl on */ - enbw_cmc_switch(2, 1); - else - enbw_cmc_switch(2, 0); + if (hwconfig_subarg_cmp("switch", "lmn", "on")) + /* Switch port pwl on */ + enbw_cmc_switch(2, 1); + else + enbw_cmc_switch(2, 0); + } return 0; } diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c index 9ecf31d7c2..e947330a10 100644 --- a/board/esg/ima3-mx53/ima3-mx53.c +++ b/board/esg/ima3-mx53/ima3-mx53.c @@ -172,7 +172,7 @@ static void setup_iomux_fec(void) } #ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR, 1 }; +struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR }; int board_mmc_getcd(struct mmc *mmc) { diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c index f654f87b72..c74c3fc567 100644 --- a/board/eukrea/cpuat91/cpuat91.c +++ b/board/eukrea/cpuat91/cpuat91.c @@ -43,8 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; int board_init(void) { - /* Enable Ctrlc */ - console_init_f(); /* arch number of CPUAT91-Board */ gd->bd->bi_arch_number = MACH_TYPE_CPUAT91; /* adress of boot parameters */ diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c index 40d8cf6097..16a6d8ad23 100644 --- a/board/freescale/mx28evk/iomux.c +++ b/board/freescale/mx28evk/iomux.c @@ -180,5 +180,5 @@ void mx28_adjust_memory_params(uint32_t *dram_vals) void board_init_ll(void) { - mx28_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); + mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); } diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c index 1bc83e9603..867d3c8518 100644 --- a/board/freescale/mx28evk/mx28evk.c +++ b/board/freescale/mx28evk/mx28evk.c @@ -64,7 +64,7 @@ int board_early_init_f(void) int dram_init(void) { - return mx28_dram_init(); + return mxs_dram_init(); } int board_init(void) @@ -115,8 +115,8 @@ int fecmxc_mii_postcall(int phy) int board_eth_init(bd_t *bis) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; struct eth_device *dev; int ret; diff --git a/board/freescale/mx28evk/u-boot.bd b/board/freescale/mx28evk/u-boot.bd deleted file mode 100644 index c60615a456..0000000000 --- a/board/freescale/mx28evk/u-boot.bd +++ /dev/null @@ -1,14 +0,0 @@ -sources { - u_boot_spl="spl/u-boot-spl.bin"; - u_boot="u-boot.bin"; -} - -section (0) { - load u_boot_spl > 0x0000; - load ivt (entry = 0x0014) > 0x8000; - hab call 0x8000; - - load u_boot > 0x40000100; - load ivt (entry = 0x40000100) > 0x8000; - hab call 0x8000; -} diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index bc415b8462..787c9232d2 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -168,7 +168,7 @@ int board_early_init_f(void) /* enable clocks */ writel(readl(&ccm->cgr0) | MXC_CCM_CGR0_EMI_MASK | - MXC_CCM_CGR0_EDI0_MASK | + MXC_CCM_CGR0_EDIO_MASK | MXC_CCM_CGR0_EPIT1_MASK, &ccm->cgr0); diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 514a7ac2ad..7a0682a7e9 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -39,16 +39,16 @@ #include <linux/fb.h> #include <ipu_pixfmt.h> -#define MX51EVK_LCD_3V3 (3 * 32 + 9) /* GPIO4_9 */ -#define MX51EVK_LCD_5V (3 * 32 + 10) /* GPIO4_10 */ -#define MX51EVK_LCD_BACKLIGHT (2 * 32 + 4) /* GPIO3_4 */ +#define MX51EVK_LCD_3V3 IMX_GPIO_NR(4, 9) +#define MX51EVK_LCD_5V IMX_GPIO_NR(4, 10) +#define MX51EVK_LCD_BACKLIGHT IMX_GPIO_NR(3, 4) DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR, 1}, - {MMC_SDHC2_BASE_ADDR, 1}, + {MMC_SDHC1_BASE_ADDR}, + {MMC_SDHC2_BASE_ADDR}, }; #endif @@ -319,11 +319,11 @@ static void power_init(void) pmic_reg_write(p, REG_MODE_1, val); mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1); - gpio_direction_output(46, 0); + gpio_direction_output(IMX_GPIO_NR(2, 14), 0); udelay(500); - gpio_set_value(46, 1); + gpio_set_value(IMX_GPIO_NR(2, 14), 1); } #ifdef CONFIG_FSL_ESDHC @@ -333,14 +333,14 @@ int board_mmc_getcd(struct mmc *mmc) int ret; mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1); - gpio_direction_input(0); + gpio_direction_input(IMX_GPIO_NR(1, 0)); mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); - gpio_direction_input(6); + gpio_direction_input(IMX_GPIO_NR(1, 6)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - ret = !gpio_get_value(0); + ret = !gpio_get_value(IMX_GPIO_NR(1, 0)); else - ret = !gpio_get_value(6); + ret = !gpio_get_value(IMX_GPIO_NR(1, 6)); return ret; } @@ -536,12 +536,20 @@ int board_late_init(void) setup_iomux_spi(); power_init(); #endif - setenv("stdout", "serial"); return 0; } #endif +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + int checkboard(void) { puts("Board: MX51EVK\n"); diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index 2d21584b33..08c779559a 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -33,7 +33,7 @@ #include <fsl_esdhc.h> #include <asm/gpio.h> -#define ETHERNET_INT (1 * 32 + 31) /* GPIO2_31 */ +#define ETHERNET_INT IMX_GPIO_NR(2, 31) DECLARE_GLOBAL_DATA_PTR; @@ -79,8 +79,8 @@ static void setup_iomux_uart(void) #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR, 1 }, - {MMC_SDHC2_BASE_ADDR, 1 }, + {MMC_SDHC1_BASE_ADDR}, + {MMC_SDHC2_BASE_ADDR}, }; int board_mmc_getcd(struct mmc *mmc) @@ -89,14 +89,14 @@ int board_mmc_getcd(struct mmc *mmc) int ret; mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1); - gpio_direction_input(1); + gpio_direction_input(IMX_GPIO_NR(1, 1)); mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1); - gpio_direction_input(4); + gpio_direction_input(IMX_GPIO_NR(1, 4)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - ret = !gpio_get_value(1); /* GPIO1_1 */ + ret = !gpio_get_value(IMX_GPIO_NR(1, 1)); else - ret = !gpio_get_value(4); /* GPIO1_4 */ + ret = !gpio_get_value(IMX_GPIO_NR(1, 4)); return ret; } diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index 8a6e31d9b1..b11a94c652 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -28,6 +28,7 @@ #include <asm/arch/crm_regs.h> #include <asm/arch/iomux.h> #include <asm/errno.h> +#include <asm/imx-common/boot_mode.h> #include <netdev.h> #include <i2c.h> #include <mmc.h> @@ -204,8 +205,8 @@ static void setup_iomux_fec(void) #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR, 1}, - {MMC_SDHC3_BASE_ADDR, 1}, + {MMC_SDHC1_BASE_ADDR}, + {MMC_SDHC3_BASE_ADDR}, }; int board_mmc_getcd(struct mmc *mmc) @@ -214,14 +215,14 @@ int board_mmc_getcd(struct mmc *mmc) int ret; mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); - gpio_direction_input(75); + gpio_direction_input(IMX_GPIO_NR(3, 11)); mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); - gpio_direction_input(77); + gpio_direction_input(IMX_GPIO_NR(3, 13)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - ret = !gpio_get_value(77); /* GPIO3_13 */ + ret = !gpio_get_value(IMX_GPIO_NR(3, 13)); else - ret = !gpio_get_value(75); /* GPIO3_11 */ + ret = !gpio_get_value(IMX_GPIO_NR(3, 11)); return ret; } @@ -367,11 +368,23 @@ int board_init(void) return 0; } +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"mmc0", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)}, + {"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)}, + {NULL, 0}, +}; +#endif + int board_late_init(void) { setup_i2c(1); power_init(); +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif return 0; } diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index cbdcfadf27..8f82125590 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -42,7 +42,7 @@ #include <linux/fb.h> #include <ipu_pixfmt.h> -#define MX53LOCO_LCD_POWER (2 * 32 + 24) /* GPIO3_24 */ +#define MX53LOCO_LCD_POWER IMX_GPIO_NR(3, 24) DECLARE_GLOBAL_DATA_PTR; @@ -165,8 +165,8 @@ static void setup_iomux_fec(void) #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC1_BASE_ADDR, 1}, - {MMC_SDHC3_BASE_ADDR, 1}, + {MMC_SDHC1_BASE_ADDR}, + {MMC_SDHC3_BASE_ADDR}, }; int board_mmc_getcd(struct mmc *mmc) @@ -175,14 +175,14 @@ int board_mmc_getcd(struct mmc *mmc) int ret; mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); - gpio_direction_input(75); + gpio_direction_input(IMX_GPIO_NR(3, 11)); mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); - gpio_direction_input(77); + gpio_direction_input(IMX_GPIO_NR(3, 13)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - ret = !gpio_get_value(77); /* GPIO3_13 */ + ret = !gpio_get_value(IMX_GPIO_NR(3, 13)); else - ret = !gpio_get_value(75); /* GPIO3_11 */ + ret = !gpio_get_value(IMX_GPIO_NR(3, 11)); return ret; } @@ -495,14 +495,14 @@ int print_cpuinfo(void) return 0; } -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) { - setenv("stdout", "serial"); - - return 0; + return 1; } -#endif int board_init(void) { diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index c2379804ac..7f35dddb84 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -129,14 +129,14 @@ static void setup_iomux_fec(void) #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg esdhc_cfg[1] = { - {MMC_SDHC1_BASE_ADDR, 1}, + {MMC_SDHC1_BASE_ADDR}, }; int board_mmc_getcd(struct mmc *mmc) { mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); - gpio_direction_input(77); - return !gpio_get_value(77); /* GPIO3_13 */ + gpio_direction_input(IMX_GPIO_NR(3, 13)); + return !gpio_get_value(IMX_GPIO_NR(3, 13)); } int board_mmc_init(bd_t *bis) diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index 340c4c4393..d43b3271b8 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -116,8 +116,8 @@ static void setup_iomux_enet(void) #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg usdhc_cfg[2] = { - {USDHC3_BASE_ADDR, 1}, - {USDHC4_BASE_ADDR, 1}, + {USDHC3_BASE_ADDR}, + {USDHC4_BASE_ADDR}, }; int board_mmc_getcd(struct mmc *mmc) @@ -126,8 +126,8 @@ int board_mmc_getcd(struct mmc *mmc) int ret; if (cfg->esdhc_base == USDHC3_BASE_ADDR) { - gpio_direction_input(171); /*GPIO6_11*/ - ret = !gpio_get_value(171); + gpio_direction_input(IMX_GPIO_NR(6, 11)); + ret = !gpio_get_value(IMX_GPIO_NR(6, 11)); } else /* Don't have the CD GPIO pin on board */ ret = 1; diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 01e508354a..909ccca11e 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -24,11 +24,13 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> #include <asm/arch/mx6x_pins.h> #include <asm/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> #include <asm/imx-common/mxc_i2c.h> +#include <asm/imx-common/boot_mode.h> #include <mmc.h> #include <fsl_esdhc.h> #include <micrel.h> @@ -85,12 +87,12 @@ struct i2c_pads_info i2c_pad_info0 = { .scl = { .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC, .gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC, - .gp = GPIO_NUMBER(3, 21) + .gp = IMX_GPIO_NR(3, 21) }, .sda = { .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC, .gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC, - .gp = GPIO_NUMBER(3, 28) + .gp = IMX_GPIO_NR(3, 28) } }; @@ -99,12 +101,12 @@ struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC, .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC, - .gp = GPIO_NUMBER(4, 12) + .gp = IMX_GPIO_NR(4, 12) }, .sda = { .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC, .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC, - .gp = GPIO_NUMBER(4, 13) + .gp = IMX_GPIO_NR(4, 13) } }; @@ -113,12 +115,12 @@ struct i2c_pads_info i2c_pad_info2 = { .scl = { .i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC, .gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC, - .gp = GPIO_NUMBER(1, 5) + .gp = IMX_GPIO_NR(1, 5) }, .sda = { .i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC, .gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC, - .gp = GPIO_NUMBER(7, 11) + .gp = IMX_GPIO_NR(7, 11) } }; @@ -227,9 +229,9 @@ int board_ehci_hcd_init(int port) imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); /* Reset USB hub */ - gpio_direction_output(GPIO_NUMBER(7, 12), 0); + gpio_direction_output(IMX_GPIO_NR(7, 12), 0); mdelay(2); - gpio_set_value(GPIO_NUMBER(7, 12), 1); + gpio_set_value(IMX_GPIO_NR(7, 12), 1); return 0; } @@ -237,8 +239,8 @@ int board_ehci_hcd_init(int port) #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg usdhc_cfg[2] = { - {USDHC3_BASE_ADDR, 1}, - {USDHC4_BASE_ADDR, 1}, + {USDHC3_BASE_ADDR}, + {USDHC4_BASE_ADDR}, }; int board_mmc_getcd(struct mmc *mmc) @@ -411,12 +413,12 @@ struct button_key { }; static struct button_key const buttons[] = { - {"back", GPIO_NUMBER(2, 2), 'B'}, - {"home", GPIO_NUMBER(2, 4), 'H'}, - {"menu", GPIO_NUMBER(2, 1), 'M'}, - {"search", GPIO_NUMBER(2, 3), 'S'}, - {"volup", GPIO_NUMBER(7, 13), 'V'}, - {"voldown", GPIO_NUMBER(4, 5), 'v'}, + {"back", IMX_GPIO_NR(2, 2), 'B'}, + {"home", IMX_GPIO_NR(2, 4), 'H'}, + {"menu", IMX_GPIO_NR(2, 1), 'M'}, + {"search", IMX_GPIO_NR(2, 3), 'S'}, + {"volup", IMX_GPIO_NR(7, 13), 'V'}, + {"voldown", IMX_GPIO_NR(4, 5), 'v'}, }; /* @@ -487,10 +489,23 @@ static void preboot_keys(void) } #endif +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {"mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + int misc_init_r(void) { #ifdef CONFIG_PREBOOT preboot_keys(); #endif + +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif return 0; } diff --git a/board/efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile index bd2174fec3..bd2174fec3 100644 --- a/board/efikamx/Makefile +++ b/board/genesi/mx51_efikamx/Makefile diff --git a/board/efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c index 618b39d142..e9273d027a 100644 --- a/board/efikamx/efikamx-usb.c +++ b/board/genesi/mx51_efikamx/efikamx-usb.c @@ -33,7 +33,7 @@ #include <usb/ulpi.h> #include <errno.h> -#include "../../drivers/usb/host/ehci.h" +#include "../../../drivers/usb/host/ehci.h" /* USB pin configuration */ #define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \ diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c new file mode 100644 index 0000000000..6d98c94db9 --- /dev/null +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -0,0 +1,512 @@ +/* + * Copyright (C) 2009 Freescale Semiconductor, Inc. + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * Copyright (C) 2009-2012 Genesi USA, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/iomux-mx51.h> +#include <asm/gpio.h> +#include <asm/errno.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/crm_regs.h> +#include <i2c.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <pmic.h> +#include <fsl_pmic.h> +#include <mc13892.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Compile-time error checking + */ +#ifndef CONFIG_MXC_SPI +#error "CONFIG_MXC_SPI not set, this is essential for board's operation!" +#endif + +/* + * Board revisions + * + * Note that we get these revisions here for convenience, but we only set + * up for the production model Smarttop (1.3) and Smartbook (2.0). + * + */ +#define EFIKAMX_BOARD_REV_11 0x1 +#define EFIKAMX_BOARD_REV_12 0x2 +#define EFIKAMX_BOARD_REV_13 0x3 +#define EFIKAMX_BOARD_REV_14 0x4 + +#define EFIKASB_BOARD_REV_13 0x1 +#define EFIKASB_BOARD_REV_20 0x2 + +/* + * Board identification + */ +static u32 get_mx_rev(void) +{ + u32 rev = 0; + /* + * Retrieve board ID: + * + * gpio: 16 17 11 + * ============== + * r1.1: 1+ 1 1 + * r1.2: 1 1 0 + * r1.3: 1 0 1 + * r1.4: 1 0 0 + * + * + note: r1.1 does not strap this pin properly so it needs to + * be hacked or ignored. + */ + + /* set to 1 in order to get correct value on board rev 1.1 */ + gpio_direction_output(IMX_GPIO_NR(3, 16), 1); + gpio_direction_input(IMX_GPIO_NR(3, 11)); + gpio_direction_input(IMX_GPIO_NR(3, 16)); + gpio_direction_input(IMX_GPIO_NR(3, 17)); + + rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 16))) << 0; + rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 17))) << 1; + rev |= (!!gpio_get_value(IMX_GPIO_NR(3, 11))) << 2; + + return (~rev & 0x7) + 1; +} + +static iomux_v3_cfg_t efikasb_revision_pads[] = { + MX51_PAD_EIM_CS3__GPIO2_28, + MX51_PAD_EIM_CS4__GPIO2_29, +}; + +static inline u32 get_sb_rev(void) +{ + u32 rev = 0; + + imx_iomux_v3_setup_multiple_pads(efikasb_revision_pads, + ARRAY_SIZE(efikasb_revision_pads)); + gpio_direction_input(IMX_GPIO_NR(2, 28)); + gpio_direction_input(IMX_GPIO_NR(2, 29)); + + rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 28))) << 0; + rev |= (!!gpio_get_value(IMX_GPIO_NR(2, 29))) << 1; + + return rev; +} + +inline uint32_t get_efikamx_rev(void) +{ + if (machine_is_efikamx()) + return get_mx_rev(); + else if (machine_is_efikasb()) + return get_sb_rev(); +} + +u32 get_board_rev(void) +{ + return get_cpu_rev() | (get_efikamx_rev() << 8); +} + +/* + * DRAM initialization + */ +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + PHYS_SDRAM_1_SIZE); + return 0; +} + +/* + * UART configuration + */ +static iomux_v3_cfg_t efikamx_uart_pads[] = { + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, +}; + +/* + * SPI configuration + */ +static iomux_v3_cfg_t efikamx_spi_pads[] = { + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, + MX51_PAD_CSPI1_MISO__ECSPI1_MISO, + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + MX51_PAD_CSPI1_SS0__GPIO4_24, + MX51_PAD_CSPI1_SS1__GPIO4_25, + MX51_PAD_GPIO1_6__GPIO1_6, +}; + +#define EFIKAMX_SPI_SS0 IMX_GPIO_NR(4, 24) +#define EFIKAMX_SPI_SS1 IMX_GPIO_NR(4, 25) +#define EFIKAMX_PMIC_IRQ IMX_GPIO_NR(1, 6) + +/* + * PMIC configuration + */ +#ifdef CONFIG_MXC_SPI +static void power_init(void) +{ + unsigned int val; + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; + struct pmic *p; + + pmic_init(); + p = get_pmic(); + + /* Write needed to Power Gate 2 register */ + pmic_reg_read(p, REG_POWER_MISC, &val); + val &= ~PWGT2SPIEN; + pmic_reg_write(p, REG_POWER_MISC, val); + + /* Externally powered */ + pmic_reg_read(p, REG_CHARGE, &val); + val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB; + pmic_reg_write(p, REG_CHARGE, val); + + /* power up the system first */ + pmic_reg_write(p, REG_POWER_MISC, PWUP); + + /* Set core voltage to 1.1V */ + pmic_reg_read(p, REG_SW_0, &val); + val = (val & ~SWx_VOLT_MASK) | SWx_1_100V; + pmic_reg_write(p, REG_SW_0, val); + + /* Setup VCC (SW2) to 1.25 */ + pmic_reg_read(p, REG_SW_1, &val); + val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; + pmic_reg_write(p, REG_SW_1, val); + + /* Setup 1V2_DIG1 (SW3) to 1.25 */ + pmic_reg_read(p, REG_SW_2, &val); + val = (val & ~SWx_VOLT_MASK) | SWx_1_250V; + pmic_reg_write(p, REG_SW_2, val); + udelay(50); + + /* Raise the core frequency to 800MHz */ + writel(0x0, &mxc_ccm->cacrr); + + /* Set switchers in Auto in NORMAL mode & STANDBY mode */ + /* Setup the switcher mode for SW1 & SW2*/ + pmic_reg_read(p, REG_SW_4, &val); + val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | + (SWMODE_MASK << SWMODE2_SHIFT))); + val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | + (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); + pmic_reg_write(p, REG_SW_4, val); + + /* Setup the switcher mode for SW3 & SW4 */ + pmic_reg_read(p, REG_SW_5, &val); + val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) | + (SWMODE_MASK << SWMODE4_SHIFT))); + val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) | + (SWMODE_AUTO_AUTO << SWMODE4_SHIFT); + pmic_reg_write(p, REG_SW_5, val); + + /* Set VDIG to 1.8V, VGEN3 to 1.8V, VCAM to 2.6V */ + pmic_reg_read(p, REG_SETTING_0, &val); + val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK); + val |= VDIG_1_8 | VGEN3_1_8 | VCAM_2_6; + pmic_reg_write(p, REG_SETTING_0, val); + + /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ + pmic_reg_read(p, REG_SETTING_1, &val); + val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); + val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775 | VGEN1_1_2 | VGEN2_3_15; + pmic_reg_write(p, REG_SETTING_1, val); + + /* Enable VGEN1, VGEN2, VDIG, VPLL */ + pmic_reg_read(p, REG_MODE_0, &val); + val |= VGEN1EN | VDIGEN | VGEN2EN | VPLLEN; + pmic_reg_write(p, REG_MODE_0, val); + + /* Configure VGEN3 and VCAM regulators to use external PNP */ + val = VGEN3CONFIG | VCAMCONFIG; + pmic_reg_write(p, REG_MODE_1, val); + udelay(200); + + /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ + val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | + VVIDEOEN | VAUDIOEN | VSDEN; + pmic_reg_write(p, REG_MODE_1, val); + + pmic_reg_read(p, REG_POWER_CTL2, &val); + val |= WDIRESET; + pmic_reg_write(p, REG_POWER_CTL2, val); + + udelay(2500); +} +#else +static inline void power_init(void) { } +#endif + +/* + * MMC configuration + */ +#ifdef CONFIG_FSL_ESDHC + +struct fsl_esdhc_cfg esdhc_cfg[2] = { + {MMC_SDHC1_BASE_ADDR}, + {MMC_SDHC2_BASE_ADDR}, +}; + +static iomux_v3_cfg_t efikamx_sdhc1_pads[] = { + MX51_PAD_SD1_CMD__SD1_CMD, + MX51_PAD_SD1_CLK__SD1_CLK, + MX51_PAD_SD1_DATA0__SD1_DATA0, + MX51_PAD_SD1_DATA1__SD1_DATA1, + MX51_PAD_SD1_DATA2__SD1_DATA2, + MX51_PAD_SD1_DATA3__SD1_DATA3, + MX51_PAD_GPIO1_1__SD1_WP, +}; + +#define EFIKAMX_SDHC1_WP IMX_GPIO_NR(1, 1) + +static iomux_v3_cfg_t efikamx_sdhc1_cd_pads[] = { + MX51_PAD_GPIO1_0__SD1_CD, + MX51_PAD_EIM_CS2__SD1_CD, +}; + +#define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0) +#define EFIKASB_SDHC1_CD IMX_GPIO_NR(2, 27) + +static iomux_v3_cfg_t efikasb_sdhc2_pads[] = { + MX51_PAD_SD2_CMD__SD2_CMD, + MX51_PAD_SD2_CLK__SD2_CLK, + MX51_PAD_SD2_DATA0__SD2_DATA0, + MX51_PAD_SD2_DATA1__SD2_DATA1, + MX51_PAD_SD2_DATA2__SD2_DATA2, + MX51_PAD_SD2_DATA3__SD2_DATA3, + MX51_PAD_GPIO1_7__SD2_WP, + MX51_PAD_GPIO1_8__SD2_CD, +}; + +#define EFIKASB_SDHC2_CD IMX_GPIO_NR(1, 8) +#define EFIKASB_SDHC2_WP IMX_GPIO_NR(1, 7) + +static inline uint32_t efikamx_mmc_getcd(u32 base) +{ + if (base == MMC_SDHC1_BASE_ADDR) + if (machine_is_efikamx()) + return EFIKAMX_SDHC1_CD; + else + return EFIKASB_SDHC1_CD; + else + return EFIKASB_SDHC2_CD; +} + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + uint32_t cd = efikamx_mmc_getcd(cfg->esdhc_base); + int ret = !gpio_get_value(cd); + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ + int ret; + + /* + * All Efika MX boards use eSDHC1 with a common write-protect GPIO + */ + imx_iomux_v3_setup_multiple_pads(efikamx_sdhc1_pads, + ARRAY_SIZE(efikamx_sdhc1_pads)); + gpio_direction_input(EFIKAMX_SDHC1_WP); + + /* + * Smartbook and Smarttop differ on the location of eSDHC1 + * carrier-detect GPIO + */ + if (machine_is_efikamx()) { + imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[0]); + gpio_direction_input(EFIKAMX_SDHC1_CD); + } else if (machine_is_efikasb()) { + imx_iomux_v3_setup_pad(efikamx_sdhc1_cd_pads[1]); + gpio_direction_input(EFIKASB_SDHC1_CD); + } + + ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); + + if (machine_is_efikasb()) { + + imx_iomux_v3_setup_multiple_pads(efikasb_sdhc2_pads, + ARRAY_SIZE(efikasb_sdhc2_pads)); + gpio_direction_input(EFIKASB_SDHC2_CD); + gpio_direction_input(EFIKASB_SDHC2_WP); + if (!ret) + ret = fsl_esdhc_initialize(bis, &esdhc_cfg[1]); + } + + return ret; +} +#endif + +/* + * PATA + */ +static iomux_v3_cfg_t efikamx_pata_pads[] = { + MX51_PAD_NANDF_WE_B__PATA_DIOW, + MX51_PAD_NANDF_RE_B__PATA_DIOR, + MX51_PAD_NANDF_ALE__PATA_BUFFER_EN, + MX51_PAD_NANDF_CLE__PATA_RESET_B, + MX51_PAD_NANDF_WP_B__PATA_DMACK, + MX51_PAD_NANDF_RB0__PATA_DMARQ, + MX51_PAD_NANDF_RB1__PATA_IORDY, + MX51_PAD_GPIO_NAND__PATA_INTRQ, + MX51_PAD_NANDF_CS2__PATA_CS_0, + MX51_PAD_NANDF_CS3__PATA_CS_1, + MX51_PAD_NANDF_CS4__PATA_DA_0, + MX51_PAD_NANDF_CS5__PATA_DA_1, + MX51_PAD_NANDF_CS6__PATA_DA_2, + MX51_PAD_NANDF_D15__PATA_DATA15, + MX51_PAD_NANDF_D14__PATA_DATA14, + MX51_PAD_NANDF_D13__PATA_DATA13, + MX51_PAD_NANDF_D12__PATA_DATA12, + MX51_PAD_NANDF_D11__PATA_DATA11, + MX51_PAD_NANDF_D10__PATA_DATA10, + MX51_PAD_NANDF_D9__PATA_DATA9, + MX51_PAD_NANDF_D8__PATA_DATA8, + MX51_PAD_NANDF_D7__PATA_DATA7, + MX51_PAD_NANDF_D6__PATA_DATA6, + MX51_PAD_NANDF_D5__PATA_DATA5, + MX51_PAD_NANDF_D4__PATA_DATA4, + MX51_PAD_NANDF_D3__PATA_DATA3, + MX51_PAD_NANDF_D2__PATA_DATA2, + MX51_PAD_NANDF_D1__PATA_DATA1, + MX51_PAD_NANDF_D0__PATA_DATA0, +}; + +/* + * EHCI USB + */ +#ifdef CONFIG_CMD_USB +extern void setup_iomux_usb(void); +#else +static inline void setup_iomux_usb(void) { } +#endif + +/* + * LED configuration + * + * Smarttop LED pad config is done in the DCD + * + */ +#define EFIKAMX_LED_BLUE IMX_GPIO_NR(3, 13) +#define EFIKAMX_LED_GREEN IMX_GPIO_NR(3, 14) +#define EFIKAMX_LED_RED IMX_GPIO_NR(3, 15) + +static iomux_v3_cfg_t efikasb_led_pads[] = { + MX51_PAD_GPIO1_3__GPIO1_3, + MX51_PAD_EIM_CS0__GPIO2_25, +}; + +#define EFIKASB_CAPSLOCK_LED IMX_GPIO_NR(2, 25) +#define EFIKASB_MESSAGE_LED IMX_GPIO_NR(1, 3) /* Note: active low */ + +/* + * Board initialization + */ +int board_early_init_f(void) +{ + if (machine_is_efikasb()) { + imx_iomux_v3_setup_multiple_pads(efikasb_led_pads, + ARRAY_SIZE(efikasb_led_pads)); + gpio_direction_output(EFIKASB_CAPSLOCK_LED, 0); + gpio_direction_output(EFIKASB_MESSAGE_LED, 1); + } else if (machine_is_efikamx()) { + /* + * Set up GPIO directions for LEDs. + * IOMUX has been done in the DCD already. + * Turn the red LED on for pre-relocation code. + */ + gpio_direction_output(EFIKAMX_LED_BLUE, 0); + gpio_direction_output(EFIKAMX_LED_GREEN, 0); + gpio_direction_output(EFIKAMX_LED_RED, 1); + } + + /* + * Both these pad configurations for UART and SPI are kind of redundant + * since they are the Power-On Defaults for the i.MX51. But, it seems we + * should make absolutely sure that they are set up correctly. + */ + imx_iomux_v3_setup_multiple_pads(efikamx_uart_pads, + ARRAY_SIZE(efikamx_uart_pads)); + imx_iomux_v3_setup_multiple_pads(efikamx_spi_pads, + ARRAY_SIZE(efikamx_spi_pads)); + + /* not technically required for U-Boot operation but do it anyway. */ + gpio_direction_input(EFIKAMX_PMIC_IRQ); + /* Deselect both CS for now, otherwise NOR doesn't probe properly. */ + gpio_direction_output(EFIKAMX_SPI_SS0, 0); + gpio_direction_output(EFIKAMX_SPI_SS1, 1); + + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int board_late_init(void) +{ + if (machine_is_efikamx()) { + /* + * Set up Blue LED for "In U-Boot" status. + * We're all relocated and ready to U-Boot! + */ + gpio_set_value(EFIKAMX_LED_RED, 0); + gpio_set_value(EFIKAMX_LED_GREEN, 0); + gpio_set_value(EFIKAMX_LED_BLUE, 1); + } + + power_init(); + + imx_iomux_v3_setup_multiple_pads(efikamx_pata_pads, + ARRAY_SIZE(efikamx_pata_pads)); + setup_iomux_usb(); + + if (machine_is_efikasb()) + setenv("preboot", "usb reset ; setenv stdin usbkbd\0"); + + return 0; +} + +int checkboard(void) +{ + u32 rev = get_efikamx_rev(); + + printf("Board: Genesi Efika MX "); + if (machine_is_efikamx()) + printf("Smarttop (1.%i)\n", rev & 0xf); + else if (machine_is_efikasb()) + printf("Smartbook\n"); + + return 0; +} diff --git a/board/efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg index 6fe0ff9ac4..38fa760e4b 100644 --- a/board/efikamx/imximage_mx.cfg +++ b/board/genesi/mx51_efikamx/imximage_mx.cfg @@ -1,5 +1,7 @@ # +# Copyright (C) 2009 Pegatron Corporation # Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> +# Copyright (C) 2009-2012 Genesi USA, Inc. # # BASED ON: imx51evk # @@ -43,30 +45,32 @@ BOOT_FROM spi # Address absolute address of the register # value value to be stored in the register -# Setting IOMUXC -DATA 4 0x73fa88a0 0x000 -DATA 4 0x73fa850c 0x20c5 -DATA 4 0x73fa8510 0x20c5 -DATA 4 0x73fa883c 0x5 -DATA 4 0x73fa8848 0x5 -DATA 4 0x73fa84b8 0xe7 -DATA 4 0x73fa84bc 0x45 -DATA 4 0x73fa84c0 0x45 -DATA 4 0x73fa84c4 0x45 -DATA 4 0x73fa84c8 0x45 -DATA 4 0x73fa8820 0x0 -DATA 4 0x73fa84a4 0x5 -DATA 4 0x73fa84a8 0x5 -DATA 4 0x73fa84ac 0xe5 -DATA 4 0x73fa84b0 0xe5 -DATA 4 0x73fa84b4 0xe5 -DATA 4 0x73fa84cc 0xe5 -DATA 4 0x73fa84d0 0xe4 +# Essential GPIO settings to be done as early as possible +# PCBIDn pad settings are all the defaults except #2 which needs HVE off +DATA 4 0x73fa8134 0x3 # PCBID0 ALT3 GPIO 3_16 +DATA 4 0x73fa8130 0x3 # PCBID1 ALT3 GPIO 3_17 +DATA 4 0x73fa8128 0x3 # PCBID2 ALT3 GPIO 3_11 +DATA 4 0x73fa8504 0xe4 # PCBID2 PAD ~HVE +DATA 4 0x73fa8198 0x3 # LED0 ALT3 GPIO 3_13 +DATA 4 0x73fa81c4 0x3 # LED1 ALT3 GPIO 3_14 +DATA 4 0x73fa81c8 0x3 # LED2 ALT3 GPIO 3_15 -DATA 4 0x73fa882c 0x4 -DATA 4 0x73fa88a4 0x4 -DATA 4 0x73fa88ac 0x4 -DATA 4 0x73fa88b8 0x4 +# DDR bus IOMUX PAD settings +DATA 4 0x73fa850c 0x20c5 # SDODT1 +DATA 4 0x73fa8510 0x20c5 # SDODT0 +DATA 4 0x73fa84ac 0xc5 # SDWE +DATA 4 0x73fa84b0 0xc5 # SDCKE0 +DATA 4 0x73fa84b4 0xc5 # SDCKE1 +DATA 4 0x73fa84cc 0xc5 # DRAM_CS0 +DATA 4 0x73fa84d0 0xc5 # DRAM_CS1 +DATA 4 0x73fa882c 0x2 # DRAM_B4 +DATA 4 0x73fa88a4 0x2 # DRAM_B0 +DATA 4 0x73fa88ac 0x2 # DRAM_B1 +DATA 4 0x73fa88b8 0x2 # DRAM_B2 +DATA 4 0x73fa84d4 0xc5 # DRAM_DQM0 +DATA 4 0x73fa84d8 0xc5 # DRAM_DQM1 +DATA 4 0x73fa84dc 0xc5 # DRAM_DQM2 +DATA 4 0x73fa84e0 0xc5 # DRAM_DQM3 # Setting DDR for micron # 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model diff --git a/board/efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg index 878146f442..26d259f2c2 100644 --- a/board/efikamx/imximage_sb.cfg +++ b/board/genesi/mx51_efikamx/imximage_sb.cfg @@ -1,5 +1,7 @@ # +# Copyright (C) 2009 Pegatron Corporation # Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> +# Copyright (C) 2009-2012 Genesi USA, Inc. # # BASED ON: imx51evk # @@ -43,30 +45,22 @@ BOOT_FROM spi # Address absolute address of the register # value value to be stored in the register -# Setting IOMUXC -DATA 4 0x73fa88a0 0x200 -DATA 4 0x73fa850c 0x20c3 -DATA 4 0x73fa8510 0x20c3 -DATA 4 0x73fa883c 0x2 -DATA 4 0x73fa8848 0x2 -DATA 4 0x73fa84b8 0xe7 -DATA 4 0x73fa84bc 0x45 -DATA 4 0x73fa84c0 0x45 -DATA 4 0x73fa84c4 0x45 -DATA 4 0x73fa84c8 0x45 -DATA 4 0x73fa8820 0x0 -DATA 4 0x73fa84a4 0x5 -DATA 4 0x73fa84a8 0x5 -DATA 4 0x73fa84ac 0xe3 -DATA 4 0x73fa84b0 0xe3 -DATA 4 0x73fa84b4 0xe3 -DATA 4 0x73fa84cc 0xe3 -DATA 4 0x73fa84d0 0xe2 - -DATA 4 0x73fa882c 0x4 -DATA 4 0x73fa88a4 0x4 -DATA 4 0x73fa88ac 0x4 -DATA 4 0x73fa88b8 0x4 +# DDR bus IOMUX PAD settings +DATA 4 0x73fa88a0 0x200 # GRP_INMODE1 +DATA 4 0x73fa850c 0x20c5 # SDODT1 +DATA 4 0x73fa8510 0x20c5 # SDODT0 +DATA 4 0x73fa8848 0x4 # DDR_A1 +DATA 4 0x73fa84b8 0xe7 # DRAM_SDCLK +DATA 4 0x73fa84bc 0x45 # DRAM_SDQS0 +DATA 4 0x73fa84c0 0x45 # DRAM_SDQS1 +DATA 4 0x73fa84c4 0x45 # DRAM_SDQS2 +DATA 4 0x73fa84c8 0x45 # DRAM_SDQS3 +DATA 4 0x73fa8820 0x0 # DDRPKS +DATA 4 0x73fa84ac 0xe5 # SDWE +DATA 4 0x73fa84b0 0xe5 # SDCKE0 +DATA 4 0x73fa84b4 0xe5 # SDCKE1 +DATA 4 0x73fa84cc 0xe5 # DRAM_CS0 +DATA 4 0x73fa84d0 0xe4 # DRAM_CS1 # Setting DDR for micron # 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model @@ -108,7 +102,7 @@ DATA 4 0x83fd9014 0x00008014 DATA 4 0x83fd9014 0x00008014 DATA 4 0x83fd9014 0x0632801c DATA 4 0x83fd9014 0x0380801d -DATA 4 0x83fd9014 0x0040801d +DATA 4 0x83fd9014 0x0042801d DATA 4 0x83fd9014 0x00008004 # Write to CTL0 diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 8f75af19d4..454ff0a846 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -37,6 +37,8 @@ DECLARE_GLOBAL_DATA_PTR; +#define HOT_WATER_BUTTON 38 + #ifdef CONFIG_USB_EHCI static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -68,6 +70,27 @@ int board_init(void) return 0; } +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + if (gpio_request(HOT_WATER_BUTTON, "hot-water-button") < 0) { + puts("Failed to get hot-water-button pin\n"); + return -ENODEV; + } + gpio_direction_input(HOT_WATER_BUTTON); + + /* + * if hot-water-button is pressed + * change bootcmd + */ + if (gpio_get_value(HOT_WATER_BUTTON)) + return 0; + + setenv("bootcmd", "run swupdate"); + return 0; +} +#endif + /* * Routine: set_muxconf_regs * Description: Setting up the configuration Mux registers specific to the diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h index d675a48310..867cc9e88d 100644 --- a/board/htkw/mcx/mcx.h +++ b/board/htkw/mcx/mcx.h @@ -284,9 +284,14 @@ const omap3_sysinfo sysinfo = { /* HSUSB2_dat3 */\ /* CCDC */\ MUX_VAL(CP(CCDC_PCLK), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(CCDC_HD), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(CCDC_VD), (IEN | PTD | EN | M4)) \ + /* CCDC_FIELD: gpio_95, uP-TXD4 */ \ + MUX_VAL(CP(CCDC_FIELD), (IDIS | PTD | DIS | M2)) \ + /* CCDC_HD: gpio_96, uP-RTS4# */ \ + MUX_VAL(CP(CCDC_HD), (IDIS | PTD | DIS | M2)) \ + /* CCDC_VD: gpio_97, uP-CTS4# */ \ + MUX_VAL(CP(CCDC_VD), (IEN | PTD | EN | M2)) \ + /* CCDC_WEN: gpio_98, uP-RXD4 */ \ + MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M2)) \ MUX_VAL(CP(CCDC_WEN), (IEN | PTD | EN | M4)) \ MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | EN | M4)) \ MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | EN | M4)) \ diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c index 971e31b5f3..a8257a3005 100644 --- a/board/isee/igep0020/igep0020.c +++ b/board/isee/igep0020/igep0020.c @@ -58,6 +58,46 @@ int board_init(void) return 0; } +#ifdef CONFIG_SPL_BUILD +/* + * Routine: omap_rev_string + * Description: For SPL builds output board rev + */ +void omap_rev_string(void) +{ +} + +/* + * Routine: get_board_mem_timings + * Description: If we use SPL then there is no x-loader nor config header + * so we have to setup the DDR timings ourself on both banks. + */ +void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, + u32 *mr) +{ + *mr = MICRON_V_MR_165; +#ifdef CONFIG_BOOT_NAND + *mcfg = MICRON_V_MCFG_200(256 << 20); + *ctrla = MICRON_V_ACTIMA_200; + *ctrlb = MICRON_V_ACTIMB_200; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; +#else + if (get_cpu_family() == CPU_OMAP34XX) { + *mcfg = NUMONYX_V_MCFG_165(256 << 20); + *ctrla = NUMONYX_V_ACTIMA_165; + *ctrlb = NUMONYX_V_ACTIMB_165; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + + } else { + *mcfg = NUMONYX_V_MCFG_200(256 << 20); + *ctrla = NUMONYX_V_ACTIMA_200; + *ctrlb = NUMONYX_V_ACTIMB_200; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + } +#endif +} +#endif + /* * Routine: setup_net_chip * Description: Setting up the configuration GPMC registers specific to the @@ -91,7 +131,7 @@ static void setup_net_chip(void) } #endif -#ifdef CONFIG_GENERIC_MMC +#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { omap_mmc_init(0, 0, 0); diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h index 3d6e15fb73..3335ecc787 100644 --- a/board/isee/igep0020/igep0020.h +++ b/board/isee/igep0020/igep0020.h @@ -26,7 +26,11 @@ const omap3_sysinfo sysinfo = { DDR_STACKED, "IGEP v2 board", +#if defined(CONFIG_ENV_IS_IN_ONENAND) "ONENAND", +#else + "NAND", +#endif }; static void setup_net_chip(void); diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c index 653c1b5abb..107cb7f8e0 100644 --- a/board/isee/igep0030/igep0030.c +++ b/board/isee/igep0030/igep0030.c @@ -45,7 +45,47 @@ int board_init(void) return 0; } -#ifdef CONFIG_GENERIC_MMC +#ifdef CONFIG_SPL_BUILD +/* + * Routine: omap_rev_string + * Description: For SPL builds output board rev + */ +void omap_rev_string(void) +{ +} + +/* + * Routine: get_board_mem_timings + * Description: If we use SPL then there is no x-loader nor config header + * so we have to setup the DDR timings ourself on both banks. + */ +void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, + u32 *mr) +{ + *mr = MICRON_V_MR_165; +#ifdef CONFIG_BOOT_NAND + *mcfg = MICRON_V_MCFG_200(256 << 20); + *ctrla = MICRON_V_ACTIMA_200; + *ctrlb = MICRON_V_ACTIMB_200; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; +#else + if (get_cpu_family() == CPU_OMAP34XX) { + *mcfg = NUMONYX_V_MCFG_165(256 << 20); + *ctrla = NUMONYX_V_ACTIMA_165; + *ctrlb = NUMONYX_V_ACTIMB_165; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + + } else { + *mcfg = NUMONYX_V_MCFG_200(256 << 20); + *ctrla = NUMONYX_V_ACTIMA_200; + *ctrlb = NUMONYX_V_ACTIMB_200; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + } +#endif +} +#endif + +#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { omap_mmc_init(0, 0, 0); diff --git a/board/isee/igep0030/igep0030.h b/board/isee/igep0030/igep0030.h index b7ce5aa663..a93339daab 100644 --- a/board/isee/igep0030/igep0030.h +++ b/board/isee/igep0030/igep0030.h @@ -26,7 +26,11 @@ const omap3_sysinfo sysinfo = { DDR_STACKED, "OMAP3 IGEP module", +#if defined(CONFIG_ENV_IS_IN_ONENAND) "ONENAND", +#else + "NAND", +#endif }; /* diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c index 2a29943733..362f00a173 100644 --- a/board/karo/tx25/tx25.c +++ b/board/karo/tx25/tx25.c @@ -34,14 +34,14 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_FEC_MXC +#define GPIO_FEC_RESET_B IMX_GPIO_NR(4, 7) +#define GPIO_FEC_ENABLE_B IMX_GPIO_NR(4, 9) + void tx25_fec_init(void) { struct iomuxc_mux_ctl *muxctl; struct iomuxc_pad_ctl *padctl; - u32 val; u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5); - struct gpio_regs *gpio4 = (struct gpio_regs *)IMX_GPIO4_BASE; - struct gpio_regs *gpio3 = (struct gpio_regs *)IMX_GPIO3_BASE; u32 saved_rdata0_mode, saved_rdata1_mode, saved_rx_dv_mode; debug("tx25_fec_init\n"); @@ -66,18 +66,15 @@ void tx25_fec_init(void) writel(0x0, &padctl->pad_d11); /* drop PHY power and assert reset (low) */ - val = readl(&gpio4->gpio_dr) & ~((1 << 7) | (1 << 9)); - writel(val, &gpio4->gpio_dr); - val = readl(&gpio4->gpio_dir) | (1 << 7) | (1 << 9); - writel(val, &gpio4->gpio_dir); + gpio_direction_output(GPIO_FEC_RESET_B, 0); + gpio_direction_output(GPIO_FEC_ENABLE_B, 0); mdelay(5); debug("resetting phy\n"); /* turn on PHY power leaving reset asserted */ - val = readl(&gpio4->gpio_dr) | 1 << 9; - writel(val, &gpio4->gpio_dr); + gpio_set_value(GPIO_FEC_ENABLE_B, 1); mdelay(10); @@ -107,19 +104,16 @@ void tx25_fec_init(void) /* * set each to 1 and make each an output */ - val = readl(&gpio3->gpio_dr) | (1 << 10) | (1 << 11) | (1 << 12); - writel(val, &gpio3->gpio_dr); - val = readl(&gpio3->gpio_dir) | (1 << 10) | (1 << 11) | (1 << 12); - writel(val, &gpio3->gpio_dir); + gpio_direction_output(IMX_GPIO_NR(3, 10), 1); + gpio_direction_output(IMX_GPIO_NR(3, 11), 1); + gpio_direction_output(IMX_GPIO_NR(3, 12), 1); mdelay(22); /* this value came from RedBoot */ /* * deassert PHY reset */ - val = readl(&gpio4->gpio_dr) | 1 << 7; - writel(val, &gpio4->gpio_dr); - writel(val, &gpio4->gpio_dr); + gpio_set_value(GPIO_FEC_RESET_B, 1); mdelay(5); diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c index 8a5015c51c..b38e5ab935 100644 --- a/board/logicpd/imx27lite/imx27lite.c +++ b/board/logicpd/imx27lite/imx27lite.c @@ -23,12 +23,12 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> +#include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; int board_init(void) { - struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE; #if defined(CONFIG_SYS_NAND_LARGEPAGE) struct system_control_regs *sc_regs = (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; @@ -43,8 +43,7 @@ int board_init(void) #ifdef CONFIG_FEC_MXC mx27_fec_init_pins(); imx_gpio_mode((GPIO_PORTC | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 31)); - writel(readl(®s->port[PORTC].dr) | (1 << 31), - ®s->port[PORTC].dr); + gpio_set_value(GPIO_PORTC | 31, 1); #endif #ifdef CONFIG_MXC_MMC #if defined(CONFIG_MAGNESIUM) diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index e65fc9e843..7ab20408e8 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -25,7 +25,7 @@ #include <ns16550.h> #include <linux/compiler.h> #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/sys_proto.h> #include <asm/arch/board.h> @@ -45,10 +45,11 @@ DECLARE_GLOBAL_DATA_PTR; -const struct tegra2_sysinfo sysinfo = { - CONFIG_TEGRA2_BOARD_STRING +const struct tegra20_sysinfo sysinfo = { + CONFIG_TEGRA20_BOARD_STRING }; +#ifndef CONFIG_SPL_BUILD /* * Routine: timer_init * Description: init the timestamp and lastinc value @@ -57,6 +58,7 @@ int timer_init(void) { return 0; } +#endif void __pin_mux_usb(void) { @@ -76,8 +78,8 @@ void pin_mux_spi(void) __attribute__((weak, alias("__pin_mux_spi"))); */ static void power_det_init(void) { -#if defined(CONFIG_TEGRA2) - struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; +#if defined(CONFIG_TEGRA20) + struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; /* turn off power detects */ writel(0, &pmc->pmc_pwr_det_latch); @@ -130,7 +132,10 @@ int board_init(void) board_usb_init(gd->fdt_blob); #endif -#ifdef CONFIG_TEGRA2_LP0 +#ifdef CONFIG_TEGRA20_LP0 + /* save Sdram params to PMC 2, 4, and 24 for WB0 */ + warmboot_save_sdram_params(); + /* prepare the WB code to LP0 location */ warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE); #endif diff --git a/board/nvidia/common/emc.c b/board/nvidia/common/emc.c index 8e4290ceed..739d4bd442 100644 --- a/board/nvidia/common/emc.c +++ b/board/nvidia/common/emc.c @@ -28,7 +28,7 @@ #include <asm/arch/emc.h> #include <asm/arch/pmu.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/nvidia/common/uart-spi-switch.c b/board/nvidia/common/uart-spi-switch.c index 307937a836..6b2175879b 100644 --- a/board/nvidia/common/uart-spi-switch.c +++ b/board/nvidia/common/uart-spi-switch.c @@ -24,7 +24,7 @@ #include <asm/gpio.h> #include <asm/arch/pinmux.h> #include <asm/arch/uart-spi-switch.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/tegra_spi.h> diff --git a/board/nvidia/dts/tegra2-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index 4f60a05f33..c351954301 100644 --- a/board/nvidia/dts/tegra2-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -3,7 +3,7 @@ /include/ ARCH_CPU_DTS / { - model = "NVIDIA Tegra2 Harmony evaluation board"; + model = "NVIDIA Tegra20 Harmony evaluation board"; compatible = "nvidia,harmony", "nvidia,tegra20"; aliases { diff --git a/board/nvidia/dts/tegra2-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts index 335253953b..335253953b 100644 --- a/board/nvidia/dts/tegra2-seaboard.dts +++ b/board/nvidia/dts/tegra20-seaboard.dts diff --git a/board/nvidia/dts/tegra2-ventana.dts b/board/nvidia/dts/tegra20-ventana.dts index 900e871d74..38b7b1355d 100644 --- a/board/nvidia/dts/tegra2-ventana.dts +++ b/board/nvidia/dts/tegra20-ventana.dts @@ -3,7 +3,7 @@ /include/ ARCH_CPU_DTS / { - model = "NVIDIA Tegra2 Ventana evaluation board"; + model = "NVIDIA Tegra20 Ventana evaluation board"; compatible = "nvidia,ventana", "nvidia,tegra20"; aliases { diff --git a/board/nvidia/dts/tegra2-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts index b22d4073f6..38599bd67d 100644 --- a/board/nvidia/dts/tegra2-whistler.dts +++ b/board/nvidia/dts/tegra20-whistler.dts @@ -3,7 +3,7 @@ /include/ ARCH_CPU_DTS / { - model = "NVIDIA Tegra2 Whistler evaluation board"; + model = "NVIDIA Tegra20 Whistler evaluation board"; compatible = "nvidia,whistler", "nvidia,tegra20"; aliases { diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index f27ad37b70..44977c78d1 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -23,7 +23,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> @@ -73,11 +73,11 @@ int board_mmc_init(bd_t *bd) debug("board_mmc_init: init SD slot J26\n"); /* init dev 0, SD slot J26, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra2_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); + tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); debug("board_mmc_init: init SD slot J5\n"); /* init dev 2, SD slot J5, with 4-bit bus */ - tegra2_mmc_init(2, 4, GPIO_PT3, GPIO_PI5); + tegra20_mmc_init(2, 4, GPIO_PT3, GPIO_PI5); return 0; } diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index 36039c4ed8..3298a6b3a8 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -23,7 +23,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> @@ -81,11 +81,11 @@ int board_mmc_init(bd_t *bd) debug("board_mmc_init: init eMMC\n"); /* init dev 0, eMMC chip, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra2_mmc_init(0, 4, -1, -1); + tegra20_mmc_init(0, 4, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 1, SD slot, with 4-bit bus */ - tegra2_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); + tegra20_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); return 0; } diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c index 3ec24df2e7..c0a114d667 100644 --- a/board/nvidia/whistler/whistler.c +++ b/board/nvidia/whistler/whistler.c @@ -24,7 +24,7 @@ #include <common.h> #include <i2c.h> #include <asm/io.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> @@ -81,10 +81,10 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); /* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */ - tegra2_mmc_init(0, 8, -1, -1); + tegra20_mmc_init(0, 8, -1, -1); /* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */ - tegra2_mmc_init(1, 8, -1, -1); + tegra20_mmc_init(1, 8, -1, -1); return 0; } diff --git a/board/raspberrypi/rpi_b/Makefile b/board/raspberrypi/rpi_b/Makefile new file mode 100644 index 0000000000..9d0c377c1b --- /dev/null +++ b/board/raspberrypi/rpi_b/Makefile @@ -0,0 +1,34 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# version 2 as published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c new file mode 100644 index 0000000000..688b0aade1 --- /dev/null +++ b/board/raspberrypi/rpi_b/rpi_b.c @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = 0x100; + + return 0; +} diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile index 226db1f1f1..1474fa8a15 100644 --- a/board/samsung/smdk5250/Makefile +++ b/board/samsung/smdk5250/Makefile @@ -27,8 +27,9 @@ LIB = $(obj)lib$(BOARD).o SOBJS := lowlevel_init.o COBJS := clock_init.o -COBJS += dmc_init.o +COBJS += dmc_common.o dmc_init_ddr3.o COBJS += tzpc_init.o +COBJS += smdk5250_spl.o ifndef CONFIG_SPL_BUILD COBJS += smdk5250.o diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c index 305842d2fd..c009ae579a 100644 --- a/board/samsung/smdk5250/clock_init.c +++ b/board/samsung/smdk5250/clock_init.c @@ -22,181 +22,645 @@ * MA 02111-1307 USA */ +#include <common.h> #include <config.h> -#include <version.h> #include <asm/io.h> +#include <asm/arch/clk.h> #include <asm/arch/clock.h> -#include <asm/arch/cpu.h> -#include <asm/arch/gpio.h> +#include <asm/arch/spl.h> + +#include "clock_init.h" #include "setup.h" -void system_clock_init() +DECLARE_GLOBAL_DATA_PTR; + +struct arm_clk_ratios arm_clk_ratios[] = { + { + .arm_freq_mhz = 600, + + .apll_mdiv = 0xc8, + .apll_pdiv = 0x4, + .apll_sdiv = 0x1, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x2, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x1, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 800, + + .apll_mdiv = 0x64, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x3, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x2, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1000, + + .apll_mdiv = 0x7d, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x1, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x4, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x2, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1200, + + .apll_mdiv = 0x96, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x5, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1400, + + .apll_mdiv = 0xaf, + .apll_pdiv = 0x3, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x6, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + }, { + .arm_freq_mhz = 1700, + + .apll_mdiv = 0x1a9, + .apll_pdiv = 0x6, + .apll_sdiv = 0x0, + + .arm2_ratio = 0x0, + .apll_ratio = 0x3, + .pclk_dbg_ratio = 0x1, + .atb_ratio = 0x6, + .periph_ratio = 0x7, + .acp_ratio = 0x7, + .cpud_ratio = 0x3, + .arm_ratio = 0x0, + } +}; +struct mem_timings mem_timings[] = { + { + .mem_manuf = MEM_MANUF_ELPIDA, + .mem_type = DDR_MODE_DDR3, + .frequency_mhz = 800, + .mpll_mdiv = 0xc8, + .mpll_pdiv = 0x3, + .mpll_sdiv = 0x0, + .cpll_mdiv = 0xde, + .cpll_pdiv = 0x4, + .cpll_sdiv = 0x2, + .gpll_mdiv = 0x215, + .gpll_pdiv = 0xc, + .gpll_sdiv = 0x1, + .epll_mdiv = 0x60, + .epll_pdiv = 0x3, + .epll_sdiv = 0x3, + .vpll_mdiv = 0x96, + .vpll_pdiv = 0x3, + .vpll_sdiv = 0x2, + + .bpll_mdiv = 0x64, + .bpll_pdiv = 0x3, + .bpll_sdiv = 0x0, + .pclk_cdrex_ratio = 0x5, + .direct_cmd_msr = { + 0x00020018, 0x00030000, 0x00010042, 0x00000d70 + }, + .timing_ref = 0x000000bb, + .timing_row = 0x8c36650e, + .timing_data = 0x3630580b, + .timing_power = 0x41000a44, + .phy0_dqs = 0x08080808, + .phy1_dqs = 0x08080808, + .phy0_dq = 0x08080808, + .phy1_dq = 0x08080808, + .phy0_tFS = 0x4, + .phy1_tFS = 0x4, + .phy0_pulld_dqs = 0xf, + .phy1_pulld_dqs = 0xf, + + .lpddr3_ctrl_phy_reset = 0x1, + .ctrl_start_point = 0x10, + .ctrl_inc = 0x10, + .ctrl_start = 0x1, + .ctrl_dll_on = 0x1, + .ctrl_ref = 0x8, + + .ctrl_force = 0x1a, + .ctrl_rdlat = 0x0b, + .ctrl_bstlen = 0x08, + + .fp_resync = 0x8, + .iv_size = 0x7, + .dfi_init_start = 1, + .aref_en = 1, + + .rd_fetch = 0x3, + + .zq_mode_dds = 0x7, + .zq_mode_term = 0x1, + .zq_mode_noterm = 0, + + /* + * Dynamic Clock: Always Running + * Memory Burst length: 8 + * Number of chips: 1 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 0 Cycle + */ + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | + DMC_MEMCONTROL_DPWRDN_DISABLE | + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | + DMC_MEMCONTROL_TP_DISABLE | + DMC_MEMCONTROL_DSREF_ENABLE | + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | + DMC_MEMCONTROL_MEM_TYPE_DDR3 | + DMC_MEMCONTROL_MEM_WIDTH_32BIT | + DMC_MEMCONTROL_NUM_CHIP_1 | + DMC_MEMCONTROL_BL_8 | + DMC_MEMCONTROL_PZQ_DISABLE | + DMC_MEMCONTROL_MRR_BYTE_7_0, + .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGx_CHIP_COL_10 | + DMC_MEMCONFIGx_CHIP_ROW_15 | + DMC_MEMCONFIGx_CHIP_BANK_8, + .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), + .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), + .prechconfig_tp_cnt = 0xff, + .dpwrdn_cyc = 0xff, + .dsref_cyc = 0xffff, + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | + DMC_CONCONTROL_TIMEOUT_LEVEL0 | + DMC_CONCONTROL_RD_FETCH_DISABLE | + DMC_CONCONTROL_EMPTY_DISABLE | + DMC_CONCONTROL_AREF_EN_DISABLE | + DMC_CONCONTROL_IO_PD_CON_DISABLE, + .dmc_channels = 2, + .chips_per_channel = 2, + .chips_to_configure = 1, + .send_zq_init = 1, + .impedance = IMP_OUTPUT_DRV_30_OHM, + .gate_leveling_enable = 0, + }, { + .mem_manuf = MEM_MANUF_SAMSUNG, + .mem_type = DDR_MODE_DDR3, + .frequency_mhz = 800, + .mpll_mdiv = 0xc8, + .mpll_pdiv = 0x3, + .mpll_sdiv = 0x0, + .cpll_mdiv = 0xde, + .cpll_pdiv = 0x4, + .cpll_sdiv = 0x2, + .gpll_mdiv = 0x215, + .gpll_pdiv = 0xc, + .gpll_sdiv = 0x1, + .epll_mdiv = 0x60, + .epll_pdiv = 0x3, + .epll_sdiv = 0x3, + .vpll_mdiv = 0x96, + .vpll_pdiv = 0x3, + .vpll_sdiv = 0x2, + + .bpll_mdiv = 0x64, + .bpll_pdiv = 0x3, + .bpll_sdiv = 0x0, + .pclk_cdrex_ratio = 0x5, + .direct_cmd_msr = { + 0x00020018, 0x00030000, 0x00010000, 0x00000d70 + }, + .timing_ref = 0x000000bb, + .timing_row = 0x8c36650e, + .timing_data = 0x3630580b, + .timing_power = 0x41000a44, + .phy0_dqs = 0x08080808, + .phy1_dqs = 0x08080808, + .phy0_dq = 0x08080808, + .phy1_dq = 0x08080808, + .phy0_tFS = 0x8, + .phy1_tFS = 0x8, + .phy0_pulld_dqs = 0xf, + .phy1_pulld_dqs = 0xf, + + .lpddr3_ctrl_phy_reset = 0x1, + .ctrl_start_point = 0x10, + .ctrl_inc = 0x10, + .ctrl_start = 0x1, + .ctrl_dll_on = 0x1, + .ctrl_ref = 0x8, + + .ctrl_force = 0x1a, + .ctrl_rdlat = 0x0b, + .ctrl_bstlen = 0x08, + + .fp_resync = 0x8, + .iv_size = 0x7, + .dfi_init_start = 1, + .aref_en = 1, + + .rd_fetch = 0x3, + + .zq_mode_dds = 0x5, + .zq_mode_term = 0x1, + .zq_mode_noterm = 1, + + /* + * Dynamic Clock: Always Running + * Memory Burst length: 8 + * Number of chips: 1 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 0 Cycle + */ + .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | + DMC_MEMCONTROL_DPWRDN_DISABLE | + DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | + DMC_MEMCONTROL_TP_DISABLE | + DMC_MEMCONTROL_DSREF_ENABLE | + DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | + DMC_MEMCONTROL_MEM_TYPE_DDR3 | + DMC_MEMCONTROL_MEM_WIDTH_32BIT | + DMC_MEMCONTROL_NUM_CHIP_1 | + DMC_MEMCONTROL_BL_8 | + DMC_MEMCONTROL_PZQ_DISABLE | + DMC_MEMCONTROL_MRR_BYTE_7_0, + .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | + DMC_MEMCONFIGx_CHIP_COL_10 | + DMC_MEMCONFIGx_CHIP_ROW_15 | + DMC_MEMCONFIGx_CHIP_BANK_8, + .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), + .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), + .prechconfig_tp_cnt = 0xff, + .dpwrdn_cyc = 0xff, + .dsref_cyc = 0xffff, + .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | + DMC_CONCONTROL_TIMEOUT_LEVEL0 | + DMC_CONCONTROL_RD_FETCH_DISABLE | + DMC_CONCONTROL_EMPTY_DISABLE | + DMC_CONCONTROL_AREF_EN_DISABLE | + DMC_CONCONTROL_IO_PD_CON_DISABLE, + .dmc_channels = 2, + .chips_per_channel = 2, + .chips_to_configure = 1, + .send_zq_init = 1, + .impedance = IMP_OUTPUT_DRV_40_OHM, + .gate_leveling_enable = 1, + } +}; + +/** + * Get the required memory type and speed (SPL version). + * + * In SPL we have no device tree, so we use the machine parameters + * + * @param mem_type Returns memory type + * @param frequency_mhz Returns memory speed in MHz + * @param arm_freq Returns ARM clock speed in MHz + * @param mem_manuf Return Memory Manufacturer name + * @return 0 if all ok + */ +static int clock_get_mem_selection(enum ddr_mode *mem_type, + unsigned *frequency_mhz, unsigned *arm_freq, + enum mem_manuf *mem_manuf) { - struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; + struct spl_machine_param *params; - /* - * MUX_APLL_SEL[0]: FINPLL = 0 - * MUX_CPU_SEL[6]: MOUTAPLL = 0 - * MUX_HPM_SEL[20]: MOUTAPLL = 0 - */ - writel(0x0, &clk->src_cpu); + params = spl_get_machine_params(); + *mem_type = params->mem_type; + *frequency_mhz = params->frequency_mhz; + *arm_freq = params->arm_freq_mhz; + *mem_manuf = params->mem_manuf; - /* MUX_MPLL_SEL[8]: FINPLL = 0 */ - writel(0x0, &clk->src_core1); + return 0; +} - /* - * VPLLSRC_SEL[0]: FINPLL = 0 - * MUX_{CPLL[8]}|{EPLL[12]}|{VPLL[16]}_SEL: FINPLL = 0 - */ - writel(0x0, &clk->src_top2); +/* Get the ratios for setting ARM clock */ +struct arm_clk_ratios *get_arm_ratios(void) +{ + struct arm_clk_ratios *arm_ratio; + enum ddr_mode mem_type; + enum mem_manuf mem_manuf; + unsigned frequency_mhz, arm_freq; + int i; + + if (clock_get_mem_selection(&mem_type, &frequency_mhz, + &arm_freq, &mem_manuf)) + ; + for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios); + i++, arm_ratio++) { + if (arm_ratio->arm_freq_mhz == arm_freq) + return arm_ratio; + } + + /* will hang if failed to find clock ratio */ + while (1) + ; + + return NULL; +} - /* MUX_BPLL_SEL[0]: FINPLL = 0 */ - writel(0x0, &clk->src_cdrex); +struct mem_timings *clock_get_mem_timings(void) +{ + struct mem_timings *mem; + enum ddr_mode mem_type; + enum mem_manuf mem_manuf; + unsigned frequency_mhz, arm_freq; + int i; + + if (!clock_get_mem_selection(&mem_type, &frequency_mhz, + &arm_freq, &mem_manuf)) { + for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings); + i++, mem++) { + if (mem->mem_type == mem_type && + mem->frequency_mhz == frequency_mhz && + mem->mem_manuf == mem_manuf) + return mem; + } + } + + /* will hang if failed to find memory timings */ + while (1) + ; + + return NULL; +} - /* MUX_ACLK_* Clock Selection */ - writel(CLK_SRC_TOP0_VAL, &clk->src_top0); +void system_clock_init() +{ + struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; + struct mem_timings *mem; + struct arm_clk_ratios *arm_clk_ratio; + u32 val, tmp; + + mem = clock_get_mem_timings(); + arm_clk_ratio = get_arm_ratios(); + + clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK); + do { + val = readl(&clk->mux_stat_cpu); + } while ((val | MUX_APLL_SEL_MASK) != val); + + clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK); + do { + val = readl(&clk->mux_stat_core1); + } while ((val | MUX_MPLL_SEL_MASK) != val); + + clrbits_le32(&clk->src_core1, MUX_CPLL_SEL_MASK); + clrbits_le32(&clk->src_core1, MUX_EPLL_SEL_MASK); + clrbits_le32(&clk->src_core1, MUX_VPLL_SEL_MASK); + clrbits_le32(&clk->src_core1, MUX_GPLL_SEL_MASK); + tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK + | MUX_GPLL_SEL_MASK; + do { + val = readl(&clk->mux_stat_top2); + } while ((val | tmp) != val); + + clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK); + do { + val = readl(&clk->mux_stat_cdrex); + } while ((val | MUX_BPLL_SEL_MASK) != val); - /* MUX_ACLK_* Clock Selection */ - writel(CLK_SRC_TOP1_VAL, &clk->src_top1); + /* PLL locktime */ + writel(APLL_LOCK_VAL, &clk->apll_lock); - /* MUX_ACLK_* Clock Selection */ - writel(CLK_SRC_TOP3_VAL, &clk->src_top3); + writel(MPLL_LOCK_VAL, &clk->mpll_lock); - /* MUX_PWI_SEL[19:16]: SCLKMPLL = 6 */ - writel(CLK_SRC_CORE0_VAL, &clk->src_core0); + writel(BPLL_LOCK_VAL, &clk->bpll_lock); - /* MUX_ATCLK_LEX[0]: ACLK_200 = 0 */ - writel(CLK_SRC_LEX_VAL, &clk->src_lex); + writel(CPLL_LOCK_VAL, &clk->cpll_lock); - /* UART [0-5]: SCLKMPLL = 6 */ - writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0); + writel(GPLL_LOCK_VAL, &clk->gpll_lock); - /* Set Clock Ratios */ - writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0); + writel(EPLL_LOCK_VAL, &clk->epll_lock); + + writel(VPLL_LOCK_VAL, &clk->vpll_lock); + + writel(CLK_REG_DISABLE, &clk->pll_div2_sel); + + writel(MUX_HPM_SEL_MASK, &clk->src_cpu); + do { + val = readl(&clk->mux_stat_cpu); + } while ((val | HPM_SEL_SCLK_MPLL) != val); + + val = arm_clk_ratio->arm2_ratio << 28 + | arm_clk_ratio->apll_ratio << 24 + | arm_clk_ratio->pclk_dbg_ratio << 20 + | arm_clk_ratio->atb_ratio << 16 + | arm_clk_ratio->periph_ratio << 12 + | arm_clk_ratio->acp_ratio << 8 + | arm_clk_ratio->cpud_ratio << 4 + | arm_clk_ratio->arm_ratio; + writel(val, &clk->div_cpu0); + do { + val = readl(&clk->div_stat_cpu0); + } while (0 != val); - /* Set COPY and HPM Ratio */ writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); + do { + val = readl(&clk->div_stat_cpu1); + } while (0 != val); - /* CORED_RATIO, COREP_RATIO */ - writel(CLK_DIV_CORE0_VAL, &clk->div_core0); + /* Set APLL */ + writel(APLL_CON1_VAL, &clk->apll_con1); + val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv, + arm_clk_ratio->apll_sdiv); + writel(val, &clk->apll_con0); + while (readl(&clk->apll_con0) & APLL_CON0_LOCKED) + ; - /* PWI_RATIO[11:8], DVSEM_RATIO[22:16], DPM_RATIO[24:20] */ - writel(CLK_DIV_CORE1_VAL, &clk->div_core1); + /* Set MPLL */ + writel(MPLL_CON1_VAL, &clk->mpll_con1); + val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv); + writel(val, &clk->mpll_con0); + while (readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) + ; - /* ACLK_*_RATIO */ - writel(CLK_DIV_TOP0_VAL, &clk->div_top0); + /* Set BPLL */ + writel(BPLL_CON1_VAL, &clk->bpll_con1); + val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv); + writel(val, &clk->bpll_con0); + while (readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) + ; - /* ACLK_*_RATIO */ - writel(CLK_DIV_TOP1_VAL, &clk->div_top1); + /* Set CPLL */ + writel(CPLL_CON1_VAL, &clk->cpll_con1); + val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv); + writel(val, &clk->cpll_con0); + while (readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) + ; + + /* Set GPLL */ + writel(GPLL_CON1_VAL, &clk->gpll_con1); + val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv); + writel(val, &clk->gpll_con0); + while (readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) + ; - /* CDREX Ratio */ - writel(CLK_DIV_CDREX_INIT_VAL, &clk->div_cdrex); + /* Set EPLL */ + writel(EPLL_CON2_VAL, &clk->epll_con2); + writel(EPLL_CON1_VAL, &clk->epll_con1); + val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv); + writel(val, &clk->epll_con0); + while (readl(&clk->epll_con0) & EPLL_CON0_LOCKED) + ; - /* MCLK_EFPHY_RATIO[3:0] */ - writel(CLK_DIV_CDREX2_VAL, &clk->div_cdrex2); + /* Set VPLL */ + writel(VPLL_CON2_VAL, &clk->vpll_con2); + writel(VPLL_CON1_VAL, &clk->vpll_con1); + val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv); + writel(val, &clk->vpll_con0); + while (readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) + ; - /* {PCLK[4:6]|ATCLK[10:8]}_RATIO */ - writel(CLK_DIV_LEX_VAL, &clk->div_lex); + writel(CLK_SRC_CORE0_VAL, &clk->src_core0); + writel(CLK_DIV_CORE0_VAL, &clk->div_core0); + while (readl(&clk->div_stat_core0) != 0) + ; - /* PCLK_R0X_RATIO[3:0] */ - writel(CLK_DIV_R0X_VAL, &clk->div_r0x); + writel(CLK_DIV_CORE1_VAL, &clk->div_core1); + while (readl(&clk->div_stat_core1) != 0) + ; - /* PCLK_R1X_RATIO[3:0] */ - writel(CLK_DIV_R1X_VAL, &clk->div_r1x); + writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt); + while (readl(&clk->div_stat_sysrgt) != 0) + ; - /* SATA[24]: SCLKMPLL=0, MMC[0-4]: SCLKMPLL = 6 */ - writel(CLK_SRC_FSYS_VAL, &clk->src_fsys); + writel(CLK_DIV_ACP_VAL, &clk->div_acp); + while (readl(&clk->div_stat_acp) != 0) + ; - /* UART[0-4] */ - writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0); + writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft); + while (readl(&clk->div_stat_syslft) != 0) + ; - /* PWM_RATIO[3:0] */ - writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3); + writel(CLK_SRC_TOP0_VAL, &clk->src_top0); + writel(CLK_SRC_TOP1_VAL, &clk->src_top1); + writel(TOP2_VAL, &clk->src_top2); + writel(CLK_SRC_TOP3_VAL, &clk->src_top3); - /* SATA_RATIO, USB_DRD_RATIO */ - writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0); + writel(CLK_DIV_TOP0_VAL, &clk->div_top0); + while (readl(&clk->div_stat_top0)) + ; - /* MMC[0-1] */ - writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1); + writel(CLK_DIV_TOP1_VAL, &clk->div_top1); + while (readl(&clk->div_stat_top1)) + ; - /* MMC[2-3] */ - writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2); + writel(CLK_SRC_LEX_VAL, &clk->src_lex); + while (1) { + val = readl(&clk->mux_stat_lex); + if (val == (val | 1)) + break; + } - /* MMC[4] */ - writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3); + writel(CLK_DIV_LEX_VAL, &clk->div_lex); + while (readl(&clk->div_stat_lex)) + ; - /* ACLK|PLCK_ACP_RATIO */ - writel(CLK_DIV_ACP_VAL, &clk->div_acp); + writel(CLK_DIV_R0X_VAL, &clk->div_r0x); + while (readl(&clk->div_stat_r0x)) + ; - /* ISPDIV0_RATIO, ISPDIV1_RATIO */ - writel(CLK_DIV_ISP0_VAL, &clk->div_isp0); + writel(CLK_DIV_R0X_VAL, &clk->div_r0x); + while (readl(&clk->div_stat_r0x)) + ; - /* MCUISPDIV0_RATIO, MCUISPDIV1_RATIO */ - writel(CLK_DIV_ISP1_VAL, &clk->div_isp1); + writel(CLK_DIV_R1X_VAL, &clk->div_r1x); + while (readl(&clk->div_stat_r1x)) + ; - /* MPWMDIV_RATIO */ - writel(CLK_DIV_ISP2_VAL, &clk->div_isp2); + writel(CLK_REG_DISABLE, &clk->src_cdrex); - /* PLL locktime */ - writel(APLL_LOCK_VAL, &clk->apll_lock); + writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex); + while (readl(&clk->div_stat_cdrex)) + ; - writel(MPLL_LOCK_VAL, &clk->mpll_lock); + val = readl(&clk->src_cpu); + val |= CLK_SRC_CPU_VAL; + writel(val, &clk->src_cpu); - writel(BPLL_LOCK_VAL, &clk->bpll_lock); + val = readl(&clk->src_top2); + val |= CLK_SRC_TOP2_VAL; + writel(val, &clk->src_top2); - writel(CPLL_LOCK_VAL, &clk->cpll_lock); + val = readl(&clk->src_core1); + val |= CLK_SRC_CORE1_VAL; + writel(val, &clk->src_core1); - writel(EPLL_LOCK_VAL, &clk->epll_lock); + writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys); + writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0); + while (readl(&clk->div_stat_fsys0)) + ; + + writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_core); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_top); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x); + writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex); - writel(VPLL_LOCK_VAL, &clk->vpll_lock); + writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0); + writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0); - sdelay(0x10000); + writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1); + writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1); + writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2); + writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3); - /* Set APLL */ - writel(APLL_CON1_VAL, &clk->apll_con1); - writel(APLL_CON0_VAL, &clk->apll_con0); - sdelay(0x30000); + writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp); + writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp); + writel(CLK_DIV_ISP0_VAL, &clk->div_isp0); + writel(CLK_DIV_ISP1_VAL, &clk->div_isp1); + writel(CLK_DIV_ISP2_VAL, &clk->div_isp2); - /* Set MPLL */ - writel(MPLL_CON1_VAL, &clk->mpll_con1); - writel(MPLL_CON0_VAL, &clk->mpll_con0); - sdelay(0x30000); - writel(BPLL_CON1_VAL, &clk->bpll_con1); - writel(BPLL_CON0_VAL, &clk->bpll_con0); - sdelay(0x30000); + /* FIMD1 SRC CLK SELECTION */ + writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0); - /* Set CPLL */ - writel(CPLL_CON1_VAL, &clk->cpll_con1); - writel(CPLL_CON0_VAL, &clk->cpll_con0); - sdelay(0x30000); + val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET + | MMC2_RATIO_VAL << MMC2_RATIO_OFFSET + | MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET + | MMC3_RATIO_VAL << MMC3_RATIO_OFFSET; + writel(val, &clk->div_fsys2); +} - /* Set EPLL */ - writel(EPLL_CON2_VAL, &clk->epll_con2); - writel(EPLL_CON1_VAL, &clk->epll_con1); - writel(EPLL_CON0_VAL, &clk->epll_con0); - sdelay(0x30000); +void clock_init_dp_clock(void) +{ + struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - /* Set VPLL */ - writel(VPLL_CON2_VAL, &clk->vpll_con2); - writel(VPLL_CON1_VAL, &clk->vpll_con1); - writel(VPLL_CON0_VAL, &clk->vpll_con0); - sdelay(0x30000); + /* DP clock enable */ + setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW); - /* Set MPLL */ - /* After Initiallising th PLL select the sources accordingly */ - /* MUX_APLL_SEL[0]: MOUTAPLLFOUT = 1 */ - writel(CLK_SRC_CPU_VAL, &clk->src_cpu); - - /* MUX_MPLL_SEL[8]: MOUTMPLLFOUT = 1 */ - writel(CLK_SRC_CORE1_VAL, &clk->src_core1); - - /* MUX_BPLL_SEL[0]: FOUTBPLL = 1*/ - writel(CLK_SRC_CDREX_INIT_VAL, &clk->src_cdrex); - - /* - * VPLLSRC_SEL[0]: FINPLL = 0 - * MUX_{CPLL[8]}|{EPLL[12]}|{VPLL[16]}_SEL: MOUT{CPLL|EPLL|VPLL} = 1 - * MUX_{MPLL[20]}|{BPLL[24]}_USER_SEL: FOUT{MPLL|BPLL} = 1 - */ - writel(CLK_SRC_TOP2_VAL, &clk->src_top2); + /* We run DP at 267 Mhz */ + setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1); } diff --git a/board/samsung/smdk5250/clock_init.h b/board/samsung/smdk5250/clock_init.h new file mode 100644 index 0000000000..f751bcb65a --- /dev/null +++ b/board/samsung/smdk5250/clock_init.h @@ -0,0 +1,149 @@ +/* + * Clock initialization routines + * + * Copyright (c) 2011 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __EXYNOS_CLOCK_INIT_H +#define __EXYNOS_CLOCK_INIT_H + +enum { + MEM_TIMINGS_MSR_COUNT = 4, +}; + +/* These are the ratio's for configuring ARM clock */ +struct arm_clk_ratios { + unsigned arm_freq_mhz; /* Frequency of ARM core in MHz */ + + unsigned apll_mdiv; + unsigned apll_pdiv; + unsigned apll_sdiv; + + unsigned arm2_ratio; + unsigned apll_ratio; + unsigned pclk_dbg_ratio; + unsigned atb_ratio; + unsigned periph_ratio; + unsigned acp_ratio; + unsigned cpud_ratio; + unsigned arm_ratio; +}; + +/* These are the memory timings for a particular memory type and speed */ +struct mem_timings { + enum mem_manuf mem_manuf; /* Memory manufacturer */ + enum ddr_mode mem_type; /* Memory type */ + unsigned frequency_mhz; /* Frequency of memory in MHz */ + + /* Here follow the timing parameters for the selected memory */ + unsigned apll_mdiv; + unsigned apll_pdiv; + unsigned apll_sdiv; + unsigned mpll_mdiv; + unsigned mpll_pdiv; + unsigned mpll_sdiv; + unsigned cpll_mdiv; + unsigned cpll_pdiv; + unsigned cpll_sdiv; + unsigned gpll_mdiv; + unsigned gpll_pdiv; + unsigned gpll_sdiv; + unsigned epll_mdiv; + unsigned epll_pdiv; + unsigned epll_sdiv; + unsigned vpll_mdiv; + unsigned vpll_pdiv; + unsigned vpll_sdiv; + unsigned bpll_mdiv; + unsigned bpll_pdiv; + unsigned bpll_sdiv; + unsigned pclk_cdrex_ratio; + unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; + + unsigned timing_ref; + unsigned timing_row; + unsigned timing_data; + unsigned timing_power; + + /* DQS, DQ, DEBUG offsets */ + unsigned phy0_dqs; + unsigned phy1_dqs; + unsigned phy0_dq; + unsigned phy1_dq; + unsigned phy0_tFS; + unsigned phy1_tFS; + unsigned phy0_pulld_dqs; + unsigned phy1_pulld_dqs; + + unsigned lpddr3_ctrl_phy_reset; + unsigned ctrl_start_point; + unsigned ctrl_inc; + unsigned ctrl_start; + unsigned ctrl_dll_on; + unsigned ctrl_ref; + + unsigned ctrl_force; + unsigned ctrl_rdlat; + unsigned ctrl_bstlen; + + unsigned fp_resync; + unsigned iv_size; + unsigned dfi_init_start; + unsigned aref_en; + + unsigned rd_fetch; + + unsigned zq_mode_dds; + unsigned zq_mode_term; + unsigned zq_mode_noterm; /* 1 to allow termination disable */ + + unsigned memcontrol; + unsigned memconfig; + + unsigned membaseconfig0; + unsigned membaseconfig1; + unsigned prechconfig_tp_cnt; + unsigned dpwrdn_cyc; + unsigned dsref_cyc; + unsigned concontrol; + /* Channel and Chip Selection */ + uint8_t dmc_channels; /* number of memory channels */ + uint8_t chips_per_channel; /* number of chips per channel */ + uint8_t chips_to_configure; /* number of chips to configure */ + uint8_t send_zq_init; /* 1 to send this command */ + unsigned impedance; /* drive strength impedeance */ + uint8_t gate_leveling_enable; /* check gate leveling is enabled */ +}; + +/** + * Get the correct memory timings for our selected memory type and speed. + * + * This function can be called from SPL or the main U-Boot. + * + * @return pointer to the memory timings that we should use + */ +struct mem_timings *clock_get_mem_timings(void); + +/* + * Initialize clock for the device + */ +void system_clock_init(void); +#endif diff --git a/board/samsung/smdk5250/dmc_common.c b/board/samsung/smdk5250/dmc_common.c new file mode 100644 index 0000000000..109602a2e6 --- /dev/null +++ b/board/samsung/smdk5250/dmc_common.c @@ -0,0 +1,199 @@ +/* + * Mem setup common file for different types of DDR present on SMDK5250 boards. + * + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/spl.h> + +#include "clock_init.h" +#include "setup.h" + +#define ZQ_INIT_TIMEOUT 10000 + +int dmc_config_zq(struct mem_timings *mem, + struct exynos5_phy_control *phy0_ctrl, + struct exynos5_phy_control *phy1_ctrl) +{ + unsigned long val = 0; + int i; + + /* + * ZQ Calibration: + * Select Driver Strength, + * long calibration for manual calibration + */ + val = PHY_CON16_RESET_VAL; + val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT; + val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT; + val |= ZQ_CLK_DIV_EN; + writel(val, &phy0_ctrl->phy_con16); + writel(val, &phy1_ctrl->phy_con16); + + /* Disable termination */ + if (mem->zq_mode_noterm) + val |= PHY_CON16_ZQ_MODE_NOTERM_MASK; + writel(val, &phy0_ctrl->phy_con16); + writel(val, &phy1_ctrl->phy_con16); + + /* ZQ_MANUAL_START: Enable */ + val |= ZQ_MANUAL_STR; + writel(val, &phy0_ctrl->phy_con16); + writel(val, &phy1_ctrl->phy_con16); + + /* ZQ_MANUAL_START: Disable */ + val &= ~ZQ_MANUAL_STR; + + /* + * Since we are manaully calibrating the ZQ values, + * we are looping for the ZQ_init to complete. + */ + i = ZQ_INIT_TIMEOUT; + while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { + sdelay(100); + i--; + } + if (!i) + return -1; + writel(val, &phy0_ctrl->phy_con16); + + i = ZQ_INIT_TIMEOUT; + while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { + sdelay(100); + i--; + } + if (!i) + return -1; + writel(val, &phy1_ctrl->phy_con16); + + return 0; +} + +void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode) +{ + unsigned long val; + + if (mode == DDR_MODE_DDR3) { + val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE; + writel(val, &dmc->phycontrol0); + } + + /* Update DLL Information: Force DLL Resyncronization */ + val = readl(&dmc->phycontrol0); + val |= FP_RSYNC; + writel(val, &dmc->phycontrol0); + + /* Reset Force DLL Resyncronization */ + val = readl(&dmc->phycontrol0); + val &= ~FP_RSYNC; + writel(val, &dmc->phycontrol0); +} + +void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc) +{ + int channel, chip; + + for (channel = 0; channel < mem->dmc_channels; channel++) { + unsigned long mask; + + mask = channel << DIRECT_CMD_CHANNEL_SHIFT; + for (chip = 0; chip < mem->chips_to_configure; chip++) { + int i; + + mask |= chip << DIRECT_CMD_CHIP_SHIFT; + + /* Sending NOP command */ + writel(DIRECT_CMD_NOP | mask, &dmc->directcmd); + + /* + * TODO(alim.akhtar@samsung.com): Do we need these + * delays? This one and the next were not there for + * DDR3. + */ + sdelay(0x10000); + + /* Sending EMRS/MRS commands */ + for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) { + writel(mem->direct_cmd_msr[i] | mask, + &dmc->directcmd); + sdelay(0x10000); + } + + if (mem->send_zq_init) { + /* Sending ZQINIT command */ + writel(DIRECT_CMD_ZQINIT | mask, + &dmc->directcmd); + + sdelay(10000); + } + } + } +} + +void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc) +{ + int channel, chip; + + for (channel = 0; channel < mem->dmc_channels; channel++) { + unsigned long mask; + + mask = channel << DIRECT_CMD_CHANNEL_SHIFT; + for (chip = 0; chip < mem->chips_per_channel; chip++) { + mask |= chip << DIRECT_CMD_CHIP_SHIFT; + + /* PALL (all banks precharge) CMD */ + writel(DIRECT_CMD_PALL | mask, &dmc->directcmd); + sdelay(0x10000); + } + } +} + +void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc) +{ + writel(mem->memconfig, &dmc->memconfig0); + writel(mem->memconfig, &dmc->memconfig1); + writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0); + writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1); +} + +void mem_ctrl_init() +{ + struct spl_machine_param *param = spl_get_machine_params(); + struct mem_timings *mem; + int ret; + + mem = clock_get_mem_timings(); + + /* If there are any other memory variant, add their init call below */ + if (param->mem_type == DDR_MODE_DDR3) { + ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size); + if (ret) { + /* will hang if failed to init memory control */ + while (1) + ; + } + } else { + /* will hang if unknow memory type */ + while (1) + ; + } +} diff --git a/board/samsung/smdk5250/dmc_init.c b/board/samsung/smdk5250/dmc_init.c deleted file mode 100644 index 7881074652..0000000000 --- a/board/samsung/smdk5250/dmc_init.c +++ /dev/null @@ -1,462 +0,0 @@ -/* - * Memory setup for SMDK5250 board based on EXYNOS5 - * - * Copyright (C) 2012 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/io.h> -#include <asm/arch/dmc.h> -#include <asm/arch/clock.h> -#include <asm/arch/cpu.h> -#include "setup.h" - -/* APLL : 1GHz */ -/* MCLK_CDREX: MCLK_CDREX_533*/ -/* LPDDR support: LPDDR2 */ -static void reset_phy_ctrl(void); -static void config_zq(struct exynos5_phy_control *, - struct exynos5_phy_control *); -static void update_reset_dll(struct exynos5_dmc *); -static void config_cdrex(void); -static void config_mrs(struct exynos5_dmc *); -static void sec_sdram_phy_init(struct exynos5_dmc *); -static void config_prech(struct exynos5_dmc *); -static void config_rdlvl(struct exynos5_dmc *, - struct exynos5_phy_control *, - struct exynos5_phy_control *); -static void config_memory(struct exynos5_dmc *); - -static void config_offsets(unsigned int, - struct exynos5_phy_control *, - struct exynos5_phy_control *); - -static void reset_phy_ctrl(void) -{ - struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - - writel(PHY_RESET_VAL, &clk->lpddr3phy_ctrl); - sdelay(0x10000); -} - -static void config_zq(struct exynos5_phy_control *phy0_ctrl, - struct exynos5_phy_control *phy1_ctrl) -{ - unsigned long val = 0; - /* - * ZQ Calibration: - * Select Driver Strength, - * long calibration for manual calibration - */ - val = PHY_CON16_RESET_VAL; - SET_ZQ_MODE_DDS_VAL(val); - SET_ZQ_MODE_TERM_VAL(val); - val |= ZQ_CLK_DIV_EN; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); - - /* Disable termination */ - val |= ZQ_MODE_NOTERM; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); - - /* ZQ_MANUAL_START: Enable */ - val |= ZQ_MANUAL_STR; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); - sdelay(0x10000); - - /* ZQ_MANUAL_START: Disable */ - val &= ~ZQ_MANUAL_STR; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); -} - -static void update_reset_dll(struct exynos5_dmc *dmc) -{ - unsigned long val; - /* - * Update DLL Information: - * Force DLL Resyncronization - */ - val = readl(&dmc->phycontrol0); - val |= FP_RSYNC; - writel(val, &dmc->phycontrol0); - - /* Reset Force DLL Resyncronization */ - val = readl(&dmc->phycontrol0); - val &= ~FP_RSYNC; - writel(val, &dmc->phycontrol0); -} - -static void config_mrs(struct exynos5_dmc *dmc) -{ - unsigned long channel, chip, mask = 0, val; - - for (channel = 0; channel < CONFIG_DMC_CHANNELS; channel++) { - SET_CMD_CHANNEL(mask, channel); - for (chip = 0; chip < CONFIG_CHIPS_PER_CHANNEL; chip++) { - /* - * NOP CMD: - * Assert and hold CKE to logic high level - */ - SET_CMD_CHIP(mask, chip); - val = DIRECT_CMD_NOP | mask; - writel(val, &dmc->directcmd); - sdelay(0x10000); - - /* EMRS, MRS Cmds(Mode Reg Settings) Using Direct Cmd */ - val = DIRECT_CMD_MRS1 | mask; - writel(val, &dmc->directcmd); - sdelay(0x10000); - - val = DIRECT_CMD_MRS2 | mask; - writel(val, &dmc->directcmd); - sdelay(0x10000); - - /* MCLK_CDREX_533 */ - val = DIRECT_CMD_MRS3 | mask; - writel(val, &dmc->directcmd); - sdelay(0x10000); - - val = DIRECT_CMD_MRS4 | mask; - writel(val, &dmc->directcmd); - sdelay(0x10000); - } - } -} - -static void config_prech(struct exynos5_dmc *dmc) -{ - unsigned long channel, chip, mask = 0, val; - - for (channel = 0; channel < CONFIG_DMC_CHANNELS; channel++) { - SET_CMD_CHANNEL(mask, channel); - for (chip = 0; chip < CONFIG_CHIPS_PER_CHANNEL; chip++) { - SET_CMD_CHIP(mask, chip); - /* PALL (all banks precharge) CMD */ - val = DIRECT_CMD_PALL | mask; - writel(val, &dmc->directcmd); - sdelay(0x10000); - } - } -} - -static void sec_sdram_phy_init(struct exynos5_dmc *dmc) -{ - unsigned long val; - val = readl(&dmc->concontrol); - val |= DFI_INIT_START; - writel(val, &dmc->concontrol); - sdelay(0x10000); - - val = readl(&dmc->concontrol); - val &= ~DFI_INIT_START; - writel(val, &dmc->concontrol); -} - -static void config_offsets(unsigned int state, - struct exynos5_phy_control *phy0_ctrl, - struct exynos5_phy_control *phy1_ctrl) -{ - unsigned long val; - /* Set Offsets to read DQS */ - val = (state == SET) ? SET_DQS_OFFSET_VAL : RESET_DQS_OFFSET_VAL; - writel(val, &phy0_ctrl->phy_con4); - writel(val, &phy1_ctrl->phy_con4); - - /* Set Offsets to read DQ */ - val = (state == SET) ? SET_DQ_OFFSET_VAL : RESET_DQ_OFFSET_VAL; - writel(val, &phy0_ctrl->phy_con6); - writel(val, &phy1_ctrl->phy_con6); - - /* Debug Offset */ - val = (state == SET) ? SET_DEBUG_OFFSET_VAL : RESET_DEBUG_OFFSET_VAL; - writel(val, &phy0_ctrl->phy_con10); - writel(val, &phy1_ctrl->phy_con10); -} - -static void config_cdrex(void) -{ - struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex); - writel(CLK_SRC_CDREX_VAL, &clk->src_cdrex); - sdelay(0x30000); -} - -static void config_ctrl_dll_on(unsigned int state, - unsigned int ctrl_force_val, - struct exynos5_phy_control *phy0_ctrl, - struct exynos5_phy_control *phy1_ctrl) -{ - unsigned long val; - val = readl(&phy0_ctrl->phy_con12); - CONFIG_CTRL_DLL_ON(val, state); - SET_CTRL_FORCE_VAL(val, ctrl_force_val); - writel(val, &phy0_ctrl->phy_con12); - - val = readl(&phy1_ctrl->phy_con12); - CONFIG_CTRL_DLL_ON(val, state); - SET_CTRL_FORCE_VAL(val, ctrl_force_val); - writel(val, &phy1_ctrl->phy_con12); -} - -static void config_ctrl_start(unsigned int state, - struct exynos5_phy_control *phy0_ctrl, - struct exynos5_phy_control *phy1_ctrl) -{ - unsigned long val; - val = readl(&phy0_ctrl->phy_con12); - CONFIG_CTRL_START(val, state); - writel(val, &phy0_ctrl->phy_con12); - - val = readl(&phy1_ctrl->phy_con12); - CONFIG_CTRL_START(val, state); - writel(val, &phy1_ctrl->phy_con12); -} - -#if defined(CONFIG_RD_LVL) -static void config_rdlvl(struct exynos5_dmc *dmc, - struct exynos5_phy_control *phy0_ctrl, - struct exynos5_phy_control *phy1_ctrl) -{ - unsigned long val; - - /* Disable CTRL_DLL_ON and set ctrl_force */ - config_ctrl_dll_on(RESET, 0x2D, phy0_ctrl, phy1_ctrl); - - /* - * Set ctrl_gateadj, ctrl_readadj - * ctrl_gateduradj, rdlvl_pass_adj - * rdlvl_rddataPadj - */ - val = SET_RDLVL_RDDATAPADJ; - writel(val, &phy0_ctrl->phy_con1); - writel(val, &phy1_ctrl->phy_con1); - - /* LPDDR2 Address */ - writel(LPDDR2_ADDR, &phy0_ctrl->phy_con22); - writel(LPDDR2_ADDR, &phy1_ctrl->phy_con22); - - /* Enable Byte Read Leveling set ctrl_ddr_mode */ - val = readl(&phy0_ctrl->phy_con0); - val |= BYTE_RDLVL_EN; - writel(val, &phy0_ctrl->phy_con0); - val = readl(&phy1_ctrl->phy_con0); - val |= BYTE_RDLVL_EN; - writel(val, &phy1_ctrl->phy_con0); - - /* rdlvl_en: Use levelling offset instead ctrl_shiftc */ - val = PHY_CON2_RESET_VAL | RDLVL_EN; - writel(val, &phy0_ctrl->phy_con2); - writel(val, &phy1_ctrl->phy_con2); - sdelay(0x10000); - - /* Enable Data Eye Training */ - val = readl(&dmc->rdlvl_config); - val |= CTRL_RDLVL_DATA_EN; - writel(val, &dmc->rdlvl_config); - sdelay(0x10000); - - /* Disable Data Eye Training */ - val = readl(&dmc->rdlvl_config); - val &= ~CTRL_RDLVL_DATA_EN; - writel(val, &dmc->rdlvl_config); - - /* RdDeSkew_clear: Clear */ - val = readl(&phy0_ctrl->phy_con2); - val |= RDDSKEW_CLEAR; - writel(val, &phy0_ctrl->phy_con2); - val = readl(&phy1_ctrl->phy_con2); - val |= RDDSKEW_CLEAR; - writel(val, &phy1_ctrl->phy_con2); - - /* Enable CTRL_DLL_ON */ - config_ctrl_dll_on(SET, 0x0, phy0_ctrl, phy1_ctrl); - - update_reset_dll(dmc); - sdelay(0x10000); - - /* ctrl_atgte: ctrl_gate_p*, ctrl_read_p* generated by PHY */ - val = readl(&phy0_ctrl->phy_con0); - val &= ~CTRL_ATGATE; - writel(val, &phy0_ctrl->phy_con0); - val = readl(&phy1_ctrl->phy_con0); - val &= ~CTRL_ATGATE; - writel(val, &phy1_ctrl->phy_con0); -} -#endif - -static void config_memory(struct exynos5_dmc *dmc) -{ - /* - * Memory Configuration Chip 0 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - writel(DMC_MEMCONFIG0_VAL, &dmc->memconfig0); - - /* - * Memory Configuration Chip 1 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - writel(DMC_MEMCONFIG1_VAL, &dmc->memconfig1); - - /* - * Chip0: AXI - * AXI Base Address: 0x40000000 - * AXI Base Address Mask: 0x780 - */ - writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0); - - /* - * Chip1: AXI - * AXI Base Address: 0x80000000 - * AXI Base Address Mask: 0x780 - */ - writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1); -} - -void mem_ctrl_init() -{ - struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl; - struct exynos5_dmc *dmc; - unsigned long val; - - phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE; - phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE; - dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE; - - /* Reset PHY Controllor: PHY_RESET[0] */ - reset_phy_ctrl(); - - /*set Read Latancy and Burst Length for PHY0 and PHY1 */ - writel(PHY_CON42_VAL, &phy0_ctrl->phy_con42); - writel(PHY_CON42_VAL, &phy1_ctrl->phy_con42); - - /* ZQ Cofiguration */ - config_zq(phy0_ctrl, phy1_ctrl); - - /* Operation Mode : LPDDR2 */ - val = PHY_CON0_RESET_VAL; - SET_CTRL_DDR_MODE(val, DDR_MODE_LPDDR2); - writel(val, &phy0_ctrl->phy_con0); - writel(val, &phy1_ctrl->phy_con0); - - /* DQS, DQ: Signal, for LPDDR2: Always Set */ - val = CTRL_PULLD_DQ | CTRL_PULLD_DQS; - writel(val, &phy0_ctrl->phy_con14); - writel(val, &phy1_ctrl->phy_con14); - - /* Init SEC SDRAM PHY */ - sec_sdram_phy_init(dmc); - sdelay(0x10000); - - update_reset_dll(dmc); - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 4 - * Number of chips: 2 - * Memory Bus width: 32 bit - * Memory Type: LPDDR2-S4 - * Additional Latancy for PLL: 1 Cycle - */ - writel(DMC_MEMCONTROL_VAL, &dmc->memcontrol); - - config_memory(dmc); - - /* Precharge Configuration */ - writel(DMC_PRECHCONFIG_VAL, &dmc->prechconfig); - - /* Power Down mode Configuration */ - writel(DMC_PWRDNCONFIG_VAL, &dmc->pwrdnconfig); - - /* Periodic Refrese Interval */ - writel(DMC_TIMINGREF_VAL, &dmc->timingref); - - /* - * TimingRow, TimingData, TimingPower Setting: - * Values as per Memory AC Parameters - */ - writel(DMC_TIMINGROW_VAL, &dmc->timingrow); - - writel(DMC_TIMINGDATA_VAL, &dmc->timingdata); - - writel(DMC_TIMINGPOWER_VAL, &dmc->timingpower); - - /* Memory Channel Inteleaving Size: 128 Bytes */ - writel(CONFIG_IV_SIZE, &dmc->ivcontrol); - - /* Set DQS, DQ and DEBUG offsets */ - config_offsets(SET, phy0_ctrl, phy1_ctrl); - - /* Disable CTRL_DLL_ON and set ctrl_force */ - config_ctrl_dll_on(RESET, 0x7F, phy0_ctrl, phy1_ctrl); - sdelay(0x10000); - - update_reset_dll(dmc); - - /* Config MRS(Mode Register Settingg) */ - config_mrs(dmc); - - config_cdrex(); - - /* Reset DQS DQ and DEBUG offsets */ - config_offsets(RESET, phy0_ctrl, phy1_ctrl); - - /* Enable CTRL_DLL_ON */ - config_ctrl_dll_on(SET, 0x0, phy0_ctrl, phy1_ctrl); - - /* Stop DLL Locking */ - config_ctrl_start(RESET, phy0_ctrl, phy1_ctrl); - sdelay(0x10000); - - /* Start DLL Locking */ - config_ctrl_start(SET, phy0_ctrl, phy1_ctrl); - sdelay(0x10000); - - update_reset_dll(dmc); - -#if defined(CONFIG_RD_LVL) - config_rdlvl(dmc, phy0_ctrl, phy1_ctrl); -#endif - config_prech(dmc); - - /* - * Dynamic Clock: Stops During Idle Period - * Dynamic Power Down: Enable - * Dynamic Self refresh: Enable - */ - val = readl(&dmc->memcontrol); - val |= CLK_STOP_EN | DPWRDN_EN | DSREF_EN; - writel(val, &dmc->memcontrol); - - /* Start Auto refresh */ - val = readl(&dmc->concontrol); - val |= AREF_EN; - writel(val, &dmc->concontrol); -} diff --git a/board/samsung/smdk5250/dmc_init_ddr3.c b/board/samsung/smdk5250/dmc_init_ddr3.c new file mode 100644 index 0000000000..e05079028a --- /dev/null +++ b/board/samsung/smdk5250/dmc_init_ddr3.c @@ -0,0 +1,228 @@ +/* + * DDR3 mem setup file for SMDK5250 board based on EXYNOS5 + * + * Copyright (C) 2012 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include <asm/arch/dmc.h> +#include "setup.h" +#include "clock_init.h" + +#define RDLVL_COMPLETE_TIMEOUT 10000 + +static void reset_phy_ctrl(void) +{ + struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; + + writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl); + writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl); +} + +int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) +{ + unsigned int val; + struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl; + struct exynos5_dmc *dmc; + int i; + + phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE; + phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE; + dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE; + + reset_phy_ctrl(); + + /* Set Impedance Output Driver */ + val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) | + (mem->impedance << CA_CKE_DRVR_DS_OFFSET) | + (mem->impedance << CA_CS_DRVR_DS_OFFSET) | + (mem->impedance << CA_ADR_DRVR_DS_OFFSET); + writel(val, &phy0_ctrl->phy_con39); + writel(val, &phy1_ctrl->phy_con39); + + /* Set Read Latency and Burst Length for PHY0 and PHY1 */ + val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) | + (mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT); + writel(val, &phy0_ctrl->phy_con42); + writel(val, &phy1_ctrl->phy_con42); + + /* ZQ Calibration */ + if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl)) + return SETUP_ERR_ZQ_CALIBRATION_FAILURE; + + /* DQ Signal */ + writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14); + writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14); + + writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) + | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT), + &dmc->concontrol); + + update_reset_dll(dmc, DDR_MODE_DDR3); + + /* DQS Signal */ + writel(mem->phy0_dqs, &phy0_ctrl->phy_con4); + writel(mem->phy1_dqs, &phy1_ctrl->phy_con4); + + writel(mem->phy0_dq, &phy0_ctrl->phy_con6); + writel(mem->phy1_dq, &phy1_ctrl->phy_con6); + + writel(mem->phy0_tFS, &phy0_ctrl->phy_con10); + writel(mem->phy1_tFS, &phy1_ctrl->phy_con10); + + val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) | + (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | + (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) | + (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); + writel(val, &phy0_ctrl->phy_con12); + writel(val, &phy1_ctrl->phy_con12); + + /* Start DLL locking */ + writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), + &phy0_ctrl->phy_con12); + writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), + &phy1_ctrl->phy_con12); + + update_reset_dll(dmc, DDR_MODE_DDR3); + + writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT), + &dmc->concontrol); + + /* Memory Channel Inteleaving Size */ + writel(mem->iv_size, &dmc->ivcontrol); + + writel(mem->memconfig, &dmc->memconfig0); + writel(mem->memconfig, &dmc->memconfig1); + writel(mem->membaseconfig0, &dmc->membaseconfig0); + writel(mem->membaseconfig1, &dmc->membaseconfig1); + + /* Precharge Configuration */ + writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT, + &dmc->prechconfig); + + /* Power Down mode Configuration */ + writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | + mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT, + &dmc->pwrdnconfig); + + /* TimingRow, TimingData, TimingPower and Timingaref + * values as per Memory AC parameters + */ + writel(mem->timing_ref, &dmc->timingref); + writel(mem->timing_row, &dmc->timingrow); + writel(mem->timing_data, &dmc->timingdata); + writel(mem->timing_power, &dmc->timingpower); + + /* Send PALL command */ + dmc_config_prech(mem, dmc); + + /* Send NOP, MRS and ZQINIT commands */ + dmc_config_mrs(mem, dmc); + + if (mem->gate_leveling_enable) { + val = PHY_CON0_RESET_VAL; + val |= P0_CMD_EN; + writel(val, &phy0_ctrl->phy_con0); + writel(val, &phy1_ctrl->phy_con0); + + val = PHY_CON2_RESET_VAL; + val |= INIT_DESKEW_EN; + writel(val, &phy0_ctrl->phy_con2); + writel(val, &phy1_ctrl->phy_con2); + + val = PHY_CON0_RESET_VAL; + val |= P0_CMD_EN; + val |= BYTE_RDLVL_EN; + writel(val, &phy0_ctrl->phy_con0); + writel(val, &phy1_ctrl->phy_con0); + + val = (mem->ctrl_start_point << + PHY_CON12_CTRL_START_POINT_SHIFT) | + (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | + (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) | + (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) | + (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); + writel(val, &phy0_ctrl->phy_con12); + writel(val, &phy1_ctrl->phy_con12); + + val = PHY_CON2_RESET_VAL; + val |= INIT_DESKEW_EN; + val |= RDLVL_GATE_EN; + writel(val, &phy0_ctrl->phy_con2); + writel(val, &phy1_ctrl->phy_con2); + + val = PHY_CON0_RESET_VAL; + val |= P0_CMD_EN; + val |= BYTE_RDLVL_EN; + val |= CTRL_SHGATE; + writel(val, &phy0_ctrl->phy_con0); + writel(val, &phy1_ctrl->phy_con0); + + val = PHY_CON1_RESET_VAL; + val &= ~(CTRL_GATEDURADJ_MASK); + writel(val, &phy0_ctrl->phy_con1); + writel(val, &phy1_ctrl->phy_con1); + + writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config); + i = RDLVL_COMPLETE_TIMEOUT; + while ((readl(&dmc->phystatus) & + (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) != + (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) { + /* + * TODO(waihong): Comment on how long this take to + * timeout + */ + sdelay(100); + i--; + } + if (!i) + return SETUP_ERR_RDLV_COMPLETE_TIMEOUT; + writel(CTRL_RDLVL_GATE_DISABLE, &dmc->rdlvl_config); + + writel(0, &phy0_ctrl->phy_con14); + writel(0, &phy1_ctrl->phy_con14); + + val = (mem->ctrl_start_point << + PHY_CON12_CTRL_START_POINT_SHIFT) | + (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | + (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) | + (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) | + (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) | + (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); + writel(val, &phy0_ctrl->phy_con12); + writel(val, &phy1_ctrl->phy_con12); + + update_reset_dll(dmc, DDR_MODE_DDR3); + } + + /* Send PALL command */ + dmc_config_prech(mem, dmc); + + writel(mem->memcontrol, &dmc->memcontrol); + + /* Set DMC Concontrol and enable auto-refresh counter */ + writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) + | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol); + return 0; +} diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h index 1276fd3e6b..a15960121c 100644 --- a/board/samsung/smdk5250/setup.h +++ b/board/samsung/smdk5250/setup.h @@ -1,5 +1,5 @@ /* - * Machine Specific Values for SMDK5250 board based on S5PC520 + * Machine Specific Values for SMDK5250 board based on EXYNOS5 * * Copyright (C) 2012 Samsung Electronics * @@ -26,12 +26,7 @@ #define _SMDK5250_SETUP_H #include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> - -/* GPIO Offsets for UART: GPIO Contol Register */ -#define EXYNOS5_GPIO_A0_CON_OFFSET 0x0 -#define EXYNOS5_GPIO_A1_CON_OFFSET 0x20 +#include <asm/arch/dmc.h> /* TZPC : Register Offsets */ #define TZPC0_BASE 0x10100000 @@ -45,295 +40,423 @@ #define TZPC8_BASE 0x10180000 #define TZPC9_BASE 0x10190000 -/* CLK_SRC_CPU */ -/* 0 = MOUTAPLL, 1 = SCLKMPLL */ -#define MUX_HPM_SEL 0 -#define MUX_CPU_SEL 0 -#define MUX_APLL_SEL 1 -#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \ - | (MUX_CPU_SEL << 16) \ - | (MUX_APLL_SEL)) - -/* CLK_DIV_CPU0 */ -#define ARM2_RATIO 0x0 -#define APLL_RATIO 0x1 -#define PCLK_DBG_RATIO 0x1 -#define ATB_RATIO 0x4 -#define PERIPH_RATIO 0x7 -#define ACP_RATIO 0x7 -#define CPUD_RATIO 0x2 -#define ARM_RATIO 0x0 -#define CLK_DIV_CPU0_VAL ((ARM2_RATIO << 28) \ - | (APLL_RATIO << 24) \ - | (PCLK_DBG_RATIO << 20) \ - | (ATB_RATIO << 16) \ - | (PERIPH_RATIO << 12) \ - | (ACP_RATIO << 8) \ - | (CPUD_RATIO << 4) \ - | (ARM_RATIO)) - -/* CLK_DIV_CPU1 */ -#define HPM_RATIO 0x4 -#define COPY_RATIO 0x0 -#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) \ - | (COPY_RATIO)) - -#define APLL_MDIV 0x7D -#define APLL_PDIV 0x3 -#define APLL_SDIV 0x0 - -#define MPLL_MDIV 0x64 -#define MPLL_PDIV 0x3 -#define MPLL_SDIV 0x0 - -#define CPLL_MDIV 0x96 -#define CPLL_PDIV 0x4 -#define CPLL_SDIV 0x0 - -/* APLL_CON1 */ +/* APLL_CON1 */ #define APLL_CON1_VAL (0x00203800) -/* MPLL_CON1 */ -#define MPLL_CON1_VAL (0x00203800) +/* MPLL_CON1 */ +#define MPLL_CON1_VAL (0x00203800) -/* CPLL_CON1 */ +/* CPLL_CON1 */ #define CPLL_CON1_VAL (0x00203800) -#define EPLL_MDIV 0x60 -#define EPLL_PDIV 0x3 -#define EPLL_SDIV 0x3 +/* GPLL_CON1 */ +#define GPLL_CON1_VAL (0x00203800) +/* EPLL_CON1, CON2 */ #define EPLL_CON1_VAL 0x00000000 #define EPLL_CON2_VAL 0x00000080 -#define VPLL_MDIV 0x96 -#define VPLL_PDIV 0x3 -#define VPLL_SDIV 0x2 - +/* VPLL_CON1, CON2 */ #define VPLL_CON1_VAL 0x00000000 #define VPLL_CON2_VAL 0x00000080 -#define BPLL_MDIV 0x215 -#define BPLL_PDIV 0xC -#define BPLL_SDIV 0x1 - +/* BPLL_CON1 */ #define BPLL_CON1_VAL 0x00203800 /* Set PLL */ #define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv) -#define APLL_CON0_VAL set_pll(APLL_MDIV, APLL_PDIV, APLL_SDIV) -#define MPLL_CON0_VAL set_pll(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV) -#define CPLL_CON0_VAL set_pll(CPLL_MDIV, CPLL_PDIV, CPLL_SDIV) -#define EPLL_CON0_VAL set_pll(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV) -#define VPLL_CON0_VAL set_pll(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV) -#define BPLL_CON0_VAL set_pll(BPLL_MDIV, BPLL_PDIV, BPLL_SDIV) +/* CLK_SRC_CPU */ +/* 0 = MOUTAPLL, 1 = SCLKMPLL */ +#define MUX_HPM_SEL 0 +#define MUX_CPU_SEL 0 +#define MUX_APLL_SEL 1 + +#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \ + | (MUX_CPU_SEL << 16) \ + | (MUX_APLL_SEL)) + +/* MEMCONTROL register bit fields */ +#define DMC_MEMCONTROL_CLK_STOP_DISABLE (0 << 0) +#define DMC_MEMCONTROL_DPWRDN_DISABLE (0 << 1) +#define DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE (0 << 2) +#define DMC_MEMCONTROL_TP_DISABLE (0 << 4) +#define DMC_MEMCONTROL_DSREF_DISABLE (0 << 5) +#define DMC_MEMCONTROL_DSREF_ENABLE (1 << 5) +#define DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(x) (x << 6) + +#define DMC_MEMCONTROL_MEM_TYPE_LPDDR3 (7 << 8) +#define DMC_MEMCONTROL_MEM_TYPE_DDR3 (6 << 8) +#define DMC_MEMCONTROL_MEM_TYPE_LPDDR2 (5 << 8) + +#define DMC_MEMCONTROL_MEM_WIDTH_32BIT (2 << 12) + +#define DMC_MEMCONTROL_NUM_CHIP_1 (0 << 16) +#define DMC_MEMCONTROL_NUM_CHIP_2 (1 << 16) + +#define DMC_MEMCONTROL_BL_8 (3 << 20) +#define DMC_MEMCONTROL_BL_4 (2 << 20) + +#define DMC_MEMCONTROL_PZQ_DISABLE (0 << 24) + +#define DMC_MEMCONTROL_MRR_BYTE_7_0 (0 << 25) +#define DMC_MEMCONTROL_MRR_BYTE_15_8 (1 << 25) +#define DMC_MEMCONTROL_MRR_BYTE_23_16 (2 << 25) +#define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25) + +/* MEMCONFIG0 register bit fields */ +#define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED (1 << 12) +#define DMC_MEMCONFIGx_CHIP_COL_10 (3 << 8) +#define DMC_MEMCONFIGx_CHIP_ROW_14 (2 << 4) +#define DMC_MEMCONFIGx_CHIP_ROW_15 (3 << 4) +#define DMC_MEMCONFIGx_CHIP_BANK_8 (3 << 0) + +#define DMC_MEMBASECONFIGx_CHIP_BASE(x) (x << 16) +#define DMC_MEMBASECONFIGx_CHIP_MASK(x) (x << 0) +#define DMC_MEMBASECONFIG_VAL(x) ( \ + DMC_MEMBASECONFIGx_CHIP_BASE(x) | \ + DMC_MEMBASECONFIGx_CHIP_MASK(0x780) \ +) + +#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40) +#define DMC_MEMBASECONFIG1_VAL DMC_MEMBASECONFIG_VAL(0x80) + +#define DMC_PRECHCONFIG_VAL 0xFF000000 +#define DMC_PWRDNCONFIG_VAL 0xFFFF00FF + +#define DMC_CONCONTROL_RESET_VAL 0x0FFF0000 +#define DFI_INIT_START (1 << 28) +#define EMPTY (1 << 8) +#define AREF_EN (1 << 5) + +#define DFI_INIT_COMPLETE_CHO (1 << 2) +#define DFI_INIT_COMPLETE_CH1 (1 << 3) + +#define RDLVL_COMPLETE_CHO (1 << 14) +#define RDLVL_COMPLETE_CH1 (1 << 15) + +#define CLK_STOP_EN (1 << 0) +#define DPWRDN_EN (1 << 1) +#define DSREF_EN (1 << 5) + +/* COJCONTROL register bit fields */ +#define DMC_CONCONTROL_IO_PD_CON_DISABLE (0 << 3) +#define DMC_CONCONTROL_AREF_EN_DISABLE (0 << 5) +#define DMC_CONCONTROL_EMPTY_DISABLE (0 << 8) +#define DMC_CONCONTROL_EMPTY_ENABLE (1 << 8) +#define DMC_CONCONTROL_RD_FETCH_DISABLE (0x0 << 12) +#define DMC_CONCONTROL_TIMEOUT_LEVEL0 (0xFFF << 16) +#define DMC_CONCONTROL_DFI_INIT_START_DISABLE (0 << 28) + +/* CLK_DIV_CPU0_VAL */ +#define CLK_DIV_CPU0_VAL ((ARM2_RATIO << 28) \ + | (APLL_RATIO << 24) \ + | (PCLK_DBG_RATIO << 20) \ + | (ATB_RATIO << 16) \ + | (PERIPH_RATIO << 12) \ + | (ACP_RATIO << 8) \ + | (CPUD_RATIO << 4) \ + | (ARM_RATIO)) + + +/* CLK_FSYS */ +#define CLK_SRC_FSYS0_VAL 0x66666 +#define CLK_DIV_FSYS0_VAL 0x0BB00000 + +/* CLK_DIV_CPU1 */ +#define HPM_RATIO 0x2 +#define COPY_RATIO 0x0 + +/* CLK_DIV_CPU1 = 0x00000003 */ +#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) \ + | (COPY_RATIO)) /* CLK_SRC_CORE0 */ -#define CLK_SRC_CORE0_VAL 0x00060000 +#define CLK_SRC_CORE0_VAL 0x00000000 /* CLK_SRC_CORE1 */ -#define CLK_SRC_CORE1_VAL 0x100 +#define CLK_SRC_CORE1_VAL 0x100 /* CLK_DIV_CORE0 */ -#define CLK_DIV_CORE0_VAL 0x120000 +#define CLK_DIV_CORE0_VAL 0x00120000 /* CLK_DIV_CORE1 */ -#define CLK_DIV_CORE1_VAL 0x07070700 +#define CLK_DIV_CORE1_VAL 0x07070700 + +/* CLK_DIV_SYSRGT */ +#define CLK_DIV_SYSRGT_VAL 0x00000111 + +/* CLK_DIV_ACP */ +#define CLK_DIV_ACP_VAL 0x12 + +/* CLK_DIV_SYSLFT */ +#define CLK_DIV_SYSLFT_VAL 0x00000311 /* CLK_SRC_CDREX */ -#define CLK_SRC_CDREX_INIT_VAL 0x1 -#define CLK_SRC_CDREX_VAL 0x111 +#define CLK_SRC_CDREX_VAL 0x1 /* CLK_DIV_CDREX */ -#define CLK_DIV_CDREX_INIT_VAL 0x71771111 - -#define MCLK_CDREX2_RATIO 0x0 -#define ACLK_EFCON_RATIO 0x1 -#define MCLK_DPHY_RATIO 0x0 -#define MCLK_CDREX_RATIO 0x0 +#define MCLK_CDREX2_RATIO 0x0 +#define ACLK_EFCON_RATIO 0x1 +#define MCLK_DPHY_RATIO 0x1 +#define MCLK_CDREX_RATIO 0x1 #define ACLK_C2C_200_RATIO 0x1 #define C2C_CLK_400_RATIO 0x1 -#define PCLK_CDREX_RATIO 0x3 +#define PCLK_CDREX_RATIO 0x1 #define ACLK_CDREX_RATIO 0x1 -#define CLK_DIV_CDREX_VAL ((MCLK_DPHY_RATIO << 20) \ - | (MCLK_CDREX_RATIO << 16) \ - | (ACLK_C2C_200_RATIO << 12) \ - | (C2C_CLK_400_RATIO << 8) \ - | (PCLK_CDREX_RATIO << 4) \ - | (ACLK_CDREX_RATIO)) -#define MCLK_EFPHY_RATIO 0x4 -#define CLK_DIV_CDREX2_VAL MCLK_EFPHY_RATIO +#define CLK_DIV_CDREX_VAL ((MCLK_DPHY_RATIO << 24) \ + | (C2C_CLK_400_RATIO << 6) \ + | (PCLK_CDREX_RATIO << 4) \ + | (ACLK_CDREX_RATIO)) -/* CLK_DIV_ACP */ -#define CLK_DIV_ACP_VAL 0x12 - -/* CLK_SRC_TOP0 */ -#define MUX_ACLK_300_GSCL_SEL 0x1 -#define MUX_ACLK_300_GSCL_MID_SEL 0x0 -#define MUX_ACLK_400_SEL 0x0 -#define MUX_ACLK_333_SEL 0x0 -#define MUX_ACLK_300_DISP1_SEL 0x1 -#define MUX_ACLK_300_DISP1_MID_SEL 0x0 -#define MUX_ACLK_200_SEL 0x0 -#define MUX_ACLK_166_SEL 0x0 -#define CLK_SRC_TOP0_VAL ((MUX_ACLK_300_GSCL_SEL << 25) \ - | (MUX_ACLK_300_GSCL_MID_SEL << 24) \ - | (MUX_ACLK_400_SEL << 20) \ - | (MUX_ACLK_333_SEL << 16) \ - | (MUX_ACLK_300_DISP1_SEL << 15) \ +/* CLK_SRC_TOP0 */ +#define MUX_ACLK_300_GSCL_SEL 0x0 +#define MUX_ACLK_300_GSCL_MID_SEL 0x0 +#define MUX_ACLK_400_G3D_MID_SEL 0x0 +#define MUX_ACLK_333_SEL 0x0 +#define MUX_ACLK_300_DISP1_SEL 0x0 +#define MUX_ACLK_300_DISP1_MID_SEL 0x0 +#define MUX_ACLK_200_SEL 0x0 +#define MUX_ACLK_166_SEL 0x0 +#define CLK_SRC_TOP0_VAL ((MUX_ACLK_300_GSCL_SEL << 25) \ + | (MUX_ACLK_300_GSCL_MID_SEL << 24) \ + | (MUX_ACLK_400_G3D_MID_SEL << 20) \ + | (MUX_ACLK_333_SEL << 16) \ + | (MUX_ACLK_300_DISP1_SEL << 15) \ | (MUX_ACLK_300_DISP1_MID_SEL << 14) \ - | (MUX_ACLK_200_SEL << 12) \ + | (MUX_ACLK_200_SEL << 12) \ | (MUX_ACLK_166_SEL << 8)) -/* CLK_SRC_TOP1 */ -#define MUX_ACLK_400_ISP_SEL 0x0 -#define MUX_ACLK_400_IOP_SEL 0x0 -#define MUX_ACLK_MIPI_HSI_TXBASE_SEL 0x0 -#define CLK_SRC_TOP1_VAL ((MUX_ACLK_400_ISP_SEL << 24) \ - |(MUX_ACLK_400_IOP_SEL << 20) \ - |(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16)) +/* CLK_SRC_TOP1 */ +#define MUX_ACLK_400_G3D_SEL 0x1 +#define MUX_ACLK_400_ISP_SEL 0x0 +#define MUX_ACLK_400_IOP_SEL 0x0 +#define MUX_ACLK_MIPI_HSI_TXBASE_SEL 0x0 +#define MUX_ACLK_300_GSCL_MID1_SEL 0x0 +#define MUX_ACLK_300_DISP1_MID1_SEL 0x0 +#define CLK_SRC_TOP1_VAL ((MUX_ACLK_400_G3D_SEL << 28) \ + |(MUX_ACLK_400_ISP_SEL << 24) \ + |(MUX_ACLK_400_IOP_SEL << 20) \ + |(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16) \ + |(MUX_ACLK_300_GSCL_MID1_SEL << 12) \ + |(MUX_ACLK_300_DISP1_MID1_SEL << 8)) /* CLK_SRC_TOP2 */ -#define MUX_BPLL_USER_SEL 0x1 -#define MUX_MPLL_USER_SEL 0x1 -#define MUX_VPLL_SEL 0x0 -#define MUX_EPLL_SEL 0x0 -#define MUX_CPLL_SEL 0x0 -#define VPLLSRC_SEL 0x0 -#define CLK_SRC_TOP2_VAL ((MUX_BPLL_USER_SEL << 24) \ - | (MUX_MPLL_USER_SEL << 20) \ - | (MUX_VPLL_SEL << 16) \ - | (MUX_EPLL_SEL << 12) \ - | (MUX_CPLL_SEL << 8) \ +#define MUX_GPLL_SEL 0x1 +#define MUX_BPLL_USER_SEL 0x0 +#define MUX_MPLL_USER_SEL 0x0 +#define MUX_VPLL_SEL 0x1 +#define MUX_EPLL_SEL 0x1 +#define MUX_CPLL_SEL 0x1 +#define VPLLSRC_SEL 0x0 +#define CLK_SRC_TOP2_VAL ((MUX_GPLL_SEL << 28) \ + | (MUX_BPLL_USER_SEL << 24) \ + | (MUX_MPLL_USER_SEL << 20) \ + | (MUX_VPLL_SEL << 16) \ + | (MUX_EPLL_SEL << 12) \ + | (MUX_CPLL_SEL << 8) \ | (VPLLSRC_SEL)) /* CLK_SRC_TOP3 */ -#define MUX_ACLK_333_SUB_SEL 0x1 -#define MUX_ACLK_400_SUB_SEL 0x1 -#define MUX_ACLK_266_ISP_SUB_SEL 0x1 -#define MUX_ACLK_266_GPS_SUB_SEL 0x1 -#define MUX_ACLK_300_GSCL_SUB_SEL 0x1 -#define MUX_ACLK_266_GSCL_SUB_SEL 0x1 -#define MUX_ACLK_300_DISP1_SUB_SEL 0x1 -#define MUX_ACLK_200_DISP1_SUB_SEL 0x1 -#define CLK_SRC_TOP3_VAL ((MUX_ACLK_333_SUB_SEL << 24) \ - | (MUX_ACLK_400_SUB_SEL << 20) \ - | (MUX_ACLK_266_ISP_SUB_SEL << 16) \ - | (MUX_ACLK_266_GPS_SUB_SEL << 12) \ - | (MUX_ACLK_300_GSCL_SUB_SEL << 10) \ - | (MUX_ACLK_266_GSCL_SUB_SEL << 8) \ - | (MUX_ACLK_300_DISP1_SUB_SEL << 6) \ - | (MUX_ACLK_200_DISP1_SUB_SEL << 4)) - -/* CLK_DIV_TOP0 */ -#define ACLK_300_RATIO 0x0 -#define ACLK_400_RATIO 0x3 -#define ACLK_333_RATIO 0x2 +#define MUX_ACLK_333_SUB_SEL 0x1 +#define MUX_ACLK_400_SUB_SEL 0x1 +#define MUX_ACLK_266_ISP_SUB_SEL 0x1 +#define MUX_ACLK_266_GPS_SUB_SEL 0x0 +#define MUX_ACLK_300_GSCL_SUB_SEL 0x1 +#define MUX_ACLK_266_GSCL_SUB_SEL 0x1 +#define MUX_ACLK_300_DISP1_SUB_SEL 0x1 +#define MUX_ACLK_200_DISP1_SUB_SEL 0x1 +#define CLK_SRC_TOP3_VAL ((MUX_ACLK_333_SUB_SEL << 24) \ + | (MUX_ACLK_400_SUB_SEL << 20) \ + | (MUX_ACLK_266_ISP_SUB_SEL << 16) \ + | (MUX_ACLK_266_GPS_SUB_SEL << 12) \ + | (MUX_ACLK_300_GSCL_SUB_SEL << 10) \ + | (MUX_ACLK_266_GSCL_SUB_SEL << 8) \ + | (MUX_ACLK_300_DISP1_SUB_SEL << 6) \ + | (MUX_ACLK_200_DISP1_SUB_SEL << 4)) + +/* CLK_DIV_TOP0 */ +#define ACLK_300_DISP1_RATIO 0x2 +#define ACLK_400_G3D_RATIO 0x0 +#define ACLK_333_RATIO 0x0 #define ACLK_266_RATIO 0x2 #define ACLK_200_RATIO 0x3 -#define ACLK_166_RATIO 0x5 +#define ACLK_166_RATIO 0x1 #define ACLK_133_RATIO 0x1 #define ACLK_66_RATIO 0x5 -#define CLK_DIV_TOP0_VAL ((ACLK_300_RATIO << 28) \ - | (ACLK_400_RATIO << 24) \ - | (ACLK_333_RATIO << 20) \ - | (ACLK_266_RATIO << 16) \ - | (ACLK_200_RATIO << 12) \ - | (ACLK_166_RATIO << 8) \ - | (ACLK_133_RATIO << 4) \ + +#define CLK_DIV_TOP0_VAL ((ACLK_300_DISP1_RATIO << 28) \ + | (ACLK_400_G3D_RATIO << 24) \ + | (ACLK_333_RATIO << 20) \ + | (ACLK_266_RATIO << 16) \ + | (ACLK_200_RATIO << 12) \ + | (ACLK_166_RATIO << 8) \ + | (ACLK_133_RATIO << 4) \ | (ACLK_66_RATIO)) -/* CLK_DIV_TOP1 */ -#define ACLK_MIPI_HSI_TX_BASE_RATIO 0x3 -#define ACLK_66_PRE_RATIO 0x1 -#define ACLK_400_ISP_RATIO 0x1 -#define ACLK_400_IOP_RATIO 0x1 -#define ACLK_300_GSCL_RATIO 0x0 -#define ACLK_266_GPS_RATIO 0x7 - -#define CLK_DIV_TOP1_VAL ((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \ - | (ACLK_66_PRE_RATIO << 24) \ - | (ACLK_400_ISP_RATIO << 20) \ - | (ACLK_400_IOP_RATIO << 16) \ - | (ACLK_300_GSCL_RATIO << 12) \ - | (ACLK_266_GPS_RATIO << 8)) - -/* APLL_LOCK */ -#define APLL_LOCK_VAL (0x3E8) -/* MPLL_LOCK */ -#define MPLL_LOCK_VAL (0x2F1) -/* CPLL_LOCK */ -#define CPLL_LOCK_VAL (0x3E8) -/* EPLL_LOCK */ -#define EPLL_LOCK_VAL (0x2321) -/* VPLL_LOCK */ -#define VPLL_LOCK_VAL (0x2321) -/* BPLL_LOCK */ -#define BPLL_LOCK_VAL (0x3E8) +/* CLK_DIV_TOP1 */ +#define ACLK_MIPI_HSI_TX_BASE_RATIO 0x3 +#define ACLK_66_PRE_RATIO 0x1 +#define ACLK_400_ISP_RATIO 0x1 +#define ACLK_400_IOP_RATIO 0x1 +#define ACLK_300_GSCL_RATIO 0x2 + +#define CLK_DIV_TOP1_VAL ((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \ + | (ACLK_66_PRE_RATIO << 24) \ + | (ACLK_400_ISP_RATIO << 20) \ + | (ACLK_400_IOP_RATIO << 16) \ + | (ACLK_300_GSCL_RATIO << 12)) + +/* APLL_LOCK */ +#define APLL_LOCK_VAL (0x546) +/* MPLL_LOCK */ +#define MPLL_LOCK_VAL (0x546) +/* CPLL_LOCK */ +#define CPLL_LOCK_VAL (0x546) +/* GPLL_LOCK */ +#define GPLL_LOCK_VAL (0x546) +/* EPLL_LOCK */ +#define EPLL_LOCK_VAL (0x3A98) +/* VPLL_LOCK */ +#define VPLL_LOCK_VAL (0x3A98) +/* BPLL_LOCK */ +#define BPLL_LOCK_VAL (0x546) + +#define MUX_APLL_SEL_MASK (1 << 0) +#define MUX_MPLL_SEL_MASK (1 << 8) +#define MPLL_SEL_MOUT_MPLLFOUT (2 << 8) +#define MUX_CPLL_SEL_MASK (1 << 8) +#define MUX_EPLL_SEL_MASK (1 << 12) +#define MUX_VPLL_SEL_MASK (1 << 16) +#define MUX_GPLL_SEL_MASK (1 << 28) +#define MUX_BPLL_SEL_MASK (1 << 0) +#define MUX_HPM_SEL_MASK (1 << 20) +#define HPM_SEL_SCLK_MPLL (1 << 21) +#define APLL_CON0_LOCKED (1 << 29) +#define MPLL_CON0_LOCKED (1 << 29) +#define BPLL_CON0_LOCKED (1 << 29) +#define CPLL_CON0_LOCKED (1 << 29) +#define EPLL_CON0_LOCKED (1 << 29) +#define GPLL_CON0_LOCKED (1 << 29) +#define VPLL_CON0_LOCKED (1 << 29) +#define CLK_REG_DISABLE 0x0 +#define TOP2_VAL 0x0110000 /* CLK_SRC_PERIC0 */ +#define PWM_SEL 0 +#define UART3_SEL 6 +#define UART2_SEL 6 +#define UART1_SEL 6 +#define UART0_SEL 6 +/* SRC_CLOCK = SCLK_MPLL */ +#define CLK_SRC_PERIC0_VAL ((PWM_SEL << 24) \ + | (UART3_SEL << 12) \ + | (UART2_SEL << 8) \ + | (UART1_SEL << 4) \ + | (UART0_SEL)) + +/* CLK_SRC_PERIC1 */ /* SRC_CLOCK = SCLK_MPLL */ -#define PWM_SEL 0 -#define UART4_SEL 6 -#define UART3_SEL 6 -#define UART2_SEL 6 -#define UART1_SEL 6 -#define UART0_SEL 6 -#define CLK_SRC_PERIC0_VAL ((PWM_SEL << 24) \ - | (UART4_SEL << 16) \ - | (UART3_SEL << 12) \ - | (UART2_SEL << 8) \ - | (UART1_SEL << 4) \ - | (UART0_SEL << 0)) - -#define CLK_SRC_FSYS_VAL 0x66666 -#define CLK_DIV_FSYS0_VAL 0x0BB00000 -#define CLK_DIV_FSYS1_VAL 0x000f000f -#define CLK_DIV_FSYS2_VAL 0x020f020f -#define CLK_DIV_FSYS3_VAL 0x000f - -/* CLK_DIV_PERIC0 */ -#define UART5_RATIO 8 -#define UART4_RATIO 8 -#define UART3_RATIO 8 -#define UART2_RATIO 8 -#define UART1_RATIO 8 -#define UART0_RATIO 8 -#define CLK_DIV_PERIC0_VAL ((UART4_RATIO << 16) \ - | (UART3_RATIO << 12) \ - | (UART2_RATIO << 8) \ - | (UART1_RATIO << 4) \ - | (UART0_RATIO << 0)) +#define SPI0_SEL 6 +#define SPI1_SEL 6 +#define SPI2_SEL 6 +#define CLK_SRC_PERIC1_VAL ((SPI2_SEL << 24) \ + | (SPI1_SEL << 20) \ + | (SPI0_SEL << 16)) + +/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */ +#define SPI0_ISP_SEL 6 +#define SPI1_ISP_SEL 6 +#define SCLK_SRC_ISP_VAL (SPI1_ISP_SEL << 4) \ + | (SPI0_ISP_SEL << 0) + +/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */ +#define SPI0_ISP_RATIO 0xf +#define SPI1_ISP_RATIO 0xf +#define SCLK_DIV_ISP_VAL (SPI1_ISP_RATIO << 12) \ + | (SPI0_ISP_RATIO << 0) + +/* CLK_DIV_PERIL0 */ +#define UART5_RATIO 7 +#define UART4_RATIO 7 +#define UART3_RATIO 7 +#define UART2_RATIO 7 +#define UART1_RATIO 7 +#define UART0_RATIO 7 + +#define CLK_DIV_PERIC0_VAL ((UART3_RATIO << 12) \ + | (UART2_RATIO << 8) \ + | (UART1_RATIO << 4) \ + | (UART0_RATIO)) +/* CLK_DIV_PERIC1 */ +#define SPI1_RATIO 0x7 +#define SPI0_RATIO 0xf +#define SPI1_SUB_RATIO 0x0 +#define SPI0_SUB_RATIO 0x0 +#define CLK_DIV_PERIC1_VAL ((SPI1_SUB_RATIO << 24) \ + | ((SPI1_RATIO << 16) \ + | (SPI0_SUB_RATIO << 8) \ + | (SPI0_RATIO << 0))) + +/* CLK_DIV_PERIC2 */ +#define SPI2_RATIO 0xf +#define SPI2_SUB_RATIO 0x0 +#define CLK_DIV_PERIC2_VAL ((SPI2_SUB_RATIO << 8) \ + | (SPI2_RATIO << 0)) /* CLK_DIV_PERIC3 */ #define PWM_RATIO 8 #define CLK_DIV_PERIC3_VAL (PWM_RATIO << 0) +/* CLK_DIV_FSYS2 */ +#define MMC2_RATIO_MASK 0xf +#define MMC2_RATIO_VAL 0x3 +#define MMC2_RATIO_OFFSET 0 + +#define MMC2_PRE_RATIO_MASK 0xff +#define MMC2_PRE_RATIO_VAL 0x9 +#define MMC2_PRE_RATIO_OFFSET 8 + +#define MMC3_RATIO_MASK 0xf +#define MMC3_RATIO_VAL 0x1 +#define MMC3_RATIO_OFFSET 16 + +#define MMC3_PRE_RATIO_MASK 0xff +#define MMC3_PRE_RATIO_VAL 0x0 +#define MMC3_PRE_RATIO_OFFSET 24 + /* CLK_SRC_LEX */ -#define CLK_SRC_LEX_VAL 0x0 +#define CLK_SRC_LEX_VAL 0x0 /* CLK_DIV_LEX */ -#define CLK_DIV_LEX_VAL 0x10 +#define CLK_DIV_LEX_VAL 0x10 /* CLK_DIV_R0X */ -#define CLK_DIV_R0X_VAL 0x10 +#define CLK_DIV_R0X_VAL 0x10 /* CLK_DIV_L0X */ -#define CLK_DIV_R1X_VAL 0x10 +#define CLK_DIV_R1X_VAL 0x10 -/* SCLK_SRC_ISP */ -#define SCLK_SRC_ISP_VAL 0x600 /* CLK_DIV_ISP0 */ -#define CLK_DIV_ISP0_VAL 0x31 +#define CLK_DIV_ISP0_VAL 0x31 /* CLK_DIV_ISP1 */ -#define CLK_DIV_ISP1_VAL 0x0 +#define CLK_DIV_ISP1_VAL 0x0 /* CLK_DIV_ISP2 */ -#define CLK_DIV_ISP2_VAL 0x1 +#define CLK_DIV_ISP2_VAL 0x1 + +/* CLK_SRC_DISP1_0 */ +#define CLK_SRC_DISP1_0_VAL 0x6 + +/* + * DIV_DISP1_0 + * For DP, divisor should be 2 + */ +#define CLK_DIV_DISP1_0_FIMD1 (2 << 0) -#define MPLL_DEC (MPLL_MDIV * MPLL_MDIV / (MPLL_PDIV * 2^(MPLL_SDIV-1))) +/* CLK_GATE_IP_DISP1 */ +#define CLK_GATE_DP1_ALLOW (1 << 4) /* * TZPC Register Value : @@ -347,105 +470,125 @@ */ #define DECPROTXSET 0xFF -/* DMC Init */ -#define SET 1 -#define RESET 0 -/* (Memory Interleaving Size = 1 << IV_SIZE) */ -#define CONFIG_IV_SIZE 0x07 +#define DDR3PHY_CTRL_PHY_RESET (1 << 0) +#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0) -#define PHY_RESET_VAL (0 << 0) +#define PHY_CON0_RESET_VAL 0x17020a40 +#define P0_CMD_EN (1 << 14) +#define BYTE_RDLVL_EN (1 << 13) +#define CTRL_SHGATE (1 << 8) + +#define PHY_CON1_RESET_VAL 0x09210100 +#define CTRL_GATEDURADJ_MASK (0xf << 20) + +#define PHY_CON2_RESET_VAL 0x00010004 +#define INIT_DESKEW_EN (1 << 6) +#define RDLVL_GATE_EN (1 << 24) /*ZQ Configurations */ #define PHY_CON16_RESET_VAL 0x08000304 -#define ZQ_MODE_DDS_VAL (0x5 << 24) -#define ZQ_MODE_TERM_VAL (0x5 << 21) -#define SET_ZQ_MODE_DDS_VAL(x) (x = (x & ~(0x7 << 24)) | ZQ_MODE_DDS_VAL) -#define SET_ZQ_MODE_TERM_VAL(x) (x = (x & ~(0x7 << 21)) | ZQ_MODE_TERM_VAL) - -#define ZQ_MODE_NOTERM (1 << 19) #define ZQ_CLK_DIV_EN (1 << 18) #define ZQ_MANUAL_STR (1 << 1) +#define ZQ_DONE (1 << 0) + +#define CTRL_RDLVL_GATE_ENABLE 1 +#define CTRL_RDLVL_GATE_DISABLE 1 + +/* Direct Command */ +#define DIRECT_CMD_NOP 0x07000000 +#define DIRECT_CMD_PALL 0x01000000 +#define DIRECT_CMD_ZQINIT 0x0a000000 +#define DIRECT_CMD_CHANNEL_SHIFT 28 +#define DIRECT_CMD_CHIP_SHIFT 20 + +/* DMC PHY Control0 register */ +#define PHY_CONTROL0_RESET_VAL 0x0 +#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */ +#define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */ +#define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */ +#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */ + +/* Driver strength for CK, CKE, CS & CA */ +#define IMP_OUTPUT_DRV_40_OHM 0x5 +#define IMP_OUTPUT_DRV_30_OHM 0x7 +#define CA_CK_DRVR_DS_OFFSET 9 +#define CA_CKE_DRVR_DS_OFFSET 6 +#define CA_CS_DRVR_DS_OFFSET 3 +#define CA_ADR_DRVR_DS_OFFSET 0 + +#define PHY_CON42_CTRL_BSTLEN_SHIFT 8 +#define PHY_CON42_CTRL_RDLAT_SHIFT 0 + +struct mem_timings; + +/* Errors that we can encourter in low-level setup */ +enum { + SETUP_ERR_OK, + SETUP_ERR_RDLV_COMPLETE_TIMEOUT = -1, + SETUP_ERR_ZQ_CALIBRATION_FAILURE = -2, +}; -/* Channel and Chip Selection */ -#define CONFIG_DMC_CHANNELS 2 -#define CONFIG_CHIPS_PER_CHANNEL 2 - -#define SET_CMD_CHANNEL(x, y) (x = (x & ~(1 << 28)) | y << 28) -#define SET_CMD_CHIP(x, y) (x = (x & ~(1 << 20)) | y << 20) - -/* Diret Command */ -#define DIRECT_CMD_NOP 0x07000000 -#define DIRECT_CMD_MRS1 0x00071C00 -#define DIRECT_CMD_MRS2 0x00010BFC -#define DIRECT_CMD_MRS3 0x00000708 -#define DIRECT_CMD_MRS4 0x00000818 -#define DIRECT_CMD_PALL 0x01000000 - -/* DLL Resync */ -#define FP_RSYNC (1 << 3) - -#define CONFIG_CTRL_DLL_ON(x, y) (x = (x & ~(1 << 5)) | y << 5) -#define CONFIG_CTRL_START(x, y) (x = (x & ~(1 << 6)) | y << 6) -#define SET_CTRL_FORCE_VAL(x, y) (x = (x & ~(0x7F << 8)) | y << 8) +/* + * Memory variant specific initialization code + * + * @param mem Memory timings for this memory type. + * @param mem_iv_size Memory interleaving size is a configurable parameter + * which the DMC uses to decide how to split a memory + * chunk into smaller chunks to support concurrent + * accesses; may vary across boards. + * @return 0 if ok, SETUP_ERR_... if there is a problem + */ +int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size); -/* RDLVL */ -#define PHY_CON0_RESET_VAL 0x17023240 -#define DDR_MODE_LPDDR2 0x2 -#define BYTE_RDLVL_EN (1 << 13) -#define CTRL_ATGATE (1 << 6) -#define SET_CTRL_DDR_MODE(x, y) (x = (x & ~(0x3 << 11)) | y << 11) +/* + * Configure ZQ I/O interface + * + * @param mem Memory timings for this memory type. + * @param phy0_ctrl Pointer to struct containing PHY0 control reg + * @param phy1_ctrl Pointer to struct containing PHY1 control reg + * @return 0 if ok, -1 on error + */ +int dmc_config_zq(struct mem_timings *mem, + struct exynos5_phy_control *phy0_ctrl, + struct exynos5_phy_control *phy1_ctrl); -#define PHY_CON1_RESET_VAL 0x9210100 -#define RDLVL_RDDATAPADJ 0x1 -#define SET_RDLVL_RDDATAPADJ ((PHY_CON1_RESET_VAL & ~(0xFFFF << 0))\ - | RDLVL_RDDATAPADJ << 0) +/* + * Send NOP and MRS/EMRS Direct commands + * + * @param mem Memory timings for this memory type. + * @param dmc Pointer to struct of DMC registers + */ +void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc); -#define PHY_CON2_RESET_VAL 0x00010004 -#define RDLVL_EN (1 << 25) -#define RDDSKEW_CLEAR (1 << 13) - -#define CTRL_RDLVL_DATA_EN (1 << 1) -#define LPDDR2_ADDR 0x00000208 - -#define DMC_MEMCONFIG0_VAL 0x00001323 -#define DMC_MEMCONFIG1_VAL 0x00001323 -#define DMC_MEMBASECONFIG0_VAL 0x00400780 -#define DMC_MEMBASECONFIG1_VAL 0x00800780 -#define DMC_MEMCONTROL_VAL 0x00212500 -#define DMC_PRECHCONFIG_VAL 0xFF000000 -#define DMC_PWRDNCONFIG_VAL 0xFFFF00FF -#define DMC_TIMINGREF_VAL 0x0000005D -#define DMC_TIMINGROW_VAL 0x2336544C -#define DMC_TIMINGDATA_VAL 0x24202408 -#define DMC_TIMINGPOWER_VAL 0x38260235 - -#define CTRL_BSTLEN 0x04 -#define CTRL_RDLAT 0x08 -#define PHY_CON42_VAL (CTRL_BSTLEN << 8 | CTRL_RDLAT << 0) - -/* DQS, DQ, DEBUG offsets */ -#define SET_DQS_OFFSET_VAL 0x7F7F7F7F -#define SET_DQ_OFFSET_VAL 0x7F7F7F7F -#define SET_DEBUG_OFFSET_VAL 0x7F - -#define RESET_DQS_OFFSET_VAL 0x08080808 -#define RESET_DQ_OFFSET_VAL 0x08080808 -#define RESET_DEBUG_OFFSET_VAL 0x8 - -#define CTRL_PULLD_DQ (0x0F << 8) -#define CTRL_PULLD_DQS (0x0F << 0) +/* + * Send PALL Direct commands + * + * @param mem Memory timings for this memory type. + * @param dmc Pointer to struct of DMC registers + */ +void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc); -#define DFI_INIT_START (1 << 28) +/* + * Configure the memconfig and membaseconfig registers + * + * @param mem Memory timings for this memory type. + * @param exynos5_dmc Pointer to struct of DMC registers + */ +void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc); -#define CLK_STOP_EN (1 << 0) -#define DPWRDN_EN (1 << 1) -#define DSREF_EN (1 << 5) +/* + * Reset the DLL. This function is common between DDR3 and LPDDR2. + * However, the reset value is different. So we are passing a flag + * ddr_mode to distinguish between LPDDR2 and DDR3. + * + * @param exynos5_dmc Pointer to struct of DMC registers + * @param ddr_mode Type of DDR memory + */ +void update_reset_dll(struct exynos5_dmc *, enum ddr_mode); -#define AREF_EN (1 << 5) void sdelay(unsigned long); void mem_ctrl_init(void); void system_clock_init(void); void tzpc_init(void); - #endif diff --git a/board/samsung/smdk5250/smdk5250-uboot-spl.lds b/board/samsung/smdk5250/smdk5250-uboot-spl.lds new file mode 100644 index 0000000000..d78dd77efd --- /dev/null +++ b/board/samsung/smdk5250/smdk5250-uboot-spl.lds @@ -0,0 +1,66 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * Copyright (C) 2012 Samsung Electronics + * + * Based on arch/arm/cpu/armv7/omap-common/u-boot-spl.lds + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE, \ + LENGTH = CONFIG_SPL_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) + +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/armv7/start.o (.text) + *(.text*) + } >.sram + . = ALIGN(4); + + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + . = ALIGN(4); + + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + . = ALIGN(4); + + /* Align .machine_param on 256 byte boundary for easier searching */ + .machine_param ALIGN(0x100) : { *(.machine_param) } >.sram + . = ALIGN(4); + + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end__ = .; + } >.sram +} diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index fae7d6f0ed..a5816e445c 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -131,13 +131,13 @@ int board_mmc_init(bd_t *bis) { int err; - err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); + err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); if (err) { - debug("SDMMC2 not configured\n"); + debug("SDMMC0 not configured\n"); return err; } - err = s5p_mmc_init(2, 4); + err = s5p_mmc_init(0, 8); return err; } #endif diff --git a/board/samsung/smdk5250/smdk5250_spl.c b/board/samsung/smdk5250/smdk5250_spl.c new file mode 100644 index 0000000000..1d453cafc2 --- /dev/null +++ b/board/samsung/smdk5250/smdk5250_spl.c @@ -0,0 +1,68 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/spl.h> +#include <asm/arch/clk.h> + +#define SIGNATURE 0xdeadbeef + +/* Parameters of early board initialization in SPL */ +static struct spl_machine_param machine_param + __attribute__((section(".machine_param"))) = { + .signature = SIGNATURE, + .version = 1, + .params = "vmubfasirM", + .size = sizeof(machine_param), + + .mem_iv_size = 0x1f, + .mem_type = DDR_MODE_DDR3, + + /* + * Set uboot_size to 0x100000 bytes. + * + * This is an overly conservative value chosen to accommodate all + * possible U-Boot image. You are advised to set this value to a + * smaller realistic size via scripts that modifies the .machine_param + * section of output U-Boot image. + */ + .uboot_size = 0x100000, + + .boot_source = BOOT_MODE_OM, + .frequency_mhz = 800, + .arm_freq_mhz = 1700, + .serial_base = 0x12c30000, + .i2c_base = 0x12c60000, + .mem_manuf = MEM_MANUF_SAMSUNG, +}; + +struct spl_machine_param *spl_get_machine_params(void) +{ + if (machine_param.signature != SIGNATURE) { + /* Will hang if SIGNATURE dont match */ + while (1) + ; + } + + return &machine_param; +} diff --git a/board/isee/igep0020/config.mk b/board/schulercontrol/sc_sps_1/Makefile index 7964621ac7..24a10032ae 100644 --- a/board/isee/igep0020/config.mk +++ b/board/schulercontrol/sc_sps_1/Makefile @@ -1,9 +1,6 @@ # -# (C) Copyright 2009 -# ISEE 2007 SL, <www.iseebcn.com> -# -# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu -# see http://www.ti.com/ for more information on Texas Instruments +# (C) Copyright 2000-2012 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project. @@ -23,11 +20,28 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# Physical Address: -# 8000'0000 (bank0) -# A000/0000 (bank1) -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) - -# For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80008000 + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +ifndef CONFIG_SPL_BUILD +COBJS := sc_sps_1.o +else +COBJS := spl_boot.o +endif + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/schulercontrol/sc_sps_1/sc_sps_1.c b/board/schulercontrol/sc_sps_1/sc_sps_1.c new file mode 100644 index 0000000000..fda191a395 --- /dev/null +++ b/board/schulercontrol/sc_sps_1/sc_sps_1.c @@ -0,0 +1,113 @@ +/* + * SchulerControl GmbH, SC_SPS_1 module + * + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux-mx28.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <linux/mii.h> +#include <miiphy.h> +#include <netdev.h> +#include <errno.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Functions + */ +int board_early_init_f(void) +{ + /* IO0 clock at 480MHz */ + mx28_set_ioclk(MXC_IOCLK0, 480000); + /* IO1 clock at 480MHz */ + mx28_set_ioclk(MXC_IOCLK1, 480000); + + /* SSP0 clock at 96MHz */ + mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); + /* SSP2 clock at 96MHz */ + mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); + +#ifdef CONFIG_CMD_USB + mxs_iomux_setup_pad(MX28_PAD_AUART1_CTS__USB0_OVERCURRENT); + mxs_iomux_setup_pad(MX28_PAD_AUART2_TX__GPIO_3_9 | + MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL); + gpio_direction_output(MX28_PAD_AUART2_TX__GPIO_3_9, 1); +#endif + + return 0; +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int dram_init(void) +{ + return mxs_dram_init(); +} + +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + return mxsmmc_initialize(bis, 0, NULL); +} +#endif + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + int ret; + + ret = cpu_eth_init(bis); + + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet, + CLKCTRL_ENET_TIME_SEL_MASK, + CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN); + + ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE); + if (ret) { + printf("FEC MXS: Unable to init FEC0\n"); + return ret; + } + + ret = fecmxc_initialize_multi(bis, 1, 1, MXS_ENET1_BASE); + if (ret) { + printf("FEC MXS: Unable to init FEC1\n"); + return ret; + } + + return ret; +} + +#endif diff --git a/board/schulercontrol/sc_sps_1/spl_boot.c b/board/schulercontrol/sc_sps_1/spl_boot.c new file mode 100644 index 0000000000..7fcbc1840a --- /dev/null +++ b/board/schulercontrol/sc_sps_1/spl_boot.c @@ -0,0 +1,165 @@ +/* + * SchulerControl GmbH, SC_SPS_1 module setup + * + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/iomux-mx28.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL) +#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL) + +const iomux_cfg_t iomux_setup[] = { + /* -- Strick 3 -- */ + + /* FEC Ethernet */ + MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET, + MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET, + + MX28_PAD_ENET0_TX_CLK__GPIO_4_5, /* ENET INT */ + + MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET, + + /* -- Strick 4 -- */ + + /* EMI */ + MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, + MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, + MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, + MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI, + MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI, + + MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, + + MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI, + MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI, + + MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, + MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, + + MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI, + MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI, + + /* -- Strick 5 -- */ + + /* MMC0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0, + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), + + /* SPI2 (for flash) */ + MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2, + MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2, + MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2, + MX28_PAD_SSP2_SS0__SSP2_D3 | + (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP), + + /* -- Strick 6 -- */ + + /* I2C */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* AUART0 */ + MX28_PAD_AUART0_TX__AUART0_TX, + MX28_PAD_AUART0_RX__AUART0_RX, + + /* MEGA interface */ + + /* Debug UART */ + MX28_PAD_PWM0__DUART_RX, + MX28_PAD_PWM1__DUART_TX, + + /* LED */ + MX28_PAD_GPMI_D00__GPIO_0_0 | MUX_CONFIG_LED, + MX28_PAD_GPMI_D03__GPIO_0_3 | MUX_CONFIG_LED, + MX28_PAD_GPMI_D06__GPIO_0_6 | MUX_CONFIG_LED, +}; + +void board_init_ll(void) +{ + mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); +} + +void mxs_adjust_memory_params(uint32_t *dram_vals) +{ + dram_vals[0x74 >> 2] = 0x0f02010a; +} diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile new file mode 100644 index 0000000000..a26dadc951 --- /dev/null +++ b/board/st-ericsson/snowball/Makefile @@ -0,0 +1,49 @@ +# +# Copyright (C) ST-Ericsson SA 2009 +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +CFLAGS += -D__RELEASE -D__STN_8500 +LIB = $(obj)lib$(BOARD).o + +COBJS := snowball.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/st-ericsson/snowball/db8500_pins.h b/board/st-ericsson/snowball/db8500_pins.h new file mode 100644 index 0000000000..e339cb86e2 --- /dev/null +++ b/board/st-ericsson/snowball/db8500_pins.h @@ -0,0 +1,745 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. + * The purpose is that GPIO config found in kernel should work by simply + * copy-paste it to U-boot. + * + * Ported to U-boot by: + * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> + ** + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + */ + +#ifndef __DB8500_PINS_H +#define __DB8500_PINS_H + +#include <asm/arch/db8500_pincfg.h> + +#define GPIO0_GPIO PIN_CFG(0, GPIO) +#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A) +#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B) +#define GPIO0_IP_TDO PIN_CFG(0, ALT_C) + +#define GPIO1_GPIO PIN_CFG(1, GPIO) +#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A) +#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B) +#define GPIO1_IP_TDI PIN_CFG(1, ALT_C) + +#define GPIO2_GPIO PIN_CFG(2, GPIO) +#define GPIO2_U0_RXD PIN_CFG(2, ALT_A) +#define GPIO2_NONE PIN_CFG(2, ALT_B) +#define GPIO2_IP_TMS PIN_CFG(2, ALT_C) + +#define GPIO3_GPIO PIN_CFG(3, GPIO) +#define GPIO3_U0_TXD PIN_CFG(3, ALT_A) +#define GPIO3_NONE PIN_CFG(3, ALT_B) +#define GPIO3_IP_TCK PIN_CFG(3, ALT_C) + +#define GPIO4_GPIO PIN_CFG(4, GPIO) +#define GPIO4_U1_RXD PIN_CFG(4, ALT_A) +#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP) +#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) + +#define GPIO5_GPIO PIN_CFG(5, GPIO) +#define GPIO5_U1_TXD PIN_CFG(5, ALT_A) +#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP) +#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) + +#define GPIO6_GPIO PIN_CFG(6, GPIO) +#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) +#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP) +#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) + +#define GPIO7_GPIO PIN_CFG(7, GPIO) +#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) +#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP) +#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) + +#define GPIO8_GPIO PIN_CFG(8, GPIO) +#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP) +#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP) + +#define GPIO9_GPIO PIN_CFG(9, GPIO) +#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP) +#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP) + +#define GPIO10_GPIO PIN_CFG(10, GPIO) +#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP) +#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP) +#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) + +#define GPIO11_GPIO PIN_CFG(11, GPIO) +#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP) +#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP) +#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) + +#define GPIO12_GPIO PIN_CFG(12, GPIO) +#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A) +#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B) + +#define GPIO13_GPIO PIN_CFG(13, GPIO) +#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A) + +#define GPIO14_GPIO PIN_CFG(14, GPIO) +#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A) + +#define GPIO15_GPIO PIN_CFG(15, GPIO) +#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A) +#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B) + +#define GPIO16_GPIO PIN_CFG(16, GPIO) +#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) +#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP) +#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) + +#define GPIO17_GPIO PIN_CFG(17, GPIO) +#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) +#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP) +#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) + +#define GPIO18_GPIO PIN_CFG(18, GPIO) +#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) +#define GPIO18_U2_RXD PIN_CFG(18, ALT_B) +#define GPIO18_MS_IEP PIN_CFG(18, ALT_C) + +#define GPIO19_GPIO PIN_CFG(19, GPIO) +#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) +#define GPIO19_U2_TXD PIN_CFG(19, ALT_B) +#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) + +#define GPIO20_GPIO PIN_CFG(20, GPIO) +#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) +#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) +#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) + +#define GPIO21_GPIO PIN_CFG(21, GPIO) +#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) +#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) +#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) + +#define GPIO22_GPIO PIN_CFG(22, GPIO) +#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) +#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) +#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) + +#define GPIO23_GPIO PIN_CFG(23, GPIO) +#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) +#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) +#define GPIO23_MS_CLK PIN_CFG(23, ALT_C) + +#define GPIO24_GPIO PIN_CFG(24, GPIO) +#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) +#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) +#define GPIO24_MS_BS PIN_CFG(24, ALT_C) + +#define GPIO25_GPIO PIN_CFG(25, GPIO) +#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) +#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) +#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) + +#define GPIO26_GPIO PIN_CFG(26, GPIO) +#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) +#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) +#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) + +#define GPIO27_GPIO PIN_CFG(27, GPIO) +#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) +#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) +#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) + +#define GPIO28_GPIO PIN_CFG(28, GPIO) +#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) +#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) +#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) + +#define GPIO29_GPIO PIN_CFG(29, GPIO) +#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A) +#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B) +#define GPIO29_U2_RXD PIN_CFG(29, ALT_C) + +#define GPIO30_GPIO PIN_CFG(30, GPIO) +#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) +#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B) +#define GPIO30_U2_TXD PIN_CFG(30, ALT_C) + +#define GPIO31_GPIO PIN_CFG(31, GPIO) +#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A) +#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B) +#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C) + +#define GPIO32_GPIO PIN_CFG(32, GPIO) +#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A) +#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B) +#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C) + +#define GPIO33_GPIO PIN_CFG(33, GPIO) +#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A) +#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B) +#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C) + +#define GPIO34_GPIO PIN_CFG(34, GPIO) +#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A) +#define GPIO34_NONE PIN_CFG(34, ALT_B) +#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C) + +#define GPIO35_GPIO PIN_CFG(35, GPIO) +#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A) +#define GPIO35_NONE PIN_CFG(35, ALT_B) +#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C) + +#define GPIO36_GPIO PIN_CFG(36, GPIO) +#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A) +#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B) +#define GPIO36_U0_RIn PIN_CFG(36, ALT_C) + +#define GPIO64_GPIO PIN_CFG(64, GPIO) +#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A) +#define GPIO64_KP_O1 PIN_CFG(64, ALT_B) +#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C) + +#define GPIO65_GPIO PIN_CFG(65, GPIO) +#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A) +#define GPIO65_KP_O0 PIN_CFG(65, ALT_B) +#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C) + +#define GPIO66_GPIO PIN_CFG(66, GPIO) +#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A) +#define GPIO66_KP_I1 PIN_CFG(66, ALT_B) +#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C) + +#define GPIO67_GPIO PIN_CFG(67, GPIO) +#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A) +#define GPIO67_KP_I0 PIN_CFG(67, ALT_B) +#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C) + +#define GPIO68_GPIO PIN_CFG(68, GPIO) +#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A) +#define GPIO68_KP_O7 PIN_CFG(68, ALT_B) +#define GPIO68_SM_CLE PIN_CFG(68, ALT_C) + +#define GPIO69_GPIO PIN_CFG(69, GPIO) +#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A) +#define GPIO69_KP_I7 PIN_CFG(69, ALT_B) +#define GPIO69_SM_ALE PIN_CFG(69, ALT_C) + +#define GPIO70_GPIO PIN_CFG(70, GPIO) +#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A) +#define GPIO70_KP_O5 PIN_CFG(70, ALT_B) +#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C) + +#define GPIO71_GPIO PIN_CFG(71, GPIO) +#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A) +#define GPIO71_KP_O4 PIN_CFG(71, ALT_B) +#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C) + +#define GPIO72_GPIO PIN_CFG(72, GPIO) +#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A) +#define GPIO72_KP_O3 PIN_CFG(72, ALT_B) +#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C) + +#define GPIO73_GPIO PIN_CFG(73, GPIO) +#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A) +#define GPIO73_KP_O2 PIN_CFG(73, ALT_B) +#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C) + +#define GPIO74_GPIO PIN_CFG(74, GPIO) +#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A) +#define GPIO74_KP_I5 PIN_CFG(74, ALT_B) +#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C) + +#define GPIO75_GPIO PIN_CFG(75, GPIO) +#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A) +#define GPIO75_KP_I4 PIN_CFG(75, ALT_B) +#define GPIO75_U2_RXD PIN_CFG(75, ALT_C) + +#define GPIO76_GPIO PIN_CFG(76, GPIO) +#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A) +#define GPIO76_KP_I3 PIN_CFG(76, ALT_B) +#define GPIO76_U2_TXD PIN_CFG(76, ALT_C) + +#define GPIO77_GPIO PIN_CFG(77, GPIO) +#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A) +#define GPIO77_KP_I2 PIN_CFG(77, ALT_B) +#define GPIO77_NONE PIN_CFG(77, ALT_C) + +#define GPIO78_GPIO PIN_CFG(78, GPIO) +#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A) +#define GPIO78_KP_O6 PIN_CFG(78, ALT_B) +#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C) + +#define GPIO79_GPIO PIN_CFG(79, GPIO) +#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A) +#define GPIO79_KP_I6 PIN_CFG(79, ALT_B) +#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C) + +#define GPIO80_GPIO PIN_CFG(80, GPIO) +#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A) +#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B) +#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C) + +#define GPIO81_GPIO PIN_CFG(81, GPIO) +#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A) +#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B) +#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C) + +#define GPIO82_GPIO PIN_CFG(82, GPIO) +#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A) +#define GPIO82_KP_O5 PIN_CFG(82, ALT_B) + +#define GPIO83_GPIO PIN_CFG(83, GPIO) +#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A) +#define GPIO83_KP_O4 PIN_CFG(83, ALT_B) + +#define GPIO84_GPIO PIN_CFG_PULL(84, GPIO, UP) +#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A) +#define GPIO84_KP_I5 PIN_CFG(84, ALT_B) + +#define GPIO85_GPIO PIN_CFG(85, GPIO) +#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A) +#define GPIO85_KP_I4 PIN_CFG(85, ALT_B) + +#define GPIO86_GPIO PIN_CFG(86, GPIO) +#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A) +#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B) +#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C) + +#define GPIO87_GPIO PIN_CFG(87, GPIO) +#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A) +#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B) +#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C) + +#define GPIO88_GPIO PIN_CFG(88, GPIO) +#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A) +#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B) +#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C) + +#define GPIO89_GPIO PIN_CFG(89, GPIO) +#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A) +#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B) +#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C) + +#define GPIO90_GPIO PIN_CFG(90, GPIO) +#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A) +#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B) +#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C) + +#define GPIO91_GPIO PIN_CFG(91, GPIO) +#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A) +#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B) +#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C) + +#define GPIO92_GPIO PIN_CFG(92, GPIO) +#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A) +#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B) +#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C) + +#define GPIO93_GPIO PIN_CFG(93, GPIO) +#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A) +#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B) +#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C) + +#define GPIO94_GPIO PIN_CFG(94, GPIO) +#define GPIO94_KP_O7 PIN_CFG(94, ALT_A) +#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B) +#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C) + +#define GPIO95_GPIO PIN_CFG(95, GPIO) +#define GPIO95_KP_I7 PIN_CFG(95, ALT_A) +#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B) +#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C) + +#define GPIO96_GPIO PIN_CFG(96, GPIO) +#define GPIO96_KP_O6 PIN_CFG(96, ALT_A) +#define GPIO96_SM_OEn PIN_CFG(96, ALT_B) +#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C) + +#define GPIO97_GPIO PIN_CFG(97, GPIO) +#define GPIO97_KP_I6 PIN_CFG(97, ALT_A) +#define GPIO97_SM_WEn PIN_CFG(97, ALT_B) +#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) + +#define GPIO128_GPIO PIN_CFG(128, GPIO) +#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) +#define GPIO128_SM_CKO PIN_CFG(128, ALT_B) + +#define GPIO129_GPIO PIN_CFG(129, GPIO) +#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) +#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) + +#define GPIO130_GPIO PIN_CFG(130, GPIO) +#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) +#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) +#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) + +#define GPIO131_GPIO PIN_CFG(131, GPIO) +#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) +#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) + +#define GPIO132_GPIO PIN_CFG(132, GPIO) +#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) +#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) + +#define GPIO133_GPIO PIN_CFG(133, GPIO) +#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) +#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) + +#define GPIO134_GPIO PIN_CFG(134, GPIO) +#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) +#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) + +#define GPIO135_GPIO PIN_CFG(135, GPIO) +#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) +#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) + +#define GPIO136_GPIO PIN_CFG(136, GPIO) +#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) +#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) + +#define GPIO137_GPIO PIN_CFG(137, GPIO) +#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) +#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) + +#define GPIO138_GPIO PIN_CFG(138, GPIO) +#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) +#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) + +#define GPIO139_GPIO PIN_CFG(139, GPIO) +#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A) +#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B) +#define GPIO139_KP_O8 PIN_CFG(139, ALT_C) + +#define GPIO140_GPIO PIN_CFG(140, GPIO) +#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A) +#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B) +#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C) + +#define GPIO141_GPIO PIN_CFG(141, GPIO) +#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A) +#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B) +#define GPIO141_KP_O9 PIN_CFG(141, ALT_C) + +#define GPIO142_GPIO PIN_CFG(142, GPIO) +#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A) +#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B) +#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C) + +#define GPIO143_GPIO PIN_CFG(143, GPIO) +#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A) + +#define GPIO144_GPIO PIN_CFG(144, GPIO) +#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A) + +#define GPIO145_GPIO PIN_CFG(145, GPIO) +#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A) + +#define GPIO146_GPIO PIN_CFG(146, GPIO) +#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) + +#define GPIO147_GPIO PIN_CFG(147, GPIO) +#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP) + +#define GPIO148_GPIO PIN_CFG(148, GPIO) +#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP) + +#define GPIO149_GPIO PIN_CFG(149, GPIO) +#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) +#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B) +#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C) + +#define GPIO150_GPIO PIN_CFG(150, GPIO) +#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A) +#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B) + +#define GPIO151_GPIO PIN_CFG(151, GPIO) +#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A) +#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B) +#define GPIO151_KP_O8 PIN_CFG(151, ALT_C) + +#define GPIO152_GPIO PIN_CFG(152, GPIO) +#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A) +#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B) +#define GPIO152_KP_O9 PIN_CFG(152, ALT_C) + +#define GPIO153_GPIO PIN_CFG(153, GPIO) +#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN) +#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) +#define GPIO153_U2_RXD PIN_CFG(153, ALT_C) + +#define GPIO154_GPIO PIN_CFG(154, GPIO) +#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN) +#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) +#define GPIO154_U2_TXD PIN_CFG(154, ALT_C) + +#define GPIO155_GPIO PIN_CFG(155, GPIO) +#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN) +#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) +#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) + +#define GPIO156_GPIO PIN_CFG(156, GPIO) +#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN) +#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) +#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) + +#define GPIO157_GPIO PIN_CFG(157, GPIO) +#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP) +#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) +#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) + +#define GPIO158_GPIO PIN_CFG(158, GPIO) +#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP) +#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) +#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) + +#define GPIO159_GPIO PIN_CFG(159, GPIO) +#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP) +#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) +#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) + +#define GPIO160_GPIO PIN_CFG(160, GPIO) +#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP) +#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) +#define GPIO160_NONE PIN_CFG(160, ALT_C) + +#define GPIO161_GPIO PIN_CFG(161, GPIO) +#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN) +#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) +#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) + +#define GPIO162_GPIO PIN_CFG(162, GPIO) +#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN) +#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) +#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) + +#define GPIO163_GPIO PIN_CFG(163, GPIO) +#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN) +#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) +#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) + +#define GPIO164_GPIO PIN_CFG(164, GPIO) +#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP) +#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) +#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) + +#define GPIO165_GPIO PIN_CFG(165, GPIO) +#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP) +#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) +#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) + +#define GPIO166_GPIO PIN_CFG(166, GPIO) +#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP) +#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) +#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) + +#define GPIO167_GPIO PIN_CFG(167, GPIO) +#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP) +#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) +#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) + +#define GPIO168_GPIO PIN_CFG(168, GPIO) +#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP) +#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) +#define GPIO168_NONE PIN_CFG(168, ALT_C) + +#define GPIO169_GPIO PIN_CFG(169, GPIO) +#define GPIO169_RF_PURn PIN_CFG(169, ALT_A) +#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B) +#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C) + +#define GPIO170_GPIO PIN_CFG(170, GPIO) +#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A) +#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B) +#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C) + +#define GPIO171_GPIO PIN_CFG(171, GPIO) +#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A) +#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B) +#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C) + +#define GPIO192_GPIO PIN_CFG(192, GPIO) +#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A) + +#define GPIO193_GPIO PIN_CFG(193, GPIO) +#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A) + +#define GPIO194_GPIO PIN_CFG(194, GPIO) +#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A) + +#define GPIO195_GPIO PIN_CFG(195, GPIO) +#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A) + +#define GPIO196_GPIO PIN_CFG(196, GPIO) +#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) + +#define GPIO197_GPIO PIN_CFG(197, GPIO) +#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) + +#define GPIO198_GPIO PIN_CFG(198, GPIO) +#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) + +#define GPIO199_GPIO PIN_CFG(199, GPIO) +#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) + +#define GPIO200_GPIO PIN_CFG(200, GPIO) +#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) + +#define GPIO201_GPIO PIN_CFG(201, GPIO) +#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) + +#define GPIO202_GPIO PIN_CFG(202, GPIO) +#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) +#define GPIO202_PWL PIN_CFG(202, ALT_B) +#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) + +#define GPIO203_GPIO PIN_CFG(203, GPIO) +#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) + +#define GPIO204_GPIO PIN_CFG(204, GPIO) +#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) + +#define GPIO205_GPIO PIN_CFG(205, GPIO) +#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) + +#define GPIO206_GPIO PIN_CFG(206, GPIO) +#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) + +#define GPIO207_GPIO PIN_CFG(207, GPIO) +#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) + +#define GPIO208_GPIO PIN_CFG(208, GPIO) +#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) + +#define GPIO209_GPIO PIN_CFG(209, GPIO) +#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A) +#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B) + +#define GPIO210_GPIO PIN_CFG(210, GPIO) +#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A) + +#define GPIO211_GPIO PIN_CFG(211, GPIO) +#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A) + +#define GPIO212_GPIO PIN_CFG(212, GPIO) +#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A) +#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B) + +#define GPIO213_GPIO PIN_CFG(213, GPIO) +#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A) +#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B) + +#define GPIO214_GPIO PIN_CFG(214, GPIO) +#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A) +#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B) + +#define GPIO215_GPIO PIN_CFG(215, GPIO) +#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) +#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) +#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) + +#define GPIO216_GPIO PIN_CFG(216, GPIO) +#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) +#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) +#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP) + +#define GPIO217_GPIO PIN_CFG(217, GPIO) +#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) +#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) +#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) + +#define GPIO218_GPIO PIN_CFG(218, GPIO) +#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) +#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) +#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP) + +#define GPIO219_GPIO PIN_CFG(219, GPIO) +#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) +#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B) + +#define GPIO220_GPIO PIN_CFG(220, GPIO) +#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A) +#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B) +#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C) + +#define GPIO221_GPIO PIN_CFG(221, GPIO) +#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A) +#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B) + +#define GPIO222_GPIO PIN_CFG(222, GPIO) +#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A) +#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B) + +#define GPIO223_GPIO PIN_CFG(223, GPIO) +#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A) +#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B) +#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C) + +#define GPIO224_GPIO PIN_CFG(224, GPIO) +#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A) +#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B) +#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C) + +#define GPIO225_GPIO PIN_CFG(225, GPIO) +#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A) +#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B) +#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C) + +#define GPIO226_GPIO PIN_CFG(226, GPIO) +#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A) +#define GPIO226_PWL PIN_CFG(226, ALT_B) +#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C) + +#define GPIO227_GPIO PIN_CFG(227, GPIO) +#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A) + +#define GPIO228_GPIO PIN_CFG(228, GPIO) +#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A) + +#define GPIO229_GPIO PIN_CFG(229, GPIO) +#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) +#define GPIO229_PWL PIN_CFG(229, ALT_B) +#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP) + +#define GPIO230_GPIO PIN_CFG(230, GPIO) +#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) +#define GPIO230_PWL PIN_CFG(230, ALT_B) +#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP) + +#define GPIO256_GPIO PIN_CFG(256, GPIO) +#define GPIO256_USB_NXT PIN_CFG(256, ALT_A) + +#define GPIO257_GPIO PIN_CFG(257, GPIO) +#define GPIO257_USB_STP PIN_CFG(257, ALT_A) + +#define GPIO258_GPIO PIN_CFG(258, GPIO) +#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A) +#define GPIO258_NONE PIN_CFG(258, ALT_B) +#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C) + +#define GPIO259_GPIO PIN_CFG(259, GPIO) +#define GPIO259_USB_DIR PIN_CFG(259, ALT_A) + +#define GPIO260_GPIO PIN_CFG(260, GPIO) +#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A) + +#define GPIO261_GPIO PIN_CFG(261, GPIO) +#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A) + +#define GPIO262_GPIO PIN_CFG(262, GPIO) +#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A) + +#define GPIO263_GPIO PIN_CFG(263, GPIO) +#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A) + +#define GPIO264_GPIO PIN_CFG(264, GPIO) +#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A) + +#define GPIO265_GPIO PIN_CFG(265, GPIO) +#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A) + +#define GPIO266_GPIO PIN_CFG(266, GPIO) +#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A) + +#define GPIO267_GPIO PIN_CFG(267, GPIO) +#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A) + +#endif diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c new file mode 100644 index 0000000000..8c743c0adb --- /dev/null +++ b/board/st-ericsson/snowball/snowball.c @@ -0,0 +1,348 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <config.h> +#include <common.h> +#include <malloc.h> +#include <i2c.h> +#include <mmc.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/db8500_pincfg.h> +#include <asm/arch/prcmu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> + +#ifdef CONFIG_MMC +#include "../../../drivers/mmc/arm_pl180_mmci.h" +#endif +#include "db8500_pins.h" + +/* + * Get a global data pointer + */ +DECLARE_GLOBAL_DATA_PTR; + +/* + * Memory controller register + */ +#define DMC_BASE_ADDR 0x80156000 +#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184) + +/* + * GPIO pin config common for MOP500/HREF boards + */ +unsigned long gpio_cfg_common[] = { + /* I2C */ + GPIO147_I2C0_SCL, + GPIO148_I2C0_SDA, + GPIO16_I2C1_SCL, + GPIO17_I2C1_SDA, + GPIO10_I2C2_SDA, + GPIO11_I2C2_SCL, + GPIO229_I2C3_SDA, + GPIO230_I2C3_SCL, + + /* SSP0, to AB8500 */ + GPIO143_SSP0_CLK, + GPIO144_SSP0_FRM, + GPIO145_SSP0_RXD | PIN_PULL_DOWN, + GPIO146_SSP0_TXD, + + /* MMC0 (MicroSD card) */ + GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH, + GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH, + GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH, + GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, + GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL, + GPIO23_MC0_CLK | PIN_OUTPUT_LOW, + GPIO24_MC0_CMD | PIN_INPUT_PULLUP, + GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP, + GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP, + GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP, + GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP, + + /* MMC4 (On-board eMMC) */ + GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP, + GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP, + GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP, + GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP, + GPIO201_MC4_CMD | PIN_INPUT_PULLUP, + GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL, + GPIO203_MC4_CLK | PIN_OUTPUT_LOW, + GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP, + GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP, + GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP, + GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP, + + /* UART2, console */ + GPIO29_U2_RXD | PIN_INPUT_PULLUP, + GPIO30_U2_TXD | PIN_OUTPUT_HIGH, + GPIO31_U2_CTSn | PIN_INPUT_PULLUP, + GPIO32_U2_RTSn | PIN_OUTPUT_HIGH, + + /* + * USB, pin 256-267 USB, Is probably already setup correctly from + * BootROM/boot stages, but we don't trust that and set it up anyway + */ + GPIO256_USB_NXT, + GPIO257_USB_STP, + GPIO258_USB_XCLK, + GPIO259_USB_DIR, + GPIO260_USB_DAT7, + GPIO261_USB_DAT6, + GPIO262_USB_DAT5, + GPIO263_USB_DAT4, + GPIO264_USB_DAT3, + GPIO265_USB_DAT2, + GPIO266_USB_DAT1, + GPIO267_USB_DAT0, +}; + +unsigned long gpio_cfg_snowball[] = { + /* MMC0 (MicroSD card) */ + GPIO217_GPIO | PIN_OUTPUT_HIGH, /* MMC_EN */ + GPIO218_GPIO | PIN_INPUT_NOPULL, /* MMC_CD */ + GPIO228_GPIO | PIN_OUTPUT_HIGH, /* SD_SEL */ + + /* eMMC */ + GPIO167_GPIO | PIN_OUTPUT_HIGH, /* RSTn_MLC */ + + /* LAN */ + GPIO131_SM_ADQ8, + GPIO132_SM_ADQ9, + GPIO133_SM_ADQ10, + GPIO134_SM_ADQ11, + GPIO135_SM_ADQ12, + GPIO136_SM_ADQ13, + GPIO137_SM_ADQ14, + GPIO138_SM_ADQ15, + + /* RSTn_LAN */ + GPIO141_GPIO | PIN_OUTPUT_HIGH, +}; + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_init(void) +{ + /* + * Setup board (bd) and board-info (bi). + * bi_arch_number: Unique id for this board. It will passed in r1 to + * Linux startup code and is the machine_id. + * bi_boot_params: Where this board expects params. + */ + gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL; + gd->bd->bi_boot_params = 0x00000100; + + /* Configure GPIO pins needed by U-boot */ + db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common)); + + db8500_gpio_config_pins(gpio_cfg_snowball, + ARRAY_SIZE(gpio_cfg_snowball)); + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->ram_size = gd->bd->bi_dram[0].size = + get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE); + + return 0; +} + +static int raise_ab8500_gpio16(void) +{ + int ret; + + /* selection */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_SEL2_REG); + if (ret < 0) + goto out; + + ret |= 0x80; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_SEL2_REG, ret); + if (ret < 0) + goto out; + + /* direction */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR2_REG); + if (ret < 0) + goto out; + + ret |= 0x80; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR2_REG, ret); + if (ret < 0) + goto out; + + /* out */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT2_REG); + if (ret < 0) + goto out; + + ret |= 0x80; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT2_REG, ret); + +out: + return ret; +} + +static int raise_ab8500_gpio26(void) +{ + int ret; + + /* selection */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_DIR4_REG); + if (ret < 0) + goto out; + + ret |= 0x2; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_DIR4_REG, ret); + if (ret < 0) + goto out; + + /* out */ + ret = ab8500_read(AB8500_MISC, AB8500_GPIO_OUT4_REG); + if (ret < 0) + goto out; + + ret |= 0x2; + ret = ab8500_write(AB8500_MISC, AB8500_GPIO_OUT4_REG, ret); + +out: + return ret; +} + +int board_late_init(void) +{ + /* enable 3V3 for LAN controller */ + if (raise_ab8500_gpio26() >= 0) { + /* Turn on FSMC device */ + writel(0x1, 0x8000f000); + writel(0x1, 0x8000f008); + + /* setup FSMC for LAN controler */ + writel(0x305b, 0x80000000); + + /* run at the highest possible speed */ + writel(0x01010210, 0x80000004); + } else + printf("error: can't raise GPIO26\n"); + + /* enable 3v6 for GBF chip */ + if ((raise_ab8500_gpio16() < 0)) + printf("error: cant' raise GPIO16\n"); + + return 0; +} + +#ifdef CONFIG_MMC +/* + * emmc_host_init - initialize the emmc controller. + * Configure GPIO settings, set initial clock and power for emmc slot. + * Initialize mmc struct and register with mmc framework. + */ +static int emmc_host_init(void) +{ + struct pl180_mmc_host *host; + + host = malloc(sizeof(struct pl180_mmc_host)); + if (!host) + return -ENOMEM; + memset(host, 0, sizeof(*host)); + + host->base = (struct sdi_registers *)CFG_EMMC_BASE; + host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON; + host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | + SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; + strcpy(host->name, "EMMC"); + host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz; + host->voltages = VOLTAGE_WINDOW_MMC; + host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); + host->clock_max = ARM_MCLK / 2; + host->clock_in = ARM_MCLK; + host->version2 = 1; + + return arm_pl180_mmci_init(host); +} + +/* + * mmc_host_init - initialize the external mmc controller. + * Configure GPIO settings, set initial clock and power for mmc slot. + * Initialize mmc struct and register with mmc framework. + */ +static int mmc_host_init(void) +{ + struct pl180_mmc_host *host; + u32 sdi_u32; + + host = malloc(sizeof(struct pl180_mmc_host)); + if (!host) + return -ENOMEM; + memset(host, 0, sizeof(*host)); + + host->base = (struct sdi_registers *)CFG_MMC_BASE; + sdi_u32 = 0xBF; + writel(sdi_u32, &host->base->power); + host->pwr_init = 0xBF; + host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | + SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; + strcpy(host->name, "MMC"); + host->caps = MMC_MODE_8BIT; + host->b_max = 0; + host->voltages = VOLTAGE_WINDOW_SD; + host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); + host->clock_max = ARM_MCLK / 2; + host->clock_in = ARM_MCLK; + host->version2 = 1; + + return arm_pl180_mmci_init(host); +} + +/* + * board_mmc_init - initialize all the mmc/sd host controllers. + * Called by generic mmc framework. + */ +int board_mmc_init(bd_t *bis) +{ + int error; + + (void) bis; + + error = emmc_host_init(); + if (error) { + printf("emmc_host_init() %d\n", error); + return -1; + } + + u8500_mmc_power_init(); + + error = mmc_host_init(); + if (error) { + printf("mmc_host_init() %d\n", error); + return -1; + } + + return 0; +} +#endif /* CONFIG_MMC */ diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile index 4091a428e7..4ea2212188 100644 --- a/board/st-ericsson/u8500/Makefile +++ b/board/st-ericsson/u8500/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk CFLAGS += -D__RELEASE -D__STN_8500 LIB = $(obj)lib$(BOARD).o -COBJS := u8500_href.o gpio.o prcmu.o +COBJS := u8500_href.o gpio.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c index 5f85fdcbfc..ec559e33e0 100644 --- a/board/st-ericsson/u8500/u8500_href.c +++ b/board/st-ericsson/u8500/u8500_href.c @@ -18,6 +18,7 @@ #include <config.h> #include <common.h> +#include <malloc.h> #include <i2c.h> #include <asm/types.h> #include <asm/io.h> @@ -26,8 +27,8 @@ #include <asm/arch/gpio.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/prcmu.h> #ifdef CONFIG_MMC -#include "prcmu-fw.h" #include "../../../drivers/mmc/arm_pl180_mmci.h" #endif @@ -42,7 +43,6 @@ * SGA: Smart Graphic accelerator * B2R2: Graphic blitter */ -#define PRCMU_BASE CFG_PRCMU_BASE /* 0x80157000 for U8500 */ #define PRCM_ARMCLKFIX_MGT_REG (PRCMU_BASE + 0x000) #define PRCM_ACLK_MGT_REG (PRCMU_BASE + 0x004) #define PRCM_SVAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x008) @@ -139,18 +139,6 @@ void show_boot_progress(int progress) } #endif -static unsigned int read_asicid(void) -{ - unsigned int *address = (void *)U8500_BOOTROM_BASE - + U8500_BOOTROM_ASIC_ID_OFFSET; - return readl(address); -} - -int cpu_is_u8500v11(void) -{ - return read_asicid() == 0x008500A1; -} - /* * Miscellaneous platform dependent initialisations */ @@ -227,67 +215,6 @@ unsigned int addr_vall_arr[] = { }; #ifdef CONFIG_BOARD_LATE_INIT -#ifdef CONFIG_MMC - -#define LDO_VAUX3_MASK 0x3 -#define LDO_VAUX3_ENABLE 0x1 -#define VAUX3_VOLTAGE_2_9V 0xd - -#define AB8500_REGU_CTRL2 0x4 -#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A -#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421 - -static int hrefplus_mmc_power_init(void) -{ - int ret; - int val; - - if (!cpu_is_u8500v11()) - return 0; - - /* - * On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD - * card to work. This is done by enabling the regulators in the AB8500 - * via PRCMU I2C transactions. - * - * This code is derived from the handling of AB8500_LDO_VAUX3 in - * ab8500_ldo_enable() and ab8500_ldo_disable() in Linux. - * - * Turn off and delay is required to have it work across soft reboots. - */ - - ret = prcmu_i2c_read(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG); - if (ret < 0) - goto out; - - val = ret; - - /* Turn off */ - ret = prcmu_i2c_write(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG, - val & ~LDO_VAUX3_MASK); - if (ret < 0) - goto out; - - udelay(10 * 1000); - - /* Set the voltage to 2.9V */ - ret = prcmu_i2c_write(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_SEL_REG, - VAUX3_VOLTAGE_2_9V); - if (ret < 0) - goto out; - - val = val & ~LDO_VAUX3_MASK; - val = val | LDO_VAUX3_ENABLE; - - /* Turn on the supply */ - ret = prcmu_i2c_write(AB8500_REGU_CTRL2, - AB8500_REGU_VRF1VAUX3_REGU_REG, val); - -out: - return ret; -} -#endif /* * called after all initialisation were done, but before the generic * mmc_initialize(). @@ -314,7 +241,7 @@ int board_late_init(void) setenv("board_id", "1"); } #ifdef CONFIG_MMC - hrefplus_mmc_power_init(); + u8500_mmc_power_init(); /* * config extended GPIO pins for level shifter and @@ -448,12 +375,27 @@ static int u8500_mmci_board_init(void) int board_mmc_init(bd_t *bd) { + struct pl180_mmc_host *host; + if (u8500_mmci_board_init()) return -ENODEV; - if (arm_pl180_mmci_init()) - return -ENODEV; - return 0; + host = malloc(sizeof(struct pl180_mmc_host)); + if (!host) + return -ENOMEM; + memset(host, 0, sizeof(*host)); + + strcpy(host->name, "MMC"); + host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; + host->pwr_init = INIT_PWR; + host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN; + host->voltages = VOLTAGE_WINDOW_MMC; + host->caps = 0; + host->clock_in = ARM_MCLK; + host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1)); + host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; + + return arm_pl180_mmci_init(host); } #endif diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c index c56b195ae1..fe5589d931 100644 --- a/board/syteco/zmx25/zmx25.c +++ b/board/syteco/zmx25/zmx25.c @@ -56,7 +56,7 @@ int board_init() /* Setup of core volatage selection pin to run at 1.4V */ writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 15), 1); + gpio_direction_output(IMX_GPIO_NR(3, 15), 1); /* Setup of input daisy chains for SD card pins*/ writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd); @@ -68,10 +68,10 @@ int board_init() /* Setup of digital output for USB power and OC */ writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 28), 1); + gpio_direction_output(IMX_GPIO_NR(1, 28), 1); writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */ - gpio_direction_input(MXC_GPIO_PORT_TO_NUM(1, 18)); + gpio_direction_input(IMX_GPIO_NR(1, 18)); /* Setup of digital output control pins */ writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */ @@ -83,21 +83,21 @@ int board_init() writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */ /* Switch both output drivers off */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 7), 0); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 6), 0); + gpio_direction_output(IMX_GPIO_NR(1, 7), 0); + gpio_direction_output(IMX_GPIO_NR(1, 6), 0); /* Setup of key input pin GPIO2[29]*/ writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0); writel(0, &padctl->pad_kpp_row0); /* Key pull up off */ - gpio_direction_input(MXC_GPIO_PORT_TO_NUM(2, 29)); + gpio_direction_input(IMX_GPIO_NR(2, 29)); /* Setup of status LED outputs */ writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */ writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */ /* Switch both LEDs off */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(4, 21), 0); - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + gpio_direction_output(IMX_GPIO_NR(4, 21), 0); + gpio_direction_output(IMX_GPIO_NR(1, 29), 0); /* Setup of CAN1 and CAN2 signals */ writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */ @@ -148,12 +148,12 @@ int board_late_init(void) writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); /* assert PHY reset (low) */ - gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 16), 0); + gpio_direction_output(IMX_GPIO_NR(3, 16), 0); udelay(5000); /* deassert PHY reset */ - gpio_set_value(MXC_GPIO_PORT_TO_NUM(3, 16), 1); + gpio_set_value(IMX_GPIO_NR(3, 16), 1); udelay(5000); #endif @@ -161,12 +161,12 @@ int board_late_init(void) e = getenv("gs_base_board"); if (e != NULL) { if (strcmp(e, "G283") == 0) { - int key = gpio_get_value(MXC_GPIO_PORT_TO_NUM(2, 29)); + int key = gpio_get_value(IMX_GPIO_NR(2, 29)); if (key) { /* Switch on both LEDs to inidcate boot mode */ - gpio_set_value(MXC_GPIO_PORT_TO_NUM(1, 29), 0); - gpio_set_value(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + gpio_set_value(IMX_GPIO_NR(1, 29), 0); + gpio_set_value(IMX_GPIO_NR(4, 21), 0); setenv("preboot", "run gs_slow_boot"); } else diff --git a/board/taskit/stamp9g20/Makefile b/board/taskit/stamp9g20/Makefile new file mode 100644 index 0000000000..4f17a27af3 --- /dev/null +++ b/board/taskit/stamp9g20/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian@popies.net> +# Lead Tech Design <www.leadtechdesign.com> +# +# (C) Copyright 2012 +# Markus Hubig <mhubig@imko.de> +# IMKO GmbH <www.imko.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += stamp9g20.o +COBJS-y += led.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/taskit/stamp9g20/led.c b/board/taskit/stamp9g20/led.c new file mode 100644 index 0000000000..197b4da5f0 --- /dev/null +++ b/board/taskit/stamp9g20/led.c @@ -0,0 +1,138 @@ +/* + * Copyright (c) 2009 Wind River Systems, Inc. + * Tom Rix <Tom.Rix@windriver.com> + * (C) Copyright 2009 + * Eric Benard <eric@eukrea.com> + * + * (C) Copyright 2012 + * Markus Hubig <mhubig@imko.de> + * IMKO GmbH <www.imko.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pmc.h> +#include <status_led.h> + +static unsigned int saved_state[3] = {STATUS_LED_OFF, + STATUS_LED_OFF, STATUS_LED_OFF}; + +void coloured_LED_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable the clock */ + writel(ATMEL_ID_PIOC, &pmc->pcer); + + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); + + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_gpio_value(CONFIG_YELLOW_LED, 0); +} + +void red_led_on(void) +{ + at91_set_gpio_value(CONFIG_RED_LED, 1); + saved_state[STATUS_LED_RED] = STATUS_LED_ON; +} + +void red_led_off(void) +{ + at91_set_gpio_value(CONFIG_RED_LED, 0); + saved_state[STATUS_LED_RED] = STATUS_LED_OFF; +} + +void green_led_on(void) +{ + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + saved_state[STATUS_LED_GREEN] = STATUS_LED_ON; +} + +void green_led_off(void) +{ + at91_set_gpio_value(CONFIG_GREEN_LED, 0); + saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF; +} + +void yellow_led_on(void) +{ + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); + saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON; +} + +void yellow_led_off(void) +{ + at91_set_gpio_value(CONFIG_YELLOW_LED, 0); + saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF; +} + +void __led_init(led_id_t mask, int state) +{ + __led_set(mask, state); +} + +void __led_toggle(led_id_t mask) +{ + if (STATUS_LED_RED == mask) { + if (STATUS_LED_ON == saved_state[STATUS_LED_RED]) + red_led_off(); + else + red_led_on(); + + } else if (STATUS_LED_GREEN == mask) { + if (STATUS_LED_ON == saved_state[STATUS_LED_GREEN]) + green_led_off(); + else + green_led_on(); + + } else if (STATUS_LED_YELLOW == mask) { + if (STATUS_LED_ON == saved_state[STATUS_LED_YELLOW]) + yellow_led_off(); + else + yellow_led_on(); + } +} + +void __led_set(led_id_t mask, int state) +{ + if (STATUS_LED_RED == mask) { + if (STATUS_LED_ON == state) + red_led_on(); + else + red_led_off(); + + } else if (STATUS_LED_GREEN == mask) { + if (STATUS_LED_ON == state) + green_led_on(); + else + green_led_off(); + + } else if (STATUS_LED_YELLOW == mask) { + if (STATUS_LED_ON == state) + yellow_led_on(); + else + yellow_led_off(); + } +} diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c new file mode 100644 index 0000000000..5e07bf8d4e --- /dev/null +++ b/board/taskit/stamp9g20/stamp9g20.c @@ -0,0 +1,191 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * Achim Ehrlich <aehrlich@taskit.de> + * taskit GmbH <www.taskit.de> + * + * (C) Copyright 2012- + * Markus Hubig <mhubig@imko.de> + * IMKO GmbH <www.imko.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <watchdog.h> + +#ifdef CONFIG_MACB +# include <net.h> +# include <netdev.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static void stamp9G20_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + unsigned long csa; + + /* Assign CS3 to NAND/SmartMedia Interface */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; + writel(csa, &matrix->ebicsa); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | + AT91_SMC_MODE_DBW_8 | + AT91_SMC_MODE_TDF_CYCLE(2), + &smc->cs[3].mode); + + /* Configure RDY/BSY */ + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); +} + +#ifdef CONFIG_MACB +static void stamp9G20_macb_hw_init(void) +{ + struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; + struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC; + unsigned long erstl; + + /* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */ + at91_set_gpio_output(AT91_PIN_PA26, 0); + + /* + * Disable pull-up on: + * RXDV (PA17) => PHY normal mode (not Test mode) + * ERX0 (PA14) => PHY ADDR0 + * ERX1 (PA15) => PHY ADDR1 + * ERX2 (PA25) => PHY ADDR2 + * ERX3 (PA26) => PHY ADDR3 + * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA18) | + pin_to_mask(AT91_PIN_PA28), + &pioa->pudr); + + erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK; + + /* Need to reset PHY -> 500ms reset */ + writel(AT91_RSTC_KEY | (AT91_RSTC_MR_ERSTL(13) & + ~AT91_RSTC_MR_URSTEN), &rstc->mr); + writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr); + + /* Wait for end of hardware reset */ + unsigned long start = get_timer(0); + unsigned long timeout = 1000; /* 1000ms */ + + while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) { + + /* avoid shutdown by watchdog */ + WATCHDOG_RESET(); + mdelay(10); + + /* timeout for not getting stuck in an endless loop */ + if (get_timer(start) >= timeout) { + puts("*** ERROR: Timeout waiting for PHY reset!\n"); + break; + }; + }; + + /* Restore NRST value */ + writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, + &rstc->mr); + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA18) | + pin_to_mask(AT91_PIN_PA28), + &pioa->puer); + + /* Initialize EMAC=MACB hardware */ + at91_macb_hw_init(); +} +#endif /* CONFIG_MACB */ + +int board_early_init_f(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable clocks for all PIOs */ + writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | + (1 << ATMEL_ID_PIOC), &pmc->pcer); + + return 0; +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + /* Enable the serial interface */ + at91_set_gpio_output(AT91_PIN_PC9, 1); + at91_seriald_hw_init(); + + stamp9G20_nand_hw_init(); +#ifdef CONFIG_MACB + stamp9G20_macb_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size( + (void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +#ifdef CONFIG_MACB +int board_eth_init(bd_t *bis) +{ + return macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00); +} +#endif /* CONFIG_MACB */ diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile index d58b1859f4..ca50eef613 100644 --- a/board/ti/am335x/Makefile +++ b/board/ti/am335x/Makefile @@ -18,7 +18,9 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := evm.o mux.o +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/ti/am335x/evm.c b/board/ti/am335x/evm.c deleted file mode 100644 index 5e2d53ab42..0000000000 --- a/board/ti/am335x/evm.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * evm.c - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <common.h> -#include <asm/arch/cpu.h> -#include <asm/arch/hardware.h> -#include <asm/arch/common_def.h> -#include <serial.h> -#include <i2c.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define UART_RESET (0x1 << 1) -#define UART_CLK_RUNNING_MASK 0x1 -#define UART_SMART_IDLE_EN (0x1 << 0x3) - -/* - * Basic board specific setup - */ -int board_init(void) -{ - enable_uart0_pin_mux(); - -#ifdef CONFIG_I2C - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif - - gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; - - return 0; -} diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 9ccb43642b..80becd5c7a 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -13,10 +13,11 @@ * GNU General Public License for more details. */ -#include <config.h> -#include <asm/arch/common_def.h> +#include <common.h> +#include <asm/arch/sys_proto.h> #include <asm/arch/hardware.h> #include <asm/io.h> +#include <i2c.h> #define MUX_CFG(value, offset) \ __raw_writel(value, (CTRL_BASE + offset)); @@ -258,7 +259,6 @@ static struct module_pin_mux uart0_pin_mux[] = { {-1}, }; -#ifdef CONFIG_MMC static struct module_pin_mux mmc0_pin_mux[] = { {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ @@ -270,7 +270,29 @@ static struct module_pin_mux mmc0_pin_mux[] = { {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ {-1}, }; -#endif + +static struct module_pin_mux mmc0_pin_mux_sk_evm[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ + {-1}, +}; + +static struct module_pin_mux mmc1_pin_mux[] = { + {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ + {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */ + {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */ + {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */ + {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */ + {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */ + {OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */ + {OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_CD */ + {-1}, +}; static struct module_pin_mux i2c0_pin_mux[] = { {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | @@ -280,6 +302,66 @@ static struct module_pin_mux i2c0_pin_mux[] = { {-1}, }; +static struct module_pin_mux i2c1_pin_mux[] = { + {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ + {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ + {-1}, +}; + +static struct module_pin_mux spi0_pin_mux[] = { + {OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_SCLK */ + {OFFSET(spi0_d0), (MODE(0) | RXACTIVE | + PULLUDEN | PULLUP_EN)}, /* SPI0_D0 */ + {OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_D1 */ + {OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | + PULLUDEN | PULLUP_EN)}, /* SPI0_CS0 */ + {-1}, +}; + +static struct module_pin_mux gpio0_7_pin_mux[] = { + {OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN)}, /* GPIO0_7 */ + {-1}, +}; + +static struct module_pin_mux rgmii1_pin_mux[] = { + {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ + {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ + {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ + {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ + {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ + {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ + {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ + {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ + {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ + {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ + {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ + {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +static struct module_pin_mux mii1_pin_mux[] = { + {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */ + {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */ + {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */ + {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */ + {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */ + {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */ + {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */ + {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */ + {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */ + {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */ + {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */ + {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */ + {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + /* * Configure the pin mux for the module */ @@ -299,14 +381,75 @@ void enable_uart0_pin_mux(void) configure_module_pin_mux(uart0_pin_mux); } -#ifdef CONFIG_MMC -void enable_mmc0_pin_mux(void) -{ - configure_module_pin_mux(mmc0_pin_mux); -} -#endif void enable_i2c0_pin_mux(void) { configure_module_pin_mux(i2c0_pin_mux); } + +/* + * The AM335x GP EVM, if daughter card(s) are connected, can have 8 + * different profiles. These profiles determine what peripherals are + * valid and need pinmux to be configured. + */ +#define PROFILE_NONE 0x0 +#define PROFILE_0 (1 << 0) +#define PROFILE_1 (1 << 1) +#define PROFILE_2 (1 << 2) +#define PROFILE_3 (1 << 3) +#define PROFILE_4 (1 << 4) +#define PROFILE_5 (1 << 5) +#define PROFILE_6 (1 << 6) +#define PROFILE_7 (1 << 7) +#define PROFILE_MASK 0x7 +#define PROFILE_ALL 0xFF + +/* CPLD registers */ +#define I2C_CPLD_ADDR 0x35 +#define CFG_REG 0x10 + +static unsigned short detect_daughter_board_profile(void) +{ + unsigned short val; + + if (i2c_probe(I2C_CPLD_ADDR)) + return PROFILE_NONE; + + if (i2c_read(I2C_CPLD_ADDR, CFG_REG, 1, (unsigned char *)(&val), 2)) + return PROFILE_NONE; + + return (1 << (val & PROFILE_MASK)); +} + +void enable_board_pin_mux(struct am335x_baseboard_id *header) +{ + /* Do board-specific muxes. */ + if (!strncmp(header->name, "A335BONE", HDR_NAME_LEN)) { + /* Beaglebone pinmux */ + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(mmc1_pin_mux); + } else if (!strncmp(header->config, "SKU#01", 6)) { + /* General Purpose EVM */ + unsigned short profile = detect_daughter_board_profile(); + configure_module_pin_mux(rgmii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + /* In profile #2 i2c1 and spi0 conflict. */ + if (profile & ~PROFILE_2) + configure_module_pin_mux(i2c1_pin_mux); + else if (profile == PROFILE_2) { + configure_module_pin_mux(mmc1_pin_mux); + configure_module_pin_mux(spi0_pin_mux); + } + } else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) { + /* Starter Kit EVM */ + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(gpio0_7_pin_mux); + configure_module_pin_mux(rgmii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux_sk_evm); + } else { + puts("Unknown board, cannot configure pinmux."); + hang(); + } +} diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 2ef22900d7..99f833f041 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -50,8 +50,6 @@ #include <asm/ehci-omap.h> #endif -#define pr_debug(fmt, args...) debug(fmt, ##args) - #define TWL4030_I2C_BUS 0 #define EXPANSION_EEPROM_I2C_BUS 1 #define EXPANSION_EEPROM_I2C_ADDRESS 0x50 @@ -112,7 +110,7 @@ int board_init(void) * GPIO173, GPIO172, GPIO171: 1 0 1 => C4 * GPIO173, GPIO172, GPIO171: 0 0 0 => xM */ -int get_board_revision(void) +static int get_board_revision(void) { int revision; @@ -211,7 +209,7 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, * bus 1 for the availability of an AT24C01B serial EEPROM. * returns the device_vendor field from the EEPROM */ -unsigned int get_expansion_id(void) +static unsigned int get_expansion_id(void) { i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS); @@ -230,11 +228,12 @@ unsigned int get_expansion_id(void) return expansion_config.device_vendor; } +#ifdef CONFIG_VIDEO_OMAP3 /* * Configure DSS to display background color on DVID * Configure VENC to display color bar on S-Video */ -void beagle_display_init(void) +static void beagle_display_init(void) { omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH); switch (get_board_revision()) { @@ -284,6 +283,7 @@ static void beagle_dvi_pup(void) break; } } +#endif /* * Routine: misc_init_r @@ -460,9 +460,11 @@ int misc_init_r(void) dieid_num_r(); +#ifdef CONFIG_VIDEO_OMAP3 beagle_dvi_pup(); beagle_display_init(); omap3_dss_enable(); +#endif return 0; } diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index d68bef78f8..f28eab070b 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -521,7 +521,7 @@ static void setup_fec(void) } struct fsl_esdhc_cfg esdhc_cfg[1] = { - {MMC_SDHC1_BASE_ADDR, 1}, + {MMC_SDHC1_BASE_ADDR}, }; int get_mmc_getcd(u8 *cd, struct mmc *mmc) @@ -674,11 +674,18 @@ int board_late_init(void) udelay(2000); #endif - setenv("stdout", "serial"); - return 0; } +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + int checkboard(void) { puts("Board: TTControl Vision II CPU V\n"); diff --git a/boards.cfg b/boards.cfg index 9cb41f0a24..72e7803442 100644 --- a/boards.cfg +++ b/boards.cfg @@ -53,6 +53,7 @@ mx35pdk arm arm1136 - freesca apollon arm arm1136 apollon - omap24xx omap2420h4 arm arm1136 - ti omap24xx tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x +rpi_b arm arm1176 rpi_b raspberrypi bcm2835 integratorap_cm720t arm arm720t integrator armltd - integratorap:CM720T integratorap_cm920t arm arm920t integrator armltd - integratorap:CM920T integratorcp_cm920t arm arm920t integrator armltd - integratorcp:CM920T @@ -94,6 +95,8 @@ at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH +at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH +at91sam9x5ek_spiflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_SPIFLASH at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0 at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1 at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH @@ -125,10 +128,13 @@ cpu9G20_nand_128M arm arm926ejs cpu9260 eukrea pm9261 arm arm926ejs pm9261 ronetix at91 pm9261:AT91SAM9261 pm9263 arm arm926ejs pm9263 ronetix at91 pm9263:AT91SAM9263 pm9g45 arm arm926ejs pm9g45 ronetix at91 pm9g45:AT91SAM9G45 +portuxg20 arm arm926ejs stamp9g20 taskit at91 stamp9g20:AT91SAM9G20,PORTUXG20 +stamp9g20 arm arm926ejs stamp9g20 taskit at91 stamp9g20:AT91SAM9G20 cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx da830evm arm arm926ejs da8xxevm davinci davinci da850_am18xxevm arm arm926ejs da8xxevm davinci davinci da850evm:DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50 da850evm arm arm926ejs da8xxevm davinci davinci da850evm:MAC_ADDR_IN_SPIFLASH +da850evm_direct_nor arm arm926ejs da8xxevm davinci davinci da850evm:MAC_ADDR_IN_SPIFLASH,USE_NOR,DIRECT_NOR_BOOT davinci_dm355evm arm arm926ejs dm355evm davinci davinci davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci davinci_dm365evm arm arm926ejs dm365evm davinci davinci @@ -175,8 +181,10 @@ tx25 arm arm926ejs tx25 karo zmx25 arm arm926ejs zmx25 syteco mx25 imx27lite arm arm926ejs imx27lite logicpd mx27 magnesium arm arm926ejs imx27lite logicpd mx27 -m28evk arm arm926ejs - denx mx28 -mx28evk arm arm926ejs - freescale mx28 +apx4devkit arm arm926ejs apx4devkit bluegiga mxs apx4devkit +m28evk arm arm926ejs m28evk denx mxs m28evk +mx28evk arm arm926ejs mx28evk freescale mxs mx28evk +sc_sps_1 arm arm926ejs sc_sps_1 schulercontrol mxs nhk8815 arm arm926ejs nhk8815 st nomadik nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND omap5912osk arm arm926ejs - ti omap @@ -213,8 +221,8 @@ integratorcp_cm946es arm arm946es integrator armltd ca9x4_ct_vxp arm armv7 vexpress armltd am335x_evm arm armv7 am335x ti am33xx highbank arm armv7 highbank - highbank -efikamx arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg -efikasb arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg +mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg +mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg mx53ard arm armv7 mx53ard freescale mx5 mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg @@ -228,8 +236,10 @@ cm_t35 arm armv7 cm_t35 - omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 dig297 arm armv7 dig297 comelit omap3 -igep0020 arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020 -igep0030 arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030 +igep0020 arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND +igep0020_nand arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND +igep0030 arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND +igep0030_nand arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 @@ -256,11 +266,12 @@ s5pc210_universal arm armv7 universal_c210 samsung smdk5250 arm armv7 smdk5250 samsung exynos smdkv310 arm armv7 smdkv310 samsung exynos trats arm armv7 trats samsung exynos -harmony arm armv7 harmony nvidia tegra2 -seaboard arm armv7 seaboard nvidia tegra2 -ventana arm armv7 ventana nvidia tegra2 -whistler arm armv7 whistler nvidia tegra2 +harmony arm armv7:arm720t harmony nvidia tegra20 +seaboard arm armv7:arm720t seaboard nvidia tegra20 +ventana arm armv7:arm720t ventana nvidia tegra20 +whistler arm armv7:arm720t whistler nvidia tegra20 u8500_href arm armv7 u8500 st-ericsson u8500 +snowball arm armv7 snowball st-ericsson u8500 actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8 @@ -285,11 +296,11 @@ xaeniax arm pxa zipitz2 arm pxa colibri_pxa270 arm pxa - toradex jornada arm sa1100 -plutux arm armv7 plutux avionic-design tegra2 -medcom arm armv7 medcom avionic-design tegra2 -tec arm armv7 tec avionic-design tegra2 -paz00 arm armv7 paz00 compal tegra2 -trimslice arm armv7 trimslice compulab tegra2 +plutux arm armv7:arm720t plutux avionic-design tegra20 +medcom arm armv7:arm720t medcom avionic-design tegra20 +tec arm armv7:arm720t tec avionic-design tegra20 +paz00 arm armv7:arm720t paz00 compal tegra20 +trimslice arm armv7:arm720t trimslice compulab tegra20 atngw100 avr32 at32ap - atmel at32ap700x atstk1002 avr32 at32ap atstk1000 atmel at32ap700x atstk1003 avr32 at32ap atstk1000 atmel at32ap700x @@ -133,7 +133,11 @@ cc-version = $(shell $(SHELL) $(SRCTREE)/tools/gcc-version.sh $(CC)) # Include the make variables (CC, etc...) # AS = $(CROSS_COMPILE)as -LD = $(CROSS_COMPILE)ld + +# Always use GNU ld +LD = $(shell if $(CROSS_COMPILE)ld.bfd -v > /dev/null 2>&1; \ + then echo "$(CROSS_COMPILE)ld.bfd"; else echo "$(CROSS_COMPILE)ld"; fi;) + CC = $(CROSS_COMPILE)gcc CPP = $(CC) -E AR = $(CROSS_COMPILE)ar diff --git a/doc/README.atmel_pmecc b/doc/README.atmel_pmecc new file mode 100644 index 0000000000..b483744ea5 --- /dev/null +++ b/doc/README.atmel_pmecc @@ -0,0 +1,44 @@ +How to enable PMECC(Programmable Multibit ECC) for nand on Atmel SoCs +----------------------------------------------------------- +2012-08-22 Josh Wu <josh.wu@atmel.com> + +The Programmable Multibit ECC (PMECC) controller is a programmable binary +BCH(Bose, Chaudhuri and Hocquenghem) encoder and decoder. This controller +can be used to support both SLC and MLC NAND Flash devices. It supports to +generate ECC to correct 2, 4, 8, 12 or 24 bits of error per sector (512 or +1024 bytes) of data. + +Following Atmel AT91 products support PMECC. +- AT91SAM9X25, X35, G25, G15, G35 (tested) +- AT91SAM9N12 (not tested, Should work) + +As soon as your nand flash software ECC works, you can enable PMECC. + +To use PMECC in this driver, the user needs to set: + 1. the PMECC correction error bits capability: CONFIG_PMECC_CAP. + It can be 2, 4, 8, 12 or 24. + 2. The PMECC sector size: CONFIG_PMECC_SECTOR_SIZE. + It only can be 512 or 1024. + 3. The PMECC index lookup table's offsets in ROM code: CONFIG_PMECC_INDEX_TABLE_OFFSET. + In the chip datasheet section "Boot Stragegies", you can find + two Galois Field Table in the ROM code. One table is for 512-bytes + sector. Another is for 1024-byte sector. Each Galois Field includes + two sub-table: indext table & alpha table. + In the beginning of each Galois Field Table is the index table, + Alpha table is in the following. + So the index table's offset is same as the Galois Field Table. + + Please set CONFIG_PMECC_INDEX_TABLE_OFFSET correctly according the + Galois Field Table's offset base on the sector size you used. + +Take AT91SAM9X5EK as an example, the board definition file likes: + +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC 1 +#define CONFIG_ATMEL_NAND_HW_PMECC 1 +#define CONFIG_PMECC_CAP 2 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 + +NOTE: If you use 1024 as the sector size, then need set 0x10000 as the + CONFIG_PMECC_INDEX_TABLE_OFFSET diff --git a/doc/README.m28 b/doc/README.m28 index 7dee8cee90..2a92226feb 100644 --- a/doc/README.m28 +++ b/doc/README.m28 @@ -4,8 +4,8 @@ DENX M28EVK Files of the M28/M28EVK port ---------------------------- -arch/arm/cpu/arm926ejs/mx28/ - The CPU support code for the Freescale i.MX28 -arch/arm/include/asm/arch-mx28/ - Header files for the Freescale i.MX28 +arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28 +arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28 board/denx/m28evk/ - M28EVK board specific files include/configs/m28evk.h - M28EVK configuration file diff --git a/doc/README.mx28evk b/doc/README.mx28evk index 571dfdab8d..2fc50696f5 100644 --- a/doc/README.mx28evk +++ b/doc/README.mx28evk @@ -6,8 +6,8 @@ Supported hardware: only MX28EVK rev D is supported in U-boot. Files of the MX28EVK port -------------------------- -arch/arm/cpu/arm926ejs/mx28/ - The CPU support code for the Freescale i.MX28 -arch/arm/include/asm/arch-mx28/ - Header files for the Freescale i.MX28 +arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28 +arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28 board/freescale/mx28evk/ - MX28EVK board specific files include/configs/mx28evk.h - MX28EVK configuration file diff --git a/doc/git-mailrc b/doc/git-mailrc index c8a6390e1d..d7fc3c8cfe 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -11,6 +11,7 @@ alias u-boot uboot # Maintainer aliases. Use the same alias here as patchwork to keep # things simple and easy to look up/coordinate. alias aaribaud Albert Aribaud <albert.u.boot@aribaud.net> +alias abiessmann Andreas Bießmann <andreas.devel@googlemail.com> alias afleming Andy Fleming <afleming@freescale.com> alias ag Anatolij Gustschin <agust@denx.de> alias galak Kumar Gala <galak@kernel.crashing.org> @@ -39,7 +40,7 @@ alias arch arm, avr32, bfin, m68k, microblaze, mips, nds32, nios2, pow alias arches arch alias arm uboot, aaribaud -alias at91 uboot, reinhardm +alias at91 uboot, abiessmann alias davinci ti alias imx uboot, sbabic alias kirkwood uboot, prafulla @@ -50,9 +51,9 @@ alias s5pc samsung alias samsung uboot, prom alias tegra uboot, Simon Glass <sjg@chromium.org>, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com> alias tegra2 tegra -alias ti uboot, Sandeep Paulraj <s-paulraj@ti.com>, Tom Rini <trini@ti.com> +alias ti uboot, Tom Rini <trini@ti.com> -alias avr32 uboot, Andreas Bießmann <andreas.devel@googlemail.com> +alias avr32 uboot, abiessmann alias bfin uboot, vapier alias blackfin bfin diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index cb2193ec55..37a941cc5b 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -76,8 +76,8 @@ static unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc) */ static int mxs_dma_read_semaphore(int channel) { - struct mx28_apbh_regs *apbh_regs = - (struct mx28_apbh_regs *)MXS_APBH_BASE; + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; uint32_t tmp; int ret; @@ -119,8 +119,8 @@ inline void mxs_dma_flush_desc(struct mxs_dma_desc *desc) {} */ static int mxs_dma_enable(int channel) { - struct mx28_apbh_regs *apbh_regs = - (struct mx28_apbh_regs *)MXS_APBH_BASE; + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; unsigned int sem; struct mxs_dma_chan *pchan; struct mxs_dma_desc *pdesc; @@ -191,8 +191,8 @@ static int mxs_dma_enable(int channel) static int mxs_dma_disable(int channel) { struct mxs_dma_chan *pchan; - struct mx28_apbh_regs *apbh_regs = - (struct mx28_apbh_regs *)MXS_APBH_BASE; + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; int ret; ret = mxs_dma_validate_chan(channel); @@ -220,8 +220,8 @@ static int mxs_dma_disable(int channel) */ static int mxs_dma_reset(int channel) { - struct mx28_apbh_regs *apbh_regs = - (struct mx28_apbh_regs *)MXS_APBH_BASE; + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; int ret; ret = mxs_dma_validate_chan(channel); @@ -241,8 +241,8 @@ static int mxs_dma_reset(int channel) */ static int mxs_dma_enable_irq(int channel, int enable) { - struct mx28_apbh_regs *apbh_regs = - (struct mx28_apbh_regs *)MXS_APBH_BASE; + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; int ret; ret = mxs_dma_validate_chan(channel); @@ -267,8 +267,8 @@ static int mxs_dma_enable_irq(int channel, int enable) */ static int mxs_dma_ack_irq(int channel) { - struct mx28_apbh_regs *apbh_regs = - (struct mx28_apbh_regs *)MXS_APBH_BASE; + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; int ret; ret = mxs_dma_validate_chan(channel); @@ -504,15 +504,15 @@ static int mxs_dma_finish(int channel, struct list_head *head) */ static int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan) { - struct mx28_apbh_regs *apbh_regs = - (struct mx28_apbh_regs *)MXS_APBH_BASE; + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; int ret; ret = mxs_dma_validate_chan(chan); if (ret) return ret; - if (mx28_wait_mask_set(&apbh_regs->hw_apbh_ctrl1_reg, + if (mxs_wait_mask_set(&apbh_regs->hw_apbh_ctrl1_reg, 1 << chan, timeout)) { ret = -ETIMEDOUT; mxs_dma_reset(chan); @@ -526,7 +526,7 @@ static int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan) */ int mxs_dma_go(int chan) { - uint32_t timeout = 10000; + uint32_t timeout = 10000000; int ret; LIST_HEAD(tmp_desc_list); @@ -554,10 +554,10 @@ int mxs_dma_go(int chan) */ void mxs_dma_init(void) { - struct mx28_apbh_regs *apbh_regs = - (struct mx28_apbh_regs *)MXS_APBH_BASE; + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; - mx28_reset_block(&apbh_regs->hw_apbh_ctrl0_reg); + mxs_reset_block(&apbh_regs->hw_apbh_ctrl0_reg); #ifdef CONFIG_APBH_DMA_BURST8 writel(APBH_CTRL0_AHB_BURST8_EN, diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 106549dc2c..17f4b739a9 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -41,6 +41,9 @@ COBJS-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o COBJS-$(CONFIG_ALTERA_PIO) += altera_pio.o COBJS-$(CONFIG_MPC83XX_GPIO) += mpc83xx_gpio.o COBJS-$(CONFIG_SH_GPIO_PFC) += sh_pfc.o +COBJS-$(CONFIG_OMAP_GPIO) += omap_gpio.o +COBJS-$(CONFIG_DB8500_GPIO) += db8500_gpio.o +COBJS-$(CONFIG_BCM2835_GPIO) += bcm2835_gpio.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/gpio/bcm2835_gpio.c b/drivers/gpio/bcm2835_gpio.c new file mode 100644 index 0000000000..1d50dbd5e0 --- /dev/null +++ b/drivers/gpio/bcm2835_gpio.c @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2012 Vikram Narayananan + * <vikram186@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> + +inline int gpio_is_valid(unsigned gpio) +{ + return (gpio < BCM2835_GPIO_COUNT); +} + +int gpio_request(unsigned gpio, const char *label) +{ + return !gpio_is_valid(gpio); +} + +int gpio_free(unsigned gpio) +{ + return 0; +} + +int gpio_direction_input(unsigned gpio) +{ + struct bcm2835_gpio_regs *reg = + (struct bcm2835_gpio_regs *)BCM2835_GPIO_BASE; + unsigned val; + + val = readl(®->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); + val &= ~(BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(gpio)); + val |= (BCM2835_GPIO_INPUT << BCM2835_GPIO_FSEL_SHIFT(gpio)); + writel(val, ®->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); + + return 0; +} + +int gpio_direction_output(unsigned gpio, int value) +{ + struct bcm2835_gpio_regs *reg = + (struct bcm2835_gpio_regs *)BCM2835_GPIO_BASE; + unsigned val; + + gpio_set_value(gpio, value); + + val = readl(®->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); + val &= ~(BCM2835_GPIO_FSEL_MASK << BCM2835_GPIO_FSEL_SHIFT(gpio)); + val |= (BCM2835_GPIO_OUTPUT << BCM2835_GPIO_FSEL_SHIFT(gpio)); + writel(val, ®->gpfsel[BCM2835_GPIO_FSEL_BANK(gpio)]); + + return 0; +} + +int gpio_get_value(unsigned gpio) +{ + struct bcm2835_gpio_regs *reg = + (struct bcm2835_gpio_regs *)BCM2835_GPIO_BASE; + unsigned val; + + val = readl(®->gplev[BCM2835_GPIO_COMMON_BANK(gpio)]); + + return (val >> BCM2835_GPIO_COMMON_SHIFT(gpio)) & 0x1; +} + +int gpio_set_value(unsigned gpio, int value) +{ + struct bcm2835_gpio_regs *reg = + (struct bcm2835_gpio_regs *)BCM2835_GPIO_BASE; + u32 *output_reg = value ? reg->gpset : reg->gpclr; + + writel(1 << BCM2835_GPIO_COMMON_SHIFT(gpio), + &output_reg[BCM2835_GPIO_COMMON_BANK(gpio)]); + + return 0; +} diff --git a/drivers/gpio/db8500_gpio.c b/drivers/gpio/db8500_gpio.c new file mode 100644 index 0000000000..d5cb383e85 --- /dev/null +++ b/drivers/gpio/db8500_gpio.c @@ -0,0 +1,221 @@ +/* + * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code. + * The purpose is that GPIO config found in kernel should work by simply + * copy-paste it to U-boot. + * + * Original Linux authors: + * Copyright (C) 2008,2009 STMicroelectronics + * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> + * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> + * + * Ported to U-boot by: + * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/io.h> + +#include <asm/arch/db8500_gpio.h> +#include <asm/arch/db8500_pincfg.h> +#include <linux/compiler.h> + +#define IO_ADDR(x) (void *) (x) + +/* + * The GPIO module in the db8500 Systems-on-Chip is an + * AMBA device, managing 32 pins and alternate functions. The logic block + * is currently only used in the db8500. + */ + +#define GPIO_TOTAL_PINS 268 +#define GPIO_PINS_PER_BLOCK 32 +#define GPIO_BLOCKS_COUNT (GPIO_TOTAL_PINS/GPIO_PINS_PER_BLOCK + 1) +#define GPIO_BLOCK(pin) (((pin + GPIO_PINS_PER_BLOCK) >> 5) - 1) +#define GPIO_PIN_WITHIN_BLOCK(pin) ((pin)%(GPIO_PINS_PER_BLOCK)) + +/* Register in the logic block */ +#define DB8500_GPIO_DAT 0x00 +#define DB8500_GPIO_DATS 0x04 +#define DB8500_GPIO_DATC 0x08 +#define DB8500_GPIO_PDIS 0x0c +#define DB8500_GPIO_DIR 0x10 +#define DB8500_GPIO_DIRS 0x14 +#define DB8500_GPIO_DIRC 0x18 +#define DB8500_GPIO_SLPC 0x1c +#define DB8500_GPIO_AFSLA 0x20 +#define DB8500_GPIO_AFSLB 0x24 + +#define DB8500_GPIO_RIMSC 0x40 +#define DB8500_GPIO_FIMSC 0x44 +#define DB8500_GPIO_IS 0x48 +#define DB8500_GPIO_IC 0x4c +#define DB8500_GPIO_RWIMSC 0x50 +#define DB8500_GPIO_FWIMSC 0x54 +#define DB8500_GPIO_WKS 0x58 + +static void __iomem *get_gpio_addr(unsigned gpio) +{ + /* Our list of GPIO chips */ + static void __iomem *gpio_addrs[GPIO_BLOCKS_COUNT] = { + IO_ADDR(CFG_GPIO_0_BASE), + IO_ADDR(CFG_GPIO_1_BASE), + IO_ADDR(CFG_GPIO_2_BASE), + IO_ADDR(CFG_GPIO_3_BASE), + IO_ADDR(CFG_GPIO_4_BASE), + IO_ADDR(CFG_GPIO_5_BASE), + IO_ADDR(CFG_GPIO_6_BASE), + IO_ADDR(CFG_GPIO_7_BASE), + IO_ADDR(CFG_GPIO_8_BASE) + }; + + return gpio_addrs[GPIO_BLOCK(gpio)]; +} + +static unsigned get_gpio_offset(unsigned gpio) +{ + return GPIO_PIN_WITHIN_BLOCK(gpio); +} + +/* Can only be called from config_pin. Don't configure alt-mode directly */ +static void gpio_set_mode(unsigned gpio, enum db8500_gpio_alt mode) +{ + void __iomem *addr = get_gpio_addr(gpio); + unsigned offset = get_gpio_offset(gpio); + u32 bit = 1 << offset; + u32 afunc, bfunc; + + afunc = readl(addr + DB8500_GPIO_AFSLA) & ~bit; + bfunc = readl(addr + DB8500_GPIO_AFSLB) & ~bit; + if (mode & DB8500_GPIO_ALT_A) + afunc |= bit; + if (mode & DB8500_GPIO_ALT_B) + bfunc |= bit; + writel(afunc, addr + DB8500_GPIO_AFSLA); + writel(bfunc, addr + DB8500_GPIO_AFSLB); +} + +/** + * db8500_gpio_set_pull() - enable/disable pull up/down on a gpio + * @gpio: pin number + * @pull: one of DB8500_GPIO_PULL_DOWN, DB8500_GPIO_PULL_UP, + * and DB8500_GPIO_PULL_NONE + * + * Enables/disables pull up/down on a specified pin. This only takes effect if + * the pin is configured as an input (either explicitly or by the alternate + * function). + * + * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is + * configured as an input. Otherwise, due to the way the controller registers + * work, this function will change the value output on the pin. + */ +void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull) +{ + void __iomem *addr = get_gpio_addr(gpio); + unsigned offset = get_gpio_offset(gpio); + u32 bit = 1 << offset; + u32 pdis; + + pdis = readl(addr + DB8500_GPIO_PDIS); + if (pull == DB8500_GPIO_PULL_NONE) + pdis |= bit; + else + pdis &= ~bit; + writel(pdis, addr + DB8500_GPIO_PDIS); + + if (pull == DB8500_GPIO_PULL_UP) + writel(bit, addr + DB8500_GPIO_DATS); + else if (pull == DB8500_GPIO_PULL_DOWN) + writel(bit, addr + DB8500_GPIO_DATC); +} + +void db8500_gpio_make_input(unsigned gpio) +{ + void __iomem *addr = get_gpio_addr(gpio); + unsigned offset = get_gpio_offset(gpio); + + writel(1 << offset, addr + DB8500_GPIO_DIRC); +} + +int db8500_gpio_get_input(unsigned gpio) +{ + void __iomem *addr = get_gpio_addr(gpio); + unsigned offset = get_gpio_offset(gpio); + u32 bit = 1 << offset; + + printf("db8500_gpio_get_input gpio=%u addr=%p offset=%u bit=%#x\n", + gpio, addr, offset, bit); + + return (readl(addr + DB8500_GPIO_DAT) & bit) != 0; +} + +void db8500_gpio_make_output(unsigned gpio, int val) +{ + void __iomem *addr = get_gpio_addr(gpio); + unsigned offset = get_gpio_offset(gpio); + + writel(1 << offset, addr + DB8500_GPIO_DIRS); + db8500_gpio_set_output(gpio, val); +} + +void db8500_gpio_set_output(unsigned gpio, int val) +{ + void __iomem *addr = get_gpio_addr(gpio); + unsigned offset = get_gpio_offset(gpio); + + if (val) + writel(1 << offset, addr + DB8500_GPIO_DATS); + else + writel(1 << offset, addr + DB8500_GPIO_DATC); +} + +/** + * config_pin - configure a pin's mux attributes + * @cfg: pin confguration + * + * Configures a pin's mode (alternate function or GPIO), its pull up status, + * and its sleep mode based on the specified configuration. The @cfg is + * usually one of the SoC specific macros defined in mach/<soc>-pins.h. These + * are constructed using, and can be further enhanced with, the macros in + * plat/pincfg.h. + * + * If a pin's mode is set to GPIO, it is configured as an input to avoid + * side-effects. The gpio can be manipulated later using standard GPIO API + * calls. + */ +static void config_pin(unsigned long cfg) +{ + int pin = PIN_NUM(cfg); + int pull = PIN_PULL(cfg); + int af = PIN_ALT(cfg); + int output = PIN_DIR(cfg); + int val = PIN_VAL(cfg); + + if (output) + db8500_gpio_make_output(pin, val); + else { + db8500_gpio_make_input(pin); + db8500_gpio_set_pull(pin, pull); + } + + gpio_set_mode(pin, af); +} + +/** + * db8500_config_pins - configure several pins at once + * @cfgs: array of pin configurations + * @num: number of elments in the array + * + * Configures several pins using config_pin(). Refer to that function for + * further information. + */ +void db8500_gpio_config_pins(unsigned long *cfgs, size_t num) +{ + size_t i; + + for (i = 0; i < num; i++) + config_pin(cfgs[i]); +} diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 661553552e..2c79bff62b 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -41,13 +41,15 @@ static unsigned long gpio_ports[] = { [0] = GPIO1_BASE_ADDR, [1] = GPIO2_BASE_ADDR, [2] = GPIO3_BASE_ADDR, -#if defined(CONFIG_MX25) || defined(CONFIG_MX51) || defined(CONFIG_MX53) || \ - defined(CONFIG_MX6Q) +#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ + defined(CONFIG_MX53) || defined(CONFIG_MX6Q) [3] = GPIO4_BASE_ADDR, #endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6Q) +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6Q) [4] = GPIO5_BASE_ADDR, [5] = GPIO6_BASE_ADDR, +#endif +#if defined(CONFIG_MX53) || defined(CONFIG_MX6Q) [6] = GPIO7_BASE_ADDR, #endif }; @@ -116,7 +118,7 @@ int gpio_get_value(unsigned gpio) regs = (struct gpio_regs *)gpio_ports[port]; - val = (readl(®s->gpio_dr) >> gpio) & 0x01; + val = (readl(®s->gpio_psr) >> gpio) & 0x01; return val; } diff --git a/drivers/gpio/mxs_gpio.c b/drivers/gpio/mxs_gpio.c index 38dbc81b45..29f19badda 100644 --- a/drivers/gpio/mxs_gpio.c +++ b/drivers/gpio/mxs_gpio.c @@ -73,8 +73,8 @@ int gpio_get_value(unsigned gpio) { uint32_t bank = PAD_BANK(gpio); uint32_t offset = PINCTRL_DIN(bank); - struct mx28_register_32 *reg = - (struct mx28_register_32 *)(MXS_PINCTRL_BASE + offset); + struct mxs_register_32 *reg = + (struct mxs_register_32 *)(MXS_PINCTRL_BASE + offset); return (readl(®->reg) >> PAD_PIN(gpio)) & 1; } @@ -83,8 +83,8 @@ void gpio_set_value(unsigned gpio, int value) { uint32_t bank = PAD_BANK(gpio); uint32_t offset = PINCTRL_DOUT(bank); - struct mx28_register_32 *reg = - (struct mx28_register_32 *)(MXS_PINCTRL_BASE + offset); + struct mxs_register_32 *reg = + (struct mxs_register_32 *)(MXS_PINCTRL_BASE + offset); if (value) writel(1 << PAD_PIN(gpio), ®->reg_set); @@ -96,8 +96,8 @@ int gpio_direction_input(unsigned gpio) { uint32_t bank = PAD_BANK(gpio); uint32_t offset = PINCTRL_DOE(bank); - struct mx28_register_32 *reg = - (struct mx28_register_32 *)(MXS_PINCTRL_BASE + offset); + struct mxs_register_32 *reg = + (struct mxs_register_32 *)(MXS_PINCTRL_BASE + offset); writel(1 << PAD_PIN(gpio), ®->reg_clr); @@ -108,8 +108,8 @@ int gpio_direction_output(unsigned gpio, int value) { uint32_t bank = PAD_BANK(gpio); uint32_t offset = PINCTRL_DOE(bank); - struct mx28_register_32 *reg = - (struct mx28_register_32 *)(MXS_PINCTRL_BASE + offset); + struct mxs_register_32 *reg = + (struct mxs_register_32 *)(MXS_PINCTRL_BASE + offset); writel(1 << PAD_PIN(gpio), ®->reg_set); diff --git a/arch/arm/cpu/armv7/omap-common/gpio.c b/drivers/gpio/omap_gpio.c index fc89f2a42b..fc89f2a42b 100644 --- a/arch/arm/cpu/armv7/omap-common/gpio.c +++ b/drivers/gpio/omap_gpio.c diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index 60ec6e3d78..8cfcf8283b 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -1,5 +1,5 @@ /* - * NVIDIA Tegra2 GPIO handling. + * NVIDIA Tegra20 GPIO handling. * (C) Copyright 2010-2012 * NVIDIA Corporation <www.nvidia.com> * @@ -30,14 +30,14 @@ #include <common.h> #include <asm/io.h> #include <asm/bitops.h> -#include <asm/arch/tegra2.h> +#include <asm/arch/tegra20.h> #include <asm/gpio.h> enum { - TEGRA2_CMD_INFO, - TEGRA2_CMD_PORT, - TEGRA2_CMD_OUTPUT, - TEGRA2_CMD_INPUT, + TEGRA20_CMD_INFO, + TEGRA20_CMD_PORT, + TEGRA20_CMD_OUTPUT, + TEGRA20_CMD_INPUT, }; static struct gpio_names { diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c index 48aaaa6268..2a193c220d 100644 --- a/drivers/i2c/mxs_i2c.c +++ b/drivers/i2c/mxs_i2c.c @@ -38,10 +38,10 @@ void mxs_i2c_reset(void) { - struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; int ret; - ret = mx28_reset_block(&i2c_regs->hw_i2c_ctrl0_reg); + ret = mxs_reset_block(&i2c_regs->hw_i2c_ctrl0_reg); if (ret) { debug("MXS I2C: Block reset timeout\n"); return; @@ -57,7 +57,7 @@ void mxs_i2c_reset(void) void mxs_i2c_setup_read(uint8_t chip, int len) { - struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; writel(I2C_QUEUECMD_RETAIN_CLOCK | I2C_QUEUECMD_PRE_SEND_START | I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION | @@ -76,7 +76,7 @@ void mxs_i2c_setup_read(uint8_t chip, int len) void mxs_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int blen, int stop) { - struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; uint32_t data; int i, remain, off; @@ -119,7 +119,7 @@ void mxs_i2c_write(uchar chip, uint addr, int alen, int mxs_i2c_wait_for_ack(void) { - struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; uint32_t tmp; int timeout = MXS_I2C_MAX_TIMEOUT; @@ -157,7 +157,7 @@ err: int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { - struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; uint32_t tmp = 0; int ret; int i; @@ -212,7 +212,7 @@ int i2c_probe(uchar chip) void i2c_init(int speed, int slaveadd) { - struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE; + struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; mxs_i2c_reset(); diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 81193b0e6e..978507ba29 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -150,16 +150,19 @@ void i2c_init(int speed, int slaveadd) bus_initialized[current_bus] = 1; } -static int i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value) +static int i2c_read_byte(u8 devaddr, u16 regoffset, u8 alen, u8 *value) { int i2c_error = 0; u16 status; + int i = 2 - alen; + u8 tmpbuf[2] = {(regoffset) >> 8, regoffset & 0xff}; + u16 w; /* wait until bus not busy */ wait_for_bb(); /* one byte only */ - writew(1, &i2c_base->cnt); + writew(alen, &i2c_base->cnt); /* set slave address */ writew(devaddr, &i2c_base->sa); /* no stop bit needed here */ @@ -174,8 +177,12 @@ static int i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value) goto read_exit; } if (status & I2C_STAT_XRDY) { - /* Important: have to use byte access */ - writeb(regoffset, &i2c_base->data); + w = tmpbuf[i++]; +#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ + defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)) + w |= tmpbuf[i++] << 8; +#endif + writew(w, &i2c_base->data); writew(I2C_STAT_XRDY, &i2c_base->stat); } if (status & I2C_STAT_ARDY) { @@ -303,18 +310,18 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { int i; - if (alen > 1) { + if (alen > 2) { printf("I2C read: addr len %d not supported\n", alen); return 1; } - if (addr + len > 256) { + if (addr + len > (1 << 16)) { puts("I2C read: address out of range\n"); return 1; } for (i = 0; i < len; i++) { - if (i2c_read_byte(chip, addr + i, &buffer[i])) { + if (i2c_read_byte(chip, addr + i, alen, &buffer[i])) { puts("I2C read: I/O error\n"); i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); return 1; @@ -329,13 +336,15 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) int i; u16 status; int i2c_error = 0; + u16 w; + u8 tmpbuf[2] = {addr >> 8, addr & 0xff}; - if (alen > 1) { + if (alen > 2) { printf("I2C write: addr len %d not supported\n", alen); return 1; } - if (addr + len > 256) { + if (addr + len > (1 << 16)) { printf("I2C write: address 0x%x + 0x%x out of range\n", addr, len); return 1; @@ -353,28 +362,8 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP, &i2c_base->con); - /* Send address byte */ - status = wait_for_pin(); - - if (status == 0 || status & I2C_STAT_NACK) { - i2c_error = 1; - printf("error waiting for i2c address ACK (status=0x%x)\n", - status); - goto write_exit; - } - - if (status & I2C_STAT_XRDY) { - writeb(addr & 0xFF, &i2c_base->data); - writew(I2C_STAT_XRDY, &i2c_base->stat); - } else { - i2c_error = 1; - printf("i2c bus not ready for transmit (status=0x%x)\n", - status); - goto write_exit; - } - - /* address phase is over, now write data */ - for (i = 0; i < len; i++) { + /* Send address and data */ + for (i = -alen; i < len; i++) { status = wait_for_pin(); if (status == 0 || status & I2C_STAT_NACK) { @@ -385,7 +374,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) } if (status & I2C_STAT_XRDY) { - writeb(buffer[i], &i2c_base->data); + w = (i < 0) ? tmpbuf[2+i] : buffer[i]; +#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ + defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)) + w |= ((++i < 0) ? tmpbuf[2+i] : buffer[i]) << 8; +#endif + writew(w, &i2c_base->data); writew(I2C_STAT_XRDY, &i2c_base->stat); } else { i2c_error = 1; diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index 5b6ea0e759..b4eb49127e 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -262,7 +262,7 @@ exit: return error; } -static int tegra2_i2c_write_data(u32 addr, u8 *data, u32 len) +static int tegra20_i2c_write_data(u32 addr, u8 *data, u32 len) { int error; struct i2c_trans_info trans_info; @@ -275,12 +275,12 @@ static int tegra2_i2c_write_data(u32 addr, u8 *data, u32 len) error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info); if (error) - debug("tegra2_i2c_write_data: Error (%d) !!!\n", error); + debug("tegra20_i2c_write_data: Error (%d) !!!\n", error); return error; } -static int tegra2_i2c_read_data(u32 addr, u8 *data, u32 len) +static int tegra20_i2c_read_data(u32 addr, u8 *data, u32 len) { int error; struct i2c_trans_info trans_info; @@ -293,7 +293,7 @@ static int tegra2_i2c_read_data(u32 addr, u8 *data, u32 len) error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info); if (error) - debug("tegra2_i2c_read_data: Error (%d) !!!\n", error); + debug("tegra20_i2c_read_data: Error (%d) !!!\n", error); return error; } @@ -438,7 +438,7 @@ int i2c_write_data(uchar chip, uchar *buffer, int len) debug("\n"); /* Shift 7-bit address over for lower-level i2c functions */ - rc = tegra2_i2c_write_data(chip << 1, buffer, len); + rc = tegra20_i2c_write_data(chip << 1, buffer, len); if (rc) debug("i2c_write_data(): rc=%d\n", rc); @@ -452,7 +452,7 @@ int i2c_read_data(uchar chip, uchar *buffer, int len) debug("inside i2c_read_data():\n"); /* Shift 7-bit address over for lower-level i2c functions */ - rc = tegra2_i2c_read_data(chip << 1, buffer, len); + rc = tegra20_i2c_read_data(chip << 1, buffer, len); if (rc) { debug("i2c_read_data(): rc=%d\n", rc); return rc; diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 5c831b2611..68c6a16bcc 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libinput.o COBJS-$(CONFIG_I8042_KBD) += i8042.o -COBJS-$(CONFIG_TEGRA2_KEYBOARD) += tegra-kbc.o +COBJS-$(CONFIG_TEGRA20_KEYBOARD) += tegra-kbc.o ifdef CONFIG_PS2KBD COBJS-y += keyboard.o pc_keyb.o COBJS-$(CONFIG_PS2MULT) += ps2mult.o ps2ser.o diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index c567737015..2b96cdcd40 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -25,6 +25,10 @@ include $(TOPDIR)/config.mk LIB := $(obj)libmmc.o +ifdef CONFIG_SPL_MMC_LOAD +COBJS-$(CONFIG_SPL_MMC_LOAD) += spl_mmc_load.o +endif + COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c index 09d443ee39..db2c7ab75c 100644 --- a/drivers/mmc/arm_pl180_mmci.c +++ b/drivers/mmc/arm_pl180_mmci.c @@ -32,14 +32,10 @@ #include "arm_pl180_mmci.h" #include <malloc.h> -struct mmc_host { - struct sdi_registers *base; -}; - static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd) { u32 hoststatus, statusmask; - struct mmc_host *host = dev->priv; + struct pl180_mmc_host *host = dev->priv; statusmask = SDI_STA_CTIMEOUT | SDI_STA_CCRCFAIL; if ((cmd->resp_type & MMC_RSP_PRESENT)) @@ -53,8 +49,8 @@ static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd) writel(statusmask, &host->base->status_clear); if (hoststatus & SDI_STA_CTIMEOUT) { - printf("CMD%d time out\n", cmd->cmdidx); - return -ETIMEDOUT; + debug("CMD%d time out\n", cmd->cmdidx); + return TIMEOUT; } else if ((hoststatus & SDI_STA_CCRCFAIL) && (cmd->flags & MMC_RSP_CRC)) { printf("CMD%d CRC error\n", cmd->cmdidx); @@ -80,7 +76,7 @@ static int do_command(struct mmc *dev, struct mmc_cmd *cmd) { int result; u32 sdi_cmd = 0; - struct mmc_host *host = dev->priv; + struct pl180_mmc_host *host = dev->priv; sdi_cmd = ((cmd->cmdidx & SDI_CMD_CMDINDEX_MASK) | SDI_CMD_CPSMEN); @@ -112,7 +108,7 @@ static int read_bytes(struct mmc *dev, u32 *dest, u32 blkcount, u32 blksize) { u32 *tempbuff = dest; u64 xfercount = blkcount * blksize; - struct mmc_host *host = dev->priv; + struct pl180_mmc_host *host = dev->priv; u32 status, status_err; debug("read_bytes: blkcount=%u blksize=%u\n", blkcount, blksize); @@ -168,7 +164,7 @@ static int write_bytes(struct mmc *dev, u32 *src, u32 blkcount, u32 blksize) u32 *tempbuff = src; int i; u64 xfercount = blkcount * blksize; - struct mmc_host *host = dev->priv; + struct pl180_mmc_host *host = dev->priv; u32 status, status_err; debug("write_bytes: blkcount=%u blksize=%u\n", blkcount, blksize); @@ -227,14 +223,19 @@ static int do_data_transfer(struct mmc *dev, struct mmc_data *data) { int error = -ETIMEDOUT; - struct mmc_host *host = dev->priv; + struct pl180_mmc_host *host = dev->priv; u32 blksz = 0; u32 data_ctrl = 0; u32 data_len = (u32) (data->blocks * data->blocksize); - blksz = (ffs(data->blocksize) - 1); - data_ctrl |= ((blksz << 4) & SDI_DCTRL_DBLKSIZE_MASK); - data_ctrl |= SDI_DCTRL_DTEN; + if (!host->version2) { + blksz = (ffs(data->blocksize) - 1); + data_ctrl |= ((blksz << 4) & SDI_DCTRL_DBLKSIZE_MASK); + } else { + blksz = data->blocksize; + data_ctrl |= (blksz << SDI_DCTRL_DBLOCKSIZE_V2_SHIFT); + } + data_ctrl |= SDI_DCTRL_DTEN | SDI_DCTRL_BUSYMODE; writel(SDI_DTIMER_DEFAULT, &host->base->datatimer); writel(data_len, &host->base->datalength); @@ -257,7 +258,7 @@ static int do_data_transfer(struct mmc *dev, writel(data_ctrl, &host->base->datactrl); error = write_bytes(dev, (u32 *)data->src, (u32)data->blocks, - (u32)data->blocksize); + (u32)data->blocksize); } return error; @@ -280,17 +281,16 @@ static int host_request(struct mmc *dev, /* MMC uses open drain drivers in the enumeration phase */ static int mmc_host_reset(struct mmc *dev) { - struct mmc_host *host = dev->priv; - u32 sdi_u32 = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON; + struct pl180_mmc_host *host = dev->priv; - writel(sdi_u32, &host->base->power); + writel(host->pwr_init, &host->base->power); return 0; } static void host_set_ios(struct mmc *dev) { - struct mmc_host *host = dev->priv; + struct pl180_mmc_host *host = dev->priv; u32 sdi_clkcr; sdi_clkcr = readl(&host->base->clock); @@ -298,15 +298,26 @@ static void host_set_ios(struct mmc *dev) /* Ramp up the clock rate */ if (dev->clock) { u32 clkdiv = 0; + u32 tmp_clock; - if (dev->clock >= dev->f_max) + if (dev->clock >= dev->f_max) { + clkdiv = 0; dev->clock = dev->f_max; + } else { + clkdiv = (host->clock_in / dev->clock) - 2; + } - clkdiv = ((ARM_MCLK / dev->clock) / 2) - 1; + tmp_clock = host->clock_in / (clkdiv + 2); + while (tmp_clock > dev->clock) { + clkdiv++; + tmp_clock = host->clock_in / (clkdiv + 2); + } if (clkdiv > SDI_CLKCR_CLKDIV_MASK) clkdiv = SDI_CLKCR_CLKDIV_MASK; + tmp_clock = host->clock_in / (clkdiv + 2); + dev->clock = tmp_clock; sdi_clkcr &= ~(SDI_CLKCR_CLKDIV_MASK); sdi_clkcr |= clkdiv; } @@ -322,8 +333,11 @@ static void host_set_ios(struct mmc *dev) case 4: buswidth |= SDI_CLKCR_WIDBUS_4; break; + case 8: + buswidth |= SDI_CLKCR_WIDBUS_8; + break; default: - printf("Invalid bus width\n"); + printf("Invalid bus width: %d\n", dev->bus_width); break; } sdi_clkcr &= ~(SDI_CLKCR_WIDBUS_MASK); @@ -334,83 +348,40 @@ static void host_set_ios(struct mmc *dev) udelay(CLK_CHANGE_DELAY); } -struct mmc *alloc_mmc_struct(void) -{ - struct mmc_host *host = NULL; - struct mmc *mmc_device = NULL; - - host = malloc(sizeof(struct mmc_host)); - if (!host) - return NULL; - - mmc_device = malloc(sizeof(struct mmc)); - if (!mmc_device) - goto err; - - mmc_device->priv = host; - return mmc_device; - -err: - free(host); - return NULL; -} - /* * mmc_host_init - initialize the mmc controller. * Set initial clock and power for mmc slot. * Initialize mmc struct and register with mmc framework. */ -static int arm_pl180_mmci_host_init(struct mmc *dev) +int arm_pl180_mmci_init(struct pl180_mmc_host *host) { - struct mmc_host *host = dev->priv; + struct mmc *dev; u32 sdi_u32; - host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; + dev = malloc(sizeof(struct mmc)); + if (!dev) + return -ENOMEM; - /* Initially set power-on, full voltage & MMCI read */ - sdi_u32 = INIT_PWR; - writel(sdi_u32, &host->base->power); + memset(dev, 0, sizeof(struct mmc)); + dev->priv = host; - /* setting clk freq 505KHz */ - sdi_u32 = SDI_CLKCR_CLKDIV_INIT | SDI_CLKCR_CLKEN; - writel(sdi_u32, &host->base->clock); + writel(host->pwr_init, &host->base->power); + writel(host->clkdiv_init, &host->base->clock); udelay(CLK_CHANGE_DELAY); /* Disable mmc interrupts */ sdi_u32 = readl(&host->base->mask0) & ~SDI_MASK0_MASK; writel(sdi_u32, &host->base->mask0); - - sprintf(dev->name, "MMC"); - dev->clock = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT + 1)); + strncpy(dev->name, host->name, sizeof(dev->name)); dev->send_cmd = host_request; dev->set_ios = host_set_ios; dev->init = mmc_host_reset; dev->getcd = NULL; - dev->host_caps = 0; - dev->voltages = VOLTAGE_WINDOW_MMC; - dev->f_min = dev->clock; - dev->f_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; - - return 0; -} - -int arm_pl180_mmci_init(void) -{ - int error; - struct mmc *dev; - - dev = alloc_mmc_struct(); - if (!dev) - return -1; - - error = arm_pl180_mmci_host_init(dev); - if (error) { - printf("mmci_host_init error - %d\n", error); - return -1; - } - - dev->b_max = 0; - + dev->host_caps = host->caps; + dev->voltages = host->voltages; + dev->f_min = host->clock_min; + dev->f_max = host->clock_max; + dev->b_max = host->b_max; mmc_register(dev); debug("registered mmc interface number is:%d\n", dev->block_dev.dev); diff --git a/drivers/mmc/arm_pl180_mmci.h b/drivers/mmc/arm_pl180_mmci.h index 42fbe3e386..06709ed7fb 100644 --- a/drivers/mmc/arm_pl180_mmci.h +++ b/drivers/mmc/arm_pl180_mmci.h @@ -26,8 +26,6 @@ #ifndef __ARM_PL180_MMCI_H__ #define __ARM_PL180_MMCI_H__ -int arm_pl180_mmci_init(void); - #define COMMAND_REG_DELAY 300 #define DATA_REG_DELAY 1000 #define CLK_CHANGE_DELAY 2000 @@ -59,8 +57,13 @@ int arm_pl180_mmci_init(void); #define SDI_CLKCR_WIDBUS_MASK 0x00001800 #define SDI_CLKCR_WIDBUS_1 0x00000000 #define SDI_CLKCR_WIDBUS_4 0x00000800 +/* V2 only */ +#define SDI_CLKCR_WIDBUS_8 0x00001000 +#define SDI_CLKCR_NEDGE 0x00002000 +#define SDI_CLKCR_HWFC_EN 0x00004000 -#define SDI_CLKCR_CLKDIV_INIT 0x000000C6 /* MCLK/(2*(0xC6+1)) => 505KHz */ +#define SDI_CLKCR_CLKDIV_INIT_V1 0x000000C6 /* MCLK/(2*(0xC6+1)) => 505KHz */ +#define SDI_CLKCR_CLKDIV_INIT_V2 0x000000FD /* SDI command register bits */ #define SDI_CMD_CMDINDEX_MASK 0x000000FF @@ -144,6 +147,8 @@ int arm_pl180_mmci_init(void); #define SDI_DCTRL_DBOOTMODEEN 0x00002000 #define SDI_DCTRL_BUSYMODE 0x00004000 #define SDI_DCTRL_DDR_MODE 0x00008000 +#define SDI_DCTRL_DBLOCKSIZE_V2_MASK 0x7fff0000 +#define SDI_DCTRL_DBLOCKSIZE_V2_SHIFT 16 #define SDI_FIFO_BURST_SIZE 8 @@ -180,4 +185,20 @@ struct sdi_registers { u32 pcell_id3; /* 0xFFC*/ }; +struct pl180_mmc_host { + struct sdi_registers *base; + char name[32]; + unsigned int b_max; + unsigned int voltages; + unsigned int caps; + unsigned int clock_in; + unsigned int clock_min; + unsigned int clock_max; + unsigned int clkdiv_init; + unsigned int pwr_init; + int version2; +}; + +int arm_pl180_mmci_init(struct pl180_mmc_host *); + #endif diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index b6c969d2c8..3f8d30db4c 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -479,9 +479,10 @@ static int esdhc_init(struct mmc *mmc) while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout) udelay(1000); +#ifndef ARCH_MXC /* Enable cache snooping */ - if (cfg && !cfg->no_snoop) - esdhc_write32(®s->scr, 0x00000040); + esdhc_write32(®s->scr, 0x00000040); +#endif esdhc_write32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN); diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index 4187a94120..9a98c6b85b 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -43,16 +43,9 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/dma.h> -/* - * CONFIG_MXS_MMC_DMA: This feature is highly experimental and has no - * performance benefit unless you operate the platform with - * data cache enabled. This is disabled by default, enable - * only if you know what you're doing. - */ - struct mxsmmc_priv { int id; - struct mx28_ssp_regs *regs; + struct mxs_ssp_regs *regs; uint32_t clkseq_bypass; uint32_t *clkctrl_ssp; uint32_t buswidth; @@ -61,6 +54,87 @@ struct mxsmmc_priv { }; #define MXSMMC_MAX_TIMEOUT 10000 +#define MXSMMC_SMALL_TRANSFER 512 + +static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data) +{ + struct mxs_ssp_regs *ssp_regs = priv->regs; + uint32_t *data_ptr; + int timeout = MXSMMC_MAX_TIMEOUT; + uint32_t reg; + uint32_t data_count = data->blocksize * data->blocks; + + if (data->flags & MMC_DATA_READ) { + data_ptr = (uint32_t *)data->dest; + while (data_count && --timeout) { + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & SSP_STATUS_FIFO_EMPTY)) { + *data_ptr++ = readl(&ssp_regs->hw_ssp_data); + data_count -= 4; + timeout = MXSMMC_MAX_TIMEOUT; + } else + udelay(1000); + } + } else { + data_ptr = (uint32_t *)data->src; + timeout *= 100; + while (data_count && --timeout) { + reg = readl(&ssp_regs->hw_ssp_status); + if (!(reg & SSP_STATUS_FIFO_FULL)) { + writel(*data_ptr++, &ssp_regs->hw_ssp_data); + data_count -= 4; + timeout = MXSMMC_MAX_TIMEOUT; + } else + udelay(1000); + } + } + + return timeout ? 0 : COMM_ERR; +} + +static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data) +{ + uint32_t data_count = data->blocksize * data->blocks; + uint32_t cache_data_count; + int dmach; + struct mxs_dma_desc *desc = priv->desc; + + memset(desc, 0, sizeof(struct mxs_dma_desc)); + desc->address = (dma_addr_t)desc; + + if (data_count % ARCH_DMA_MINALIGN) + cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); + else + cache_data_count = data_count; + + if (data->flags & MMC_DATA_READ) { + priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE; + priv->desc->cmd.address = (dma_addr_t)data->dest; + } else { + priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ; + priv->desc->cmd.address = (dma_addr_t)data->src; + + /* Flush data to DRAM so DMA can pick them up */ + flush_dcache_range((uint32_t)priv->desc->cmd.address, + (uint32_t)(priv->desc->cmd.address + cache_data_count)); + } + + priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | + (data_count << MXS_DMA_DESC_BYTES_OFFSET); + + dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id; + mxs_dma_desc_append(dmach, priv->desc); + if (mxs_dma_go(dmach)) + return COMM_ERR; + + /* The data arrived into DRAM, invalidate cache over them */ + if (data->flags & MMC_DATA_READ) { + invalidate_dcache_range((uint32_t)priv->desc->cmd.address, + (uint32_t)(priv->desc->cmd.address + cache_data_count)); + } + + return 0; +} /* * Sends a command out on the bus. Takes the mmc pointer, @@ -70,16 +144,11 @@ static int mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv; - struct mx28_ssp_regs *ssp_regs = priv->regs; + struct mxs_ssp_regs *ssp_regs = priv->regs; uint32_t reg; int timeout; - uint32_t data_count; uint32_t ctrl0; -#ifndef CONFIG_MXS_MMC_DMA - uint32_t *data_ptr; -#else - uint32_t cache_data_count; -#endif + int ret; debug("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx); @@ -117,6 +186,11 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) if (cmd->resp_type & MMC_RSP_136) /* It's a 136 bits response */ ctrl0 |= SSP_CTRL0_LONG_RESP; + if (data && (data->blocksize * data->blocks < MXSMMC_SMALL_TRANSFER)) + writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr); + else + writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set); + /* Command index */ reg = readl(&ssp_regs->hw_ssp_cmd0); reg &= ~(SSP_CMD0_CMD_MASK | SSP_CMD0_APPEND_8CYC); @@ -197,75 +271,23 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) if (!data) return 0; - data_count = data->blocksize * data->blocks; - timeout = MXSMMC_MAX_TIMEOUT; - -#ifdef CONFIG_MXS_MMC_DMA - if (data_count % ARCH_DMA_MINALIGN) - cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); - else - cache_data_count = data_count; - - if (data->flags & MMC_DATA_READ) { - priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE; - priv->desc->cmd.address = (dma_addr_t)data->dest; - } else { - priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ; - priv->desc->cmd.address = (dma_addr_t)data->src; - - /* Flush data to DRAM so DMA can pick them up */ - flush_dcache_range((uint32_t)priv->desc->cmd.address, - (uint32_t)(priv->desc->cmd.address + cache_data_count)); - } - - priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | - (data_count << MXS_DMA_DESC_BYTES_OFFSET); - - - mxs_dma_desc_append(MXS_DMA_CHANNEL_AHB_APBH_SSP0, priv->desc); - if (mxs_dma_go(MXS_DMA_CHANNEL_AHB_APBH_SSP0)) { - printf("MMC%d: DMA transfer failed\n", mmc->block_dev.dev); - return COMM_ERR; - } - - /* The data arrived into DRAM, invalidate cache over them */ - if (data->flags & MMC_DATA_READ) { - invalidate_dcache_range((uint32_t)priv->desc->cmd.address, - (uint32_t)(priv->desc->cmd.address + cache_data_count)); - } -#else - if (data->flags & MMC_DATA_READ) { - data_ptr = (uint32_t *)data->dest; - while (data_count && --timeout) { - reg = readl(&ssp_regs->hw_ssp_status); - if (!(reg & SSP_STATUS_FIFO_EMPTY)) { - *data_ptr++ = readl(&ssp_regs->hw_ssp_data); - data_count -= 4; - timeout = MXSMMC_MAX_TIMEOUT; - } else - udelay(1000); + if (data->blocksize * data->blocks < MXSMMC_SMALL_TRANSFER) { + ret = mxsmmc_send_cmd_pio(priv, data); + if (ret) { + printf("MMC%d: Data timeout with command %d " + "(status 0x%08x)!\n", + mmc->block_dev.dev, cmd->cmdidx, reg); + return ret; } } else { - data_ptr = (uint32_t *)data->src; - timeout *= 100; - while (data_count && --timeout) { - reg = readl(&ssp_regs->hw_ssp_status); - if (!(reg & SSP_STATUS_FIFO_FULL)) { - writel(*data_ptr++, &ssp_regs->hw_ssp_data); - data_count -= 4; - timeout = MXSMMC_MAX_TIMEOUT; - } else - udelay(1000); + ret = mxsmmc_send_cmd_dma(priv, data); + if (ret) { + printf("MMC%d: DMA transfer failed\n", + mmc->block_dev.dev); + return ret; } } - if (!timeout) { - printf("MMC%d: Data timeout with command %d (status 0x%08x)!\n", - mmc->block_dev.dev, cmd->cmdidx, reg); - return COMM_ERR; - } -#endif - /* Check data errors */ reg = readl(&ssp_regs->hw_ssp_status); if (reg & @@ -282,7 +304,7 @@ mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) static void mxsmmc_set_ios(struct mmc *mmc) { struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv; - struct mx28_ssp_regs *ssp_regs = priv->regs; + struct mxs_ssp_regs *ssp_regs = priv->regs; /* Set the clock speed */ if (mmc->clock) @@ -311,16 +333,16 @@ static void mxsmmc_set_ios(struct mmc *mmc) static int mxsmmc_init(struct mmc *mmc) { struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv; - struct mx28_ssp_regs *ssp_regs = priv->regs; + struct mxs_ssp_regs *ssp_regs = priv->regs; /* Reset SSP */ - mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); + mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); /* 8 bits word length in MMC mode */ clrsetbits_le32(&ssp_regs->hw_ssp_ctrl1, - SSP_CTRL1_SSP_MODE_MASK | SSP_CTRL1_WORD_LENGTH_MASK, - SSP_CTRL1_SSP_MODE_SD_MMC | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS | - SSP_CTRL1_DMA_ENABLE); + SSP_CTRL1_SSP_MODE_MASK | SSP_CTRL1_WORD_LENGTH_MASK | + SSP_CTRL1_DMA_ENABLE, + SSP_CTRL1_SSP_MODE_SD_MMC | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS); /* Set initial bit clock 400 KHz */ mx28_set_ssp_busclock(priv->id, 400); @@ -335,8 +357,8 @@ static int mxsmmc_init(struct mmc *mmc) int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)) { - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; struct mmc *mmc = NULL; struct mxsmmc_priv *priv = NULL; int ret; @@ -366,22 +388,22 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)) priv->id = id; switch (id) { case 0: - priv->regs = (struct mx28_ssp_regs *)MXS_SSP0_BASE; + priv->regs = (struct mxs_ssp_regs *)MXS_SSP0_BASE; priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP0; priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp0; break; case 1: - priv->regs = (struct mx28_ssp_regs *)MXS_SSP1_BASE; + priv->regs = (struct mxs_ssp_regs *)MXS_SSP1_BASE; priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP1; priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp1; break; case 2: - priv->regs = (struct mx28_ssp_regs *)MXS_SSP2_BASE; + priv->regs = (struct mxs_ssp_regs *)MXS_SSP2_BASE; priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP2; priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp2; break; case 3: - priv->regs = (struct mx28_ssp_regs *)MXS_SSP3_BASE; + priv->regs = (struct mxs_ssp_regs *)MXS_SSP3_BASE; priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP3; priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp3; break; diff --git a/drivers/mmc/spl_mmc_load.c b/drivers/mmc/spl_mmc_load.c new file mode 100644 index 0000000000..79a68fbcfb --- /dev/null +++ b/drivers/mmc/spl_mmc_load.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <mmc.h> + +DECLARE_GLOBAL_DATA_PTR; + +static void mmc_load_image(struct mmc *mmc) +{ + s32 err; + void (*uboot)(void) __noreturn; + + err = mmc->block_dev.block_read(0, CONFIG_SYS_MMC_U_BOOT_OFFS, + CONFIG_SYS_MMC_U_BOOT_SIZE/512, + (u32 *)CONFIG_SYS_TEXT_BASE); + + if (err <= 0) { + printf("spl: error reading image %s, err - %d\n", + "u-boot.img", err); + hang(); + } + uboot = (void *) CONFIG_SYS_TEXT_BASE; + (*uboot)(); +} + +void spl_mmc_load(void) +{ + struct mmc *mmc; + int err; + void (mmc_load_image)(struct mmc *mmc) __noreturn; + + mmc_initialize(gd->bd); + mmc = find_mmc_device(0); + if (!mmc) { + puts("spl: mmc device not found!!\n"); + hang(); + } else { + puts("spl: mmc device found\n"); + } + err = mmc_init(mmc); + if (err) { + printf("spl: mmc init failed: err - %d\n", err); + hang(); + } + mmc_load_image(mmc); +} diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index 29bf58359d..ddfa7279c2 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -39,31 +39,31 @@ struct mmc_host mmc_host[4]; * @param host Structure to fill in (base, reg, mmc_id) * @param dev_index Device index (0-3) */ -static void tegra2_get_setup(struct mmc_host *host, int dev_index) +static void tegra20_get_setup(struct mmc_host *host, int dev_index) { - debug("tegra2_get_base_mmc: dev_index = %d\n", dev_index); + debug("tegra20_get_base_mmc: dev_index = %d\n", dev_index); switch (dev_index) { case 1: - host->base = TEGRA2_SDMMC3_BASE; + host->base = TEGRA20_SDMMC3_BASE; host->mmc_id = PERIPH_ID_SDMMC3; break; case 2: - host->base = TEGRA2_SDMMC2_BASE; + host->base = TEGRA20_SDMMC2_BASE; host->mmc_id = PERIPH_ID_SDMMC2; break; case 3: - host->base = TEGRA2_SDMMC1_BASE; + host->base = TEGRA20_SDMMC1_BASE; host->mmc_id = PERIPH_ID_SDMMC1; break; case 0: default: - host->base = TEGRA2_SDMMC4_BASE; + host->base = TEGRA20_SDMMC4_BASE; host->mmc_id = PERIPH_ID_SDMMC4; break; } - host->reg = (struct tegra2_mmc *)host->base; + host->reg = (struct tegra20_mmc *)host->base; } static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data) @@ -345,7 +345,7 @@ static void mmc_change_clock(struct mmc_host *host, uint clock) debug(" mmc_change_clock called\n"); /* - * Change Tegra2 SDMMCx clock divisor here. Source is 216MHz, + * Change Tegra20 SDMMCx clock divisor here. Source is 216MHz, * PLLP_OUT0 */ if (clock == 0) @@ -494,11 +494,11 @@ static int mmc_core_init(struct mmc *mmc) return 0; } -int tegra2_mmc_getcd(struct mmc *mmc) +int tegra20_mmc_getcd(struct mmc *mmc) { struct mmc_host *host = (struct mmc_host *)mmc->priv; - debug("tegra2_mmc_getcd called\n"); + debug("tegra20_mmc_getcd called\n"); if (host->cd_gpio >= 0) return !gpio_get_value(host->cd_gpio); @@ -506,13 +506,13 @@ int tegra2_mmc_getcd(struct mmc *mmc) return 1; } -int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) +int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) { struct mmc_host *host; char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */ struct mmc *mmc; - debug(" tegra2_mmc_init: index %d, bus width %d " + debug(" tegra20_mmc_init: index %d, bus width %d " "pwr_gpio %d cd_gpio %d\n", dev_index, bus_width, pwr_gpio, cd_gpio); @@ -521,7 +521,7 @@ int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) host->clock = 0; host->pwr_gpio = pwr_gpio; host->cd_gpio = cd_gpio; - tegra2_get_setup(host, dev_index); + tegra20_get_setup(host, dev_index); clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000); @@ -539,12 +539,12 @@ int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) mmc = &mmc_dev[dev_index]; - sprintf(mmc->name, "Tegra2 SD/MMC"); + sprintf(mmc->name, "Tegra20 SD/MMC"); mmc->priv = host; mmc->send_cmd = mmc_send_cmd; mmc->set_ios = mmc_set_ios; mmc->init = mmc_core_init; - mmc->getcd = tegra2_mmc_getcd; + mmc->getcd = tegra20_mmc_getcd; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; if (bus_width == 8) @@ -559,7 +559,7 @@ int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) * max freq is highest HS eMMC clock as per the SD/MMC spec * (actually 52MHz) * Both of these are the closest equivalents w/216MHz source - * clock and Tegra2 SDMMC divisors. + * clock and Tegra20 SDMMC divisors. */ mmc->f_min = 375000; mmc->f_max = 48000000; diff --git a/drivers/mmc/tegra_mmc.h b/drivers/mmc/tegra_mmc.h index f9cdcaaaa6..b1f2564197 100644 --- a/drivers/mmc/tegra_mmc.h +++ b/drivers/mmc/tegra_mmc.h @@ -22,13 +22,13 @@ #ifndef __TEGRA_MMC_H_ #define __TEGRA_MMC_H_ -#define TEGRA2_SDMMC1_BASE 0xC8000000 -#define TEGRA2_SDMMC2_BASE 0xC8000200 -#define TEGRA2_SDMMC3_BASE 0xC8000400 -#define TEGRA2_SDMMC4_BASE 0xC8000600 +#define TEGRA20_SDMMC1_BASE 0xC8000000 +#define TEGRA20_SDMMC2_BASE 0xC8000200 +#define TEGRA20_SDMMC3_BASE 0xC8000400 +#define TEGRA20_SDMMC4_BASE 0xC8000600 #ifndef __ASSEMBLY__ -struct tegra2_mmc { +struct tegra20_mmc { unsigned int sysad; /* _SYSTEM_ADDRESS_0 */ unsigned short blksize; /* _BLOCK_SIZE_BLOCK_COUNT_0 15:00 */ unsigned short blkcnt; /* _BLOCK_SIZE_BLOCK_COUNT_0 31:16 */ @@ -118,7 +118,7 @@ struct tegra2_mmc { #define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE (1 << 1) struct mmc_host { - struct tegra2_mmc *reg; + struct tegra20_mmc *reg; unsigned int version; /* SDHCI spec. version */ unsigned int clock; /* Current clock (MHz) */ unsigned int base; /* Base address, SDMMC1/2/3/4 */ diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index de663824fe..c6aa5db33c 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -5,6 +5,9 @@ * * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas * + * Add Programmable Multibit ECC support for various AT91 SoC + * (C) Copyright 2012 ATMEL, Hong Xu + * * See file CREDITS for list of people who contributed to this * project. * @@ -30,6 +33,7 @@ #include <asm/arch/at91_pio.h> #include <nand.h> +#include <watchdog.h> #ifdef CONFIG_ATMEL_NAND_HWECC @@ -41,6 +45,674 @@ #include "atmel_nand_ecc.h" /* Hardware ECC registers */ +#ifdef CONFIG_ATMEL_NAND_HW_PMECC + +struct atmel_nand_host { + struct pmecc_regs __iomem *pmecc; + struct pmecc_errloc_regs __iomem *pmerrloc; + void __iomem *pmecc_rom_base; + + u8 pmecc_corr_cap; + u16 pmecc_sector_size; + u32 pmecc_index_table_offset; + + int pmecc_bytes_per_sector; + int pmecc_sector_number; + int pmecc_degree; /* Degree of remainders */ + int pmecc_cw_len; /* Length of codeword */ + + /* lookup table for alpha_to and index_of */ + void __iomem *pmecc_alpha_to; + void __iomem *pmecc_index_of; + + /* data for pmecc computation */ + int16_t pmecc_smu[(CONFIG_PMECC_CAP + 2) * (2 * CONFIG_PMECC_CAP + 1)]; + int16_t pmecc_partial_syn[2 * CONFIG_PMECC_CAP + 1]; + int16_t pmecc_si[2 * CONFIG_PMECC_CAP + 1]; + int16_t pmecc_lmu[CONFIG_PMECC_CAP + 1]; /* polynomal order */ + int pmecc_mu[CONFIG_PMECC_CAP + 1]; + int pmecc_dmu[CONFIG_PMECC_CAP + 1]; + int pmecc_delta[CONFIG_PMECC_CAP + 1]; +}; + +static struct atmel_nand_host pmecc_host; +static struct nand_ecclayout atmel_pmecc_oobinfo; + +/* + * Return number of ecc bytes per sector according to sector size and + * correction capability + * + * Following table shows what at91 PMECC supported: + * Correction Capability Sector_512_bytes Sector_1024_bytes + * ===================== ================ ================= + * 2-bits 4-bytes 4-bytes + * 4-bits 7-bytes 7-bytes + * 8-bits 13-bytes 14-bytes + * 12-bits 20-bytes 21-bytes + * 24-bits 39-bytes 42-bytes + */ +static int pmecc_get_ecc_bytes(int cap, int sector_size) +{ + int m = 12 + sector_size / 512; + return (m * cap + 7) / 8; +} + +static void pmecc_config_ecc_layout(struct nand_ecclayout *layout, + int oobsize, int ecc_len) +{ + int i; + + layout->eccbytes = ecc_len; + + /* ECC will occupy the last ecc_len bytes continuously */ + for (i = 0; i < ecc_len; i++) + layout->eccpos[i] = oobsize - ecc_len + i; + + layout->oobfree[0].offset = 2; + layout->oobfree[0].length = + oobsize - ecc_len - layout->oobfree[0].offset; +} + +static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host) +{ + int table_size; + + table_size = host->pmecc_sector_size == 512 ? + PMECC_INDEX_TABLE_SIZE_512 : PMECC_INDEX_TABLE_SIZE_1024; + + /* the ALPHA lookup table is right behind the INDEX lookup table. */ + return host->pmecc_rom_base + host->pmecc_index_table_offset + + table_size * sizeof(int16_t); +} + +static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + int i; + uint32_t value; + + /* Fill odd syndromes */ + for (i = 0; i < host->pmecc_corr_cap; i++) { + value = readl(&host->pmecc->rem_port[sector].rem[i / 2]); + if (i & 1) + value >>= 16; + value &= 0xffff; + host->pmecc_partial_syn[(2 * i) + 1] = (int16_t)value; + } +} + +static void pmecc_substitute(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + int16_t __iomem *alpha_to = host->pmecc_alpha_to; + int16_t __iomem *index_of = host->pmecc_index_of; + int16_t *partial_syn = host->pmecc_partial_syn; + const int cap = host->pmecc_corr_cap; + int16_t *si; + int i, j; + + /* si[] is a table that holds the current syndrome value, + * an element of that table belongs to the field + */ + si = host->pmecc_si; + + memset(&si[1], 0, sizeof(int16_t) * (2 * cap - 1)); + + /* Computation 2t syndromes based on S(x) */ + /* Odd syndromes */ + for (i = 1; i < 2 * cap; i += 2) { + for (j = 0; j < host->pmecc_degree; j++) { + if (partial_syn[i] & (0x1 << j)) + si[i] = readw(alpha_to + i * j) ^ si[i]; + } + } + /* Even syndrome = (Odd syndrome) ** 2 */ + for (i = 2, j = 1; j <= cap; i = ++j << 1) { + if (si[j] == 0) { + si[i] = 0; + } else { + int16_t tmp; + + tmp = readw(index_of + si[j]); + tmp = (tmp * 2) % host->pmecc_cw_len; + si[i] = readw(alpha_to + tmp); + } + } +} + +/* + * This function defines a Berlekamp iterative procedure for + * finding the value of the error location polynomial. + * The input is si[], initialize by pmecc_substitute(). + * The output is smu[][]. + * + * This function is written according to chip datasheet Chapter: + * Find the Error Location Polynomial Sigma(x) of Section: + * Programmable Multibit ECC Control (PMECC). + */ +static void pmecc_get_sigma(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + + int16_t *lmu = host->pmecc_lmu; + int16_t *si = host->pmecc_si; + int *mu = host->pmecc_mu; + int *dmu = host->pmecc_dmu; /* Discrepancy */ + int *delta = host->pmecc_delta; /* Delta order */ + int cw_len = host->pmecc_cw_len; + const int16_t cap = host->pmecc_corr_cap; + const int num = 2 * cap + 1; + int16_t __iomem *index_of = host->pmecc_index_of; + int16_t __iomem *alpha_to = host->pmecc_alpha_to; + int i, j, k; + uint32_t dmu_0_count, tmp; + int16_t *smu = host->pmecc_smu; + + /* index of largest delta */ + int ro; + int largest; + int diff; + + /* Init the Sigma(x) */ + memset(smu, 0, sizeof(int16_t) * ARRAY_SIZE(smu)); + + dmu_0_count = 0; + + /* First Row */ + + /* Mu */ + mu[0] = -1; + + smu[0] = 1; + + /* discrepancy set to 1 */ + dmu[0] = 1; + /* polynom order set to 0 */ + lmu[0] = 0; + /* delta[0] = (mu[0] * 2 - lmu[0]) >> 1; */ + delta[0] = -1; + + /* Second Row */ + + /* Mu */ + mu[1] = 0; + /* Sigma(x) set to 1 */ + smu[num] = 1; + + /* discrepancy set to S1 */ + dmu[1] = si[1]; + + /* polynom order set to 0 */ + lmu[1] = 0; + + /* delta[1] = (mu[1] * 2 - lmu[1]) >> 1; */ + delta[1] = 0; + + for (i = 1; i <= cap; i++) { + mu[i + 1] = i << 1; + /* Begin Computing Sigma (Mu+1) and L(mu) */ + /* check if discrepancy is set to 0 */ + if (dmu[i] == 0) { + dmu_0_count++; + + tmp = ((cap - (lmu[i] >> 1) - 1) / 2); + if ((cap - (lmu[i] >> 1) - 1) & 0x1) + tmp += 2; + else + tmp += 1; + + if (dmu_0_count == tmp) { + for (j = 0; j <= (lmu[i] >> 1) + 1; j++) + smu[(cap + 1) * num + j] = + smu[i * num + j]; + + lmu[cap + 1] = lmu[i]; + return; + } + + /* copy polynom */ + for (j = 0; j <= lmu[i] >> 1; j++) + smu[(i + 1) * num + j] = smu[i * num + j]; + + /* copy previous polynom order to the next */ + lmu[i + 1] = lmu[i]; + } else { + ro = 0; + largest = -1; + /* find largest delta with dmu != 0 */ + for (j = 0; j < i; j++) { + if ((dmu[j]) && (delta[j] > largest)) { + largest = delta[j]; + ro = j; + } + } + + /* compute difference */ + diff = (mu[i] - mu[ro]); + + /* Compute degree of the new smu polynomial */ + if ((lmu[i] >> 1) > ((lmu[ro] >> 1) + diff)) + lmu[i + 1] = lmu[i]; + else + lmu[i + 1] = ((lmu[ro] >> 1) + diff) * 2; + + /* Init smu[i+1] with 0 */ + for (k = 0; k < num; k++) + smu[(i + 1) * num + k] = 0; + + /* Compute smu[i+1] */ + for (k = 0; k <= lmu[ro] >> 1; k++) { + int16_t a, b, c; + + if (!(smu[ro * num + k] && dmu[i])) + continue; + a = readw(index_of + dmu[i]); + b = readw(index_of + dmu[ro]); + c = readw(index_of + smu[ro * num + k]); + tmp = a + (cw_len - b) + c; + a = readw(alpha_to + tmp % cw_len); + smu[(i + 1) * num + (k + diff)] = a; + } + + for (k = 0; k <= lmu[i] >> 1; k++) + smu[(i + 1) * num + k] ^= smu[i * num + k]; + } + + /* End Computing Sigma (Mu+1) and L(mu) */ + /* In either case compute delta */ + delta[i + 1] = (mu[i + 1] * 2 - lmu[i + 1]) >> 1; + + /* Do not compute discrepancy for the last iteration */ + if (i >= cap) + continue; + + for (k = 0; k <= (lmu[i + 1] >> 1); k++) { + tmp = 2 * (i - 1); + if (k == 0) { + dmu[i + 1] = si[tmp + 3]; + } else if (smu[(i + 1) * num + k] && si[tmp + 3 - k]) { + int16_t a, b, c; + a = readw(index_of + + smu[(i + 1) * num + k]); + b = si[2 * (i - 1) + 3 - k]; + c = readw(index_of + b); + tmp = a + c; + tmp %= cw_len; + dmu[i + 1] = readw(alpha_to + tmp) ^ + dmu[i + 1]; + } + } + } +} + +static int pmecc_err_location(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + const int cap = host->pmecc_corr_cap; + const int num = 2 * cap + 1; + int sector_size = host->pmecc_sector_size; + int err_nbr = 0; /* number of error */ + int roots_nbr; /* number of roots */ + int i; + uint32_t val; + int16_t *smu = host->pmecc_smu; + int timeout = PMECC_MAX_TIMEOUT_US; + + writel(PMERRLOC_DISABLE, &host->pmerrloc->eldis); + + for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) { + writel(smu[(cap + 1) * num + i], &host->pmerrloc->sigma[i]); + err_nbr++; + } + + val = PMERRLOC_ELCFG_NUM_ERRORS(err_nbr - 1); + if (sector_size == 1024) + val |= PMERRLOC_ELCFG_SECTOR_1024; + + writel(val, &host->pmerrloc->elcfg); + writel(sector_size * 8 + host->pmecc_degree * cap, + &host->pmerrloc->elen); + + while (--timeout) { + if (readl(&host->pmerrloc->elisr) & PMERRLOC_CALC_DONE) + break; + WATCHDOG_RESET(); + udelay(1); + } + + if (!timeout) { + printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n"); + return -1; + } + + roots_nbr = (readl(&host->pmerrloc->elisr) & PMERRLOC_ERR_NUM_MASK) + >> 8; + /* Number of roots == degree of smu hence <= cap */ + if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1) + return err_nbr - 1; + + /* Number of roots does not match the degree of smu + * unable to correct error */ + return -1; +} + +static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, + int sector_num, int extra_bytes, int err_nbr) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + int i = 0; + int byte_pos, bit_pos, sector_size, pos; + uint32_t tmp; + uint8_t err_byte; + + sector_size = host->pmecc_sector_size; + + while (err_nbr) { + tmp = readl(&host->pmerrloc->el[i]) - 1; + byte_pos = tmp / 8; + bit_pos = tmp % 8; + + if (byte_pos >= (sector_size + extra_bytes)) + BUG(); /* should never happen */ + + if (byte_pos < sector_size) { + err_byte = *(buf + byte_pos); + *(buf + byte_pos) ^= (1 << bit_pos); + + pos = sector_num * host->pmecc_sector_size + byte_pos; + printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + pos, bit_pos, err_byte, *(buf + byte_pos)); + } else { + /* Bit flip in OOB area */ + tmp = sector_num * host->pmecc_bytes_per_sector + + (byte_pos - sector_size); + err_byte = ecc[tmp]; + ecc[tmp] ^= (1 << bit_pos); + + pos = tmp + nand_chip->ecc.layout->eccpos[0]; + printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + pos, bit_pos, err_byte, ecc[tmp]); + } + + i++; + err_nbr--; + } + + return; +} + +static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf, + u8 *ecc) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + int i, err_nbr, eccbytes; + uint8_t *buf_pos; + + eccbytes = nand_chip->ecc.bytes; + for (i = 0; i < eccbytes; i++) + if (ecc[i] != 0xff) + goto normal_check; + /* Erased page, return OK */ + return 0; + +normal_check: + for (i = 0; i < host->pmecc_sector_number; i++) { + err_nbr = 0; + if (pmecc_stat & 0x1) { + buf_pos = buf + i * host->pmecc_sector_size; + + pmecc_gen_syndrome(mtd, i); + pmecc_substitute(mtd); + pmecc_get_sigma(mtd); + + err_nbr = pmecc_err_location(mtd); + if (err_nbr == -1) { + printk(KERN_ERR "PMECC: Too many errors\n"); + mtd->ecc_stats.failed++; + return -EIO; + } else { + pmecc_correct_data(mtd, buf_pos, ecc, i, + host->pmecc_bytes_per_sector, err_nbr); + mtd->ecc_stats.corrected += err_nbr; + } + } + pmecc_stat >>= 1; + } + + return 0; +} + +static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int page) +{ + struct atmel_nand_host *host = chip->priv; + int eccsize = chip->ecc.size; + uint8_t *oob = chip->oob_poi; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint32_t stat; + int timeout = PMECC_MAX_TIMEOUT_US; + + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_RST); + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DISABLE); + pmecc_writel(host->pmecc, cfg, ((pmecc_readl(host->pmecc, cfg)) + & ~PMECC_CFG_WRITE_OP) | PMECC_CFG_AUTO_ENABLE); + + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE); + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DATA); + + chip->read_buf(mtd, buf, eccsize); + chip->read_buf(mtd, oob, mtd->oobsize); + + while (--timeout) { + if (!(pmecc_readl(host->pmecc, sr) & PMECC_SR_BUSY)) + break; + WATCHDOG_RESET(); + udelay(1); + } + + if (!timeout) { + printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n"); + return -1; + } + + stat = pmecc_readl(host->pmecc, isr); + if (stat != 0) + if (pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]) != 0) + return -EIO; + + return 0; +} + +static void atmel_nand_pmecc_write_page(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf) +{ + struct atmel_nand_host *host = chip->priv; + uint32_t *eccpos = chip->ecc.layout->eccpos; + int i, j; + int timeout = PMECC_MAX_TIMEOUT_US; + + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_RST); + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DISABLE); + + pmecc_writel(host->pmecc, cfg, (pmecc_readl(host->pmecc, cfg) | + PMECC_CFG_WRITE_OP) & ~PMECC_CFG_AUTO_ENABLE); + + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE); + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DATA); + + chip->write_buf(mtd, (u8 *)buf, mtd->writesize); + + while (--timeout) { + if (!(pmecc_readl(host->pmecc, sr) & PMECC_SR_BUSY)) + break; + WATCHDOG_RESET(); + udelay(1); + } + + if (!timeout) { + printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n"); + return; + } + + for (i = 0; i < host->pmecc_sector_number; i++) { + for (j = 0; j < host->pmecc_bytes_per_sector; j++) { + int pos; + + pos = i * host->pmecc_bytes_per_sector + j; + chip->oob_poi[eccpos[pos]] = + readb(&host->pmecc->ecc_port[i].ecc[j]); + } + } + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); +} + +static void atmel_pmecc_core_init(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + uint32_t val = 0; + struct nand_ecclayout *ecc_layout; + + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_RST); + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_DISABLE); + + switch (host->pmecc_corr_cap) { + case 2: + val = PMECC_CFG_BCH_ERR2; + break; + case 4: + val = PMECC_CFG_BCH_ERR4; + break; + case 8: + val = PMECC_CFG_BCH_ERR8; + break; + case 12: + val = PMECC_CFG_BCH_ERR12; + break; + case 24: + val = PMECC_CFG_BCH_ERR24; + break; + } + + if (host->pmecc_sector_size == 512) + val |= PMECC_CFG_SECTOR512; + else if (host->pmecc_sector_size == 1024) + val |= PMECC_CFG_SECTOR1024; + + switch (host->pmecc_sector_number) { + case 1: + val |= PMECC_CFG_PAGE_1SECTOR; + break; + case 2: + val |= PMECC_CFG_PAGE_2SECTORS; + break; + case 4: + val |= PMECC_CFG_PAGE_4SECTORS; + break; + case 8: + val |= PMECC_CFG_PAGE_8SECTORS; + break; + } + + val |= (PMECC_CFG_READ_OP | PMECC_CFG_SPARE_DISABLE + | PMECC_CFG_AUTO_DISABLE); + pmecc_writel(host->pmecc, cfg, val); + + ecc_layout = nand_chip->ecc.layout; + pmecc_writel(host->pmecc, sarea, mtd->oobsize - 1); + pmecc_writel(host->pmecc, saddr, ecc_layout->eccpos[0]); + pmecc_writel(host->pmecc, eaddr, + ecc_layout->eccpos[ecc_layout->eccbytes - 1]); + /* See datasheet about PMECC Clock Control Register */ + pmecc_writel(host->pmecc, clk, PMECC_CLK_133MHZ); + pmecc_writel(host->pmecc, idr, 0xff); + pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE); +} + +static int atmel_pmecc_nand_init_params(struct nand_chip *nand, + struct mtd_info *mtd) +{ + struct atmel_nand_host *host; + int cap, sector_size; + + host = nand->priv = &pmecc_host; + + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.calculate = NULL; + nand->ecc.correct = NULL; + nand->ecc.hwctl = NULL; + + cap = host->pmecc_corr_cap = CONFIG_PMECC_CAP; + sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE; + host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET; + + printk(KERN_INFO "Initialize PMECC params, cap: %d, sector: %d\n", + cap, sector_size); + + host->pmecc = (struct pmecc_regs __iomem *) ATMEL_BASE_PMECC; + host->pmerrloc = (struct pmecc_errloc_regs __iomem *) + ATMEL_BASE_PMERRLOC; + host->pmecc_rom_base = (void __iomem *) ATMEL_BASE_ROM; + + /* ECC is calculated for the whole page (1 step) */ + nand->ecc.size = mtd->writesize; + + /* set ECC page size and oob layout */ + switch (mtd->writesize) { + case 2048: + case 4096: + host->pmecc_degree = PMECC_GF_DIMENSION_13; + host->pmecc_cw_len = (1 << host->pmecc_degree) - 1; + host->pmecc_sector_number = mtd->writesize / sector_size; + host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes( + cap, sector_size); + host->pmecc_alpha_to = pmecc_get_alpha_to(host); + host->pmecc_index_of = host->pmecc_rom_base + + host->pmecc_index_table_offset; + + nand->ecc.steps = 1; + nand->ecc.bytes = host->pmecc_bytes_per_sector * + host->pmecc_sector_number; + if (nand->ecc.bytes > mtd->oobsize - 2) { + printk(KERN_ERR "No room for ECC bytes\n"); + return -EINVAL; + } + pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, + mtd->oobsize, + nand->ecc.bytes); + nand->ecc.layout = &atmel_pmecc_oobinfo; + break; + case 512: + case 1024: + /* TODO */ + printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n"); + default: + /* page size not handled by HW ECC */ + /* switching back to soft ECC */ + nand->ecc.mode = NAND_ECC_SOFT; + nand->ecc.read_page = NULL; + nand->ecc.postpad = 0; + nand->ecc.prepad = 0; + nand->ecc.bytes = 0; + return 0; + } + + nand->ecc.read_page = atmel_nand_pmecc_read_page; + nand->ecc.write_page = atmel_nand_pmecc_write_page; + + atmel_pmecc_core_init(mtd); + + return 0; +} + +#else + /* oob layout for large page size * bad block info is on bytes 0 and 1 * the bytes have to be consecutives to avoid @@ -79,7 +751,6 @@ static struct nand_ecclayout atmel_oobinfo_small = { static int atmel_nand_calculate(struct mtd_info *mtd, const u_char *dat, unsigned char *ecc_code) { - struct nand_chip *nand_chip = mtd->priv; unsigned int ecc_value; /* get the first 2 ECC bytes */ @@ -167,7 +838,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *isnull) { struct nand_chip *nand_chip = mtd->priv; - unsigned int ecc_status, ecc_parity, ecc_mode; + unsigned int ecc_status; unsigned int ecc_word, ecc_bit; /* get the status from the Status Register */ @@ -232,7 +903,63 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) { } -#endif + +int atmel_hwecc_nand_init_param(struct nand_chip *nand, struct mtd_info *mtd) +{ + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.calculate = atmel_nand_calculate; + nand->ecc.correct = atmel_nand_correct; + nand->ecc.hwctl = atmel_nand_hwctl; + nand->ecc.read_page = atmel_nand_read_page; + nand->ecc.bytes = 4; + + if (nand->ecc.mode == NAND_ECC_HW) { + /* ECC is calculated for the whole page (1 step) */ + nand->ecc.size = mtd->writesize; + + /* set ECC page size and oob layout */ + switch (mtd->writesize) { + case 512: + nand->ecc.layout = &atmel_oobinfo_small; + ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, + ATMEL_ECC_PAGESIZE_528); + break; + case 1024: + nand->ecc.layout = &atmel_oobinfo_large; + ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, + ATMEL_ECC_PAGESIZE_1056); + break; + case 2048: + nand->ecc.layout = &atmel_oobinfo_large; + ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, + ATMEL_ECC_PAGESIZE_2112); + break; + case 4096: + nand->ecc.layout = &atmel_oobinfo_large; + ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, + ATMEL_ECC_PAGESIZE_4224); + break; + default: + /* page size not handled by HW ECC */ + /* switching back to soft ECC */ + nand->ecc.mode = NAND_ECC_SOFT; + nand->ecc.calculate = NULL; + nand->ecc.correct = NULL; + nand->ecc.hwctl = NULL; + nand->ecc.read_page = NULL; + nand->ecc.postpad = 0; + nand->ecc.prepad = 0; + nand->ecc.bytes = 0; + break; + } + } + + return 0; +} + +#endif /* CONFIG_ATMEL_NAND_HW_PMECC */ + +#endif /* CONFIG_ATMEL_NAND_HWECC */ static void at91_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) @@ -267,12 +994,20 @@ static int at91_nand_ready(struct mtd_info *mtd) } #endif -int board_nand_init(struct nand_chip *nand) -{ -#ifdef CONFIG_ATMEL_NAND_HWECC - static int chip_nr = 0; - struct mtd_info *mtd; +#ifndef CONFIG_SYS_NAND_BASE_LIST +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #endif +static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE]; +static ulong base_addr[CONFIG_SYS_MAX_NAND_DEVICE] = CONFIG_SYS_NAND_BASE_LIST; + +int atmel_nand_chip_init(int devnum, ulong base_addr) +{ + int ret; + struct mtd_info *mtd = &nand_info[devnum]; + struct nand_chip *nand = &nand_chip[devnum]; + + mtd->priv = nand; + nand->IO_ADDR_R = nand->IO_ADDR_W = (void __iomem *)base_addr; nand->ecc.mode = NAND_ECC_SOFT; #ifdef CONFIG_SYS_NAND_DBW_16 @@ -284,62 +1019,32 @@ int board_nand_init(struct nand_chip *nand) #endif nand->chip_delay = 20; -#ifdef CONFIG_ATMEL_NAND_HWECC - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.calculate = atmel_nand_calculate; - nand->ecc.correct = atmel_nand_correct; - nand->ecc.hwctl = atmel_nand_hwctl; - nand->ecc.read_page = atmel_nand_read_page; - nand->ecc.bytes = 4; -#endif + ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL); + if (ret) + return ret; #ifdef CONFIG_ATMEL_NAND_HWECC - mtd = &nand_info[chip_nr++]; - mtd->priv = nand; - - /* Detect NAND chips */ - if (nand_scan_ident(mtd, 1, NULL)) { - printk(KERN_WARNING "NAND Flash not found !\n"); - return -ENXIO; - } +#ifdef CONFIG_ATMEL_NAND_HW_PMECC + ret = atmel_pmecc_nand_init_params(nand, mtd); +#else + ret = atmel_hwecc_nand_init_param(nand, mtd); +#endif + if (ret) + return ret; +#endif - if (nand->ecc.mode == NAND_ECC_HW) { - /* ECC is calculated for the whole page (1 step) */ - nand->ecc.size = mtd->writesize; + ret = nand_scan_tail(mtd); + if (!ret) + nand_register(devnum); - /* set ECC page size and oob layout */ - switch (mtd->writesize) { - case 512: - nand->ecc.layout = &atmel_oobinfo_small; - ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_528); - break; - case 1024: - nand->ecc.layout = &atmel_oobinfo_large; - ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_1056); - break; - case 2048: - nand->ecc.layout = &atmel_oobinfo_large; - ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_2112); - break; - case 4096: - nand->ecc.layout = &atmel_oobinfo_large; - ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_4224); - break; - default: - /* page size not handled by HW ECC */ - /* switching back to soft ECC */ - nand->ecc.mode = NAND_ECC_SOFT; - nand->ecc.calculate = NULL; - nand->ecc.correct = NULL; - nand->ecc.hwctl = NULL; - nand->ecc.read_page = NULL; - nand->ecc.postpad = 0; - nand->ecc.prepad = 0; - nand->ecc.bytes = 0; - break; - } - } -#endif + return ret; +} - return 0; +void board_nand_init(void) +{ + int i; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + if (atmel_nand_chip_init(i, base_addr[i])) + printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip", + i); } diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h index 1ee7f993db..4732582e7f 100644 --- a/drivers/mtd/nand/atmel_nand_ecc.h +++ b/drivers/mtd/nand/atmel_nand_ecc.h @@ -33,4 +33,117 @@ #define ATMEL_ECC_NPR 0x10 /* NParity register */ #define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */ +/* Register access macros for PMECC */ +#define pmecc_readl(addr, reg) \ + readl(&addr->reg) + +#define pmecc_writel(addr, reg, value) \ + writel((value), &addr->reg) + +/* PMECC Register Definitions */ +#define PMECC_MAX_SECTOR_NUM 8 +struct pmecc_regs { + u32 cfg; /* 0x00 PMECC Configuration Register */ + u32 sarea; /* 0x04 PMECC Spare Area Size Register */ + u32 saddr; /* 0x08 PMECC Start Address Register */ + u32 eaddr; /* 0x0C PMECC End Address Register */ + u32 clk; /* 0x10 PMECC Clock Control Register */ + u32 ctrl; /* 0x14 PMECC Control Register */ + u32 sr; /* 0x18 PMECC Status Register */ + u32 ier; /* 0x1C PMECC Interrupt Enable Register */ + u32 idr; /* 0x20 PMECC Interrupt Disable Register */ + u32 imr; /* 0x24 PMECC Interrupt Mask Register */ + u32 isr; /* 0x28 PMECC Interrupt Status Register */ + u32 reserved0[5]; /* 0x2C-0x3C Reserved */ + + /* 0x40 + sector_num * (0x40), Redundancy Registers */ + struct { + u8 ecc[44]; /* PMECC Generated Redundancy Byte Per Sector */ + u32 reserved1[5]; + } ecc_port[PMECC_MAX_SECTOR_NUM]; + + /* 0x240 + sector_num * (0x40) Remainder Registers */ + struct { + u32 rem[12]; + u32 reserved2[4]; + } rem_port[PMECC_MAX_SECTOR_NUM]; + u32 reserved3[16]; /* 0x440-0x47C Reserved */ +}; + +/* For PMECC Configuration Register */ +#define PMECC_CFG_BCH_ERR2 (0 << 0) +#define PMECC_CFG_BCH_ERR4 (1 << 0) +#define PMECC_CFG_BCH_ERR8 (2 << 0) +#define PMECC_CFG_BCH_ERR12 (3 << 0) +#define PMECC_CFG_BCH_ERR24 (4 << 0) + +#define PMECC_CFG_SECTOR512 (0 << 4) +#define PMECC_CFG_SECTOR1024 (1 << 4) + +#define PMECC_CFG_PAGE_1SECTOR (0 << 8) +#define PMECC_CFG_PAGE_2SECTORS (1 << 8) +#define PMECC_CFG_PAGE_4SECTORS (2 << 8) +#define PMECC_CFG_PAGE_8SECTORS (3 << 8) + +#define PMECC_CFG_READ_OP (0 << 12) +#define PMECC_CFG_WRITE_OP (1 << 12) + +#define PMECC_CFG_SPARE_ENABLE (1 << 16) +#define PMECC_CFG_SPARE_DISABLE (0 << 16) + +#define PMECC_CFG_AUTO_ENABLE (1 << 20) +#define PMECC_CFG_AUTO_DISABLE (0 << 20) + +/* For PMECC Clock Control Register */ +#define PMECC_CLK_133MHZ (2 << 0) + +/* For PMECC Control Register */ +#define PMECC_CTRL_RST (1 << 0) +#define PMECC_CTRL_DATA (1 << 1) +#define PMECC_CTRL_USER (1 << 2) +#define PMECC_CTRL_ENABLE (1 << 4) +#define PMECC_CTRL_DISABLE (1 << 5) + +/* For PMECC Status Register */ +#define PMECC_SR_BUSY (1 << 0) +#define PMECC_SR_ENABLE (1 << 4) + +/* PMERRLOC Register Definitions */ +struct pmecc_errloc_regs { + u32 elcfg; /* 0x00 Error Location Configuration Register */ + u32 elprim; /* 0x04 Error Location Primitive Register */ + u32 elen; /* 0x08 Error Location Enable Register */ + u32 eldis; /* 0x0C Error Location Disable Register */ + u32 elsr; /* 0x10 Error Location Status Register */ + u32 elier; /* 0x14 Error Location Interrupt Enable Register */ + u32 elidr; /* 0x08 Error Location Interrupt Disable Register */ + u32 elimr; /* 0x0C Error Location Interrupt Mask Register */ + u32 elisr; /* 0x20 Error Location Interrupt Status Register */ + u32 reserved0; /* 0x24 Reserved */ + u32 sigma[25]; /* 0x28-0x88 Error Location Sigma Registers */ + u32 el[24]; /* 0x8C-0xE8 Error Location Registers */ + u32 reserved1[5]; /* 0xEC-0xFC Reserved */ +}; + +/* For Error Location Configuration Register */ +#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0) +#define PMERRLOC_ELCFG_SECTOR_1024 (1 << 0) +#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16) + +/* For Error Location Disable Register */ +#define PMERRLOC_DISABLE (1 << 0) + +/* For Error Location Interrupt Status Register */ +#define PMERRLOC_ERR_NUM_MASK (0x1f << 8) +#define PMERRLOC_CALC_DONE (1 << 0) + +/* Galois field dimension */ +#define PMECC_GF_DIMENSION_13 13 +#define PMECC_GF_DIMENSION_14 14 + +#define PMECC_INDEX_TABLE_SIZE_512 0x2000 +#define PMECC_INDEX_TABLE_SIZE_1024 0x4000 + +#define PMECC_MAX_TIMEOUT_US (100 * 1000) + #endif diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 9c95811054..bf9414fef1 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -233,11 +233,11 @@ static uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd) */ static int mxs_nand_wait_for_bch_complete(void) { - struct mx28_bch_regs *bch_regs = (struct mx28_bch_regs *)MXS_BCH_BASE; + struct mxs_bch_regs *bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE; int timeout = MXS_NAND_BCH_TIMEOUT; int ret; - ret = mx28_wait_mask_set(&bch_regs->hw_bch_ctrl_reg, + ret = mxs_wait_mask_set(&bch_regs->hw_bch_ctrl_reg, BCH_CTRL_COMPLETE_IRQ, timeout); writel(BCH_CTRL_COMPLETE_IRQ, &bch_regs->hw_bch_ctrl_clr); @@ -338,8 +338,8 @@ static int mxs_nand_device_ready(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; struct mxs_nand_info *nand_info = chip->priv; - struct mx28_gpmi_regs *gpmi_regs = - (struct mx28_gpmi_regs *)MXS_GPMI_BASE; + struct mxs_gpmi_regs *gpmi_regs = + (struct mxs_gpmi_regs *)MXS_GPMI_BASE; uint32_t tmp; tmp = readl(&gpmi_regs->hw_gpmi_stat); @@ -968,11 +968,11 @@ static int mxs_nand_scan_bbt(struct mtd_info *mtd) { struct nand_chip *nand = mtd->priv; struct mxs_nand_info *nand_info = nand->priv; - struct mx28_bch_regs *bch_regs = (struct mx28_bch_regs *)MXS_BCH_BASE; + struct mxs_bch_regs *bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE; uint32_t tmp; /* Configure BCH and set NFC geometry */ - mx28_reset_block(&bch_regs->hw_bch_ctrl_reg); + mxs_reset_block(&bch_regs->hw_bch_ctrl_reg); /* Configure layout 0 */ tmp = (mxs_nand_ecc_chunk_cnt(mtd->writesize) - 1) @@ -1056,8 +1056,8 @@ int mxs_nand_alloc_buffers(struct mxs_nand_info *nand_info) */ int mxs_nand_init(struct mxs_nand_info *info) { - struct mx28_gpmi_regs *gpmi_regs = - (struct mx28_gpmi_regs *)MXS_GPMI_BASE; + struct mxs_gpmi_regs *gpmi_regs = + (struct mxs_gpmi_regs *)MXS_GPMI_BASE; int i = 0, j; info->desc = malloc(sizeof(struct mxs_dma_desc *) * @@ -1080,7 +1080,7 @@ int mxs_nand_init(struct mxs_nand_info *info) } /* Reset the GPMI block. */ - mx28_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg); + mxs_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg); /* * Choose NAND mode, set IRQ polarity, disable write protection and diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index ca868efb9f..f1469d1105 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -283,6 +283,7 @@ void omap_nand_switch_ecc(int32_t hardware) nand->ecc.mode = NAND_ECC_SOFT; /* Use mtd default settings */ nand->ecc.layout = NULL; + nand->ecc.size = 0; printf("SW ECC selected\n"); } diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 430f90ceaf..011cd5191c 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -71,6 +71,7 @@ COBJS-$(CONFIG_SMC91111) += smc91111.o COBJS-$(CONFIG_SMC911X) += smc911x.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o COBJS-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o +COBJS-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o COBJS-$(CONFIG_FMAN_ENET) += fsl_mdio.o COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o COBJS-$(CONFIG_ULI526X) += uli526x.o diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c new file mode 100644 index 0000000000..af3d8593eb --- /dev/null +++ b/drivers/net/cpsw.c @@ -0,0 +1,991 @@ +/* + * CPSW Ethernet Switch Driver + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <command.h> +#include <net.h> +#include <miiphy.h> +#include <malloc.h> +#include <net.h> +#include <netdev.h> +#include <cpsw.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <phy.h> + +#define BITMASK(bits) (BIT(bits) - 1) +#define PHY_REG_MASK 0x1f +#define PHY_ID_MASK 0x1f +#define NUM_DESCS (PKTBUFSRX * 2) +#define PKT_MIN 60 +#define PKT_MAX (1500 + 14 + 4 + 4) +#define CLEAR_BIT 1 +#define GIGABITEN BIT(7) +#define FULLDUPLEXEN BIT(0) +#define MIIEN BIT(15) + +/* DMA Registers */ +#define CPDMA_TXCONTROL 0x004 +#define CPDMA_RXCONTROL 0x014 +#define CPDMA_SOFTRESET 0x01c +#define CPDMA_RXFREE 0x0e0 +#define CPDMA_TXHDP_VER1 0x100 +#define CPDMA_TXHDP_VER2 0x200 +#define CPDMA_RXHDP_VER1 0x120 +#define CPDMA_RXHDP_VER2 0x220 +#define CPDMA_TXCP_VER1 0x140 +#define CPDMA_TXCP_VER2 0x240 +#define CPDMA_RXCP_VER1 0x160 +#define CPDMA_RXCP_VER2 0x260 + +#define CPDMA_RAM_ADDR 0x4a102000 + +/* Descriptor mode bits */ +#define CPDMA_DESC_SOP BIT(31) +#define CPDMA_DESC_EOP BIT(30) +#define CPDMA_DESC_OWNER BIT(29) +#define CPDMA_DESC_EOQ BIT(28) + +/* + * This timeout definition is a worst-case ultra defensive measure against + * unexpected controller lock ups. Ideally, we should never ever hit this + * scenario in practice. + */ +#define MDIO_TIMEOUT 100 /* msecs */ +#define CPDMA_TIMEOUT 100 /* msecs */ + +struct cpsw_mdio_regs { + u32 version; + u32 control; +#define CONTROL_IDLE BIT(31) +#define CONTROL_ENABLE BIT(30) + + u32 alive; + u32 link; + u32 linkintraw; + u32 linkintmasked; + u32 __reserved_0[2]; + u32 userintraw; + u32 userintmasked; + u32 userintmaskset; + u32 userintmaskclr; + u32 __reserved_1[20]; + + struct { + u32 access; + u32 physel; +#define USERACCESS_GO BIT(31) +#define USERACCESS_WRITE BIT(30) +#define USERACCESS_ACK BIT(29) +#define USERACCESS_READ (0) +#define USERACCESS_DATA (0xffff) + } user[0]; +}; + +struct cpsw_regs { + u32 id_ver; + u32 control; + u32 soft_reset; + u32 stat_port_en; + u32 ptype; +}; + +struct cpsw_slave_regs { + u32 max_blks; + u32 blk_cnt; + u32 flow_thresh; + u32 port_vlan; + u32 tx_pri_map; + u32 gap_thresh; + u32 sa_lo; + u32 sa_hi; +}; + +struct cpsw_host_regs { + u32 max_blks; + u32 blk_cnt; + u32 flow_thresh; + u32 port_vlan; + u32 tx_pri_map; + u32 cpdma_tx_pri_map; + u32 cpdma_rx_chan_map; +}; + +struct cpsw_sliver_regs { + u32 id_ver; + u32 mac_control; + u32 mac_status; + u32 soft_reset; + u32 rx_maxlen; + u32 __reserved_0; + u32 rx_pause; + u32 tx_pause; + u32 __reserved_1; + u32 rx_pri_map; +}; + +#define ALE_ENTRY_BITS 68 +#define ALE_ENTRY_WORDS DIV_ROUND_UP(ALE_ENTRY_BITS, 32) + +/* ALE Registers */ +#define ALE_CONTROL 0x08 +#define ALE_UNKNOWNVLAN 0x18 +#define ALE_TABLE_CONTROL 0x20 +#define ALE_TABLE 0x34 +#define ALE_PORTCTL 0x40 + +#define ALE_TABLE_WRITE BIT(31) + +#define ALE_TYPE_FREE 0 +#define ALE_TYPE_ADDR 1 +#define ALE_TYPE_VLAN 2 +#define ALE_TYPE_VLAN_ADDR 3 + +#define ALE_UCAST_PERSISTANT 0 +#define ALE_UCAST_UNTOUCHED 1 +#define ALE_UCAST_OUI 2 +#define ALE_UCAST_TOUCHED 3 + +#define ALE_MCAST_FWD 0 +#define ALE_MCAST_BLOCK_LEARN_FWD 1 +#define ALE_MCAST_FWD_LEARN 2 +#define ALE_MCAST_FWD_2 3 + +enum cpsw_ale_port_state { + ALE_PORT_STATE_DISABLE = 0x00, + ALE_PORT_STATE_BLOCK = 0x01, + ALE_PORT_STATE_LEARN = 0x02, + ALE_PORT_STATE_FORWARD = 0x03, +}; + +/* ALE unicast entry flags - passed into cpsw_ale_add_ucast() */ +#define ALE_SECURE 1 +#define ALE_BLOCKED 2 + +struct cpsw_slave { + struct cpsw_slave_regs *regs; + struct cpsw_sliver_regs *sliver; + int slave_num; + u32 mac_control; + struct cpsw_slave_data *data; +}; + +struct cpdma_desc { + /* hardware fields */ + u32 hw_next; + u32 hw_buffer; + u32 hw_len; + u32 hw_mode; + /* software fields */ + u32 sw_buffer; + u32 sw_len; +}; + +struct cpdma_chan { + struct cpdma_desc *head, *tail; + void *hdp, *cp, *rxfree; +}; + +#define desc_write(desc, fld, val) __raw_writel((u32)(val), &(desc)->fld) +#define desc_read(desc, fld) __raw_readl(&(desc)->fld) +#define desc_read_ptr(desc, fld) ((void *)__raw_readl(&(desc)->fld)) + +#define chan_write(chan, fld, val) __raw_writel((u32)(val), (chan)->fld) +#define chan_read(chan, fld) __raw_readl((chan)->fld) +#define chan_read_ptr(chan, fld) ((void *)__raw_readl((chan)->fld)) + +#define for_each_slave(slave, priv) \ + for (slave = (priv)->slaves; slave != (priv)->slaves + \ + (priv)->data.slaves; slave++) + +struct cpsw_priv { + struct eth_device *dev; + struct cpsw_platform_data data; + int host_port; + + struct cpsw_regs *regs; + void *dma_regs; + struct cpsw_host_regs *host_port_regs; + void *ale_regs; + + struct cpdma_desc *descs; + struct cpdma_desc *desc_free; + struct cpdma_chan rx_chan, tx_chan; + + struct cpsw_slave *slaves; + struct phy_device *phydev; + struct mii_dev *bus; +}; + +static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits) +{ + int idx; + + idx = start / 32; + start -= idx * 32; + idx = 2 - idx; /* flip */ + return (ale_entry[idx] >> start) & BITMASK(bits); +} + +static inline void cpsw_ale_set_field(u32 *ale_entry, u32 start, u32 bits, + u32 value) +{ + int idx; + + value &= BITMASK(bits); + idx = start / 32; + start -= idx * 32; + idx = 2 - idx; /* flip */ + ale_entry[idx] &= ~(BITMASK(bits) << start); + ale_entry[idx] |= (value << start); +} + +#define DEFINE_ALE_FIELD(name, start, bits) \ +static inline int cpsw_ale_get_##name(u32 *ale_entry) \ +{ \ + return cpsw_ale_get_field(ale_entry, start, bits); \ +} \ +static inline void cpsw_ale_set_##name(u32 *ale_entry, u32 value) \ +{ \ + cpsw_ale_set_field(ale_entry, start, bits, value); \ +} + +DEFINE_ALE_FIELD(entry_type, 60, 2) +DEFINE_ALE_FIELD(mcast_state, 62, 2) +DEFINE_ALE_FIELD(port_mask, 66, 3) +DEFINE_ALE_FIELD(ucast_type, 62, 2) +DEFINE_ALE_FIELD(port_num, 66, 2) +DEFINE_ALE_FIELD(blocked, 65, 1) +DEFINE_ALE_FIELD(secure, 64, 1) +DEFINE_ALE_FIELD(mcast, 40, 1) + +/* The MAC address field in the ALE entry cannot be macroized as above */ +static inline void cpsw_ale_get_addr(u32 *ale_entry, u8 *addr) +{ + int i; + + for (i = 0; i < 6; i++) + addr[i] = cpsw_ale_get_field(ale_entry, 40 - 8*i, 8); +} + +static inline void cpsw_ale_set_addr(u32 *ale_entry, u8 *addr) +{ + int i; + + for (i = 0; i < 6; i++) + cpsw_ale_set_field(ale_entry, 40 - 8*i, 8, addr[i]); +} + +static int cpsw_ale_read(struct cpsw_priv *priv, int idx, u32 *ale_entry) +{ + int i; + + __raw_writel(idx, priv->ale_regs + ALE_TABLE_CONTROL); + + for (i = 0; i < ALE_ENTRY_WORDS; i++) + ale_entry[i] = __raw_readl(priv->ale_regs + ALE_TABLE + 4 * i); + + return idx; +} + +static int cpsw_ale_write(struct cpsw_priv *priv, int idx, u32 *ale_entry) +{ + int i; + + for (i = 0; i < ALE_ENTRY_WORDS; i++) + __raw_writel(ale_entry[i], priv->ale_regs + ALE_TABLE + 4 * i); + + __raw_writel(idx | ALE_TABLE_WRITE, priv->ale_regs + ALE_TABLE_CONTROL); + + return idx; +} + +static int cpsw_ale_match_addr(struct cpsw_priv *priv, u8* addr) +{ + u32 ale_entry[ALE_ENTRY_WORDS]; + int type, idx; + + for (idx = 0; idx < priv->data.ale_entries; idx++) { + u8 entry_addr[6]; + + cpsw_ale_read(priv, idx, ale_entry); + type = cpsw_ale_get_entry_type(ale_entry); + if (type != ALE_TYPE_ADDR && type != ALE_TYPE_VLAN_ADDR) + continue; + cpsw_ale_get_addr(ale_entry, entry_addr); + if (memcmp(entry_addr, addr, 6) == 0) + return idx; + } + return -ENOENT; +} + +static int cpsw_ale_match_free(struct cpsw_priv *priv) +{ + u32 ale_entry[ALE_ENTRY_WORDS]; + int type, idx; + + for (idx = 0; idx < priv->data.ale_entries; idx++) { + cpsw_ale_read(priv, idx, ale_entry); + type = cpsw_ale_get_entry_type(ale_entry); + if (type == ALE_TYPE_FREE) + return idx; + } + return -ENOENT; +} + +static int cpsw_ale_find_ageable(struct cpsw_priv *priv) +{ + u32 ale_entry[ALE_ENTRY_WORDS]; + int type, idx; + + for (idx = 0; idx < priv->data.ale_entries; idx++) { + cpsw_ale_read(priv, idx, ale_entry); + type = cpsw_ale_get_entry_type(ale_entry); + if (type != ALE_TYPE_ADDR && type != ALE_TYPE_VLAN_ADDR) + continue; + if (cpsw_ale_get_mcast(ale_entry)) + continue; + type = cpsw_ale_get_ucast_type(ale_entry); + if (type != ALE_UCAST_PERSISTANT && + type != ALE_UCAST_OUI) + return idx; + } + return -ENOENT; +} + +static int cpsw_ale_add_ucast(struct cpsw_priv *priv, u8 *addr, + int port, int flags) +{ + u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0}; + int idx; + + cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_ADDR); + cpsw_ale_set_addr(ale_entry, addr); + cpsw_ale_set_ucast_type(ale_entry, ALE_UCAST_PERSISTANT); + cpsw_ale_set_secure(ale_entry, (flags & ALE_SECURE) ? 1 : 0); + cpsw_ale_set_blocked(ale_entry, (flags & ALE_BLOCKED) ? 1 : 0); + cpsw_ale_set_port_num(ale_entry, port); + + idx = cpsw_ale_match_addr(priv, addr); + if (idx < 0) + idx = cpsw_ale_match_free(priv); + if (idx < 0) + idx = cpsw_ale_find_ageable(priv); + if (idx < 0) + return -ENOMEM; + + cpsw_ale_write(priv, idx, ale_entry); + return 0; +} + +static int cpsw_ale_add_mcast(struct cpsw_priv *priv, u8 *addr, int port_mask) +{ + u32 ale_entry[ALE_ENTRY_WORDS] = {0, 0, 0}; + int idx, mask; + + idx = cpsw_ale_match_addr(priv, addr); + if (idx >= 0) + cpsw_ale_read(priv, idx, ale_entry); + + cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_ADDR); + cpsw_ale_set_addr(ale_entry, addr); + cpsw_ale_set_mcast_state(ale_entry, ALE_MCAST_FWD_2); + + mask = cpsw_ale_get_port_mask(ale_entry); + port_mask |= mask; + cpsw_ale_set_port_mask(ale_entry, port_mask); + + if (idx < 0) + idx = cpsw_ale_match_free(priv); + if (idx < 0) + idx = cpsw_ale_find_ageable(priv); + if (idx < 0) + return -ENOMEM; + + cpsw_ale_write(priv, idx, ale_entry); + return 0; +} + +static inline void cpsw_ale_control(struct cpsw_priv *priv, int bit, int val) +{ + u32 tmp, mask = BIT(bit); + + tmp = __raw_readl(priv->ale_regs + ALE_CONTROL); + tmp &= ~mask; + tmp |= val ? mask : 0; + __raw_writel(tmp, priv->ale_regs + ALE_CONTROL); +} + +#define cpsw_ale_enable(priv, val) cpsw_ale_control(priv, 31, val) +#define cpsw_ale_clear(priv, val) cpsw_ale_control(priv, 30, val) +#define cpsw_ale_vlan_aware(priv, val) cpsw_ale_control(priv, 2, val) + +static inline void cpsw_ale_port_state(struct cpsw_priv *priv, int port, + int val) +{ + int offset = ALE_PORTCTL + 4 * port; + u32 tmp, mask = 0x3; + + tmp = __raw_readl(priv->ale_regs + offset); + tmp &= ~mask; + tmp |= val & mask; + __raw_writel(tmp, priv->ale_regs + offset); +} + +static struct cpsw_mdio_regs *mdio_regs; + +/* wait until hardware is ready for another user access */ +static inline u32 wait_for_user_access(void) +{ + u32 reg = 0; + int timeout = MDIO_TIMEOUT; + + while (timeout-- && + ((reg = __raw_readl(&mdio_regs->user[0].access)) & USERACCESS_GO)) + udelay(10); + + if (timeout == -1) { + printf("wait_for_user_access Timeout\n"); + return -ETIMEDOUT; + } + return reg; +} + +/* wait until hardware state machine is idle */ +static inline void wait_for_idle(void) +{ + int timeout = MDIO_TIMEOUT; + + while (timeout-- && + ((__raw_readl(&mdio_regs->control) & CONTROL_IDLE) == 0)) + udelay(10); + + if (timeout == -1) + printf("wait_for_idle Timeout\n"); +} + +static int cpsw_mdio_read(struct mii_dev *bus, int phy_id, + int dev_addr, int phy_reg) +{ + unsigned short data; + u32 reg; + + if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) + return -EINVAL; + + wait_for_user_access(); + reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) | + (phy_id << 16)); + __raw_writel(reg, &mdio_regs->user[0].access); + reg = wait_for_user_access(); + + data = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -1; + return data; +} + +static int cpsw_mdio_write(struct mii_dev *bus, int phy_id, int dev_addr, + int phy_reg, u16 data) +{ + u32 reg; + + if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) + return -EINVAL; + + wait_for_user_access(); + reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) | + (phy_id << 16) | (data & USERACCESS_DATA)); + __raw_writel(reg, &mdio_regs->user[0].access); + wait_for_user_access(); + + return 0; +} + +static void cpsw_mdio_init(char *name, u32 mdio_base, u32 div) +{ + struct mii_dev *bus = mdio_alloc(); + + mdio_regs = (struct cpsw_mdio_regs *)mdio_base; + + /* set enable and clock divider */ + __raw_writel(div | CONTROL_ENABLE, &mdio_regs->control); + + /* + * wait for scan logic to settle: + * the scan time consists of (a) a large fixed component, and (b) a + * small component that varies with the mii bus frequency. These + * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x + * silicon. Since the effect of (b) was found to be largely + * negligible, we keep things simple here. + */ + udelay(1000); + + bus->read = cpsw_mdio_read; + bus->write = cpsw_mdio_write; + sprintf(bus->name, name); + + mdio_register(bus); +} + +/* Set a self-clearing bit in a register, and wait for it to clear */ +static inline void setbit_and_wait_for_clear32(void *addr) +{ + __raw_writel(CLEAR_BIT, addr); + while (__raw_readl(addr) & CLEAR_BIT) + ; +} + +#define mac_hi(mac) (((mac)[0] << 0) | ((mac)[1] << 8) | \ + ((mac)[2] << 16) | ((mac)[3] << 24)) +#define mac_lo(mac) (((mac)[4] << 0) | ((mac)[5] << 8)) + +static void cpsw_set_slave_mac(struct cpsw_slave *slave, + struct cpsw_priv *priv) +{ + __raw_writel(mac_hi(priv->dev->enetaddr), &slave->regs->sa_hi); + __raw_writel(mac_lo(priv->dev->enetaddr), &slave->regs->sa_lo); +} + +static void cpsw_slave_update_link(struct cpsw_slave *slave, + struct cpsw_priv *priv, int *link) +{ + struct phy_device *phy = priv->phydev; + u32 mac_control = 0; + + phy_startup(phy); + *link = phy->link; + + if (*link) { /* link up */ + mac_control = priv->data.mac_control; + if (phy->speed == 1000) + mac_control |= GIGABITEN; + if (phy->duplex == DUPLEX_FULL) + mac_control |= FULLDUPLEXEN; + if (phy->speed == 100) + mac_control |= MIIEN; + } + + if (mac_control == slave->mac_control) + return; + + if (mac_control) { + printf("link up on port %d, speed %d, %s duplex\n", + slave->slave_num, phy->speed, + (phy->duplex == DUPLEX_FULL) ? "full" : "half"); + } else { + printf("link down on port %d\n", slave->slave_num); + } + + __raw_writel(mac_control, &slave->sliver->mac_control); + slave->mac_control = mac_control; +} + +static int cpsw_update_link(struct cpsw_priv *priv) +{ + int link = 0; + struct cpsw_slave *slave; + + for_each_slave(slave, priv) + cpsw_slave_update_link(slave, priv, &link); + + return link; +} + +static inline u32 cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num) +{ + if (priv->host_port == 0) + return slave_num + 1; + else + return slave_num; +} + +static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv) +{ + u32 slave_port; + + setbit_and_wait_for_clear32(&slave->sliver->soft_reset); + + /* setup priority mapping */ + __raw_writel(0x76543210, &slave->sliver->rx_pri_map); + __raw_writel(0x33221100, &slave->regs->tx_pri_map); + + /* setup max packet size, and mac address */ + __raw_writel(PKT_MAX, &slave->sliver->rx_maxlen); + cpsw_set_slave_mac(slave, priv); + + slave->mac_control = 0; /* no link yet */ + + /* enable forwarding */ + slave_port = cpsw_get_slave_port(priv, slave->slave_num); + cpsw_ale_port_state(priv, slave_port, ALE_PORT_STATE_FORWARD); + + cpsw_ale_add_mcast(priv, NetBcastAddr, 1 << slave_port); +} + +static struct cpdma_desc *cpdma_desc_alloc(struct cpsw_priv *priv) +{ + struct cpdma_desc *desc = priv->desc_free; + + if (desc) + priv->desc_free = desc_read_ptr(desc, hw_next); + return desc; +} + +static void cpdma_desc_free(struct cpsw_priv *priv, struct cpdma_desc *desc) +{ + if (desc) { + desc_write(desc, hw_next, priv->desc_free); + priv->desc_free = desc; + } +} + +static int cpdma_submit(struct cpsw_priv *priv, struct cpdma_chan *chan, + void *buffer, int len) +{ + struct cpdma_desc *desc, *prev; + u32 mode; + + desc = cpdma_desc_alloc(priv); + if (!desc) + return -ENOMEM; + + if (len < PKT_MIN) + len = PKT_MIN; + + mode = CPDMA_DESC_OWNER | CPDMA_DESC_SOP | CPDMA_DESC_EOP; + + desc_write(desc, hw_next, 0); + desc_write(desc, hw_buffer, buffer); + desc_write(desc, hw_len, len); + desc_write(desc, hw_mode, mode | len); + desc_write(desc, sw_buffer, buffer); + desc_write(desc, sw_len, len); + + if (!chan->head) { + /* simple case - first packet enqueued */ + chan->head = desc; + chan->tail = desc; + chan_write(chan, hdp, desc); + goto done; + } + + /* not the first packet - enqueue at the tail */ + prev = chan->tail; + desc_write(prev, hw_next, desc); + chan->tail = desc; + + /* next check if EOQ has been triggered already */ + if (desc_read(prev, hw_mode) & CPDMA_DESC_EOQ) + chan_write(chan, hdp, desc); + +done: + if (chan->rxfree) + chan_write(chan, rxfree, 1); + return 0; +} + +static int cpdma_process(struct cpsw_priv *priv, struct cpdma_chan *chan, + void **buffer, int *len) +{ + struct cpdma_desc *desc = chan->head; + u32 status; + + if (!desc) + return -ENOENT; + + status = desc_read(desc, hw_mode); + + if (len) + *len = status & 0x7ff; + + if (buffer) + *buffer = desc_read_ptr(desc, sw_buffer); + + if (status & CPDMA_DESC_OWNER) { + if (chan_read(chan, hdp) == 0) { + if (desc_read(desc, hw_mode) & CPDMA_DESC_OWNER) + chan_write(chan, hdp, desc); + } + + return -EBUSY; + } + + chan->head = desc_read_ptr(desc, hw_next); + chan_write(chan, cp, desc); + + cpdma_desc_free(priv, desc); + return 0; +} + +static int cpsw_init(struct eth_device *dev, bd_t *bis) +{ + struct cpsw_priv *priv = dev->priv; + struct cpsw_slave *slave; + int i, ret; + + /* soft reset the controller and initialize priv */ + setbit_and_wait_for_clear32(&priv->regs->soft_reset); + + /* initialize and reset the address lookup engine */ + cpsw_ale_enable(priv, 1); + cpsw_ale_clear(priv, 1); + cpsw_ale_vlan_aware(priv, 0); /* vlan unaware mode */ + + /* setup host port priority mapping */ + __raw_writel(0x76543210, &priv->host_port_regs->cpdma_tx_pri_map); + __raw_writel(0, &priv->host_port_regs->cpdma_rx_chan_map); + + /* disable priority elevation and enable statistics on all ports */ + __raw_writel(0, &priv->regs->ptype); + + /* enable statistics collection only on the host port */ + __raw_writel(BIT(priv->host_port), &priv->regs->stat_port_en); + + cpsw_ale_port_state(priv, priv->host_port, ALE_PORT_STATE_FORWARD); + + cpsw_ale_add_ucast(priv, priv->dev->enetaddr, priv->host_port, + ALE_SECURE); + cpsw_ale_add_mcast(priv, NetBcastAddr, 1 << priv->host_port); + + for_each_slave(slave, priv) + cpsw_slave_init(slave, priv); + + cpsw_update_link(priv); + + /* init descriptor pool */ + for (i = 0; i < NUM_DESCS; i++) { + desc_write(&priv->descs[i], hw_next, + (i == (NUM_DESCS - 1)) ? 0 : &priv->descs[i+1]); + } + priv->desc_free = &priv->descs[0]; + + /* initialize channels */ + if (priv->data.version == CPSW_CTRL_VERSION_2) { + memset(&priv->rx_chan, 0, sizeof(struct cpdma_chan)); + priv->rx_chan.hdp = priv->dma_regs + CPDMA_RXHDP_VER2; + priv->rx_chan.cp = priv->dma_regs + CPDMA_RXCP_VER2; + priv->rx_chan.rxfree = priv->dma_regs + CPDMA_RXFREE; + + memset(&priv->tx_chan, 0, sizeof(struct cpdma_chan)); + priv->tx_chan.hdp = priv->dma_regs + CPDMA_TXHDP_VER2; + priv->tx_chan.cp = priv->dma_regs + CPDMA_TXCP_VER2; + } else { + memset(&priv->rx_chan, 0, sizeof(struct cpdma_chan)); + priv->rx_chan.hdp = priv->dma_regs + CPDMA_RXHDP_VER1; + priv->rx_chan.cp = priv->dma_regs + CPDMA_RXCP_VER1; + priv->rx_chan.rxfree = priv->dma_regs + CPDMA_RXFREE; + + memset(&priv->tx_chan, 0, sizeof(struct cpdma_chan)); + priv->tx_chan.hdp = priv->dma_regs + CPDMA_TXHDP_VER1; + priv->tx_chan.cp = priv->dma_regs + CPDMA_TXCP_VER1; + } + + /* clear dma state */ + setbit_and_wait_for_clear32(priv->dma_regs + CPDMA_SOFTRESET); + + if (priv->data.version == CPSW_CTRL_VERSION_2) { + for (i = 0; i < priv->data.channels; i++) { + __raw_writel(0, priv->dma_regs + CPDMA_RXHDP_VER2 + 4 + * i); + __raw_writel(0, priv->dma_regs + CPDMA_RXFREE + 4 + * i); + __raw_writel(0, priv->dma_regs + CPDMA_RXCP_VER2 + 4 + * i); + __raw_writel(0, priv->dma_regs + CPDMA_TXHDP_VER2 + 4 + * i); + __raw_writel(0, priv->dma_regs + CPDMA_TXCP_VER2 + 4 + * i); + } + } else { + for (i = 0; i < priv->data.channels; i++) { + __raw_writel(0, priv->dma_regs + CPDMA_RXHDP_VER1 + 4 + * i); + __raw_writel(0, priv->dma_regs + CPDMA_RXFREE + 4 + * i); + __raw_writel(0, priv->dma_regs + CPDMA_RXCP_VER1 + 4 + * i); + __raw_writel(0, priv->dma_regs + CPDMA_TXHDP_VER1 + 4 + * i); + __raw_writel(0, priv->dma_regs + CPDMA_TXCP_VER1 + 4 + * i); + + } + } + + __raw_writel(1, priv->dma_regs + CPDMA_TXCONTROL); + __raw_writel(1, priv->dma_regs + CPDMA_RXCONTROL); + + /* submit rx descs */ + for (i = 0; i < PKTBUFSRX; i++) { + ret = cpdma_submit(priv, &priv->rx_chan, NetRxPackets[i], + PKTSIZE); + if (ret < 0) { + printf("error %d submitting rx desc\n", ret); + break; + } + } + + return 0; +} + +static void cpsw_halt(struct eth_device *dev) +{ + struct cpsw_priv *priv = dev->priv; + + writel(0, priv->dma_regs + CPDMA_TXCONTROL); + writel(0, priv->dma_regs + CPDMA_RXCONTROL); + + /* soft reset the controller and initialize priv */ + setbit_and_wait_for_clear32(&priv->regs->soft_reset); + + /* clear dma state */ + setbit_and_wait_for_clear32(priv->dma_regs + CPDMA_SOFTRESET); + + priv->data.control(0); +} + +static int cpsw_send(struct eth_device *dev, void *packet, int length) +{ + struct cpsw_priv *priv = dev->priv; + void *buffer; + int len; + int timeout = CPDMA_TIMEOUT; + + if (!cpsw_update_link(priv)) + return -EIO; + + flush_dcache_range((unsigned long)packet, + (unsigned long)packet + length); + + /* first reap completed packets */ + while (timeout-- && + (cpdma_process(priv, &priv->tx_chan, &buffer, &len) >= 0)) + ; + + if (timeout == -1) { + printf("cpdma_process timeout\n"); + return -ETIMEDOUT; + } + + return cpdma_submit(priv, &priv->tx_chan, packet, length); +} + +static int cpsw_recv(struct eth_device *dev) +{ + struct cpsw_priv *priv = dev->priv; + void *buffer; + int len; + + cpsw_update_link(priv); + + while (cpdma_process(priv, &priv->rx_chan, &buffer, &len) >= 0) { + invalidate_dcache_range((unsigned long)buffer, + (unsigned long)buffer + PKTSIZE_ALIGN); + NetReceive(buffer, len); + cpdma_submit(priv, &priv->rx_chan, buffer, PKTSIZE); + } + + return 0; +} + +static void cpsw_slave_setup(struct cpsw_slave *slave, int slave_num, + struct cpsw_priv *priv) +{ + void *regs = priv->regs; + struct cpsw_slave_data *data = priv->data.slave_data + slave_num; + slave->slave_num = slave_num; + slave->data = data; + slave->regs = regs + data->slave_reg_ofs; + slave->sliver = regs + data->sliver_reg_ofs; +} + +static int cpsw_phy_init(struct eth_device *dev, struct cpsw_slave *slave) +{ + struct cpsw_priv *priv = (struct cpsw_priv *)dev->priv; + struct phy_device *phydev; + u32 supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full); + + phydev = phy_connect(priv->bus, 0, dev, slave->data->phy_if); + + phydev->supported &= supported; + phydev->advertising = phydev->supported; + + priv->phydev = phydev; + phy_config(phydev); + + return 1; +} + +int cpsw_register(struct cpsw_platform_data *data) +{ + struct cpsw_priv *priv; + struct cpsw_slave *slave; + void *regs = (void *)data->cpsw_base; + struct eth_device *dev; + + dev = calloc(sizeof(*dev), 1); + if (!dev) + return -ENOMEM; + + priv = calloc(sizeof(*priv), 1); + if (!priv) { + free(dev); + return -ENOMEM; + } + + priv->data = *data; + priv->dev = dev; + + priv->slaves = malloc(sizeof(struct cpsw_slave) * data->slaves); + if (!priv->slaves) { + free(dev); + free(priv); + return -ENOMEM; + } + + priv->descs = (void *)CPDMA_RAM_ADDR; + priv->host_port = data->host_port_num; + priv->regs = regs; + priv->host_port_regs = regs + data->host_port_reg_ofs; + priv->dma_regs = regs + data->cpdma_reg_ofs; + priv->ale_regs = regs + data->ale_reg_ofs; + + int idx = 0; + + for_each_slave(slave, priv) { + cpsw_slave_setup(slave, idx, priv); + idx = idx + 1; + } + + strcpy(dev->name, "cpsw"); + dev->iobase = 0; + dev->init = cpsw_init; + dev->halt = cpsw_halt; + dev->send = cpsw_send; + dev->recv = cpsw_recv; + dev->priv = priv; + + eth_register(dev); + + cpsw_mdio_init(dev->name, data->mdio_base, data->mdio_div); + priv->bus = miiphy_get_dev_by_name(dev->name); + for_each_slave(slave, priv) + cpsw_phy_init(dev, slave); + + return 1; +} diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 45784678ba..8f55cdc05f 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -471,7 +471,7 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ - defined(CONFIG_AT91SAM9XE) + defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5) macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, 0); @@ -480,7 +480,7 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ - defined(CONFIG_AT91SAM9XE) + defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5) macb_writel(macb, USRIO, MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, MACB_BIT(MII)); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 398542b9e2..2a6d0a7593 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -118,11 +118,11 @@ PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff) void *pci_map_bar(pci_dev_t pdev, int bar, int flags) { pci_addr_t pci_bus_addr; - u32 bar_response; + pci_addr_t bar_response; /* read BAR address */ pci_read_config_dword(pdev, bar, &bar_response); - pci_bus_addr = (pci_addr_t)(bar_response & ~0xf); + pci_bus_addr = bar_response & ~0xf; /* * Pass "0" as the length argument to pci_bus_to_virt. The arg @@ -151,13 +151,14 @@ void pci_register_hose(struct pci_controller* hose) *phose = hose; } -struct pci_controller *pci_bus_to_hose (int bus) +struct pci_controller *pci_bus_to_hose(int bus) { struct pci_controller *hose; - for (hose = hose_head; hose; hose = hose->next) + for (hose = hose_head; hose; hose = hose->next) { if (bus >= hose->first_busno && bus <= hose->last_busno) return hose; + } printf("pci_bus_to_hose() failed\n"); return NULL; @@ -196,21 +197,20 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) pci_dev_t bdf; int i, bus, found_multi = 0; - for (hose = hose_head; hose; hose = hose->next) - { + for (hose = hose_head; hose; hose = hose->next) { #ifdef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE for (bus = hose->last_busno; bus >= hose->first_busno; bus--) #else for (bus = hose->first_busno; bus <= hose->last_busno; bus++) #endif - for (bdf = PCI_BDF(bus,0,0); + for (bdf = PCI_BDF(bus, 0, 0); #if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX) - bdf < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); + bdf < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1, + PCI_MAX_PCI_FUNCTIONS - 1); #else - bdf < PCI_BDF(bus+1,0,0); + bdf < PCI_BDF(bus + 1, 0, 0); #endif - bdf += PCI_BDF(0,0,1)) - { + bdf += PCI_BDF(0, 0, 1)) { if (!PCI_FUNC(bdf)) { pci_read_config_byte(bdf, PCI_HEADER_TYPE, @@ -229,19 +229,19 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) PCI_DEVICE_ID, &device); - for (i=0; ids[i].vendor != 0; i++) + for (i = 0; ids[i].vendor != 0; i++) { if (vendor == ids[i].vendor && - device == ids[i].device) - { + device == ids[i].device) { if (index <= 0) return bdf; index--; } + } } } - return (-1); + return -1; } pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index) @@ -258,7 +258,7 @@ pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index) * */ -int __pci_hose_phys_to_bus (struct pci_controller *hose, +int __pci_hose_phys_to_bus(struct pci_controller *hose, phys_addr_t phys_addr, unsigned long flags, unsigned long skip_mask, @@ -297,12 +297,14 @@ pci_addr_t pci_hose_phys_to_bus (struct pci_controller *hose, int ret; if (!hose) { - puts ("pci_hose_phys_to_bus: invalid hose\n"); + puts("pci_hose_phys_to_bus: invalid hose\n"); return bus_addr; } - /* if PCI_REGION_MEM is set we do a two pass search with preference - * on matches that don't have PCI_REGION_SYS_MEMORY set */ + /* + * if PCI_REGION_MEM is set we do a two pass search with preference + * on matches that don't have PCI_REGION_SYS_MEMORY set + */ if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) { ret = __pci_hose_phys_to_bus(hose, phys_addr, flags, PCI_REGION_SYS_MEMORY, &bus_addr); @@ -313,12 +315,12 @@ pci_addr_t pci_hose_phys_to_bus (struct pci_controller *hose, ret = __pci_hose_phys_to_bus(hose, phys_addr, flags, 0, &bus_addr); if (ret) - puts ("pci_hose_phys_to_bus: invalid physical address\n"); + puts("pci_hose_phys_to_bus: invalid physical address\n"); return bus_addr; } -int __pci_hose_bus_to_phys (struct pci_controller *hose, +int __pci_hose_bus_to_phys(struct pci_controller *hose, pci_addr_t bus_addr, unsigned long flags, unsigned long skip_mask, @@ -354,12 +356,14 @@ phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose, int ret; if (!hose) { - puts ("pci_hose_bus_to_phys: invalid hose\n"); + puts("pci_hose_bus_to_phys: invalid hose\n"); return phys_addr; } - /* if PCI_REGION_MEM is set we do a two pass search with preference - * on matches that don't have PCI_REGION_SYS_MEMORY set */ + /* + * if PCI_REGION_MEM is set we do a two pass search with preference + * on matches that don't have PCI_REGION_SYS_MEMORY set + */ if ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) { ret = __pci_hose_bus_to_phys(hose, bus_addr, flags, PCI_REGION_SYS_MEMORY, &phys_addr); @@ -370,7 +374,7 @@ phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose, ret = __pci_hose_bus_to_phys(hose, bus_addr, flags, 0, &phys_addr); if (ret) - puts ("pci_hose_bus_to_phys: invalid physical address\n"); + puts("pci_hose_bus_to_phys: invalid physical address\n"); return phys_addr; } @@ -385,20 +389,21 @@ int pci_hose_config_device(struct pci_controller *hose, pci_addr_t mem, unsigned long command) { - unsigned int bar_response, old_command; + pci_addr_t bar_response; + unsigned int old_command; pci_addr_t bar_value; pci_size_t bar_size; unsigned char pin; int bar, found_mem64; - debug ("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n", - io, (u64)mem, command); + debug("PCI Config: I/O=0x%lx, Memory=0x%llx, Command=0x%lx\n", io, + (u64)mem, command); - pci_hose_write_config_dword (hose, dev, PCI_COMMAND, 0); + pci_hose_write_config_dword(hose, dev, PCI_COMMAND, 0); for (bar = PCI_BASE_ADDRESS_0; bar <= PCI_BASE_ADDRESS_5; bar += 4) { - pci_hose_write_config_dword (hose, dev, bar, 0xffffffff); - pci_hose_read_config_dword (hose, dev, bar, &bar_response); + pci_hose_write_config_dword(hose, dev, bar, 0xffffffff); + pci_hose_read_config_dword(hose, dev, bar, &bar_response); if (!bar_response) continue; @@ -418,8 +423,10 @@ int pci_hose_config_device(struct pci_controller *hose, PCI_BASE_ADDRESS_MEM_TYPE_64) { u32 bar_response_upper; u64 bar64; - pci_hose_write_config_dword(hose, dev, bar+4, 0xffffffff); - pci_hose_read_config_dword(hose, dev, bar+4, &bar_response_upper); + pci_hose_write_config_dword(hose, dev, bar + 4, + 0xffffffff); + pci_hose_read_config_dword(hose, dev, bar + 4, + &bar_response_upper); bar64 = ((u64)bar_response_upper << 32) | bar_response; @@ -442,27 +449,28 @@ int pci_hose_config_device(struct pci_controller *hose, if (found_mem64) { bar += 4; #ifdef CONFIG_SYS_PCI_64BIT - pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32)); + pci_hose_write_config_dword(hose, dev, bar, + (u32)(bar_value >> 32)); #else - pci_hose_write_config_dword (hose, dev, bar, 0x00000000); + pci_hose_write_config_dword(hose, dev, bar, 0x00000000); #endif } } /* Configure Cache Line Size Register */ - pci_hose_write_config_byte (hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); /* Configure Latency Timer */ - pci_hose_write_config_byte (hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); /* Disable interrupt line, if device says it wants to use interrupts */ - pci_hose_read_config_byte (hose, dev, PCI_INTERRUPT_PIN, &pin); + pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &pin); if (pin != 0) { - pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, 0xff); + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 0xff); } - pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &old_command); - pci_hose_write_config_dword (hose, dev, PCI_COMMAND, + pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &old_command); + pci_hose_write_config_dword(hose, dev, PCI_COMMAND, (old_command & 0xffff0000) | command); return 0; @@ -500,7 +508,8 @@ void pci_cfgfunc_config_device(struct pci_controller *hose, pci_dev_t dev, struct pci_config_table *entry) { - pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], entry->priv[2]); + pci_hose_config_device(hose, dev, entry->priv[0], entry->priv[1], + entry->priv[2]); } void pci_cfgfunc_do_nothing(struct pci_controller *hose, @@ -509,10 +518,7 @@ void pci_cfgfunc_do_nothing(struct pci_controller *hose, } /* - * - */ - -/* HJF: Changed this to return int. I think this is required + * HJF: Changed this to return int. I think this is required * to get the correct result when scanning bridges */ extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); @@ -618,10 +624,12 @@ int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) int pci_hose_scan_bus(struct pci_controller *hose, int bus) { - unsigned int sub_bus, found_multi=0; + unsigned int sub_bus, found_multi = 0; unsigned short vendor, device, class; unsigned char header_type; +#ifndef CONFIG_PCI_PNP struct pci_config_table *cfg; +#endif pci_dev_t dev; #ifdef CONFIG_PCI_SCAN_SHOW static int indent = 0; @@ -630,8 +638,9 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) sub_bus = bus; for (dev = PCI_BDF(bus,0,0); - dev < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1); - dev += PCI_BDF(0,0,1)) { + dev < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1, + PCI_MAX_PCI_FUNCTIONS - 1); + dev += PCI_BDF(0, 0, 1)) { if (pci_skip_dev(hose, dev)) continue; @@ -649,8 +658,8 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) if (!PCI_FUNC(dev)) found_multi = header_type & 0x80; - debug ("PCI Scan: Found Bus %d, Device %d, Function %d\n", - PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) ); + debug("PCI Scan: Found Bus %d, Device %d, Function %d\n", + PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device); pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); @@ -668,18 +677,16 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus) } #endif +#ifdef CONFIG_PCI_PNP + sub_bus = max(pciauto_config_device(hose, dev), sub_bus); +#else cfg = pci_find_config(hose, class, vendor, device, PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev)); if (cfg) { cfg->config_device(hose, dev, cfg); sub_bus = max(sub_bus, hose->current_busno); -#ifdef CONFIG_PCI_PNP - } else { - int n = pciauto_config_device(hose, dev); - - sub_bus = max(sub_bus, n); -#endif } +#endif #ifdef CONFIG_PCI_SCAN_SHOW indent--; @@ -711,10 +718,11 @@ int pci_hose_scan(struct pci_controller *hose) } #endif /* CONFIG_PCI_BOOTDELAY */ - /* Start scan at current_busno. + /* + * Start scan at current_busno. * PCIe will start scan at first_busno+1. */ - /* For legacy support, ensure current>=first */ + /* For legacy support, ensure current >= first */ if (hose->first_busno > hose->current_busno) hose->current_busno = hose->first_busno; #ifdef CONFIG_PCI_PNP diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index 87ee2c2408..ae61e24907 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -35,7 +35,7 @@ * */ -void pciauto_region_init(struct pci_region* res) +void pciauto_region_init(struct pci_region *res) { /* * Avoid allocating PCI resources from address 0 -- this is illegal @@ -50,7 +50,8 @@ void pciauto_region_align(struct pci_region *res, pci_size_t size) res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1; } -int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar) +int pciauto_region_allocate(struct pci_region *res, pci_size_t size, + pci_addr_t *bar) { pci_addr_t addr; @@ -88,58 +89,77 @@ void pciauto_setup_device(struct pci_controller *hose, struct pci_region *prefetch, struct pci_region *io) { - unsigned int bar_response; - pci_addr_t bar_value; + pci_addr_t bar_response; pci_size_t bar_size; - unsigned int cmdstat = 0; - struct pci_region *bar_res; + u16 cmdstat = 0; int bar, bar_nr = 0; +#ifndef CONFIG_PCI_ENUM_ONLY + pci_addr_t bar_value; + struct pci_region *bar_res; int found_mem64 = 0; +#endif - pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat); cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER; - for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) { + for (bar = PCI_BASE_ADDRESS_0; + bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) { /* Tickle the BAR and get the response */ +#ifndef CONFIG_PCI_ENUM_ONLY pci_hose_write_config_dword(hose, dev, bar, 0xffffffff); +#endif pci_hose_read_config_dword(hose, dev, bar, &bar_response); /* If BAR is not implemented go to the next BAR */ if (!bar_response) continue; +#ifndef CONFIG_PCI_ENUM_ONLY found_mem64 = 0; +#endif /* Check the BAR type and set our address mask */ if (bar_response & PCI_BASE_ADDRESS_SPACE) { bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK)) & 0xffff) + 1; +#ifndef CONFIG_PCI_ENUM_ONLY bar_res = io; +#endif DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ", bar_nr, (u64)bar_size); } else { - if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == + if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == PCI_BASE_ADDRESS_MEM_TYPE_64) { u32 bar_response_upper; u64 bar64; - pci_hose_write_config_dword(hose, dev, bar+4, 0xffffffff); - pci_hose_read_config_dword(hose, dev, bar+4, &bar_response_upper); + +#ifndef CONFIG_PCI_ENUM_ONLY + pci_hose_write_config_dword(hose, dev, bar + 4, + 0xffffffff); +#endif + pci_hose_read_config_dword(hose, dev, bar + 4, + &bar_response_upper); bar64 = ((u64)bar_response_upper << 32) | bar_response; bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1; +#ifndef CONFIG_PCI_ENUM_ONLY found_mem64 = 1; +#endif } else { bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1); } +#ifndef CONFIG_PCI_ENUM_ONLY if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH)) bar_res = prefetch; else bar_res = mem; +#endif DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%llx, ", bar_nr, (u64)bar_size); } +#ifndef CONFIG_PCI_ENUM_ONLY if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) { /* Write it out and update our limit */ pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value); @@ -158,16 +178,17 @@ void pciauto_setup_device(struct pci_controller *hose, #endif } - cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ? - PCI_COMMAND_IO : PCI_COMMAND_MEMORY; } +#endif + cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ? + PCI_COMMAND_IO : PCI_COMMAND_MEMORY; DEBUGF("\n"); bar_nr++; } - pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); + pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat); pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, CONFIG_SYS_PCI_CACHE_LINE_SIZE); pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); @@ -179,9 +200,9 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose, struct pci_region *pci_mem = hose->pci_mem; struct pci_region *pci_prefetch = hose->pci_prefetch; struct pci_region *pci_io = hose->pci_io; - unsigned int cmdstat; + u16 cmdstat; - pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat); /* Configure bus number registers */ pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, @@ -229,7 +250,8 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose, } /* Enable memory and I/O accesses, enable bus master */ - pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER); + pci_hose_write_config_word(hose, dev, PCI_COMMAND, + cmdstat | PCI_COMMAND_MASTER); } void pciauto_postscan_setup_bridge(struct pci_controller *hose, @@ -248,7 +270,7 @@ void pciauto_postscan_setup_bridge(struct pci_controller *hose, pciauto_region_align(pci_mem, 0x100000); pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT, - (pci_mem->bus_lower-1) >> 16); + (pci_mem->bus_lower - 1) >> 16); } if (pci_prefetch) { @@ -256,7 +278,7 @@ void pciauto_postscan_setup_bridge(struct pci_controller *hose, pciauto_region_align(pci_prefetch, 0x100000); pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, - (pci_prefetch->bus_lower-1) >> 16); + (pci_prefetch->bus_lower - 1) >> 16); } if (pci_io) { @@ -264,9 +286,9 @@ void pciauto_postscan_setup_bridge(struct pci_controller *hose, pciauto_region_align(pci_io, 0x1000); pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT, - ((pci_io->bus_lower-1) & 0x0000f000) >> 8); + ((pci_io->bus_lower - 1) & 0x0000f000) >> 8); pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16, - ((pci_io->bus_lower-1) & 0xffff0000) >> 16); + ((pci_io->bus_lower - 1) & 0xffff0000) >> 16); } } @@ -280,7 +302,7 @@ void pciauto_config_init(struct pci_controller *hose) hose->pci_io = hose->pci_mem = NULL; - for (i=0; i<hose->region_count; i++) { + for (i = 0; i < hose->region_count; i++) { switch(hose->regions[i].flags) { case PCI_REGION_IO: if (!hose->pci_io || @@ -338,7 +360,8 @@ void pciauto_config_init(struct pci_controller *hose) } } -/* HJF: Changed this to return int. I think this is required +/* + * HJF: Changed this to return int. I think this is required * to get the correct result when scanning bridges */ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) @@ -350,16 +373,11 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class); - switch(class) { - case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */ - DEBUGF("PCI AutoConfig: Found PowerPC device\n"); - pciauto_setup_device(hose, dev, 6, hose->pci_mem, - hose->pci_prefetch, hose->pci_io); - break; - + switch (class) { case PCI_CLASS_BRIDGE_PCI: hose->current_busno++; - pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 2, hose->pci_mem, + hose->pci_prefetch, hose->pci_io); DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev)); @@ -385,14 +403,20 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) return sub_bus; } - pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 6, hose->pci_mem, + hose->pci_prefetch, hose->pci_io); break; case PCI_CLASS_BRIDGE_CARDBUS: - /* just do a minimal setup of the bridge, let the OS take care of the rest */ - pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + /* + * just do a minimal setup of the bridge, + * let the OS take care of the rest + */ + pciauto_setup_device(hose, dev, 0, hose->pci_mem, + hose->pci_prefetch, hose->pci_io); - DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev)); + DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", + PCI_DEV(dev)); hose->current_busno++; break; @@ -412,11 +436,17 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) * the PIMMR window to be allocated (BAR0 - 1MB size) */ DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n"); - pciauto_setup_device(hose, dev, 0, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 0, hose->pci_mem, + hose->pci_prefetch, hose->pci_io); break; #endif + + case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */ + DEBUGF("PCI AutoConfig: Found PowerPC device\n"); + default: - pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io); + pciauto_setup_device(hose, dev, 6, hose->pci_mem, + hose->pci_prefetch, hose->pci_io); break; } diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 9cfdbf9753..8316e8f2e4 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -44,6 +44,7 @@ COBJS-$(CONFIG_RTC_DS164x) += ds164x.o COBJS-$(CONFIG_RTC_DS174x) += ds174x.o COBJS-$(CONFIG_RTC_DS3231) += ds3231.o COBJS-$(CONFIG_RTC_FTRTC010) += ftrtc010.o +COBJS-$(CONFIG_RTC_IMXDI) += imxdi.o COBJS-$(CONFIG_RTC_ISL1208) += isl1208.o COBJS-$(CONFIG_RTC_M41T11) += m41t11.o COBJS-$(CONFIG_RTC_M41T60) += m41t60.o @@ -58,6 +59,7 @@ COBJS-$(CONFIG_RTC_MK48T59) += mk48t59.o COBJS-$(CONFIG_RTC_MPC5200) += mpc5xxx.o COBJS-$(CONFIG_RTC_MPC8xx) += mpc8xx.o COBJS-$(CONFIG_RTC_MV) += mvrtc.o +COBJS-$(CONFIG_RTC_MX27) += mx27rtc.o COBJS-$(CONFIG_RTC_MXS) += mxsrtc.o COBJS-$(CONFIG_RTC_PCF8563) += pcf8563.o COBJS-$(CONFIG_RTC_PL031) += pl031.o diff --git a/drivers/rtc/imxdi.c b/drivers/rtc/imxdi.c new file mode 100644 index 0000000000..985ce93acf --- /dev/null +++ b/drivers/rtc/imxdi.c @@ -0,0 +1,244 @@ +/* + * (C) Copyright 2009-2012 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on the Linux rtc-imxdi.c driver, which is: + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2010 Orex Computed Radiography + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Date & Time support for Freescale i.MX DryIce RTC + */ + +#include <common.h> +#include <command.h> +#include <linux/compat.h> +#include <rtc.h> + +#if defined(CONFIG_CMD_DATE) + +#include <asm/io.h> +#include <asm/arch/imx-regs.h> + +/* DryIce Register Definitions */ + +struct imxdi_regs { + u32 dtcmr; /* Time Counter MSB Reg */ + u32 dtclr; /* Time Counter LSB Reg */ + u32 dcamr; /* Clock Alarm MSB Reg */ + u32 dcalr; /* Clock Alarm LSB Reg */ + u32 dcr; /* Control Reg */ + u32 dsr; /* Status Reg */ + u32 dier; /* Interrupt Enable Reg */ +}; + +#define DCAMR_UNSET 0xFFFFFFFF /* doomsday - 1 sec */ + +#define DCR_TCE (1 << 3) /* Time Counter Enable */ + +#define DSR_WBF (1 << 10) /* Write Busy Flag */ +#define DSR_WNF (1 << 9) /* Write Next Flag */ +#define DSR_WCF (1 << 8) /* Write Complete Flag */ +#define DSR_WEF (1 << 7) /* Write Error Flag */ +#define DSR_CAF (1 << 4) /* Clock Alarm Flag */ +#define DSR_NVF (1 << 1) /* Non-Valid Flag */ +#define DSR_SVF (1 << 0) /* Security Violation Flag */ + +#define DIER_WNIE (1 << 9) /* Write Next Interrupt Enable */ +#define DIER_WCIE (1 << 8) /* Write Complete Interrupt Enable */ +#define DIER_WEIE (1 << 7) /* Write Error Interrupt Enable */ +#define DIER_CAIE (1 << 4) /* Clock Alarm Interrupt Enable */ + +/* Driver Private Data */ + +struct imxdi_data { + struct imxdi_regs __iomem *regs; + int init_done; +}; + +static struct imxdi_data data; + +/* + * This function attempts to clear the dryice write-error flag. + * + * A dryice write error is similar to a bus fault and should not occur in + * normal operation. Clearing the flag requires another write, so the root + * cause of the problem may need to be fixed before the flag can be cleared. + */ +static void clear_write_error(void) +{ + int cnt; + + puts("### Warning: RTC - Register write error!\n"); + + /* clear the write error flag */ + __raw_writel(DSR_WEF, &data.regs->dsr); + + /* wait for it to take effect */ + for (cnt = 0; cnt < 1000; cnt++) { + if ((__raw_readl(&data.regs->dsr) & DSR_WEF) == 0) + return; + udelay(10); + } + puts("### Error: RTC - Cannot clear write-error flag!\n"); +} + +/* + * Write a dryice register and wait until it completes. + * + * Use interrupt flags to determine when the write has completed. + */ +#define DI_WRITE_WAIT(val, reg) \ +( \ + /* do the register write */ \ + __raw_writel((val), &data.regs->reg), \ + \ + di_write_wait((val), #reg) \ +) +static int di_write_wait(u32 val, const char *reg) +{ + int cnt; + int ret = 0; + int rc = 0; + + /* wait for the write to finish */ + for (cnt = 0; cnt < 100; cnt++) { + if ((__raw_readl(&data.regs->dsr) & (DSR_WCF | DSR_WEF)) != 0) { + ret = 1; + break; + } + udelay(10); + } + if (ret == 0) + printf("### Warning: RTC - Write-wait timeout " + "val = 0x%.8x reg = %s\n", val, reg); + + /* check for write error */ + if (__raw_readl(&data.regs->dsr) & DSR_WEF) { + clear_write_error(); + rc = -1; + } + + return rc; +} + +/* + * Initialize dryice hardware + */ +static int di_init(void) +{ + int rc = 0; + + data.regs = (struct imxdi_regs __iomem *)IMX_DRYICE_BASE; + + /* mask all interrupts */ + __raw_writel(0, &data.regs->dier); + + /* put dryice into valid state */ + if (__raw_readl(&data.regs->dsr) & DSR_NVF) { + rc = DI_WRITE_WAIT(DSR_NVF | DSR_SVF, dsr); + if (rc) + goto err; + } + + /* initialize alarm */ + rc = DI_WRITE_WAIT(DCAMR_UNSET, dcamr); + if (rc) + goto err; + rc = DI_WRITE_WAIT(0, dcalr); + if (rc) + goto err; + + /* clear alarm flag */ + if (__raw_readl(&data.regs->dsr) & DSR_CAF) { + rc = DI_WRITE_WAIT(DSR_CAF, dsr); + if (rc) + goto err; + } + + /* the timer won't count if it has never been written to */ + if (__raw_readl(&data.regs->dtcmr) == 0) { + rc = DI_WRITE_WAIT(0, dtcmr); + if (rc) + goto err; + } + + /* start keeping time */ + if (!(__raw_readl(&data.regs->dcr) & DCR_TCE)) { + rc = DI_WRITE_WAIT(__raw_readl(&data.regs->dcr) | DCR_TCE, dcr); + if (rc) + goto err; + } + + data.init_done = 1; + return 0; + +err: + return rc; +} + +int rtc_get(struct rtc_time *tmp) +{ + unsigned long now; + int rc = 0; + + if (!data.init_done) { + rc = di_init(); + if (rc) + goto err; + } + + now = __raw_readl(&data.regs->dtcmr); + to_tm(now, tmp); + +err: + return rc; +} + +int rtc_set(struct rtc_time *tmp) +{ + unsigned long now; + int rc; + + if (!data.init_done) { + rc = di_init(); + if (rc) + goto err; + } + + now = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + /* zero the fractional part first */ + rc = DI_WRITE_WAIT(0, dtclr); + if (rc == 0) + rc = DI_WRITE_WAIT(now, dtcmr); + +err: + return rc; +} + +void rtc_reset(void) +{ + di_init(); +} + +#endif diff --git a/drivers/rtc/mx27rtc.c b/drivers/rtc/mx27rtc.c new file mode 100644 index 0000000000..7628dec3a9 --- /dev/null +++ b/drivers/rtc/mx27rtc.c @@ -0,0 +1,83 @@ +/* + * Freescale i.MX27 RTC Driver + * + * Copyright (C) 2012 Philippe Reynes <tremyfr@yahoo.fr> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <rtc.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> + +#define HOUR_SHIFT 8 +#define HOUR_MASK 0x1f +#define MIN_SHIFT 0 +#define MIN_MASK 0x3f + +int rtc_get(struct rtc_time *time) +{ + struct rtc_regs *rtc_regs = (struct rtc_regs *)IMX_RTC_BASE; + uint32_t day, hour, min, sec; + + day = readl(&rtc_regs->dayr); + hour = readl(&rtc_regs->hourmin); + sec = readl(&rtc_regs->seconds); + + min = (hour >> MIN_SHIFT) & MIN_MASK; + hour = (hour >> HOUR_SHIFT) & HOUR_MASK; + + sec += min * 60 + hour * 3600 + day * 24 * 3600; + + to_tm(sec, time); + + return 0; +} + +int rtc_set(struct rtc_time *time) +{ + struct rtc_regs *rtc_regs = (struct rtc_regs *)IMX_RTC_BASE; + uint32_t day, hour, min, sec; + + sec = mktime(time->tm_year, time->tm_mon, time->tm_mday, + time->tm_hour, time->tm_min, time->tm_sec); + + day = sec / (24 * 3600); + sec = sec % (24 * 3600); + hour = sec / 3600; + sec = sec % 3600; + min = sec / 60; + sec = sec % 60; + + hour = (hour & HOUR_MASK) << HOUR_SHIFT; + hour |= (min & MIN_MASK) << MIN_SHIFT; + + writel(day, &rtc_regs->dayr); + writel(hour, &rtc_regs->hourmin); + writel(sec, &rtc_regs->seconds); + + return 0; +} + +void rtc_reset(void) +{ + struct rtc_regs *rtc_regs = (struct rtc_regs *)IMX_RTC_BASE; + + writel(0, &rtc_regs->dayr); + writel(0, &rtc_regs->hourmin); + writel(0, &rtc_regs->seconds); +} diff --git a/drivers/rtc/mxsrtc.c b/drivers/rtc/mxsrtc.c index 5beb1a0440..ffefb91881 100644 --- a/drivers/rtc/mxsrtc.c +++ b/drivers/rtc/mxsrtc.c @@ -31,7 +31,7 @@ /* Set time in seconds since 1970-01-01 */ int mxs_rtc_set_time(uint32_t secs) { - struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE; + struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE; int ret; writel(secs, &rtc_regs->hw_rtc_seconds); @@ -41,7 +41,7 @@ int mxs_rtc_set_time(uint32_t secs) * is taken from the linux kernel driver for the STMP37xx RTC since * documentation doesn't mention it. */ - ret = mx28_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg, + ret = mxs_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg, 0x80 << RTC_STAT_STALE_REGS_OFFSET, MXS_RTC_MAX_TIMEOUT); if (ret) @@ -52,7 +52,7 @@ int mxs_rtc_set_time(uint32_t secs) int rtc_get(struct rtc_time *time) { - struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE; + struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE; uint32_t secs; secs = readl(&rtc_regs->hw_rtc_seconds); @@ -73,14 +73,14 @@ int rtc_set(struct rtc_time *time) void rtc_reset(void) { - struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE; + struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE; int ret; /* Set time to 1970-01-01 */ mxs_rtc_set_time(0); /* Reset the RTC block */ - ret = mx28_reset_block(&rtc_regs->hw_rtc_ctrl_reg); + ret = mxs_reset_block(&rtc_regs->hw_rtc_ctrl_reg); if (ret) printf("MXS RTC: Block reset timeout\n"); } diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index e326b2bcff..943ef70fa6 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -49,17 +49,26 @@ int serial_init(void) { atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; + /* + * Just in case: drain transmitter register + * 1000us is enough for baudrate >= 9600 + */ + if (!(readl(&usart->csr) & USART3_BIT(TXEMPTY))) + __udelay(1000); + writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr); serial_setbrg(); - writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) | USART3_BF(USCLKS, USART3_USCLKS_MCK) | USART3_BF(CHRL, USART3_CHRL_8) | USART3_BF(PAR, USART3_PAR_NONE) | USART3_BF(NBSTOP, USART3_NBSTOP_1)), &usart->mr); + writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); + /* 100us is enough for the new settings to be settled */ + __udelay(100); return 0; } diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 0c23955318..facadd2f5c 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -52,7 +52,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); serial_out(UART_LCRVAL, &com_port->lcr); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ - defined(CONFIG_AM33XX) + defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) #if defined(CONFIG_APTIX) /* /13 mode so Aptix 6MHz can hit 115200 */ diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 0d6ad6283a..b10bab70d0 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -84,9 +84,6 @@ static NS16550_t serial_ports[4] = { }; #define PORT serial_ports[port-1] -#if defined(CONFIG_CONS_INDEX) -#define CONSOLE (serial_ports[CONFIG_CONS_INDEX-1]) -#endif #if defined(CONFIG_SERIAL_MULTI) diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index ed581ae22b..d4c5137092 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -156,6 +156,8 @@ int serial_init (void) writel(lcr, ®s->fr); writel(lcr, ®s->pl011_rlcr); + /* lcrh needs to be set again for change to be effective */ + writel(lcr, ®s->pl011_lcrh); } #endif /* Finally, enable the UART */ diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 83ef8e8b19..c7a51f7f39 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -92,6 +92,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, as->slave.cs = cs; as->regs = regs; as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS +#if defined(CONFIG_AT91SAM9X5) + | ATMEL_SPI_MR_WDRBT +#endif | ATMEL_SPI_MR_PCS(~(1 << cs) & 0xf); spi_writel(as, CSR(cs), csrx); diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h index 8b69a6d215..057de9adee 100644 --- a/drivers/spi/atmel_spi.h +++ b/drivers/spi/atmel_spi.h @@ -26,6 +26,7 @@ #define ATMEL_SPI_MR_PCSDEC (1 << 2) #define ATMEL_SPI_MR_FDIV (1 << 3) #define ATMEL_SPI_MR_MODFDIS (1 << 4) +#define ATMEL_SPI_MR_WDRBT (1 << 5) #define ATMEL_SPI_MR_LLB (1 << 7) #define ATMEL_SPI_MR_PCS(x) (((x) & 15) << 16) #define ATMEL_SPI_MR_DLYBCS(x) ((x) << 24) diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 2e1531858d..13bebe8ac1 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -96,7 +96,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, clk_src = mxc_get_clock(MXC_CSPI_CLK); - div = clk_src / max_hz; + div = DIV_ROUND_UP(clk_src, max_hz); div = get_cspi_div(div); debug("clk %d Hz, div %d, real clk %d Hz\n", @@ -147,7 +147,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, * The following computation is taken directly from Freescale's code. */ if (clk_src > max_hz) { - pre_div = clk_src / max_hz; + pre_div = DIV_ROUND_UP(clk_src, max_hz); if (pre_div > 16) { post_div = pre_div / 16; pre_div = 15; @@ -408,7 +408,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (bus >= ARRAY_SIZE(spi_bases)) return NULL; - mxcs = malloc(sizeof(struct mxc_spi_slave)); + mxcs = calloc(sizeof(struct mxc_spi_slave), 1); if (!mxcs) { puts("mxc_spi: SPI Slave not allocated !\n"); return NULL; diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index 7859536a67..168dbe497e 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -31,17 +31,31 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/dma.h> #define MXS_SPI_MAX_TIMEOUT 1000000 #define MXS_SPI_PORT_OFFSET 0x2000 #define MXS_SSP_CHIPSELECT_MASK 0x00300000 #define MXS_SSP_CHIPSELECT_SHIFT 20 +#define MXSSSP_SMALL_TRANSFER 512 + +/* + * CONFIG_MXS_SPI_DMA_ENABLE: Experimental mixed PIO/DMA support for MXS SPI + * host. Use with utmost caution! + * + * Enabling this is not yet recommended since this + * still doesn't support transfers to/from unaligned + * addresses. Therefore this driver will not work + * for example with saving environment. This is + * caused by DMA alignment constraints on MXS. + */ + struct mxs_spi_slave { struct spi_slave slave; uint32_t max_khz; uint32_t mode; - struct mx28_ssp_regs *regs; + struct mxs_ssp_regs *regs; }; static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave) @@ -67,7 +81,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, { struct mxs_spi_slave *mxs_slave; uint32_t addr; - struct mx28_ssp_regs *ssp_regs; + struct mxs_ssp_regs *ssp_regs; int reg; if (!spi_cs_is_valid(bus, cs)) { @@ -75,17 +89,20 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, return NULL; } - mxs_slave = malloc(sizeof(struct mxs_spi_slave)); + mxs_slave = calloc(sizeof(struct mxs_spi_slave), 1); if (!mxs_slave) return NULL; + if (mxs_dma_init_channel(bus)) + goto err_init; + addr = MXS_SSP0_BASE + (bus * MXS_SPI_PORT_OFFSET); mxs_slave->slave.bus = bus; mxs_slave->slave.cs = cs; mxs_slave->max_khz = max_hz / 1000; mxs_slave->mode = mode; - mxs_slave->regs = (struct mx28_ssp_regs *)addr; + mxs_slave->regs = (struct mxs_ssp_regs *)addr; ssp_regs = mxs_slave->regs; reg = readl(&ssp_regs->hw_ssp_ctrl0); @@ -94,6 +111,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, writel(reg, &ssp_regs->hw_ssp_ctrl0); return &mxs_slave->slave; + +err_init: + free(mxs_slave); + return NULL; } void spi_free_slave(struct spi_slave *slave) @@ -105,10 +126,10 @@ void spi_free_slave(struct spi_slave *slave) int spi_claim_bus(struct spi_slave *slave) { struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); - struct mx28_ssp_regs *ssp_regs = mxs_slave->regs; + struct mxs_ssp_regs *ssp_regs = mxs_slave->regs; uint32_t reg = 0; - mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); + mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0); @@ -128,79 +149,63 @@ void spi_release_bus(struct spi_slave *slave) { } -static void mxs_spi_start_xfer(struct mx28_ssp_regs *ssp_regs) +static void mxs_spi_start_xfer(struct mxs_ssp_regs *ssp_regs) { writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set); writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr); } -static void mxs_spi_end_xfer(struct mx28_ssp_regs *ssp_regs) +static void mxs_spi_end_xfer(struct mxs_ssp_regs *ssp_regs) { writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr); writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set); } -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) +static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave, + char *data, int length, int write, unsigned long flags) { - struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); - struct mx28_ssp_regs *ssp_regs = mxs_slave->regs; - int len = bitlen / 8; - const char *tx = dout; - char *rx = din; - char dummy; - - if (bitlen == 0) { - if (flags & SPI_XFER_END) { - rx = &dummy; - len = 1; - } else - return 0; - } - - if (!rx && !tx) - return 0; + struct mxs_ssp_regs *ssp_regs = slave->regs; if (flags & SPI_XFER_BEGIN) mxs_spi_start_xfer(ssp_regs); - while (len--) { + while (length--) { /* We transfer 1 byte */ writel(1, &ssp_regs->hw_ssp_xfer_size); - if ((flags & SPI_XFER_END) && !len) + if ((flags & SPI_XFER_END) && !length) mxs_spi_end_xfer(ssp_regs); - if (tx) + if (write) writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr); else writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set); writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set); - if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg, + if (mxs_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg, SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { printf("MXS SPI: Timeout waiting for start\n"); return -ETIMEDOUT; } - if (tx) - writel(*tx++, &ssp_regs->hw_ssp_data); + if (write) + writel(*data++, &ssp_regs->hw_ssp_data); writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set); - if (rx) { - if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg, + if (!write) { + if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_status_reg, SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) { printf("MXS SPI: Timeout waiting for data\n"); return -ETIMEDOUT; } - *rx = readl(&ssp_regs->hw_ssp_data); - rx++; + *data = readl(&ssp_regs->hw_ssp_data); + data++; } - if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg, + if (mxs_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg, SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { printf("MXS SPI: Timeout waiting for finish\n"); return -ETIMEDOUT; @@ -209,3 +214,166 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, return 0; } + +static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, + char *data, int length, int write, unsigned long flags) +{ + const int xfer_max_sz = 0xff00; + const int desc_count = DIV_ROUND_UP(length, xfer_max_sz) + 1; + struct mxs_ssp_regs *ssp_regs = slave->regs; + struct mxs_dma_desc *dp; + uint32_t ctrl0; + uint32_t cache_data_count; + int dmach; + int tl; + + ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count); + + memset(desc, 0, sizeof(struct mxs_dma_desc) * desc_count); + + ctrl0 = readl(&ssp_regs->hw_ssp_ctrl0); + ctrl0 |= SSP_CTRL0_DATA_XFER; + + if (flags & SPI_XFER_BEGIN) + ctrl0 |= SSP_CTRL0_LOCK_CS; + if (!write) + ctrl0 |= SSP_CTRL0_READ; + + writel(length, &ssp_regs->hw_ssp_xfer_size); + + if (length % ARCH_DMA_MINALIGN) + cache_data_count = roundup(length, ARCH_DMA_MINALIGN); + else + cache_data_count = length; + + if (write) + /* Flush data to DRAM so DMA can pick them up */ + flush_dcache_range((uint32_t)data, + (uint32_t)(data + cache_data_count)); + + dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + slave->slave.bus; + + dp = desc; + while (length) { + dp->address = (dma_addr_t)dp; + dp->cmd.address = (dma_addr_t)data; + + /* + * This is correct, even though it does indeed look insane. + * I hereby have to, wholeheartedly, thank Freescale Inc., + * for always inventing insane hardware and keeping me busy + * and employed ;-) + */ + if (write) + dp->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ; + else + dp->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE; + + /* + * The DMA controller can transfer large chunks (64kB) at + * time by setting the transfer length to 0. Setting tl to + * 0x10000 will overflow below and make .data contain 0. + * Otherwise, 0xff00 is the transfer maximum. + */ + if (length >= 0x10000) + tl = 0x10000; + else + tl = min(length, xfer_max_sz); + + dp->cmd.data |= + (tl << MXS_DMA_DESC_BYTES_OFFSET) | + (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | + MXS_DMA_DESC_HALT_ON_TERMINATE | + MXS_DMA_DESC_TERMINATE_FLUSH; + dp->cmd.pio_words[0] = ctrl0; + + data += tl; + length -= tl; + + mxs_dma_desc_append(dmach, dp); + + dp++; + } + + dp->address = (dma_addr_t)dp; + dp->cmd.address = (dma_addr_t)0; + dp->cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER | + (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | + MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM; + if (flags & SPI_XFER_END) { + ctrl0 &= ~SSP_CTRL0_LOCK_CS; + dp->cmd.pio_words[0] = ctrl0 | SSP_CTRL0_IGNORE_CRC; + } + mxs_dma_desc_append(dmach, dp); + + if (mxs_dma_go(dmach)) + return -EINVAL; + + /* The data arrived into DRAM, invalidate cache over them */ + if (!write) { + invalidate_dcache_range((uint32_t)data, + (uint32_t)(data + cache_data_count)); + } + + return 0; +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); + struct mxs_ssp_regs *ssp_regs = mxs_slave->regs; + int len = bitlen / 8; + char dummy; + int write = 0; + char *data = NULL; + +#ifdef CONFIG_MXS_SPI_DMA_ENABLE + int dma = 1; +#else + int dma = 0; +#endif + + if (bitlen == 0) { + if (flags & SPI_XFER_END) { + din = (void *)&dummy; + len = 1; + } else + return 0; + } + + /* Half-duplex only */ + if (din && dout) + return -EINVAL; + /* No data */ + if (!din && !dout) + return 0; + + if (dout) { + data = (char *)dout; + write = 1; + } else if (din) { + data = (char *)din; + write = 0; + } + + /* + * Check for alignment, if the buffer is aligned, do DMA transfer, + * PIO otherwise. This is a temporary workaround until proper bounce + * buffer is in place. + */ + if (dma) { + if (((uint32_t)data) & (ARCH_DMA_MINALIGN - 1)) + dma = 0; + if (((uint32_t)len) & (ARCH_DMA_MINALIGN - 1)) + dma = 0; + } + + if (!dma || (len < MXSSSP_SMALL_TRANSFER)) { + writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr); + return mxs_spi_xfer_pio(mxs_slave, data, len, write, flags); + } else { + writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set); + return mxs_spi_xfer_dma(mxs_slave, data, len, write, flags); + } +} diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c index 9346c0b5b4..e40a632caa 100644 --- a/drivers/spi/omap3_spi.c +++ b/drivers/spi/omap3_spi.c @@ -86,15 +86,21 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, case 0: ds->regs = (struct mcspi *)OMAP3_MCSPI1_BASE; break; +#ifdef OMAP3_MCSPI2_BASE case 1: ds->regs = (struct mcspi *)OMAP3_MCSPI2_BASE; break; +#endif +#ifdef OMAP3_MCSPI3_BASE case 2: ds->regs = (struct mcspi *)OMAP3_MCSPI3_BASE; break; +#endif +#ifdef OMAP3_MCSPI4_BASE case 3: ds->regs = (struct mcspi *)OMAP3_MCSPI4_BASE; break; +#endif default: printf("SPI error: unsupported bus %i. \ Supported busses 0 - 3\n", bus); @@ -167,8 +173,18 @@ int spi_claim_bus(struct spi_slave *slave) /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS * REVISIT: this controller could support SPI_3WIRE mode. */ +#ifdef CONFIG_AM33XX + /* + * The reference design on AM33xx has D0 and D1 wired up opposite + * of how it has been done on previous platforms. We assume that + * custom hardware will also follow this convention. + */ + conf &= OMAP3_MCSPI_CHCONF_DPE0; + conf |= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1); +#else conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1); conf |= OMAP3_MCSPI_CHCONF_DPE0; +#endif /* wordlength */ conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK; diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h index 0ac801cb25..bffa43cb6c 100644 --- a/drivers/spi/omap3_spi.h +++ b/drivers/spi/omap3_spi.h @@ -30,10 +30,15 @@ #ifndef _OMAP3_SPI_H_ #define _OMAP3_SPI_H_ +#ifdef CONFIG_AM33XX +#define OMAP3_MCSPI1_BASE 0x48030100 +#define OMAP3_MCSPI2_BASE 0x481A0100 +#else #define OMAP3_MCSPI1_BASE 0x48098000 #define OMAP3_MCSPI2_BASE 0x4809A000 #define OMAP3_MCSPI3_BASE 0x480B8000 #define OMAP3_MCSPI4_BASE 0x480BA000 +#endif #define OMAP3_MCSPI_MAX_FREQ 48000000 diff --git a/drivers/spi/tegra_spi.c b/drivers/spi/tegra_spi.c index 4a3e7996f9..2355e022b0 100644 --- a/drivers/spi/tegra_spi.c +++ b/drivers/spi/tegra_spi.c @@ -54,7 +54,7 @@ static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave) int spi_cs_is_valid(unsigned int bus, unsigned int cs) { - /* Tegra2 SPI-Flash - only 1 device ('bus/cs') */ + /* Tegra20 SPI-Flash - only 1 device ('bus/cs') */ if (bus != 0 || cs != 0) return 0; else @@ -72,9 +72,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, return NULL; } - if (max_hz > TEGRA2_SPI_MAX_FREQ) { + if (max_hz > TEGRA20_SPI_MAX_FREQ) { printf("SPI error: unsupported frequency %d Hz. Max frequency" - " is %d Hz\n", max_hz, TEGRA2_SPI_MAX_FREQ); + " is %d Hz\n", max_hz, TEGRA20_SPI_MAX_FREQ); return NULL; } @@ -86,7 +86,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, spi->slave.bus = bus; spi->slave.cs = cs; spi->freq = max_hz; - spi->regs = (struct spi_tegra *)TEGRA2_SPI_BASE; + spi->regs = (struct spi_tegra *)TEGRA20_SPI_BASE; spi->mode = mode; return &spi->slave; @@ -130,7 +130,7 @@ int spi_claim_bus(struct spi_slave *slave) debug("spi_init: COMMAND = %08x\n", readl(®s->command)); /* - * SPI pins on Tegra2 are muxed - change pinmux later due to UART + * SPI pins on Tegra20 are muxed - change pinmux later due to UART * issue. */ pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH); diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 6de91640d6..bcb4662c47 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -28,6 +28,7 @@ LIB := $(obj)libusb_host.o # ohci COBJS-$(CONFIG_USB_OHCI_NEW) += ohci-hcd.o COBJS-$(CONFIG_USB_ATMEL) += ohci-at91.o +COBJS-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o COBJS-$(CONFIG_USB_S3C64XX) += s3c64xx-hcd.o diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c index e1bd37ec8d..6e21669d5a 100644 --- a/drivers/usb/host/ehci-mxs.c +++ b/drivers/usb/host/ehci-mxs.c @@ -23,7 +23,7 @@ #include <asm/io.h> #include <asm/arch/regs-common.h> #include <asm/arch/regs-base.h> -#include <asm/arch/regs-clkctrl.h> +#include <asm/arch/regs-clkctrl-mx28.h> #include <asm/arch/regs-usb.h> #include <asm/arch/regs-usbphy.h> @@ -39,8 +39,8 @@ #endif static struct ehci_mxs { - struct mx28_usb_regs *usb_regs; - struct mx28_usbphy_regs *phy_regs; + struct mxs_usb_regs *usb_regs; + struct mxs_usbphy_regs *phy_regs; } ehci_mxs; int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port) @@ -60,8 +60,8 @@ int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port) return -1; } - mxs_usb->usb_regs = (struct mx28_usb_regs *)usb_base; - mxs_usb->phy_regs = (struct mx28_usbphy_regs *)phy_base; + mxs_usb->usb_regs = (struct mxs_usb_regs *)usb_base; + mxs_usb->phy_regs = (struct mxs_usbphy_regs *)phy_base; return 0; } @@ -75,10 +75,10 @@ int ehci_hcd_init(void) int ret; uint32_t usb_base, cap_base; - struct mx28_register_32 *digctl_ctrl = - (struct mx28_register_32 *)HW_DIGCTL_CTRL; - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_register_32 *digctl_ctrl = + (struct mxs_register_32 *)HW_DIGCTL_CTRL; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT); if (ret) @@ -119,10 +119,10 @@ int ehci_hcd_stop(void) { int ret; uint32_t tmp; - struct mx28_register_32 *digctl_ctrl = - (struct mx28_register_32 *)HW_DIGCTL_CTRL; - struct mx28_clkctrl_regs *clkctrl_regs = - (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct mxs_register_32 *digctl_ctrl = + (struct mxs_register_32 *)HW_DIGCTL_CTRL; + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT); if (ret) diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c new file mode 100644 index 0000000000..f0ccb83f7a --- /dev/null +++ b/drivers/usb/host/ohci-da8xx.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Sughosh Ganu <urwithsughosh@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> + +#include <asm/arch/da8xx-usb.h> + +int usb_cpu_init(void) +{ + /* enable psc for usb2.0 */ + lpsc_on(DAVINCI_LPSC_USB20); + + /* enable psc for usb1.0 */ + lpsc_on(DAVINCI_LPSC_USB11); + + /* start the on-chip usb phy and its pll */ + if (usb_phy_on()) + return 0; + + return 1; +} + +int usb_cpu_stop(void) +{ + usb_phy_off(); + + /* turn off the usb clock and assert the module reset */ + lpsc_disable(DAVINCI_LPSC_USB11); + lpsc_disable(DAVINCI_LPSC_USB20); + + return 0; +} + +int usb_cpu_init_fail(void) +{ + return usb_cpu_stop(); +} diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 617d88e1a7..653410a573 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -23,7 +23,8 @@ */ #include <common.h> -#include "da8xx.h" +#include "musb_core.h" +#include <asm/arch/da8xx-usb.h> /* MUSB platform configuration */ struct musb_config musb_cfg = { diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 2f8e2b521a..ebb6da823c 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -29,9 +29,11 @@ COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o videomodes.o COBJS-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o +COBJS-$(CONFIG_EXYNOS_DP) += exynos_dp.o exynos_dp_lowlevel.o COBJS-$(CONFIG_EXYNOS_FB) += exynos_fb.o exynos_fimd.o COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \ exynos_mipi_dsi_lowlevel.o +COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o COBJS-$(CONFIG_S6E63D6) += s6e63d6.o diff --git a/drivers/video/exynos_dp.c b/drivers/video/exynos_dp.c new file mode 100644 index 0000000000..53e410120a --- /dev/null +++ b/drivers/video/exynos_dp.c @@ -0,0 +1,925 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <malloc.h> +#include <linux/err.h> +#include <asm/arch/clk.h> +#include <asm/arch/cpu.h> +#include <asm/arch/dp_info.h> +#include <asm/arch/dp.h> + +#include "exynos_dp_lowlevel.h" + +static struct exynos_dp_platform_data *dp_pd; + +static void exynos_dp_disp_info(struct edp_disp_info *disp_info) +{ + disp_info->h_total = disp_info->h_res + disp_info->h_sync_width + + disp_info->h_back_porch + disp_info->h_front_porch; + disp_info->v_total = disp_info->v_res + disp_info->v_sync_width + + disp_info->v_back_porch + disp_info->v_front_porch; + + return; +} + +static int exynos_dp_init_dp(void) +{ + int ret; + exynos_dp_reset(); + + /* SW defined function Normal operation */ + exynos_dp_enable_sw_func(DP_ENABLE); + + ret = exynos_dp_init_analog_func(); + if (ret != EXYNOS_DP_SUCCESS) + return ret; + + exynos_dp_init_hpd(); + exynos_dp_init_aux(); + + return ret; +} + +static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data) +{ + int i; + unsigned char sum = 0; + + for (i = 0; i < EDID_BLOCK_LENGTH; i++) + sum = sum + edid_data[i]; + + return sum; +} + +static unsigned int exynos_dp_read_edid(void) +{ + unsigned char edid[EDID_BLOCK_LENGTH * 2]; + unsigned int extend_block = 0; + unsigned char sum; + unsigned char test_vector; + int retval; + + /* + * EDID device address is 0x50. + * However, if necessary, you must have set upper address + * into E-EDID in I2C device, 0x30. + */ + + /* Read Extension Flag, Number of 128-byte EDID extension blocks */ + exynos_dp_read_byte_from_i2c(I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG, + &extend_block); + + if (extend_block > 0) { + printf("DP EDID data includes a single extension!\n"); + + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + if (retval != 0) { + printf("DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + printf("DP EDID bad checksum!\n"); + return -1; + } + + /* Read additional EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_BLOCK_LENGTH, + EDID_BLOCK_LENGTH, + &edid[EDID_BLOCK_LENGTH]); + if (retval != 0) { + printf("DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]); + if (sum != 0) { + printf("DP EDID bad checksum!\n"); + return -1; + } + + exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, + edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + } else { + debug("DP EDID data does not include any extensions.\n"); + + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + + if (retval != 0) { + printf("DP EDID Read failed!\n"); + return -1; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + printf("DP EDID bad checksum!\n"); + return -1; + } + + exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM, + edid[EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + } + + debug("DP EDID Read success!\n"); + + return 0; +} + +static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info) +{ + unsigned char buf[12]; + unsigned int ret; + unsigned char temp; + unsigned char retry_cnt; + unsigned char dpcd_rev[16]; + unsigned char lane_bw[16]; + unsigned char lane_cnt[16]; + + memset(dpcd_rev, 0, 16); + memset(lane_bw, 0, 16); + memset(lane_cnt, 0, 16); + memset(buf, 0, 12); + + retry_cnt = 5; + while (retry_cnt) { + /* Read DPCD 0x0000-0x000b */ + ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12, + buf); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP read_byte_from_dpcd() failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + + /* */ + temp = buf[DPCD_DPCD_REV]; + if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11) + edp_info->dpcd_rev = temp; + else { + printf("DP Wrong DPCD Rev : %x\n", temp); + return -ENODEV; + } + + temp = buf[DPCD_MAX_LINK_RATE]; + if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70) + edp_info->lane_bw = temp; + else { + printf("DP Wrong MAX LINK RATE : %x\n", temp); + return -EINVAL; + } + + /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */ + if (edp_info->dpcd_rev == DP_DPCD_REV_11) { + temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f; + if (buf[DPCD_MAX_LANE_COUNT] & 0x80) + edp_info->dpcd_efc = 1; + else + edp_info->dpcd_efc = 0; + } else { + temp = buf[DPCD_MAX_LANE_COUNT]; + edp_info->dpcd_efc = 0; + } + + if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 || + temp == DP_LANE_CNT_4) { + edp_info->lane_cnt = temp; + } else { + printf("DP Wrong MAX LANE COUNT : %x\n", temp); + return -EINVAL; + } + + ret = exynos_dp_read_edid(); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP exynos_dp_read_edid() failed\n"); + return -EINVAL; + } + + return ret; +} + +static void exynos_dp_init_training(void) +{ + /* + * MACRO_RST must be applied after the PLL_LOCK to avoid + * the DP inter pair skew issue for at least 10 us + */ + exynos_dp_reset_macro(); + + /* All DP analog module power up */ + exynos_dp_set_analog_power_down(POWER_ALL, 0); +} + +static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info) +{ + unsigned char buf[5]; + unsigned int ret = 0; + + debug("DP: %s was called\n", __func__); + + edp_info->lt_info.lt_status = DP_LT_CR; + edp_info->lt_info.ep_loop = 0; + edp_info->lt_info.cr_loop[0] = 0; + edp_info->lt_info.cr_loop[1] = 0; + edp_info->lt_info.cr_loop[2] = 0; + edp_info->lt_info.cr_loop[3] = 0; + + /* Set sink to D0 (Sink Not Ready) mode. */ + ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE, + DPCD_SET_POWER_STATE_D0); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write_dpcd_byte failed\n"); + return ret; + } + + /* Set link rate and count as you want to establish*/ + exynos_dp_set_link_bandwidth(edp_info->lane_bw); + exynos_dp_set_lane_count(edp_info->lane_cnt); + + /* Setup RX configuration */ + buf[0] = edp_info->lane_bw; + buf[1] = edp_info->lane_cnt; + + ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2, + buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write_dpcd_byte failed\n"); + return ret; + } + + exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0, + edp_info->lane_cnt); + + /* Set training pattern 1 */ + exynos_dp_set_training_pattern(TRAINING_PTN1); + + /* Set RX training pattern */ + buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1; + + buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 | + DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0; + + ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET, + 5, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write_dpcd_byte failed\n"); + return ret; + } + + return ret; +} + +static unsigned int exynos_dp_training_pattern_dis(void) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + + exynos_dp_set_training_pattern(DP_NONE); + + ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + DPCD_TRAINING_PATTERN_DISABLED); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP requst_link_traninig_req failed\n"); + return -EAGAIN; + } + + return ret; +} + +static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable) +{ + unsigned char data; + unsigned int ret = EXYNOS_DP_SUCCESS; + + ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET, + &data); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read_from_dpcd failed\n"); + return -EAGAIN; + } + + if (enable) + data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data); + else + data = DPCD_LN_COUNT_SET(data); + + ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET, + data); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write_to_dpcd failed\n"); + return -EAGAIN; + + } + + return ret; +} + +static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + + ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP rx_enhance_mode failed\n"); + return -EAGAIN; + } + + exynos_dp_enable_enhanced_mode(enhance_mode); + + return ret; +} + +static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info, + unsigned char *status) +{ + unsigned int ret, i; + unsigned char buf[2]; + unsigned char lane_stat[DP_LANE_CNT_4] = {0,}; + unsigned char shift_val[DP_LANE_CNT_4] = {0,}; + + shift_val[0] = 0; + shift_val[1] = 4; + shift_val[2] = 0; + shift_val[3] = 4; + + ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read lane status failed\n"); + return ret; + } + + for (i = 0; i < edp_info->lane_cnt; i++) { + lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f; + if (lane_stat[0] != lane_stat[i]) { + printf("Wrong lane status\n"); + return -EINVAL; + } + } + + *status = lane_stat[0]; + + return ret; +} + +static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num, + unsigned char *sw, unsigned char *em) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + unsigned char buf; + unsigned int dpcd_addr; + unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4}; + + /*lane_num value is used as arry index, so this range 0 ~ 3 */ + dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2); + + ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read adjust request failed\n"); + return -EAGAIN; + } + + *sw = ((buf >> shift_val[lane_num]) & 0x03); + *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2; + + return ret; +} + +static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info) +{ + int ret; + + ret = exynos_dp_training_pattern_dis(); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP training_patter_disable() failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP set_enhanced_mode() failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + return ret; +} + +static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info) +{ + int ret; + + if (edp_info->lane_bw == DP_LANE_BW_2_70) { + edp_info->lane_bw = DP_LANE_BW_1_62; + printf("DP Change lane bw to 1.62Gbps\n"); + edp_info->lt_info.lt_status = DP_LT_START; + ret = EXYNOS_DP_SUCCESS; + } else { + ret = exynos_dp_training_pattern_dis(); + if (ret != EXYNOS_DP_SUCCESS) + printf("DP training_patter_disable() failed\n"); + + ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc); + if (ret != EXYNOS_DP_SUCCESS) + printf("DP set_enhanced_mode() failed\n"); + + edp_info->lt_info.lt_status = DP_LT_FAIL; + } + + return ret; +} + +static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info + *edp_info) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + unsigned char lane_stat; + unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, }; + unsigned int i; + unsigned char adj_req_sw; + unsigned char adj_req_em; + unsigned char buf[5]; + + debug("DP: %s was called\n", __func__); + mdelay(1); + + ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read lane status failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + if (lane_stat & DP_LANE_STAT_CR_DONE) { + debug("DP clock Recovery training succeed\n"); + exynos_dp_set_training_pattern(TRAINING_PTN2); + + for (i = 0; i < edp_info->lane_cnt; i++) { + ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw, + &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) + || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | + MAX_PRE_EMPHASIS_REACH_3; + } + exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); + } + + buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2; + buf[1] = lt_ctl_val[0]; + buf[2] = lt_ctl_val[1]; + buf[3] = lt_ctl_val[2]; + buf[4] = lt_ctl_val[3]; + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_PATTERN_SET, 5, buf); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write traning pattern1 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } else + edp_info->lt_info.lt_status = DP_LT_ET; + } else { + for (i = 0; i < edp_info->lane_cnt; i++) { + lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i); + ret = exynos_dp_read_dpcd_adj_req(i, + &adj_req_sw, &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read adj req failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) + ret = exynos_dp_reduce_link_rate(edp_info); + + if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) == + adj_req_sw) && + (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) == + adj_req_em)) { + edp_info->lt_info.cr_loop[i]++; + if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP) + ret = exynos_dp_reduce_link_rate( + edp_info); + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 | + MAX_PRE_EMPHASIS_REACH_3; + } + exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i); + } + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP write traning pattern2 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + } + + return ret; +} + +static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info + *edp_info) +{ + unsigned int ret = EXYNOS_DP_SUCCESS; + unsigned char lane_stat, adj_req_sw, adj_req_em, i; + unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,}; + unsigned char interlane_aligned = 0; + unsigned char f_bw; + unsigned char f_lane_cnt; + unsigned char sink_stat; + + mdelay(1); + + ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read lane status failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + return ret; + } + + debug("DP lane stat : %x\n", lane_stat); + + if (lane_stat & DP_LANE_STAT_CR_DONE) { + ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED, + &sink_stat); + if (ret != EXYNOS_DP_SUCCESS) { + edp_info->lt_info.lt_status = DP_LT_FAIL; + + return ret; + } + + interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE); + + for (i = 0; i < edp_info->lane_cnt; i++) { + ret = exynos_dp_read_dpcd_adj_req(i, + &adj_req_sw, &adj_req_em); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP read adj req 1 failed\n"); + edp_info->lt_info.lt_status = DP_LT_FAIL; + + return ret; + } + + lt_ctl_val[i] = 0; + lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw; + + if ((adj_req_sw == VOLTAGE_LEVEL_3) || + (adj_req_em == PRE_EMPHASIS_LEVEL_3)) { + lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3; + lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3; + } + } + + if (((lane_stat&DP_LANE_STAT_CE_DONE) && + (lane_stat&DP_LANE_STAT_SYM_LOCK)) + && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) { + debug("DP Equalizer training succeed\n"); + + f_bw = exynos_dp_get_link_bandwidth(); + f_lane_cnt = exynos_dp_get_lane_count(); + + debug("DP final BandWidth : %x\n", f_bw); + debug("DP final Lane Count : %x\n", f_lane_cnt); + + edp_info->lt_info.lt_status = DP_LT_FINISHED; + + exynos_dp_equalizer_err_link(edp_info); + + } else { + edp_info->lt_info.ep_loop++; + + if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) { + if (edp_info->lane_bw == DP_LANE_BW_2_70) { + ret = exynos_dp_reduce_link_rate( + edp_info); + } else { + edp_info->lt_info.lt_status = + DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + } else { + for (i = 0; i < edp_info->lane_cnt; i++) + exynos_dp_set_lanex_pre_emphasis( + lt_ctl_val[i], i); + + ret = exynos_dp_write_bytes_to_dpcd( + DPCD_TRAINING_LANE0_SET, + 4, lt_ctl_val); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP set lt pattern failed\n"); + edp_info->lt_info.lt_status = + DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + } + } + } else if (edp_info->lane_bw == DP_LANE_BW_2_70) { + ret = exynos_dp_reduce_link_rate(edp_info); + } else { + edp_info->lt_info.lt_status = DP_LT_FAIL; + exynos_dp_equalizer_err_link(edp_info); + } + + return ret; +} + +static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info) +{ + unsigned int ret = 0; + int training_finished; + + /* Turn off unnecessary lane */ + if (edp_info->lane_cnt == 1) + exynos_dp_set_analog_power_down(CH1_BLOCK, 1); + + training_finished = 0; + + edp_info->lt_info.lt_status = DP_LT_START; + + /* Process here */ + while (!training_finished) { + switch (edp_info->lt_info.lt_status) { + case DP_LT_START: + ret = exynos_dp_link_start(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP LT:link start failed\n"); + return ret; + } + break; + case DP_LT_CR: + ret = exynos_dp_process_clock_recovery(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP LT:clock recovery failed\n"); + return ret; + } + break; + case DP_LT_ET: + ret = exynos_dp_process_equalizer_training(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP LT:equalizer training failed\n"); + return ret; + } + break; + case DP_LT_FINISHED: + training_finished = 1; + break; + case DP_LT_FAIL: + return -1; + } + } + + return ret; +} + +static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info) +{ + unsigned int ret; + + exynos_dp_init_training(); + + ret = exynos_dp_sw_link_training(edp_info); + if (ret != EXYNOS_DP_SUCCESS) + printf("DP dp_sw_link_traning() failed\n"); + + return ret; +} + +static void exynos_dp_enable_scramble(unsigned int enable) +{ + unsigned char data; + + if (enable) { + exynos_dp_enable_scrambling(DP_ENABLE); + + exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, + &data); + exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + (u8)(data & ~DPCD_SCRAMBLING_DISABLED)); + } else { + exynos_dp_enable_scrambling(DP_DISABLE); + exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET, + &data); + exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET, + (u8)(data | DPCD_SCRAMBLING_DISABLED)); + } +} + +static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info) +{ + unsigned int ret = 0; + unsigned int retry_cnt; + + mdelay(1); + + if (edp_info->video_info.master_mode) { + printf("DP does not support master mode\n"); + return -ENODEV; + } else { + /* debug slave */ + exynos_dp_config_video_slave_mode(&edp_info->video_info); + } + + exynos_dp_set_video_color_format(&edp_info->video_info); + + if (edp_info->video_info.bist_mode) { + if (exynos_dp_config_video_bist(edp_info) != 0) + return -1; + } + + ret = exynos_dp_get_pll_lock_status(); + if (ret != PLL_LOCKED) { + printf("DP PLL is not locked yet\n"); + return -EIO; + } + + if (edp_info->video_info.master_mode == 0) { + retry_cnt = 10; + while (retry_cnt) { + ret = exynos_dp_is_slave_video_stream_clock_on(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP stream_clock_on failed\n"); + return ret; + } + retry_cnt--; + mdelay(1); + } else + break; + } + } + + /* Set to use the register calculated M/N video */ + exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0); + + /* For video bist, Video timing must be generated by register */ + exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE); + + /* Enable video bist */ + if (edp_info->video_info.bist_pattern != COLOR_RAMP && + edp_info->video_info.bist_pattern != BALCK_WHITE_V_LINES && + edp_info->video_info.bist_pattern != COLOR_SQUARE) + exynos_dp_enable_video_bist(edp_info->video_info.bist_mode); + else + exynos_dp_enable_video_bist(DP_DISABLE); + + /* Disable video mute */ + exynos_dp_enable_video_mute(DP_DISABLE); + + /* Configure video Master or Slave mode */ + exynos_dp_enable_video_master(edp_info->video_info.master_mode); + + /* Enable video */ + exynos_dp_start_video(); + + if (edp_info->video_info.master_mode == 0) { + retry_cnt = 100; + while (retry_cnt) { + ret = exynos_dp_is_video_stream_on(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP Timeout of video stream\n"); + return ret; + } + retry_cnt--; + mdelay(5); + } else + break; + } + } + + return ret; +} + +unsigned int exynos_init_dp(void) +{ + unsigned int ret; + struct edp_device_info *edp_info; + struct edp_disp_info disp_info; + + edp_info = kzalloc(sizeof(struct edp_device_info), GFP_KERNEL); + if (!edp_info) { + debug("failed to allocate edp device object.\n"); + return -EFAULT; + } + + edp_info = dp_pd->edp_dev_info; + if (edp_info == NULL) { + debug("failed to get edp_info data.\n"); + return -EFAULT; + } + disp_info = edp_info->disp_info; + + exynos_dp_disp_info(&edp_info->disp_info); + + if (dp_pd->phy_enable) + dp_pd->phy_enable(1); + + ret = exynos_dp_init_dp(); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP exynos_dp_init_dp() failed\n"); + return ret; + } + + ret = exynos_dp_handle_edid(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("EDP handle_edid fail\n"); + return ret; + } + + ret = exynos_dp_set_link_train(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP link training fail\n"); + return ret; + } + + exynos_dp_enable_scramble(DP_ENABLE); + exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE); + exynos_dp_enable_enhanced_mode(DP_ENABLE); + + exynos_dp_set_link_bandwidth(edp_info->lane_bw); + exynos_dp_set_lane_count(edp_info->lane_cnt); + + exynos_dp_init_video(); + ret = exynos_dp_config_video(edp_info); + if (ret != EXYNOS_DP_SUCCESS) { + printf("Exynos DP init failed\n"); + return ret; + } + + printf("Exynos DP init done\n"); + + return ret; +} + +void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd) +{ + if (pd == NULL) { + debug("pd is NULL\n"); + return; + } + + dp_pd = pd; +} diff --git a/drivers/video/exynos_dp_lowlevel.c b/drivers/video/exynos_dp_lowlevel.c new file mode 100644 index 0000000000..7b54c8084c --- /dev/null +++ b/drivers/video/exynos_dp_lowlevel.c @@ -0,0 +1,1291 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <linux/err.h> +#include <asm/arch/cpu.h> +#include <asm/arch/dp_info.h> +#include <asm/arch/dp.h> + +static void exynos_dp_enable_video_input(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->video_ctl1); + reg &= ~VIDEO_EN_MASK; + + /* enable video input*/ + if (enable) + reg |= VIDEO_EN_MASK; + + writel(reg, &dp_regs->video_ctl1); + + return; +} + +void exynos_dp_enable_video_bist(unsigned int enable) +{ + /*enable video bist*/ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->video_ctl4); + reg &= ~VIDEO_BIST_MASK; + + /*enable video bist*/ + if (enable) + reg |= VIDEO_BIST_MASK; + + writel(reg, &dp_regs->video_ctl4); + + return; +} + +void exynos_dp_enable_video_mute(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->video_ctl1); + reg &= ~(VIDEO_MUTE_MASK); + if (enable) + reg |= VIDEO_MUTE_MASK; + + writel(reg, &dp_regs->video_ctl1); + + return; +} + + +static void exynos_dp_init_analog_param(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* + * Set termination + * Normal bandgap, Normal swing, Tx terminal registor 61 ohm + * 24M Phy clock, TX digital logic power is 100:1.0625V + */ + reg = SEL_BG_NEW_BANDGAP | TX_TERMINAL_CTRL_61_OHM | + SWING_A_30PER_G_NORMAL; + writel(reg, &dp_regs->analog_ctl1); + + reg = SEL_24M | TX_DVDD_BIT_1_0625V; + writel(reg, &dp_regs->analog_ctl2); + + /* + * Set power source for internal clk driver to 1.0625v. + * Select current reference of TX driver current to 00:Ipp/2+Ic/2. + * Set VCO range of PLL +- 0uA + */ + reg = DRIVE_DVDD_BIT_1_0625V | SEL_CURRENT_DEFAULT | VCO_BIT_000_MICRO; + writel(reg, &dp_regs->analog_ctl3); + + /* + * Set AUX TX terminal resistor to 102 ohm + * Set AUX channel amplitude control + */ + reg = PD_RING_OSC | AUX_TERMINAL_CTRL_52_OHM | TX_CUR1_2X | TX_CUR_4_MA; + writel(reg, &dp_regs->pll_filter_ctl1); + + /* + * PLL loop filter bandwidth + * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz + * PLL digital power select: 1.2500V + */ + reg = CH3_AMP_0_MV | CH2_AMP_0_MV | CH1_AMP_0_MV | CH0_AMP_0_MV; + + writel(reg, &dp_regs->amp_tuning_ctl); + + /* + * PLL loop filter bandwidth + * For 2.7Gbps: 175KHz, For 1.62Gbps: 234KHz + * PLL digital power select: 1.1250V + */ + reg = DP_PLL_LOOP_BIT_DEFAULT | DP_PLL_REF_BIT_1_1250V; + writel(reg, &dp_regs->pll_ctl); +} + +static void exynos_dp_init_interrupt(void) +{ + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + /* Set interrupt registers to initial states */ + + /* + * Disable interrupt + * INT pin assertion polarity. It must be configured + * correctly according to ICU setting. + * 1 = assert high, 0 = assert low + */ + writel(INT_POL, &dp_regs->int_ctl); + + /* Clear pending regisers */ + writel(0xff, &dp_regs->common_int_sta1); + writel(0xff, &dp_regs->common_int_sta2); + writel(0xff, &dp_regs->common_int_sta3); + writel(0xff, &dp_regs->common_int_sta4); + writel(0xff, &dp_regs->int_sta); + + /* 0:mask,1: unmask */ + writel(0x00, &dp_regs->int_sta_mask1); + writel(0x00, &dp_regs->int_sta_mask2); + writel(0x00, &dp_regs->int_sta_mask3); + writel(0x00, &dp_regs->int_sta_mask4); + writel(0x00, &dp_regs->int_sta_mask); +} + +void exynos_dp_reset(void) +{ + unsigned int reg_func_1; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /*dp tx sw reset*/ + writel(RESET_DP_TX, &dp_regs->tx_sw_reset); + + exynos_dp_enable_video_input(DP_DISABLE); + exynos_dp_enable_video_bist(DP_DISABLE); + exynos_dp_enable_video_mute(DP_DISABLE); + + /* software reset */ + reg_func_1 = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N | + AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N | + HDCP_FUNC_EN_N | SW_FUNC_EN_N; + + writel(reg_func_1, &dp_regs->func_en1); + writel(reg_func_1, &dp_regs->func_en2); + + mdelay(1); + + exynos_dp_init_analog_param(); + exynos_dp_init_interrupt(); + + return; +} + +void exynos_dp_enable_sw_func(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->func_en1); + reg &= ~(SW_FUNC_EN_N); + + if (!enable) + reg |= SW_FUNC_EN_N; + + writel(reg, &dp_regs->func_en1); + + return; +} + +unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->phy_pd); + switch (block) { + case AUX_BLOCK: + reg &= ~(AUX_PD); + if (enable) + reg |= AUX_PD; + break; + case CH0_BLOCK: + reg &= ~(CH0_PD); + if (enable) + reg |= CH0_PD; + break; + case CH1_BLOCK: + reg &= ~(CH1_PD); + if (enable) + reg |= CH1_PD; + break; + case CH2_BLOCK: + reg &= ~(CH2_PD); + if (enable) + reg |= CH2_PD; + break; + case CH3_BLOCK: + reg &= ~(CH3_PD); + if (enable) + reg |= CH3_PD; + break; + case ANALOG_TOTAL: + reg &= ~PHY_PD; + if (enable) + reg |= PHY_PD; + break; + case POWER_ALL: + reg &= ~(PHY_PD | AUX_PD | CH0_PD | CH1_PD | CH2_PD | + CH3_PD); + if (enable) + reg |= (PHY_PD | AUX_PD | CH0_PD | CH1_PD | + CH2_PD | CH3_PD); + break; + default: + printf("DP undefined block number : %d\n", block); + return -1; + } + + writel(reg, &dp_regs->phy_pd); + + return 0; +} + +unsigned int exynos_dp_get_pll_lock_status(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->debug_ctl); + + if (reg & PLL_LOCK) + return PLL_LOCKED; + else + return PLL_UNLOCKED; +} + +static void exynos_dp_set_pll_power(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->pll_ctl); + reg &= ~(DP_PLL_PD); + + if (!enable) + reg |= DP_PLL_PD; + + writel(reg, &dp_regs->pll_ctl); +} + +int exynos_dp_init_analog_func(void) +{ + int ret = EXYNOS_DP_SUCCESS; + unsigned int retry_cnt = 10; + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /*Power On All Analog block */ + exynos_dp_set_analog_power_down(POWER_ALL, DP_DISABLE); + + reg = PLL_LOCK_CHG; + writel(reg, &dp_regs->common_int_sta1); + + reg = readl(&dp_regs->debug_ctl); + reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL); + writel(reg, &dp_regs->debug_ctl); + + /*Assert DP PLL Reset*/ + reg = readl(&dp_regs->pll_ctl); + reg |= DP_PLL_RESET; + writel(reg, &dp_regs->pll_ctl); + + mdelay(1); + + /*Deassert DP PLL Reset*/ + reg = readl(&dp_regs->pll_ctl); + reg &= ~(DP_PLL_RESET); + writel(reg, &dp_regs->pll_ctl); + + exynos_dp_set_pll_power(DP_ENABLE); + + while (exynos_dp_get_pll_lock_status() == PLL_UNLOCKED) { + mdelay(1); + retry_cnt--; + if (retry_cnt == 0) { + printf("DP dp's pll lock failed : retry : %d\n", + retry_cnt); + return -EINVAL; + } + } + + debug("dp's pll lock success(%d)\n", retry_cnt); + + /* Enable Serdes FIFO function and Link symbol clock domain module */ + reg = readl(&dp_regs->func_en2); + reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N + | AUX_FUNC_EN_N); + writel(reg, &dp_regs->func_en2); + + return ret; +} + +void exynos_dp_init_hpd(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear interrupts releated to Hot Plug Dectect */ + reg = HOTPLUG_CHG | HPD_LOST | PLUG; + writel(reg, &dp_regs->common_int_sta4); + + reg = INT_HPD; + writel(reg, &dp_regs->int_sta); + + reg = readl(&dp_regs->sys_ctl3); + reg &= ~(F_HPD | HPD_CTRL); + writel(reg, &dp_regs->sys_ctl3); + + return; +} + +static inline void exynos_dp_reset_aux(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Disable AUX channel module */ + reg = readl(&dp_regs->func_en2); + reg |= AUX_FUNC_EN_N; + writel(reg, &dp_regs->func_en2); + + return; +} + +void exynos_dp_init_aux(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear inerrupts related to AUX channel */ + reg = RPLY_RECEIV | AUX_ERR; + writel(reg, &dp_regs->int_sta); + + exynos_dp_reset_aux(); + + /* Disable AUX transaction H/W retry */ + reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3) | AUX_HW_RETRY_COUNT_SEL(3)| + AUX_HW_RETRY_INTERVAL_600_MICROSECONDS; + writel(reg, &dp_regs->aux_hw_retry_ctl); + + /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ + reg = DEFER_CTRL_EN | DEFER_COUNT(1); + writel(reg, &dp_regs->aux_ch_defer_ctl); + + /* Enable AUX channel module */ + reg = readl(&dp_regs->func_en2); + reg &= ~AUX_FUNC_EN_N; + writel(reg, &dp_regs->func_en2); + + return; +} + +void exynos_dp_config_interrupt(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* 0: mask, 1: unmask */ + reg = COMMON_INT_MASK_1; + writel(reg, &dp_regs->common_int_mask1); + + reg = COMMON_INT_MASK_2; + writel(reg, &dp_regs->common_int_mask2); + + reg = COMMON_INT_MASK_3; + writel(reg, &dp_regs->common_int_mask3); + + reg = COMMON_INT_MASK_4; + writel(reg, &dp_regs->common_int_mask4); + + reg = INT_STA_MASK; + writel(reg, &dp_regs->int_sta_mask); + + return; +} + +unsigned int exynos_dp_get_plug_in_status(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->sys_ctl3); + if (reg & HPD_STATUS) + return 0; + + return -1; +} + +unsigned int exynos_dp_detect_hpd(void) +{ + int timeout_loop = DP_TIMEOUT_LOOP_COUNT; + + mdelay(2); + + while (exynos_dp_get_plug_in_status() != 0) { + if (timeout_loop == 0) + return -EINVAL; + mdelay(10); + timeout_loop--; + } + + return EXYNOS_DP_SUCCESS; +} + +unsigned int exynos_dp_start_aux_transaction(void) +{ + unsigned int reg; + unsigned int ret = 0; + unsigned int retry_cnt; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Enable AUX CH operation */ + reg = readl(&dp_regs->aux_ch_ctl2); + reg |= AUX_EN; + writel(reg, &dp_regs->aux_ch_ctl2); + + retry_cnt = 10; + while (retry_cnt) { + reg = readl(&dp_regs->int_sta); + if (!(reg & RPLY_RECEIV)) { + if (retry_cnt == 0) { + printf("DP Reply Timeout!!\n"); + ret = -EAGAIN; + return ret; + } + mdelay(1); + retry_cnt--; + } else + break; + } + + /* Clear interrupt source for AUX CH command reply */ + writel(reg, &dp_regs->int_sta); + + /* Clear interrupt source for AUX CH access error */ + reg = readl(&dp_regs->int_sta); + if (reg & AUX_ERR) { + printf("DP Aux Access Error\n"); + writel(AUX_ERR, &dp_regs->int_sta); + ret = -EAGAIN; + return ret; + } + + /* Check AUX CH error access status */ + reg = readl(&dp_regs->aux_ch_sta); + if ((reg & AUX_STATUS_MASK) != 0) { + debug("DP AUX CH error happens: %x\n", reg & AUX_STATUS_MASK); + ret = -EAGAIN; + return ret; + } + + return EXYNOS_DP_SUCCESS; +} + +unsigned int exynos_dp_write_byte_to_dpcd(unsigned int reg_addr, + unsigned char data) +{ + unsigned int reg, ret; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr); + writel(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr); + writel(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr); + writel(reg, &dp_regs->aux_addr_19_16); + + /* Write data buffer */ + reg = (unsigned int)data; + writel(reg, &dp_regs->buf_data0); + + /* + * Set DisplayPort transaction and write 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + printf("DP Aux transaction failed\n"); + return ret; + } + + return ret; +} + +unsigned int exynos_dp_read_byte_from_dpcd(unsigned int reg_addr, + unsigned char *data) +{ + unsigned int reg; + int retval; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr); + writel(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr); + writel(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr); + writel(reg, &dp_regs->aux_addr_19_16); + + /* + * Set DisplayPort transaction and read 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (!retval) + debug("DP Aux Transaction fail!\n"); + + /* Read data buffer */ + reg = readl(&dp_regs->buf_data0); + *data = (unsigned char)(reg & 0xff); + + return retval; +} + +unsigned int exynos_dp_write_bytes_to_dpcd(unsigned int reg_addr, + unsigned int count, + unsigned char data[]) +{ + unsigned int reg; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + unsigned int retry_cnt; + unsigned int ret = 0; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + retry_cnt = 5; + while (retry_cnt) { + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_19_16); + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + reg = data[start_offset + cur_data_idx]; + writel(reg, (unsigned int)&dp_regs->buf_data0 + + (4 * cur_data_idx)); + } + /* + * Set DisplayPort transaction and write + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP Aux Transaction failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + start_offset += cur_data_count; + } + + return ret; +} + +unsigned int exynos_dp_read_bytes_from_dpcd(unsigned int reg_addr, + unsigned int count, + unsigned char data[]) +{ + unsigned int reg; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + unsigned int retry_cnt; + unsigned int ret = 0; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + retry_cnt = 5; + while (retry_cnt) { + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_7_0); + reg = AUX_ADDR_15_8(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_15_8); + reg = AUX_ADDR_19_16(reg_addr + start_offset); + writel(reg, &dp_regs->aux_addr_19_16); + /* + * Set DisplayPort transaction and read + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + ret = exynos_dp_start_aux_transaction(); + if (ret != EXYNOS_DP_SUCCESS) { + if (retry_cnt == 0) { + printf("DP Aux Transaction failed\n"); + return ret; + } + retry_cnt--; + } else + break; + } + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + reg = readl((unsigned int)&dp_regs->buf_data0 + + 4 * cur_data_idx); + data[start_offset + cur_data_idx] = (unsigned char)reg; + } + + start_offset += cur_data_count; + } + + return ret; +} + +int exynos_dp_select_i2c_device(unsigned int device_addr, + unsigned int reg_addr) +{ + unsigned int reg; + int retval; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Set EDID device address */ + reg = device_addr; + writel(reg, &dp_regs->aux_addr_7_0); + writel(0x0, &dp_regs->aux_addr_15_8); + writel(0x0, &dp_regs->aux_addr_19_16); + + /* Set offset from base address of EDID device */ + writel(reg_addr, &dp_regs->buf_data0); + + /* + * Set I2C transaction and write address + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT | + AUX_TX_COMM_WRITE; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != 0) + printf("%s: DP Aux Transaction fail!\n", __func__); + + return retval; +} + +int exynos_dp_read_byte_from_i2c(unsigned int device_addr, + unsigned int reg_addr, + unsigned int *data) +{ + unsigned int reg; + int i; + int retval; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + for (i = 0; i < 10; i++) { + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + /* Select EDID device */ + retval = exynos_dp_select_i2c_device(device_addr, reg_addr); + if (retval != 0) { + printf("DP Select EDID device fail. retry !\n"); + continue; + } + + /* + * Set I2C transaction and read data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_TX_COMM_I2C_TRANSACTION | + AUX_TX_COMM_READ; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval != EXYNOS_DP_SUCCESS) + printf("%s: DP Aux Transaction fail!\n", __func__); + } + + /* Read data */ + if (retval == 0) + *data = readl(&dp_regs->buf_data0); + + return retval; +} + +int exynos_dp_read_bytes_from_i2c(unsigned int device_addr, + unsigned int reg_addr, unsigned int count, unsigned char edid[]) +{ + unsigned int reg; + unsigned int i, j; + unsigned int cur_data_idx; + unsigned int defer = 0; + int retval = 0; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + for (i = 0; i < count; i += 16) { /* use 16 burst */ + for (j = 0; j < 100; j++) { + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, &dp_regs->buffer_data_ctl); + + /* Set normal AUX CH command */ + reg = readl(&dp_regs->aux_ch_ctl2); + reg &= ~ADDR_ONLY; + writel(reg, &dp_regs->aux_ch_ctl2); + + /* + * If Rx sends defer, Tx sends only reads + * request without sending addres + */ + if (!defer) + retval = + exynos_dp_select_i2c_device(device_addr, + reg_addr + i); + else + defer = 0; + + if (retval == EXYNOS_DP_SUCCESS) { + /* + * Set I2C transaction and write data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + reg = AUX_LENGTH(16) | + AUX_TX_COMM_I2C_TRANSACTION | + AUX_TX_COMM_READ; + writel(reg, &dp_regs->aux_ch_ctl1); + + /* Start AUX transaction */ + retval = exynos_dp_start_aux_transaction(); + if (retval == 0) + break; + else + printf("DP Aux Transaction fail!\n"); + } + /* Check if Rx sends defer */ + reg = readl(&dp_regs->aux_rx_comm); + if (reg == AUX_RX_COMM_AUX_DEFER || + reg == AUX_RX_COMM_I2C_DEFER) { + printf("DP Defer: %d\n\n", reg); + defer = 1; + } + } + + for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) { + reg = readl((unsigned int)&dp_regs->buf_data0 + + 4 * cur_data_idx); + edid[i + cur_data_idx] = (unsigned char)reg; + } + } + + return retval; +} + +void exynos_dp_reset_macro(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->phy_test); + reg |= MACRO_RST; + writel(reg, &dp_regs->phy_test); + + /* 10 us is the minimum Macro reset time. */ + mdelay(1); + + reg &= ~MACRO_RST; + writel(reg, &dp_regs->phy_test); +} + +void exynos_dp_set_link_bandwidth(unsigned char bwtype) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = (unsigned int)bwtype; + + /* Set bandwidth to 2.7G or 1.62G */ + if ((bwtype == DP_LANE_BW_1_62) || (bwtype == DP_LANE_BW_2_70)) + writel(reg, &dp_regs->link_bw_set); +} + +unsigned char exynos_dp_get_link_bandwidth(void) +{ + unsigned char ret; + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->link_bw_set); + ret = (unsigned char)reg; + + return ret; +} + +void exynos_dp_set_lane_count(unsigned char count) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = (unsigned int)count; + + if ((count == DP_LANE_CNT_1) || (count == DP_LANE_CNT_2) || + (count == DP_LANE_CNT_4)) + writel(reg, &dp_regs->lane_count_set); +} + +unsigned int exynos_dp_get_lane_count(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->lane_count_set); + + return reg; +} + +unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt) +{ + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + unsigned int reg_list[DP_LANE_CNT_4] = { + (unsigned int)&dp_regs->ln0_link_training_ctl, + (unsigned int)&dp_regs->ln1_link_training_ctl, + (unsigned int)&dp_regs->ln2_link_training_ctl, + (unsigned int)&dp_regs->ln3_link_training_ctl, + }; + + return readl(reg_list[lanecnt]); +} + +void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val, + unsigned char lanecnt) +{ + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + unsigned int reg_list[DP_LANE_CNT_4] = { + (unsigned int)&dp_regs->ln0_link_training_ctl, + (unsigned int)&dp_regs->ln1_link_training_ctl, + (unsigned int)&dp_regs->ln2_link_training_ctl, + (unsigned int)&dp_regs->ln3_link_training_ctl, + }; + + writel(request_val, reg_list[lanecnt]); +} + +void exynos_dp_set_lane_pre_emphasis(unsigned int level, unsigned char lanecnt) +{ + unsigned char i; + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + unsigned int reg_list[DP_LANE_CNT_4] = { + (unsigned int)&dp_regs->ln0_link_training_ctl, + (unsigned int)&dp_regs->ln1_link_training_ctl, + (unsigned int)&dp_regs->ln2_link_training_ctl, + (unsigned int)&dp_regs->ln3_link_training_ctl, + }; + unsigned int reg_shift[DP_LANE_CNT_4] = { + PRE_EMPHASIS_SET_0_SHIFT, + PRE_EMPHASIS_SET_1_SHIFT, + PRE_EMPHASIS_SET_2_SHIFT, + PRE_EMPHASIS_SET_3_SHIFT + }; + + for (i = 0; i < lanecnt; i++) { + reg = level << reg_shift[i]; + writel(reg, reg_list[i]); + } +} + +void exynos_dp_set_training_pattern(unsigned int pattern) +{ + unsigned int reg = 0; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + switch (pattern) { + case PRBS7: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7; + break; + case D10_2: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2; + break; + case TRAINING_PTN1: + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1; + break; + case TRAINING_PTN2: + reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2; + break; + case DP_NONE: + reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_DISABLE | + SW_TRAINING_PATTERN_SET_NORMAL; + break; + default: + break; + } + + writel(reg, &dp_regs->training_ptn_set); +} + +void exynos_dp_enable_enhanced_mode(unsigned char enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->sys_ctl4); + reg &= ~ENHANCED; + + if (enable) + reg |= ENHANCED; + + writel(reg, &dp_regs->sys_ctl4); +} + +void exynos_dp_enable_scrambling(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->training_ptn_set); + reg &= ~(SCRAMBLING_DISABLE); + + if (!enable) + reg |= SCRAMBLING_DISABLE; + + writel(reg, &dp_regs->training_ptn_set); +} + +int exynos_dp_init_video(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Clear VID_CLK_CHG[1] and VID_FORMAT_CHG[3] and VSYNC_DET[7] */ + reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; + writel(reg, &dp_regs->common_int_sta1); + + /* I_STRM__CLK detect : DE_CTL : Auto detect */ + reg &= ~DET_CTRL; + writel(reg, &dp_regs->sys_ctl1); + + return 0; +} + +void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Video Slave mode setting */ + reg = readl(&dp_regs->func_en1); + reg &= ~(MASTER_VID_FUNC_EN_N|SLAVE_VID_FUNC_EN_N); + reg |= MASTER_VID_FUNC_EN_N; + writel(reg, &dp_regs->func_en1); + + /* Configure Interlaced for slave mode video */ + reg = readl(&dp_regs->video_ctl10); + reg &= ~INTERACE_SCAN_CFG; + reg |= (video_info->interlaced << INTERACE_SCAN_CFG_SHIFT); + writel(reg, &dp_regs->video_ctl10); + + /* Configure V sync polarity for slave mode video */ + reg = readl(&dp_regs->video_ctl10); + reg &= ~VSYNC_POLARITY_CFG; + reg |= (video_info->v_sync_polarity << V_S_POLARITY_CFG_SHIFT); + writel(reg, &dp_regs->video_ctl10); + + /* Configure H sync polarity for slave mode video */ + reg = readl(&dp_regs->video_ctl10); + reg &= ~HSYNC_POLARITY_CFG; + reg |= (video_info->h_sync_polarity << H_S_POLARITY_CFG_SHIFT); + writel(reg, &dp_regs->video_ctl10); + + /*Set video mode to slave mode */ + reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE; + writel(reg, &dp_regs->soc_general_ctl); +} + +void exynos_dp_set_video_color_format(struct edp_video_info *video_info) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Configure the input color depth, color space, dynamic range */ + reg = (video_info->dynamic_range << IN_D_RANGE_SHIFT) | + (video_info->color_depth << IN_BPC_SHIFT) | + (video_info->color_space << IN_COLOR_F_SHIFT); + writel(reg, &dp_regs->video_ctl2); + + /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ + reg = readl(&dp_regs->video_ctl3); + reg &= ~IN_YC_COEFFI_MASK; + if (video_info->ycbcr_coeff) + reg |= IN_YC_COEFFI_ITU709; + else + reg |= IN_YC_COEFFI_ITU601; + writel(reg, &dp_regs->video_ctl3); +} + +int exynos_dp_config_video_bist(struct edp_device_info *edp_info) +{ + unsigned int reg; + unsigned int bist_type = 0; + struct edp_video_info video_info = edp_info->video_info; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* For master mode, you don't need to set the video format */ + if (video_info.master_mode == 0) { + writel(TOTAL_LINE_CFG_L(edp_info->disp_info.v_total), + &dp_regs->total_ln_cfg_l); + writel(TOTAL_LINE_CFG_H(edp_info->disp_info.v_total), + &dp_regs->total_ln_cfg_h); + writel(ACTIVE_LINE_CFG_L(edp_info->disp_info.v_res), + &dp_regs->active_ln_cfg_l); + writel(ACTIVE_LINE_CFG_H(edp_info->disp_info.v_res), + &dp_regs->active_ln_cfg_h); + writel(edp_info->disp_info.v_sync_width, + &dp_regs->vsw_cfg); + writel(edp_info->disp_info.v_back_porch, + &dp_regs->vbp_cfg); + writel(edp_info->disp_info.v_front_porch, + &dp_regs->vfp_cfg); + + writel(TOTAL_PIXEL_CFG_L(edp_info->disp_info.h_total), + &dp_regs->total_pix_cfg_l); + writel(TOTAL_PIXEL_CFG_H(edp_info->disp_info.h_total), + &dp_regs->total_pix_cfg_h); + writel(ACTIVE_PIXEL_CFG_L(edp_info->disp_info.h_res), + &dp_regs->active_pix_cfg_l); + writel(ACTIVE_PIXEL_CFG_H(edp_info->disp_info.h_res), + &dp_regs->active_pix_cfg_h); + writel(H_F_PORCH_CFG_L(edp_info->disp_info.h_front_porch), + &dp_regs->hfp_cfg_l); + writel(H_F_PORCH_CFG_H(edp_info->disp_info.h_front_porch), + &dp_regs->hfp_cfg_h); + writel(H_SYNC_PORCH_CFG_L(edp_info->disp_info.h_sync_width), + &dp_regs->hsw_cfg_l); + writel(H_SYNC_PORCH_CFG_H(edp_info->disp_info.h_sync_width), + &dp_regs->hsw_cfg_h); + writel(H_B_PORCH_CFG_L(edp_info->disp_info.h_back_porch), + &dp_regs->hbp_cfg_l); + writel(H_B_PORCH_CFG_H(edp_info->disp_info.h_back_porch), + &dp_regs->hbp_cfg_h); + + /* + * Set SLAVE_I_SCAN_CFG[2], VSYNC_P_CFG[1], + * HSYNC_P_CFG[0] properly + */ + reg = (video_info.interlaced << INTERACE_SCAN_CFG_SHIFT | + video_info.v_sync_polarity << V_S_POLARITY_CFG_SHIFT | + video_info.h_sync_polarity << H_S_POLARITY_CFG_SHIFT); + writel(reg, &dp_regs->video_ctl10); + } + + /* BIST color bar width set--set to each bar is 32 pixel width */ + switch (video_info.bist_pattern) { + case COLORBAR_32: + bist_type = BIST_WIDTH_BAR_32_PIXEL | + BIST_TYPE_COLOR_BAR; + break; + case COLORBAR_64: + bist_type = BIST_WIDTH_BAR_64_PIXEL | + BIST_TYPE_COLOR_BAR; + break; + case WHITE_GRAY_BALCKBAR_32: + bist_type = BIST_WIDTH_BAR_32_PIXEL | + BIST_TYPE_WHITE_GRAY_BLACK_BAR; + break; + case WHITE_GRAY_BALCKBAR_64: + bist_type = BIST_WIDTH_BAR_64_PIXEL | + BIST_TYPE_WHITE_GRAY_BLACK_BAR; + break; + case MOBILE_WHITEBAR_32: + bist_type = BIST_WIDTH_BAR_32_PIXEL | + BIST_TYPE_MOBILE_WHITE_BAR; + break; + case MOBILE_WHITEBAR_64: + bist_type = BIST_WIDTH_BAR_64_PIXEL | + BIST_TYPE_MOBILE_WHITE_BAR; + break; + default: + return -1; + } + + reg = bist_type; + writel(reg, &dp_regs->video_ctl4); + + return 0; +} + +unsigned int exynos_dp_is_slave_video_stream_clock_on(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Update Video stream clk detect status */ + reg = readl(&dp_regs->sys_ctl1); + writel(reg, &dp_regs->sys_ctl1); + + reg = readl(&dp_regs->sys_ctl1); + + if (!(reg & DET_STA)) { + debug("DP Input stream clock not detected.\n"); + return -EIO; + } + + return EXYNOS_DP_SUCCESS; +} + +void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, + unsigned int n_value) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + if (type == REGISTER_M) { + reg = readl(&dp_regs->sys_ctl4); + reg |= FIX_M_VID; + writel(reg, &dp_regs->sys_ctl4); + reg = M_VID0_CFG(m_value); + writel(reg, &dp_regs->m_vid0); + reg = M_VID1_CFG(m_value); + writel(reg, &dp_regs->m_vid1); + reg = M_VID2_CFG(m_value); + writel(reg, &dp_regs->m_vid2); + + reg = N_VID0_CFG(n_value); + writel(reg, &dp_regs->n_vid0); + reg = N_VID1_CFG(n_value); + writel(reg, &dp_regs->n_vid1); + reg = N_VID2_CFG(n_value); + writel(reg, &dp_regs->n_vid2); + } else { + reg = readl(&dp_regs->sys_ctl4); + reg &= ~FIX_M_VID; + writel(reg, &dp_regs->sys_ctl4); + } +} + +void exynos_dp_set_video_timing_mode(unsigned int type) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->video_ctl10); + reg &= ~FORMAT_SEL; + + if (type != VIDEO_TIMING_FROM_CAPTURE) + reg |= FORMAT_SEL; + + writel(reg, &dp_regs->video_ctl10); +} + +void exynos_dp_enable_video_master(unsigned int enable) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + reg = readl(&dp_regs->soc_general_ctl); + if (enable) { + reg &= ~VIDEO_MODE_MASK; + reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE; + } else { + reg &= ~VIDEO_MODE_MASK; + reg |= VIDEO_MODE_SLAVE_MODE; + } + + writel(reg, &dp_regs->soc_general_ctl); +} + +void exynos_dp_start_video(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Enable Video input and disable Mute */ + reg = readl(&dp_regs->video_ctl1); + reg |= VIDEO_EN; + writel(reg, &dp_regs->video_ctl1); +} + +unsigned int exynos_dp_is_video_stream_on(void) +{ + unsigned int reg; + struct exynos_dp *dp_regs = (struct exynos_dp *)samsung_get_base_dp(); + + /* Update STRM_VALID */ + reg = readl(&dp_regs->sys_ctl3); + writel(reg, &dp_regs->sys_ctl3); + + reg = readl(&dp_regs->sys_ctl3); + if (!(reg & STRM_VALID)) + return -EIO; + + return EXYNOS_DP_SUCCESS; +} diff --git a/drivers/video/exynos_dp_lowlevel.h b/drivers/video/exynos_dp_lowlevel.h new file mode 100644 index 0000000000..a041a7ab50 --- /dev/null +++ b/drivers/video/exynos_dp_lowlevel.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _EXYNOS_EDP_LOWLEVEL_H +#define _EXYNOS_EDP_LOWLEVEL_H + +void exynos_dp_enable_video_bist(unsigned int enable); +void exynos_dp_enable_video_mute(unsigned int enable); +void exynos_dp_reset(void); +void exynos_dp_enable_sw_func(unsigned int enable); +unsigned int exynos_dp_set_analog_power_down(unsigned int block, u32 enable); +unsigned int exynos_dp_get_pll_lock_status(void); +int exynos_dp_init_analog_func(void); +void exynos_dp_init_hpd(void); +void exynos_dp_init_aux(void); +void exynos_dp_config_interrupt(void); +unsigned int exynos_dp_get_plug_in_status(void); +unsigned int exynos_dp_detect_hpd(void); +unsigned int exynos_dp_start_aux_transaction(void); +unsigned int exynos_dp_write_byte_to_dpcd(unsigned int reg_addr, + unsigned char data); +unsigned int exynos_dp_read_byte_from_dpcd(unsigned int reg_addr, + unsigned char *data); +unsigned int exynos_dp_write_bytes_to_dpcd(unsigned int reg_addr, + unsigned int count, + unsigned char data[]); +unsigned int exynos_dp_read_bytes_from_dpcd( unsigned int reg_addr, + unsigned int count, + unsigned char data[]); +int exynos_dp_select_i2c_device( unsigned int device_addr, + unsigned int reg_addr); +int exynos_dp_read_byte_from_i2c(unsigned int device_addr, + unsigned int reg_addr, unsigned int *data); +int exynos_dp_read_bytes_from_i2c(unsigned int device_addr, + unsigned int reg_addr, unsigned int count, + unsigned char edid[]); +void exynos_dp_reset_macro(void); +void exynos_dp_set_link_bandwidth(unsigned char bwtype); +unsigned char exynos_dp_get_link_bandwidth(void); +void exynos_dp_set_lane_count(unsigned char count); +unsigned int exynos_dp_get_lane_count(void); +unsigned char exynos_dp_get_lanex_pre_emphasis(unsigned char lanecnt); +void exynos_dp_set_lane_pre_emphasis(unsigned int level, + unsigned char lanecnt); +void exynos_dp_set_lanex_pre_emphasis(unsigned char request_val, + unsigned char lanecnt); +void exynos_dp_set_training_pattern(unsigned int pattern); +void exynos_dp_enable_enhanced_mode(unsigned char enable); +void exynos_dp_enable_scrambling(unsigned int enable); +int exynos_dp_init_video(void); +void exynos_dp_config_video_slave_mode(struct edp_video_info *video_info); +void exynos_dp_set_video_color_format(struct edp_video_info *video_info); +int exynos_dp_config_video_bist(struct edp_device_info *edp_info); +unsigned int exynos_dp_is_slave_video_stream_clock_on(void); +void exynos_dp_set_video_cr_mn(unsigned int type, unsigned int m_value, + unsigned int n_value); +void exynos_dp_set_video_timing_mode(unsigned int type); +void exynos_dp_enable_video_master(unsigned int enable); +void exynos_dp_start_video(void); +unsigned int exynos_dp_is_video_stream_on(void); + +#endif /* _EXYNOS_DP_LOWLEVEL_H */ diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index 49fdfec763..e31a0fd500 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -28,6 +28,7 @@ #include <asm/arch/clock.h> #include <asm/arch/clk.h> #include <asm/arch/mipi_dsim.h> +#include <asm/arch/dp_info.h> #include <asm/arch/system.h> #include "exynos_fb.h" @@ -91,6 +92,9 @@ static void lcd_panel_on(vidinfo_t *vid) udelay(vid->power_on_delay); + if (vid->dp_enabled) + exynos_init_dp(); + if (vid->reset_lcd) { vid->reset_lcd(); udelay(vid->reset_delay); @@ -130,7 +134,6 @@ void lcd_enable(void) if (panel_info.logo_on) { memset(lcd_base, 0, panel_width * panel_height * (NBITS(panel_info.vl_bpix) >> 3)); - draw_logo(); } diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c index f07568acca..06eae2ed78 100644 --- a/drivers/video/exynos_fimd.c +++ b/drivers/video/exynos_fimd.c @@ -41,8 +41,8 @@ void exynos_fimd_lcd_init_mem(u_long screen_base, u_long fb_size, static void exynos_fimd_set_dualrgb(unsigned int enabled) { - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); unsigned int cfg = 0; if (enabled) { @@ -57,11 +57,24 @@ static void exynos_fimd_set_dualrgb(unsigned int enabled) writel(cfg, &fimd_ctrl->dualrgb); } +static void exynos_fimd_set_dp_clkcon(unsigned int enabled) +{ + + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); + unsigned int cfg = 0; + + if (enabled) + cfg = EXYNOS_DP_CLK_ENABLE; + + writel(cfg, &fimd_ctrl->dp_mie_clkcon); +} + static void exynos_fimd_set_par(unsigned int win_id) { unsigned int cfg = 0; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); /* set window control */ cfg = readl((unsigned int)&fimd_ctrl->wincon0 + @@ -93,7 +106,10 @@ static void exynos_fimd_set_par(unsigned int win_id) EXYNOS_VIDOSD(win_id)); cfg = EXYNOS_VIDOSD_RIGHT_X(pvid->vl_col - 1) | - EXYNOS_VIDOSD_BOTTOM_Y(pvid->vl_row - 1); + EXYNOS_VIDOSD_BOTTOM_Y(pvid->vl_row - 1) | + EXYNOS_VIDOSD_RIGHT_X_E(1) | + EXYNOS_VIDOSD_BOTTOM_Y_E(0); + writel(cfg, (unsigned int)&fimd_ctrl->vidosd0b + EXYNOS_VIDOSD(win_id)); @@ -106,8 +122,8 @@ static void exynos_fimd_set_par(unsigned int win_id) static void exynos_fimd_set_buffer_address(unsigned int win_id) { unsigned long start_addr, end_addr; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); start_addr = (unsigned long)lcd_base_addr; end_addr = start_addr + ((pvid->vl_col * (NBITS(pvid->vl_bpix) / 8)) * @@ -124,8 +140,8 @@ static void exynos_fimd_set_clock(vidinfo_t *pvid) unsigned int cfg = 0, div = 0, remainder, remainder_div; unsigned long pixel_clock; unsigned long long src_clock; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); if (pvid->dual_lcd_enabled) { pixel_clock = pvid->vl_freq * @@ -153,9 +169,6 @@ static void exynos_fimd_set_clock(vidinfo_t *pvid) cfg |= (EXYNOS_VIDCON0_CLKSEL_SCLK | EXYNOS_VIDCON0_CLKVALUP_ALWAYS | EXYNOS_VIDCON0_VCLKEN_NORMAL | EXYNOS_VIDCON0_CLKDIR_DIVIDED); - if (pixel_clock > MAX_CLOCK) - pixel_clock = MAX_CLOCK; - src_clock = (unsigned long long) get_lcd_clk(); /* get quotient and remainder. */ @@ -180,8 +193,8 @@ static void exynos_fimd_set_clock(vidinfo_t *pvid) void exynos_set_trigger(void) { unsigned int cfg = 0; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); cfg = readl(&fimd_ctrl->trigcon); @@ -194,8 +207,8 @@ int exynos_is_i80_frame_done(void) { unsigned int cfg = 0; int status; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); cfg = readl(&fimd_ctrl->trigcon); @@ -209,8 +222,8 @@ int exynos_is_i80_frame_done(void) static void exynos_fimd_lcd_on(void) { unsigned int cfg = 0; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); /* display on */ cfg = readl(&fimd_ctrl->vidcon0); @@ -221,8 +234,8 @@ static void exynos_fimd_lcd_on(void) static void exynos_fimd_window_on(unsigned int win_id) { unsigned int cfg = 0; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); /* enable window */ cfg = readl((unsigned int)&fimd_ctrl->wincon0 + @@ -239,8 +252,8 @@ static void exynos_fimd_window_on(unsigned int win_id) void exynos_fimd_lcd_off(void) { unsigned int cfg = 0; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); cfg = readl(&fimd_ctrl->vidcon0); cfg &= (EXYNOS_VIDCON0_ENVID_DISABLE | EXYNOS_VIDCON0_ENVID_F_DISABLE); @@ -250,8 +263,8 @@ void exynos_fimd_lcd_off(void) void exynos_fimd_window_off(unsigned int win_id) { unsigned int cfg = 0; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); cfg = readl((unsigned int)&fimd_ctrl->wincon0 + EXYNOS_WINCON(win_id)); @@ -264,11 +277,15 @@ void exynos_fimd_window_off(unsigned int win_id) writel(cfg, &fimd_ctrl->winshmap); } + void exynos_fimd_lcd_init(vidinfo_t *vid) { unsigned int cfg = 0, rgb_mode; - struct exynos4_fb *fimd_ctrl = - (struct exynos4_fb *)samsung_get_base_fimd(); + unsigned int offset; + struct exynos_fb *fimd_ctrl = + (struct exynos_fb *)samsung_get_base_fimd(); + + offset = exynos_fimd_get_base_offset(); /* store panel info to global variable */ pvid = vid; @@ -297,25 +314,27 @@ void exynos_fimd_lcd_init(vidinfo_t *vid) if (!pvid->vl_dp) cfg |= EXYNOS_VIDCON1_IVDEN_INVERT; - writel(cfg, &fimd_ctrl->vidcon1); + writel(cfg, (unsigned int)&fimd_ctrl->vidcon1 + offset); /* set timing */ cfg = EXYNOS_VIDTCON0_VFPD(pvid->vl_vfpd - 1); cfg |= EXYNOS_VIDTCON0_VBPD(pvid->vl_vbpd - 1); cfg |= EXYNOS_VIDTCON0_VSPW(pvid->vl_vspw - 1); - writel(cfg, &fimd_ctrl->vidtcon0); + writel(cfg, (unsigned int)&fimd_ctrl->vidtcon0 + offset); cfg = EXYNOS_VIDTCON1_HFPD(pvid->vl_hfpd - 1); cfg |= EXYNOS_VIDTCON1_HBPD(pvid->vl_hbpd - 1); cfg |= EXYNOS_VIDTCON1_HSPW(pvid->vl_hspw - 1); - writel(cfg, &fimd_ctrl->vidtcon1); + writel(cfg, (unsigned int)&fimd_ctrl->vidtcon1 + offset); /* set lcd size */ - cfg = EXYNOS_VIDTCON2_HOZVAL(pvid->vl_col - 1); - cfg |= EXYNOS_VIDTCON2_LINEVAL(pvid->vl_row - 1); + cfg = EXYNOS_VIDTCON2_HOZVAL(pvid->vl_col - 1) | + EXYNOS_VIDTCON2_LINEVAL(pvid->vl_row - 1) | + EXYNOS_VIDTCON2_HOZVAL_E(pvid->vl_col - 1) | + EXYNOS_VIDTCON2_LINEVAL_E(pvid->vl_row - 1); - writel(cfg, &fimd_ctrl->vidtcon2); + writel(cfg, (unsigned int)&fimd_ctrl->vidtcon2 + offset); } /* set display mode */ @@ -331,7 +350,11 @@ void exynos_fimd_lcd_init(vidinfo_t *vid) exynos_fimd_set_buffer_address(pvid->win_id); /* set buffer size */ - cfg = EXYNOS_VIDADDR_PAGEWIDTH(pvid->vl_col * NBITS(pvid->vl_bpix) / 8); + cfg = EXYNOS_VIDADDR_PAGEWIDTH(pvid->vl_col * NBITS(pvid->vl_bpix) / 8) | + EXYNOS_VIDADDR_PAGEWIDTH_E(pvid->vl_col * NBITS(pvid->vl_bpix) / 8) | + EXYNOS_VIDADDR_OFFSIZE(0) | + EXYNOS_VIDADDR_OFFSIZE_E(0); + writel(cfg, (unsigned int)&fimd_ctrl->vidw00add2 + EXYNOS_BUFFER_SIZE(pvid->win_id)); @@ -346,6 +369,8 @@ void exynos_fimd_lcd_init(vidinfo_t *vid) /* window on */ exynos_fimd_window_on(pvid->win_id); + + exynos_fimd_set_dp_clkcon(pvid->dp_enabled); } unsigned long exynos_fimd_calc_fbsize(void) diff --git a/drivers/video/exynos_pwm_bl.c b/drivers/video/exynos_pwm_bl.c new file mode 100644 index 0000000000..27fb0b5e7e --- /dev/null +++ b/drivers/video/exynos_pwm_bl.c @@ -0,0 +1,57 @@ +/* + * PWM BACKLIGHT driver for Board based on EXYNOS. + * + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * Derived from linux/drivers/video/backlight/pwm_backlight.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <common.h> +#include <pwm.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pwm.h> +#include <asm/arch/pwm_backlight.h> + +static struct pwm_backlight_data *pwm; + +static int exynos_pwm_backlight_update_status(void) +{ + int brightness = pwm->brightness; + int max = pwm->max_brightness; + + if (brightness == 0) { + pwm_config(pwm->pwm_id, 0, pwm->period); + pwm_disable(pwm->pwm_id); + } else { + pwm_config(pwm->pwm_id, + brightness * pwm->period / max, pwm->period); + pwm_enable(pwm->pwm_id); + } + return 0; +} + +int exynos_pwm_backlight_init(struct pwm_backlight_data *pd) +{ + pwm = pd; + + exynos_pwm_backlight_update_status(); + + return 0; +} diff --git a/include/configs/SX1.h b/include/configs/SX1.h index ea09368993..93d031ca85 100644 --- a/include/configs/SX1.h +++ b/include/configs/SX1.h @@ -35,8 +35,6 @@ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000 /* the SX1 has 12MHz input clock */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -140,17 +138,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 6ad4a6befe..06adc947b0 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -49,8 +49,6 @@ /* input clock of PLL (VCMA9 has 12MHz input clock) */ #define CONFIG_SYS_CLK_FREQ 12000000 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -191,16 +189,6 @@ #define CONFIG_IDENT_STRING "\n(c) 2003 - 2011 by MPL AG Switzerland, " \ "MEV-10080-001 " VERSION_TAG -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h index a2b347a828..5a8d01009a 100644 --- a/include/configs/a320evb.h +++ b/include/configs/a320evb.h @@ -39,8 +39,6 @@ /* * CPU and Board Configuration Options */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #undef CONFIG_SKIP_LOWLEVEL_INIT /* @@ -105,17 +103,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - -/* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) diff --git a/include/configs/actux1.h b/include/configs/actux1.h index bdd2239d8e..de29eb9ef2 100644 --- a/include/configs/actux1.h +++ b/include/configs/actux1.h @@ -105,12 +105,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113842 diff --git a/include/configs/actux2.h b/include/configs/actux2.h index c55571c128..d2cc26c2a2 100644 --- a/include/configs/actux2.h +++ b/include/configs/actux2.h @@ -98,12 +98,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113042 diff --git a/include/configs/actux3.h b/include/configs/actux3.h index 78ee2b598f..7165db09b0 100644 --- a/include/configs/actux3.h +++ b/include/configs/actux3.h @@ -96,13 +96,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113442 diff --git a/include/configs/actux4.h b/include/configs/actux4.h index c1105df595..c34dca2c2d 100644 --- a/include/configs/actux4.h +++ b/include/configs/actux4.h @@ -103,12 +103,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113003 diff --git a/include/configs/adp-ag101.h b/include/configs/adp-ag101.h index 6bf0addcb5..b6e3844699 100644 --- a/include/configs/adp-ag101.h +++ b/include/configs/adp-ag101.h @@ -145,13 +145,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/* * Size of malloc() pool */ /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index 747d061001..ef55e35564 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -145,13 +145,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/* * Size of malloc() pool */ /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h index 35f88cc39d..eea44db356 100644 --- a/include/configs/adp-ag102.h +++ b/include/configs/adp-ag102.h @@ -219,13 +219,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/* * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 6715cb4b11..041ca219da 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -170,9 +170,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif #endif diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index d0fbc88214..a3752bca67 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -17,32 +17,84 @@ #define __CONFIG_AM335X_EVM_H #define CONFIG_AM33XX -#define CONFIG_CMD_MEMORY /* for mtest */ -#undef CONFIG_GZIP -#undef CONFIG_ZLIB -#undef CONFIG_SYS_HUSH_PARSER -#undef CONFIG_CMD_NET #include <asm/arch/cpu.h> #include <asm/arch/hardware.h> -#define CONFIG_ENV_SIZE 0x400 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 * 1024)) +#define CONFIG_DMA_COHERENT +#define CONFIG_DMA_COHERENT_SIZE (1 << 20) + +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "U-Boot# " #define CONFIG_SYS_NO_FLASH #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM +#define CONFIG_OF_LIBFDT +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* commands to include */ +#include <config_cmd_default.h> + #define CONFIG_CMD_ASKENV #define CONFIG_VERSION_VARIABLE /* set to negative value for no autoboot */ #define CONFIG_BOOTDELAY 3 -#define CONFIG_SYS_AUTOLOAD "no" -#define CONFIG_BOOTFILE "uImage" #define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=yes\0" \ - "ramdisk_file=ramdisk.gz\0" \ + "loadaddr=0x80200000\0" \ + "fdtaddr=0x80F80000\0" \ + "rdaddr=0x81000000\0" \ + "bootfile=/boot/uImage\0" \ + "console=ttyO0,115200n8\0" \ + "optargs=\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ + "ramrootfstype=ext2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "ramargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ + "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ + "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ + "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "ramboot=echo Booting from ramdisk ...; " \ + "run ramargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan ${mmcdev}; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot;" \ + "fi;" \ + "fi;" \ /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ @@ -82,14 +134,21 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 +#define CONFIG_SPI +#define CONFIG_OMAP3_SPI +#define CONFIG_MTD_DEVICE +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED (24000000) + /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ -#define PHYS_DRAM_1_SIZE 0x10000000 /*(0x80000000 / 8) 256 MB */ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ @@ -109,7 +168,15 @@ #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_I2C_MULTI_BUS #define CONFIG_DRIVER_OMAP24XX_I2C +#define CONFIG_CMD_EEPROM +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_MULTI_EEPROMS + +#define CONFIG_OMAP_GPIO #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ @@ -128,7 +195,7 @@ #define CONFIG_SPL #define CONFIG_SPL_TEXT_BASE 0x402F0400 #define CONFIG_SPL_MAX_SIZE (46 * 1024) -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SPL_BSS_START_ADDR 0x80000000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ @@ -145,6 +212,7 @@ #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_YMODEM_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" @@ -165,7 +233,21 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif -/* Unsupported features */ -#undef CONFIG_USE_IRQ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_DRIVER_TI_CPSW +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC #endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 54ab3ebd3f..f24b44d5e8 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -47,7 +47,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -256,13 +255,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index ed0a601df2..95f8d78854 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -47,7 +47,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -253,13 +252,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index aebca71ec3..b8ca8a849f 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -66,7 +66,6 @@ /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ #define CONFIG_SYS_CLK_FREQ V_SCLK -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -207,13 +206,6 @@ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */ diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h new file mode 100644 index 0000000000..af0b714e11 --- /dev/null +++ b/include/configs/apx4devkit.h @@ -0,0 +1,236 @@ +/* + * Copyright (C) 2012 Bluegiga Technologies Oy + * + * Authors: + * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com> + * Lauri Hintsala <lauri.hintsala@bluegiga.com> + * + * Based on m28evk.h: + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* SoC configurations */ +#define CONFIG_MX28 /* i.MX28 SoC */ +#define CONFIG_MXS_GPIO /* GPIO control */ +#define CONFIG_SYS_HZ 1000 /* Ticks per second */ + +#define MACH_TYPE_APX4DEVKIT 3712 +#define CONFIG_MACH_TYPE MACH_TYPE_APX4DEVKIT + +#include <asm/arch/regs-base.h> + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_ARCH_MISC_INIT + +/* SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NO_CPU_SUPPORT_CODE +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT + +/* U-Boot Commands */ +#include <config_cmd_default.h> +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_USB + +/* Memory configurations */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x40000000 /* Base address */ +#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ +#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ +#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* Point initial SP in SRAM so SPL can use it too. */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000 +#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* + * We need to sacrifice first 4 bytes of RAM here to avoid triggering some + * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot + * binary. In case there was more of this mess, 0x100 bytes are skipped. + */ +#define CONFIG_SYS_TEXT_BASE 0x40000100 + +#define CONFIG_ENV_OVERWRITE + +/* U-Boot general configurations */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-Boot version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc. */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_OF_LIBFDT +#define CONFIG_ENV_IS_IN_NAND + +/* Serial Driver */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* DMA */ +#define CONFIG_APBH_DMA + +/* MMC Driver */ +#ifdef CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (256 * 1024) +#define CONFIG_ENV_SIZE (16 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#endif + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC_BOUNCE_BUFFER +#define CONFIG_MXS_MMC +#endif + +/* NAND Driver */ +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_RANGE (384 * 1024) +#define CONFIG_ENV_OFFSET 0x120000 +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) +#endif + +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MXS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x60000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE + +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=gpmi-nand:128k(bootstrap),1024k(boot),768k(env),-(root)" +#else +#define MTDPARTS_DEFAULT "" +#endif + +/* Ethernet on SOC (FEC) */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_PHYADDR 0 +#define IMX_FEC_BASE MXS_ENET0_BASE +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY +#define CONFIG_FEC_XCV_TYPE RMII +#endif + +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT 1 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + +/* I2C */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_I2C_MXS +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 400000 +#endif + +/* RTC */ +#if defined(CONFIG_CMD_DATE) +#define CONFIG_RTC_PCF8563 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 +#endif + +/* Boot Linux */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 1 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTCOMMAND "run bootcmd_nand" +#define CONFIG_LOADADDR 0x41000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SERIAL_TAG +#define CONFIG_REVISION_TAG + +/* Extra Environments */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "verify=no\0" \ + "bootcmd=run bootcmd_nand\0" \ + "kernelargs=console=tty0 console=ttyAMA0,115200 consoleblank=0\0" \ + "bootargs_nand=" \ + "setenv bootargs ${kernelargs} ubi.mtd=3,2048 " \ + "root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \ + "bootcmd_nand=" \ + "run bootargs_nand && ubi part root 2048 && " \ + "ubifsmount rootfs && ubifsload 41000000 boot/uImage && " \ + "bootm 41000000\0" \ + "bootargs_mmc=" \ + "setenv bootargs ${kernelargs} " \ + "root=/dev/mmcblk0p2 rootwait ${mtdparts} rw\0" \ + "bootcmd_mmc=" \ + "run bootargs_mmc && mmc rescan && " \ + "ext2load mmc 0:2 41000000 boot/uImage && bootm 41000000\0" \ +"" + +#endif /* __CONFIG_H */ diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index 2abcaffeef..bf20065afd 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -224,7 +224,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE SZ_32K /* regular stack */ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* Unsure if to big or to small*/ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* Unsure if to big or to small*/ #endif /* __AT91RM9200EK_CONFIG_H__ */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index ef25fa5e0c..f921fac64d 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -55,7 +55,6 @@ /* Misc CPU related */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -237,10 +236,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 014437b5e0..1e1fbe56d7 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -40,9 +40,6 @@ #include <asm/hardware.h> -#define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -239,10 +236,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 4309f71f16..9421b5373c 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -47,7 +47,6 @@ #define CONFIG_AT91SAM9263EK 1 /* It's an AT91SAM9263EK Board */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -165,7 +164,7 @@ "update=" \ "protect off ${monitor_base} +${filesize};" \ "erase ${monitor_base} +${filesize};" \ - "cp.b ${load_addr} ${monitor_base} ${filesize};" \ + "cp.b ${fileaddr} ${monitor_base} ${filesize};" \ "protect on ${monitor_base} +${filesize}\0" #ifndef CONFIG_SKIP_LOWLEVEL_INIT @@ -353,8 +352,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#undef CONFIG_USE_IRQ - #endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 1d5fc8f73e..4ca280a7ff 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -39,8 +39,6 @@ #define CONFIG_AT91SAM9M10G45EK #define CONFIG_AT91FAMILY -#define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -179,10 +177,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index c5952e9319..8178b32a84 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -41,7 +41,6 @@ #define CONFIG_ARCH_CPU_INIT #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -189,8 +188,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#undef CONFIG_USE_IRQ - #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h new file mode 100644 index 0000000000..1ceb31a0f4 --- /dev/null +++ b/include/configs/at91sam9x5ek.h @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2012 Atmel Corporation + * + * Configuation settings for the AT91SAM9X5EK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H__ +#define __CONFIG_H__ + +#include <asm/hardware.h> + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_AT91SAM9X5EK +#define CONFIG_AT91FAMILY + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_LCD_LOGO +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_HLCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SF + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* DataFlash */ +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#endif + +/* no NOR flash */ +#define CONFIG_SYS_NO_FLASH + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 + +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC 1 +#define CONFIG_ATMEL_NAND_HW_PMECC 1 +#define CONFIG_PMECC_CAP 2 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 + +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +/* Ethernet */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x26e00000 + +#ifdef CONFIG_SYS_USE_NANDFLASH +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read " \ + "0x22000000 0x200000 0x300000; " \ + "bootm 0x22000000" +#else +#ifdef CONFIG_SYS_USE_SPIFLASH +/* bootstrap + u-boot + env + linux in spi flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x5000 +#define CONFIG_ENV_SIZE 0x3000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_ENV_SPI_MAX_HZ 30000000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x22000000 0x100000 0x300000; " \ + "bootm 0x22000000" +#endif +#endif + +#define CONFIG_BOOTARGS "mem=128M console=ttyS0,115200 " \ + "mtdparts=atmel_nand:" \ + "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock1 rw " \ + "rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs" + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ + + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index 97fdc2c9c6..756f40956b 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -102,15 +102,6 @@ #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ /* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* * DRAM Map */ #define CONFIG_NR_DRAM_BANKS 3 /* 2 banks of DRAM */ diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h index 14b81460b7..312fd947be 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/ca9x4_ct_vxp.h @@ -105,13 +105,6 @@ #define LINUX_BOOT_PARAM_ADDR 0x60000200 #define CONFIG_BOOTDELAY 2 -/* Stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 0x60000000 /* SDRAM Bank #1 */ diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 8141fd796f..5c2b35d584 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -161,7 +161,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (16 << 20)) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 771ac9c3b1..91ab812840 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -146,7 +146,6 @@ #define CONFIG_MX_CYCLIC /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "cam_enc_4xx> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -191,7 +190,6 @@ #define CONFIG_TIMESTAMP /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* test 16MB RAM */ diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index 408e91832b..d2fd72a4a5 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -31,8 +31,6 @@ #define CONFIG_KS8695 1 /* it is a KS8695 CPU */ #define CONFIG_CM4008 1 /* it is an OpenGear CM4008 boad */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 @@ -96,17 +94,6 @@ #define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */ /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index d85a6001a2..0e7a217433 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -31,8 +31,6 @@ #define CONFIG_KS8695 1 /* it is a KS8695 CPU */ #define CONFIG_CM41xx 1 /* it is an OpenGear CM41xx boad */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 @@ -96,17 +94,6 @@ #define CONFIG_SYS_HZ (1000) /* 1ms resolution ticks */ /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index ee4bce5d34..46c556ddc8 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -37,6 +37,7 @@ */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ +#define CONFIG_OMAP_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -56,7 +57,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 @@ -278,13 +278,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */ diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 1f02f3feef..ae84344e47 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -117,17 +117,6 @@ #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - -/* * DRAM Map */ #define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index a877066c4b..d65415a62c 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -51,7 +51,6 @@ #define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_BOARD_EARLY_INIT_F @@ -511,10 +510,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32 * 1024) - -#if defined(CONFIG_USE_IRQ) -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h index dc676dffdb..15d56c346d 100644 --- a/include/configs/cpuat91.h +++ b/include/configs/cpuat91.h @@ -46,7 +46,6 @@ #define CONFIG_ARM920T #define CONFIG_AT91RM9200 #define CONFIG_CPUAT91 -#undef CONFIG_USE_IRQ #define USE_920T_MMU #include <asm/hardware.h> /* needed for port definitions */ @@ -211,15 +210,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32 * 1024) -#define CONFIG_STACKSIZE_IRQ (4 * 1024) -#define CONFIG_STACKSIZE_FIQ (4 * 1024) - - -#if defined(CONFIG_USE_IRQ) -#error CONFIG_USE_IRQ not supported -#endif - #define CONFIG_DEVICE_NULLDEV #define CONFIG_SILENT_CONSOLE diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 51dc6643d9..f7ac256a0f 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -53,7 +53,6 @@ #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ (32 << 20)) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info @@ -157,7 +156,6 @@ /* * U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #undef CONFIG_MISC_INIT_R #undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index e6adb1fe51..09a9660929 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -27,7 +27,10 @@ * Board */ #define CONFIG_DRIVER_TI_EMAC +/* check if direct NOR boot config is used */ +#ifndef CONFIG_DIRECT_NOR_BOOT #define CONFIG_USE_SPIFLASH +#endif /* @@ -43,10 +46,19 @@ #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_TEXT_BASE 0xc1080000 #define CONFIG_SYS_DA850_PLL_INIT #define CONFIG_SYS_DA850_DDR_INIT +#ifdef CONFIG_DIRECT_NOR_BOOT +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DA8XX_GPIO +#define CONFIG_SYS_TEXT_BASE 0x60000000 +#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11) +#define CONFIG_DA850_LOWLEVEL +#else +#define CONFIG_SYS_TEXT_BASE 0xc1080000 +#endif + /* * Memory Info */ @@ -62,7 +74,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ @@ -154,6 +165,16 @@ #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#ifdef CONFIG_USE_SPIFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 +#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 +#endif + /* * I2C Configuration */ @@ -182,6 +203,32 @@ #define CONFIG_SYS_ALE_MASK 0x8 #undef CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x28000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000 +#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST +#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ + CONFIG_SYS_NAND_U_BOOT_SIZE - \ + CONFIG_SYS_MALLOC_LEN - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_NAND_ECCPOS { \ + 24, 25, 26, 27, 28, \ + 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ + 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ + 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ + 59, 60, 61, 62, 63 } +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 10 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_NAND_LOAD #endif /* @@ -311,13 +358,28 @@ #undef CONFIG_CMD_ENV #endif +/* SD/MMC configuration */ +#ifndef CONFIG_USE_NOR +#define CONFIG_MMC +#define CONFIG_DAVINCI_MMC_SD1 +#define CONFIG_GENERIC_MMC +#define CONFIG_DAVINCI_MMC +#endif + +/* + * Enable MMC commands only when + * MMC support is present + */ +#ifdef CONFIG_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#endif + +#ifndef CONFIG_DIRECT_NOR_BOOT /* defines for SPL */ #define CONFIG_SPL -#define CONFIG_SPL_SPI_SUPPORT -#define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT @@ -325,11 +387,25 @@ #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_SIZE 32768 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 -#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 +#endif + +/* Load U-Boot Image From MMC */ +#ifdef CONFIG_SPL_MMC_LOAD +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SYS_MMC_U_BOOT_OFFS 0x75 +#define CONFIG_SYS_MMC_U_BOOT_SIZE 0x30000 +#undef CONFIG_SPL_SPI_LOAD +#endif /* additions for new relocation code, must added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 + +#ifdef CONFIG_DIRECT_NOR_BOOT +#define CONFIG_SYS_INIT_SP_ADDR 0x8001ff00 +#else #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ GENERATED_GBL_DATA_SIZE) +#endif /* CONFIG_DIRECT_NOR_BOOT */ #endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index a30d24c29b..de795a2ae2 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -131,7 +131,6 @@ #define CONFIG_MX_CYCLIC /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "DM355 EVM # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -170,7 +169,6 @@ #define CONFIG_NET_RETRY_COUNT 10 /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 1cd3d2eae7..88e6673837 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -99,7 +99,6 @@ #define CONFIG_MX_CYCLIC /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "DM355 LEOPARD # " #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -130,7 +129,6 @@ #define CONFIG_NET_RETRY_COUNT 10 /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index bcf10ca55e..6a331aa9f5 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -165,7 +165,6 @@ #define CONFIG_MX_CYCLIC /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "DM36x EVM # " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -202,7 +201,6 @@ #define CONFIG_TIMESTAMP /* U-Boot memory configuration */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ #define CONFIG_SYS_MEMTEST_START 0x87000000 /* physical address */ #define CONFIG_SYS_MEMTEST_END 0x88000000 /* test 16MB RAM */ diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 6734ea3190..366c77f010 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -54,7 +54,6 @@ extern unsigned int davinci_arm_clk_get(void); #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */ @@ -108,7 +107,6 @@ extern unsigned int davinci_arm_clk_get(void); #endif /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_PROMPT "DM6467 EVM > " /* Monitor Command Prompt */ diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index e4443ec89e..ab9cedd077 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -74,7 +74,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ @@ -157,7 +156,6 @@ /*==============================*/ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R #undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 93df4ffe3c..8eb7af921c 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ #define DDR_4BANKS /* 4-bank DDR2 (128MB) */ @@ -101,7 +100,6 @@ /*==============================*/ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R #undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 23b0ba7003..958b19ad30 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ #define DDR_4BANKS /* 4-bank DDR2 (128MB) */ @@ -88,7 +87,6 @@ #define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ #define CONFIG_SYS_I2C_PCA9543_ENABLE_CH0 0x01 /* Enable channel 0. */ /* U-Boot general configuration */ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds. */ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 36a8c0668a..3d8d392e87 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -76,7 +76,6 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest start address */ #define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ #define PHYS_SDRAM_1 0x80000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ #define DDR_4BANKS /* 4-bank DDR2 (128MB) */ @@ -147,7 +146,6 @@ /*==============================*/ /* U-Boot general configuration */ /*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ #define CONFIG_MISC_INIT_R #undef CONFIG_BOOTDELAY #define CONFIG_BOOTFILE "uImage" /* Boot file name */ diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 9f15ffb0fd..18d7374ba9 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -41,7 +41,6 @@ * Memory configurations */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_STACKSIZE SZ_32K #define CONFIG_SYS_MALLOC_LEN SZ_1M #define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 037a5bb326..de75dafc97 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -36,6 +36,8 @@ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ #define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 +#define CONFIG_OMAP_GPIO + /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM * 64 bytes before this address should be set aside for u-boot.img's @@ -57,7 +59,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -274,9 +275,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 @@ -313,6 +311,7 @@ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_MMC_SUPPORT diff --git a/include/configs/dig297.h b/include/configs/dig297.h index 4845d5198a..dda758269a 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -45,6 +45,7 @@ */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ +#define CONFIG_OMAP_GPIO #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -63,7 +64,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -259,17 +259,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h index 4eda91e7f4..a2af1e37fe 100644 --- a/include/configs/dvlhost.h +++ b/include/configs/dvlhost.h @@ -104,13 +104,6 @@ 115200, 230400 } #define CONFIG_SERIAL_RTS_ACTIVE 1 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - /* Expansion bus settings */ #define CONFIG_SYS_EXP_CS0 0xbd113442 diff --git a/include/configs/ea20.h b/include/configs/ea20.h index a9caa814d5..337d504923 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -65,7 +65,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 4d8be2b01e..d4104de5f2 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -61,8 +61,6 @@ #define CONFIG_SYS_PBSIZE \ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - /* * ARM asynchronous clock */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 6a67aa572c..f0fb48828a 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -228,7 +228,6 @@ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_STACKSIZE 0x00100000 #define CONFIG_SYS_LOAD_ADDR 0x00800000 #define CONFIG_SYS_MEMTEST_START 0x00400000 #define CONFIG_SYS_MEMTEST_END 0x007fffff diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index b99492c05b..e2e0d5c2d0 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -71,7 +71,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index f89e9ead92..14a0f02c5e 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -48,13 +48,12 @@ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ #define CONFIG_SYS_HZ 1000 -#undef CONFIG_USE_IRQ /* Running w/o interrupts */ /* 32kB internal SRAM */ #define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ #define CONFIG_SRAM_SIZE (32 << 10) -#define CONFIG_STACKSIZE (CONFIG_SRAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_STACKSIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) /* 128MB SDRAM in 1 bank */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 46939d4356..4350518939 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -146,14 +146,6 @@ #define CONFIG_SYS_HZ 1000 - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Physical Memory Map */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index df5265a5a0..d0555c1630 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -25,24 +25,24 @@ #define __CONFIG_H #include <asm/sizes.h> -#include "tegra2-common.h" +#include "tegra20-common.h" /* Enable fdt support for Harmony. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-harmony +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-harmony #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* High-level configuration options */ -#define V_PROMPT "Tegra2 (Harmony) # " -#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Harmony" +#define V_PROMPT "Tegra20 (Harmony) # " +#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Harmony" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTD +#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: keyboard satellite board UART, default */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -#ifdef CONFIG_TEGRA2_ENABLE_UARTA +#ifdef CONFIG_TEGRA20_ENABLE_UARTA /* UARTA: debug board UART */ #define CONFIG_SYS_NS16550_COM2 NV_PA_APB_UARTA_BASE #endif @@ -80,6 +80,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra2-common-post.h" +#include "tegra20-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index c6e9ce5576..73ab4c8375 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -43,6 +43,7 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_AIS_CONFIG_FILE "board/$(BOARDDIR)/hawkboard-ais-nand.cfg" #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ DAVINCI_SYSCFG_SUSPSRC_EMAC | \ @@ -86,7 +87,6 @@ #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ /* * Serial Driver info @@ -136,7 +136,7 @@ #define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_OFFS 0xe0000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000 #define CONFIG_SYS_NAND_U_BOOT_DST 0xc1180000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ @@ -157,6 +157,16 @@ #endif /* CONFIG_SYS_USE_NAND */ +/* USB Configs */ +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_USB_OHCI_NEW +#define CONFIG_USB_OHCI_DA8XX +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x01E25000 +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "hawkboard" + /* * U-Boot general configuration */ @@ -199,6 +209,8 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_USB +#define CONFIG_CMD_EXT2 #ifdef CONFIG_CMD_BDI #define CONFIG_CLOCKS diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 897bc3937c..62cc08cebd 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -95,17 +95,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x800000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index 88e2e3a1d5..5468a1a210 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -30,6 +30,7 @@ */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -105,7 +106,12 @@ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ +#ifdef CONFIG_BOOT_ONENAND #define CONFIG_CMD_ONENAND /* ONENAND support */ +#endif +#ifdef CONFIG_BOOT_NAND +#define CONFIG_CMD_NAND +#endif #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING @@ -135,14 +141,14 @@ "usbtty=cdc_acm\0" \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ - "console=ttyS2,115200n8\0" \ + "console=ttyO2,115200n8\0" \ "mpurate=auto\0" \ "vram=12M\0" \ "dvimode=1024x768MR-16@60\0" \ "defaultdisplay=dvi\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ + "mmcrootfstype=ext4 rootwait\0" \ "nandroot=/dev/mtdblock4 rw\0" \ "nandrootfstype=jffs2\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -225,13 +231,6 @@ #define CONFIG_SYS_HZ 1000 /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/* * Physical Memory Map * */ @@ -244,6 +243,7 @@ * FLASH and environment organization */ +#ifdef CONFIG_BOOT_ONENAND #define PISMO1_ONEN_SIZE GPMC_SIZE_128M /* Configure the PISMO */ #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP @@ -253,6 +253,19 @@ #define CONFIG_ENV_IS_IN_ONENAND 1 #define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ #define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET +#endif + +#ifdef CONFIG_BOOT_NAND +#define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */ +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_BASE NAND_BASE +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */ +#define CONFIG_ENV_ADDR NAND_ENV_OFFSET +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* * Size of malloc() pool @@ -268,6 +281,11 @@ #define CONFIG_SMC911X_BASE 0x2C000000 #endif /* (CONFIG_CMD_NET) */ +/* + * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader + * and older u-boot.bin with the new U-Boot SPL. + */ +#define CONFIG_SYS_TEXT_BASE 0x80008000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 @@ -275,4 +293,64 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) +/* SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_TEXT_BASE 0x40200800 +#define CONFIG_SPL_MAX_SIZE (54 * 1024) +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + +/* move malloc and bss high to prevent clashing with the main image */ +#define CONFIG_SYS_SPL_MALLOC_START 0x87000000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 +#define CONFIG_SPL_BSS_START_ADDR 0x87080000 /* end of minimum RAM */ +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +/* MMC boot config */ +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +#ifdef CONFIG_BOOT_ONENAND +#define CONFIG_SPL_ONENAND_SUPPORT + +/* OneNAND boot config */ +#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000 +#define CONFIG_SYS_ONENAND_PAGE_SIZE 2048 +#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000 +#define CONFIG_SPL_ONENAND_LOAD_SIZE \ + (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR) + +#endif + +#ifdef CONFIG_BOOT_NAND +#define CONFIG_SPL_NAND_SUPPORT + +/* NAND boot config */ +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13} +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#endif + #endif /* __IGEP00X0_H */ diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index 17fa4a13d3..567061aee3 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -133,9 +133,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE_ADDR diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 7d2876b9c5..a2853a7ef9 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -94,7 +94,6 @@ #define CONFIG_SYS_MEMTEST_START 0xA0000000 #define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ #define PHYS_SDRAM_1 0xA0000000 /* DDR Start */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ @@ -162,6 +161,11 @@ #define CONFIG_DOS_PARTITION /* + * GPIO + */ +#define CONFIG_MXC_GPIO + +/* * MTD partitions */ #define CONFIG_CMD_MTDPARTS diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index a340e97f00..8cca478578 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -139,13 +139,6 @@ #define CONFIG_CMDLINE_EDITING 1 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index a412cf61ee..b21621ca9e 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -143,13 +143,6 @@ #define CONFIG_CMDLINE_EDITING /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 2252d93833..2770c82b59 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -102,17 +102,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index ca2d92d79f..d5043df6f0 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -113,17 +113,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index 2badadbc3b..7b9d36d5df 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -32,7 +32,6 @@ #define CONFIG_SYS_TEXT_BASE 0x10000000 #define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET @@ -204,8 +203,6 @@ #define CONFIG_SYS_MALLOC_LEN (10 << 20) #define CONFIG_SYS_MEM_TOP_HIDE (4 << 20) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - /* * Clock reset generator init */ @@ -292,8 +289,4 @@ #define CONFIG_SYS_DDR2_INIT_DRIC1_10 0x0005 #define CONFIG_SYS_DDR2_INIT_DRIC2_10 0x0002 -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/jornada.h b/include/configs/jornada.h index 84ad2d874c..d499abe4af 100644 --- a/include/configs/jornada.h +++ b/include/configs/jornada.h @@ -33,7 +33,6 @@ /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF -#undef CONFIG_USE_IRQ /* Console setting */ @@ -88,12 +87,6 @@ #define CONFIG_SYS_CPUSPEED 0x0a /* core clock 206MHz */ #define CONFIG_SYS_BAUDRATE_TABLE { 19200, 38400, 57600, 115200 } -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_FLASH_CFI_WIDTH FLASH_CFI_32BIT diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 0d5ecd5588..27b77d3dab 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -158,7 +158,6 @@ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ #define CONFIG_NR_DRAM_BANKS 4 -#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ /* diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index 4b9b290826..0a1d1e09a6 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -44,7 +44,6 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_DOS_PARTITION #define CONFIG_SYS_TEXT_BASE 0x0 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF @@ -136,17 +135,6 @@ #endif /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 3ee538a441..d0f2b481d5 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -20,8 +20,6 @@ #ifndef __M28EVK_CONFIG_H__ #define __M28EVK_CONFIG_H__ -#include <asm/arch/regs-base.h> - /* * SoC configurations */ @@ -36,9 +34,9 @@ #define CONFIG_MACH_TYPE MACH_TYPE_M28EVK +#include <asm/arch/regs-base.h> + #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_ARCH_MISC_INIT @@ -47,8 +45,8 @@ */ #define CONFIG_SPL #define CONFIG_SPL_NO_CPU_SUPPORT_CODE -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mx28" -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds" +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT @@ -85,7 +83,6 @@ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ -#define CONFIG_STACKSIZE (128 * 1024) /* 128 KB stack */ #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */ #define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ @@ -246,6 +243,7 @@ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI #define CONFIG_MXS_SPI +#define CONFIG_MXS_SPI_DMA_ENABLE #define CONFIG_SPI_HALF_DUPLEX #define CONFIG_DEFAULT_SPI_BUS 2 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 @@ -256,11 +254,11 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_SF_DEFAULT_CS 2 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 -#define CONFIG_SF_DEFAULT_SPEED 24000000 +#define CONFIG_SF_DEFAULT_SPEED 40000000 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_BUS 2 -#define CONFIG_ENV_SPI_MAX_HZ 24000000 +#define CONFIG_ENV_SPI_MAX_HZ 40000000 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 #endif #endif diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 970c882d3c..733022e785 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -27,9 +27,11 @@ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP3_MCX /* working with mcx */ +#define CONFIG_OMAP_GPIO #define MACH_TYPE_MCX 3656 #define CONFIG_MACH_TYPE MACH_TYPE_MCX +#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_CACHELINE_SIZE 64 @@ -140,6 +142,7 @@ #define CONFIG_MTD_PARTITIONS #define CONFIG_MTD_DEVICE #define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_GPIO #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ @@ -183,38 +186,95 @@ #define CONFIG_BOOTFILE "uImage" +#define xstr(s) str(s) +#define str(s) #s + +/* Setup MTD for NAND on the SOM */ +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(MLO)," \ + "1m(u-boot),256k(env1)," \ + "256k(env2),6m(kernel),6m(k_recovery)," \ + "8m(fs_recovery),-(common_data)" + +#define CONFIG_HOSTNAME mcx #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "root=/dev/mmcblk0p2 rw " \ - "rootfstype=ext3 rootwait\0" \ - "nandargs=setenv bootargs console=${console} " \ - "root=/dev/mtdblock4 rw " \ - "rootfstype=jffs2\0" \ - "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} 280000 400000; " \ - "bootm ${loadaddr}\0" \ + "adddbg=setenv bootargs ${bootargs} trace_buf_size=64M\0" \ + "adddebug=setenv bootargs ${bootargs} earlyprintk=serial\0" \ + "addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \ + "addfb=setenv bootargs ${bootargs} vram=6M " \ + "omapfb.vram=1:2M,2:2M,3:2M omapdss.def_disp=lcd\0" \ + "addip_sta=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:eth0:off\0" \ + "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ + "addip=if test -n ${ipdyn};then run addip_dyn;" \ + "else run addip_sta;fi\0" \ + "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ + "addtty=setenv bootargs ${bootargs} " \ + "console=${consoledev},${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "baudrate=115200\0" \ + "consoledev=ttyO2\0" \ + "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ + "loadaddr=0x82000000\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "load_k=tftp ${loadaddr} ${bootfile}\0" \ + "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \ + "loadmlo=tftp ${loadaddr} ${mlo}\0" \ + "mlo=" xstr(CONFIG_HOSTNAME) "/MLO\0" \ + "mmcargs=root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "run addip addtty addmtd addfb addeth addmisc;" \ + "run loaduimage; " \ + "bootm ${loadaddr}\0" \ + "net_nfs=run load_k; " \ + "run nfsargs; " \ + "run addip addtty addmtd addfb addeth addmisc;" \ + "bootm ${loadaddr}\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.img\0" \ + "uboot_addr=0x80000\0" \ + "update=nandecc sw;nand erase ${uboot_addr} 100000;" \ + "nand write ${loadaddr} ${uboot_addr} 80000\0" \ + "updatemlo=nandecc hw;nand erase 0 20000;" \ + "nand write ${loadaddr} 0 20000\0" \ + "upd=if run load;then echo Updating u-boot;if run update;" \ + "then echo U-Boot updated;" \ + "else echo Error updating u-boot !;" \ + "echo Board without bootloader !!;" \ + "fi;" \ + "else echo U-Boot not downloaded..exiting;fi\0" \ + "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "nandargs=setenv bootargs ubi.mtd=7 " \ + "root=ubi0:rootfs rootfstype=ubifs\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "ubi part nand0,4;" \ + "ubi readvol ${loadaddr} kernel;" \ + "run addip addtty addmtd addfb addeth addmisc;" \ + "bootm ${loadaddr}\0" \ + "swupdate_args=setenv bootargs ubi.mtd=6 root=ubi0:fs_recovery "\ + "rootfstype=ubifs quiet loglevel=1 " \ + "consoleblank=0 ${swupdate_misc}\0" \ + "swupdate=echo Running Sw-Update...;" \ + "if printenv mtdparts;then echo Starting SwUpdate...; " \ + "else mtdparts default;fi; " \ + "ubi part nand0,5;" \ + "ubi readvol 0x82000000 kernel_recovery;" \ + "run swupdate_args; " \ + "setenv bootargs ${bootargs} " \ + "${mtdparts} " \ + "vram=6M omapfb.vram=1:2M,2:2M,3:2M " \ + "omapdss.def_disp=lcd;" \ + "bootm ${loadaddr}\0" #define CONFIG_BOOTCOMMAND \ - "if mmc init; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi" + "run nandboot" #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING @@ -227,7 +287,7 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT V_PROMPT -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) @@ -253,13 +313,6 @@ #define CONFIG_SYS_HZ 1000 /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ @@ -279,18 +332,15 @@ #define CONFIG_NAND_OMAP_GPMC #define GPMC_NAND_ECC_LP_x16_LAYOUT #define CONFIG_ENV_IS_IN_NAND -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */ +/* Redundant Environment */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET - -/* - * CFI FLASH driver setup - */ -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) -#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + 2 * CONFIG_SYS_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE /* Flash banks JFFS2 should use */ #define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ diff --git a/include/configs/medcom.h b/include/configs/medcom.h index c84db03e76..bce03a49fa 100644 --- a/include/configs/medcom.h +++ b/include/configs/medcom.h @@ -26,20 +26,20 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include "tegra2-common.h" +#include "tegra20-common.h" /* Enable fdt support for Medcom. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-medcom +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-medcom #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* High-level configuration options */ -#define V_PROMPT "Tegra2 (Medcom) # " -#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Medcom" +#define V_PROMPT "Tegra20 (Medcom) # " +#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Medcom" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTD /* UARTD: debug UART */ +#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F @@ -78,6 +78,6 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" -#include "tegra2-common-post.h" +#include "tegra20-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 1e897e23e0..31f2a8cf13 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -68,7 +68,6 @@ #define CONFIG_REVISION_TAG #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_MISC_INIT_R /* Call misc_init_r */ -#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ #define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ @@ -221,10 +220,4 @@ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -# error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 27b489902b..7086d1d0e8 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -105,7 +105,6 @@ #define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */ #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */ #define CONFIG_DISPLAY_CPUINFO /* Display cpu info */ -#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */ #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h index 665e33d868..3ede042ade 100644 --- a/include/configs/mx1ads.h +++ b/include/configs/mx1ads.h @@ -35,7 +35,6 @@ #define CONFIG_ARM920T 1 /* This is an ARM920T Core */ #define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */ #define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* * Select serial console configuration @@ -133,17 +132,6 @@ #define CONFIG_SYS_CPUSPEED 0x141 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index efca287539..359a308305 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -49,9 +49,6 @@ #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2) #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE) -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Serial Info */ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index a4a22fc8a5..4e1e6bc0a8 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -19,20 +19,19 @@ #ifndef __MX28EVK_CONFIG_H__ #define __MX28EVK_CONFIG_H__ -#include <asm/arch/regs-base.h> - /* * SoC configurations */ #define CONFIG_MX28 /* i.MX28 SoC */ + #define CONFIG_MXS_GPIO /* GPIO control */ #define CONFIG_SYS_HZ 1000 /* Ticks per second */ #define CONFIG_MACH_TYPE MACH_TYPE_MX28EVK +#include <asm/arch/regs-base.h> + #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_ARCH_MISC_INIT @@ -41,8 +40,8 @@ */ #define CONFIG_SPL #define CONFIG_SPL_NO_CPU_SUPPORT_CODE -#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mx28" -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds" +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT @@ -76,7 +75,6 @@ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ -#define CONFIG_STACKSIZE (128 * 1024) /* 128 KB stack */ #define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ #define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ #define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ @@ -216,7 +214,6 @@ #define CONFIG_SF_DEFAULT_SPEED 24000000 /* (redundant) environemnt in SPI flash */ -#undef CONFIG_ENV_IS_IN_SPI_FLASH #ifdef CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_ENV_SIZE 0x1000 /* 4KB */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index cc720e8083..081fbf6905 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -155,13 +155,6 @@ #define CONFIG_CMDLINE_EDITING 1 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 7634de72cb..17d3143eba 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -151,13 +151,6 @@ #define CONFIG_CMDLINE_EDITING /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 6eb5da5d84..9bc6bd4470 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -160,14 +160,6 @@ #define CONFIG_SYS_HZ 1000 - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* * Physical Memory Map */ diff --git a/include/configs/efikamx.h b/include/configs/mx51_efikamx.h index 143b0f01f4..439b5f3fe2 100644 --- a/include/configs/efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -246,13 +246,6 @@ #define CONFIG_CMDLINE_EDITING /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index e975f549bd..ba4a4a623c 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -128,6 +128,8 @@ #define CONFIG_VIDEO_IPUV3 #define CONFIG_CFB_CONSOLE #define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_BMP_16BPP @@ -216,13 +218,6 @@ #define CONFIG_CMDLINE_EDITING /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index b486253533..6ab4cde489 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -153,9 +153,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CSD0_BASE_ADDR diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index d6aa46d7b9..b46855f7e4 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -88,6 +88,9 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DATE +/* Miscellaneous commands */ +#define CONFIG_CMD_BMODE + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 @@ -164,9 +167,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE_ADDR diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 597c4e45dd..8cbaf08e0e 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -175,9 +175,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CSD0_BASE_ADDR @@ -221,6 +218,8 @@ #define CONFIG_VIDEO_IPUV3 #define CONFIG_CFB_CONSOLE #define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_BMP_16BPP diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 1982184c86..f54d328be0 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -152,9 +152,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -/* Stack sizes */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CSD0_BASE_ADDR diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index a9c1b1545e..6c1789527c 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -140,7 +140,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 0d376ba5cf..72d0154d24 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -31,6 +31,7 @@ #define CONFIG_MACH_TYPE 3769 #include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS @@ -53,7 +54,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0|(GPIO_NUMBER(3, 19)<<8)) +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) #define CONFIG_SF_DEFAULT_SPEED 25000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #endif @@ -117,6 +118,9 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 +/* Miscellaneous commands */ +#define CONFIG_CMD_BMODE + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 @@ -194,7 +198,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index 37a66aba13..d438efdae6 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -85,12 +85,6 @@ #define CONFIG_SYS_TEXT_BASE 0x00000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + (1<<20)) -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -# define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -# define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - #define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h index f465a5606b..3f49c6f0b1 100644 --- a/include/configs/ns9750dev.h +++ b/include/configs/ns9750dev.h @@ -42,7 +42,6 @@ #define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4) #define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8) -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /*@TODO #define CONFIG_STATUS_LED*/ #define CONFIG_USE_IRQ @@ -126,10 +125,7 @@ /*----------------------------------------------------------------------- * Stack sizes - * - * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h index f591a86ab5..7a7fa227c0 100644 --- a/include/configs/omap1510inn.h +++ b/include/configs/omap1510inn.h @@ -38,8 +38,6 @@ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000 /* the OMAP1510 Innovator has 12MHz input clock */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -137,17 +135,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 13762ccaf1..1abf2590ef 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -61,7 +61,6 @@ /* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ #define CONFIG_SYS_CLK_FREQ V_SCLK -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -193,17 +192,6 @@ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE SZ_128K /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 657780edcf..782a4c5988 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -34,6 +34,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ +#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -50,7 +51,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 @@ -224,7 +224,7 @@ "bootfile=uImage.beagle\0" \ "console=ttyO2,115200n8\0" \ "mpurate=auto\0" \ - "buddy=none "\ + "buddy=none\0" \ "optargs=\0" \ "camera=none\0" \ "vram=12M\0" \ @@ -344,13 +344,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ @@ -420,6 +413,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 20192a90a7..d9578f47b0 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -22,14 +22,13 @@ */ #define CONFIG_OMAP /* This is TI OMAP core */ #define CONFIG_OMAP34XX /* belonging to 34XX family */ +#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */ #define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ #define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ -#undef CONFIG_USE_IRQ /* no support for IRQs */ - /* * Clock related definitions */ @@ -52,12 +51,6 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) /* - * Stack sizes - * These values are used in start.S - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/* * Physical Memory Map * Note 1: CS1 may or may not be populated * Note 2: SDRAM size is expected to be at least 32MB diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 2e1e6b901d..b975a6c9a4 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -33,8 +33,7 @@ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */ - -#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_OMAP_GPIO #define CONFIG_SYS_TEXT_BASE 0x80400000 @@ -286,13 +285,6 @@ #define CONFIG_SYS_HZ 1000 /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 6a1304681a..67af314652 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -39,6 +39,7 @@ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ #define CONFIG_MACH_TYPE MACH_TYPE_MVBLX +#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -55,7 +56,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 @@ -247,13 +247,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index d29b3266c0..dd4b2c0e88 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -25,6 +25,7 @@ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP3_OVERO /* working with overo */ +#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -41,7 +42,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -231,13 +231,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ @@ -325,6 +318,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 604b53d3cb..8a8a5d1cc0 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -29,6 +29,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_PANDORA 1 /* working with pandora */ +#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -45,7 +46,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -217,13 +217,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 1d8b0abf3d..2a890c9c7e 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -61,7 +61,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -293,13 +292,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ - #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 #define CONFIG_SYS_INIT_RAM_SIZE 0x800 diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 0f72ebe8eb..891e6f4363 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -51,7 +51,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -249,13 +248,6 @@ #define CONFIG_SYS_HZ 1000 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index b60ece3c53..4447dff00d 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -36,6 +36,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */ +#define CONFIG_OMAP_GPIO #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -52,7 +53,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ @@ -218,13 +218,6 @@ #define CONFIG_SYS_HZ ((V_SCLK) / (2 << CONFIG_SYS_PTV)) /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using these settings - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 2192c2b899..ee0c4b9d9b 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -35,6 +35,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP44XX 1 /* which is a 44XX */ #define CONFIG_OMAP4430 1 /* which is in a 4430 */ +#define CONFIG_OMAP_GPIO /* Get CPU defs */ #include <asm/arch/cpu.h> @@ -48,7 +49,6 @@ #define V_OSCK 38400000 /* Clock output from T2 */ #define V_SCLK V_OSCK -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 @@ -206,17 +206,6 @@ #define CONFIG_SYS_HZ 1000 /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ -#endif - -/* * SDRAM Memory Map * Even though we use two CS all the memory * is mapped to one contiguous block @@ -224,10 +213,7 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) #ifndef CONFIG_SYS_L2CACHE_OFF @@ -248,7 +234,7 @@ #define CONFIG_SPL #define CONFIG_SPL_TEXT_BASE 0x40304350 #define CONFIG_SPL_MAX_SIZE (38 * 1024) -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR /* * 64 bytes before this address should be set aside for u-boot.img's @@ -278,6 +264,7 @@ #define CONFIG_SPL_FAT_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" #define CONFIG_SYS_THUMB_BUILD diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 639d4a377e..40ca9bb98d 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -42,8 +42,6 @@ /* the OMAP5912 OSK has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 /* Required for ramdisk support */ @@ -139,17 +137,6 @@ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index c5874bbf67..4f0a6c1358 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -38,6 +38,7 @@ #define CONFIG_OMAP54XX /* which is a 54XX */ #define CONFIG_OMAP5430 /* which is in a 5430 */ #define CONFIG_5430EVM /* working with EVM */ +#define CONFIG_OMAP_GPIO /* Get CPU defs */ #include <asm/arch/cpu.h> @@ -51,7 +52,6 @@ #define V_OSCK 19200000 /* Clock output from T2 */ #define V_SCLK V_OSCK -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT @@ -209,17 +209,6 @@ #define CONFIG_SYS_HZ 1000 /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */ -#endif - -/* * SDRAM Memory Map * Even though we use two CS all the memory * is mapped to one contiguous block @@ -227,10 +216,7 @@ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS @@ -245,7 +231,7 @@ #define CONFIG_SPL #define CONFIG_SPL_TEXT_BASE 0x40300350 #define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h index f1cadb25fa..f24b765ee8 100644 --- a/include/configs/omap730p2.h +++ b/include/configs/omap730p2.h @@ -47,8 +47,6 @@ #define CONFIG_SYS_CLK_FREQ 13000000 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 @@ -148,18 +146,6 @@ #define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ - -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ diff --git a/include/configs/origen.h b/include/configs/origen.h index 172bf1472b..1ab983493e 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -116,9 +116,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ - /* ORIGEN has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ @@ -136,11 +133,6 @@ #undef CONFIG_CMD_IMLS #define CONFIG_IDENT_STRING " for ORIGEN" -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - #define CONFIG_CLK_1000_400_200 /* MIU (Memory Interleaving Unit) */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index 7abc42a4f5..fe4f3c0fa3 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -67,7 +67,6 @@ #define CONFIG_REVISION_TAG #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_MISC_INIT_R /* Call misc_init_r */ -#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ #define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ @@ -274,10 +273,4 @@ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -# error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 70b794db0f..835121ed3b 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -130,15 +130,6 @@ #define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ /* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* * DRAM Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 7cf2c63bd8..bc88354c4a 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -131,15 +131,6 @@ #define CONFIG_SYS_CPUSPEED 0x161 /* 400MHz;L=1 M=3 T=1 */ /* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* * DRAM Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 0dd1e83a50..0eb9f3b604 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -18,20 +18,20 @@ #define __CONFIG_H #include <asm/sizes.h> -#include "tegra2-common.h" +#include "tegra20-common.h" /* Enable fdt support for Paz00. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-paz00 +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-paz00 #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* High-level configuration options */ -#define V_PROMPT "Tegra2 (Paz00) MOD # " -#define CONFIG_TEGRA2_BOARD_STRING "Compal Paz00" +#define V_PROMPT "Tegra20 (Paz00) MOD # " +#define CONFIG_TEGRA20_BOARD_STRING "Compal Paz00" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTA +#define CONFIG_TEGRA20_ENABLE_UARTA #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 @@ -68,6 +68,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra2-common-post.h" +#include "tegra20-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 19b80d18e2..1e073177ed 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -118,17 +118,6 @@ #define CONFIG_IXP425_TIMER_CLK 66666666 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - /*************************************************************** * Platform/Board specific defines start here. ***************************************************************/ diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 9870590bd6..42291d4e28 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -26,20 +26,20 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include "tegra2-common.h" +#include "tegra20-common.h" /* Enable fdt support for Plutux. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-plutux +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-plutux #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* High-level configuration options */ -#define V_PROMPT "Tegra2 (Plutux) # " -#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Plutux" +#define V_PROMPT "Tegra20 (Plutux) # " +#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Plutux" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTD /* UARTD: debug UART */ +#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F @@ -78,6 +78,6 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" -#include "tegra2-common-post.h" +#include "tegra20-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index cdb3593c4f..ecc72b72d4 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261" #define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_SYS_TEXT_BASE 0 #define MACH_TYPE_PM9261 1187 @@ -380,10 +379,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index d202d0ad26..b60a9ade15 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263" #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_SYS_TEXT_BASE 0 #define MACH_TYPE_PM9263 1475 @@ -412,10 +411,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index c766330bb2..460933f79d 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -188,10 +188,4 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index f143ed003c..ce9e7d115d 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -66,8 +66,6 @@ #define CONFIG_DOS_PARTITION 1 #define CONFIG_BOARD_LATE_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF @@ -252,17 +250,6 @@ #endif /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/qong.h b/include/configs/qong.h index e824e17edd..485e1b1f04 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -212,12 +212,6 @@ #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_MISC_INIT_R -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ /*----------------------------------------------------------------------- * Physical Memory Map diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h new file mode 100644 index 0000000000..cf62e45e8b --- /dev/null +++ b/include/configs/rpi_b.h @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/sizes.h> + +/* Architecture, CPU, etc.*/ +#define CONFIG_ARM1176 +#define CONFIG_BCM2835 +#define CONFIG_ARCH_CPU_INIT +/* + * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, + * so 2708 has historically been used rather than a dedicated 2835 ID. + */ +#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708 + +/* Timer */ +#define CONFIG_SYS_HZ 1000000 + +/* Memory layout */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_TEXT_BASE 0x00008000 +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE +/* + * The board really has 256M. However, the VC (VideoCore co-processor) shares + * the RAM, and uses a configurable portion at the top. We tell U-Boot that a + * smaller amount of RAM is present in order to avoid stomping on the area + * the VC uses. + */ +#define CONFIG_SYS_SDRAM_SIZE SZ_128M +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_SDRAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_MALLOC_LEN SZ_4M +#define CONFIG_SYS_MEMTEST_START 0x00100000 +#define CONFIG_SYS_MEMTEST_END 0x00200000 + +/* Flash */ +#define CONFIG_SYS_NO_FLASH + +/* Devices */ +/* GPIO */ +#define CONFIG_BCM2835_GPIO + +/* Console UART */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 3000000 +#define CONFIG_PL01x_PORTS { (void *)0x20201000 } +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 + +/* Console configuration */ +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Environment */ +#define CONFIG_ENV_SIZE SZ_16K +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_LOAD_ADDR 0x1000000 + +/* Shell */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_MAXARGS 8 +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_COMMAND_HISTORY +#define CONFIG_AUTO_COMPLETE + +/* Commands */ +#include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_GPIO +/* Some things don't make sense on this HW or yet */ +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_SAVEENV + +/* Device tree support for bootm/bootz */ +#define CONFIG_OF_LIBFDT +/* ATAGs support for bootm/bootz */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +#endif diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 16be76457c..36f1a5700f 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -189,9 +189,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ - /* Goni has 3 banks of DRAM, but swap the bank */ #define CONFIG_NR_DRAM_BANKS 3 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 721301f954..7727624c67 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -214,9 +214,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */ - /* Universal has 2 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index 316e3fb925..4a1d25276e 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -182,10 +181,5 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif #endif diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h new file mode 100644 index 0000000000..0ebdfb8217 --- /dev/null +++ b/include/configs/sc_sps_1.h @@ -0,0 +1,208 @@ +/* + * SchulerControl GmbH, SC_SPS_1 module config + * + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * on behalf of DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __SC_SPS_1_H__ +#define __SC_SPS_1_H__ + +/* + * SoC configurations + */ +#define CONFIG_MX28 /* i.MX28 SoC */ +#define CONFIG_MXS_GPIO /* GPIO control */ +#define CONFIG_SYS_HZ 1000 /* Ticks per second */ + +/* + * Define SC_SPS_1 machine type by hand until it lands in mach-types + */ +#define MACH_TYPE_SC_SPS_1 4172 + +#define CONFIG_MACH_TYPE MACH_TYPE_SC_SPS_1 + +#include <asm/arch/regs-base.h> + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_ARCH_MISC_INIT + +#define CONFIG_ENV_IS_IN_MMC + +#define CONFIG_OF_LIBFDT + +/* + * SPL + */ +#define CONFIG_SPL +#define CONFIG_SPL_NO_CPU_SUPPORT_CODE +#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs" +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT + +/* + * U-Boot Commands + */ +#include <config_cmd_default.h> +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_GPIO +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_USB + +/* + * Memory configurations + */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x40000000 /* Base address */ +#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ +#define CONFIG_STACKSIZE 0x00010000 /* 128 KB stack */ +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */ +#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */ +#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* Point initial SP in SRAM so SPL can use it too. */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000 +#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) +/* + * We need to sacrifice first 4 bytes of RAM here to avoid triggering some + * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot + * binary. In case there was more of this mess, 0x100 bytes are skipped. + */ +#define CONFIG_SYS_TEXT_BASE 0x40000100 + +/* + * U-Boot general configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * Serial Driver + */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } +#define CONFIG_CONS_INDEX 0 +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * MMC Driver + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_APBH_DMA +#define CONFIG_MMC +#define CONFIG_MMC_BOUNCE_BUFFER +#define CONFIG_GENERIC_MMC +#define CONFIG_MXS_MMC +#endif +#define CONFIG_ENV_SIZE (16 * 1024) +#ifdef CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (256 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else +#define CONFIG_ENV_IS_NOWHERE +#endif + +/* + * Ethernet on SOC (FEC) + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_ETHPRIME "FEC0" +#define CONFIG_FEC_MXC +#define CONFIG_FEC_MXC_MULTI +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC +#endif + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT 0 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + +/* + * Boot Linux + */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyAMA0,115200" +#define CONFIG_BOOTCOMMAND "bootm " +#define CONFIG_LOADADDR 0x42000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* + * Extra Environments + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "update_sd_firmware_filename=u-boot.sd\0" \ + "update_sd_firmware=" /* Update the SD firmware partition */ \ + "if mmc rescan ; then " \ + "if tftp ${update_sd_firmware_filename} ; then " \ + "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ + "setexpr fw_sz ${fw_sz} + 1 ; " \ + "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ + "fi ; " \ + "fi\0" + +#endif /* __SC_SPS_1_H__ */ diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h index 1494a2ecc4..2336a8d4ec 100644 --- a/include/configs/scb9328.h +++ b/include/configs/scb9328.h @@ -27,7 +27,6 @@ #define CONFIG_ARM920T 1 /* this is an ARM920T CPU */ #define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */ #define CONFIG_SCB9328 1 /* on a scb9328tronix board */ -#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */ #define CONFIG_IMX_SERIAL #define CONFIG_IMX_SERIAL1 @@ -100,13 +99,6 @@ */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) -#define CONFIG_STACKSIZE (120<<10) /* stack size */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */ -#endif - /* SDRAM Setup Values 0x910a8300 Precharge Command CAS 3 0x910a8200 Precharge Command CAS 2 diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index f661583fed..afc4a855bf 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -27,26 +27,26 @@ #include <asm/sizes.h> /* LP0 suspend / resume */ -#define CONFIG_TEGRA2_LP0 +#define CONFIG_TEGRA20_LP0 #define CONFIG_AES #define CONFIG_TEGRA_PMU #define CONFIG_TPS6586X_POWER #define CONFIG_TEGRA_CLOCK_SCALING -#include "tegra2-common.h" +#include "tegra20-common.h" /* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-seaboard +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* High-level configuration options */ -#define V_PROMPT "Tegra2 (SeaBoard) # " -#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Seaboard" +#define V_PROMPT "Tegra20 (SeaBoard) # " +#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Seaboard" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTD +#define CONFIG_TEGRA20_ENABLE_UARTD #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */ @@ -95,14 +95,14 @@ #define CONFIG_CMD_DHCP /* Enable keyboard */ -#define CONFIG_TEGRA2_KEYBOARD +#define CONFIG_TEGRA20_KEYBOARD #define CONFIG_KEYBOARD -#undef TEGRA2_DEVICE_SETTINGS -#define TEGRA2_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ +#undef TEGRA20_DEVICE_SETTINGS +#define TEGRA20_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ "stdout=serial\0" \ "stderr=serial\0" -#include "tegra2-common-post.h" +#include "tegra20-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 8792c857c8..1c0978da8a 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -45,8 +45,6 @@ /* input clock of PLL (the SMDK2410 has 12MHz input clock) */ #define CONFIG_SYS_CLK_FREQ 12000000 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -149,17 +147,6 @@ #define CONFIG_LZMA /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index eb1466c52b..47369aa939 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -69,7 +69,7 @@ /* select serial console configuration */ #define CONFIG_SERIAL_MULTI -#define CONFIG_SERIAL1 /* use SERIAL 1 */ +#define CONFIG_SERIAL3 /* use SERIAL 3 */ #define CONFIG_BAUDRATE 115200 #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 @@ -112,6 +112,11 @@ #define CONFIG_SPL #define COPY_BL2_FNPTR_ADDR 0x02020030 +/* specific .lds file */ +#define CONFIG_SPL_LDSCRIPT "board/samsung/smdk5250/smdk5250-uboot-spl.lds" +#define CONFIG_SPL_TEXT_BASE 0x02023400 +#define CONFIG_SPL_MAX_SIZE (14 * 1024) + #define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" /* Miscellaneous configurable options */ @@ -133,9 +138,6 @@ #define CONFIG_RD_LVL -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ - #define CONFIG_NR_DRAM_BANKS 8 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index 04caeef968..d4dc8ef82d 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -141,13 +141,6 @@ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE 0x40000 /* regular stack 256KB */ - /********************************** Support Clock Settings ********************************** diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index fd9f96d462..22de3448e3 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -182,13 +182,6 @@ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ - /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 41d7780a0e..602337f4da 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -115,9 +115,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ - /* SMDKV310 has 4 bank of DRAM */ #define CONFIG_NR_DRAM_BANKS 4 #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ @@ -135,11 +132,6 @@ #undef CONFIG_CMD_IMLS #define CONFIG_IDENT_STRING " for SMDKC210/V310" -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - #define CONFIG_CLK_1000_400_200 /* MIU (Memory Interleaving Unit) */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 8af3c02f34..218ca546bb 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -40,7 +40,6 @@ /* CPU */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS @@ -162,7 +161,6 @@ /* U-Boot memory settings */ #define CONFIG_SYS_MALLOC_LEN (1 << 20) -#define CONFIG_STACKSIZE (256 << 10) /* Command line configuration */ #include <config_cmd_default.h> diff --git a/include/configs/snowball.h b/include/configs/snowball.h new file mode 100644 index 0000000000..30f4a4eb55 --- /dev/null +++ b/include/configs/snowball.h @@ -0,0 +1,266 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * #define DEBUG 1 + */ + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SNOWBALL +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_BOARD_LATE_INIT + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_U8500 +#define CONFIG_L2_OFF + +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF +#define CONFIG_SYS_HZ 1000 /* must be 1000 */ + +/*----------------------------------------------------------------------- + * Size of environment and malloc() pool + */ +/* + * If you use U-Boot as crash kernel, make sure that it does not overwrite + * information saved by kexec during panic. Kexec expects the start + * address of the executable 32K above "crashkernel" address. + */ +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (8*1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024) + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ + +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV +#define CONFIG_ENV_OFFSET 0x0118000 +#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */ + +/* + * PL011 Configuration + */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_SERIAL_RLCR +#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT + +/* + * U8500 UART registers base for 3 serial devices + */ +#define CFG_UART0_BASE 0x80120000 +#define CFG_UART1_BASE 0x80121000 +#define CFG_UART2_BASE 0x80007000 +#define CFG_SERIAL0 CFG_UART0_BASE +#define CFG_SERIAL1 CFG_UART1_BASE +#define CFG_SERIAL2 CFG_UART2_BASE +#define CONFIG_PL011_CLOCK 38400000 +#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \ + (void *)CFG_SERIAL2 } +#define CONFIG_CONS_INDEX 2 +#define CONFIG_BAUDRATE 115200 + +/* + * Devices and file systems + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION + +/* + * Commands + */ +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_BDI +#define CONFIG_CMD_IMI +#define CONFIG_CMD_MISC +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_CONSOLE +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_SOURCE + +#ifndef CONFIG_BOOTDELAY +#define CONFIG_BOOTDELAY 1 +#endif +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ + +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTCOMMAND \ +"mmc dev 1; " \ + "if run loadbootscript; " \ + "then run bootscript; " \ + "else " \ + "if run mmcload; " \ + "then run mmcboot; " \ + "else " \ + "mmc dev 0; " \ + "if run emmcloadbootscript; " \ + "then run bootscript; " \ + "else " \ + "if run emmcload; " \ + "then run emmcboot; " \ + "else " \ + "echo No media to boot from; " \ + "fi; " \ + "fi; " \ + "fi; " \ + "fi; " + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=n\0" \ + "loadaddr=0x00100000\0" \ + "console=ttyAMA2,115200n8\0" \ + "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \ + "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript " \ + "from mmc ...; source ${loadaddr}\0" \ + "memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M " \ + "hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0" \ + "memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M " \ + "mem=64M@160M mem_mali=32M@224M " \ + "pmem_hwb=128M@256M mem=128M@384M\0" \ + "memargs1024=mem=128M@0 mali.mali_mem=32M@128M " \ + "hwmem=168M@M160M mem=48M@328M " \ + "mem_issw=1M@383M mem=640M@384M\0" \ + "memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \ + "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \ + "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \ + "commonargs=setenv bootargs console=${console} " \ + "vmalloc=300M\0" \ + "emmcargs=setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk0p3 " \ + "rootwait\0" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console}\0" \ + "emmcboot=echo Booting from eMMC ...; " \ + "run commonargs emmcargs memargs; " \ + "bootm ${loadaddr}\0" \ + "mmcargs=setenv bootargs ${bootargs} " \ + "root=/dev/mmcblk1p2 " \ + "rootwait earlyprintk\0" \ + "mmcboot=echo Booting from external MMC ...; " \ + "run commonargs mmcargs memargs; " \ + "bootm ${loadaddr}\0" \ + "fdt_high=0x2BC00000\0" \ + "stdout=serial,usbtty\0" \ + "stdin=serial,usbtty\0" \ + "stderr=serial,usbtty\0" + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "U8500 $ " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 + +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_SETUP_MEMORY_TAGS 2 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */ + +/* + * additions for new relocation code + */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET + +/* landing address before relocation */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0x0 +#endif + +/* + * MMC related configs + */ +#define CONFIG_ARM_PL180_MMCI +#define MMC_BLOCK_SIZE 512 +#define CFG_EMMC_BASE 0x80114000 +#define CFG_MMC_BASE 0x80126000 + +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* + * base register values for U8500 + */ +#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */ + + +/* + * U8500 GPIO register base for 9 banks + */ +#define CONFIG_DB8500_GPIO +#define CFG_GPIO_0_BASE 0x8012E000 +#define CFG_GPIO_1_BASE 0x8012E080 +#define CFG_GPIO_2_BASE 0x8000E000 +#define CFG_GPIO_3_BASE 0x8000E080 +#define CFG_GPIO_4_BASE 0x8000E100 +#define CFG_GPIO_5_BASE 0x8000E180 +#define CFG_GPIO_6_BASE 0x8011E000 +#define CFG_GPIO_7_BASE 0x8011E080 +#define CFG_GPIO_8_BASE 0xA03FE000 + +#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index a6d1cfbcb0..192cda1438 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -233,14 +233,6 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO -/* Stack sizes */ -#define CONFIG_STACKSIZE (128*1024) - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) -#define CONFIG_STACKSIZE_FIQ (4*1024) -#endif - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x00000000 diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h new file mode 100644 index 0000000000..a2a0156a65 --- /dev/null +++ b/include/configs/stamp9g20.h @@ -0,0 +1,266 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2010 + * Achim Ehrlich <aehrlich@taskit.de> + * taskit GmbH <www.taskit.de> + * + * (C) Copyright 2012 + * Markus Hubig <mhubig@imko.de> + * IMKO GmbH <www.imko.de> + * + * Configuation settings for the stamp9g20 CPU module. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> + +/* + * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot + * program. Since the linker has to swallow that define, we must use a pure + * hex number here! + */ +#define CONFIG_SYS_TEXT_BASE 0x23f00000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ +#define CONFIG_SYS_HZ 1000 /* 1ms resolution */ + +/* misc settings */ +#define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */ +#define CONFIG_SETUP_MEMORY_TAGS /* pass memory defs to kernel */ +#define CONFIG_INITRD_TAG /* pass initrd param to kernel */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ +#define CONFIG_BOARD_EARLY_INIT_f /* call board_early_init_f() */ +#define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */ + +/* setting board specific options */ +#ifdef CONFIG_PORTUXG20 +# define CONFIG_MACH_TYPE MACH_TYPE_PORTUXG20 +# define CONFIG_MACB +#else +# define CONFIG_MACH_TYPE MACH_TYPE_STAMP9G20 +#endif + +/* + * SDRAM: 1 bank, 64 MB, base address 0x20000000 + * Already initialized before u-boot gets started. + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 +#define CONFIG_SYS_SDRAM_SIZE (64 << 20) + +/* + * Perform a SDRAM Memtest from the start of SDRAM + * till the beginning of the U-Boot position in RAM. + */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN \ + ROUND(3 * CONFIG_ENV_SIZE + (128 << 10), 0x1000) + +/* + * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, + * leaving the correct space for initial global data structure above that + * address while providing maximum stack area below. + */ +#define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) + +/* NAND flash settings */ +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +#define CONFIG_SYS_NAND_DBW_8 +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 + +/* general purpose I/O */ +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ +#define CONFIG_AT91_GPIO /* enable the GPIO features */ +#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 + +/* LED configuration */ +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED + +/* The LED PINs */ +#define CONFIG_RED_LED AT91_PIN_PC5 +#define CONFIG_GREEN_LED AT91_PIN_PC4 +#define CONFIG_YELLOW_LED AT91_PIN_PC10 + +#define STATUS_LED_RED 0 +#define STATUS_LED_GREEN 1 +#define STATUS_LED_YELLOW 2 + +/* Red LED */ +#define STATUS_LED_BIT STATUS_LED_RED +#define STATUS_LED_STATE STATUS_LED_OFF +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) + +/* Green LED */ +#define STATUS_LED_BIT1 STATUS_LED_GREEN +#define STATUS_LED_STATE1 STATUS_LED_ON +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) + +/* Yellow LED */ +#define STATUS_LED_BIT2 STATUS_LED_YELLOW +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) + +/* Boot status LED */ +#define STATUS_LED_BOOT STATUS_LED_GREEN + +/* + * Ethernet configuration + * + * PortuxG20 has always ethernet but for Stamp9G20 you + * can enable it here if your baseboard features ethernet. + */ + +/* #define CONFIG_MACB */ + +#ifdef CONFIG_MACB +# define CONFIG_RMII /* use reduced MII inteface */ +# define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ + +/* BOOTP and DHCP options */ +# define CONFIG_BOOTP_BOOTFILESIZE +# define CONFIG_BOOTP_BOOTPATH +# define CONFIG_BOOTP_GATEWAY +# define CONFIG_BOOTP_HOSTNAME +# define CONFIG_NFSBOOTCOMMAND \ + "setenv autoload yes; setenv autoboot yes; " \ + "setenv bootargs ${basicargs} ${mtdparts} " \ + "root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; " \ + "dhcp" +#endif /* CONFIG_MACB */ + +/* Enable the watchdog */ +#define CONFIG_AT91SAM9_WATCHDOG +#define CONFIG_HW_WATCHDOG + +/* USB configuration */ +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_USB_STORAGE +#define CONFIG_DOS_PARTITION +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 + +/* General Boot Parameter */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTCOMMAND "run flashboot" +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING + +/* + * RAM Memory address where to put the + * Linux Kernel befor starting. + */ +#define CONFIG_SYS_LOAD_ADDR 0x22000000 + +/* + * The NAND Flash partitions: + * ========================================== + * 0x0000000-0x001ffff -> 128k, bootstrap + * 0x0020000-0x005ffff -> 256k, u-boot + * 0x0060000-0x007ffff -> 128k, env1 + * 0x0080000-0x009ffff -> 128k, env2 (backup) + * 0x0100000-0x06fffff -> 6M, kernel + * 0x0700000-0x8000000 -> 121M, RootFS + */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET ((128 + 256) << 10) +#define CONFIG_ENV_OFFSET_REDUND ((128 + 256 + 128) << 10) +#define CONFIG_ENV_SIZE (128 << 10) + +/* + * Predefined environment variables. + * Usefull to define some easy to use boot commands. + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + \ + "basicargs=console=ttyS0,115200\0" \ + \ + "mtdparts=mtdparts=atmel_nand:128k(bootstrap)ro," \ + "256k(uboot)ro,128k(env1)ro," \ + "128k(env2)ro,6M(linux),-(root)rw\0" \ + \ + "flashboot=setenv bootargs ${basicargs} ${mtdparts} " \ + "root=/dev/mtdblock5 rootfstype=jffs2; " \ + "nand read 0x22000000 0x100000 0x600000; " \ + "bootm 22000000\0" \ + \ + "sdboot=setenv bootargs ${basicargs} ${mtdparts} " \ + "root=/dev/mmcblk0p1 rootwait; " \ + "nand read 0x22000000 0x100000 0x600000; " \ + "bootm 22000000" + +/* Command line & features configuration */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS + +#define CONFIG_CMD_NAND +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_CMD_LED + +#ifdef CONFIG_MACB +# define CONFIG_CMD_PING +# define CONFIG_CMD_DHCP +#else +# undef CONFIG_CMD_BOOTD +# undef CONFIG_CMD_NET +# undef CONFIG_CMD_NFS +#endif /* CONFIG_MACB */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 777f77cfc0..375265d475 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -27,6 +27,7 @@ */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ +#define CONFIG_OMAP_GPIO #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -47,7 +48,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -183,12 +183,6 @@ #define CONFIG_SYS_HZ 1000 /* - * Stack sizes - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ @@ -251,6 +245,7 @@ #define CONFIG_SPL_I2C_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_NAND_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" diff --git a/include/configs/tec.h b/include/configs/tec.h index 3d0a78825b..9b3f88dff8 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -26,21 +26,21 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include "tegra2-common.h" +#include "tegra20-common.h" /* Enable fdt support for TEC. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-tec +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-tec #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* High-level configuration options */ -#define V_PROMPT "Tegra2 (TEC) # " -#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" +#define V_PROMPT "Tegra20 (TEC) # " +#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" #define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011 /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTD /* UARTD: debug UART */ +#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_BOARD_EARLY_INIT_F @@ -79,4 +79,6 @@ "ext2load mmc 0 0x17000000 /boot/uImage;" \ "bootm" +#include "tegra20-common-post.h" + #endif /* __CONFIG_H */ diff --git a/include/configs/tegra2-common-post.h b/include/configs/tegra20-common-post.h index c21fc28dfe..42f270f7bc 100644 --- a/include/configs/tegra2-common-post.h +++ b/include/configs/tegra20-common-post.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef __TEGRA2_COMMON_POST_H -#define __TEGRA2_COMMON_POST_H +#ifndef __TEGRA20_COMMON_POST_H +#define __TEGRA20_COMMON_POST_H #ifdef CONFIG_BOOTCOMMAND @@ -141,9 +141,74 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ - TEGRA2_DEVICE_SETTINGS \ + TEGRA20_DEVICE_SETTINGS \ "fdt_load=0x01000000\0" \ "fdt_high=01100000\0" \ BOOTCMDS_COMMON -#endif /* __TEGRA2_COMMON_POST_H */ +/* overrides for SPL build here */ +#ifdef CONFIG_SPL_BUILD + +/* remove devicetree support */ +#ifdef CONFIG_OF_CONTROL +#undef CONFIG_OF_CONTROL +#endif + +/* remove SERIAL_MULTI */ +#ifdef CONFIG_SERIAL_MULTI +#undef CONFIG_SERIAL_MULTI +#endif + +/* remove I2C support */ +#ifdef CONFIG_TEGRA_I2C +#undef CONFIG_TEGRA_I2C +#endif +#ifdef CONFIG_CMD_I2C +#undef CONFIG_CMD_I2C +#endif + +/* remove MMC support */ +#ifdef CONFIG_MMC +#undef CONFIG_MMC +#endif +#ifdef CONFIG_GENERIC_MMC +#undef CONFIG_GENERIC_MMC +#endif +#ifdef CONFIG_TEGRA20_MMC +#undef CONFIG_TEGRA20_MMC +#endif +#ifdef CONFIG_CMD_MMC +#undef CONFIG_CMD_MMC +#endif + +/* remove partitions/filesystems */ +#ifdef CONFIG_DOS_PARTITION +#undef CONFIG_DOS_PARTITION +#endif +#ifdef CONFIG_EFI_PARTITION +#undef CONFIG_EFI_PARTITION +#endif +#ifdef CONFIG_CMD_EXT2 +#undef CONFIG_CMD_EXT2 +#endif +#ifdef CONFIG_CMD_FAT +#undef CONFIG_CMD_FAT +#endif + +/* remove USB */ +#ifdef CONFIG_USB_EHCI +#undef CONFIG_USB_EHCI +#endif +#ifdef CONFIG_USB_EHCI_TEGRA +#undef CONFIG_USB_EHCI_TEGRA +#endif +#ifdef CONFIG_USB_STORAGE +#undef CONFIG_USB_STORAGE +#endif +#ifdef CONFIG_CMD_USB +#undef CONFIG_CMD_USB +#endif + +#endif /* CONFIG_SPL_BUILD */ + +#endif /* __TEGRA20_COMMON_POST_H */ diff --git a/include/configs/tegra2-common.h b/include/configs/tegra20-common.h index 680776270b..4c02f20543 100644 --- a/include/configs/tegra2-common.h +++ b/include/configs/tegra20-common.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef __TEGRA2_COMMON_H -#define __TEGRA2_COMMON_H +#ifndef __TEGRA20_COMMON_H +#define __TEGRA20_COMMON_H #include <asm/sizes.h> /* @@ -37,15 +37,13 @@ * High Level Configuration Options */ #define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */ -#define CONFIG_TEGRA2 /* in a NVidia Tegra2 core */ -#define CONFIG_MACH_TEGRA_GENERIC /* which is a Tegra generic machine */ +#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */ +#define CONFIG_TEGRA /* which is a Tegra generic machine */ #define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ #define CONFIG_SYS_CACHELINE_SIZE 32 -#define CONFIG_ARCH_CPU_INIT /* Fire up the A9 core */ - -#include <asm/arch/tegra2.h> /* get chip and board defs */ +#include <asm/arch/tegra20.h> /* get chip and board defs */ /* * Display CPU and Board information @@ -53,12 +51,10 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_SKIP_LOWLEVEL_INIT - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_OF_LIBFDT /* enable passing of devicetree */ -#ifdef CONFIG_TEGRA2_LP0 +#ifdef CONFIG_TEGRA20_LP0 #define TEGRA_LP0_ADDR 0x1C406000 #define TEGRA_LP0_SIZE 0x2000 #define TEGRA_LP0_VEC \ @@ -112,7 +108,7 @@ #define CONFIG_EHCI_IS_TDI #define CONFIG_EHCI_DCACHE -/* Total I2C ports on Tegra2 */ +/* Total I2C ports on Tegra20 */ #define TEGRA_I2C_NUM_CONTROLLERS 4 /* include default commands */ @@ -136,7 +132,7 @@ /* Environment information, boards can override if required */ #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define TEGRA2_DEVICE_SETTINGS "stdin=serial\0" \ +#define TEGRA20_DEVICE_SETTINGS "stdin=serial\0" \ "stdout=serial\0" \ "stderr=serial\0" @@ -161,28 +157,22 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -#define CONFIG_SYS_MEMTEST_START (TEGRA2_SDRC_CS0 + 0x600000) +#define CONFIG_SYS_MEMTEST_START (TEGRA20_SDRC_CS0 + 0x600000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) #define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */ #define CONFIG_SYS_HZ 1000 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ #define CONFIG_STACKBASE 0x2800000 /* 40MB */ -#define CONFIG_STACKSIZE 0x20000 /* 128K regular stack*/ /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 TEGRA2_SDRC_CS0 +#define PHYS_SDRAM_1 TEGRA20_SDRC_CS0 #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_TEXT_BASE 0x00108000 +#define CONFIG_SYS_TEXT_BASE 0x0010c000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE @@ -195,4 +185,20 @@ #define CONFIG_CMD_GPIO #define CONFIG_CMD_ENTERRCM #define CONFIG_CMD_BOOTZ -#endif /* __TEGRA2_COMMON_H */ + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_TEXT_BASE 0x00108000 +#define CONFIG_SPL_MAX_SIZE 0x00004000 +#define CONFIG_SYS_SPL_MALLOC_START 0x00090000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 +#define CONFIG_SPL_STACK 0x000ffffc + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" + +#endif /* __TEGRA20_COMMON_H */ diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index 2272ad27c2..23cab88ded 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -55,7 +55,6 @@ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_STACKSIZE (256*1024) #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index def5306012..bc04a00945 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -59,7 +59,6 @@ #define CONFIG_SYS_HZ 1000 #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -166,10 +165,4 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/top9000.h b/include/configs/top9000.h index 1a5f680682..7cc65773b4 100644 --- a/include/configs/top9000.h +++ b/include/configs/top9000.h @@ -71,7 +71,6 @@ /* Misc CPU related */ #define CONFIG_ARCH_CPU_INIT -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -303,9 +302,5 @@ extern void read_factory_r(void); /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN \ ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32*1024) -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif #endif diff --git a/include/configs/trats.h b/include/configs/trats.h index 7664a79730..f8da9c01c2 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -42,8 +42,10 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -/* Keep L2 Cache Disabled */ -#define CONFIG_SYS_L2CACHE_OFF +#ifndef CONFIG_SYS_L2CACHE_OFF +#define CONFIG_SYS_L2_PL310 +#define CONFIG_SYS_PL310_BASE 0x10502000 +#endif #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define CONFIG_SYS_TEXT_BASE 0x63300000 @@ -164,6 +166,7 @@ "meminfo=crashkernel=32M@0x50000000\0" \ "nfsroot=/nfsroot/arm\0" \ "bootblock=" CONFIG_BOOTBLOCK "\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \ "mmcdev=0\0" \ "mmcbootpart=2\0" \ "mmcrootpart=3\0" \ @@ -186,9 +189,6 @@ #define CONFIG_SYS_HZ 1000 -/* Stack sizes */ -#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */ - /* TRATS has 2 banks of DRAM */ #define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 56336ae199..63c98dc723 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -58,7 +58,6 @@ #define V_OSCK 26000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) -#undef CONFIG_USE_IRQ /* no support for IRQs */ #define CONFIG_MISC_INIT_R #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ @@ -245,9 +244,6 @@ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 -/* The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ - /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index 34be8a98a1..b3c524981f 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -25,21 +25,21 @@ #define __CONFIG_H #include <asm/sizes.h> -#include "tegra2-common.h" +#include "tegra20-common.h" /* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-trimslice +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-trimslice #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* High-level configuration options */ -#define V_PROMPT "Tegra2 (TrimSlice) # " -#define CONFIG_TEGRA2_BOARD_STRING "Compulab Trimslice" +#define V_PROMPT "Tegra20 (TrimSlice) # " +#define CONFIG_TEGRA20_BOARD_STRING "Compulab Trimslice" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTA -#define CONFIG_TEGRA2_UARTA_GPU +#define CONFIG_TEGRA20_ENABLE_UARTA +#define CONFIG_TEGRA20_UARTA_GPU #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE @@ -94,6 +94,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra2-common-post.h" +#include "tegra20-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index b4ec8f0c3c..151059a939 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -46,8 +46,6 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_TEXT_BASE 0x0 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF @@ -178,17 +176,6 @@ #endif /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ diff --git a/include/configs/tt01.h b/include/configs/tt01.h index 2b2e7fd8cd..cc68a42e86 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -86,9 +86,6 @@ /* default load address, 1MB up the road */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1+0x100000) -/* The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /* Size of malloc() pool, make sure possible frame buffer fits */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 10*1024*1024) diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 6821528971..c8a49bba14 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -84,7 +84,6 @@ /* 8MB DRAM test */ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1+0x0800000) -#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */ /* * Serial Info diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index b26efec570..1bb612826e 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -178,16 +178,6 @@ #define CONFIG_SYS_I2C_GPIOE_ADDR 0x42 /* GPIO expander chip addr */ #define CONFIG_TC35892_GPIO -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ - -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif /* * Physical Memory Map diff --git a/include/configs/vct.h b/include/configs/vct.h index 0a5ce6459c..b4b0949522 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -47,7 +47,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_STACKSIZE (256 << 10) #define CONFIG_SYS_MALLOC_LEN (1 << 20) #define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10) #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 5e4d53861c..25ec2ebfec 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -25,20 +25,20 @@ #define __CONFIG_H #include <asm/sizes.h> -#include "tegra2-common.h" +#include "tegra20-common.h" /* Enable fdt support for Ventana. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-ventana +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-ventana #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* High-level configuration options */ -#define V_PROMPT "Tegra2 (Ventana) # " -#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Ventana" +#define V_PROMPT "Tegra20 (Ventana) # " +#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Ventana" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTD +#define CONFIG_TEGRA20_ENABLE_UARTD #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE #define CONFIG_MACH_TYPE MACH_TYPE_VENTANA @@ -75,6 +75,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra2-common-post.h" +#include "tegra20-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index ff23a92d91..38f5302e71 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -145,17 +145,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ diff --git a/include/configs/vision2.h b/include/configs/vision2.h index ed004a659c..fba897c1ea 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -177,11 +177,6 @@ #define CONFIG_SYS_HUSH_PARSER /* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/* * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 @@ -214,6 +209,8 @@ #define CONFIG_VIDEO_IPUV3 #define CONFIG_CFB_CONSOLE #define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN #define CONFIG_CMD_BMP diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h index 24f89c98e4..e2cf4f005e 100644 --- a/include/configs/vl_ma2sc.h +++ b/include/configs/vl_ma2sc.h @@ -29,7 +29,6 @@ /*--------------------------------------------------------------------------*/ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_ARM926EJS /* This is an ARM926EJS Core */ #define CONFIG_AT91FAMILY #define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/ @@ -379,8 +378,6 @@ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - #ifndef CONFIG_RAMLOAD #define CONFIG_BOOTCOMMAND "run nfsboot" #endif @@ -454,10 +451,4 @@ "erase 10060000 1007FFFF;reset\0" \ " " -/*--------------------------------------------------------------------------*/ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - #endif diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index 01f0b6ce5e..424a902456 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -165,14 +165,6 @@ #define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */ #define CONFIG_SYS_CPUSPEED 0x190 /* 312MHz */ -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif /* * DRAM Map diff --git a/include/configs/whistler.h b/include/configs/whistler.h index f2952d5f45..b747d0e2b2 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -25,21 +25,21 @@ #define __CONFIG_H #include <asm/sizes.h> -#include "tegra2-common.h" +#include "tegra20-common.h" /* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra2-whistler +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-whistler #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE /* High-level configuration options */ -#define V_PROMPT "Tegra2 (Whistler) # " -#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Whistler" +#define V_PROMPT "Tegra20 (Whistler) # " +#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Whistler" /* Board-specific serial config */ #define CONFIG_SERIAL_MULTI -#define CONFIG_TEGRA2_ENABLE_UARTA -#define CONFIG_TEGRA2_UARTA_UAA_UAB +#define CONFIG_TEGRA20_ENABLE_UARTA +#define CONFIG_TEGRA20_UARTA_UAA_UAB #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER @@ -89,6 +89,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#include "tegra2-common-post.h" +#include "tegra20-common-post.h" #endif /* __CONFIG_H */ diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 0ed3bf4a8a..e399e95019 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -44,12 +44,8 @@ #define CONFIG_XAENIAX 1 /* on a xaeniax board */ #define CONFIG_SYS_TEXT_BASE 0x0 - #define CONFIG_BOARD_LATE_INIT - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - /* we will never enable dcache, because we have to setup MMU first */ #define CONFIG_SYS_DCACHE_OFF @@ -182,17 +178,6 @@ #define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ /* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* * SMSC91C111 Network Card */ #define CONFIG_SMC91111 1 diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index 8e6377019b..8b7e05b9e5 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_TEXT_BASE 0x0 #undef CONFIG_BOARD_LATE_INIT -#undef CONFIG_USE_IRQ #undef CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_PREBOOT @@ -154,15 +153,6 @@ unsigned char zipitz2_spi_read(void); #define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ /* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* * SRAM Map */ #define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index c9f737d429..072945ad4a 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -171,6 +171,5 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (0x400000 - 0x8000) -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ #endif /* __CONFIG_H */ diff --git a/include/cpsw.h b/include/cpsw.h new file mode 100644 index 0000000000..296b0e557f --- /dev/null +++ b/include/cpsw.h @@ -0,0 +1,51 @@ +/* + * CPSW Ethernet Switch Driver + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CPSW_H_ +#define _CPSW_H_ + +struct cpsw_slave_data { + u32 slave_reg_ofs; + u32 sliver_reg_ofs; + int phy_id; + int phy_if; +}; + +enum { + CPSW_CTRL_VERSION_1 = 0, + CPSW_CTRL_VERSION_2 /* am33xx like devices */ +}; + +struct cpsw_platform_data { + u32 mdio_base; + u32 cpsw_base; + int mdio_div; + int channels; /* number of cpdma channels (symmetric) */ + u32 cpdma_reg_ofs; /* cpdma register offset */ + int slaves; /* number of slave cpgmac ports */ + u32 ale_reg_ofs; /* address lookup engine reg offset */ + int ale_entries; /* ale table size */ + u32 host_port_reg_ofs; /* cpdma host port registers */ + u32 hw_stats_reg_ofs; /* cpsw hw stats counters */ + u32 mac_control; + struct cpsw_slave_data *slave_data; + void (*control)(int enabled); + u32 host_port_num; + u8 version; +}; + +int cpsw_register(struct cpsw_platform_data *data); + +#endif /* _CPSW_H_ */ diff --git a/include/fdtdec.h b/include/fdtdec.h index fab577ed32..a8f783ffd5 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -57,12 +57,12 @@ struct fdt_memory { */ enum fdt_compat_id { COMPAT_UNKNOWN, - COMPAT_NVIDIA_TEGRA20_USB, /* Tegra2 USB port */ - COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra2 i2c */ - COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra2 dvc (really just i2c) */ - COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra2 memory controller */ - COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra2 memory timing table */ - COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra2 Keyboard */ + COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */ + COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */ + COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */ + COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */ + COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */ + COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */ COMPAT_COUNT, }; diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index 0e265584bd..4e321e762c 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -167,7 +167,6 @@ struct fsl_esdhc_cfg { u32 esdhc_base; - u32 no_snoop; }; /* Select the correct accessors depending on endianess */ diff --git a/include/lcd.h b/include/lcd.h index 6e0a2a3915..42070d7636 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -240,6 +240,7 @@ typedef struct vidinfo { unsigned int reset_delay; unsigned int interface_mode; unsigned int mipi_enabled; + unsigned int dp_enabled; unsigned int cs_setup; unsigned int wr_setup; unsigned int wr_act; diff --git a/include/mmc.h b/include/mmc.h index 2305986546..7546b4a6c8 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -27,6 +27,7 @@ #define _MMC_H_ #include <linux/list.h> +#include <linux/compiler.h> #define SD_VERSION_SD 0x20000 #define SD_VERSION_2 (SD_VERSION_SD | 0x20) @@ -273,6 +274,7 @@ int get_mmc_num(void); int board_mmc_getcd(struct mmc *mmc); int mmc_switch_part(int dev_num, unsigned int part_num); int mmc_getcd(struct mmc *mmc); +void spl_mmc_load(void) __noreturn; #ifdef CONFIG_GENERIC_MMC #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) diff --git a/include/nand.h b/include/nand.h index a48b1b8ed1..c554c552f5 100644 --- a/include/nand.h +++ b/include/nand.h @@ -31,7 +31,7 @@ * at the same time, so do it here. When all drivers are * converted, this will go away. */ -#if defined(CONFIG_NAND_FSL_ELBC) +#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL) #define CONFIG_SYS_NAND_SELF_INIT #endif diff --git a/include/ns16550.h b/include/ns16550.h index e9d2edab09..51cb5b4a66 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -46,6 +46,14 @@ struct NS16550 { UART_REG(lsr); /* 5 */ UART_REG(msr); /* 6 */ UART_REG(spr); /* 7 */ +#ifdef CONFIG_SOC_DA8XX + UART_REG(reg8); /* 8 */ + UART_REG(reg9); /* 9 */ + UART_REG(revid1); /* A */ + UART_REG(revid2); /* B */ + UART_REG(pwr_mgmt); /* C */ + UART_REG(mdr1); /* D */ +#else UART_REG(mdr1); /* 8 */ UART_REG(reg9); /* 9 */ UART_REG(regA); /* A */ @@ -58,6 +66,7 @@ struct NS16550 { UART_REG(ssr); /* 11*/ UART_REG(reg12); /* 12*/ UART_REG(osc_12m_sel); /* 13*/ +#endif }; #define thr rbr diff --git a/include/pci_ids.h b/include/pci_ids.h index 6a85c06bc9..2c6dfd4044 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -364,6 +364,10 @@ #define PCI_DEVICE_ID_ATI_RS400_166 0x5a32 #define PCI_DEVICE_ID_ATI_RS400_200 0x5a33 #define PCI_DEVICE_ID_ATI_RS480 0x5950 +/* additional Radeon families */ +#define PCI_DEVICE_ID_ATI_EVERGREEN 0x9802 +#define PCI_DEVICE_ID_ATI_EVERGREEN2 0x9804 +#define PCI_DEVICE_ID_ATI_WRESTLER 0x9806 /* ATI IXP Chipset */ #define PCI_DEVICE_ID_ATI_IXP200_IDE 0x4349 #define PCI_DEVICE_ID_ATI_IXP200_SMBUS 0x4353 @@ -375,9 +379,13 @@ #define PCI_DEVICE_ID_ATI_IXP400_SATA 0x4379 #define PCI_DEVICE_ID_ATI_IXP400_SATA2 0x437a #define PCI_DEVICE_ID_ATI_IXP600_SATA 0x4380 +#define PCI_DEVICE_ID_ATI_SBX00_PCI_BRIDGE 0x4384 #define PCI_DEVICE_ID_ATI_SBX00_SMBUS 0x4385 #define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c #define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390 +#define PCI_DEVICE_ID_ATI_SBX00_SATA_AHCI 0x4391 +#define PCI_DEVICE_ID_ATI_SBX00_EHCI 0x4396 +#define PCI_DEVICE_ID_ATI_SBX00_OHCI 0x4397 #define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c #define PCI_VENDOR_ID_VLSI 0x1004 @@ -2539,9 +2547,16 @@ #define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 #define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 #define PCI_DEVICE_ID_INTEL_IOAT 0x1a38 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE 0x1c03 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6 0x1c02 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_HDA 0x1c20 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE 0x1e03 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_HDA 0x1e20 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e41 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC 0x1d40 #define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 @@ -2635,6 +2650,7 @@ #define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0 #define PCI_DEVICE_ID_INTEL_TGP_LPC 0x27bc #define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd +#define PCI_DEVICE_ID_INTEL_NM10_AHCI 0x27c1 #define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da #define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd #define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de diff --git a/include/serial.h b/include/serial.h index 5173499124..cbdf8a9bf7 100644 --- a/include/serial.h +++ b/include/serial.h @@ -31,7 +31,7 @@ extern struct serial_device *default_serial_console(void); defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \ - defined(CONFIG_TEGRA2) || defined(CONFIG_SYS_COREBOOT) + defined(CONFIG_TEGRA20) || defined(CONFIG_SYS_COREBOOT) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #if defined(CONFIG_SYS_NS16550_SERIAL) diff --git a/lib/fdtdec.c b/lib/fdtdec.c index cc09e06c73..af17ac1b7a 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -24,8 +24,7 @@ #include <libfdt.h> #include <fdtdec.h> -/* we need the generic GPIO interface here */ -#include <asm-generic/gpio.h> +#include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -59,12 +59,8 @@ CONFIG_NAME="${1%_config}" [ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}" arch="$2" -cpu="$3" -tmp="${cpu#*:}" -if [ "$tmp" != "$cpu" ] ; then - spl_cpu=$tmp - cpu="${cpu%:*}" -fi +cpu=`echo $3 | awk 'BEGIN {FS = ":"} ; {print $1}'` +spl_cpu=`echo $3 | awk 'BEGIN {FS = ":"} ; {print $2}'` if [ "$4" = "-" ] ; then board=${BOARD_NAME} else @@ -135,21 +131,21 @@ fi # # Create include file for Make # -echo "ARCH = ${arch}" > config.mk -if [ ! -z "$spl_cpu" ] ; then - echo 'ifeq ($(CONFIG_SPL_BUILD),y)' >> config.mk - echo "CPU = ${spl_cpu}" >> config.mk - echo "else" >> config.mk - echo "CPU = ${cpu}" >> config.mk - echo "endif" >> config.mk -else - echo "CPU = ${cpu}" >> config.mk -fi -echo "BOARD = ${board}" >> config.mk - -[ "${vendor}" ] && echo "VENDOR = ${vendor}" >> config.mk - -[ "${soc}" ] && echo "SOC = ${soc}" >> config.mk +( echo "ARCH = ${arch}" + if [ ! -z "$spl_cpu" ] ; then + echo 'ifeq ($(CONFIG_SPL_BUILD),y)' + echo "CPU = ${spl_cpu}" + echo "else" + echo "CPU = ${cpu}" + echo "endif" + else + echo "CPU = ${cpu}" + fi + echo "BOARD = ${board}" + + [ "${vendor}" ] && echo "VENDOR = ${vendor}" + [ "${soc}" ] && echo "SOC = ${soc}" + exit 0 ) > config.mk # Assign board directory to BOARDIR variable if [ -z "${vendor}" ] ; then diff --git a/spl/Makefile b/spl/Makefile index 2cf7bdad63..476a5e65d1 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -61,6 +61,16 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif +ifeq ($(SOC),tegra20) +LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o +endif + +# Add GCC lib +ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") +PLATFORM_LIBGCC = $(SPLTREE)/arch/$(ARCH)/lib/libgcc.o +PLATFORM_LIBS := $(filter-out %/libgcc.o, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC) +endif + START := $(addprefix $(SPLTREE)/,$(START)) LIBS := $(addprefix $(SPLTREE)/,$(sort $(LIBS-y))) diff --git a/tools/.gitignore b/tools/.gitignore index 3557a75b9e..3088f4de98 100644 --- a/tools/.gitignore +++ b/tools/.gitignore @@ -2,6 +2,7 @@ /envcrc /gen_eth_addr /img2srec +/kwboot /mkenvimage /mkimage /mpc86x_clk diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py index be40af3ed2..0503bac42e 100644 --- a/tools/patman/patchstream.py +++ b/tools/patman/patchstream.py @@ -36,6 +36,9 @@ re_remove = re.compile('^BUG=|^TEST=|^Change-Id:|^Review URL:' # Lines which are allowed after a TEST= line re_allowed_after_test = re.compile('^Signed-off-by:') +# Signoffs +re_signoff = re.compile('^Signed-off-by:') + # The start of the cover letter re_cover = re.compile('^Cover-letter:') @@ -43,7 +46,7 @@ re_cover = re.compile('^Cover-letter:') re_series = re.compile('^Series-(\w*): *(.*)') # Commit tags that we want to collect and keep -re_tag = re.compile('^(Tested-by|Acked-by|Signed-off-by|Cc): (.*)') +re_tag = re.compile('^(Tested-by|Acked-by|Cc): (.*)') # The start of a new commit in the git log re_commit = re.compile('^commit (.*)') @@ -207,8 +210,12 @@ class PatchStream: if is_blank: # Blank line ends this change list self.in_change = 0 + elif line == '---' or re_signoff.match(line): + self.in_change = 0 + out = self.ProcessLine(line) else: - self.series.AddChange(self.in_change, self.commit, line) + if self.is_log: + self.series.AddChange(self.in_change, self.commit, line) self.skip_blank = False # Detect Series-xxx tags @@ -234,15 +241,8 @@ class PatchStream: # Detect tags in the commit message elif tag_match: - # Onlly allow a single signoff tag - if tag_match.group(1) == 'Signed-off-by': - if self.signoff: - self.warn.append('Patch has more than one Signed-off-by ' - 'tag') - self.signoff += [line] - # Remove Tested-by self, since few will take much notice - elif (tag_match.group(1) == 'Tested-by' and + if (tag_match.group(1) == 'Tested-by' and tag_match.group(2).find(os.getenv('USER') + '@') != -1): self.warn.append("Ignoring %s" % line) elif tag_match.group(1) == 'Cc': @@ -281,8 +281,6 @@ class PatchStream: # Output the tags (signeoff first), then change list out = [] - if self.signoff: - out += self.signoff log = self.series.MakeChangeLog(self.commit) out += self.FormatTags(self.tags) out += [line] + log diff --git a/tools/patman/series.py b/tools/patman/series.py index 05d9e73a46..27528bf21d 100644 --- a/tools/patman/series.py +++ b/tools/patman/series.py @@ -114,6 +114,13 @@ class Series(dict): cc_list += gitutil.BuildEmailList(commit.tags) cc_list += gitutil.BuildEmailList(commit.cc_list) + # Skip items in To list + if 'to' in self: + try: + map(cc_list.remove, gitutil.BuildEmailList(self.to)) + except ValueError: + pass + for email in cc_list: if email == None: email = col.Color(col.YELLOW, "<alias '%s' not found>" @@ -154,10 +161,9 @@ class Series(dict): for this_commit, text in self.changes[change]: if commit and this_commit != commit: continue - if text not in out: - out.append(text) + out.append(text) if out: - out = ['Changes in v%d:' % change] + sorted(out) + out = ['Changes in v%d:' % change] + out if need_blank: out = [''] + out final += out @@ -174,12 +180,13 @@ class Series(dict): col = terminal.Color() if self.get('version'): changes_copy = dict(self.changes) - for version in range(2, int(self.version) + 1): + for version in range(1, int(self.version) + 1): if self.changes.get(version): del changes_copy[version] else: - str = 'Change log missing for v%d' % version - print col.Color(col.RED, str) + if version > 1: + str = 'Change log missing for v%d' % version + print col.Color(col.RED, str) for version in changes_copy: str = 'Change log for unknown version v%d' % version print col.Color(col.RED, str) |