summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/sun50i-a64-amarula-relic.dts65
-rw-r--r--arch/arm/dts/sun50i-a64-bananapi-m64.dts26
-rw-r--r--arch/arm/dts/sun50i-h5-orangepi-pc2.dts59
-rw-r--r--arch/arm/dts/sun50i-h5-orangepi-prime.dts13
-rw-r--r--arch/arm/dts/sun8i-a83t.dtsi20
-rw-r--r--arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts13
-rw-r--r--arch/arm/dts/sun8i-h3.dtsi32
-rw-r--r--arch/arm/dts/sunxi-u-boot.dtsi12
-rw-r--r--arch/arm/include/asm/arch-sunxi/clock_sun6i.h23
-rw-r--r--arch/arm/include/asm/arch-sunxi/usb_phy.h20
-rw-r--r--arch/arm/mach-sunxi/Kconfig9
-rw-r--r--arch/arm/mach-sunxi/Makefile3
-rw-r--r--arch/arm/mach-sunxi/usb_phy.c406
-rw-r--r--board/sunxi/MAINTAINERS6
-rw-r--r--board/sunxi/board.c40
-rw-r--r--configs/Sinovoip_BPI_M2_Plus_defconfig1
-rw-r--r--configs/amarula_a64_relic_defconfig17
-rw-r--r--configs/bananapi_m64_defconfig1
-rw-r--r--configs/orangepi_pc2_defconfig1
-rw-r--r--configs/orangepi_prime_defconfig1
-rw-r--r--doc/device-tree-bindings/phy/sun4i-usb-phy.txt65
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/phy/allwinner/Kconfig13
-rw-r--r--drivers/phy/allwinner/Makefile6
-rw-r--r--drivers/phy/allwinner/phy-sun4i-usb.c575
-rw-r--r--drivers/usb/host/ehci-sunxi.c66
-rw-r--r--drivers/usb/host/ohci-sunxi.c72
-rw-r--r--drivers/usb/musb-new/musb_core.h4
-rw-r--r--drivers/usb/musb-new/musb_regs.h3
-rw-r--r--drivers/usb/musb-new/musb_uboot.c22
-rw-r--r--drivers/usb/musb-new/sunxi.c228
-rw-r--r--include/phy-sun4i-usb.h34
34 files changed, 1280 insertions, 580 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 69f852012e..790571b773 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -382,6 +382,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-orangepi-prime.dtb \
sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
+ sun50i-a64-amarula-relic.dtb \
sun50i-a64-bananapi-m64.dtb \
sun50i-a64-nanopi-a64.dtb \
sun50i-a64-olinuxino.dtb \
diff --git a/arch/arm/dts/sun50i-a64-amarula-relic.dts b/arch/arm/dts/sun50i-a64-amarula-relic.dts
new file mode 100644
index 0000000000..f3b4e93ece
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-amarula-relic.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Amarula A64-Relic";
+ compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
index 02db114113..dcde4a4881 100644
--- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
@@ -68,6 +68,14 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
@@ -108,6 +116,14 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
@@ -119,3 +135,13 @@
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
index d1c347d2b8..a65300d5aa 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
@@ -50,6 +50,11 @@
model = "OrangePi PC 2";
compatible = "xunlong,orangepi-pc-2", "allwinner,sun50i-h5";
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &emac;
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -58,11 +63,6 @@
reg = <0x40000000 0x40000000>;
};
- aliases {
- serial0 = &uart0;
- ethernet0 = &emac;
- };
-
soc {
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
@@ -73,6 +73,29 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
compatible = "allwinner,sun50i-h5-mmc",
"allwinner,sun50i-a64-mmc",
@@ -86,13 +109,7 @@
status = "okay";
};
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
-&usbphy {
+&ohci0 {
status = "okay";
};
@@ -100,21 +117,17 @@
status = "okay";
};
-&ehci1 {
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-mode = "rgmii";
- phy-handle = <&ext_rgmii_phy>;
+&usb_otg {
+ dr_mode = "otg";
status = "okay";
};
-&external_mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
+&usbphy {
+ status = "okay";
};
diff --git a/arch/arm/dts/sun50i-h5-orangepi-prime.dts b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
index d4577dfae1..131d8058c4 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
@@ -72,6 +72,10 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -89,6 +93,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
@@ -99,6 +107,11 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
status = "okay";
};
diff --git a/arch/arm/dts/sun8i-a83t.dtsi b/arch/arm/dts/sun8i-a83t.dtsi
index bab6c1812b..2953e0fdac 100644
--- a/arch/arm/dts/sun8i-a83t.dtsi
+++ b/arch/arm/dts/sun8i-a83t.dtsi
@@ -230,13 +230,29 @@
reg = <0x01c19000 0x400>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
status = "disabled";
};
+ usbphy: phy@1c19400 {
+ compatible = "allwinner,sun8i-a83t-usb-phy";
+ reg = <0x01c19400 0x10>,
+ <0x01c1a800 0x14>,
+ <0x01c1b800 0x14>;
+ reg-names = "phy_ctrl",
+ "pmu1",
+ "pmu2";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
ehci0: usb@01c1a000 {
compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
status = "disabled";
};
@@ -244,6 +260,8 @@
compatible = "allwinner,sun8i-a83t-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
status = "disabled";
};
@@ -251,6 +269,8 @@
compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
status = "disabled";
};
diff --git a/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts
index f3b1d5f6db..e766aa3e2f 100644
--- a/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -93,6 +93,10 @@
};
};
+&ehci0 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
@@ -146,6 +150,10 @@
status = "okay";
};
+&ohci0 {
+ status = "okay";
+};
+
&ohci1 {
status = "okay";
};
@@ -189,6 +197,11 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
/* USB VBUS is on as long as VCC-IO is on */
status = "okay";
diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi
index d9d31fa3f5..1df6ca4f31 100644
--- a/arch/arm/dts/sun8i-h3.dtsi
+++ b/arch/arm/dts/sun8i-h3.dtsi
@@ -219,6 +219,19 @@
#size-cells = <0>;
};
+ usb_otg: usb@1c19000 {
+ compatible = "allwinner,sun8i-h3-musb";
+ reg = <0x01c19000 0x400>;
+ clocks = <&ccu CLK_BUS_OTG>;
+ resets = <&ccu RST_BUS_OTG>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
+ };
+
usbphy: phy@01c19400 {
compatible = "allwinner,sun8i-h3-usb-phy";
reg = <0x01c19400 0x2c>,
@@ -251,6 +264,25 @@
#phy-cells = <1>;
};
+ ehci0: usb@1c1a000 {
+ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+ status = "disabled";
+ };
+
+ ohci0: usb@1c1a400 {
+ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+ <&ccu CLK_USB_OHCI0>;
+ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+ status = "disabled";
+ };
+
ehci1: usb@01c1b000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi
index 72e95afd78..5adfd9bca2 100644
--- a/arch/arm/dts/sunxi-u-boot.dtsi
+++ b/arch/arm/dts/sunxi-u-boot.dtsi
@@ -1,14 +1,5 @@
#include <config.h>
-/*
- * This is the maximum size the U-Boot binary can be, which is basically
- * the start of the environment, minus the start of the U-Boot binary in
- * the MMC. This makes the assumption that the MMC is using 512-bytes
- * blocks, but devices using something other than that remains to be
- * seen.
- */
-#define UBOOT_MMC_MAX_SIZE (CONFIG_ENV_OFFSET - (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512))
-
/ {
binman {
filename = "u-boot-sunxi-with-spl.bin";
@@ -17,9 +8,6 @@
filename = "spl/sunxi-spl.bin";
};
u-boot-img {
-#ifdef CONFIG_MMC
- size = <UBOOT_MMC_MAX_SIZE>;
-#endif
pos = <CONFIG_SPL_PAD_TO>;
};
};
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 27a0da938c..8acf79fbba 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -270,21 +270,27 @@ struct sunxi_ccm_reg {
#define AXI_GATE_OFFSET_DRAM 0
/* ahb_gate0 offsets */
-#define AHB_GATE_OFFSET_USB_OHCI1 30
-#define AHB_GATE_OFFSET_USB_OHCI0 29
#ifdef CONFIG_MACH_SUNXI_H3_H5
/*
* These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
* them 0 - 2 like they were called on older SoCs.
*/
+#define AHB_GATE_OFFSET_USB_OHCI0 28
#define AHB_GATE_OFFSET_USB_EHCI2 27
#define AHB_GATE_OFFSET_USB_EHCI1 26
+#define AHB_GATE_OFFSET_USB_EHCI0 24
+#elif defined(CONFIG_MACH_SUN50I)
+#define AHB_GATE_OFFSET_USB_OHCI0 29
#define AHB_GATE_OFFSET_USB_EHCI0 25
#else
+#define AHB_GATE_OFFSET_USB_OHCI1 30
+#define AHB_GATE_OFFSET_USB_OHCI0 29
#define AHB_GATE_OFFSET_USB_EHCI1 27
#define AHB_GATE_OFFSET_USB_EHCI0 26
#endif
-#ifndef CONFIG_MACH_SUN8I_R40
+#ifdef CONFIG_MACH_SUN50I
+#define AHB_GATE_OFFSET_USB0 23
+#elif !defined(CONFIG_MACH_SUN8I_R40)
#define AHB_GATE_OFFSET_USB0 24
#else
#define AHB_GATE_OFFSET_USB0 25
@@ -344,13 +350,10 @@ struct sunxi_ccm_reg {
#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
#define CCM_USB_CTRL_PHY3_CLK (0x1 << 11)
#ifdef CONFIG_MACH_SUNXI_H3_H5
-/*
- * These are OHCI1 - OHCI3 in the datasheet (OHCI0 is for the OTG) we call
- * them 0 - 2 like they were called on older SoCs.
- */
-#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 17)
-#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 18)
-#define CCM_USB_CTRL_OHCI2_CLK (0x1 << 19)
+#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
+#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
+#define CCM_USB_CTRL_OHCI2_CLK (0x1 << 18)
+#define CCM_USB_CTRL_OHCI3_CLK (0x1 << 19)
#else
#define CCM_USB_CTRL_OHCI0_CLK (0x1 << 16)
#define CCM_USB_CTRL_OHCI1_CLK (0x1 << 17)
diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h
deleted file mode 100644
index 39e7af45dd..0000000000
--- a/arch/arm/include/asm/arch-sunxi/usb_phy.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Sunxi usb-phy code
- *
- * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
- * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- */
-
-int sunxi_usb_phy_probe(void);
-int sunxi_usb_phy_remove(void);
-void sunxi_usb_phy_init(int index);
-void sunxi_usb_phy_exit(int index);
-void sunxi_usb_phy_power_on(int index);
-void sunxi_usb_phy_power_off(int index);
-int sunxi_usb_phy_vbus_detect(int index);
-int sunxi_usb_phy_id_detect(int index);
-void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index f0c9d1b058..a3f7723028 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -124,6 +124,7 @@ endif
config MACH_SUNXI_H3_H5
bool
select DM_I2C
+ select PHY_SUN4I_USB
select SUNXI_DE2
select SUNXI_DRAM_DW
select SUNXI_DRAM_DW_32BIT
@@ -138,6 +139,7 @@ config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
+ select PHY_SUN4I_USB
select DRAM_SUN4I
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
@@ -147,6 +149,7 @@ config MACH_SUN5I
select CPU_V7A
select ARM_CORTEX_CPU_IS_UP
select DRAM_SUN4I
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
imply CONS_INDEX_2 if !DM_SERIAL
@@ -158,6 +161,7 @@ config MACH_SUN6I
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DRAM_SUN6I
+ select PHY_SUN4I_USB
select SUN6I_P2WI
select SUN6I_PRCM
select SUNXI_GEN_SUN6I
@@ -171,6 +175,7 @@ config MACH_SUN7I
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DRAM_SUN4I
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -182,6 +187,7 @@ config MACH_SUN8I_A23
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DRAM_SUN8I_A23
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -194,6 +200,7 @@ config MACH_SUN8I_A33
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
select DRAM_SUN8I_A33
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -203,6 +210,7 @@ config MACH_SUN8I_A83T
bool "sun8i (Allwinner A83T)"
select CPU_V7A
select DRAM_SUN8I_A83T
+ select PHY_SUN4I_USB
select SUNXI_GEN_SUN6I
select MMC_SUNXI_HAS_NEW_MODE
select SUPPORT_SPL
@@ -253,6 +261,7 @@ config MACH_SUN50I
bool "sun50i (Allwinner A64)"
select ARM64
select DM_I2C
+ select PHY_SUN4I_USB
select SUNXI_DE2
select SUNXI_GEN_SUN6I
select SUNXI_HIGH_SRAM
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 1e261bdc87..4c752491a1 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -11,9 +11,6 @@ obj-y += clock.o
obj-y += cpu_info.o
obj-y += dram_helpers.o
obj-y += pinmux.o
-ifndef CONFIG_MACH_SUN9I
-obj-y += usb_phy.o
-endif
obj-$(CONFIG_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_SUN6I_PRCM) += prcm.o
obj-$(CONFIG_AXP_PMIC_BUS) += pmic_bus.o
diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c
deleted file mode 100644
index 318e225528..0000000000
--- a/arch/arm/mach-sunxi/usb_phy.c
+++ /dev/null
@@ -1,406 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Sunxi usb-phy code
- *
- * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
- * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- */
-
-#include <common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/usb_phy.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <errno.h>
-
-#if defined(CONFIG_MACH_SUN4I) || \
- defined(CONFIG_MACH_SUN5I) || \
- defined(CONFIG_MACH_SUN6I) || \
- defined(CONFIG_MACH_SUN7I) || \
- defined(CONFIG_MACH_SUN8I_A23) || \
- defined(CONFIG_MACH_SUN9I)
-#define SUNXI_USB_CSR 0x404
-#else
-#define SUNXI_USB_CSR 0x410
-#endif
-
-#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
-#define SUNXI_USB_PASSBY_EN 1
-
-#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
-#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
-#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
-#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
-
-#define REG_PHY_UNK_H3 0x420
-#define REG_PMU_UNK_H3 0x810
-
-/* A83T specific control bits for PHY0 */
-#define SUNXI_PHY_CTL_VBUSVLDEXT BIT(5)
-#define SUNXI_PHY_CTL_SIDDQ BIT(3)
-
-/* A83T HSIC specific bits */
-#define SUNXI_EHCI_HS_FORCE BIT(20)
-#define SUNXI_EHCI_CONNECT_DET BIT(17)
-#define SUNXI_EHCI_CONNECT_INT BIT(16)
-#define SUNXI_EHCI_HSIC BIT(1)
-
-static struct sunxi_usb_phy {
- int usb_rst_mask;
- int gpio_vbus;
- int gpio_vbus_det;
- int gpio_id_det;
- int id;
- int init_count;
- int power_on_count;
- ulong base;
-} sunxi_usb_phy[] = {
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
- .id = 0,
- .base = SUNXI_USB0_BASE,
- },
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
- .id = 1,
- .base = SUNXI_USB1_BASE,
- },
-#if CONFIG_SUNXI_USB_PHYS >= 3
- {
-#ifdef CONFIG_MACH_SUN8I_A83T
- .usb_rst_mask = CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK |
- CCM_USB_CTRL_12M_CLK,
-#else
- .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
-#endif
- .id = 2,
- .base = SUNXI_USB2_BASE,
- },
-#endif
-#if CONFIG_SUNXI_USB_PHYS >= 4
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY3_RST | CCM_USB_CTRL_PHY3_CLK,
- .id = 3,
- .base = SUNXI_USB3_BASE,
- }
-#endif
-};
-
-static int initial_usb_scan_delay = CONFIG_INITIAL_USB_SCAN_DELAY;
-
-static int get_vbus_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
- case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
- case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
- case 3: return sunxi_name_to_gpio(CONFIG_USB3_VBUS_PIN);
- }
- return -EINVAL;
-}
-
-static int get_vbus_detect_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
- }
- return -EINVAL;
-}
-
-static int get_id_detect_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET);
- }
- return -EINVAL;
-}
-
-__maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
- int data, int len)
-{
- int j = 0, usbc_bit = 0;
- void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
-
-#ifdef CONFIG_MACH_SUN8I_A33
- /* CSR needs to be explicitly initialized to 0 on A33 */
- writel(0, dest);
-#endif
-
- usbc_bit = 1 << (phy->id * 2);
- for (j = 0; j < len; j++) {
- /* set the bit address to be written */
- clrbits_le32(dest, 0xff << 8);
- setbits_le32(dest, (addr + j) << 8);
-
- clrbits_le32(dest, usbc_bit);
- /* set data bit */
- if (data & 0x1)
- setbits_le32(dest, 1 << 7);
- else
- clrbits_le32(dest, 1 << 7);
-
- setbits_le32(dest, usbc_bit);
-
- clrbits_le32(dest, usbc_bit);
-
- data >>= 1;
- }
-}
-
-#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
-static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
-{
-#if defined CONFIG_MACH_SUNXI_H3_H5
- if (phy->id == 0)
- clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
-#endif
- clrbits_le32(phy->base + REG_PMU_UNK_H3, 0x02);
-}
-#elif defined CONFIG_MACH_SUN8I_A83T
-static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
-{
-}
-#else
-static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
-{
- /* The following comments are machine
- * translated from Chinese, you have been warned!
- */
-
- /* Regulation 45 ohms */
- if (phy->id == 0)
- usb_phy_write(phy, 0x0c, 0x01, 1);
-
- /* adjust PHY's magnitude and rate */
- usb_phy_write(phy, 0x20, 0x14, 5);
-
- /* threshold adjustment disconnect */
-#if defined CONFIG_MACH_SUN5I || defined CONFIG_MACH_SUN7I
- usb_phy_write(phy, 0x2a, 2, 2);
-#else
- usb_phy_write(phy, 0x2a, 3, 2);
-#endif
-
- return;
-}
-#endif
-
-static void sunxi_usb_phy_passby(struct sunxi_usb_phy *phy, int enable)
-{
- unsigned long bits = 0;
- void *addr;
-
- addr = (void *)phy->base + SUNXI_USB_PMU_IRQ_ENABLE;
-
- bits = SUNXI_EHCI_AHB_ICHR8_EN |
- SUNXI_EHCI_AHB_INCR4_BURST_EN |
- SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
- SUNXI_EHCI_ULPI_BYPASS_EN;
-
-#ifdef CONFIG_MACH_SUN8I_A83T
- if (phy->id == 2)
- bits |= SUNXI_EHCI_HS_FORCE |
- SUNXI_EHCI_CONNECT_INT |
- SUNXI_EHCI_HSIC;
-#endif
-
- if (enable)
- setbits_le32(addr, bits);
- else
- clrbits_le32(addr, bits);
-
- return;
-}
-
-void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
-{
-#ifndef CONFIG_MACH_SUN8I_A83T
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
-#endif
-}
-
-void sunxi_usb_phy_init(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- phy->init_count++;
- if (phy->init_count != 1)
- return;
-
- setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
-
- sunxi_usb_phy_config(phy);
-
- if (phy->id != 0)
- sunxi_usb_phy_passby(phy, SUNXI_USB_PASSBY_EN);
-
-#ifdef CONFIG_MACH_SUN8I_A83T
- if (phy->id == 0) {
- setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
- SUNXI_PHY_CTL_VBUSVLDEXT);
- clrbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
- SUNXI_PHY_CTL_SIDDQ);
- }
-#endif
-}
-
-void sunxi_usb_phy_exit(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- phy->init_count--;
- if (phy->init_count != 0)
- return;
-
- if (phy->id != 0)
- sunxi_usb_phy_passby(phy, !SUNXI_USB_PASSBY_EN);
-
-#ifdef CONFIG_MACH_SUN8I_A83T
- if (phy->id == 0) {
- setbits_le32(SUNXI_USB0_BASE + SUNXI_USB_CSR,
- SUNXI_PHY_CTL_SIDDQ);
- }
-#endif
-
- clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
-}
-
-void sunxi_usb_phy_power_on(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- if (initial_usb_scan_delay) {
- mdelay(initial_usb_scan_delay);
- initial_usb_scan_delay = 0;
- }
-
- phy->power_on_count++;
- if (phy->power_on_count != 1)
- return;
-
- if (phy->gpio_vbus >= 0)
- gpio_set_value(phy->gpio_vbus, 1);
-}
-
-void sunxi_usb_phy_power_off(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- phy->power_on_count--;
- if (phy->power_on_count != 0)
- return;
-
- if (phy->gpio_vbus >= 0)
- gpio_set_value(phy->gpio_vbus, 0);
-}
-
-int sunxi_usb_phy_vbus_detect(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- int err, retries = 3;
-
- if (phy->gpio_vbus_det < 0)
- return phy->gpio_vbus_det;
-
- err = gpio_get_value(phy->gpio_vbus_det);
- /*
- * Vbus may have been provided by the board and just been turned of
- * some milliseconds ago on reset, what we're measuring then is a
- * residual charge on Vbus, sleep a bit and try again.
- */
- while (err > 0 && retries--) {
- mdelay(100);
- err = gpio_get_value(phy->gpio_vbus_det);
- }
-
- return err;
-}
-
-int sunxi_usb_phy_id_detect(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- if (phy->gpio_id_det < 0)
- return phy->gpio_id_det;
-
- return gpio_get_value(phy->gpio_id_det);
-}
-
-int sunxi_usb_phy_probe(void)
-{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_usb_phy *phy;
- int i, ret = 0;
-
- for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
- phy = &sunxi_usb_phy[i];
-
- phy->gpio_vbus = get_vbus_gpio(i);
- if (phy->gpio_vbus >= 0) {
- ret = gpio_request(phy->gpio_vbus, "usb_vbus");
- if (ret)
- return ret;
- ret = gpio_direction_output(phy->gpio_vbus, 0);
- if (ret)
- return ret;
- }
-
- phy->gpio_vbus_det = get_vbus_detect_gpio(i);
- if (phy->gpio_vbus_det >= 0) {
- ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
- if (ret)
- return ret;
- ret = gpio_direction_input(phy->gpio_vbus_det);
- if (ret)
- return ret;
- }
-
- phy->gpio_id_det = get_id_detect_gpio(i);
- if (phy->gpio_id_det >= 0) {
- ret = gpio_request(phy->gpio_id_det, "usb_id_det");
- if (ret)
- return ret;
- ret = gpio_direction_input(phy->gpio_id_det);
- if (ret)
- return ret;
- sunxi_gpio_set_pull(phy->gpio_id_det,
- SUNXI_GPIO_PULL_UP);
- }
- }
-
- setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
- return 0;
-}
-
-int sunxi_usb_phy_remove(void)
-{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- struct sunxi_usb_phy *phy;
- int i;
-
- clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
- for (i = 0; i < CONFIG_SUNXI_USB_PHYS; i++) {
- phy = &sunxi_usb_phy[i];
-
- if (phy->gpio_vbus >= 0)
- gpio_free(phy->gpio_vbus);
-
- if (phy->gpio_vbus_det >= 0)
- gpio_free(phy->gpio_vbus_det);
-
- if (phy->gpio_id_det >= 0)
- gpio_free(phy->gpio_id_det);
- }
-
- return 0;
-}
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 1bb2fa8f51..e90c87b560 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -116,6 +116,12 @@ M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
F: configs/Ainol_AW1_defconfig
+AMARULA A64-RELIC
+M: Jagan Teki <jagan@amarulasolutions.com>
+S: Maintained
+F: configs/amarula_a64_relic_defconfig
+F: arch/arm/dts/sun50i-a64-amarula-relic.dts
+
AMPE A76 BOARD
M: Paul Kocialkowski <contact@paulk.fr>
S: Maintained
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 3d364c6db5..5ed1b8bae1 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -11,8 +11,11 @@
*/
#include <common.h>
+#include <dm.h>
#include <mmc.h>
#include <axp_pmic.h>
+#include <generic-phy.h>
+#include <phy-sun4i-usb.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/display.h>
@@ -20,7 +23,6 @@
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/spl.h>
-#include <asm/arch/usb_phy.h>
#ifndef CONFIG_ARM64
#include <asm/armv7.h>
#endif
@@ -595,7 +597,35 @@ void sunxi_board_init(void)
#ifdef CONFIG_USB_GADGET
int g_dnl_board_usb_cable_connected(void)
{
- return sunxi_usb_phy_vbus_detect(0);
+ struct udevice *dev;
+ struct phy phy;
+ int ret;
+
+ ret = uclass_get_device(UCLASS_USB_DEV_GENERIC, 0, &dev);
+ if (ret) {
+ pr_err("%s: Cannot find USB device\n", __func__);
+ return ret;
+ }
+
+ ret = generic_phy_get_by_name(dev, "usb", &phy);
+ if (ret) {
+ pr_err("failed to get %s USB PHY\n", dev->name);
+ return ret;
+ }
+
+ ret = generic_phy_init(&phy);
+ if (ret) {
+ pr_err("failed to init %s USB PHY\n", dev->name);
+ return ret;
+ }
+
+ ret = sun4i_usb_phy_vbus_detect(&phy);
+ if (ret == 1) {
+ pr_err("A charger is plugged into the OTG\n");
+ return -ENODEV;
+ }
+
+ return ret;
}
#endif
@@ -743,12 +773,6 @@ int misc_init_r(void)
setup_environment(gd->fdt_blob);
-#ifndef CONFIG_MACH_SUN9I
- ret = sunxi_usb_phy_probe();
- if (ret)
- return ret;
-#endif
-
#ifdef CONFIG_USB_ETHER
usb_ether_init();
#endif
diff --git a/configs/Sinovoip_BPI_M2_Plus_defconfig b/configs/Sinovoip_BPI_M2_Plus_defconfig
index da5620a770..a325e9f806 100644
--- a/configs/Sinovoip_BPI_M2_Plus_defconfig
+++ b/configs/Sinovoip_BPI_M2_Plus_defconfig
@@ -14,4 +14,5 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus"
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/amarula_a64_relic_defconfig b/configs/amarula_a64_relic_defconfig
new file mode 100644
index 0000000000..458f703b58
--- /dev/null
+++ b/configs/amarula_a64_relic_defconfig
@@ -0,0 +1,17 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I=y
+CONFIG_DRAM_ODT_EN=y
+CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-amarula-relic"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_VIDEO_DE2 is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
index 47f31c6d9d..40c1c18aca 100644
--- a/configs/bananapi_m64_defconfig
+++ b/configs/bananapi_m64_defconfig
@@ -12,4 +12,5 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64"
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig
index dd5f2c78ab..ca1e586e89 100644
--- a/configs/orangepi_pc2_defconfig
+++ b/configs/orangepi_pc2_defconfig
@@ -13,4 +13,5 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-pc2"
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig
index df39caa903..6161863258 100644
--- a/configs/orangepi_prime_defconfig
+++ b/configs/orangepi_prime_defconfig
@@ -11,4 +11,5 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-prime"
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
diff --git a/doc/device-tree-bindings/phy/sun4i-usb-phy.txt b/doc/device-tree-bindings/phy/sun4i-usb-phy.txt
new file mode 100644
index 0000000000..c1ce5a0a65
--- /dev/null
+++ b/doc/device-tree-bindings/phy/sun4i-usb-phy.txt
@@ -0,0 +1,65 @@
+Allwinner sun4i USB PHY
+-----------------------
+
+Required properties:
+- compatible : should be one of
+ * allwinner,sun4i-a10-usb-phy
+ * allwinner,sun5i-a13-usb-phy
+ * allwinner,sun6i-a31-usb-phy
+ * allwinner,sun7i-a20-usb-phy
+ * allwinner,sun8i-a23-usb-phy
+ * allwinner,sun8i-a33-usb-phy
+ * allwinner,sun8i-a83t-usb-phy
+ * allwinner,sun8i-h3-usb-phy
+ * allwinner,sun8i-v3s-usb-phy
+ * allwinner,sun50i-a64-usb-phy
+- reg : a list of offset + length pairs
+- reg-names :
+ * "phy_ctrl"
+ * "pmu0" for H3, V3s and A64
+ * "pmu1"
+ * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
+ * "pmu3" for sun8i-h3
+- #phy-cells : from the generic phy bindings, must be 1
+- clocks : phandle + clock specifier for the phy clocks
+- clock-names :
+ * "usb_phy" for sun4i, sun5i or sun7i
+ * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
+ * "usb0_phy", "usb1_phy" for sun8i
+ * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t
+ * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3
+- resets : a list of phandle + reset specifier pairs
+- reset-names :
+ * "usb0_reset"
+ * "usb1_reset"
+ * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
+ * "usb3_reset" for sun8i-h3
+
+Optional properties:
+- usb0_id_det-gpios : gpio phandle for reading the otg id pin value
+- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus
+- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect
+- usb0_vbus-supply : regulator phandle for controller usb0 vbus
+- usb1_vbus-supply : regulator phandle for controller usb1 vbus
+- usb2_vbus-supply : regulator phandle for controller usb2 vbus
+- usb3_vbus-supply : regulator phandle for controller usb3 vbus
+
+Example:
+ usbphy: phy@01c13400 {
+ #phy-cells = <1>;
+ compatible = "allwinner,sun4i-a10-usb-phy";
+ /* phy base regs, phy1 pmu reg, phy2 pmu reg */
+ reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+ reg-names = "phy_ctrl", "pmu1", "pmu2";
+ clocks = <&usb_clk 8>;
+ clock-names = "usb_phy";
+ resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
+ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ };
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 8424898dbd..9e21b28750 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -62,6 +62,8 @@ source "drivers/pcmcia/Kconfig"
source "drivers/phy/Kconfig"
+source "drivers/phy/allwinner/Kconfig"
+
source "drivers/phy/marvell/Kconfig"
source "drivers/pinctrl/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index d29a6e467b..a213ea9671 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -80,6 +80,7 @@ obj-$(CONFIG_NVME) += nvme/
obj-y += pcmcia/
obj-y += dfu/
obj-$(CONFIG_X86) += pch/
+obj-y += phy/allwinner/
obj-y += phy/marvell/
obj-y += rtc/
obj-y += scsi/
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
new file mode 100644
index 0000000000..dba3bae61c
--- /dev/null
+++ b/drivers/phy/allwinner/Kconfig
@@ -0,0 +1,13 @@
+#
+# Phy drivers for Allwinner platforms
+#
+config PHY_SUN4I_USB
+ bool "Allwinner Sun4I USB PHY driver"
+ depends on ARCH_SUNXI
+ select PHY
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sunxi SoCs.
+
+ This driver controls the entire USB PHY block, both the USB OTG
+ parts, as well as the 2 regular USB 2 host PHYs.
diff --git a/drivers/phy/allwinner/Makefile b/drivers/phy/allwinner/Makefile
new file mode 100644
index 0000000000..5ed2702e4f
--- /dev/null
+++ b/drivers/phy/allwinner/Makefile
@@ -0,0 +1,6 @@
+# Copyright (C) 2016 Amarula Solutions
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
new file mode 100644
index 0000000000..2b3cf48025
--- /dev/null
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -0,0 +1,575 @@
+/*
+ * Allwinner sun4i USB PHY driver
+ *
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
+ *
+ * Modelled arch/arm/mach-sunxi/usb_phy.c to compatible with generic-phy.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <dm/device.h>
+#include <generic-phy.h>
+#include <phy-sun4i-usb.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+
+#define REG_ISCR 0x00
+#define REG_PHYCTL_A10 0x04
+#define REG_PHYBIST 0x08
+#define REG_PHYTUNE 0x0c
+#define REG_PHYCTL_A33 0x10
+#define REG_PHY_OTGCTL 0x20
+#define REG_PMU_UNK1 0x10
+
+/* Common Control Bits for Both PHYs */
+#define PHY_PLL_BW 0x03
+#define PHY_RES45_CAL_EN 0x0c
+
+/* Private Control Bits for Each PHY */
+#define PHY_TX_AMPLITUDE_TUNE 0x20
+#define PHY_TX_SLEWRATE_TUNE 0x22
+#define PHY_DISCON_TH_SEL 0x2a
+#define PHY_SQUELCH_DETECT 0x3c
+
+#define PHYCTL_DATA BIT(7)
+#define OTGCTL_ROUTE_MUSB BIT(0)
+
+#define PHY_TX_RATE BIT(4)
+#define PHY_TX_MAGNITUDE BIT(2)
+#define PHY_TX_AMPLITUDE_LEN 5
+
+#define PHY_RES45_CAL_DATA BIT(0)
+#define PHY_RES45_CAL_LEN 1
+#define PHY_DISCON_TH_LEN 2
+
+#define SUNXI_AHB_ICHR8_EN BIT(10)
+#define SUNXI_AHB_INCR4_BURST_EN BIT(9)
+#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8)
+#define SUNXI_ULPI_BYPASS_EN BIT(0)
+
+/* A83T specific control bits for PHY0 */
+#define PHY_CTL_VBUSVLDEXT BIT(5)
+#define PHY_CTL_SIDDQ BIT(3)
+
+/* A83T specific control bits for PHY2 HSIC */
+#define SUNXI_EHCI_HS_FORCE BIT(20)
+#define SUNXI_HSIC_CONNECT_INT BIT(16)
+#define SUNXI_HSIC BIT(1)
+
+#define MAX_PHYS 4
+
+enum sun4i_usb_phy_type {
+ sun4i_a10_phy,
+ sun6i_a31_phy,
+ sun8i_a33_phy,
+ sun8i_a83t_phy,
+ sun8i_h3_phy,
+ sun8i_v3s_phy,
+ sun50i_a64_phy,
+};
+
+struct sun4i_usb_phy_cfg {
+ int num_phys;
+ enum sun4i_usb_phy_type type;
+ u32 disc_thresh;
+ u8 phyctl_offset;
+ bool enable_pmu_unk1;
+ bool phy0_dual_route;
+};
+
+struct sun4i_usb_phy_info {
+ const char *gpio_vbus;
+ const char *gpio_vbus_det;
+ const char *gpio_id_det;
+ int rst_mask;
+} phy_info[] = {
+ {
+ .gpio_vbus = CONFIG_USB0_VBUS_PIN,
+ .gpio_vbus_det = CONFIG_USB0_VBUS_DET,
+ .gpio_id_det = CONFIG_USB0_ID_DET,
+ .rst_mask = (CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK),
+ },
+ {
+ .gpio_vbus = CONFIG_USB1_VBUS_PIN,
+ .gpio_vbus_det = NULL,
+ .gpio_id_det = NULL,
+ .rst_mask = (CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK),
+ },
+ {
+ .gpio_vbus = CONFIG_USB2_VBUS_PIN,
+ .gpio_vbus_det = NULL,
+ .gpio_id_det = NULL,
+#ifdef CONFIG_MACH_SUN8I_A83T
+ .rst_mask = (CCM_USB_CTRL_HSIC_RST | CCM_USB_CTRL_HSIC_CLK |
+ CCM_USB_CTRL_12M_CLK),
+#else
+ .rst_mask = (CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK),
+#endif
+ },
+ {
+ .gpio_vbus = CONFIG_USB3_VBUS_PIN,
+ .gpio_vbus_det = NULL,
+ .gpio_id_det = NULL,
+#ifdef CONFIG_MACH_SUN6I
+ .rst_mask = (CCM_USB_CTRL_PHY3_RST | CCM_USB_CTRL_PHY3_CLK),
+#endif
+ },
+};
+
+struct sun4i_usb_phy_plat {
+ void __iomem *pmu;
+ int power_on_count;
+ int gpio_vbus;
+ int gpio_vbus_det;
+ int gpio_id_det;
+ int rst_mask;
+ int id;
+};
+
+struct sun4i_usb_phy_data {
+ void __iomem *base;
+ struct sunxi_ccm_reg *ccm;
+ const struct sun4i_usb_phy_cfg *cfg;
+ struct sun4i_usb_phy_plat *usb_phy;
+};
+
+static int initial_usb_scan_delay = CONFIG_INITIAL_USB_SCAN_DELAY;
+
+static void sun4i_usb_phy_write(struct phy *phy, u32 addr, u32 data, int len)
+{
+ struct sun4i_usb_phy_data *phy_data = dev_get_priv(phy->dev);
+ struct sun4i_usb_phy_plat *usb_phy = &phy_data->usb_phy[phy->id];
+ u32 temp, usbc_bit = BIT(usb_phy->id * 2);
+ void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
+ int i;
+
+ if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
+ /* SoCs newer than A33 need us to set phyctl to 0 explicitly */
+ writel(0, phyctl);
+ }
+
+ for (i = 0; i < len; i++) {
+ temp = readl(phyctl);
+
+ /* clear the address portion */
+ temp &= ~(0xff << 8);
+
+ /* set the address */
+ temp |= ((addr + i) << 8);
+ writel(temp, phyctl);
+
+ /* set the data bit and clear usbc bit*/
+ temp = readb(phyctl);
+ if (data & 0x1)
+ temp |= PHYCTL_DATA;
+ else
+ temp &= ~PHYCTL_DATA;
+ temp &= ~usbc_bit;
+ writeb(temp, phyctl);
+
+ /* pulse usbc_bit */
+ temp = readb(phyctl);
+ temp |= usbc_bit;
+ writeb(temp, phyctl);
+
+ temp = readb(phyctl);
+ temp &= ~usbc_bit;
+ writeb(temp, phyctl);
+
+ data >>= 1;
+ }
+}
+
+static void sun4i_usb_phy_passby(struct phy *phy, bool enable)
+{
+ struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
+ struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
+ u32 bits, reg_value;
+
+ if (!usb_phy->pmu)
+ return;
+
+ bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
+ SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
+
+ /* A83T USB2 is HSIC */
+ if (data->cfg->type == sun8i_a83t_phy && usb_phy->id == 2)
+ bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT |
+ SUNXI_HSIC;
+
+ reg_value = readl(usb_phy->pmu);
+
+ if (enable)
+ reg_value |= bits;
+ else
+ reg_value &= ~bits;
+
+ writel(reg_value, usb_phy->pmu);
+}
+
+static int sun4i_usb_phy_power_on(struct phy *phy)
+{
+ struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
+ struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
+
+ if (initial_usb_scan_delay) {
+ mdelay(initial_usb_scan_delay);
+ initial_usb_scan_delay = 0;
+ }
+
+ usb_phy->power_on_count++;
+ if (usb_phy->power_on_count != 1)
+ return 0;
+
+ if (usb_phy->gpio_vbus >= 0)
+ gpio_set_value(usb_phy->gpio_vbus, SUNXI_GPIO_PULL_UP);
+
+ return 0;
+}
+
+static int sun4i_usb_phy_power_off(struct phy *phy)
+{
+ struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
+ struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
+
+ usb_phy->power_on_count--;
+ if (usb_phy->power_on_count != 0)
+ return 0;
+
+ if (usb_phy->gpio_vbus >= 0)
+ gpio_set_value(usb_phy->gpio_vbus, SUNXI_GPIO_PULL_DISABLE);
+
+ return 0;
+}
+
+static void sun4i_usb_phy0_reroute(struct sun4i_usb_phy_data *data, bool id_det)
+{
+ u32 regval;
+
+ regval = readl(data->base + REG_PHY_OTGCTL);
+ if (!id_det) {
+ /* Host mode. Route phy0 to EHCI/OHCI */
+ regval &= ~OTGCTL_ROUTE_MUSB;
+ } else {
+ /* Peripheral mode. Route phy0 to MUSB */
+ regval |= OTGCTL_ROUTE_MUSB;
+ }
+ writel(regval, data->base + REG_PHY_OTGCTL);
+}
+
+static int sun4i_usb_phy_init(struct phy *phy)
+{
+ struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
+ struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
+ u32 val;
+
+ setbits_le32(&data->ccm->usb_clk_cfg, usb_phy->rst_mask);
+
+ if (data->cfg->type == sun8i_a83t_phy) {
+ if (phy->id == 0) {
+ val = readl(data->base + data->cfg->phyctl_offset);
+ val |= PHY_CTL_VBUSVLDEXT;
+ val &= ~PHY_CTL_SIDDQ;
+ writel(val, data->base + data->cfg->phyctl_offset);
+ }
+ } else {
+ if (usb_phy->pmu && data->cfg->enable_pmu_unk1) {
+ val = readl(usb_phy->pmu + REG_PMU_UNK1);
+ writel(val & ~2, usb_phy->pmu + REG_PMU_UNK1);
+ }
+
+ if (usb_phy->id == 0)
+ sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN,
+ PHY_RES45_CAL_DATA,
+ PHY_RES45_CAL_LEN);
+
+ /* Adjust PHY's magnitude and rate */
+ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE,
+ PHY_TX_MAGNITUDE | PHY_TX_RATE,
+ PHY_TX_AMPLITUDE_LEN);
+
+ /* Disconnect threshold adjustment */
+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL,
+ data->cfg->disc_thresh, PHY_DISCON_TH_LEN);
+ }
+
+ if (usb_phy->id != 0)
+ sun4i_usb_phy_passby(phy, true);
+
+ sun4i_usb_phy0_reroute(data, true);
+
+ return 0;
+}
+
+static int sun4i_usb_phy_exit(struct phy *phy)
+{
+ struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
+ struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
+
+ if (phy->id == 0) {
+ if (data->cfg->type == sun8i_a83t_phy) {
+ void __iomem *phyctl = data->base +
+ data->cfg->phyctl_offset;
+
+ writel(readl(phyctl) | PHY_CTL_SIDDQ, phyctl);
+ }
+ }
+
+ sun4i_usb_phy_passby(phy, false);
+
+ clrbits_le32(&data->ccm->usb_clk_cfg, usb_phy->rst_mask);
+
+ return 0;
+}
+
+static int sun4i_usb_phy_xlate(struct phy *phy,
+ struct ofnode_phandle_args *args)
+{
+ struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
+
+ if (args->args_count >= data->cfg->num_phys)
+ return -EINVAL;
+
+ if (args->args_count)
+ phy->id = args->args[0];
+ else
+ phy->id = 0;
+
+ debug("%s: phy_id = %ld\n", __func__, phy->id);
+ return 0;
+}
+
+int sun4i_usb_phy_vbus_detect(struct phy *phy)
+{
+ struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
+ struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
+ int err, retries = 3;
+
+ debug("%s: id_det = %d\n", __func__, usb_phy->gpio_id_det);
+
+ if (usb_phy->gpio_vbus_det < 0)
+ return usb_phy->gpio_vbus_det;
+
+ err = gpio_get_value(usb_phy->gpio_vbus_det);
+ /*
+ * Vbus may have been provided by the board and just been turned of
+ * some milliseconds ago on reset, what we're measuring then is a
+ * residual charge on Vbus, sleep a bit and try again.
+ */
+ while (err > 0 && retries--) {
+ mdelay(100);
+ err = gpio_get_value(usb_phy->gpio_vbus_det);
+ }
+
+ return err;
+}
+
+int sun4i_usb_phy_id_detect(struct phy *phy)
+{
+ struct sun4i_usb_phy_data *data = dev_get_priv(phy->dev);
+ struct sun4i_usb_phy_plat *usb_phy = &data->usb_phy[phy->id];
+
+ debug("%s: id_det = %d\n", __func__, usb_phy->gpio_id_det);
+
+ if (usb_phy->gpio_id_det < 0)
+ return usb_phy->gpio_id_det;
+
+ return gpio_get_value(usb_phy->gpio_id_det);
+}
+
+void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled)
+{
+ sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2);
+}
+
+static struct phy_ops sun4i_usb_phy_ops = {
+ .of_xlate = sun4i_usb_phy_xlate,
+ .init = sun4i_usb_phy_init,
+ .power_on = sun4i_usb_phy_power_on,
+ .power_off = sun4i_usb_phy_power_off,
+ .exit = sun4i_usb_phy_exit,
+};
+
+static int sun4i_usb_phy_probe(struct udevice *dev)
+{
+ struct sun4i_usb_phy_plat *plat = dev_get_platdata(dev);
+ struct sun4i_usb_phy_data *data = dev_get_priv(dev);
+ int i, ret;
+
+ data->cfg = (const struct sun4i_usb_phy_cfg *)dev_get_driver_data(dev);
+ if (!data->cfg)
+ return -EINVAL;
+
+ data->base = (void __iomem *)devfdt_get_addr_name(dev, "phy_ctrl");
+ if (IS_ERR(data->base))
+ return PTR_ERR(data->base);
+
+ data->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ if (IS_ERR(data->ccm))
+ return PTR_ERR(data->ccm);
+
+ data->usb_phy = plat;
+ for (i = 0; i < data->cfg->num_phys; i++) {
+ struct sun4i_usb_phy_plat *phy = &plat[i];
+ struct sun4i_usb_phy_info *info = &phy_info[i];
+ char name[16];
+
+ phy->gpio_vbus = sunxi_name_to_gpio(info->gpio_vbus);
+ if (phy->gpio_vbus >= 0) {
+ ret = gpio_request(phy->gpio_vbus, "usb_vbus");
+ if (ret)
+ return ret;
+ ret = gpio_direction_output(phy->gpio_vbus, 0);
+ if (ret)
+ return ret;
+ }
+
+ phy->gpio_vbus_det = sunxi_name_to_gpio(info->gpio_vbus_det);
+ if (phy->gpio_vbus_det >= 0) {
+ ret = gpio_request(phy->gpio_vbus_det, "usb_vbus_det");
+ if (ret)
+ return ret;
+ ret = gpio_direction_input(phy->gpio_vbus_det);
+ if (ret)
+ return ret;
+ }
+
+ phy->gpio_id_det = sunxi_name_to_gpio(info->gpio_id_det);
+ if (phy->gpio_id_det >= 0) {
+ ret = gpio_request(phy->gpio_id_det, "usb_id_det");
+ if (ret)
+ return ret;
+ ret = gpio_direction_input(phy->gpio_id_det);
+ if (ret)
+ return ret;
+ sunxi_gpio_set_pull(phy->gpio_id_det, SUNXI_GPIO_PULL_UP);
+ }
+
+ if (i || data->cfg->phy0_dual_route) {
+ snprintf(name, sizeof(name), "pmu%d", i);
+ phy->pmu = (void __iomem *)devfdt_get_addr_name(dev, name);
+ if (IS_ERR(phy->pmu))
+ return PTR_ERR(phy->pmu);
+ }
+
+ phy->id = i;
+ phy->rst_mask = info->rst_mask;
+ };
+
+ setbits_le32(&data->ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+
+ debug("Allwinner Sun4I USB PHY driver loaded\n");
+ return 0;
+}
+
+static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
+ .num_phys = 3,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
+ .num_phys = 2,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 2,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
+ .num_phys = 3,
+ .type = sun6i_a31_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
+ .num_phys = 3,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 2,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
+ .num_phys = 2,
+ .type = sun4i_a10_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A10,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
+ .num_phys = 2,
+ .type = sun8i_a33_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .enable_pmu_unk1 = false,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
+ .num_phys = 3,
+ .type = sun8i_a83t_phy,
+ .phyctl_offset = REG_PHYCTL_A33,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
+ .num_phys = 4,
+ .type = sun8i_h3_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .enable_pmu_unk1 = true,
+ .phy0_dual_route = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
+ .num_phys = 1,
+ .type = sun8i_v3s_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .enable_pmu_unk1 = true,
+ .phy0_dual_route = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
+ .num_phys = 2,
+ .type = sun50i_a64_phy,
+ .disc_thresh = 3,
+ .phyctl_offset = REG_PHYCTL_A33,
+ .enable_pmu_unk1 = true,
+ .phy0_dual_route = true,
+};
+
+static const struct udevice_id sun4i_usb_phy_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-usb-phy", .data = (ulong)&sun4i_a10_cfg },
+ { .compatible = "allwinner,sun5i-a13-usb-phy", .data = (ulong)&sun5i_a13_cfg },
+ { .compatible = "allwinner,sun6i-a31-usb-phy", .data = (ulong)&sun6i_a31_cfg },
+ { .compatible = "allwinner,sun7i-a20-usb-phy", .data = (ulong)&sun7i_a20_cfg },
+ { .compatible = "allwinner,sun8i-a23-usb-phy", .data = (ulong)&sun8i_a23_cfg },
+ { .compatible = "allwinner,sun8i-a33-usb-phy", .data = (ulong)&sun8i_a33_cfg },
+ { .compatible = "allwinner,sun8i-a83t-usb-phy", .data = (ulong)&sun8i_a83t_cfg },
+ { .compatible = "allwinner,sun8i-h3-usb-phy", .data = (ulong)&sun8i_h3_cfg },
+ { .compatible = "allwinner,sun8i-v3s-usb-phy", .data = (ulong)&sun8i_v3s_cfg },
+ { .compatible = "allwinner,sun50i-a64-usb-phy", .data = (ulong)&sun50i_a64_cfg},
+ { }
+};
+
+U_BOOT_DRIVER(sun4i_usb_phy) = {
+ .name = "sun4i_usb_phy",
+ .id = UCLASS_PHY,
+ .of_match = sun4i_usb_phy_ids,
+ .ops = &sun4i_usb_phy_ops,
+ .probe = sun4i_usb_phy_probe,
+ .platdata_auto_alloc_size = sizeof(struct sun4i_usb_phy_plat[MAX_PHYS]),
+ .priv_auto_alloc_size = sizeof(struct sun4i_usb_phy_data),
+};
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index 1297fdb6a7..360efc9116 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -11,34 +11,62 @@
#include <common.h>
#include <asm/arch/clock.h>
-#include <asm/arch/usb_phy.h>
#include <asm/io.h>
#include <dm.h>
#include "ehci.h"
+#include <generic-phy.h>
#ifdef CONFIG_SUNXI_GEN_SUN4I
-#define BASE_DIST 0x8000
#define AHB_CLK_DIST 2
#else
-#define BASE_DIST 0x1000
#define AHB_CLK_DIST 1
#endif
struct ehci_sunxi_priv {
struct ehci_ctrl ehci;
+ struct sunxi_ccm_reg *ccm;
int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
- int phy_index; /* Index of the usb-phy attached to this hcd */
+ struct phy phy;
};
static int ehci_usb_probe(struct udevice *dev)
{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct usb_platdata *plat = dev_get_platdata(dev);
struct ehci_sunxi_priv *priv = dev_get_priv(dev);
struct ehci_hccr *hccr = (struct ehci_hccr *)devfdt_get_addr(dev);
struct ehci_hcor *hcor;
int extra_ahb_gate_mask = 0;
+ int phys, ret;
+ priv->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ if (IS_ERR(priv->ccm))
+ return PTR_ERR(priv->ccm);
+
+ phys = dev_count_phandle_with_args(dev, "phys", "#phy-cells");
+ if (phys < 0) {
+ phys = 0;
+ goto no_phy;
+ }
+
+ ret = generic_phy_get_by_name(dev, "usb", &priv->phy);
+ if (ret) {
+ pr_err("failed to get %s usb PHY\n", dev->name);
+ return ret;
+ }
+
+ ret = generic_phy_init(&priv->phy);
+ if (ret) {
+ pr_err("failed to init %s USB PHY\n", dev->name);
+ return ret;
+ }
+
+ ret = generic_phy_power_on(&priv->phy);
+ if (ret) {
+ pr_err("failed to power on %s USB PHY\n", dev->name);
+ return ret;
+ }
+
+no_phy:
/*
* This should go away once we've moved to the driver model for
* clocks resp. phys.
@@ -47,21 +75,16 @@ static int ehci_usb_probe(struct udevice *dev)
#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
#endif
- priv->phy_index = ((uintptr_t)hccr - SUNXI_USB1_BASE) / BASE_DIST;
- priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
- extra_ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
- priv->phy_index++; /* Non otg phys start at 1 */
+ priv->ahb_gate_mask <<= phys * AHB_CLK_DIST;
+ extra_ahb_gate_mask <<= phys * AHB_CLK_DIST;
- setbits_le32(&ccm->ahb_gate0,
+ setbits_le32(&priv->ccm->ahb_gate0,
priv->ahb_gate_mask | extra_ahb_gate_mask);
#ifdef CONFIG_SUNXI_GEN_SUN6I
- setbits_le32(&ccm->ahb_reset0_cfg,
+ setbits_le32(&priv->ccm->ahb_reset0_cfg,
priv->ahb_gate_mask | extra_ahb_gate_mask);
#endif
- sunxi_usb_phy_init(priv->phy_index);
- sunxi_usb_phy_power_on(priv->phy_index);
-
hcor = (struct ehci_hcor *)((uintptr_t)hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
@@ -70,20 +93,25 @@ static int ehci_usb_probe(struct udevice *dev)
static int ehci_usb_remove(struct udevice *dev)
{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct ehci_sunxi_priv *priv = dev_get_priv(dev);
int ret;
+ if (generic_phy_valid(&priv->phy)) {
+ ret = generic_phy_exit(&priv->phy);
+ if (ret) {
+ pr_err("failed to exit %s USB PHY\n", dev->name);
+ return ret;
+ }
+ }
+
ret = ehci_deregister(dev);
if (ret)
return ret;
- sunxi_usb_phy_exit(priv->phy_index);
-
#ifdef CONFIG_SUNXI_GEN_SUN6I
- clrbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
+ clrbits_le32(&priv->ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
#endif
- clrbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
+ clrbits_le32(&priv->ccm->ahb_gate0, priv->ahb_gate_mask);
return 0;
}
diff --git a/drivers/usb/host/ohci-sunxi.c b/drivers/usb/host/ohci-sunxi.c
index b78fad29a3..ce2b47a5c4 100644
--- a/drivers/usb/host/ohci-sunxi.c
+++ b/drivers/usb/host/ohci-sunxi.c
@@ -10,35 +10,63 @@
#include <common.h>
#include <asm/arch/clock.h>
-#include <asm/arch/usb_phy.h>
#include <asm/io.h>
#include <dm.h>
#include <usb.h>
#include "ohci.h"
+#include <generic-phy.h>
#ifdef CONFIG_SUNXI_GEN_SUN4I
-#define BASE_DIST 0x8000
#define AHB_CLK_DIST 2
#else
-#define BASE_DIST 0x1000
#define AHB_CLK_DIST 1
#endif
struct ohci_sunxi_priv {
+ struct sunxi_ccm_reg *ccm;
ohci_t ohci;
int ahb_gate_mask; /* Mask of ahb_gate0 clk gate bits for this hcd */
int usb_gate_mask; /* Mask of usb_clk_cfg clk gate bits for this hcd */
- int phy_index; /* Index of the usb-phy attached to this hcd */
+ struct phy phy;
};
static int ohci_usb_probe(struct udevice *dev)
{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev);
struct ohci_sunxi_priv *priv = dev_get_priv(dev);
struct ohci_regs *regs = (struct ohci_regs *)devfdt_get_addr(dev);
int extra_ahb_gate_mask = 0;
+ int phys, ret;
+ priv->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ if (IS_ERR(priv->ccm))
+ return PTR_ERR(priv->ccm);
+
+ phys = dev_count_phandle_with_args(dev, "phys", "#phy-cells");
+ if (phys < 0) {
+ phys = 0;
+ goto no_phy;
+ }
+
+ ret = generic_phy_get_by_name(dev, "usb", &priv->phy);
+ if (ret) {
+ pr_err("failed to get %s usb PHY\n", dev->name);
+ return ret;
+ }
+
+ ret = generic_phy_init(&priv->phy);
+ if (ret) {
+ pr_err("failed to init %s USB PHY\n", dev->name);
+ return ret;
+ }
+
+ ret = generic_phy_power_on(&priv->phy);
+ if (ret) {
+ pr_err("failed to power on %s USB PHY\n", dev->name);
+ return ret;
+ }
+
+no_phy:
bus_priv->companion = true;
/*
@@ -50,43 +78,43 @@ static int ohci_usb_probe(struct udevice *dev)
extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
#endif
priv->usb_gate_mask = CCM_USB_CTRL_OHCI0_CLK;
- priv->phy_index = ((uintptr_t)regs - (SUNXI_USB1_BASE + 0x400)) / BASE_DIST;
- priv->ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
- extra_ahb_gate_mask <<= priv->phy_index * AHB_CLK_DIST;
- priv->usb_gate_mask <<= priv->phy_index;
- priv->phy_index++; /* Non otg phys start at 1 */
+ priv->ahb_gate_mask <<= phys * AHB_CLK_DIST;
+ extra_ahb_gate_mask <<= phys * AHB_CLK_DIST;
+ priv->usb_gate_mask <<= phys;
- setbits_le32(&ccm->ahb_gate0,
+ setbits_le32(&priv->ccm->ahb_gate0,
priv->ahb_gate_mask | extra_ahb_gate_mask);
- setbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
+ setbits_le32(&priv->ccm->usb_clk_cfg, priv->usb_gate_mask);
#ifdef CONFIG_SUNXI_GEN_SUN6I
- setbits_le32(&ccm->ahb_reset0_cfg,
+ setbits_le32(&priv->ccm->ahb_reset0_cfg,
priv->ahb_gate_mask | extra_ahb_gate_mask);
#endif
- sunxi_usb_phy_init(priv->phy_index);
- sunxi_usb_phy_power_on(priv->phy_index);
-
return ohci_register(dev, regs);
}
static int ohci_usb_remove(struct udevice *dev)
{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct ohci_sunxi_priv *priv = dev_get_priv(dev);
int ret;
+ if (generic_phy_valid(&priv->phy)) {
+ ret = generic_phy_exit(&priv->phy);
+ if (ret) {
+ pr_err("failed to exit %s USB PHY\n", dev->name);
+ return ret;
+ }
+ }
+
ret = ohci_deregister(dev);
if (ret)
return ret;
- sunxi_usb_phy_exit(priv->phy_index);
-
#ifdef CONFIG_SUNXI_GEN_SUN6I
- clrbits_le32(&ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
+ clrbits_le32(&priv->ccm->ahb_reset0_cfg, priv->ahb_gate_mask);
#endif
- clrbits_le32(&ccm->usb_clk_cfg, priv->usb_gate_mask);
- clrbits_le32(&ccm->ahb_gate0, priv->ahb_gate_mask);
+ clrbits_le32(&priv->ccm->usb_clk_cfg, priv->usb_gate_mask);
+ clrbits_le32(&priv->ccm->ahb_gate0, priv->ahb_gate_mask);
return 0;
}
diff --git a/drivers/usb/musb-new/musb_core.h b/drivers/usb/musb-new/musb_core.h
index fa4cf86c79..821d0e06f6 100644
--- a/drivers/usb/musb-new/musb_core.h
+++ b/drivers/usb/musb-new/musb_core.h
@@ -200,6 +200,8 @@ enum musb_g_ep0_state {
* @vbus_status: returns vbus status if possible
* @set_vbus: forces vbus status
* @adjust_channel_params: pre check for standard dma channel_program func
+ * @pre_root_reset_end: called before the root usb port reset flag gets cleared
+ * @post_root_reset_end: called after the root usb port reset flag gets cleared
*/
struct musb_platform_ops {
int (*init)(struct musb *musb);
@@ -221,6 +223,8 @@ struct musb_platform_ops {
int (*adjust_channel_params)(struct dma_channel *channel,
u16 packet_sz, u8 *mode,
dma_addr_t *dma_addr, u32 *len);
+ void (*pre_root_reset_end)(struct musb *musb);
+ void (*post_root_reset_end)(struct musb *musb);
};
/*
diff --git a/drivers/usb/musb-new/musb_regs.h b/drivers/usb/musb-new/musb_regs.h
index ab0d98e7c4..c4d7203b85 100644
--- a/drivers/usb/musb-new/musb_regs.h
+++ b/drivers/usb/musb-new/musb_regs.h
@@ -431,7 +431,8 @@ static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
static inline u8 musb_read_configdata(void __iomem *mbase)
{
-#if defined CONFIG_MACH_SUN8I_A33 || defined CONFIG_MACH_SUN8I_A83T
+#if defined CONFIG_MACH_SUN8I_A33 || defined CONFIG_MACH_SUN8I_A83T || \
+ defined CONFIG_MACH_SUNXI_H3_H5 || defined CONFIG_MACH_SUN50I
/* <Sigh> allwinner saves a reg, and we need to hardcode this */
return 0xde;
#else
diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c
index 8662c0ff70..2b04fbd046 100644
--- a/drivers/usb/musb-new/musb_uboot.c
+++ b/drivers/usb/musb-new/musb_uboot.c
@@ -1,9 +1,6 @@
#include <common.h>
#include <console.h>
#include <watchdog.h>
-#ifdef CONFIG_ARCH_SUNXI
-#include <asm/arch/usb_phy.h>
-#endif
#include <linux/errno.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
@@ -193,19 +190,16 @@ static int _musb_reset_root_port(struct musb_host_data *host,
power &= 0xf0;
musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power);
mdelay(50);
-#ifdef CONFIG_ARCH_SUNXI
- /*
- * sunxi phy has a bug and it will wrongly detect high speed squelch
- * when clearing reset on low-speed devices, temporary disable
- * squelch detection to work around this.
- */
- sunxi_usb_phy_enable_squelch_detect(0, 0);
-#endif
+
+ if (host->host->ops->pre_root_reset_end)
+ host->host->ops->pre_root_reset_end(host->host);
+
power = musb_readb(mbase, MUSB_POWER);
musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power);
-#ifdef CONFIG_ARCH_SUNXI
- sunxi_usb_phy_enable_squelch_detect(0, 1);
-#endif
+
+ if (host->host->ops->post_root_reset_end)
+ host->host->ops->post_root_reset_end(host->host);
+
host->host->isr(0, host->host);
host->host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ?
USB_SPEED_HIGH :
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index f55368b601..08de9c69c7 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -17,10 +17,11 @@
*/
#include <common.h>
#include <dm.h>
+#include <generic-phy.h>
+#include <phy-sun4i-usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/usb_phy.h>
#include <asm-generic/gpio.h>
#include <dm/lists.h>
#include <dm/root.h>
@@ -75,13 +76,28 @@
* From usbc/usbc.c
******************************************************************************/
+struct sunxi_musb_config {
+ struct musb_hdrc_config *config;
+ u8 rst_bit;
+ u8 clkgate_bit;
+};
+
+struct sunxi_glue {
+ struct musb_host_data mdata;
+ struct sunxi_ccm_reg *ccm;
+ struct sunxi_musb_config *cfg;
+ struct device dev;
+ struct phy *phy;
+};
+#define to_sunxi_glue(d) container_of(d, struct sunxi_glue, dev)
+
static u32 USBC_WakeUp_ClearChangeDetect(u32 reg_val)
{
u32 temp = reg_val;
- temp &= ~(1 << USBC_BP_ISCR_VBUS_CHANGE_DETECT);
- temp &= ~(1 << USBC_BP_ISCR_ID_CHANGE_DETECT);
- temp &= ~(1 << USBC_BP_ISCR_DPDM_CHANGE_DETECT);
+ temp &= ~BIT(USBC_BP_ISCR_VBUS_CHANGE_DETECT);
+ temp &= ~BIT(USBC_BP_ISCR_ID_CHANGE_DETECT);
+ temp &= ~BIT(USBC_BP_ISCR_DPDM_CHANGE_DETECT);
return temp;
}
@@ -91,7 +107,7 @@ static void USBC_EnableIdPullUp(__iomem void *base)
u32 reg_val;
reg_val = musb_readl(base, USBC_REG_o_ISCR);
- reg_val |= (1 << USBC_BP_ISCR_ID_PULLUP_EN);
+ reg_val |= BIT(USBC_BP_ISCR_ID_PULLUP_EN);
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
musb_writel(base, USBC_REG_o_ISCR, reg_val);
}
@@ -101,7 +117,7 @@ static void USBC_EnableDpDmPullUp(__iomem void *base)
u32 reg_val;
reg_val = musb_readl(base, USBC_REG_o_ISCR);
- reg_val |= (1 << USBC_BP_ISCR_DPDM_PULLUP_EN);
+ reg_val |= BIT(USBC_BP_ISCR_DPDM_PULLUP_EN);
reg_val = USBC_WakeUp_ClearChangeDetect(reg_val);
musb_writel(base, USBC_REG_o_ISCR, reg_val);
}
@@ -157,7 +173,7 @@ static void USBC_ConfigFIFO_Base(void)
/* config usb fifo, 8kb mode */
reg_value = readl(SUNXI_SRAMC_BASE + 0x04);
reg_value &= ~(0x03 << 0);
- reg_value |= (1 << 0);
+ reg_value |= BIT(0);
writel(reg_value, SUNXI_SRAMC_BASE + 0x04);
}
@@ -204,6 +220,7 @@ static bool enabled = false;
static int sunxi_musb_enable(struct musb *musb)
{
+ struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
int ret;
pr_debug("%s():\n", __func__);
@@ -218,17 +235,23 @@ static int sunxi_musb_enable(struct musb *musb)
musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
if (is_host_enabled(musb)) {
- ret = sunxi_usb_phy_vbus_detect(0);
+ ret = sun4i_usb_phy_vbus_detect(glue->phy);
if (ret == 1) {
printf("A charger is plugged into the OTG: ");
return -ENODEV;
}
- ret = sunxi_usb_phy_id_detect(0);
+
+ ret = sun4i_usb_phy_id_detect(glue->phy);
if (ret == 1) {
printf("No host cable detected: ");
return -ENODEV;
}
- sunxi_usb_phy_power_on(0); /* port power on */
+
+ ret = generic_phy_power_on(glue->phy);
+ if (ret) {
+ pr_err("failed to power on USB PHY\n");
+ return ret;
+ }
}
USBC_ForceVbusValidToHigh(musb->mregs);
@@ -239,13 +262,21 @@ static int sunxi_musb_enable(struct musb *musb)
static void sunxi_musb_disable(struct musb *musb)
{
+ struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
+ int ret;
+
pr_debug("%s():\n", __func__);
if (!enabled)
return;
- if (is_host_enabled(musb))
- sunxi_usb_phy_power_off(0); /* port power off */
+ if (is_host_enabled(musb)) {
+ ret = generic_phy_power_off(glue->phy);
+ if (ret) {
+ pr_err("failed to power off USB PHY\n");
+ return;
+ }
+ }
USBC_ForceVbusValidToLow(musb->mregs);
mdelay(200); /* Wait for the current session to timeout */
@@ -255,17 +286,29 @@ static void sunxi_musb_disable(struct musb *musb)
static int sunxi_musb_init(struct musb *musb)
{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
+ int ret;
pr_debug("%s():\n", __func__);
+ ret = generic_phy_init(glue->phy);
+ if (ret) {
+ pr_err("failed to init USB PHY\n");
+ return ret;
+ }
+
musb->isr = sunxi_musb_interrupt;
- setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
+ setbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
+ if (glue->cfg->clkgate_bit)
+ setbits_le32(&glue->ccm->ahb_gate0,
+ BIT(glue->cfg->clkgate_bit));
#ifdef CONFIG_SUNXI_GEN_SUN6I
- setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
+ setbits_le32(&glue->ccm->ahb_reset0_cfg, BIT(AHB_GATE_OFFSET_USB0));
+ if (glue->cfg->rst_bit)
+ setbits_le32(&glue->ccm->ahb_reset0_cfg,
+ BIT(glue->cfg->rst_bit));
#endif
- sunxi_usb_phy_init(0);
USBC_ConfigFIFO_Base();
USBC_EnableDpDmPullUp(musb->mregs);
@@ -283,44 +326,116 @@ static int sunxi_musb_init(struct musb *musb)
return 0;
}
+static void sunxi_musb_pre_root_reset_end(struct musb *musb)
+{
+ struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
+
+ sun4i_usb_phy_set_squelch_detect(glue->phy, false);
+}
+
+static void sunxi_musb_post_root_reset_end(struct musb *musb)
+{
+ struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
+
+ sun4i_usb_phy_set_squelch_detect(glue->phy, true);
+}
+
static const struct musb_platform_ops sunxi_musb_ops = {
.init = sunxi_musb_init,
.enable = sunxi_musb_enable,
.disable = sunxi_musb_disable,
+ .pre_root_reset_end = sunxi_musb_pre_root_reset_end,
+ .post_root_reset_end = sunxi_musb_post_root_reset_end,
+};
+
+/* Allwinner OTG supports up to 5 endpoints */
+#define SUNXI_MUSB_MAX_EP_NUM 6
+#define SUNXI_MUSB_RAM_BITS 11
+
+static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = {
+ MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512),
+};
+
+/* H3/V3s OTG supports only 4 endpoints */
+#define SUNXI_MUSB_MAX_EP_NUM_H3 5
+
+static struct musb_fifo_cfg sunxi_musb_mode_cfg_h3[] = {
+ MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512),
+ MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512),
+ MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512),
};
static struct musb_hdrc_config musb_config = {
- .multipoint = 1,
- .dyn_fifo = 1,
- .num_eps = 6,
- .ram_bits = 11,
+ .fifo_cfg = sunxi_musb_mode_cfg,
+ .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg),
+ .multipoint = true,
+ .dyn_fifo = true,
+ .num_eps = SUNXI_MUSB_MAX_EP_NUM,
+ .ram_bits = SUNXI_MUSB_RAM_BITS,
};
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_HOST)
- .mode = MUSB_HOST,
-#else
- .mode = MUSB_PERIPHERAL,
-#endif
- .config = &musb_config,
- .power = 250,
- .platform_ops = &sunxi_musb_ops,
+static struct musb_hdrc_config musb_config_h3 = {
+ .fifo_cfg = sunxi_musb_mode_cfg_h3,
+ .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_h3),
+ .multipoint = true,
+ .dyn_fifo = true,
+ .soft_con = true,
+ .num_eps = SUNXI_MUSB_MAX_EP_NUM_H3,
+ .ram_bits = SUNXI_MUSB_RAM_BITS,
};
static int musb_usb_probe(struct udevice *dev)
{
- struct musb_host_data *host = dev_get_priv(dev);
+ struct sunxi_glue *glue = dev_get_priv(dev);
+ struct musb_host_data *host = &glue->mdata;
struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
+ struct musb_hdrc_platform_data pdata;
void *base = dev_read_addr_ptr(dev);
+ struct phy phy;
int ret;
if (!base)
return -EINVAL;
+ glue->cfg = (struct sunxi_musb_config *)dev_get_driver_data(dev);
+ if (!glue->cfg)
+ return -EINVAL;
+
+ glue->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ if (IS_ERR(glue->ccm))
+ return PTR_ERR(glue->ccm);
+
+ ret = generic_phy_get_by_name(dev, "usb", &phy);
+ if (ret) {
+ pr_err("failed to get usb PHY\n");
+ return ret;
+ }
+
+ glue->phy = &phy;
priv->desc_before_addr = true;
+ memset(&pdata, 0, sizeof(pdata));
+ pdata.power = 250;
+ pdata.platform_ops = &sunxi_musb_ops;
+ pdata.config = glue->cfg->config;
+
#ifdef CONFIG_USB_MUSB_HOST
- host->host = musb_init_controller(&musb_plat, NULL, base);
+ pdata.mode = MUSB_HOST;
+ host->host = musb_init_controller(&pdata, &glue->dev, base);
if (!host->host)
return -EIO;
@@ -328,7 +443,8 @@ static int musb_usb_probe(struct udevice *dev)
if (!ret)
printf("Allwinner mUSB OTG (Host)\n");
#else
- ret = musb_register(&musb_plat, NULL, base);
+ pdata.mode = MUSB_PERIPHERAL;
+ ret = musb_register(&pdata, &glue->dev, base);
if (!ret)
printf("Allwinner mUSB OTG (Peripheral)\n");
#endif
@@ -338,16 +454,30 @@ static int musb_usb_probe(struct udevice *dev)
static int musb_usb_remove(struct udevice *dev)
{
- struct musb_host_data *host = dev_get_priv(dev);
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ struct sunxi_glue *glue = dev_get_priv(dev);
+ struct musb_host_data *host = &glue->mdata;
+ int ret;
+
+ if (generic_phy_valid(glue->phy)) {
+ ret = generic_phy_exit(glue->phy);
+ if (ret) {
+ pr_err("failed to exit %s USB PHY\n", dev->name);
+ return ret;
+ }
+ }
musb_stop(host->host);
- sunxi_usb_phy_exit(0);
#ifdef CONFIG_SUNXI_GEN_SUN6I
- clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_GATE_OFFSET_USB0);
+ clrbits_le32(&glue->ccm->ahb_reset0_cfg, BIT(AHB_GATE_OFFSET_USB0));
+ if (glue->cfg->rst_bit)
+ clrbits_le32(&glue->ccm->ahb_reset0_cfg,
+ BIT(glue->cfg->rst_bit));
#endif
- clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
+ clrbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
+ if (glue->cfg->clkgate_bit)
+ clrbits_le32(&glue->ccm->ahb_gate0,
+ BIT(glue->cfg->clkgate_bit));
free(host->host);
host->host = NULL;
@@ -355,11 +485,25 @@ static int musb_usb_remove(struct udevice *dev)
return 0;
}
+static const struct sunxi_musb_config sun4i_a10_cfg = {
+ .config = &musb_config,
+};
+
+static const struct sunxi_musb_config sun8i_h3_cfg = {
+ .config = &musb_config_h3,
+ .rst_bit = 23,
+ .clkgate_bit = 23,
+};
+
static const struct udevice_id sunxi_musb_ids[] = {
- { .compatible = "allwinner,sun4i-a10-musb" },
- { .compatible = "allwinner,sun6i-a31-musb" },
- { .compatible = "allwinner,sun8i-a33-musb" },
- { .compatible = "allwinner,sun8i-h3-musb" },
+ { .compatible = "allwinner,sun4i-a10-musb",
+ .data = (ulong)&sun4i_a10_cfg },
+ { .compatible = "allwinner,sun6i-a31-musb",
+ .data = (ulong)&sun4i_a10_cfg },
+ { .compatible = "allwinner,sun8i-a33-musb",
+ .data = (ulong)&sun4i_a10_cfg },
+ { .compatible = "allwinner,sun8i-h3-musb",
+ .data = (ulong)&sun8i_h3_cfg },
{ }
};
@@ -377,5 +521,5 @@ U_BOOT_DRIVER(usb_musb) = {
.ops = &musb_usb_ops,
#endif
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
- .priv_auto_alloc_size = sizeof(struct musb_host_data),
+ .priv_auto_alloc_size = sizeof(struct sunxi_glue),
};
diff --git a/include/phy-sun4i-usb.h b/include/phy-sun4i-usb.h
new file mode 100644
index 0000000000..b0a45b2058
--- /dev/null
+++ b/include/phy-sun4i-usb.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GENERIC_PHY_SUN4I_USB_H
+#define __GENERIC_PHY_SUN4I_USB_H
+
+/**
+ * sun4i_usb_phy_id_detect - detect ID pin of USB PHY
+ *
+ * @phy: USB PHY port to detect ID pin
+ * @return 0 if OK, or a negative error code
+ */
+int sun4i_usb_phy_id_detect(struct phy *phy);
+
+/**
+ * sun4i_usb_phy_vbus_detect - detect VBUS pin of USB PHY
+ *
+ * @phy: USB PHY port to detect VBUS pin
+ * @return 0 if OK, or a negative error code
+ */
+int sun4i_usb_phy_vbus_detect(struct phy *phy);
+
+/**
+ * sun4i_usb_phy_set_squelch_detect() - Enable/disable squelch detect
+ *
+ * @phy: reference to a sun4i usb phy
+ * @enabled: wether to enable or disable squelch detect
+ */
+void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled);
+
+#endif /*__GENERIC_PHY_SUN4I_USB_H */