summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/ronetix/pm9261/Makefile2
-rw-r--r--board/ronetix/pm9261/pm9261.c19
-rw-r--r--configs/pm9261_defconfig19
-rw-r--r--include/configs/pm9261.h33
4 files changed, 28 insertions, 45 deletions
diff --git a/board/ronetix/pm9261/Makefile b/board/ronetix/pm9261/Makefile
index 3860283a3b..90835d372f 100644
--- a/board/ronetix/pm9261/Makefile
+++ b/board/ronetix/pm9261/Makefile
@@ -11,5 +11,5 @@
#
obj-y += pm9261.o
-obj-y += led.o
+obj-$(CONFIG_RED_LED) += led.o
obj-$(CONFIG_HAS_DATAFLASH) += partition.o
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index 160f8f86d1..f338ff8f47 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -21,7 +21,6 @@
#include <lcd.h>
#include <atmel_lcdc.h>
-#include <dataflash.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
#include <net.h>
#endif
@@ -178,7 +177,7 @@ extern flash_info_t flash_info[];
void lcd_show_board_info(void)
{
- ulong dram_size, nand_size, flash_size, dataflash_size;
+ ulong dram_size, nand_size, flash_size;
int i;
char temp[32];
@@ -201,17 +200,11 @@ void lcd_show_board_info(void)
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
flash_size += flash_info[i].size;
- dataflash_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++)
- dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number *
- dataflash_info[i].Device.pages_size;
-
lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n"
"%ld MB DataFlash\n",
dram_size >> 20,
nand_size >> 20,
- flash_size >> 20,
- dataflash_size >> 20);
+ flash_size >> 20);
}
#endif /* CONFIG_LCD_INFO */
@@ -219,11 +212,6 @@ void lcd_show_board_info(void)
int board_early_init_f(void)
{
- at91_periph_clk_enable(ATMEL_ID_PIOA);
- at91_periph_clk_enable(ATMEL_ID_PIOC);
-
- at91_seriald_hw_init();
-
return 0;
}
@@ -238,9 +226,6 @@ int board_init(void)
#ifdef CONFIG_CMD_NAND
pm9261_nand_hw_init();
#endif
-#ifdef CONFIG_HAS_DATAFLASH
- at91_spi0_hw_init(1 << 0);
-#endif
#ifdef CONFIG_DRIVER_DM9000
pm9261_dm9000_hw_init();
#endif
diff --git a/configs/pm9261_defconfig b/configs/pm9261_defconfig
index 19226733bb..a2cbb4c4e0 100644
--- a/configs/pm9261_defconfig
+++ b/configs/pm9261_defconfig
@@ -1,6 +1,8 @@
CONFIG_ARM=y
CONFIG_ARCH_AT91=y
CONFIG_TARGET_PM9261=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261"
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_BOOTDELAY=3
@@ -14,14 +16,31 @@ CONFIG_SYS_PROMPT="pm9261> "
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
+CONFIG_DM_SPI=y
+CONFIG_ATMEL_SPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_LCD=y
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index b9c93b0f21..c4d3d96486 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -141,10 +141,6 @@
/*
* Hardware drivers
*/
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#define CONFIG_USART_BASE ATMEL_BASE_DBGU
-#define CONFIG_USART_ID ATMEL_ID_SYS
/* LCD */
#define LCD_BPP LCD_COLOR8
@@ -155,13 +151,6 @@
#define CONFIG_ATMEL_LCD 1
#define CONFIG_ATMEL_LCD_BGR555 1
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED GPIO_PIN_PC(12)
-#define CONFIG_GREEN_LED GPIO_PIN_PC(13)
-#define CONFIG_YELLOW_LED GPIO_PIN_PC(15)
-
-
/*
* BOOTP options
*/
@@ -175,16 +164,6 @@
#define PHYS_SDRAM 0x20000000
#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
/* NAND flash */
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
@@ -235,13 +214,13 @@
#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_SYS_MONITOR_BASE \
- (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR \
- (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_ENV_SECT_SIZE 0x210
+#define CONFIG_ENV_SPI_MAX_HZ 15000000
+#define CONFIG_BOOTCOMMAND "sf probe 0; " \
+ "sf read 0x22000000 0x84000 0x210000; " \
+ "bootm 0x22000000"
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
"root=/dev/mtdblock0 " \
"mtdparts=atmel_nand:-(root) " \
@@ -324,7 +303,7 @@
ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
GENERATED_GBL_DATA_SIZE)
#endif