diff options
| -rw-r--r-- | arch/arm/mach-imx/mx6/Kconfig | 2 | ||||
| -rw-r--r-- | board/aristainetos/aristainetos.c | 60 | ||||
| -rw-r--r-- | configs/aristainetos2_defconfig | 3 |
3 files changed, 4 insertions, 61 deletions
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index c78e91968b..6bc7405a1c 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -132,7 +132,9 @@ config TARGET_ARISTAINETOS2 select SYS_I2C_MXC select MXC_UART select FEC_MXC + select DM imply CMD_SATA + imply CMD_DM config TARGET_CGTQMX6EVAL bool "cgtqmx6eval" diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c index b296ea2522..00ffac8eb6 100644 --- a/board/aristainetos/aristainetos.c +++ b/board/aristainetos/aristainetos.c @@ -43,10 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ PAD_CTL_SRE_FAST | PAD_CTL_HYS) @@ -117,30 +113,6 @@ struct i2c_pads_info i2c_pad_info4 = { } }; -iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D19__UART1_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D20__UART1_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -iomux_v3_cfg_t const uart2_pads[] = { - MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -iomux_v3_cfg_t const uart3_pads[] = { - MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D31__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_EIM_D23__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -iomux_v3_cfg_t const uart4_pads[] = { - MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - iomux_v3_cfg_t const gpio_pads[] = { /* LED enable*/ MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL), @@ -312,28 +284,6 @@ static void setup_spi(void) #endif } -static void setup_iomux_uart(void) -{ - switch (CONFIG_MXC_UART_BASE) { - case UART1_BASE: - imx_iomux_v3_setup_multiple_pads(uart1_pads, - ARRAY_SIZE(uart1_pads)); - break; - case UART2_BASE: - imx_iomux_v3_setup_multiple_pads(uart2_pads, - ARRAY_SIZE(uart2_pads)); - break; - case UART3_BASE: - imx_iomux_v3_setup_multiple_pads(uart3_pads, - ARRAY_SIZE(uart3_pads)); - break; - case UART4_BASE: - imx_iomux_v3_setup_multiple_pads(uart4_pads, - ARRAY_SIZE(uart4_pads)); - break; - } -} - int board_phy_config(struct phy_device *phydev) { /* control data pad skew - devaddr = 0x02, register = 0x04 */ @@ -629,7 +579,6 @@ static void set_gpr_register(void) extern char __bss_start[], __bss_end[]; int board_early_init_f(void) { - setup_iomux_uart(); setup_iomux_gpio(); gpio_direction_output(SOFT_RESET_GPIO, 1); @@ -808,15 +757,6 @@ int board_mmc_init(bd_t *bis) } #endif -/* - * Do not overwrite the console - * Use always serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} - struct display_info_t const displays[] = { { .bus = -1, diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig index 564c8c46d7..65702c0905 100644 --- a/configs/aristainetos2_defconfig +++ b/configs/aristainetos2_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_MX6=y CONFIG_SYS_TEXT_BASE=0x17800000 +CONFIG_SYS_MALLOC_F_LEN=0xe000 CONFIG_TARGET_ARISTAINETOS2=y CONFIG_ENV_SIZE=0x3000 CONFIG_ENV_OFFSET=0xD0000 @@ -12,7 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aristainetos/aristainetos2.cfg" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOUNCE_BUFFER=y CONFIG_BOARD_TYPES=y @@ -70,6 +70,7 @@ CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_MII=y CONFIG_PWM_IMX=y +CONFIG_DM_SERIAL=y CONFIG_SPI=y CONFIG_MXC_SPI=y CONFIG_USB=y |