summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README5
-rw-r--r--configs/MPC8315ERDB_defconfig1
-rw-r--r--configs/TQM834x_defconfig1
-rw-r--r--configs/integratorap_cm720t_defconfig1
-rw-r--r--configs/integratorap_cm920t_defconfig1
-rw-r--r--configs/integratorap_cm926ejs_defconfig1
-rw-r--r--configs/integratorap_cm946es_defconfig1
-rw-r--r--configs/malta64_defconfig1
-rw-r--r--configs/malta64el_defconfig1
-rw-r--r--configs/malta_defconfig1
-rw-r--r--configs/maltael_defconfig1
-rw-r--r--drivers/net/Kconfig12
-rw-r--r--drivers/net/eepro100.c1271
-rw-r--r--drivers/net/pcnet.c618
-rw-r--r--include/configs/MPC8315ERDB.h1
-rw-r--r--include/configs/MPC8323ERDB.h1
-rw-r--r--include/configs/MPC832XEMDS.h1
-rw-r--r--include/configs/MPC8349EMDS.h1
-rw-r--r--include/configs/MPC8349EMDS_SDRAM.h1
-rw-r--r--include/configs/MPC837XEMDS.h1
-rw-r--r--include/configs/MPC8540ADS.h1
-rw-r--r--include/configs/MPC8541CDS.h1
-rw-r--r--include/configs/MPC8544DS.h1
-rw-r--r--include/configs/MPC8548CDS.h1
-rw-r--r--include/configs/MPC8555CDS.h1
-rw-r--r--include/configs/MPC8560ADS.h1
-rw-r--r--include/configs/MPC8568MDS.h1
-rw-r--r--include/configs/MPC8569MDS.h1
-rw-r--r--include/configs/MPC8572DS.h1
-rw-r--r--include/configs/MPC8641HPCN.h1
-rw-r--r--include/configs/TQM834x.h2
-rw-r--r--include/configs/caddy2.h1
-rw-r--r--include/configs/integratorap.h1
-rw-r--r--include/configs/malta.h2
-rw-r--r--include/configs/sbc8349.h1
-rw-r--r--include/configs/sbc8548.h1
-rw-r--r--include/configs/sbc8641d.h1
-rw-r--r--include/configs/vme8349.h1
-rw-r--r--scripts/config_whitelist.txt2
39 files changed, 1075 insertions, 869 deletions
diff --git a/README b/README
index bcf1983631..4367ac3798 100644
--- a/README
+++ b/README
@@ -889,11 +889,6 @@ The following options need to be configured:
Allow generic access to the SPI bus on the Intel 8257x, for
example with the "sspi" command.
- CONFIG_EEPRO100
- Support for Intel 82557/82559/82559ER chips.
- Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM
- write routine for first time initialisation.
-
CONFIG_TULIP
Support for Digital 2114x chips.
diff --git a/configs/MPC8315ERDB_defconfig b/configs/MPC8315ERDB_defconfig
index bbb79dff2e..d7981e9855 100644
--- a/configs/MPC8315ERDB_defconfig
+++ b/configs/MPC8315ERDB_defconfig
@@ -147,6 +147,7 @@ CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_SMSC=y
CONFIG_PHY_VITESSE=y
+CONFIG_EEPRO100=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
diff --git a/configs/TQM834x_defconfig b/configs/TQM834x_defconfig
index 96ce4de0e6..c29d8a8be1 100644
--- a/configs/TQM834x_defconfig
+++ b/configs/TQM834x_defconfig
@@ -159,6 +159,7 @@ CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_SMSC=y
CONFIG_PHY_VITESSE=y
+CONFIG_EEPRO100=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
diff --git a/configs/integratorap_cm720t_defconfig b/configs/integratorap_cm720t_defconfig
index f5f9cb28b3..1b7d672bcb 100644
--- a/configs/integratorap_cm720t_defconfig
+++ b/configs/integratorap_cm720t_defconfig
@@ -24,6 +24,7 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_EEPRO100=y
CONFIG_PCI=y
CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
diff --git a/configs/integratorap_cm920t_defconfig b/configs/integratorap_cm920t_defconfig
index 8a0ad1f948..116ac015a0 100644
--- a/configs/integratorap_cm920t_defconfig
+++ b/configs/integratorap_cm920t_defconfig
@@ -24,6 +24,7 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_EEPRO100=y
CONFIG_PCI=y
CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
diff --git a/configs/integratorap_cm926ejs_defconfig b/configs/integratorap_cm926ejs_defconfig
index ab61bf2ef4..9c1a3fa2f5 100644
--- a/configs/integratorap_cm926ejs_defconfig
+++ b/configs/integratorap_cm926ejs_defconfig
@@ -24,6 +24,7 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_EEPRO100=y
CONFIG_PCI=y
CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
diff --git a/configs/integratorap_cm946es_defconfig b/configs/integratorap_cm946es_defconfig
index 7af5433161..ee9c69bce0 100644
--- a/configs/integratorap_cm946es_defconfig
+++ b/configs/integratorap_cm946es_defconfig
@@ -24,6 +24,7 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_EEPRO100=y
CONFIG_PCI=y
CONFIG_BAUDRATE=38400
CONFIG_OF_LIBFDT=y
diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig
index e5a19a6e54..a16abc7fa9 100644
--- a/configs/malta64_defconfig
+++ b/configs/malta64_defconfig
@@ -27,6 +27,7 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_PCNET=y
CONFIG_PCI=y
CONFIG_RTC_MC146818=y
CONFIG_SYS_NS16550=y
diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig
index e9de5bea6e..a9efe7736e 100644
--- a/configs/malta64el_defconfig
+++ b/configs/malta64el_defconfig
@@ -28,6 +28,7 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_PCNET=y
CONFIG_PCI=y
CONFIG_RTC_MC146818=y
CONFIG_SYS_NS16550=y
diff --git a/configs/malta_defconfig b/configs/malta_defconfig
index 2b43818c81..0680f595db 100644
--- a/configs/malta_defconfig
+++ b/configs/malta_defconfig
@@ -26,6 +26,7 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_PCNET=y
CONFIG_PCI=y
CONFIG_RTC_MC146818=y
CONFIG_SYS_NS16550=y
diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig
index ec984b5a35..31c9ff6a77 100644
--- a/configs/maltael_defconfig
+++ b/configs/maltael_defconfig
@@ -27,6 +27,7 @@ CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_CFI=y
+CONFIG_PCNET=y
CONFIG_PCI=y
CONFIG_RTC_MC146818=y
CONFIG_SYS_NS16550=y
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index bb23f73fc2..1566b3bda1 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -193,6 +193,12 @@ config CMD_E1000
used on devices with SPI support you can reprogram the EEPROM from
U-Boot.
+config EEPRO100
+ bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
+ help
+ This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
+ ethernet family of adapters.
+
config ETH_SANDBOX
depends on DM_ETH && SANDBOX
default y
@@ -392,6 +398,12 @@ config MII
help
Enable support of the Media-Independent Interface (MII)
+config PCNET
+ bool "AMD PCnet series Ethernet controller driver"
+ help
+ This driver supports AMD PCnet series fast ethernet family of
+ PCI chipsets/adapters.
+
config RTL8139
bool "Realtek 8139 series Ethernet controller driver"
help
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index e186ab4e5f..45ea3b70fc 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -5,33 +5,30 @@
*/
#include <common.h>
+#include <asm/io.h>
+#include <cpu_func.h>
#include <malloc.h>
+#include <miiphy.h>
#include <net.h>
#include <netdev.h>
-#include <asm/io.h>
#include <pci.h>
-#include <miiphy.h>
#include <linux/delay.h>
-#undef DEBUG
-
- /* Ethernet chip registers.
- */
-#define SCBStatus 0 /* Rx/Command Unit Status *Word* */
-#define SCBIntAckByte 1 /* Rx/Command Unit STAT/ACK byte */
-#define SCBCmd 2 /* Rx/Command Unit Command *Word* */
-#define SCBIntrCtlByte 3 /* Rx/Command Unit Intr.Control Byte */
-#define SCBPointer 4 /* General purpose pointer. */
-#define SCBPort 8 /* Misc. commands and operands. */
-#define SCBflash 12 /* Flash memory control. */
-#define SCBeeprom 14 /* EEPROM memory control. */
-#define SCBCtrlMDI 16 /* MDI interface control. */
-#define SCBEarlyRx 20 /* Early receive byte count. */
-#define SCBGenControl 28 /* 82559 General Control Register */
-#define SCBGenStatus 29 /* 82559 General Status register */
-
- /* 82559 SCB status word defnitions
- */
+/* Ethernet chip registers. */
+#define SCB_STATUS 0 /* Rx/Command Unit Status *Word* */
+#define SCB_INT_ACK_BYTE 1 /* Rx/Command Unit STAT/ACK byte */
+#define SCB_CMD 2 /* Rx/Command Unit Command *Word* */
+#define SCB_INTR_CTL_BYTE 3 /* Rx/Command Unit Intr.Control Byte */
+#define SCB_POINTER 4 /* General purpose pointer. */
+#define SCB_PORT 8 /* Misc. commands and operands. */
+#define SCB_FLASH 12 /* Flash memory control. */
+#define SCB_EEPROM 14 /* EEPROM memory control. */
+#define SCB_CTRL_MDI 16 /* MDI interface control. */
+#define SCB_EARLY_RX 20 /* Early receive byte count. */
+#define SCB_GEN_CONTROL 28 /* 82559 General Control Register */
+#define SCB_GEN_STATUS 29 /* 82559 General Status register */
+
+/* 82559 SCB status word defnitions */
#define SCB_STATUS_CX 0x8000 /* CU finished command (transmit) */
#define SCB_STATUS_FR 0x4000 /* frame received */
#define SCB_STATUS_CNA 0x2000 /* CU left active state */
@@ -45,8 +42,7 @@
#define SCB_INTACK_TX (SCB_STATUS_CX | SCB_STATUS_CNA)
#define SCB_INTACK_RX (SCB_STATUS_FR | SCB_STATUS_RNR)
- /* System control block commands
- */
+/* System control block commands */
/* CU Commands */
#define CU_NOP 0x0000
#define CU_START 0x0010
@@ -73,24 +69,22 @@
#define CU_STATUS_MASK 0x00C0
#define RU_STATUS_MASK 0x003C
-#define RU_STATUS_IDLE (0<<2)
-#define RU_STATUS_SUS (1<<2)
-#define RU_STATUS_NORES (2<<2)
-#define RU_STATUS_READY (4<<2)
-#define RU_STATUS_NO_RBDS_SUS ((1<<2)|(8<<2))
-#define RU_STATUS_NO_RBDS_NORES ((2<<2)|(8<<2))
-#define RU_STATUS_NO_RBDS_READY ((4<<2)|(8<<2))
+#define RU_STATUS_IDLE (0 << 2)
+#define RU_STATUS_SUS (1 << 2)
+#define RU_STATUS_NORES (2 << 2)
+#define RU_STATUS_READY (4 << 2)
+#define RU_STATUS_NO_RBDS_SUS ((1 << 2) | (8 << 2))
+#define RU_STATUS_NO_RBDS_NORES ((2 << 2) | (8 << 2))
+#define RU_STATUS_NO_RBDS_READY ((4 << 2) | (8 << 2))
- /* 82559 Port interface commands.
- */
+/* 82559 Port interface commands. */
#define I82559_RESET 0x00000000 /* Software reset */
#define I82559_SELFTEST 0x00000001 /* 82559 Selftest command */
#define I82559_SELECTIVE_RESET 0x00000002
#define I82559_DUMP 0x00000003
#define I82559_DUMP_WAKEUP 0x00000007
- /* 82559 Eeprom interface.
- */
+/* 82559 Eeprom interface. */
#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */
#define EE_CS 0x02 /* EEPROM chip select. */
#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
@@ -101,23 +95,21 @@
#define EE_CMD_BITS 3
#define EE_DATA_BITS 16
- /* The EEPROM commands include the alway-set leading bit.
- */
-#define EE_EWENB_CMD (4 << addr_len)
-#define EE_WRITE_CMD (5 << addr_len)
-#define EE_READ_CMD (6 << addr_len)
-#define EE_ERASE_CMD (7 << addr_len)
-
- /* Receive frame descriptors.
- */
-struct RxFD {
- volatile u16 status;
- volatile u16 control;
- volatile u32 link; /* struct RxFD * */
- volatile u32 rx_buf_addr; /* void * */
- volatile u32 count;
-
- volatile u8 data[PKTSIZE_ALIGN];
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_EWENB_CMD(addr_len) (4 << (addr_len))
+#define EE_WRITE_CMD(addr_len) (5 << (addr_len))
+#define EE_READ_CMD(addr_len) (6 << (addr_len))
+#define EE_ERASE_CMD(addr_len) (7 << (addr_len))
+
+/* Receive frame descriptors. */
+struct eepro100_rxfd {
+ u16 status;
+ u16 control;
+ u32 link; /* struct eepro100_rxfd * */
+ u32 rx_buf_addr; /* void * */
+ u32 count;
+
+ u8 data[PKTSIZE_ALIGN];
};
#define RFD_STATUS_C 0x8000 /* completion of received frame */
@@ -143,37 +135,35 @@ struct RxFD {
#define RFD_RX_IA_MATCH 0x0002 /* individual address does not match */
#define RFD_RX_TCO 0x0001 /* TCO indication */
- /* Transmit frame descriptors
- */
-struct TxFD { /* Transmit frame descriptor set. */
- volatile u16 status;
- volatile u16 command;
- volatile u32 link; /* void * */
- volatile u32 tx_desc_addr; /* Always points to the tx_buf_addr element. */
- volatile s32 count;
-
- volatile u32 tx_buf_addr0; /* void *, frame to be transmitted. */
- volatile s32 tx_buf_size0; /* Length of Tx frame. */
- volatile u32 tx_buf_addr1; /* void *, frame to be transmitted. */
- volatile s32 tx_buf_size1; /* Length of Tx frame. */
+/* Transmit frame descriptors */
+struct eepro100_txfd { /* Transmit frame descriptor set. */
+ u16 status;
+ u16 command;
+ u32 link; /* void * */
+ u32 tx_desc_addr; /* Always points to the tx_buf_addr element. */
+ s32 count;
+
+ u32 tx_buf_addr0; /* void *, frame to be transmitted. */
+ s32 tx_buf_size0; /* Length of Tx frame. */
+ u32 tx_buf_addr1; /* void *, frame to be transmitted. */
+ s32 tx_buf_size1; /* Length of Tx frame. */
};
-#define TxCB_CMD_TRANSMIT 0x0004 /* transmit command */
-#define TxCB_CMD_SF 0x0008 /* 0=simplified, 1=flexible mode */
-#define TxCB_CMD_NC 0x0010 /* 0=CRC insert by controller */
-#define TxCB_CMD_I 0x2000 /* generate interrupt on completion */
-#define TxCB_CMD_S 0x4000 /* suspend on completion */
-#define TxCB_CMD_EL 0x8000 /* last command block in CBL */
+#define TXCB_CMD_TRANSMIT 0x0004 /* transmit command */
+#define TXCB_CMD_SF 0x0008 /* 0=simplified, 1=flexible mode */
+#define TXCB_CMD_NC 0x0010 /* 0=CRC insert by controller */
+#define TXCB_CMD_I 0x2000 /* generate interrupt on completion */
+#define TXCB_CMD_S 0x4000 /* suspend on completion */
+#define TXCB_CMD_EL 0x8000 /* last command block in CBL */
-#define TxCB_COUNT_MASK 0x3fff
-#define TxCB_COUNT_EOF 0x8000
+#define TXCB_COUNT_MASK 0x3fff
+#define TXCB_COUNT_EOF 0x8000
- /* The Speedo3 Rx and Tx frame/buffer descriptors.
- */
-struct descriptor { /* A generic descriptor. */
- volatile u16 status;
- volatile u16 command;
- volatile u32 link; /* struct descriptor * */
+/* The Speedo3 Rx and Tx frame/buffer descriptors. */
+struct descriptor { /* A generic descriptor. */
+ u16 status;
+ u16 command;
+ u32 link; /* struct descriptor * */
unsigned char params[0];
};
@@ -187,19 +177,12 @@ struct descriptor { /* A generic descriptor. */
#define CONFIG_SYS_STATUS_C 0x8000
#define CONFIG_SYS_STATUS_OK 0x2000
- /* Misc.
- */
+/* Misc. */
#define NUM_RX_DESC PKTBUFSRX
-#define NUM_TX_DESC 1 /* Number of TX descriptors */
+#define NUM_TX_DESC 1 /* Number of TX descriptors */
#define TOUT_LOOP 1000000
-static struct RxFD rx_ring[NUM_RX_DESC]; /* RX descriptor ring */
-static struct TxFD tx_ring[NUM_TX_DESC]; /* TX descriptor ring */
-static int rx_next; /* RX descriptor ring pointer */
-static int tx_next; /* TX descriptor ring pointer */
-static int tx_threshold;
-
/*
* The parameters for a CmdConfigure operation.
* There are so many options that it would be difficult to document
@@ -212,79 +195,94 @@ static const char i82558_config_cmd[] = {
0x31, 0x05,
};
-static void init_rx_ring (struct eth_device *dev);
-static void purge_tx_ring (struct eth_device *dev);
-
-static void read_hw_addr (struct eth_device *dev, bd_t * bis);
-
-static int eepro100_init (struct eth_device *dev, bd_t * bis);
-static int eepro100_send(struct eth_device *dev, void *packet, int length);
-static int eepro100_recv (struct eth_device *dev);
-static void eepro100_halt (struct eth_device *dev);
+struct eepro100_priv {
+ /* RX descriptor ring */
+ struct eepro100_rxfd rx_ring[NUM_RX_DESC];
+ /* TX descriptor ring */
+ struct eepro100_txfd tx_ring[NUM_TX_DESC];
+ /* RX descriptor ring pointer */
+ int rx_next;
+ u16 rx_stat;
+ /* TX descriptor ring pointer */
+ int tx_next;
+ int tx_threshold;
+#ifdef CONFIG_DM_ETH
+ struct udevice *devno;
+#else
+ struct eth_device dev;
+ pci_dev_t devno;
+#endif
+ char *name;
+ void __iomem *iobase;
+ u8 *enetaddr;
+};
-#if defined(CONFIG_E500)
-#define bus_to_phys(a) (a)
-#define phys_to_bus(a) (a)
+#if defined(CONFIG_DM_ETH)
+#define bus_to_phys(dev, a) dm_pci_mem_to_phys((dev), (a))
+#define phys_to_bus(dev, a) dm_pci_phys_to_mem((dev), (a))
+#elif defined(CONFIG_E500)
+#define bus_to_phys(dev, a) (a)
+#define phys_to_bus(dev, a) (a)
#else
-#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
+#define bus_to_phys(dev, a) pci_mem_to_phys((dev), (a))
+#define phys_to_bus(dev, a) pci_phys_to_mem((dev), (a))
#endif
-static inline int INW (struct eth_device *dev, u_long addr)
+static int INW(struct eepro100_priv *priv, u_long addr)
{
- return le16_to_cpu(*(volatile u16 *)(addr + (u_long)dev->iobase));
+ return le16_to_cpu(readw(addr + priv->iobase));
}
-static inline void OUTW (struct eth_device *dev, int command, u_long addr)
+static void OUTW(struct eepro100_priv *priv, int command, u_long addr)
{
- *(volatile u16 *)((addr + (u_long)dev->iobase)) = cpu_to_le16(command);
+ writew(cpu_to_le16(command), addr + priv->iobase);
}
-static inline void OUTL (struct eth_device *dev, int command, u_long addr)
+static void OUTL(struct eepro100_priv *priv, int command, u_long addr)
{
- *(volatile u32 *)((addr + (u_long)dev->iobase)) = cpu_to_le32(command);
+ writel(cpu_to_le32(command), addr + priv->iobase);
}
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static inline int INL (struct eth_device *dev, u_long addr)
+static int INL(struct eepro100_priv *priv, u_long addr)
{
- return le32_to_cpu(*(volatile u32 *)(addr + (u_long)dev->iobase));
+ return le32_to_cpu(readl(addr + priv->iobase));
}
-static int get_phyreg (struct eth_device *dev, unsigned char addr,
- unsigned char reg, unsigned short *value)
+static int get_phyreg(struct eepro100_priv *priv, unsigned char addr,
+ unsigned char reg, unsigned short *value)
{
- int cmd;
int timeout = 50;
+ int cmd;
/* read requested data */
cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
- OUTL (dev, cmd, SCBCtrlMDI);
+ OUTL(priv, cmd, SCB_CTRL_MDI);
do {
udelay(1000);
- cmd = INL (dev, SCBCtrlMDI);
+ cmd = INL(priv, SCB_CTRL_MDI);
} while (!(cmd & (1 << 28)) && (--timeout));
if (timeout == 0)
return -1;
- *value = (unsigned short) (cmd & 0xffff);
+ *value = (unsigned short)(cmd & 0xffff);
return 0;
}
-static int set_phyreg (struct eth_device *dev, unsigned char addr,
- unsigned char reg, unsigned short value)
+static int set_phyreg(struct eepro100_priv *priv, unsigned char addr,
+ unsigned char reg, unsigned short value)
{
- int cmd;
int timeout = 50;
+ int cmd;
/* write requested data */
cmd = (1 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
- OUTL (dev, cmd | value, SCBCtrlMDI);
+ OUTL(priv, cmd | value, SCB_CTRL_MDI);
- while (!(INL (dev, SCBCtrlMDI) & (1 << 28)) && (--timeout))
+ while (!(INL(priv, SCB_CTRL_MDI) & (1 << 28)) && (--timeout))
udelay(1000);
if (timeout == 0)
@@ -293,52 +291,47 @@ static int set_phyreg (struct eth_device *dev, unsigned char addr,
return 0;
}
-/* Check if given phyaddr is valid, i.e. there is a PHY connected.
+/*
+ * Check if given phyaddr is valid, i.e. there is a PHY connected.
* Do this by checking model value field from ID2 register.
*/
-static struct eth_device* verify_phyaddr (const char *devname,
- unsigned char addr)
+static int verify_phyaddr(struct eepro100_priv *priv, unsigned char addr)
{
- struct eth_device *dev;
- unsigned short value;
- unsigned char model;
-
- dev = eth_get_dev_by_name(devname);
- if (dev == NULL) {
- printf("%s: no such device\n", devname);
- return NULL;
- }
+ unsigned short value, model;
+ int ret;
/* read id2 register */
- if (get_phyreg(dev, addr, MII_PHYSID2, &value) != 0) {
- printf("%s: mii read timeout!\n", devname);
- return NULL;
+ ret = get_phyreg(priv, addr, MII_PHYSID2, &value);
+ if (ret) {
+ printf("%s: mii read timeout!\n", priv->name);
+ return ret;
}
/* get model */
- model = (unsigned char)((value >> 4) & 0x003f);
-
- if (model == 0) {
- printf("%s: no PHY at address %d\n", devname, addr);
- return NULL;
+ model = (value >> 4) & 0x003f;
+ if (!model) {
+ printf("%s: no PHY at address %d\n", priv->name, addr);
+ return -EINVAL;
}
- return dev;
+ return 0;
}
static int eepro100_miiphy_read(struct mii_dev *bus, int addr, int devad,
int reg)
{
+ struct eepro100_priv *priv = bus->priv;
unsigned short value = 0;
- struct eth_device *dev;
+ int ret;
- dev = verify_phyaddr(bus->name, addr);
- if (dev == NULL)
- return -1;
+ ret = verify_phyaddr(priv, addr);
+ if (ret)
+ return ret;
- if (get_phyreg(dev, addr, reg, &value) != 0) {
+ ret = get_phyreg(priv, addr, reg, &value);
+ if (ret) {
printf("%s: mii read timeout!\n", bus->name);
- return -1;
+ return ret;
}
return value;
@@ -347,588 +340,678 @@ static int eepro100_miiphy_read(struct mii_dev *bus, int addr, int devad,
static int eepro100_miiphy_write(struct mii_dev *bus, int addr, int devad,
int reg, u16 value)
{
- struct eth_device *dev;
+ struct eepro100_priv *priv = bus->priv;
+ int ret;
- dev = verify_phyaddr(bus->name, addr);
- if (dev == NULL)
- return -1;
+ ret = verify_phyaddr(priv, addr);
+ if (ret)
+ return ret;
- if (set_phyreg(dev, addr, reg, value) != 0) {
+ ret = set_phyreg(priv, addr, reg, value);
+ if (ret) {
printf("%s: mii write timeout!\n", bus->name);
- return -1;
+ return ret;
}
return 0;
}
-
#endif
-/* Wait for the chip get the command.
-*/
-static int wait_for_eepro100 (struct eth_device *dev)
+static void init_rx_ring(struct eepro100_priv *priv)
{
+ struct eepro100_rxfd *rx_ring = priv->rx_ring;
int i;
- for (i = 0; INW (dev, SCBCmd) & (CU_CMD_MASK | RU_CMD_MASK); i++) {
- if (i >= TOUT_LOOP) {
- return 0;
- }
+ for (i = 0; i < NUM_RX_DESC; i++) {
+ rx_ring[i].status = 0;
+ rx_ring[i].control = (i == NUM_RX_DESC - 1) ?
+ cpu_to_le16 (RFD_CONTROL_S) : 0;
+ rx_ring[i].link =
+ cpu_to_le32(phys_to_bus(priv->devno,
+ (u32)&rx_ring[(i + 1) %
+ NUM_RX_DESC]));
+ rx_ring[i].rx_buf_addr = 0xffffffff;
+ rx_ring[i].count = cpu_to_le32(PKTSIZE_ALIGN << 16);
}
- return 1;
+ flush_dcache_range((unsigned long)rx_ring,
+ (unsigned long)rx_ring +
+ (sizeof(*rx_ring) * NUM_RX_DESC));
+
+ priv->rx_next = 0;
}
-static struct pci_device_id supported[] = {
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82557},
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559},
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559ER},
- {}
-};
+static void purge_tx_ring(struct eepro100_priv *priv)
+{
+ struct eepro100_txfd *tx_ring = priv->tx_ring;
+
+ priv->tx_next = 0;
+ priv->tx_threshold = 0x01208000;
+ memset(tx_ring, 0, sizeof(*tx_ring) * NUM_TX_DESC);
-int eepro100_initialize (bd_t * bis)
+ flush_dcache_range((unsigned long)tx_ring,
+ (unsigned long)tx_ring +
+ (sizeof(*tx_ring) * NUM_TX_DESC));
+}
+
+/* Wait for the chip get the command. */
+static int wait_for_eepro100(struct eepro100_priv *priv)
{
- pci_dev_t devno;
- int card_number = 0;
- struct eth_device *dev;
- u32 iobase, status;
- int idx = 0;
+ int i;
- while (1) {
- /* Find PCI device
- */
- if ((devno = pci_find_devices (supported, idx++)) < 0) {
- break;
- }
+ for (i = 0; INW(priv, SCB_CMD) & (CU_CMD_MASK | RU_CMD_MASK); i++) {
+ if (i >= TOUT_LOOP)
+ return 0;
+ }
- pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &iobase);
- iobase &= ~0xf;
+ return 1;
+}
-#ifdef DEBUG
- printf ("eepro100: Intel i82559 PCI EtherExpressPro @0x%x\n",
- iobase);
-#endif
+static int eepro100_txcmd_send(struct eepro100_priv *priv,
+ struct eepro100_txfd *desc)
+{
+ u16 rstat;
+ int i = 0;
- pci_write_config_dword (devno,
- PCI_COMMAND,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ flush_dcache_range((unsigned long)desc,
+ (unsigned long)desc + sizeof(*desc));
- /* Check if I/O accesses and Bus Mastering are enabled.
- */
- pci_read_config_dword (devno, PCI_COMMAND, &status);
- if (!(status & PCI_COMMAND_MEMORY)) {
- printf ("Error: Can not enable MEM access.\n");
- continue;
- }
+ if (!wait_for_eepro100(priv))
+ return -ETIMEDOUT;
- if (!(status & PCI_COMMAND_MASTER)) {
- printf ("Error: Can not enable Bus Mastering.\n");
- continue;
- }
+ OUTL(priv, phys_to_bus(priv->devno, (u32)desc), SCB_POINTER);
+ OUTW(priv, SCB_M | CU_START, SCB_CMD);
- dev = (struct eth_device *) malloc (sizeof *dev);
- if (!dev) {
- printf("eepro100: Can not allocate memory\n");
+ while (true) {
+ invalidate_dcache_range((unsigned long)desc,
+ (unsigned long)desc + sizeof(*desc));
+ rstat = le16_to_cpu(desc->status);
+ if (rstat & CONFIG_SYS_STATUS_C)
break;
+
+ if (i++ >= TOUT_LOOP) {
+ printf("%s: Tx error buffer not ready\n", priv->name);
+ return -EINVAL;
}
- memset(dev, 0, sizeof(*dev));
+ }
- sprintf (dev->name, "i82559#%d", card_number);
- dev->priv = (void *) devno; /* this have to come before bus_to_phys() */
- dev->iobase = bus_to_phys (iobase);
- dev->init = eepro100_init;
- dev->halt = eepro100_halt;
- dev->send = eepro100_send;
- dev->recv = eepro100_recv;
+ invalidate_dcache_range((unsigned long)desc,
+ (unsigned long)desc + sizeof(*desc));
+ rstat = le16_to_cpu(desc->status);
- eth_register (dev);
-
-#if defined (CONFIG_MII) || defined(CONFIG_CMD_MII)
- /* register mii command access routines */
- int retval;
- struct mii_dev *mdiodev = mdio_alloc();
- if (!mdiodev)
- return -ENOMEM;
- strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
- mdiodev->read = eepro100_miiphy_read;
- mdiodev->write = eepro100_miiphy_write;
-
- retval = mdio_register(mdiodev);
- if (retval < 0)
- return retval;
-#endif
+ if (!(rstat & CONFIG_SYS_STATUS_OK)) {
+ printf("TX error status = 0x%08X\n", rstat);
+ return -EIO;
+ }
- card_number++;
+ return 0;
+}
- /* Set the latency timer for value.
- */
- pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20);
+/* SROM Read. */
+static int read_eeprom(struct eepro100_priv *priv, int location, int addr_len)
+{
+ unsigned short retval = 0;
+ int read_cmd = location | EE_READ_CMD(addr_len);
+ int i;
- udelay(10 * 1000);
+ OUTW(priv, EE_ENB & ~EE_CS, SCB_EEPROM);
+ OUTW(priv, EE_ENB, SCB_EEPROM);
+
+ /* Shift the read command bits out. */
+ for (i = 12; i >= 0; i--) {
+ short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
- read_hw_addr (dev, bis);
+ OUTW(priv, EE_ENB | dataval, SCB_EEPROM);
+ udelay(1);
+ OUTW(priv, EE_ENB | dataval | EE_SHIFT_CLK, SCB_EEPROM);
+ udelay(1);
}
+ OUTW(priv, EE_ENB, SCB_EEPROM);
- return card_number;
+ for (i = 15; i >= 0; i--) {
+ OUTW(priv, EE_ENB | EE_SHIFT_CLK, SCB_EEPROM);
+ udelay(1);
+ retval = (retval << 1) |
+ !!(INW(priv, SCB_EEPROM) & EE_DATA_READ);
+ OUTW(priv, EE_ENB, SCB_EEPROM);
+ udelay(1);
+ }
+
+ /* Terminate the EEPROM access. */
+ OUTW(priv, EE_ENB & ~EE_CS, SCB_EEPROM);
+ return retval;
}
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+static int eepro100_initialize_mii(struct eepro100_priv *priv)
+{
+ /* register mii command access routines */
+ struct mii_dev *mdiodev;
+ int ret;
+
+ mdiodev = mdio_alloc();
+ if (!mdiodev)
+ return -ENOMEM;
+
+ strncpy(mdiodev->name, priv->name, MDIO_NAME_LEN);
+ mdiodev->read = eepro100_miiphy_read;
+ mdiodev->write = eepro100_miiphy_write;
+ mdiodev->priv = priv;
+
+ ret = mdio_register(mdiodev);
+ if (ret < 0) {
+ mdio_free(mdiodev);
+ return ret;
+ }
-static int eepro100_init (struct eth_device *dev, bd_t * bis)
+ return 0;
+}
+#else
+static int eepro100_initialize_mii(struct eepro100_priv *priv)
{
- int i, status = -1;
- int tx_cur;
- struct descriptor *ias_cmd, *cfg_cmd;
+ return 0;
+}
+#endif
- /* Reset the ethernet controller
- */
- OUTL (dev, I82559_SELECTIVE_RESET, SCBPort);
- udelay(20);
+static struct pci_device_id supported[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82557) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82559ER) },
+ { }
+};
- OUTL (dev, I82559_RESET, SCBPort);
- udelay(20);
+static void eepro100_get_hwaddr(struct eepro100_priv *priv)
+{
+ u16 sum = 0;
+ int i, j;
+ int addr_len = read_eeprom(priv, 0, 6) == 0xffff ? 8 : 6;
- if (!wait_for_eepro100 (dev)) {
- printf ("Error: Can not reset ethernet controller.\n");
- goto Done;
- }
- OUTL (dev, 0, SCBPointer);
- OUTW (dev, SCB_M | RUC_ADDR_LOAD, SCBCmd);
+ for (j = 0, i = 0; i < 0x40; i++) {
+ u16 value = read_eeprom(priv, i, addr_len);
- if (!wait_for_eepro100 (dev)) {
- printf ("Error: Can not reset ethernet controller.\n");
- goto Done;
+ sum += value;
+ if (i < 3) {
+ priv->enetaddr[j++] = value;
+ priv->enetaddr[j++] = value >> 8;
+ }
}
- OUTL (dev, 0, SCBPointer);
- OUTW (dev, SCB_M | CU_ADDR_LOAD, SCBCmd);
-
- /* Initialize Rx and Tx rings.
- */
- init_rx_ring (dev);
- purge_tx_ring (dev);
-
- /* Tell the adapter where the RX ring is located.
- */
- if (!wait_for_eepro100 (dev)) {
- printf ("Error: Can not reset ethernet controller.\n");
- goto Done;
+
+ if (sum != 0xBABA) {
+ memset(priv->enetaddr, 0, ETH_ALEN);
+ debug("%s: Invalid EEPROM checksum %#4.4x, check settings before activating this device!\n",
+ priv->name, sum);
}
+}
- OUTL (dev, phys_to_bus ((u32) & rx_ring[rx_next]), SCBPointer);
- OUTW (dev, SCB_M | RUC_START, SCBCmd);
+static int eepro100_init_common(struct eepro100_priv *priv)
+{
+ struct eepro100_rxfd *rx_ring = priv->rx_ring;
+ struct eepro100_txfd *tx_ring = priv->tx_ring;
+ struct eepro100_txfd *ias_cmd, *cfg_cmd;
+ int ret, status = -1;
+ int tx_cur;
- /* Send the Configure frame */
- tx_cur = tx_next;
- tx_next = ((tx_next + 1) % NUM_TX_DESC);
+ /* Reset the ethernet controller */
+ OUTL(priv, I82559_SELECTIVE_RESET, SCB_PORT);
+ udelay(20);
- cfg_cmd = (struct descriptor *) &tx_ring[tx_cur];
- cfg_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_CONFIGURE));
- cfg_cmd->status = 0;
- cfg_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
+ OUTL(priv, I82559_RESET, SCB_PORT);
+ udelay(20);
- memcpy (cfg_cmd->params, i82558_config_cmd,
- sizeof (i82558_config_cmd));
+ if (!wait_for_eepro100(priv)) {
+ printf("Error: Can not reset ethernet controller.\n");
+ goto done;
+ }
+ OUTL(priv, 0, SCB_POINTER);
+ OUTW(priv, SCB_M | RUC_ADDR_LOAD, SCB_CMD);
- if (!wait_for_eepro100 (dev)) {
- printf ("Error---CONFIG_SYS_CMD_CONFIGURE: Can not reset ethernet controller.\n");
- goto Done;
+ if (!wait_for_eepro100(priv)) {
+ printf("Error: Can not reset ethernet controller.\n");
+ goto done;
}
+ OUTL(priv, 0, SCB_POINTER);
+ OUTW(priv, SCB_M | CU_ADDR_LOAD, SCB_CMD);
- OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
- OUTW (dev, SCB_M | CU_START, SCBCmd);
+ /* Initialize Rx and Tx rings. */
+ init_rx_ring(priv);
+ purge_tx_ring(priv);
- for (i = 0;
- !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
- i++) {
- if (i >= TOUT_LOOP) {
- printf ("%s: Tx error buffer not ready\n", dev->name);
- goto Done;
- }
+ /* Tell the adapter where the RX ring is located. */
+ if (!wait_for_eepro100(priv)) {
+ printf("Error: Can not reset ethernet controller.\n");
+ goto done;
}
- if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
- printf ("TX error status = 0x%08X\n",
- le16_to_cpu (tx_ring[tx_cur].status));
- goto Done;
- }
+ /* RX ring cache was already flushed in init_rx_ring() */
+ OUTL(priv, phys_to_bus(priv->devno, (u32)&rx_ring[priv->rx_next]),
+ SCB_POINTER);
+ OUTW(priv, SCB_M | RUC_START, SCB_CMD);
- /* Send the Individual Address Setup frame
- */
- tx_cur = tx_next;
- tx_next = ((tx_next + 1) % NUM_TX_DESC);
+ /* Send the Configure frame */
+ tx_cur = priv->tx_next;
+ priv->tx_next = ((priv->tx_next + 1) % NUM_TX_DESC);
- ias_cmd = (struct descriptor *) &tx_ring[tx_cur];
- ias_cmd->command = cpu_to_le16 ((CONFIG_SYS_CMD_SUSPEND | CONFIG_SYS_CMD_IAS));
- ias_cmd->status = 0;
- ias_cmd->link = cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
+ cfg_cmd = &tx_ring[tx_cur];
+ cfg_cmd->command = cpu_to_le16(CONFIG_SYS_CMD_SUSPEND |
+ CONFIG_SYS_CMD_CONFIGURE);
+ cfg_cmd->status = 0;
+ cfg_cmd->link = cpu_to_le32(phys_to_bus(priv->devno,
+ (u32)&tx_ring[priv->tx_next]));
- memcpy (ias_cmd->params, dev->enetaddr, 6);
+ memcpy(((struct descriptor *)cfg_cmd)->params, i82558_config_cmd,
+ sizeof(i82558_config_cmd));
- /* Tell the adapter where the TX ring is located.
- */
- if (!wait_for_eepro100 (dev)) {
- printf ("Error: Can not reset ethernet controller.\n");
- goto Done;
+ ret = eepro100_txcmd_send(priv, cfg_cmd);
+ if (ret) {
+ if (ret == -ETIMEDOUT)
+ printf("Error---CONFIG_SYS_CMD_CONFIGURE: Can not reset ethernet controller.\n");
+ goto done;
}
- OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
- OUTW (dev, SCB_M | CU_START, SCBCmd);
+ /* Send the Individual Address Setup frame */
+ tx_cur = priv->tx_next;
+ priv->tx_next = ((priv->tx_next + 1) % NUM_TX_DESC);
- for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
- i++) {
- if (i >= TOUT_LOOP) {
- printf ("%s: Tx error buffer not ready\n",
- dev->name);
- goto Done;
- }
- }
+ ias_cmd = &tx_ring[tx_cur];
+ ias_cmd->command = cpu_to_le16(CONFIG_SYS_CMD_SUSPEND |
+ CONFIG_SYS_CMD_IAS);
+ ias_cmd->status = 0;
+ ias_cmd->link = cpu_to_le32(phys_to_bus(priv->devno,
+ (u32)&tx_ring[priv->tx_next]));
+
+ memcpy(((struct descriptor *)ias_cmd)->params, priv->enetaddr, 6);
- if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
- printf ("TX error status = 0x%08X\n",
- le16_to_cpu (tx_ring[tx_cur].status));
- goto Done;
+ ret = eepro100_txcmd_send(priv, ias_cmd);
+ if (ret) {
+ if (ret == -ETIMEDOUT)
+ printf("Error: Can not reset ethernet controller.\n");
+ goto done;
}
status = 0;
- Done:
+done:
return status;
}
-static int eepro100_send(struct eth_device *dev, void *packet, int length)
+static int eepro100_send_common(struct eepro100_priv *priv,
+ void *packet, int length)
{
- int i, status = -1;
+ struct eepro100_txfd *tx_ring = priv->tx_ring;
+ struct eepro100_txfd *desc;
+ int ret, status = -1;
int tx_cur;
if (length <= 0) {
- printf ("%s: bad packet size: %d\n", dev->name, length);
- goto Done;
- }
-
- tx_cur = tx_next;
- tx_next = (tx_next + 1) % NUM_TX_DESC;
-
- tx_ring[tx_cur].command = cpu_to_le16 ( TxCB_CMD_TRANSMIT |
- TxCB_CMD_SF |
- TxCB_CMD_S |
- TxCB_CMD_EL );
- tx_ring[tx_cur].status = 0;
- tx_ring[tx_cur].count = cpu_to_le32 (tx_threshold);
- tx_ring[tx_cur].link =
- cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_next]));
- tx_ring[tx_cur].tx_desc_addr =
- cpu_to_le32 (phys_to_bus ((u32) & tx_ring[tx_cur].tx_buf_addr0));
- tx_ring[tx_cur].tx_buf_addr0 =
- cpu_to_le32 (phys_to_bus ((u_long) packet));
- tx_ring[tx_cur].tx_buf_size0 = cpu_to_le32 (length);
-
- if (!wait_for_eepro100 (dev)) {
- printf ("%s: Tx error ethernet controller not ready.\n",
- dev->name);
- goto Done;
- }
-
- /* Send the packet.
- */
- OUTL (dev, phys_to_bus ((u32) & tx_ring[tx_cur]), SCBPointer);
- OUTW (dev, SCB_M | CU_START, SCBCmd);
-
- for (i = 0; !(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_C);
- i++) {
- if (i >= TOUT_LOOP) {
- printf ("%s: Tx error buffer not ready\n", dev->name);
- goto Done;
- }
+ printf("%s: bad packet size: %d\n", priv->name, length);
+ goto done;
}
- if (!(le16_to_cpu (tx_ring[tx_cur].status) & CONFIG_SYS_STATUS_OK)) {
- printf ("TX error status = 0x%08X\n",
- le16_to_cpu (tx_ring[tx_cur].status));
- goto Done;
+ tx_cur = priv->tx_next;
+ priv->tx_next = (priv->tx_next + 1) % NUM_TX_DESC;
+
+ desc = &tx_ring[tx_cur];
+ desc->command = cpu_to_le16(TXCB_CMD_TRANSMIT | TXCB_CMD_SF |
+ TXCB_CMD_S | TXCB_CMD_EL);
+ desc->status = 0;
+ desc->count = cpu_to_le32(priv->tx_threshold);
+ desc->link = cpu_to_le32(phys_to_bus(priv->devno,
+ (u32)&tx_ring[priv->tx_next]));
+ desc->tx_desc_addr = cpu_to_le32(phys_to_bus(priv->devno,
+ (u32)&desc->tx_buf_addr0));
+ desc->tx_buf_addr0 = cpu_to_le32(phys_to_bus(priv->devno,
+ (u_long)packet));
+ desc->tx_buf_size0 = cpu_to_le32(length);
+
+ ret = eepro100_txcmd_send(priv, &tx_ring[tx_cur]);
+ if (ret) {
+ if (ret == -ETIMEDOUT)
+ printf("%s: Tx error ethernet controller not ready.\n",
+ priv->name);
+ goto done;
}
status = length;
- Done:
+done:
return status;
}
-static int eepro100_recv (struct eth_device *dev)
+static int eepro100_recv_common(struct eepro100_priv *priv, uchar **packetp)
{
- u16 status, stat;
- int rx_prev, length = 0;
-
- stat = INW (dev, SCBStatus);
- OUTW (dev, stat & SCB_STATUS_RNR, SCBStatus);
+ struct eepro100_rxfd *rx_ring = priv->rx_ring;
+ struct eepro100_rxfd *desc;
+ int length;
+ u16 status;
+
+ priv->rx_stat = INW(priv, SCB_STATUS);
+ OUTW(priv, priv->rx_stat & SCB_STATUS_RNR, SCB_STATUS);
+
+ desc = &rx_ring[priv->rx_next];
+ invalidate_dcache_range((unsigned long)desc,
+ (unsigned long)desc + sizeof(*desc));
+ status = le16_to_cpu(desc->status);
+
+ if (!(status & RFD_STATUS_C))
+ return 0;
+
+ /* Valid frame status. */
+ if (status & RFD_STATUS_OK) {
+ /* A valid frame received. */
+ length = le32_to_cpu(desc->count) & 0x3fff;
+ /* Pass the packet up to the protocol layers. */
+ *packetp = desc->data;
+ return length;
+ }
- for (;;) {
- status = le16_to_cpu (rx_ring[rx_next].status);
+ /* There was an error. */
+ printf("RX error status = 0x%08X\n", status);
+ return -EINVAL;
+}
- if (!(status & RFD_STATUS_C)) {
- break;
- }
+static void eepro100_free_pkt_common(struct eepro100_priv *priv)
+{
+ struct eepro100_rxfd *rx_ring = priv->rx_ring;
+ struct eepro100_rxfd *desc;
+ int rx_prev;
- /* Valid frame status.
- */
- if ((status & RFD_STATUS_OK)) {
- /* A valid frame received.
- */
- length = le32_to_cpu (rx_ring[rx_next].count) & 0x3fff;
-
- /* Pass the packet up to the protocol
- * layers.
- */
- net_process_received_packet((u8 *)rx_ring[rx_next].data,
- length);
- } else {
- /* There was an error.
- */
- printf ("RX error status = 0x%08X\n", status);
- }
+ desc = &rx_ring[priv->rx_next];
- rx_ring[rx_next].control = cpu_to_le16 (RFD_CONTROL_S);
- rx_ring[rx_next].status = 0;
- rx_ring[rx_next].count = cpu_to_le32 (PKTSIZE_ALIGN << 16);
+ desc->control = cpu_to_le16(RFD_CONTROL_S);
+ desc->status = 0;
+ desc->count = cpu_to_le32(PKTSIZE_ALIGN << 16);
+ flush_dcache_range((unsigned long)desc,
+ (unsigned long)desc + sizeof(*desc));
- rx_prev = (rx_next + NUM_RX_DESC - 1) % NUM_RX_DESC;
- rx_ring[rx_prev].control = 0;
+ rx_prev = (priv->rx_next + NUM_RX_DESC - 1) % NUM_RX_DESC;
+ desc = &rx_ring[rx_prev];
+ desc->control = 0;
+ flush_dcache_range((unsigned long)desc,
+ (unsigned long)desc + sizeof(*desc));
- /* Update entry information.
- */
- rx_next = (rx_next + 1) % NUM_RX_DESC;
- }
+ /* Update entry information. */
+ priv->rx_next = (priv->rx_next + 1) % NUM_RX_DESC;
- if (stat & SCB_STATUS_RNR) {
+ if (!(priv->rx_stat & SCB_STATUS_RNR))
+ return;
- printf ("%s: Receiver is not ready, restart it !\n", dev->name);
+ printf("%s: Receiver is not ready, restart it !\n", priv->name);
- /* Reinitialize Rx ring.
- */
- init_rx_ring (dev);
+ /* Reinitialize Rx ring. */
+ init_rx_ring(priv);
- if (!wait_for_eepro100 (dev)) {
- printf ("Error: Can not restart ethernet controller.\n");
- goto Done;
- }
-
- OUTL (dev, phys_to_bus ((u32) & rx_ring[rx_next]), SCBPointer);
- OUTW (dev, SCB_M | RUC_START, SCBCmd);
+ if (!wait_for_eepro100(priv)) {
+ printf("Error: Can not restart ethernet controller.\n");
+ return;
}
- Done:
- return length;
+ /* RX ring cache was already flushed in init_rx_ring() */
+ OUTL(priv, phys_to_bus(priv->devno, (u32)&rx_ring[priv->rx_next]),
+ SCB_POINTER);
+ OUTW(priv, SCB_M | RUC_START, SCB_CMD);
}
-static void eepro100_halt (struct eth_device *dev)
+static void eepro100_halt_common(struct eepro100_priv *priv)
{
- /* Reset the ethernet controller
- */
- OUTL (dev, I82559_SELECTIVE_RESET, SCBPort);
+ /* Reset the ethernet controller */
+ OUTL(priv, I82559_SELECTIVE_RESET, SCB_PORT);
udelay(20);
- OUTL (dev, I82559_RESET, SCBPort);
+ OUTL(priv, I82559_RESET, SCB_PORT);
udelay(20);
- if (!wait_for_eepro100 (dev)) {
- printf ("Error: Can not reset ethernet controller.\n");
- goto Done;
+ if (!wait_for_eepro100(priv)) {
+ printf("Error: Can not reset ethernet controller.\n");
+ goto done;
}
- OUTL (dev, 0, SCBPointer);
- OUTW (dev, SCB_M | RUC_ADDR_LOAD, SCBCmd);
+ OUTL(priv, 0, SCB_POINTER);
+ OUTW(priv, SCB_M | RUC_ADDR_LOAD, SCB_CMD);
- if (!wait_for_eepro100 (dev)) {
- printf ("Error: Can not reset ethernet controller.\n");
- goto Done;
+ if (!wait_for_eepro100(priv)) {
+ printf("Error: Can not reset ethernet controller.\n");
+ goto done;
}
- OUTL (dev, 0, SCBPointer);
- OUTW (dev, SCB_M | CU_ADDR_LOAD, SCBCmd);
+ OUTL(priv, 0, SCB_POINTER);
+ OUTW(priv, SCB_M | CU_ADDR_LOAD, SCB_CMD);
- Done:
+done:
return;
}
- /* SROM Read.
- */
-static int read_eeprom (struct eth_device *dev, int location, int addr_len)
+#ifndef CONFIG_DM_ETH
+static int eepro100_init(struct eth_device *dev, bd_t *bis)
{
- unsigned short retval = 0;
- int read_cmd = location | EE_READ_CMD;
- int i;
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
- OUTW (dev, EE_ENB & ~EE_CS, SCBeeprom);
- OUTW (dev, EE_ENB, SCBeeprom);
+ return eepro100_init_common(priv);
+}
- /* Shift the read command bits out. */
- for (i = 12; i >= 0; i--) {
- short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+static void eepro100_halt(struct eth_device *dev)
+{
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
- OUTW (dev, EE_ENB | dataval, SCBeeprom);
- udelay(1);
- OUTW (dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
- udelay(1);
- }
- OUTW (dev, EE_ENB, SCBeeprom);
+ eepro100_halt_common(priv);
+}
- for (i = 15; i >= 0; i--) {
- OUTW (dev, EE_ENB | EE_SHIFT_CLK, SCBeeprom);
- udelay(1);
- retval = (retval << 1) |
- ((INW (dev, SCBeeprom) & EE_DATA_READ) ? 1 : 0);
- OUTW (dev, EE_ENB, SCBeeprom);
- udelay(1);
- }
+static int eepro100_send(struct eth_device *dev, void *packet, int length)
+{
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
- /* Terminate the EEPROM access. */
- OUTW (dev, EE_ENB & ~EE_CS, SCBeeprom);
- return retval;
+ return eepro100_send_common(priv, packet, length);
}
-#ifdef CONFIG_EEPRO100_SROM_WRITE
-int eepro100_write_eeprom (struct eth_device* dev, int location, int addr_len, unsigned short data)
-{
- unsigned short dataval;
- int enable_cmd = 0x3f | EE_EWENB_CMD;
- int write_cmd = location | EE_WRITE_CMD;
- int i;
- unsigned long datalong, tmplong;
-
- OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
- udelay(1);
- OUTW(dev, EE_ENB, SCBeeprom);
-
- /* Shift the enable command bits out. */
- for (i = (addr_len+EE_CMD_BITS-1); i >= 0; i--)
- {
- dataval = (enable_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
- OUTW(dev, EE_ENB | dataval, SCBeeprom);
- udelay(1);
- OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
- udelay(1);
- }
-
- OUTW(dev, EE_ENB, SCBeeprom);
- udelay(1);
- OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
- udelay(1);
- OUTW(dev, EE_ENB, SCBeeprom);
-
-
- /* Shift the write command bits out. */
- for (i = (addr_len+EE_CMD_BITS-1); i >= 0; i--)
- {
- dataval = (write_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
- OUTW(dev, EE_ENB | dataval, SCBeeprom);
- udelay(1);
- OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
- udelay(1);
- }
-
- /* Write the data */
- datalong= (unsigned long) ((((data) & 0x00ff) << 8) | ( (data) >> 8));
-
- for (i = 0; i< EE_DATA_BITS; i++)
- {
- /* Extract and move data bit to bit DI */
- dataval = ((datalong & 0x8000)>>13) ? EE_DATA_WRITE : 0;
-
- OUTW(dev, EE_ENB | dataval, SCBeeprom);
- udelay(1);
- OUTW(dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
- udelay(1);
- OUTW(dev, EE_ENB | dataval, SCBeeprom);
- udelay(1);
-
- datalong = datalong << 1; /* Adjust significant data bit*/
- }
-
- /* Finish up command (toggle CS) */
- OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
- udelay(1); /* delay for more than 250 ns */
- OUTW(dev, EE_ENB, SCBeeprom);
-
- /* Wait for programming ready (D0 = 1) */
- tmplong = 10;
- do
- {
- dataval = INW(dev, SCBeeprom);
- if (dataval & EE_DATA_READ)
- break;
- udelay(10000);
- }
- while (-- tmplong);
-
- if (tmplong == 0)
- {
- printf ("Write i82559 eeprom timed out (100 ms waiting for data ready.\n");
- return -1;
- }
-
- /* Terminate the EEPROM access. */
- OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom);
-
- return 0;
+static int eepro100_recv(struct eth_device *dev)
+{
+ struct eepro100_priv *priv =
+ container_of(dev, struct eepro100_priv, dev);
+ uchar *packet;
+ int ret;
+
+ ret = eepro100_recv_common(priv, &packet);
+ if (ret > 0)
+ net_process_received_packet(packet, ret);
+ if (ret)
+ eepro100_free_pkt_common(priv);
+
+ return ret;
}
-#endif
-static void init_rx_ring (struct eth_device *dev)
+int eepro100_initialize(bd_t *bis)
{
- int i;
+ struct eepro100_priv *priv;
+ struct eth_device *dev;
+ int card_number = 0;
+ u32 iobase, status;
+ pci_dev_t devno;
+ int idx = 0;
+ int ret;
- for (i = 0; i < NUM_RX_DESC; i++) {
- rx_ring[i].status = 0;
- rx_ring[i].control =
- (i == NUM_RX_DESC - 1) ? cpu_to_le16 (RFD_CONTROL_S) : 0;
- rx_ring[i].link =
- cpu_to_le32 (phys_to_bus
- ((u32) & rx_ring[(i + 1) % NUM_RX_DESC]));
- rx_ring[i].rx_buf_addr = 0xffffffff;
- rx_ring[i].count = cpu_to_le32 (PKTSIZE_ALIGN << 16);
+ while (1) {
+ /* Find PCI device */
+ devno = pci_find_devices(supported, idx++);
+ if (devno < 0)
+ break;
+
+ pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
+ iobase &= ~0xf;
+
+ debug("eepro100: Intel i82559 PCI EtherExpressPro @0x%x\n",
+ iobase);
+
+ pci_write_config_dword(devno, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* Check if I/O accesses and Bus Mastering are enabled. */
+ pci_read_config_dword(devno, PCI_COMMAND, &status);
+ if (!(status & PCI_COMMAND_MEMORY)) {
+ printf("Error: Can not enable MEM access.\n");
+ continue;
+ }
+
+ if (!(status & PCI_COMMAND_MASTER)) {
+ printf("Error: Can not enable Bus Mastering.\n");
+ continue;
+ }
+
+ priv = calloc(1, sizeof(*priv));
+ if (!priv) {
+ printf("eepro100: Can not allocate memory\n");
+ break;
+ }
+ dev = &priv->dev;
+
+ sprintf(dev->name, "i82559#%d", card_number);
+ priv->name = dev->name;
+ /* this have to come before bus_to_phys() */
+ priv->devno = devno;
+ priv->iobase = (void __iomem *)bus_to_phys(devno, iobase);
+ priv->enetaddr = dev->enetaddr;
+
+ dev->init = eepro100_init;
+ dev->halt = eepro100_halt;
+ dev->send = eepro100_send;
+ dev->recv = eepro100_recv;
+
+ eth_register(dev);
+
+ ret = eepro100_initialize_mii(priv);
+ if (ret) {
+ eth_unregister(dev);
+ free(priv);
+ return ret;
+ }
+
+ card_number++;
+
+ /* Set the latency timer for value. */
+ pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
+
+ udelay(10 * 1000);
+
+ eepro100_get_hwaddr(priv);
}
- rx_next = 0;
+ return card_number;
}
-static void purge_tx_ring (struct eth_device *dev)
+#else /* DM_ETH */
+static int eepro100_start(struct udevice *dev)
{
- int i;
+ struct eth_pdata *plat = dev_get_platdata(dev);
+ struct eepro100_priv *priv = dev_get_priv(dev);
+
+ memcpy(priv->enetaddr, plat->enetaddr, sizeof(plat->enetaddr));
- tx_next = 0;
- tx_threshold = 0x01208000;
+ return eepro100_init_common(priv);
+}
- for (i = 0; i < NUM_TX_DESC; i++) {
- tx_ring[i].status = 0;
- tx_ring[i].command = 0;
- tx_ring[i].link = 0;
- tx_ring[i].tx_desc_addr = 0;
- tx_ring[i].count = 0;
+static void eepro100_stop(struct udevice *dev)
+{
+ struct eepro100_priv *priv = dev_get_priv(dev);
- tx_ring[i].tx_buf_addr0 = 0;
- tx_ring[i].tx_buf_size0 = 0;
- tx_ring[i].tx_buf_addr1 = 0;
- tx_ring[i].tx_buf_size1 = 0;
- }
+ eepro100_halt_common(priv);
}
-static void read_hw_addr (struct eth_device *dev, bd_t * bis)
+static int eepro100_send(struct udevice *dev, void *packet, int length)
{
- u16 sum = 0;
- int i, j;
- int addr_len = read_eeprom (dev, 0, 6) == 0xffff ? 8 : 6;
+ struct eepro100_priv *priv = dev_get_priv(dev);
+ int ret;
- for (j = 0, i = 0; i < 0x40; i++) {
- u16 value = read_eeprom (dev, i, addr_len);
+ ret = eepro100_send_common(priv, packet, length);
- sum += value;
- if (i < 3) {
- dev->enetaddr[j++] = value;
- dev->enetaddr[j++] = value >> 8;
- }
- }
+ return ret ? 0 : -ETIMEDOUT;
+}
- if (sum != 0xBABA) {
- memset (dev->enetaddr, 0, ETH_ALEN);
-#ifdef DEBUG
- printf ("%s: Invalid EEPROM checksum %#4.4x, "
- "check settings before activating this device!\n",
- dev->name, sum);
-#endif
+static int eepro100_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+ struct eepro100_priv *priv = dev_get_priv(dev);
+
+ return eepro100_recv_common(priv, packetp);
+}
+
+static int eepro100_free_pkt(struct udevice *dev, uchar *packet, int length)
+{
+ struct eepro100_priv *priv = dev_get_priv(dev);
+
+ eepro100_free_pkt_common(priv);
+
+ return 0;
+}
+
+static int eepro100_read_rom_hwaddr(struct udevice *dev)
+{
+ struct eepro100_priv *priv = dev_get_priv(dev);
+
+ eepro100_get_hwaddr(priv);
+
+ return 0;
+}
+
+static int eepro100_bind(struct udevice *dev)
+{
+ static int card_number;
+ char name[16];
+
+ sprintf(name, "eepro100#%u", card_number++);
+
+ return device_set_name(dev, name);
+}
+
+static int eepro100_probe(struct udevice *dev)
+{
+ struct eth_pdata *plat = dev_get_platdata(dev);
+ struct eepro100_priv *priv = dev_get_priv(dev);
+ u16 command, status;
+ u32 iobase;
+ int ret;
+
+ dm_pci_read_config32(dev, PCI_BASE_ADDRESS_0, &iobase);
+ iobase &= ~0xf;
+
+ debug("eepro100: Intel i82559 PCI EtherExpressPro @0x%x\n", iobase);
+
+ priv->devno = dev;
+ priv->enetaddr = plat->enetaddr;
+ priv->iobase = (void __iomem *)bus_to_phys(dev, iobase);
+
+ command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ dm_pci_write_config16(dev, PCI_COMMAND, command);
+ dm_pci_read_config16(dev, PCI_COMMAND, &status);
+ if ((status & command) != command) {
+ printf("eepro100: Couldn't enable IO access or Bus Mastering\n");
+ return -EINVAL;
}
+
+ ret = eepro100_initialize_mii(priv);
+ if (ret)
+ return ret;
+
+ dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x20);
+
+ return 0;
}
+
+static const struct eth_ops eepro100_ops = {
+ .start = eepro100_start,
+ .send = eepro100_send,
+ .recv = eepro100_recv,
+ .stop = eepro100_stop,
+ .free_pkt = eepro100_free_pkt,
+ .read_rom_hwaddr = eepro100_read_rom_hwaddr,
+};
+
+U_BOOT_DRIVER(eth_eepro100) = {
+ .name = "eth_eepro100",
+ .id = UCLASS_ETH,
+ .bind = eepro100_bind,
+ .probe = eepro100_probe,
+ .ops = &eepro100_ops,
+ .priv_auto_alloc_size = sizeof(struct eepro100_priv),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
+
+U_BOOT_PCI_DEVICE(eth_eepro100, supported);
+#endif
diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c
index 260a5a38cf..d9ab37b336 100644
--- a/drivers/net/pcnet.c
+++ b/drivers/net/pcnet.c
@@ -9,7 +9,9 @@
#include <common.h>
#include <cpu_func.h>
#include <log.h>
+#include <dm.h>
#include <malloc.h>
+#include <memalign.h>
#include <net.h>
#include <netdev.h>
#include <asm/cache.h>
@@ -74,17 +76,26 @@ struct pcnet_uncached_priv {
struct pcnet_rx_head rx_ring[RX_RING_SIZE];
struct pcnet_tx_head tx_ring[TX_RING_SIZE];
struct pcnet_init_block init_block;
-};
+} __aligned(ARCH_DMA_MINALIGN);
-typedef struct pcnet_priv {
- struct pcnet_uncached_priv *uc;
+struct pcnet_priv {
+ struct pcnet_uncached_priv ucp;
/* Receive Buffer space */
- unsigned char (*rx_buf)[RX_RING_SIZE][PKT_BUF_SZ + 4];
+ unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4];
+ struct pcnet_uncached_priv *uc;
+#ifdef CONFIG_DM_ETH
+ struct udevice *dev;
+ const char *name;
+#else
+ pci_dev_t dev;
+ char *name;
+#endif
+ void __iomem *iobase;
+ u8 *enetaddr;
+ u16 status;
int cur_rx;
int cur_tx;
-} pcnet_priv_t;
-
-static pcnet_priv_t *lp;
+};
/* Offsets from base I/O address for WIO mode */
#define PCNET_RDP 0x10
@@ -92,172 +103,74 @@ static pcnet_priv_t *lp;
#define PCNET_RESET 0x14
#define PCNET_BDP 0x16
-static u16 pcnet_read_csr(struct eth_device *dev, int index)
+static u16 pcnet_read_csr(struct pcnet_priv *lp, int index)
{
- void __iomem *base = (void __iomem *)dev->iobase;
-
- writew(index, base + PCNET_RAP);
- return readw(base + PCNET_RDP);
+ writew(index, lp->iobase + PCNET_RAP);
+ return readw(lp->iobase + PCNET_RDP);
}
-static void pcnet_write_csr(struct eth_device *dev, int index, u16 val)
+static void pcnet_write_csr(struct pcnet_priv *lp, int index, u16 val)
{
- void __iomem *base = (void __iomem *)dev->iobase;
-
- writew(index, base + PCNET_RAP);
- writew(val, base + PCNET_RDP);
+ writew(index, lp->iobase + PCNET_RAP);
+ writew(val, lp->iobase + PCNET_RDP);
}
-static u16 pcnet_read_bcr(struct eth_device *dev, int index)
+static u16 pcnet_read_bcr(struct pcnet_priv *lp, int index)
{
- void __iomem *base = (void __iomem *)dev->iobase;
-
- writew(index, base + PCNET_RAP);
- return readw(base + PCNET_BDP);
+ writew(index, lp->iobase + PCNET_RAP);
+ return readw(lp->iobase + PCNET_BDP);
}
-static void pcnet_write_bcr(struct eth_device *dev, int index, u16 val)
+static void pcnet_write_bcr(struct pcnet_priv *lp, int index, u16 val)
{
- void __iomem *base = (void __iomem *)dev->iobase;
-
- writew(index, base + PCNET_RAP);
- writew(val, base + PCNET_BDP);
+ writew(index, lp->iobase + PCNET_RAP);
+ writew(val, lp->iobase + PCNET_BDP);
}
-static void pcnet_reset(struct eth_device *dev)
+static void pcnet_reset(struct pcnet_priv *lp)
{
- void __iomem *base = (void __iomem *)dev->iobase;
-
- readw(base + PCNET_RESET);
+ readw(lp->iobase + PCNET_RESET);
}
-static int pcnet_check(struct eth_device *dev)
+static int pcnet_check(struct pcnet_priv *lp)
{
- void __iomem *base = (void __iomem *)dev->iobase;
-
- writew(88, base + PCNET_RAP);
- return readw(base + PCNET_RAP) == 88;
+ writew(88, lp->iobase + PCNET_RAP);
+ return readw(lp->iobase + PCNET_RAP) == 88;
}
-static int pcnet_init (struct eth_device *dev, bd_t * bis);
-static int pcnet_send(struct eth_device *dev, void *packet, int length);
-static int pcnet_recv (struct eth_device *dev);
-static void pcnet_halt (struct eth_device *dev);
-static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_num);
-
-static inline pci_addr_t pcnet_virt_to_mem(const struct eth_device *dev,
- void *addr)
+static inline pci_addr_t pcnet_virt_to_mem(struct pcnet_priv *lp, void *addr)
{
- pci_dev_t devbusfn = (pci_dev_t)(unsigned long)dev->priv;
void *virt_addr = addr;
- return pci_virt_to_mem(devbusfn, virt_addr);
+#ifdef CONFIG_DM_ETH
+ return dm_pci_virt_to_mem(lp->dev, virt_addr);
+#else
+ return pci_virt_to_mem(lp->dev, virt_addr);
+#endif
}
static struct pci_device_id supported[] = {
- {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE},
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE) },
{}
};
-
-int pcnet_initialize(bd_t *bis)
-{
- pci_dev_t devbusfn;
- struct eth_device *dev;
- u16 command, status;
- int dev_nr = 0;
- u32 bar;
-
- PCNET_DEBUG1("\npcnet_initialize...\n");
-
- for (dev_nr = 0;; dev_nr++) {
-
- /*
- * Find the PCnet PCI device(s).
- */
- devbusfn = pci_find_devices(supported, dev_nr);
- if (devbusfn < 0)
- break;
-
- /*
- * Allocate and pre-fill the device structure.
- */
- dev = (struct eth_device *)malloc(sizeof(*dev));
- if (!dev) {
- printf("pcnet: Can not allocate memory\n");
- break;
- }
- memset(dev, 0, sizeof(*dev));
- dev->priv = (void *)(unsigned long)devbusfn;
- sprintf(dev->name, "pcnet#%d", dev_nr);
-
- /*
- * Setup the PCI device.
- */
- pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &bar);
- dev->iobase = pci_mem_to_phys(devbusfn, bar);
- dev->iobase &= ~0xf;
-
- PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%lx: ",
- dev->name, devbusfn, (unsigned long)dev->iobase);
-
- command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
- pci_write_config_word(devbusfn, PCI_COMMAND, command);
- pci_read_config_word(devbusfn, PCI_COMMAND, &status);
- if ((status & command) != command) {
- printf("%s: Couldn't enable IO access or Bus Mastering\n",
- dev->name);
- free(dev);
- continue;
- }
-
- pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
-
- /*
- * Probe the PCnet chip.
- */
- if (pcnet_probe(dev, bis, dev_nr) < 0) {
- free(dev);
- continue;
- }
-
- /*
- * Setup device structure and register the driver.
- */
- dev->init = pcnet_init;
- dev->halt = pcnet_halt;
- dev->send = pcnet_send;
- dev->recv = pcnet_recv;
-
- eth_register(dev);
- }
-
- udelay(10 * 1000);
-
- return dev_nr;
-}
-
-static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr)
+static int pcnet_probe_common(struct pcnet_priv *lp)
{
int chip_version;
char *chipname;
-
-#ifdef PCNET_HAS_PROM
int i;
-#endif
/* Reset the PCnet controller */
- pcnet_reset(dev);
+ pcnet_reset(lp);
/* Check if register access is working */
- if (pcnet_read_csr(dev, 0) != 4 || !pcnet_check(dev)) {
- printf("%s: CSR register access check failed\n", dev->name);
+ if (pcnet_read_csr(lp, 0) != 4 || !pcnet_check(lp)) {
+ printf("%s: CSR register access check failed\n", lp->name);
return -1;
}
/* Identify the chip */
- chip_version =
- pcnet_read_csr(dev, 88) | (pcnet_read_csr(dev, 89) << 16);
+ chip_version = pcnet_read_csr(lp, 88) | (pcnet_read_csr(lp, 89) << 16);
if ((chip_version & 0xfff) != 0x003)
return -1;
chip_version = (chip_version >> 12) & 0xffff;
@@ -273,13 +186,12 @@ static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr)
break;
default:
printf("%s: PCnet version %#x not supported\n",
- dev->name, chip_version);
+ lp->name, chip_version);
return -1;
}
PCNET_DEBUG1("AMD %s\n", chipname);
-#ifdef PCNET_HAS_PROM
/*
* In most chips, after a chip reset, the ethernet address is read from
* the station address PROM at the base address and programmed into the
@@ -288,36 +200,35 @@ static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr)
for (i = 0; i < 3; i++) {
unsigned int val;
- val = pcnet_read_csr(dev, i + 12) & 0x0ffff;
+ val = pcnet_read_csr(lp, i + 12) & 0x0ffff;
/* There may be endianness issues here. */
- dev->enetaddr[2 * i] = val & 0x0ff;
- dev->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff;
+ lp->enetaddr[2 * i] = val & 0x0ff;
+ lp->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff;
}
-#endif /* PCNET_HAS_PROM */
return 0;
}
-static int pcnet_init(struct eth_device *dev, bd_t *bis)
+static int pcnet_init_common(struct pcnet_priv *lp)
{
struct pcnet_uncached_priv *uc;
int i, val;
unsigned long addr;
- PCNET_DEBUG1("%s: pcnet_init...\n", dev->name);
+ PCNET_DEBUG1("%s: %s...\n", lp->name, __func__);
/* Switch pcnet to 32bit mode */
- pcnet_write_bcr(dev, 20, 2);
+ pcnet_write_bcr(lp, 20, 2);
/* Set/reset autoselect bit */
- val = pcnet_read_bcr(dev, 2) & ~2;
+ val = pcnet_read_bcr(lp, 2) & ~2;
val |= 2;
- pcnet_write_bcr(dev, 2, val);
+ pcnet_write_bcr(lp, 2, val);
/* Enable auto negotiate, setup, disable fd */
- val = pcnet_read_bcr(dev, 32) & ~0x98;
+ val = pcnet_read_bcr(lp, 32) & ~0x98;
val |= 0x20;
- pcnet_write_bcr(dev, 32, val);
+ pcnet_write_bcr(lp, 32, val);
/*
* Enable NOUFLO on supported controllers, with the transmit
@@ -327,36 +238,12 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
* slower devices. Controllers which do not support NOUFLO will
* simply be left with a larger transmit FIFO threshold.
*/
- val = pcnet_read_bcr(dev, 18);
+ val = pcnet_read_bcr(lp, 18);
val |= 1 << 11;
- pcnet_write_bcr(dev, 18, val);
- val = pcnet_read_csr(dev, 80);
+ pcnet_write_bcr(lp, 18, val);
+ val = pcnet_read_csr(lp, 80);
val |= 0x3 << 10;
- pcnet_write_csr(dev, 80, val);
-
- /*
- * We only maintain one structure because the drivers will never
- * be used concurrently. In 32bit mode the RX and TX ring entries
- * must be aligned on 16-byte boundaries.
- */
- if (lp == NULL) {
- addr = (unsigned long)malloc(sizeof(pcnet_priv_t) + 0x10);
- addr = (addr + 0xf) & ~0xf;
- lp = (pcnet_priv_t *)addr;
-
- addr = (unsigned long)memalign(ARCH_DMA_MINALIGN,
- sizeof(*lp->uc));
- flush_dcache_range(addr, addr + sizeof(*lp->uc));
- addr = (unsigned long)map_physmem(addr,
- roundup(sizeof(*lp->uc), ARCH_DMA_MINALIGN),
- MAP_NOCACHE);
- lp->uc = (struct pcnet_uncached_priv *)addr;
-
- addr = (unsigned long)memalign(ARCH_DMA_MINALIGN,
- sizeof(*lp->rx_buf));
- flush_dcache_range(addr, addr + sizeof(*lp->rx_buf));
- lp->rx_buf = (void *)addr;
- }
+ pcnet_write_csr(lp, 80, val);
uc = lp->uc;
@@ -369,7 +256,7 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
*/
lp->cur_rx = 0;
for (i = 0; i < RX_RING_SIZE; i++) {
- addr = pcnet_virt_to_mem(dev, (*lp->rx_buf)[i]);
+ addr = pcnet_virt_to_mem(lp, lp->rx_buf[i]);
uc->rx_ring[i].base = cpu_to_le32(addr);
uc->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
uc->rx_ring[i].status = cpu_to_le16(0x8000);
@@ -395,15 +282,15 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->uc->init_block);
for (i = 0; i < 6; i++) {
- lp->uc->init_block.phys_addr[i] = dev->enetaddr[i];
+ lp->uc->init_block.phys_addr[i] = lp->enetaddr[i];
PCNET_DEBUG1(" %02x", lp->uc->init_block.phys_addr[i]);
}
uc->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
RX_RING_LEN_BITS);
- addr = pcnet_virt_to_mem(dev, uc->rx_ring);
+ addr = pcnet_virt_to_mem(lp, uc->rx_ring);
uc->init_block.rx_ring = cpu_to_le32(addr);
- addr = pcnet_virt_to_mem(dev, uc->tx_ring);
+ addr = pcnet_virt_to_mem(lp, uc->tx_ring);
uc->init_block.tx_ring = cpu_to_le32(addr);
PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
@@ -414,34 +301,34 @@ static int pcnet_init(struct eth_device *dev, bd_t *bis)
* Tell the controller where the Init Block is located.
*/
barrier();
- addr = pcnet_virt_to_mem(dev, &lp->uc->init_block);
- pcnet_write_csr(dev, 1, addr & 0xffff);
- pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff);
+ addr = pcnet_virt_to_mem(lp, &lp->uc->init_block);
+ pcnet_write_csr(lp, 1, addr & 0xffff);
+ pcnet_write_csr(lp, 2, (addr >> 16) & 0xffff);
- pcnet_write_csr(dev, 4, 0x0915);
- pcnet_write_csr(dev, 0, 0x0001); /* start */
+ pcnet_write_csr(lp, 4, 0x0915);
+ pcnet_write_csr(lp, 0, 0x0001); /* start */
/* Wait for Init Done bit */
for (i = 10000; i > 0; i--) {
- if (pcnet_read_csr(dev, 0) & 0x0100)
+ if (pcnet_read_csr(lp, 0) & 0x0100)
break;
udelay(10);
}
if (i <= 0) {
- printf("%s: TIMEOUT: controller init failed\n", dev->name);
- pcnet_reset(dev);
+ printf("%s: TIMEOUT: controller init failed\n", lp->name);
+ pcnet_reset(lp);
return -1;
}
/*
* Finally start network controller operation.
*/
- pcnet_write_csr(dev, 0, 0x0002);
+ pcnet_write_csr(lp, 0, 0x0002);
return 0;
}
-static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
+static int pcnet_send_common(struct pcnet_priv *lp, void *packet, int pkt_len)
{
int i, status;
u32 addr;
@@ -463,7 +350,7 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
}
if (i <= 0) {
printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
- dev->name, lp->cur_tx, status);
+ lp->name, lp->cur_tx, status);
pkt_len = 0;
goto failure;
}
@@ -472,14 +359,14 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
* Setup Tx ring. Caution: the write order is important here,
* set the status with the "ownership" bits last.
*/
- addr = pcnet_virt_to_mem(dev, packet);
+ addr = pcnet_virt_to_mem(lp, packet);
writew(-pkt_len, &entry->length);
writel(0, &entry->misc);
writel(addr, &entry->base);
writew(0x8300, &entry->status);
/* Trigger an immediate send poll. */
- pcnet_write_csr(dev, 0, 0x0008);
+ pcnet_write_csr(lp, 0, 0x0008);
failure:
if (++lp->cur_tx >= TX_RING_SIZE)
@@ -489,76 +376,323 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
return pkt_len;
}
-static int pcnet_recv (struct eth_device *dev)
+static int pcnet_recv_common(struct pcnet_priv *lp, unsigned char **bufp)
{
struct pcnet_rx_head *entry;
unsigned char *buf;
int pkt_len = 0;
- u16 status, err_status;
-
- while (1) {
- entry = &lp->uc->rx_ring[lp->cur_rx];
- /*
- * If we own the next entry, it's a new packet. Send it up.
- */
- status = readw(&entry->status);
- if ((status & 0x8000) != 0)
- break;
- err_status = status >> 8;
-
- if (err_status != 0x03) { /* There was an error. */
- printf("%s: Rx%d", dev->name, lp->cur_rx);
- PCNET_DEBUG1(" (status=0x%x)", err_status);
- if (err_status & 0x20)
- printf(" Frame");
- if (err_status & 0x10)
- printf(" Overflow");
- if (err_status & 0x08)
- printf(" CRC");
- if (err_status & 0x04)
- printf(" Fifo");
- printf(" Error\n");
- status &= 0x03ff;
-
- } else {
- pkt_len = (readl(&entry->msg_length) & 0xfff) - 4;
- if (pkt_len < 60) {
- printf("%s: Rx%d: invalid packet length %d\n",
- dev->name, lp->cur_rx, pkt_len);
- } else {
- buf = (*lp->rx_buf)[lp->cur_rx];
- invalidate_dcache_range((unsigned long)buf,
- (unsigned long)buf + pkt_len);
- net_process_received_packet(buf, pkt_len);
- PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n",
- lp->cur_rx, pkt_len, buf);
- }
- }
+ u16 err_status;
- status |= 0x8000;
- writew(status, &entry->status);
+ entry = &lp->uc->rx_ring[lp->cur_rx];
+ /*
+ * If we own the next entry, it's a new packet. Send it up.
+ */
+ lp->status = readw(&entry->status);
+ if ((lp->status & 0x8000) != 0)
+ return 0;
+ err_status = lp->status >> 8;
+
+ if (err_status != 0x03) { /* There was an error. */
+ printf("%s: Rx%d", lp->name, lp->cur_rx);
+ PCNET_DEBUG1(" (status=0x%x)", err_status);
+ if (err_status & 0x20)
+ printf(" Frame");
+ if (err_status & 0x10)
+ printf(" Overflow");
+ if (err_status & 0x08)
+ printf(" CRC");
+ if (err_status & 0x04)
+ printf(" Fifo");
+ printf(" Error\n");
+ lp->status &= 0x03ff;
+ return 0;
+ }
- if (++lp->cur_rx >= RX_RING_SIZE)
- lp->cur_rx = 0;
+ pkt_len = (readl(&entry->msg_length) & 0xfff) - 4;
+ if (pkt_len < 60) {
+ printf("%s: Rx%d: invalid packet length %d\n",
+ lp->name, lp->cur_rx, pkt_len);
+ return 0;
}
+
+ *bufp = lp->rx_buf[lp->cur_rx];
+ invalidate_dcache_range((unsigned long)*bufp,
+ (unsigned long)*bufp + pkt_len);
+
+ PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n",
+ lp->cur_rx, pkt_len, buf);
+
return pkt_len;
}
-static void pcnet_halt(struct eth_device *dev)
+static void pcnet_free_pkt_common(struct pcnet_priv *lp, unsigned int len)
+{
+ struct pcnet_rx_head *entry;
+
+ entry = &lp->uc->rx_ring[lp->cur_rx];
+
+ lp->status |= 0x8000;
+ writew(lp->status, &entry->status);
+
+ if (++lp->cur_rx >= RX_RING_SIZE)
+ lp->cur_rx = 0;
+}
+
+static void pcnet_halt_common(struct pcnet_priv *lp)
{
int i;
- PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name);
+ PCNET_DEBUG1("%s: %s...\n", lp->name, __func__);
/* Reset the PCnet controller */
- pcnet_reset(dev);
+ pcnet_reset(lp);
/* Wait for Stop bit */
for (i = 1000; i > 0; i--) {
- if (pcnet_read_csr(dev, 0) & 0x4)
+ if (pcnet_read_csr(lp, 0) & 0x4)
break;
udelay(10);
}
if (i <= 0)
- printf("%s: TIMEOUT: controller reset failed\n", dev->name);
+ printf("%s: TIMEOUT: controller reset failed\n", lp->name);
+}
+
+#ifndef CONFIG_DM_ETH
+static int pcnet_init(struct eth_device *dev, bd_t *bis)
+{
+ struct pcnet_priv *lp = dev->priv;
+
+ return pcnet_init_common(lp);
+}
+
+static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len)
+{
+ struct pcnet_priv *lp = dev->priv;
+
+ return pcnet_send_common(lp, packet, pkt_len);
+}
+
+static int pcnet_recv(struct eth_device *dev)
+{
+ struct pcnet_priv *lp = dev->priv;
+ uchar *packet;
+ int ret;
+
+ ret = pcnet_recv_common(lp, &packet);
+ if (ret > 0)
+ net_process_received_packet(packet, ret);
+ if (ret)
+ pcnet_free_pkt_common(lp, ret);
+
+ return ret;
+}
+
+static void pcnet_halt(struct eth_device *dev)
+{
+ struct pcnet_priv *lp = dev->priv;
+
+ pcnet_halt_common(lp);
+}
+
+int pcnet_initialize(bd_t *bis)
+{
+ pci_dev_t devbusfn;
+ struct eth_device *dev;
+ struct pcnet_priv *lp;
+ u16 command, status;
+ int dev_nr = 0;
+ u32 bar;
+
+ PCNET_DEBUG1("\n%s...\n", __func__);
+
+ for (dev_nr = 0; ; dev_nr++) {
+ /*
+ * Find the PCnet PCI device(s).
+ */
+ devbusfn = pci_find_devices(supported, dev_nr);
+ if (devbusfn < 0)
+ break;
+
+ /*
+ * Allocate and pre-fill the device structure.
+ */
+ dev = calloc(1, sizeof(*dev));
+ if (!dev) {
+ printf("pcnet: Can not allocate memory\n");
+ break;
+ }
+
+ /*
+ * We only maintain one structure because the drivers will
+ * never be used concurrently. In 32bit mode the RX and TX
+ * ring entries must be aligned on 16-byte boundaries.
+ */
+ lp = malloc_cache_aligned(sizeof(*lp));
+ lp->uc = map_physmem((phys_addr_t)&lp->ucp,
+ sizeof(lp->ucp), MAP_NOCACHE);
+ lp->dev = devbusfn;
+ flush_dcache_range((unsigned long)lp,
+ (unsigned long)lp + sizeof(*lp));
+ dev->priv = lp;
+ sprintf(dev->name, "pcnet#%d", dev_nr);
+ lp->name = dev->name;
+ lp->enetaddr = dev->enetaddr;
+
+ /*
+ * Setup the PCI device.
+ */
+ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &bar);
+ lp->iobase = (void *)(pci_mem_to_phys(devbusfn, bar) & ~0xf);
+
+ PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%p: ",
+ lp->name, devbusfn, lp->iobase);
+
+ command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ pci_write_config_word(devbusfn, PCI_COMMAND, command);
+ pci_read_config_word(devbusfn, PCI_COMMAND, &status);
+ if ((status & command) != command) {
+ printf("%s: Couldn't enable IO access or Bus Mastering\n",
+ lp->name);
+ free(dev);
+ continue;
+ }
+
+ pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
+
+ /*
+ * Probe the PCnet chip.
+ */
+ if (pcnet_probe_common(lp) < 0) {
+ free(dev);
+ continue;
+ }
+
+ /*
+ * Setup device structure and register the driver.
+ */
+ dev->init = pcnet_init;
+ dev->halt = pcnet_halt;
+ dev->send = pcnet_send;
+ dev->recv = pcnet_recv;
+
+ eth_register(dev);
+ }
+
+ udelay(10 * 1000);
+
+ return dev_nr;
+}
+#else /* DM_ETH */
+static int pcnet_start(struct udevice *dev)
+{
+ struct eth_pdata *plat = dev_get_platdata(dev);
+ struct pcnet_priv *priv = dev_get_priv(dev);
+
+ memcpy(priv->enetaddr, plat->enetaddr, sizeof(plat->enetaddr));
+
+ return pcnet_init_common(priv);
+}
+
+static void pcnet_stop(struct udevice *dev)
+{
+ struct pcnet_priv *priv = dev_get_priv(dev);
+
+ pcnet_halt_common(priv);
+}
+
+static int pcnet_send(struct udevice *dev, void *packet, int length)
+{
+ struct pcnet_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = pcnet_send_common(priv, packet, length);
+
+ return ret ? 0 : -ETIMEDOUT;
}
+
+static int pcnet_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+ struct pcnet_priv *priv = dev_get_priv(dev);
+
+ return pcnet_recv_common(priv, packetp);
+}
+
+static int pcnet_free_pkt(struct udevice *dev, uchar *packet, int length)
+{
+ struct pcnet_priv *priv = dev_get_priv(dev);
+
+ pcnet_free_pkt_common(priv, length);
+
+ return 0;
+}
+
+static int pcnet_bind(struct udevice *dev)
+{
+ static int card_number;
+ char name[16];
+
+ sprintf(name, "pcnet#%u", card_number++);
+
+ return device_set_name(dev, name);
+}
+
+static int pcnet_probe(struct udevice *dev)
+{
+ struct eth_pdata *plat = dev_get_platdata(dev);
+ struct pcnet_priv *lp = dev_get_priv(dev);
+ u16 command, status;
+ u32 iobase;
+ int ret;
+
+ dm_pci_read_config32(dev, PCI_BASE_ADDRESS_1, &iobase);
+ iobase &= ~0xf;
+
+ lp->uc = map_physmem((phys_addr_t)&lp->ucp,
+ sizeof(lp->ucp), MAP_NOCACHE);
+ lp->dev = dev;
+ lp->name = dev->name;
+ lp->enetaddr = plat->enetaddr;
+ lp->iobase = (void *)dm_pci_mem_to_phys(dev, iobase);
+
+ flush_dcache_range((unsigned long)lp,
+ (unsigned long)lp + sizeof(*lp));
+
+ command = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ dm_pci_write_config16(dev, PCI_COMMAND, command);
+ dm_pci_read_config16(dev, PCI_COMMAND, &status);
+ if ((status & command) != command) {
+ printf("%s: Couldn't enable IO access or Bus Mastering\n",
+ lp->name);
+ return -EINVAL;
+ }
+
+ dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x20);
+
+ ret = pcnet_probe_common(lp);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct eth_ops pcnet_ops = {
+ .start = pcnet_start,
+ .send = pcnet_send,
+ .recv = pcnet_recv,
+ .stop = pcnet_stop,
+ .free_pkt = pcnet_free_pkt,
+};
+
+U_BOOT_DRIVER(eth_pcnet) = {
+ .name = "eth_pcnet",
+ .id = UCLASS_ETH,
+ .bind = pcnet_bind,
+ .probe = pcnet_probe,
+ .ops = &pcnet_ops,
+ .priv_auto_alloc_size = sizeof(struct pcnet_priv),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+ .flags = DM_UC_FLAG_ALLOC_PRIV_DMA,
+};
+
+U_BOOT_PCI_DEVICE(eth_pcnet, supported);
+#endif
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index da68f3ccca..21594b4d38 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -239,7 +239,6 @@
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCIE
-#define CONFIG_EEPRO100
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index eaa95bbeff..0cd2e08459 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -172,7 +172,6 @@
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_PCI_SKIP_HOST_BRIDGE
-#undef CONFIG_EEPRO100
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index d2d1b2fa47..ae79369c6b 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -196,7 +196,6 @@
#define CONFIG_83XX_PCI_STREAMING
-#undef CONFIG_EEPRO100
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 4707dcf1ab..41ef3d80e1 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -220,7 +220,6 @@
#define CONFIG_83XX_PCI_STREAMING
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h
index d92312b408..4b43ee1d44 100644
--- a/include/configs/MPC8349EMDS_SDRAM.h
+++ b/include/configs/MPC8349EMDS_SDRAM.h
@@ -275,7 +275,6 @@
#define CONFIG_83XX_PCI_STREAMING
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index b5660f9ff5..49d4aef9ad 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -238,7 +238,6 @@ extern int board_pci_host_broken(void);
#define CONFIG_USB_EHCI_FSL
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#undef CONFIG_EEPRO100
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
#endif /* CONFIG_PCI */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index f78782a1c1..19859671cd 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -236,7 +236,6 @@
#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */
#if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index b2a3201072..013bd775dd 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -282,7 +282,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_MPC85XX_PCI2
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index c9f193fc46..1dd030842a 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -258,7 +258,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
#endif
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#ifndef CONFIG_PCI_PNP
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index de2bfd8f2f..e3044f0ae6 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -380,7 +380,6 @@ extern unsigned long get_clock_freq(void);
#endif
#if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_DM_PCI)
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index d964b4e121..70289f570a 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -280,7 +280,6 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_MPC85XX_PCI2
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 97d8cc48ed..fc4040907a 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -233,7 +233,6 @@
#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */
#if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index a0bd5f4d40..60caea4a4c 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -290,7 +290,6 @@ extern unsigned long get_clock_freq(void);
#endif /* CONFIG_QE */
#if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index beba848214..4d6a3d0a7d 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -396,7 +396,6 @@ extern unsigned long get_clock_freq(void);
#endif /* CONFIG_QE */
#if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 3243f39df4..bad9142921 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -443,7 +443,6 @@
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
#endif
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#ifndef CONFIG_PCI_PNP
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index edbeeefdd4..78d1dd2c37 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -334,7 +334,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
/************************************************************
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 40fe62fdf0..d43d217956 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -167,8 +167,6 @@
#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE
#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */
-#undef CONFIG_EEPRO100
-#define CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/caddy2.h b/include/configs/caddy2.h
index 35f4b74727..a7c667711b 100644
--- a/include/configs/caddy2.h
+++ b/include/configs/caddy2.h
@@ -155,7 +155,6 @@
#if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index cc18347ff6..96c1d53b9b 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -35,7 +35,6 @@
*/
#define CONFIG_TULIP
-#define CONFIG_EEPRO100
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
/*-----------------------------------------------------------------------
diff --git a/include/configs/malta.h b/include/configs/malta.h
index 773d7c23ed..9602773ff9 100644
--- a/include/configs/malta.h
+++ b/include/configs/malta.h
@@ -15,8 +15,6 @@
#define CONFIG_PCI_GT64120
#define CONFIG_PCI_MSC01
-#define CONFIG_PCNET
-#define PCNET_HAS_PROM
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 5adf5a8ca4..cca596d43a 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -180,7 +180,6 @@
#if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 55c4bff28a..503b9b1cb5 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -434,7 +434,6 @@
#endif
#if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 4ab364ae9a..66c1f3595b 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -276,7 +276,6 @@
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 3f578720e5..52d632ba0a 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -155,7 +155,6 @@
#if defined(CONFIG_PCI)
-#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
#if !defined(CONFIG_PCI_PNP)
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index f6bf6f2474..1165e88c28 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -399,8 +399,6 @@ CONFIG_EDB93XX_SDCS0
CONFIG_EDB93XX_SDCS1
CONFIG_EDB93XX_SDCS2
CONFIG_EDB93XX_SDCS3
-CONFIG_EEPRO100
-CONFIG_EEPRO100_SROM_WRITE
CONFIG_EFLASH_PROTSECTORS
CONFIG_EHCI_DESC_BIG_ENDIAN
CONFIG_EHCI_HCD_INIT_AFTER_RESET