summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/spi/xilinx_spi.c6
-rw-r--r--drivers/spi/zynq_qspi.c6
-rw-r--r--drivers/spi/zynq_spi.c6
-rw-r--r--scripts/config_whitelist.txt3
4 files changed, 6 insertions, 15 deletions
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 05768eef72..348630faf3 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -76,9 +76,7 @@
SPICR_SPE)
#define XILSPI_SPICR_DFLT_OFF (SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS)
-#ifndef CONFIG_XILINX_SPI_IDLE_VAL
-#define CONFIG_XILINX_SPI_IDLE_VAL GENMASK(7, 0)
-#endif
+#define XILINX_SPI_IDLE_VAL GENMASK(7, 0)
#define XILINX_SPISR_TIMEOUT 10000 /* in milliseconds */
@@ -176,7 +174,7 @@ static u32 xilinx_spi_fill_txfifo(struct udevice *bus, const u8 *txp,
while (txbytes && !(readl(&regs->spisr) & SPISR_TX_FULL) &&
i < priv->fifo_depth) {
- d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL;
+ d = txp ? *txp++ : XILINX_SPI_IDLE_VAL;
debug("spi_xfer: tx:%x ", d);
/* write out and wait for processing (receive data) */
writel(d & SPIDTR_8BIT_MASK, &regs->spidtr);
diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c
index db473da6ea..3f39ef05f2 100644
--- a/drivers/spi/zynq_qspi.c
+++ b/drivers/spi/zynq_qspi.c
@@ -47,9 +47,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define ZYNQ_QSPI_CR_SS_SHIFT 10 /* Slave select shift */
#define ZYNQ_QSPI_FIFO_DEPTH 63
-#ifndef CONFIG_SYS_ZYNQ_QSPI_WAIT
-#define CONFIG_SYS_ZYNQ_QSPI_WAIT CONFIG_SYS_HZ/100 /* 10 ms */
-#endif
+#define ZYNQ_QSPI_WAIT (CONFIG_SYS_HZ / 100) /* 10 ms */
/* zynq qspi register set */
struct zynq_qspi_regs {
@@ -350,7 +348,7 @@ static int zynq_qspi_irq_poll(struct zynq_qspi_priv *priv)
do {
status = readl(&regs->isr);
} while ((status == 0) &&
- (get_timer(timeout) < CONFIG_SYS_ZYNQ_QSPI_WAIT));
+ (get_timer(timeout) < ZYNQ_QSPI_WAIT));
if (status == 0) {
printf("zynq_qspi_irq_poll: Timeout!\n");
diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c
index 3e66b34ebb..78ffd3e2fe 100644
--- a/drivers/spi/zynq_spi.c
+++ b/drivers/spi/zynq_spi.c
@@ -36,9 +36,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define ZYNQ_SPI_CR_SS_SHIFT 10 /* Slave select shift */
#define ZYNQ_SPI_FIFO_DEPTH 128
-#ifndef CONFIG_SYS_ZYNQ_SPI_WAIT
-#define CONFIG_SYS_ZYNQ_SPI_WAIT (CONFIG_SYS_HZ/100) /* 10 ms */
-#endif
+#define ZYNQ_SPI_WAIT (CONFIG_SYS_HZ / 100) /* 10 ms */
/* zynq spi register set */
struct zynq_spi_regs {
@@ -251,7 +249,7 @@ static int zynq_spi_xfer(struct udevice *dev, unsigned int bitlen,
ts = get_timer(0);
status = readl(&regs->isr);
while (!(status & ZYNQ_SPI_IXR_TXOW_MASK)) {
- if (get_timer(ts) > CONFIG_SYS_ZYNQ_SPI_WAIT) {
+ if (get_timer(ts) > ZYNQ_SPI_WAIT) {
printf("spi_xfer: Timeout! TX FIFO not full\n");
return -1;
}
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 916768f361..b023806efc 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3984,8 +3984,6 @@ CONFIG_SYS_XHCI_USB1_ADDR
CONFIG_SYS_XHCI_USB2_ADDR
CONFIG_SYS_XHCI_USB3_ADDR
CONFIG_SYS_XIMG_LEN
-CONFIG_SYS_ZYNQ_QSPI_WAIT
-CONFIG_SYS_ZYNQ_SPI_WAIT
CONFIG_SYS_i2C_FSL
CONFIG_TAM3517_SETTINGS
CONFIG_TCA642X
@@ -4211,7 +4209,6 @@ CONFIG_X86_MRC_ADDR
CONFIG_X86_REFCODE_ADDR
CONFIG_X86_REFCODE_RUN_ADDR
CONFIG_XGI_XG22_BASE
-CONFIG_XILINX_SPI_IDLE_VAL
CONFIG_XSENGINE
CONFIG_XTFPGA
CONFIG_YAFFSFS_PROVIDE_VALUES