summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/phy/aquantia.c17
1 files changed, 9 insertions, 8 deletions
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index c4bd443001..25d30a65e7 100644
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -306,30 +306,29 @@ struct {
AQUANTIA_VND1_GSTART_RATE_1G},
[PHY_INTERFACE_MODE_SGMII_2500] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G,
AQUANTIA_VND1_GSTART_RATE_2_5G},
- [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G,
- AQUANTIA_VND1_GSTART_RATE_10G},
[PHY_INTERFACE_MODE_XFI] = {0x100, AQUANTIA_VND1_GSYSCFG_10G,
AQUANTIA_VND1_GSTART_RATE_10G},
[PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G,
AQUANTIA_VND1_GSTART_RATE_10G},
};
-static int aquantia_set_proto(struct phy_device *phydev)
+static int aquantia_set_proto(struct phy_device *phydev,
+ phy_interface_t interface)
{
int i;
- if (!aquantia_syscfg[phydev->interface].cnt)
+ if (!aquantia_syscfg[interface].cnt)
return 0;
/* set the default rate to enable the SI link */
phy_write(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
- aquantia_syscfg[phydev->interface].start_rate);
+ aquantia_syscfg[interface].start_rate);
/* set selected protocol for all relevant line side link speeds */
- for (i = 0; i <= aquantia_syscfg[phydev->interface].cnt; i++)
+ for (i = 0; i <= aquantia_syscfg[interface].cnt; i++)
phy_write(phydev, MDIO_MMD_VEND1,
AQUANTIA_VND1_GSYSCFG_BASE + i,
- aquantia_syscfg[phydev->interface].syscfg);
+ aquantia_syscfg[interface].syscfg);
return 0;
}
@@ -444,6 +443,8 @@ int aquantia_config(struct phy_device *phydev)
* on FW config
*/
if (interface == PHY_INTERFACE_MODE_XGMII) {
+ debug("use XFI or USXGMII SI protos, XGMII is not valid\n");
+
reg_val1 = phy_read(phydev, MDIO_MMD_PHYXS,
AQUANTIA_SYSTEM_INTERFACE_SR);
if ((reg_val1 & AQUANTIA_SI_IN_USE_MASK) == AQUANTIA_SI_USXGMII)
@@ -466,7 +467,7 @@ int aquantia_config(struct phy_device *phydev)
mdelay(10);
/* configure protocol based on phydev->interface */
- aquantia_set_proto(phydev);
+ aquantia_set_proto(phydev, interface);
/* apply custom configuration based on DT */
aquantia_dts_config(phydev);