summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/riscv/Kconfig13
-rw-r--r--arch/riscv/cpu/start.S14
-rw-r--r--arch/riscv/include/asm/global_data.h2
-rw-r--r--arch/riscv/lib/Makefile2
-rw-r--r--arch/riscv/lib/spl.c2
-rw-r--r--common/spl/spl_opensbi.c2
6 files changed, 23 insertions, 12 deletions
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 3061bf8863..5ef6849cce 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -200,10 +200,21 @@ config SMP
machine. If you say Y here, U-Boot will run on many, but not
all, single processor machines.
+config SPL_SMP
+ bool "Symmetric Multi-Processing in SPL"
+ depends on SPL && SPL_RISCV_MMODE
+ default y
+ help
+ This enables support for systems with more than one CPU in SPL.
+ If you say N here, U-Boot SPL will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor
+ machine. If you say Y here, U-Boot SPL will run on many, but not
+ all, single processor machines.
+
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
- depends on SMP
+ depends on SMP || SPL_SMP
default 8
help
On multiprocessor machines, U-Boot sets up a stack for each CPU.
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index ecf0482635..fce098272f 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -53,7 +53,7 @@ _start:
/* mask all interrupts */
csrw MODE_PREFIX(ie), zero
-#ifdef CONFIG_SMP
+#if CONFIG_IS_ENABLED(SMP)
/* check if hart is within range */
/* tp: hart id */
li t0, CONFIG_NR_CPUS
@@ -91,7 +91,7 @@ call_board_init_f_0:
mv gp, a0
/* setup stack */
-#ifdef CONFIG_SMP
+#if CONFIG_IS_ENABLED(SMP)
/* tp: hart id */
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
sub sp, a0, t0
@@ -182,7 +182,7 @@ spl_stack_gd_setup:
mv s0, a0
/* setup stack on main hart */
-#ifdef CONFIG_SMP
+#if CONFIG_IS_ENABLED(SMP)
/* tp: hart id */
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
sub sp, s0, t0
@@ -231,7 +231,7 @@ relocate_code:
*Set up the stack
*/
stack_setup:
-#ifdef CONFIG_SMP
+#if CONFIG_IS_ENABLED(SMP)
/* tp: hart id */
slli t0, tp, CONFIG_STACK_SIZE_SHIFT
sub sp, s2, t0
@@ -326,7 +326,7 @@ clbss_l:
blt t0, t1, clbss_l
relocate_secondary_harts:
-#ifdef CONFIG_SMP
+#if CONFIG_IS_ENABLED(SMP)
/* send relocation IPI */
la t0, secondary_hart_relocate
add a0, t0, t6
@@ -370,7 +370,7 @@ call_board_init_r:
*/
jr t4 /* jump to board_init_r() */
-#ifdef CONFIG_SMP
+#if CONFIG_IS_ENABLED(SMP)
hart_out_of_bounds_loop:
/* Harts in this loop are out of bounds, increase CONFIG_NR_CPUS. */
wfi
@@ -393,7 +393,7 @@ secondary_hart_relocate:
secondary_hart_loop:
wfi
-#ifdef CONFIG_SMP
+#if CONFIG_IS_ENABLED(SMP)
csrr t0, MODE_PREFIX(ip)
#if CONFIG_IS_ENABLED(RISCV_MMODE)
andi t0, t0, MIE_MSIE
diff --git a/arch/riscv/include/asm/global_data.h b/arch/riscv/include/asm/global_data.h
index b74bd7e738..72fb4b4d92 100644
--- a/arch/riscv/include/asm/global_data.h
+++ b/arch/riscv/include/asm/global_data.h
@@ -24,7 +24,7 @@ struct arch_global_data {
#ifdef CONFIG_ANDES_PLMT
void __iomem *plmt; /* plmt base address */
#endif
-#ifdef CONFIG_SMP
+#if CONFIG_IS_ENABLED(SMP)
struct ipi_data ipi[CONFIG_NR_CPUS];
#endif
#ifndef CONFIG_XIP
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index adadbf4bcb..bd7b2c4d16 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -22,7 +22,7 @@ endif
obj-y += interrupts.o
obj-y += reset.o
obj-y += setjmp.o
-obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_$(SPL_)SMP) += smp.o
obj-$(CONFIG_SPL_BUILD) += spl.o
# For building EFI apps
diff --git a/arch/riscv/lib/spl.c b/arch/riscv/lib/spl.c
index ae07bbe40a..4ca038b148 100644
--- a/arch/riscv/lib/spl.c
+++ b/arch/riscv/lib/spl.c
@@ -41,7 +41,7 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
invalidate_icache_all();
debug("image entry point: 0x%lX\n", spl_image->entry_point);
-#ifdef CONFIG_SMP
+#ifdef CONFIG_SPL_SMP
ret = smp_call_function(spl_image->entry_point, (ulong)fdt_blob, 0, 0);
if (ret)
hang();
diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c
index a136073fdb..3519c34299 100644
--- a/common/spl/spl_opensbi.c
+++ b/common/spl/spl_opensbi.c
@@ -76,7 +76,7 @@ void spl_invoke_opensbi(struct spl_image_info *spl_image)
opensbi_entry = (void (*)(ulong, ulong, ulong))spl_image->entry_point;
invalidate_icache_all();
-#ifdef CONFIG_SMP
+#ifdef CONFIG_SPL_SMP
/*
* Start OpenSBI on all secondary harts and wait for acknowledgment.
*