summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/dts/imx53-ppd-uboot.dtsi20
-rw-r--r--arch/arm/dts/imx53-ppd.dts2
-rw-r--r--board/ge/bx50v3/Kconfig2
-rw-r--r--board/ge/bx50v3/bx50v3.c114
-rw-r--r--board/ge/common/Kconfig14
-rw-r--r--board/ge/common/ge_common.c17
-rw-r--r--board/ge/common/vpd_reader.c37
-rw-r--r--board/ge/mx53ppd/Kconfig2
-rw-r--r--board/ge/mx53ppd/mx53ppd.c35
-rw-r--r--board/ge/mx53ppd/mx53ppd_video.c1
-rw-r--r--configs/ge_bx50v3_defconfig15
-rw-r--r--configs/mx53ppd_defconfig12
-rw-r--r--include/configs/ge_bx50v3.h27
-rw-r--r--include/configs/mx53ppd.h35
14 files changed, 97 insertions, 236 deletions
diff --git a/arch/arm/dts/imx53-ppd-uboot.dtsi b/arch/arm/dts/imx53-ppd-uboot.dtsi
index 99d409db35..8e45ee7679 100644
--- a/arch/arm/dts/imx53-ppd-uboot.dtsi
+++ b/arch/arm/dts/imx53-ppd-uboot.dtsi
@@ -26,3 +26,23 @@
};
};
};
+
+&gpio1 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio2 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio4 {
+ u-boot,dm-pre-reloc;
+};
+
+&gpio5 {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/imx53-ppd.dts b/arch/arm/dts/imx53-ppd.dts
index 016a859e3f..a6278476d3 100644
--- a/arch/arm/dts/imx53-ppd.dts
+++ b/arch/arm/dts/imx53-ppd.dts
@@ -489,7 +489,7 @@
reg = <1>;
rtc@30 {
- compatible = "sii,s35390a";
+ compatible = "sii,s35392a-rtc";
reg = <0x30>;
};
diff --git a/board/ge/bx50v3/Kconfig b/board/ge/bx50v3/Kconfig
index 05938560ab..993b055930 100644
--- a/board/ge/bx50v3/Kconfig
+++ b/board/ge/bx50v3/Kconfig
@@ -15,6 +15,4 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "ge_bx50v3"
-source "board/ge/common/Kconfig"
-
endif
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 89607cf056..4a75c7b279 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -14,7 +14,6 @@
#include <linux/errno.h>
#include <linux/libfdt.h>
#include <asm/gpio.h>
-#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/video.h>
@@ -27,7 +26,8 @@
#include <asm/arch/crm_regs.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
-#include <i2c.h>
+#include <power/regulator.h>
+#include <power/da9063_pmic.h>
#include <input.h>
#include <pwm.h>
#include <version.h>
@@ -85,45 +85,6 @@ static iomux_v3_cfg_t const uart4_pads[] = {
MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-static struct i2c_pads_info i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | I2C_PAD,
- .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | I2C_PAD,
- .gp = IMX_GPIO_NR(5, 27)
- },
- .sda = {
- .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | I2C_PAD,
- .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | I2C_PAD,
- .gp = IMX_GPIO_NR(5, 26)
- }
-};
-
-static struct i2c_pads_info i2c_pad_info2 = {
- .scl = {
- .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
- .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
- .gp = IMX_GPIO_NR(4, 12)
- },
- .sda = {
- .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
- .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
- .gp = IMX_GPIO_NR(4, 13)
- }
-};
-
-static struct i2c_pads_info i2c_pad_info3 = {
- .scl = {
- .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | I2C_PAD,
- .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | I2C_PAD,
- .gp = IMX_GPIO_NR(1, 3)
- },
- .sda = {
- .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | I2C_PAD,
- .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | I2C_PAD,
- .gp = IMX_GPIO_NR(1, 6)
- }
-};
-
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
@@ -491,10 +452,6 @@ static void set_confidx(const struct vpd_cache* vpd)
int board_init(void)
{
- setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
- setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
-
if (!read_vpd(&vpd, vpd_callback)) {
int ret, rescan;
@@ -541,53 +498,26 @@ static const struct boot_mode board_boot_modes[] = {
void pmic_init(void)
{
-#define I2C_PMIC 0x2
-#define DA9063_I2C_ADDR 0x58
-#define DA9063_REG_BCORE2_CFG 0x9D
-#define DA9063_REG_BCORE1_CFG 0x9E
-#define DA9063_REG_BPRO_CFG 0x9F
-#define DA9063_REG_BIO_CFG 0xA0
-#define DA9063_REG_BMEM_CFG 0xA1
-#define DA9063_REG_BPERI_CFG 0xA2
-#define DA9063_BUCK_MODE_MASK 0xC0
-#define DA9063_BUCK_MODE_MANUAL 0x00
-#define DA9063_BUCK_MODE_SLEEP 0x40
-#define DA9063_BUCK_MODE_SYNC 0x80
-#define DA9063_BUCK_MODE_AUTO 0xC0
-
- uchar val;
-
- i2c_set_bus_num(I2C_PMIC);
-
- i2c_read(DA9063_I2C_ADDR, DA9063_REG_BCORE2_CFG, 1, &val, 1);
- val &= ~DA9063_BUCK_MODE_MASK;
- val |= DA9063_BUCK_MODE_SYNC;
- i2c_write(DA9063_I2C_ADDR, DA9063_REG_BCORE2_CFG, 1, &val, 1);
-
- i2c_read(DA9063_I2C_ADDR, DA9063_REG_BCORE1_CFG, 1, &val, 1);
- val &= ~DA9063_BUCK_MODE_MASK;
- val |= DA9063_BUCK_MODE_SYNC;
- i2c_write(DA9063_I2C_ADDR, DA9063_REG_BCORE1_CFG, 1, &val, 1);
-
- i2c_read(DA9063_I2C_ADDR, DA9063_REG_BPRO_CFG, 1, &val, 1);
- val &= ~DA9063_BUCK_MODE_MASK;
- val |= DA9063_BUCK_MODE_SYNC;
- i2c_write(DA9063_I2C_ADDR, DA9063_REG_BPRO_CFG, 1, &val, 1);
-
- i2c_read(DA9063_I2C_ADDR, DA9063_REG_BIO_CFG, 1, &val, 1);
- val &= ~DA9063_BUCK_MODE_MASK;
- val |= DA9063_BUCK_MODE_SYNC;
- i2c_write(DA9063_I2C_ADDR, DA9063_REG_BIO_CFG, 1, &val, 1);
-
- i2c_read(DA9063_I2C_ADDR, DA9063_REG_BMEM_CFG, 1, &val, 1);
- val &= ~DA9063_BUCK_MODE_MASK;
- val |= DA9063_BUCK_MODE_SYNC;
- i2c_write(DA9063_I2C_ADDR, DA9063_REG_BMEM_CFG, 1, &val, 1);
-
- i2c_read(DA9063_I2C_ADDR, DA9063_REG_BPERI_CFG, 1, &val, 1);
- val &= ~DA9063_BUCK_MODE_MASK;
- val |= DA9063_BUCK_MODE_SYNC;
- i2c_write(DA9063_I2C_ADDR, DA9063_REG_BPERI_CFG, 1, &val, 1);
+ struct udevice *reg;
+ int ret, i;
+ static const char * const bucks[] = {
+ "bcore1",
+ "bcore2",
+ "bpro",
+ "bmem",
+ "bio",
+ "bperi",
+ };
+
+ for (i = 0; i < ARRAY_SIZE(bucks); i++) {
+ ret = regulator_get_by_devname(bucks[i], &reg);
+ if (reg < 0) {
+ printf("%s(): Unable to get regulator %s: %d\n",
+ __func__, bucks[i], ret);
+ continue;
+ }
+ regulator_set_mode(reg, DA9063_BUCKMODE_SYNC);
+ }
}
int board_late_init(void)
diff --git a/board/ge/common/Kconfig b/board/ge/common/Kconfig
deleted file mode 100644
index 637b264954..0000000000
--- a/board/ge/common/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-config SYS_VPD_EEPROM_I2C_ADDR
- hex "I2C address of the EEPROM device used for VPD"
- help
- VPD = Vital Product Data
-
-config SYS_VPD_EEPROM_I2C_BUS
- int "I2C bus of the EEPROM device used for VPD."
-
-config SYS_VPD_EEPROM_SIZE
- int "Size in bytes of the EEPROM device used for VPD"
-
-config SYS_VPD_EEPROM_I2C_ADDR_LEN
- int "Number of bytes to use for VPD EEPROM address"
- default 1
diff --git a/board/ge/common/ge_common.c b/board/ge/common/ge_common.c
index d7e21deca7..48c3778046 100644
--- a/board/ge/common/ge_common.c
+++ b/board/ge/common/ge_common.c
@@ -5,27 +5,24 @@
#include <common.h>
#include <env.h>
-#include <i2c.h>
+#include <dm/uclass.h>
#include <rtc.h>
void check_time(void)
{
+ struct udevice *dev;
int ret, i;
struct rtc_time tm;
u8 retry = 3;
- unsigned int current_i2c_bus = i2c_get_bus_num();
-
- ret = i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
- if (ret < 0) {
+ ret = uclass_get_device(UCLASS_RTC, 0, &dev);
+ if (ret) {
env_set("rtc_status", "FAIL");
return;
}
- rtc_init();
-
for (i = 0; i < retry; i++) {
- ret = rtc_get(&tm);
+ ret = dm_rtc_get(dev, &tm);
if (!ret || ret == -EINVAL)
break;
}
@@ -40,7 +37,7 @@ void check_time(void)
tm.tm_year = 2036;
for (i = 0; i < retry; i++) {
- ret = rtc_set(&tm);
+ ret = dm_rtc_set(dev, &tm);
if (!ret)
break;
}
@@ -55,7 +52,5 @@ void check_time(void)
env_set("rtc_status", "2038");
else
env_set("rtc_status", "OK");
-
- i2c_set_bus_num(current_i2c_bus);
}
diff --git a/board/ge/common/vpd_reader.c b/board/ge/common/vpd_reader.c
index 12410d9b71..4df411cf10 100644
--- a/board/ge/common/vpd_reader.c
+++ b/board/ge/common/vpd_reader.c
@@ -8,6 +8,9 @@
#include <i2c.h>
#include <linux/bch.h>
#include <stdlib.h>
+#include <dm/uclass.h>
+#include <i2c_eeprom.h>
+#include <hexdump.h>
/* BCH configuration */
@@ -200,28 +203,34 @@ int read_vpd(struct vpd_cache *cache,
int (*process_block)(struct vpd_cache *, u8 id, u8 version,
u8 type, size_t size, u8 const *data))
{
- static const size_t size = CONFIG_SYS_VPD_EEPROM_SIZE;
-
- int res;
+ struct udevice *dev;
+ int ret;
u8 *data;
- unsigned int current_i2c_bus = i2c_get_bus_num();
+ int size;
+
+ ret = uclass_get_device_by_name(UCLASS_I2C_EEPROM, "vpd", &dev);
+ if (ret)
+ return ret;
- res = i2c_set_bus_num(CONFIG_SYS_VPD_EEPROM_I2C_BUS);
- if (res < 0)
- return res;
+ size = i2c_eeprom_size(dev);
+ if (size < 0) {
+ printf("Unable to get size of eeprom: %d\n", ret);
+ return ret;
+ }
data = malloc(size);
if (!data)
return -ENOMEM;
- res = i2c_read(CONFIG_SYS_VPD_EEPROM_I2C_ADDR, 0,
- CONFIG_SYS_VPD_EEPROM_I2C_ADDR_LEN,
- data, size);
- if (res == 0)
- res = vpd_reader(size, data, cache, process_block);
+ ret = i2c_eeprom_read(dev, 0, data, size);
+ if (ret) {
+ free(data);
+ return ret;
+ }
+
+ ret = vpd_reader(size, data, cache, process_block);
free(data);
- i2c_set_bus_num(current_i2c_bus);
- return res;
+ return ret;
}
diff --git a/board/ge/mx53ppd/Kconfig b/board/ge/mx53ppd/Kconfig
index bebb2fab01..6dc3818cb7 100644
--- a/board/ge/mx53ppd/Kconfig
+++ b/board/ge/mx53ppd/Kconfig
@@ -13,6 +13,4 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "mx53ppd"
-source "board/ge/common/Kconfig"
-
endif
diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c
index 105edd24cb..ea3f2170b6 100644
--- a/board/ge/mx53ppd/mx53ppd.c
+++ b/board/ge/mx53ppd/mx53ppd.c
@@ -125,34 +125,6 @@ static void setup_iomux_fec(void)
imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}
-#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
- static const iomux_v3_cfg_t i2c1_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL),
- };
-
- imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads));
-}
-
-#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
-
-static struct i2c_pads_info i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX53_PAD_EIM_D21__I2C1_SCL | I2C_PAD,
- .gpio_mode = MX53_PAD_EIM_D28__GPIO3_28 | I2C_PAD,
- .gp = IMX_GPIO_NR(3, 28)
- },
- .sda = {
- .i2c_mode = MX53_PAD_EIM_D28__I2C1_SDA | I2C_PAD,
- .gpio_mode = MX53_PAD_EIM_D21__GPIO3_21 | I2C_PAD,
- .gp = IMX_GPIO_NR(3, 21)
- }
-};
-
static int clock_1GHz(void)
{
int ret;
@@ -182,8 +154,10 @@ void ppd_gpio_init(void)
int i;
imx_iomux_v3_setup_multiple_pads(ppd_pads, ARRAY_SIZE(ppd_pads));
- for (i = 0; i < ARRAY_SIZE(ppd_gpios); ++i)
+ for (i = 0; i < ARRAY_SIZE(ppd_gpios); ++i) {
+ gpio_request(ppd_gpios[i].gpio, "request");
gpio_direction_output(ppd_gpios[i].gpio, ppd_gpios[i].value);
+ }
}
int board_early_init_f(void)
@@ -256,9 +230,6 @@ int board_init(void)
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
mxc_set_sata_internal_clock();
- setup_iomux_i2c();
-
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
return 0;
}
diff --git a/board/ge/mx53ppd/mx53ppd_video.c b/board/ge/mx53ppd/mx53ppd_video.c
index 394dcd6801..9dd9f0c98d 100644
--- a/board/ge/mx53ppd/mx53ppd_video.c
+++ b/board/ge/mx53ppd/mx53ppd_video.c
@@ -104,6 +104,7 @@ static void lcd_enable(void)
pwm_config(1, 5000000, 5000000);
/* Backlight Power */
+ gpio_request(BACKLIGHT_ENABLE, "BACKLIGHT_ENABLE");
gpio_direction_output(BACKLIGHT_ENABLE, 1);
pwm_enable(1);
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index 33579ce8c2..746bc25742 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -2,9 +2,6 @@ CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17800000
CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
-CONFIG_SYS_VPD_EEPROM_I2C_BUS=4
-CONFIG_SYS_VPD_EEPROM_SIZE=1024
CONFIG_TARGET_GE_BX50V3=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x10000
@@ -51,6 +48,12 @@ CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_EXT=y
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
CONFIG_DM_MMC=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_MTD=y
@@ -71,6 +74,12 @@ CONFIG_DM_PCI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_PWM_IMX=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_DA9063=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_DA9063=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_RX8010SJ=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MXC_SPI=y
diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig
index b0d3f50aad..55889ee127 100644
--- a/configs/mx53ppd_defconfig
+++ b/configs/mx53ppd_defconfig
@@ -2,9 +2,6 @@ CONFIG_ARM=y
CONFIG_ARCH_MX5=y
CONFIG_SYS_TEXT_BASE=0x77800000
CONFIG_TARGET_MX53PPD=y
-CONFIG_SYS_VPD_EEPROM_I2C_ADDR=0x50
-CONFIG_SYS_VPD_EEPROM_I2C_BUS=2
-CONFIG_SYS_VPD_EEPROM_SIZE=1024
CONFIG_ENV_SIZE=0x2800
CONFIG_ENV_OFFSET=0xC0000
CONFIG_BOOTCOUNT_BOOTLIMIT=10
@@ -41,6 +38,13 @@ CONFIG_DM=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_EXT=y
CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="0:5"
+CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
CONFIG_DM_MMC=y
CONFIG_FSL_ESDHC_IMX=y
CONFIG_MTD=y
@@ -49,6 +53,7 @@ CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX5=y
CONFIG_DM_REGULATOR=y
CONFIG_PWM_IMX=y
+CONFIG_DM_RTC=y
CONFIG_RTC_S35392A=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_WATCHDOG=y
@@ -60,3 +65,4 @@ CONFIG_VIDEO=y
# CONFIG_VIDEO_SW_CURSOR is not set
CONFIG_WATCHDOG_TIMEOUT_MSECS=8000
CONFIG_IMX_WATCHDOG=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index dad906d494..b8b1ec704e 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -189,33 +189,6 @@
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
-#define CONFIG_RTC_RX8010SJ
-#define CONFIG_SYS_RTC_BUS_NUM 2
-#define CONFIG_SYS_I2C_RTC_ADDR 0x32
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_MXC_I2C1
-#define CONFIG_SYS_I2C_MXC_I2C2
-#define CONFIG_SYS_I2C_MXC_I2C3
-
-#define CONFIG_SYS_NUM_I2C_BUSES 11
-#define CONFIG_SYS_I2C_MAX_HOPS 1
-#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
- {1, {I2C_NULL_HOP} }, \
- {2, {I2C_NULL_HOP} }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
- }
-
#define CONFIG_BCH
#endif /* __GE_BX50V3_CONFIG_H */
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index 9361507a55..a11b085db8 100644
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -43,25 +43,6 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_SYS_RTC_BUS_NUM 2
-#define CONFIG_SYS_I2C_RTC_ADDR 0x30
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-
-/* PMIC Controller */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_DIALOG_POWER
-#define CONFIG_POWER_FSL
-#define CONFIG_POWER_FSL_MC13892
-#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
-#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
-
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
@@ -188,22 +169,6 @@
#define CONFIG_CMD_FUSE
#define CONFIG_FSL_IIM
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* I2C1 */
-#define CONFIG_SYS_NUM_I2C_BUSES 9
-#define CONFIG_SYS_I2C_MAX_HOPS 1
-#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
- }
-
#define CONFIG_BCH
/* Backlight Control */
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-29 03:41:40 +0300