diff options
-rw-r--r-- | drivers/i2c/sandbox_i2c.c | 11 | ||||
-rw-r--r-- | drivers/rtc/sandbox_rtc.c | 13 | ||||
-rw-r--r-- | include/acpi/acpi_device.h | 33 | ||||
-rw-r--r-- | lib/acpi/acpi_device.c | 107 | ||||
-rw-r--r-- | test/dm/acpigen.c | 32 |
5 files changed, 196 insertions, 0 deletions
diff --git a/drivers/i2c/sandbox_i2c.c b/drivers/i2c/sandbox_i2c.c index f4ae2397a0..125026da90 100644 --- a/drivers/i2c/sandbox_i2c.c +++ b/drivers/i2c/sandbox_i2c.c @@ -11,6 +11,7 @@ #include <i2c.h> #include <log.h> #include <asm/test.h> +#include <dm/acpi.h> #include <dm/lists.h> #include <dm/device-internal.h> @@ -83,6 +84,15 @@ static int sandbox_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, return ops->xfer(emul, msg, nmsgs); } +static int sandbox_i2c_get_name(const struct udevice *dev, char *out_name) +{ + return acpi_copy_name(out_name, "SI2C"); +} + +struct acpi_ops sandbox_i2c_acpi_ops = { + .get_name = sandbox_i2c_get_name, +}; + static const struct dm_i2c_ops sandbox_i2c_ops = { .xfer = sandbox_i2c_xfer, }; @@ -98,4 +108,5 @@ U_BOOT_DRIVER(i2c_sandbox) = { .of_match = sandbox_i2c_ids, .ops = &sandbox_i2c_ops, .priv_auto_alloc_size = sizeof(struct sandbox_i2c_priv), + ACPI_OPS_PTR(&sandbox_i2c_acpi_ops) }; diff --git a/drivers/rtc/sandbox_rtc.c b/drivers/rtc/sandbox_rtc.c index 77065e49c7..852770a49c 100644 --- a/drivers/rtc/sandbox_rtc.c +++ b/drivers/rtc/sandbox_rtc.c @@ -9,6 +9,7 @@ #include <i2c.h> #include <rtc.h> #include <asm/rtc.h> +#include <dm/acpi.h> #define REG_COUNT 0x80 @@ -67,6 +68,17 @@ static int sandbox_rtc_write8(struct udevice *dev, unsigned int reg, int val) return dm_i2c_reg_write(dev, reg, val); } +#if CONFIG_IS_ENABLED(ACPIGEN) +static int sandbox_rtc_get_name(const struct udevice *dev, char *out_name) +{ + return acpi_copy_name(out_name, "RTCC"); +} + +struct acpi_ops sandbox_rtc_acpi_ops = { + .get_name = sandbox_rtc_get_name, +}; +#endif + static const struct rtc_ops sandbox_rtc_ops = { .get = sandbox_rtc_get, .set = sandbox_rtc_set, @@ -85,4 +97,5 @@ U_BOOT_DRIVER(rtc_sandbox) = { .id = UCLASS_RTC, .of_match = sandbox_rtc_ids, .ops = &sandbox_rtc_ops, + ACPI_OPS_PTR(&sandbox_rtc_acpi_ops) }; diff --git a/include/acpi/acpi_device.h b/include/acpi/acpi_device.h index 67a242eb75..7a65dadbb2 100644 --- a/include/acpi/acpi_device.h +++ b/include/acpi/acpi_device.h @@ -9,6 +9,7 @@ #ifndef __ACPI_DEVICE_H #define __ACPI_DEVICE_H +#include <i2c.h> #include <linux/bitops.h> struct acpi_ctx; @@ -183,6 +184,26 @@ struct acpi_gpio { enum acpi_gpio_polarity polarity; }; +/* ACPI Descriptors for Serial Bus interfaces */ +#define ACPI_SERIAL_BUS_TYPE_I2C 1 +#define ACPI_I2C_SERIAL_BUS_REVISION_ID 1 /* TODO: upgrade to 2 */ +#define ACPI_I2C_TYPE_SPECIFIC_REVISION_ID 1 + +/** + * struct acpi_i2c - representation of an ACPI I2C device + * + * @address: 7-bit or 10-bit I2C address + * @mode_10bit: Which address size is used + * @speed: Bus speed in Hz + * @resource: Resource name for the I2C controller + */ +struct acpi_i2c { + u16 address; + enum i2c_address_mode mode_10bit; + enum i2c_speed_rate speed; + const char *resource; +}; + /** * acpi_device_path() - Get the full path to an ACPI device * @@ -270,4 +291,16 @@ int acpi_device_write_gpio_desc(struct acpi_ctx *ctx, int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx, struct udevice *dev, const char *prop); +/** + * acpi_device_write_i2c_dev() - Write an I2C device to ACPI + * + * This creates a I2cSerialBus descriptor for an I2C device, including + * information ACPI needs to use it. + * + * @ctx: ACPI context pointer + * @dev: I2C device to write + * @return I2C address of device if OK, -ve on error + */ +int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev); + #endif diff --git a/lib/acpi/acpi_device.c b/lib/acpi/acpi_device.c index c93af2e583..c0d5a9acae 100644 --- a/lib/acpi/acpi_device.c +++ b/lib/acpi/acpi_device.c @@ -385,3 +385,110 @@ int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx, return pin; } + +/* ACPI 6.3 section 6.4.3.8.2.1 - I2cSerialBus() */ +static void acpi_device_write_i2c(struct acpi_ctx *ctx, + const struct acpi_i2c *i2c) +{ + void *desc_length, *type_length; + + /* Byte 0: Descriptor Type */ + acpigen_emit_byte(ctx, ACPI_DESCRIPTOR_SERIAL_BUS); + + /* Byte 1+2: Length (filled in later) */ + desc_length = largeres_write_len_f(ctx); + + /* Byte 3: Revision ID */ + acpigen_emit_byte(ctx, ACPI_I2C_SERIAL_BUS_REVISION_ID); + + /* Byte 4: Resource Source Index is Reserved */ + acpigen_emit_byte(ctx, 0); + + /* Byte 5: Serial Bus Type is I2C */ + acpigen_emit_byte(ctx, ACPI_SERIAL_BUS_TYPE_I2C); + + /* + * Byte 6: Flags + * [7:2]: 0 => Reserved + * [1]: 1 => ResourceConsumer + * [0]: 0 => ControllerInitiated + */ + acpigen_emit_byte(ctx, 1 << 1); + + /* + * Byte 7-8: Type Specific Flags + * [15:1]: 0 => Reserved + * [0]: 0 => 7bit, 1 => 10bit + */ + acpigen_emit_word(ctx, i2c->mode_10bit); + + /* Byte 9: Type Specific Revision ID */ + acpigen_emit_byte(ctx, ACPI_I2C_TYPE_SPECIFIC_REVISION_ID); + + /* Byte 10-11: I2C Type Data Length */ + type_length = largeres_write_len_f(ctx); + + /* Byte 12-15: I2C Bus Speed */ + acpigen_emit_dword(ctx, i2c->speed); + + /* Byte 16-17: I2C Slave Address */ + acpigen_emit_word(ctx, i2c->address); + + /* Fill in Type Data Length */ + largeres_fill_len(ctx, type_length); + + /* Byte 18+: ResourceSource */ + acpigen_emit_string(ctx, i2c->resource); + + /* Fill in I2C Descriptor Length */ + largeres_fill_len(ctx, desc_length); +} + +/** + * acpi_device_set_i2c() - Set up an ACPI I2C struct from a device + * + * The value of @scope is not copied, but only referenced. This implies the + * caller has to ensure it stays valid for the lifetime of @i2c. + * + * @dev: I2C device to convert + * @i2c: Place to put the new structure + * @scope: Scope of the I2C device (this is the controller path) + * @return chip address of device + */ +static int acpi_device_set_i2c(const struct udevice *dev, struct acpi_i2c *i2c, + const char *scope) +{ + struct dm_i2c_chip *chip = dev_get_parent_platdata(dev); + struct udevice *bus = dev_get_parent(dev); + + memset(i2c, '\0', sizeof(*i2c)); + i2c->address = chip->chip_addr; + i2c->mode_10bit = 0; + + /* + * i2c_bus->speed_hz is set if this device is probed, but if not we + * must use the device tree + */ + i2c->speed = dev_read_u32_default(bus, "clock-frequency", + I2C_SPEED_STANDARD_RATE); + i2c->resource = scope; + + return i2c->address; +} + +int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev) +{ + char scope[ACPI_PATH_MAX]; + struct acpi_i2c i2c; + int ret; + + ret = acpi_device_scope(dev, scope, sizeof(scope)); + if (ret) + return log_msg_ret("scope", ret); + ret = acpi_device_set_i2c(dev, &i2c, scope); + if (ret < 0) + return log_msg_ret("set", ret); + acpi_device_write_i2c(ctx, &i2c); + + return ret; +} diff --git a/test/dm/acpigen.c b/test/dm/acpigen.c index 7d81652295..c210ceb404 100644 --- a/test/dm/acpigen.c +++ b/test/dm/acpigen.c @@ -276,3 +276,35 @@ static int dm_test_acpi_interrupt_or_gpio(struct unit_test_state *uts) } DM_TEST(dm_test_acpi_interrupt_or_gpio, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test emitting an I2C descriptor */ +static int dm_test_acpi_i2c(struct unit_test_state *uts) +{ + struct acpi_ctx *ctx; + struct udevice *dev; + u8 *ptr; + + ut_assertok(alloc_context(&ctx)); + + ptr = acpigen_get_current(ctx); + + ut_assertok(uclass_get_device(UCLASS_RTC, 0, &dev)); + ut_asserteq(0x43, acpi_device_write_i2c_dev(ctx, dev)); + ut_asserteq(28, acpigen_get_current(ctx) - ptr); + ut_asserteq(ACPI_DESCRIPTOR_SERIAL_BUS, ptr[0]); + ut_asserteq(25, get_unaligned((u16 *)(ptr + 1))); + ut_asserteq(ACPI_I2C_SERIAL_BUS_REVISION_ID, ptr[3]); + ut_asserteq(0, ptr[4]); + ut_asserteq(ACPI_SERIAL_BUS_TYPE_I2C, ptr[5]); + ut_asserteq(0, get_unaligned((u16 *)(ptr + 7))); + ut_asserteq(ACPI_I2C_TYPE_SPECIFIC_REVISION_ID, ptr[9]); + ut_asserteq(6, get_unaligned((u16 *)(ptr + 10))); + ut_asserteq(100000, get_unaligned((u32 *)(ptr + 12))); + ut_asserteq(0x43, get_unaligned((u16 *)(ptr + 16))); + ut_asserteq_str("\\_SB.I2C0", (char *)ptr + 18); + + free_context(&ctx); + + return 0; +} +DM_TEST(dm_test_acpi_i2c, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); |