summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/dts/Makefile4
-rw-r--r--arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi41
-rw-r--r--arch/arm/dts/sun50i-a64-teres-i.dts270
-rw-r--r--arch/arm/dts/sun50i-h6-beelink-gs1.dts184
-rw-r--r--board/sunxi/MAINTAINERS12
-rw-r--r--configs/Cubietruck_plus_defconfig2
-rw-r--r--configs/Sinovoip_BPI_M3_defconfig4
-rw-r--r--configs/beelink_gs1_defconfig15
-rw-r--r--configs/teres_i_defconfig22
-rw-r--r--drivers/clk/clk-uclass.c75
-rw-r--r--drivers/clk/sifive/fu540-prci.c2
-rw-r--r--drivers/net/sun8i_emac.c74
-rw-r--r--drivers/reset/reset-uclass.c53
-rw-r--r--drivers/serial/serial_sifive.c2
-rw-r--r--drivers/spi/atcspi200_spi.c2
-rw-r--r--include/clk.h15
-rw-r--r--include/configs/sunxi-common.h16
-rw-r--r--include/reset.h16
-rw-r--r--test/dm/clk.c21
-rw-r--r--test/dm/reset.c23
20 files changed, 794 insertions, 59 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a199f3f988..8b971434eb 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -480,6 +480,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-orangepi-prime.dtb \
sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_MACH_SUN50I_H6) += \
+ sun50i-h6-beelink-gs1.dtb \
sun50i-h6-orangepi-lite2.dtb \
sun50i-h6-orangepi-one-plus.dtb \
sun50i-h6-pine-h64.dtb
@@ -494,7 +495,8 @@ dtb-$(CONFIG_MACH_SUN50I) += \
sun50i-a64-pine64-plus.dtb \
sun50i-a64-pine64.dtb \
sun50i-a64-pinebook.dtb \
- sun50i-a64-sopine-baseboard.dtb
+ sun50i-a64-sopine-baseboard.dtb \
+ sun50i-a64-teres-i.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb \
diff --git a/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi b/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
new file mode 100644
index 0000000000..1a64b7d09c
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ */
+
+#include "sunxi-u-boot.dtsi"
+
+/ {
+ vdd_bl: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "bl-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ enable-active-high;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 50000 0>;
+ brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
+ default-brightness-level = <2>;
+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+ power-supply = <&vdd_bl>;
+ };
+};
+
+/* The ANX6345 eDP-bridge is on i2c */
+&i2c0 {
+ anx6345: edp-bridge@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ status = "okay";
+ };
+};
+
+&pwm {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts
new file mode 100644
index 0000000000..c455b24dd0
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-teres-i.dts
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) Harald Geyer <harald@ccbib.org>
+ * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Olimex A64 Teres-I";
+ compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+
+ framebuffer-lcd {
+ eDP25-supply = <&reg_dldo2>;
+ eDP12-supply = <&reg_dldo3>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ lid-switch {
+ label = "Lid Switch";
+ gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ capslock {
+ label = "teres-i:green:capslock";
+ gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+ };
+
+ numlock {
+ label = "teres-i:green:numlock";
+ gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+ status = "okay";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+
+/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline)
+ * driver for this chip at the moment, the bootloader initializes it.
+ * However it can be accessed with the i2c-dev driver from user space.
+ */
+&i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&reg_aldo2>;
+ vqmmc-supply = <&reg_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8723bs: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&reg_dcdc1>;
+ vqmmc-supply = <&reg_dcdc1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&r_rsb {
+ status = "okay";
+
+ axp803: pmic@3a3 {
+ compatible = "x-powers,axp803";
+ reg = <0x3a3>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+ };
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1040000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+ regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vcc-ddr3";
+};
+
+&reg_dcdc6 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vcc-pd";
+};
+
+&reg_dldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd-edp";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dvdd-csi";
+};
+
+&reg_fldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+ regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+ vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
new file mode 100644
index 0000000000..54b0882bed
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Beelink GS1";
+ compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "beelink:white:power";
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ default-state = "on";
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC jack */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <&reg_cldo1>;
+ vqmmc-supply = <&reg_bldo2>;
+ non-removable;
+ cap-mmc-hw-reset;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp805: pmic@36 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x36>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+ vina-supply = <&reg_vcc5v>;
+ vinb-supply = <&reg_vcc5v>;
+ vinc-supply = <&reg_vcc5v>;
+ vind-supply = <&reg_vcc5v>;
+ vine-supply = <&reg_vcc5v>;
+ aldoin-supply = <&reg_vcc5v>;
+ bldoin-supply = <&reg_vcc5v>;
+ cldoin-supply = <&reg_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-ac200";
+ regulator-enable-ramp-delay = <100000>;
+ };
+
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc25-dram";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-io";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dcxoio";
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+ };
+
+ reg_cldo2: cldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <960000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 338f374e56..bdd1854197 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -166,6 +166,12 @@ M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/bananapi_m64_defconfig
+BEELINK GS1
+M: Clément Péron <peron.clem@gmail.com>
+S: Maintained
+F: configs/beelink_gs1_defconfig
+F: arch/arm/dts/sun50i-h6-beelink-gs1.dts
+
COLOMBUS BOARD
M: Maxime Ripard <maxime.ripard@bootlin.com>
S: Maintained
@@ -352,6 +358,12 @@ S: Maintained
F: configs/A20-Olimex-SOM204-EVB_defconfig
F: configs/A20-Olimex-SOM204-EVB-eMMC_defconfig
+OLIMEX TERES-I BOARD
+M: Jonas Smedegaard <dr@jones.dk>
+M: Icenowy Zheng <icenowy@aosc.io>
+S: Maintained
+F: configs/teres_i_defconfig
+
ORANGEPI LITE2 BOARD
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig
index a45ca1680e..ef6a9d5d37 100644
--- a/configs/Cubietruck_plus_defconfig
+++ b/configs/Cubietruck_plus_defconfig
@@ -21,6 +21,8 @@ CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
+CONFIG_PHY_REALTEK=y
+CONFIG_SUN8I_EMAC=y
CONFIG_AXP_DLDO3_VOLT=2500
CONFIG_AXP_DLDO4_VOLT=3300
CONFIG_AXP_FLDO1_VOLT=1200
diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig
index b57e453420..5174e28723 100644
--- a/configs/Sinovoip_BPI_M3_defconfig
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -22,8 +22,10 @@ CONFIG_SPL_TEXT_BASE=0x60
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3"
+CONFIG_PHY_REALTEK=y
+CONFIG_SUN8I_EMAC=y
CONFIG_AXP_DCDC5_VOLT=1200
-CONFIG_AXP_DLDO3_VOLT=2500
+CONFIG_AXP_DLDO3_VOLT=3300
CONFIG_AXP_SW_ON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
new file mode 100644
index 0000000000..ef4dd29549
--- /dev/null
+++ b/configs/beelink_gs1_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H6=y
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+# CONFIG_PSCI_RESET is not set
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
diff --git a/configs/teres_i_defconfig b/configs/teres_i_defconfig
new file mode 100644
index 0000000000..421a8d3d40
--- /dev/null
+++ b/configs/teres_i_defconfig
@@ -0,0 +1,22 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I=y
+CONFIG_DRAM_CLK=552
+CONFIG_DRAM_ZQ=3881949
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_USB1_VBUS_PIN="PL7"
+CONFIG_I2C0_ENABLE=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-teres-i"
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_SUNXI=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+# CONFIG_USB_GADGET is not set
+CONFIG_VIDEO_BRIDGE=y
+CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index 844b87cc33..79b3b0494c 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -54,28 +54,20 @@ static int clk_of_xlate_default(struct clk *clk,
return 0;
}
-static int clk_get_by_indexed_prop(struct udevice *dev, const char *prop_name,
- int index, struct clk *clk)
+static int clk_get_by_index_tail(int ret, ofnode node,
+ struct ofnode_phandle_args *args,
+ const char *list_name, int index,
+ struct clk *clk)
{
- int ret;
- struct ofnode_phandle_args args;
struct udevice *dev_clk;
const struct clk_ops *ops;
- debug("%s(dev=%p, index=%d, clk=%p)\n", __func__, dev, index, clk);
-
assert(clk);
clk->dev = NULL;
+ if (ret)
+ goto err;
- ret = dev_read_phandle_with_args(dev, prop_name, "#clock-cells", 0,
- index, &args);
- if (ret) {
- debug("%s: fdtdec_parse_phandle_with_args failed: err=%d\n",
- __func__, ret);
- return ret;
- }
-
- ret = uclass_get_device_by_ofnode(UCLASS_CLK, args.node, &dev_clk);
+ ret = uclass_get_device_by_ofnode(UCLASS_CLK, args->node, &dev_clk);
if (ret) {
debug("%s: uclass_get_device_by_of_offset failed: err=%d\n",
__func__, ret);
@@ -87,20 +79,67 @@ static int clk_get_by_indexed_prop(struct udevice *dev, const char *prop_name,
ops = clk_dev_ops(dev_clk);
if (ops->of_xlate)
- ret = ops->of_xlate(clk, &args);
+ ret = ops->of_xlate(clk, args);
else
- ret = clk_of_xlate_default(clk, &args);
+ ret = clk_of_xlate_default(clk, args);
if (ret) {
debug("of_xlate() failed: %d\n", ret);
return ret;
}
return clk_request(dev_clk, clk);
+err:
+ debug("%s: Node '%s', property '%s', failed to request CLK index %d: %d\n",
+ __func__, ofnode_get_name(node), list_name, index, ret);
+ return ret;
+}
+
+static int clk_get_by_indexed_prop(struct udevice *dev, const char *prop_name,
+ int index, struct clk *clk)
+{
+ int ret;
+ struct ofnode_phandle_args args;
+
+ debug("%s(dev=%p, index=%d, clk=%p)\n", __func__, dev, index, clk);
+
+ assert(clk);
+ clk->dev = NULL;
+
+ ret = dev_read_phandle_with_args(dev, prop_name, "#clock-cells", 0,
+ index, &args);
+ if (ret) {
+ debug("%s: fdtdec_parse_phandle_with_args failed: err=%d\n",
+ __func__, ret);
+ return ret;
+ }
+
+
+ return clk_get_by_index_tail(ret, dev_ofnode(dev), &args, "clocks",
+ index > 0, clk);
}
int clk_get_by_index(struct udevice *dev, int index, struct clk *clk)
{
- return clk_get_by_indexed_prop(dev, "clocks", index, clk);
+ struct ofnode_phandle_args args;
+ int ret;
+
+ ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
+ index, &args);
+
+ return clk_get_by_index_tail(ret, dev_ofnode(dev), &args, "clocks",
+ index > 0, clk);
+}
+
+int clk_get_by_index_nodev(ofnode node, int index, struct clk *clk)
+{
+ struct ofnode_phandle_args args;
+ int ret;
+
+ ret = ofnode_parse_phandle_with_args(node, "clocks", "#clock-cells", 0,
+ index > 0, &args);
+
+ return clk_get_by_index_tail(ret, node, &args, "clocks",
+ index > 0, clk);
}
int clk_get_bulk(struct udevice *dev, struct clk_bulk *bulk)
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
index e1b5f8e6a9..2d47ebc6b1 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -28,10 +28,10 @@
* - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
*/
+#include <common.h>
#include <asm/io.h>
#include <clk-uclass.h>
#include <clk.h>
-#include <common.h>
#include <div64.h>
#include <dm.h>
#include <errno.h>
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index 98bd7a5823..c0a440886e 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -138,7 +138,9 @@ struct emac_eth_dev {
struct phy_device *phydev;
struct mii_dev *bus;
struct clk tx_clk;
+ struct clk ephy_clk;
struct reset_ctl tx_rst;
+ struct reset_ctl ephy_rst;
#ifdef CONFIG_DM_GPIO
struct gpio_desc reset_gpio;
#endif
@@ -653,7 +655,6 @@ static int sun8i_eth_write_hwaddr(struct udevice *dev)
static int sun8i_emac_board_setup(struct emac_eth_dev *priv)
{
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int ret;
ret = clk_enable(&priv->tx_clk);
@@ -670,16 +671,20 @@ static int sun8i_emac_board_setup(struct emac_eth_dev *priv)
}
}
- if (priv->variant == H3_EMAC) {
- /* Only H3/H5 have clock controls for internal EPHY */
- if (priv->use_internal_phy) {
- /* Set clock gating for ephy */
- setbits_le32(&ccm->bus_gate4,
- BIT(AHB_GATE_OFFSET_EPHY));
-
- /* Deassert EPHY */
- setbits_le32(&ccm->ahb_reset2_cfg,
- BIT(AHB_RESET_OFFSET_EPHY));
+ /* Only H3/H5 have clock controls for internal EPHY */
+ if (clk_valid(&priv->ephy_clk)) {
+ ret = clk_enable(&priv->ephy_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable EPHY TX clock\n");
+ return ret;
+ }
+ }
+
+ if (reset_valid(&priv->ephy_rst)) {
+ ret = reset_deassert(&priv->ephy_rst);
+ if (ret) {
+ dev_err(dev, "failed to deassert EPHY TX clock\n");
+ return ret;
}
}
@@ -839,6 +844,44 @@ static const struct eth_ops sun8i_emac_eth_ops = {
.stop = sun8i_emac_eth_stop,
};
+static int sun8i_get_ephy_nodes(struct emac_eth_dev *priv)
+{
+ int node, ret;
+
+ /* look for mdio-mux node for internal PHY node */
+ node = fdt_path_offset(gd->fdt_blob,
+ "/soc/ethernet@1c30000/mdio-mux/mdio@1/ethernet-phy@1");
+ if (node < 0) {
+ debug("failed to get mdio-mux with internal PHY\n");
+ return node;
+ }
+
+ ret = fdt_node_check_compatible(gd->fdt_blob, node,
+ "allwinner,sun8i-h3-mdio-internal");
+ if (ret < 0) {
+ debug("failed to find mdio-internal node\n");
+ return ret;
+ }
+
+ ret = clk_get_by_index_nodev(offset_to_ofnode(node), 0,
+ &priv->ephy_clk);
+ if (ret) {
+ dev_err(dev, "failed to get EPHY TX clock\n");
+ return ret;
+ }
+
+ ret = reset_get_by_index_nodev(offset_to_ofnode(node), 0,
+ &priv->ephy_rst);
+ if (ret) {
+ dev_err(dev, "failed to get EPHY TX reset\n");
+ return ret;
+ }
+
+ priv->use_internal_phy = true;
+
+ return 0;
+}
+
static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
{
struct sun8i_eth_pdata *sun8i_pdata = dev_get_platdata(dev);
@@ -920,12 +963,9 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev)
}
if (priv->variant == H3_EMAC) {
- int parent = fdt_parent_offset(gd->fdt_blob, offset);
-
- if (parent >= 0 &&
- !fdt_node_check_compatible(gd->fdt_blob, parent,
- "allwinner,sun8i-h3-mdio-internal"))
- priv->use_internal_phy = true;
+ ret = sun8i_get_ephy_nodes(priv);
+ if (ret)
+ return ret;
}
priv->interface = pdata->phy_interface;
diff --git a/drivers/reset/reset-uclass.c b/drivers/reset/reset-uclass.c
index 89e39c6b5a..ee1a423ffb 100644
--- a/drivers/reset/reset-uclass.c
+++ b/drivers/reset/reset-uclass.c
@@ -29,41 +29,34 @@ static int reset_of_xlate_default(struct reset_ctl *reset_ctl,
return 0;
}
-int reset_get_by_index(struct udevice *dev, int index,
- struct reset_ctl *reset_ctl)
+static int reset_get_by_index_tail(int ret, ofnode node,
+ struct ofnode_phandle_args *args,
+ const char *list_name, int index,
+ struct reset_ctl *reset_ctl)
{
- struct ofnode_phandle_args args;
- int ret;
struct udevice *dev_reset;
struct reset_ops *ops;
- debug("%s(dev=%p, index=%d, reset_ctl=%p)\n", __func__, dev, index,
- reset_ctl);
+ assert(reset_ctl);
reset_ctl->dev = NULL;
-
- ret = dev_read_phandle_with_args(dev, "resets", "#reset-cells", 0,
- index, &args);
- if (ret) {
- debug("%s: fdtdec_parse_phandle_with_args() failed: %d\n",
- __func__, ret);
+ if (ret)
return ret;
- }
- ret = uclass_get_device_by_ofnode(UCLASS_RESET, args.node,
+ ret = uclass_get_device_by_ofnode(UCLASS_RESET, args->node,
&dev_reset);
if (ret) {
debug("%s: uclass_get_device_by_ofnode() failed: %d\n",
__func__, ret);
- debug("%s %d\n", ofnode_get_name(args.node), args.args[0]);
+ debug("%s %d\n", ofnode_get_name(args->node), args->args[0]);
return ret;
}
ops = reset_dev_ops(dev_reset);
reset_ctl->dev = dev_reset;
if (ops->of_xlate)
- ret = ops->of_xlate(reset_ctl, &args);
+ ret = ops->of_xlate(reset_ctl, args);
else
- ret = reset_of_xlate_default(reset_ctl, &args);
+ ret = reset_of_xlate_default(reset_ctl, args);
if (ret) {
debug("of_xlate() failed: %d\n", ret);
return ret;
@@ -78,6 +71,32 @@ int reset_get_by_index(struct udevice *dev, int index,
return 0;
}
+int reset_get_by_index(struct udevice *dev, int index,
+ struct reset_ctl *reset_ctl)
+{
+ struct ofnode_phandle_args args;
+ int ret;
+
+ ret = dev_read_phandle_with_args(dev, "resets", "#reset-cells", 0,
+ index, &args);
+
+ return reset_get_by_index_tail(ret, dev_ofnode(dev), &args, "resets",
+ index > 0, reset_ctl);
+}
+
+int reset_get_by_index_nodev(ofnode node, int index,
+ struct reset_ctl *reset_ctl)
+{
+ struct ofnode_phandle_args args;
+ int ret;
+
+ ret = ofnode_parse_phandle_with_args(node, "resets", "#reset-cells", 0,
+ index > 0, &args);
+
+ return reset_get_by_index_tail(ret, node, &args, "resets",
+ index > 0, reset_ctl);
+}
+
int reset_get_bulk(struct udevice *dev, struct reset_ctl_bulk *bulk)
{
int i, ret, err, count;
diff --git a/drivers/serial/serial_sifive.c b/drivers/serial/serial_sifive.c
index 537bc7a975..fdfef69aaa 100644
--- a/drivers/serial/serial_sifive.c
+++ b/drivers/serial/serial_sifive.c
@@ -3,8 +3,8 @@
* Copyright (C) 2018 Anup Patel <anup@brainfault.org>
*/
-#include <clk.h>
#include <common.h>
+#include <clk.h>
#include <debug_uart.h>
#include <dm.h>
#include <errno.h>
diff --git a/drivers/spi/atcspi200_spi.c b/drivers/spi/atcspi200_spi.c
index af96c6d21e..e0cc323444 100644
--- a/drivers/spi/atcspi200_spi.c
+++ b/drivers/spi/atcspi200_spi.c
@@ -6,8 +6,8 @@
* Author: Rick Chen (rick@andestech.com)
*/
-#include <clk.h>
#include <common.h>
+#include <clk.h>
#include <malloc.h>
#include <spi.h>
#include <asm/io.h>
diff --git a/include/clk.h b/include/clk.h
index 8e366163f9..d24e99713a 100644
--- a/include/clk.h
+++ b/include/clk.h
@@ -8,6 +8,7 @@
#ifndef _CLK_H_
#define _CLK_H_
+#include <dm/ofnode.h>
#include <linux/errno.h>
#include <linux/types.h>
@@ -101,6 +102,20 @@ int clk_get_by_index_platdata(struct udevice *dev, int index,
int clk_get_by_index(struct udevice *dev, int index, struct clk *clk);
/**
+ * clock_get_by_index_nodev - Get/request a clock by integer index
+ * without a device.
+ *
+ * This is a version of clk_get_by_index() that does not use a device.
+ *
+ * @node: The client ofnode.
+ * @index: The index of the clock to request, within the client's list of
+ * clocks.
+ * @clock A pointer to a clock struct to initialize.
+ * @return 0 if OK, or a negative error code.
+ */
+int clk_get_by_index_nodev(ofnode node, int index, struct clk *clk);
+
+/**
* clock_get_bulk - Get/request all clocks of a device.
*
* This looks up and requests all clocks of the client device; each device is
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index accc21f56f..fceb812448 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -390,6 +390,18 @@ extern int soft_i2c_gpio_scl;
#define BOOT_TARGET_DEVICES_USB(func)
#endif
+#ifdef CONFIG_CMD_PXE
+#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
+#else
+#define BOOT_TARGET_DEVICES_PXE(func)
+#endif
+
+#ifdef CONFIG_CMD_DHCP
+#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
+#else
+#define BOOT_TARGET_DEVICES_DHCP(func)
+#endif
+
/* FEL boot support, auto-execute boot.scr if a script address was provided */
#define BOOTENV_DEV_FEL(devtypeu, devtypel, instance) \
"bootcmd_fel=" \
@@ -405,8 +417,8 @@ extern int soft_i2c_gpio_scl;
BOOT_TARGET_DEVICES_MMC(func) \
BOOT_TARGET_DEVICES_SCSI(func) \
BOOT_TARGET_DEVICES_USB(func) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na)
+ BOOT_TARGET_DEVICES_PXE(func) \
+ BOOT_TARGET_DEVICES_DHCP(func)
#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
#define BOOTCMD_SUNXI_COMPAT \
diff --git a/include/reset.h b/include/reset.h
index a1a9ad5603..4fac4e6a20 100644
--- a/include/reset.h
+++ b/include/reset.h
@@ -6,6 +6,7 @@
#ifndef _RESET_H
#define _RESET_H
+#include <dm/ofnode.h>
#include <linux/errno.h>
/**
@@ -103,6 +104,21 @@ int reset_get_by_index(struct udevice *dev, int index,
struct reset_ctl *reset_ctl);
/**
+ * reset_get_by_index_nodev - Get/request a reset signal by integer index
+ * without a device.
+ *
+ * This is a version of reset_get_by_index() that does not use a device.
+ *
+ * @node: The client ofnode.
+ * @index: The index of the reset signal to request, within the client's
+ * list of reset signals.
+ * @reset_ctl A pointer to a reset control struct to initialize.
+ * @return 0 if OK, or a negative error code.
+ */
+int reset_get_by_index_nodev(ofnode node, int index,
+ struct reset_ctl *reset_ctl);
+
+/**
* reset_get_bulk - Get/request all reset signals of a device.
*
* This looks up and requests all reset signals of the client device; each
diff --git a/test/dm/clk.c b/test/dm/clk.c
index 112d5cbbc9..f301ecbb45 100644
--- a/test/dm/clk.c
+++ b/test/dm/clk.c
@@ -4,12 +4,33 @@
*/
#include <common.h>
+#include <clk.h>
#include <dm.h>
#include <asm/clk.h>
#include <dm/test.h>
#include <linux/err.h>
#include <test/ut.h>
+/* Base test of the clk uclass */
+static int dm_test_clk_base(struct unit_test_state *uts)
+{
+ struct udevice *dev;
+ struct clk clk_method1;
+ struct clk clk_method2;
+
+ /* Get the device using the clk device */
+ ut_assertok(uclass_get_device_by_name(UCLASS_MISC, "clk-test", &dev));
+
+ /* Get the same clk port in 2 different ways and compare */
+ ut_assertok(clk_get_by_index(dev, 1, &clk_method1));
+ ut_assertok(clk_get_by_index_nodev(dev_ofnode(dev), 1, &clk_method2));
+ ut_asserteq(clk_method1.id, clk_method2.id);
+
+ return 0;
+}
+
+DM_TEST(dm_test_clk_base, DM_TESTF_SCAN_FDT);
+
static int dm_test_clk(struct unit_test_state *uts)
{
struct udevice *dev_fixed, *dev_fixed_factor, *dev_clk, *dev_test;
diff --git a/test/dm/reset.c b/test/dm/reset.c
index c02866a2f0..c61daed490 100644
--- a/test/dm/reset.c
+++ b/test/dm/reset.c
@@ -5,6 +5,7 @@
#include <common.h>
#include <dm.h>
+#include <reset.h>
#include <dm/test.h>
#include <asm/reset.h>
#include <test/ut.h>
@@ -15,6 +16,28 @@
/* This is the other reset phandle specifier handled by bulk */
#define OTHER_RESET_ID 2
+/* Base test of the reset uclass */
+static int dm_test_reset_base(struct unit_test_state *uts)
+{
+ struct udevice *dev;
+ struct reset_ctl reset_method1;
+ struct reset_ctl reset_method2;
+
+ /* Get the device using the reset device */
+ ut_assertok(uclass_get_device_by_name(UCLASS_MISC, "reset-ctl-test",
+ &dev));
+
+ /* Get the same reset port in 2 different ways and compare */
+ ut_assertok(reset_get_by_index(dev, 1, &reset_method1));
+ ut_assertok(reset_get_by_index_nodev(dev_ofnode(dev), 1,
+ &reset_method2));
+ ut_asserteq(reset_method1.id, reset_method2.id);
+
+ return 0;
+}
+
+DM_TEST(dm_test_reset_base, DM_TESTF_SCAN_FDT);
+
static int dm_test_reset(struct unit_test_state *uts)
{
struct udevice *dev_reset;