summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--cmd/bdinfo.c78
-rw-r--r--include/init.h6
2 files changed, 45 insertions, 39 deletions
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index a11f388413..4fadfd2ac7 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -17,7 +17,7 @@
DECLARE_GLOBAL_DATA_PTR;
-static void print_num(const char *name, ulong value)
+void bdinfo_print_num(const char *name, ulong value)
{
printf("%-12s= 0x%0*lx\n", name, 2 * (int)sizeof(value), value);
}
@@ -40,7 +40,7 @@ static void print_lnum(const char *name, unsigned long long value)
printf("%-12s= 0x%.8llX\n", name, value);
}
-static void print_mhz(const char *name, unsigned long hz)
+void bdinfo_print_mhz(const char *name, unsigned long hz)
{
char buf[32];
@@ -54,9 +54,9 @@ static void print_bi_dram(const bd_t *bd)
for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) {
if (bd->bi_dram[i].size) {
- print_num("DRAM bank", i);
- print_num("-> start", bd->bi_dram[i].start);
- print_num("-> size", bd->bi_dram[i].size);
+ bdinfo_print_num("DRAM bank", i);
+ bdinfo_print_num("-> start", bd->bi_dram[i].start);
+ bdinfo_print_num("-> size", bd->bi_dram[i].size);
}
}
#endif
@@ -72,50 +72,50 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
bd_t *bd = gd->bd;
#ifdef DEBUG
- print_num("bd address", (ulong)bd);
+ bdinfo_print_num("bd address", (ulong)bd);
#endif
if (IS_ENABLED(CONFIG_ARM))
- print_num("arch_number", bd->bi_arch_number);
- print_num("boot_params", (ulong)bd->bi_boot_params);
+ bdinfo_print_num("arch_number", bd->bi_arch_number);
+ bdinfo_print_num("boot_params", (ulong)bd->bi_boot_params);
print_bi_dram(bd);
- print_num("memstart", (ulong)bd->bi_memstart);
+ bdinfo_print_num("memstart", (ulong)bd->bi_memstart);
print_lnum("memsize", (u64)bd->bi_memsize);
- print_num("flashstart", (ulong)bd->bi_flashstart);
- print_num("flashsize", (ulong)bd->bi_flashsize);
- print_num("flashoffset", (ulong)bd->bi_flashoffset);
+ bdinfo_print_num("flashstart", (ulong)bd->bi_flashstart);
+ bdinfo_print_num("flashsize", (ulong)bd->bi_flashsize);
+ bdinfo_print_num("flashoffset", (ulong)bd->bi_flashoffset);
printf("baudrate = %u bps\n", gd->baudrate);
- print_num("relocaddr", gd->relocaddr);
- print_num("reloc off", gd->reloc_off);
+ bdinfo_print_num("relocaddr", gd->relocaddr);
+ bdinfo_print_num("reloc off", gd->reloc_off);
printf("%-12s= %u-bit\n", "Build", (uint)sizeof(void *) * 8);
if (IS_ENABLED(CONFIG_CMD_NET)) {
printf("current eth = %s\n", eth_get_name());
print_eth(0);
printf("IP addr = %s\n", env_get("ipaddr"));
}
- print_num("fdt_blob", (ulong)gd->fdt_blob);
- print_num("new_fdt", (ulong)gd->new_fdt);
- print_num("fdt_size", (ulong)gd->fdt_size);
+ bdinfo_print_num("fdt_blob", (ulong)gd->fdt_blob);
+ bdinfo_print_num("new_fdt", (ulong)gd->new_fdt);
+ bdinfo_print_num("fdt_size", (ulong)gd->fdt_size);
#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
- print_num("FB base ", gd->fb_base);
+ bdinfo_print_num("FB base ", gd->fb_base);
#endif
/* This section is used only by ARM */
#ifdef CONFIG_ARM
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
- print_num("Secure ram",
+ bdinfo_print_num("Secure ram",
gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
}
#endif
#ifdef CONFIG_RESV_RAM
if (gd->arch.resv_ram)
- print_num("Reserved ram", gd->arch.resv_ram);
+ bdinfo_print_num("Reserved ram", gd->arch.resv_ram);
#endif
#if !(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
- print_num("TLB addr", gd->arch.tlb_addr);
+ bdinfo_print_num("TLB addr", gd->arch.tlb_addr);
#endif
- print_num("irq_sp", gd->irq_sp); /* irq stack pointer */
- print_num("sp start ", gd->start_addr_sp);
+ bdinfo_print_num("irq_sp", gd->irq_sp); /* irq stack pointer */
+ bdinfo_print_num("sp start ", gd->start_addr_sp);
/*
* TODO: Currently only support for davinci SOC's is added.
* Remove this check once all the board implement this.
@@ -133,17 +133,17 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
CONFIG_VAL(SYS_MALLOC_F_LEN));
#endif
#if CONFIG_IS_ENABLED(MULTI_DTB_FIT)
- print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit);
+ bdinfo_print_num("multi_dtb_fit", (ulong)gd->multi_dtb_fit);
#endif
#endif /* CONFIG_ARM */
/* This section is used only by ppc */
#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500)
- print_num("immr_base", bd->bi_immr_base);
+ bdinfo_print_num("immr_base", bd->bi_immr_base);
#endif
if (IS_ENABLED(CONFIG_PPC)) {
- print_num("bootflags", bd->bi_bootflags);
- print_mhz("intfreq", bd->bi_intfreq);
+ bdinfo_print_num("bootflags", bd->bi_bootflags);
+ bdinfo_print_mhz("intfreq", bd->bi_intfreq);
#ifdef CONFIG_ENABLE_36BIT_PHYS
if (IS_ENABLED(CONFIG_PHYS_64BIT))
puts("addressing = 36-bit\n");
@@ -153,32 +153,32 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
board_detail();
}
#if defined(CONFIG_CPM2)
- print_mhz("cpmfreq", bd->bi_cpmfreq);
- print_mhz("vco", bd->bi_vco);
- print_mhz("sccfreq", bd->bi_sccfreq);
- print_mhz("brgfreq", bd->bi_brgfreq);
+ bdinfo_print_mhz("cpmfreq", bd->bi_cpmfreq);
+ bdinfo_print_mhz("vco", bd->bi_vco);
+ bdinfo_print_mhz("sccfreq", bd->bi_sccfreq);
+ bdinfo_print_mhz("brgfreq", bd->bi_brgfreq);
#endif
/* This is used by m68k and ppc */
#if defined(CONFIG_SYS_INIT_RAM_ADDR)
- print_num("sramstart", (ulong)bd->bi_sramstart);
- print_num("sramsize", (ulong)bd->bi_sramsize);
+ bdinfo_print_num("sramstart", (ulong)bd->bi_sramstart);
+ bdinfo_print_num("sramsize", (ulong)bd->bi_sramsize);
#endif
if (IS_ENABLED(CONFIG_PPC) || IS_ENABLED(CONFIG_M68K))
- print_mhz("busfreq", bd->bi_busfreq);
+ bdinfo_print_mhz("busfreq", bd->bi_busfreq);
/* The rest are used only by m68k */
#ifdef CONFIG_M68K
#if defined(CONFIG_SYS_MBAR)
print_num("mbar", bd->bi_mbar_base);
#endif
- print_mhz("cpufreq", bd->bi_intfreq);
+ bdinfo_print_mhz("cpufreq", bd->bi_intfreq);
if (IS_ENABLED(CONFIG_PCI))
- print_mhz("pcifreq", bd->bi_pcifreq);
+ bdinfo_print_mhz("pcifreq", bd->bi_pcifreq);
#ifdef CONFIG_EXTRA_CLOCK
- print_mhz("flbfreq", bd->bi_flbfreq);
- print_mhz("inpfreq", bd->bi_inpfreq);
- print_mhz("vcofreq", bd->bi_vcofreq);
+ bdinfo_print_mhz("flbfreq", bd->bi_flbfreq);
+ bdinfo_print_mhz("inpfreq", bd->bi_inpfreq);
+ bdinfo_print_mhz("vcofreq", bd->bi_vcofreq);
#endif
#endif
diff --git a/include/init.h b/include/init.h
index b5a167b6ed..af4deed566 100644
--- a/include/init.h
+++ b/include/init.h
@@ -261,6 +261,12 @@ void relocate_code(ulong start_addr_sp, struct global_data *new_gd,
__attribute__ ((noreturn));
#endif
+/* Print a numeric value (for use in arch_print_bdinfo()) */
+void bdinfo_print_num(const char *name, ulong value);
+
+/* Print a clock speed in MHz */
+void bdinfo_print_mhz(const char *name, unsigned long hz);
+
#endif /* __ASSEMBLY__ */
/* Put only stuff here that the assembler can digest */