diff options
Diffstat (limited to 'arch/arm/dts/k3-am642-r5-sk.dts')
| -rw-r--r-- | arch/arm/dts/k3-am642-r5-sk.dts | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/arch/arm/dts/k3-am642-r5-sk.dts b/arch/arm/dts/k3-am642-r5-sk.dts index 97f44e220a..9ff4dd3dd3 100644 --- a/arch/arm/dts/k3-am642-r5-sk.dts +++ b/arch/arm/dts/k3-am642-r5-sk.dts @@ -27,7 +27,7 @@ device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - u-boot,dm-spl; + bootph-pre-ram; }; a53_0: a53@0 { @@ -43,7 +43,7 @@ ti,sci = <&dmsc>; ti,sci-proc-id = <32>; ti,sci-host-id = <10>; - u-boot,dm-spl; + bootph-pre-ram; }; reserved-memory { @@ -62,7 +62,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; - u-boot,dm-spl; + bootph-pre-ram; }; }; @@ -71,7 +71,7 @@ compatible = "ti,am654-system-controller"; mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>; mbox-names = "tx", "rx"; - u-boot,dm-spl; + bootph-pre-ram; }; }; @@ -80,24 +80,24 @@ compatible = "ti,j721e-esm"; reg = <0x0 0x420000 0x0 0x1000>; ti,esm-pins = <160>, <161>; - u-boot,dm-spl; + bootph-pre-ram; }; }; &cbass_mcu { - u-boot,dm-spl; + bootph-pre-ram; mcu_esm: esm@4100000 { compatible = "ti,j721e-esm"; reg = <0x0 0x4100000 0x0 0x1000>; ti,esm-pins = <0>, <1>; - u-boot,dm-spl; + bootph-pre-ram; }; }; &main_pmx0 { - u-boot,dm-spl; + bootph-pre-ram; main_uart0_pins_default: main-uart0-pins-default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -107,7 +107,7 @@ }; main_uart1_pins_default: main-uart1-pins-default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ @@ -117,7 +117,7 @@ }; main_mmc1_pins_default: main-mmc1-pins-default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ @@ -131,7 +131,7 @@ }; main_usb0_pins_default: main-usb0-pins-default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; @@ -198,7 +198,7 @@ }; &main_uart1 { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-names = "default"; pinctrl-0 = <&main_uart1_pins_default>; }; |