diff options
Diffstat (limited to 'arch/arm/dts/k3-j7200-r5-common-proc-board.dts')
| -rw-r--r-- | arch/arm/dts/k3-j7200-r5-common-proc-board.dts | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts index b1f9e714d9..55ad6153dd 100644 --- a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts +++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts @@ -22,7 +22,7 @@ }; fs_loader0: fs_loader@0 { - u-boot,dm-pre-reloc; + bootph-all; compatible = "u-boot,fs-loader"; }; @@ -38,21 +38,21 @@ ti,sci = <&dmsc>; ti,sci-proc-id = <32>; ti,sci-host-id = <10>; - u-boot,dm-spl; + bootph-pre-ram; }; clk_200mhz: dummy_clock_200mhz { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; - u-boot,dm-spl; + bootph-pre-ram; }; clk_19_2mhz: dummy_clock_19_2mhz { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; - u-boot,dm-spl; + bootph-pre-ram; }; }; @@ -64,7 +64,7 @@ &cbass_mcu_wakeup { mcu_secproxy: secproxy@2a380000 { - u-boot,dm-spl; + bootph-pre-ram; compatible = "ti,am654-secure-proxy"; reg = <0x0 0x2a380000 0x0 0x80000>, <0x0 0x2a400000 0x0 0x80000>, @@ -74,7 +74,7 @@ }; sysctrler: sysctrler { - u-boot,dm-spl; + bootph-pre-ram; compatible = "ti,am654-system-controller"; mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>; mbox-names = "tx", "rx"; @@ -87,7 +87,7 @@ mbox-names = "rx", "tx"; mboxes= <&mcu_secproxy 21>, <&mcu_secproxy 23>; - u-boot,dm-spl; + bootph-pre-ram; }; wkup_vtm0: vtm@42040000 { @@ -106,9 +106,9 @@ }; &wkup_pmx0 { - u-boot,dm-spl; + bootph-pre-ram; wkup_uart0_pins_default: wkup_uart0_pins_default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */ J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */ @@ -116,7 +116,7 @@ }; mcu_uart0_pins_default: mcu_uart0_pins_default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) WKUP_GPIO0_13.MCU_UART0_RXD */ J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) WKUP_GPIO0_12.MCU_UART0_TXD */ @@ -159,10 +159,10 @@ }; &main_pmx0 { - u-boot,dm-spl; + bootph-pre-ram; main_uart0_pins_default: main_uart0_pins_default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */ J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */ @@ -172,7 +172,7 @@ }; main_i2c0_pins_default: main-i2c0-pins-default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ @@ -200,7 +200,7 @@ }; &wkup_uart0 { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; status = "okay"; @@ -247,17 +247,17 @@ }; &wkup_i2c0 { - u-boot,dm-spl; + bootph-pre-ram; lp876441: lp876441@4c { compatible = "ti,lp876441"; reg = <0x4c>; - u-boot,dm-spl; + bootph-pre-ram; pinctrl-names = "default"; pinctrl-0 = <&wkup_i2c0_pins_default>; clock-frequency = <400000>; regulators: regulators { - u-boot,dm-spl; + bootph-pre-ram; buck1_reg: buck1 { /*VDD_CPU_AVS_REG*/ regulator-name = "buck1"; @@ -265,7 +265,7 @@ regulator-max-microvolt = <1250000>; regulator-always-on; regulator-boot-on; - u-boot,dm-spl; + bootph-pre-ram; }; }; }; @@ -274,7 +274,7 @@ &wkup_vtm0 { vdd-supply-2 = <&buck1_reg>; - u-boot,dm-spl; + bootph-pre-ram; }; &main_i2c0 { |