diff options
Diffstat (limited to 'arch/arm/dts/k3-j721e-r5-sk.dts')
| -rw-r--r-- | arch/arm/dts/k3-j721e-r5-sk.dts | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/arch/arm/dts/k3-j721e-r5-sk.dts b/arch/arm/dts/k3-j721e-r5-sk.dts index d894dcb991..8d6eaa4fbb 100644 --- a/arch/arm/dts/k3-j721e-r5-sk.dts +++ b/arch/arm/dts/k3-j721e-r5-sk.dts @@ -167,27 +167,27 @@ ti,sci = <&dmsc>; ti,sci-proc-id = <32>; ti,sci-host-id = <10>; - u-boot,dm-spl; + bootph-pre-ram; }; clk_200mhz: dummy_clock_200mhz { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <200000000>; - u-boot,dm-spl; + bootph-pre-ram; }; clk_19_2mhz: dummy_clock_19_2mhz { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; - u-boot,dm-spl; + bootph-pre-ram; }; }; &cbass_mcu_wakeup { mcu_secproxy: secproxy@28380000 { - u-boot,dm-spl; + bootph-pre-ram; compatible = "ti,am654-secure-proxy"; reg = <0x0 0x2a380000 0x0 0x80000>, <0x0 0x2a400000 0x0 0x80000>, @@ -197,7 +197,7 @@ }; sysctrler: sysctrler { - u-boot,dm-spl; + bootph-pre-ram; compatible = "ti,am654-system-controller"; mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>; mbox-names = "tx", "rx"; @@ -217,7 +217,7 @@ mbox-names = "rx", "tx"; mboxes= <&mcu_secproxy 21>, <&mcu_secproxy 23>; - u-boot,dm-spl; + bootph-pre-ram; }; }; @@ -226,7 +226,7 @@ compatible = "ti,j721e-esm"; reg = <0x0 0x700000 0x0 0x1000>; ti,esm-pins = <344>, <345>; - u-boot,dm-spl; + bootph-pre-ram; }; }; @@ -239,7 +239,7 @@ &wkup_pmx0 { wkup_uart0_pins_default: wkup_uart0_pins_default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ @@ -247,7 +247,7 @@ }; mcu_uart0_pins_default: mcu_uart0_pins_default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 2) /* (D26) MCU_I3C0_SCL.MCU_UART0_CTSn */ J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */ @@ -289,7 +289,7 @@ &main_pmx0 { main_uart0_pins_default: main_uart0_pins_default { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-single,pins = < J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */ J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */ @@ -361,7 +361,7 @@ }; &wkup_uart0 { - u-boot,dm-spl; + bootph-pre-ram; pinctrl-names = "default"; pinctrl-0 = <&wkup_uart0_pins_default>; status = "okay"; @@ -400,17 +400,17 @@ }; &wkup_i2c0 { - u-boot,dm-spl; + bootph-pre-ram; tps659412: tps659412@48 { reg = <0x48>; compatible = "ti,tps659412"; - u-boot,dm-spl; + bootph-pre-ram; pinctrl-names = "default"; pinctrl-0 = <&wkup_i2c0_pins_default>; clock-frequency = <400000>; regulators: regulators { - u-boot,dm-spl; + bootph-pre-ram; /* 3 Phase Buck */ buck123_reg: buck123 { /* VDD_CPU */ @@ -419,7 +419,7 @@ regulator-max-microvolt = <1250000>; regulator-always-on; regulator-boot-on; - u-boot,dm-spl; + bootph-pre-ram; }; }; }; @@ -427,7 +427,7 @@ &wkup_vtm0 { vdd-supply-2 = <&buck123_reg>; - u-boot,dm-spl; + bootph-pre-ram; }; &usbss0 { |