diff options
Diffstat (limited to 'arch/arm/dts/meson-g12a-u-boot.dtsi')
| -rw-r--r-- | arch/arm/dts/meson-g12a-u-boot.dtsi | 216 |
1 files changed, 0 insertions, 216 deletions
diff --git a/arch/arm/dts/meson-g12a-u-boot.dtsi b/arch/arm/dts/meson-g12a-u-boot.dtsi deleted file mode 100644 index 8e0c81f199..0000000000 --- a/arch/arm/dts/meson-g12a-u-boot.dtsi +++ /dev/null @@ -1,216 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 BayLibre, SAS. - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ - -/ { - soc { - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.710", - "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; - status = "disabled"; - - mdio0: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; - }; - - sd_emmc_a: sd@ffe03000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_A>, - <&clkc CLKID_SD_EMMC_A_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_A>; - }; - - sd_emmc_b: sd@ffe05000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; - }; - - sd_emmc_c: mmc@ffe07000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; - }; - }; -}; - -&periphs_pinctrl { - emmc_pins: emmc { - mux { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_clk", - "emmc_cmd"; - function = "emmc"; - bias-pull-up; - }; - }; - - emmc_ds_pins: emmc-ds { - mux { - groups = "emmc_nand_ds"; - function = "emmc"; - bias-pull-down; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - eth_leds_pins: eth-leds { - mux { - groups = "eth_link_led", - "eth_act_led"; - function = "eth"; - bias-disable; - }; - }; - - eth_rmii_pins: eth-rmii { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_rgmii_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_txen", - "eth_txd0", - "eth_txd1"; - function = "eth"; - bias-disable; - }; - }; - - eth_rgmii_pins: eth-rgmii { - mux { - groups = "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - bias-disable; - }; - }; - - sdcard_c_pins: sdcard_c { - mux { - groups = "sdcard_d0_c", - "sdcard_d1_c", - "sdcard_d2_c", - "sdcard_d3_c", - "sdcard_cmd_c", - "sdcard_clk_c"; - function = "sdcard"; - bias-pull-up; - }; - }; - - sdcard_clk_gate_c_pins: sdcard_clk_gate_c { - mux { - groups = "GPIOC_4"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - sdcard_z_pins: sdcard_z { - mux { - groups = "sdcard_d0_z", - "sdcard_d1_z", - "sdcard_d2_z", - "sdcard_d3_z", - "sdcard_cmd_z", - "sdcard_clk_z"; - function = "sdcard"; - bias-pull-up; - }; - }; - - sdcard_clk_gate_z_pins: sdcard_clk_gate_z { - mux { - groups = "GPIOZ_6"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; -}; - -&periphs { - eth_phy: mdio-multiplexer@4c000 { - compatible = "amlogic,g12a-mdio-mux"; - reg = <0x0 0x4c000 0x0 0xa4>; - clocks = <&clkc CLKID_ETH_PHY>, - <&xtal>, - <&clkc CLKID_MPLL_5OM>; - clock-names = "pclk", "clkin0", "clkin1"; - mdio-parent-bus = <&mdio0>; - #address-cells = <1>; - #size-cells = <0>; - - ext_mdio: mdio@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - int_mdio: mdio@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - internal_ephy: ethernet_phy@8 { - compatible = "ethernet-phy-id0180.3300", - "ethernet-phy-ieee802.3-c22"; - reg = <8>; - max-speed = <100>; - - /* FIXME: Add irq support */ - }; - }; - }; -}; - - |