diff options
Diffstat (limited to 'arch/arm/dts/px30-evb.dts')
| -rw-r--r-- | arch/arm/dts/px30-evb.dts | 143 |
1 files changed, 124 insertions, 19 deletions
diff --git a/arch/arm/dts/px30-evb.dts b/arch/arm/dts/px30-evb.dts index 4134e2ee13..848bc39cf8 100644 --- a/arch/arm/dts/px30-evb.dts +++ b/arch/arm/dts/px30-evb.dts @@ -13,8 +13,14 @@ model = "Rockchip PX30 EVB"; compatible = "rockchip,px30-evb", "rockchip,px30"; + aliases { + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; + }; + chosen { - stdout-path = "serial2:115200n8"; + stdout-path = "serial5:115200n8"; }; adc-keys { @@ -108,6 +114,10 @@ cpu-supply = <&vdd_arm>; }; +&csi_dphy { + status = "okay"; +}; + &display_subsystem { status = "okay"; }; @@ -126,22 +136,15 @@ }; panel@0 { - compatible = "sitronix,st7703"; + compatible = "xinpeng,xpp055c272"; reg = <0>; backlight = <&backlight>; iovcc-supply = <&vcc_1v8>; vci-supply = <&vcc3v3_lcd>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; }; }; }; @@ -152,7 +155,6 @@ }; &emmc { - bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; @@ -171,6 +173,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -388,6 +395,73 @@ }; }; +&i2c1 { + status = "okay"; + + sensor@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc3v0_pmu>; + mount-matrix = "1", /* x0 */ + "0", /* y0 */ + "0", /* z0 */ + "0", /* x1 */ + "1", /* y1 */ + "0", /* z1 */ + "0", /* x2 */ + "0", /* y2 */ + "1"; /* z2 */ + }; + + touchscreen@14 { + compatible = "goodix,gt1151"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + VDDIO-supply = <&vcc3v3_lcd>; + }; + + sensor@4c { + compatible = "fsl,mma7660"; + reg = <0x4c>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + status = "okay"; + + clock-frequency = <100000>; + + /* These are relatively safe rise/fall times; TODO: measure */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + ov5695: ov5695@36 { + compatible = "ovti,ov5695"; + reg = <0x36>; + avdd-supply = <&vcc2v8_dvp>; + clocks = <&cru SCLK_CIF_OUT>; + clock-names = "xvclk"; + dvdd-supply = <&vcc1v5_dvp>; + dovdd-supply = <&vcc1v8_dvp>; + pinctrl-names = "default"; + pinctrl-0 = <&cif_clkout_m0>; + reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + + port { + ucam_out: endpoint { + remote-endpoint = <&mipi_in_ucam>; + data-lanes = <1 2>; + }; + }; + }; +}; + &i2s1_2ch { status = "okay"; }; @@ -403,6 +477,24 @@ vccio6-supply = <&vccio_flash>; }; +&isp { + status = "okay"; + + ports { + port@0 { + mipi_in_ucam: endpoint@0 { + reg = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ucam_out>; + }; + }; + }; +}; + +&isp_mmu { + status = "okay"; +}; + &pinctrl { headphone { hp_det: hp-det { @@ -464,7 +556,6 @@ }; &sdmmc { - bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <800>; @@ -474,10 +565,10 @@ sd-uhs-sdr104; vmmc-supply = <&vcc_sd>; vqmmc-supply = <&vccio_sd>; + status = "okay"; }; &sdio { - bus-width = <4>; cap-sd-highspeed; keep-power-in-suspend; non-removable; @@ -486,13 +577,27 @@ status = "okay"; }; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer &uart1_cts>; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; status = "okay"; }; -&uart2 { +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts>; status = "okay"; }; |