diff options
Diffstat (limited to 'arch/arm/dts/rk3328-nanopi-r2s.dts')
| -rw-r--r-- | arch/arm/dts/rk3328-nanopi-r2s.dts | 51 |
1 files changed, 45 insertions, 6 deletions
diff --git a/arch/arm/dts/rk3328-nanopi-r2s.dts b/arch/arm/dts/rk3328-nanopi-r2s.dts index 5445c5cb3d..3857d487ab 100644 --- a/arch/arm/dts/rk3328-nanopi-r2s.dts +++ b/arch/arm/dts/rk3328-nanopi-r2s.dts @@ -13,6 +13,11 @@ model = "FriendlyElec NanoPi R2S"; compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328"; + aliases { + ethernet1 = &rtl8153; + mmc0 = &sdmmc; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -50,6 +55,7 @@ sys_led: led-1 { gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; label = "nanopi-r2s:red:sys"; + default-state = "on"; }; wan_led: led-2 { @@ -71,15 +77,15 @@ regulator-settling-time-us = <5000>; regulator-type = "voltage"; startup-delay-us = <2000>; - states = <1800000 0x1 - 3300000 0x0>; + states = <1800000 0x1>, + <3300000 0x0>; vin-supply = <&vcc_io_33>; }; vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&sdmmc0m1_gpio>; + pinctrl-0 = <&sdmmc0m1_pin>; pinctrl-names = "default"; regulator-name = "vcc_sd"; regulator-boot-on; @@ -96,6 +102,18 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + vdd_5v_lan: vdd-5v-lan { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lan_vdd_pin>; + pinctrl-names = "default"; + regulator-name = "vdd_5v_lan"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v>; + }; }; &cpu0 { @@ -114,6 +132,10 @@ cpu-supply = <&vdd_arm>; }; +&display_subsystem { + status = "disabled"; +}; + &gmac2io { assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; @@ -134,8 +156,6 @@ #size-cells = <0>; rtl8211e: ethernet-phy@1 { - compatible = "ethernet-phy-id001c.c915", - "ethernet-phy-ieee802.3-c22"; reg = <1>; pinctrl-0 = <ð_phy_reset_pin>; pinctrl-names = "default"; @@ -282,7 +302,7 @@ }; }; - ethernet-phy { + gmac2io { eth_phy_reset_pin: eth-phy-reset-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; @@ -302,6 +322,12 @@ }; }; + lan { + lan_vdd_pin: lan-vdd-pin { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; @@ -361,6 +387,19 @@ dr_mode = "host"; }; +&usbdrd3 { + dr_mode = "host"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* Second port is for USB 3.0 */ + rtl8153: device@2 { + compatible = "usbbda,8153"; + reg = <2>; + }; +}; + &usb_host0_ehci { status = "okay"; }; |