diff options
Diffstat (limited to 'arch/arm/dts/rk3399-roc-pc.dtsi')
-rw-r--r-- | arch/arm/dts/rk3399-roc-pc.dtsi | 59 |
1 files changed, 44 insertions, 15 deletions
diff --git a/arch/arm/dts/rk3399-roc-pc.dtsi b/arch/arm/dts/rk3399-roc-pc.dtsi index 9f225e9c3d..d1aaf8e833 100644 --- a/arch/arm/dts/rk3399-roc-pc.dtsi +++ b/arch/arm/dts/rk3399-roc-pc.dtsi @@ -13,6 +13,11 @@ model = "Firefly ROC-RK3399-PC Board"; compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; + aliases { + mmc0 = &sdmmc; + mmc1 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -58,30 +63,37 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>; - work-led { + work_led: led-0 { label = "green:work"; gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; - diy-led { + diy_led: led-1 { label = "red:diy"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc1"; + linux,default-trigger = "mmc2"; }; - yellow-led { + yellow_led: led-2 { label = "yellow:yellow-led"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; default-state = "off"; - linux,default-trigger = "mmc0"; + linux,default-trigger = "mmc1"; }; }; @@ -110,6 +122,14 @@ regulator-max-microvolt = <5000000>; }; + sys_12v: sys-12v { + compatible = "regulator-fixed"; + regulator-name = "sys_12v"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&dc_12v>; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -141,7 +161,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; vcca_0v9: vcca-0v9 { @@ -186,7 +206,7 @@ regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; + vin-supply = <&sys_12v>; }; vdd_log: vdd-log { @@ -376,6 +396,7 @@ vcc_sdio: LDO_REG4 { regulator-name = "vcc_sdio"; + regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; @@ -456,7 +477,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -475,11 +496,13 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; vin-supply = <&vcc3v3_sys>; regulator-state-mem { @@ -588,6 +611,12 @@ }; }; + ir { + ir_int: ir-int { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + lcd-panel { lcd_panel_reset: lcd-panel-reset { rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -595,25 +624,25 @@ }; leds { - diy_led_gpio: diy_led-gpio { + diy_led_pin: diy-led-pin { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; - work_led_gpio: work_led-gpio { + work_led_pin: work-led-pin { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; - yellow_led_gpio: yellow_led-gpio { + yellow_led_pin: yellow-led-pin { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; |