diff options
Diffstat (limited to 'arch/arm/dts/stm32mp157a-dk1.dts')
| -rw-r--r-- | arch/arm/dts/stm32mp157a-dk1.dts | 32 |
1 files changed, 21 insertions, 11 deletions
diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts index e36773dde9..adb2464920 100644 --- a/arch/arm/dts/stm32mp157a-dk1.dts +++ b/arch/arm/dts/stm32mp157a-dk1.dts @@ -39,12 +39,19 @@ }; }; +&cec { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cec_pins_b>; + pinctrl-1 = <&cec_pins_sleep_b>; + status = "okay"; +}; + ðernet0 { status = "okay"; pinctrl-0 = <ðernet0_rgmii_pins_a>; pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; pinctrl-names = "default", "sleep"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; max-speed = <1000>; phy-handle = <&phy0>; @@ -58,12 +65,14 @@ }; }; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + /* spare dmas for other usage */ /delete-property/dmas; /delete-property/dma-names; @@ -88,17 +97,13 @@ pmic: stpmic@33 { compatible = "st,stpmic1"; reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; status = "okay"; - st,main-control-register = <0x04>; - st,vin-control-register = <0xc0>; - st,usb-control-register = <0x20>; - regulators { compatible = "st,stpmic1-regulators"; - ldo1-supply = <&v3v3>; ldo3-supply = <&vdd_ddr>; ldo6-supply = <&v3v3>; @@ -107,7 +112,7 @@ vddcore: buck1 { regulator-name = "vddcore"; - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <1350000>; regulator-always-on; regulator-initial-mode = <0>; @@ -187,7 +192,6 @@ regulator-max-microvolt = <1200000>; regulator-always-on; interrupts = <IT_CURLIM_LDO6 0>; - }; vref_ddr: vref_ddr { @@ -204,7 +208,6 @@ vbus_otg: pwr_sw1 { regulator-name = "vbus_otg"; interrupts = <IT_OCP_OTG 0>; - regulator-active-discharge; }; vbus_sw: pwr_sw2 { @@ -216,8 +219,9 @@ onkey { compatible = "st,stpmic1-onkey"; - interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; status = "okay"; }; @@ -228,6 +232,10 @@ }; }; +&ipcc { + status = "okay"; +}; + &iwdg2 { timeout-sec = <32>; status = "okay"; @@ -246,8 +254,10 @@ }; &sdmmc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; broken-cd; st,neg-edge; bus-width = <4>; |