summaryrefslogtreecommitdiff
path: root/arch/arm/mach-lpc32xx/cpu.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-lpc32xx/cpu.c')
-rw-r--r--arch/arm/mach-lpc32xx/cpu.c78
1 files changed, 78 insertions, 0 deletions
diff --git a/arch/arm/mach-lpc32xx/cpu.c b/arch/arm/mach-lpc32xx/cpu.c
new file mode 100644
index 0000000000..4c59a44f7e
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/cpu.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2011-2015 by Vladimir Zapolskiy <vz@mleia.com>
+ */
+
+#include <common.h>
+#include <cpu_func.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/wdt.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+
+static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
+static struct wdt_regs *wdt = (struct wdt_regs *)WDT_BASE;
+
+void reset_cpu(ulong addr)
+{
+ /* Enable watchdog clock */
+ setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
+
+ /* To be compatible with the original U-Boot code:
+ * addr: - 0: perform hard reset.
+ * - !=0: perform a soft reset; i.e. "RESOUT_N" not asserted). */
+ if (addr == 0) {
+ /* Reset pulse length is 13005 peripheral clock frames */
+ writel(13000, &wdt->pulse);
+
+ /* Force WDOG_RESET2 and RESOUT_N signal active */
+ writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1
+ | WDTIM_MCTRL_M_RES2, &wdt->mctrl);
+ } else {
+ /* Force match output active */
+ writel(0x01, &wdt->emr);
+
+ /* Internal reset on match output (no pulse on "RESOUT_N") */
+ writel(WDTIM_MCTRL_M_RES1, &wdt->mctrl);
+ }
+
+ while (1)
+ /* NOP */;
+}
+
+#if defined(CONFIG_ARCH_CPU_INIT)
+int arch_cpu_init(void)
+{
+ /*
+ * It might be necessary to flush data cache, if U-Boot is loaded
+ * from kickstart bootloader, e.g. from S1L loader
+ */
+ flush_dcache_all();
+
+ return 0;
+}
+#else
+#error "You have to select CONFIG_ARCH_CPU_INIT"
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ printf("CPU: NXP LPC32XX\n");
+ printf("CPU clock: %uMHz\n", get_hclk_pll_rate() / 1000000);
+ printf("AHB bus clock: %uMHz\n", get_hclk_clk_rate() / 1000000);
+ printf("Peripheral clock: %uMHz\n", get_periph_clk_rate() / 1000000);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_LPC32XX_ETH
+int cpu_eth_init(bd_t *bis)
+{
+ lpc32xx_eth_initialize(bis);
+ return 0;
+}
+#endif