diff options
Diffstat (limited to 'arch/arm')
39 files changed, 3273 insertions, 106 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b7780de776..bd5887bf75 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -125,6 +125,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3328) += \ rk3328-evb.dtb \ rk3328-nanopi-r2c.dtb \ rk3328-nanopi-r2s.dtb \ + rk3328-orangepi-r1-plus.dtb \ + rk3328-orangepi-r1-plus-lts.dtb \ rk3328-roc-cc.dtb \ rk3328-rock64.dtb \ rk3328-rock-pi-e.dtb @@ -159,6 +161,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ rk3399-roc-pc.dtb \ rk3399-roc-pc-mezzanine.dtb \ rk3399-rock-4c-plus.dtb \ + rk3399-rock-4se.dtb \ rk3399-rock-pi-4a.dtb \ rk3399-rock-pi-4c.dtb \ rk3399-rock960.dtb \ @@ -169,10 +172,14 @@ dtb-$(CONFIG_ROCKCHIP_RK3568) += \ rk3566-anbernic-rgxx3.dtb \ rk3566-radxa-cm3-io.dtb \ rk3568-evb.dtb \ + rk3568-nanopi-r5c.dtb \ + rk3568-nanopi-r5s.dtb \ + rk3568-odroid-m1.dtb \ rk3568-rock-3a.dtb dtb-$(CONFIG_ROCKCHIP_RK3588) += \ rk3588-edgeble-neu6a-io.dtb \ + rk3588-edgeble-neu6b-io.dtb \ rk3588-evb1-v10.dtb \ rk3588-rock-5b.dtb diff --git a/arch/arm/dts/rk3288-u-boot.dtsi b/arch/arm/dts/rk3288-u-boot.dtsi index 1920698884..c4c5a2d225 100644 --- a/arch/arm/dts/rk3288-u-boot.dtsi +++ b/arch/arm/dts/rk3288-u-boot.dtsi @@ -4,7 +4,6 @@ */ #include "rockchip-u-boot.dtsi" -#include "rockchip-optee.dtsi" / { aliases { diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi new file mode 100644 index 0000000000..ebe33e48cb --- /dev/null +++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts-u-boot.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd + * (C) Copyright 2020 David Bauer + */ + +#include "rk3328-u-boot.dtsi" +#include "rk3328-sdram-lpddr3-666.dtsi" +/ { + chosen { + u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc; + }; +}; + +&gpio0 { + bootph-pre-ram; +}; + +&pinctrl { + bootph-pre-ram; +}; + +&sdmmc0m1_pin { + bootph-pre-ram; +}; + +&pcfg_pull_up_4ma { + bootph-pre-ram; +}; + +/* Need this and all the pinctrl/gpio stuff above to set pinmux */ +&vcc_sd { + bootph-pre-ram; +}; + +&gmac2io { + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; +}; + +&spi0 { + spi_flash: spiflash@0 { + bootph-all; + }; +}; diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts b/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts new file mode 100644 index 0000000000..5d7d567283 --- /dev/null +++ b/arch/arm/dts/rk3328-orangepi-r1-plus-lts.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Xunlong Software. Co., Ltd. + * (http://www.orangepi.org) + * + * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3328-orangepi-r1-plus.dts" + +/ { + model = "Xunlong Orange Pi R1 Plus LTS"; + compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328"; +}; + +&gmac2io { + phy-handle = <&yt8531c>; + tx_delay = <0x19>; + rx_delay = <0x05>; + + mdio { + /delete-node/ ethernet-phy@1; + + yt8531c: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <15000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi new file mode 100644 index 0000000000..637c70adf1 --- /dev/null +++ b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd + * (C) Copyright 2020 David Bauer + */ + +#include "rk3328-u-boot.dtsi" +#include "rk3328-sdram-ddr4-666.dtsi" +/ { + chosen { + u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc; + }; +}; + +&gpio0 { + bootph-pre-ram; +}; + +&pinctrl { + bootph-pre-ram; +}; + +&sdmmc0m1_pin { + bootph-pre-ram; +}; + +&pcfg_pull_up_4ma { + bootph-pre-ram; +}; + +/* Need this and all the pinctrl/gpio stuff above to set pinmux */ +&vcc_sd { + bootph-pre-ram; +}; + +&gmac2io { + snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; +}; + +&spi0 { + spi_flash: spiflash@0 { + bootph-all; + }; +}; diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus.dts b/arch/arm/dts/rk3328-orangepi-r1-plus.dts new file mode 100644 index 0000000000..dc83d74045 --- /dev/null +++ b/arch/arm/dts/rk3328-orangepi-r1-plus.dts @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Based on rk3328-nanopi-r2s.dts, which is: + * Copyright (c) 2020 David Bauer <mail@david-bauer.net> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "rk3328.dtsi" + +/ { + model = "Xunlong Orange Pi R1 Plus"; + compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; + + aliases { + ethernet1 = &rtl8153; + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clk: gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; + pinctrl-names = "default"; + + led-0 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-2 { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; + }; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdmmc0m1_pin>; + pinctrl-names = "default"; + regulator-name = "vcc_sd"; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_5v_lan: vdd-5v-lan-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&lan_vdd_pin>; + pinctrl-names = "default"; + regulator-name = "vdd_5v_lan"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&display_subsystem { + status = "disabled"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; + clock_in_out = "input"; + phy-handle = <&rtl8211e>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-0 = <&rgmiim1_pins>; + pinctrl-names = "default"; + snps,aal; + rx_delay = <0x18>; + tx_delay = <0x24>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211e: ethernet-phy@1 { + reg = <1>; + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio1>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk805-clkout2"; + gpio-controller; + #gpio-cells = <2>; + pinctrl-0 = <&pmic_int_l>; + pinctrl-names = "default"; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_18: LDO_REG1 { + regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc18_emmc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&io_domains { + pmuio-supply = <&vcc_io>; + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_io>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + gmac2io { + eth_phy_reset_pin: eth-phy-reset-pin { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + lan_led_pin: lan-led-pin { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + sys_led_pin: sys-led-pin { + rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lan { + lan_vdd_pin: lan-vdd-pin { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbdrd3 { + dr_mode = "host"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + /* Second port is for USB 3.0 */ + rtl8153: device@2 { + compatible = "usbbda,8153"; + reg = <2>; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm/dts/rk3399-rock-4c-plus.dts b/arch/arm/dts/rk3399-rock-4c-plus.dts index 028eb508ae..8bfd5f88d1 100644 --- a/arch/arm/dts/rk3399-rock-4c-plus.dts +++ b/arch/arm/dts/rk3399-rock-4c-plus.dts @@ -548,9 +548,8 @@ &sdhci { max-frequency = <150000000>; bus-width = <8>; - mmc-hs400-1_8v; + mmc-hs200-1_8v; non-removable; - mmc-hs400-enhanced-strobe; status = "okay"; }; diff --git a/arch/arm/dts/rk3399-rock-4se-u-boot.dtsi b/arch/arm/dts/rk3399-rock-4se-u-boot.dtsi new file mode 100644 index 0000000000..85ee5770ad --- /dev/null +++ b/arch/arm/dts/rk3399-rock-4se-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com> + */ + +#include "rk3399-rock-pi-4-u-boot.dtsi" diff --git a/arch/arm/dts/rk3399-rock-4se.dts b/arch/arm/dts/rk3399-rock-4se.dts new file mode 100644 index 0000000000..7cfc198bba --- /dev/null +++ b/arch/arm/dts/rk3399-rock-4se.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com> + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" +#include "rk3399-t-opp.dtsi" + +/ { + model = "Radxa ROCK 4SE"; + compatible = "radxa,rock-4se", "rockchip,rk3399"; + + aliases { + mmc2 = &sdio0; + }; +}; + +&pinctrl { + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio0 { + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&uart0 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&vcc5v0_host { + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; +}; diff --git a/arch/arm/dts/rk3399-rock-pi-4.dtsi b/arch/arm/dts/rk3399-rock-pi-4.dtsi index 907071d4fe..b1b7f4ffb1 100644 --- a/arch/arm/dts/rk3399-rock-pi-4.dtsi +++ b/arch/arm/dts/rk3399-rock-pi-4.dtsi @@ -9,7 +9,6 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" -#include "rk3399-opp.dtsi" / { aliases { @@ -645,9 +644,9 @@ }; &sdhci { + max-frequency = <150000000>; bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; + mmc-hs200-1_8v; non-removable; status = "okay"; }; diff --git a/arch/arm/dts/rk3399-rock-pi-4a.dts b/arch/arm/dts/rk3399-rock-pi-4a.dts index 89f2af5e11..931334aa3d 100644 --- a/arch/arm/dts/rk3399-rock-pi-4a.dts +++ b/arch/arm/dts/rk3399-rock-pi-4a.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "rk3399-rock-pi-4.dtsi" +#include "rk3399-opp.dtsi" / { model = "Radxa ROCK Pi 4A"; diff --git a/arch/arm/dts/rk3399-rock-pi-4c.dts b/arch/arm/dts/rk3399-rock-pi-4c.dts index 4053ba7261..d32efab74e 100644 --- a/arch/arm/dts/rk3399-rock-pi-4c.dts +++ b/arch/arm/dts/rk3399-rock-pi-4c.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "rk3399-rock-pi-4.dtsi" +#include "rk3399-opp.dtsi" / { model = "Radxa ROCK Pi 4C"; diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi index a18e5d1cf7..f986e1941e 100644 --- a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi +++ b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi @@ -46,7 +46,17 @@ <&pmucru CLK_RTC32K_FRAC>; }; +&dsi_dphy0 { + status = "okay"; +}; + +&dsi0 { + status = "okay"; +}; + &i2c2 { + pinctrl-0 = <&i2c2m1_xfer>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/dts/rk3568-nanopi-r5c-u-boot.dtsi b/arch/arm/dts/rk3568-nanopi-r5c-u-boot.dtsi new file mode 100644 index 0000000000..fe5bc6af47 --- /dev/null +++ b/arch/arm/dts/rk3568-nanopi-r5c-u-boot.dtsi @@ -0,0 +1,3 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rk3568-nanopi-r5s-u-boot.dtsi" diff --git a/arch/arm/dts/rk3568-nanopi-r5c.dts b/arch/arm/dts/rk3568-nanopi-r5c.dts new file mode 100644 index 0000000000..f70ca9f047 --- /dev/null +++ b/arch/arm/dts/rk3568-nanopi-r5c.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3568-nanopi-r5s.dtsi" + +/ { + model = "FriendlyElec NanoPi R5C"; + compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&reset_button_pin>; + + button-reset { + debounce-interval = <50>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + label = "reset"; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>; + + led-lan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; + }; + + power_led: led-power { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "heartbeat"; + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; + }; + + led-wlan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_reset_pin>; + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie3x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie3x2 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + gpio-leds { + lan_led_pin: lan-led-pin { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + power_led_pin: power-led-pin { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_led_pin: wlan-led-pin { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie20_reset_pin: pcie20-reset-pin { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rockchip-key { + reset_button_pin: reset-button-pin { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi new file mode 100644 index 0000000000..0ecca85b20 --- /dev/null +++ b/arch/arm/dts/rk3568-nanopi-r5s-u-boot.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +#include "rk356x-u-boot.dtsi" + +/ { + chosen { + stdout-path = &uart2; + u-boot,spl-boot-order = "same-as-spl", &sdmmc0, &sdhci; + }; +}; + +&sdhci { + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; +}; + +&uart2 { + clock-frequency = <24000000>; + bootph-all; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dts b/arch/arm/dts/rk3568-nanopi-r5s.dts new file mode 100644 index 0000000000..b6ad8328c7 --- /dev/null +++ b/arch/arm/dts/rk3568-nanopi-r5s.dts @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3568-nanopi-r5s.dtsi" + +/ { + model = "FriendlyElec NanoPi R5S"; + compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>; + + led-lan1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; + }; + + led-lan2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; + }; + + power_led: led-power { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "heartbeat"; + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 15ms, 50ms for rtl8211f */ + snps,reset-delays-us = <0 15000 50000>; + tx_delay = <0x3c>; + rx_delay = <0x2f>; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-0 = <ð_phy0_reset_pin>; + pinctrl-names = "default"; + }; +}; + +&pcie2x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +&pcie3x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie3x2 { + num-lanes = <1>; + num-ib-windows = <8>; + num-ob-windows = <8>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + gmac0 { + eth_phy0_reset_pin: eth-phy0-reset-pin { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + lan1_led_pin: lan1-led-pin { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lan2_led_pin: lan2-led-pin { + rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + power_led_pin: power-led-pin { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dtsi b/arch/arm/dts/rk3568-nanopi-r5s.dtsi new file mode 100644 index 0000000000..58ba328ea7 --- /dev/null +++ b/arch/arm/dts/rk3568-nanopi-r5s.dtsi @@ -0,0 +1,590 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + vdd_usbc: vdd-usbc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_usbc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_usbc>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_usbc>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <200000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_usbc>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + pcie30_avdd0v9: pcie30-avdd0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + }; +}; + +&i2c5 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0-usb-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en: vcc5v0-usb-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; + status = "okay"; +}; + +&sdmmc0 { + max-frequency = <150000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1_otg { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi new file mode 100644 index 0000000000..0fc360b06d --- /dev/null +++ b/arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include "rk356x-u-boot.dtsi" + +/ { + chosen { + stdout-path = &uart2; + }; +}; + +&fspi_dual_io_pins { + bootph-all; +}; + +&sdhci { + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; +}; + +&sfc { + bootph-pre-ram; + u-boot,spl-sfc-no-dma; + + flash@0 { + bootph-pre-ram; + }; +}; + +&uart2 { + bootph-all; + clock-frequency = <24000000>; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts new file mode 100644 index 0000000000..59ecf868db --- /dev/null +++ b/arch/arm/dts/rk3568-odroid-m1.dts @@ -0,0 +1,744 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Hardkernel Co., Ltd. + * + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + model = "Hardkernel ODROID-M1"; + compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + i2c0 = &i2c3; + i2c3 = &i2c0; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + serial0 = &uart1; + serial1 = &uart0; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_receiver_pin>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-0 { + gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_RED>; + default-state = "keep"; + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&led_power_pin>; + }; + led_work: led-1 { + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_work_pin>; + }; + }; + + rk809-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_pin>; + simple-audio-card,name = "Analog RK817"; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Headphone", "Headphones", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker", "SPKO"; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + enable-active-high; + gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie_en_pin>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb_host"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en_pin>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb_otg"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en_pin>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0 { + /* Used for USB3 */ + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&combphy1 { + /* Used for USB3 */ + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&combphy2 { + /* used for SATA */ + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii"; + phy-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + status = "okay"; + + tx_delay = <0x4f>; + rx_delay = <0x2d>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pin>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + fspi { + fspi_dual_io_pins: fspi-dual-io-pins { + rockchip,pins = + /* fspi_clk */ + <1 RK_PD0 1 &pcfg_pull_none>, + /* fspi_cs0n */ + <1 RK_PD3 1 &pcfg_pull_none>, + /* fspi_d0 */ + <1 RK_PD1 1 &pcfg_pull_none>, + /* fspi_d1 */ + <1 RK_PD2 1 &pcfg_pull_none>; + }; + }; + + ir-receiver { + ir_receiver_pin: ir-receiver-pin { + /* external pullup to VCC3V3_SYS */ + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_power_pin: led-power-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led_work_pin: led-work-pin { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_reset_pin: pcie-reset-pin { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin { + rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rk809 { + hp_det_pin: hp-det-pin { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr50; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sfc { + /* Dual I/O mode as the D2 pin conflicts with the eMMC */ + pinctrl-0 = <&fspi_dual_io_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0x0 0xe0000>; + }; + partition@e0000 { + label = "U-Boot Env"; + reg = <0xe0000 0x20000>; + }; + partition@100000 { + label = "U-Boot"; + reg = <0x100000 0x200000>; + }; + partition@300000 { + label = "splash"; + reg = <0x300000 0x100000>; + }; + partition@400000 { + label = "Filesystem"; + reg = <0x400000 0xc00000>; + }; + }; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi index bbf54f888f..9ee7b494ee 100644 --- a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi +++ b/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi @@ -36,8 +36,22 @@ bootph-all; }; +&pcie2x1 { + pinctrl-0 = <&pcie20m1_pins &pcie_reset_h>; +}; + +&pcie3x2 { + pinctrl-0 = <&pcie30x2m1_pins &pcie3x2_reset_h>; +}; + &pinctrl { bootph-all; + + pcie { + pcie3x2_reset_h: pcie3x2-reset-h { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pcfg_pull_none { diff --git a/arch/arm/dts/rk3568.dtsi b/arch/arm/dts/rk3568.dtsi index ba67b58f05..f1be76a54c 100644 --- a/arch/arm/dts/rk3568.dtsi +++ b/arch/arm/dts/rk3568.dtsi @@ -94,9 +94,10 @@ power-domains = <&power RK3568_PD_PIPE>; reg = <0x3 0xc0400000 0x0 0x00400000>, <0x0 0xfe270000 0x0 0x00010000>, - <0x3 0x7f000000 0x0 0x01000000>; - ranges = <0x01000000 0x0 0x3ef00000 0x3 0x7ef00000 0x0 0x00100000>, - <0x02000000 0x0 0x00000000 0x3 0x40000000 0x0 0x3ef00000>; + <0x0 0xf2000000 0x0 0x00100000>; + ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, + <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>, + <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>; reg-names = "dbi", "apb", "config"; resets = <&cru SRST_PCIE30X1_POWERUP>; reset-names = "pipe"; @@ -146,9 +147,10 @@ power-domains = <&power RK3568_PD_PIPE>; reg = <0x3 0xc0800000 0x0 0x00400000>, <0x0 0xfe280000 0x0 0x00010000>, - <0x3 0xbf000000 0x0 0x01000000>; - ranges = <0x01000000 0x0 0x3ef00000 0x3 0xbef00000 0x0 0x00100000>, - <0x02000000 0x0 0x00000000 0x3 0x80000000 0x0 0x3ef00000>; + <0x0 0xf0000000 0x0 0x00100000>; + ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, + <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>, + <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>; reg-names = "dbi", "apb", "config"; resets = <&cru SRST_PCIE30X2_POWERUP>; reset-names = "pipe"; diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi index 6492ace0de..e0591c194b 100644 --- a/arch/arm/dts/rk356x.dtsi +++ b/arch/arm/dts/rk356x.dtsi @@ -951,7 +951,7 @@ compatible = "rockchip,rk3568-pcie"; reg = <0x3 0xc0000000 0x0 0x00400000>, <0x0 0xfe260000 0x0 0x00010000>, - <0x3 0x3f000000 0x0 0x01000000>; + <0x0 0xf4000000 0x0 0x00100000>; reg-names = "dbi", "apb", "config"; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, @@ -980,8 +980,9 @@ phys = <&combphy2 PHY_TYPE_PCIE>; phy-names = "pcie-phy"; power-domains = <&power RK3568_PD_PIPE>; - ranges = <0x01000000 0x0 0x3ef00000 0x3 0x3ef00000 0x0 0x00100000 - 0x02000000 0x0 0x00000000 0x3 0x00000000 0x0 0x3ef00000>; + ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>, + <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>, + <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>; resets = <&cru SRST_PCIE20_POWERUP>; reset-names = "pipe"; #address-cells = <3>; diff --git a/arch/arm/dts/rk3588-edgeble-neu6b-io-u-boot.dtsi b/arch/arm/dts/rk3588-edgeble-neu6b-io-u-boot.dtsi new file mode 100644 index 0000000000..cd7626b24b --- /dev/null +++ b/arch/arm/dts/rk3588-edgeble-neu6b-io-u-boot.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +#include "rk3588j-u-boot.dtsi" + +/ { + aliases { + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = &uart2; + u-boot,spl-boot-order = &sdmmc; + }; +}; + +&sdmmc { + bus-width = <4>; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588-edgeble-neu6b-io.dts b/arch/arm/dts/rk3588-edgeble-neu6b-io.dts new file mode 100644 index 0000000000..e9d5a8bab5 --- /dev/null +++ b/arch/arm/dts/rk3588-edgeble-neu6b-io.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd. + */ + +/dts-v1/; +#include "rk3588j.dtsi" +#include "rk3588-edgeble-neu6b.dtsi" + +/ { + model = "Edgeble Neu6B IO Board"; + compatible = "edgeble,neural-compute-module-6b-io", + "edgeble,neural-compute-module-6b", "rockchip,rk3588"; + + aliases { + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588-edgeble-neu6b.dtsi b/arch/arm/dts/rk3588-edgeble-neu6b.dtsi new file mode 100644 index 0000000000..1c5bcf1280 --- /dev/null +++ b/arch/arm/dts/rk3588-edgeble-neu6b.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd. + */ + +/ { + compatible = "edgeble,neural-compute-module-6b", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi index 1cd8a57a6f..5a32926996 100644 --- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi +++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/usb/pd.h> / { aliases { @@ -18,6 +19,25 @@ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci; }; + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_usbdcin: vcc5v0-usbdcin { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; @@ -29,6 +49,28 @@ pinctrl-0 = <&vcc5v0_host_en>; vin-supply = <&vcc5v0_sys>; }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; + + vbus5v0_typec: vbus5v0-typec { + compatible = "regulator-fixed"; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc5v0_usb>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + }; }; &combphy0_ps { @@ -85,6 +127,16 @@ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb-typec { + usbc0_int: usbc0-int { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + typec5v_pwren: typec5v-pwren { + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pcfg_pull_none { @@ -168,6 +220,15 @@ status = "okay"; }; +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + rockchip,typec-vbus-det; + status = "okay"; +}; + &u2phy2 { resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>; reset-names = "phy", "apb"; @@ -209,3 +270,139 @@ status = "okay"; }; +&usbdp_phy0 { + orientation-switch; + svid = <0xff01>; + sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + usbdp_phy0_orientation_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_orien_sw>; + }; + + usbdp_phy0_dp_altmode_mux: endpoint@1 { + reg = <1>; + remote-endpoint = <&dp_altmode_mux>; + }; + }; +}; + +&usbdp_phy0_u3 { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; + usb-role-switch; + + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_0_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_role_sw>; + }; + }; +}; + +&usbdp_phy1 { + rockchip,dp-lane-mux = <2 3>; + status = "okay"; +}; + +&usbdp_phy1_u3 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&i2c4 { + pinctrl-0 = <&i2c4m1_xfer>; + status = "okay"; + + usbc0: fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&vbus5v0_typec>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_role_sw: endpoint@0 { + remote-endpoint = <&dwc3_0_role_switch>; + }; + }; + }; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + op-sink-microwatt = <1000000>; + sink-pdos = + <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + + altmodes { + #address-cells = <1>; + #size-cells = <0>; + + altmode@0 { + reg = <0>; + svid = <0xff01>; + vdo = <0xffffffff>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usbc0_orien_sw: endpoint { + remote-endpoint = <&usbdp_phy0_orientation_switch>; + }; + }; + + port@1 { + reg = <1>; + dp_altmode_mux: endpoint { + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + }; + }; + }; + }; + }; +}; + diff --git a/arch/arm/dts/rk3588-rock-5b.dts b/arch/arm/dts/rk3588-rock-5b.dts index 95805cb0ad..3e4aee8f70 100644 --- a/arch/arm/dts/rk3588-rock-5b.dts +++ b/arch/arm/dts/rk3588-rock-5b.dts @@ -2,6 +2,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "rk3588.dtsi" / { @@ -17,6 +18,31 @@ stdout-path = "serial2:1500000n8"; }; + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + sound { + compatible = "audio-graph-card"; + label = "Analog"; + + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + + dais = <&i2s0_8ch_p0>; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + }; + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -27,6 +53,132 @@ }; }; +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + &sdhci { bus-width = <8>; no-sdio; diff --git a/arch/arm/dts/rk3588-u-boot.dtsi b/arch/arm/dts/rk3588-u-boot.dtsi index 4c8ac804d6..68b419f3ab 100644 --- a/arch/arm/dts/rk3588-u-boot.dtsi +++ b/arch/arm/dts/rk3588-u-boot.dtsi @@ -5,3 +5,96 @@ #include "rockchip-u-boot.dtsi" #include "rk3588s-u-boot.dtsi" + +/ { + usbdrd3_1: usbdrd3_1 { + compatible = "rockchip,rk3588-dwc3", "rockchip,rk3399-dwc3"; + clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>, + <&cru ACLK_USB3OTG1>; + clock-names = "ref", "suspend", "bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usbdrd_dwc3_1: usb@fc400000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfc400000 0x0 0x400000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG1>; + reset-names = "usb3-otg"; + dr_mode = "host"; + phys = <&u2phy1_otg>, <&usbdp_phy1_u3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + }; + }; + + usbdpphy1_grf: syscon@fd5cc000 { + compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; + reg = <0x0 0xfd5cc000 0x0 0x4000>; + }; + + usb2phy1_grf: syscon@fd5d4000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", + "simple-mfd"; + reg = <0x0 0xfd5d4000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy1: usb2-phy@4000 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x4000 0x10>; + interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>; + reset-names = "phy", "apb"; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy1"; + #clock-cells = <0>; + rockchip,usbctrl-grf = <&usb_grf>; + status = "disabled"; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + usbdp_phy1: phy@fed90000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0x0 0xfed90000 0x0 0x10000>; + rockchip,u2phy-grf = <&usb2phy1_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy1_grf>; + rockchip,vo-grf = <&vo0_grf>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY1_IMMORTAL>, + <&cru PCLK_USBDPPHY1>, + <&u2phy1>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>, + <&cru SRST_USBDP_COMBO_PHY1_CMN>, + <&cru SRST_USBDP_COMBO_PHY1_LANE>, + <&cru SRST_USBDP_COMBO_PHY1_PCS>, + <&cru SRST_P_USBDPPHY1>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + status = "disabled"; + + usbdp_phy1_dp: dp-port { + #phy-cells = <0>; + status = "disabled"; + }; + + usbdp_phy1_u3: usb3-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/dts/rk3588.dtsi b/arch/arm/dts/rk3588.dtsi index d085e57fbc..8be75556af 100644 --- a/arch/arm/dts/rk3588.dtsi +++ b/arch/arm/dts/rk3588.dtsi @@ -7,6 +7,74 @@ #include "rk3588-pinctrl.dtsi" / { + i2s8_8ch: i2s@fddc8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc8000 0x0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 22>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S8_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s6_8ch: i2s@fddf4000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf4000 0x0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 4>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S6_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s7_8ch: i2s@fddf8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf8000 0x0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 21>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S7_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s10_8ch: i2s@fde00000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfde00000 0x0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 24>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S10_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gmac0: ethernet@fe1b0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1b0000 0x0 0x10000>; diff --git a/arch/arm/dts/rk3588j-u-boot.dtsi b/arch/arm/dts/rk3588j-u-boot.dtsi new file mode 100644 index 0000000000..f5c9e329a5 --- /dev/null +++ b/arch/arm/dts/rk3588j-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +#include "rk3588-u-boot.dtsi" diff --git a/arch/arm/dts/rk3588j.dtsi b/arch/arm/dts/rk3588j.dtsi new file mode 100644 index 0000000000..38b9dbf38a --- /dev/null +++ b/arch/arm/dts/rk3588j.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Rockchip Electronics Co., Ltd. + * + */ + +#include "rk3588.dtsi" diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi index c703e41802..acb1cfe200 100644 --- a/arch/arm/dts/rk3588s-u-boot.dtsi +++ b/arch/arm/dts/rk3588s-u-boot.dtsi @@ -13,6 +13,37 @@ status = "okay"; }; + usbdrd3_0: usbdrd3_0 { + compatible = "rockchip,rk3588-dwc3", "rockchip,rk3399-dwc3"; + clocks = <&cru REF_CLK_USB3OTG0>, <&cru SUSPEND_CLK_USB3OTG0>, + <&cru ACLK_USB3OTG0>; + clock-names = "ref", "suspend", "bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usbdrd_dwc3_0: usb@fc000000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfc000000 0x0 0x400000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&power RK3588_PD_USB>; + resets = <&cru SRST_A_USB3OTG0>; + reset-names = "usb3-otg"; + dr_mode = "otg"; + phys = <&u2phy0_otg>, <&usbdp_phy0_u3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis-del-phy-power-chg-quirk; + snps,dis-tx-ipgap-linecheck-quirk; + quirk-skip-phy-init; + }; + }; + usb_host0_ehci: usb@fc800000 { compatible = "generic-ehci"; reg = <0x0 0xfc800000 0x0 0x40000>; @@ -64,6 +95,33 @@ reg = <0x0 0xfd5bc000 0x0 0x100>; }; + usb2phy0_grf: syscon@fd5d0000 { + compatible = "rockchip,rk3588-usb2phy-grf", "syscon", + "simple-mfd"; + reg = <0x0 0xfd5d0000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy0: usb2-phy@0 { + compatible = "rockchip,rk3588-usb2phy"; + reg = <0x0 0x10>; + interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&cru SRST_OTGPHY_U3_0>, <&cru SRST_P_USB2PHY_U3_0_GRF0>; + reset-names = "phy", "apb"; + clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy0"; + #clock-cells = <0>; + rockchip,usbctrl-grf = <&usb_grf>; + status = "disabled"; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + usb2phy2_grf: syscon@fd5d8000 { compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; @@ -87,6 +145,17 @@ }; }; + vo0_grf: syscon@fd5a6000 { + compatible = "rockchip,rk3588-vo-grf", "syscon"; + reg = <0x0 0xfd5a6000 0x0 0x2000>; + clocks = <&cru PCLK_VO0GRF>; + }; + + usb_grf: syscon@fd5ac000 { + compatible = "rockchip,rk3588-usb-grf", "syscon"; + reg = <0x0 0xfd5ac000 0x0 0x4000>; + }; + usb2phy3_grf: syscon@fd5dc000 { compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd"; @@ -110,6 +179,11 @@ }; }; + usbdpphy0_grf: syscon@fd5c8000 { + compatible = "rockchip,rk3588-usbdpphy-grf", "syscon"; + reg = <0x0 0xfd5c8000 0x0 0x4000>; + }; + pcie2x1l2: pcie@fe190000 { compatible = "rockchip,rk3588-pcie", "snps,dw-pcie"; #address-cells = <3>; @@ -174,24 +248,43 @@ status = "disabled"; }; - otp: nvmem@fecc0000 { - compatible = "rockchip,rk3588-otp"; - reg = <0x0 0xfecc0000 0x0 0x400>; - #address-cells = <1>; - #size-cells = <1>; - status = "okay"; - - cpu_id: id@7 { - reg = <0x07 0x10>; - }; - }; - rng: rng@fe378000 { compatible = "rockchip,trngv1"; reg = <0x0 0xfe378000 0x0 0x200>; status = "disabled"; }; + usbdp_phy0: phy@fed80000 { + compatible = "rockchip,rk3588-usbdp-phy"; + reg = <0x0 0xfed80000 0x0 0x10000>; + rockchip,u2phy-grf = <&usb2phy0_grf>; + rockchip,usb-grf = <&usb_grf>; + rockchip,usbdpphy-grf = <&usbdpphy0_grf>; + rockchip,vo-grf = <&vo0_grf>; + clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>, + <&cru CLK_USBDP_PHY0_IMMORTAL>, + <&cru PCLK_USBDPPHY0>, + <&u2phy0>; + clock-names = "refclk", "immortal", "pclk", "utmi"; + resets = <&cru SRST_USBDP_COMBO_PHY0_INIT>, + <&cru SRST_USBDP_COMBO_PHY0_CMN>, + <&cru SRST_USBDP_COMBO_PHY0_LANE>, + <&cru SRST_USBDP_COMBO_PHY0_PCS>, + <&cru SRST_P_USBDPPHY0>; + reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb"; + status = "disabled"; + + usbdp_phy0_dp: dp-port { + #phy-cells = <0>; + status = "disabled"; + }; + + usbdp_phy0_u3: usb3-port { + #phy-cells = <0>; + status = "disabled"; + }; + }; + combphy0_ps: phy@fee00000 { compatible = "rockchip,rk3588-naneng-combphy"; reg = <0x0 0xfee00000 0x0 0x100>; diff --git a/arch/arm/dts/rk3588s.dtsi b/arch/arm/dts/rk3588s.dtsi index fca8503aed..7dbac9ae2e 100644 --- a/arch/arm/dts/rk3588s.dtsi +++ b/arch/arm/dts/rk3588s.dtsi @@ -60,6 +60,8 @@ enable-method = "psci"; capacity-dmips-mhz = <530>; clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <32768>; i-cache-line-size = <64>; @@ -136,6 +138,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -174,6 +178,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -222,6 +228,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -230,6 +238,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -238,6 +248,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -246,6 +258,8 @@ cache-size = <131072>; cache-line-size = <64>; cache-sets = <512>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -254,6 +268,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -262,6 +278,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -270,6 +288,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -278,6 +298,8 @@ cache-size = <524288>; cache-line-size = <64>; cache-sets = <1024>; + cache-level = <2>; + cache-unified; next-level-cache = <&l3_cache>; }; @@ -286,6 +308,8 @@ cache-size = <3145728>; cache-line-size = <64>; cache-sets = <4096>; + cache-level = <3>; + cache-unified; }; }; @@ -304,10 +328,6 @@ scmi_clk: protocol@14 { reg = <0x14>; - assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>, - <&scmi_clk SCMI_CLK_CPUB23>; - assigned-clock-rates = <1200000000>, - <1200000000>; #clock-cells = <1>; }; @@ -414,7 +434,7 @@ <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>, <&cru CLK_GPU>; assigned-clock-rates = - <100000000>, <786432000>, + <1100000000>, <786432000>, <850000000>, <1188000000>, <702000000>, <400000000>, <500000000>, @@ -1132,6 +1152,103 @@ status = "disabled"; }; + i2s0_8ch: i2s@fe470000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe470000 0x0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdi1 + &i2s0_sdi2 + &i2s0_sdi3 + &i2s0_sdo0 + &i2s0_sdo1 + &i2s0_sdo2 + &i2s0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1_8ch: i2s@fe480000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe480000 0x0 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_lrck + &i2s1m0_sclk + &i2s1m0_sdi0 + &i2s1m0_sdi1 + &i2s1m0_sdi2 + &i2s1m0_sdi3 + &i2s1m0_sdo0 + &i2s1m0_sdo1 + &i2s1m0_sdo2 + &i2s1m0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2_2ch: i2s@fe490000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe490000 0x0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 0>, <&dmac1 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2m1_lrck + &i2s2m1_sclk + &i2s2m1_sdi + &i2s2m1_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s3_2ch: i2s@fe4a0000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe4a0000 0x0 0x1000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S3_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 2>, <&dmac1 3>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s3_lrck + &i2s3_sclk + &i2s3_sdi + &i2s3_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@fe600000 { compatible = "arm,gic-v3"; reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ @@ -1141,7 +1258,24 @@ mbi-alias = <0x0 0xfe610000>; mbi-ranges = <424 56>; msi-controller; + ranges; + #address-cells = <2>; #interrupt-cells = <4>; + #size-cells = <2>; + + its0: msi-controller@fe640000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe640000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; + + its1: msi-controller@fe660000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0xfe660000 0x0 0x20000>; + msi-controller; + #msi-cells = <1>; + }; ppi-partitions { ppi_partition0: interrupt-partition-0 { @@ -1241,6 +1375,22 @@ status = "disabled"; }; + timer0: timer@feae0000 { + compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer"; + reg = <0x0 0xfeae0000 0x0 0x20>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>; + clock-names = "pclk", "timer"; + }; + + wdt: watchdog@feaf0000 { + compatible = "rockchip,rk3588-wdt", "snps,dw-wdt"; + reg = <0x0 0xfeaf0000 0x0 0x100>; + clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>; + }; + spi0: spi@feb00000 { compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; reg = <0x0 0xfeb00000 0x0 0x1000>; @@ -1572,6 +1722,26 @@ status = "disabled"; }; + tsadc: tsadc@fec00000 { + compatible = "rockchip,rk3588-tsadc"; + reg = <0x0 0xfec00000 0x0 0x400>; + interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + assigned-clocks = <&cru CLK_TSADC>; + assigned-clock-rates = <2000000>; + resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>; + reset-names = "tsadc-apb", "tsadc"; + rockchip,hw-tshut-temp = <120000>; + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + pinctrl-0 = <&tsadc_gpio_func>; + pinctrl-1 = <&tsadc_shut>; + pinctrl-names = "gpio", "otpout"; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + i2c6: i2c@fec80000 { compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; reg = <0x0 0xfec80000 0x0 0x1000>; @@ -1627,6 +1797,60 @@ status = "disabled"; }; + otp: efuse@fecc0000 { + compatible = "rockchip,rk3588-otp"; + reg = <0x0 0xfecc0000 0x0 0x400>; + clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>, + <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>; + clock-names = "otp", "apb_pclk", "phy", "arb"; + resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>, + <&cru SRST_OTPC_ARB>; + reset-names = "otp", "apb", "arb"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_code: cpu-code@2 { + reg = <0x02 0x2>; + }; + + otp_id: id@7 { + reg = <0x07 0x10>; + }; + + cpub0_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + + cpub1_leakage: cpu-leakage@18 { + reg = <0x18 0x1>; + }; + + cpul_leakage: cpu-leakage@19 { + reg = <0x19 0x1>; + }; + + log_leakage: log-leakage@1a { + reg = <0x1a 0x1>; + }; + + gpu_leakage: gpu-leakage@1b { + reg = <0x1b 0x1>; + }; + + otp_cpu_version: cpu-version@1c { + reg = <0x1c 0x1>; + bits = <3 3>; + }; + + npu_leakage: npu-leakage@28 { + reg = <0x28 0x1>; + }; + + codec_leakage: codec-leakage@29 { + reg = <0x29 0x1>; + }; + }; + dmac2: dma-controller@fed10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xfed10000 0x0 0x4000>; diff --git a/arch/arm/dts/rockchip-optee.dtsi b/arch/arm/dts/rockchip-optee.dtsi deleted file mode 100644 index d84c10cf43..0000000000 --- a/arch/arm/dts/rockchip-optee.dtsi +++ /dev/null @@ -1,64 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2020 Google LLC - */ - -#include <config.h> - -#if defined(CONFIG_HAS_ROM) && defined(CONFIG_FIT) -&binman { - itb { - filename = "u-boot.itb"; - fit { - fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; - description = "FIT image with OP-TEE support"; - #address-cells = <1>; - - images { - uboot { - description = "U-Boot"; - type = "standalone"; - os = "U-Boot"; - arch = "arm"; - compression = "none"; - load = <CONFIG_TEXT_BASE>; - - u-boot-nodtb { - }; - }; - optee { - description = "OP-TEE"; - type = "firmware"; - arch = "arm"; - os = "tee"; - compression = "none"; - load = <(CFG_SYS_SDRAM_BASE + 0x8400000)>; - entry = <(CFG_SYS_SDRAM_BASE + 0x8400000)>; - - blob-ext { - filename = "tee.bin"; - }; - }; - fdt { - description = CONFIG_SYS_BOARD; - type = "flat_dt"; - compression = "none"; - - u-boot-dtb { - }; - }; - }; - - configurations { - default = "conf"; - conf { - description = CONFIG_SYS_BOARD; - firmware = "optee"; - loadables = "uboot"; - fdt = "fdt"; - }; - }; - }; - }; -}; -#endif diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi index 2878b80926..be2658e8ef 100644 --- a/arch/arm/dts/rockchip-u-boot.dtsi +++ b/arch/arm/dts/rockchip-u-boot.dtsi @@ -33,9 +33,13 @@ }; }; -#if defined(CONFIG_SPL_FIT) && defined(CONFIG_ARM64) +#if defined(CONFIG_SPL_FIT) && (defined(CONFIG_ARM64) || defined(CONFIG_SPL_OPTEE_IMAGE)) fit: fit { +#ifdef CONFIG_ARM64 description = "FIT image for U-Boot with bl31 (TF-A)"; +#else + description = "FIT image with OP-TEE"; +#endif #address-cells = <1>; fit,fdt-list = "of-list"; filename = "u-boot.itb"; @@ -44,10 +48,14 @@ offset = <CONFIG_SPL_PAD_TO>; images { u-boot { - description = "U-Boot (64-bit)"; + description = "U-Boot"; type = "standalone"; os = "U-Boot"; +#ifdef CONFIG_ARM64 arch = "arm64"; +#else + arch = "arm"; +#endif compression = "none"; load = <CONFIG_TEXT_BASE>; entry = <CONFIG_TEXT_BASE>; @@ -60,6 +68,7 @@ #endif }; +#ifdef CONFIG_ARM64 @atf-SEQ { fit,operation = "split-elf"; description = "ARM Trusted Firmware"; @@ -99,6 +108,25 @@ }; #endif }; +#else + op-tee { + description = "OP-TEE"; + type = "tee"; + arch = "arm"; + os = "tee"; + compression = "none"; + load = <(CFG_SYS_SDRAM_BASE + 0x8400000)>; + entry = <(CFG_SYS_SDRAM_BASE + 0x8400000)>; + + tee-os { + }; +#ifdef CONFIG_SPL_FIT_SIGNATURE + hash { + algo = "sha256"; + }; +#endif + }; +#endif @fdt-SEQ { description = "fdt-NAME"; @@ -117,7 +145,11 @@ @config-SEQ { description = "NAME.dtb"; fdt = "fdt-SEQ"; +#ifdef CONFIG_ARM64 fit,firmware = "atf-1", "u-boot"; +#else + fit,firmware = "op-tee", "u-boot"; +#endif fit,loadables; }; }; @@ -150,7 +182,7 @@ }; }; -#ifdef CONFIG_ARM64 +#if defined(CONFIG_ARM64) || defined(CONFIG_SPL_OPTEE_IMAGE) fit { type = "blob"; filename = "u-boot.itb"; diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 9d6d20bf8e..07b5595dac 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -106,6 +106,7 @@ config ROCKCHIP_RK322X imply ROCKCHIP_COMMON_BOARD imply SPL_SERIAL imply SPL_ROCKCHIP_COMMON_BOARD + select SPL_OPTEE_IMAGE if SPL_FIT imply TPL_SERIAL imply TPL_ROCKCHIP_COMMON_BOARD select TPL_LIBCOMMON_SUPPORT @@ -250,7 +251,6 @@ config ROCKCHIP_RK3399 imply PRE_CONSOLE_BUFFER imply ROCKCHIP_COMMON_BOARD imply ROCKCHIP_SDRAM_COMMON - imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF imply SPL_ROCKCHIP_COMMON_BOARD imply TPL_SERIAL imply TPL_LIBCOMMON_SUPPORT diff --git a/arch/arm/mach-rockchip/rk3568/Kconfig b/arch/arm/mach-rockchip/rk3568/Kconfig index 94e04b79e7..f46be3d081 100644 --- a/arch/arm/mach-rockchip/rk3568/Kconfig +++ b/arch/arm/mach-rockchip/rk3568/Kconfig @@ -17,6 +17,11 @@ config TARGET_ANBERNIC_RGXX3_RK3566 and RG503. The correct device tree name will automatically be selected by the bootloader. +config TARGET_ODROID_M1_RK3568 + bool "ODROID-M1" + help + Hardkernel ODROID-M1 single board computer with a RK3568B2 SoC. + endchoice config ROCKCHIP_BOOT_MODE_REG @@ -29,9 +34,10 @@ config SYS_SOC default "rk3568" config SYS_MALLOC_F_LEN - default 0x2000 + default 0x20000 source "board/rockchip/evb_rk3568/Kconfig" source "board/anbernic/rgxx3_rk3566/Kconfig" +source "board/hardkernel/odroid_m1/Kconfig" endif diff --git a/arch/arm/mach-rockchip/rk3588/Kconfig b/arch/arm/mach-rockchip/rk3588/Kconfig index b7d5f13beb..d72ef92f2e 100644 --- a/arch/arm/mach-rockchip/rk3588/Kconfig +++ b/arch/arm/mach-rockchip/rk3588/Kconfig @@ -10,15 +10,25 @@ config TARGET_RK3588_NEU6 bool "Edgeble Neural Compute Module 6(Neu6) SoM" select BOARD_LATE_INIT help - Neu6: - Neural Compute Module 6A(Neu6a) is a 96boards SoM-CB compute module + Neu6A: + Neural Compute Module 6A(Neu6A) is a 96boards SoM-CB compute module based on Rockchip RK3588 from Edgeble AI. - Neu6-IO: - Neural Compute Module 6(Neu6) IO board is an industrial form factor + Neu6A-IO: + Neural Compute Module 6A(Neu6A) IO board is an industrial form factor IO board and Neu6a needs to mount on top of this IO board in order to - create complete Edgeble Neural Compute Module 6(Neu6) IO platform. + create complete Edgeble Neural Compute Module 6A(Neu6A) IO platform. + Neu6B: + Neural Compute Module 6B(Neu6B) is a 96boards SoM-CB compute module + based on Rockchip RK3588J from Edgeble AI. + + Neu6A-IO: + Neural Compute Module 6B(Neu6B) IO board is an industrial form factor + IO board and Neu6a needs to mount on top of this IO board in order to + create complete Edgeble Neural Compute Module 6B(Neu6B) IO platform. + +config TARGET_ROCK5B_RK3588 config TARGET_ROCK5B_RK3588 bool "Radxa ROCK5B RK3588 board" select BOARD_LATE_INIT |