1 files changed, 3 insertions, 63 deletions
diff --git a/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c b/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c
index 82856f7a08..ff89333b73 100644
--- a/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c
+++ b/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c
@@ -5,76 +5,16 @@
 
 #include <common.h>
 #include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
 #include <asm/io.h>
-#include <asm/mach-imx/boot_mode.h>
 #include <dm.h>
 #include <dm/device-internal.h>
-#include <i2c_eeprom.h>
 #include <malloc.h>
-#include <net.h>
 #include <spl.h>
 
-#include "lpddr4_timing.h"
+#include "../common/common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int board_phys_sdram_size(phys_size_t *size)
-{
-	u8 memcfg = dmo_get_memcfg();
-
-	*size = (4ULL >> ((memcfg >> 1) & 0x3)) * SZ_1G;
-
-	return 0;
-}
-
-static void setup_mac_address(void)
-{
-	unsigned char enetaddr[6];
-	struct udevice *dev;
-	int off, ret;
-
-	ret = eth_env_get_enetaddr("ethaddr", enetaddr);
-	if (ret)	/* ethaddr is already set */
-		return;
-
-	off = fdt_path_offset(gd->fdt_blob, "eeprom0");
-	if (off < 0) {
-		printf("%s: No eeprom0 path offset\n", __func__);
-		return;
-	}
-
-	ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev);
-	if (ret) {
-		printf("Cannot find EEPROM!\n");
-		return;
-	}
-
-	ret = i2c_eeprom_read(dev, 0xb0, enetaddr, 0x6);
-	if (ret) {
-		printf("Error reading configuration EEPROM!\n");
-		return;
-	}
-
-	if (is_valid_ethaddr(enetaddr))
-		eth_env_set_enetaddr("ethaddr", enetaddr);
-}
-
-static void setup_boot_device(void)
-{
-	int boot_device = get_boot_device();
-	char *devnum;
-
-	devnum = env_get("devnum");
-	if (devnum)	/* devnum is already set */
-		return;
-
-	if (boot_device == MMC3_BOOT)	/* eMMC */
-		env_set_ulong("devnum", 0);
-	else
-		env_set_ulong("devnum", 1);
-}
-
 int board_init(void)
 {
 	return 0;
@@ -85,8 +25,8 @@ int board_late_init(void)
 	struct udevice *dev;
 	int ret;
 
-	setup_boot_device();
-	setup_mac_address();
+	dmo_setup_boot_device();
+	dmo_setup_mac_address();
 
 	ret = uclass_get_device_by_name(UCLASS_MISC, "usb-hub@2c", &dev);
 	if (ret)