diff options
Diffstat (limited to 'board/freescale/mx6ullevk/README')
| -rw-r--r-- | board/freescale/mx6ullevk/README | 36 |
1 files changed, 0 insertions, 36 deletions
diff --git a/board/freescale/mx6ullevk/README b/board/freescale/mx6ullevk/README deleted file mode 100644 index 47a35f61a2..0000000000 --- a/board/freescale/mx6ullevk/README +++ /dev/null @@ -1,36 +0,0 @@ -How to use U-Boot on Freescale MX6ULL 14x14 EVK ----------------------------------------------- - -- First make sure you have installed the dtc package (device tree compiler): - -$ sudo apt-get install device-tree-compiler - -- Build U-Boot for MX6ULL 14x14 EVK: - -$ make mrproper -$ make mx6ull_14x14_evk_defconfig -$ make - -This generates the u-boot-dtb.imx image in the current directory. - -- Flash the u-boot-dtb.imx image into the micro SD card: - -$ sudo dd if=u-boot-dtb.imx of=/dev/sdb bs=1K seek=1 conv=notrunc && sync - -- Jumper settings: - -SW601: 0 0 1 0 -Sw602: 1 0 - -Where 0 means bottom position and 1 means top position (from the switch label -numbers reference). - -Connect the USB cable between the EVK and the PC for the console. -(The USB console connector is the one close the push buttons) - -Insert the micro SD card in the board, power it up and U-Boot messages should -come up. - -The link for the board: http://www.nxp.com/products/microcontrollers-and- \ -processors/arm-processors/i.mx-applications-processors/i.mx-6-processors/ \ -i.mx6qp/evaluation-kit-for-the-i.mx-6ull-applications-processor:MCIMX6ULL-EVK |