diff options
Diffstat (limited to 'board/freescale/t208xqds/README')
-rwxr-xr-x | board/freescale/t208xqds/README | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README index d690857f2e..b52d9610e9 100755 --- a/board/freescale/t208xqds/README +++ b/board/freescale/t208xqds/README @@ -55,14 +55,14 @@ Memory: - Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support Ethernet interfaces: - Two 1Gbps RGMII on-board ports - - Four 10Gbps XFI on-board cages + - Four 10GBase-R on-board cages - 1Gbps/2.5Gbps SGMII Riser card - 10Gbps XAUI Riser card Accelerator: - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC SerDes: - 16 lanes up to 10.3125GHz - - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI + - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, 10GBase-R and XAUI IFC: - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA eSPI: @@ -85,14 +85,14 @@ System Logic: - QIXIS-II FPGA system controll Debug Features: - Support Legacy, COP/JTAG, Aurora, Event and EVT -XFI: - - XFI is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to +10GBase-R: + - 10GBase-R is supported on T2080QDS through Lane A/B/C/D on Serdes 1 routed to a on-board SFP+ cages, which to house optical module (fiber cable) or direct attach cable(copper), the copper cable is used to emulate 10GBASE-KR scenario. - So, for XFI usage, there are two scenarios, one will use fiber cable, + So, for 10GBase-R usage, there are two scenarios, one will use fiber cable, another will use copper cable. An hwconfig env "fsl_10gkr_copper" is - introduced to indicate a XFI port will use copper cable, and U-Boot + introduced to indicate a 10GBase-R port will use copper cable, and U-Boot will fixup the dtb accordingly. It's used as: fsl_10gkr_copper:<10g_mac_name> The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm1_10g3, fm1_10g4, they @@ -100,10 +100,10 @@ XFI: "fsl_10gkr_copper", it will use copper cable, otherwise, fiber cable will be used by default. for ex. set "fsl_10gkr_copper:fm1_10g1,fm1_10g2,fm1_10g3,fm1_10g4" in - hwconfig, then both four XFI ports will use copper cable. + hwconfig, then both four 10GBase-R ports will use copper cable. set "fsl_10gkr_copper:fm1_10g1,fm1_10g2" in hwconfig, then first two - XFI ports will use copper cable, the other two XFI ports will use fiber - cable. + 10GBase-R ports will use copper cable, the other two 10GBase-R ports will use + fiber cable. 1000BASE-KX(1G-KX): - T2080QDS can support 1G-KX by using SGMII protocol, but serdes lane runs in 1G-KX mode. By default, the lane runs in SGMII mode, to set a lane |