diff options
Diffstat (limited to 'board/kobol/helios4/README')
-rw-r--r-- | board/kobol/helios4/README | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/board/kobol/helios4/README b/board/kobol/helios4/README index 749f048278..d615cdd264 100644 --- a/board/kobol/helios4/README +++ b/board/kobol/helios4/README @@ -7,12 +7,12 @@ $ make helios4_defconfig $ make The resulting image including the SPL binary with the -full DDR setup is "u-boot-spl.kwb". +full DDR setup is "u-boot-with-spl.kwb". Now all you need to do is copy this image on a SD card. For example with this command: -$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 +$ sudo dd if=u-boot-with-spl.kwb of=/dev/sdX bs=512 seek=1 Please use the correct device node for your setup instead of "/dev/sdX" here! @@ -38,7 +38,7 @@ Set the SW1 DIP switches to UART boot (see above). Run the following command to initiate U-Boot download: - ./tools/kwboot -p -b u-boot-spl.kwb /dev/ttyUSBX + ./tools/kwboot -p -b u-boot-with-spl.kwb /dev/ttyUSBX Use the correct UART device node for /dev/ttyUSBX. |