diff options
Diffstat (limited to 'board/kontron/sl-mx6ul')
-rw-r--r-- | board/kontron/sl-mx6ul/Makefile | 2 | ||||
-rw-r--r-- | board/kontron/sl-mx6ul/sl-mx6ul-common.c | 24 | ||||
-rw-r--r-- | board/kontron/sl-mx6ul/sl-mx6ul-common.h | 11 | ||||
-rw-r--r-- | board/kontron/sl-mx6ul/sl-mx6ul.c | 15 | ||||
-rw-r--r-- | board/kontron/sl-mx6ul/spl.c | 23 |
5 files changed, 66 insertions, 9 deletions
diff --git a/board/kontron/sl-mx6ul/Makefile b/board/kontron/sl-mx6ul/Makefile index cae273c930..6af5f65450 100644 --- a/board/kontron/sl-mx6ul/Makefile +++ b/board/kontron/sl-mx6ul/Makefile @@ -6,3 +6,5 @@ obj-y := spl.o else obj-y := sl-mx6ul.o endif + +obj-y += sl-mx6ul-common.o diff --git a/board/kontron/sl-mx6ul/sl-mx6ul-common.c b/board/kontron/sl-mx6ul/sl-mx6ul-common.c new file mode 100644 index 0000000000..1f24acdfa3 --- /dev/null +++ b/board/kontron/sl-mx6ul/sl-mx6ul-common.c @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2022 Kontron Electronics GmbH + */ + +#include <asm/types.h> +#include <asm/arch/sys_proto.h> + +#include <sl-mx6ul-common.h> + +bool sl_mx6ul_is_spi_nor_boot(void) +{ + u32 bmode = imx6_src_get_boot_mode(); + + /* + * Check if "EEPROM Recovery" enabled and ECSPI2_CONREG not 0x0. + * If this is the case and U-Boot didn't initialize the SPI bus + * yet, we can safely assume that we are booting from SPI NOR. + */ + if ((bmode & 0x40000000) && readl(0x0200c008)) + return true; + + return false; +} diff --git a/board/kontron/sl-mx6ul/sl-mx6ul-common.h b/board/kontron/sl-mx6ul/sl-mx6ul-common.h new file mode 100644 index 0000000000..58a0e77a8b --- /dev/null +++ b/board/kontron/sl-mx6ul/sl-mx6ul-common.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2022 Kontron Electronics GmbH + */ + +#ifndef __SL_MX6UL_COMMON_H +#define __SL_MX6UL_COMMON_H + +bool sl_mx6ul_is_spi_nor_boot(void); + +#endif // __SL_MX6UL_COMMON_H diff --git a/board/kontron/sl-mx6ul/sl-mx6ul.c b/board/kontron/sl-mx6ul/sl-mx6ul.c index 79d4d8753b..0f45ea84fc 100644 --- a/board/kontron/sl-mx6ul/sl-mx6ul.c +++ b/board/kontron/sl-mx6ul/sl-mx6ul.c @@ -6,8 +6,10 @@ #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/global_data.h> +#include <env_internal.h> #include <fdt_support.h> #include <phy.h> +#include <sl-mx6ul-common.h> DECLARE_GLOBAL_DATA_PTR; @@ -83,3 +85,16 @@ int board_init(void) return 0; } + +enum env_location env_get_location(enum env_operation op, int prio) +{ + if (prio) + return ENVL_UNKNOWN; + + if (sl_mx6ul_is_spi_nor_boot() && CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH)) + return ENVL_SPI_FLASH; + else if (CONFIG_IS_ENABLED(ENV_IS_IN_MMC)) + return ENVL_MMC; + + return ENVL_NOWHERE; +} diff --git a/board/kontron/sl-mx6ul/spl.c b/board/kontron/sl-mx6ul/spl.c index 12b0352146..ba6915c898 100644 --- a/board/kontron/sl-mx6ul/spl.c +++ b/board/kontron/sl-mx6ul/spl.c @@ -17,6 +17,7 @@ #include <linux/sizes.h> #include <linux/errno.h> #include <mmc.h> +#include <sl-mx6ul-common.h> DECLARE_GLOBAL_DATA_PTR; @@ -339,26 +340,30 @@ void board_boot_order(u32 *spl_boot_list) /* * The default boot fuse settings use the SD card (MMC1) as primary - * boot device, but allow SPI NOR as a fallback boot device. - * We can't detect the fallback case and spl_boot_device() will return - * BOOT_DEVICE_MMC1 despite the actual boot device being SPI NOR. - * Therefore we try to load U-Boot proper vom SPI NOR after loading - * from MMC has failed. + * boot device, but allow SPI NOR as a fallback boot device. There + * is no proper way to detect if the fallback was used. Therefore + * we read the ECSPI2_CONREG register and see if it differs from the + * reset value 0x0. If that's the case we can assume that the BootROM + * has successfully probed the SPI NOR. */ - spl_boot_list[0] = bootdev; - switch (bootdev) { case BOOT_DEVICE_MMC1: case BOOT_DEVICE_MMC2: - spl_boot_list[1] = BOOT_DEVICE_SPI; + if (sl_mx6ul_is_spi_nor_boot()) { + spl_boot_list[0] = BOOT_DEVICE_SPI; + return; + } break; } + + spl_boot_list[0] = bootdev; } int board_early_init_f(void) { setup_iomux_uart(); - setup_spi(); + if (sl_mx6ul_is_spi_nor_boot()) + setup_spi(); return 0; } |