diff options
Diffstat (limited to 'board/kontron/sl-mx8mm/spl.c')
| -rw-r--r-- | board/kontron/sl-mx8mm/spl.c | 46 |
1 files changed, 2 insertions, 44 deletions
diff --git a/board/kontron/sl-mx8mm/spl.c b/board/kontron/sl-mx8mm/spl.c index 09f81351dd..c379d37f1e 100644 --- a/board/kontron/sl-mx8mm/spl.c +++ b/board/kontron/sl-mx8mm/spl.c @@ -29,15 +29,11 @@ DECLARE_GLOBAL_DATA_PTR; enum { BOARD_TYPE_KTN_N801X, - BOARD_TYPE_KTN_N801X_LVDS, BOARD_TYPE_MAX }; -#define GPIO_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) #define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE) -#define TOUCH_RESET_GPIO IMX_GPIO_NR(3, 23) - static iomux_v3_cfg_t const i2c1_pads[] = { IMX8MM_PAD_I2C1_SCL_I2C1_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL) | MUX_MODE_SION, IMX8MM_PAD_I2C1_SDA_I2C1_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL) | MUX_MODE_SION @@ -48,10 +44,6 @@ static iomux_v3_cfg_t const i2c2_pads[] = { IMX8MM_PAD_I2C2_SDA_I2C2_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL) | MUX_MODE_SION }; -static iomux_v3_cfg_t const touch_gpio[] = { - IMX8MM_PAD_SAI5_RXD2_GPIO3_IO23 | MUX_PAD_CTRL(GPIO_PAD_CTRL) -}; - int spl_board_boot_device(enum boot_device boot_dev_spl) { switch (boot_dev_spl) { @@ -123,20 +115,6 @@ static void spl_dram_init(void) writel(size, M4_BOOTROM_BASE_ADDR); } -static void touch_reset(void) -{ - /* - * Toggle the reset of the touch panel. - */ - imx_iomux_v3_setup_multiple_pads(touch_gpio, ARRAY_SIZE(touch_gpio)); - - gpio_request(TOUCH_RESET_GPIO, "touch_reset"); - gpio_direction_output(TOUCH_RESET_GPIO, 0); - mdelay(20); - gpio_direction_output(TOUCH_RESET_GPIO, 1); - mdelay(20); -} - static int i2c_detect(u8 bus, u16 addr) { struct udevice *udev; @@ -155,19 +133,6 @@ static int i2c_detect(u8 bus, u16 addr) int do_board_detect(void) { - bool lvds = false; - - /* - * Check the I2C touch controller to detect a LVDS panel. - */ - imx_iomux_v3_setup_multiple_pads(i2c2_pads, ARRAY_SIZE(i2c2_pads)); - touch_reset(); - - if (i2c_detect(1, 0x5d) == 0) { - printf("Touch controller detected, assuming LVDS panel...\n"); - lvds = true; - } - /* * Check the I2C PMIC to detect the deprecated SoM with DA9063. */ @@ -175,24 +140,17 @@ int do_board_detect(void) if (i2c_detect(0, 0x58) == 0) { printf("### ATTENTION: DEPRECATED SOM REVISION (N8010 Rev0) DETECTED! ###\n"); - printf("### THIS HW IS NOT SUPPRTED AND BOOTING WILL PROBABLY FAIL ###\n"); + printf("### THIS HW IS NOT SUPPORTED AND BOOTING WILL PROBABLY FAIL ###\n"); printf("### PLEASE UPGRADE TO LATEST MODULE ###\n"); } - if (lvds) - gd->board_type = BOARD_TYPE_KTN_N801X_LVDS; - else - gd->board_type = BOARD_TYPE_KTN_N801X; + gd->board_type = BOARD_TYPE_KTN_N801X; return 0; } int board_fit_config_name_match(const char *name) { - if (gd->board_type == BOARD_TYPE_KTN_N801X_LVDS && is_imx8mm() && - !strncmp(name, "imx8mm-kontron-n801x-s-lvds", 27)) - return 0; - if (gd->board_type == BOARD_TYPE_KTN_N801X && is_imx8mm() && !strncmp(name, "imx8mm-kontron-n801x-s", 22)) return 0; |