diff options
Diffstat (limited to 'board/liebherr/display5/display5.c')
-rw-r--r-- | board/liebherr/display5/display5.c | 302 |
1 files changed, 67 insertions, 235 deletions
diff --git a/board/liebherr/display5/display5.c b/board/liebherr/display5/display5.c index 037c4e69e5..85ca777c1d 100644 --- a/board/liebherr/display5/display5.c +++ b/board/liebherr/display5/display5.c @@ -18,11 +18,7 @@ #include <asm/gpio.h> #include <malloc.h> #include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/mxc_i2c.h> #include <asm/mach-imx/boot_mode.h> -#include <asm/mach-imx/spi.h> -#include <mmc.h> -#include <fsl_esdhc_imx.h> #include <miiphy.h> #include <netdev.h> #include <i2c.h> @@ -31,11 +27,6 @@ #include <dm/platform_data/serial_mxc.h> #include <dm/platdata.h> -#ifndef CONFIG_MXC_SPI -#error "CONFIG_SPI must be set for this board" -#error "Please check your config file" -#endif - #include "common.h" DECLARE_GLOBAL_DATA_PTR; @@ -45,61 +36,49 @@ static bool sw_ids_valid; static u32 cpu_id; static u32 unit_id; -#define EM_PAD IMX_GPIO_NR(3, 29) -#define SW0 IMX_GPIO_NR(2, 4) -#define SW1 IMX_GPIO_NR(2, 5) -#define SW2 IMX_GPIO_NR(2, 6) -#define SW3 IMX_GPIO_NR(2, 7) -#define HW0 IMX_GPIO_NR(6, 7) -#define HW1 IMX_GPIO_NR(6, 9) -#define HW2 IMX_GPIO_NR(6, 10) -#define HW3 IMX_GPIO_NR(6, 11) -#define HW4 IMX_GPIO_NR(4, 7) -#define HW5 IMX_GPIO_NR(4, 11) -#define HW6 IMX_GPIO_NR(4, 13) -#define HW7 IMX_GPIO_NR(4, 15) - -int gpio_table_sw_ids[] = { - SW0, SW1, SW2, SW3 +const char *gpio_table_sw_names[] = { + "GPIO2_4", "GPIO2_5", "GPIO2_6", "GPIO2_7" }; const char *gpio_table_sw_ids_names[] = { "sw0", "sw1", "sw2", "sw3" }; -int gpio_table_hw_ids[] = { - HW0, HW1, HW2, HW3, HW4, HW5, HW6, HW7 +const char *gpio_table_hw_names[] = { + "GPIO6_7", "GPIO6_9", "GPIO6_10", "GPIO6_11", + "GPIO4_7", "GPIO4_11", "GPIO4_13", "GPIO4_15" }; const char *gpio_table_hw_ids_names[] = { "hw0", "hw1", "hw2", "hw3", "hw4", "hw5", "hw6", "hw7" }; -static int get_board_id(int *ids, const char **c, int size, - bool *valid, u32 *id) +static int get_board_id(const char **pin_names, const char **ids_names, + int size, bool *valid, u32 *id) { + struct gpio_desc desc; int i, ret, val; *valid = false; for (i = 0; i < size; i++) { - ret = gpio_request(ids[i], c[i]); + memset(&desc, 0, sizeof(desc)); + + ret = dm_gpio_lookup_name(pin_names[i], &desc); if (ret) { - printf("Can't request SWx gpios\n"); + printf("Can't lookup request SWx gpios\n"); return ret; } - } - for (i = 0; i < size; i++) { - ret = gpio_direction_input(ids[i]); + ret = dm_gpio_request(&desc, ids_names[i]); if (ret) { - printf("Can't set SWx gpios direction\n"); + printf("Can't lookup request SWx gpios\n"); return ret; } - } - for (i = 0; i < size; i++) { - val = gpio_get_value(ids[i]); + dm_gpio_set_dir_flags(&desc, GPIOD_IS_IN); + + val = dm_gpio_get_value(&desc); if (val < 0) { printf("Can't get SW%d ID\n", i); *id = 0; @@ -119,49 +98,6 @@ int dram_init(void) return 0; } -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* I2C1: TFA9879 */ -struct i2c_pads_info i2c_pad_info0 = { - .scl = { - .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, - .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC, - .gp = IMX_GPIO_NR(3, 21) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC, - .gp = IMX_GPIO_NR(3, 28) - } -}; - -/* I2C2: TIVO TM4C123 */ -struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC, - .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, - .gp = IMX_GPIO_NR(2, 30) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC, - .gp = IMX_GPIO_NR(3, 16) - } -}; - -/* I2C3: PMIC PF0100, EEPROM AT24C256C */ -struct i2c_pads_info i2c_pad_info2 = { - .scl = { - .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, - .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, - .gp = IMX_GPIO_NR(3, 17) - }, - .sda = { - .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, - .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, - .gp = IMX_GPIO_NR(3, 18) - } -}; - iomux_v3_cfg_t const misc_pads[] = { /* Prod ID GPIO pins */ MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), @@ -186,182 +122,55 @@ iomux_v3_cfg_t const misc_pads[] = { MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -#ifdef CONFIG_FSL_ESDHC_IMX -struct fsl_esdhc_cfg usdhc_cfg[1] = { - { USDHC4_BASE_ADDR, 0, 8, }, -}; - -int board_mmc_getcd(struct mmc *mmc) +/* + * Do not overwrite the console + * Always use serial for U-Boot console + */ +int overwrite_console(void) { return 1; } -int board_mmc_init(bd_t *bis) -{ - displ5_set_iomux_usdhc(); - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -} -#endif /* CONFIG_FSL_ESDHC_IMX */ - -static void displ5_setup_ecspi(void) -{ - int ret; - - displ5_set_iomux_ecspi(); - - ret = gpio_request(IMX_GPIO_NR(5, 29), "spi2_cs0"); - if (!ret) - gpio_direction_output(IMX_GPIO_NR(5, 29), 1); - - ret = gpio_request(IMX_GPIO_NR(7, 0), "spi2_#wp"); - if (!ret) - gpio_direction_output(IMX_GPIO_NR(7, 0), 1); -} - -#ifdef CONFIG_FEC_MXC -iomux_v3_cfg_t const enet_pads[] = { - MX6_PAD_ENET_TXD1__ENET_1588_EVENT0_IN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - - /* for old evalboard with R159 present and R160 not populated */ - MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL), - - MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - - MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - /*INT#_GBE*/ - MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static void setup_iomux_enet(void) -{ - SETUP_IOMUX_PADS(enet_pads); - gpio_direction_input(IMX_GPIO_NR(1, 28)); /*INT#_GBE*/ -} - -static int setup_mac_from_fuse(void) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, bd_t *bd) { - unsigned char enetaddr[6]; - int ret; - - ret = eth_env_get_enetaddr("ethaddr", enetaddr); - if (ret) /* ethaddr is already set */ - return 0; - - imx_get_mac_from_fuse(0, enetaddr); - - if (is_valid_ethaddr(enetaddr)) { - eth_env_set_enetaddr("ethaddr", enetaddr); - return 0; - } - + fdt_fixup_ethernet(blob); return 0; } +#endif -int board_eth_init(bd_t *bd) +int board_phy_config(struct phy_device *phydev) { - struct phy_device *phydev; - struct mii_dev *bus; - int ret; - - setup_iomux_enet(); - - iomuxc_set_rgmii_io_voltage(DDR_SEL_1P5V_IO); - - ret = enable_fec_anatop_clock(0, ENET_125MHZ); - if (ret) - return ret; - - setup_mac_from_fuse(); - - bus = fec_get_miibus(IMX_FEC_BASE, -1); - if (!bus) - return -ENODEV; - - /* - * We use here the "rgmii-id" mode of operation and allow M88E1512 - * PHY to use its internally callibrated RX/TX delays - */ - phydev = phy_find_by_mask(bus, 0xffffffff /* (0xf << 4) */, - PHY_INTERFACE_MODE_RGMII_ID); - if (!phydev) { - ret = -ENODEV; - goto err_phy; - } - /* display5 due to PCB routing can only work with 100 Mbps */ phydev->advertising &= ~(ADVERTISED_1000baseX_Half | ADVERTISED_1000baseX_Full | SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full); - ret = fec_probe(bd, -1, IMX_FEC_BASE, bus, phydev); - if (ret) - goto err_sw; - - return 0; - -err_sw: - free(phydev); -err_phy: - mdio_unregister(bus); - free(bus); - return ret; -} -#endif /* CONFIG_FEC_MXC */ - -/* - * Do not overwrite the console - * Always use serial for U-Boot console - */ -int overwrite_console(void) -{ - return 1; -} + if (phydev->drv->config) + return phydev->drv->config(phydev); -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - fdt_fixup_ethernet(blob); return 0; } -#endif int board_init(void) { + struct gpio_desc phy_int_gbe, spi2_wp; + int ret; + debug("board init\n"); /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - /* Setup iomux for non console UARTS */ - displ5_set_iomux_uart(); - - displ5_setup_ecspi(); - + /* Setup misc (application specific) stuff */ SETUP_IOMUX_PADS(misc_pads); - get_board_id(gpio_table_sw_ids, &gpio_table_sw_ids_names[0], - ARRAY_SIZE(gpio_table_sw_ids), &sw_ids_valid, &unit_id); + get_board_id(gpio_table_sw_names, &gpio_table_sw_ids_names[0], + ARRAY_SIZE(gpio_table_sw_names), &sw_ids_valid, &unit_id); debug("SWx unit_id 0x%x\n", unit_id); - get_board_id(gpio_table_hw_ids, &gpio_table_hw_ids_names[0], - ARRAY_SIZE(gpio_table_hw_ids), &hw_ids_valid, &cpu_id); + get_board_id(gpio_table_hw_names, &gpio_table_hw_ids_names[0], + ARRAY_SIZE(gpio_table_hw_names), &hw_ids_valid, &cpu_id); debug("HWx cpu_id 0x%x\n", cpu_id); if (hw_ids_valid && sw_ids_valid) @@ -369,9 +178,29 @@ int board_init(void) udelay(25); - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + /* Setup low level FEC (ETH) */ + ret = dm_gpio_lookup_name("GPIO1_28", &phy_int_gbe); + if (ret) { + printf("Cannot get GPIO1_28\n"); + } else { + ret = dm_gpio_request(&phy_int_gbe, "INT_GBE"); + if (!ret) + dm_gpio_set_dir_flags(&phy_int_gbe, GPIOD_IS_IN); + } + + iomuxc_set_rgmii_io_voltage(DDR_SEL_1P5V_IO); + enable_fec_anatop_clock(0, ENET_125MHZ); + + /* Setup #WP for SPI-NOR memory */ + ret = dm_gpio_lookup_name("GPIO7_0", &spi2_wp); + if (ret) { + printf("Cannot get GPIO7_0\n"); + } else { + ret = dm_gpio_request(&spi2_wp, "spi2_#wp"); + if (!ret) + dm_gpio_set_dir_flags(&spi2_wp, GPIOD_IS_OUT | + GPIOD_IS_OUT_ACTIVE); + } return 0; } @@ -395,21 +224,24 @@ static inline void setup_boot_modes(void) {} int misc_init_r(void) { + struct gpio_desc em_pad; int ret; setup_boot_modes(); - ret = gpio_request(EM_PAD, "Emergency_PAD"); + ret = dm_gpio_lookup_name("GPIO3_29", &em_pad); if (ret) { - printf("Can't request emergency PAD gpio\n"); + printf("Can't find emergency PAD gpio\n"); return ret; } - ret = gpio_direction_input(EM_PAD); + ret = dm_gpio_request(&em_pad, "Emergency_PAD"); if (ret) { - printf("Can't set emergency PAD direction\n"); + printf("Can't request emergency PAD gpio\n"); return ret; } + dm_gpio_set_dir_flags(&em_pad, GPIOD_IS_IN); + return 0; } |