diff options
Diffstat (limited to 'board/ronetix/pm9263/pm9263.c')
-rw-r--r-- | board/ronetix/pm9263/pm9263.c | 67 |
1 files changed, 5 insertions, 62 deletions
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index 95c0dec4db..6dc080ac2c 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -19,17 +19,13 @@ #include <asm/arch/at91_matrix.h> #include <asm/arch/clk.h> #include <asm/arch/gpio.h> -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include <net.h> -#endif -#include <netdev.h> #include <asm/mach-types.h> DECLARE_GLOBAL_DATA_PTR; /* ------------------------------------------------------------------------- */ /* - * Miscelaneous platform dependent initialisations + * Miscellaneous platform dependent initializations */ #ifdef CONFIG_CMD_NAND @@ -73,41 +69,6 @@ static void pm9263_nand_hw_init(void) } #endif -#ifdef CONFIG_MACB -static void pm9263_macb_hw_init(void) -{ - /* - * PB27 enables the 50MHz oscillator for Ethernet PHY - * 1 - enable - * 0 - disable - */ - at91_set_pio_output(AT91_PIO_PORTB, 27, 1); - at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */ - - at91_periph_clk_enable(ATMEL_ID_EMAC); - - /* - * Disable pull-up on: - * RXDV (PC25) => PHY normal mode (not Test mode) - * ERX0 (PE25) => PHY ADDR0 - * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0 - * - * PHY has internal pull-down - */ - - at91_set_pio_pullup(AT91_PIO_PORTC, 25, 0); - at91_set_pio_pullup(AT91_PIO_PORTE, 25, 0); - at91_set_pio_pullup(AT91_PIO_PORTE, 26, 0); - - /* Re-enable pull-up */ - at91_set_pio_pullup(AT91_PIO_PORTC, 25, 1); - at91_set_pio_pullup(AT91_PIO_PORTE, 25, 1); - at91_set_pio_pullup(AT91_PIO_PORTE, 26, 1); - - at91_macb_hw_init(); -} -#endif - #ifdef CONFIG_LCD #ifdef CONFIG_LCD_IN_PSRAM @@ -205,7 +166,7 @@ static void pm9263_lcd_hw_init(void) at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */ #ifdef CONFIG_LCD_IN_PSRAM - /* initialize te PSRAM */ + /* initialize the PSRAM */ int stat = pm9263_lcd_hw_psram_init(); gd->fb_base = (stat == 0) ? PHYS_PSRAM : ATMEL_BASE_SRAM0; @@ -224,18 +185,15 @@ int board_early_init_f(void) int board_init(void) { - /* arch number of AT91SAM9263EK-Board */ + /* arch number of PM9263 Board */ gd->bd->bi_arch_number = MACH_TYPE_PM9263; - /* adress of boot parameters */ + /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; #ifdef CONFIG_CMD_NAND pm9263_nand_hw_init(); #endif -#ifdef CONFIG_MACB - pm9263_macb_hw_init(); -#endif #ifdef CONFIG_USB_OHCI_NEW at91_uhp_hw_init(); #endif @@ -247,7 +205,7 @@ int board_init(void) int dram_init(void) { - /* dram_init must store complete ramsize in gd->ram_size */ + /* dram_init must store complete RAM size in gd->ram_size */ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; @@ -261,21 +219,6 @@ int dram_init_banksize(void) return 0; } -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -} -#endif - -int board_eth_init(struct bd_info *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x01); -#endif - return rc; -} - #ifdef CONFIG_DISPLAY_BOARDINFO int checkboard (void) { |