diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/gateworks/gw_ventana/common.c | 131 | ||||
-rw-r--r-- | board/gateworks/gw_ventana/common.h | 2 | ||||
-rw-r--r-- | board/gateworks/gw_ventana/gw_ventana.c | 158 | ||||
-rw-r--r-- | board/gateworks/gw_ventana/gw_ventana_spl.c | 7 |
4 files changed, 141 insertions, 157 deletions
diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 4a15837473..e9b7357265 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -1697,6 +1697,137 @@ void setup_pmic(void) } } +#include <fdt_support.h> +#define WDOG1_ADDR 0x20bc000 +#define WDOG2_ADDR 0x20c0000 +#define GPIO3_ADDR 0x20a4000 +#define USDHC3_ADDR 0x2198000 + +static void ft_board_wdog_fixup(void *blob, phys_addr_t addr) +{ + int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr); + + if (off) { + fdt_delprop(blob, off, "ext-reset-output"); + fdt_delprop(blob, off, "fsl,ext-reset-output"); + } +} + +void ft_early_fixup(void *blob, int board_type) +{ + struct ventana_board_info *info = &ventana_info; + char rev = 0; + int i; + + /* determine board revision */ + for (i = sizeof(ventana_info.model) - 1; i > 0; i--) { + if (ventana_info.model[i] >= 'A') { + rev = ventana_info.model[i]; + break; + } + } + + /* + * Board model specific fixups + */ + switch (board_type) { + case GW51xx: + /* + * disable wdog node for GW51xx-A/B to work around + * errata causing wdog timer to be unreliable. + */ + if (rev >= 'A' && rev < 'C') { + i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", + WDOG1_ADDR); + if (i) + fdt_status_disabled(blob, i); + } + + /* GW51xx-E adds WDOG1_B external reset */ + if (rev < 'E') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + break; + + case GW52xx: + /* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */ + if (info->model[4] == '2') { + u32 handle = 0; + u32 *range = NULL; + + i = fdt_node_offset_by_compatible(blob, -1, + "fsl,imx6q-pcie"); + if (i) + range = (u32 *)fdt_getprop(blob, i, + "reset-gpio", NULL); + + if (range) { + i = fdt_node_offset_by_compat_reg(blob, + "fsl,imx6q-gpio", GPIO3_ADDR); + if (i) + handle = fdt_get_phandle(blob, i); + if (handle) { + range[0] = cpu_to_fdt32(handle); + range[1] = cpu_to_fdt32(23); + } + } + + /* these have broken usd_vsel */ + if (strstr((const char *)info->model, "SP318-B") || + strstr((const char *)info->model, "SP331-B")) + gpio_cfg[board_type].usd_vsel = 0; + + /* GW522x-B adds WDOG1_B external reset */ + if (rev < 'B') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + } + + /* GW520x-E adds WDOG1_B external reset */ + else if (info->model[4] == '0' && rev < 'E') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + break; + + case GW53xx: + /* GW53xx-E adds WDOG1_B external reset */ + if (rev < 'E') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + break; + + case GW54xx: + /* + * disable serial2 node for GW54xx for compatibility with older + * 3.10.x kernel that improperly had this node enabled in the DT + */ + fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED, + 0); + + /* GW54xx-E adds WDOG2_B external reset */ + if (rev < 'E') + ft_board_wdog_fixup(blob, WDOG2_ADDR); + break; + + case GW551x: + /* GW551x-C adds WDOG1_B external reset */ + if (rev < 'C') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + break; + case GW5901: + case GW5902: + /* GW5901/GW5901 revB adds WDOG1_B as an external reset */ + if (rev < 'B') + ft_board_wdog_fixup(blob, WDOG1_ADDR); + break; + } + + /* remove no-1-8-v if UHS-I support is present */ + if (gpio_cfg[board_type].usd_vsel) { + debug("Enabling UHS-I support\n"); + i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc", + USDHC3_ADDR); + if (i) + fdt_delprop(blob, i, "no-1-8-v"); + } +} + #ifdef CONFIG_FSL_ESDHC_IMX static struct fsl_esdhc_cfg usdhc_cfg[2]; diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h index 813f7d9f56..8f226d109b 100644 --- a/board/gateworks/gw_ventana/common.h +++ b/board/gateworks/gw_ventana/common.h @@ -93,5 +93,7 @@ void setup_pmic(void); void setup_iomux_gpio(int board, struct ventana_board_info *); /* late setup of GPIO (configuration per baseboard and env) */ void setup_board_gpio(int board, struct ventana_board_info *); +/* early model/revision ft fixups */ +void ft_early_fixup(void *fdt, int board_type); #endif /* #ifndef _GWVENTANA_COMMON_H_ */ diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index e2dd6dcb83..7e0122c66c 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -967,16 +967,6 @@ void ft_board_pci_fixup(void *blob, struct bd_info *bd) } #endif /* if defined(CONFIG_CMD_PCI) */ -void ft_board_wdog_fixup(void *blob, phys_addr_t addr) -{ - int off = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", addr); - - if (off) { - fdt_delprop(blob, off, "ext-reset-output"); - fdt_delprop(blob, off, "fsl,ext-reset-output"); - } -} - /* * called prior to booting kernel or by 'fdt boardsetup' command * @@ -986,10 +976,6 @@ void ft_board_wdog_fixup(void *blob, phys_addr_t addr) * - board (full model from EEPROM) * - peripherals removed from DTB if not loaded on board (per EEPROM config) */ -#define WDOG1_ADDR 0x20bc000 -#define WDOG2_ADDR 0x20c0000 -#define GPIO3_ADDR 0x20a4000 -#define USDHC3_ADDR 0x2198000 #define PWM0_ADDR 0x2080000 int ft_board_setup(void *blob, struct bd_info *bd) { @@ -1043,139 +1029,8 @@ int ft_board_setup(void *blob, struct bd_info *bd) /* set desired digital video capture format */ ft_sethdmiinfmt(blob, env_get("hdmiinfmt")); - /* - * Board model specific fixups - */ - switch (board_type) { - case GW51xx: - /* - * disable wdog node for GW51xx-A/B to work around - * errata causing wdog timer to be unreliable. - */ - if (rev >= 'A' && rev < 'C') { - i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-wdt", - WDOG1_ADDR); - if (i) - fdt_status_disabled(blob, i); - } - - /* GW51xx-E adds WDOG1_B external reset */ - if (rev < 'E') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - break; - - case GW52xx: - /* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */ - if (info->model[4] == '2') { - u32 handle = 0; - u32 *range = NULL; - - i = fdt_node_offset_by_compatible(blob, -1, - "fsl,imx6q-pcie"); - if (i) - range = (u32 *)fdt_getprop(blob, i, - "reset-gpio", NULL); - - if (range) { - i = fdt_node_offset_by_compat_reg(blob, - "fsl,imx6q-gpio", GPIO3_ADDR); - if (i) - handle = fdt_get_phandle(blob, i); - if (handle) { - range[0] = cpu_to_fdt32(handle); - range[1] = cpu_to_fdt32(23); - } - } - - /* these have broken usd_vsel */ - if (strstr((const char *)info->model, "SP318-B") || - strstr((const char *)info->model, "SP331-B")) - gpio_cfg[board_type].usd_vsel = 0; - - /* GW522x-B adds WDOG1_B external reset */ - if (rev < 'B') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - } - - /* GW520x-E adds WDOG1_B external reset */ - else if (info->model[4] == '0' && rev < 'E') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - break; - - case GW53xx: - /* GW53xx-E adds WDOG1_B external reset */ - if (rev < 'E') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - break; - - case GW54xx: - /* - * disable serial2 node for GW54xx for compatibility with older - * 3.10.x kernel that improperly had this node enabled in the DT - */ - fdt_set_status_by_alias(blob, "serial2", FDT_STATUS_DISABLED, - 0); - - /* GW54xx-E adds WDOG2_B external reset */ - if (rev < 'E') - ft_board_wdog_fixup(blob, WDOG2_ADDR); - break; - - case GW551x: - /* - * isolate CSI0_DATA_EN for GW551x-A to work around errata - * causing non functional digital video in (it is not hooked up) - */ - if (rev == 'A') { - u32 *range = NULL; - int len; - const u32 *handle = NULL; - - i = fdt_node_offset_by_compatible(blob, -1, - "fsl,imx-tda1997x-video"); - if (i) - handle = fdt_getprop(blob, i, "pinctrl-0", - NULL); - if (handle) - i = fdt_node_offset_by_phandle(blob, - fdt32_to_cpu(*handle)); - if (i) - range = (u32 *)fdt_getprop(blob, i, "fsl,pins", - &len); - if (range) { - len /= sizeof(u32); - for (i = 0; i < len; i += 6) { - u32 mux_reg = fdt32_to_cpu(range[i+0]); - u32 conf_reg = fdt32_to_cpu(range[i+1]); - /* mux PAD_CSI0_DATA_EN to GPIO */ - if (is_cpu_type(MXC_CPU_MX6Q) && - mux_reg == 0x260 && - conf_reg == 0x630) - range[i+3] = cpu_to_fdt32(0x5); - else if (!is_cpu_type(MXC_CPU_MX6Q) && - mux_reg == 0x08c && - conf_reg == 0x3a0) - range[i+3] = cpu_to_fdt32(0x5); - } - fdt_setprop_inplace(blob, i, "fsl,pins", range, - len); - } - - /* set BT656 video format */ - ft_sethdmiinfmt(blob, "yuv422bt656"); - } - - /* GW551x-C adds WDOG1_B external reset */ - if (rev < 'C') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - break; - case GW5901: - case GW5902: - /* GW5901/GW5901 revB adds WDOG1_B as an external reset */ - if (rev < 'B') - ft_board_wdog_fixup(blob, WDOG1_ADDR); - break; - } + /* early board/revision ft fixups */ + ft_early_fixup(blob, board_type); /* Configure DIO */ for (i = 0; i < gpio_cfg[board_type].dio_num; i++) { @@ -1201,15 +1056,6 @@ int ft_board_setup(void *blob, struct bd_info *bd) } } - /* remove no-1-8-v if UHS-I support is present */ - if (gpio_cfg[board_type].usd_vsel) { - debug("Enabling UHS-I support\n"); - i = fdt_node_offset_by_compat_reg(blob, "fsl,imx6q-usdhc", - USDHC3_ADDR); - if (i) - fdt_delprop(blob, i, "no-1-8-v"); - } - #if defined(CONFIG_CMD_PCI) if (!env_get("nopcifixup")) ft_board_pci_fixup(blob, bd); diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index a4f64395a1..5a69aff671 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -729,10 +729,10 @@ void board_boot_order(u32 *spl_boot_list) /* called from board_init_r after gd setup if CONFIG_SPL_BOARD_INIT defined */ /* its our chance to print info about boot device */ +static int board_type; void spl_board_init(void) { u32 boot_device; - int board_type; /* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 */ boot_device = spl_boot_device(); @@ -785,3 +785,8 @@ int spl_start_uboot(void) return ret; } #endif + +void spl_perform_fixups(struct spl_image_info *spl_image) +{ + ft_early_fixup(spl_image->fdt_addr, board_type); +} |