diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/keymile/Kconfig | 101 | ||||
| -rw-r--r-- | board/keymile/km_arm/Kconfig | 29 |
2 files changed, 130 insertions, 0 deletions
diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index e30d64818c..acaa9289f7 100644 --- a/board/keymile/Kconfig +++ b/board/keymile/Kconfig @@ -9,8 +9,109 @@ config VENDOR_KM if VENDOR_KM +menu "KM Board Setup" + +config KM_PNVRAM + hex "Pseudo RAM" + default 0x80000 + help + Start address of the pseudo non-volatile RAM for application. + +config KM_PHRAM + hex "Physical RAM" + default 0x17F000 if ARM + default 0x100000 if PPC + help + Start address of the physical RAM, which is the mounted /var folder. + +config KM_RESERVED_PRAM + hex "Reserved RAM" + default 0x801000 if KIRKWOOD + default 0x0 if MPC83xx + default 0x1000 if MPC85xx + help + Reserved physical RAM area at the end of memory for special purposes. + +config KM_CRAMFS_ADDR + hex "CRAMFS Address" + default 0x2400000 if KIRKWOOD + default 0xC00000 if MPC83xx + default 0x2000000 if MPC85xx + help + Start address of the CRAMFS containing the Linux kernel. + +config KM_KERNEL_ADDR + hex "Kernel Load Address" + default 0x2000000 if KIRKWOOD + default 0x400000 if MPC83xx + default 0x1000000 if MPC85xx + help + Address where to load Linux kernel in RAM. + +config KM_FDT_ADDR + hex "FDT Load Address" + default 0x23E0000 if KIRKWOOD + default 0xB80000 if MPC83xx + default 0x1F80000 if MPC85xx + help + Address where to load flattened device tree in RAM. + +config KM_CONSOLE_TTY + string "KM Console" + default "ttyS0" + help + TTY console to use on board. + +config KM_COMMON_ETH_INIT + bool "Common Ethernet Initialization" + default y if KIRKWOOD || MPC83xx + default n if MPC85xx + help + Use the Ethernet initialization implemented in common code, which + detects if a Piggy board is present. + +config PIGGY_MAC_ADRESS_OFFSET + int "Piggy Address Offset" + default 0 + help + MAC address offset for the Piggy board. + +config KM_MVEXTSW_ADDR + hex "Marvell Switch Address" + depends on MV88E6352_SWITCH + default 0x10 + help + Address of external Marvell switch. + +config KM_IVM_BUS + int "IVM I2C Bus" + default 1 if KIRKWOOD || MPC85xx + default 2 if MPC83xx + help + Identifier number of I2C bus, where the inventory EEPROM is connected to. + +config SYS_IVM_EEPROM_ADR + hex "IVM I2C Address" + default 0x50 + help + I2C address of the EEPROM containing the inventory. + +config SYS_IVM_EEPROM_MAX_LEN + hex "IVM Length" + default 0x400 + help + Maximum length of inventory in EEPROM. + +config SYS_IVM_EEPROM_PAGE_LEN + hex "IVM Page Size" + default 0x100 + help + Page size of inventory in EEPROM. + source "board/keymile/km83xx/Kconfig" source "board/keymile/kmp204x/Kconfig" source "board/keymile/km_arm/Kconfig" +endmenu + endif diff --git a/board/keymile/km_arm/Kconfig b/board/keymile/km_arm/Kconfig index 19c1db3bc2..7da052f4c4 100644 --- a/board/keymile/km_arm/Kconfig +++ b/board/keymile/km_arm/Kconfig @@ -1,3 +1,32 @@ +menu "KM ARM Options" + depends on ARM + +config KM_FPGA_CONFIG + bool "FPGA Configuration" + default n + help + Include capability to change FPGA configuration. + +config KM_ENV_IS_IN_SPI_NOR + bool "Environment in SPI NOR" + default n + help + Put the U-Boot environment in the SPI NOR flash. + +config KM_PIGGY4_88E6061 + bool "Piggy via Switch 88E6061" + default n + help + The Piggy4 board is connected via a Marvell 88E6061 switch. + +config KM_PIGGY4_88E6352 + bool "Piggy via Switch 88E6352" + default n + help + The Piggy4 board is connected via a Marvell 88E6352 switch. + +endmenu + if TARGET_KM_KIRKWOOD config SYS_BOARD |