summaryrefslogtreecommitdiff
path: root/cmd/otp.c
diff options
context:
space:
mode:
Diffstat (limited to 'cmd/otp.c')
-rw-r--r--cmd/otp.c228
1 files changed, 228 insertions, 0 deletions
diff --git a/cmd/otp.c b/cmd/otp.c
new file mode 100644
index 0000000000..10c1475c5a
--- /dev/null
+++ b/cmd/otp.c
@@ -0,0 +1,228 @@
+/*
+ * cmd_otp.c - interface to Blackfin on-chip One-Time-Programmable memory
+ *
+ * Copyright (c) 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* There are 512 128-bit "pages" (0x000 through 0x1FF).
+ * The pages are accessable as 64-bit "halfpages" (an upper and lower half).
+ * The pages are not part of the memory map. There is an OTP controller which
+ * handles scanning in/out of bits. While access is done through OTP MMRs,
+ * the bootrom provides C-callable helper functions to handle the interaction.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <console.h>
+
+#include <asm/blackfin.h>
+#include <asm/clock.h>
+#include <asm/mach-common/bits/otp.h>
+
+static const char *otp_strerror(uint32_t err)
+{
+ switch (err) {
+ case 0: return "no error";
+ case OTP_WRITE_ERROR: return "OTP fuse write error";
+ case OTP_READ_ERROR: return "OTP fuse read error";
+ case OTP_ACC_VIO_ERROR: return "invalid OTP address";
+ case OTP_DATA_MULT_ERROR: return "multiple bad bits detected";
+ case OTP_ECC_MULT_ERROR: return "error in ECC bits";
+ case OTP_PREV_WR_ERROR: return "space already written";
+ case OTP_DATA_SB_WARN: return "single bad bit in half page";
+ case OTP_ECC_SB_WARN: return "single bad bit in ECC";
+ default: return "unknown error";
+ }
+}
+
+#define lowup(x) ((x) % 2 ? "upper" : "lower")
+
+static int check_voltage(void)
+{
+ /* Make sure voltage limits are within datasheet spec */
+ uint16_t vr_ctl = bfin_read_VR_CTL();
+
+#ifdef __ADSPBF54x__
+ /* 0.9V <= VDDINT <= 1.1V */
+ if ((vr_ctl & 0xc) && (vr_ctl & 0xc0) == 0xc0)
+ return 1;
+#else
+ /* for the parts w/out qualification yet */
+ (void)vr_ctl;
+#endif
+
+ return 0;
+}
+
+static void set_otp_timing(bool write)
+{
+ static uint32_t timing;
+ if (!timing) {
+ uint32_t tp1, tp2, tp3;
+ /* OTP_TP1 = 1000 / sclk_period (in nanoseconds)
+ * OTP_TP1 = 1000 / (1 / get_sclk() * 10^9)
+ * OTP_TP1 = (1000 * get_sclk()) / 10^9
+ * OTP_TP1 = get_sclk() / 10^6
+ */
+ tp1 = get_sclk() / 1000000;
+ /* OTP_TP2 = 400 / (2 * sclk_period)
+ * OTP_TP2 = 400 / (2 * 1 / get_sclk() * 10^9)
+ * OTP_TP2 = (400 * get_sclk()) / (2 * 10^9)
+ * OTP_TP2 = (2 * get_sclk()) / 10^7
+ */
+ tp2 = (2 * get_sclk() / 10000000) << 8;
+ /* OTP_TP3 = magic constant */
+ tp3 = (0x1401) << 15;
+ timing = tp1 | tp2 | tp3;
+ }
+
+ bfrom_OtpCommand(OTP_INIT, write ? timing : timing & ~(-1 << 15));
+}
+
+int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ char *cmd;
+ uint32_t ret, base_flags;
+ bool prompt_user, force_read;
+ uint32_t (*otp_func)(uint32_t page, uint32_t flags, uint64_t *page_content);
+
+ if (argc < 4) {
+ usage:
+ return CMD_RET_USAGE;
+ }
+
+ prompt_user = false;
+ base_flags = 0;
+ cmd = argv[1];
+ if (!strcmp(cmd, "read"))
+ otp_func = bfrom_OtpRead;
+ else if (!strcmp(cmd, "dump")) {
+ otp_func = bfrom_OtpRead;
+ force_read = true;
+ } else if (!strcmp(cmd, "write")) {
+ otp_func = bfrom_OtpWrite;
+ base_flags = OTP_CHECK_FOR_PREV_WRITE;
+ if (!strcmp(argv[2], "--force")) {
+ argv++;
+ --argc;
+ } else
+ prompt_user = false;
+ } else if (!strcmp(cmd, "lock")) {
+ if (argc != 4)
+ goto usage;
+ otp_func = bfrom_OtpWrite;
+ base_flags = OTP_LOCK;
+ } else
+ goto usage;
+
+ uint64_t *addr = (uint64_t *)simple_strtoul(argv[2], NULL, 16);
+ uint32_t page = simple_strtoul(argv[3], NULL, 16);
+ uint32_t flags;
+ size_t i, count;
+ ulong half;
+
+ if (argc > 4)
+ count = simple_strtoul(argv[4], NULL, 16);
+ else
+ count = 2;
+
+ if (argc > 5) {
+ half = simple_strtoul(argv[5], NULL, 16);
+ if (half != 0 && half != 1) {
+ puts("Error: 'half' can only be '0' or '1'\n");
+ goto usage;
+ }
+ } else
+ half = 0;
+
+ /* "otp lock" has slightly different semantics */
+ if (base_flags & OTP_LOCK) {
+ count = page;
+ page = (uint32_t)addr;
+ addr = NULL;
+ }
+
+ /* do to the nature of OTP, make sure users are sure */
+ if (prompt_user) {
+ printf(
+ "Writing one time programmable memory\n"
+ "Make sure your operating voltages and temperature are within spec\n"
+ " source address: 0x%p\n"
+ " OTP destination: %s page 0x%03X - %s page 0x%03lX\n"
+ " number to write: %lu halfpages\n"
+ " type \"YES\" (no quotes) to confirm: ",
+ addr,
+ lowup(half), page,
+ lowup(half + count - 1), page + (half + count - 1) / 2,
+ half + count
+ );
+ if (!confirm_yesno()) {
+ printf(" Aborting\n");
+ return 1;
+ }
+ }
+
+ printf("OTP memory %s: addr 0x%p page 0x%03X count %zu ... ",
+ cmd, addr, page, count);
+
+ set_otp_timing(otp_func == bfrom_OtpWrite);
+ if (otp_func == bfrom_OtpWrite && check_voltage()) {
+ puts("ERROR: VDDINT voltage is out of spec for writing\n");
+ return -1;
+ }
+
+ /* Do the actual reading/writing stuff */
+ ret = 0;
+ for (i = half; i < count + half; ++i) {
+ flags = base_flags | (i % 2 ? OTP_UPPER_HALF : OTP_LOWER_HALF);
+ try_again:
+ ret = otp_func(page, flags, addr);
+ if (ret & OTP_MASTER_ERROR) {
+ if (force_read) {
+ if (flags & OTP_NO_ECC)
+ break;
+ else
+ flags |= OTP_NO_ECC;
+ puts("E");
+ goto try_again;
+ } else
+ break;
+ } else if (ret)
+ puts("W");
+ else
+ puts(".");
+ if (!(base_flags & OTP_LOCK)) {
+ ++addr;
+ if (i % 2)
+ ++page;
+ } else
+ ++page;
+ }
+ if (ret & 0x1)
+ printf("\nERROR at page 0x%03X (%s-halfpage): 0x%03X: %s\n",
+ page, lowup(i), ret, otp_strerror(ret));
+ else
+ puts(" done\n");
+
+ /* Make sure we disable writing */
+ set_otp_timing(false);
+ bfrom_OtpCommand(OTP_CLOSE, 0);
+
+ return ret;
+}
+
+U_BOOT_CMD(
+ otp, 7, 0, do_otp,
+ "One-Time-Programmable sub-system",
+ "read <addr> <page> [count] [half]\n"
+ " - read 'count' half-pages starting at 'page' (offset 'half') to 'addr'\n"
+ "otp dump <addr> <page> [count] [half]\n"
+ " - like 'otp read', but skip read errors\n"
+ "otp write [--force] <addr> <page> [count] [half]\n"
+ " - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n"
+ "otp lock <page> <count>\n"
+ " - lock 'count' pages starting at 'page'"
+);