diff options
Diffstat (limited to 'common')
-rw-r--r-- | common/cmd_mii.c | 29 | ||||
-rw-r--r-- | common/miiphyutil.c | 50 |
2 files changed, 39 insertions, 40 deletions
diff --git a/common/cmd_mii.c b/common/cmd_mii.c index 3fb0795c3f..23b723eb23 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -35,12 +35,12 @@ typedef struct _MII_reg_desc_t { } MII_reg_desc_t; static const MII_reg_desc_t reg_0_5_desc_tbl[] = { - { 0, "PHY control register" }, - { 1, "PHY status register" }, - { 2, "PHY ID 1 register" }, - { 3, "PHY ID 2 register" }, - { 4, "Autonegotiation advertisement register" }, - { 5, "Autonegotiation partner abilities register" }, + { MII_BMCR, "PHY control register" }, + { MII_BMSR, "PHY status register" }, + { MII_PHYSID1, "PHY ID 1 register" }, + { MII_PHYSID2, "PHY ID 2 register" }, + { MII_ADVERTISE, "Autonegotiation advertisement register" }, + { MII_LPA, "Autonegotiation partner abilities register" }, }; typedef struct _MII_field_desc_t { @@ -212,20 +212,19 @@ static int special_field( const MII_field_desc_t *pdesc, ushort regval) { - if ((regno == 0) && (pdesc->lo == 6)) { - ushort speed_bits = regval & PHY_BMCR_SPEED_MASK; + if ((regno == MII_BMCR) && (pdesc->lo == 6)) { + ushort speed_bits = regval & (BMCR_SPEED1000 | BMCR_SPEED100); printf("%2u,%2u = b%u%u speed selection = %s Mbps", 6, 13, (regval >> 6) & 1, (regval >> 13) & 1, - speed_bits == PHY_BMCR_1000_MBPS ? "1000" : - speed_bits == PHY_BMCR_100_MBPS ? "100" : - speed_bits == PHY_BMCR_10_MBPS ? "10" : - "???"); + speed_bits == BMCR_SPEED1000 ? "1000" : + speed_bits == BMCR_SPEED100 ? "100" : + "10"); return 1; } - else if ((regno == 0) && (pdesc->lo == 8)) { + else if ((regno == MII_BMCR) && (pdesc->lo == 8)) { printf("%2u = %5u duplex = %s", pdesc->lo, (regval >> pdesc->lo) & 1, @@ -233,7 +232,7 @@ static int special_field( return 1; } - else if ((regno == 4) && (pdesc->lo == 0)) { + else if ((regno == MII_ADVERTISE) && (pdesc->lo == 0)) { ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask; printf("%2u-%2u = %5u selector = %s", pdesc->hi, pdesc->lo, sel_bits, @@ -245,7 +244,7 @@ static int special_field( return 1; } - else if ((regno == 5) && (pdesc->lo == 0)) { + else if ((regno == MII_LPA) && (pdesc->lo == 0)) { ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask; printf("%2u-%2u = %u selector = %s", pdesc->hi, pdesc->lo, sel_bits, diff --git a/common/miiphyutil.c b/common/miiphyutil.c index 9cf845f605..e282096a13 100644 --- a/common/miiphyutil.c +++ b/common/miiphyutil.c @@ -253,20 +253,20 @@ int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui, unsigned int reg = 0; unsigned short tmp; - if (miiphy_read (devname, addr, PHY_PHYIDR2, &tmp) != 0) { + if (miiphy_read (devname, addr, MII_PHYSID2, &tmp) != 0) { debug ("PHY ID register 2 read failed\n"); return (-1); } reg = tmp; - debug ("PHY_PHYIDR2 @ 0x%x = 0x%04x\n", addr, reg); + debug ("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg); if (reg == 0xFFFF) { /* No physical device present at this address */ return (-1); } - if (miiphy_read (devname, addr, PHY_PHYIDR1, &tmp) != 0) { + if (miiphy_read (devname, addr, MII_PHYSID1, &tmp) != 0) { debug ("PHY ID register 1 read failed\n"); return (-1); } @@ -290,11 +290,11 @@ int miiphy_reset(const char *devname, unsigned char addr) unsigned short reg; int timeout = 500; - if (miiphy_read (devname, addr, PHY_BMCR, ®) != 0) { + if (miiphy_read (devname, addr, MII_BMCR, ®) != 0) { debug ("PHY status read failed\n"); return (-1); } - if (miiphy_write (devname, addr, PHY_BMCR, reg | PHY_BMCR_RESET) != 0) { + if (miiphy_write (devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) { debug ("PHY reset failed\n"); return (-1); } @@ -308,7 +308,7 @@ int miiphy_reset(const char *devname, unsigned char addr) */ reg = 0x8000; while (((reg & 0x8000) != 0) && timeout--) { - if (miiphy_read(devname, addr, PHY_BMCR, ®) != 0) { + if (miiphy_read(devname, addr, MII_BMCR, ®) != 0) { debug("PHY status read failed\n"); return -1; } @@ -345,7 +345,7 @@ int miiphy_speed(const char *devname, unsigned char addr) * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set. */ /* Check for 1000BASE-T. */ - if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) { + if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) { printf ("PHY 1000BT status"); goto miiphy_read_failed; } @@ -356,21 +356,21 @@ int miiphy_speed(const char *devname, unsigned char addr) #endif /* CONFIG_PHY_GIGE */ /* Check Basic Management Control Register first. */ - if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) { + if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) { printf ("PHY speed"); goto miiphy_read_failed; } /* Check if auto-negotiation is on. */ - if (bmcr & PHY_BMCR_AUTON) { + if (bmcr & BMCR_ANENABLE) { /* Get auto-negotiation results. */ - if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) { + if (miiphy_read (devname, addr, MII_LPA, &anlpar)) { printf ("PHY AN speed"); goto miiphy_read_failed; } - return (anlpar & PHY_ANLPAR_100) ? _100BASET : _10BASET; + return (anlpar & LPA_100) ? _100BASET : _10BASET; } /* Get speed from basic control settings. */ - return (bmcr & PHY_BMCR_100MB) ? _100BASET : _10BASET; + return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET; miiphy_read_failed: printf (" read failed, assuming 10BASE-T\n"); @@ -391,7 +391,7 @@ int miiphy_duplex(const char *devname, unsigned char addr) /* Check for 1000BASE-X. */ if (miiphy_is_1000base_x (devname, addr)) { /* 1000BASE-X */ - if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) { + if (miiphy_read (devname, addr, MII_LPA, &anlpar)) { printf ("1000BASE-X PHY AN duplex"); goto miiphy_read_failed; } @@ -400,7 +400,7 @@ int miiphy_duplex(const char *devname, unsigned char addr) * No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set. */ /* Check for 1000BASE-T. */ - if (miiphy_read (devname, addr, PHY_1000BTSR, &btsr)) { + if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) { printf ("PHY 1000BT status"); goto miiphy_read_failed; } @@ -414,22 +414,22 @@ int miiphy_duplex(const char *devname, unsigned char addr) #endif /* CONFIG_PHY_GIGE */ /* Check Basic Management Control Register first. */ - if (miiphy_read (devname, addr, PHY_BMCR, &bmcr)) { + if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) { puts ("PHY duplex"); goto miiphy_read_failed; } /* Check if auto-negotiation is on. */ - if (bmcr & PHY_BMCR_AUTON) { + if (bmcr & BMCR_ANENABLE) { /* Get auto-negotiation results. */ - if (miiphy_read (devname, addr, PHY_ANLPAR, &anlpar)) { + if (miiphy_read (devname, addr, MII_LPA, &anlpar)) { puts ("PHY AN duplex"); goto miiphy_read_failed; } - return (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) ? + return (anlpar & (LPA_10FULL | LPA_100FULL)) ? FULL : HALF; } /* Get speed from basic control settings. */ - return (bmcr & PHY_BMCR_DPLX) ? FULL : HALF; + return (bmcr & BMCR_FULLDPLX) ? FULL : HALF; miiphy_read_failed: printf (" read failed, assuming half duplex\n"); @@ -446,12 +446,12 @@ int miiphy_is_1000base_x(const char *devname, unsigned char addr) #if defined(CONFIG_PHY_GIGE) u16 exsr; - if (miiphy_read (devname, addr, PHY_EXSR, &exsr)) { + if (miiphy_read (devname, addr, MII_ESTATUS, &exsr)) { printf ("PHY extended status read failed, assuming no " "1000BASE-X\n"); return 0; } - return 0 != (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH)); + return 0 != (exsr & (ESTATUS_1000XF | ESTATUS_1000XH)); #else return 0; #endif @@ -467,14 +467,14 @@ int miiphy_link(const char *devname, unsigned char addr) unsigned short reg; /* dummy read; needed to latch some phys */ - (void)miiphy_read (devname, addr, PHY_BMSR, ®); - if (miiphy_read (devname, addr, PHY_BMSR, ®)) { - puts ("PHY_BMSR read failed, assuming no link\n"); + (void)miiphy_read (devname, addr, MII_BMSR, ®); + if (miiphy_read (devname, addr, MII_BMSR, ®)) { + puts ("MII_BMSR read failed, assuming no link\n"); return (0); } /* Determine if a link is active */ - if ((reg & PHY_BMSR_LS) != 0) { + if ((reg & BMSR_LSTATUS) != 0) { return (1); } else { return (0); |