diff options
Diffstat (limited to 'common')
| -rw-r--r-- | common/image.c | 1 | ||||
| -rw-r--r-- | common/spl/Kconfig | 17 | ||||
| -rw-r--r-- | common/spl/Makefile | 1 | ||||
| -rw-r--r-- | common/spl/spl.c | 6 | ||||
| -rw-r--r-- | common/spl/spl_opensbi.c | 85 |
5 files changed, 110 insertions, 0 deletions
diff --git a/common/image.c b/common/image.c index 84e859a30f..645584b5ba 100644 --- a/common/image.c +++ b/common/image.c @@ -132,6 +132,7 @@ static const table_entry_t uimage_os[] = { #if defined(CONFIG_BOOTM_OPENRTOS) || defined(USE_HOSTCC) { IH_OS_OPENRTOS, "openrtos", "OpenRTOS", }, #endif + { IH_OS_OPENSBI, "opensbi", "RISC-V OpenSBI", }, { -1, "", "", }, }; diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 660aa66d84..644a109942 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -1148,6 +1148,23 @@ config SPL_OPTEE OP-TEE is an open source Trusted OS which is loaded by SPL. More detail at: https://github.com/OP-TEE/optee_os +config SPL_OPENSBI + bool "Support RISC-V OpenSBI" + depends on RISCV && SPL_RISCV_MMODE && RISCV_SMODE + help + OpenSBI is an open-source implementation of the RISC-V Supervisor Binary + Interface (SBI) specification. U-Boot supports the OpenSBI FW_DYNAMIC + firmware. It is loaded and started by U-Boot SPL. + + More details are available at https://github.com/riscv/opensbi and + https://github.com/riscv/riscv-sbi-doc + +config SPL_OPENSBI_LOAD_ADDR + hex "OpenSBI load address" + depends on SPL_OPENSBI + help + Load address of the OpenSBI binary. + config TPL bool depends on SUPPORT_TPL diff --git a/common/spl/Makefile b/common/spl/Makefile index d28de692dd..5ce6f4ae48 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o +obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o diff --git a/common/spl/spl.c b/common/spl/spl.c index 2c696f2a79..8c9415bedf 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -659,6 +659,12 @@ void board_init_r(gd_t *dummy1, ulong dummy2) (void *)spl_image.entry_point); break; #endif +#if CONFIG_IS_ENABLED(OPENSBI) + case IH_OS_OPENSBI: + debug("Jumping to U-Boot via RISC-V OpenSBI\n"); + spl_invoke_opensbi(&spl_image); + break; +#endif #ifdef CONFIG_SPL_OS_BOOT case IH_OS_LINUX: debug("Jumping to Linux\n"); diff --git a/common/spl/spl_opensbi.c b/common/spl/spl_opensbi.c new file mode 100644 index 0000000000..a6b4480ed2 --- /dev/null +++ b/common/spl/spl_opensbi.c @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Fraunhofer AISEC, + * Lukas Auer <lukas.auer@aisec.fraunhofer.de> + * + * Based on common/spl/spl_atf.c + */ +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/smp.h> +#include <opensbi.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct fw_dynamic_info opensbi_info; + +static int spl_opensbi_find_uboot_node(void *blob, int *uboot_node) +{ + int fit_images_node, node; + const char *fit_os; + + fit_images_node = fdt_path_offset(blob, "/fit-images"); + if (fit_images_node < 0) + return -ENODEV; + + fdt_for_each_subnode(node, blob, fit_images_node) { + fit_os = fdt_getprop(blob, node, FIT_OS_PROP, NULL); + if (!fit_os) + continue; + + if (genimg_get_os_id(fit_os) == IH_OS_U_BOOT) { + *uboot_node = node; + return 0; + } + } + + return -ENODEV; +} + +void spl_invoke_opensbi(struct spl_image_info *spl_image) +{ + int ret, uboot_node; + ulong uboot_entry; + void (*opensbi_entry)(ulong hartid, ulong dtb, ulong info); + + if (!spl_image->fdt_addr) { + pr_err("No device tree specified in SPL image\n"); + hang(); + } + + /* Find U-Boot image in /fit-images */ + ret = spl_opensbi_find_uboot_node(spl_image->fdt_addr, &uboot_node); + if (ret) { + pr_err("Can't find U-Boot node, %d", ret); + hang(); + } + + /* Get U-Boot entry point */ + uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node, + "entry-point"); + if (uboot_entry == FDT_ERROR) + uboot_entry = fdt_getprop_u32(spl_image->fdt_addr, uboot_node, + "load-addr"); + + /* Prepare obensbi_info object */ + opensbi_info.magic = FW_DYNAMIC_INFO_MAGIC_VALUE; + opensbi_info.version = FW_DYNAMIC_INFO_VERSION; + opensbi_info.next_addr = uboot_entry; + opensbi_info.next_mode = FW_DYNAMIC_INFO_NEXT_MODE_S; + opensbi_info.options = SBI_SCRATCH_NO_BOOT_PRINTS; + + opensbi_entry = (void (*)(ulong, ulong, ulong))spl_image->entry_point; + invalidate_icache_all(); + +#ifdef CONFIG_SMP + ret = smp_call_function((ulong)spl_image->entry_point, + (ulong)spl_image->fdt_addr, + (ulong)&opensbi_info); + if (ret) + hang(); +#endif + opensbi_entry(gd->arch.boot_hart, (ulong)spl_image->fdt_addr, + (ulong)&opensbi_info); +} |