diff options
Diffstat (limited to 'doc/board/toradex/apalix-imx8x.rst')
-rw-r--r-- | doc/board/toradex/apalix-imx8x.rst | 33 |
1 files changed, 18 insertions, 15 deletions
diff --git a/doc/board/toradex/apalix-imx8x.rst b/doc/board/toradex/apalix-imx8x.rst index ce7dde8d00..efa7e0c72e 100644 --- a/doc/board/toradex/apalix-imx8x.rst +++ b/doc/board/toradex/apalix-imx8x.rst @@ -1,43 +1,46 @@ .. SPDX-License-Identifier: GPL-2.0+ -Apalis iMX8X V1.1A Module +Apalis iMX8X V1.1A Module (SoC NXP i.MX8QXP RevB) ========================== Quick Start ----------- -- Build the ARM trusted firmware binary -- Get scfw_tcm.bin and ahab-container.img +- Get and Build the ARM trusted firmware +- Get System Controller firmware +- Get SECO container - Build U-Boot - Load U-Boot binary using uuu - Flash U-Boot binary into the eMMC - Boot +Note: builddir is U-Boot build directory (source directory for in-tree builds) + Get and Build the ARM Trusted Firmware -------------------------------------- .. code-block:: bash - $ git clone -b toradex_imx_5.4.24_2.1.0 http://git.toradex.com/cgit/imx-atf.git - $ cd imx-atf/ - $ make PLAT=imx8qx bl31 + $ cd $(builddir) + $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git + $ make PLAT=imx8qx bl31 -C imx-atf + $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir) -Get scfw_tcm.bin and ahab-container.img +Get System Controller firmware --------------------------------------- .. code-block:: bash - $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/blob/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin - $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.6.3.bin - $ chmod +x imx-seco-3.6.3.bin - $ ./imx-seco-3.6.3.bin + $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin -Copy the following binaries to the U-Boot folder: +Get SECO container +--------------------------------------- .. code-block:: bash - $ cp imx-atf/build/imx8qx/release/bl31.bin . - $ cp imx-seco-3.6.3/firmware/seco/mx8qxb0-ahab-container.img mx8qx-ahab-container.imx8_defconfig + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin + $ sh imx-seco-3.7.4.bin + $ cp imx-seco-3.7.4/firmware/seco/mx8qxb0-ahab-container.img $(builddir)/mx8qx-ahab-container.img Build U-Boot ------------ @@ -58,7 +61,7 @@ to your host and execute uuu: .. code-block:: bash - sudo ./uuu u-boot/u-boot-dtb.imx + sudo ./uuu $(builddir)/u-boot-dtb.imx Flash the U-Boot Binary into the eMMC ------------------------------------- |