1 files changed, 111 insertions, 0 deletions
diff --git a/doc/board/toradex/verdin-imx8mp.rst b/doc/board/toradex/verdin-imx8mp.rst
new file mode 100644
index 0000000000..482f693577
--- /dev/null
+++ b/doc/board/toradex/verdin-imx8mp.rst
@@ -0,0 +1,111 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Verdin iMX8M Plus Module
+========================
+
+Quick Start
+-----------
+
+- Build the ARM trusted firmware binary
+- Get the DDR firmware
+- Build U-Boot
+- Flash to eMMC
+- Boot
+
+Get and Build the ARM Trusted Firmware (Trusted Firmware A)
+-----------------------------------------------------------
+
+.. code-block:: bash
+
+    $ echo "Downloading and building TF-A..."
+    $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+    $ cd trusted-firmware-a
+
+Then build ATF (TF-A):
+
+.. code-block:: bash
+
+    $ export CROSS_COMPILE=aarch64-linux-gnu-
+    $ make PLAT=imx8mp IMX_BOOT_UART_BASE=0x30880000 bl31
+    $ cp build/imx8mp/release/bl31.bin ../
+
+Get the DDR Firmware
+--------------------
+
+.. code-block:: bash
+
+    $ cd ..
+    $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.10.1.bin
+    $ chmod +x firmware-imx-8.10.1.bin
+    $ ./firmware-imx-8.10.1.bin
+    $ cp firmware-imx-8.10.1/firmware/ddr/synopsys/lpddr4*_202006.bin ./
+
+Build U-Boot
+------------
+.. code-block:: bash
+
+    $ export CROSS_COMPILE=aarch64-linux-gnu-
+    $ make verdin-imx8mp_defconfig
+    $ make
+
+Flash to eMMC
+-------------
+
+.. code-block:: bash
+
+    > tftpboot ${loadaddr} flash.bin
+    > setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
+    > mmc dev 2 1 && mmc write ${loadaddr} 0x0 ${blkcnt}
+
+As a convenience, instead of the last two commands one may also use the update
+U-Boot wrapper:
+
+.. code-block:: bash
+
+    > run update_uboot
+
+Boot
+----
+
+ATF, U-Boot proper and u-boot.dtb images are packed into FIT image,
+which is loaded and parsed by SPL.
+
+Boot sequence is:
+
+* SPL ---> ATF (TF-A) ---> U-Boot proper
+
+Output:
+
+.. code-block:: bash
+
+U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
+Quad die, dual rank failed, attempting dual die, single rank configuration.
+Normal Boot
+WDT:   Started watchdog@30280000 with servicing (60s timeout)
+Trying to boot from BOOTROM
+Find img info 0x&48025a00, size 872
+Need continue download 1024
+Download 779264, Total size 780424
+NOTICE:  BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b
+NOTICE:  BL31: Built : 16:52:37, Aug 26 2021
+
+
+U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100)
+
+CPU:   Freescale i.MX8MP[8] rev1.1 at 1200 MHz
+Reset cause: POR
+DRAM:  8 GiB
+Core:  78 devices, 18 uclasses, devicetree: separate
+WDT:   Started watchdog@30280000 with servicing (60s timeout)
+MMC:   FSL_SDHC: 1, FSL_SDHC: 2
+Loading Environment from MMC... OK
+In:    serial
+Out:   serial
+Err:   serial
+Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281
+Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609
+Setting variant to wifi
+Net:   Hard-coding pdata->enetaddr
+eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME]
+Hit any key to stop autoboot:  0
+Verdin iMX8MP #