summaryrefslogtreecommitdiff
path: root/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt')
-rw-r--r--doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt67
1 files changed, 67 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt
new file mode 100644
index 0000000000..8e7357d53d
--- /dev/null
+++ b/doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt
@@ -0,0 +1,67 @@
+RK3368 dynamic memory controller driver
+=======================================
+
+The RK3368 DMC (dynamic memory controller) driver supports setup/initialisation
+during TPL using configuration data from the DTS (i.e. OF_PLATDATA), based on
+the following key configuration data:
+ (a) a target-frequency (i.e. operating point) for the memory operation
+ (b) a speed-bin (as defined in JESD-79) for the DDR3 used in hardware
+ (c) a memory-schedule (i.e. mapping from physical addresses to the address
+ pins of the memory bus)
+
+Required properties
+-------------------
+
+- compatible: "rockchip,rk3368-dmc"
+- reg
+ protocol controller (PCTL) address and PHY controller (DDRPHY) address
+- rockchip,ddr-speed-bin
+ the DDR3 device's speed-bin (as specified according to JESD-79)
+ DDR3_800D (5-5-5)
+ DDR3_800E (6-6-6)
+ DDR3_1066E (6-6-6)
+ DDR3_1066F (7-7-7)
+ DDR3_1066G (8-8-8)
+ DDR3_1333F (7-7-7)
+ DDR3_1333G (8-8-8)
+ DDR3_1333H (9-9-9)
+ DDR3_1333J (10-10-10)
+ DDR3_1600G (8-8-8)
+ DDR3_1600H (9-9-9)
+ DDR3_1600J (10-10-10)
+ DDR3_1600K (11-11-11)
+ DDR3_1866J (10-10-10)
+ DDR3_1866K (11-11-11)
+ DDR3_1866L (12-12-12)
+ DDR3_1866M (13-13-13)
+ DDR3_2133K (11-11-11)
+ DDR3_2133L (12-12-12)
+ DDR3_2133M (13-13-13)
+ DDR3_2133N (14-14-14)
+- rockchip,ddr-frequency:
+ target DDR clock frequency in Hz (not all frequencies may be supported,
+ as there's some cooperation from the clock-driver required)
+- rockchip,memory-schedule:
+ controls the decoding of physical addresses to DRAM addressing (i.e. how
+ the physical address maps onto the address pins/chip-select of the device)
+ DMC_MSCH_CBDR: column -> bank -> device -> row
+ DMC_MSCH_CBRD: column -> band -> row -> device
+ DMC_MSCH_CRBD: column -> row -> band -> device
+
+Example (for DDR3-1600K and 800MHz)
+-----------------------------------
+
+ #include <dt-bindings/memory/rk3368-dmc.h>
+
+ dmc: dmc@ff610000 {
+ u-boot,dm-pre-reloc;
+ compatible = "rockchip,rk3368-dmc";
+ reg = <0 0xff610000 0 0x400
+ 0 0xff620000 0 0x400>;
+ };
+
+ &dmc {
+ rockchip,ddr-speed-bin = <DDR3_1600K>;
+ rockchip,ddr-frequency = <800000000>;
+ rockchip,memory-schedule = <DMC_MSCH_CBRD>;
+ };