diff options
Diffstat (limited to 'doc/device-tree-bindings/i2c/generic-acpi.txt')
-rw-r--r-- | doc/device-tree-bindings/i2c/generic-acpi.txt | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/i2c/generic-acpi.txt b/doc/device-tree-bindings/i2c/generic-acpi.txt new file mode 100644 index 0000000000..3510a71b57 --- /dev/null +++ b/doc/device-tree-bindings/i2c/generic-acpi.txt @@ -0,0 +1,42 @@ +I2C generic device +================== + +This is used only to generate ACPI tables for an I2C device. + +Required properties : + + - compatible : "i2c-chip"; + - reg : I2C chip address + - acpi,hid : HID name for the device + +Optional properies in addition to device.txt: + + - reset-gpios : GPIO used to assert reset to the device + - irq-gpios : GPIO used for interrupt (if Interrupt is not used) + - stop-gpios : GPIO used to stop the device + - interrupts-extended : Interrupt to use for the device + - reset-delay-ms : Delay after de-asserting reset, in ms + - reset-off-delay-ms : Delay after asserting reset (during power off) + - enable-delay-ms : Delay after asserting enable + - enable-off-delay-ms : Delay after de-asserting enable (during power off) + - stop-delay-ms : Delay after de-aserting stop + - stop-off-delay-ms : Delay after asserting stop (during power off) + - hid-descr-addr : HID register offset (for Human Interface Devices) + +Example +------- + + elan-touchscreen@10 { + compatible = "i2c-chip"; + reg = <0x10>; + acpi,hid = "ELAN0001"; + acpi,ddn = "ELAN Touchscreen"; + interrupts-extended = <&acpi_gpe GPIO_21_IRQ + IRQ_TYPE_EDGE_FALLING>; + linux,probed; + reset-gpios = <&gpio_n GPIO_36 GPIO_ACTIVE_HIGH>; + reset-delay-ms = <20>; + enable-gpios = <&gpio_n GPIO_152 GPIO_ACTIVE_HIGH>; + enable-delay-ms = <1>; + acpi,has-power-resource; + }; |